[PATCH v2] m68k: coldfire/device.c: only build for MCF_EDMA when xyz

[PATCH v2] m68k: coldfire/device.c: only build for MCF_EDMA when xyz

[Randy Dunlap]

When CONFIG_MCF_EDMA is set (due to COMPILE_TEST, not due to
CONFIG_M5441x), coldfire/device.c has compile errors due to
missing MCFEDMA_* symbols. In the .config file that was provided,
CONFIG_M5206=y, not CONFIG_M5441x, so <asm/m5441xsim.h> is not
included in coldfire/device.c.

Only build the MCF_EDMA code in coldfire/device.c if the MCFEDMA_*
hardware macros are defined.

Fixes these build errors:

../arch/m68k/coldfire/device.c:512:35: error: 'MCFEDMA_BASE' undeclared here (not in a function); did you mean 'MCFDMA_BASE1'?
  512 |                 .start          = MCFEDMA_BASE,
../arch/m68k/coldfire/device.c:513:50: error: 'MCFEDMA_SIZE' undeclared here (not in a function)
  513 |                 .end            = MCFEDMA_BASE + MCFEDMA_SIZE - 1,
../arch/m68k/coldfire/device.c:517:35: error: 'MCFEDMA_IRQ_INTR0' undeclared here (not in a function)
  517 |                 .start          = MCFEDMA_IRQ_INTR0,
../arch/m68k/coldfire/device.c:523:35: error: 'MCFEDMA_IRQ_INTR16' undeclared here (not in a function)
  523 |                 .start          = MCFEDMA_IRQ_INTR16,
../arch/m68k/coldfire/device.c:529:35: error: 'MCFEDMA_IRQ_INTR56' undeclared here (not in a function)
  529 |                 .start          = MCFEDMA_IRQ_INTR56,
../arch/m68k/coldfire/device.c:535:35: error: 'MCFEDMA_IRQ_ERR' undeclared here (not in a function)
  535 |                 .start          = MCFEDMA_IRQ_ERR,

Fixes: d7e9d01ac292 ("m68k: add ColdFire mcf5441x eDMA platform support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: lore.kernel.org/r/202203030252.P752DK46-lkp@intel.com
Cc: Angelo Dureghello <angelo@sysam.it>
Cc: Greg Ungerer <gerg@kernel.org>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Cc: uclinux-dev@uclinux.org
---
v2: only build when the hardware macros are defined (suggested by Geert)

 arch/m68k/coldfire/device.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- linux-next-20220303.orig/arch/m68k/coldfire/device.c
+++ linux-next-20220303/arch/m68k/coldfire/device.c
@@ -480,7 +480,7 @@ static struct platform_device mcf_i2c5 =
 #endif /* MCFI2C_BASE5 */
 #endif /* IS_ENABLED(CONFIG_I2C_IMX) */
 
-#if IS_ENABLED(CONFIG_MCF_EDMA)
+#ifdef MCFEDMA_BASE
 
 static const struct dma_slave_map mcf_edma_map[] = {
 	{ "dreq0", "rx-tx", MCF_EDMA_FILTER_PARAM(0) },
@@ -552,7 +552,7 @@ static struct platform_device mcf_edma =
 		.platform_data = &mcf_edma_data,
 	}
 };
-#endif /* IS_ENABLED(CONFIG_MCF_EDMA) */
+#endif /* MCFEDMA_BASE */
 
 #ifdef MCFSDHC_BASE
 static struct mcf_esdhc_platform_data mcf_esdhc_data = {
@@ -651,7 +651,7 @@ static struct platform_device *mcf_devic
 	&mcf_i2c5,
 #endif
 #endif
-#if IS_ENABLED(CONFIG_MCF_EDMA)
+#ifdef MCFEDMA_BASE
 	&mcf_edma,
 #endif
 #ifdef MCFSDHC_BASE