From: Rob Herring <robh@kernel.org> To: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <festevam@gmail.com>, NXP Linux Team <linux-imx@nxp.com> Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH] arm64: dts: imx: Fix imx8*-var-som touchscreen property sizes Date: Fri, 4 Mar 2022 14:25:27 -0600 [thread overview] Message-ID: <20220304202527.316532-1-robh@kernel.org> (raw) The common touchscreen properties are all 32-bit, not 16-bit. These properties must not be too important as they are all ignored in case of an error reading them. Signed-off-by: Rob Herring <robh@kernel.org> --- arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi | 8 ++++---- arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi | 8 ++++---- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi index 1dc9d187601c..a0bd540f27d3 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi @@ -89,12 +89,12 @@ touchscreen@0 { pendown-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <125>; - touchscreen-size-x = /bits/ 16 <4008>; + touchscreen-size-x = <4008>; ti,y-min = /bits/ 16 <282>; - touchscreen-size-y = /bits/ 16 <3864>; + touchscreen-size-y = <3864>; ti,x-plate-ohms = /bits/ 16 <180>; - touchscreen-max-pressure = /bits/ 16 <255>; - touchscreen-average-samples = /bits/ 16 <10>; + touchscreen-max-pressure = <255>; + touchscreen-average-samples = <10>; ti,debounce-tol = /bits/ 16 <3>; ti,debounce-rep = /bits/ 16 <1>; ti,settle-delay-usec = /bits/ 16 <150>; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi index b16c7caf34c1..87b5e23c766f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi @@ -70,12 +70,12 @@ touchscreen@0 { pendown-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <125>; - touchscreen-size-x = /bits/ 16 <4008>; + touchscreen-size-x = <4008>; ti,y-min = /bits/ 16 <282>; - touchscreen-size-y = /bits/ 16 <3864>; + touchscreen-size-y = <3864>; ti,x-plate-ohms = /bits/ 16 <180>; - touchscreen-max-pressure = /bits/ 16 <255>; - touchscreen-average-samples = /bits/ 16 <10>; + touchscreen-max-pressure = <255>; + touchscreen-average-samples = <10>; ti,debounce-tol = /bits/ 16 <3>; ti,debounce-rep = /bits/ 16 <1>; ti,settle-delay-usec = /bits/ 16 <150>; -- 2.32.0
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org> To: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <festevam@gmail.com>, NXP Linux Team <linux-imx@nxp.com> Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH] arm64: dts: imx: Fix imx8*-var-som touchscreen property sizes Date: Fri, 4 Mar 2022 14:25:27 -0600 [thread overview] Message-ID: <20220304202527.316532-1-robh@kernel.org> (raw) The common touchscreen properties are all 32-bit, not 16-bit. These properties must not be too important as they are all ignored in case of an error reading them. Signed-off-by: Rob Herring <robh@kernel.org> --- arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi | 8 ++++---- arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi | 8 ++++---- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi index 1dc9d187601c..a0bd540f27d3 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi @@ -89,12 +89,12 @@ touchscreen@0 { pendown-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <125>; - touchscreen-size-x = /bits/ 16 <4008>; + touchscreen-size-x = <4008>; ti,y-min = /bits/ 16 <282>; - touchscreen-size-y = /bits/ 16 <3864>; + touchscreen-size-y = <3864>; ti,x-plate-ohms = /bits/ 16 <180>; - touchscreen-max-pressure = /bits/ 16 <255>; - touchscreen-average-samples = /bits/ 16 <10>; + touchscreen-max-pressure = <255>; + touchscreen-average-samples = <10>; ti,debounce-tol = /bits/ 16 <3>; ti,debounce-rep = /bits/ 16 <1>; ti,settle-delay-usec = /bits/ 16 <150>; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi index b16c7caf34c1..87b5e23c766f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi @@ -70,12 +70,12 @@ touchscreen@0 { pendown-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <125>; - touchscreen-size-x = /bits/ 16 <4008>; + touchscreen-size-x = <4008>; ti,y-min = /bits/ 16 <282>; - touchscreen-size-y = /bits/ 16 <3864>; + touchscreen-size-y = <3864>; ti,x-plate-ohms = /bits/ 16 <180>; - touchscreen-max-pressure = /bits/ 16 <255>; - touchscreen-average-samples = /bits/ 16 <10>; + touchscreen-max-pressure = <255>; + touchscreen-average-samples = <10>; ti,debounce-tol = /bits/ 16 <3>; ti,debounce-rep = /bits/ 16 <1>; ti,settle-delay-usec = /bits/ 16 <150>; -- 2.32.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-03-04 20:25 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-03-04 20:25 Rob Herring [this message] 2022-03-04 20:25 ` [PATCH] arm64: dts: imx: Fix imx8*-var-som touchscreen property sizes Rob Herring 2022-04-09 3:09 ` Shawn Guo 2022-04-09 3:09 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220304202527.316532-1-robh@kernel.org \ --to=robh@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=krzysztof.kozlowski@canonical.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.