From: Sergiu Moga <sergiu.moga@microchip.com> To: <a.zummo@towertech.it>, <alexandre.belloni@bootlin.com>, <robh+dt@kernel.org>, <krzysztof.kozlowski@canonical.com>, <nicolas.ferre@microchip.com>, <claudiu.beznea@microchip.com> Cc: <linux-rtc@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, Sergiu Moga <sergiu.moga@microchip.com> Subject: [PATCH v2 0/5] dt-bindings: rtc: convert at91sam9 bindings to Date: Thu, 3 Mar 2022 16:06:21 +0200 [thread overview] Message-ID: <20220303140626.38129-1-sergiu.moga@microchip.com> (raw) This patch series addresses the conversion of the RTC binding for Atmel/Microchip SoCs to Device Tree Schema format. It also changes the node names from some of the "dtsi" files from "rtt" to the more generic "rtc", while moving some of the specific properties from the "dts" files to the "dtsi" files as well as adding this required property to the "dtsi" files that were missing it. Changes since v1: - Add the "start-year" property as suggested by Alexandre Belloni - Fix the errors generated from not using the more generic "rtc" node name for the example of the binding, as suggested by Krzysztof Kozlowski - Replace the "uint32-array" type of the "atmel,rtt-rtc-time-reg" property with "syscon", as suggested by Krzysztof Kozlowski - Move the "atmel,rtt-rtc-time-reg" property from some of the Atmel/Microchip board files to the SoC files - Add the "atmel,rtt-rtc-time-reg" required property to the Atmel/Microchip SoC files that were missing it - Use the more generic "rtc" node name inside the Atmel/Microchip SoC files that were using "rtt" instead - Add SAMA7G5 compatible strings list to the DT binding Sergiu Moga (5): ARM: dts: at91: Move rtt node properties from "dts" file to "dtsi" file ARM: dts: at91: Add the required `atmel,rtt-rtc-time-reg` property ARM: dts: at91: Use the generic "rtc" node name for the rtt IPs dt-bindings: rtc: convert at91sam9 bindings to json-schema dt-bindings: rtc: at91: Add SAMA7G5 compatible strings list .../bindings/rtc/atmel,at91sam9-rtc.txt | 25 ------- .../bindings/rtc/atmel,at91sam9-rtc.yaml | 65 +++++++++++++++++++ arch/arm/boot/dts/at91-sam9x60ek.dts | 5 -- arch/arm/boot/dts/at91-sama7g5ek.dts | 4 -- arch/arm/boot/dts/at91sam9260.dtsi | 1 + arch/arm/boot/dts/at91sam9260ek.dts | 1 - arch/arm/boot/dts/at91sam9261.dtsi | 1 + arch/arm/boot/dts/at91sam9263.dtsi | 2 + arch/arm/boot/dts/at91sam9g45.dtsi | 1 + arch/arm/boot/dts/at91sam9m10g45ek.dts | 1 - arch/arm/boot/dts/at91sam9rl.dtsi | 1 + arch/arm/boot/dts/sam9x60.dtsi | 3 +- arch/arm/boot/dts/sama7g5.dtsi | 3 +- 13 files changed, 75 insertions(+), 38 deletions(-) delete mode 100644 Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt create mode 100644 Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.yaml -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Sergiu Moga <sergiu.moga@microchip.com> To: <a.zummo@towertech.it>, <alexandre.belloni@bootlin.com>, <robh+dt@kernel.org>, <krzysztof.kozlowski@canonical.com>, <nicolas.ferre@microchip.com>, <claudiu.beznea@microchip.com> Cc: <linux-rtc@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, Sergiu Moga <sergiu.moga@microchip.com> Subject: [PATCH v2 0/5] dt-bindings: rtc: convert at91sam9 bindings to Date: Thu, 3 Mar 2022 16:06:21 +0200 [thread overview] Message-ID: <20220303140626.38129-1-sergiu.moga@microchip.com> (raw) This patch series addresses the conversion of the RTC binding for Atmel/Microchip SoCs to Device Tree Schema format. It also changes the node names from some of the "dtsi" files from "rtt" to the more generic "rtc", while moving some of the specific properties from the "dts" files to the "dtsi" files as well as adding this required property to the "dtsi" files that were missing it. Changes since v1: - Add the "start-year" property as suggested by Alexandre Belloni - Fix the errors generated from not using the more generic "rtc" node name for the example of the binding, as suggested by Krzysztof Kozlowski - Replace the "uint32-array" type of the "atmel,rtt-rtc-time-reg" property with "syscon", as suggested by Krzysztof Kozlowski - Move the "atmel,rtt-rtc-time-reg" property from some of the Atmel/Microchip board files to the SoC files - Add the "atmel,rtt-rtc-time-reg" required property to the Atmel/Microchip SoC files that were missing it - Use the more generic "rtc" node name inside the Atmel/Microchip SoC files that were using "rtt" instead - Add SAMA7G5 compatible strings list to the DT binding Sergiu Moga (5): ARM: dts: at91: Move rtt node properties from "dts" file to "dtsi" file ARM: dts: at91: Add the required `atmel,rtt-rtc-time-reg` property ARM: dts: at91: Use the generic "rtc" node name for the rtt IPs dt-bindings: rtc: convert at91sam9 bindings to json-schema dt-bindings: rtc: at91: Add SAMA7G5 compatible strings list .../bindings/rtc/atmel,at91sam9-rtc.txt | 25 ------- .../bindings/rtc/atmel,at91sam9-rtc.yaml | 65 +++++++++++++++++++ arch/arm/boot/dts/at91-sam9x60ek.dts | 5 -- arch/arm/boot/dts/at91-sama7g5ek.dts | 4 -- arch/arm/boot/dts/at91sam9260.dtsi | 1 + arch/arm/boot/dts/at91sam9260ek.dts | 1 - arch/arm/boot/dts/at91sam9261.dtsi | 1 + arch/arm/boot/dts/at91sam9263.dtsi | 2 + arch/arm/boot/dts/at91sam9g45.dtsi | 1 + arch/arm/boot/dts/at91sam9m10g45ek.dts | 1 - arch/arm/boot/dts/at91sam9rl.dtsi | 1 + arch/arm/boot/dts/sam9x60.dtsi | 3 +- arch/arm/boot/dts/sama7g5.dtsi | 3 +- 13 files changed, 75 insertions(+), 38 deletions(-) delete mode 100644 Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt create mode 100644 Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.yaml -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-03-03 14:12 UTC|newest] Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-03-03 14:06 Sergiu Moga [this message] 2022-03-03 14:06 ` [PATCH v2 0/5] dt-bindings: rtc: convert at91sam9 bindings to Sergiu Moga 2022-03-03 14:06 ` [PATCH v2 1/5] ARM: dts: at91: Move rtt node properties from "dts" file to "dtsi" file Sergiu Moga 2022-03-03 14:06 ` Sergiu Moga 2022-03-03 16:07 ` Alexandre Belloni 2022-03-03 16:07 ` Alexandre Belloni 2022-03-04 13:10 ` Sergiu.Moga 2022-03-04 13:10 ` Sergiu.Moga 2022-03-03 14:06 ` [PATCH v2 2/5] ARM: dts: at91: Add the required `atmel,rtt-rtc-time-reg` property Sergiu Moga 2022-03-03 14:06 ` [PATCH v2 2/5] ARM: dts: at91: Add the required `atmel, rtt-rtc-time-reg` property Sergiu Moga 2022-03-04 11:06 ` Tudor.Ambarus 2022-03-04 11:06 ` Tudor.Ambarus 2022-03-03 14:06 ` [PATCH v2 3/5] ARM: dts: at91: Use the generic "rtc" node name for the rtt IPs Sergiu Moga 2022-03-03 14:06 ` Sergiu Moga 2022-03-03 14:47 ` Krzysztof Kozlowski 2022-03-03 14:47 ` Krzysztof Kozlowski 2022-03-04 11:13 ` Tudor.Ambarus 2022-03-04 11:13 ` Tudor.Ambarus 2022-03-03 14:06 ` [PATCH v2 4/5] dt-bindings: rtc: convert at91sam9 bindings to json-schema Sergiu Moga 2022-03-03 14:06 ` Sergiu Moga 2022-03-03 14:21 ` Krzysztof Kozlowski 2022-03-03 14:21 ` Krzysztof Kozlowski 2022-03-04 13:17 ` Sergiu.Moga 2022-03-04 13:17 ` Sergiu.Moga 2022-03-03 14:06 ` [PATCH v2 5/5] dt-bindings: rtc: at91: Add SAMA7G5 compatible strings list Sergiu Moga 2022-03-03 14:06 ` Sergiu Moga 2022-03-03 14:48 ` Krzysztof Kozlowski 2022-03-03 14:48 ` Krzysztof Kozlowski
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220303140626.38129-1-sergiu.moga@microchip.com \ --to=sergiu.moga@microchip.com \ --cc=a.zummo@towertech.it \ --cc=alexandre.belloni@bootlin.com \ --cc=claudiu.beznea@microchip.com \ --cc=devicetree@vger.kernel.org \ --cc=krzysztof.kozlowski@canonical.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-rtc@vger.kernel.org \ --cc=nicolas.ferre@microchip.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.