* [PATCH 0/4] Add support for sam9x60_curiosity
@ 2022-03-21 10:34 Durai Manickam KR
2022-03-21 10:34 ` [PATCH 1/4] board: Add sam9x60_curiosity support Durai Manickam KR
` (3 more replies)
0 siblings, 4 replies; 8+ messages in thread
From: Durai Manickam KR @ 2022-03-21 10:34 UTC (permalink / raw)
To: u-boot; +Cc: durai.manickamkr, MPUSWLinux, Eugen.Hristev
This patch series adds support for sam9x60_curiosity.
Durai Manickam KR (4):
board: Add sam9x60_curiosity support
ARM: dts: Add device tree files for sam9x60_curiosity
configs: Add sam9x60_curiosity_mmc_defconfig
configs: Add sam9x60_curiosity_nandflash_defconfig
arch/arm/dts/Makefile | 2 +
.../dts/at91-sam9x60_curiosity-u-boot.dtsi | 79 ++++++++++
arch/arm/dts/at91-sam9x60_curiosity.dts | 74 ++++++++++
arch/arm/mach-at91/Kconfig | 10 ++
board/atmel/sam9x60_curiosity/Kconfig | 15 ++
board/atmel/sam9x60_curiosity/MAINTAINERS | 8 +
board/atmel/sam9x60_curiosity/Makefile | 7 +
.../sam9x60_curiosity/sam9x60_curiosity.c | 139 ++++++++++++++++++
configs/sam9x60_curiosity_mmc_defconfig | 82 +++++++++++
configs/sam9x60_curiosity_nandflash_defconfig | 82 +++++++++++
include/configs/sam9x60_curiosity.h | 67 +++++++++
11 files changed, 565 insertions(+)
create mode 100644 arch/arm/dts/at91-sam9x60_curiosity-u-boot.dtsi
create mode 100644 arch/arm/dts/at91-sam9x60_curiosity.dts
create mode 100644 board/atmel/sam9x60_curiosity/Kconfig
create mode 100644 board/atmel/sam9x60_curiosity/MAINTAINERS
create mode 100644 board/atmel/sam9x60_curiosity/Makefile
create mode 100644 board/atmel/sam9x60_curiosity/sam9x60_curiosity.c
create mode 100644 configs/sam9x60_curiosity_mmc_defconfig
create mode 100644 configs/sam9x60_curiosity_nandflash_defconfig
create mode 100644 include/configs/sam9x60_curiosity.h
--
2.25.1
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 1/4] board: Add sam9x60_curiosity support
2022-03-21 10:34 [PATCH 0/4] Add support for sam9x60_curiosity Durai Manickam KR
@ 2022-03-21 10:34 ` Durai Manickam KR
2022-03-21 16:32 ` Eugen.Hristev
2022-03-21 10:34 ` [PATCH 2/4] ARM: dts: Add device tree files for sam9x60_curiosity Durai Manickam KR
` (2 subsequent siblings)
3 siblings, 1 reply; 8+ messages in thread
From: Durai Manickam KR @ 2022-03-21 10:34 UTC (permalink / raw)
To: u-boot; +Cc: durai.manickamkr, MPUSWLinux, Eugen.Hristev
Add board files, Kconfig, Makefile and MAINTAINERS.
Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
---
arch/arm/mach-at91/Kconfig | 10 ++
board/atmel/sam9x60_curiosity/Kconfig | 15 ++
board/atmel/sam9x60_curiosity/MAINTAINERS | 6 +
board/atmel/sam9x60_curiosity/Makefile | 7 +
.../sam9x60_curiosity/sam9x60_curiosity.c | 139 ++++++++++++++++++
include/configs/sam9x60_curiosity.h | 67 +++++++++
6 files changed, 244 insertions(+)
create mode 100644 board/atmel/sam9x60_curiosity/Kconfig
create mode 100644 board/atmel/sam9x60_curiosity/MAINTAINERS
create mode 100644 board/atmel/sam9x60_curiosity/Makefile
create mode 100644 board/atmel/sam9x60_curiosity/sam9x60_curiosity.c
create mode 100644 include/configs/sam9x60_curiosity.h
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 00f31045d6..7a1dbff069 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -161,6 +161,12 @@ config TARGET_SAM9X60EK
select BOARD_EARLY_INIT_F
select BOARD_LATE_INIT
+config TARGET_SAM9X60_CURIOSITY
+ bool "SAM9X60 CURIOSITY board"
+ select SAM9X60
+ select BOARD_EARLY_INIT_F
+ select BOARD_LATE_INIT
+
config TARGET_SAMA5D2_PTC_EK
bool "SAMA5D2 PTC EK board"
select BOARD_EARLY_INIT_F
@@ -310,6 +316,9 @@ config AT91_EFLASH
Enable the driver for the embedded flash used in the Atmel
AT91SAM9XE devices.
+config ATMEL_LEGACY
+ bool "Legacy GPIO support"
+
source "board/atmel/at91sam9260ek/Kconfig"
source "board/atmel/at91sam9261ek/Kconfig"
source "board/atmel/at91sam9263ek/Kconfig"
@@ -318,6 +327,7 @@ source "board/atmel/at91sam9n12ek/Kconfig"
source "board/atmel/at91sam9rlek/Kconfig"
source "board/atmel/at91sam9x5ek/Kconfig"
source "board/atmel/sam9x60ek/Kconfig"
+source "board/atmel/sam9x60_curiosity/Kconfig"
source "board/atmel/sama7g5ek/Kconfig"
source "board/atmel/sama5d2_ptc_ek/Kconfig"
source "board/atmel/sama5d2_xplained/Kconfig"
diff --git a/board/atmel/sam9x60_curiosity/Kconfig b/board/atmel/sam9x60_curiosity/Kconfig
new file mode 100644
index 0000000000..ae84e0f32c
--- /dev/null
+++ b/board/atmel/sam9x60_curiosity/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_SAM9X60_CURIOSITY
+
+config SYS_BOARD
+ default "sam9x60_curiosity"
+
+config SYS_VENDOR
+ default "atmel"
+
+config SYS_SOC
+ default "at91"
+
+config SYS_CONFIG_NAME
+ default "sam9x60_curiosity"
+
+endif
diff --git a/board/atmel/sam9x60_curiosity/MAINTAINERS b/board/atmel/sam9x60_curiosity/MAINTAINERS
new file mode 100644
index 0000000000..84a3a9f186
--- /dev/null
+++ b/board/atmel/sam9x60_curiosity/MAINTAINERS
@@ -0,0 +1,6 @@
+SAM9X60 CURIOSITY BOARD
+M: Durai Manickam KR <durai.manickamkr@microchip.com>
+M: Eugen Hristev <eugen.hristev@microchip.com>
+S: Maintained
+F: board/atmel/sam9x60_curiosity/
+F: include/configs/sam9x60_curiosity.h
diff --git a/board/atmel/sam9x60_curiosity/Makefile b/board/atmel/sam9x60_curiosity/Makefile
new file mode 100644
index 0000000000..c4d17e66d4
--- /dev/null
+++ b/board/atmel/sam9x60_curiosity/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+#
+# Author: Durai Manickam KR <durai.manickamkr@microchip.com>
+
+obj-y += sam9x60_curiosity.o
diff --git a/board/atmel/sam9x60_curiosity/sam9x60_curiosity.c b/board/atmel/sam9x60_curiosity/sam9x60_curiosity.c
new file mode 100644
index 0000000000..3c5470b03c
--- /dev/null
+++ b/board/atmel/sam9x60_curiosity/sam9x60_curiosity.c
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Durai Manickam KR <durai.manickamkr@microchip.com>
+ */
+
+#include <common.h>
+#include <debug_uart.h>
+#include <fdtdec.h>
+#include <init.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/at91_sfr.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/gpio.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/mach-types.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void at91_prepare_cpu_var(void);
+
+#ifdef CONFIG_CMD_NAND
+static void sam9x60_curiosity_nand_hw_init(void)
+{
+ struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+ struct atmel_sfr *sfr = (struct atmel_sfr *)ATMEL_BASE_SFR;
+ unsigned int csa;
+
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 0, 1); /* NAND OE */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 1, 1); /* NAND WE */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 2, 0); /* NAND ALE */
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 3, 0); /* NAND CLE */
+ /* Enable NandFlash */
+ at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+ /* Configure RDY/BSY */
+ at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 6, 1);
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 7, 1);
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 8, 1);
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 9, 1);
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 10, 1);
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 11, 1);
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 12, 1);
+ at91_pio3_set_a_periph(AT91_PIO_PORTD, 13, 1);
+
+ at91_periph_clk_enable(ATMEL_ID_PIOD);
+
+ /* Enable CS3 */
+ csa = readl(&sfr->ebicsa);
+ csa |= AT91_SFR_CCFG_EBI_CSA(3, 1) | AT91_SFR_CCFG_NFD0_ON_D16;
+
+ /* Configure IO drive */
+ csa &= ~AT91_SFR_CCFG_EBI_DRIVE_SAM9X60;
+
+ writel(csa, &sfr->ebicsa);
+
+ /* Configure SMC CS3 for NAND/SmartMedia */
+ writel(AT91_SMC_SETUP_NWE(4), &smc->cs[3].setup);
+
+ writel(AT91_SMC_PULSE_NWE(10) | AT91_SMC_PULSE_NCS_WR(20) |
+ AT91_SMC_PULSE_NRD(10) | AT91_SMC_PULSE_NCS_RD(20),
+ &smc->cs[3].pulse);
+
+ writel(AT91_SMC_CYCLE_NWE(20) | AT91_SMC_CYCLE_NRD(20),
+ &smc->cs[3].cycle);
+
+ writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+#ifdef CONFIG_SYS_NAND_DBW_16
+ AT91_SMC_MODE_DBW_16 |
+#else /* CONFIG_SYS_NAND_DBW_8 */
+ AT91_SMC_MODE_DBW_8 |
+#endif
+ AT91_SMC_MODE_TDF | AT91_SMC_MODE_TDF_CYCLE(15),
+ &smc->cs[3].mode);
+}
+#endif
+
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+ at91_prepare_cpu_var();
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_DEBUG_UART_BOARD_INIT
+void board_debug_uart_init(void)
+{
+ at91_seriald_hw_init();
+}
+#endif
+
+#ifdef CONFIG_BOARD_EARLY_INIT_F
+int board_early_init_f(void)
+{
+#ifdef CONFIG_DEBUG_UART
+ debug_uart_init();
+#endif
+ return 0;
+}
+#endif
+
+#define MAC24AA_MAC_OFFSET 0xfa
+
+#ifdef CONFIG_MISC_INIT_R
+int misc_init_r(void)
+{
+#ifdef CONFIG_I2C_EEPROM
+ at91_set_ethaddr(MAC24AA_MAC_OFFSET);
+#endif
+ return 0;
+}
+#endif
+
+int board_init(void)
+{
+ /* address of boot parameters */
+ gd->bd->bi_boot_params = gd->bd->bi_dram[0].start + 0x100;
+
+#ifdef CONFIG_CMD_NAND
+ sam9x60_curiosity_nand_hw_init();
+#endif
+ return 0;
+}
+
+int dram_init_banksize(void)
+{
+ return fdtdec_setup_memory_banksize();
+}
+
+int dram_init(void)
+{
+ return fdtdec_setup_mem_size_base();
+}
diff --git a/include/configs/sam9x60_curiosity.h b/include/configs/sam9x60_curiosity.h
new file mode 100644
index 0000000000..4ec380ee54
--- /dev/null
+++ b/include/configs/sam9x60_curiosity.h
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Configuration settings for the SAM9X60 CURIOSITY board.
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Durai Manickam KR <durai.manickamkr@microchip.com>
+ */
+
+#ifndef __CONFIG_H__
+#define __CONFIG_H__
+
+#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
+#define CONFIG_SYS_AT91_MAIN_CLOCK 24000000 /* 24 MHz crystal */
+
+#define CONFIG_USART_BASE ATMEL_BASE_DBGU
+#define CONFIG_USART_ID 0 /* ignored in arm */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+/* SDRAM */
+#define CONFIG_SYS_SDRAM_BASE 0x20000000
+#define CONFIG_SYS_SDRAM_SIZE 0x8000000 /* 128 MB */
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_INIT_SP_ADDR 0x218000
+#else
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_SDRAM_BASE + 16 * 1024 + CONFIG_SYS_MALLOC_F_LEN - \
+ GENERATED_GBL_DATA_SIZE)
+#endif
+
+/* NAND flash */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE 0x40000000
+#define CONFIG_SYS_NAND_MASK_ALE BIT(21)
+#define CONFIG_SYS_NAND_MASK_CLE BIT(22)
+#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD4
+#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD5
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+#endif
+
+#ifndef CONFIG_BOOTCOMMAND
+#ifdef CONFIG_SD_BOOT
+/* bootstrap + u-boot + env + linux in sd card */
+#define CONFIG_BOOTCOMMAND "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART \
+ " 0x21000000 at91-sam9x60_curiosity.dtb;" \
+ "fatload mmc " \
+ CONFIG_ENV_FAT_DEVICE_AND_PART \
+ " 0x22000000 zImage;" \
+ "bootz 0x22000000 - 0x21000000"
+#elif defined(CONFIG_NAND_BOOT)
+/* bootstrap + u-boot + env + linux in nandflash */
+#define CONFIG_BOOTCOMMAND "nand read " \
+ "0x22000000 0x200000 0x600000; " \
+ "nand read 0x21000000 0x180000 0x20000; " \
+ "bootz 0x22000000 - 0x21000000"
+#else
+#define CONFIG_BOOTCOMMAND "Place your bootcommand here"
+#endif
+#endif
+
+#endif
--
2.25.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 2/4] ARM: dts: Add device tree files for sam9x60_curiosity
2022-03-21 10:34 [PATCH 0/4] Add support for sam9x60_curiosity Durai Manickam KR
2022-03-21 10:34 ` [PATCH 1/4] board: Add sam9x60_curiosity support Durai Manickam KR
@ 2022-03-21 10:34 ` Durai Manickam KR
2022-03-21 10:34 ` [PATCH 3/4] configs: Add sam9x60_curiosity_mmc_defconfig Durai Manickam KR
2022-03-21 10:34 ` [PATCH 4/4] configs: Add sam9x60_curiosity_nandflash_defconfig Durai Manickam KR
3 siblings, 0 replies; 8+ messages in thread
From: Durai Manickam KR @ 2022-03-21 10:34 UTC (permalink / raw)
To: u-boot; +Cc: durai.manickamkr, MPUSWLinux, Eugen.Hristev
Add dts and dtsi files.
Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
---
arch/arm/dts/Makefile | 2 +
.../dts/at91-sam9x60_curiosity-u-boot.dtsi | 79 +++++++++++++++++++
arch/arm/dts/at91-sam9x60_curiosity.dts | 74 +++++++++++++++++
3 files changed, 155 insertions(+)
create mode 100644 arch/arm/dts/at91-sam9x60_curiosity-u-boot.dtsi
create mode 100644 arch/arm/dts/at91-sam9x60_curiosity.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 644ba961a2..fefa612d49 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1006,6 +1006,8 @@ dtb-$(CONFIG_TARGET_AT91SAM9X5EK) += \
dtb-$(CONFIG_TARGET_SAM9X60EK) += sam9x60ek.dtb
+dtb-$(CONFIG_TARGET_SAM9X60_CURIOSITY) += at91-sam9x60_curiosity.dtb
+
dtb-$(CONFIG_TARGET_AT91SAM9N12EK) += at91sam9n12ek.dtb
dtb-$(CONFIG_TARGET_GARDENA_SMART_GATEWAY_AT91SAM) += \
diff --git a/arch/arm/dts/at91-sam9x60_curiosity-u-boot.dtsi b/arch/arm/dts/at91-sam9x60_curiosity-u-boot.dtsi
new file mode 100644
index 0000000000..d176e20f28
--- /dev/null
+++ b/arch/arm/dts/at91-sam9x60_curiosity-u-boot.dtsi
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sam9x60_curiosity-u-boot.dtsi - Device Tree Include file for SAM9X60
+ * CURIOSITY.
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Durai Manickam KR <durai.manickamkr@microchip.com>
+ */
+
+/ {
+ ahb {
+ u-boot,dm-pre-reloc;
+
+ apb {
+ u-boot,dm-pre-reloc;
+
+ pinctrl {
+ u-boot,dm-pre-reloc;
+ };
+ };
+ };
+
+ chosen {
+ u-boot,dm-pre-reloc;
+ };
+};
+
+&clk32 {
+ u-boot,dm-pre-reloc;
+};
+
+&dbgu {
+ u-boot,dm-pre-reloc;
+};
+
+&main_rc {
+ u-boot,dm-pre-reloc;
+};
+
+&main_xtal {
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl_dbgu {
+ u-boot,dm-pre-reloc;
+};
+
+&pinctrl_sdhci0 {
+ u-boot,dm-pre-reloc;
+};
+
+&pioA {
+ u-boot,dm-pre-reloc;
+};
+
+&pioB {
+ u-boot,dm-pre-reloc;
+};
+
+&pit64b0 {
+ u-boot,dm-pre-reloc;
+};
+
+&pmc {
+ u-boot,dm-pre-reloc;
+};
+
+&sdhci0 {
+ u-boot,dm-pre-reloc;
+};
+
+&slow_rc_osc {
+ u-boot,dm-pre-reloc;
+};
+
+&slow_xtal {
+ u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/at91-sam9x60_curiosity.dts b/arch/arm/dts/at91-sam9x60_curiosity.dts
new file mode 100644
index 0000000000..2e7ccb0ffb
--- /dev/null
+++ b/arch/arm/dts/at91-sam9x60_curiosity.dts
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sam9x60_curiosity.dts - Device Tree file for SAM9X60 CURIOSITY board
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Durai Manickam KR <durai.manickamkr@microchip.com>
+ */
+/dts-v1/;
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include "sam9x60.dtsi"
+
+/ {
+ model = "Microchip SAM9X60 CURIOSITY";
+ compatible = "microchip,sam9x60-curiosity", "microchip,sam9x60", "atmel,at91sam9";
+
+ ahb {
+ apb {
+ flx0: flexcom@f801c600 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+ status = "okay";
+
+ i2c@600 {
+ compatible = "atmel,sama5d2-i2c";
+ reg = <0x600 0x200>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flx0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+ status = "okay";
+
+ eeprom@53 {
+ compatible = "atmel,24c32";
+ reg = <0x53>;
+ pagesize = <16>;
+ };
+ };
+ };
+
+ pinctrl {
+ pinctrl_flx0: flx0_default {
+ atmel,pins =
+ <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
+ };
+ };
+
+ chosen {
+ stdout-path = &dbgu;
+ i2c0 = &flx0;
+ };
+
+ clocks {
+ slow_xtal: slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal: main_xtal {
+ clock-frequency = <24000000>;
+ };
+ };
+
+ memory {
+ reg = <0x20000000 0x8000000>;
+ };
+};
+
+&macb0 {
+ phy-mode = "rmii";
+ status = "okay";
+};
--
2.25.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 3/4] configs: Add sam9x60_curiosity_mmc_defconfig
2022-03-21 10:34 [PATCH 0/4] Add support for sam9x60_curiosity Durai Manickam KR
2022-03-21 10:34 ` [PATCH 1/4] board: Add sam9x60_curiosity support Durai Manickam KR
2022-03-21 10:34 ` [PATCH 2/4] ARM: dts: Add device tree files for sam9x60_curiosity Durai Manickam KR
@ 2022-03-21 10:34 ` Durai Manickam KR
2022-03-21 10:34 ` [PATCH 4/4] configs: Add sam9x60_curiosity_nandflash_defconfig Durai Manickam KR
3 siblings, 0 replies; 8+ messages in thread
From: Durai Manickam KR @ 2022-03-21 10:34 UTC (permalink / raw)
To: u-boot; +Cc: durai.manickamkr, MPUSWLinux, Eugen.Hristev
Add boot from SDMMC (sdcard) support for sam9x60_curiosity.
Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
---
board/atmel/sam9x60_curiosity/MAINTAINERS | 1 +
configs/sam9x60_curiosity_mmc_defconfig | 82 +++++++++++++++++++++++
2 files changed, 83 insertions(+)
create mode 100644 configs/sam9x60_curiosity_mmc_defconfig
diff --git a/board/atmel/sam9x60_curiosity/MAINTAINERS b/board/atmel/sam9x60_curiosity/MAINTAINERS
index 84a3a9f186..3e1dce2980 100644
--- a/board/atmel/sam9x60_curiosity/MAINTAINERS
+++ b/board/atmel/sam9x60_curiosity/MAINTAINERS
@@ -4,3 +4,4 @@ M: Eugen Hristev <eugen.hristev@microchip.com>
S: Maintained
F: board/atmel/sam9x60_curiosity/
F: include/configs/sam9x60_curiosity.h
+F: configs/sam9x60_curiosity_mmc_defconfig
diff --git a/configs/sam9x60_curiosity_mmc_defconfig b/configs/sam9x60_curiosity_mmc_defconfig
new file mode 100644
index 0000000000..475f06a0c3
--- /dev/null
+++ b/configs/sam9x60_curiosity_mmc_defconfig
@@ -0,0 +1,82 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_ARCH_AT91=y
+CONFIG_SYS_TEXT_BASE=0x23f00000
+CONFIG_SYS_MALLOC_LEN=0x81000
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_TARGET_SAM9X60_CURIOSITY=y
+CONFIG_ATMEL_LEGACY=y
+CONFIG_NR_DRAM_BANKS=8
+CONFIG_ENV_SIZE=0x4000
+CONFIG_DM_GPIO=y
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_BASE=0xfffff200
+CONFIG_DEBUG_UART_CLOCK=200000000
+CONFIG_DEFAULT_DEVICE_TREE="at91-sam9x60_curiosity"
+CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
+CONFIG_FIT=y
+CONFIG_SD_BOOT=y
+CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="mem=128M console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="fatload mmc 0:1 0x21000000 at91-sam9x60_curiosity.dtb; fatload mmc 0:1 0x22000000 zImage; bootz 0x22000000 - 0x21000000"
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_MISC_INIT_R=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="U-Boot> "
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DM=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_NAND_TRIMFFS=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_HASH=y
+CONFIG_HASH_VERIFY=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_UBI=y
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_FAT=y
+CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_DM=y
+CONFIG_CLK=y
+CONFIG_CLK_CCF=y
+CONFIG_CLK_AT91=y
+CONFIG_AT91_GENERIC_CLK=y
+CONFIG_AT91_SAM9X60_PLL=y
+CONFIG_CPU=y
+CONFIG_AT91_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_AT91=y
+CONFIG_I2C_EEPROM=y
+CONFIG_MICROCHIP_FLEXCOM=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ATMEL=y
+CONFIG_MTD=y
+# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_ATMEL=y
+CONFIG_ATMEL_NAND_HW_PMECC=y
+CONFIG_PMECC_CAP=8
+CONFIG_PHY_MICREL=y
+CONFIG_DM_ETH=y
+CONFIG_MACB=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_ATMEL_USART=y
+CONFIG_TIMER=y
+CONFIG_MCHP_PIT64B_TIMER=y
+CONFIG_OF_LIBFDT_OVERLAY=y
--
2.25.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 4/4] configs: Add sam9x60_curiosity_nandflash_defconfig
2022-03-21 10:34 [PATCH 0/4] Add support for sam9x60_curiosity Durai Manickam KR
` (2 preceding siblings ...)
2022-03-21 10:34 ` [PATCH 3/4] configs: Add sam9x60_curiosity_mmc_defconfig Durai Manickam KR
@ 2022-03-21 10:34 ` Durai Manickam KR
3 siblings, 0 replies; 8+ messages in thread
From: Durai Manickam KR @ 2022-03-21 10:34 UTC (permalink / raw)
To: u-boot; +Cc: durai.manickamkr, MPUSWLinux, Eugen.Hristev
Add boot from NAND flash support for sam9x60_curiosity.
Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
---
board/atmel/sam9x60_curiosity/MAINTAINERS | 1 +
configs/sam9x60_curiosity_nandflash_defconfig | 82 +++++++++++++++++++
2 files changed, 83 insertions(+)
create mode 100644 configs/sam9x60_curiosity_nandflash_defconfig
diff --git a/board/atmel/sam9x60_curiosity/MAINTAINERS b/board/atmel/sam9x60_curiosity/MAINTAINERS
index 3e1dce2980..63e34cee07 100644
--- a/board/atmel/sam9x60_curiosity/MAINTAINERS
+++ b/board/atmel/sam9x60_curiosity/MAINTAINERS
@@ -5,3 +5,4 @@ S: Maintained
F: board/atmel/sam9x60_curiosity/
F: include/configs/sam9x60_curiosity.h
F: configs/sam9x60_curiosity_mmc_defconfig
+F: configs/sam9x60_curiosity_nandflash_defconfig
diff --git a/configs/sam9x60_curiosity_nandflash_defconfig b/configs/sam9x60_curiosity_nandflash_defconfig
new file mode 100644
index 0000000000..aa88ff5336
--- /dev/null
+++ b/configs/sam9x60_curiosity_nandflash_defconfig
@@ -0,0 +1,82 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_ARCH_AT91=y
+CONFIG_SYS_TEXT_BASE=0x23f00000
+CONFIG_SYS_MALLOC_LEN=0x81000
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_TARGET_SAM9X60_CURIOSITY=y
+CONFIG_ATMEL_LEGACY=y
+CONFIG_NR_DRAM_BANKS=8
+CONFIG_DM_GPIO=y
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_BASE=0xfffff200
+CONFIG_DEBUG_UART_CLOCK=200000000
+CONFIG_ENV_OFFSET_REDUND=0x100000
+CONFIG_DEFAULT_DEVICE_TREE="at91-sam9x60_curiosity"
+CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
+CONFIG_FIT=y
+CONFIG_NAND_BOOT=y
+CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256k(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=12 root=ubi0:rootfs rw"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="nand read 0x22000000 0x200000 0x600000; nand read 0x21000000 0x180000 0x20000; bootz 0x22000000 - 0x21000000"
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_MISC_INIT_R=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="U-Boot> "
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DM=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_NAND_TRIMFFS=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_HASH=y
+CONFIG_HASH_VERIFY=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_UBI=y
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_NAND=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_DM=y
+CONFIG_CLK=y
+CONFIG_CLK_CCF=y
+CONFIG_CLK_AT91=y
+CONFIG_AT91_GENERIC_CLK=y
+CONFIG_AT91_SAM9X60_PLL=y
+CONFIG_CPU=y
+CONFIG_AT91_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_AT91=y
+CONFIG_I2C_EEPROM=y
+CONFIG_MICROCHIP_FLEXCOM=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ATMEL=y
+CONFIG_MTD=y
+# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_ATMEL=y
+CONFIG_ATMEL_NAND_HW_PMECC=y
+CONFIG_PMECC_CAP=8
+CONFIG_PHY_MICREL=y
+CONFIG_DM_ETH=y
+CONFIG_MACB=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_ATMEL_USART=y
+CONFIG_TIMER=y
+CONFIG_MCHP_PIT64B_TIMER=y
+CONFIG_OF_LIBFDT_OVERLAY=y
--
2.25.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 1/4] board: Add sam9x60_curiosity support
2022-03-21 10:34 ` [PATCH 1/4] board: Add sam9x60_curiosity support Durai Manickam KR
@ 2022-03-21 16:32 ` Eugen.Hristev
2022-03-22 8:58 ` Durai.ManickamKR
0 siblings, 1 reply; 8+ messages in thread
From: Eugen.Hristev @ 2022-03-21 16:32 UTC (permalink / raw)
To: Durai.ManickamKR, u-boot; +Cc: MPUSWLinux
On 3/21/22 12:34 PM, Durai Manickam KR wrote:
> Add board files, Kconfig, Makefile and MAINTAINERS.
>
> Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
> ---
> arch/arm/mach-at91/Kconfig | 10 ++
> board/atmel/sam9x60_curiosity/Kconfig | 15 ++
> board/atmel/sam9x60_curiosity/MAINTAINERS | 6 +
> board/atmel/sam9x60_curiosity/Makefile | 7 +
> .../sam9x60_curiosity/sam9x60_curiosity.c | 139 ++++++++++++++++++
> include/configs/sam9x60_curiosity.h | 67 +++++++++
> 6 files changed, 244 insertions(+)
> create mode 100644 board/atmel/sam9x60_curiosity/Kconfig
> create mode 100644 board/atmel/sam9x60_curiosity/MAINTAINERS
> create mode 100644 board/atmel/sam9x60_curiosity/Makefile
> create mode 100644 board/atmel/sam9x60_curiosity/sam9x60_curiosity.c
> create mode 100644 include/configs/sam9x60_curiosity.h
>
> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
> index 00f31045d6..7a1dbff069 100644
> --- a/arch/arm/mach-at91/Kconfig
> +++ b/arch/arm/mach-at91/Kconfig
> @@ -161,6 +161,12 @@ config TARGET_SAM9X60EK
> select BOARD_EARLY_INIT_F
> select BOARD_LATE_INIT
>
> +config TARGET_SAM9X60_CURIOSITY
> + bool "SAM9X60 CURIOSITY board"
> + select SAM9X60
> + select BOARD_EARLY_INIT_F
> + select BOARD_LATE_INIT
> +
> config TARGET_SAMA5D2_PTC_EK
> bool "SAMA5D2 PTC EK board"
> select BOARD_EARLY_INIT_F
> @@ -310,6 +316,9 @@ config AT91_EFLASH
> Enable the driver for the embedded flash used in the Atmel
> AT91SAM9XE devices.
>
> +config ATMEL_LEGACY
> + bool "Legacy GPIO support"
> +
Hello Durai,
ATMEL_LEGACY has been previously converted to Kconfig with this commit :
https://source.denx.de/u-boot/custodians/u-boot-at91/-/commit/cb81640011270dae6346979ef36264a72cf3b565
So please rebase your series on top of u-boot/next or u-boot-at91/next
which is created on top of next and includes patches for the next u-boot
merge window.
Thank you !
> source "board/atmel/at91sam9260ek/Kconfig"
> source "board/atmel/at91sam9261ek/Kconfig"
> source "board/atmel/at91sam9263ek/Kconfig"
> @@ -318,6 +327,7 @@ source "board/atmel/at91sam9n12ek/Kconfig"
> source "board/atmel/at91sam9rlek/Kconfig"
> source "board/atmel/at91sam9x5ek/Kconfig"
> source "board/atmel/sam9x60ek/Kconfig"
> +source "board/atmel/sam9x60_curiosity/Kconfig"
> source "board/atmel/sama7g5ek/Kconfig"
> source "board/atmel/sama5d2_ptc_ek/Kconfig"
> source "board/atmel/sama5d2_xplained/Kconfig"
> diff --git a/board/atmel/sam9x60_curiosity/Kconfig b/board/atmel/sam9x60_curiosity/Kconfig
> new file mode 100644
> index 0000000000..ae84e0f32c
> --- /dev/null
> +++ b/board/atmel/sam9x60_curiosity/Kconfig
> @@ -0,0 +1,15 @@
> +if TARGET_SAM9X60_CURIOSITY
> +
> +config SYS_BOARD
> + default "sam9x60_curiosity"
> +
> +config SYS_VENDOR
> + default "atmel"
> +
> +config SYS_SOC
> + default "at91"
> +
> +config SYS_CONFIG_NAME
> + default "sam9x60_curiosity"
> +
> +endif
> diff --git a/board/atmel/sam9x60_curiosity/MAINTAINERS b/board/atmel/sam9x60_curiosity/MAINTAINERS
> new file mode 100644
> index 0000000000..84a3a9f186
> --- /dev/null
> +++ b/board/atmel/sam9x60_curiosity/MAINTAINERS
> @@ -0,0 +1,6 @@
> +SAM9X60 CURIOSITY BOARD
> +M: Durai Manickam KR <durai.manickamkr@microchip.com>
> +M: Eugen Hristev <eugen.hristev@microchip.com>
> +S: Maintained
> +F: board/atmel/sam9x60_curiosity/
> +F: include/configs/sam9x60_curiosity.h
> diff --git a/board/atmel/sam9x60_curiosity/Makefile b/board/atmel/sam9x60_curiosity/Makefile
> new file mode 100644
> index 0000000000..c4d17e66d4
> --- /dev/null
> +++ b/board/atmel/sam9x60_curiosity/Makefile
> @@ -0,0 +1,7 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +# Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
> +#
> +# Author: Durai Manickam KR <durai.manickamkr@microchip.com>
> +
> +obj-y += sam9x60_curiosity.o
> diff --git a/board/atmel/sam9x60_curiosity/sam9x60_curiosity.c b/board/atmel/sam9x60_curiosity/sam9x60_curiosity.c
> new file mode 100644
> index 0000000000..3c5470b03c
> --- /dev/null
> +++ b/board/atmel/sam9x60_curiosity/sam9x60_curiosity.c
> @@ -0,0 +1,139 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
> + *
> + * Author: Durai Manickam KR <durai.manickamkr@microchip.com>
> + */
> +
> +#include <common.h>
> +#include <debug_uart.h>
> +#include <fdtdec.h>
> +#include <init.h>
> +#include <asm/arch/at91_common.h>
> +#include <asm/arch/at91_rstc.h>
> +#include <asm/arch/at91_sfr.h>
> +#include <asm/arch/at91sam9_smc.h>
> +#include <asm/arch/clk.h>
> +#include <asm/arch/gpio.h>
> +#include <asm/global_data.h>
> +#include <asm/io.h>
> +#include <asm/mach-types.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +void at91_prepare_cpu_var(void);
> +
> +#ifdef CONFIG_CMD_NAND
> +static void sam9x60_curiosity_nand_hw_init(void)
> +{
> + struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
> + struct atmel_sfr *sfr = (struct atmel_sfr *)ATMEL_BASE_SFR;
> + unsigned int csa;
> +
> + at91_pio3_set_a_periph(AT91_PIO_PORTD, 0, 1); /* NAND OE */
> + at91_pio3_set_a_periph(AT91_PIO_PORTD, 1, 1); /* NAND WE */
> + at91_pio3_set_a_periph(AT91_PIO_PORTD, 2, 0); /* NAND ALE */
> + at91_pio3_set_a_periph(AT91_PIO_PORTD, 3, 0); /* NAND CLE */
> + /* Enable NandFlash */
> + at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
> + /* Configure RDY/BSY */
> + at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
> + at91_pio3_set_a_periph(AT91_PIO_PORTD, 6, 1);
> + at91_pio3_set_a_periph(AT91_PIO_PORTD, 7, 1);
> + at91_pio3_set_a_periph(AT91_PIO_PORTD, 8, 1);
> + at91_pio3_set_a_periph(AT91_PIO_PORTD, 9, 1);
> + at91_pio3_set_a_periph(AT91_PIO_PORTD, 10, 1);
> + at91_pio3_set_a_periph(AT91_PIO_PORTD, 11, 1);
> + at91_pio3_set_a_periph(AT91_PIO_PORTD, 12, 1);
> + at91_pio3_set_a_periph(AT91_PIO_PORTD, 13, 1);
> +
> + at91_periph_clk_enable(ATMEL_ID_PIOD);
> +
> + /* Enable CS3 */
> + csa = readl(&sfr->ebicsa);
> + csa |= AT91_SFR_CCFG_EBI_CSA(3, 1) | AT91_SFR_CCFG_NFD0_ON_D16;
> +
> + /* Configure IO drive */
> + csa &= ~AT91_SFR_CCFG_EBI_DRIVE_SAM9X60;
> +
> + writel(csa, &sfr->ebicsa);
> +
> + /* Configure SMC CS3 for NAND/SmartMedia */
> + writel(AT91_SMC_SETUP_NWE(4), &smc->cs[3].setup);
> +
> + writel(AT91_SMC_PULSE_NWE(10) | AT91_SMC_PULSE_NCS_WR(20) |
> + AT91_SMC_PULSE_NRD(10) | AT91_SMC_PULSE_NCS_RD(20),
> + &smc->cs[3].pulse);
> +
> + writel(AT91_SMC_CYCLE_NWE(20) | AT91_SMC_CYCLE_NRD(20),
> + &smc->cs[3].cycle);
> +
> + writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
> +#ifdef CONFIG_SYS_NAND_DBW_16
> + AT91_SMC_MODE_DBW_16 |
> +#else /* CONFIG_SYS_NAND_DBW_8 */
> + AT91_SMC_MODE_DBW_8 |
> +#endif
> + AT91_SMC_MODE_TDF | AT91_SMC_MODE_TDF_CYCLE(15),
> + &smc->cs[3].mode);
> +}
> +#endif
> +
> +#ifdef CONFIG_BOARD_LATE_INIT
> +int board_late_init(void)
> +{
> + at91_prepare_cpu_var();
> +
> + return 0;
> +}
> +#endif
> +
> +#ifdef CONFIG_DEBUG_UART_BOARD_INIT
> +void board_debug_uart_init(void)
> +{
> + at91_seriald_hw_init();
> +}
> +#endif
> +
> +#ifdef CONFIG_BOARD_EARLY_INIT_F
> +int board_early_init_f(void)
> +{
> +#ifdef CONFIG_DEBUG_UART
> + debug_uart_init();
> +#endif
> + return 0;
> +}
> +#endif
> +
> +#define MAC24AA_MAC_OFFSET 0xfa
> +
> +#ifdef CONFIG_MISC_INIT_R
> +int misc_init_r(void)
> +{
> +#ifdef CONFIG_I2C_EEPROM
> + at91_set_ethaddr(MAC24AA_MAC_OFFSET);
> +#endif
> + return 0;
> +}
> +#endif
> +
> +int board_init(void)
> +{
> + /* address of boot parameters */
> + gd->bd->bi_boot_params = gd->bd->bi_dram[0].start + 0x100;
> +
> +#ifdef CONFIG_CMD_NAND
> + sam9x60_curiosity_nand_hw_init();
> +#endif
> + return 0;
> +}
> +
> +int dram_init_banksize(void)
> +{
> + return fdtdec_setup_memory_banksize();
> +}
> +
> +int dram_init(void)
> +{
> + return fdtdec_setup_mem_size_base();
> +}
> diff --git a/include/configs/sam9x60_curiosity.h b/include/configs/sam9x60_curiosity.h
> new file mode 100644
> index 0000000000..4ec380ee54
> --- /dev/null
> +++ b/include/configs/sam9x60_curiosity.h
> @@ -0,0 +1,67 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Configuration settings for the SAM9X60 CURIOSITY board.
> + *
> + * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
> + *
> + * Author: Durai Manickam KR <durai.manickamkr@microchip.com>
> + */
> +
> +#ifndef __CONFIG_H__
> +#define __CONFIG_H__
> +
> +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
> +#define CONFIG_SYS_AT91_MAIN_CLOCK 24000000 /* 24 MHz crystal */
> +
> +#define CONFIG_USART_BASE ATMEL_BASE_DBGU
> +#define CONFIG_USART_ID 0 /* ignored in arm */
> +
> +/*
> + * BOOTP options
> + */
> +#define CONFIG_BOOTP_BOOTFILESIZE
> +
> +/* SDRAM */
> +#define CONFIG_SYS_SDRAM_BASE 0x20000000
> +#define CONFIG_SYS_SDRAM_SIZE 0x8000000 /* 128 MB */
> +
> +#ifdef CONFIG_SPL_BUILD
> +#define CONFIG_SYS_INIT_SP_ADDR 0x218000
> +#else
> +#define CONFIG_SYS_INIT_SP_ADDR \
> + (CONFIG_SYS_SDRAM_BASE + 16 * 1024 + CONFIG_SYS_MALLOC_F_LEN - \
> + GENERATED_GBL_DATA_SIZE)
> +#endif
> +
> +/* NAND flash */
> +#ifdef CONFIG_CMD_NAND
> +#define CONFIG_SYS_MAX_NAND_DEVICE 1
> +#define CONFIG_SYS_NAND_BASE 0x40000000
> +#define CONFIG_SYS_NAND_MASK_ALE BIT(21)
> +#define CONFIG_SYS_NAND_MASK_CLE BIT(22)
> +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD4
> +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD5
> +#define CONFIG_SYS_NAND_ONFI_DETECTION
> +#endif
> +
> +#ifndef CONFIG_BOOTCOMMAND
> +#ifdef CONFIG_SD_BOOT
> +/* bootstrap + u-boot + env + linux in sd card */
> +#define CONFIG_BOOTCOMMAND "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART \
> + " 0x21000000 at91-sam9x60_curiosity.dtb;" \
> + "fatload mmc " \
> + CONFIG_ENV_FAT_DEVICE_AND_PART \
> + " 0x22000000 zImage;" \
> + "bootz 0x22000000 - 0x21000000"
> +#elif defined(CONFIG_NAND_BOOT)
> +/* bootstrap + u-boot + env + linux in nandflash */
> +#define CONFIG_BOOTCOMMAND "nand read " \
> + "0x22000000 0x200000 0x600000; " \
> + "nand read 0x21000000 0x180000 0x20000; " \
> + "bootz 0x22000000 - 0x21000000"
> +#else
> +#define CONFIG_BOOTCOMMAND "Place your bootcommand here"
> +#endif
> +#endif
> +
> +#endif
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/4] board: Add sam9x60_curiosity support
2022-03-21 16:32 ` Eugen.Hristev
@ 2022-03-22 8:58 ` Durai.ManickamKR
0 siblings, 0 replies; 8+ messages in thread
From: Durai.ManickamKR @ 2022-03-22 8:58 UTC (permalink / raw)
To: Eugen.Hristev, u-boot; +Cc: MPUSWLinux
On 21/03/22 22:02, Eugen Hristev - M18282 wrote:
> On 3/21/22 12:34 PM, Durai Manickam KR wrote:
>> Add board files, Kconfig, Makefile and MAINTAINERS.
>>
>> Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
>> ---
>> arch/arm/mach-at91/Kconfig | 10 ++
>> board/atmel/sam9x60_curiosity/Kconfig | 15 ++
>> board/atmel/sam9x60_curiosity/MAINTAINERS | 6 +
>> board/atmel/sam9x60_curiosity/Makefile | 7 +
>> .../sam9x60_curiosity/sam9x60_curiosity.c | 139 ++++++++++++++++++
>> include/configs/sam9x60_curiosity.h | 67 +++++++++
>> 6 files changed, 244 insertions(+)
>> create mode 100644 board/atmel/sam9x60_curiosity/Kconfig
>> create mode 100644 board/atmel/sam9x60_curiosity/MAINTAINERS
>> create mode 100644 board/atmel/sam9x60_curiosity/Makefile
>> create mode 100644 board/atmel/sam9x60_curiosity/sam9x60_curiosity.c
>> create mode 100644 include/configs/sam9x60_curiosity.h
>>
>> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
>> index 00f31045d6..7a1dbff069 100644
>> --- a/arch/arm/mach-at91/Kconfig
>> +++ b/arch/arm/mach-at91/Kconfig
>> @@ -161,6 +161,12 @@ config TARGET_SAM9X60EK
>> select BOARD_EARLY_INIT_F
>> select BOARD_LATE_INIT
>>
>> +config TARGET_SAM9X60_CURIOSITY
>> + bool "SAM9X60 CURIOSITY board"
>> + select SAM9X60
>> + select BOARD_EARLY_INIT_F
>> + select BOARD_LATE_INIT
>> +
>> config TARGET_SAMA5D2_PTC_EK
>> bool "SAMA5D2 PTC EK board"
>> select BOARD_EARLY_INIT_F
>> @@ -310,6 +316,9 @@ config AT91_EFLASH
>> Enable the driver for the embedded flash used in the Atmel
>> AT91SAM9XE devices.
>>
>> +config ATMEL_LEGACY
>> + bool "Legacy GPIO support"
>> +
>
> Hello Durai,
>
> ATMEL_LEGACY has been previously converted to Kconfig with this commit :
>
> https://source.denx.de/u-boot/custodians/u-boot-at91/-/commit/cb81640011270dae6346979ef36264a72cf3b565
>
> So please rebase your series on top of u-boot/next or u-boot-at91/next
> which is created on top of next and includes patches for the next u-boot
> merge window.
>
> Thank you !
>
Hello Eugen,
Thanks, I have sent patches on top of u-boot/next branch.
>> source "board/atmel/at91sam9260ek/Kconfig"
>> source "board/atmel/at91sam9261ek/Kconfig"
>> source "board/atmel/at91sam9263ek/Kconfig"
>> @@ -318,6 +327,7 @@ source "board/atmel/at91sam9n12ek/Kconfig"
>> source "board/atmel/at91sam9rlek/Kconfig"
>> source "board/atmel/at91sam9x5ek/Kconfig"
>> source "board/atmel/sam9x60ek/Kconfig"
>> +source "board/atmel/sam9x60_curiosity/Kconfig"
>> source "board/atmel/sama7g5ek/Kconfig"
>> source "board/atmel/sama5d2_ptc_ek/Kconfig"
>> source "board/atmel/sama5d2_xplained/Kconfig"
>> diff --git a/board/atmel/sam9x60_curiosity/Kconfig b/board/atmel/sam9x60_curiosity/Kconfig
>> new file mode 100644
>> index 0000000000..ae84e0f32c
>> --- /dev/null
>> +++ b/board/atmel/sam9x60_curiosity/Kconfig
>> @@ -0,0 +1,15 @@
>> +if TARGET_SAM9X60_CURIOSITY
>> +
>> +config SYS_BOARD
>> + default "sam9x60_curiosity"
>> +
>> +config SYS_VENDOR
>> + default "atmel"
>> +
>> +config SYS_SOC
>> + default "at91"
>> +
>> +config SYS_CONFIG_NAME
>> + default "sam9x60_curiosity"
>> +
>> +endif
>> diff --git a/board/atmel/sam9x60_curiosity/MAINTAINERS b/board/atmel/sam9x60_curiosity/MAINTAINERS
>> new file mode 100644
>> index 0000000000..84a3a9f186
>> --- /dev/null
>> +++ b/board/atmel/sam9x60_curiosity/MAINTAINERS
>> @@ -0,0 +1,6 @@
>> +SAM9X60 CURIOSITY BOARD
>> +M: Durai Manickam KR <durai.manickamkr@microchip.com>
>> +M: Eugen Hristev <eugen.hristev@microchip.com>
>> +S: Maintained
>> +F: board/atmel/sam9x60_curiosity/
>> +F: include/configs/sam9x60_curiosity.h
>> diff --git a/board/atmel/sam9x60_curiosity/Makefile b/board/atmel/sam9x60_curiosity/Makefile
>> new file mode 100644
>> index 0000000000..c4d17e66d4
>> --- /dev/null
>> +++ b/board/atmel/sam9x60_curiosity/Makefile
>> @@ -0,0 +1,7 @@
>> +# SPDX-License-Identifier: GPL-2.0+
>> +#
>> +# Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
>> +#
>> +# Author: Durai Manickam KR <durai.manickamkr@microchip.com>
>> +
>> +obj-y += sam9x60_curiosity.o
>> diff --git a/board/atmel/sam9x60_curiosity/sam9x60_curiosity.c b/board/atmel/sam9x60_curiosity/sam9x60_curiosity.c
>> new file mode 100644
>> index 0000000000..3c5470b03c
>> --- /dev/null
>> +++ b/board/atmel/sam9x60_curiosity/sam9x60_curiosity.c
>> @@ -0,0 +1,139 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
>> + *
>> + * Author: Durai Manickam KR <durai.manickamkr@microchip.com>
>> + */
>> +
>> +#include <common.h>
>> +#include <debug_uart.h>
>> +#include <fdtdec.h>
>> +#include <init.h>
>> +#include <asm/arch/at91_common.h>
>> +#include <asm/arch/at91_rstc.h>
>> +#include <asm/arch/at91_sfr.h>
>> +#include <asm/arch/at91sam9_smc.h>
>> +#include <asm/arch/clk.h>
>> +#include <asm/arch/gpio.h>
>> +#include <asm/global_data.h>
>> +#include <asm/io.h>
>> +#include <asm/mach-types.h>
>> +
>> +DECLARE_GLOBAL_DATA_PTR;
>> +
>> +void at91_prepare_cpu_var(void);
>> +
>> +#ifdef CONFIG_CMD_NAND
>> +static void sam9x60_curiosity_nand_hw_init(void)
>> +{
>> + struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
>> + struct atmel_sfr *sfr = (struct atmel_sfr *)ATMEL_BASE_SFR;
>> + unsigned int csa;
>> +
>> + at91_pio3_set_a_periph(AT91_PIO_PORTD, 0, 1); /* NAND OE */
>> + at91_pio3_set_a_periph(AT91_PIO_PORTD, 1, 1); /* NAND WE */
>> + at91_pio3_set_a_periph(AT91_PIO_PORTD, 2, 0); /* NAND ALE */
>> + at91_pio3_set_a_periph(AT91_PIO_PORTD, 3, 0); /* NAND CLE */
>> + /* Enable NandFlash */
>> + at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
>> + /* Configure RDY/BSY */
>> + at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
>> + at91_pio3_set_a_periph(AT91_PIO_PORTD, 6, 1);
>> + at91_pio3_set_a_periph(AT91_PIO_PORTD, 7, 1);
>> + at91_pio3_set_a_periph(AT91_PIO_PORTD, 8, 1);
>> + at91_pio3_set_a_periph(AT91_PIO_PORTD, 9, 1);
>> + at91_pio3_set_a_periph(AT91_PIO_PORTD, 10, 1);
>> + at91_pio3_set_a_periph(AT91_PIO_PORTD, 11, 1);
>> + at91_pio3_set_a_periph(AT91_PIO_PORTD, 12, 1);
>> + at91_pio3_set_a_periph(AT91_PIO_PORTD, 13, 1);
>> +
>> + at91_periph_clk_enable(ATMEL_ID_PIOD);
>> +
>> + /* Enable CS3 */
>> + csa = readl(&sfr->ebicsa);
>> + csa |= AT91_SFR_CCFG_EBI_CSA(3, 1) | AT91_SFR_CCFG_NFD0_ON_D16;
>> +
>> + /* Configure IO drive */
>> + csa &= ~AT91_SFR_CCFG_EBI_DRIVE_SAM9X60;
>> +
>> + writel(csa, &sfr->ebicsa);
>> +
>> + /* Configure SMC CS3 for NAND/SmartMedia */
>> + writel(AT91_SMC_SETUP_NWE(4), &smc->cs[3].setup);
>> +
>> + writel(AT91_SMC_PULSE_NWE(10) | AT91_SMC_PULSE_NCS_WR(20) |
>> + AT91_SMC_PULSE_NRD(10) | AT91_SMC_PULSE_NCS_RD(20),
>> + &smc->cs[3].pulse);
>> +
>> + writel(AT91_SMC_CYCLE_NWE(20) | AT91_SMC_CYCLE_NRD(20),
>> + &smc->cs[3].cycle);
>> +
>> + writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
>> +#ifdef CONFIG_SYS_NAND_DBW_16
>> + AT91_SMC_MODE_DBW_16 |
>> +#else /* CONFIG_SYS_NAND_DBW_8 */
>> + AT91_SMC_MODE_DBW_8 |
>> +#endif
>> + AT91_SMC_MODE_TDF | AT91_SMC_MODE_TDF_CYCLE(15),
>> + &smc->cs[3].mode);
>> +}
>> +#endif
>> +
>> +#ifdef CONFIG_BOARD_LATE_INIT
>> +int board_late_init(void)
>> +{
>> + at91_prepare_cpu_var();
>> +
>> + return 0;
>> +}
>> +#endif
>> +
>> +#ifdef CONFIG_DEBUG_UART_BOARD_INIT
>> +void board_debug_uart_init(void)
>> +{
>> + at91_seriald_hw_init();
>> +}
>> +#endif
>> +
>> +#ifdef CONFIG_BOARD_EARLY_INIT_F
>> +int board_early_init_f(void)
>> +{
>> +#ifdef CONFIG_DEBUG_UART
>> + debug_uart_init();
>> +#endif
>> + return 0;
>> +}
>> +#endif
>> +
>> +#define MAC24AA_MAC_OFFSET 0xfa
>> +
>> +#ifdef CONFIG_MISC_INIT_R
>> +int misc_init_r(void)
>> +{
>> +#ifdef CONFIG_I2C_EEPROM
>> + at91_set_ethaddr(MAC24AA_MAC_OFFSET);
>> +#endif
>> + return 0;
>> +}
>> +#endif
>> +
>> +int board_init(void)
>> +{
>> + /* address of boot parameters */
>> + gd->bd->bi_boot_params = gd->bd->bi_dram[0].start + 0x100;
>> +
>> +#ifdef CONFIG_CMD_NAND
>> + sam9x60_curiosity_nand_hw_init();
>> +#endif
>> + return 0;
>> +}
>> +
>> +int dram_init_banksize(void)
>> +{
>> + return fdtdec_setup_memory_banksize();
>> +}
>> +
>> +int dram_init(void)
>> +{
>> + return fdtdec_setup_mem_size_base();
>> +}
>> diff --git a/include/configs/sam9x60_curiosity.h b/include/configs/sam9x60_curiosity.h
>> new file mode 100644
>> index 0000000000..4ec380ee54
>> --- /dev/null
>> +++ b/include/configs/sam9x60_curiosity.h
>> @@ -0,0 +1,67 @@
>> +/* SPDX-License-Identifier: GPL-2.0+ */
>> +/*
>> + * Configuration settings for the SAM9X60 CURIOSITY board.
>> + *
>> + * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
>> + *
>> + * Author: Durai Manickam KR <durai.manickamkr@microchip.com>
>> + */
>> +
>> +#ifndef __CONFIG_H__
>> +#define __CONFIG_H__
>> +
>> +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
>> +#define CONFIG_SYS_AT91_MAIN_CLOCK 24000000 /* 24 MHz crystal */
>> +
>> +#define CONFIG_USART_BASE ATMEL_BASE_DBGU
>> +#define CONFIG_USART_ID 0 /* ignored in arm */
>> +
>> +/*
>> + * BOOTP options
>> + */
>> +#define CONFIG_BOOTP_BOOTFILESIZE
>> +
>> +/* SDRAM */
>> +#define CONFIG_SYS_SDRAM_BASE 0x20000000
>> +#define CONFIG_SYS_SDRAM_SIZE 0x8000000 /* 128 MB */
>> +
>> +#ifdef CONFIG_SPL_BUILD
>> +#define CONFIG_SYS_INIT_SP_ADDR 0x218000
>> +#else
>> +#define CONFIG_SYS_INIT_SP_ADDR \
>> + (CONFIG_SYS_SDRAM_BASE + 16 * 1024 + CONFIG_SYS_MALLOC_F_LEN - \
>> + GENERATED_GBL_DATA_SIZE)
>> +#endif
>> +
>> +/* NAND flash */
>> +#ifdef CONFIG_CMD_NAND
>> +#define CONFIG_SYS_MAX_NAND_DEVICE 1
>> +#define CONFIG_SYS_NAND_BASE 0x40000000
>> +#define CONFIG_SYS_NAND_MASK_ALE BIT(21)
>> +#define CONFIG_SYS_NAND_MASK_CLE BIT(22)
>> +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD4
>> +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD5
>> +#define CONFIG_SYS_NAND_ONFI_DETECTION
>> +#endif
>> +
>> +#ifndef CONFIG_BOOTCOMMAND
>> +#ifdef CONFIG_SD_BOOT
>> +/* bootstrap + u-boot + env + linux in sd card */
>> +#define CONFIG_BOOTCOMMAND "fatload mmc " CONFIG_ENV_FAT_DEVICE_AND_PART \
>> + " 0x21000000 at91-sam9x60_curiosity.dtb;" \
>> + "fatload mmc " \
>> + CONFIG_ENV_FAT_DEVICE_AND_PART \
>> + " 0x22000000 zImage;" \
>> + "bootz 0x22000000 - 0x21000000"
>> +#elif defined(CONFIG_NAND_BOOT)
>> +/* bootstrap + u-boot + env + linux in nandflash */
>> +#define CONFIG_BOOTCOMMAND "nand read " \
>> + "0x22000000 0x200000 0x600000; " \
>> + "nand read 0x21000000 0x180000 0x20000; " \
>> + "bootz 0x22000000 - 0x21000000"
>> +#else
>> +#define CONFIG_BOOTCOMMAND "Place your bootcommand here"
>> +#endif
>> +#endif
>> +
>> +#endif
>>
>
--
Regards,
Durai Manickam KR
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 4/4] configs: Add sam9x60_curiosity_nandflash_defconfig
2022-03-22 8:51 [PATCH 0/4] Add support for sam9x60_curiosity Durai Manickam KR
@ 2022-03-22 8:51 ` Durai Manickam KR
0 siblings, 0 replies; 8+ messages in thread
From: Durai Manickam KR @ 2022-03-22 8:51 UTC (permalink / raw)
To: u-boot; +Cc: durai.manickamkr, MPUSWLinux, Eugen.Hristev
Add boot from NAND flash support for sam9x60_curiosity.
Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
---
board/atmel/sam9x60_curiosity/MAINTAINERS | 1 +
configs/sam9x60_curiosity_nandflash_defconfig | 82 +++++++++++++++++++
2 files changed, 83 insertions(+)
create mode 100644 configs/sam9x60_curiosity_nandflash_defconfig
diff --git a/board/atmel/sam9x60_curiosity/MAINTAINERS b/board/atmel/sam9x60_curiosity/MAINTAINERS
index 3e1dce2980..63e34cee07 100644
--- a/board/atmel/sam9x60_curiosity/MAINTAINERS
+++ b/board/atmel/sam9x60_curiosity/MAINTAINERS
@@ -5,3 +5,4 @@ S: Maintained
F: board/atmel/sam9x60_curiosity/
F: include/configs/sam9x60_curiosity.h
F: configs/sam9x60_curiosity_mmc_defconfig
+F: configs/sam9x60_curiosity_nandflash_defconfig
diff --git a/configs/sam9x60_curiosity_nandflash_defconfig b/configs/sam9x60_curiosity_nandflash_defconfig
new file mode 100644
index 0000000000..aa88ff5336
--- /dev/null
+++ b/configs/sam9x60_curiosity_nandflash_defconfig
@@ -0,0 +1,82 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_ARCH_AT91=y
+CONFIG_SYS_TEXT_BASE=0x23f00000
+CONFIG_SYS_MALLOC_LEN=0x81000
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_TARGET_SAM9X60_CURIOSITY=y
+CONFIG_ATMEL_LEGACY=y
+CONFIG_NR_DRAM_BANKS=8
+CONFIG_DM_GPIO=y
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_BASE=0xfffff200
+CONFIG_DEBUG_UART_CLOCK=200000000
+CONFIG_ENV_OFFSET_REDUND=0x100000
+CONFIG_DEFAULT_DEVICE_TREE="at91-sam9x60_curiosity"
+CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
+CONFIG_FIT=y
+CONFIG_NAND_BOOT=y
+CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,768k(uboot)ro,256k(env_redundant),256k(env),512k(dtb),6M(kernel)ro,-(rootfs) rootfstype=ubifs ubi.mtd=12 root=ubi0:rootfs rw"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="nand read 0x22000000 0x200000 0x600000; nand read 0x21000000 0x180000 0x20000; bootz 0x22000000 - 0x21000000"
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_MISC_INIT_R=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="U-Boot> "
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DM=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_NAND_TRIMFFS=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_HASH=y
+CONFIG_HASH_VERIFY=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_UBI=y
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_NAND=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_DM=y
+CONFIG_CLK=y
+CONFIG_CLK_CCF=y
+CONFIG_CLK_AT91=y
+CONFIG_AT91_GENERIC_CLK=y
+CONFIG_AT91_SAM9X60_PLL=y
+CONFIG_CPU=y
+CONFIG_AT91_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_AT91=y
+CONFIG_I2C_EEPROM=y
+CONFIG_MICROCHIP_FLEXCOM=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ATMEL=y
+CONFIG_MTD=y
+# CONFIG_SYS_NAND_USE_FLASH_BBT is not set
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_ATMEL=y
+CONFIG_ATMEL_NAND_HW_PMECC=y
+CONFIG_PMECC_CAP=8
+CONFIG_PHY_MICREL=y
+CONFIG_DM_ETH=y
+CONFIG_MACB=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_ATMEL_USART=y
+CONFIG_TIMER=y
+CONFIG_MCHP_PIT64B_TIMER=y
+CONFIG_OF_LIBFDT_OVERLAY=y
--
2.25.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
end of thread, other threads:[~2022-03-22 11:24 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-03-21 10:34 [PATCH 0/4] Add support for sam9x60_curiosity Durai Manickam KR
2022-03-21 10:34 ` [PATCH 1/4] board: Add sam9x60_curiosity support Durai Manickam KR
2022-03-21 16:32 ` Eugen.Hristev
2022-03-22 8:58 ` Durai.ManickamKR
2022-03-21 10:34 ` [PATCH 2/4] ARM: dts: Add device tree files for sam9x60_curiosity Durai Manickam KR
2022-03-21 10:34 ` [PATCH 3/4] configs: Add sam9x60_curiosity_mmc_defconfig Durai Manickam KR
2022-03-21 10:34 ` [PATCH 4/4] configs: Add sam9x60_curiosity_nandflash_defconfig Durai Manickam KR
2022-03-22 8:51 [PATCH 0/4] Add support for sam9x60_curiosity Durai Manickam KR
2022-03-22 8:51 ` [PATCH 4/4] configs: Add sam9x60_curiosity_nandflash_defconfig Durai Manickam KR
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.