[can-next-rfc 12/12] can: mcp251xfd: ring: increase number of RX-FIFOs to 3 and increase max TX-FIFO depth to 16

[Marc Kleine-Budde <mkl@pengutronix.de>]

This patch increases the number of RX-FIFOs to 3 and the max TX-FIFO
depth to 16. This leads to the following default ring configuration.

CAN-2.0 mode:

| FIFO setup: TEF:         0x400:  8*12 bytes =   96 bytes
| FIFO setup: RX-0: FIFO 1/0x460: 32*20 bytes =  640 bytes
| FIFO setup: RX-1: FIFO 2/0x6e0: 32*20 bytes =  640 bytes
| FIFO setup: RX-2: FIFO 3/0x960: 16*20 bytes =  320 bytes
| FIFO setup: TX:   FIFO 4/0xaa0:  8*16 bytes =  128 bytes
| FIFO setup: free:                              224 bytes

CAN-FD mode:

| FIFO setup: TEF:         0x400:  4*12 bytes =   48 bytes
| FIFO setup: RX-0: FIFO 1/0x430: 16*76 bytes = 1216 bytes
| FIFO setup: RX-1: FIFO 2/0x8f0:  4*76 bytes =  304 bytes
| FIFO setup: TX:   FIFO 3/0xa20:  4*72 bytes =  288 bytes
| FIFO setup: free:                              192 bytes

With the previously added ethtool ring configuration support the RAM
on the chip can now be runtime configured between RX and TX buffers.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/spi/mcp251xfd/mcp251xfd.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd.h b/drivers/net/can/spi/mcp251xfd/mcp251xfd.h
index c6cb8c3391b3..9cb6b5ad8dda 100644
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd.h
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd.h
@@ -398,7 +398,7 @@ static_assert(MCP251XFD_TIMESTAMP_WORK_DELAY_SEC <
 
 /* FIFO and Ring */
 #define MCP251XFD_FIFO_TEF_NUM 1U
-#define MCP251XFD_FIFO_RX_NUM 1U
+#define MCP251XFD_FIFO_RX_NUM 3U
 #define MCP251XFD_FIFO_TX_NUM 1U
 
 #define MCP251XFD_FIFO_DEPTH 32U
@@ -409,7 +409,7 @@ static_assert(MCP251XFD_TIMESTAMP_WORK_DELAY_SEC <
 #define MCP251XFD_RX_FIFO_DEPTH_COALESCE_MIN 8U
 
 #define MCP251XFD_TX_OBJ_NUM_MIN 2U
-#define MCP251XFD_TX_OBJ_NUM_MAX 8U
+#define MCP251XFD_TX_OBJ_NUM_MAX 16U
 #define MCP251XFD_TX_OBJ_NUM_CAN_DEFAULT 8U
 #define MCP251XFD_TX_OBJ_NUM_CANFD_DEFAULT 4U
 #define MCP251XFD_TX_FIFO_DEPTH_MIN 2U
-- 
2.35.1