From: Claudiu Beznea <claudiu.beznea@microchip.com> To: <nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>, <ludovic.desroches@microchip.com>, <linux@armlinux.org.uk> Cc: <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, Claudiu Beznea <claudiu.beznea@microchip.com> Subject: [PATCH] ARM: at91: Kconfig: implement PIT64B selection Date: Wed, 9 Mar 2022 12:08:02 +0200 [thread overview] Message-ID: <20220309100802.3610259-1-claudiu.beznea@microchip.com> (raw) Implement PIT64B selection thus it will be available for the necessary targets (at the moment SAM9X60 and SAMA7G5) w/o the necessity to specify it via defconfig. With this the current CONFIG_TIMER_OF dependency of PIT64B driver could be removed. Along with changes on AT91 Kconfig removed CONFIG_MICROCHIP_PIT64B from defconfigs. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> --- arch/arm/configs/at91_dt_defconfig | 1 - arch/arm/configs/multi_v7_defconfig | 1 - arch/arm/configs/sama7_defconfig | 1 - arch/arm/mach-at91/Kconfig | 9 +++++++++ 4 files changed, 9 insertions(+), 3 deletions(-) diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index 549d01be0b47..04f71dac9c97 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -195,7 +195,6 @@ CONFIG_RTC_DRV_AT91SAM9=y CONFIG_DMADEVICES=y CONFIG_AT_HDMAC=y CONFIG_AT_XDMAC=y -CONFIG_MICROCHIP_PIT64B=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_IIO=y CONFIG_AT91_ADC=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 8863fa969ede..bec62d5aa3c6 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -989,7 +989,6 @@ CONFIG_APQ_MMCC_8084=y CONFIG_MSM_GCC_8660=y CONFIG_MSM_MMCC_8960=y CONFIG_MSM_MMCC_8974=y -CONFIG_MICROCHIP_PIT64B=y CONFIG_BCM2835_MBOX=y CONFIG_ROCKCHIP_IOMMU=y CONFIG_TEGRA_IOMMU_GART=y diff --git a/arch/arm/configs/sama7_defconfig b/arch/arm/configs/sama7_defconfig index 07b0494ef743..2b0f020a18eb 100644 --- a/arch/arm/configs/sama7_defconfig +++ b/arch/arm/configs/sama7_defconfig @@ -182,7 +182,6 @@ CONFIG_RTC_DRV_AT91SAM9=y CONFIG_DMADEVICES=y CONFIG_AT_XDMAC=y CONFIG_STAGING=y -CONFIG_MICROCHIP_PIT64B=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_IIO=y CONFIG_IIO_SW_TRIGGER=y diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 279810381256..1531b4625c76 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -165,6 +165,15 @@ config ATMEL_CLOCKSOURCE_TCB to make a single 32-bit timer. It can also be used as a clock event device supporting oneshot mode. +config MICROCHIP_CLOCKSOURCE_PIT64B + bool "64-bit Periodic Interval Timer (PIT64B) support" + default SOC_SAM9X60 || SOC_SAMA7 + select MICROCHIP_PIT64B + help + Select this to get a high resolution clockevent (SAM9X60) or + clocksource and clockevent (SAMA7G5) based on Microchip 64-bit + Periodic Interval Timer. + config HAVE_AT91_UTMI bool -- 2.32.0
WARNING: multiple messages have this Message-ID (diff)
From: Claudiu Beznea <claudiu.beznea@microchip.com> To: <nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>, <ludovic.desroches@microchip.com>, <linux@armlinux.org.uk> Cc: <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, Claudiu Beznea <claudiu.beznea@microchip.com> Subject: [PATCH] ARM: at91: Kconfig: implement PIT64B selection Date: Wed, 9 Mar 2022 12:08:02 +0200 [thread overview] Message-ID: <20220309100802.3610259-1-claudiu.beznea@microchip.com> (raw) Implement PIT64B selection thus it will be available for the necessary targets (at the moment SAM9X60 and SAMA7G5) w/o the necessity to specify it via defconfig. With this the current CONFIG_TIMER_OF dependency of PIT64B driver could be removed. Along with changes on AT91 Kconfig removed CONFIG_MICROCHIP_PIT64B from defconfigs. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> --- arch/arm/configs/at91_dt_defconfig | 1 - arch/arm/configs/multi_v7_defconfig | 1 - arch/arm/configs/sama7_defconfig | 1 - arch/arm/mach-at91/Kconfig | 9 +++++++++ 4 files changed, 9 insertions(+), 3 deletions(-) diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index 549d01be0b47..04f71dac9c97 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -195,7 +195,6 @@ CONFIG_RTC_DRV_AT91SAM9=y CONFIG_DMADEVICES=y CONFIG_AT_HDMAC=y CONFIG_AT_XDMAC=y -CONFIG_MICROCHIP_PIT64B=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_IIO=y CONFIG_AT91_ADC=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 8863fa969ede..bec62d5aa3c6 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -989,7 +989,6 @@ CONFIG_APQ_MMCC_8084=y CONFIG_MSM_GCC_8660=y CONFIG_MSM_MMCC_8960=y CONFIG_MSM_MMCC_8974=y -CONFIG_MICROCHIP_PIT64B=y CONFIG_BCM2835_MBOX=y CONFIG_ROCKCHIP_IOMMU=y CONFIG_TEGRA_IOMMU_GART=y diff --git a/arch/arm/configs/sama7_defconfig b/arch/arm/configs/sama7_defconfig index 07b0494ef743..2b0f020a18eb 100644 --- a/arch/arm/configs/sama7_defconfig +++ b/arch/arm/configs/sama7_defconfig @@ -182,7 +182,6 @@ CONFIG_RTC_DRV_AT91SAM9=y CONFIG_DMADEVICES=y CONFIG_AT_XDMAC=y CONFIG_STAGING=y -CONFIG_MICROCHIP_PIT64B=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_IIO=y CONFIG_IIO_SW_TRIGGER=y diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 279810381256..1531b4625c76 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -165,6 +165,15 @@ config ATMEL_CLOCKSOURCE_TCB to make a single 32-bit timer. It can also be used as a clock event device supporting oneshot mode. +config MICROCHIP_CLOCKSOURCE_PIT64B + bool "64-bit Periodic Interval Timer (PIT64B) support" + default SOC_SAM9X60 || SOC_SAMA7 + select MICROCHIP_PIT64B + help + Select this to get a high resolution clockevent (SAM9X60) or + clocksource and clockevent (SAMA7G5) based on Microchip 64-bit + Periodic Interval Timer. + config HAVE_AT91_UTMI bool -- 2.32.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-03-09 10:07 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-03-09 10:08 Claudiu Beznea [this message] 2022-03-09 10:08 ` [PATCH] ARM: at91: Kconfig: implement PIT64B selection Claudiu Beznea 2022-05-05 15:16 ` Nicolas Ferre 2022-05-05 15:16 ` Nicolas Ferre
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220309100802.3610259-1-claudiu.beznea@microchip.com \ --to=claudiu.beznea@microchip.com \ --cc=alexandre.belloni@bootlin.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux@armlinux.org.uk \ --cc=ludovic.desroches@microchip.com \ --cc=nicolas.ferre@microchip.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.