[PATCH 5.16 00/37] 5.16.17-rc1 review

[PATCH 5.16 00/37] 5.16.17-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.16.17 release.
There are 37 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Wed, 23 Mar 2022 13:32:09 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.17-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.16.17-rc1

Filipe Manana <fdmanana@suse.com>
    btrfs: skip reserved bytes warning on unmount after log cleanup failure

Kalle Valo <quic_kvalo@quicinc.com>
    Revert "ath10k: drop beacon and probe response which leak from other channel"

Vladimir Oltean <vladimir.oltean@nxp.com>
    Revert "arm64: dts: freescale: Fix 'interrupt-map' parent address cells"

Michael Petlan <mpetlan@redhat.com>
    perf symbols: Fix symbol size calculation condition

Arnd Bergmann <arnd@arndb.de>
    arm64: errata: avoid duplicate field initializer

Pavel Skripkin <paskripkin@gmail.com>
    Input: aiptek - properly check endpoint type

Matt Lupfer <mlupfer@ddn.com>
    scsi: mpt3sas: Page fault in reply q processing

Alan Stern <stern@rowland.harvard.edu>
    usb: usbtmc: Fix bug in pipe direction for control transfers

Alan Stern <stern@rowland.harvard.edu>
    usb: gadget: Fix use-after-free bug by not setting udc->dev.driver

Dan Carpenter <dan.carpenter@oracle.com>
    usb: gadget: rndis: prevent integer overflow in rndis_set_response()

Arnd Bergmann <arnd@arndb.de>
    arm64: fix clang warning about TRAMP_VALIAS

Ivan Vecera <ivecera@redhat.com>
    iavf: Fix hang during reboot/shutdown

Vladimir Oltean <vladimir.oltean@nxp.com>
    net: mscc: ocelot: fix backwards compatibility with single-chain tc-flower offload

Doug Berger <opendmb@gmail.com>
    net: bcmgenet: skip invalid partial checksums

Manish Chopra <manishc@marvell.com>
    bnx2x: fix built-in kernel driver load failure

Juerg Haefliger <juerg.haefliger@canonical.com>
    net: phy: mscc: Add MODULE_FIRMWARE macros

Miaoqian Lin <linmq006@gmail.com>
    net: dsa: Add missing of_node_put() in dsa_port_parse_of

Thomas Zimmermann <tzimmermann@suse.de>
    drm: Don't make DRM_PANEL_BRIDGE dependent on DRM_KMS_HELPERS

Nicolas Dichtel <nicolas.dichtel@6wind.com>
    net: handle ARPHRD_PIMREG in dev_is_mac_header_xmit()

Marek Vasut <marex@denx.de>
    drm/panel: simple: Fix Innolux G070Y2-L01 BPP settings

Christoph Niedermaier <cniedermaier@dh-electronics.com>
    drm/imx: parallel-display: Remove bus flags check in imx_pd_bridge_atomic_check()

Jiasheng Jiang <jiasheng@iscas.ac.cn>
    hv_netvsc: Add check for kvmalloc_array

Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
    iavf: Fix double free in iavf_reset_task

Maciej Fijalkowski <maciej.fijalkowski@intel.com>
    ice: fix NULL pointer dereference in ice_update_vsi_tx_ring_stats()

Jiasheng Jiang <jiasheng@iscas.ac.cn>
    atm: eni: Add check for dma_map_single

Hannes Reinecke <hare@suse.de>
    nvmet: revert "nvmet: make discovery NQN configurable"

Eric Dumazet <edumazet@google.com>
    net/packet: fix slab-out-of-bounds access in packet_recvmsg()

Kurt Cancemi <kurt@x64architecture.com>
    net: phy: marvell: Fix invalid comparison in the resume and suspend functions

Sabrina Dubroca <sd@queasysnail.net>
    esp6: fix check on ipv6_skip_exthdr's return value

Jiyong Park <jiyong@google.com>
    vsock: each transport cycles only on its own sockets

Niels Dossche <dossche.niels@gmail.com>
    alx: acquire mutex for alx_reinit in alx_change_mtu

Randy Dunlap <rdunlap@infradead.org>
    efi: fix return value of __setup handlers

Jocelyn Falempe <jfalempe@redhat.com>
    drm/mgag200: Fix PLL setup for g200wb and g200ew

Ming Lei <ming.lei@redhat.com>
    block: release rq qos structures for queue without disk

Guo Ziliang <guo.ziliang@zte.com.cn>
    mm: swap: get rid of livelock in swapin readahead

Joseph Qi <joseph.qi@linux.alibaba.com>
    ocfs2: fix crash when initialize filecheck kobj fails

Brian Masney <bmasney@redhat.com>
    crypto: qcom-rng - ensure buffer for generate is completely filled


-------------

Diffstat:

 Makefile                                         |  4 +--
 arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi   | 24 +++++++--------
 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi   | 24 +++++++--------
 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi   | 24 +++++++--------
 arch/arm64/include/asm/vectors.h                 |  4 +--
 arch/arm64/kernel/cpu_errata.c                   |  1 -
 block/blk-core.c                                 |  4 +++
 drivers/atm/eni.c                                |  2 ++
 drivers/crypto/qcom-rng.c                        | 17 ++++++-----
 drivers/firmware/efi/apple-properties.c          |  2 +-
 drivers/firmware/efi/efi.c                       |  2 +-
 drivers/gpu/drm/bridge/Kconfig                   |  2 +-
 drivers/gpu/drm/imx/parallel-display.c           |  8 -----
 drivers/gpu/drm/mgag200/mgag200_pll.c            |  6 ++--
 drivers/gpu/drm/panel/Kconfig                    |  1 +
 drivers/gpu/drm/panel/panel-simple.c             |  2 +-
 drivers/input/tablet/aiptek.c                    | 10 +++---
 drivers/net/ethernet/atheros/alx/main.c          |  5 ++-
 drivers/net/ethernet/broadcom/bnx2x/bnx2x.h      |  2 --
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c  | 28 ++++++++++-------
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 15 ++-------
 drivers/net/ethernet/broadcom/genet/bcmgenet.c   |  6 ++--
 drivers/net/ethernet/intel/iavf/iavf_main.c      | 15 ++++++++-
 drivers/net/ethernet/intel/ice/ice_main.c        |  5 +--
 drivers/net/ethernet/mscc/ocelot_flower.c        | 16 +++++++++-
 drivers/net/hyperv/netvsc_drv.c                  |  3 ++
 drivers/net/phy/marvell.c                        |  8 ++---
 drivers/net/phy/mscc/mscc_main.c                 |  3 ++
 drivers/net/wireless/ath/ath10k/wmi.c            | 27 +---------------
 drivers/nvme/target/configfs.c                   | 39 ------------------------
 drivers/nvme/target/core.c                       |  3 +-
 drivers/scsi/mpt3sas/mpt3sas_base.c              |  5 +--
 drivers/usb/class/usbtmc.c                       | 13 ++++++--
 drivers/usb/gadget/function/rndis.c              |  1 +
 drivers/usb/gadget/udc/core.c                    |  3 --
 drivers/vhost/vsock.c                            |  3 +-
 fs/btrfs/block-group.c                           | 26 ++++++++++++++--
 fs/btrfs/ctree.h                                 |  7 +++++
 fs/btrfs/tree-log.c                              | 23 ++++++++++++++
 fs/ocfs2/super.c                                 | 22 ++++++-------
 include/linux/if_arp.h                           |  1 +
 include/net/af_vsock.h                           |  3 +-
 mm/swap_state.c                                  |  2 +-
 net/dsa/dsa2.c                                   |  1 +
 net/ipv6/esp6.c                                  |  3 +-
 net/packet/af_packet.c                           | 11 ++++++-
 net/vmw_vsock/af_vsock.c                         |  9 ++++--
 net/vmw_vsock/virtio_transport.c                 |  7 +++--
 net/vmw_vsock/vmci_transport.c                   |  5 ++-
 tools/perf/util/symbol.c                         |  2 +-
 50 files changed, 253 insertions(+), 206 deletions(-)

[PATCH 5.16 01/37] crypto: qcom-rng - ensure buffer for generate is completely filled

[Greg Kroah-Hartman]

From: Brian Masney <bmasney@redhat.com>

commit a680b1832ced3b5fa7c93484248fd221ea0d614b upstream.

The generate function in struct rng_alg expects that the destination
buffer is completely filled if the function returns 0. qcom_rng_read()
can run into a situation where the buffer is partially filled with
randomness and the remaining part of the buffer is zeroed since
qcom_rng_generate() doesn't check the return value. This issue can
be reproduced by running the following from libkcapi:

    kcapi-rng -b 9000000 > OUTFILE

The generated OUTFILE will have three huge sections that contain all
zeros, and this is caused by the code where the test
'val & PRNG_STATUS_DATA_AVAIL' fails.

Let's fix this issue by ensuring that qcom_rng_read() always returns
with a full buffer if the function returns success. Let's also have
qcom_rng_generate() return the correct value.

Here's some statistics from the ent project
(https://www.fourmilab.ch/random/) that shows information about the
quality of the generated numbers:

    $ ent -c qcom-random-before
    Value Char Occurrences Fraction
      0           606748   0.067416
      1            33104   0.003678
      2            33001   0.003667
    ...
    253   �        32883   0.003654
    254   �        33035   0.003671
    255   �        33239   0.003693

    Total:       9000000   1.000000

    Entropy = 7.811590 bits per byte.

    Optimum compression would reduce the size
    of this 9000000 byte file by 2 percent.

    Chi square distribution for 9000000 samples is 9329962.81, and
    randomly would exceed this value less than 0.01 percent of the
    times.

    Arithmetic mean value of data bytes is 119.3731 (127.5 = random).
    Monte Carlo value for Pi is 3.197293333 (error 1.77 percent).
    Serial correlation coefficient is 0.159130 (totally uncorrelated =
    0.0).

Without this patch, the results of the chi-square test is 0.01%, and
the numbers are certainly not random according to ent's project page.
The results improve with this patch:

    $ ent -c qcom-random-after
    Value Char Occurrences Fraction
      0            35432   0.003937
      1            35127   0.003903
      2            35424   0.003936
    ...
    253   �        35201   0.003911
    254   �        34835   0.003871
    255   �        35368   0.003930

    Total:       9000000   1.000000

    Entropy = 7.999979 bits per byte.

    Optimum compression would reduce the size
    of this 9000000 byte file by 0 percent.

    Chi square distribution for 9000000 samples is 258.77, and randomly
    would exceed this value 42.24 percent of the times.

    Arithmetic mean value of data bytes is 127.5006 (127.5 = random).
    Monte Carlo value for Pi is 3.141277333 (error 0.01 percent).
    Serial correlation coefficient is 0.000468 (totally uncorrelated =
    0.0).

This change was tested on a Nexus 5 phone (msm8974 SoC).

Signed-off-by: Brian Masney <bmasney@redhat.com>
Fixes: ceec5f5b5988 ("crypto: qcom-rng - Add Qcom prng driver")
Cc: stable@vger.kernel.org # 4.19+
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/crypto/qcom-rng.c |   17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

--- a/drivers/crypto/qcom-rng.c
+++ b/drivers/crypto/qcom-rng.c
@@ -8,6 +8,7 @@
 #include <linux/clk.h>
 #include <linux/crypto.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
@@ -43,16 +44,19 @@ static int qcom_rng_read(struct qcom_rng
 {
 	unsigned int currsize = 0;
 	u32 val;
+	int ret;
 
 	/* read random data from hardware */
 	do {
-		val = readl_relaxed(rng->base + PRNG_STATUS);
-		if (!(val & PRNG_STATUS_DATA_AVAIL))
-			break;
+		ret = readl_poll_timeout(rng->base + PRNG_STATUS, val,
+					 val & PRNG_STATUS_DATA_AVAIL,
+					 200, 10000);
+		if (ret)
+			return ret;
 
 		val = readl_relaxed(rng->base + PRNG_DATA_OUT);
 		if (!val)
-			break;
+			return -EINVAL;
 
 		if ((max - currsize) >= WORD_SZ) {
 			memcpy(data, &val, WORD_SZ);
@@ -61,11 +65,10 @@ static int qcom_rng_read(struct qcom_rng
 		} else {
 			/* copy only remaining bytes */
 			memcpy(data, &val, max - currsize);
-			break;
 		}
 	} while (currsize < max);
 
-	return currsize;
+	return 0;
 }
 
 static int qcom_rng_generate(struct crypto_rng *tfm,
@@ -87,7 +90,7 @@ static int qcom_rng_generate(struct cryp
 	mutex_unlock(&rng->lock);
 	clk_disable_unprepare(rng->clk);
 
-	return 0;
+	return ret;
 }
 
 static int qcom_rng_seed(struct crypto_rng *tfm, const u8 *seed,

[PATCH 5.16 02/37] ocfs2: fix crash when initialize filecheck kobj fails

[Greg Kroah-Hartman]

From: Joseph Qi <joseph.qi@linux.alibaba.com>

commit 7b0b1332cfdb94489836b67d088a779699f8e47e upstream.

Once s_root is set, genric_shutdown_super() will be called if
fill_super() fails.  That means, we will call ocfs2_dismount_volume()
twice in such case, which can lead to kernel crash.

Fix this issue by initializing filecheck kobj before setting s_root.

Link: https://lkml.kernel.org/r/20220310081930.86305-1-joseph.qi@linux.alibaba.com
Fixes: 5f483c4abb50 ("ocfs2: add kobject for online file check")
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/ocfs2/super.c |   22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -1106,17 +1106,6 @@ static int ocfs2_fill_super(struct super
 		goto read_super_error;
 	}
 
-	root = d_make_root(inode);
-	if (!root) {
-		status = -ENOMEM;
-		mlog_errno(status);
-		goto read_super_error;
-	}
-
-	sb->s_root = root;
-
-	ocfs2_complete_mount_recovery(osb);
-
 	osb->osb_dev_kset = kset_create_and_add(sb->s_id, NULL,
 						&ocfs2_kset->kobj);
 	if (!osb->osb_dev_kset) {
@@ -1134,6 +1123,17 @@ static int ocfs2_fill_super(struct super
 		goto read_super_error;
 	}
 
+	root = d_make_root(inode);
+	if (!root) {
+		status = -ENOMEM;
+		mlog_errno(status);
+		goto read_super_error;
+	}
+
+	sb->s_root = root;
+
+	ocfs2_complete_mount_recovery(osb);
+
 	if (ocfs2_mount_local(osb))
 		snprintf(nodestr, sizeof(nodestr), "local");
 	else

[PATCH 5.16 03/37] mm: swap: get rid of livelock in swapin readahead

[Greg Kroah-Hartman]

From: Guo Ziliang <guo.ziliang@zte.com.cn>

commit 029c4628b2eb2ca969e9bf979b05dc18d8d5575e upstream.

In our testing, a livelock task was found.  Through sysrq printing, same
stack was found every time, as follows:

  __swap_duplicate+0x58/0x1a0
  swapcache_prepare+0x24/0x30
  __read_swap_cache_async+0xac/0x220
  read_swap_cache_async+0x58/0xa0
  swapin_readahead+0x24c/0x628
  do_swap_page+0x374/0x8a0
  __handle_mm_fault+0x598/0xd60
  handle_mm_fault+0x114/0x200
  do_page_fault+0x148/0x4d0
  do_translation_fault+0xb0/0xd4
  do_mem_abort+0x50/0xb0

The reason for the livelock is that swapcache_prepare() always returns
EEXIST, indicating that SWAP_HAS_CACHE has not been cleared, so that it
cannot jump out of the loop.  We suspect that the task that clears the
SWAP_HAS_CACHE flag never gets a chance to run.  We try to lower the
priority of the task stuck in a livelock so that the task that clears
the SWAP_HAS_CACHE flag will run.  The results show that the system
returns to normal after the priority is lowered.

In our testing, multiple real-time tasks are bound to the same core, and
the task in the livelock is the highest priority task of the core, so
the livelocked task cannot be preempted.

Although cond_resched() is used by __read_swap_cache_async, it is an
empty function in the preemptive system and cannot achieve the purpose
of releasing the CPU.  A high-priority task cannot release the CPU
unless preempted by a higher-priority task.  But when this task is
already the highest priority task on this core, other tasks will not be
able to be scheduled.  So we think we should replace cond_resched() with
schedule_timeout_uninterruptible(1), schedule_timeout_interruptible will
call set_current_state first to set the task state, so the task will be
removed from the running queue, so as to achieve the purpose of giving
up the CPU and prevent it from running in kernel mode for too long.

(akpm: ugly hack becomes uglier.  But it fixes the issue in a
backportable-to-stable fashion while we hopefully work on something
better)

Link: https://lkml.kernel.org/r/20220221111749.1928222-1-cgel.zte@gmail.com
Signed-off-by: Guo Ziliang <guo.ziliang@zte.com.cn>
Reported-by: Zeal Robot <zealci@zte.com.cn>
Reviewed-by: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Reviewed-by: Jiang Xuexin <jiang.xuexin@zte.com.cn>
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roger Quadros <rogerq@kernel.org>
Cc: Ziliang Guo <guo.ziliang@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/swap_state.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/mm/swap_state.c
+++ b/mm/swap_state.c
@@ -478,7 +478,7 @@ struct page *__read_swap_cache_async(swp
 		 * __read_swap_cache_async(), which has set SWAP_HAS_CACHE
 		 * in swap_map, but not yet added its page to swap cache.
 		 */
-		cond_resched();
+		schedule_timeout_uninterruptible(1);
 	}
 
 	/*

[PATCH 5.16 04/37] block: release rq qos structures for queue without disk

[Greg Kroah-Hartman]

From: Ming Lei <ming.lei@redhat.com>

commit daaca3522a8e67c46e39ef09c1d542e866f85f3b upstream.

blkcg_init_queue() may add rq qos structures to request queue, previously
blk_cleanup_queue() calls rq_qos_exit() to release them, but commit
8e141f9eb803 ("block: drain file system I/O on del_gendisk")
moves rq_qos_exit() into del_gendisk(), so memory leak is caused
because queues may not have disk, such as un-present scsi luns, nvme
admin queue, ...

Fixes the issue by adding rq_qos_exit() to blk_cleanup_queue() back.

BTW, v5.18 won't need this patch any more since we move
blkcg_init_queue()/blkcg_exit_queue() into disk allocation/release
handler, and patches have been in for-5.18/block.

Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Fixes: 8e141f9eb803 ("block: drain file system I/O on del_gendisk")
Reported-by: syzbot+b42749a851a47a0f581b@syzkaller.appspotmail.com
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220314043018.177141-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 block/blk-core.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -51,6 +51,7 @@
 #include "blk-mq-sched.h"
 #include "blk-pm.h"
 #include "blk-throttle.h"
+#include "blk-rq-qos.h"
 
 struct dentry *blk_debugfs_root;
 
@@ -354,6 +355,9 @@ void blk_cleanup_queue(struct request_qu
 	 */
 	blk_freeze_queue(q);
 
+	/* cleanup rq qos structures for queue without disk */
+	rq_qos_exit(q);
+
 	blk_queue_flag_set(QUEUE_FLAG_DEAD, q);
 
 	blk_sync_queue(q);

[PATCH 5.16 05/37] drm/mgag200: Fix PLL setup for g200wb and g200ew

[Greg Kroah-Hartman]

From: Jocelyn Falempe <jfalempe@redhat.com>

commit 40ce1121c1d76daf9048a86e36c83e469281b9fd upstream.

commit f86c3ed55920 ("drm/mgag200: Split PLL setup into compute and
 update functions") introduced a regression for g200wb and g200ew.
The PLLs are not set up properly, and VGA screen stays
black, or displays "out of range" message.

MGA1064_WB_PIX_PLLC_N/M/P was mistakenly replaced with
MGA1064_PIX_PLLC_N/M/P which have different addresses.

Patch tested on a Dell T310 with g200wb

Fixes: f86c3ed55920 ("drm/mgag200: Split PLL setup into compute and update functions")
Cc: stable@vger.kernel.org
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220308174321.225606-1-jfalempe@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/gpu/drm/mgag200/mgag200_pll.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/gpu/drm/mgag200/mgag200_pll.c
+++ b/drivers/gpu/drm/mgag200/mgag200_pll.c
@@ -404,9 +404,9 @@ mgag200_pixpll_update_g200wb(struct mgag
 		udelay(50);
 
 		/* program pixel pll register */
-		WREG_DAC(MGA1064_PIX_PLLC_N, xpixpllcn);
-		WREG_DAC(MGA1064_PIX_PLLC_M, xpixpllcm);
-		WREG_DAC(MGA1064_PIX_PLLC_P, xpixpllcp);
+		WREG_DAC(MGA1064_WB_PIX_PLLC_N, xpixpllcn);
+		WREG_DAC(MGA1064_WB_PIX_PLLC_M, xpixpllcm);
+		WREG_DAC(MGA1064_WB_PIX_PLLC_P, xpixpllcp);
 
 		udelay(50);
 

[PATCH 5.16 06/37] efi: fix return value of __setup handlers

[Greg Kroah-Hartman]

From: Randy Dunlap <rdunlap@infradead.org>

[ Upstream commit 9feaf8b387ee0ece9c1d7add308776b502a35d0c ]

When "dump_apple_properties" is used on the kernel boot command line,
it causes an Unknown parameter message and the string is added to init's
argument strings:

  Unknown kernel command line parameters "dump_apple_properties
    BOOT_IMAGE=/boot/bzImage-517rc6 efivar_ssdt=newcpu_ssdt", will be
    passed to user space.

 Run /sbin/init as init process
   with arguments:
     /sbin/init
     dump_apple_properties
   with environment:
     HOME=/
     TERM=linux
     BOOT_IMAGE=/boot/bzImage-517rc6
     efivar_ssdt=newcpu_ssdt

Similarly when "efivar_ssdt=somestring" is used, it is added to the
Unknown parameter message and to init's environment strings, polluting
them (see examples above).

Change the return value of the __setup functions to 1 to indicate
that the __setup options have been handled.

Fixes: 58c5475aba67 ("x86/efi: Retrieve and assign Apple device properties")
Fixes: 475fb4e8b2f4 ("efi / ACPI: load SSTDs from EFI variables")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: linux-efi@vger.kernel.org
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Octavian Purdila <octavian.purdila@intel.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Link: https://lore.kernel.org/r/20220301041851.12459-1-rdunlap@infradead.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/efi/apple-properties.c | 2 +-
 drivers/firmware/efi/efi.c              | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/firmware/efi/apple-properties.c b/drivers/firmware/efi/apple-properties.c
index 4c3201e290e2..ea84108035eb 100644
--- a/drivers/firmware/efi/apple-properties.c
+++ b/drivers/firmware/efi/apple-properties.c
@@ -24,7 +24,7 @@ static bool dump_properties __initdata;
 static int __init dump_properties_enable(char *arg)
 {
 	dump_properties = true;
-	return 0;
+	return 1;
 }
 
 __setup("dump_apple_properties", dump_properties_enable);
diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c
index 7de3f5b6e8d0..5502e176d51b 100644
--- a/drivers/firmware/efi/efi.c
+++ b/drivers/firmware/efi/efi.c
@@ -212,7 +212,7 @@ static int __init efivar_ssdt_setup(char *str)
 		memcpy(efivar_ssdt, str, strlen(str));
 	else
 		pr_warn("efivar_ssdt: name too long: %s\n", str);
-	return 0;
+	return 1;
 }
 __setup("efivar_ssdt=", efivar_ssdt_setup);
 
-- 
2.34.1

[PATCH 5.16 07/37] alx: acquire mutex for alx_reinit in alx_change_mtu

[Greg Kroah-Hartman]

From: Niels Dossche <dossche.niels@gmail.com>

[ Upstream commit 46b348fd2d81a341b15fb3f3f986204b038f5c42 ]

alx_reinit has a lockdep assertion that the alx->mtx mutex must be held.
alx_reinit is called from two places: alx_reset and alx_change_mtu.
alx_reset does acquire alx->mtx before calling alx_reinit.
alx_change_mtu does not acquire this mutex, nor do its callers or any
path towards alx_change_mtu.
Acquire the mutex in alx_change_mtu.

The issue was introduced when the fine-grained locking was introduced
to the code to replace the RTNL. The same commit also introduced the
lockdep assertion.

Fixes: 4a5fe57e7751 ("alx: use fine-grained locking instead of RTNL")
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Link: https://lore.kernel.org/r/20220310232707.44251-1-dossche.niels@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/atheros/alx/main.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/atheros/alx/main.c b/drivers/net/ethernet/atheros/alx/main.c
index 4ad3fc72e74e..a89b93cb4e26 100644
--- a/drivers/net/ethernet/atheros/alx/main.c
+++ b/drivers/net/ethernet/atheros/alx/main.c
@@ -1181,8 +1181,11 @@ static int alx_change_mtu(struct net_device *netdev, int mtu)
 	alx->hw.mtu = mtu;
 	alx->rxbuf_size = max(max_frame, ALX_DEF_RXBUF_SIZE);
 	netdev_update_features(netdev);
-	if (netif_running(netdev))
+	if (netif_running(netdev)) {
+		mutex_lock(&alx->mtx);
 		alx_reinit(alx);
+		mutex_unlock(&alx->mtx);
+	}
 	return 0;
 }
 
-- 
2.34.1

[PATCH 5.16 08/37] vsock: each transport cycles only on its own sockets

[Greg Kroah-Hartman]

From: Jiyong Park <jiyong@google.com>

[ Upstream commit 8e6ed963763fe21429eabfc76c69ce2b0163a3dd ]

When iterating over sockets using vsock_for_each_connected_socket, make
sure that a transport filters out sockets that don't belong to the
transport.

There actually was an issue caused by this; in a nested VM
configuration, destroying the nested VM (which often involves the
closing of /dev/vhost-vsock if there was h2g connections to the nested
VM) kills not only the h2g connections, but also all existing g2h
connections to the (outmost) host which are totally unrelated.

Tested: Executed the following steps on Cuttlefish (Android running on a
VM) [1]: (1) Enter into an `adb shell` session - to have a g2h
connection inside the VM, (2) open and then close /dev/vhost-vsock by
`exec 3< /dev/vhost-vsock && exec 3<&-`, (3) observe that the adb
session is not reset.

[1] https://android.googlesource.com/device/google/cuttlefish/

Fixes: c0cfa2d8a788 ("vsock: add multi-transports support")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jiyong Park <jiyong@google.com>
Link: https://lore.kernel.org/r/20220311020017.1509316-1-jiyong@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vhost/vsock.c            | 3 ++-
 include/net/af_vsock.h           | 3 ++-
 net/vmw_vsock/af_vsock.c         | 9 +++++++--
 net/vmw_vsock/virtio_transport.c | 7 +++++--
 net/vmw_vsock/vmci_transport.c   | 5 ++++-
 5 files changed, 20 insertions(+), 7 deletions(-)

diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c
index 37f0b4274113..e6c9d41db1de 100644
--- a/drivers/vhost/vsock.c
+++ b/drivers/vhost/vsock.c
@@ -753,7 +753,8 @@ static int vhost_vsock_dev_release(struct inode *inode, struct file *file)
 
 	/* Iterating over all connections for all CIDs to find orphans is
 	 * inefficient.  Room for improvement here. */
-	vsock_for_each_connected_socket(vhost_vsock_reset_orphans);
+	vsock_for_each_connected_socket(&vhost_transport.transport,
+					vhost_vsock_reset_orphans);
 
 	/* Don't check the owner, because we are in the release path, so we
 	 * need to stop the vsock device in any case.
diff --git a/include/net/af_vsock.h b/include/net/af_vsock.h
index ab207677e0a8..f742e50207fb 100644
--- a/include/net/af_vsock.h
+++ b/include/net/af_vsock.h
@@ -205,7 +205,8 @@ struct sock *vsock_find_bound_socket(struct sockaddr_vm *addr);
 struct sock *vsock_find_connected_socket(struct sockaddr_vm *src,
 					 struct sockaddr_vm *dst);
 void vsock_remove_sock(struct vsock_sock *vsk);
-void vsock_for_each_connected_socket(void (*fn)(struct sock *sk));
+void vsock_for_each_connected_socket(struct vsock_transport *transport,
+				     void (*fn)(struct sock *sk));
 int vsock_assign_transport(struct vsock_sock *vsk, struct vsock_sock *psk);
 bool vsock_find_cid(unsigned int cid);
 
diff --git a/net/vmw_vsock/af_vsock.c b/net/vmw_vsock/af_vsock.c
index 8e4f2a1346be..782aa4209718 100644
--- a/net/vmw_vsock/af_vsock.c
+++ b/net/vmw_vsock/af_vsock.c
@@ -333,7 +333,8 @@ void vsock_remove_sock(struct vsock_sock *vsk)
 }
 EXPORT_SYMBOL_GPL(vsock_remove_sock);
 
-void vsock_for_each_connected_socket(void (*fn)(struct sock *sk))
+void vsock_for_each_connected_socket(struct vsock_transport *transport,
+				     void (*fn)(struct sock *sk))
 {
 	int i;
 
@@ -342,8 +343,12 @@ void vsock_for_each_connected_socket(void (*fn)(struct sock *sk))
 	for (i = 0; i < ARRAY_SIZE(vsock_connected_table); i++) {
 		struct vsock_sock *vsk;
 		list_for_each_entry(vsk, &vsock_connected_table[i],
-				    connected_table)
+				    connected_table) {
+			if (vsk->transport != transport)
+				continue;
+
 			fn(sk_vsock(vsk));
+		}
 	}
 
 	spin_unlock_bh(&vsock_table_lock);
diff --git a/net/vmw_vsock/virtio_transport.c b/net/vmw_vsock/virtio_transport.c
index 4f7c99dfd16c..dad9ca65f4f9 100644
--- a/net/vmw_vsock/virtio_transport.c
+++ b/net/vmw_vsock/virtio_transport.c
@@ -24,6 +24,7 @@
 static struct workqueue_struct *virtio_vsock_workqueue;
 static struct virtio_vsock __rcu *the_virtio_vsock;
 static DEFINE_MUTEX(the_virtio_vsock_mutex); /* protects the_virtio_vsock */
+static struct virtio_transport virtio_transport; /* forward declaration */
 
 struct virtio_vsock {
 	struct virtio_device *vdev;
@@ -384,7 +385,8 @@ static void virtio_vsock_event_handle(struct virtio_vsock *vsock,
 	switch (le32_to_cpu(event->id)) {
 	case VIRTIO_VSOCK_EVENT_TRANSPORT_RESET:
 		virtio_vsock_update_guest_cid(vsock);
-		vsock_for_each_connected_socket(virtio_vsock_reset_sock);
+		vsock_for_each_connected_socket(&virtio_transport.transport,
+						virtio_vsock_reset_sock);
 		break;
 	}
 }
@@ -662,7 +664,8 @@ static void virtio_vsock_remove(struct virtio_device *vdev)
 	synchronize_rcu();
 
 	/* Reset all connected sockets when the device disappear */
-	vsock_for_each_connected_socket(virtio_vsock_reset_sock);
+	vsock_for_each_connected_socket(&virtio_transport.transport,
+					virtio_vsock_reset_sock);
 
 	/* Stop all work handlers to make sure no one is accessing the device,
 	 * so we can safely call vdev->config->reset().
diff --git a/net/vmw_vsock/vmci_transport.c b/net/vmw_vsock/vmci_transport.c
index 7aef34e32bdf..b17dc9745188 100644
--- a/net/vmw_vsock/vmci_transport.c
+++ b/net/vmw_vsock/vmci_transport.c
@@ -75,6 +75,8 @@ static u32 vmci_transport_qp_resumed_sub_id = VMCI_INVALID_ID;
 
 static int PROTOCOL_OVERRIDE = -1;
 
+static struct vsock_transport vmci_transport; /* forward declaration */
+
 /* Helper function to convert from a VMCI error code to a VSock error code. */
 
 static s32 vmci_transport_error_to_vsock_error(s32 vmci_error)
@@ -882,7 +884,8 @@ static void vmci_transport_qp_resumed_cb(u32 sub_id,
 					 const struct vmci_event_data *e_data,
 					 void *client_data)
 {
-	vsock_for_each_connected_socket(vmci_transport_handle_detach);
+	vsock_for_each_connected_socket(&vmci_transport,
+					vmci_transport_handle_detach);
 }
 
 static void vmci_transport_recv_pkt_work(struct work_struct *work)
-- 
2.34.1

[PATCH 5.16 09/37] esp6: fix check on ipv6_skip_exthdrs return value

[Greg Kroah-Hartman]

From: Sabrina Dubroca <sd@queasysnail.net>

[ Upstream commit 4db4075f92af2b28f415fc979ab626e6b37d67b6 ]

Commit 5f9c55c8066b ("ipv6: check return value of ipv6_skip_exthdr")
introduced an incorrect check, which leads to all ESP packets over
either TCPv6 or UDPv6 encapsulation being dropped. In this particular
case, offset is negative, since skb->data points to the ESP header in
the following chain of headers, while skb->network_header points to
the IPv6 header:

    IPv6 | ext | ... | ext | UDP | ESP | ...

That doesn't seem to be a problem, especially considering that if we
reach esp6_input_done2, we're guaranteed to have a full set of headers
available (otherwise the packet would have been dropped earlier in the
stack). However, it means that the return value will (intentionally)
be negative. We can make the test more specific, as the expected
return value of ipv6_skip_exthdr will be the (negated) size of either
a UDP header, or a TCP header with possible options.

In the future, we should probably either make ipv6_skip_exthdr
explicitly accept negative offsets (and adjust its return value for
error cases), or make ipv6_skip_exthdr only take non-negative
offsets (and audit all callers).

Fixes: 5f9c55c8066b ("ipv6: check return value of ipv6_skip_exthdr")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/esp6.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/net/ipv6/esp6.c b/net/ipv6/esp6.c
index b7b573085bd5..5023f59a5b96 100644
--- a/net/ipv6/esp6.c
+++ b/net/ipv6/esp6.c
@@ -813,8 +813,7 @@ int esp6_input_done2(struct sk_buff *skb, int err)
 		struct tcphdr *th;
 
 		offset = ipv6_skip_exthdr(skb, offset, &nexthdr, &frag_off);
-
-		if (offset < 0) {
+		if (offset == -1) {
 			err = -EINVAL;
 			goto out;
 		}
-- 
2.34.1

[PATCH 5.16 10/37] net: phy: marvell: Fix invalid comparison in the resume and suspend functions

[Greg Kroah-Hartman]

From: Kurt Cancemi <kurt@x64architecture.com>

[ Upstream commit 837d9e49402eaf030db55a49f96fc51d73b4b441 ]

This bug resulted in only the current mode being resumed and suspended when
the PHY supported both fiber and copper modes and when the PHY only supported
copper mode the fiber mode would incorrectly be attempted to be resumed and
suspended.

Fixes: 3758be3dc162 ("Marvell phy: add functions to suspend and resume both interfaces: fiber and copper links.")
Signed-off-by: Kurt Cancemi <kurt@x64architecture.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220312201512.326047-1-kurt@x64architecture.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/marvell.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index cfda625dbea5..4d726ee03ce2 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -1693,8 +1693,8 @@ static int marvell_suspend(struct phy_device *phydev)
 	int err;
 
 	/* Suspend the fiber mode first */
-	if (!linkmode_test_bit(ETHTOOL_LINK_MODE_FIBRE_BIT,
-			       phydev->supported)) {
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_FIBRE_BIT,
+			      phydev->supported)) {
 		err = marvell_set_page(phydev, MII_MARVELL_FIBER_PAGE);
 		if (err < 0)
 			goto error;
@@ -1728,8 +1728,8 @@ static int marvell_resume(struct phy_device *phydev)
 	int err;
 
 	/* Resume the fiber mode first */
-	if (!linkmode_test_bit(ETHTOOL_LINK_MODE_FIBRE_BIT,
-			       phydev->supported)) {
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_FIBRE_BIT,
+			      phydev->supported)) {
 		err = marvell_set_page(phydev, MII_MARVELL_FIBER_PAGE);
 		if (err < 0)
 			goto error;
-- 
2.34.1

[PATCH 5.16 11/37] net/packet: fix slab-out-of-bounds access in packet_recvmsg()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit c700525fcc06b05adfea78039de02628af79e07a ]

syzbot found that when an AF_PACKET socket is using PACKET_COPY_THRESH
and mmap operations, tpacket_rcv() is queueing skbs with
garbage in skb->cb[], triggering a too big copy [1]

Presumably, users of af_packet using mmap() already gets correct
metadata from the mapped buffer, we can simply make sure
to clear 12 bytes that might be copied to user space later.

BUG: KASAN: stack-out-of-bounds in memcpy include/linux/fortify-string.h:225 [inline]
BUG: KASAN: stack-out-of-bounds in packet_recvmsg+0x56c/0x1150 net/packet/af_packet.c:3489
Write of size 165 at addr ffffc9000385fb78 by task syz-executor233/3631

CPU: 0 PID: 3631 Comm: syz-executor233 Not tainted 5.17.0-rc7-syzkaller-02396-g0b3660695e80 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 print_address_description.constprop.0.cold+0xf/0x336 mm/kasan/report.c:255
 __kasan_report mm/kasan/report.c:442 [inline]
 kasan_report.cold+0x83/0xdf mm/kasan/report.c:459
 check_region_inline mm/kasan/generic.c:183 [inline]
 kasan_check_range+0x13d/0x180 mm/kasan/generic.c:189
 memcpy+0x39/0x60 mm/kasan/shadow.c:66
 memcpy include/linux/fortify-string.h:225 [inline]
 packet_recvmsg+0x56c/0x1150 net/packet/af_packet.c:3489
 sock_recvmsg_nosec net/socket.c:948 [inline]
 sock_recvmsg net/socket.c:966 [inline]
 sock_recvmsg net/socket.c:962 [inline]
 ____sys_recvmsg+0x2c4/0x600 net/socket.c:2632
 ___sys_recvmsg+0x127/0x200 net/socket.c:2674
 __sys_recvmsg+0xe2/0x1a0 net/socket.c:2704
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fdfd5954c29
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffcf8e71e48 EFLAGS: 00000246 ORIG_RAX: 000000000000002f
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fdfd5954c29
RDX: 0000000000000000 RSI: 0000000020000500 RDI: 0000000000000005
RBP: 0000000000000000 R08: 000000000000000d R09: 000000000000000d
R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffcf8e71e60
R13: 00000000000f4240 R14: 000000000000c1ff R15: 00007ffcf8e71e54
 </TASK>

addr ffffc9000385fb78 is located in stack of task syz-executor233/3631 at offset 32 in frame:
 ____sys_recvmsg+0x0/0x600 include/linux/uio.h:246

this frame has 1 object:
 [32, 160) 'addr'

Memory state around the buggy address:
 ffffc9000385fa80: 00 04 f3 f3 f3 f3 f3 00 00 00 00 00 00 00 00 00
 ffffc9000385fb00: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00
>ffffc9000385fb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f3
                                                                ^
 ffffc9000385fc00: f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 f1
 ffffc9000385fc80: f1 f1 f1 00 f2 f2 f2 00 f2 f2 f2 00 00 00 00 00
==================================================================

Fixes: 0fb375fb9b93 ("[AF_PACKET]: Allow for > 8 byte hardware addresses.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Link: https://lore.kernel.org/r/20220312232958.3535620-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/packet/af_packet.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index fe9b4c04744a..92d180a0db5a 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -2316,8 +2316,11 @@ static int tpacket_rcv(struct sk_buff *skb, struct net_device *dev,
 					copy_skb = skb_get(skb);
 					skb_head = skb->data;
 				}
-				if (copy_skb)
+				if (copy_skb) {
+					memset(&PACKET_SKB_CB(copy_skb)->sa.ll, 0,
+					       sizeof(PACKET_SKB_CB(copy_skb)->sa.ll));
 					skb_set_owner_r(copy_skb, sk);
+				}
 			}
 			snaplen = po->rx_ring.frame_size - macoff;
 			if ((int)snaplen < 0) {
@@ -3469,6 +3472,8 @@ static int packet_recvmsg(struct socket *sock, struct msghdr *msg, size_t len,
 	sock_recv_ts_and_drops(msg, sk, skb);
 
 	if (msg->msg_name) {
+		const size_t max_len = min(sizeof(skb->cb),
+					   sizeof(struct sockaddr_storage));
 		int copy_len;
 
 		/* If the address length field is there to be filled
@@ -3491,6 +3496,10 @@ static int packet_recvmsg(struct socket *sock, struct msghdr *msg, size_t len,
 				msg->msg_namelen = sizeof(struct sockaddr_ll);
 			}
 		}
+		if (WARN_ON_ONCE(copy_len > max_len)) {
+			copy_len = max_len;
+			msg->msg_namelen = copy_len;
+		}
 		memcpy(msg->msg_name, &PACKET_SKB_CB(skb)->sa, copy_len);
 	}
 
-- 
2.34.1

[PATCH 5.16 12/37] nvmet: revert "nvmet: make discovery NQN configurable"

[Greg Kroah-Hartman]

From: Hannes Reinecke <hare@suse.de>

[ Upstream commit 0c48645a7f3988a624767d025fa3275ae24b6ca1 ]

Revert commit 626851e9225d ("nvmet: make discovery NQN configurable");
the interface was deemed incorrect and will be replaced with a different
one.

Fixes: 626851e9225d ("nvmet: make discovery NQN configurable")
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/configfs.c | 39 ----------------------------------
 drivers/nvme/target/core.c     |  3 +--
 2 files changed, 1 insertion(+), 41 deletions(-)

diff --git a/drivers/nvme/target/configfs.c b/drivers/nvme/target/configfs.c
index 091a0ca16361..496d775c6770 100644
--- a/drivers/nvme/target/configfs.c
+++ b/drivers/nvme/target/configfs.c
@@ -1233,44 +1233,6 @@ static ssize_t nvmet_subsys_attr_model_store(struct config_item *item,
 }
 CONFIGFS_ATTR(nvmet_subsys_, attr_model);
 
-static ssize_t nvmet_subsys_attr_discovery_nqn_show(struct config_item *item,
-			char *page)
-{
-	return snprintf(page, PAGE_SIZE, "%s\n",
-			nvmet_disc_subsys->subsysnqn);
-}
-
-static ssize_t nvmet_subsys_attr_discovery_nqn_store(struct config_item *item,
-			const char *page, size_t count)
-{
-	struct nvmet_subsys *subsys = to_subsys(item);
-	char *subsysnqn;
-	int len;
-
-	len = strcspn(page, "\n");
-	if (!len)
-		return -EINVAL;
-
-	subsysnqn = kmemdup_nul(page, len, GFP_KERNEL);
-	if (!subsysnqn)
-		return -ENOMEM;
-
-	/*
-	 * The discovery NQN must be different from subsystem NQN.
-	 */
-	if (!strcmp(subsysnqn, subsys->subsysnqn)) {
-		kfree(subsysnqn);
-		return -EBUSY;
-	}
-	down_write(&nvmet_config_sem);
-	kfree(nvmet_disc_subsys->subsysnqn);
-	nvmet_disc_subsys->subsysnqn = subsysnqn;
-	up_write(&nvmet_config_sem);
-
-	return count;
-}
-CONFIGFS_ATTR(nvmet_subsys_, attr_discovery_nqn);
-
 #ifdef CONFIG_BLK_DEV_INTEGRITY
 static ssize_t nvmet_subsys_attr_pi_enable_show(struct config_item *item,
 						char *page)
@@ -1300,7 +1262,6 @@ static struct configfs_attribute *nvmet_subsys_attrs[] = {
 	&nvmet_subsys_attr_attr_cntlid_min,
 	&nvmet_subsys_attr_attr_cntlid_max,
 	&nvmet_subsys_attr_attr_model,
-	&nvmet_subsys_attr_attr_discovery_nqn,
 #ifdef CONFIG_BLK_DEV_INTEGRITY
 	&nvmet_subsys_attr_attr_pi_enable,
 #endif
diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c
index 5119c687de68..626caf6f1e4b 100644
--- a/drivers/nvme/target/core.c
+++ b/drivers/nvme/target/core.c
@@ -1493,8 +1493,7 @@ static struct nvmet_subsys *nvmet_find_get_subsys(struct nvmet_port *port,
 	if (!port)
 		return NULL;
 
-	if (!strcmp(NVME_DISC_SUBSYS_NAME, subsysnqn) ||
-	    !strcmp(nvmet_disc_subsys->subsysnqn, subsysnqn)) {
+	if (!strcmp(NVME_DISC_SUBSYS_NAME, subsysnqn)) {
 		if (!kref_get_unless_zero(&nvmet_disc_subsys->ref))
 			return NULL;
 		return nvmet_disc_subsys;
-- 
2.34.1

[PATCH 5.16 13/37] atm: eni: Add check for dma_map_single

[Greg Kroah-Hartman]

From: Jiasheng Jiang <jiasheng@iscas.ac.cn>

[ Upstream commit 0f74b29a4f53627376cf5a5fb7b0b3fa748a0b2b ]

As the potential failure of the dma_map_single(),
it should be better to check it and return error
if fails.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/atm/eni.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/atm/eni.c b/drivers/atm/eni.c
index 422753d52244..a31ffe16e626 100644
--- a/drivers/atm/eni.c
+++ b/drivers/atm/eni.c
@@ -1112,6 +1112,8 @@ DPRINTK("iovcnt = %d\n",skb_shinfo(skb)->nr_frags);
 	skb_data3 = skb->data[3];
 	paddr = dma_map_single(&eni_dev->pci_dev->dev,skb->data,skb->len,
 			       DMA_TO_DEVICE);
+	if (dma_mapping_error(&eni_dev->pci_dev->dev, paddr))
+		return enq_next;
 	ENI_PRV_PADDR(skb) = paddr;
 	/* prepare DMA queue entries */
 	j = 0;
-- 
2.34.1

[PATCH 5.16 14/37] ice: fix NULL pointer dereference in ice_update_vsi_tx_ring_stats()

[Greg Kroah-Hartman]

From: Maciej Fijalkowski <maciej.fijalkowski@intel.com>

[ Upstream commit f153546913bada41a811722f2c6d17c3243a0333 ]

It is possible to do NULL pointer dereference in routine that updates
Tx ring stats. Currently only stats and bytes are updated when ring
pointer is valid, but later on ring is accessed to propagate gathered Tx
stats onto VSI stats.

Change the existing logic to move to next ring when ring is NULL.

Fixes: e72bba21355d ("ice: split ice_ring onto Tx/Rx separate structs")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_main.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 8a6c3716cdab..b449b3408a1c 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -5972,8 +5972,9 @@ ice_update_vsi_tx_ring_stats(struct ice_vsi *vsi,
 		u64 pkts = 0, bytes = 0;
 
 		ring = READ_ONCE(rings[i]);
-		if (ring)
-			ice_fetch_u64_stats_per_ring(&ring->syncp, ring->stats, &pkts, &bytes);
+		if (!ring)
+			continue;
+		ice_fetch_u64_stats_per_ring(&ring->syncp, ring->stats, &pkts, &bytes);
 		vsi_stats->tx_packets += pkts;
 		vsi_stats->tx_bytes += bytes;
 		vsi->tx_restart += ring->tx_stats.restart_q;
-- 
2.34.1

[PATCH 5.16 15/37] iavf: Fix double free in iavf_reset_task

[Greg Kroah-Hartman]

From: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>

[ Upstream commit 16b2dd8cdf6f4e0597c34899de74b4d012b78188 ]

Fix double free possibility in iavf_disable_vf, as crit_lock is
freed in caller, iavf_reset_task. Add kernel-doc for iavf_disable_vf.
Remove mutex_unlock in iavf_disable_vf.
Without this patch there is double free scenario, when calling
iavf_reset_task.

Fixes: e85ff9c631e1 ("iavf: Fix deadlock in iavf_reset_task")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/iavf/iavf_main.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c
index 138db07bdfa8..f2ce30366484 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_main.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_main.c
@@ -2133,6 +2133,13 @@ static void iavf_watchdog_task(struct work_struct *work)
 		queue_delayed_work(iavf_wq, &adapter->watchdog_task, HZ * 2);
 }
 
+/**
+ * iavf_disable_vf - disable VF
+ * @adapter: board private structure
+ *
+ * Set communication failed flag and free all resources.
+ * NOTE: This function is expected to be called with crit_lock being held.
+ **/
 static void iavf_disable_vf(struct iavf_adapter *adapter)
 {
 	struct iavf_mac_filter *f, *ftmp;
@@ -2187,7 +2194,6 @@ static void iavf_disable_vf(struct iavf_adapter *adapter)
 	memset(adapter->vf_res, 0, IAVF_VIRTCHNL_VF_RESOURCE_SIZE);
 	iavf_shutdown_adminq(&adapter->hw);
 	adapter->netdev->flags &= ~IFF_UP;
-	mutex_unlock(&adapter->crit_lock);
 	adapter->flags &= ~IAVF_FLAG_RESET_PENDING;
 	iavf_change_state(adapter, __IAVF_DOWN);
 	wake_up(&adapter->down_waitqueue);
-- 
2.34.1

[PATCH 5.16 16/37] hv_netvsc: Add check for kvmalloc_array

[Greg Kroah-Hartman]

From: Jiasheng Jiang <jiasheng@iscas.ac.cn>

[ Upstream commit 886e44c9298a6b428ae046e2fa092ca52e822e6a ]

As the potential failure of the kvmalloc_array(),
it should be better to check and restore the 'data'
if fails in order to avoid the dereference of the
NULL pointer.

Fixes: 6ae746711263 ("hv_netvsc: Add per-cpu ethtool stats for netvsc")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220314020125.2365084-1-jiasheng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/hyperv/netvsc_drv.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/hyperv/netvsc_drv.c b/drivers/net/hyperv/netvsc_drv.c
index 7e66ae1d2a59..7117187dfbd7 100644
--- a/drivers/net/hyperv/netvsc_drv.c
+++ b/drivers/net/hyperv/netvsc_drv.c
@@ -1587,6 +1587,9 @@ static void netvsc_get_ethtool_stats(struct net_device *dev,
 	pcpu_sum = kvmalloc_array(num_possible_cpus(),
 				  sizeof(struct netvsc_ethtool_pcpu_stats),
 				  GFP_KERNEL);
+	if (!pcpu_sum)
+		return;
+
 	netvsc_get_pcpu_stats(dev, pcpu_sum);
 	for_each_present_cpu(cpu) {
 		struct netvsc_ethtool_pcpu_stats *this_sum = &pcpu_sum[cpu];
-- 
2.34.1

[PATCH 5.16 17/37] drm/imx: parallel-display: Remove bus flags check in imx_pd_bridge_atomic_check()

[Greg Kroah-Hartman]

From: Christoph Niedermaier <cniedermaier@dh-electronics.com>

[ Upstream commit 6061806a863e8b65b109eb06a280041cc7525442 ]

If display timings were read from the devicetree using
of_get_display_timing() and pixelclk-active is defined
there, the flag DISPLAY_FLAGS_SYNC_POSEDGE/NEGEDGE is
automatically generated. Through the function
drm_bus_flags_from_videomode() e.g. called in the
panel-simple driver this flag got into the bus flags,
but then in imx_pd_bridge_atomic_check() the bus flag
check failed and will not initialize the display. The
original commit fe141cedc433 does not explain why this
check was introduced. So remove the bus flags check,
because it stops the initialization of the display with
valid bus flags.

Fixes: fe141cedc433 ("drm/imx: pd: Use bus format/flags provided by the bridge when available")
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
To: dri-devel@lists.freedesktop.org
Tested-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220201113643.4638-1-cniedermaier@dh-electronics.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/imx/parallel-display.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/drivers/gpu/drm/imx/parallel-display.c b/drivers/gpu/drm/imx/parallel-display.c
index a8aba0141ce7..06cb1a59b9bc 100644
--- a/drivers/gpu/drm/imx/parallel-display.c
+++ b/drivers/gpu/drm/imx/parallel-display.c
@@ -217,14 +217,6 @@ static int imx_pd_bridge_atomic_check(struct drm_bridge *bridge,
 	if (!imx_pd_format_supported(bus_fmt))
 		return -EINVAL;
 
-	if (bus_flags &
-	    ~(DRM_BUS_FLAG_DE_LOW | DRM_BUS_FLAG_DE_HIGH |
-	      DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE |
-	      DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE)) {
-		dev_warn(imxpd->dev, "invalid bus_flags (%x)\n", bus_flags);
-		return -EINVAL;
-	}
-
 	bridge_state->output_bus_cfg.flags = bus_flags;
 	bridge_state->input_bus_cfg.flags = bus_flags;
 	imx_crtc_state->bus_flags = bus_flags;
-- 
2.34.1

[PATCH 5.16 17/37] drm/imx: parallel-display: Remove bus flags check in imx_pd_bridge_atomic_check()

[Greg Kroah-Hartman]

From: Christoph Niedermaier <cniedermaier@dh-electronics.com>

[ Upstream commit 6061806a863e8b65b109eb06a280041cc7525442 ]

If display timings were read from the devicetree using
of_get_display_timing() and pixelclk-active is defined
there, the flag DISPLAY_FLAGS_SYNC_POSEDGE/NEGEDGE is
automatically generated. Through the function
drm_bus_flags_from_videomode() e.g. called in the
panel-simple driver this flag got into the bus flags,
but then in imx_pd_bridge_atomic_check() the bus flag
check failed and will not initialize the display. The
original commit fe141cedc433 does not explain why this
check was introduced. So remove the bus flags check,
because it stops the initialization of the display with
valid bus flags.

Fixes: fe141cedc433 ("drm/imx: pd: Use bus format/flags provided by the bridge when available")
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
To: dri-devel@lists.freedesktop.org
Tested-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220201113643.4638-1-cniedermaier@dh-electronics.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/imx/parallel-display.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/drivers/gpu/drm/imx/parallel-display.c b/drivers/gpu/drm/imx/parallel-display.c
index a8aba0141ce7..06cb1a59b9bc 100644
--- a/drivers/gpu/drm/imx/parallel-display.c
+++ b/drivers/gpu/drm/imx/parallel-display.c
@@ -217,14 +217,6 @@ static int imx_pd_bridge_atomic_check(struct drm_bridge *bridge,
 	if (!imx_pd_format_supported(bus_fmt))
 		return -EINVAL;
 
-	if (bus_flags &
-	    ~(DRM_BUS_FLAG_DE_LOW | DRM_BUS_FLAG_DE_HIGH |
-	      DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE |
-	      DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE)) {
-		dev_warn(imxpd->dev, "invalid bus_flags (%x)\n", bus_flags);
-		return -EINVAL;
-	}
-
 	bridge_state->output_bus_cfg.flags = bus_flags;
 	bridge_state->input_bus_cfg.flags = bus_flags;
 	imx_crtc_state->bus_flags = bus_flags;
-- 
2.34.1




_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 5.16 17/37] drm/imx: parallel-display: Remove bus flags check in imx_pd_bridge_atomic_check()

[Greg Kroah-Hartman]

From: Christoph Niedermaier <cniedermaier@dh-electronics.com>

[ Upstream commit 6061806a863e8b65b109eb06a280041cc7525442 ]

If display timings were read from the devicetree using
of_get_display_timing() and pixelclk-active is defined
there, the flag DISPLAY_FLAGS_SYNC_POSEDGE/NEGEDGE is
automatically generated. Through the function
drm_bus_flags_from_videomode() e.g. called in the
panel-simple driver this flag got into the bus flags,
but then in imx_pd_bridge_atomic_check() the bus flag
check failed and will not initialize the display. The
original commit fe141cedc433 does not explain why this
check was introduced. So remove the bus flags check,
because it stops the initialization of the display with
valid bus flags.

Fixes: fe141cedc433 ("drm/imx: pd: Use bus format/flags provided by the bridge when available")
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
To: dri-devel@lists.freedesktop.org
Tested-by: Max Krummenacher <max.krummenacher@toradex.com>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220201113643.4638-1-cniedermaier@dh-electronics.com
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/imx/parallel-display.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/drivers/gpu/drm/imx/parallel-display.c b/drivers/gpu/drm/imx/parallel-display.c
index a8aba0141ce7..06cb1a59b9bc 100644
--- a/drivers/gpu/drm/imx/parallel-display.c
+++ b/drivers/gpu/drm/imx/parallel-display.c
@@ -217,14 +217,6 @@ static int imx_pd_bridge_atomic_check(struct drm_bridge *bridge,
 	if (!imx_pd_format_supported(bus_fmt))
 		return -EINVAL;
 
-	if (bus_flags &
-	    ~(DRM_BUS_FLAG_DE_LOW | DRM_BUS_FLAG_DE_HIGH |
-	      DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE |
-	      DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE)) {
-		dev_warn(imxpd->dev, "invalid bus_flags (%x)\n", bus_flags);
-		return -EINVAL;
-	}
-
 	bridge_state->output_bus_cfg.flags = bus_flags;
 	bridge_state->input_bus_cfg.flags = bus_flags;
 	imx_crtc_state->bus_flags = bus_flags;
-- 
2.34.1

[PATCH 5.16 18/37] drm/panel: simple: Fix Innolux G070Y2-L01 BPP settings

[Greg Kroah-Hartman]

From: Marek Vasut <marex@denx.de>

[ Upstream commit fc1b6ef7bfb3d1d4df868b1c3e0480cacda6cd81 ]

The Innolux G070Y2-L01 supports two modes of operation:
1) FRC=Low/NC ... MEDIA_BUS_FMT_RGB666_1X7X3_SPWG ... BPP=6
2) FRC=High ..... MEDIA_BUS_FMT_RGB888_1X7X4_SPWG ... BPP=8

Currently the panel description mixes both, BPP from 1) and bus
format from 2), which triggers a warning at panel-simple.c:615.

Pick the later, set bpp=8, fix the warning.

Fixes: a5d2ade627dca ("drm/panel: simple: Add support for Innolux G070Y2-L01")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Christoph Fritz <chf.fritz@googlemail.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220220040718.532866-1-marex@denx.de
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/panel/panel-simple.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 87f30bced7b7..6a820b698f5a 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -2017,7 +2017,7 @@ static const struct display_timing innolux_g070y2_l01_timing = {
 static const struct panel_desc innolux_g070y2_l01 = {
 	.timings = &innolux_g070y2_l01_timing,
 	.num_timings = 1,
-	.bpc = 6,
+	.bpc = 8,
 	.size = {
 		.width = 152,
 		.height = 91,
-- 
2.34.1

[PATCH 5.16 19/37] net: handle ARPHRD_PIMREG in dev_is_mac_header_xmit()

[Greg Kroah-Hartman]

From: Nicolas Dichtel <nicolas.dichtel@6wind.com>

[ Upstream commit 4ee06de7729d795773145692e246a06448b1eb7a ]

This kind of interface doesn't have a mac header. This patch fixes
bpf_redirect() to a PIM interface.

Fixes: 27b29f63058d ("bpf: add bpf_redirect() helper")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20220315092008.31423-1-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/if_arp.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/linux/if_arp.h b/include/linux/if_arp.h
index b712217f7030..1ed52441972f 100644
--- a/include/linux/if_arp.h
+++ b/include/linux/if_arp.h
@@ -52,6 +52,7 @@ static inline bool dev_is_mac_header_xmit(const struct net_device *dev)
 	case ARPHRD_VOID:
 	case ARPHRD_NONE:
 	case ARPHRD_RAWIP:
+	case ARPHRD_PIMREG:
 		return false;
 	default:
 		return true;
-- 
2.34.1

[PATCH 5.16 20/37] drm: Dont make DRM_PANEL_BRIDGE dependent on DRM_KMS_HELPERS

[Greg Kroah-Hartman]

From: Thomas Zimmermann <tzimmermann@suse.de>

[ Upstream commit 3c3384050d68570f9de0fec9e58824decfefba7a ]

Fix a number of undefined references to drm_kms_helper.ko in
drm_dp_helper.ko:

  arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_mst_duplicate_state':
  drm_dp_mst_topology.c:(.text+0x2df0): undefined reference to `__drm_atomic_helper_private_obj_duplicate_state'
  arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_delayed_destroy_work':
  drm_dp_mst_topology.c:(.text+0x370c): undefined reference to `drm_kms_helper_hotplug_event'
  arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_mst_up_req_work':
  drm_dp_mst_topology.c:(.text+0x7938): undefined reference to `drm_kms_helper_hotplug_event'
  arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_mst_link_probe_work':
  drm_dp_mst_topology.c:(.text+0x82e0): undefined reference to `drm_kms_helper_hotplug_event'

This happens if panel-edp.ko has been configured with

  DRM_PANEL_EDP=y
  DRM_DP_HELPER=y
  DRM_KMS_HELPER=m

which builds DP helpers into the kernel and KMS helpers sa a module.
Making DRM_PANEL_EDP select DRM_KMS_HELPER resolves this problem.

To avoid a resulting cyclic dependency with DRM_PANEL_BRIDGE, don't
make the latter depend on DRM_KMS_HELPER and fix the one DRM bridge
drivers that doesn't already select DRM_KMS_HELPER. As KMS helpers
cannot be selected directly by the user, config symbols should avoid
depending on it anyway.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 3755d35ee1d2 ("drm/panel: Select DRM_DP_HELPER for DRM_PANEL_EDP")
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Brian Masney <bmasney@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Linux Kernel Functional Testing <lkft@linaro.org>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Dave Airlie <airlied@redhat.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/478296/
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/Kconfig | 2 +-
 drivers/gpu/drm/panel/Kconfig  | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 431b6e12a81f..68ec45abc1fb 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -8,7 +8,6 @@ config DRM_BRIDGE
 config DRM_PANEL_BRIDGE
 	def_bool y
 	depends on DRM_BRIDGE
-	depends on DRM_KMS_HELPER
 	select DRM_PANEL
 	help
 	  DRM bridge wrapper of DRM panels
@@ -30,6 +29,7 @@ config DRM_CDNS_DSI
 config DRM_CHIPONE_ICN6211
 	tristate "Chipone ICN6211 MIPI-DSI/RGB Converter bridge"
 	depends on OF
+	select DRM_KMS_HELPER
 	select DRM_MIPI_DSI
 	select DRM_PANEL_BRIDGE
 	help
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 0d3798354e6a..42011d884202 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -96,6 +96,7 @@ config DRM_PANEL_EDP
 	select VIDEOMODE_HELPERS
 	select DRM_DP_AUX_BUS
 	select DRM_DP_HELPER
+	select DRM_KMS_HELPER
 	help
 	  DRM panel driver for dumb eDP panels that need at most a regulator and
 	  a GPIO to be powered up. Optionally a backlight can be attached so
-- 
2.34.1

[PATCH 5.16 20/37] drm: Dont make DRM_PANEL_BRIDGE dependent on DRM_KMS_HELPERS

[Greg Kroah-Hartman]

From: Thomas Zimmermann <tzimmermann@suse.de>

[ Upstream commit 3c3384050d68570f9de0fec9e58824decfefba7a ]

Fix a number of undefined references to drm_kms_helper.ko in
drm_dp_helper.ko:

  arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_mst_duplicate_state':
  drm_dp_mst_topology.c:(.text+0x2df0): undefined reference to `__drm_atomic_helper_private_obj_duplicate_state'
  arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_delayed_destroy_work':
  drm_dp_mst_topology.c:(.text+0x370c): undefined reference to `drm_kms_helper_hotplug_event'
  arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_mst_up_req_work':
  drm_dp_mst_topology.c:(.text+0x7938): undefined reference to `drm_kms_helper_hotplug_event'
  arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_mst_link_probe_work':
  drm_dp_mst_topology.c:(.text+0x82e0): undefined reference to `drm_kms_helper_hotplug_event'

This happens if panel-edp.ko has been configured with

  DRM_PANEL_EDP=y
  DRM_DP_HELPER=y
  DRM_KMS_HELPER=m

which builds DP helpers into the kernel and KMS helpers sa a module.
Making DRM_PANEL_EDP select DRM_KMS_HELPER resolves this problem.

To avoid a resulting cyclic dependency with DRM_PANEL_BRIDGE, don't
make the latter depend on DRM_KMS_HELPER and fix the one DRM bridge
drivers that doesn't already select DRM_KMS_HELPER. As KMS helpers
cannot be selected directly by the user, config symbols should avoid
depending on it anyway.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 3755d35ee1d2 ("drm/panel: Select DRM_DP_HELPER for DRM_PANEL_EDP")
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Brian Masney <bmasney@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Linux Kernel Functional Testing <lkft@linaro.org>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Cc: Dave Airlie <airlied@redhat.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/478296/
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/Kconfig | 2 +-
 drivers/gpu/drm/panel/Kconfig  | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 431b6e12a81f..68ec45abc1fb 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -8,7 +8,6 @@ config DRM_BRIDGE
 config DRM_PANEL_BRIDGE
 	def_bool y
 	depends on DRM_BRIDGE
-	depends on DRM_KMS_HELPER
 	select DRM_PANEL
 	help
 	  DRM bridge wrapper of DRM panels
@@ -30,6 +29,7 @@ config DRM_CDNS_DSI
 config DRM_CHIPONE_ICN6211
 	tristate "Chipone ICN6211 MIPI-DSI/RGB Converter bridge"
 	depends on OF
+	select DRM_KMS_HELPER
 	select DRM_MIPI_DSI
 	select DRM_PANEL_BRIDGE
 	help
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 0d3798354e6a..42011d884202 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -96,6 +96,7 @@ config DRM_PANEL_EDP
 	select VIDEOMODE_HELPERS
 	select DRM_DP_AUX_BUS
 	select DRM_DP_HELPER
+	select DRM_KMS_HELPER
 	help
 	  DRM panel driver for dumb eDP panels that need at most a regulator and
 	  a GPIO to be powered up. Optionally a backlight can be attached so
-- 
2.34.1

[PATCH 5.16 21/37] net: dsa: Add missing of_node_put() in dsa_port_parse_of

[Greg Kroah-Hartman]

From: Miaoqian Lin <linmq006@gmail.com>

[ Upstream commit cb0b430b4e3acc88c85e0ad2e25f2a25a5765262 ]

The device_node pointer is returned by of_parse_phandle()  with refcount
incremented. We should use of_node_put() on it when done.

Fixes: 6d4e5c570c2d ("net: dsa: get port type at parse time")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220316082602.10785-1-linmq006@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/dsa/dsa2.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c
index 7578b1350f18..e64ef196a984 100644
--- a/net/dsa/dsa2.c
+++ b/net/dsa/dsa2.c
@@ -1327,6 +1327,7 @@ static int dsa_port_parse_of(struct dsa_port *dp, struct device_node *dn)
 		const char *user_protocol;
 
 		master = of_find_net_device_by_node(ethernet);
+		of_node_put(ethernet);
 		if (!master)
 			return -EPROBE_DEFER;
 
-- 
2.34.1

[PATCH 5.16 22/37] net: phy: mscc: Add MODULE_FIRMWARE macros

[Greg Kroah-Hartman]

From: Juerg Haefliger <juerg.haefliger@canonical.com>

[ Upstream commit f1858c277ba40172005b76a31e6bb931bfc19d9c ]

The driver requires firmware so define MODULE_FIRMWARE so that modinfo
provides the details.

Fixes: fa164e40c53b ("net: phy: mscc: split the driver into separate files")
Signed-off-by: Juerg Haefliger <juergh@canonical.com>
Link: https://lore.kernel.org/r/20220316151835.88765-1-juergh@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/mscc/mscc_main.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/phy/mscc/mscc_main.c b/drivers/net/phy/mscc/mscc_main.c
index ebfeeb3c67c1..7e3017e7a1c0 100644
--- a/drivers/net/phy/mscc/mscc_main.c
+++ b/drivers/net/phy/mscc/mscc_main.c
@@ -2685,3 +2685,6 @@ MODULE_DEVICE_TABLE(mdio, vsc85xx_tbl);
 MODULE_DESCRIPTION("Microsemi VSC85xx PHY driver");
 MODULE_AUTHOR("Nagaraju Lakkaraju");
 MODULE_LICENSE("Dual MIT/GPL");
+
+MODULE_FIRMWARE(MSCC_VSC8584_REVB_INT8051_FW);
+MODULE_FIRMWARE(MSCC_VSC8574_REVB_INT8051_FW);
-- 
2.34.1

[PATCH 5.16 23/37] bnx2x: fix built-in kernel driver load failure

[Greg Kroah-Hartman]

From: Manish Chopra <manishc@marvell.com>

[ Upstream commit 424e7834e293936a54fcf05173f2884171adc5a3 ]

Commit b7a49f73059f ("bnx2x: Utilize firmware 7.13.21.0")
added request_firmware() logic in probe() which caused
load failure when firmware file is not present in initrd (below),
as access to firmware file is not feasible during probe.

  Direct firmware load for bnx2x/bnx2x-e2-7.13.15.0.fw failed with error -2
  Direct firmware load for bnx2x/bnx2x-e2-7.13.21.0.fw failed with error -2

This patch fixes this issue by -

1. Removing request_firmware() logic from the probe()
   such that .ndo_open() handle it as it used to handle
   it earlier

2. Given request_firmware() is removed from probe(), so
   driver has to relax FW version comparisons a bit against
   the already loaded FW version (by some other PFs of same
   adapter) to allow different compatible/close enough FWs with which
   multiple PFs may run with (in different environments), as the
   given PF who is in probe flow has no idea now with which firmware
   file version it is going to initialize the device in ndo_open()

Link: https://lore.kernel.org/all/46f2d9d9-ae7f-b332-ddeb-b59802be2bab@molgen.mpg.de/
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Fixes: b7a49f73059f ("bnx2x: Utilize firmware 7.13.21.0")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Link: https://lore.kernel.org/r/20220316214613.6884-1-manishc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x.h   |  2 --
 .../net/ethernet/broadcom/bnx2x/bnx2x_cmn.c   | 28 +++++++++++--------
 .../net/ethernet/broadcom/bnx2x/bnx2x_main.c  | 15 ++--------
 3 files changed, 19 insertions(+), 26 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index a19dd6797070..2209d99b3404 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -2533,6 +2533,4 @@ void bnx2x_register_phc(struct bnx2x *bp);
  * Meant for implicit re-load flows.
  */
 int bnx2x_vlan_reconfigure_vid(struct bnx2x *bp);
-int bnx2x_init_firmware(struct bnx2x *bp);
-void bnx2x_release_firmware(struct bnx2x *bp);
 #endif /* bnx2x.h */
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index e57fe0034ce2..b1ad62774897 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -2363,24 +2363,30 @@ int bnx2x_compare_fw_ver(struct bnx2x *bp, u32 load_code, bool print_err)
 	/* is another pf loaded on this engine? */
 	if (load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP &&
 	    load_code != FW_MSG_CODE_DRV_LOAD_COMMON) {
-		/* build my FW version dword */
-		u32 my_fw = (bp->fw_major) + (bp->fw_minor << 8) +
-				(bp->fw_rev << 16) + (bp->fw_eng << 24);
+		u8 loaded_fw_major, loaded_fw_minor, loaded_fw_rev, loaded_fw_eng;
+		u32 loaded_fw;
 
 		/* read loaded FW from chip */
-		u32 loaded_fw = REG_RD(bp, XSEM_REG_PRAM);
+		loaded_fw = REG_RD(bp, XSEM_REG_PRAM);
 
-		DP(BNX2X_MSG_SP, "loaded fw %x, my fw %x\n",
-		   loaded_fw, my_fw);
+		loaded_fw_major = loaded_fw & 0xff;
+		loaded_fw_minor = (loaded_fw >> 8) & 0xff;
+		loaded_fw_rev = (loaded_fw >> 16) & 0xff;
+		loaded_fw_eng = (loaded_fw >> 24) & 0xff;
+
+		DP(BNX2X_MSG_SP, "loaded fw 0x%x major 0x%x minor 0x%x rev 0x%x eng 0x%x\n",
+		   loaded_fw, loaded_fw_major, loaded_fw_minor, loaded_fw_rev, loaded_fw_eng);
 
 		/* abort nic load if version mismatch */
-		if (my_fw != loaded_fw) {
+		if (loaded_fw_major != BCM_5710_FW_MAJOR_VERSION ||
+		    loaded_fw_minor != BCM_5710_FW_MINOR_VERSION ||
+		    loaded_fw_eng != BCM_5710_FW_ENGINEERING_VERSION ||
+		    loaded_fw_rev < BCM_5710_FW_REVISION_VERSION_V15) {
 			if (print_err)
-				BNX2X_ERR("bnx2x with FW %x was already loaded which mismatches my %x FW. Aborting\n",
-					  loaded_fw, my_fw);
+				BNX2X_ERR("loaded FW incompatible. Aborting\n");
 			else
-				BNX2X_DEV_INFO("bnx2x with FW %x was already loaded which mismatches my %x FW, possibly due to MF UNDI\n",
-					       loaded_fw, my_fw);
+				BNX2X_DEV_INFO("loaded FW incompatible, possibly due to MF UNDI\n");
+
 			return -EBUSY;
 		}
 	}
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 4ce596daeaae..569004c961d4 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -12319,15 +12319,6 @@ static int bnx2x_init_bp(struct bnx2x *bp)
 
 	bnx2x_read_fwinfo(bp);
 
-	if (IS_PF(bp)) {
-		rc = bnx2x_init_firmware(bp);
-
-		if (rc) {
-			bnx2x_free_mem_bp(bp);
-			return rc;
-		}
-	}
-
 	func = BP_FUNC(bp);
 
 	/* need to reset chip if undi was active */
@@ -12340,7 +12331,6 @@ static int bnx2x_init_bp(struct bnx2x *bp)
 
 		rc = bnx2x_prev_unload(bp);
 		if (rc) {
-			bnx2x_release_firmware(bp);
 			bnx2x_free_mem_bp(bp);
 			return rc;
 		}
@@ -13420,7 +13410,7 @@ do {									\
 	     (u8 *)bp->arr, len);					\
 } while (0)
 
-int bnx2x_init_firmware(struct bnx2x *bp)
+static int bnx2x_init_firmware(struct bnx2x *bp)
 {
 	const char *fw_file_name, *fw_file_name_v15;
 	struct bnx2x_fw_file_hdr *fw_hdr;
@@ -13520,7 +13510,7 @@ int bnx2x_init_firmware(struct bnx2x *bp)
 	return rc;
 }
 
-void bnx2x_release_firmware(struct bnx2x *bp)
+static void bnx2x_release_firmware(struct bnx2x *bp)
 {
 	kfree(bp->init_ops_offsets);
 	kfree(bp->init_ops);
@@ -14037,7 +14027,6 @@ static int bnx2x_init_one(struct pci_dev *pdev,
 	return 0;
 
 init_one_freemem:
-	bnx2x_release_firmware(bp);
 	bnx2x_free_mem_bp(bp);
 
 init_one_exit:
-- 
2.34.1

[PATCH 5.16 24/37] net: bcmgenet: skip invalid partial checksums

[Greg Kroah-Hartman]

From: Doug Berger <opendmb@gmail.com>

[ Upstream commit 0f643c88c8d240eba0ea25c2e095a46515ff46e9 ]

The RXCHK block will return a partial checksum of 0 if it encounters
a problem while receiving a packet. Since a 1's complement sum can
only produce this result if no bits are set in the received data
stream it is fair to treat it as an invalid partial checksum and
not pass it up the stack.

Fixes: 810155397890 ("net: bcmgenet: use CHECKSUM_COMPLETE for NETIF_F_RXCSUM")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220317012812.1313196-1-opendmb@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 87f1056e29ff..2da804f84b48 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -2287,8 +2287,10 @@ static unsigned int bcmgenet_desc_rx(struct bcmgenet_rx_ring *ring,
 		dma_length_status = status->length_status;
 		if (dev->features & NETIF_F_RXCSUM) {
 			rx_csum = (__force __be16)(status->rx_csum & 0xffff);
-			skb->csum = (__force __wsum)ntohs(rx_csum);
-			skb->ip_summed = CHECKSUM_COMPLETE;
+			if (rx_csum) {
+				skb->csum = (__force __wsum)ntohs(rx_csum);
+				skb->ip_summed = CHECKSUM_COMPLETE;
+			}
 		}
 
 		/* DMA flags and length are still valid no matter how
-- 
2.34.1

[PATCH 5.16 25/37] net: mscc: ocelot: fix backwards compatibility with single-chain tc-flower offload

[Greg Kroah-Hartman]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit 8e0341aefcc9133f3f48683873284b169581315b ]

ACL rules can be offloaded to VCAP IS2 either through chain 0, or, since
the blamed commit, through a chain index whose number encodes a specific
PAG (Policy Action Group) and lookup number.

The chain number is translated through ocelot_chain_to_pag() into a PAG,
and through ocelot_chain_to_lookup() into a lookup number.

The problem with the blamed commit is that the above 2 functions don't
have special treatment for chain 0. So ocelot_chain_to_pag(0) returns
filter->pag = 224, which is in fact -32, but the "pag" field is an u8.

So we end up programming the hardware with VCAP IS2 entries having a PAG
of 224. But the way in which the PAG works is that it defines a subset
of VCAP IS2 filters which should match on a packet. The default PAG is
0, and previous VCAP IS1 rules (which we offload using 'goto') can
modify it. So basically, we are installing filters with a PAG on which
no packet will ever match. This is the hardware equivalent of adding
filters to a chain which has no 'goto' to it.

Restore the previous functionality by making ACL filters offloaded to
chain 0 go to PAG 0 and lookup number 0. The choice of PAG is clearly
correct, but the choice of lookup number isn't "as before" (which was to
leave the lookup a "don't care"). However, lookup 0 should be fine,
since even though there are ACL actions (policers) which have a
requirement to be used in a specific lookup, that lookup is 0.

Fixes: 226e9cd82a96 ("net: mscc: ocelot: only install TCAM entries into a specific lookup and PAG")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220316192117.2568261-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mscc/ocelot_flower.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mscc/ocelot_flower.c b/drivers/net/ethernet/mscc/ocelot_flower.c
index 738dd2be79dc..a3f1f1fbaf7d 100644
--- a/drivers/net/ethernet/mscc/ocelot_flower.c
+++ b/drivers/net/ethernet/mscc/ocelot_flower.c
@@ -54,6 +54,12 @@ static int ocelot_chain_to_block(int chain, bool ingress)
  */
 static int ocelot_chain_to_lookup(int chain)
 {
+	/* Backwards compatibility with older, single-chain tc-flower
+	 * offload support in Ocelot
+	 */
+	if (chain == 0)
+		return 0;
+
 	return (chain / VCAP_LOOKUP) % 10;
 }
 
@@ -62,7 +68,15 @@ static int ocelot_chain_to_lookup(int chain)
  */
 static int ocelot_chain_to_pag(int chain)
 {
-	int lookup = ocelot_chain_to_lookup(chain);
+	int lookup;
+
+	/* Backwards compatibility with older, single-chain tc-flower
+	 * offload support in Ocelot
+	 */
+	if (chain == 0)
+		return 0;
+
+	lookup = ocelot_chain_to_lookup(chain);
 
 	/* calculate PAG value as chain index relative to the first PAG */
 	return chain - VCAP_IS2_CHAIN(lookup, 0);
-- 
2.34.1

[PATCH 5.16 26/37] iavf: Fix hang during reboot/shutdown

[Greg Kroah-Hartman]

From: Ivan Vecera <ivecera@redhat.com>

[ Upstream commit b04683ff8f0823b869c219c78ba0d974bddea0b5 ]

Recent commit 974578017fc1 ("iavf: Add waiting so the port is
initialized in remove") adds a wait-loop at the beginning of
iavf_remove() to ensure that port initialization is finished
prior unregistering net device. This causes a regression
in reboot/shutdown scenario because in this case callback
iavf_shutdown() is called and this callback detaches the device,
makes it down if it is running and sets its state to __IAVF_REMOVE.
Later shutdown callback of associated PF driver (e.g. ice_shutdown)
is called. That callback calls among other things sriov_disable()
that calls indirectly iavf_remove() (see stack trace below).
As the adapter state is already __IAVF_REMOVE then the mentioned
loop is end-less and shutdown process hangs.

The patch fixes this by checking adapter's state at the beginning
of iavf_remove() and skips the rest of the function if the adapter
is already in remove state (shutdown is in progress).

Reproducer:
1. Create VF on PF driven by ice or i40e driver
2. Ensure that the VF is bound to iavf driver
3. Reboot

[52625.981294] sysrq: SysRq : Show Blocked State
[52625.988377] task:reboot          state:D stack:    0 pid:17359 ppid:     1 f2
[52625.996732] Call Trace:
[52625.999187]  __schedule+0x2d1/0x830
[52626.007400]  schedule+0x35/0xa0
[52626.010545]  schedule_hrtimeout_range_clock+0x83/0x100
[52626.020046]  usleep_range+0x5b/0x80
[52626.023540]  iavf_remove+0x63/0x5b0 [iavf]
[52626.027645]  pci_device_remove+0x3b/0xc0
[52626.031572]  device_release_driver_internal+0x103/0x1f0
[52626.036805]  pci_stop_bus_device+0x72/0xa0
[52626.040904]  pci_stop_and_remove_bus_device+0xe/0x20
[52626.045870]  pci_iov_remove_virtfn+0xba/0x120
[52626.050232]  sriov_disable+0x2f/0xe0
[52626.053813]  ice_free_vfs+0x7c/0x340 [ice]
[52626.057946]  ice_remove+0x220/0x240 [ice]
[52626.061967]  ice_shutdown+0x16/0x50 [ice]
[52626.065987]  pci_device_shutdown+0x34/0x60
[52626.070086]  device_shutdown+0x165/0x1c5
[52626.074011]  kernel_restart+0xe/0x30
[52626.077593]  __do_sys_reboot+0x1d2/0x210
[52626.093815]  do_syscall_64+0x5b/0x1a0
[52626.097483]  entry_SYSCALL_64_after_hwframe+0x65/0xca

Fixes: 974578017fc1 ("iavf: Add waiting so the port is initialized in remove")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://lore.kernel.org/r/20220317104524.2802848-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/iavf/iavf_main.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c
index f2ce30366484..42e6675078cd 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_main.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_main.c
@@ -4028,6 +4028,13 @@ static void iavf_remove(struct pci_dev *pdev)
 	struct iavf_hw *hw = &adapter->hw;
 	int err;
 
+	/* When reboot/shutdown is in progress no need to do anything
+	 * as the adapter is already REMOVE state that was set during
+	 * iavf_shutdown() callback.
+	 */
+	if (adapter->state == __IAVF_REMOVE)
+		return;
+
 	set_bit(__IAVF_IN_REMOVE_TASK, &adapter->crit_section);
 	/* Wait until port initialization is complete.
 	 * There are flows where register/unregister netdev may race.
-- 
2.34.1

[PATCH 5.16 27/37] arm64: fix clang warning about TRAMP_VALIAS

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 7f34b43e07cb512b28543fdcb9f35d1fbfda9ebc ]

The newly introduced TRAMP_VALIAS definition causes a build warning
with clang-14:

arch/arm64/include/asm/vectors.h:66:31: error: arithmetic on a null pointer treated as a cast from integer to pointer is a GNU extension [-Werror,-Wnull-pointer-arithmetic]
                return (char *)TRAMP_VALIAS + SZ_2K * slot;

Change the addition to something clang does not complain about.

Fixes: bd09128d16fa ("arm64: Add percpu vectors for EL1")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20220316183833.1563139-1-arnd@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/vectors.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/include/asm/vectors.h b/arch/arm64/include/asm/vectors.h
index f64613a96d53..bc9a2145f419 100644
--- a/arch/arm64/include/asm/vectors.h
+++ b/arch/arm64/include/asm/vectors.h
@@ -56,14 +56,14 @@ enum arm64_bp_harden_el1_vectors {
 DECLARE_PER_CPU_READ_MOSTLY(const char *, this_cpu_vector);
 
 #ifndef CONFIG_UNMAP_KERNEL_AT_EL0
-#define TRAMP_VALIAS	0
+#define TRAMP_VALIAS	0ul
 #endif
 
 static inline const char *
 arm64_get_bp_hardening_vector(enum arm64_bp_harden_el1_vectors slot)
 {
 	if (arm64_kernel_unmapped_at_el0())
-		return (char *)TRAMP_VALIAS + SZ_2K * slot;
+		return (char *)(TRAMP_VALIAS + SZ_2K * slot);
 
 	WARN_ON_ONCE(slot == EL1_VECTOR_KPTI);
 
-- 
2.34.1

[PATCH 5.16 28/37] usb: gadget: rndis: prevent integer overflow in rndis_set_response()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 65f3324f4b6fed78b8761c3b74615ecf0ffa81fa upstream.

If "BufOffset" is very large the "BufOffset + 8" operation can have an
integer overflow.

Cc: stable@kernel.org
Fixes: 38ea1eac7d88 ("usb: gadget: rndis: check size of RNDIS_MSG_SET command")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220301080424.GA17208@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/function/rndis.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/usb/gadget/function/rndis.c
+++ b/drivers/usb/gadget/function/rndis.c
@@ -640,6 +640,7 @@ static int rndis_set_response(struct rnd
 	BufLength = le32_to_cpu(buf->InformationBufferLength);
 	BufOffset = le32_to_cpu(buf->InformationBufferOffset);
 	if ((BufLength > RNDIS_MAX_TOTAL_SIZE) ||
+	    (BufOffset > RNDIS_MAX_TOTAL_SIZE) ||
 	    (BufOffset + 8 >= RNDIS_MAX_TOTAL_SIZE))
 		    return -EINVAL;
 

[PATCH 5.16 29/37] usb: gadget: Fix use-after-free bug by not setting udc->dev.driver

[Greg Kroah-Hartman]

From: Alan Stern <stern@rowland.harvard.edu>

commit 16b1941eac2bd499f065a6739a40ce0011a3d740 upstream.

The syzbot fuzzer found a use-after-free bug:

BUG: KASAN: use-after-free in dev_uevent+0x712/0x780 drivers/base/core.c:2320
Read of size 8 at addr ffff88802b934098 by task udevd/3689

CPU: 2 PID: 3689 Comm: udevd Not tainted 5.17.0-rc4-syzkaller-00229-g4f12b742eb2b #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 print_address_description.constprop.0.cold+0x8d/0x303 mm/kasan/report.c:255
 __kasan_report mm/kasan/report.c:442 [inline]
 kasan_report.cold+0x83/0xdf mm/kasan/report.c:459
 dev_uevent+0x712/0x780 drivers/base/core.c:2320
 uevent_show+0x1b8/0x380 drivers/base/core.c:2391
 dev_attr_show+0x4b/0x90 drivers/base/core.c:2094

Although the bug manifested in the driver core, the real cause was a
race with the gadget core.  dev_uevent() does:

	if (dev->driver)
		add_uevent_var(env, "DRIVER=%s", dev->driver->name);

and between the test and the dereference of dev->driver, the gadget
core sets dev->driver to NULL.

The race wouldn't occur if the gadget core registered its devices on
a real bus, using the standard synchronization techniques of the
driver core.  However, it's not necessary to make such a large change
in order to fix this bug; all we need to do is make sure that
udc->dev.driver is always NULL.

In fact, there is no reason for udc->dev.driver ever to be set to
anything, let alone to the value it currently gets: the address of the
gadget's driver.  After all, a gadget driver only knows how to manage
a gadget, not how to manage a UDC.

This patch simply removes the statements in the gadget core that touch
udc->dev.driver.

Fixes: 2ccea03a8f7e ("usb: gadget: introduce UDC Class")
CC: <stable@vger.kernel.org>
Reported-and-tested-by: syzbot+348b571beb5eeb70a582@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YiQgukfFFbBnwJ/9@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/gadget/udc/core.c |    3 ---
 1 file changed, 3 deletions(-)

--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -1436,7 +1436,6 @@ static void usb_gadget_remove_driver(str
 	usb_gadget_udc_stop(udc);
 
 	udc->driver = NULL;
-	udc->dev.driver = NULL;
 	udc->gadget->dev.driver = NULL;
 }
 
@@ -1498,7 +1497,6 @@ static int udc_bind_to_driver(struct usb
 			driver->function);
 
 	udc->driver = driver;
-	udc->dev.driver = &driver->driver;
 	udc->gadget->dev.driver = &driver->driver;
 
 	usb_gadget_udc_set_speed(udc, driver->max_speed);
@@ -1521,7 +1519,6 @@ err1:
 		dev_err(&udc->dev, "failed to start %s: %d\n",
 			udc->driver->function, ret);
 	udc->driver = NULL;
-	udc->dev.driver = NULL;
 	udc->gadget->dev.driver = NULL;
 	return ret;
 }

[PATCH 5.16 30/37] usb: usbtmc: Fix bug in pipe direction for control transfers

[Greg Kroah-Hartman]

From: Alan Stern <stern@rowland.harvard.edu>

commit e9b667a82cdcfe21d590344447d65daed52b353b upstream.

The syzbot fuzzer reported a minor bug in the usbtmc driver:

usb 5-1: BOGUS control dir, pipe 80001e80 doesn't match bRequestType 0
WARNING: CPU: 0 PID: 3813 at drivers/usb/core/urb.c:412
usb_submit_urb+0x13a5/0x1970 drivers/usb/core/urb.c:410
Modules linked in:
CPU: 0 PID: 3813 Comm: syz-executor122 Not tainted
5.17.0-rc5-syzkaller-00306-g2293be58d6a1 #0
...
Call Trace:
 <TASK>
 usb_start_wait_urb+0x113/0x530 drivers/usb/core/message.c:58
 usb_internal_control_msg drivers/usb/core/message.c:102 [inline]
 usb_control_msg+0x2a5/0x4b0 drivers/usb/core/message.c:153
 usbtmc_ioctl_request drivers/usb/class/usbtmc.c:1947 [inline]

The problem is that usbtmc_ioctl_request() uses usb_rcvctrlpipe() for
all of its transfers, whether they are in or out.  It's easy to fix.

CC: <stable@vger.kernel.org>
Reported-and-tested-by: syzbot+a48e3d1a875240cab5de@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/YiEsYTPEE6lOCOA5@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/class/usbtmc.c |   13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -1919,6 +1919,7 @@ static int usbtmc_ioctl_request(struct u
 	struct usbtmc_ctrlrequest request;
 	u8 *buffer = NULL;
 	int rv;
+	unsigned int is_in, pipe;
 	unsigned long res;
 
 	res = copy_from_user(&request, arg, sizeof(struct usbtmc_ctrlrequest));
@@ -1928,12 +1929,14 @@ static int usbtmc_ioctl_request(struct u
 	if (request.req.wLength > USBTMC_BUFSIZE)
 		return -EMSGSIZE;
 
+	is_in = request.req.bRequestType & USB_DIR_IN;
+
 	if (request.req.wLength) {
 		buffer = kmalloc(request.req.wLength, GFP_KERNEL);
 		if (!buffer)
 			return -ENOMEM;
 
-		if ((request.req.bRequestType & USB_DIR_IN) == 0) {
+		if (!is_in) {
 			/* Send control data to device */
 			res = copy_from_user(buffer, request.data,
 					     request.req.wLength);
@@ -1944,8 +1947,12 @@ static int usbtmc_ioctl_request(struct u
 		}
 	}
 
+	if (is_in)
+		pipe = usb_rcvctrlpipe(data->usb_dev, 0);
+	else
+		pipe = usb_sndctrlpipe(data->usb_dev, 0);
 	rv = usb_control_msg(data->usb_dev,
-			usb_rcvctrlpipe(data->usb_dev, 0),
+			pipe,
 			request.req.bRequest,
 			request.req.bRequestType,
 			request.req.wValue,
@@ -1957,7 +1964,7 @@ static int usbtmc_ioctl_request(struct u
 		goto exit;
 	}
 
-	if (rv && (request.req.bRequestType & USB_DIR_IN)) {
+	if (rv && is_in) {
 		/* Read control data from device */
 		res = copy_to_user(request.data, buffer, rv);
 		if (res)

[PATCH 5.16 31/37] scsi: mpt3sas: Page fault in reply q processing

[Greg Kroah-Hartman]

From: Matt Lupfer <mlupfer@ddn.com>

commit 69ad4ef868c1fc7609daa235dfa46d28ba7a3ba3 upstream.

A page fault was encountered in mpt3sas on a LUN reset error path:

[  145.763216] mpt3sas_cm1: Task abort tm failed: handle(0x0002),timeout(30) tr_method(0x0) smid(3) msix_index(0)
[  145.778932] scsi 1:0:0:0: task abort: FAILED scmd(0x0000000024ba29a2)
[  145.817307] scsi 1:0:0:0: attempting device reset! scmd(0x0000000024ba29a2)
[  145.827253] scsi 1:0:0:0: [sg1] tag#2 CDB: Receive Diagnostic 1c 01 01 ff fc 00
[  145.837617] scsi target1:0:0: handle(0x0002), sas_address(0x500605b0000272b9), phy(0)
[  145.848598] scsi target1:0:0: enclosure logical id(0x500605b0000272b8), slot(0)
[  149.858378] mpt3sas_cm1: Poll ReplyDescriptor queues for completion of smid(0), task_type(0x05), handle(0x0002)
[  149.875202] BUG: unable to handle page fault for address: 00000007fffc445d
[  149.885617] #PF: supervisor read access in kernel mode
[  149.894346] #PF: error_code(0x0000) - not-present page
[  149.903123] PGD 0 P4D 0
[  149.909387] Oops: 0000 [#1] PREEMPT SMP NOPTI
[  149.917417] CPU: 24 PID: 3512 Comm: scsi_eh_1 Kdump: loaded Tainted: G S         O      5.10.89-altav-1 #1
[  149.934327] Hardware name: DDN           200NVX2             /200NVX2-MB          , BIOS ATHG2.2.02.01 09/10/2021
[  149.951871] RIP: 0010:_base_process_reply_queue+0x4b/0x900 [mpt3sas]
[  149.961889] Code: 0f 84 22 02 00 00 8d 48 01 49 89 fd 48 8d 57 38 f0 0f b1 4f 38 0f 85 d8 01 00 00 49 8b 45 10 45 31 e4 41 8b 55 0c 48 8d 1c d0 <0f> b6 03 83 e0 0f 3c 0f 0f 85 a2 00 00 00 e9 e6 01 00 00 0f b7 ee
[  149.991952] RSP: 0018:ffffc9000f1ebcb8 EFLAGS: 00010246
[  150.000937] RAX: 0000000000000055 RBX: 00000007fffc445d RCX: 000000002548f071
[  150.011841] RDX: 00000000ffff8881 RSI: 0000000000000001 RDI: ffff888125ed50d8
[  150.022670] RBP: 0000000000000000 R08: 0000000000000000 R09: c0000000ffff7fff
[  150.033445] R10: ffffc9000f1ebb68 R11: ffffc9000f1ebb60 R12: 0000000000000000
[  150.044204] R13: ffff888125ed50d8 R14: 0000000000000080 R15: 34cdc00034cdea80
[  150.054963] FS:  0000000000000000(0000) GS:ffff88dfaf200000(0000) knlGS:0000000000000000
[  150.066715] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  150.076078] CR2: 00000007fffc445d CR3: 000000012448a006 CR4: 0000000000770ee0
[  150.086887] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  150.097670] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  150.108323] PKRU: 55555554
[  150.114690] Call Trace:
[  150.120497]  ? printk+0x48/0x4a
[  150.127049]  mpt3sas_scsih_issue_tm.cold.114+0x2e/0x2b3 [mpt3sas]
[  150.136453]  mpt3sas_scsih_issue_locked_tm+0x86/0xb0 [mpt3sas]
[  150.145759]  scsih_dev_reset+0xea/0x300 [mpt3sas]
[  150.153891]  scsi_eh_ready_devs+0x541/0x9e0 [scsi_mod]
[  150.162206]  ? __scsi_host_match+0x20/0x20 [scsi_mod]
[  150.170406]  ? scsi_try_target_reset+0x90/0x90 [scsi_mod]
[  150.178925]  ? blk_mq_tagset_busy_iter+0x45/0x60
[  150.186638]  ? scsi_try_target_reset+0x90/0x90 [scsi_mod]
[  150.195087]  scsi_error_handler+0x3a5/0x4a0 [scsi_mod]
[  150.203206]  ? __schedule+0x1e9/0x610
[  150.209783]  ? scsi_eh_get_sense+0x210/0x210 [scsi_mod]
[  150.217924]  kthread+0x12e/0x150
[  150.224041]  ? kthread_worker_fn+0x130/0x130
[  150.231206]  ret_from_fork+0x1f/0x30

This is caused by mpt3sas_base_sync_reply_irqs() using an invalid reply_q
pointer outside of the list_for_each_entry() loop. At the end of the full
list traversal the pointer is invalid.

Move the _base_process_reply_queue() call inside of the loop.

Link: https://lore.kernel.org/r/d625deae-a958-0ace-2ba3-0888dd0a415b@ddn.com
Fixes: 711a923c14d9 ("scsi: mpt3sas: Postprocessing of target and LUN reset")
Cc: stable@vger.kernel.org
Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Matt Lupfer <mlupfer@ddn.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/mpt3sas/mpt3sas_base.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -2011,9 +2011,10 @@ mpt3sas_base_sync_reply_irqs(struct MPT3
 				enable_irq(reply_q->os_irq);
 			}
 		}
+
+		if (poll)
+			_base_process_reply_queue(reply_q);
 	}
-	if (poll)
-		_base_process_reply_queue(reply_q);
 }
 
 /**

[PATCH 5.16 32/37] Input: aiptek - properly check endpoint type

[Greg Kroah-Hartman]

From: Pavel Skripkin <paskripkin@gmail.com>

commit 5600f6986628dde8881734090588474f54a540a8 upstream.

Syzbot reported warning in usb_submit_urb() which is caused by wrong
endpoint type. There was a check for the number of endpoints, but not
for the type of endpoint.

Fix it by replacing old desc.bNumEndpoints check with
usb_find_common_endpoints() helper for finding endpoints

Fail log:

usb 5-1: BOGUS urb xfer, pipe 1 != type 3
WARNING: CPU: 2 PID: 48 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
Modules linked in:
CPU: 2 PID: 48 Comm: kworker/2:2 Not tainted 5.17.0-rc6-syzkaller-00226-g07ebd38a0da2 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
Workqueue: usb_hub_wq hub_event
...
Call Trace:
 <TASK>
 aiptek_open+0xd5/0x130 drivers/input/tablet/aiptek.c:830
 input_open_device+0x1bb/0x320 drivers/input/input.c:629
 kbd_connect+0xfe/0x160 drivers/tty/vt/keyboard.c:1593

Fixes: 8e20cf2bce12 ("Input: aiptek - fix crash on detecting device without endpoints")
Reported-and-tested-by: syzbot+75cccf2b7da87fb6f84b@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20220308194328.26220-1-paskripkin@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/input/tablet/aiptek.c |   10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

--- a/drivers/input/tablet/aiptek.c
+++ b/drivers/input/tablet/aiptek.c
@@ -1787,15 +1787,13 @@ aiptek_probe(struct usb_interface *intf,
 	input_set_abs_params(inputdev, ABS_TILT_Y, AIPTEK_TILT_MIN, AIPTEK_TILT_MAX, 0, 0);
 	input_set_abs_params(inputdev, ABS_WHEEL, AIPTEK_WHEEL_MIN, AIPTEK_WHEEL_MAX - 1, 0, 0);
 
-	/* Verify that a device really has an endpoint */
-	if (intf->cur_altsetting->desc.bNumEndpoints < 1) {
+	err = usb_find_common_endpoints(intf->cur_altsetting,
+					NULL, NULL, &endpoint, NULL);
+	if (err) {
 		dev_err(&intf->dev,
-			"interface has %d endpoints, but must have minimum 1\n",
-			intf->cur_altsetting->desc.bNumEndpoints);
-		err = -EINVAL;
+			"interface has no int in endpoints, but must have minimum 1\n");
 		goto fail3;
 	}
-	endpoint = &intf->cur_altsetting->endpoint[0].desc;
 
 	/* Go set up our URB, which is called when the tablet receives
 	 * input.

[PATCH 5.16 33/37] arm64: errata: avoid duplicate field initializer

[Greg Kroah-Hartman]

From: Arnd Bergmann <arnd@arndb.de>

commit 316e46f65a5497839857db08b6fbf60f568b165a upstream.

The '.type' field is initialized both in place and in the macro
as reported by this W=1 warning:

arch/arm64/include/asm/cpufeature.h:281:9: error: initialized field overwritten [-Werror=override-init]
  281 |         (ARM64_CPUCAP_SCOPE_LOCAL_CPU | ARM64_CPUCAP_OPTIONAL_FOR_LATE_CPU)
      |         ^
arch/arm64/kernel/cpu_errata.c:136:17: note: in expansion of macro 'ARM64_CPUCAP_LOCAL_CPU_ERRATUM'
  136 |         .type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,                         \
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/arm64/kernel/cpu_errata.c:145:9: note: in expansion of macro 'ERRATA_MIDR_RANGE'
  145 |         ERRATA_MIDR_RANGE(m, var, r_min, var, r_max)
      |         ^~~~~~~~~~~~~~~~~
arch/arm64/kernel/cpu_errata.c:613:17: note: in expansion of macro 'ERRATA_MIDR_REV_RANGE'
  613 |                 ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A510, 0, 0, 2),
      |                 ^~~~~~~~~~~~~~~~~~~~~
arch/arm64/include/asm/cpufeature.h:281:9: note: (near initialization for 'arm64_errata[18].type')
  281 |         (ARM64_CPUCAP_SCOPE_LOCAL_CPU | ARM64_CPUCAP_OPTIONAL_FOR_LATE_CPU)
      |         ^

Remove the extranous initializer.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 1dd498e5e26a ("KVM: arm64: Workaround Cortex-A510's single-step and PAC trap errata")
Link: https://lore.kernel.org/r/20220316183800.1546731-1-arnd@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/kernel/cpu_errata.c |    1 -
 1 file changed, 1 deletion(-)

--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -611,7 +611,6 @@ const struct arm64_cpu_capabilities arm6
 	{
 		.desc = "ARM erratum 2077057",
 		.capability = ARM64_WORKAROUND_2077057,
-		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
 		ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A510, 0, 0, 2),
 	},
 #endif

[PATCH 5.16 34/37] perf symbols: Fix symbol size calculation condition

[Greg Kroah-Hartman]

From: Michael Petlan <mpetlan@redhat.com>

commit 3cf6a32f3f2a45944dd5be5c6ac4deb46bcd3bee upstream.

Before this patch, the symbol end address fixup to be called, needed two
conditions being met:

  if (prev->end == prev->start && prev->end != curr->start)

Where
  "prev->end == prev->start" means that prev is zero-long
                             (and thus needs a fixup)
and
  "prev->end != curr->start" means that fixup hasn't been applied yet

However, this logic is incorrect in the following situation:

*curr  = {rb_node = {__rb_parent_color = 278218928,
  rb_right = 0x0, rb_left = 0x0},
  start = 0xc000000000062354,
  end = 0xc000000000062354, namelen = 40, type = 2 '\002',
  binding = 0 '\000', idle = 0 '\000', ignore = 0 '\000',
  inlined = 0 '\000', arch_sym = 0 '\000', annotate2 = false,
  name = 0x1159739e "kprobe_optinsn_page\t[__builtin__kprobes]"}

*prev = {rb_node = {__rb_parent_color = 278219041,
  rb_right = 0x109548b0, rb_left = 0x109547c0},
  start = 0xc000000000062354,
  end = 0xc000000000062354, namelen = 12, type = 2 '\002',
  binding = 1 '\001', idle = 0 '\000', ignore = 0 '\000',
  inlined = 0 '\000', arch_sym = 0 '\000', annotate2 = false,
  name = 0x1095486e "optinsn_slot"}

In this case, prev->start == prev->end == curr->start == curr->end,
thus the condition above thinks that "we need a fixup due to zero
length of prev symbol, but it has been probably done, since the
prev->end == curr->start", which is wrong.

After the patch, the execution path proceeds to arch__symbols__fixup_end
function which fixes up the size of prev symbol by adding page_size to
its end offset.

Fixes: 3b01a413c196c910 ("perf symbols: Improve kallsyms symbol end addr calculation")
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20220317135536.805-1-mpetlan@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/perf/util/symbol.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -231,7 +231,7 @@ void symbols__fixup_end(struct rb_root_c
 		prev = curr;
 		curr = rb_entry(nd, struct symbol, rb_node);
 
-		if (prev->end == prev->start && prev->end != curr->start)
+		if (prev->end == prev->start || prev->end != curr->start)
 			arch__symbols__fixup_end(prev, curr);
 	}
 

[PATCH 5.16 35/37] Revert "arm64: dts: freescale: Fix interrupt-map parent address cells"

[Greg Kroah-Hartman]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

commit 1447c635802fd0f5e213ad5277753108d56a4db3 upstream.

This reverts commit 869f0ec048dc8fd88c0b2003373bd985795179fb. That
updated the expected device tree binding format for the ls-extirq
driver, without also updating the parsing code (ls_extirq_parse_map)
to the new format.

The context is that the ls-extirq driver uses the standard
"interrupt-map" OF property in a non-standard way, as suggested by
Rob Herring during review:
https://lore.kernel.org/lkml/20190927161118.GA19333@bogus/

This has turned out to be problematic, as Marc Zyngier discovered
through commit 041284181226 ("of/irq: Allow matching of an interrupt-map
local to an interrupt controller"), later fixed through commit
de4adddcbcc2 ("of/irq: Add a quirk for controllers with their own
definition of interrupt-map"). Marc's position, expressed on multiple
opportunities, is that:

(a) [ making private use of the reserved "interrupt-map" name in a
    driver ] "is wrong, by the very letter of what an interrupt-map
    means. If the interrupt map points to an interrupt controller,
    that's the target for the interrupt."
https://lore.kernel.org/lkml/87k0g8jlmg.wl-maz@kernel.org/

(b) [ updating the driver's bindings to accept a non-reserved name for
    this property, as an alternative, is ] "is totally pointless. These
    machines have been in the wild for years, and existing DTs will be
    there *forever*."
https://lore.kernel.org/lkml/87ilvrk1r0.wl-maz@kernel.org/

Considering the above, the Linux kernel has quirks in place to deal with
the ls-extirq's non-standard use of the "interrupt-map". These quirks
may be needed in other operating systems that consume this device tree,
yet this is seen as the only viable solution.

Therefore, the premise of the patch being reverted here is invalid.
It doesn't matter whether the driver, in its non-standard use of the
property, complies to the standard format or not, since this property
isn't expected to be used for interrupt translation by the core.

This change restores LS1088A, LS2088A/LS2085A and LX2160A to their
previous bindings, which allows these systems to continue to use
external interrupt lines with the correct polarity.

Fixes: 869f0ec048dc ("arm64: dts: freescale: Fix 'interrupt-map' parent address cells")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi |   24 ++++++++++++------------
 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi |   24 ++++++++++++------------
 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi |   24 ++++++++++++------------
 3 files changed, 36 insertions(+), 36 deletions(-)

--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -241,18 +241,18 @@
 				interrupt-controller;
 				reg = <0x14 4>;
 				interrupt-map =
-					<0 0 &gic 0 0 GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-					<1 0 &gic 0 0 GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-					<2 0 &gic 0 0 GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-					<3 0 &gic 0 0 GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-					<4 0 &gic 0 0 GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-					<5 0 &gic 0 0 GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-					<6 0 &gic 0 0 GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
-					<7 0 &gic 0 0 GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-					<8 0 &gic 0 0 GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-					<9 0 &gic 0 0 GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-					<10 0 &gic 0 0 GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-					<11 0 &gic 0 0 GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+					<0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+					<1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+					<2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+					<3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+					<4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+					<5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+					<6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					<7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+					<8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					<9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+					<10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+					<11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-map-mask = <0xffffffff 0x0>;
 			};
 		};
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -293,18 +293,18 @@
 				interrupt-controller;
 				reg = <0x14 4>;
 				interrupt-map =
-					<0 0 &gic 0 0 GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-					<1 0 &gic 0 0 GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-					<2 0 &gic 0 0 GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-					<3 0 &gic 0 0 GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-					<4 0 &gic 0 0 GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-					<5 0 &gic 0 0 GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-					<6 0 &gic 0 0 GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
-					<7 0 &gic 0 0 GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-					<8 0 &gic 0 0 GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-					<9 0 &gic 0 0 GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-					<10 0 &gic 0 0 GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-					<11 0 &gic 0 0 GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+					<0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+					<1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+					<2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+					<3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+					<4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+					<5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+					<6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					<7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+					<8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					<9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+					<10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+					<11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-map-mask = <0xffffffff 0x0>;
 			};
 		};
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -680,18 +680,18 @@
 				interrupt-controller;
 				reg = <0x14 4>;
 				interrupt-map =
-					<0 0 &gic 0 0 GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-					<1 0 &gic 0 0 GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-					<2 0 &gic 0 0 GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-					<3 0 &gic 0 0 GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-					<4 0 &gic 0 0 GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-					<5 0 &gic 0 0 GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-					<6 0 &gic 0 0 GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
-					<7 0 &gic 0 0 GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-					<8 0 &gic 0 0 GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-					<9 0 &gic 0 0 GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-					<10 0 &gic 0 0 GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-					<11 0 &gic 0 0 GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+					<0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+					<1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+					<2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+					<3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+					<4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+					<5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+					<6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					<7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+					<8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					<9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+					<10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+					<11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-map-mask = <0xffffffff 0x0>;
 			};
 		};

[PATCH 5.16 36/37] Revert "ath10k: drop beacon and probe response which leak from other channel"

[Greg Kroah-Hartman]

From: Kalle Valo <quic_kvalo@quicinc.com>

commit 45b4eb7ee6aa1a55a50831b328aa5f46ac3a7187 upstream.

This reverts commit 3bf2537ec2e33310b431b53fd84be8833736c256.

I was reported privately that this commit breaks AP and mesh mode on QCA9984
(firmware 10.4-3.9.0.2-00156). So revert the commit to fix the regression.

There was a conflict due to cfg80211 API changes but that was easy to fix.

Fixes: 3bf2537ec2e3 ("ath10k: drop beacon and probe response which leak from other channel")
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220315155455.20446-1-kvalo@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wireless/ath/ath10k/wmi.c |   27 +--------------------------
 1 file changed, 1 insertion(+), 26 deletions(-)

--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -2611,30 +2611,9 @@ int ath10k_wmi_event_mgmt_rx(struct ath1
 		ath10k_mac_handle_beacon(ar, skb);
 
 	if (ieee80211_is_beacon(hdr->frame_control) ||
-	    ieee80211_is_probe_resp(hdr->frame_control)) {
-		struct ieee80211_mgmt *mgmt = (void *)skb->data;
-		u8 *ies;
-		int ies_ch;
-
+	    ieee80211_is_probe_resp(hdr->frame_control))
 		status->boottime_ns = ktime_get_boottime_ns();
 
-		if (!ar->scan_channel)
-			goto drop;
-
-		ies = mgmt->u.beacon.variable;
-
-		ies_ch = cfg80211_get_ies_channel_number(mgmt->u.beacon.variable,
-							 skb_tail_pointer(skb) - ies,
-							 sband->band);
-
-		if (ies_ch > 0 && ies_ch != channel) {
-			ath10k_dbg(ar, ATH10K_DBG_MGMT,
-				   "channel mismatched ds channel %d scan channel %d\n",
-				   ies_ch, channel);
-			goto drop;
-		}
-	}
-
 	ath10k_dbg(ar, ATH10K_DBG_MGMT,
 		   "event mgmt rx skb %pK len %d ftype %02x stype %02x\n",
 		   skb, skb->len,
@@ -2648,10 +2627,6 @@ int ath10k_wmi_event_mgmt_rx(struct ath1
 	ieee80211_rx_ni(ar->hw, skb);
 
 	return 0;
-
-drop:
-	dev_kfree_skb(skb);
-	return 0;
 }
 
 static int freq_to_idx(struct ath10k *ar, int freq)

[PATCH 5.16 37/37] btrfs: skip reserved bytes warning on unmount after log cleanup failure

[Greg Kroah-Hartman]

From: Filipe Manana <fdmanana@suse.com>

commit 40cdc509877bacb438213b83c7541c5e24a1d9ec upstream.

After the recent changes made by commit c2e39305299f01 ("btrfs: clear
extent buffer uptodate when we fail to write it") and its followup fix,
commit 651740a5024117 ("btrfs: check WRITE_ERR when trying to read an
extent buffer"), we can now end up not cleaning up space reservations of
log tree extent buffers after a transaction abort happens, as well as not
cleaning up still dirty extent buffers.

This happens because if writeback for a log tree extent buffer failed,
then we have cleared the bit EXTENT_BUFFER_UPTODATE from the extent buffer
and we have also set the bit EXTENT_BUFFER_WRITE_ERR on it. Later on,
when trying to free the log tree with free_log_tree(), which iterates
over the tree, we can end up getting an -EIO error when trying to read
a node or a leaf, since read_extent_buffer_pages() returns -EIO if an
extent buffer does not have EXTENT_BUFFER_UPTODATE set and has the
EXTENT_BUFFER_WRITE_ERR bit set. Getting that -EIO means that we return
immediately as we can not iterate over the entire tree.

In that case we never update the reserved space for an extent buffer in
the respective block group and space_info object.

When this happens we get the following traces when unmounting the fs:

[174957.284509] BTRFS: error (device dm-0) in cleanup_transaction:1913: errno=-5 IO failure
[174957.286497] BTRFS: error (device dm-0) in free_log_tree:3420: errno=-5 IO failure
[174957.399379] ------------[ cut here ]------------
[174957.402497] WARNING: CPU: 2 PID: 3206883 at fs/btrfs/block-group.c:127 btrfs_put_block_group+0x77/0xb0 [btrfs]
[174957.407523] Modules linked in: btrfs overlay dm_zero (...)
[174957.424917] CPU: 2 PID: 3206883 Comm: umount Tainted: G        W         5.16.0-rc5-btrfs-next-109 #1
[174957.426689] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[174957.428716] RIP: 0010:btrfs_put_block_group+0x77/0xb0 [btrfs]
[174957.429717] Code: 21 48 8b bd (...)
[174957.432867] RSP: 0018:ffffb70d41cffdd0 EFLAGS: 00010206
[174957.433632] RAX: 0000000000000001 RBX: ffff8b09c3848000 RCX: ffff8b0758edd1c8
[174957.434689] RDX: 0000000000000001 RSI: ffffffffc0b467e7 RDI: ffff8b0758edd000
[174957.436068] RBP: ffff8b0758edd000 R08: 0000000000000000 R09: 0000000000000000
[174957.437114] R10: 0000000000000246 R11: 0000000000000000 R12: ffff8b09c3848148
[174957.438140] R13: ffff8b09c3848198 R14: ffff8b0758edd188 R15: dead000000000100
[174957.439317] FS:  00007f328fb82800(0000) GS:ffff8b0a2d200000(0000) knlGS:0000000000000000
[174957.440402] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[174957.441164] CR2: 00007fff13563e98 CR3: 0000000404f4e005 CR4: 0000000000370ee0
[174957.442117] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[174957.443076] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[174957.443948] Call Trace:
[174957.444264]  <TASK>
[174957.444538]  btrfs_free_block_groups+0x255/0x3c0 [btrfs]
[174957.445238]  close_ctree+0x301/0x357 [btrfs]
[174957.445803]  ? call_rcu+0x16c/0x290
[174957.446250]  generic_shutdown_super+0x74/0x120
[174957.446832]  kill_anon_super+0x14/0x30
[174957.447305]  btrfs_kill_super+0x12/0x20 [btrfs]
[174957.447890]  deactivate_locked_super+0x31/0xa0
[174957.448440]  cleanup_mnt+0x147/0x1c0
[174957.448888]  task_work_run+0x5c/0xa0
[174957.449336]  exit_to_user_mode_prepare+0x1e5/0x1f0
[174957.449934]  syscall_exit_to_user_mode+0x16/0x40
[174957.450512]  do_syscall_64+0x48/0xc0
[174957.450980]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[174957.451605] RIP: 0033:0x7f328fdc4a97
[174957.452059] Code: 03 0c 00 f7 (...)
[174957.454320] RSP: 002b:00007fff13564ec8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
[174957.455262] RAX: 0000000000000000 RBX: 00007f328feea264 RCX: 00007f328fdc4a97
[174957.456131] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000560b8ae51dd0
[174957.457118] RBP: 0000560b8ae51ba0 R08: 0000000000000000 R09: 00007fff13563c40
[174957.458005] R10: 00007f328fe49fc0 R11: 0000000000000246 R12: 0000000000000000
[174957.459113] R13: 0000560b8ae51dd0 R14: 0000560b8ae51cb0 R15: 0000000000000000
[174957.460193]  </TASK>
[174957.460534] irq event stamp: 0
[174957.461003] hardirqs last  enabled at (0): [<0000000000000000>] 0x0
[174957.461947] hardirqs last disabled at (0): [<ffffffffb0e94214>] copy_process+0x934/0x2040
[174957.463147] softirqs last  enabled at (0): [<ffffffffb0e94214>] copy_process+0x934/0x2040
[174957.465116] softirqs last disabled at (0): [<0000000000000000>] 0x0
[174957.466323] ---[ end trace bc7ee0c490bce3af ]---
[174957.467282] ------------[ cut here ]------------
[174957.468184] WARNING: CPU: 2 PID: 3206883 at fs/btrfs/block-group.c:3976 btrfs_free_block_groups+0x330/0x3c0 [btrfs]
[174957.470066] Modules linked in: btrfs overlay dm_zero (...)
[174957.483137] CPU: 2 PID: 3206883 Comm: umount Tainted: G        W         5.16.0-rc5-btrfs-next-109 #1
[174957.484691] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[174957.486853] RIP: 0010:btrfs_free_block_groups+0x330/0x3c0 [btrfs]
[174957.488050] Code: 00 00 00 ad de (...)
[174957.491479] RSP: 0018:ffffb70d41cffde0 EFLAGS: 00010206
[174957.492520] RAX: ffff8b08d79310b0 RBX: ffff8b09c3848000 RCX: 0000000000000000
[174957.493868] RDX: 0000000000000001 RSI: fffff443055ee600 RDI: ffffffffb1131846
[174957.495183] RBP: ffff8b08d79310b0 R08: 0000000000000000 R09: 0000000000000000
[174957.496580] R10: 0000000000000001 R11: 0000000000000000 R12: ffff8b08d7931000
[174957.498027] R13: ffff8b09c38492b0 R14: dead000000000122 R15: dead000000000100
[174957.499438] FS:  00007f328fb82800(0000) GS:ffff8b0a2d200000(0000) knlGS:0000000000000000
[174957.500990] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[174957.502117] CR2: 00007fff13563e98 CR3: 0000000404f4e005 CR4: 0000000000370ee0
[174957.503513] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[174957.504864] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[174957.506167] Call Trace:
[174957.506654]  <TASK>
[174957.507047]  close_ctree+0x301/0x357 [btrfs]
[174957.507867]  ? call_rcu+0x16c/0x290
[174957.508567]  generic_shutdown_super+0x74/0x120
[174957.509447]  kill_anon_super+0x14/0x30
[174957.510194]  btrfs_kill_super+0x12/0x20 [btrfs]
[174957.511123]  deactivate_locked_super+0x31/0xa0
[174957.511976]  cleanup_mnt+0x147/0x1c0
[174957.512610]  task_work_run+0x5c/0xa0
[174957.513309]  exit_to_user_mode_prepare+0x1e5/0x1f0
[174957.514231]  syscall_exit_to_user_mode+0x16/0x40
[174957.515069]  do_syscall_64+0x48/0xc0
[174957.515718]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[174957.516688] RIP: 0033:0x7f328fdc4a97
[174957.517413] Code: 03 0c 00 f7 d8 (...)
[174957.521052] RSP: 002b:00007fff13564ec8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
[174957.522514] RAX: 0000000000000000 RBX: 00007f328feea264 RCX: 00007f328fdc4a97
[174957.523950] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000560b8ae51dd0
[174957.525375] RBP: 0000560b8ae51ba0 R08: 0000000000000000 R09: 00007fff13563c40
[174957.526763] R10: 00007f328fe49fc0 R11: 0000000000000246 R12: 0000000000000000
[174957.528058] R13: 0000560b8ae51dd0 R14: 0000560b8ae51cb0 R15: 0000000000000000
[174957.529404]  </TASK>
[174957.529843] irq event stamp: 0
[174957.530256] hardirqs last  enabled at (0): [<0000000000000000>] 0x0
[174957.531061] hardirqs last disabled at (0): [<ffffffffb0e94214>] copy_process+0x934/0x2040
[174957.532075] softirqs last  enabled at (0): [<ffffffffb0e94214>] copy_process+0x934/0x2040
[174957.533083] softirqs last disabled at (0): [<0000000000000000>] 0x0
[174957.533865] ---[ end trace bc7ee0c490bce3b0 ]---
[174957.534452] BTRFS info (device dm-0): space_info 4 has 1070841856 free, is not full
[174957.535404] BTRFS info (device dm-0): space_info total=1073741824, used=2785280, pinned=0, reserved=49152, may_use=0, readonly=65536 zone_unusable=0
[174957.537029] BTRFS info (device dm-0): global_block_rsv: size 0 reserved 0
[174957.537859] BTRFS info (device dm-0): trans_block_rsv: size 0 reserved 0
[174957.538697] BTRFS info (device dm-0): chunk_block_rsv: size 0 reserved 0
[174957.539552] BTRFS info (device dm-0): delayed_block_rsv: size 0 reserved 0
[174957.540403] BTRFS info (device dm-0): delayed_refs_rsv: size 0 reserved 0

This also means that in case we have log tree extent buffers that are
still dirty, we can end up not cleaning them up in case we find an
extent buffer with EXTENT_BUFFER_WRITE_ERR set on it, as in that case
we have no way for iterating over the rest of the tree.

This issue is very often triggered with test cases generic/475 and
generic/648 from fstests.

The issue could almost be fixed by iterating over the io tree attached to
each log root which keeps tracks of the range of allocated extent buffers,
log_root->dirty_log_pages, however that does not work and has some
inconveniences:

1) After we sync the log, we clear the range of the extent buffers from
   the io tree, so we can't find them after writeback. We could keep the
   ranges in the io tree, with a separate bit to signal they represent
   extent buffers already written, but that means we need to hold into
   more memory until the transaction commits.

   How much more memory is used depends a lot on whether we are able to
   allocate contiguous extent buffers on disk (and how often) for a log
   tree - if we are able to, then a single extent state record can
   represent multiple extent buffers, otherwise we need multiple extent
   state record structures to track each extent buffer.
   In fact, my earlier approach did that:

   https://lore.kernel.org/linux-btrfs/3aae7c6728257c7ce2279d6660ee2797e5e34bbd.1641300250.git.fdmanana@suse.com/

   However that can cause a very significant negative impact on
   performance, not only due to the extra memory usage but also because
   we get a larger and deeper dirty_log_pages io tree.
   We got a report that, on beefy machines at least, we can get such
   performance drop with fsmark for example:

   https://lore.kernel.org/linux-btrfs/20220117082426.GE32491@xsang-OptiPlex-9020/

2) We would be doing it only to deal with an unexpected and exceptional
   case, which is basically failure to read an extent buffer from disk
   due to IO failures. On a healthy system we don't expect transaction
   aborts to happen after all;

3) Instead of relying on iterating the log tree or tracking the ranges
   of extent buffers in the dirty_log_pages io tree, using the radix
   tree that tracks extent buffers (fs_info->buffer_radix) to find all
   log tree extent buffers is not reliable either, because after writeback
   of an extent buffer it can be evicted from memory by the release page
   callback of the btree inode (btree_releasepage()).

Since there's no way to be able to properly cleanup a log tree without
being able to read its extent buffers from disk and without using more
memory to track the logical ranges of the allocated extent buffers do
the following:

1) When we fail to cleanup a log tree, setup a flag that indicates that
   failure;

2) Trigger writeback of all log tree extent buffers that are still dirty,
   and wait for the writeback to complete. This is just to cleanup their
   state, page states, page leaks, etc;

3) When unmounting the fs, ignore if the number of bytes reserved in a
   block group and in a space_info is not 0 if, and only if, we failed to
   cleanup a log tree. Also ignore only for metadata block groups and the
   metadata space_info object.

This is far from a perfect solution, but it serves to silence test
failures such as those from generic/475 and generic/648. However having
a non-zero value for the reserved bytes counters on unmount after a
transaction abort, is not such a terrible thing and it's completely
harmless, it does not affect the filesystem integrity in any way.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 fs/btrfs/block-group.c |   26 ++++++++++++++++++++++++--
 fs/btrfs/ctree.h       |    7 +++++++
 fs/btrfs/tree-log.c    |   23 +++++++++++++++++++++++
 3 files changed, 54 insertions(+), 2 deletions(-)

--- a/fs/btrfs/block-group.c
+++ b/fs/btrfs/block-group.c
@@ -124,7 +124,16 @@ void btrfs_put_block_group(struct btrfs_
 {
 	if (refcount_dec_and_test(&cache->refs)) {
 		WARN_ON(cache->pinned > 0);
-		WARN_ON(cache->reserved > 0);
+		/*
+		 * If there was a failure to cleanup a log tree, very likely due
+		 * to an IO failure on a writeback attempt of one or more of its
+		 * extent buffers, we could not do proper (and cheap) unaccounting
+		 * of their reserved space, so don't warn on reserved > 0 in that
+		 * case.
+		 */
+		if (!(cache->flags & BTRFS_BLOCK_GROUP_METADATA) ||
+		    !BTRFS_FS_LOG_CLEANUP_ERROR(cache->fs_info))
+			WARN_ON(cache->reserved > 0);
 
 		/*
 		 * A block_group shouldn't be on the discard_list anymore.
@@ -3987,9 +3996,22 @@ int btrfs_free_block_groups(struct btrfs
 		 * important and indicates a real bug if this happens.
 		 */
 		if (WARN_ON(space_info->bytes_pinned > 0 ||
-			    space_info->bytes_reserved > 0 ||
 			    space_info->bytes_may_use > 0))
 			btrfs_dump_space_info(info, space_info, 0, 0);
+
+		/*
+		 * If there was a failure to cleanup a log tree, very likely due
+		 * to an IO failure on a writeback attempt of one or more of its
+		 * extent buffers, we could not do proper (and cheap) unaccounting
+		 * of their reserved space, so don't warn on bytes_reserved > 0 in
+		 * that case.
+		 */
+		if (!(space_info->flags & BTRFS_BLOCK_GROUP_METADATA) ||
+		    !BTRFS_FS_LOG_CLEANUP_ERROR(info)) {
+			if (WARN_ON(space_info->bytes_reserved > 0))
+				btrfs_dump_space_info(info, space_info, 0, 0);
+		}
+
 		WARN_ON(space_info->reclaim_size > 0);
 		list_del(&space_info->list);
 		btrfs_sysfs_remove_space_info(space_info);
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -143,6 +143,9 @@ enum {
 	BTRFS_FS_STATE_DEV_REPLACING,
 	/* The btrfs_fs_info created for self-tests */
 	BTRFS_FS_STATE_DUMMY_FS_INFO,
+
+	/* Indicates there was an error cleaning up a log tree. */
+	BTRFS_FS_STATE_LOG_CLEANUP_ERROR,
 };
 
 #define BTRFS_BACKREF_REV_MAX		256
@@ -3585,6 +3588,10 @@ static inline void btrfs_print_v0_err(st
 "Unsupported V0 extent filesystem detected. Aborting. Please re-create your filesystem with a newer kernel");
 }
 
+#define BTRFS_FS_LOG_CLEANUP_ERROR(fs_info)				\
+	(unlikely(test_bit(BTRFS_FS_STATE_LOG_CLEANUP_ERROR,		\
+			   &(fs_info)->fs_state)))
+
 __printf(5, 6)
 __cold
 void __btrfs_handle_fs_error(struct btrfs_fs_info *fs_info, const char *function,
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -3449,6 +3449,29 @@ static void free_log_tree(struct btrfs_t
 	if (log->node) {
 		ret = walk_log_tree(trans, log, &wc);
 		if (ret) {
+			/*
+			 * We weren't able to traverse the entire log tree, the
+			 * typical scenario is getting an -EIO when reading an
+			 * extent buffer of the tree, due to a previous writeback
+			 * failure of it.
+			 */
+			set_bit(BTRFS_FS_STATE_LOG_CLEANUP_ERROR,
+				&log->fs_info->fs_state);
+
+			/*
+			 * Some extent buffers of the log tree may still be dirty
+			 * and not yet written back to storage, because we may
+			 * have updates to a log tree without syncing a log tree,
+			 * such as during rename and link operations. So flush
+			 * them out and wait for their writeback to complete, so
+			 * that we properly cleanup their state and pages.
+			 */
+			btrfs_write_marked_extents(log->fs_info,
+						   &log->dirty_log_pages,
+						   EXTENT_DIRTY | EXTENT_NEW);
+			btrfs_wait_tree_log_extents(log,
+						    EXTENT_DIRTY | EXTENT_NEW);
+
 			if (trans)
 				btrfs_abort_transaction(trans, ret);
 			else

Re: [PATCH 5.16 00/37] 5.16.17-rc1 review

[Florian Fainelli]

On 3/21/22 06:52, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.16.17 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 23 Mar 2022 13:32:09 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.17-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h


On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:

Tested-by: Florian Fainelli <f.fainelli@gmail.com>
-- 
Florian

Re: [PATCH 5.16 00/37] 5.16.17-rc1 review

[Jon Hunter]

On Mon, 21 Mar 2022 14:52:42 +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.16.17 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 23 Mar 2022 13:32:09 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.17-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v5.16:
    10 builds:	10 pass, 0 fail
    28 boots:	28 pass, 0 fail
    122 tests:	122 pass, 0 fail

Linux version:	5.16.17-rc1-g578d4cc6b157
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                tegra20-ventana, tegra210-p2371-2180,
                tegra210-p3450-0000, tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 5.16 00/37] 5.16.17-rc1 review

[Jeffrin Thalakkottoor]

On Mon, Mar 21, 2022 at 10:14 AM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.16.17 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 23 Mar 2022 13:32:09 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.17-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
hello,

Compiled and booted 5.16.17-rc1+ on...
Processor Information
    Socket Designation: FM2
    Type: Central Processor
    Family: A-Series
    Manufacturer: AuthenticAMD
    ID: 31 0F 61 00 FF FB 8B 17
    Signature: Family 21, Model 19, Stepping 1

output of "dmesg -l warn"

---------------------<output>--------------------------
$dmesg -l warn
[    0.007168] ACPI BIOS Warning (bug): Optional FADT field
Pm2ControlBlock has valid Length but zero Address:
0x0000000000000000/0x1 (20210930/tbfadt-615)
[    7.663451] amdgpu: CRAT table not found
[   49.488716] kauditd_printk_skb: 11 callbacks suppressed
$

---------------------<output>--------------------------


Tested-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>

-- 
software engineer
rajagiri school of engineering and technology

Re: [PATCH 5.16 00/37] 5.16.17-rc1 review

[Shuah Khan]

On 3/21/22 7:52 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.16.17 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 23 Mar 2022 13:32:09 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.17-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

RE: [PATCH 5.16 00/37] 5.16.17-rc1 review

[Fox Chen]

On Mon, 21 Mar 2022 14:52:42 +0100, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 5.16.17 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 23 Mar 2022 13:32:09 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.17-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

5.16.17-rc1 Successfully Compiled and booted on my Raspberry PI 4b (8g) (bcm2711)
                
Tested-by: Fox Chen <foxhlchen@gmail.com>

Re: [PATCH 5.16 00/37] 5.16.17-rc1 review

[Zan Aziz]

On Mon, Mar 21, 2022 at 9:51 AM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.16.17 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 23 Mar 2022 13:32:09 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.17-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Hi Greg,

Compiled and booted on my test system Lenovo P50s: Intel Core i7
No emergency and critical messages in the dmesg

./perf bench sched all
# Running sched/messaging benchmark...
# 20 sender and receiver processes per group
# 10 groups == 400 processes run

     Total time: 0.449 [sec]

# Running sched/pipe benchmark...
# Executed 1000000 pipe operations between two processes

     Total time: 10.436 [sec]

      10.436791 usecs/op
          95814 ops/sec

Tested-by: Zan Aziz <zanaziz313@gmail.com>

Thanks
-Zan

Re: [PATCH 5.16 00/37] 5.16.17-rc1 review

[Guenter Roeck]

On Mon, Mar 21, 2022 at 02:52:42PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.16.17 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Wed, 23 Mar 2022 13:32:09 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 155 pass: 155 fail: 0
Qemu test results:
	total: 488 pass: 488 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter

Re: [PATCH 5.16 00/37] 5.16.17-rc1 review

[Ron Economos]

On 3/21/22 6:52 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.16.17 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 23 Mar 2022 13:32:09 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.17-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Built and booted successfully on RISC-V RV64 (HiFive Unmatched).

Tested-by: Ron Economos <re@w6rz.net>

Re: [PATCH 5.16 00/37] 5.16.17-rc1 review

[Naresh Kamboju]

On Mon, 21 Mar 2022 at 19:31, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.16.17 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed, 23 Mar 2022 13:32:09 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.16.17-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.16.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

## Build
* kernel: 5.16.17-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git branch: linux-5.16.y
* git commit: 578d4cc6b1572323d2f71bf43fa891b000a62087
* git describe: v5.16.16-38-g578d4cc6b157
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.16.y/build/v5.16.16-38-g578d4cc6b157

## Test Regressions (compared to v5.16.15-29-g3782384411f0)
No test regressions found.

## Metric Regressions (compared to v5.16.15-29-g3782384411f0)
No metric regressions found.

## Test Fixes (compared to v5.16.15-29-g3782384411f0)
No test fixes found.

## Metric Fixes (compared to v5.16.15-29-g3782384411f0)
No metric fixes found.

## Test result summary
total: 106594, pass: 90505, fail: 1196, skip: 13865, xfail: 1028

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 296 total, 293 passed, 3 failed
* arm64: 47 total, 47 passed, 0 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 45 total, 41 passed, 4 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 41 total, 38 passed, 3 failed
* parisc: 14 total, 14 passed, 0 failed
* powerpc: 65 total, 50 passed, 15 failed
* riscv: 32 total, 27 passed, 5 failed
* s390: 26 total, 23 passed, 3 failed
* sh: 26 total, 24 passed, 2 failed
* sparc: 14 total, 14 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 47 total, 47 passed, 0 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-
* kselftest-android
* kselftest-arm64
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* perf/Zstd-perf.data-compression
* pre[
* rcutorture
* ssuite
* v4l2-compliance
* vdso

--
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.16 00/37] 5.16.17-rc1 review

[Bagas Sanjaya]

On 21/03/22 20.52, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.16.17 release.
> There are 37 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 

Successfully cross-compiled for arm64 (bcm2711_defconfig, gcc 10.2.0)
and powerpc (ps3_defconfig, gcc 11.2.0).

Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>

-- 
An old man doll... just what I always wanted! - Clara