* [PATCH v7 01/12] hw/nvme: Add support for SR-IOV
2022-03-18 19:18 [PATCH v7 00/12] hw/nvme: SR-IOV with Virtualization Enhancements Lukasz Maniak
@ 2022-03-18 19:18 ` Lukasz Maniak
2022-03-18 19:18 ` [PATCH v7 02/12] hw/nvme: Add support for Primary Controller Capabilities Lukasz Maniak
` (12 subsequent siblings)
13 siblings, 0 replies; 21+ messages in thread
From: Lukasz Maniak @ 2022-03-18 19:18 UTC (permalink / raw)
To: qemu-devel
Cc: fam, kwolf, lukasz.maniak, stefanha, qemu-block, mst, k.jensen,
armbru, f4bug, kbusch, its, hreitz, xypron.glpk, lukasz.gieryk,
ani, imammedo
This patch implements initial support for Single Root I/O Virtualization
on an NVMe device.
Essentially, it allows to define the maximum number of virtual functions
supported by the NVMe controller via sriov_max_vfs parameter.
Passing a non-zero value to sriov_max_vfs triggers reporting of SR-IOV
capability by a physical controller and ARI capability by both the
physical and virtual function devices.
NVMe controllers created via virtual functions mirror functionally
the physical controller, which may not entirely be the case, thus
consideration would be needed on the way to limit the capabilities of
the VF.
NVMe subsystem is required for the use of SR-IOV.
Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
---
hw/nvme/ctrl.c | 85 ++++++++++++++++++++++++++++++++++++++--
hw/nvme/nvme.h | 3 +-
include/hw/pci/pci_ids.h | 1 +
3 files changed, 85 insertions(+), 4 deletions(-)
diff --git a/hw/nvme/ctrl.c b/hw/nvme/ctrl.c
index 03760ddeae8..0e1d8d03c87 100644
--- a/hw/nvme/ctrl.c
+++ b/hw/nvme/ctrl.c
@@ -35,6 +35,7 @@
* mdts=<N[optional]>,vsl=<N[optional]>, \
* zoned.zasl=<N[optional]>, \
* zoned.auto_transition=<on|off[optional]>, \
+ * sriov_max_vfs=<N[optional]> \
* subsys=<subsys_id>
* -device nvme-ns,drive=<drive_id>,bus=<bus_name>,nsid=<nsid>,\
* zoned=<true|false[optional]>, \
@@ -106,6 +107,12 @@
* transitioned to zone state closed for resource management purposes.
* Defaults to 'on'.
*
+ * - `sriov_max_vfs`
+ * Indicates the maximum number of PCIe virtual functions supported
+ * by the controller. The default value is 0. Specifying a non-zero value
+ * enables reporting of both SR-IOV and ARI capabilities by the NVMe device.
+ * Virtual function controllers will not report SR-IOV capability.
+ *
* nvme namespace device parameters
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* - `shared`
@@ -160,6 +167,7 @@
#include "sysemu/block-backend.h"
#include "sysemu/hostmem.h"
#include "hw/pci/msix.h"
+#include "hw/pci/pcie_sriov.h"
#include "migration/vmstate.h"
#include "nvme.h"
@@ -176,6 +184,9 @@
#define NVME_TEMPERATURE_CRITICAL 0x175
#define NVME_NUM_FW_SLOTS 1
#define NVME_DEFAULT_MAX_ZA_SIZE (128 * KiB)
+#define NVME_MAX_VFS 127
+#define NVME_VF_OFFSET 0x1
+#define NVME_VF_STRIDE 1
#define NVME_GUEST_ERR(trace, fmt, ...) \
do { \
@@ -5886,6 +5897,10 @@ static void nvme_ctrl_reset(NvmeCtrl *n)
g_free(event);
}
+ if (!pci_is_vf(&n->parent_obj) && n->params.sriov_max_vfs) {
+ pcie_sriov_pf_disable_vfs(&n->parent_obj);
+ }
+
n->aer_queued = 0;
n->outstanding_aers = 0;
n->qs_created = false;
@@ -6567,6 +6582,29 @@ static void nvme_check_constraints(NvmeCtrl *n, Error **errp)
error_setg(errp, "vsl must be non-zero");
return;
}
+
+ if (params->sriov_max_vfs) {
+ if (!n->subsys) {
+ error_setg(errp, "subsystem is required for the use of SR-IOV");
+ return;
+ }
+
+ if (params->sriov_max_vfs > NVME_MAX_VFS) {
+ error_setg(errp, "sriov_max_vfs must be between 0 and %d",
+ NVME_MAX_VFS);
+ return;
+ }
+
+ if (params->cmb_size_mb) {
+ error_setg(errp, "CMB is not supported with SR-IOV");
+ return;
+ }
+
+ if (n->pmr.dev) {
+ error_setg(errp, "PMR is not supported with SR-IOV");
+ return;
+ }
+ }
}
static void nvme_init_state(NvmeCtrl *n)
@@ -6624,6 +6662,20 @@ static void nvme_init_pmr(NvmeCtrl *n, PCIDevice *pci_dev)
memory_region_set_enabled(&n->pmr.dev->mr, false);
}
+static void nvme_init_sriov(NvmeCtrl *n, PCIDevice *pci_dev, uint16_t offset,
+ uint64_t bar_size)
+{
+ uint16_t vf_dev_id = n->params.use_intel_id ?
+ PCI_DEVICE_ID_INTEL_NVME : PCI_DEVICE_ID_REDHAT_NVME;
+
+ pcie_sriov_pf_init(pci_dev, offset, "nvme", vf_dev_id,
+ n->params.sriov_max_vfs, n->params.sriov_max_vfs,
+ NVME_VF_OFFSET, NVME_VF_STRIDE);
+
+ pcie_sriov_pf_init_vf_bar(pci_dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY |
+ PCI_BASE_ADDRESS_MEM_TYPE_64, bar_size);
+}
+
static int nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev, Error **errp)
{
uint8_t *pci_conf = pci_dev->config;
@@ -6638,7 +6690,7 @@ static int nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev, Error **errp)
if (n->params.use_intel_id) {
pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_INTEL);
- pci_config_set_device_id(pci_conf, 0x5845);
+ pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_NVME);
} else {
pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_REDHAT);
pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_REDHAT_NVME);
@@ -6646,6 +6698,9 @@ static int nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev, Error **errp)
pci_config_set_class(pci_conf, PCI_CLASS_STORAGE_EXPRESS);
pcie_endpoint_cap_init(pci_dev, 0x80);
+ if (n->params.sriov_max_vfs) {
+ pcie_ari_init(pci_dev, 0x100, 1);
+ }
bar_size = QEMU_ALIGN_UP(n->reg_size, 4 * KiB);
msix_table_offset = bar_size;
@@ -6664,8 +6719,12 @@ static int nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev, Error **errp)
n->reg_size);
memory_region_add_subregion(&n->bar0, 0, &n->iomem);
- pci_register_bar(pci_dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY |
- PCI_BASE_ADDRESS_MEM_TYPE_64, &n->bar0);
+ if (pci_is_vf(pci_dev)) {
+ pcie_sriov_vf_register_bar(pci_dev, 0, &n->bar0);
+ } else {
+ pci_register_bar(pci_dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY |
+ PCI_BASE_ADDRESS_MEM_TYPE_64, &n->bar0);
+ }
ret = msix_init(pci_dev, n->params.msix_qsize,
&n->bar0, 0, msix_table_offset,
&n->bar0, 0, msix_pba_offset, 0, &err);
@@ -6686,6 +6745,10 @@ static int nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev, Error **errp)
nvme_init_pmr(n, pci_dev);
}
+ if (!pci_is_vf(pci_dev) && n->params.sriov_max_vfs) {
+ nvme_init_sriov(n, pci_dev, 0x120, bar_size);
+ }
+
return 0;
}
@@ -6836,6 +6899,16 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
NvmeCtrl *n = NVME(pci_dev);
NvmeNamespace *ns;
Error *local_err = NULL;
+ NvmeCtrl *pn = NVME(pcie_sriov_get_pf(pci_dev));
+
+ if (pci_is_vf(pci_dev)) {
+ /*
+ * VFs derive settings from the parent. PF's lifespan exceeds
+ * that of VF's, so it's safe to share params.serial.
+ */
+ memcpy(&n->params, &pn->params, sizeof(NvmeParams));
+ n->subsys = pn->subsys;
+ }
nvme_check_constraints(n, &local_err);
if (local_err) {
@@ -6900,6 +6973,11 @@ static void nvme_exit(PCIDevice *pci_dev)
if (n->pmr.dev) {
host_memory_backend_set_mapped(n->pmr.dev, false);
}
+
+ if (!pci_is_vf(pci_dev) && n->params.sriov_max_vfs) {
+ pcie_sriov_pf_exit(pci_dev);
+ }
+
msix_uninit(pci_dev, &n->bar0, &n->bar0);
memory_region_del_subregion(&n->bar0, &n->iomem);
}
@@ -6924,6 +7002,7 @@ static Property nvme_props[] = {
DEFINE_PROP_UINT8("zoned.zasl", NvmeCtrl, params.zasl, 0),
DEFINE_PROP_BOOL("zoned.auto_transition", NvmeCtrl,
params.auto_transition_zones, true),
+ DEFINE_PROP_UINT8("sriov_max_vfs", NvmeCtrl, params.sriov_max_vfs, 0),
DEFINE_PROP_END_OF_LIST(),
};
diff --git a/hw/nvme/nvme.h b/hw/nvme/nvme.h
index 739c8b8f796..89ca6e96401 100644
--- a/hw/nvme/nvme.h
+++ b/hw/nvme/nvme.h
@@ -24,7 +24,7 @@
#include "block/nvme.h"
-#define NVME_MAX_CONTROLLERS 32
+#define NVME_MAX_CONTROLLERS 256
#define NVME_MAX_NAMESPACES 256
#define NVME_EUI64_DEFAULT ((uint64_t)0x5254000000000000)
@@ -405,6 +405,7 @@ typedef struct NvmeParams {
uint8_t zasl;
bool auto_transition_zones;
bool legacy_cmb;
+ uint8_t sriov_max_vfs;
} NvmeParams;
typedef struct NvmeCtrl {
diff --git a/include/hw/pci/pci_ids.h b/include/hw/pci/pci_ids.h
index 11abe22d460..992426768e6 100644
--- a/include/hw/pci/pci_ids.h
+++ b/include/hw/pci/pci_ids.h
@@ -237,6 +237,7 @@
#define PCI_DEVICE_ID_INTEL_82801BA_11 0x244e
#define PCI_DEVICE_ID_INTEL_82801D 0x24CD
#define PCI_DEVICE_ID_INTEL_ESB_9 0x25ab
+#define PCI_DEVICE_ID_INTEL_NVME 0x5845
#define PCI_DEVICE_ID_INTEL_82371SB_0 0x7000
#define PCI_DEVICE_ID_INTEL_82371SB_1 0x7010
#define PCI_DEVICE_ID_INTEL_82371SB_2 0x7020
--
2.25.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v7 02/12] hw/nvme: Add support for Primary Controller Capabilities
2022-03-18 19:18 [PATCH v7 00/12] hw/nvme: SR-IOV with Virtualization Enhancements Lukasz Maniak
2022-03-18 19:18 ` [PATCH v7 01/12] hw/nvme: Add support for SR-IOV Lukasz Maniak
@ 2022-03-18 19:18 ` Lukasz Maniak
2022-03-18 19:18 ` [PATCH v7 03/12] hw/nvme: Add support for Secondary Controller List Lukasz Maniak
` (11 subsequent siblings)
13 siblings, 0 replies; 21+ messages in thread
From: Lukasz Maniak @ 2022-03-18 19:18 UTC (permalink / raw)
To: qemu-devel
Cc: fam, kwolf, lukasz.maniak, stefanha, qemu-block, mst, k.jensen,
armbru, f4bug, kbusch, its, hreitz, xypron.glpk, lukasz.gieryk,
ani, imammedo
Implementation of Primary Controller Capabilities data
structure (Identify command with CNS value of 14h).
Currently, the command returns only ID of a primary controller.
Handling of remaining fields are added in subsequent patches
implementing virtualization enhancements.
Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
---
hw/nvme/ctrl.c | 23 ++++++++++++++++++-----
hw/nvme/nvme.h | 2 ++
hw/nvme/trace-events | 1 +
include/block/nvme.h | 23 +++++++++++++++++++++++
4 files changed, 44 insertions(+), 5 deletions(-)
diff --git a/hw/nvme/ctrl.c b/hw/nvme/ctrl.c
index 0e1d8d03c87..ea9d5af3545 100644
--- a/hw/nvme/ctrl.c
+++ b/hw/nvme/ctrl.c
@@ -4799,6 +4799,14 @@ static uint16_t nvme_identify_ctrl_list(NvmeCtrl *n, NvmeRequest *req,
return nvme_c2h(n, (uint8_t *)list, sizeof(list), req);
}
+static uint16_t nvme_identify_pri_ctrl_cap(NvmeCtrl *n, NvmeRequest *req)
+{
+ trace_pci_nvme_identify_pri_ctrl_cap(le16_to_cpu(n->pri_ctrl_cap.cntlid));
+
+ return nvme_c2h(n, (uint8_t *)&n->pri_ctrl_cap,
+ sizeof(NvmePriCtrlCap), req);
+}
+
static uint16_t nvme_identify_ns_csi(NvmeCtrl *n, NvmeRequest *req,
bool active)
{
@@ -5018,6 +5026,8 @@ static uint16_t nvme_identify(NvmeCtrl *n, NvmeRequest *req)
return nvme_identify_ctrl_list(n, req, true);
case NVME_ID_CNS_CTRL_LIST:
return nvme_identify_ctrl_list(n, req, false);
+ case NVME_ID_CNS_PRIMARY_CTRL_CAP:
+ return nvme_identify_pri_ctrl_cap(n, req);
case NVME_ID_CNS_CS_NS:
return nvme_identify_ns_csi(n, req, true);
case NVME_ID_CNS_CS_NS_PRESENT:
@@ -6609,6 +6619,8 @@ static void nvme_check_constraints(NvmeCtrl *n, Error **errp)
static void nvme_init_state(NvmeCtrl *n)
{
+ NvmePriCtrlCap *cap = &n->pri_ctrl_cap;
+
/* add one to max_ioqpairs to account for the admin queue pair */
n->reg_size = pow2ceil(sizeof(NvmeBar) +
2 * (n->params.max_ioqpairs + 1) * NVME_DB_SIZE);
@@ -6618,6 +6630,8 @@ static void nvme_init_state(NvmeCtrl *n)
n->features.temp_thresh_hi = NVME_TEMPERATURE_WARNING;
n->starttime_ms = qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL);
n->aer_reqs = g_new0(NvmeRequest *, n->params.aerl + 1);
+
+ cap->cntlid = cpu_to_le16(n->cntlid);
}
static void nvme_init_cmb(NvmeCtrl *n, PCIDevice *pci_dev)
@@ -6919,15 +6933,14 @@ static void nvme_realize(PCIDevice *pci_dev, Error **errp)
qbus_init(&n->bus, sizeof(NvmeBus), TYPE_NVME_BUS,
&pci_dev->qdev, n->parent_obj.qdev.id);
- nvme_init_state(n);
- if (nvme_init_pci(n, pci_dev, errp)) {
- return;
- }
-
if (nvme_init_subsys(n, errp)) {
error_propagate(errp, local_err);
return;
}
+ nvme_init_state(n);
+ if (nvme_init_pci(n, pci_dev, errp)) {
+ return;
+ }
nvme_init_ctrl(n, pci_dev);
/* setup a namespace if the controller drive property was given */
diff --git a/hw/nvme/nvme.h b/hw/nvme/nvme.h
index 89ca6e96401..e58bab841e2 100644
--- a/hw/nvme/nvme.h
+++ b/hw/nvme/nvme.h
@@ -477,6 +477,8 @@ typedef struct NvmeCtrl {
uint32_t async_config;
NvmeHostBehaviorSupport hbs;
} features;
+
+ NvmePriCtrlCap pri_ctrl_cap;
} NvmeCtrl;
static inline NvmeNamespace *nvme_ns(NvmeCtrl *n, uint32_t nsid)
diff --git a/hw/nvme/trace-events b/hw/nvme/trace-events
index ff1b4589692..1834b17cf21 100644
--- a/hw/nvme/trace-events
+++ b/hw/nvme/trace-events
@@ -56,6 +56,7 @@ pci_nvme_identify_ctrl(void) "identify controller"
pci_nvme_identify_ctrl_csi(uint8_t csi) "identify controller, csi=0x%"PRIx8""
pci_nvme_identify_ns(uint32_t ns) "nsid %"PRIu32""
pci_nvme_identify_ctrl_list(uint8_t cns, uint16_t cntid) "cns 0x%"PRIx8" cntid %"PRIu16""
+pci_nvme_identify_pri_ctrl_cap(uint16_t cntlid) "identify primary controller capabilities cntlid=%"PRIu16""
pci_nvme_identify_ns_csi(uint32_t ns, uint8_t csi) "nsid=%"PRIu32", csi=0x%"PRIx8""
pci_nvme_identify_nslist(uint32_t ns) "nsid %"PRIu32""
pci_nvme_identify_nslist_csi(uint16_t ns, uint8_t csi) "nsid=%"PRIu16", csi=0x%"PRIx8""
diff --git a/include/block/nvme.h b/include/block/nvme.h
index 3737351cc81..524a04fb94e 100644
--- a/include/block/nvme.h
+++ b/include/block/nvme.h
@@ -1033,6 +1033,7 @@ enum NvmeIdCns {
NVME_ID_CNS_NS_PRESENT = 0x11,
NVME_ID_CNS_NS_ATTACHED_CTRL_LIST = 0x12,
NVME_ID_CNS_CTRL_LIST = 0x13,
+ NVME_ID_CNS_PRIMARY_CTRL_CAP = 0x14,
NVME_ID_CNS_CS_NS_PRESENT_LIST = 0x1a,
NVME_ID_CNS_CS_NS_PRESENT = 0x1b,
NVME_ID_CNS_IO_COMMAND_SET = 0x1c,
@@ -1553,6 +1554,27 @@ typedef enum NvmeZoneState {
NVME_ZONE_STATE_OFFLINE = 0x0f,
} NvmeZoneState;
+typedef struct QEMU_PACKED NvmePriCtrlCap {
+ uint16_t cntlid;
+ uint16_t portid;
+ uint8_t crt;
+ uint8_t rsvd5[27];
+ uint32_t vqfrt;
+ uint32_t vqrfa;
+ uint16_t vqrfap;
+ uint16_t vqprt;
+ uint16_t vqfrsm;
+ uint16_t vqgran;
+ uint8_t rsvd48[16];
+ uint32_t vifrt;
+ uint32_t virfa;
+ uint16_t virfap;
+ uint16_t viprt;
+ uint16_t vifrsm;
+ uint16_t vigran;
+ uint8_t rsvd80[4016];
+} NvmePriCtrlCap;
+
static inline void _nvme_check_size(void)
{
QEMU_BUILD_BUG_ON(sizeof(NvmeBar) != 4096);
@@ -1588,5 +1610,6 @@ static inline void _nvme_check_size(void)
QEMU_BUILD_BUG_ON(sizeof(NvmeIdNsDescr) != 4);
QEMU_BUILD_BUG_ON(sizeof(NvmeZoneDescr) != 64);
QEMU_BUILD_BUG_ON(sizeof(NvmeDifTuple) != 16);
+ QEMU_BUILD_BUG_ON(sizeof(NvmePriCtrlCap) != 4096);
}
#endif
--
2.25.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v7 03/12] hw/nvme: Add support for Secondary Controller List
2022-03-18 19:18 [PATCH v7 00/12] hw/nvme: SR-IOV with Virtualization Enhancements Lukasz Maniak
2022-03-18 19:18 ` [PATCH v7 01/12] hw/nvme: Add support for SR-IOV Lukasz Maniak
2022-03-18 19:18 ` [PATCH v7 02/12] hw/nvme: Add support for Primary Controller Capabilities Lukasz Maniak
@ 2022-03-18 19:18 ` Lukasz Maniak
2022-03-18 19:18 ` [PATCH v7 04/12] hw/nvme: Implement the Function Level Reset Lukasz Maniak
` (10 subsequent siblings)
13 siblings, 0 replies; 21+ messages in thread
From: Lukasz Maniak @ 2022-03-18 19:18 UTC (permalink / raw)
To: qemu-devel
Cc: fam, kwolf, lukasz.maniak, stefanha, qemu-block, mst, k.jensen,
armbru, f4bug, kbusch, its, hreitz, xypron.glpk, lukasz.gieryk,
ani, imammedo
Introduce handling for Secondary Controller List (Identify command with
CNS value of 15h).
Secondary controller ids are unique in the subsystem, hence they are
reserved by it upon initialization of the primary controller to the
number of sriov_max_vfs.
ID reservation requires the addition of an intermediate controller slot
state, so the reserved controller has the address 0xFFFF.
A secondary controller is in the reserved state when it has no virtual
function assigned, but its primary controller is realized.
Secondary controller reservations are released to NULL when its primary
controller is unregistered.
Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
---
hw/nvme/ctrl.c | 35 +++++++++++++++++++++
hw/nvme/ns.c | 2 +-
hw/nvme/nvme.h | 18 +++++++++++
hw/nvme/subsys.c | 75 ++++++++++++++++++++++++++++++++++++++------
hw/nvme/trace-events | 1 +
include/block/nvme.h | 20 ++++++++++++
6 files changed, 141 insertions(+), 10 deletions(-)
diff --git a/hw/nvme/ctrl.c b/hw/nvme/ctrl.c
index ea9d5af3545..b1b1bebbaf2 100644
--- a/hw/nvme/ctrl.c
+++ b/hw/nvme/ctrl.c
@@ -4807,6 +4807,29 @@ static uint16_t nvme_identify_pri_ctrl_cap(NvmeCtrl *n, NvmeRequest *req)
sizeof(NvmePriCtrlCap), req);
}
+static uint16_t nvme_identify_sec_ctrl_list(NvmeCtrl *n, NvmeRequest *req)
+{
+ NvmeIdentify *c = (NvmeIdentify *)&req->cmd;
+ uint16_t pri_ctrl_id = le16_to_cpu(n->pri_ctrl_cap.cntlid);
+ uint16_t min_id = le16_to_cpu(c->ctrlid);
+ uint8_t num_sec_ctrl = n->sec_ctrl_list.numcntl;
+ NvmeSecCtrlList list = {0};
+ uint8_t i;
+
+ for (i = 0; i < num_sec_ctrl; i++) {
+ if (n->sec_ctrl_list.sec[i].scid >= min_id) {
+ list.numcntl = num_sec_ctrl - i;
+ memcpy(&list.sec, n->sec_ctrl_list.sec + i,
+ list.numcntl * sizeof(NvmeSecCtrlEntry));
+ break;
+ }
+ }
+
+ trace_pci_nvme_identify_sec_ctrl_list(pri_ctrl_id, list.numcntl);
+
+ return nvme_c2h(n, (uint8_t *)&list, sizeof(list), req);
+}
+
static uint16_t nvme_identify_ns_csi(NvmeCtrl *n, NvmeRequest *req,
bool active)
{
@@ -5028,6 +5051,8 @@ static uint16_t nvme_identify(NvmeCtrl *n, NvmeRequest *req)
return nvme_identify_ctrl_list(n, req, false);
case NVME_ID_CNS_PRIMARY_CTRL_CAP:
return nvme_identify_pri_ctrl_cap(n, req);
+ case NVME_ID_CNS_SECONDARY_CTRL_LIST:
+ return nvme_identify_sec_ctrl_list(n, req);
case NVME_ID_CNS_CS_NS:
return nvme_identify_ns_csi(n, req, true);
case NVME_ID_CNS_CS_NS_PRESENT:
@@ -6620,6 +6645,9 @@ static void nvme_check_constraints(NvmeCtrl *n, Error **errp)
static void nvme_init_state(NvmeCtrl *n)
{
NvmePriCtrlCap *cap = &n->pri_ctrl_cap;
+ NvmeSecCtrlList *list = &n->sec_ctrl_list;
+ NvmeSecCtrlEntry *sctrl;
+ int i;
/* add one to max_ioqpairs to account for the admin queue pair */
n->reg_size = pow2ceil(sizeof(NvmeBar) +
@@ -6631,6 +6659,13 @@ static void nvme_init_state(NvmeCtrl *n)
n->starttime_ms = qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL);
n->aer_reqs = g_new0(NvmeRequest *, n->params.aerl + 1);
+ list->numcntl = cpu_to_le16(n->params.sriov_max_vfs);
+ for (i = 0; i < n->params.sriov_max_vfs; i++) {
+ sctrl = &list->sec[i];
+ sctrl->pcid = cpu_to_le16(n->cntlid);
+ sctrl->vfn = cpu_to_le16(i + 1);
+ }
+
cap->cntlid = cpu_to_le16(n->cntlid);
}
diff --git a/hw/nvme/ns.c b/hw/nvme/ns.c
index 8a3613d9ab0..cfd232bb147 100644
--- a/hw/nvme/ns.c
+++ b/hw/nvme/ns.c
@@ -596,7 +596,7 @@ static void nvme_ns_realize(DeviceState *dev, Error **errp)
for (i = 0; i < ARRAY_SIZE(subsys->ctrls); i++) {
NvmeCtrl *ctrl = subsys->ctrls[i];
- if (ctrl) {
+ if (ctrl && ctrl != SUBSYS_SLOT_RSVD) {
nvme_attach_ns(ctrl, ns);
}
}
diff --git a/hw/nvme/nvme.h b/hw/nvme/nvme.h
index e58bab841e2..7581ef26fdb 100644
--- a/hw/nvme/nvme.h
+++ b/hw/nvme/nvme.h
@@ -43,6 +43,7 @@ typedef struct NvmeBus {
#define TYPE_NVME_SUBSYS "nvme-subsys"
#define NVME_SUBSYS(obj) \
OBJECT_CHECK(NvmeSubsystem, (obj), TYPE_NVME_SUBSYS)
+#define SUBSYS_SLOT_RSVD (void *)0xFFFF
typedef struct NvmeSubsystem {
DeviceState parent_obj;
@@ -67,6 +68,10 @@ static inline NvmeCtrl *nvme_subsys_ctrl(NvmeSubsystem *subsys,
return NULL;
}
+ if (subsys->ctrls[cntlid] == SUBSYS_SLOT_RSVD) {
+ return NULL;
+ }
+
return subsys->ctrls[cntlid];
}
@@ -479,6 +484,7 @@ typedef struct NvmeCtrl {
} features;
NvmePriCtrlCap pri_ctrl_cap;
+ NvmeSecCtrlList sec_ctrl_list;
} NvmeCtrl;
static inline NvmeNamespace *nvme_ns(NvmeCtrl *n, uint32_t nsid)
@@ -513,6 +519,18 @@ static inline uint16_t nvme_cid(NvmeRequest *req)
return le16_to_cpu(req->cqe.cid);
}
+static inline NvmeSecCtrlEntry *nvme_sctrl(NvmeCtrl *n)
+{
+ PCIDevice *pci_dev = &n->parent_obj;
+ NvmeCtrl *pf = NVME(pcie_sriov_get_pf(pci_dev));
+
+ if (pci_is_vf(pci_dev)) {
+ return &pf->sec_ctrl_list.sec[pcie_sriov_vf_number(pci_dev)];
+ }
+
+ return NULL;
+}
+
void nvme_attach_ns(NvmeCtrl *n, NvmeNamespace *ns);
uint16_t nvme_bounce_data(NvmeCtrl *n, void *ptr, uint32_t len,
NvmeTxDirection dir, NvmeRequest *req);
diff --git a/hw/nvme/subsys.c b/hw/nvme/subsys.c
index fb58d639504..f445ca86c25 100644
--- a/hw/nvme/subsys.c
+++ b/hw/nvme/subsys.c
@@ -11,20 +11,71 @@
#include "nvme.h"
-int nvme_subsys_register_ctrl(NvmeCtrl *n, Error **errp)
+static int nvme_subsys_reserve_cntlids(NvmeCtrl *n, int start, int num)
{
NvmeSubsystem *subsys = n->subsys;
- int cntlid, nsid;
+ NvmeSecCtrlList *list = &n->sec_ctrl_list;
+ NvmeSecCtrlEntry *sctrl;
+ int i, cnt = 0;
+
+ for (i = start; i < ARRAY_SIZE(subsys->ctrls) && cnt < num; i++) {
+ if (!subsys->ctrls[i]) {
+ sctrl = &list->sec[cnt];
+ sctrl->scid = cpu_to_le16(i);
+ subsys->ctrls[i] = SUBSYS_SLOT_RSVD;
+ cnt++;
+ }
+ }
+
+ return cnt;
+}
- for (cntlid = 0; cntlid < ARRAY_SIZE(subsys->ctrls); cntlid++) {
- if (!subsys->ctrls[cntlid]) {
- break;
+static void nvme_subsys_unreserve_cntlids(NvmeCtrl *n)
+{
+ NvmeSubsystem *subsys = n->subsys;
+ NvmeSecCtrlList *list = &n->sec_ctrl_list;
+ NvmeSecCtrlEntry *sctrl;
+ int i, cntlid;
+
+ for (i = 0; i < n->params.sriov_max_vfs; i++) {
+ sctrl = &list->sec[i];
+ cntlid = le16_to_cpu(sctrl->scid);
+
+ if (cntlid) {
+ assert(subsys->ctrls[cntlid] == SUBSYS_SLOT_RSVD);
+ subsys->ctrls[cntlid] = NULL;
+ sctrl->scid = 0;
}
}
+}
+
+int nvme_subsys_register_ctrl(NvmeCtrl *n, Error **errp)
+{
+ NvmeSubsystem *subsys = n->subsys;
+ NvmeSecCtrlEntry *sctrl = nvme_sctrl(n);
+ int cntlid, nsid, num_rsvd, num_vfs = n->params.sriov_max_vfs;
+
+ if (pci_is_vf(&n->parent_obj)) {
+ cntlid = le16_to_cpu(sctrl->scid);
+ } else {
+ for (cntlid = 0; cntlid < ARRAY_SIZE(subsys->ctrls); cntlid++) {
+ if (!subsys->ctrls[cntlid]) {
+ break;
+ }
+ }
- if (cntlid == ARRAY_SIZE(subsys->ctrls)) {
- error_setg(errp, "no more free controller id");
- return -1;
+ if (cntlid == ARRAY_SIZE(subsys->ctrls)) {
+ error_setg(errp, "no more free controller id");
+ return -1;
+ }
+
+ num_rsvd = nvme_subsys_reserve_cntlids(n, cntlid + 1, num_vfs);
+ if (num_rsvd != num_vfs) {
+ nvme_subsys_unreserve_cntlids(n);
+ error_setg(errp,
+ "no more free controller ids for secondary controllers");
+ return -1;
+ }
}
subsys->ctrls[cntlid] = n;
@@ -41,7 +92,13 @@ int nvme_subsys_register_ctrl(NvmeCtrl *n, Error **errp)
void nvme_subsys_unregister_ctrl(NvmeSubsystem *subsys, NvmeCtrl *n)
{
- subsys->ctrls[n->cntlid] = NULL;
+ if (pci_is_vf(&n->parent_obj)) {
+ subsys->ctrls[n->cntlid] = SUBSYS_SLOT_RSVD;
+ } else {
+ subsys->ctrls[n->cntlid] = NULL;
+ nvme_subsys_unreserve_cntlids(n);
+ }
+
n->cntlid = -1;
}
diff --git a/hw/nvme/trace-events b/hw/nvme/trace-events
index 1834b17cf21..889bbb3101e 100644
--- a/hw/nvme/trace-events
+++ b/hw/nvme/trace-events
@@ -57,6 +57,7 @@ pci_nvme_identify_ctrl_csi(uint8_t csi) "identify controller, csi=0x%"PRIx8""
pci_nvme_identify_ns(uint32_t ns) "nsid %"PRIu32""
pci_nvme_identify_ctrl_list(uint8_t cns, uint16_t cntid) "cns 0x%"PRIx8" cntid %"PRIu16""
pci_nvme_identify_pri_ctrl_cap(uint16_t cntlid) "identify primary controller capabilities cntlid=%"PRIu16""
+pci_nvme_identify_sec_ctrl_list(uint16_t cntlid, uint8_t numcntl) "identify secondary controller list cntlid=%"PRIu16" numcntl=%"PRIu8""
pci_nvme_identify_ns_csi(uint32_t ns, uint8_t csi) "nsid=%"PRIu32", csi=0x%"PRIx8""
pci_nvme_identify_nslist(uint32_t ns) "nsid %"PRIu32""
pci_nvme_identify_nslist_csi(uint16_t ns, uint8_t csi) "nsid=%"PRIu16", csi=0x%"PRIx8""
diff --git a/include/block/nvme.h b/include/block/nvme.h
index 524a04fb94e..94efd32578c 100644
--- a/include/block/nvme.h
+++ b/include/block/nvme.h
@@ -1034,6 +1034,7 @@ enum NvmeIdCns {
NVME_ID_CNS_NS_ATTACHED_CTRL_LIST = 0x12,
NVME_ID_CNS_CTRL_LIST = 0x13,
NVME_ID_CNS_PRIMARY_CTRL_CAP = 0x14,
+ NVME_ID_CNS_SECONDARY_CTRL_LIST = 0x15,
NVME_ID_CNS_CS_NS_PRESENT_LIST = 0x1a,
NVME_ID_CNS_CS_NS_PRESENT = 0x1b,
NVME_ID_CNS_IO_COMMAND_SET = 0x1c,
@@ -1575,6 +1576,23 @@ typedef struct QEMU_PACKED NvmePriCtrlCap {
uint8_t rsvd80[4016];
} NvmePriCtrlCap;
+typedef struct QEMU_PACKED NvmeSecCtrlEntry {
+ uint16_t scid;
+ uint16_t pcid;
+ uint8_t scs;
+ uint8_t rsvd5[3];
+ uint16_t vfn;
+ uint16_t nvq;
+ uint16_t nvi;
+ uint8_t rsvd14[18];
+} NvmeSecCtrlEntry;
+
+typedef struct QEMU_PACKED NvmeSecCtrlList {
+ uint8_t numcntl;
+ uint8_t rsvd1[31];
+ NvmeSecCtrlEntry sec[127];
+} NvmeSecCtrlList;
+
static inline void _nvme_check_size(void)
{
QEMU_BUILD_BUG_ON(sizeof(NvmeBar) != 4096);
@@ -1611,5 +1629,7 @@ static inline void _nvme_check_size(void)
QEMU_BUILD_BUG_ON(sizeof(NvmeZoneDescr) != 64);
QEMU_BUILD_BUG_ON(sizeof(NvmeDifTuple) != 16);
QEMU_BUILD_BUG_ON(sizeof(NvmePriCtrlCap) != 4096);
+ QEMU_BUILD_BUG_ON(sizeof(NvmeSecCtrlEntry) != 32);
+ QEMU_BUILD_BUG_ON(sizeof(NvmeSecCtrlList) != 4096);
}
#endif
--
2.25.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v7 04/12] hw/nvme: Implement the Function Level Reset
2022-03-18 19:18 [PATCH v7 00/12] hw/nvme: SR-IOV with Virtualization Enhancements Lukasz Maniak
` (2 preceding siblings ...)
2022-03-18 19:18 ` [PATCH v7 03/12] hw/nvme: Add support for Secondary Controller List Lukasz Maniak
@ 2022-03-18 19:18 ` Lukasz Maniak
2022-03-18 19:18 ` [PATCH v7 05/12] hw/nvme: Make max_ioqpairs and msix_qsize configurable in runtime Lukasz Maniak
` (9 subsequent siblings)
13 siblings, 0 replies; 21+ messages in thread
From: Lukasz Maniak @ 2022-03-18 19:18 UTC (permalink / raw)
To: qemu-devel
Cc: fam, kwolf, lukasz.maniak, stefanha, qemu-block, mst, k.jensen,
armbru, f4bug, kbusch, its, hreitz, xypron.glpk, lukasz.gieryk,
ani, imammedo
From: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
This patch implements the Function Level Reset, a feature currently not
implemented for the Nvme device, while listed as a mandatory ("shall")
in the 1.4 spec.
The implementation reuses FLR-related building blocks defined for the
pci-bridge module, and follows the same logic:
- FLR capability is advertised in the PCIE config,
- custom pci_write_config callback detects a write to the trigger
register and performs the PCI reset,
- which, eventually, calls the custom dc->reset handler.
Depending on reset type, parts of the state should (or should not) be
cleared. To distinguish the type of reset, an additional parameter is
passed to the reset function.
This patch also enables advertisement of the Power Management PCI
capability. The main reason behind it is to announce the no_soft_reset=1
bit, to signal SR-IOV support where each VF can be reset individually.
The implementation purposedly ignores writes to the PMCS.PS register,
as even such naïve behavior is enough to correctly handle the D3->D0
transition.
It’s worth to note, that the power state transition back to to D3, with
all the corresponding side effects, wasn't and stil isn't handled
properly.
Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
---
hw/nvme/ctrl.c | 52 ++++++++++++++++++++++++++++++++++++++++----
hw/nvme/nvme.h | 5 +++++
hw/nvme/trace-events | 1 +
3 files changed, 54 insertions(+), 4 deletions(-)
diff --git a/hw/nvme/ctrl.c b/hw/nvme/ctrl.c
index b1b1bebbaf2..e6d6e5840af 100644
--- a/hw/nvme/ctrl.c
+++ b/hw/nvme/ctrl.c
@@ -5901,7 +5901,7 @@ static void nvme_process_sq(void *opaque)
}
}
-static void nvme_ctrl_reset(NvmeCtrl *n)
+static void nvme_ctrl_reset(NvmeCtrl *n, NvmeResetType rst)
{
NvmeNamespace *ns;
int i;
@@ -5933,7 +5933,9 @@ static void nvme_ctrl_reset(NvmeCtrl *n)
}
if (!pci_is_vf(&n->parent_obj) && n->params.sriov_max_vfs) {
- pcie_sriov_pf_disable_vfs(&n->parent_obj);
+ if (rst != NVME_RESET_CONTROLLER) {
+ pcie_sriov_pf_disable_vfs(&n->parent_obj);
+ }
}
n->aer_queued = 0;
@@ -6167,7 +6169,7 @@ static void nvme_write_bar(NvmeCtrl *n, hwaddr offset, uint64_t data,
}
} else if (!NVME_CC_EN(data) && NVME_CC_EN(cc)) {
trace_pci_nvme_mmio_stopped();
- nvme_ctrl_reset(n);
+ nvme_ctrl_reset(n, NVME_RESET_CONTROLLER);
cc = 0;
csts &= ~NVME_CSTS_READY;
}
@@ -6725,6 +6727,28 @@ static void nvme_init_sriov(NvmeCtrl *n, PCIDevice *pci_dev, uint16_t offset,
PCI_BASE_ADDRESS_MEM_TYPE_64, bar_size);
}
+static int nvme_add_pm_capability(PCIDevice *pci_dev, uint8_t offset)
+{
+ Error *err = NULL;
+ int ret;
+
+ ret = pci_add_capability(pci_dev, PCI_CAP_ID_PM, offset,
+ PCI_PM_SIZEOF, &err);
+ if (err) {
+ error_report_err(err);
+ return ret;
+ }
+
+ pci_set_word(pci_dev->config + offset + PCI_PM_PMC,
+ PCI_PM_CAP_VER_1_2);
+ pci_set_word(pci_dev->config + offset + PCI_PM_CTRL,
+ PCI_PM_CTRL_NO_SOFT_RESET);
+ pci_set_word(pci_dev->wmask + offset + PCI_PM_CTRL,
+ PCI_PM_CTRL_STATE_MASK);
+
+ return 0;
+}
+
static int nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev, Error **errp)
{
uint8_t *pci_conf = pci_dev->config;
@@ -6746,7 +6770,9 @@ static int nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev, Error **errp)
}
pci_config_set_class(pci_conf, PCI_CLASS_STORAGE_EXPRESS);
+ nvme_add_pm_capability(pci_dev, 0x60);
pcie_endpoint_cap_init(pci_dev, 0x80);
+ pcie_cap_flr_init(pci_dev);
if (n->params.sriov_max_vfs) {
pcie_ari_init(pci_dev, 0x100, 1);
}
@@ -6997,7 +7023,7 @@ static void nvme_exit(PCIDevice *pci_dev)
NvmeNamespace *ns;
int i;
- nvme_ctrl_reset(n);
+ nvme_ctrl_reset(n, NVME_RESET_FUNCTION);
if (n->subsys) {
for (i = 1; i <= NVME_MAX_NAMESPACES; i++) {
@@ -7096,6 +7122,22 @@ static void nvme_set_smart_warning(Object *obj, Visitor *v, const char *name,
}
}
+static void nvme_pci_reset(DeviceState *qdev)
+{
+ PCIDevice *pci_dev = PCI_DEVICE(qdev);
+ NvmeCtrl *n = NVME(pci_dev);
+
+ trace_pci_nvme_pci_reset();
+ nvme_ctrl_reset(n, NVME_RESET_FUNCTION);
+}
+
+static void nvme_pci_write_config(PCIDevice *dev, uint32_t address,
+ uint32_t val, int len)
+{
+ pci_default_write_config(dev, address, val, len);
+ pcie_cap_flr_write_config(dev, address, val, len);
+}
+
static const VMStateDescription nvme_vmstate = {
.name = "nvme",
.unmigratable = 1,
@@ -7107,6 +7149,7 @@ static void nvme_class_init(ObjectClass *oc, void *data)
PCIDeviceClass *pc = PCI_DEVICE_CLASS(oc);
pc->realize = nvme_realize;
+ pc->config_write = nvme_pci_write_config;
pc->exit = nvme_exit;
pc->class_id = PCI_CLASS_STORAGE_EXPRESS;
pc->revision = 2;
@@ -7115,6 +7158,7 @@ static void nvme_class_init(ObjectClass *oc, void *data)
dc->desc = "Non-Volatile Memory Express";
device_class_set_props(dc, nvme_props);
dc->vmsd = &nvme_vmstate;
+ dc->reset = nvme_pci_reset;
}
static void nvme_instance_init(Object *obj)
diff --git a/hw/nvme/nvme.h b/hw/nvme/nvme.h
index 7581ef26fdb..4ca6cb2bac1 100644
--- a/hw/nvme/nvme.h
+++ b/hw/nvme/nvme.h
@@ -487,6 +487,11 @@ typedef struct NvmeCtrl {
NvmeSecCtrlList sec_ctrl_list;
} NvmeCtrl;
+typedef enum NvmeResetType {
+ NVME_RESET_FUNCTION = 0,
+ NVME_RESET_CONTROLLER = 1,
+} NvmeResetType;
+
static inline NvmeNamespace *nvme_ns(NvmeCtrl *n, uint32_t nsid)
{
if (!nsid || nsid > NVME_MAX_NAMESPACES) {
diff --git a/hw/nvme/trace-events b/hw/nvme/trace-events
index 889bbb3101e..b07864c5732 100644
--- a/hw/nvme/trace-events
+++ b/hw/nvme/trace-events
@@ -110,6 +110,7 @@ pci_nvme_zd_extension_set(uint32_t zone_idx) "set descriptor extension for zone_
pci_nvme_clear_ns_close(uint32_t state, uint64_t slba) "zone state=%"PRIu32", slba=%"PRIu64" transitioned to Closed state"
pci_nvme_clear_ns_reset(uint32_t state, uint64_t slba) "zone state=%"PRIu32", slba=%"PRIu64" transitioned to Empty state"
pci_nvme_zoned_zrwa_implicit_flush(uint64_t zslba, uint32_t nlb) "zslba 0x%"PRIx64" nlb %"PRIu32""
+pci_nvme_pci_reset(void) "PCI Function Level Reset"
# error conditions
pci_nvme_err_mdts(size_t len) "len %zu"
--
2.25.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v7 05/12] hw/nvme: Make max_ioqpairs and msix_qsize configurable in runtime
2022-03-18 19:18 [PATCH v7 00/12] hw/nvme: SR-IOV with Virtualization Enhancements Lukasz Maniak
` (3 preceding siblings ...)
2022-03-18 19:18 ` [PATCH v7 04/12] hw/nvme: Implement the Function Level Reset Lukasz Maniak
@ 2022-03-18 19:18 ` Lukasz Maniak
2022-03-18 19:18 ` [PATCH v7 06/12] hw/nvme: Remove reg_size variable and update BAR0 size calculation Lukasz Maniak
` (8 subsequent siblings)
13 siblings, 0 replies; 21+ messages in thread
From: Lukasz Maniak @ 2022-03-18 19:18 UTC (permalink / raw)
To: qemu-devel
Cc: fam, kwolf, lukasz.maniak, stefanha, qemu-block, mst, k.jensen,
armbru, f4bug, kbusch, its, hreitz, xypron.glpk, lukasz.gieryk,
ani, imammedo
From: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
The NVMe device defines two properties: max_ioqpairs, msix_qsize. Having
them as constants is problematic for SR-IOV support.
SR-IOV introduces virtual resources (queues, interrupts) that can be
assigned to PF and its dependent VFs. Each device, following a reset,
should work with the configured number of queues. A single constant is
no longer sufficient to hold the whole state.
This patch tries to solve the problem by introducing additional
variables in NvmeCtrl’s state. The variables for, e.g., managing queues
are therefore organized as:
- n->params.max_ioqpairs – no changes, constant set by the user
- n->(mutable_state) – (not a part of this patch) user-configurable,
specifies number of queues available _after_
reset
- n->conf_ioqpairs - (new) used in all the places instead of the ‘old’
n->params.max_ioqpairs; initialized in realize()
and updated during reset() to reflect user’s
changes to the mutable state
Since the number of available i/o queues and interrupts can change in
runtime, buffers for sq/cqs and the MSIX-related structures are
allocated big enough to handle the limits, to completely avoid the
complicated reallocation. A helper function (nvme_update_msixcap_ts)
updates the corresponding capability register, to signal configuration
changes.
Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
---
hw/nvme/ctrl.c | 52 ++++++++++++++++++++++++++++++++++----------------
hw/nvme/nvme.h | 2 ++
2 files changed, 38 insertions(+), 16 deletions(-)
diff --git a/hw/nvme/ctrl.c b/hw/nvme/ctrl.c
index e6d6e5840af..12372038075 100644
--- a/hw/nvme/ctrl.c
+++ b/hw/nvme/ctrl.c
@@ -448,12 +448,12 @@ static bool nvme_nsid_valid(NvmeCtrl *n, uint32_t nsid)
static int nvme_check_sqid(NvmeCtrl *n, uint16_t sqid)
{
- return sqid < n->params.max_ioqpairs + 1 && n->sq[sqid] != NULL ? 0 : -1;
+ return sqid < n->conf_ioqpairs + 1 && n->sq[sqid] != NULL ? 0 : -1;
}
static int nvme_check_cqid(NvmeCtrl *n, uint16_t cqid)
{
- return cqid < n->params.max_ioqpairs + 1 && n->cq[cqid] != NULL ? 0 : -1;
+ return cqid < n->conf_ioqpairs + 1 && n->cq[cqid] != NULL ? 0 : -1;
}
static void nvme_inc_cq_tail(NvmeCQueue *cq)
@@ -4290,8 +4290,7 @@ static uint16_t nvme_create_sq(NvmeCtrl *n, NvmeRequest *req)
trace_pci_nvme_err_invalid_create_sq_cqid(cqid);
return NVME_INVALID_CQID | NVME_DNR;
}
- if (unlikely(!sqid || sqid > n->params.max_ioqpairs ||
- n->sq[sqid] != NULL)) {
+ if (unlikely(!sqid || sqid > n->conf_ioqpairs || n->sq[sqid] != NULL)) {
trace_pci_nvme_err_invalid_create_sq_sqid(sqid);
return NVME_INVALID_QID | NVME_DNR;
}
@@ -4643,8 +4642,7 @@ static uint16_t nvme_create_cq(NvmeCtrl *n, NvmeRequest *req)
trace_pci_nvme_create_cq(prp1, cqid, vector, qsize, qflags,
NVME_CQ_FLAGS_IEN(qflags) != 0);
- if (unlikely(!cqid || cqid > n->params.max_ioqpairs ||
- n->cq[cqid] != NULL)) {
+ if (unlikely(!cqid || cqid > n->conf_ioqpairs || n->cq[cqid] != NULL)) {
trace_pci_nvme_err_invalid_create_cq_cqid(cqid);
return NVME_INVALID_QID | NVME_DNR;
}
@@ -4660,7 +4658,7 @@ static uint16_t nvme_create_cq(NvmeCtrl *n, NvmeRequest *req)
trace_pci_nvme_err_invalid_create_cq_vector(vector);
return NVME_INVALID_IRQ_VECTOR | NVME_DNR;
}
- if (unlikely(vector >= n->params.msix_qsize)) {
+ if (unlikely(vector >= n->conf_msix_qsize)) {
trace_pci_nvme_err_invalid_create_cq_vector(vector);
return NVME_INVALID_IRQ_VECTOR | NVME_DNR;
}
@@ -5261,13 +5259,12 @@ defaults:
break;
case NVME_NUMBER_OF_QUEUES:
- result = (n->params.max_ioqpairs - 1) |
- ((n->params.max_ioqpairs - 1) << 16);
+ result = (n->conf_ioqpairs - 1) | ((n->conf_ioqpairs - 1) << 16);
trace_pci_nvme_getfeat_numq(result);
break;
case NVME_INTERRUPT_VECTOR_CONF:
iv = dw11 & 0xffff;
- if (iv >= n->params.max_ioqpairs + 1) {
+ if (iv >= n->conf_ioqpairs + 1) {
return NVME_INVALID_FIELD | NVME_DNR;
}
@@ -5423,10 +5420,10 @@ static uint16_t nvme_set_feature(NvmeCtrl *n, NvmeRequest *req)
trace_pci_nvme_setfeat_numq((dw11 & 0xffff) + 1,
((dw11 >> 16) & 0xffff) + 1,
- n->params.max_ioqpairs,
- n->params.max_ioqpairs);
- req->cqe.result = cpu_to_le32((n->params.max_ioqpairs - 1) |
- ((n->params.max_ioqpairs - 1) << 16));
+ n->conf_ioqpairs,
+ n->conf_ioqpairs);
+ req->cqe.result = cpu_to_le32((n->conf_ioqpairs - 1) |
+ ((n->conf_ioqpairs - 1) << 16));
break;
case NVME_ASYNCHRONOUS_EVENT_CONF:
n->features.async_config = dw11;
@@ -5901,8 +5898,24 @@ static void nvme_process_sq(void *opaque)
}
}
+static void nvme_update_msixcap_ts(PCIDevice *pci_dev, uint32_t table_size)
+{
+ uint8_t *config;
+
+ if (!msix_present(pci_dev)) {
+ return;
+ }
+
+ assert(table_size > 0 && table_size <= pci_dev->msix_entries_nr);
+
+ config = pci_dev->config + pci_dev->msix_cap;
+ pci_set_word_by_mask(config + PCI_MSIX_FLAGS, PCI_MSIX_FLAGS_QSIZE,
+ table_size - 1);
+}
+
static void nvme_ctrl_reset(NvmeCtrl *n, NvmeResetType rst)
{
+ PCIDevice *pci_dev = &n->parent_obj;
NvmeNamespace *ns;
int i;
@@ -5932,15 +5945,17 @@ static void nvme_ctrl_reset(NvmeCtrl *n, NvmeResetType rst)
g_free(event);
}
- if (!pci_is_vf(&n->parent_obj) && n->params.sriov_max_vfs) {
+ if (!pci_is_vf(pci_dev) && n->params.sriov_max_vfs) {
if (rst != NVME_RESET_CONTROLLER) {
- pcie_sriov_pf_disable_vfs(&n->parent_obj);
+ pcie_sriov_pf_disable_vfs(pci_dev);
}
}
n->aer_queued = 0;
n->outstanding_aers = 0;
n->qs_created = false;
+
+ nvme_update_msixcap_ts(pci_dev, n->conf_msix_qsize);
}
static void nvme_ctrl_shutdown(NvmeCtrl *n)
@@ -6651,6 +6666,9 @@ static void nvme_init_state(NvmeCtrl *n)
NvmeSecCtrlEntry *sctrl;
int i;
+ n->conf_ioqpairs = n->params.max_ioqpairs;
+ n->conf_msix_qsize = n->params.msix_qsize;
+
/* add one to max_ioqpairs to account for the admin queue pair */
n->reg_size = pow2ceil(sizeof(NvmeBar) +
2 * (n->params.max_ioqpairs + 1) * NVME_DB_SIZE);
@@ -6812,6 +6830,8 @@ static int nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev, Error **errp)
}
}
+ nvme_update_msixcap_ts(pci_dev, n->conf_msix_qsize);
+
if (n->params.cmb_size_mb) {
nvme_init_cmb(n, pci_dev);
}
diff --git a/hw/nvme/nvme.h b/hw/nvme/nvme.h
index 4ca6cb2bac1..5bd6ac698bc 100644
--- a/hw/nvme/nvme.h
+++ b/hw/nvme/nvme.h
@@ -438,6 +438,8 @@ typedef struct NvmeCtrl {
uint64_t starttime_ms;
uint16_t temperature;
uint8_t smart_critical_warning;
+ uint32_t conf_msix_qsize;
+ uint32_t conf_ioqpairs;
struct {
MemoryRegion mem;
--
2.25.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v7 06/12] hw/nvme: Remove reg_size variable and update BAR0 size calculation
2022-03-18 19:18 [PATCH v7 00/12] hw/nvme: SR-IOV with Virtualization Enhancements Lukasz Maniak
` (4 preceding siblings ...)
2022-03-18 19:18 ` [PATCH v7 05/12] hw/nvme: Make max_ioqpairs and msix_qsize configurable in runtime Lukasz Maniak
@ 2022-03-18 19:18 ` Lukasz Maniak
2022-03-18 19:18 ` [PATCH v7 07/12] hw/nvme: Calculate BAR attributes in a function Lukasz Maniak
` (7 subsequent siblings)
13 siblings, 0 replies; 21+ messages in thread
From: Lukasz Maniak @ 2022-03-18 19:18 UTC (permalink / raw)
To: qemu-devel
Cc: fam, kwolf, lukasz.maniak, stefanha, qemu-block, mst, k.jensen,
armbru, f4bug, kbusch, its, hreitz, xypron.glpk, lukasz.gieryk,
ani, imammedo
From: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
The n->reg_size parameter unnecessarily splits the BAR0 size calculation
in two phases; removed to simplify the code.
With all the calculations done in one place, it seems the pow2ceil,
applied originally to reg_size, is unnecessary. The rounding should
happen as the last step, when BAR size includes Nvme registers, queue
registers, and MSIX-related space.
Finally, the size of the mmio memory region is extended to cover the 1st
4KiB padding (see the map below). Access to this range is handled as
interaction with a non-existing queue and generates an error trace, so
actually nothing changes, while the reg_size variable is no longer needed.
--------------------
| BAR0 |
--------------------
[Nvme Registers ]
[Queues ]
[power-of-2 padding] - removed in this patch
[4KiB padding (1) ]
[MSIX TABLE ]
[4KiB padding (2) ]
[MSIX PBA ]
[power-of-2 padding]
Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
---
hw/nvme/ctrl.c | 10 +++++-----
hw/nvme/nvme.h | 1 -
2 files changed, 5 insertions(+), 6 deletions(-)
diff --git a/hw/nvme/ctrl.c b/hw/nvme/ctrl.c
index 12372038075..f34d73a00c8 100644
--- a/hw/nvme/ctrl.c
+++ b/hw/nvme/ctrl.c
@@ -6669,9 +6669,6 @@ static void nvme_init_state(NvmeCtrl *n)
n->conf_ioqpairs = n->params.max_ioqpairs;
n->conf_msix_qsize = n->params.msix_qsize;
- /* add one to max_ioqpairs to account for the admin queue pair */
- n->reg_size = pow2ceil(sizeof(NvmeBar) +
- 2 * (n->params.max_ioqpairs + 1) * NVME_DB_SIZE);
n->sq = g_new0(NvmeSQueue *, n->params.max_ioqpairs + 1);
n->cq = g_new0(NvmeCQueue *, n->params.max_ioqpairs + 1);
n->temperature = NVME_TEMPERATURE;
@@ -6795,7 +6792,10 @@ static int nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev, Error **errp)
pcie_ari_init(pci_dev, 0x100, 1);
}
- bar_size = QEMU_ALIGN_UP(n->reg_size, 4 * KiB);
+ /* add one to max_ioqpairs to account for the admin queue pair */
+ bar_size = sizeof(NvmeBar) +
+ 2 * (n->params.max_ioqpairs + 1) * NVME_DB_SIZE;
+ bar_size = QEMU_ALIGN_UP(bar_size, 4 * KiB);
msix_table_offset = bar_size;
msix_table_size = PCI_MSIX_ENTRY_SIZE * n->params.msix_qsize;
@@ -6809,7 +6809,7 @@ static int nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev, Error **errp)
memory_region_init(&n->bar0, OBJECT(n), "nvme-bar0", bar_size);
memory_region_init_io(&n->iomem, OBJECT(n), &nvme_mmio_ops, n, "nvme",
- n->reg_size);
+ msix_table_offset);
memory_region_add_subregion(&n->bar0, 0, &n->iomem);
if (pci_is_vf(pci_dev)) {
diff --git a/hw/nvme/nvme.h b/hw/nvme/nvme.h
index 5bd6ac698bc..adde718105b 100644
--- a/hw/nvme/nvme.h
+++ b/hw/nvme/nvme.h
@@ -428,7 +428,6 @@ typedef struct NvmeCtrl {
uint16_t max_prp_ents;
uint16_t cqe_size;
uint16_t sqe_size;
- uint32_t reg_size;
uint32_t max_q_ents;
uint8_t outstanding_aers;
uint32_t irq_status;
--
2.25.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v7 07/12] hw/nvme: Calculate BAR attributes in a function
2022-03-18 19:18 [PATCH v7 00/12] hw/nvme: SR-IOV with Virtualization Enhancements Lukasz Maniak
` (5 preceding siblings ...)
2022-03-18 19:18 ` [PATCH v7 06/12] hw/nvme: Remove reg_size variable and update BAR0 size calculation Lukasz Maniak
@ 2022-03-18 19:18 ` Lukasz Maniak
2022-03-18 19:18 ` [PATCH v7 08/12] hw/nvme: Initialize capability structures for primary/secondary controllers Lukasz Maniak
` (6 subsequent siblings)
13 siblings, 0 replies; 21+ messages in thread
From: Lukasz Maniak @ 2022-03-18 19:18 UTC (permalink / raw)
To: qemu-devel
Cc: fam, kwolf, lukasz.maniak, stefanha, qemu-block, mst, k.jensen,
armbru, f4bug, kbusch, its, hreitz, xypron.glpk, lukasz.gieryk,
ani, imammedo
From: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
An NVMe device with SR-IOV capability calculates the BAR size
differently for PF and VF, so it makes sense to extract the common code
to a separate function.
Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
---
hw/nvme/ctrl.c | 45 +++++++++++++++++++++++++++++++--------------
1 file changed, 31 insertions(+), 14 deletions(-)
diff --git a/hw/nvme/ctrl.c b/hw/nvme/ctrl.c
index f34d73a00c8..f0554a07c40 100644
--- a/hw/nvme/ctrl.c
+++ b/hw/nvme/ctrl.c
@@ -6728,6 +6728,34 @@ static void nvme_init_pmr(NvmeCtrl *n, PCIDevice *pci_dev)
memory_region_set_enabled(&n->pmr.dev->mr, false);
}
+static uint64_t nvme_bar_size(unsigned total_queues, unsigned total_irqs,
+ unsigned *msix_table_offset,
+ unsigned *msix_pba_offset)
+{
+ uint64_t bar_size, msix_table_size, msix_pba_size;
+
+ bar_size = sizeof(NvmeBar) + 2 * total_queues * NVME_DB_SIZE;
+ bar_size = QEMU_ALIGN_UP(bar_size, 4 * KiB);
+
+ if (msix_table_offset) {
+ *msix_table_offset = bar_size;
+ }
+
+ msix_table_size = PCI_MSIX_ENTRY_SIZE * total_irqs;
+ bar_size += msix_table_size;
+ bar_size = QEMU_ALIGN_UP(bar_size, 4 * KiB);
+
+ if (msix_pba_offset) {
+ *msix_pba_offset = bar_size;
+ }
+
+ msix_pba_size = QEMU_ALIGN_UP(total_irqs, 64) / 8;
+ bar_size += msix_pba_size;
+
+ bar_size = pow2ceil(bar_size);
+ return bar_size;
+}
+
static void nvme_init_sriov(NvmeCtrl *n, PCIDevice *pci_dev, uint16_t offset,
uint64_t bar_size)
{
@@ -6767,7 +6795,7 @@ static int nvme_add_pm_capability(PCIDevice *pci_dev, uint8_t offset)
static int nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev, Error **errp)
{
uint8_t *pci_conf = pci_dev->config;
- uint64_t bar_size, msix_table_size, msix_pba_size;
+ uint64_t bar_size;
unsigned msix_table_offset, msix_pba_offset;
int ret;
@@ -6793,19 +6821,8 @@ static int nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev, Error **errp)
}
/* add one to max_ioqpairs to account for the admin queue pair */
- bar_size = sizeof(NvmeBar) +
- 2 * (n->params.max_ioqpairs + 1) * NVME_DB_SIZE;
- bar_size = QEMU_ALIGN_UP(bar_size, 4 * KiB);
- msix_table_offset = bar_size;
- msix_table_size = PCI_MSIX_ENTRY_SIZE * n->params.msix_qsize;
-
- bar_size += msix_table_size;
- bar_size = QEMU_ALIGN_UP(bar_size, 4 * KiB);
- msix_pba_offset = bar_size;
- msix_pba_size = QEMU_ALIGN_UP(n->params.msix_qsize, 64) / 8;
-
- bar_size += msix_pba_size;
- bar_size = pow2ceil(bar_size);
+ bar_size = nvme_bar_size(n->params.max_ioqpairs + 1, n->params.msix_qsize,
+ &msix_table_offset, &msix_pba_offset);
memory_region_init(&n->bar0, OBJECT(n), "nvme-bar0", bar_size);
memory_region_init_io(&n->iomem, OBJECT(n), &nvme_mmio_ops, n, "nvme",
--
2.25.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v7 08/12] hw/nvme: Initialize capability structures for primary/secondary controllers
2022-03-18 19:18 [PATCH v7 00/12] hw/nvme: SR-IOV with Virtualization Enhancements Lukasz Maniak
` (6 preceding siblings ...)
2022-03-18 19:18 ` [PATCH v7 07/12] hw/nvme: Calculate BAR attributes in a function Lukasz Maniak
@ 2022-03-18 19:18 ` Lukasz Maniak
2022-03-18 19:18 ` [PATCH v7 09/12] hw/nvme: Add support for the Virtualization Management command Lukasz Maniak
` (5 subsequent siblings)
13 siblings, 0 replies; 21+ messages in thread
From: Lukasz Maniak @ 2022-03-18 19:18 UTC (permalink / raw)
To: qemu-devel
Cc: fam, kwolf, lukasz.maniak, stefanha, qemu-block, mst, k.jensen,
armbru, f4bug, kbusch, its, hreitz, xypron.glpk, lukasz.gieryk,
ani, imammedo
From: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
With four new properties:
- sriov_v{i,q}_flexible,
- sriov_max_v{i,q}_per_vf,
one can configure the number of available flexible resources, as well as
the limits. The primary and secondary controller capability structures
are initialized accordingly.
Since the number of available queues (interrupts) now varies between
VF/PF, BAR size calculation is also adjusted.
Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
---
hw/nvme/ctrl.c | 141 ++++++++++++++++++++++++++++++++++++++++---
hw/nvme/nvme.h | 4 ++
include/block/nvme.h | 5 ++
3 files changed, 143 insertions(+), 7 deletions(-)
diff --git a/hw/nvme/ctrl.c b/hw/nvme/ctrl.c
index f0554a07c40..011231ab5a6 100644
--- a/hw/nvme/ctrl.c
+++ b/hw/nvme/ctrl.c
@@ -36,6 +36,10 @@
* zoned.zasl=<N[optional]>, \
* zoned.auto_transition=<on|off[optional]>, \
* sriov_max_vfs=<N[optional]> \
+ * sriov_vq_flexible=<N[optional]> \
+ * sriov_vi_flexible=<N[optional]> \
+ * sriov_max_vi_per_vf=<N[optional]> \
+ * sriov_max_vq_per_vf=<N[optional]> \
* subsys=<subsys_id>
* -device nvme-ns,drive=<drive_id>,bus=<bus_name>,nsid=<nsid>,\
* zoned=<true|false[optional]>, \
@@ -113,6 +117,29 @@
* enables reporting of both SR-IOV and ARI capabilities by the NVMe device.
* Virtual function controllers will not report SR-IOV capability.
*
+ * NOTE: Single Root I/O Virtualization support is experimental.
+ * All the related parameters may be subject to change.
+ *
+ * - `sriov_vq_flexible`
+ * Indicates the total number of flexible queue resources assignable to all
+ * the secondary controllers. Implicitly sets the number of primary
+ * controller's private resources to `(max_ioqpairs - sriov_vq_flexible)`.
+ *
+ * - `sriov_vi_flexible`
+ * Indicates the total number of flexible interrupt resources assignable to
+ * all the secondary controllers. Implicitly sets the number of primary
+ * controller's private resources to `(msix_qsize - sriov_vi_flexible)`.
+ *
+ * - `sriov_max_vi_per_vf`
+ * Indicates the maximum number of virtual interrupt resources assignable
+ * to a secondary controller. The default 0 resolves to
+ * `(sriov_vi_flexible / sriov_max_vfs)`.
+ *
+ * - `sriov_max_vq_per_vf`
+ * Indicates the maximum number of virtual queue resources assignable to
+ * a secondary controller. The default 0 resolves to
+ * `(sriov_vq_flexible / sriov_max_vfs)`.
+ *
* nvme namespace device parameters
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* - `shared`
@@ -185,6 +212,7 @@
#define NVME_NUM_FW_SLOTS 1
#define NVME_DEFAULT_MAX_ZA_SIZE (128 * KiB)
#define NVME_MAX_VFS 127
+#define NVME_VF_RES_GRANULARITY 1
#define NVME_VF_OFFSET 0x1
#define NVME_VF_STRIDE 1
@@ -6656,6 +6684,53 @@ static void nvme_check_constraints(NvmeCtrl *n, Error **errp)
error_setg(errp, "PMR is not supported with SR-IOV");
return;
}
+
+ if (!params->sriov_vq_flexible || !params->sriov_vi_flexible) {
+ error_setg(errp, "both sriov_vq_flexible and sriov_vi_flexible"
+ " must be set for the use of SR-IOV");
+ return;
+ }
+
+ if (params->sriov_vq_flexible < params->sriov_max_vfs * 2) {
+ error_setg(errp, "sriov_vq_flexible must be greater than or equal"
+ " to %d (sriov_max_vfs * 2)", params->sriov_max_vfs * 2);
+ return;
+ }
+
+ if (params->max_ioqpairs < params->sriov_vq_flexible + 2) {
+ error_setg(errp, "(max_ioqpairs - sriov_vq_flexible) must be"
+ " greater than or equal to 2");
+ return;
+ }
+
+ if (params->sriov_vi_flexible < params->sriov_max_vfs) {
+ error_setg(errp, "sriov_vi_flexible must be greater than or equal"
+ " to %d (sriov_max_vfs)", params->sriov_max_vfs);
+ return;
+ }
+
+ if (params->msix_qsize < params->sriov_vi_flexible + 1) {
+ error_setg(errp, "(msix_qsize - sriov_vi_flexible) must be"
+ " greater than or equal to 1");
+ return;
+ }
+
+ if (params->sriov_max_vi_per_vf &&
+ (params->sriov_max_vi_per_vf - 1) % NVME_VF_RES_GRANULARITY) {
+ error_setg(errp, "sriov_max_vi_per_vf must meet:"
+ " (sriov_max_vi_per_vf - 1) %% %d == 0 and"
+ " sriov_max_vi_per_vf >= 1", NVME_VF_RES_GRANULARITY);
+ return;
+ }
+
+ if (params->sriov_max_vq_per_vf &&
+ (params->sriov_max_vq_per_vf < 2 ||
+ (params->sriov_max_vq_per_vf - 1) % NVME_VF_RES_GRANULARITY)) {
+ error_setg(errp, "sriov_max_vq_per_vf must meet:"
+ " (sriov_max_vq_per_vf - 1) %% %d == 0 and"
+ " sriov_max_vq_per_vf >= 2", NVME_VF_RES_GRANULARITY);
+ return;
+ }
}
}
@@ -6664,10 +6739,19 @@ static void nvme_init_state(NvmeCtrl *n)
NvmePriCtrlCap *cap = &n->pri_ctrl_cap;
NvmeSecCtrlList *list = &n->sec_ctrl_list;
NvmeSecCtrlEntry *sctrl;
+ uint8_t max_vfs;
int i;
- n->conf_ioqpairs = n->params.max_ioqpairs;
- n->conf_msix_qsize = n->params.msix_qsize;
+ if (pci_is_vf(&n->parent_obj)) {
+ sctrl = nvme_sctrl(n);
+ max_vfs = 0;
+ n->conf_ioqpairs = sctrl->nvq ? le16_to_cpu(sctrl->nvq) - 1 : 0;
+ n->conf_msix_qsize = sctrl->nvi ? le16_to_cpu(sctrl->nvi) : 1;
+ } else {
+ max_vfs = n->params.sriov_max_vfs;
+ n->conf_ioqpairs = n->params.max_ioqpairs;
+ n->conf_msix_qsize = n->params.msix_qsize;
+ }
n->sq = g_new0(NvmeSQueue *, n->params.max_ioqpairs + 1);
n->cq = g_new0(NvmeCQueue *, n->params.max_ioqpairs + 1);
@@ -6676,14 +6760,41 @@ static void nvme_init_state(NvmeCtrl *n)
n->starttime_ms = qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL);
n->aer_reqs = g_new0(NvmeRequest *, n->params.aerl + 1);
- list->numcntl = cpu_to_le16(n->params.sriov_max_vfs);
- for (i = 0; i < n->params.sriov_max_vfs; i++) {
+ list->numcntl = cpu_to_le16(max_vfs);
+ for (i = 0; i < max_vfs; i++) {
sctrl = &list->sec[i];
sctrl->pcid = cpu_to_le16(n->cntlid);
sctrl->vfn = cpu_to_le16(i + 1);
}
cap->cntlid = cpu_to_le16(n->cntlid);
+ cap->crt = NVME_CRT_VQ | NVME_CRT_VI;
+
+ if (pci_is_vf(&n->parent_obj)) {
+ cap->vqprt = cpu_to_le16(1 + n->conf_ioqpairs);
+ } else {
+ cap->vqprt = cpu_to_le16(1 + n->params.max_ioqpairs -
+ n->params.sriov_vq_flexible);
+ cap->vqfrt = cpu_to_le32(n->params.sriov_vq_flexible);
+ cap->vqrfap = cap->vqfrt;
+ cap->vqgran = cpu_to_le16(NVME_VF_RES_GRANULARITY);
+ cap->vqfrsm = n->params.sriov_max_vq_per_vf ?
+ cpu_to_le16(n->params.sriov_max_vq_per_vf) :
+ cap->vqfrt / MAX(max_vfs, 1);
+ }
+
+ if (pci_is_vf(&n->parent_obj)) {
+ cap->viprt = cpu_to_le16(n->conf_msix_qsize);
+ } else {
+ cap->viprt = cpu_to_le16(n->params.msix_qsize -
+ n->params.sriov_vi_flexible);
+ cap->vifrt = cpu_to_le32(n->params.sriov_vi_flexible);
+ cap->virfap = cap->vifrt;
+ cap->vigran = cpu_to_le16(NVME_VF_RES_GRANULARITY);
+ cap->vifrsm = n->params.sriov_max_vi_per_vf ?
+ cpu_to_le16(n->params.sriov_max_vi_per_vf) :
+ cap->vifrt / MAX(max_vfs, 1);
+ }
}
static void nvme_init_cmb(NvmeCtrl *n, PCIDevice *pci_dev)
@@ -6756,11 +6867,14 @@ static uint64_t nvme_bar_size(unsigned total_queues, unsigned total_irqs,
return bar_size;
}
-static void nvme_init_sriov(NvmeCtrl *n, PCIDevice *pci_dev, uint16_t offset,
- uint64_t bar_size)
+static void nvme_init_sriov(NvmeCtrl *n, PCIDevice *pci_dev, uint16_t offset)
{
uint16_t vf_dev_id = n->params.use_intel_id ?
PCI_DEVICE_ID_INTEL_NVME : PCI_DEVICE_ID_REDHAT_NVME;
+ NvmePriCtrlCap *cap = &n->pri_ctrl_cap;
+ uint64_t bar_size = nvme_bar_size(le16_to_cpu(cap->vqfrsm),
+ le16_to_cpu(cap->vifrsm),
+ NULL, NULL);
pcie_sriov_pf_init(pci_dev, offset, "nvme", vf_dev_id,
n->params.sriov_max_vfs, n->params.sriov_max_vfs,
@@ -6858,7 +6972,7 @@ static int nvme_init_pci(NvmeCtrl *n, PCIDevice *pci_dev, Error **errp)
}
if (!pci_is_vf(pci_dev) && n->params.sriov_max_vfs) {
- nvme_init_sriov(n, pci_dev, 0x120, bar_size);
+ nvme_init_sriov(n, pci_dev, 0x120);
}
return 0;
@@ -6882,6 +6996,7 @@ static void nvme_init_ctrl(NvmeCtrl *n, PCIDevice *pci_dev)
NvmeIdCtrl *id = &n->id_ctrl;
uint8_t *pci_conf = pci_dev->config;
uint64_t cap = ldq_le_p(&n->bar.cap);
+ NvmeSecCtrlEntry *sctrl = nvme_sctrl(n);
id->vid = cpu_to_le16(pci_get_word(pci_conf + PCI_VENDOR_ID));
id->ssvid = cpu_to_le16(pci_get_word(pci_conf + PCI_SUBSYSTEM_VENDOR_ID));
@@ -6974,6 +7089,10 @@ static void nvme_init_ctrl(NvmeCtrl *n, PCIDevice *pci_dev)
stl_le_p(&n->bar.vs, NVME_SPEC_VER);
n->bar.intmc = n->bar.intms = 0;
+
+ if (pci_is_vf(&n->parent_obj) && !sctrl->scs) {
+ stl_le_p(&n->bar.csts, NVME_CSTS_FAILED);
+ }
}
static int nvme_init_subsys(NvmeCtrl *n, Error **errp)
@@ -7114,6 +7233,14 @@ static Property nvme_props[] = {
DEFINE_PROP_BOOL("zoned.auto_transition", NvmeCtrl,
params.auto_transition_zones, true),
DEFINE_PROP_UINT8("sriov_max_vfs", NvmeCtrl, params.sriov_max_vfs, 0),
+ DEFINE_PROP_UINT16("sriov_vq_flexible", NvmeCtrl,
+ params.sriov_vq_flexible, 0),
+ DEFINE_PROP_UINT16("sriov_vi_flexible", NvmeCtrl,
+ params.sriov_vi_flexible, 0),
+ DEFINE_PROP_UINT8("sriov_max_vi_per_vf", NvmeCtrl,
+ params.sriov_max_vi_per_vf, 0),
+ DEFINE_PROP_UINT8("sriov_max_vq_per_vf", NvmeCtrl,
+ params.sriov_max_vq_per_vf, 0),
DEFINE_PROP_END_OF_LIST(),
};
diff --git a/hw/nvme/nvme.h b/hw/nvme/nvme.h
index adde718105b..fb18d1dc667 100644
--- a/hw/nvme/nvme.h
+++ b/hw/nvme/nvme.h
@@ -411,6 +411,10 @@ typedef struct NvmeParams {
bool auto_transition_zones;
bool legacy_cmb;
uint8_t sriov_max_vfs;
+ uint16_t sriov_vq_flexible;
+ uint16_t sriov_vi_flexible;
+ uint8_t sriov_max_vq_per_vf;
+ uint8_t sriov_max_vi_per_vf;
} NvmeParams;
typedef struct NvmeCtrl {
diff --git a/include/block/nvme.h b/include/block/nvme.h
index 94efd32578c..58d08d5c2aa 100644
--- a/include/block/nvme.h
+++ b/include/block/nvme.h
@@ -1576,6 +1576,11 @@ typedef struct QEMU_PACKED NvmePriCtrlCap {
uint8_t rsvd80[4016];
} NvmePriCtrlCap;
+typedef enum NvmePriCtrlCapCrt {
+ NVME_CRT_VQ = 1 << 0,
+ NVME_CRT_VI = 1 << 1,
+} NvmePriCtrlCapCrt;
+
typedef struct QEMU_PACKED NvmeSecCtrlEntry {
uint16_t scid;
uint16_t pcid;
--
2.25.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v7 09/12] hw/nvme: Add support for the Virtualization Management command
2022-03-18 19:18 [PATCH v7 00/12] hw/nvme: SR-IOV with Virtualization Enhancements Lukasz Maniak
` (7 preceding siblings ...)
2022-03-18 19:18 ` [PATCH v7 08/12] hw/nvme: Initialize capability structures for primary/secondary controllers Lukasz Maniak
@ 2022-03-18 19:18 ` Lukasz Maniak
2022-03-18 19:18 ` [PATCH v7 10/12] docs: Add documentation for SR-IOV and Virtualization Enhancements Lukasz Maniak
` (4 subsequent siblings)
13 siblings, 0 replies; 21+ messages in thread
From: Lukasz Maniak @ 2022-03-18 19:18 UTC (permalink / raw)
To: qemu-devel
Cc: fam, kwolf, lukasz.maniak, stefanha, qemu-block, mst, k.jensen,
armbru, f4bug, kbusch, its, hreitz, xypron.glpk, lukasz.gieryk,
ani, imammedo
From: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
With the new command one can:
- assign flexible resources (queues, interrupts) to primary and
secondary controllers,
- toggle the online/offline state of given controller.
Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
---
hw/nvme/ctrl.c | 257 ++++++++++++++++++++++++++++++++++++++++++-
hw/nvme/nvme.h | 20 ++++
hw/nvme/trace-events | 3 +
include/block/nvme.h | 17 +++
4 files changed, 295 insertions(+), 2 deletions(-)
diff --git a/hw/nvme/ctrl.c b/hw/nvme/ctrl.c
index 011231ab5a6..247c09882dd 100644
--- a/hw/nvme/ctrl.c
+++ b/hw/nvme/ctrl.c
@@ -188,6 +188,7 @@
#include "qemu/error-report.h"
#include "qemu/log.h"
#include "qemu/units.h"
+#include "qemu/range.h"
#include "qapi/error.h"
#include "qapi/visitor.h"
#include "sysemu/sysemu.h"
@@ -262,6 +263,7 @@ static const uint32_t nvme_cse_acs[256] = {
[NVME_ADM_CMD_GET_FEATURES] = NVME_CMD_EFF_CSUPP,
[NVME_ADM_CMD_ASYNC_EV_REQ] = NVME_CMD_EFF_CSUPP,
[NVME_ADM_CMD_NS_ATTACHMENT] = NVME_CMD_EFF_CSUPP | NVME_CMD_EFF_NIC,
+ [NVME_ADM_CMD_VIRT_MNGMT] = NVME_CMD_EFF_CSUPP,
[NVME_ADM_CMD_FORMAT_NVM] = NVME_CMD_EFF_CSUPP | NVME_CMD_EFF_LBCC,
};
@@ -293,6 +295,7 @@ static const uint32_t nvme_cse_iocs_zoned[256] = {
};
static void nvme_process_sq(void *opaque);
+static void nvme_ctrl_reset(NvmeCtrl *n, NvmeResetType rst);
static uint16_t nvme_sqid(NvmeRequest *req)
{
@@ -5838,6 +5841,167 @@ out:
return status;
}
+static void nvme_get_virt_res_num(NvmeCtrl *n, uint8_t rt, int *num_total,
+ int *num_prim, int *num_sec)
+{
+ *num_total = le32_to_cpu(rt ?
+ n->pri_ctrl_cap.vifrt : n->pri_ctrl_cap.vqfrt);
+ *num_prim = le16_to_cpu(rt ?
+ n->pri_ctrl_cap.virfap : n->pri_ctrl_cap.vqrfap);
+ *num_sec = le16_to_cpu(rt ? n->pri_ctrl_cap.virfa : n->pri_ctrl_cap.vqrfa);
+}
+
+static uint16_t nvme_assign_virt_res_to_prim(NvmeCtrl *n, NvmeRequest *req,
+ uint16_t cntlid, uint8_t rt,
+ int nr)
+{
+ int num_total, num_prim, num_sec;
+
+ if (cntlid != n->cntlid) {
+ return NVME_INVALID_CTRL_ID | NVME_DNR;
+ }
+
+ nvme_get_virt_res_num(n, rt, &num_total, &num_prim, &num_sec);
+
+ if (nr > num_total) {
+ return NVME_INVALID_NUM_RESOURCES | NVME_DNR;
+ }
+
+ if (nr > num_total - num_sec) {
+ return NVME_INVALID_RESOURCE_ID | NVME_DNR;
+ }
+
+ if (rt) {
+ n->next_pri_ctrl_cap.virfap = cpu_to_le16(nr);
+ } else {
+ n->next_pri_ctrl_cap.vqrfap = cpu_to_le16(nr);
+ }
+
+ req->cqe.result = cpu_to_le32(nr);
+ return req->status;
+}
+
+static void nvme_update_virt_res(NvmeCtrl *n, NvmeSecCtrlEntry *sctrl,
+ uint8_t rt, int nr)
+{
+ int prev_nr, prev_total;
+
+ if (rt) {
+ prev_nr = le16_to_cpu(sctrl->nvi);
+ prev_total = le32_to_cpu(n->pri_ctrl_cap.virfa);
+ sctrl->nvi = cpu_to_le16(nr);
+ n->pri_ctrl_cap.virfa = cpu_to_le32(prev_total + nr - prev_nr);
+ } else {
+ prev_nr = le16_to_cpu(sctrl->nvq);
+ prev_total = le32_to_cpu(n->pri_ctrl_cap.vqrfa);
+ sctrl->nvq = cpu_to_le16(nr);
+ n->pri_ctrl_cap.vqrfa = cpu_to_le32(prev_total + nr - prev_nr);
+ }
+}
+
+static uint16_t nvme_assign_virt_res_to_sec(NvmeCtrl *n, NvmeRequest *req,
+ uint16_t cntlid, uint8_t rt, int nr)
+{
+ int num_total, num_prim, num_sec, num_free, diff, limit;
+ NvmeSecCtrlEntry *sctrl;
+
+ sctrl = nvme_sctrl_for_cntlid(n, cntlid);
+ if (!sctrl) {
+ return NVME_INVALID_CTRL_ID | NVME_DNR;
+ }
+
+ if (sctrl->scs) {
+ return NVME_INVALID_SEC_CTRL_STATE | NVME_DNR;
+ }
+
+ limit = le16_to_cpu(rt ? n->pri_ctrl_cap.vifrsm : n->pri_ctrl_cap.vqfrsm);
+ if (nr > limit) {
+ return NVME_INVALID_NUM_RESOURCES | NVME_DNR;
+ }
+
+ nvme_get_virt_res_num(n, rt, &num_total, &num_prim, &num_sec);
+ num_free = num_total - num_prim - num_sec;
+ diff = nr - le16_to_cpu(rt ? sctrl->nvi : sctrl->nvq);
+
+ if (diff > num_free) {
+ return NVME_INVALID_RESOURCE_ID | NVME_DNR;
+ }
+
+ nvme_update_virt_res(n, sctrl, rt, nr);
+ req->cqe.result = cpu_to_le32(nr);
+
+ return req->status;
+}
+
+static uint16_t nvme_virt_set_state(NvmeCtrl *n, uint16_t cntlid, bool online)
+{
+ NvmeCtrl *sn = NULL;
+ NvmeSecCtrlEntry *sctrl;
+ int vf_index;
+
+ sctrl = nvme_sctrl_for_cntlid(n, cntlid);
+ if (!sctrl) {
+ return NVME_INVALID_CTRL_ID | NVME_DNR;
+ }
+
+ if (!pci_is_vf(&n->parent_obj)) {
+ vf_index = le16_to_cpu(sctrl->vfn) - 1;
+ sn = NVME(pcie_sriov_get_vf_at_index(&n->parent_obj, vf_index));
+ }
+
+ if (online) {
+ if (!sctrl->nvi || (le16_to_cpu(sctrl->nvq) < 2) || !sn) {
+ return NVME_INVALID_SEC_CTRL_STATE | NVME_DNR;
+ }
+
+ if (!sctrl->scs) {
+ sctrl->scs = 0x1;
+ nvme_ctrl_reset(sn, NVME_RESET_FUNCTION);
+ }
+ } else {
+ nvme_update_virt_res(n, sctrl, NVME_VIRT_RES_INTERRUPT, 0);
+ nvme_update_virt_res(n, sctrl, NVME_VIRT_RES_QUEUE, 0);
+
+ if (sctrl->scs) {
+ sctrl->scs = 0x0;
+ if (sn) {
+ nvme_ctrl_reset(sn, NVME_RESET_FUNCTION);
+ }
+ }
+ }
+
+ return NVME_SUCCESS;
+}
+
+static uint16_t nvme_virt_mngmt(NvmeCtrl *n, NvmeRequest *req)
+{
+ uint32_t dw10 = le32_to_cpu(req->cmd.cdw10);
+ uint32_t dw11 = le32_to_cpu(req->cmd.cdw11);
+ uint8_t act = dw10 & 0xf;
+ uint8_t rt = (dw10 >> 8) & 0x7;
+ uint16_t cntlid = (dw10 >> 16) & 0xffff;
+ int nr = dw11 & 0xffff;
+
+ trace_pci_nvme_virt_mngmt(nvme_cid(req), act, cntlid, rt ? "VI" : "VQ", nr);
+
+ if (rt != NVME_VIRT_RES_QUEUE && rt != NVME_VIRT_RES_INTERRUPT) {
+ return NVME_INVALID_RESOURCE_ID | NVME_DNR;
+ }
+
+ switch (act) {
+ case NVME_VIRT_MNGMT_ACTION_SEC_ASSIGN:
+ return nvme_assign_virt_res_to_sec(n, req, cntlid, rt, nr);
+ case NVME_VIRT_MNGMT_ACTION_PRM_ALLOC:
+ return nvme_assign_virt_res_to_prim(n, req, cntlid, rt, nr);
+ case NVME_VIRT_MNGMT_ACTION_SEC_ONLINE:
+ return nvme_virt_set_state(n, cntlid, true);
+ case NVME_VIRT_MNGMT_ACTION_SEC_OFFLINE:
+ return nvme_virt_set_state(n, cntlid, false);
+ default:
+ return NVME_INVALID_FIELD | NVME_DNR;
+ }
+}
+
static uint16_t nvme_admin_cmd(NvmeCtrl *n, NvmeRequest *req)
{
trace_pci_nvme_admin_cmd(nvme_cid(req), nvme_sqid(req), req->cmd.opcode,
@@ -5880,6 +6044,8 @@ static uint16_t nvme_admin_cmd(NvmeCtrl *n, NvmeRequest *req)
return nvme_aer(n, req);
case NVME_ADM_CMD_NS_ATTACHMENT:
return nvme_ns_attachment(n, req);
+ case NVME_ADM_CMD_VIRT_MNGMT:
+ return nvme_virt_mngmt(n, req);
case NVME_ADM_CMD_FORMAT_NVM:
return nvme_format(n, req);
default:
@@ -5941,9 +6107,33 @@ static void nvme_update_msixcap_ts(PCIDevice *pci_dev, uint32_t table_size)
table_size - 1);
}
+static void nvme_activate_virt_res(NvmeCtrl *n)
+{
+ PCIDevice *pci_dev = &n->parent_obj;
+ NvmePriCtrlCap *cap = &n->pri_ctrl_cap;
+ NvmeSecCtrlEntry *sctrl;
+
+ /* -1 to account for the admin queue */
+ if (pci_is_vf(pci_dev)) {
+ sctrl = nvme_sctrl(n);
+ cap->vqprt = sctrl->nvq;
+ cap->viprt = sctrl->nvi;
+ n->conf_ioqpairs = sctrl->nvq ? le16_to_cpu(sctrl->nvq) - 1 : 0;
+ n->conf_msix_qsize = sctrl->nvi ? le16_to_cpu(sctrl->nvi) : 1;
+ } else {
+ cap->vqrfap = n->next_pri_ctrl_cap.vqrfap;
+ cap->virfap = n->next_pri_ctrl_cap.virfap;
+ n->conf_ioqpairs = le16_to_cpu(cap->vqprt) +
+ le16_to_cpu(cap->vqrfap) - 1;
+ n->conf_msix_qsize = le16_to_cpu(cap->viprt) +
+ le16_to_cpu(cap->virfap);
+ }
+}
+
static void nvme_ctrl_reset(NvmeCtrl *n, NvmeResetType rst)
{
PCIDevice *pci_dev = &n->parent_obj;
+ NvmeSecCtrlEntry *sctrl;
NvmeNamespace *ns;
int i;
@@ -5973,9 +6163,20 @@ static void nvme_ctrl_reset(NvmeCtrl *n, NvmeResetType rst)
g_free(event);
}
- if (!pci_is_vf(pci_dev) && n->params.sriov_max_vfs) {
+ if (n->params.sriov_max_vfs) {
+ if (!pci_is_vf(pci_dev)) {
+ for (i = 0; i < n->sec_ctrl_list.numcntl; i++) {
+ sctrl = &n->sec_ctrl_list.sec[i];
+ nvme_virt_set_state(n, le16_to_cpu(sctrl->scid), false);
+ }
+
+ if (rst != NVME_RESET_CONTROLLER) {
+ pcie_sriov_pf_disable_vfs(pci_dev);
+ }
+ }
+
if (rst != NVME_RESET_CONTROLLER) {
- pcie_sriov_pf_disable_vfs(pci_dev);
+ nvme_activate_virt_res(n);
}
}
@@ -5984,6 +6185,13 @@ static void nvme_ctrl_reset(NvmeCtrl *n, NvmeResetType rst)
n->qs_created = false;
nvme_update_msixcap_ts(pci_dev, n->conf_msix_qsize);
+
+ if (pci_is_vf(pci_dev)) {
+ sctrl = nvme_sctrl(n);
+ stl_le_p(&n->bar.csts, sctrl->scs ? 0 : NVME_CSTS_FAILED);
+ } else {
+ stl_le_p(&n->bar.csts, 0);
+ }
}
static void nvme_ctrl_shutdown(NvmeCtrl *n)
@@ -6029,7 +6237,15 @@ static int nvme_start_ctrl(NvmeCtrl *n)
uint64_t acq = ldq_le_p(&n->bar.acq);
uint32_t page_bits = NVME_CC_MPS(cc) + 12;
uint32_t page_size = 1 << page_bits;
+ NvmeSecCtrlEntry *sctrl = nvme_sctrl(n);
+ if (pci_is_vf(&n->parent_obj) && !sctrl->scs) {
+ trace_pci_nvme_err_startfail_virt_state(le16_to_cpu(sctrl->nvi),
+ le16_to_cpu(sctrl->nvq),
+ sctrl->scs ? "ONLINE" :
+ "OFFLINE");
+ return -1;
+ }
if (unlikely(n->cq[0])) {
trace_pci_nvme_err_startfail_cq();
return -1;
@@ -6412,6 +6628,12 @@ static uint64_t nvme_mmio_read(void *opaque, hwaddr addr, unsigned size)
return 0;
}
+ if (pci_is_vf(&n->parent_obj) && !nvme_sctrl(n)->scs &&
+ addr != NVME_REG_CSTS) {
+ trace_pci_nvme_err_ignored_mmio_vf_offline(addr, size);
+ return 0;
+ }
+
/*
* When PMRWBM bit 1 is set then read from
* from PMRSTS should ensure prior writes
@@ -6561,6 +6783,12 @@ static void nvme_mmio_write(void *opaque, hwaddr addr, uint64_t data,
trace_pci_nvme_mmio_write(addr, data, size);
+ if (pci_is_vf(&n->parent_obj) && !nvme_sctrl(n)->scs &&
+ addr != NVME_REG_CSTS) {
+ trace_pci_nvme_err_ignored_mmio_vf_offline(addr, size);
+ return;
+ }
+
if (addr < sizeof(n->bar)) {
nvme_write_bar(n, addr, data, size);
} else {
@@ -7295,9 +7523,34 @@ static void nvme_pci_reset(DeviceState *qdev)
nvme_ctrl_reset(n, NVME_RESET_FUNCTION);
}
+static void nvme_sriov_pre_write_ctrl(PCIDevice *dev, uint32_t address,
+ uint32_t val, int len)
+{
+ NvmeCtrl *n = NVME(dev);
+ NvmeSecCtrlEntry *sctrl;
+ uint16_t sriov_cap = dev->exp.sriov_cap;
+ uint32_t off = address - sriov_cap;
+ int i, num_vfs;
+
+ if (!sriov_cap) {
+ return;
+ }
+
+ if (range_covers_byte(off, len, PCI_SRIOV_CTRL)) {
+ if (!(val & PCI_SRIOV_CTRL_VFE)) {
+ num_vfs = pci_get_word(dev->config + sriov_cap + PCI_SRIOV_NUM_VF);
+ for (i = 0; i < num_vfs; i++) {
+ sctrl = &n->sec_ctrl_list.sec[i];
+ nvme_virt_set_state(n, le16_to_cpu(sctrl->scid), false);
+ }
+ }
+ }
+}
+
static void nvme_pci_write_config(PCIDevice *dev, uint32_t address,
uint32_t val, int len)
{
+ nvme_sriov_pre_write_ctrl(dev, address, val, len);
pci_default_write_config(dev, address, val, len);
pcie_cap_flr_write_config(dev, address, val, len);
}
diff --git a/hw/nvme/nvme.h b/hw/nvme/nvme.h
index fb18d1dc667..38f365da84a 100644
--- a/hw/nvme/nvme.h
+++ b/hw/nvme/nvme.h
@@ -339,6 +339,7 @@ static inline const char *nvme_adm_opc_str(uint8_t opc)
case NVME_ADM_CMD_GET_FEATURES: return "NVME_ADM_CMD_GET_FEATURES";
case NVME_ADM_CMD_ASYNC_EV_REQ: return "NVME_ADM_CMD_ASYNC_EV_REQ";
case NVME_ADM_CMD_NS_ATTACHMENT: return "NVME_ADM_CMD_NS_ATTACHMENT";
+ case NVME_ADM_CMD_VIRT_MNGMT: return "NVME_ADM_CMD_VIRT_MNGMT";
case NVME_ADM_CMD_FORMAT_NVM: return "NVME_ADM_CMD_FORMAT_NVM";
default: return "NVME_ADM_CMD_UNKNOWN";
}
@@ -490,6 +491,10 @@ typedef struct NvmeCtrl {
NvmePriCtrlCap pri_ctrl_cap;
NvmeSecCtrlList sec_ctrl_list;
+ struct {
+ uint16_t vqrfap;
+ uint16_t virfap;
+ } next_pri_ctrl_cap; /* These override pri_ctrl_cap after reset */
} NvmeCtrl;
typedef enum NvmeResetType {
@@ -541,6 +546,21 @@ static inline NvmeSecCtrlEntry *nvme_sctrl(NvmeCtrl *n)
return NULL;
}
+static inline NvmeSecCtrlEntry *nvme_sctrl_for_cntlid(NvmeCtrl *n,
+ uint16_t cntlid)
+{
+ NvmeSecCtrlList *list = &n->sec_ctrl_list;
+ uint8_t i;
+
+ for (i = 0; i < list->numcntl; i++) {
+ if (le16_to_cpu(list->sec[i].scid) == cntlid) {
+ return &list->sec[i];
+ }
+ }
+
+ return NULL;
+}
+
void nvme_attach_ns(NvmeCtrl *n, NvmeNamespace *ns);
uint16_t nvme_bounce_data(NvmeCtrl *n, void *ptr, uint32_t len,
NvmeTxDirection dir, NvmeRequest *req);
diff --git a/hw/nvme/trace-events b/hw/nvme/trace-events
index b07864c5732..065e1c891df 100644
--- a/hw/nvme/trace-events
+++ b/hw/nvme/trace-events
@@ -111,6 +111,7 @@ pci_nvme_clear_ns_close(uint32_t state, uint64_t slba) "zone state=%"PRIu32", sl
pci_nvme_clear_ns_reset(uint32_t state, uint64_t slba) "zone state=%"PRIu32", slba=%"PRIu64" transitioned to Empty state"
pci_nvme_zoned_zrwa_implicit_flush(uint64_t zslba, uint32_t nlb) "zslba 0x%"PRIx64" nlb %"PRIu32""
pci_nvme_pci_reset(void) "PCI Function Level Reset"
+pci_nvme_virt_mngmt(uint16_t cid, uint16_t act, uint16_t cntlid, const char* rt, uint16_t nr) "cid %"PRIu16", act=0x%"PRIx16", ctrlid=%"PRIu16" %s nr=%"PRIu16""
# error conditions
pci_nvme_err_mdts(size_t len) "len %zu"
@@ -180,7 +181,9 @@ pci_nvme_err_startfail_asqent_sz_zero(void) "nvme_start_ctrl failed because the
pci_nvme_err_startfail_acqent_sz_zero(void) "nvme_start_ctrl failed because the admin completion queue size is zero"
pci_nvme_err_startfail_zasl_too_small(uint32_t zasl, uint32_t pagesz) "nvme_start_ctrl failed because zone append size limit %"PRIu32" is too small, needs to be >= %"PRIu32""
pci_nvme_err_startfail(void) "setting controller enable bit failed"
+pci_nvme_err_startfail_virt_state(uint16_t vq, uint16_t vi, const char *state) "nvme_start_ctrl failed due to ctrl state: vi=%u vq=%u %s"
pci_nvme_err_invalid_mgmt_action(uint8_t action) "action=0x%"PRIx8""
+pci_nvme_err_ignored_mmio_vf_offline(uint64_t addr, unsigned size) "addr 0x%"PRIx64" size %d"
# undefined behavior
pci_nvme_ub_mmiowr_misaligned32(uint64_t offset) "MMIO write not 32-bit aligned, offset=0x%"PRIx64""
diff --git a/include/block/nvme.h b/include/block/nvme.h
index 58d08d5c2aa..373c70b5ca7 100644
--- a/include/block/nvme.h
+++ b/include/block/nvme.h
@@ -595,6 +595,7 @@ enum NvmeAdminCommands {
NVME_ADM_CMD_ACTIVATE_FW = 0x10,
NVME_ADM_CMD_DOWNLOAD_FW = 0x11,
NVME_ADM_CMD_NS_ATTACHMENT = 0x15,
+ NVME_ADM_CMD_VIRT_MNGMT = 0x1c,
NVME_ADM_CMD_FORMAT_NVM = 0x80,
NVME_ADM_CMD_SECURITY_SEND = 0x81,
NVME_ADM_CMD_SECURITY_RECV = 0x82,
@@ -899,6 +900,10 @@ enum NvmeStatusCodes {
NVME_NS_PRIVATE = 0x0119,
NVME_NS_NOT_ATTACHED = 0x011a,
NVME_NS_CTRL_LIST_INVALID = 0x011c,
+ NVME_INVALID_CTRL_ID = 0x011f,
+ NVME_INVALID_SEC_CTRL_STATE = 0x0120,
+ NVME_INVALID_NUM_RESOURCES = 0x0121,
+ NVME_INVALID_RESOURCE_ID = 0x0122,
NVME_CONFLICTING_ATTRS = 0x0180,
NVME_INVALID_PROT_INFO = 0x0181,
NVME_WRITE_TO_RO = 0x0182,
@@ -1598,6 +1603,18 @@ typedef struct QEMU_PACKED NvmeSecCtrlList {
NvmeSecCtrlEntry sec[127];
} NvmeSecCtrlList;
+typedef enum NvmeVirtMngmtAction {
+ NVME_VIRT_MNGMT_ACTION_PRM_ALLOC = 0x01,
+ NVME_VIRT_MNGMT_ACTION_SEC_OFFLINE = 0x07,
+ NVME_VIRT_MNGMT_ACTION_SEC_ASSIGN = 0x08,
+ NVME_VIRT_MNGMT_ACTION_SEC_ONLINE = 0x09,
+} NvmeVirtMngmtAction;
+
+typedef enum NvmeVirtualResourceType {
+ NVME_VIRT_RES_QUEUE = 0x00,
+ NVME_VIRT_RES_INTERRUPT = 0x01,
+} NvmeVirtualResourceType;
+
static inline void _nvme_check_size(void)
{
QEMU_BUILD_BUG_ON(sizeof(NvmeBar) != 4096);
--
2.25.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v7 10/12] docs: Add documentation for SR-IOV and Virtualization Enhancements
2022-03-18 19:18 [PATCH v7 00/12] hw/nvme: SR-IOV with Virtualization Enhancements Lukasz Maniak
` (8 preceding siblings ...)
2022-03-18 19:18 ` [PATCH v7 09/12] hw/nvme: Add support for the Virtualization Management command Lukasz Maniak
@ 2022-03-18 19:18 ` Lukasz Maniak
2022-03-18 19:18 ` [PATCH v7 11/12] hw/nvme: Update the initalization place for the AER queue Lukasz Maniak
` (3 subsequent siblings)
13 siblings, 0 replies; 21+ messages in thread
From: Lukasz Maniak @ 2022-03-18 19:18 UTC (permalink / raw)
To: qemu-devel
Cc: fam, kwolf, Thomas Huth, lukasz.maniak, stefanha, qemu-block,
mst, k.jensen, armbru, f4bug, kbusch, its, hreitz, xypron.glpk,
lukasz.gieryk, ani, imammedo
Signed-off-by: Lukasz Maniak <lukasz.maniak@linux.intel.com>
---
docs/system/devices/nvme.rst | 82 ++++++++++++++++++++++++++++++++++++
1 file changed, 82 insertions(+)
diff --git a/docs/system/devices/nvme.rst b/docs/system/devices/nvme.rst
index b5acb2a9c19..aba253304e4 100644
--- a/docs/system/devices/nvme.rst
+++ b/docs/system/devices/nvme.rst
@@ -239,3 +239,85 @@ The virtual namespace device supports DIF- and DIX-based protection information
to ``1`` to transfer protection information as the first eight bytes of
metadata. Otherwise, the protection information is transferred as the last
eight bytes.
+
+Virtualization Enhancements and SR-IOV (Experimental Support)
+-------------------------------------------------------------
+
+The ``nvme`` device supports Single Root I/O Virtualization and Sharing
+along with Virtualization Enhancements. The controller has to be linked to
+an NVM Subsystem device (``nvme-subsys``) for use with SR-IOV.
+
+A number of parameters are present (**please note, that they may be
+subject to change**):
+
+``sriov_max_vfs`` (default: ``0``)
+ Indicates the maximum number of PCIe virtual functions supported
+ by the controller. Specifying a non-zero value enables reporting of both
+ SR-IOV and ARI (Alternative Routing-ID Interpretation) capabilities
+ by the NVMe device. Virtual function controllers will not report SR-IOV.
+
+``sriov_vq_flexible``
+ Indicates the total number of flexible queue resources assignable to all
+ the secondary controllers. Implicitly sets the number of primary
+ controller's private resources to ``(max_ioqpairs - sriov_vq_flexible)``.
+
+``sriov_vi_flexible``
+ Indicates the total number of flexible interrupt resources assignable to
+ all the secondary controllers. Implicitly sets the number of primary
+ controller's private resources to ``(msix_qsize - sriov_vi_flexible)``.
+
+``sriov_max_vi_per_vf`` (default: ``0``)
+ Indicates the maximum number of virtual interrupt resources assignable
+ to a secondary controller. The default ``0`` resolves to
+ ``(sriov_vi_flexible / sriov_max_vfs)``
+
+``sriov_max_vq_per_vf`` (default: ``0``)
+ Indicates the maximum number of virtual queue resources assignable to
+ a secondary controller. The default ``0`` resolves to
+ ``(sriov_vq_flexible / sriov_max_vfs)``
+
+The simplest possible invocation enables the capability to set up one VF
+controller and assign an admin queue, an IO queue, and a MSI-X interrupt.
+
+.. code-block:: console
+
+ -device nvme-subsys,id=subsys0
+ -device nvme,serial=deadbeef,subsys=subsys0,sriov_max_vfs=1,
+ sriov_vq_flexible=2,sriov_vi_flexible=1
+
+The minimum steps required to configure a functional NVMe secondary
+controller are:
+
+ * unbind flexible resources from the primary controller
+
+.. code-block:: console
+
+ nvme virt-mgmt /dev/nvme0 -c 0 -r 1 -a 1 -n 0
+ nvme virt-mgmt /dev/nvme0 -c 0 -r 0 -a 1 -n 0
+
+ * perform a Function Level Reset on the primary controller to actually
+ release the resources
+
+.. code-block:: console
+
+ echo 1 > /sys/bus/pci/devices/0000:01:00.0/reset
+
+ * enable VF
+
+.. code-block:: console
+
+ echo 1 > /sys/bus/pci/devices/0000:01:00.0/sriov_numvfs
+
+ * assign the flexible resources to the VF and set it ONLINE
+
+.. code-block:: console
+
+ nvme virt-mgmt /dev/nvme0 -c 1 -r 1 -a 8 -n 1
+ nvme virt-mgmt /dev/nvme0 -c 1 -r 0 -a 8 -n 2
+ nvme virt-mgmt /dev/nvme0 -c 1 -r 0 -a 9 -n 0
+
+ * bind the NVMe driver to the VF
+
+.. code-block:: console
+
+ echo 0000:01:00.1 > /sys/bus/pci/drivers/nvme/bind
\ No newline at end of file
--
2.25.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v7 11/12] hw/nvme: Update the initalization place for the AER queue
2022-03-18 19:18 [PATCH v7 00/12] hw/nvme: SR-IOV with Virtualization Enhancements Lukasz Maniak
` (9 preceding siblings ...)
2022-03-18 19:18 ` [PATCH v7 10/12] docs: Add documentation for SR-IOV and Virtualization Enhancements Lukasz Maniak
@ 2022-03-18 19:18 ` Lukasz Maniak
2022-03-18 19:18 ` [PATCH v7 12/12] hw/acpi: Make the PCI hot-plug aware of SR-IOV Lukasz Maniak
` (2 subsequent siblings)
13 siblings, 0 replies; 21+ messages in thread
From: Lukasz Maniak @ 2022-03-18 19:18 UTC (permalink / raw)
To: qemu-devel
Cc: fam, kwolf, lukasz.maniak, stefanha, qemu-block, mst, k.jensen,
armbru, f4bug, kbusch, its, hreitz, xypron.glpk, lukasz.gieryk,
ani, imammedo
From: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
This patch updates the initialization place for the AER queue, so it’s
initialized once, at controller initialization, and not every time
controller is enabled.
While the original version works for a non-SR-IOV device, as it’s hard
to interact with the controller if it’s not enabled, the multiple
reinitialization is not necessarily correct.
With the SR/IOV feature enabled a segfault can happen: a VF can have its
controller disabled, while a namespace can still be attached to the
controller through the parent PF. An event generated in such case ends
up on an uninitialized queue.
While it’s an interesting question whether a VF should support AER in
the first place, I don’t think it must be answered today.
Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
---
hw/nvme/ctrl.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/hw/nvme/ctrl.c b/hw/nvme/ctrl.c
index 247c09882dd..b0862b1d96c 100644
--- a/hw/nvme/ctrl.c
+++ b/hw/nvme/ctrl.c
@@ -6326,8 +6326,6 @@ static int nvme_start_ctrl(NvmeCtrl *n)
nvme_set_timestamp(n, 0ULL);
- QTAILQ_INIT(&n->aer_queue);
-
nvme_select_iocs(n);
return 0;
@@ -6987,6 +6985,7 @@ static void nvme_init_state(NvmeCtrl *n)
n->features.temp_thresh_hi = NVME_TEMPERATURE_WARNING;
n->starttime_ms = qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL);
n->aer_reqs = g_new0(NvmeRequest *, n->params.aerl + 1);
+ QTAILQ_INIT(&n->aer_queue);
list->numcntl = cpu_to_le16(max_vfs);
for (i = 0; i < max_vfs; i++) {
--
2.25.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* [PATCH v7 12/12] hw/acpi: Make the PCI hot-plug aware of SR-IOV
2022-03-18 19:18 [PATCH v7 00/12] hw/nvme: SR-IOV with Virtualization Enhancements Lukasz Maniak
` (10 preceding siblings ...)
2022-03-18 19:18 ` [PATCH v7 11/12] hw/nvme: Update the initalization place for the AER queue Lukasz Maniak
@ 2022-03-18 19:18 ` Lukasz Maniak
2022-03-31 12:38 ` Igor Mammedov
2022-04-20 11:59 ` Michael S. Tsirkin
2022-04-20 12:02 ` [PATCH v7 00/12] hw/nvme: SR-IOV with Virtualization Enhancements Michael S. Tsirkin
2022-04-28 19:56 ` Klaus Jensen
13 siblings, 2 replies; 21+ messages in thread
From: Lukasz Maniak @ 2022-03-18 19:18 UTC (permalink / raw)
To: qemu-devel
Cc: fam, kwolf, lukasz.maniak, stefanha, qemu-block, mst, k.jensen,
armbru, f4bug, kbusch, its, hreitz, xypron.glpk, lukasz.gieryk,
ani, imammedo
From: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
PCI device capable of SR-IOV support is a new, still-experimental
feature with only a single working example of the Nvme device.
This patch in an attempt to fix a double-free problem when a
SR-IOV-capable Nvme device is hot-unplugged. The problem and the
reproduction steps can be found in this thread:
https://patchew.org/QEMU/20220217174504.1051716-1-lukasz.maniak@linux.intel.com/20220217174504.1051716-14-lukasz.maniak@linux.intel.com/
Details of the proposed solution are, for convenience, included below.
1) The current SR-IOV implementation assumes it’s the PhysicalFunction
that creates and deletes VirtualFunctions.
2) It’s a design decision (the Nvme device at least) for the VFs to be
of the same class as PF. Effectively, they share the dc->hotpluggable
value.
3) When a VF is created, it’s added as a child node to PF’s PCI bus
slot.
4) Monitor/device_del triggers the ACPI mechanism. The implementation is
not aware of SR/IOV and ejects PF’s PCI slot, directly unrealizing all
hot-pluggable (!acpi_pcihp_pc_no_hotplug) children nodes.
5) VFs are unrealized directly, and it doesn’t work well with (1).
SR/IOV structures are not updated, so when it’s PF’s turn to be
unrealized, it works on stale pointers to already-deleted VFs.
Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
---
hw/acpi/pcihp.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/hw/acpi/pcihp.c b/hw/acpi/pcihp.c
index 6351bd3424d..248839e1110 100644
--- a/hw/acpi/pcihp.c
+++ b/hw/acpi/pcihp.c
@@ -192,8 +192,12 @@ static bool acpi_pcihp_pc_no_hotplug(AcpiPciHpState *s, PCIDevice *dev)
* ACPI doesn't allow hotplug of bridge devices. Don't allow
* hot-unplug of bridge devices unless they were added by hotplug
* (and so, not described by acpi).
+ *
+ * Don't allow hot-unplug of SR-IOV Virtual Functions, as they
+ * will be removed implicitly, when Physical Function is unplugged.
*/
- return (pc->is_bridge && !dev->qdev.hotplugged) || !dc->hotpluggable;
+ return (pc->is_bridge && !dev->qdev.hotplugged) || !dc->hotpluggable ||
+ pci_is_vf(dev);
}
static void acpi_pcihp_eject_slot(AcpiPciHpState *s, unsigned bsel, unsigned slots)
--
2.25.1
^ permalink raw reply related [flat|nested] 21+ messages in thread* Re: [PATCH v7 12/12] hw/acpi: Make the PCI hot-plug aware of SR-IOV
2022-03-18 19:18 ` [PATCH v7 12/12] hw/acpi: Make the PCI hot-plug aware of SR-IOV Lukasz Maniak
@ 2022-03-31 12:38 ` Igor Mammedov
2022-04-04 9:41 ` Łukasz Gieryk
2022-04-20 11:59 ` Michael S. Tsirkin
1 sibling, 1 reply; 21+ messages in thread
From: Igor Mammedov @ 2022-03-31 12:38 UTC (permalink / raw)
To: Lukasz Maniak
Cc: fam, kwolf, stefanha, qemu-block, mst, armbru, lukasz.gieryk,
f4bug, qemu-devel, kbusch, its, hreitz, xypron.glpk, k.jensen,
ani
On Fri, 18 Mar 2022 20:18:19 +0100
Lukasz Maniak <lukasz.maniak@linux.intel.com> wrote:
> From: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
>
> PCI device capable of SR-IOV support is a new, still-experimental
> feature with only a single working example of the Nvme device.
>
> This patch in an attempt to fix a double-free problem when a
> SR-IOV-capable Nvme device is hot-unplugged. The problem and the
> reproduction steps can be found in this thread:
>
> https://patchew.org/QEMU/20220217174504.1051716-1-lukasz.maniak@linux.intel.com/20220217174504.1051716-14-lukasz.maniak@linux.intel.com/
pls include that in patch description.
> Details of the proposed solution are, for convenience, included below.
>
> 1) The current SR-IOV implementation assumes it’s the PhysicalFunction
> that creates and deletes VirtualFunctions.
> 2) It’s a design decision (the Nvme device at least) for the VFs to be
> of the same class as PF. Effectively, they share the dc->hotpluggable
> value.
> 3) When a VF is created, it’s added as a child node to PF’s PCI bus
> slot.
> 4) Monitor/device_del triggers the ACPI mechanism. The implementation is
> not aware of SR/IOV and ejects PF’s PCI slot, directly unrealizing all
> hot-pluggable (!acpi_pcihp_pc_no_hotplug) children nodes.
> 5) VFs are unrealized directly, and it doesn’t work well with (1).
> SR/IOV structures are not updated, so when it’s PF’s turn to be
> unrealized, it works on stale pointers to already-deleted VFs.
it's unclear what's bing hotpluged and unplugged, it would be better if
you included QEMU CLI and relevan qmp/monito commands to reproduce it.
>
> Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
> ---
> hw/acpi/pcihp.c | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/hw/acpi/pcihp.c b/hw/acpi/pcihp.c
> index 6351bd3424d..248839e1110 100644
> --- a/hw/acpi/pcihp.c
> +++ b/hw/acpi/pcihp.c
> @@ -192,8 +192,12 @@ static bool acpi_pcihp_pc_no_hotplug(AcpiPciHpState *s, PCIDevice *dev)
> * ACPI doesn't allow hotplug of bridge devices. Don't allow
> * hot-unplug of bridge devices unless they were added by hotplug
> * (and so, not described by acpi).
> + *
> + * Don't allow hot-unplug of SR-IOV Virtual Functions, as they
> + * will be removed implicitly, when Physical Function is unplugged.
> */
> - return (pc->is_bridge && !dev->qdev.hotplugged) || !dc->hotpluggable;
> + return (pc->is_bridge && !dev->qdev.hotplugged) || !dc->hotpluggable ||
> + pci_is_vf(dev);
> }
>
> static void acpi_pcihp_eject_slot(AcpiPciHpState *s, unsigned bsel, unsigned slots)
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v7 12/12] hw/acpi: Make the PCI hot-plug aware of SR-IOV
2022-03-31 12:38 ` Igor Mammedov
@ 2022-04-04 9:41 ` Łukasz Gieryk
2022-04-20 10:59 ` Lukasz Maniak
0 siblings, 1 reply; 21+ messages in thread
From: Łukasz Gieryk @ 2022-04-04 9:41 UTC (permalink / raw)
To: Igor Mammedov
Cc: fam, kwolf, Lukasz Maniak, stefanha, qemu-block, mst, qemu-devel,
k.jensen, armbru, f4bug, kbusch, its, hreitz, xypron.glpk, ani
On Thu, Mar 31, 2022 at 02:38:41PM +0200, Igor Mammedov wrote:
> it's unclear what's bing hotpluged and unplugged, it would be better if
> you included QEMU CLI and relevan qmp/monito commands to reproduce it.
Qemu CLI:
---------
-device pcie-root-port,slot=0,id=rp0
-device nvme-subsys,id=subsys0
-device nvme,id=nvme0,bus=rp0,serial=deadbeef,subsys=subsys0,sriov_max_vfs=1,sriov_vq_flexible=2,sriov_vi_flexible=1
Guest OS:
---------
sudo nvme virt-mgmt /dev/nvme0 -c 0 -r 1 -a 1 -n 0
sudo nvme virt-mgmt /dev/nvme0 -c 0 -r 0 -a 1 -n 0
echo 1 > /sys/bus/pci/devices/0000:01:00.0/reset
sleep 1
echo 1 > /sys/bus/pci/devices/0000:01:00.0/sriov_numvfs
nvme virt-mgmt /dev/nvme0 -c 1 -r 1 -a 8 -n 1
nvme virt-mgmt /dev/nvme0 -c 1 -r 0 -a 8 -n 2
nvme virt-mgmt /dev/nvme0 -c 1 -r 0 -a 9 -n 0
sleep 2
echo 01:00.1 > /sys/bus/pci/drivers/nvme/bind
Qemu monitor:
-------------
device_del nvme0
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v7 12/12] hw/acpi: Make the PCI hot-plug aware of SR-IOV
2022-04-04 9:41 ` Łukasz Gieryk
@ 2022-04-20 10:59 ` Lukasz Maniak
0 siblings, 0 replies; 21+ messages in thread
From: Lukasz Maniak @ 2022-04-20 10:59 UTC (permalink / raw)
To: qemu-devel, Igor Mammedov
Cc: fam, kwolf, stefanha, qemu-block, mst, k.jensen,
Łukasz Gieryk, armbru, f4bug, kbusch, its, hreitz,
xypron.glpk, ani
On Mon, Apr 04, 2022 at 11:41:46AM +0200, Łukasz Gieryk wrote:
> On Thu, Mar 31, 2022 at 02:38:41PM +0200, Igor Mammedov wrote:
> > it's unclear what's bing hotpluged and unplugged, it would be better if
> > you included QEMU CLI and relevan qmp/monito commands to reproduce it.
>
> Qemu CLI:
> ---------
> -device pcie-root-port,slot=0,id=rp0
> -device nvme-subsys,id=subsys0
> -device nvme,id=nvme0,bus=rp0,serial=deadbeef,subsys=subsys0,sriov_max_vfs=1,sriov_vq_flexible=2,sriov_vi_flexible=1
>
> Guest OS:
> ---------
> sudo nvme virt-mgmt /dev/nvme0 -c 0 -r 1 -a 1 -n 0
> sudo nvme virt-mgmt /dev/nvme0 -c 0 -r 0 -a 1 -n 0
> echo 1 > /sys/bus/pci/devices/0000:01:00.0/reset
> sleep 1
> echo 1 > /sys/bus/pci/devices/0000:01:00.0/sriov_numvfs
> nvme virt-mgmt /dev/nvme0 -c 1 -r 1 -a 8 -n 1
> nvme virt-mgmt /dev/nvme0 -c 1 -r 0 -a 8 -n 2
> nvme virt-mgmt /dev/nvme0 -c 1 -r 0 -a 9 -n 0
> sleep 2
> echo 01:00.1 > /sys/bus/pci/drivers/nvme/bind
>
> Qemu monitor:
> -------------
> device_del nvme0
>
Hi Igor,
Do you need any more details on this?
Best regards,
Lukasz
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v7 12/12] hw/acpi: Make the PCI hot-plug aware of SR-IOV
2022-03-18 19:18 ` [PATCH v7 12/12] hw/acpi: Make the PCI hot-plug aware of SR-IOV Lukasz Maniak
2022-03-31 12:38 ` Igor Mammedov
@ 2022-04-20 11:59 ` Michael S. Tsirkin
1 sibling, 0 replies; 21+ messages in thread
From: Michael S. Tsirkin @ 2022-04-20 11:59 UTC (permalink / raw)
To: Lukasz Maniak
Cc: fam, kwolf, stefanha, qemu-block, armbru, lukasz.gieryk, f4bug,
qemu-devel, kbusch, its, hreitz, xypron.glpk, k.jensen, ani,
imammedo
On Fri, Mar 18, 2022 at 08:18:19PM +0100, Lukasz Maniak wrote:
> From: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
>
> PCI device capable of SR-IOV support is a new, still-experimental
> feature with only a single working example of the Nvme device.
>
> This patch in an attempt to fix a double-free problem when a
> SR-IOV-capable Nvme device is hot-unplugged. The problem and the
> reproduction steps can be found in this thread:
>
> https://patchew.org/QEMU/20220217174504.1051716-1-lukasz.maniak@linux.intel.com/20220217174504.1051716-14-lukasz.maniak@linux.intel.com/
>
> Details of the proposed solution are, for convenience, included below.
>
> 1) The current SR-IOV implementation assumes it’s the PhysicalFunction
> that creates and deletes VirtualFunctions.
> 2) It’s a design decision (the Nvme device at least) for the VFs to be
> of the same class as PF. Effectively, they share the dc->hotpluggable
> value.
> 3) When a VF is created, it’s added as a child node to PF’s PCI bus
> slot.
> 4) Monitor/device_del triggers the ACPI mechanism. The implementation is
> not aware of SR/IOV and ejects PF’s PCI slot, directly unrealizing all
> hot-pluggable (!acpi_pcihp_pc_no_hotplug) children nodes.
> 5) VFs are unrealized directly, and it doesn’t work well with (1).
> SR/IOV structures are not updated, so when it’s PF’s turn to be
> unrealized, it works on stale pointers to already-deleted VFs.
>
> Signed-off-by: Łukasz Gieryk <lukasz.gieryk@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
feel free to include when merging the rest of the patchset.
> ---
> hw/acpi/pcihp.c | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/hw/acpi/pcihp.c b/hw/acpi/pcihp.c
> index 6351bd3424d..248839e1110 100644
> --- a/hw/acpi/pcihp.c
> +++ b/hw/acpi/pcihp.c
> @@ -192,8 +192,12 @@ static bool acpi_pcihp_pc_no_hotplug(AcpiPciHpState *s, PCIDevice *dev)
> * ACPI doesn't allow hotplug of bridge devices. Don't allow
> * hot-unplug of bridge devices unless they were added by hotplug
> * (and so, not described by acpi).
> + *
> + * Don't allow hot-unplug of SR-IOV Virtual Functions, as they
> + * will be removed implicitly, when Physical Function is unplugged.
> */
> - return (pc->is_bridge && !dev->qdev.hotplugged) || !dc->hotpluggable;
> + return (pc->is_bridge && !dev->qdev.hotplugged) || !dc->hotpluggable ||
> + pci_is_vf(dev);
> }
>
> static void acpi_pcihp_eject_slot(AcpiPciHpState *s, unsigned bsel, unsigned slots)
> --
> 2.25.1
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v7 00/12] hw/nvme: SR-IOV with Virtualization Enhancements
2022-03-18 19:18 [PATCH v7 00/12] hw/nvme: SR-IOV with Virtualization Enhancements Lukasz Maniak
` (11 preceding siblings ...)
2022-03-18 19:18 ` [PATCH v7 12/12] hw/acpi: Make the PCI hot-plug aware of SR-IOV Lukasz Maniak
@ 2022-04-20 12:02 ` Michael S. Tsirkin
2022-04-20 12:12 ` Klaus Jensen
2022-04-28 19:56 ` Klaus Jensen
13 siblings, 1 reply; 21+ messages in thread
From: Michael S. Tsirkin @ 2022-04-20 12:02 UTC (permalink / raw)
To: Lukasz Maniak
Cc: fam, kwolf, stefanha, qemu-block, armbru, lukasz.gieryk, f4bug,
qemu-devel, kbusch, its, hreitz, xypron.glpk, k.jensen, ani,
imammedo
On Fri, Mar 18, 2022 at 08:18:07PM +0100, Lukasz Maniak wrote:
> Resubmitting v6 as v7 since Patchew got lost with my sophisticated CC of
> all maintainers just for the cover letter.
>
> Changes since v5:
> - Fixed PCI hotplug issue related to deleting VF twice
> - Corrected error messages for SR-IOV parameters
> - Rebased on master, patches for PCI got pulled into the tree
> - Added Reviewed-by labels
>
> Lukasz Maniak (4):
> hw/nvme: Add support for SR-IOV
> hw/nvme: Add support for Primary Controller Capabilities
> hw/nvme: Add support for Secondary Controller List
> docs: Add documentation for SR-IOV and Virtualization Enhancements
>
> Łukasz Gieryk (8):
> hw/nvme: Implement the Function Level Reset
> hw/nvme: Make max_ioqpairs and msix_qsize configurable in runtime
> hw/nvme: Remove reg_size variable and update BAR0 size calculation
> hw/nvme: Calculate BAR attributes in a function
> hw/nvme: Initialize capability structures for primary/secondary
> controllers
> hw/nvme: Add support for the Virtualization Management command
> hw/nvme: Update the initalization place for the AER queue
> hw/acpi: Make the PCI hot-plug aware of SR-IOV
the right people to review and merge this would be storage/nvme
maintainers.
I did take a quick look though.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
> docs/system/devices/nvme.rst | 82 +++++
> hw/acpi/pcihp.c | 6 +-
> hw/nvme/ctrl.c | 673 ++++++++++++++++++++++++++++++++---
> hw/nvme/ns.c | 2 +-
> hw/nvme/nvme.h | 55 ++-
> hw/nvme/subsys.c | 75 +++-
> hw/nvme/trace-events | 6 +
> include/block/nvme.h | 65 ++++
> include/hw/pci/pci_ids.h | 1 +
> 9 files changed, 909 insertions(+), 56 deletions(-)
>
> --
> 2.25.1
^ permalink raw reply [flat|nested] 21+ messages in thread* Re: [PATCH v7 00/12] hw/nvme: SR-IOV with Virtualization Enhancements
2022-04-20 12:02 ` [PATCH v7 00/12] hw/nvme: SR-IOV with Virtualization Enhancements Michael S. Tsirkin
@ 2022-04-20 12:12 ` Klaus Jensen
2022-04-20 14:50 ` Lukasz Maniak
0 siblings, 1 reply; 21+ messages in thread
From: Klaus Jensen @ 2022-04-20 12:12 UTC (permalink / raw)
To: Michael S. Tsirkin
Cc: fam, kwolf, Lukasz Maniak, stefanha, qemu-block, qemu-devel,
k.jensen, armbru, f4bug, kbusch, hreitz, xypron.glpk,
lukasz.gieryk, ani, imammedo
[-- Attachment #1: Type: text/plain, Size: 1545 bytes --]
On Apr 20 08:02, Michael S. Tsirkin wrote:
> On Fri, Mar 18, 2022 at 08:18:07PM +0100, Lukasz Maniak wrote:
> > Resubmitting v6 as v7 since Patchew got lost with my sophisticated CC of
> > all maintainers just for the cover letter.
> >
> > Changes since v5:
> > - Fixed PCI hotplug issue related to deleting VF twice
> > - Corrected error messages for SR-IOV parameters
> > - Rebased on master, patches for PCI got pulled into the tree
> > - Added Reviewed-by labels
> >
> > Lukasz Maniak (4):
> > hw/nvme: Add support for SR-IOV
> > hw/nvme: Add support for Primary Controller Capabilities
> > hw/nvme: Add support for Secondary Controller List
> > docs: Add documentation for SR-IOV and Virtualization Enhancements
> >
> > Łukasz Gieryk (8):
> > hw/nvme: Implement the Function Level Reset
> > hw/nvme: Make max_ioqpairs and msix_qsize configurable in runtime
> > hw/nvme: Remove reg_size variable and update BAR0 size calculation
> > hw/nvme: Calculate BAR attributes in a function
> > hw/nvme: Initialize capability structures for primary/secondary
> > controllers
> > hw/nvme: Add support for the Virtualization Management command
> > hw/nvme: Update the initalization place for the AER queue
> > hw/acpi: Make the PCI hot-plug aware of SR-IOV
>
> the right people to review and merge this would be storage/nvme
> maintainers.
> I did take a quick look though.
>
> Acked-by: Michael S. Tsirkin <mst@redhat.com>
>
Was waiting for a review on the acpi stuff. Thanks! :)
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v7 00/12] hw/nvme: SR-IOV with Virtualization Enhancements
2022-04-20 12:12 ` Klaus Jensen
@ 2022-04-20 14:50 ` Lukasz Maniak
0 siblings, 0 replies; 21+ messages in thread
From: Lukasz Maniak @ 2022-04-20 14:50 UTC (permalink / raw)
To: Klaus Jensen, Michael S. Tsirkin
Cc: fam, kwolf, stefanha, qemu-block, armbru, lukasz.gieryk, f4bug,
qemu-devel, kbusch, hreitz, xypron.glpk, k.jensen, ani, imammedo
On Wed, Apr 20, 2022 at 02:12:58PM +0200, Klaus Jensen wrote:
> On Apr 20 08:02, Michael S. Tsirkin wrote:
> > On Fri, Mar 18, 2022 at 08:18:07PM +0100, Lukasz Maniak wrote:
> > > Resubmitting v6 as v7 since Patchew got lost with my sophisticated CC of
> > > all maintainers just for the cover letter.
> > >
> > > Changes since v5:
> > > - Fixed PCI hotplug issue related to deleting VF twice
> > > - Corrected error messages for SR-IOV parameters
> > > - Rebased on master, patches for PCI got pulled into the tree
> > > - Added Reviewed-by labels
> > >
> > > Lukasz Maniak (4):
> > > hw/nvme: Add support for SR-IOV
> > > hw/nvme: Add support for Primary Controller Capabilities
> > > hw/nvme: Add support for Secondary Controller List
> > > docs: Add documentation for SR-IOV and Virtualization Enhancements
> > >
> > > Łukasz Gieryk (8):
> > > hw/nvme: Implement the Function Level Reset
> > > hw/nvme: Make max_ioqpairs and msix_qsize configurable in runtime
> > > hw/nvme: Remove reg_size variable and update BAR0 size calculation
> > > hw/nvme: Calculate BAR attributes in a function
> > > hw/nvme: Initialize capability structures for primary/secondary
> > > controllers
> > > hw/nvme: Add support for the Virtualization Management command
> > > hw/nvme: Update the initalization place for the AER queue
> > > hw/acpi: Make the PCI hot-plug aware of SR-IOV
> >
> > the right people to review and merge this would be storage/nvme
> > maintainers.
> > I did take a quick look though.
> >
> > Acked-by: Michael S. Tsirkin <mst@redhat.com>
> >
>
> Was waiting for a review on the acpi stuff. Thanks! :)
Thank you for checking and acking Michael :)
Klaus, looking through the list of patches, we are still missing reviews
for numbers 03, 08 and 09.
Do you want me to update to v8 or wait for a review first?
Thanks,
Lukasz
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: [PATCH v7 00/12] hw/nvme: SR-IOV with Virtualization Enhancements
2022-03-18 19:18 [PATCH v7 00/12] hw/nvme: SR-IOV with Virtualization Enhancements Lukasz Maniak
` (12 preceding siblings ...)
2022-04-20 12:02 ` [PATCH v7 00/12] hw/nvme: SR-IOV with Virtualization Enhancements Michael S. Tsirkin
@ 2022-04-28 19:56 ` Klaus Jensen
13 siblings, 0 replies; 21+ messages in thread
From: Klaus Jensen @ 2022-04-28 19:56 UTC (permalink / raw)
To: Lukasz Maniak
Cc: fam, kwolf, stefanha, qemu-block, mst, armbru, lukasz.gieryk,
f4bug, qemu-devel, kbusch, hreitz, xypron.glpk, k.jensen, ani,
imammedo
[-- Attachment #1: Type: text/plain, Size: 1758 bytes --]
On Mar 18 20:18, Lukasz Maniak wrote:
> Resubmitting v6 as v7 since Patchew got lost with my sophisticated CC of
> all maintainers just for the cover letter.
>
> Changes since v5:
> - Fixed PCI hotplug issue related to deleting VF twice
> - Corrected error messages for SR-IOV parameters
> - Rebased on master, patches for PCI got pulled into the tree
> - Added Reviewed-by labels
>
> Lukasz Maniak (4):
> hw/nvme: Add support for SR-IOV
> hw/nvme: Add support for Primary Controller Capabilities
> hw/nvme: Add support for Secondary Controller List
> docs: Add documentation for SR-IOV and Virtualization Enhancements
>
> Łukasz Gieryk (8):
> hw/nvme: Implement the Function Level Reset
> hw/nvme: Make max_ioqpairs and msix_qsize configurable in runtime
> hw/nvme: Remove reg_size variable and update BAR0 size calculation
> hw/nvme: Calculate BAR attributes in a function
> hw/nvme: Initialize capability structures for primary/secondary
> controllers
> hw/nvme: Add support for the Virtualization Management command
> hw/nvme: Update the initalization place for the AER queue
> hw/acpi: Make the PCI hot-plug aware of SR-IOV
>
> docs/system/devices/nvme.rst | 82 +++++
> hw/acpi/pcihp.c | 6 +-
> hw/nvme/ctrl.c | 673 ++++++++++++++++++++++++++++++++---
> hw/nvme/ns.c | 2 +-
> hw/nvme/nvme.h | 55 ++-
> hw/nvme/subsys.c | 75 +++-
> hw/nvme/trace-events | 6 +
> include/block/nvme.h | 65 ++++
> include/hw/pci/pci_ids.h | 1 +
> 9 files changed, 909 insertions(+), 56 deletions(-)
>
Series (hw/nvme parts) looks good.
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 21+ messages in thread