[PATCH v5 0/2] mac80211: Trigger disconnect for STA during target hardware restart

[PATCH v5 0/2] mac80211: Trigger disconnect for STA during target hardware restart

[Youghandhar Chintala]

Currently in case of target hardware restart ,we just reconfig and
re-enable the security keys and enable the network queues to start
data traffic back from where it was interrupted.

Many ath10k wifi chipsets have sequence numbers for the data
packets assigned by firmware and the mac sequence number will
restart from zero after target hardware restart leading to mismatch
in the sequence number expected by the remote peer vs the sequence
number of the frame sent by the target firmware.

This mismatch in sequence number will cause out-of-order packets
on the remote peer and all the frames sent by the device are dropped
until we reach the sequence number which was sent before we restarted
the target hardware

In order to fix this, we trigger a disconnect in case of hardware
restart. After this there will be a fresh connection and thereby
avoiding the dropping of frames by remote peer.

The right fix would be to pull the entire data path into the host
which is not feasible or would need lots of complex/inefficient
datapath changes.

---
Changes from v3:
- Fixed commit text errors
- Remove excess space in "hardware  restart"
- Removed blank line between the function description and the arguments

Youghandhar Chintala (2):
  mac80211: Add support to trigger sta disconnect on  hardware restart
  ath10k: Trigger sta disconnect on hardware restart

 drivers/net/wireless/ath/ath10k/core.c | 25 +++++++++++++++++++
 drivers/net/wireless/ath/ath10k/hw.h   |  2 ++
 include/net/mac80211.h                 | 10 ++++++++
 net/mac80211/ieee80211_i.h             |  3 +++
 net/mac80211/mlme.c                    | 12 ++++++++++
 net/mac80211/util.c                    | 33 +++++++++++++++++++++++---
 6 files changed, 82 insertions(+), 3 deletions(-)

-- 
2.29.0

[PATCH v5 0/2] mac80211: Trigger disconnect for STA during target hardware restart

[Youghandhar Chintala]

Currently in case of target hardware restart ,we just reconfig and
re-enable the security keys and enable the network queues to start
data traffic back from where it was interrupted.

Many ath10k wifi chipsets have sequence numbers for the data
packets assigned by firmware and the mac sequence number will
restart from zero after target hardware restart leading to mismatch
in the sequence number expected by the remote peer vs the sequence
number of the frame sent by the target firmware.

This mismatch in sequence number will cause out-of-order packets
on the remote peer and all the frames sent by the device are dropped
until we reach the sequence number which was sent before we restarted
the target hardware

In order to fix this, we trigger a disconnect in case of hardware
restart. After this there will be a fresh connection and thereby
avoiding the dropping of frames by remote peer.

The right fix would be to pull the entire data path into the host
which is not feasible or would need lots of complex/inefficient
datapath changes.

---
Changes from v3:
- Fixed commit text errors
- Remove excess space in "hardware  restart"
- Removed blank line between the function description and the arguments

Youghandhar Chintala (2):
  mac80211: Add support to trigger sta disconnect on  hardware restart
  ath10k: Trigger sta disconnect on hardware restart

 drivers/net/wireless/ath/ath10k/core.c | 25 +++++++++++++++++++
 drivers/net/wireless/ath/ath10k/hw.h   |  2 ++
 include/net/mac80211.h                 | 10 ++++++++
 net/mac80211/ieee80211_i.h             |  3 +++
 net/mac80211/mlme.c                    | 12 ++++++++++
 net/mac80211/util.c                    | 33 +++++++++++++++++++++++---
 6 files changed, 82 insertions(+), 3 deletions(-)

-- 
2.29.0


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH v5 1/2] mac80211: Add support to trigger sta disconnect on hardware restart

[Youghandhar Chintala]

Currently in case of target hardware restart, we just reconfig and
re-enable the security keys and enable the network queues to start
data traffic back from where it was interrupted.

Many ath10k wifi chipsets have sequence numbers for the data
packets assigned by firmware and the mac sequence number will
restart from zero after target hardware restart leading to mismatch
in the sequence number expected by the remote peer vs the sequence
number of the frame sent by the target firmware.

This mismatch in sequence number will cause out-of-order packets
on the remote peer and all the frames sent by the device are dropped
until we reach the sequence number which was sent before we restarted
the target hardware

In order to fix this, we trigger a sta disconnect, in case of target
hw restart. After this there will be a fresh connection and thereby
avoiding the dropping of frames by remote peer.

The right fix would be to pull the entire data path into the host
which is not feasible or would need lots of complex changes and
will still be inefficient.

Tested on ath10k using WCN3990, QCA6174

Signed-off-by: Youghandhar Chintala <youghand@codeaurora.org>
---
 include/net/mac80211.h     | 10 ++++++++++
 net/mac80211/ieee80211_i.h |  3 +++
 net/mac80211/mlme.c        | 12 ++++++++++++
 net/mac80211/util.c        | 33 ++++++++++++++++++++++++++++++---
 4 files changed, 55 insertions(+), 3 deletions(-)

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index bd6912d0292b..2f9236e8e33d 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -6064,6 +6064,16 @@ void ieee80211_disconnect(struct ieee80211_vif *vif, bool reconnect);
  */
 void ieee80211_resume_disconnect(struct ieee80211_vif *vif);
 
+/**
+ * ieee80211_hw_restart_disconnect - disconnect from AP after
+ * hardware restart
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * Instructs mac80211 to disconnect from the AP after
+ * hardware restart.
+ */
+void ieee80211_hw_restart_disconnect(struct ieee80211_vif *vif);
+
 /**
  * ieee80211_cqm_rssi_notify - inform a configured connection quality monitoring
  *	rssi threshold triggered
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index da35791b8378..7819cdf7ddfa 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -765,6 +765,8 @@ struct ieee80211_if_mesh {
  *	back to wireless media and to the local net stack.
  * @IEEE80211_SDATA_DISCONNECT_RESUME: Disconnect after resume.
  * @IEEE80211_SDATA_IN_DRIVER: indicates interface was added to driver
+ * @IEEE80211_SDATA_DISCONNECT_HW_RESTART: Disconnect after hardware restart
+ *  recovery
  */
 enum ieee80211_sub_if_data_flags {
 	IEEE80211_SDATA_ALLMULTI		= BIT(0),
@@ -772,6 +774,7 @@ enum ieee80211_sub_if_data_flags {
 	IEEE80211_SDATA_DONT_BRIDGE_PACKETS	= BIT(3),
 	IEEE80211_SDATA_DISCONNECT_RESUME	= BIT(4),
 	IEEE80211_SDATA_IN_DRIVER		= BIT(5),
+	IEEE80211_SDATA_DISCONNECT_HW_RESTART	= BIT(6),
 };
 
 /**
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 20b57ddf149c..7e5be39dc6cc 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -4863,6 +4863,18 @@ void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
 		sdata_unlock(sdata);
 		return;
 	}
+
+	if (sdata->flags & IEEE80211_SDATA_DISCONNECT_HW_RESTART) {
+		sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_HW_RESTART;
+		mlme_dbg(sdata, "driver requested disconnect after hardware restart\n");
+		ieee80211_sta_connection_lost(sdata,
+					      ifmgd->associated->bssid,
+					      WLAN_REASON_UNSPECIFIED,
+					      true);
+		sdata_unlock(sdata);
+		return;
+	}
+
 	sdata_unlock(sdata);
 }
 #endif
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index abc29df6834c..4b791f94751f 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -2321,6 +2321,7 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 	struct cfg80211_sched_scan_request *sched_scan_req;
 	bool sched_scan_stopped = false;
 	bool suspended = local->suspended;
+	bool in_reconfig = false;
 
 	/* nothing to do if HW shouldn't run */
 	if (!local->open_count)
@@ -2672,6 +2673,7 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 		drv_reconfig_complete(local, IEEE80211_RECONFIG_TYPE_RESTART);
 
 	if (local->in_reconfig) {
+		in_reconfig = local->in_reconfig;
 		local->in_reconfig = false;
 		barrier();
 
@@ -2689,6 +2691,15 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 					IEEE80211_QUEUE_STOP_REASON_SUSPEND,
 					false);
 
+	if (in_reconfig) {
+		list_for_each_entry(sdata, &local->interfaces, list) {
+			if (!ieee80211_sdata_running(sdata))
+				continue;
+			if (sdata->vif.type == NL80211_IFTYPE_STATION)
+				ieee80211_sta_restart(sdata);
+		}
+	}
+
 	if (!suspended)
 		return 0;
 
@@ -2718,7 +2729,7 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 	return 0;
 }
 
-void ieee80211_resume_disconnect(struct ieee80211_vif *vif)
+static void ieee80211_reconfig_disconnect(struct ieee80211_vif *vif, u8 flag)
 {
 	struct ieee80211_sub_if_data *sdata;
 	struct ieee80211_local *local;
@@ -2730,19 +2741,35 @@ void ieee80211_resume_disconnect(struct ieee80211_vif *vif)
 	sdata = vif_to_sdata(vif);
 	local = sdata->local;
 
-	if (WARN_ON(!local->resuming))
+	if (WARN_ON(flag & IEEE80211_SDATA_DISCONNECT_RESUME &&
+		    !local->resuming))
+		return;
+
+	if (WARN_ON(flag & IEEE80211_SDATA_DISCONNECT_HW_RESTART &&
+		    !local->in_reconfig))
 		return;
 
 	if (WARN_ON(vif->type != NL80211_IFTYPE_STATION))
 		return;
 
-	sdata->flags |= IEEE80211_SDATA_DISCONNECT_RESUME;
+	sdata->flags |= flag;
 
 	mutex_lock(&local->key_mtx);
 	list_for_each_entry(key, &sdata->key_list, list)
 		key->flags |= KEY_FLAG_TAINTED;
 	mutex_unlock(&local->key_mtx);
 }
+
+void ieee80211_hw_restart_disconnect(struct ieee80211_vif *vif)
+{
+	ieee80211_reconfig_disconnect(vif, IEEE80211_SDATA_DISCONNECT_HW_RESTART);
+}
+EXPORT_SYMBOL_GPL(ieee80211_hw_restart_disconnect);
+
+void ieee80211_resume_disconnect(struct ieee80211_vif *vif)
+{
+	ieee80211_reconfig_disconnect(vif, IEEE80211_SDATA_DISCONNECT_RESUME);
+}
 EXPORT_SYMBOL_GPL(ieee80211_resume_disconnect);
 
 void ieee80211_recalc_smps(struct ieee80211_sub_if_data *sdata)
-- 
2.29.0

[PATCH v5 1/2] mac80211: Add support to trigger sta disconnect on hardware restart

[Youghandhar Chintala]

Currently in case of target hardware restart, we just reconfig and
re-enable the security keys and enable the network queues to start
data traffic back from where it was interrupted.

Many ath10k wifi chipsets have sequence numbers for the data
packets assigned by firmware and the mac sequence number will
restart from zero after target hardware restart leading to mismatch
in the sequence number expected by the remote peer vs the sequence
number of the frame sent by the target firmware.

This mismatch in sequence number will cause out-of-order packets
on the remote peer and all the frames sent by the device are dropped
until we reach the sequence number which was sent before we restarted
the target hardware

In order to fix this, we trigger a sta disconnect, in case of target
hw restart. After this there will be a fresh connection and thereby
avoiding the dropping of frames by remote peer.

The right fix would be to pull the entire data path into the host
which is not feasible or would need lots of complex changes and
will still be inefficient.

Tested on ath10k using WCN3990, QCA6174

Signed-off-by: Youghandhar Chintala <youghand@codeaurora.org>
---
 include/net/mac80211.h     | 10 ++++++++++
 net/mac80211/ieee80211_i.h |  3 +++
 net/mac80211/mlme.c        | 12 ++++++++++++
 net/mac80211/util.c        | 33 ++++++++++++++++++++++++++++++---
 4 files changed, 55 insertions(+), 3 deletions(-)

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index bd6912d0292b..2f9236e8e33d 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -6064,6 +6064,16 @@ void ieee80211_disconnect(struct ieee80211_vif *vif, bool reconnect);
  */
 void ieee80211_resume_disconnect(struct ieee80211_vif *vif);
 
+/**
+ * ieee80211_hw_restart_disconnect - disconnect from AP after
+ * hardware restart
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * Instructs mac80211 to disconnect from the AP after
+ * hardware restart.
+ */
+void ieee80211_hw_restart_disconnect(struct ieee80211_vif *vif);
+
 /**
  * ieee80211_cqm_rssi_notify - inform a configured connection quality monitoring
  *	rssi threshold triggered
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index da35791b8378..7819cdf7ddfa 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -765,6 +765,8 @@ struct ieee80211_if_mesh {
  *	back to wireless media and to the local net stack.
  * @IEEE80211_SDATA_DISCONNECT_RESUME: Disconnect after resume.
  * @IEEE80211_SDATA_IN_DRIVER: indicates interface was added to driver
+ * @IEEE80211_SDATA_DISCONNECT_HW_RESTART: Disconnect after hardware restart
+ *  recovery
  */
 enum ieee80211_sub_if_data_flags {
 	IEEE80211_SDATA_ALLMULTI		= BIT(0),
@@ -772,6 +774,7 @@ enum ieee80211_sub_if_data_flags {
 	IEEE80211_SDATA_DONT_BRIDGE_PACKETS	= BIT(3),
 	IEEE80211_SDATA_DISCONNECT_RESUME	= BIT(4),
 	IEEE80211_SDATA_IN_DRIVER		= BIT(5),
+	IEEE80211_SDATA_DISCONNECT_HW_RESTART	= BIT(6),
 };
 
 /**
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 20b57ddf149c..7e5be39dc6cc 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -4863,6 +4863,18 @@ void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
 		sdata_unlock(sdata);
 		return;
 	}
+
+	if (sdata->flags & IEEE80211_SDATA_DISCONNECT_HW_RESTART) {
+		sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_HW_RESTART;
+		mlme_dbg(sdata, "driver requested disconnect after hardware restart\n");
+		ieee80211_sta_connection_lost(sdata,
+					      ifmgd->associated->bssid,
+					      WLAN_REASON_UNSPECIFIED,
+					      true);
+		sdata_unlock(sdata);
+		return;
+	}
+
 	sdata_unlock(sdata);
 }
 #endif
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index abc29df6834c..4b791f94751f 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -2321,6 +2321,7 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 	struct cfg80211_sched_scan_request *sched_scan_req;
 	bool sched_scan_stopped = false;
 	bool suspended = local->suspended;
+	bool in_reconfig = false;
 
 	/* nothing to do if HW shouldn't run */
 	if (!local->open_count)
@@ -2672,6 +2673,7 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 		drv_reconfig_complete(local, IEEE80211_RECONFIG_TYPE_RESTART);
 
 	if (local->in_reconfig) {
+		in_reconfig = local->in_reconfig;
 		local->in_reconfig = false;
 		barrier();
 
@@ -2689,6 +2691,15 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 					IEEE80211_QUEUE_STOP_REASON_SUSPEND,
 					false);
 
+	if (in_reconfig) {
+		list_for_each_entry(sdata, &local->interfaces, list) {
+			if (!ieee80211_sdata_running(sdata))
+				continue;
+			if (sdata->vif.type == NL80211_IFTYPE_STATION)
+				ieee80211_sta_restart(sdata);
+		}
+	}
+
 	if (!suspended)
 		return 0;
 
@@ -2718,7 +2729,7 @@ int ieee80211_reconfig(struct ieee80211_local *local)
 	return 0;
 }
 
-void ieee80211_resume_disconnect(struct ieee80211_vif *vif)
+static void ieee80211_reconfig_disconnect(struct ieee80211_vif *vif, u8 flag)
 {
 	struct ieee80211_sub_if_data *sdata;
 	struct ieee80211_local *local;
@@ -2730,19 +2741,35 @@ void ieee80211_resume_disconnect(struct ieee80211_vif *vif)
 	sdata = vif_to_sdata(vif);
 	local = sdata->local;
 
-	if (WARN_ON(!local->resuming))
+	if (WARN_ON(flag & IEEE80211_SDATA_DISCONNECT_RESUME &&
+		    !local->resuming))
+		return;
+
+	if (WARN_ON(flag & IEEE80211_SDATA_DISCONNECT_HW_RESTART &&
+		    !local->in_reconfig))
 		return;
 
 	if (WARN_ON(vif->type != NL80211_IFTYPE_STATION))
 		return;
 
-	sdata->flags |= IEEE80211_SDATA_DISCONNECT_RESUME;
+	sdata->flags |= flag;
 
 	mutex_lock(&local->key_mtx);
 	list_for_each_entry(key, &sdata->key_list, list)
 		key->flags |= KEY_FLAG_TAINTED;
 	mutex_unlock(&local->key_mtx);
 }
+
+void ieee80211_hw_restart_disconnect(struct ieee80211_vif *vif)
+{
+	ieee80211_reconfig_disconnect(vif, IEEE80211_SDATA_DISCONNECT_HW_RESTART);
+}
+EXPORT_SYMBOL_GPL(ieee80211_hw_restart_disconnect);
+
+void ieee80211_resume_disconnect(struct ieee80211_vif *vif)
+{
+	ieee80211_reconfig_disconnect(vif, IEEE80211_SDATA_DISCONNECT_RESUME);
+}
 EXPORT_SYMBOL_GPL(ieee80211_resume_disconnect);
 
 void ieee80211_recalc_smps(struct ieee80211_sub_if_data *sdata)
-- 
2.29.0


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH v5 2/2] ath10k: Trigger sta disconnect on hardware restart

[Youghandhar Chintala]

Currently after the hardware restart triggered from the driver,
the station interface connection remains intact, since a disconnect
trigger is not sent to userspace. This can lead to a problem in
targets where the wifi mac sequence is added by the firmware.

After the target restart, its wifi mac sequence number gets
reset to zero. Hence AP to which our device is connected will receive
frames with a  wifi mac sequence number jump to the past, thereby
resulting in the AP dropping all these frames, until the frame
arrives with a wifi mac sequence number which AP was expecting.

To avoid such frame drops, its better to trigger a station disconnect
upon target hardware restart which can be done with API
ieee80211_reconfig_disconnect exposed to mac80211.

The other targets are not affected by this change, since the hardware
params flag is not set.

Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1
Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00048

Signed-off-by: Youghandhar Chintala <youghand@codeaurora.org>
---
 drivers/net/wireless/ath/ath10k/core.c | 25 +++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/hw.h   |  2 ++
 2 files changed, 27 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 9e1f483e1362..2092bfd02cd1 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -94,6 +94,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = true,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA988X_HW_2_0_VERSION,
@@ -131,6 +132,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = true,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA9887_HW_1_0_VERSION,
@@ -169,6 +171,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = false,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA6174_HW_3_2_VERSION,
@@ -202,6 +205,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.bmi_large_size_download = true,
 		.supports_peer_stats_info = true,
 		.dynamic_sar_support = true,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA6174_HW_2_1_VERSION,
@@ -239,6 +243,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = false,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA6174_HW_2_1_VERSION,
@@ -276,6 +281,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = false,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA6174_HW_3_0_VERSION,
@@ -313,6 +319,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = false,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA6174_HW_3_2_VERSION,
@@ -354,6 +361,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.tx_stats_over_pktlog = false,
 		.supports_peer_stats_info = true,
 		.dynamic_sar_support = true,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA99X0_HW_2_0_DEV_VERSION,
@@ -397,6 +405,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = false,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA9984_HW_1_0_DEV_VERSION,
@@ -447,6 +456,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = false,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA9888_HW_2_0_DEV_VERSION,
@@ -494,6 +504,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = false,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA9377_HW_1_0_DEV_VERSION,
@@ -531,6 +542,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = false,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA9377_HW_1_1_DEV_VERSION,
@@ -570,6 +582,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = false,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA9377_HW_1_1_DEV_VERSION,
@@ -600,6 +613,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.uart_pin_workaround = true,
 		.credit_size_workaround = true,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA4019_HW_1_0_DEV_VERSION,
@@ -644,6 +658,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = false,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = WCN3990_HW_1_0_DEV_VERSION,
@@ -674,6 +689,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = false,
 		.dynamic_sar_support = true,
+		.hw_restart_disconnect = true,
 	},
 };
 
@@ -2442,6 +2458,7 @@ EXPORT_SYMBOL(ath10k_core_napi_sync_disable);
 static void ath10k_core_restart(struct work_struct *work)
 {
 	struct ath10k *ar = container_of(work, struct ath10k, restart_work);
+	struct ath10k_vif *arvif;
 	int ret;
 
 	set_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags);
@@ -2480,6 +2497,14 @@ static void ath10k_core_restart(struct work_struct *work)
 		ar->state = ATH10K_STATE_RESTARTING;
 		ath10k_halt(ar);
 		ath10k_scan_finish(ar);
+		if (ar->hw_params.hw_restart_disconnect) {
+			list_for_each_entry(arvif, &ar->arvifs, list) {
+				if (arvif->is_up &&
+				    arvif->vdev_type == WMI_VDEV_TYPE_STA)
+					ieee80211_hw_restart_disconnect(arvif->vif);
+			}
+		}
+
 		ieee80211_restart_hw(ar->hw);
 		break;
 	case ATH10K_STATE_OFF:
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 5215a6816d71..93acf0dd580a 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -633,6 +633,8 @@ struct ath10k_hw_params {
 	bool supports_peer_stats_info;
 
 	bool dynamic_sar_support;
+
+	bool hw_restart_disconnect;
 };
 
 struct htt_resp;
-- 
2.29.0

[PATCH v5 2/2] ath10k: Trigger sta disconnect on hardware restart

[Youghandhar Chintala]

Currently after the hardware restart triggered from the driver,
the station interface connection remains intact, since a disconnect
trigger is not sent to userspace. This can lead to a problem in
targets where the wifi mac sequence is added by the firmware.

After the target restart, its wifi mac sequence number gets
reset to zero. Hence AP to which our device is connected will receive
frames with a  wifi mac sequence number jump to the past, thereby
resulting in the AP dropping all these frames, until the frame
arrives with a wifi mac sequence number which AP was expecting.

To avoid such frame drops, its better to trigger a station disconnect
upon target hardware restart which can be done with API
ieee80211_reconfig_disconnect exposed to mac80211.

The other targets are not affected by this change, since the hardware
params flag is not set.

Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1
Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00048

Signed-off-by: Youghandhar Chintala <youghand@codeaurora.org>
---
 drivers/net/wireless/ath/ath10k/core.c | 25 +++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/hw.h   |  2 ++
 2 files changed, 27 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 9e1f483e1362..2092bfd02cd1 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -94,6 +94,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = true,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA988X_HW_2_0_VERSION,
@@ -131,6 +132,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = true,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA9887_HW_1_0_VERSION,
@@ -169,6 +171,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = false,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA6174_HW_3_2_VERSION,
@@ -202,6 +205,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.bmi_large_size_download = true,
 		.supports_peer_stats_info = true,
 		.dynamic_sar_support = true,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA6174_HW_2_1_VERSION,
@@ -239,6 +243,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = false,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA6174_HW_2_1_VERSION,
@@ -276,6 +281,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = false,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA6174_HW_3_0_VERSION,
@@ -313,6 +319,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = false,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA6174_HW_3_2_VERSION,
@@ -354,6 +361,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.tx_stats_over_pktlog = false,
 		.supports_peer_stats_info = true,
 		.dynamic_sar_support = true,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA99X0_HW_2_0_DEV_VERSION,
@@ -397,6 +405,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = false,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA9984_HW_1_0_DEV_VERSION,
@@ -447,6 +456,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = false,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA9888_HW_2_0_DEV_VERSION,
@@ -494,6 +504,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = false,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA9377_HW_1_0_DEV_VERSION,
@@ -531,6 +542,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = false,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA9377_HW_1_1_DEV_VERSION,
@@ -570,6 +582,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = false,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA9377_HW_1_1_DEV_VERSION,
@@ -600,6 +613,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.uart_pin_workaround = true,
 		.credit_size_workaround = true,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = QCA4019_HW_1_0_DEV_VERSION,
@@ -644,6 +658,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = false,
 		.dynamic_sar_support = false,
+		.hw_restart_disconnect = false,
 	},
 	{
 		.id = WCN3990_HW_1_0_DEV_VERSION,
@@ -674,6 +689,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.credit_size_workaround = false,
 		.tx_stats_over_pktlog = false,
 		.dynamic_sar_support = true,
+		.hw_restart_disconnect = true,
 	},
 };
 
@@ -2442,6 +2458,7 @@ EXPORT_SYMBOL(ath10k_core_napi_sync_disable);
 static void ath10k_core_restart(struct work_struct *work)
 {
 	struct ath10k *ar = container_of(work, struct ath10k, restart_work);
+	struct ath10k_vif *arvif;
 	int ret;
 
 	set_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags);
@@ -2480,6 +2497,14 @@ static void ath10k_core_restart(struct work_struct *work)
 		ar->state = ATH10K_STATE_RESTARTING;
 		ath10k_halt(ar);
 		ath10k_scan_finish(ar);
+		if (ar->hw_params.hw_restart_disconnect) {
+			list_for_each_entry(arvif, &ar->arvifs, list) {
+				if (arvif->is_up &&
+				    arvif->vdev_type == WMI_VDEV_TYPE_STA)
+					ieee80211_hw_restart_disconnect(arvif->vif);
+			}
+		}
+
 		ieee80211_restart_hw(ar->hw);
 		break;
 	case ATH10K_STATE_OFF:
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 5215a6816d71..93acf0dd580a 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -633,6 +633,8 @@ struct ath10k_hw_params {
 	bool supports_peer_stats_info;
 
 	bool dynamic_sar_support;
+
+	bool hw_restart_disconnect;
 };
 
 struct htt_resp;
-- 
2.29.0


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Re: [PATCH v5 0/2] mac80211: Trigger disconnect for STA during target hardware restart

[Brian Norris]

On Tue, Mar 08, 2022 at 05:23:23PM +0530, Youghandhar Chintala wrote:
> Currently in case of target hardware restart ,we just reconfig and
> re-enable the security keys and enable the network queues to start
> data traffic back from where it was interrupted.
> 
> Many ath10k wifi chipsets have sequence numbers for the data
> packets assigned by firmware and the mac sequence number will
> restart from zero after target hardware restart leading to mismatch
> in the sequence number expected by the remote peer vs the sequence
> number of the frame sent by the target firmware.
> 
> This mismatch in sequence number will cause out-of-order packets
> on the remote peer and all the frames sent by the device are dropped
> until we reach the sequence number which was sent before we restarted
> the target hardware
> 
> In order to fix this, we trigger a disconnect in case of hardware
> restart. After this there will be a fresh connection and thereby
> avoiding the dropping of frames by remote peer.
> 
> The right fix would be to pull the entire data path into the host
> which is not feasible or would need lots of complex/inefficient
> datapath changes.
> 
> ---
> Changes from v3:
> - Fixed commit text errors
> - Remove excess space in "hardware  restart"
> - Removed blank line between the function description and the arguments

For whatever it's worth, the series looks good to me:

Reviewed-by: Brian Norris <briannorris@chromium.org>

Re: [PATCH v5 0/2] mac80211: Trigger disconnect for STA during target hardware restart

[Brian Norris]

On Tue, Mar 08, 2022 at 05:23:23PM +0530, Youghandhar Chintala wrote:
> Currently in case of target hardware restart ,we just reconfig and
> re-enable the security keys and enable the network queues to start
> data traffic back from where it was interrupted.
> 
> Many ath10k wifi chipsets have sequence numbers for the data
> packets assigned by firmware and the mac sequence number will
> restart from zero after target hardware restart leading to mismatch
> in the sequence number expected by the remote peer vs the sequence
> number of the frame sent by the target firmware.
> 
> This mismatch in sequence number will cause out-of-order packets
> on the remote peer and all the frames sent by the device are dropped
> until we reach the sequence number which was sent before we restarted
> the target hardware
> 
> In order to fix this, we trigger a disconnect in case of hardware
> restart. After this there will be a fresh connection and thereby
> avoiding the dropping of frames by remote peer.
> 
> The right fix would be to pull the entire data path into the host
> which is not feasible or would need lots of complex/inefficient
> datapath changes.
> 
> ---
> Changes from v3:
> - Fixed commit text errors
> - Remove excess space in "hardware  restart"
> - Removed blank line between the function description and the arguments

For whatever it's worth, the series looks good to me:

Reviewed-by: Brian Norris <briannorris@chromium.org>

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k