* [RFC] arm-toolchain: upgrade toolchains to 11.2-2002.02
@ 2022-03-22 13:43 Jon Mason
2022-03-22 17:30 ` [meta-arm] " Denys Dmytriyenko
0 siblings, 1 reply; 9+ messages in thread
From: Jon Mason @ 2022-03-22 13:43 UTC (permalink / raw)
To: meta-arm; +Cc: denis, Sumit Garg
There is a new and unified version of the toolchains (no longer the RM
and A toolchain split). Update the paths and SHAs to reflect the new
location.
NOTE: with this change, the binary toolchains do not appear to work
Signed-off-by: Jon Mason <jon.mason@arm.com>
---
ci/get-binary-toolchains | 13 ++++++----
...b => gcc-aarch64-none-elf_11.2-2022.02.bb} | 14 +++++------
.../gcc-arm-none-eabi_10.3-2021.10.bb | 20 ----------------
.../gcc-arm-none-eabi_11.2-2022.02.bb | 24 +++++++++++++++++++
4 files changed, 39 insertions(+), 32 deletions(-)
rename meta-arm-toolchain/recipes-devtools/external-arm-toolchain/{gcc-aarch64-none-elf_10.3-2021.07.bb => gcc-aarch64-none-elf_11.2-2022.02.bb} (61%)
delete mode 100644 meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
create mode 100644 meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
diff --git a/ci/get-binary-toolchains b/ci/get-binary-toolchains
index 838342a1c572..394ce4131b9f 100755
--- a/ci/get-binary-toolchains
+++ b/ci/get-binary-toolchains
@@ -2,7 +2,7 @@
set -u
HOST_ARCH=$(uname -m)
-VER="10.3-2021.07"
+VER="11.2-2022.02"
DOWNLOAD_DIR=$1
TOOLCHAIN_DIR=$2
@@ -15,18 +15,21 @@ if [ $HOST_ARCH = "aarch64" ]; then
#AArch64 Linux hosted cross compilers
#AArch32 target with hard float (arm-none-linux-gnueabihf)
- wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
+ wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
+
+ #AArch64 GNU/Linux target (aarch64-none-linux-gnu)
+ wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
elif [ $HOST_ARCH = "x86_64" ]; then
#x86_64 Linux hosted cross compilers
#AArch32 target with hard float (arm-linux-none-gnueabihf)
- wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
+ wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
#AArch64 GNU/Linux target (aarch64-none-linux-gnu)
- wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
+ wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
#AArch64 GNU/Linux target (aarch64_be-none-linux-gnu)
- wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
+ wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
else
echo "ERROR - Unknown build arch of $HOST_ARCH"
exit 1
diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
similarity index 61%
rename from meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
rename to meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
index 02b5b43bdd7e..a9e6b581a50e 100644
--- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
+++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
@@ -9,16 +9,16 @@ SUMMARY = "Baremetal GCC for Aarch64 processors"
LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
-LIC_FILES_CHKSUM:aarch64 = "file://share/doc/gcc/Copying.html;md5=d06ace534ed0851debcb7140c5b5116e"
-LIC_FILES_CHKSUM:x86-64 = "file://share/doc/gcc/Copying.html;md5=e4bcb5bee0c4a50c06704b0b73fcbe0c"
+LIC_FILES_CHKSUM:aarch64 = "file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
+LIC_FILES_CHKSUM:x86-64 = "file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
-PROVIDES = "virtual/aarch64-none-elf-gcc"
+PROVIDES = "virtual/${BINNAME}-gcc"
-SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-a/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
-SRC_URI[gnu-a-aarch64.sha256sum] = "768a5db41d93f48838f1c4bfeae26930df2320c09f0dfa798321082fb937955f"
-SRC_URI[gnu-a-x86_64.sha256sum] = "6f74b1ee370caeb716688d2e467e5b44727fdc0ed56023fe5c72c0620019ecef"
+SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
+SRC_URI[gnu-a-aarch64.sha256sum] = "3b15725545a0211a17b63e72d4f10241f7ffbe7ce94cb9612590ceacde16992c"
+SRC_URI[gnu-a-x86_64.sha256sum] = "b0a015a9e8cbb44ed2fe5ad755a7a7ae254d54f93df3bf47378485b0ba8b828b"
S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
-UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-a/downloads"
+UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
deleted file mode 100644
index ad7e81617d74..000000000000
--- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
+++ /dev/null
@@ -1,20 +0,0 @@
-# Copyright (C) 2019 Garmin Ltd. or its subsidiaries
-# Released under the MIT license (see COPYING.MIT for the terms)
-
-require arm-binary-toolchain.inc
-
-COMPATIBLE_HOST = "(x86_64|aarch64).*-linux"
-
-SUMMARY = "Baremetal GCC for ARM-R and ARM-M processors"
-LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
-
-LIC_FILES_CHKSUM = "file://share/doc/gcc-arm-none-eabi/license.txt;md5=c18349634b740b7b95f2c2159af888f5"
-
-PROVIDES = "virtual/arm-none-eabi-gcc"
-
-SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-rm/${PV}/${BP}-${HOST_ARCH}-linux.tar.bz2;name=gnu-rm-${HOST_ARCH}"
-SRC_URI[gnu-rm-aarch64.sha256sum] = "f605b5f23ca898e9b8b665be208510a54a6e9fdd0fa5bfc9592002f6e7431208"
-SRC_URI[gnu-rm-x86_64.sha256sum] = "97dbb4f019ad1650b732faffcc881689cedc14e2b7ee863d390e0a41ef16c9a3"
-
-UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-rm/downloads"
-UPSTREAM_CHECK_REGEX = "${BPN}-(?P<pver>.+)-${HOST_ARCH}-linux\.tar\.\w+"
diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
new file mode 100644
index 000000000000..4e9fe35789f9
--- /dev/null
+++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
@@ -0,0 +1,24 @@
+# Copyright (C) 2019 Garmin Ltd. or its subsidiaries
+# Released under the MIT license (see COPYING.MIT for the terms)
+
+require arm-binary-toolchain.inc
+
+COMPATIBLE_HOST = "(x86_64|aarch64).*-linux"
+
+SUMMARY = "Baremetal GCC for ARM-R and ARM-M processors"
+LICENSE = "GPL-3.0-with-GCC-exception & GPLv3"
+
+LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
+LIC_FILES_CHKSUM:aarch64 = "file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
+LIC_FILES_CHKSUM:x86-64 = "file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
+
+PROVIDES = "virtual/${BINNAME}-gcc"
+
+SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-rm-${HOST_ARCH}"
+SRC_URI[gnu-rm-aarch64.sha256sum] = "dd861d188f4061a7ef3857c948376f84ef1dfb88a32aded7c336ed7e47e60970"
+SRC_URI[gnu-rm-x86_64.sha256sum] = "8c5acd5ae567c0100245b0556941c237369f210bceb196edfe5a2e7532c60326"
+
+S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
+
+UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
+UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
--
2.30.2
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [meta-arm] [RFC] arm-toolchain: upgrade toolchains to 11.2-2002.02
2022-03-22 13:43 [RFC] arm-toolchain: upgrade toolchains to 11.2-2002.02 Jon Mason
@ 2022-03-22 17:30 ` Denys Dmytriyenko
2022-03-22 19:20 ` Jon Mason
0 siblings, 1 reply; 9+ messages in thread
From: Denys Dmytriyenko @ 2022-03-22 17:30 UTC (permalink / raw)
To: Jon Mason; +Cc: meta-arm, Sumit Garg
On Tue, Mar 22, 2022 at 09:43:27AM -0400, Jon Mason wrote:
> There is a new and unified version of the toolchains (no longer the RM
> and A toolchain split). Update the paths and SHAs to reflect the new
> location.
>
> NOTE: with this change, the binary toolchains do not appear to work
>
> Signed-off-by: Jon Mason <jon.mason@arm.com>
> ---
> ci/get-binary-toolchains | 13 ++++++----
> ...b => gcc-aarch64-none-elf_11.2-2022.02.bb} | 14 +++++------
> .../gcc-arm-none-eabi_10.3-2021.10.bb | 20 ----------------
> .../gcc-arm-none-eabi_11.2-2022.02.bb | 24 +++++++++++++++++++
> 4 files changed, 39 insertions(+), 32 deletions(-)
> rename meta-arm-toolchain/recipes-devtools/external-arm-toolchain/{gcc-aarch64-none-elf_10.3-2021.07.bb => gcc-aarch64-none-elf_11.2-2022.02.bb} (61%)
> delete mode 100644 meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> create mode 100644 meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
Any chance to lower the similarity threshold to make it a diff for review,
instead of remove/add?
> diff --git a/ci/get-binary-toolchains b/ci/get-binary-toolchains
> index 838342a1c572..394ce4131b9f 100755
> --- a/ci/get-binary-toolchains
> +++ b/ci/get-binary-toolchains
> @@ -2,7 +2,7 @@
> set -u
>
> HOST_ARCH=$(uname -m)
> -VER="10.3-2021.07"
> +VER="11.2-2022.02"
>
> DOWNLOAD_DIR=$1
> TOOLCHAIN_DIR=$2
> @@ -15,18 +15,21 @@ if [ $HOST_ARCH = "aarch64" ]; then
> #AArch64 Linux hosted cross compilers
>
> #AArch32 target with hard float (arm-none-linux-gnueabihf)
> - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> +
> + #AArch64 GNU/Linux target (aarch64-none-linux-gnu)
> + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> elif [ $HOST_ARCH = "x86_64" ]; then
> #x86_64 Linux hosted cross compilers
>
> #AArch32 target with hard float (arm-linux-none-gnueabihf)
> - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
>
> #AArch64 GNU/Linux target (aarch64-none-linux-gnu)
> - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
>
> #AArch64 GNU/Linux target (aarch64_be-none-linux-gnu)
> - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
> + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
> else
> echo "ERROR - Unknown build arch of $HOST_ARCH"
> exit 1
> diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> similarity index 61%
> rename from meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> rename to meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> index 02b5b43bdd7e..a9e6b581a50e 100644
> --- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> +++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> @@ -9,16 +9,16 @@ SUMMARY = "Baremetal GCC for Aarch64 processors"
> LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
>
> LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
> -LIC_FILES_CHKSUM:aarch64 = "file://share/doc/gcc/Copying.html;md5=d06ace534ed0851debcb7140c5b5116e"
> -LIC_FILES_CHKSUM:x86-64 = "file://share/doc/gcc/Copying.html;md5=e4bcb5bee0c4a50c06704b0b73fcbe0c"
> +LIC_FILES_CHKSUM:aarch64 = "file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
> +LIC_FILES_CHKSUM:x86-64 = "file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
>
> -PROVIDES = "virtual/aarch64-none-elf-gcc"
> +PROVIDES = "virtual/${BINNAME}-gcc"
>
> -SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-a/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
> -SRC_URI[gnu-a-aarch64.sha256sum] = "768a5db41d93f48838f1c4bfeae26930df2320c09f0dfa798321082fb937955f"
> -SRC_URI[gnu-a-x86_64.sha256sum] = "6f74b1ee370caeb716688d2e467e5b44727fdc0ed56023fe5c72c0620019ecef"
> +SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
> +SRC_URI[gnu-a-aarch64.sha256sum] = "3b15725545a0211a17b63e72d4f10241f7ffbe7ce94cb9612590ceacde16992c"
> +SRC_URI[gnu-a-x86_64.sha256sum] = "b0a015a9e8cbb44ed2fe5ad755a7a7ae254d54f93df3bf47378485b0ba8b828b"
>
> S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
>
> -UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-a/downloads"
> +UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
> UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
> diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> deleted file mode 100644
> index ad7e81617d74..000000000000
> --- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> +++ /dev/null
> @@ -1,20 +0,0 @@
> -# Copyright (C) 2019 Garmin Ltd. or its subsidiaries
> -# Released under the MIT license (see COPYING.MIT for the terms)
> -
> -require arm-binary-toolchain.inc
> -
> -COMPATIBLE_HOST = "(x86_64|aarch64).*-linux"
> -
> -SUMMARY = "Baremetal GCC for ARM-R and ARM-M processors"
> -LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
> -
> -LIC_FILES_CHKSUM = "file://share/doc/gcc-arm-none-eabi/license.txt;md5=c18349634b740b7b95f2c2159af888f5"
> -
> -PROVIDES = "virtual/arm-none-eabi-gcc"
> -
> -SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-rm/${PV}/${BP}-${HOST_ARCH}-linux.tar.bz2;name=gnu-rm-${HOST_ARCH}"
> -SRC_URI[gnu-rm-aarch64.sha256sum] = "f605b5f23ca898e9b8b665be208510a54a6e9fdd0fa5bfc9592002f6e7431208"
> -SRC_URI[gnu-rm-x86_64.sha256sum] = "97dbb4f019ad1650b732faffcc881689cedc14e2b7ee863d390e0a41ef16c9a3"
> -
> -UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-rm/downloads"
> -UPSTREAM_CHECK_REGEX = "${BPN}-(?P<pver>.+)-${HOST_ARCH}-linux\.tar\.\w+"
> diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> new file mode 100644
> index 000000000000..4e9fe35789f9
> --- /dev/null
> +++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> @@ -0,0 +1,24 @@
> +# Copyright (C) 2019 Garmin Ltd. or its subsidiaries
> +# Released under the MIT license (see COPYING.MIT for the terms)
> +
> +require arm-binary-toolchain.inc
> +
> +COMPATIBLE_HOST = "(x86_64|aarch64).*-linux"
> +
> +SUMMARY = "Baremetal GCC for ARM-R and ARM-M processors"
> +LICENSE = "GPL-3.0-with-GCC-exception & GPLv3"
> +
> +LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
> +LIC_FILES_CHKSUM:aarch64 = "file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
> +LIC_FILES_CHKSUM:x86-64 = "file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
> +
> +PROVIDES = "virtual/${BINNAME}-gcc"
> +
> +SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-rm-${HOST_ARCH}"
> +SRC_URI[gnu-rm-aarch64.sha256sum] = "dd861d188f4061a7ef3857c948376f84ef1dfb88a32aded7c336ed7e47e60970"
> +SRC_URI[gnu-rm-x86_64.sha256sum] = "8c5acd5ae567c0100245b0556941c237369f210bceb196edfe5a2e7532c60326"
> +
> +S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
> +
> +UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
> +UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
> --
> 2.30.2
>
--
Regards,
Denys Dmytriyenko <denis@denix.org>
PGP: 0x420902729A92C964 - https://denix.org/0x420902729A92C964
Fingerprint: 25FC E4A5 8A72 2F69 1186 6D76 4209 0272 9A92 C964
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [meta-arm] [RFC] arm-toolchain: upgrade toolchains to 11.2-2002.02
2022-03-22 17:30 ` [meta-arm] " Denys Dmytriyenko
@ 2022-03-22 19:20 ` Jon Mason
2022-03-22 19:27 ` Denys Dmytriyenko
0 siblings, 1 reply; 9+ messages in thread
From: Jon Mason @ 2022-03-22 19:20 UTC (permalink / raw)
To: Denys Dmytriyenko; +Cc: meta-arm, Sumit Garg
After a minor change and using -M25%
diff --git a/ci/get-binary-toolchains b/ci/get-binary-toolchains
index 838342a1c572..394ce4131b9f 100755
--- a/ci/get-binary-toolchains
+++ b/ci/get-binary-toolchains
@@ -2,7 +2,7 @@
set -u
HOST_ARCH=$(uname -m)
-VER="10.3-2021.07"
+VER="11.2-2022.02"
DOWNLOAD_DIR=$1
TOOLCHAIN_DIR=$2
@@ -15,18 +15,21 @@ if [ $HOST_ARCH = "aarch64" ]; then
#AArch64 Linux hosted cross compilers
#AArch32 target with hard float (arm-none-linux-gnueabihf)
- wget -P $DOWNLOAD_DIR -nc
https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
+ wget -P $DOWNLOAD_DIR -nc
https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
+
+ #AArch64 GNU/Linux target (aarch64-none-linux-gnu)
+ wget -P $DOWNLOAD_DIR -nc
https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
elif [ $HOST_ARCH = "x86_64" ]; then
#x86_64 Linux hosted cross compilers
#AArch32 target with hard float (arm-linux-none-gnueabihf)
- wget -P $DOWNLOAD_DIR -nc
https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
+ wget -P $DOWNLOAD_DIR -nc
https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
#AArch64 GNU/Linux target (aarch64-none-linux-gnu)
- wget -P $DOWNLOAD_DIR -nc
https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
+ wget -P $DOWNLOAD_DIR -nc
https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
#AArch64 GNU/Linux target (aarch64_be-none-linux-gnu)
- wget -P $DOWNLOAD_DIR -nc
https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
+ wget -P $DOWNLOAD_DIR -nc
https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
else
echo "ERROR - Unknown build arch of $HOST_ARCH"
exit 1
diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
similarity index 61%
rename from meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
rename to meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
index 02b5b43bdd7e..a9e6b581a50e 100644
--- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
+++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
@@ -9,16 +9,16 @@ SUMMARY = "Baremetal GCC for Aarch64 processors"
LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
-LIC_FILES_CHKSUM:aarch64 =
"file://share/doc/gcc/Copying.html;md5=d06ace534ed0851debcb7140c5b5116e"
-LIC_FILES_CHKSUM:x86-64 =
"file://share/doc/gcc/Copying.html;md5=e4bcb5bee0c4a50c06704b0b73fcbe0c"
+LIC_FILES_CHKSUM:aarch64 =
"file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
+LIC_FILES_CHKSUM:x86-64 =
"file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
-PROVIDES = "virtual/aarch64-none-elf-gcc"
+PROVIDES = "virtual/${BINNAME}-gcc"
-SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-a/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
-SRC_URI[gnu-a-aarch64.sha256sum] =
"768a5db41d93f48838f1c4bfeae26930df2320c09f0dfa798321082fb937955f"
-SRC_URI[gnu-a-x86_64.sha256sum] =
"6f74b1ee370caeb716688d2e467e5b44727fdc0ed56023fe5c72c0620019ecef"
+SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
+SRC_URI[gnu-a-aarch64.sha256sum] =
"3b15725545a0211a17b63e72d4f10241f7ffbe7ce94cb9612590ceacde16992c"
+SRC_URI[gnu-a-x86_64.sha256sum] =
"b0a015a9e8cbb44ed2fe5ad755a7a7ae254d54f93df3bf47378485b0ba8b828b"
S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
-UPSTREAM_CHECK_URI =
"https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-a/downloads"
+UPSTREAM_CHECK_URI =
"https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
similarity index 35%
rename from meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
rename to meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
index ad7e81617d74..930bb5261be8 100644
--- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
+++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
@@ -8,13 +8,17 @@ COMPATIBLE_HOST = "(x86_64|aarch64).*-linux"
SUMMARY = "Baremetal GCC for ARM-R and ARM-M processors"
LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
-LIC_FILES_CHKSUM =
"file://share/doc/gcc-arm-none-eabi/license.txt;md5=c18349634b740b7b95f2c2159af888f5"
+LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
+LIC_FILES_CHKSUM:aarch64 =
"file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
+LIC_FILES_CHKSUM:x86-64 =
"file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
-PROVIDES = "virtual/arm-none-eabi-gcc"
+PROVIDES = "virtual/${BINNAME}-gcc"
-SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-rm/${PV}/${BP}-${HOST_ARCH}-linux.tar.bz2;name=gnu-rm-${HOST_ARCH}"
-SRC_URI[gnu-rm-aarch64.sha256sum] =
"f605b5f23ca898e9b8b665be208510a54a6e9fdd0fa5bfc9592002f6e7431208"
-SRC_URI[gnu-rm-x86_64.sha256sum] =
"97dbb4f019ad1650b732faffcc881689cedc14e2b7ee863d390e0a41ef16c9a3"
+SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-rm-${HOST_ARCH}"
+SRC_URI[gnu-rm-aarch64.sha256sum] =
"dd861d188f4061a7ef3857c948376f84ef1dfb88a32aded7c336ed7e47e60970"
+SRC_URI[gnu-rm-x86_64.sha256sum] =
"8c5acd5ae567c0100245b0556941c237369f210bceb196edfe5a2e7532c60326"
-UPSTREAM_CHECK_URI =
"https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-rm/downloads"
-UPSTREAM_CHECK_REGEX = "${BPN}-(?P<pver>.+)-${HOST_ARCH}-linux\.tar\.\w+"
+S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
+
+UPSTREAM_CHECK_URI =
"https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
+UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
On Tue, Mar 22, 2022 at 1:30 PM Denys Dmytriyenko <denis@denix.org> wrote:
>
> On Tue, Mar 22, 2022 at 09:43:27AM -0400, Jon Mason wrote:
> > There is a new and unified version of the toolchains (no longer the RM
> > and A toolchain split). Update the paths and SHAs to reflect the new
> > location.
> >
> > NOTE: with this change, the binary toolchains do not appear to work
> >
> > Signed-off-by: Jon Mason <jon.mason@arm.com>
> > ---
> > ci/get-binary-toolchains | 13 ++++++----
> > ...b => gcc-aarch64-none-elf_11.2-2022.02.bb} | 14 +++++------
> > .../gcc-arm-none-eabi_10.3-2021.10.bb | 20 ----------------
> > .../gcc-arm-none-eabi_11.2-2022.02.bb | 24 +++++++++++++++++++
> > 4 files changed, 39 insertions(+), 32 deletions(-)
> > rename meta-arm-toolchain/recipes-devtools/external-arm-toolchain/{gcc-aarch64-none-elf_10.3-2021.07.bb => gcc-aarch64-none-elf_11.2-2022.02.bb} (61%)
> > delete mode 100644 meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > create mode 100644 meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
>
> Any chance to lower the similarity threshold to make it a diff for review,
> instead of remove/add?
>
>
> > diff --git a/ci/get-binary-toolchains b/ci/get-binary-toolchains
> > index 838342a1c572..394ce4131b9f 100755
> > --- a/ci/get-binary-toolchains
> > +++ b/ci/get-binary-toolchains
> > @@ -2,7 +2,7 @@
> > set -u
> >
> > HOST_ARCH=$(uname -m)
> > -VER="10.3-2021.07"
> > +VER="11.2-2022.02"
> >
> > DOWNLOAD_DIR=$1
> > TOOLCHAIN_DIR=$2
> > @@ -15,18 +15,21 @@ if [ $HOST_ARCH = "aarch64" ]; then
> > #AArch64 Linux hosted cross compilers
> >
> > #AArch32 target with hard float (arm-none-linux-gnueabihf)
> > - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > +
> > + #AArch64 GNU/Linux target (aarch64-none-linux-gnu)
> > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > elif [ $HOST_ARCH = "x86_64" ]; then
> > #x86_64 Linux hosted cross compilers
> >
> > #AArch32 target with hard float (arm-linux-none-gnueabihf)
> > - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> >
> > #AArch64 GNU/Linux target (aarch64-none-linux-gnu)
> > - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> >
> > #AArch64 GNU/Linux target (aarch64_be-none-linux-gnu)
> > - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
> > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
> > else
> > echo "ERROR - Unknown build arch of $HOST_ARCH"
> > exit 1
> > diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > similarity index 61%
> > rename from meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> > rename to meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > index 02b5b43bdd7e..a9e6b581a50e 100644
> > --- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> > +++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > @@ -9,16 +9,16 @@ SUMMARY = "Baremetal GCC for Aarch64 processors"
> > LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
> >
> > LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
> > -LIC_FILES_CHKSUM:aarch64 = "file://share/doc/gcc/Copying.html;md5=d06ace534ed0851debcb7140c5b5116e"
> > -LIC_FILES_CHKSUM:x86-64 = "file://share/doc/gcc/Copying.html;md5=e4bcb5bee0c4a50c06704b0b73fcbe0c"
> > +LIC_FILES_CHKSUM:aarch64 = "file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
> > +LIC_FILES_CHKSUM:x86-64 = "file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
> >
> > -PROVIDES = "virtual/aarch64-none-elf-gcc"
> > +PROVIDES = "virtual/${BINNAME}-gcc"
> >
> > -SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-a/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
> > -SRC_URI[gnu-a-aarch64.sha256sum] = "768a5db41d93f48838f1c4bfeae26930df2320c09f0dfa798321082fb937955f"
> > -SRC_URI[gnu-a-x86_64.sha256sum] = "6f74b1ee370caeb716688d2e467e5b44727fdc0ed56023fe5c72c0620019ecef"
> > +SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
> > +SRC_URI[gnu-a-aarch64.sha256sum] = "3b15725545a0211a17b63e72d4f10241f7ffbe7ce94cb9612590ceacde16992c"
> > +SRC_URI[gnu-a-x86_64.sha256sum] = "b0a015a9e8cbb44ed2fe5ad755a7a7ae254d54f93df3bf47378485b0ba8b828b"
> >
> > S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
> >
> > -UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-a/downloads"
> > +UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
> > UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
> > diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > deleted file mode 100644
> > index ad7e81617d74..000000000000
> > --- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > +++ /dev/null
> > @@ -1,20 +0,0 @@
> > -# Copyright (C) 2019 Garmin Ltd. or its subsidiaries
> > -# Released under the MIT license (see COPYING.MIT for the terms)
> > -
> > -require arm-binary-toolchain.inc
> > -
> > -COMPATIBLE_HOST = "(x86_64|aarch64).*-linux"
> > -
> > -SUMMARY = "Baremetal GCC for ARM-R and ARM-M processors"
> > -LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
> > -
> > -LIC_FILES_CHKSUM = "file://share/doc/gcc-arm-none-eabi/license.txt;md5=c18349634b740b7b95f2c2159af888f5"
> > -
> > -PROVIDES = "virtual/arm-none-eabi-gcc"
> > -
> > -SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-rm/${PV}/${BP}-${HOST_ARCH}-linux.tar.bz2;name=gnu-rm-${HOST_ARCH}"
> > -SRC_URI[gnu-rm-aarch64.sha256sum] = "f605b5f23ca898e9b8b665be208510a54a6e9fdd0fa5bfc9592002f6e7431208"
> > -SRC_URI[gnu-rm-x86_64.sha256sum] = "97dbb4f019ad1650b732faffcc881689cedc14e2b7ee863d390e0a41ef16c9a3"
> > -
> > -UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-rm/downloads"
> > -UPSTREAM_CHECK_REGEX = "${BPN}-(?P<pver>.+)-${HOST_ARCH}-linux\.tar\.\w+"
> > diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > new file mode 100644
> > index 000000000000..4e9fe35789f9
> > --- /dev/null
> > +++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > @@ -0,0 +1,24 @@
> > +# Copyright (C) 2019 Garmin Ltd. or its subsidiaries
> > +# Released under the MIT license (see COPYING.MIT for the terms)
> > +
> > +require arm-binary-toolchain.inc
> > +
> > +COMPATIBLE_HOST = "(x86_64|aarch64).*-linux"
> > +
> > +SUMMARY = "Baremetal GCC for ARM-R and ARM-M processors"
> > +LICENSE = "GPL-3.0-with-GCC-exception & GPLv3"
> > +
> > +LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
> > +LIC_FILES_CHKSUM:aarch64 = "file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
> > +LIC_FILES_CHKSUM:x86-64 = "file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
> > +
> > +PROVIDES = "virtual/${BINNAME}-gcc"
> > +
> > +SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-rm-${HOST_ARCH}"
> > +SRC_URI[gnu-rm-aarch64.sha256sum] = "dd861d188f4061a7ef3857c948376f84ef1dfb88a32aded7c336ed7e47e60970"
> > +SRC_URI[gnu-rm-x86_64.sha256sum] = "8c5acd5ae567c0100245b0556941c237369f210bceb196edfe5a2e7532c60326"
> > +
> > +S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
> > +
> > +UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
> > +UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
> > --
> > 2.30.2
> >
>
> --
> Regards,
> Denys Dmytriyenko <denis@denix.org>
> PGP: 0x420902729A92C964 - https://denix.org/0x420902729A92C964
> Fingerprint: 25FC E4A5 8A72 2F69 1186 6D76 4209 0272 9A92 C964
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [meta-arm] [RFC] arm-toolchain: upgrade toolchains to 11.2-2002.02
2022-03-22 19:20 ` Jon Mason
@ 2022-03-22 19:27 ` Denys Dmytriyenko
2022-03-22 21:08 ` Jon Mason
0 siblings, 1 reply; 9+ messages in thread
From: Denys Dmytriyenko @ 2022-03-22 19:27 UTC (permalink / raw)
To: Jon Mason; +Cc: meta-arm, Sumit Garg
On Tue, Mar 22, 2022 at 03:20:37PM -0400, Jon Mason wrote:
> After a minor change and using -M25%
Thanks! The patch is obviously malformed as it was sent as a reply, but
otherwise looks good to me.
Feel free to add to the real patch:
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
> diff --git a/ci/get-binary-toolchains b/ci/get-binary-toolchains
> index 838342a1c572..394ce4131b9f 100755
> --- a/ci/get-binary-toolchains
> +++ b/ci/get-binary-toolchains
> @@ -2,7 +2,7 @@
> set -u
>
> HOST_ARCH=$(uname -m)
> -VER="10.3-2021.07"
> +VER="11.2-2022.02"
>
> DOWNLOAD_DIR=$1
> TOOLCHAIN_DIR=$2
> @@ -15,18 +15,21 @@ if [ $HOST_ARCH = "aarch64" ]; then
> #AArch64 Linux hosted cross compilers
>
> #AArch32 target with hard float (arm-none-linux-gnueabihf)
> - wget -P $DOWNLOAD_DIR -nc
> https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> + wget -P $DOWNLOAD_DIR -nc
> https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> +
> + #AArch64 GNU/Linux target (aarch64-none-linux-gnu)
> + wget -P $DOWNLOAD_DIR -nc
> https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> elif [ $HOST_ARCH = "x86_64" ]; then
> #x86_64 Linux hosted cross compilers
>
> #AArch32 target with hard float (arm-linux-none-gnueabihf)
> - wget -P $DOWNLOAD_DIR -nc
> https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> + wget -P $DOWNLOAD_DIR -nc
> https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
>
> #AArch64 GNU/Linux target (aarch64-none-linux-gnu)
> - wget -P $DOWNLOAD_DIR -nc
> https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> + wget -P $DOWNLOAD_DIR -nc
> https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
>
> #AArch64 GNU/Linux target (aarch64_be-none-linux-gnu)
> - wget -P $DOWNLOAD_DIR -nc
> https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
> + wget -P $DOWNLOAD_DIR -nc
> https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
> else
> echo "ERROR - Unknown build arch of $HOST_ARCH"
> exit 1
> diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> similarity index 61%
> rename from meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> rename to meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> index 02b5b43bdd7e..a9e6b581a50e 100644
> --- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> +++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> @@ -9,16 +9,16 @@ SUMMARY = "Baremetal GCC for Aarch64 processors"
> LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
>
> LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
> -LIC_FILES_CHKSUM:aarch64 =
> "file://share/doc/gcc/Copying.html;md5=d06ace534ed0851debcb7140c5b5116e"
> -LIC_FILES_CHKSUM:x86-64 =
> "file://share/doc/gcc/Copying.html;md5=e4bcb5bee0c4a50c06704b0b73fcbe0c"
> +LIC_FILES_CHKSUM:aarch64 =
> "file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
> +LIC_FILES_CHKSUM:x86-64 =
> "file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
>
> -PROVIDES = "virtual/aarch64-none-elf-gcc"
> +PROVIDES = "virtual/${BINNAME}-gcc"
>
> -SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-a/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
> -SRC_URI[gnu-a-aarch64.sha256sum] =
> "768a5db41d93f48838f1c4bfeae26930df2320c09f0dfa798321082fb937955f"
> -SRC_URI[gnu-a-x86_64.sha256sum] =
> "6f74b1ee370caeb716688d2e467e5b44727fdc0ed56023fe5c72c0620019ecef"
> +SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
> +SRC_URI[gnu-a-aarch64.sha256sum] =
> "3b15725545a0211a17b63e72d4f10241f7ffbe7ce94cb9612590ceacde16992c"
> +SRC_URI[gnu-a-x86_64.sha256sum] =
> "b0a015a9e8cbb44ed2fe5ad755a7a7ae254d54f93df3bf47378485b0ba8b828b"
>
> S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
>
> -UPSTREAM_CHECK_URI =
> "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-a/downloads"
> +UPSTREAM_CHECK_URI =
> "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
> UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
> diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> similarity index 35%
> rename from meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> rename to meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> index ad7e81617d74..930bb5261be8 100644
> --- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> +++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> @@ -8,13 +8,17 @@ COMPATIBLE_HOST = "(x86_64|aarch64).*-linux"
> SUMMARY = "Baremetal GCC for ARM-R and ARM-M processors"
> LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
>
> -LIC_FILES_CHKSUM =
> "file://share/doc/gcc-arm-none-eabi/license.txt;md5=c18349634b740b7b95f2c2159af888f5"
> +LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
> +LIC_FILES_CHKSUM:aarch64 =
> "file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
> +LIC_FILES_CHKSUM:x86-64 =
> "file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
>
> -PROVIDES = "virtual/arm-none-eabi-gcc"
> +PROVIDES = "virtual/${BINNAME}-gcc"
>
> -SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-rm/${PV}/${BP}-${HOST_ARCH}-linux.tar.bz2;name=gnu-rm-${HOST_ARCH}"
> -SRC_URI[gnu-rm-aarch64.sha256sum] =
> "f605b5f23ca898e9b8b665be208510a54a6e9fdd0fa5bfc9592002f6e7431208"
> -SRC_URI[gnu-rm-x86_64.sha256sum] =
> "97dbb4f019ad1650b732faffcc881689cedc14e2b7ee863d390e0a41ef16c9a3"
> +SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-rm-${HOST_ARCH}"
> +SRC_URI[gnu-rm-aarch64.sha256sum] =
> "dd861d188f4061a7ef3857c948376f84ef1dfb88a32aded7c336ed7e47e60970"
> +SRC_URI[gnu-rm-x86_64.sha256sum] =
> "8c5acd5ae567c0100245b0556941c237369f210bceb196edfe5a2e7532c60326"
>
> -UPSTREAM_CHECK_URI =
> "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-rm/downloads"
> -UPSTREAM_CHECK_REGEX = "${BPN}-(?P<pver>.+)-${HOST_ARCH}-linux\.tar\.\w+"
> +S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
> +
> +UPSTREAM_CHECK_URI =
> "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
> +UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
>
>
>
>
>
>
>
>
>
>
>
>
>
> On Tue, Mar 22, 2022 at 1:30 PM Denys Dmytriyenko <denis@denix.org> wrote:
> >
> > On Tue, Mar 22, 2022 at 09:43:27AM -0400, Jon Mason wrote:
> > > There is a new and unified version of the toolchains (no longer the RM
> > > and A toolchain split). Update the paths and SHAs to reflect the new
> > > location.
> > >
> > > NOTE: with this change, the binary toolchains do not appear to work
> > >
> > > Signed-off-by: Jon Mason <jon.mason@arm.com>
> > > ---
> > > ci/get-binary-toolchains | 13 ++++++----
> > > ...b => gcc-aarch64-none-elf_11.2-2022.02.bb} | 14 +++++------
> > > .../gcc-arm-none-eabi_10.3-2021.10.bb | 20 ----------------
> > > .../gcc-arm-none-eabi_11.2-2022.02.bb | 24 +++++++++++++++++++
> > > 4 files changed, 39 insertions(+), 32 deletions(-)
> > > rename meta-arm-toolchain/recipes-devtools/external-arm-toolchain/{gcc-aarch64-none-elf_10.3-2021.07.bb => gcc-aarch64-none-elf_11.2-2022.02.bb} (61%)
> > > delete mode 100644 meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > > create mode 100644 meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> >
> > Any chance to lower the similarity threshold to make it a diff for review,
> > instead of remove/add?
> >
> >
> > > diff --git a/ci/get-binary-toolchains b/ci/get-binary-toolchains
> > > index 838342a1c572..394ce4131b9f 100755
> > > --- a/ci/get-binary-toolchains
> > > +++ b/ci/get-binary-toolchains
> > > @@ -2,7 +2,7 @@
> > > set -u
> > >
> > > HOST_ARCH=$(uname -m)
> > > -VER="10.3-2021.07"
> > > +VER="11.2-2022.02"
> > >
> > > DOWNLOAD_DIR=$1
> > > TOOLCHAIN_DIR=$2
> > > @@ -15,18 +15,21 @@ if [ $HOST_ARCH = "aarch64" ]; then
> > > #AArch64 Linux hosted cross compilers
> > >
> > > #AArch32 target with hard float (arm-none-linux-gnueabihf)
> > > - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > +
> > > + #AArch64 GNU/Linux target (aarch64-none-linux-gnu)
> > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > > elif [ $HOST_ARCH = "x86_64" ]; then
> > > #x86_64 Linux hosted cross compilers
> > >
> > > #AArch32 target with hard float (arm-linux-none-gnueabihf)
> > > - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > >
> > > #AArch64 GNU/Linux target (aarch64-none-linux-gnu)
> > > - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > >
> > > #AArch64 GNU/Linux target (aarch64_be-none-linux-gnu)
> > > - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
> > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
> > > else
> > > echo "ERROR - Unknown build arch of $HOST_ARCH"
> > > exit 1
> > > diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > > similarity index 61%
> > > rename from meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> > > rename to meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > > index 02b5b43bdd7e..a9e6b581a50e 100644
> > > --- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> > > +++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > > @@ -9,16 +9,16 @@ SUMMARY = "Baremetal GCC for Aarch64 processors"
> > > LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
> > >
> > > LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
> > > -LIC_FILES_CHKSUM:aarch64 = "file://share/doc/gcc/Copying.html;md5=d06ace534ed0851debcb7140c5b5116e"
> > > -LIC_FILES_CHKSUM:x86-64 = "file://share/doc/gcc/Copying.html;md5=e4bcb5bee0c4a50c06704b0b73fcbe0c"
> > > +LIC_FILES_CHKSUM:aarch64 = "file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
> > > +LIC_FILES_CHKSUM:x86-64 = "file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
> > >
> > > -PROVIDES = "virtual/aarch64-none-elf-gcc"
> > > +PROVIDES = "virtual/${BINNAME}-gcc"
> > >
> > > -SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-a/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
> > > -SRC_URI[gnu-a-aarch64.sha256sum] = "768a5db41d93f48838f1c4bfeae26930df2320c09f0dfa798321082fb937955f"
> > > -SRC_URI[gnu-a-x86_64.sha256sum] = "6f74b1ee370caeb716688d2e467e5b44727fdc0ed56023fe5c72c0620019ecef"
> > > +SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
> > > +SRC_URI[gnu-a-aarch64.sha256sum] = "3b15725545a0211a17b63e72d4f10241f7ffbe7ce94cb9612590ceacde16992c"
> > > +SRC_URI[gnu-a-x86_64.sha256sum] = "b0a015a9e8cbb44ed2fe5ad755a7a7ae254d54f93df3bf47378485b0ba8b828b"
> > >
> > > S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
> > >
> > > -UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-a/downloads"
> > > +UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
> > > UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
> > > diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > > deleted file mode 100644
> > > index ad7e81617d74..000000000000
> > > --- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > > +++ /dev/null
> > > @@ -1,20 +0,0 @@
> > > -# Copyright (C) 2019 Garmin Ltd. or its subsidiaries
> > > -# Released under the MIT license (see COPYING.MIT for the terms)
> > > -
> > > -require arm-binary-toolchain.inc
> > > -
> > > -COMPATIBLE_HOST = "(x86_64|aarch64).*-linux"
> > > -
> > > -SUMMARY = "Baremetal GCC for ARM-R and ARM-M processors"
> > > -LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
> > > -
> > > -LIC_FILES_CHKSUM = "file://share/doc/gcc-arm-none-eabi/license.txt;md5=c18349634b740b7b95f2c2159af888f5"
> > > -
> > > -PROVIDES = "virtual/arm-none-eabi-gcc"
> > > -
> > > -SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-rm/${PV}/${BP}-${HOST_ARCH}-linux.tar.bz2;name=gnu-rm-${HOST_ARCH}"
> > > -SRC_URI[gnu-rm-aarch64.sha256sum] = "f605b5f23ca898e9b8b665be208510a54a6e9fdd0fa5bfc9592002f6e7431208"
> > > -SRC_URI[gnu-rm-x86_64.sha256sum] = "97dbb4f019ad1650b732faffcc881689cedc14e2b7ee863d390e0a41ef16c9a3"
> > > -
> > > -UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-rm/downloads"
> > > -UPSTREAM_CHECK_REGEX = "${BPN}-(?P<pver>.+)-${HOST_ARCH}-linux\.tar\.\w+"
> > > diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > > new file mode 100644
> > > index 000000000000..4e9fe35789f9
> > > --- /dev/null
> > > +++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > > @@ -0,0 +1,24 @@
> > > +# Copyright (C) 2019 Garmin Ltd. or its subsidiaries
> > > +# Released under the MIT license (see COPYING.MIT for the terms)
> > > +
> > > +require arm-binary-toolchain.inc
> > > +
> > > +COMPATIBLE_HOST = "(x86_64|aarch64).*-linux"
> > > +
> > > +SUMMARY = "Baremetal GCC for ARM-R and ARM-M processors"
> > > +LICENSE = "GPL-3.0-with-GCC-exception & GPLv3"
> > > +
> > > +LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
> > > +LIC_FILES_CHKSUM:aarch64 = "file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
> > > +LIC_FILES_CHKSUM:x86-64 = "file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
> > > +
> > > +PROVIDES = "virtual/${BINNAME}-gcc"
> > > +
> > > +SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-rm-${HOST_ARCH}"
> > > +SRC_URI[gnu-rm-aarch64.sha256sum] = "dd861d188f4061a7ef3857c948376f84ef1dfb88a32aded7c336ed7e47e60970"
> > > +SRC_URI[gnu-rm-x86_64.sha256sum] = "8c5acd5ae567c0100245b0556941c237369f210bceb196edfe5a2e7532c60326"
> > > +
> > > +S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
> > > +
> > > +UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
> > > +UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
> > > --
> > > 2.30.2
> > >
> >
> > --
> > Regards,
> > Denys Dmytriyenko <denis@denix.org>
> > PGP: 0x420902729A92C964 - https://denix.org/0x420902729A92C964
> > Fingerprint: 25FC E4A5 8A72 2F69 1186 6D76 4209 0272 9A92 C964
>
--
Regards,
Denys Dmytriyenko <denis@denix.org>
PGP: 0x420902729A92C964 - https://denix.org/0x420902729A92C964
Fingerprint: 25FC E4A5 8A72 2F69 1186 6D76 4209 0272 9A92 C964
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [meta-arm] [RFC] arm-toolchain: upgrade toolchains to 11.2-2002.02
2022-03-22 19:27 ` Denys Dmytriyenko
@ 2022-03-22 21:08 ` Jon Mason
2022-03-30 20:15 ` Denys Dmytriyenko
0 siblings, 1 reply; 9+ messages in thread
From: Jon Mason @ 2022-03-22 21:08 UTC (permalink / raw)
To: Denys Dmytriyenko; +Cc: meta-arm, Sumit Garg
On Tue, Mar 22, 2022 at 3:27 PM Denys Dmytriyenko <denis@denix.org> wrote:
>
> On Tue, Mar 22, 2022 at 03:20:37PM -0400, Jon Mason wrote:
> > After a minor change and using -M25%
>
> Thanks! The patch is obviously malformed as it was sent as a reply, but
> otherwise looks good to me.
>
> Feel free to add to the real patch:
>
> Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
If only this one worked. I'm still seeing the error with do_install
https://gitlab.com/jonmason00/meta-arm/-/jobs/2236954115
And no actual error in the log, and I'm not sure where to begin
debugging it without an error in the log. You can pull the code down
from my gitlab
https://gitlab.com/jonmason00/meta-arm/
branch dev3
I would really appreciate your reviewed-by for the other patch (as I
can actually confirm it works in our CI, and I'd like to get it in
before the code freeze at the end of the month).
https://lists.yoctoproject.org/g/meta-arm/message/3191
Thanks,
Jon
> > diff --git a/ci/get-binary-toolchains b/ci/get-binary-toolchains
> > index 838342a1c572..394ce4131b9f 100755
> > --- a/ci/get-binary-toolchains
> > +++ b/ci/get-binary-toolchains
> > @@ -2,7 +2,7 @@
> > set -u
> >
> > HOST_ARCH=$(uname -m)
> > -VER="10.3-2021.07"
> > +VER="11.2-2022.02"
> >
> > DOWNLOAD_DIR=$1
> > TOOLCHAIN_DIR=$2
> > @@ -15,18 +15,21 @@ if [ $HOST_ARCH = "aarch64" ]; then
> > #AArch64 Linux hosted cross compilers
> >
> > #AArch32 target with hard float (arm-none-linux-gnueabihf)
> > - wget -P $DOWNLOAD_DIR -nc
> > https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > + wget -P $DOWNLOAD_DIR -nc
> > https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > +
> > + #AArch64 GNU/Linux target (aarch64-none-linux-gnu)
> > + wget -P $DOWNLOAD_DIR -nc
> > https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > elif [ $HOST_ARCH = "x86_64" ]; then
> > #x86_64 Linux hosted cross compilers
> >
> > #AArch32 target with hard float (arm-linux-none-gnueabihf)
> > - wget -P $DOWNLOAD_DIR -nc
> > https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > + wget -P $DOWNLOAD_DIR -nc
> > https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> >
> > #AArch64 GNU/Linux target (aarch64-none-linux-gnu)
> > - wget -P $DOWNLOAD_DIR -nc
> > https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > + wget -P $DOWNLOAD_DIR -nc
> > https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> >
> > #AArch64 GNU/Linux target (aarch64_be-none-linux-gnu)
> > - wget -P $DOWNLOAD_DIR -nc
> > https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
> > + wget -P $DOWNLOAD_DIR -nc
> > https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
> > else
> > echo "ERROR - Unknown build arch of $HOST_ARCH"
> > exit 1
> > diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> > b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > similarity index 61%
> > rename from meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> > rename to meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > index 02b5b43bdd7e..a9e6b581a50e 100644
> > --- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> > +++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > @@ -9,16 +9,16 @@ SUMMARY = "Baremetal GCC for Aarch64 processors"
> > LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
> >
> > LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
> > -LIC_FILES_CHKSUM:aarch64 =
> > "file://share/doc/gcc/Copying.html;md5=d06ace534ed0851debcb7140c5b5116e"
> > -LIC_FILES_CHKSUM:x86-64 =
> > "file://share/doc/gcc/Copying.html;md5=e4bcb5bee0c4a50c06704b0b73fcbe0c"
> > +LIC_FILES_CHKSUM:aarch64 =
> > "file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
> > +LIC_FILES_CHKSUM:x86-64 =
> > "file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
> >
> > -PROVIDES = "virtual/aarch64-none-elf-gcc"
> > +PROVIDES = "virtual/${BINNAME}-gcc"
> >
> > -SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-a/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
> > -SRC_URI[gnu-a-aarch64.sha256sum] =
> > "768a5db41d93f48838f1c4bfeae26930df2320c09f0dfa798321082fb937955f"
> > -SRC_URI[gnu-a-x86_64.sha256sum] =
> > "6f74b1ee370caeb716688d2e467e5b44727fdc0ed56023fe5c72c0620019ecef"
> > +SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
> > +SRC_URI[gnu-a-aarch64.sha256sum] =
> > "3b15725545a0211a17b63e72d4f10241f7ffbe7ce94cb9612590ceacde16992c"
> > +SRC_URI[gnu-a-x86_64.sha256sum] =
> > "b0a015a9e8cbb44ed2fe5ad755a7a7ae254d54f93df3bf47378485b0ba8b828b"
> >
> > S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
> >
> > -UPSTREAM_CHECK_URI =
> > "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-a/downloads"
> > +UPSTREAM_CHECK_URI =
> > "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
> > UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
> > diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > similarity index 35%
> > rename from meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > rename to meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > index ad7e81617d74..930bb5261be8 100644
> > --- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > +++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > @@ -8,13 +8,17 @@ COMPATIBLE_HOST = "(x86_64|aarch64).*-linux"
> > SUMMARY = "Baremetal GCC for ARM-R and ARM-M processors"
> > LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
> >
> > -LIC_FILES_CHKSUM =
> > "file://share/doc/gcc-arm-none-eabi/license.txt;md5=c18349634b740b7b95f2c2159af888f5"
> > +LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
> > +LIC_FILES_CHKSUM:aarch64 =
> > "file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
> > +LIC_FILES_CHKSUM:x86-64 =
> > "file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
> >
> > -PROVIDES = "virtual/arm-none-eabi-gcc"
> > +PROVIDES = "virtual/${BINNAME}-gcc"
> >
> > -SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-rm/${PV}/${BP}-${HOST_ARCH}-linux.tar.bz2;name=gnu-rm-${HOST_ARCH}"
> > -SRC_URI[gnu-rm-aarch64.sha256sum] =
> > "f605b5f23ca898e9b8b665be208510a54a6e9fdd0fa5bfc9592002f6e7431208"
> > -SRC_URI[gnu-rm-x86_64.sha256sum] =
> > "97dbb4f019ad1650b732faffcc881689cedc14e2b7ee863d390e0a41ef16c9a3"
> > +SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-rm-${HOST_ARCH}"
> > +SRC_URI[gnu-rm-aarch64.sha256sum] =
> > "dd861d188f4061a7ef3857c948376f84ef1dfb88a32aded7c336ed7e47e60970"
> > +SRC_URI[gnu-rm-x86_64.sha256sum] =
> > "8c5acd5ae567c0100245b0556941c237369f210bceb196edfe5a2e7532c60326"
> >
> > -UPSTREAM_CHECK_URI =
> > "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-rm/downloads"
> > -UPSTREAM_CHECK_REGEX = "${BPN}-(?P<pver>.+)-${HOST_ARCH}-linux\.tar\.\w+"
> > +S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
> > +
> > +UPSTREAM_CHECK_URI =
> > "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
> > +UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > On Tue, Mar 22, 2022 at 1:30 PM Denys Dmytriyenko <denis@denix.org> wrote:
> > >
> > > On Tue, Mar 22, 2022 at 09:43:27AM -0400, Jon Mason wrote:
> > > > There is a new and unified version of the toolchains (no longer the RM
> > > > and A toolchain split). Update the paths and SHAs to reflect the new
> > > > location.
> > > >
> > > > NOTE: with this change, the binary toolchains do not appear to work
> > > >
> > > > Signed-off-by: Jon Mason <jon.mason@arm.com>
> > > > ---
> > > > ci/get-binary-toolchains | 13 ++++++----
> > > > ...b => gcc-aarch64-none-elf_11.2-2022.02.bb} | 14 +++++------
> > > > .../gcc-arm-none-eabi_10.3-2021.10.bb | 20 ----------------
> > > > .../gcc-arm-none-eabi_11.2-2022.02.bb | 24 +++++++++++++++++++
> > > > 4 files changed, 39 insertions(+), 32 deletions(-)
> > > > rename meta-arm-toolchain/recipes-devtools/external-arm-toolchain/{gcc-aarch64-none-elf_10.3-2021.07.bb => gcc-aarch64-none-elf_11.2-2022.02.bb} (61%)
> > > > delete mode 100644 meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > > > create mode 100644 meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > >
> > > Any chance to lower the similarity threshold to make it a diff for review,
> > > instead of remove/add?
> > >
> > >
> > > > diff --git a/ci/get-binary-toolchains b/ci/get-binary-toolchains
> > > > index 838342a1c572..394ce4131b9f 100755
> > > > --- a/ci/get-binary-toolchains
> > > > +++ b/ci/get-binary-toolchains
> > > > @@ -2,7 +2,7 @@
> > > > set -u
> > > >
> > > > HOST_ARCH=$(uname -m)
> > > > -VER="10.3-2021.07"
> > > > +VER="11.2-2022.02"
> > > >
> > > > DOWNLOAD_DIR=$1
> > > > TOOLCHAIN_DIR=$2
> > > > @@ -15,18 +15,21 @@ if [ $HOST_ARCH = "aarch64" ]; then
> > > > #AArch64 Linux hosted cross compilers
> > > >
> > > > #AArch32 target with hard float (arm-none-linux-gnueabihf)
> > > > - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > > +
> > > > + #AArch64 GNU/Linux target (aarch64-none-linux-gnu)
> > > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > > > elif [ $HOST_ARCH = "x86_64" ]; then
> > > > #x86_64 Linux hosted cross compilers
> > > >
> > > > #AArch32 target with hard float (arm-linux-none-gnueabihf)
> > > > - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > >
> > > > #AArch64 GNU/Linux target (aarch64-none-linux-gnu)
> > > > - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > > >
> > > > #AArch64 GNU/Linux target (aarch64_be-none-linux-gnu)
> > > > - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
> > > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
> > > > else
> > > > echo "ERROR - Unknown build arch of $HOST_ARCH"
> > > > exit 1
> > > > diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > > > similarity index 61%
> > > > rename from meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> > > > rename to meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > > > index 02b5b43bdd7e..a9e6b581a50e 100644
> > > > --- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> > > > +++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > > > @@ -9,16 +9,16 @@ SUMMARY = "Baremetal GCC for Aarch64 processors"
> > > > LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
> > > >
> > > > LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
> > > > -LIC_FILES_CHKSUM:aarch64 = "file://share/doc/gcc/Copying.html;md5=d06ace534ed0851debcb7140c5b5116e"
> > > > -LIC_FILES_CHKSUM:x86-64 = "file://share/doc/gcc/Copying.html;md5=e4bcb5bee0c4a50c06704b0b73fcbe0c"
> > > > +LIC_FILES_CHKSUM:aarch64 = "file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
> > > > +LIC_FILES_CHKSUM:x86-64 = "file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
> > > >
> > > > -PROVIDES = "virtual/aarch64-none-elf-gcc"
> > > > +PROVIDES = "virtual/${BINNAME}-gcc"
> > > >
> > > > -SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-a/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
> > > > -SRC_URI[gnu-a-aarch64.sha256sum] = "768a5db41d93f48838f1c4bfeae26930df2320c09f0dfa798321082fb937955f"
> > > > -SRC_URI[gnu-a-x86_64.sha256sum] = "6f74b1ee370caeb716688d2e467e5b44727fdc0ed56023fe5c72c0620019ecef"
> > > > +SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
> > > > +SRC_URI[gnu-a-aarch64.sha256sum] = "3b15725545a0211a17b63e72d4f10241f7ffbe7ce94cb9612590ceacde16992c"
> > > > +SRC_URI[gnu-a-x86_64.sha256sum] = "b0a015a9e8cbb44ed2fe5ad755a7a7ae254d54f93df3bf47378485b0ba8b828b"
> > > >
> > > > S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
> > > >
> > > > -UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-a/downloads"
> > > > +UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
> > > > UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
> > > > diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > > > deleted file mode 100644
> > > > index ad7e81617d74..000000000000
> > > > --- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > > > +++ /dev/null
> > > > @@ -1,20 +0,0 @@
> > > > -# Copyright (C) 2019 Garmin Ltd. or its subsidiaries
> > > > -# Released under the MIT license (see COPYING.MIT for the terms)
> > > > -
> > > > -require arm-binary-toolchain.inc
> > > > -
> > > > -COMPATIBLE_HOST = "(x86_64|aarch64).*-linux"
> > > > -
> > > > -SUMMARY = "Baremetal GCC for ARM-R and ARM-M processors"
> > > > -LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
> > > > -
> > > > -LIC_FILES_CHKSUM = "file://share/doc/gcc-arm-none-eabi/license.txt;md5=c18349634b740b7b95f2c2159af888f5"
> > > > -
> > > > -PROVIDES = "virtual/arm-none-eabi-gcc"
> > > > -
> > > > -SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-rm/${PV}/${BP}-${HOST_ARCH}-linux.tar.bz2;name=gnu-rm-${HOST_ARCH}"
> > > > -SRC_URI[gnu-rm-aarch64.sha256sum] = "f605b5f23ca898e9b8b665be208510a54a6e9fdd0fa5bfc9592002f6e7431208"
> > > > -SRC_URI[gnu-rm-x86_64.sha256sum] = "97dbb4f019ad1650b732faffcc881689cedc14e2b7ee863d390e0a41ef16c9a3"
> > > > -
> > > > -UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-rm/downloads"
> > > > -UPSTREAM_CHECK_REGEX = "${BPN}-(?P<pver>.+)-${HOST_ARCH}-linux\.tar\.\w+"
> > > > diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > > > new file mode 100644
> > > > index 000000000000..4e9fe35789f9
> > > > --- /dev/null
> > > > +++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > > > @@ -0,0 +1,24 @@
> > > > +# Copyright (C) 2019 Garmin Ltd. or its subsidiaries
> > > > +# Released under the MIT license (see COPYING.MIT for the terms)
> > > > +
> > > > +require arm-binary-toolchain.inc
> > > > +
> > > > +COMPATIBLE_HOST = "(x86_64|aarch64).*-linux"
> > > > +
> > > > +SUMMARY = "Baremetal GCC for ARM-R and ARM-M processors"
> > > > +LICENSE = "GPL-3.0-with-GCC-exception & GPLv3"
> > > > +
> > > > +LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
> > > > +LIC_FILES_CHKSUM:aarch64 = "file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
> > > > +LIC_FILES_CHKSUM:x86-64 = "file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
> > > > +
> > > > +PROVIDES = "virtual/${BINNAME}-gcc"
> > > > +
> > > > +SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-rm-${HOST_ARCH}"
> > > > +SRC_URI[gnu-rm-aarch64.sha256sum] = "dd861d188f4061a7ef3857c948376f84ef1dfb88a32aded7c336ed7e47e60970"
> > > > +SRC_URI[gnu-rm-x86_64.sha256sum] = "8c5acd5ae567c0100245b0556941c237369f210bceb196edfe5a2e7532c60326"
> > > > +
> > > > +S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
> > > > +
> > > > +UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
> > > > +UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
> > > > --
> > > > 2.30.2
> > > >
> > >
> > > --
> > > Regards,
> > > Denys Dmytriyenko <denis@denix.org>
> > > PGP: 0x420902729A92C964 - https://denix.org/0x420902729A92C964
> > > Fingerprint: 25FC E4A5 8A72 2F69 1186 6D76 4209 0272 9A92 C964
> >
>
> --
> Regards,
> Denys Dmytriyenko <denis@denix.org>
> PGP: 0x420902729A92C964 - https://denix.org/0x420902729A92C964
> Fingerprint: 25FC E4A5 8A72 2F69 1186 6D76 4209 0272 9A92 C964
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [meta-arm] [RFC] arm-toolchain: upgrade toolchains to 11.2-2002.02
2022-03-22 21:08 ` Jon Mason
@ 2022-03-30 20:15 ` Denys Dmytriyenko
2022-04-04 13:44 ` Sumit Garg
0 siblings, 1 reply; 9+ messages in thread
From: Denys Dmytriyenko @ 2022-03-30 20:15 UTC (permalink / raw)
To: Jon Mason; +Cc: meta-arm, Sumit Garg
On Tue, Mar 22, 2022 at 05:08:41PM -0400, Jon Mason wrote:
> On Tue, Mar 22, 2022 at 3:27 PM Denys Dmytriyenko <denis@denix.org> wrote:
> >
> > On Tue, Mar 22, 2022 at 03:20:37PM -0400, Jon Mason wrote:
> > > After a minor change and using -M25%
> >
> > Thanks! The patch is obviously malformed as it was sent as a reply, but
> > otherwise looks good to me.
> >
> > Feel free to add to the real patch:
> >
> > Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
I have to retract my Reviewed-by, as the patch seems incorrect.
> If only this one worked. I'm still seeing the error with do_install
> https://gitlab.com/jonmason00/meta-arm/-/jobs/2236954115
>
> And no actual error in the log, and I'm not sure where to begin
> debugging it without an error in the log. You can pull the code down
> from my gitlab
> https://gitlab.com/jonmason00/meta-arm/
> branch dev3
>
> I would really appreciate your reviewed-by for the other patch (as I
> can actually confirm it works in our CI, and I'd like to get it in
> before the code freeze at the end of the month).
> https://lists.yoctoproject.org/g/meta-arm/message/3191
Here's the thing - you are updating baremetal toolchain recipes, which
download their release tarballs on their own and not by CI.
You are also changing CI part that downloads Linux toolchain used by
external-toolchain, not by baremetal toolchains.
So, you are feeding newer 11.2 Linux toolchain release to external-toolchain
recipe that might need updating also due to subtle changes in their release
structure.
There are 3 different types of toolchains in meta-arm-toolchain:
1. ARM Linux toolchain built from sources, then used to build the rest of the
Linux system - recipes-devtool/gcc
2. ARM Linux toolchain using prebuilt binaries, expects those binaries to
exist on the host (downloaded by CI) and the recipe then scrapes required
pieces into sysroot, which then used to build the rest of the Linux system -
recipes-devtools/external-arm-toolchain/external-arm-toolchain.bb
3. ARM baremetal toolchains used to build firmware and non-Linux components,
recipes are self-contained and download their binaries on their own -
recipes-devtools/external-arm-toolchain/gcc-$arch-none-{elf/eabi}_*.bb
All 3 are independent of each other and have no re-use between them, as they
are different. And thus can have different versions. #1 and #2 are mutually
exclusive, as that's your main Linux toolchain. #3 can co-exist with either
one of those two as it's for baremetal components.
So, Sumit's first patch updated #1 - source Linux toolchain. His second patch
tried to update CI for #2 - external prebuilt Linux toolchain. That's where
the error is coming from.
You then re-spinned the patch and besides updating CI for #2 toolchain, also
bumped up #3 baremetal toolchains. The error is still there though and is in
external prebuilt Linux toolchain (#2), not in baremetal toolchains (#3).
As I said earlier, it seems external-arm-toolchain also needs some adjustments
for 11.2 besides pulling new tarballs in CI.
I might be able to find some time and look into fixing external-arm-toolchain
to work with 11.2 prebuilt binary release in the next couple days. Worst case
scenario - split your patch and only merge baremetal update, leaving CI at
10.3 for now for external-arm-toolchain...
PS. it appears Patchwork is missing some patches, specifically both Sumit's
first version to update #1, as well as your second re-spin for the same.
Wonder if it's due to the patch size...
--
Denys
> > > diff --git a/ci/get-binary-toolchains b/ci/get-binary-toolchains
> > > index 838342a1c572..394ce4131b9f 100755
> > > --- a/ci/get-binary-toolchains
> > > +++ b/ci/get-binary-toolchains
> > > @@ -2,7 +2,7 @@
> > > set -u
> > >
> > > HOST_ARCH=$(uname -m)
> > > -VER="10.3-2021.07"
> > > +VER="11.2-2022.02"
> > >
> > > DOWNLOAD_DIR=$1
> > > TOOLCHAIN_DIR=$2
> > > @@ -15,18 +15,21 @@ if [ $HOST_ARCH = "aarch64" ]; then
> > > #AArch64 Linux hosted cross compilers
> > >
> > > #AArch32 target with hard float (arm-none-linux-gnueabihf)
> > > - wget -P $DOWNLOAD_DIR -nc
> > > https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > + wget -P $DOWNLOAD_DIR -nc
> > > https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > +
> > > + #AArch64 GNU/Linux target (aarch64-none-linux-gnu)
> > > + wget -P $DOWNLOAD_DIR -nc
> > > https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > > elif [ $HOST_ARCH = "x86_64" ]; then
> > > #x86_64 Linux hosted cross compilers
> > >
> > > #AArch32 target with hard float (arm-linux-none-gnueabihf)
> > > - wget -P $DOWNLOAD_DIR -nc
> > > https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > + wget -P $DOWNLOAD_DIR -nc
> > > https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > >
> > > #AArch64 GNU/Linux target (aarch64-none-linux-gnu)
> > > - wget -P $DOWNLOAD_DIR -nc
> > > https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > > + wget -P $DOWNLOAD_DIR -nc
> > > https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > >
> > > #AArch64 GNU/Linux target (aarch64_be-none-linux-gnu)
> > > - wget -P $DOWNLOAD_DIR -nc
> > > https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
> > > + wget -P $DOWNLOAD_DIR -nc
> > > https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
> > > else
> > > echo "ERROR - Unknown build arch of $HOST_ARCH"
> > > exit 1
> > > diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> > > b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > > similarity index 61%
> > > rename from meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> > > rename to meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > > index 02b5b43bdd7e..a9e6b581a50e 100644
> > > --- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> > > +++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > > @@ -9,16 +9,16 @@ SUMMARY = "Baremetal GCC for Aarch64 processors"
> > > LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
> > >
> > > LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
> > > -LIC_FILES_CHKSUM:aarch64 =
> > > "file://share/doc/gcc/Copying.html;md5=d06ace534ed0851debcb7140c5b5116e"
> > > -LIC_FILES_CHKSUM:x86-64 =
> > > "file://share/doc/gcc/Copying.html;md5=e4bcb5bee0c4a50c06704b0b73fcbe0c"
> > > +LIC_FILES_CHKSUM:aarch64 =
> > > "file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
> > > +LIC_FILES_CHKSUM:x86-64 =
> > > "file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
> > >
> > > -PROVIDES = "virtual/aarch64-none-elf-gcc"
> > > +PROVIDES = "virtual/${BINNAME}-gcc"
> > >
> > > -SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-a/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
> > > -SRC_URI[gnu-a-aarch64.sha256sum] =
> > > "768a5db41d93f48838f1c4bfeae26930df2320c09f0dfa798321082fb937955f"
> > > -SRC_URI[gnu-a-x86_64.sha256sum] =
> > > "6f74b1ee370caeb716688d2e467e5b44727fdc0ed56023fe5c72c0620019ecef"
> > > +SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
> > > +SRC_URI[gnu-a-aarch64.sha256sum] =
> > > "3b15725545a0211a17b63e72d4f10241f7ffbe7ce94cb9612590ceacde16992c"
> > > +SRC_URI[gnu-a-x86_64.sha256sum] =
> > > "b0a015a9e8cbb44ed2fe5ad755a7a7ae254d54f93df3bf47378485b0ba8b828b"
> > >
> > > S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
> > >
> > > -UPSTREAM_CHECK_URI =
> > > "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-a/downloads"
> > > +UPSTREAM_CHECK_URI =
> > > "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
> > > UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
> > > diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > > b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > > similarity index 35%
> > > rename from meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > > rename to meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > > index ad7e81617d74..930bb5261be8 100644
> > > --- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > > +++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > > @@ -8,13 +8,17 @@ COMPATIBLE_HOST = "(x86_64|aarch64).*-linux"
> > > SUMMARY = "Baremetal GCC for ARM-R and ARM-M processors"
> > > LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
> > >
> > > -LIC_FILES_CHKSUM =
> > > "file://share/doc/gcc-arm-none-eabi/license.txt;md5=c18349634b740b7b95f2c2159af888f5"
> > > +LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
> > > +LIC_FILES_CHKSUM:aarch64 =
> > > "file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
> > > +LIC_FILES_CHKSUM:x86-64 =
> > > "file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
> > >
> > > -PROVIDES = "virtual/arm-none-eabi-gcc"
> > > +PROVIDES = "virtual/${BINNAME}-gcc"
> > >
> > > -SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-rm/${PV}/${BP}-${HOST_ARCH}-linux.tar.bz2;name=gnu-rm-${HOST_ARCH}"
> > > -SRC_URI[gnu-rm-aarch64.sha256sum] =
> > > "f605b5f23ca898e9b8b665be208510a54a6e9fdd0fa5bfc9592002f6e7431208"
> > > -SRC_URI[gnu-rm-x86_64.sha256sum] =
> > > "97dbb4f019ad1650b732faffcc881689cedc14e2b7ee863d390e0a41ef16c9a3"
> > > +SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-rm-${HOST_ARCH}"
> > > +SRC_URI[gnu-rm-aarch64.sha256sum] =
> > > "dd861d188f4061a7ef3857c948376f84ef1dfb88a32aded7c336ed7e47e60970"
> > > +SRC_URI[gnu-rm-x86_64.sha256sum] =
> > > "8c5acd5ae567c0100245b0556941c237369f210bceb196edfe5a2e7532c60326"
> > >
> > > -UPSTREAM_CHECK_URI =
> > > "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-rm/downloads"
> > > -UPSTREAM_CHECK_REGEX = "${BPN}-(?P<pver>.+)-${HOST_ARCH}-linux\.tar\.\w+"
> > > +S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
> > > +
> > > +UPSTREAM_CHECK_URI =
> > > "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
> > > +UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > On Tue, Mar 22, 2022 at 1:30 PM Denys Dmytriyenko <denis@denix.org> wrote:
> > > >
> > > > On Tue, Mar 22, 2022 at 09:43:27AM -0400, Jon Mason wrote:
> > > > > There is a new and unified version of the toolchains (no longer the RM
> > > > > and A toolchain split). Update the paths and SHAs to reflect the new
> > > > > location.
> > > > >
> > > > > NOTE: with this change, the binary toolchains do not appear to work
> > > > >
> > > > > Signed-off-by: Jon Mason <jon.mason@arm.com>
> > > > > ---
> > > > > ci/get-binary-toolchains | 13 ++++++----
> > > > > ...b => gcc-aarch64-none-elf_11.2-2022.02.bb} | 14 +++++------
> > > > > .../gcc-arm-none-eabi_10.3-2021.10.bb | 20 ----------------
> > > > > .../gcc-arm-none-eabi_11.2-2022.02.bb | 24 +++++++++++++++++++
> > > > > 4 files changed, 39 insertions(+), 32 deletions(-)
> > > > > rename meta-arm-toolchain/recipes-devtools/external-arm-toolchain/{gcc-aarch64-none-elf_10.3-2021.07.bb => gcc-aarch64-none-elf_11.2-2022.02.bb} (61%)
> > > > > delete mode 100644 meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > > > > create mode 100644 meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > > >
> > > > Any chance to lower the similarity threshold to make it a diff for review,
> > > > instead of remove/add?
> > > >
> > > >
> > > > > diff --git a/ci/get-binary-toolchains b/ci/get-binary-toolchains
> > > > > index 838342a1c572..394ce4131b9f 100755
> > > > > --- a/ci/get-binary-toolchains
> > > > > +++ b/ci/get-binary-toolchains
> > > > > @@ -2,7 +2,7 @@
> > > > > set -u
> > > > >
> > > > > HOST_ARCH=$(uname -m)
> > > > > -VER="10.3-2021.07"
> > > > > +VER="11.2-2022.02"
> > > > >
> > > > > DOWNLOAD_DIR=$1
> > > > > TOOLCHAIN_DIR=$2
> > > > > @@ -15,18 +15,21 @@ if [ $HOST_ARCH = "aarch64" ]; then
> > > > > #AArch64 Linux hosted cross compilers
> > > > >
> > > > > #AArch32 target with hard float (arm-none-linux-gnueabihf)
> > > > > - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > > > +
> > > > > + #AArch64 GNU/Linux target (aarch64-none-linux-gnu)
> > > > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > > > > elif [ $HOST_ARCH = "x86_64" ]; then
> > > > > #x86_64 Linux hosted cross compilers
> > > > >
> > > > > #AArch32 target with hard float (arm-linux-none-gnueabihf)
> > > > > - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > > >
> > > > > #AArch64 GNU/Linux target (aarch64-none-linux-gnu)
> > > > > - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > > > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > > > >
> > > > > #AArch64 GNU/Linux target (aarch64_be-none-linux-gnu)
> > > > > - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
> > > > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
> > > > > else
> > > > > echo "ERROR - Unknown build arch of $HOST_ARCH"
> > > > > exit 1
> > > > > diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > > > > similarity index 61%
> > > > > rename from meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> > > > > rename to meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > > > > index 02b5b43bdd7e..a9e6b581a50e 100644
> > > > > --- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> > > > > +++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > > > > @@ -9,16 +9,16 @@ SUMMARY = "Baremetal GCC for Aarch64 processors"
> > > > > LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
> > > > >
> > > > > LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
> > > > > -LIC_FILES_CHKSUM:aarch64 = "file://share/doc/gcc/Copying.html;md5=d06ace534ed0851debcb7140c5b5116e"
> > > > > -LIC_FILES_CHKSUM:x86-64 = "file://share/doc/gcc/Copying.html;md5=e4bcb5bee0c4a50c06704b0b73fcbe0c"
> > > > > +LIC_FILES_CHKSUM:aarch64 = "file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
> > > > > +LIC_FILES_CHKSUM:x86-64 = "file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
> > > > >
> > > > > -PROVIDES = "virtual/aarch64-none-elf-gcc"
> > > > > +PROVIDES = "virtual/${BINNAME}-gcc"
> > > > >
> > > > > -SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-a/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
> > > > > -SRC_URI[gnu-a-aarch64.sha256sum] = "768a5db41d93f48838f1c4bfeae26930df2320c09f0dfa798321082fb937955f"
> > > > > -SRC_URI[gnu-a-x86_64.sha256sum] = "6f74b1ee370caeb716688d2e467e5b44727fdc0ed56023fe5c72c0620019ecef"
> > > > > +SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
> > > > > +SRC_URI[gnu-a-aarch64.sha256sum] = "3b15725545a0211a17b63e72d4f10241f7ffbe7ce94cb9612590ceacde16992c"
> > > > > +SRC_URI[gnu-a-x86_64.sha256sum] = "b0a015a9e8cbb44ed2fe5ad755a7a7ae254d54f93df3bf47378485b0ba8b828b"
> > > > >
> > > > > S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
> > > > >
> > > > > -UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-a/downloads"
> > > > > +UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
> > > > > UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
> > > > > diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > > > > deleted file mode 100644
> > > > > index ad7e81617d74..000000000000
> > > > > --- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > > > > +++ /dev/null
> > > > > @@ -1,20 +0,0 @@
> > > > > -# Copyright (C) 2019 Garmin Ltd. or its subsidiaries
> > > > > -# Released under the MIT license (see COPYING.MIT for the terms)
> > > > > -
> > > > > -require arm-binary-toolchain.inc
> > > > > -
> > > > > -COMPATIBLE_HOST = "(x86_64|aarch64).*-linux"
> > > > > -
> > > > > -SUMMARY = "Baremetal GCC for ARM-R and ARM-M processors"
> > > > > -LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
> > > > > -
> > > > > -LIC_FILES_CHKSUM = "file://share/doc/gcc-arm-none-eabi/license.txt;md5=c18349634b740b7b95f2c2159af888f5"
> > > > > -
> > > > > -PROVIDES = "virtual/arm-none-eabi-gcc"
> > > > > -
> > > > > -SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-rm/${PV}/${BP}-${HOST_ARCH}-linux.tar.bz2;name=gnu-rm-${HOST_ARCH}"
> > > > > -SRC_URI[gnu-rm-aarch64.sha256sum] = "f605b5f23ca898e9b8b665be208510a54a6e9fdd0fa5bfc9592002f6e7431208"
> > > > > -SRC_URI[gnu-rm-x86_64.sha256sum] = "97dbb4f019ad1650b732faffcc881689cedc14e2b7ee863d390e0a41ef16c9a3"
> > > > > -
> > > > > -UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-rm/downloads"
> > > > > -UPSTREAM_CHECK_REGEX = "${BPN}-(?P<pver>.+)-${HOST_ARCH}-linux\.tar\.\w+"
> > > > > diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > > > > new file mode 100644
> > > > > index 000000000000..4e9fe35789f9
> > > > > --- /dev/null
> > > > > +++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > > > > @@ -0,0 +1,24 @@
> > > > > +# Copyright (C) 2019 Garmin Ltd. or its subsidiaries
> > > > > +# Released under the MIT license (see COPYING.MIT for the terms)
> > > > > +
> > > > > +require arm-binary-toolchain.inc
> > > > > +
> > > > > +COMPATIBLE_HOST = "(x86_64|aarch64).*-linux"
> > > > > +
> > > > > +SUMMARY = "Baremetal GCC for ARM-R and ARM-M processors"
> > > > > +LICENSE = "GPL-3.0-with-GCC-exception & GPLv3"
> > > > > +
> > > > > +LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
> > > > > +LIC_FILES_CHKSUM:aarch64 = "file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
> > > > > +LIC_FILES_CHKSUM:x86-64 = "file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
> > > > > +
> > > > > +PROVIDES = "virtual/${BINNAME}-gcc"
> > > > > +
> > > > > +SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-rm-${HOST_ARCH}"
> > > > > +SRC_URI[gnu-rm-aarch64.sha256sum] = "dd861d188f4061a7ef3857c948376f84ef1dfb88a32aded7c336ed7e47e60970"
> > > > > +SRC_URI[gnu-rm-x86_64.sha256sum] = "8c5acd5ae567c0100245b0556941c237369f210bceb196edfe5a2e7532c60326"
> > > > > +
> > > > > +S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
> > > > > +
> > > > > +UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
> > > > > +UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
> > > > > --
> > > > > 2.30.2
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [meta-arm] [RFC] arm-toolchain: upgrade toolchains to 11.2-2002.02
2022-03-30 20:15 ` Denys Dmytriyenko
@ 2022-04-04 13:44 ` Sumit Garg
2022-04-07 15:34 ` Jon Mason
0 siblings, 1 reply; 9+ messages in thread
From: Sumit Garg @ 2022-04-04 13:44 UTC (permalink / raw)
To: Denys Dmytriyenko, Jon Mason; +Cc: meta-arm
Hi Denys and Jon,
On Thu, 31 Mar 2022 at 01:45, Denys Dmytriyenko <denis@denix.org> wrote:
>
> On Tue, Mar 22, 2022 at 05:08:41PM -0400, Jon Mason wrote:
> > On Tue, Mar 22, 2022 at 3:27 PM Denys Dmytriyenko <denis@denix.org> wrote:
> > >
> > > On Tue, Mar 22, 2022 at 03:20:37PM -0400, Jon Mason wrote:
> > > > After a minor change and using -M25%
> > >
> > > Thanks! The patch is obviously malformed as it was sent as a reply, but
> > > otherwise looks good to me.
> > >
> > > Feel free to add to the real patch:
> > >
> > > Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
>
> I have to retract my Reviewed-by, as the patch seems incorrect.
>
>
> > If only this one worked. I'm still seeing the error with do_install
> > https://gitlab.com/jonmason00/meta-arm/-/jobs/2236954115
> >
> > And no actual error in the log, and I'm not sure where to begin
> > debugging it without an error in the log. You can pull the code down
> > from my gitlab
> > https://gitlab.com/jonmason00/meta-arm/
> > branch dev3
> >
> > I would really appreciate your reviewed-by for the other patch (as I
> > can actually confirm it works in our CI, and I'd like to get it in
> > before the code freeze at the end of the month).
> > https://lists.yoctoproject.org/g/meta-arm/message/3191
>
> Here's the thing - you are updating baremetal toolchain recipes, which
> download their release tarballs on their own and not by CI.
>
> You are also changing CI part that downloads Linux toolchain used by
> external-toolchain, not by baremetal toolchains.
>
> So, you are feeding newer 11.2 Linux toolchain release to external-toolchain
> recipe that might need updating also due to subtle changes in their release
> structure.
>
> There are 3 different types of toolchains in meta-arm-toolchain:
>
> 1. ARM Linux toolchain built from sources, then used to build the rest of the
> Linux system - recipes-devtool/gcc
>
> 2. ARM Linux toolchain using prebuilt binaries, expects those binaries to
> exist on the host (downloaded by CI) and the recipe then scrapes required
> pieces into sysroot, which then used to build the rest of the Linux system -
> recipes-devtools/external-arm-toolchain/external-arm-toolchain.bb
Earlier I guessed that it should work without any changes but it looks
like GNU-A and GNU-RM merge led to significant changes in libc
packaging, see below.
>
> 3. ARM baremetal toolchains used to build firmware and non-Linux components,
> recipes are self-contained and download their binaries on their own -
> recipes-devtools/external-arm-toolchain/gcc-$arch-none-{elf/eabi}_*.bb
>
> All 3 are independent of each other and have no re-use between them, as they
> are different. And thus can have different versions. #1 and #2 are mutually
> exclusive, as that's your main Linux toolchain. #3 can co-exist with either
> one of those two as it's for baremetal components.
>
>
> So, Sumit's first patch updated #1 - source Linux toolchain. His second patch
> tried to update CI for #2 - external prebuilt Linux toolchain. That's where
> the error is coming from.
>
> You then re-spinned the patch and besides updating CI for #2 toolchain, also
> bumped up #3 baremetal toolchains. The error is still there though and is in
> external prebuilt Linux toolchain (#2), not in baremetal toolchains (#3).
>
> As I said earlier, it seems external-arm-toolchain also needs some adjustments
> for 11.2 besides pulling new tarballs in CI.
>
> I might be able to find some time and look into fixing external-arm-toolchain
> to work with 11.2 prebuilt binary release in the next couple days.
It looks like there have been a lot of changes to how glibc is
packaged into the toolchain. As an example we can no longer find any
symlinks to "lib*-${EAT_VER_LIBC}.so" in 11.2 prebuilt toolchain. So I
will try to add corresponding support but it may take time with
testing involved.
> Worst case
> scenario - split your patch and only merge baremetal update, leaving CI at
> 10.3 for now for external-arm-toolchain...
We should go ahead with this strategy.
-Sumit
>
>
> PS. it appears Patchwork is missing some patches, specifically both Sumit's
> first version to update #1, as well as your second re-spin for the same.
> Wonder if it's due to the patch size...
>
> --
> Denys
>
>
> > > > diff --git a/ci/get-binary-toolchains b/ci/get-binary-toolchains
> > > > index 838342a1c572..394ce4131b9f 100755
> > > > --- a/ci/get-binary-toolchains
> > > > +++ b/ci/get-binary-toolchains
> > > > @@ -2,7 +2,7 @@
> > > > set -u
> > > >
> > > > HOST_ARCH=$(uname -m)
> > > > -VER="10.3-2021.07"
> > > > +VER="11.2-2022.02"
> > > >
> > > > DOWNLOAD_DIR=$1
> > > > TOOLCHAIN_DIR=$2
> > > > @@ -15,18 +15,21 @@ if [ $HOST_ARCH = "aarch64" ]; then
> > > > #AArch64 Linux hosted cross compilers
> > > >
> > > > #AArch32 target with hard float (arm-none-linux-gnueabihf)
> > > > - wget -P $DOWNLOAD_DIR -nc
> > > > https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > > + wget -P $DOWNLOAD_DIR -nc
> > > > https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > > +
> > > > + #AArch64 GNU/Linux target (aarch64-none-linux-gnu)
> > > > + wget -P $DOWNLOAD_DIR -nc
> > > > https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > > > elif [ $HOST_ARCH = "x86_64" ]; then
> > > > #x86_64 Linux hosted cross compilers
> > > >
> > > > #AArch32 target with hard float (arm-linux-none-gnueabihf)
> > > > - wget -P $DOWNLOAD_DIR -nc
> > > > https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > > + wget -P $DOWNLOAD_DIR -nc
> > > > https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > >
> > > > #AArch64 GNU/Linux target (aarch64-none-linux-gnu)
> > > > - wget -P $DOWNLOAD_DIR -nc
> > > > https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > > > + wget -P $DOWNLOAD_DIR -nc
> > > > https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > > >
> > > > #AArch64 GNU/Linux target (aarch64_be-none-linux-gnu)
> > > > - wget -P $DOWNLOAD_DIR -nc
> > > > https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
> > > > + wget -P $DOWNLOAD_DIR -nc
> > > > https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
> > > > else
> > > > echo "ERROR - Unknown build arch of $HOST_ARCH"
> > > > exit 1
> > > > diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> > > > b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > > > similarity index 61%
> > > > rename from meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> > > > rename to meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > > > index 02b5b43bdd7e..a9e6b581a50e 100644
> > > > --- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> > > > +++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > > > @@ -9,16 +9,16 @@ SUMMARY = "Baremetal GCC for Aarch64 processors"
> > > > LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
> > > >
> > > > LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
> > > > -LIC_FILES_CHKSUM:aarch64 =
> > > > "file://share/doc/gcc/Copying.html;md5=d06ace534ed0851debcb7140c5b5116e"
> > > > -LIC_FILES_CHKSUM:x86-64 =
> > > > "file://share/doc/gcc/Copying.html;md5=e4bcb5bee0c4a50c06704b0b73fcbe0c"
> > > > +LIC_FILES_CHKSUM:aarch64 =
> > > > "file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
> > > > +LIC_FILES_CHKSUM:x86-64 =
> > > > "file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
> > > >
> > > > -PROVIDES = "virtual/aarch64-none-elf-gcc"
> > > > +PROVIDES = "virtual/${BINNAME}-gcc"
> > > >
> > > > -SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-a/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
> > > > -SRC_URI[gnu-a-aarch64.sha256sum] =
> > > > "768a5db41d93f48838f1c4bfeae26930df2320c09f0dfa798321082fb937955f"
> > > > -SRC_URI[gnu-a-x86_64.sha256sum] =
> > > > "6f74b1ee370caeb716688d2e467e5b44727fdc0ed56023fe5c72c0620019ecef"
> > > > +SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
> > > > +SRC_URI[gnu-a-aarch64.sha256sum] =
> > > > "3b15725545a0211a17b63e72d4f10241f7ffbe7ce94cb9612590ceacde16992c"
> > > > +SRC_URI[gnu-a-x86_64.sha256sum] =
> > > > "b0a015a9e8cbb44ed2fe5ad755a7a7ae254d54f93df3bf47378485b0ba8b828b"
> > > >
> > > > S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
> > > >
> > > > -UPSTREAM_CHECK_URI =
> > > > "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-a/downloads"
> > > > +UPSTREAM_CHECK_URI =
> > > > "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
> > > > UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
> > > > diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > > > b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > > > similarity index 35%
> > > > rename from meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > > > rename to meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > > > index ad7e81617d74..930bb5261be8 100644
> > > > --- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > > > +++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > > > @@ -8,13 +8,17 @@ COMPATIBLE_HOST = "(x86_64|aarch64).*-linux"
> > > > SUMMARY = "Baremetal GCC for ARM-R and ARM-M processors"
> > > > LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
> > > >
> > > > -LIC_FILES_CHKSUM =
> > > > "file://share/doc/gcc-arm-none-eabi/license.txt;md5=c18349634b740b7b95f2c2159af888f5"
> > > > +LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
> > > > +LIC_FILES_CHKSUM:aarch64 =
> > > > "file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
> > > > +LIC_FILES_CHKSUM:x86-64 =
> > > > "file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
> > > >
> > > > -PROVIDES = "virtual/arm-none-eabi-gcc"
> > > > +PROVIDES = "virtual/${BINNAME}-gcc"
> > > >
> > > > -SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-rm/${PV}/${BP}-${HOST_ARCH}-linux.tar.bz2;name=gnu-rm-${HOST_ARCH}"
> > > > -SRC_URI[gnu-rm-aarch64.sha256sum] =
> > > > "f605b5f23ca898e9b8b665be208510a54a6e9fdd0fa5bfc9592002f6e7431208"
> > > > -SRC_URI[gnu-rm-x86_64.sha256sum] =
> > > > "97dbb4f019ad1650b732faffcc881689cedc14e2b7ee863d390e0a41ef16c9a3"
> > > > +SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-rm-${HOST_ARCH}"
> > > > +SRC_URI[gnu-rm-aarch64.sha256sum] =
> > > > "dd861d188f4061a7ef3857c948376f84ef1dfb88a32aded7c336ed7e47e60970"
> > > > +SRC_URI[gnu-rm-x86_64.sha256sum] =
> > > > "8c5acd5ae567c0100245b0556941c237369f210bceb196edfe5a2e7532c60326"
> > > >
> > > > -UPSTREAM_CHECK_URI =
> > > > "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-rm/downloads"
> > > > -UPSTREAM_CHECK_REGEX = "${BPN}-(?P<pver>.+)-${HOST_ARCH}-linux\.tar\.\w+"
> > > > +S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
> > > > +
> > > > +UPSTREAM_CHECK_URI =
> > > > "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
> > > > +UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > On Tue, Mar 22, 2022 at 1:30 PM Denys Dmytriyenko <denis@denix.org> wrote:
> > > > >
> > > > > On Tue, Mar 22, 2022 at 09:43:27AM -0400, Jon Mason wrote:
> > > > > > There is a new and unified version of the toolchains (no longer the RM
> > > > > > and A toolchain split). Update the paths and SHAs to reflect the new
> > > > > > location.
> > > > > >
> > > > > > NOTE: with this change, the binary toolchains do not appear to work
> > > > > >
> > > > > > Signed-off-by: Jon Mason <jon.mason@arm.com>
> > > > > > ---
> > > > > > ci/get-binary-toolchains | 13 ++++++----
> > > > > > ...b => gcc-aarch64-none-elf_11.2-2022.02.bb} | 14 +++++------
> > > > > > .../gcc-arm-none-eabi_10.3-2021.10.bb | 20 ----------------
> > > > > > .../gcc-arm-none-eabi_11.2-2022.02.bb | 24 +++++++++++++++++++
> > > > > > 4 files changed, 39 insertions(+), 32 deletions(-)
> > > > > > rename meta-arm-toolchain/recipes-devtools/external-arm-toolchain/{gcc-aarch64-none-elf_10.3-2021.07.bb => gcc-aarch64-none-elf_11.2-2022.02.bb} (61%)
> > > > > > delete mode 100644 meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > > > > > create mode 100644 meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > > > >
> > > > > Any chance to lower the similarity threshold to make it a diff for review,
> > > > > instead of remove/add?
> > > > >
> > > > >
> > > > > > diff --git a/ci/get-binary-toolchains b/ci/get-binary-toolchains
> > > > > > index 838342a1c572..394ce4131b9f 100755
> > > > > > --- a/ci/get-binary-toolchains
> > > > > > +++ b/ci/get-binary-toolchains
> > > > > > @@ -2,7 +2,7 @@
> > > > > > set -u
> > > > > >
> > > > > > HOST_ARCH=$(uname -m)
> > > > > > -VER="10.3-2021.07"
> > > > > > +VER="11.2-2022.02"
> > > > > >
> > > > > > DOWNLOAD_DIR=$1
> > > > > > TOOLCHAIN_DIR=$2
> > > > > > @@ -15,18 +15,21 @@ if [ $HOST_ARCH = "aarch64" ]; then
> > > > > > #AArch64 Linux hosted cross compilers
> > > > > >
> > > > > > #AArch32 target with hard float (arm-none-linux-gnueabihf)
> > > > > > - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > > > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > > > > +
> > > > > > + #AArch64 GNU/Linux target (aarch64-none-linux-gnu)
> > > > > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > > > > > elif [ $HOST_ARCH = "x86_64" ]; then
> > > > > > #x86_64 Linux hosted cross compilers
> > > > > >
> > > > > > #AArch32 target with hard float (arm-linux-none-gnueabihf)
> > > > > > - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > > > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > > > >
> > > > > > #AArch64 GNU/Linux target (aarch64-none-linux-gnu)
> > > > > > - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > > > > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > > > > >
> > > > > > #AArch64 GNU/Linux target (aarch64_be-none-linux-gnu)
> > > > > > - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
> > > > > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
> > > > > > else
> > > > > > echo "ERROR - Unknown build arch of $HOST_ARCH"
> > > > > > exit 1
> > > > > > diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > > > > > similarity index 61%
> > > > > > rename from meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> > > > > > rename to meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > > > > > index 02b5b43bdd7e..a9e6b581a50e 100644
> > > > > > --- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> > > > > > +++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > > > > > @@ -9,16 +9,16 @@ SUMMARY = "Baremetal GCC for Aarch64 processors"
> > > > > > LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
> > > > > >
> > > > > > LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
> > > > > > -LIC_FILES_CHKSUM:aarch64 = "file://share/doc/gcc/Copying.html;md5=d06ace534ed0851debcb7140c5b5116e"
> > > > > > -LIC_FILES_CHKSUM:x86-64 = "file://share/doc/gcc/Copying.html;md5=e4bcb5bee0c4a50c06704b0b73fcbe0c"
> > > > > > +LIC_FILES_CHKSUM:aarch64 = "file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
> > > > > > +LIC_FILES_CHKSUM:x86-64 = "file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
> > > > > >
> > > > > > -PROVIDES = "virtual/aarch64-none-elf-gcc"
> > > > > > +PROVIDES = "virtual/${BINNAME}-gcc"
> > > > > >
> > > > > > -SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-a/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
> > > > > > -SRC_URI[gnu-a-aarch64.sha256sum] = "768a5db41d93f48838f1c4bfeae26930df2320c09f0dfa798321082fb937955f"
> > > > > > -SRC_URI[gnu-a-x86_64.sha256sum] = "6f74b1ee370caeb716688d2e467e5b44727fdc0ed56023fe5c72c0620019ecef"
> > > > > > +SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
> > > > > > +SRC_URI[gnu-a-aarch64.sha256sum] = "3b15725545a0211a17b63e72d4f10241f7ffbe7ce94cb9612590ceacde16992c"
> > > > > > +SRC_URI[gnu-a-x86_64.sha256sum] = "b0a015a9e8cbb44ed2fe5ad755a7a7ae254d54f93df3bf47378485b0ba8b828b"
> > > > > >
> > > > > > S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
> > > > > >
> > > > > > -UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-a/downloads"
> > > > > > +UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
> > > > > > UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
> > > > > > diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > > > > > deleted file mode 100644
> > > > > > index ad7e81617d74..000000000000
> > > > > > --- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > > > > > +++ /dev/null
> > > > > > @@ -1,20 +0,0 @@
> > > > > > -# Copyright (C) 2019 Garmin Ltd. or its subsidiaries
> > > > > > -# Released under the MIT license (see COPYING.MIT for the terms)
> > > > > > -
> > > > > > -require arm-binary-toolchain.inc
> > > > > > -
> > > > > > -COMPATIBLE_HOST = "(x86_64|aarch64).*-linux"
> > > > > > -
> > > > > > -SUMMARY = "Baremetal GCC for ARM-R and ARM-M processors"
> > > > > > -LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
> > > > > > -
> > > > > > -LIC_FILES_CHKSUM = "file://share/doc/gcc-arm-none-eabi/license.txt;md5=c18349634b740b7b95f2c2159af888f5"
> > > > > > -
> > > > > > -PROVIDES = "virtual/arm-none-eabi-gcc"
> > > > > > -
> > > > > > -SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-rm/${PV}/${BP}-${HOST_ARCH}-linux.tar.bz2;name=gnu-rm-${HOST_ARCH}"
> > > > > > -SRC_URI[gnu-rm-aarch64.sha256sum] = "f605b5f23ca898e9b8b665be208510a54a6e9fdd0fa5bfc9592002f6e7431208"
> > > > > > -SRC_URI[gnu-rm-x86_64.sha256sum] = "97dbb4f019ad1650b732faffcc881689cedc14e2b7ee863d390e0a41ef16c9a3"
> > > > > > -
> > > > > > -UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-rm/downloads"
> > > > > > -UPSTREAM_CHECK_REGEX = "${BPN}-(?P<pver>.+)-${HOST_ARCH}-linux\.tar\.\w+"
> > > > > > diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > > > > > new file mode 100644
> > > > > > index 000000000000..4e9fe35789f9
> > > > > > --- /dev/null
> > > > > > +++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > > > > > @@ -0,0 +1,24 @@
> > > > > > +# Copyright (C) 2019 Garmin Ltd. or its subsidiaries
> > > > > > +# Released under the MIT license (see COPYING.MIT for the terms)
> > > > > > +
> > > > > > +require arm-binary-toolchain.inc
> > > > > > +
> > > > > > +COMPATIBLE_HOST = "(x86_64|aarch64).*-linux"
> > > > > > +
> > > > > > +SUMMARY = "Baremetal GCC for ARM-R and ARM-M processors"
> > > > > > +LICENSE = "GPL-3.0-with-GCC-exception & GPLv3"
> > > > > > +
> > > > > > +LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
> > > > > > +LIC_FILES_CHKSUM:aarch64 = "file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
> > > > > > +LIC_FILES_CHKSUM:x86-64 = "file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
> > > > > > +
> > > > > > +PROVIDES = "virtual/${BINNAME}-gcc"
> > > > > > +
> > > > > > +SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-rm-${HOST_ARCH}"
> > > > > > +SRC_URI[gnu-rm-aarch64.sha256sum] = "dd861d188f4061a7ef3857c948376f84ef1dfb88a32aded7c336ed7e47e60970"
> > > > > > +SRC_URI[gnu-rm-x86_64.sha256sum] = "8c5acd5ae567c0100245b0556941c237369f210bceb196edfe5a2e7532c60326"
> > > > > > +
> > > > > > +S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
> > > > > > +
> > > > > > +UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
> > > > > > +UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
> > > > > > --
> > > > > > 2.30.2
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [meta-arm] [RFC] arm-toolchain: upgrade toolchains to 11.2-2002.02
2022-04-04 13:44 ` Sumit Garg
@ 2022-04-07 15:34 ` Jon Mason
2022-04-28 12:36 ` Sumit Garg
0 siblings, 1 reply; 9+ messages in thread
From: Jon Mason @ 2022-04-07 15:34 UTC (permalink / raw)
To: Sumit Garg; +Cc: Denys Dmytriyenko, meta-arm
On Mon, Apr 04, 2022 at 07:14:45PM +0530, Sumit Garg wrote:
> Hi Denys and Jon,
>
> On Thu, 31 Mar 2022 at 01:45, Denys Dmytriyenko <denis@denix.org> wrote:
> >
> > On Tue, Mar 22, 2022 at 05:08:41PM -0400, Jon Mason wrote:
> > > On Tue, Mar 22, 2022 at 3:27 PM Denys Dmytriyenko <denis@denix.org> wrote:
> > > >
> > > > On Tue, Mar 22, 2022 at 03:20:37PM -0400, Jon Mason wrote:
> > > > > After a minor change and using -M25%
> > > >
> > > > Thanks! The patch is obviously malformed as it was sent as a reply, but
> > > > otherwise looks good to me.
> > > >
> > > > Feel free to add to the real patch:
> > > >
> > > > Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
> >
> > I have to retract my Reviewed-by, as the patch seems incorrect.
> >
> >
> > > If only this one worked. I'm still seeing the error with do_install
> > > https://gitlab.com/jonmason00/meta-arm/-/jobs/2236954115
> > >
> > > And no actual error in the log, and I'm not sure where to begin
> > > debugging it without an error in the log. You can pull the code down
> > > from my gitlab
> > > https://gitlab.com/jonmason00/meta-arm/
> > > branch dev3
> > >
> > > I would really appreciate your reviewed-by for the other patch (as I
> > > can actually confirm it works in our CI, and I'd like to get it in
> > > before the code freeze at the end of the month).
> > > https://lists.yoctoproject.org/g/meta-arm/message/3191
> >
> > Here's the thing - you are updating baremetal toolchain recipes, which
> > download their release tarballs on their own and not by CI.
> >
> > You are also changing CI part that downloads Linux toolchain used by
> > external-toolchain, not by baremetal toolchains.
> >
> > So, you are feeding newer 11.2 Linux toolchain release to external-toolchain
> > recipe that might need updating also due to subtle changes in their release
> > structure.
> >
> > There are 3 different types of toolchains in meta-arm-toolchain:
> >
> > 1. ARM Linux toolchain built from sources, then used to build the rest of the
> > Linux system - recipes-devtool/gcc
> >
> > 2. ARM Linux toolchain using prebuilt binaries, expects those binaries to
> > exist on the host (downloaded by CI) and the recipe then scrapes required
> > pieces into sysroot, which then used to build the rest of the Linux system -
> > recipes-devtools/external-arm-toolchain/external-arm-toolchain.bb
>
> Earlier I guessed that it should work without any changes but it looks
> like GNU-A and GNU-RM merge led to significant changes in libc
> packaging, see below.
>
> >
> > 3. ARM baremetal toolchains used to build firmware and non-Linux components,
> > recipes are self-contained and download their binaries on their own -
> > recipes-devtools/external-arm-toolchain/gcc-$arch-none-{elf/eabi}_*.bb
> >
> > All 3 are independent of each other and have no re-use between them, as they
> > are different. And thus can have different versions. #1 and #2 are mutually
> > exclusive, as that's your main Linux toolchain. #3 can co-exist with either
> > one of those two as it's for baremetal components.
> >
> >
> > So, Sumit's first patch updated #1 - source Linux toolchain. His second patch
> > tried to update CI for #2 - external prebuilt Linux toolchain. That's where
> > the error is coming from.
> >
> > You then re-spinned the patch and besides updating CI for #2 toolchain, also
> > bumped up #3 baremetal toolchains. The error is still there though and is in
> > external prebuilt Linux toolchain (#2), not in baremetal toolchains (#3).
> >
> > As I said earlier, it seems external-arm-toolchain also needs some adjustments
> > for 11.2 besides pulling new tarballs in CI.
> >
> > I might be able to find some time and look into fixing external-arm-toolchain
> > to work with 11.2 prebuilt binary release in the next couple days.
>
> It looks like there have been a lot of changes to how glibc is
> packaged into the toolchain. As an example we can no longer find any
> symlinks to "lib*-${EAT_VER_LIBC}.so" in 11.2 prebuilt toolchain. So I
> will try to add corresponding support but it may take time with
> testing involved.
>
> > Worst case
> > scenario - split your patch and only merge baremetal update, leaving CI at
> > 10.3 for now for external-arm-toolchain...
>
> We should go ahead with this strategy.
I would very much like both of the toolchains at the same version, but
I understand this might not be possible with release schedules being
what they are and the need for testing. While waiting for this, we'll
stick with the split.
I appreciate everyone trying to get this done and I'm happy to help in
any way I can.
Thanks,
Jon
>
> -Sumit
>
> >
> >
> > PS. it appears Patchwork is missing some patches, specifically both Sumit's
> > first version to update #1, as well as your second re-spin for the same.
> > Wonder if it's due to the patch size...
> >
> > --
> > Denys
> >
> >
> > > > > diff --git a/ci/get-binary-toolchains b/ci/get-binary-toolchains
> > > > > index 838342a1c572..394ce4131b9f 100755
> > > > > --- a/ci/get-binary-toolchains
> > > > > +++ b/ci/get-binary-toolchains
> > > > > @@ -2,7 +2,7 @@
> > > > > set -u
> > > > >
> > > > > HOST_ARCH=$(uname -m)
> > > > > -VER="10.3-2021.07"
> > > > > +VER="11.2-2022.02"
> > > > >
> > > > > DOWNLOAD_DIR=$1
> > > > > TOOLCHAIN_DIR=$2
> > > > > @@ -15,18 +15,21 @@ if [ $HOST_ARCH = "aarch64" ]; then
> > > > > #AArch64 Linux hosted cross compilers
> > > > >
> > > > > #AArch32 target with hard float (arm-none-linux-gnueabihf)
> > > > > - wget -P $DOWNLOAD_DIR -nc
> > > > > https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > > > + wget -P $DOWNLOAD_DIR -nc
> > > > > https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > > > +
> > > > > + #AArch64 GNU/Linux target (aarch64-none-linux-gnu)
> > > > > + wget -P $DOWNLOAD_DIR -nc
> > > > > https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > > > > elif [ $HOST_ARCH = "x86_64" ]; then
> > > > > #x86_64 Linux hosted cross compilers
> > > > >
> > > > > #AArch32 target with hard float (arm-linux-none-gnueabihf)
> > > > > - wget -P $DOWNLOAD_DIR -nc
> > > > > https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > > > + wget -P $DOWNLOAD_DIR -nc
> > > > > https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > > >
> > > > > #AArch64 GNU/Linux target (aarch64-none-linux-gnu)
> > > > > - wget -P $DOWNLOAD_DIR -nc
> > > > > https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > > > > + wget -P $DOWNLOAD_DIR -nc
> > > > > https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > > > >
> > > > > #AArch64 GNU/Linux target (aarch64_be-none-linux-gnu)
> > > > > - wget -P $DOWNLOAD_DIR -nc
> > > > > https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
> > > > > + wget -P $DOWNLOAD_DIR -nc
> > > > > https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
> > > > > else
> > > > > echo "ERROR - Unknown build arch of $HOST_ARCH"
> > > > > exit 1
> > > > > diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> > > > > b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > > > > similarity index 61%
> > > > > rename from meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> > > > > rename to meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > > > > index 02b5b43bdd7e..a9e6b581a50e 100644
> > > > > --- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> > > > > +++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > > > > @@ -9,16 +9,16 @@ SUMMARY = "Baremetal GCC for Aarch64 processors"
> > > > > LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
> > > > >
> > > > > LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
> > > > > -LIC_FILES_CHKSUM:aarch64 =
> > > > > "file://share/doc/gcc/Copying.html;md5=d06ace534ed0851debcb7140c5b5116e"
> > > > > -LIC_FILES_CHKSUM:x86-64 =
> > > > > "file://share/doc/gcc/Copying.html;md5=e4bcb5bee0c4a50c06704b0b73fcbe0c"
> > > > > +LIC_FILES_CHKSUM:aarch64 =
> > > > > "file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
> > > > > +LIC_FILES_CHKSUM:x86-64 =
> > > > > "file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
> > > > >
> > > > > -PROVIDES = "virtual/aarch64-none-elf-gcc"
> > > > > +PROVIDES = "virtual/${BINNAME}-gcc"
> > > > >
> > > > > -SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-a/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
> > > > > -SRC_URI[gnu-a-aarch64.sha256sum] =
> > > > > "768a5db41d93f48838f1c4bfeae26930df2320c09f0dfa798321082fb937955f"
> > > > > -SRC_URI[gnu-a-x86_64.sha256sum] =
> > > > > "6f74b1ee370caeb716688d2e467e5b44727fdc0ed56023fe5c72c0620019ecef"
> > > > > +SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
> > > > > +SRC_URI[gnu-a-aarch64.sha256sum] =
> > > > > "3b15725545a0211a17b63e72d4f10241f7ffbe7ce94cb9612590ceacde16992c"
> > > > > +SRC_URI[gnu-a-x86_64.sha256sum] =
> > > > > "b0a015a9e8cbb44ed2fe5ad755a7a7ae254d54f93df3bf47378485b0ba8b828b"
> > > > >
> > > > > S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
> > > > >
> > > > > -UPSTREAM_CHECK_URI =
> > > > > "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-a/downloads"
> > > > > +UPSTREAM_CHECK_URI =
> > > > > "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
> > > > > UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
> > > > > diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > > > > b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > > > > similarity index 35%
> > > > > rename from meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > > > > rename to meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > > > > index ad7e81617d74..930bb5261be8 100644
> > > > > --- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > > > > +++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > > > > @@ -8,13 +8,17 @@ COMPATIBLE_HOST = "(x86_64|aarch64).*-linux"
> > > > > SUMMARY = "Baremetal GCC for ARM-R and ARM-M processors"
> > > > > LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
> > > > >
> > > > > -LIC_FILES_CHKSUM =
> > > > > "file://share/doc/gcc-arm-none-eabi/license.txt;md5=c18349634b740b7b95f2c2159af888f5"
> > > > > +LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
> > > > > +LIC_FILES_CHKSUM:aarch64 =
> > > > > "file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
> > > > > +LIC_FILES_CHKSUM:x86-64 =
> > > > > "file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
> > > > >
> > > > > -PROVIDES = "virtual/arm-none-eabi-gcc"
> > > > > +PROVIDES = "virtual/${BINNAME}-gcc"
> > > > >
> > > > > -SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-rm/${PV}/${BP}-${HOST_ARCH}-linux.tar.bz2;name=gnu-rm-${HOST_ARCH}"
> > > > > -SRC_URI[gnu-rm-aarch64.sha256sum] =
> > > > > "f605b5f23ca898e9b8b665be208510a54a6e9fdd0fa5bfc9592002f6e7431208"
> > > > > -SRC_URI[gnu-rm-x86_64.sha256sum] =
> > > > > "97dbb4f019ad1650b732faffcc881689cedc14e2b7ee863d390e0a41ef16c9a3"
> > > > > +SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-rm-${HOST_ARCH}"
> > > > > +SRC_URI[gnu-rm-aarch64.sha256sum] =
> > > > > "dd861d188f4061a7ef3857c948376f84ef1dfb88a32aded7c336ed7e47e60970"
> > > > > +SRC_URI[gnu-rm-x86_64.sha256sum] =
> > > > > "8c5acd5ae567c0100245b0556941c237369f210bceb196edfe5a2e7532c60326"
> > > > >
> > > > > -UPSTREAM_CHECK_URI =
> > > > > "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-rm/downloads"
> > > > > -UPSTREAM_CHECK_REGEX = "${BPN}-(?P<pver>.+)-${HOST_ARCH}-linux\.tar\.\w+"
> > > > > +S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
> > > > > +
> > > > > +UPSTREAM_CHECK_URI =
> > > > > "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
> > > > > +UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > On Tue, Mar 22, 2022 at 1:30 PM Denys Dmytriyenko <denis@denix.org> wrote:
> > > > > >
> > > > > > On Tue, Mar 22, 2022 at 09:43:27AM -0400, Jon Mason wrote:
> > > > > > > There is a new and unified version of the toolchains (no longer the RM
> > > > > > > and A toolchain split). Update the paths and SHAs to reflect the new
> > > > > > > location.
> > > > > > >
> > > > > > > NOTE: with this change, the binary toolchains do not appear to work
> > > > > > >
> > > > > > > Signed-off-by: Jon Mason <jon.mason@arm.com>
> > > > > > > ---
> > > > > > > ci/get-binary-toolchains | 13 ++++++----
> > > > > > > ...b => gcc-aarch64-none-elf_11.2-2022.02.bb} | 14 +++++------
> > > > > > > .../gcc-arm-none-eabi_10.3-2021.10.bb | 20 ----------------
> > > > > > > .../gcc-arm-none-eabi_11.2-2022.02.bb | 24 +++++++++++++++++++
> > > > > > > 4 files changed, 39 insertions(+), 32 deletions(-)
> > > > > > > rename meta-arm-toolchain/recipes-devtools/external-arm-toolchain/{gcc-aarch64-none-elf_10.3-2021.07.bb => gcc-aarch64-none-elf_11.2-2022.02.bb} (61%)
> > > > > > > delete mode 100644 meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > > > > > > create mode 100644 meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > > > > >
> > > > > > Any chance to lower the similarity threshold to make it a diff for review,
> > > > > > instead of remove/add?
> > > > > >
> > > > > >
> > > > > > > diff --git a/ci/get-binary-toolchains b/ci/get-binary-toolchains
> > > > > > > index 838342a1c572..394ce4131b9f 100755
> > > > > > > --- a/ci/get-binary-toolchains
> > > > > > > +++ b/ci/get-binary-toolchains
> > > > > > > @@ -2,7 +2,7 @@
> > > > > > > set -u
> > > > > > >
> > > > > > > HOST_ARCH=$(uname -m)
> > > > > > > -VER="10.3-2021.07"
> > > > > > > +VER="11.2-2022.02"
> > > > > > >
> > > > > > > DOWNLOAD_DIR=$1
> > > > > > > TOOLCHAIN_DIR=$2
> > > > > > > @@ -15,18 +15,21 @@ if [ $HOST_ARCH = "aarch64" ]; then
> > > > > > > #AArch64 Linux hosted cross compilers
> > > > > > >
> > > > > > > #AArch32 target with hard float (arm-none-linux-gnueabihf)
> > > > > > > - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > > > > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > > > > > +
> > > > > > > + #AArch64 GNU/Linux target (aarch64-none-linux-gnu)
> > > > > > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > > > > > > elif [ $HOST_ARCH = "x86_64" ]; then
> > > > > > > #x86_64 Linux hosted cross compilers
> > > > > > >
> > > > > > > #AArch32 target with hard float (arm-linux-none-gnueabihf)
> > > > > > > - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > > > > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > > > > >
> > > > > > > #AArch64 GNU/Linux target (aarch64-none-linux-gnu)
> > > > > > > - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > > > > > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > > > > > >
> > > > > > > #AArch64 GNU/Linux target (aarch64_be-none-linux-gnu)
> > > > > > > - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
> > > > > > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
> > > > > > > else
> > > > > > > echo "ERROR - Unknown build arch of $HOST_ARCH"
> > > > > > > exit 1
> > > > > > > diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > > > > > > similarity index 61%
> > > > > > > rename from meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> > > > > > > rename to meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > > > > > > index 02b5b43bdd7e..a9e6b581a50e 100644
> > > > > > > --- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> > > > > > > +++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > > > > > > @@ -9,16 +9,16 @@ SUMMARY = "Baremetal GCC for Aarch64 processors"
> > > > > > > LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
> > > > > > >
> > > > > > > LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
> > > > > > > -LIC_FILES_CHKSUM:aarch64 = "file://share/doc/gcc/Copying.html;md5=d06ace534ed0851debcb7140c5b5116e"
> > > > > > > -LIC_FILES_CHKSUM:x86-64 = "file://share/doc/gcc/Copying.html;md5=e4bcb5bee0c4a50c06704b0b73fcbe0c"
> > > > > > > +LIC_FILES_CHKSUM:aarch64 = "file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
> > > > > > > +LIC_FILES_CHKSUM:x86-64 = "file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
> > > > > > >
> > > > > > > -PROVIDES = "virtual/aarch64-none-elf-gcc"
> > > > > > > +PROVIDES = "virtual/${BINNAME}-gcc"
> > > > > > >
> > > > > > > -SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-a/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
> > > > > > > -SRC_URI[gnu-a-aarch64.sha256sum] = "768a5db41d93f48838f1c4bfeae26930df2320c09f0dfa798321082fb937955f"
> > > > > > > -SRC_URI[gnu-a-x86_64.sha256sum] = "6f74b1ee370caeb716688d2e467e5b44727fdc0ed56023fe5c72c0620019ecef"
> > > > > > > +SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
> > > > > > > +SRC_URI[gnu-a-aarch64.sha256sum] = "3b15725545a0211a17b63e72d4f10241f7ffbe7ce94cb9612590ceacde16992c"
> > > > > > > +SRC_URI[gnu-a-x86_64.sha256sum] = "b0a015a9e8cbb44ed2fe5ad755a7a7ae254d54f93df3bf47378485b0ba8b828b"
> > > > > > >
> > > > > > > S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
> > > > > > >
> > > > > > > -UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-a/downloads"
> > > > > > > +UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
> > > > > > > UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
> > > > > > > diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > > > > > > deleted file mode 100644
> > > > > > > index ad7e81617d74..000000000000
> > > > > > > --- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > > > > > > +++ /dev/null
> > > > > > > @@ -1,20 +0,0 @@
> > > > > > > -# Copyright (C) 2019 Garmin Ltd. or its subsidiaries
> > > > > > > -# Released under the MIT license (see COPYING.MIT for the terms)
> > > > > > > -
> > > > > > > -require arm-binary-toolchain.inc
> > > > > > > -
> > > > > > > -COMPATIBLE_HOST = "(x86_64|aarch64).*-linux"
> > > > > > > -
> > > > > > > -SUMMARY = "Baremetal GCC for ARM-R and ARM-M processors"
> > > > > > > -LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
> > > > > > > -
> > > > > > > -LIC_FILES_CHKSUM = "file://share/doc/gcc-arm-none-eabi/license.txt;md5=c18349634b740b7b95f2c2159af888f5"
> > > > > > > -
> > > > > > > -PROVIDES = "virtual/arm-none-eabi-gcc"
> > > > > > > -
> > > > > > > -SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-rm/${PV}/${BP}-${HOST_ARCH}-linux.tar.bz2;name=gnu-rm-${HOST_ARCH}"
> > > > > > > -SRC_URI[gnu-rm-aarch64.sha256sum] = "f605b5f23ca898e9b8b665be208510a54a6e9fdd0fa5bfc9592002f6e7431208"
> > > > > > > -SRC_URI[gnu-rm-x86_64.sha256sum] = "97dbb4f019ad1650b732faffcc881689cedc14e2b7ee863d390e0a41ef16c9a3"
> > > > > > > -
> > > > > > > -UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-rm/downloads"
> > > > > > > -UPSTREAM_CHECK_REGEX = "${BPN}-(?P<pver>.+)-${HOST_ARCH}-linux\.tar\.\w+"
> > > > > > > diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > > > > > > new file mode 100644
> > > > > > > index 000000000000..4e9fe35789f9
> > > > > > > --- /dev/null
> > > > > > > +++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > > > > > > @@ -0,0 +1,24 @@
> > > > > > > +# Copyright (C) 2019 Garmin Ltd. or its subsidiaries
> > > > > > > +# Released under the MIT license (see COPYING.MIT for the terms)
> > > > > > > +
> > > > > > > +require arm-binary-toolchain.inc
> > > > > > > +
> > > > > > > +COMPATIBLE_HOST = "(x86_64|aarch64).*-linux"
> > > > > > > +
> > > > > > > +SUMMARY = "Baremetal GCC for ARM-R and ARM-M processors"
> > > > > > > +LICENSE = "GPL-3.0-with-GCC-exception & GPLv3"
> > > > > > > +
> > > > > > > +LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
> > > > > > > +LIC_FILES_CHKSUM:aarch64 = "file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
> > > > > > > +LIC_FILES_CHKSUM:x86-64 = "file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
> > > > > > > +
> > > > > > > +PROVIDES = "virtual/${BINNAME}-gcc"
> > > > > > > +
> > > > > > > +SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-rm-${HOST_ARCH}"
> > > > > > > +SRC_URI[gnu-rm-aarch64.sha256sum] = "dd861d188f4061a7ef3857c948376f84ef1dfb88a32aded7c336ed7e47e60970"
> > > > > > > +SRC_URI[gnu-rm-x86_64.sha256sum] = "8c5acd5ae567c0100245b0556941c237369f210bceb196edfe5a2e7532c60326"
> > > > > > > +
> > > > > > > +S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
> > > > > > > +
> > > > > > > +UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
> > > > > > > +UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
> > > > > > > --
> > > > > > > 2.30.2
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [meta-arm] [RFC] arm-toolchain: upgrade toolchains to 11.2-2002.02
2022-04-07 15:34 ` Jon Mason
@ 2022-04-28 12:36 ` Sumit Garg
0 siblings, 0 replies; 9+ messages in thread
From: Sumit Garg @ 2022-04-28 12:36 UTC (permalink / raw)
To: Jon Mason; +Cc: Denys Dmytriyenko, meta-arm
Hi Jon,
On Thu, 7 Apr 2022 at 21:04, Jon Mason <jdmason@kudzu.us> wrote:
>
> On Mon, Apr 04, 2022 at 07:14:45PM +0530, Sumit Garg wrote:
> > Hi Denys and Jon,
> >
> > On Thu, 31 Mar 2022 at 01:45, Denys Dmytriyenko <denis@denix.org> wrote:
> > >
> > > On Tue, Mar 22, 2022 at 05:08:41PM -0400, Jon Mason wrote:
> > > > On Tue, Mar 22, 2022 at 3:27 PM Denys Dmytriyenko <denis@denix.org> wrote:
> > > > >
> > > > > On Tue, Mar 22, 2022 at 03:20:37PM -0400, Jon Mason wrote:
> > > > > > After a minor change and using -M25%
> > > > >
> > > > > Thanks! The patch is obviously malformed as it was sent as a reply, but
> > > > > otherwise looks good to me.
> > > > >
> > > > > Feel free to add to the real patch:
> > > > >
> > > > > Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
> > >
> > > I have to retract my Reviewed-by, as the patch seems incorrect.
> > >
> > >
> > > > If only this one worked. I'm still seeing the error with do_install
> > > > https://gitlab.com/jonmason00/meta-arm/-/jobs/2236954115
> > > >
> > > > And no actual error in the log, and I'm not sure where to begin
> > > > debugging it without an error in the log. You can pull the code down
> > > > from my gitlab
> > > > https://gitlab.com/jonmason00/meta-arm/
> > > > branch dev3
> > > >
> > > > I would really appreciate your reviewed-by for the other patch (as I
> > > > can actually confirm it works in our CI, and I'd like to get it in
> > > > before the code freeze at the end of the month).
> > > > https://lists.yoctoproject.org/g/meta-arm/message/3191
> > >
> > > Here's the thing - you are updating baremetal toolchain recipes, which
> > > download their release tarballs on their own and not by CI.
> > >
> > > You are also changing CI part that downloads Linux toolchain used by
> > > external-toolchain, not by baremetal toolchains.
> > >
> > > So, you are feeding newer 11.2 Linux toolchain release to external-toolchain
> > > recipe that might need updating also due to subtle changes in their release
> > > structure.
> > >
> > > There are 3 different types of toolchains in meta-arm-toolchain:
> > >
> > > 1. ARM Linux toolchain built from sources, then used to build the rest of the
> > > Linux system - recipes-devtool/gcc
> > >
> > > 2. ARM Linux toolchain using prebuilt binaries, expects those binaries to
> > > exist on the host (downloaded by CI) and the recipe then scrapes required
> > > pieces into sysroot, which then used to build the rest of the Linux system -
> > > recipes-devtools/external-arm-toolchain/external-arm-toolchain.bb
> >
> > Earlier I guessed that it should work without any changes but it looks
> > like GNU-A and GNU-RM merge led to significant changes in libc
> > packaging, see below.
> >
> > >
> > > 3. ARM baremetal toolchains used to build firmware and non-Linux components,
> > > recipes are self-contained and download their binaries on their own -
> > > recipes-devtools/external-arm-toolchain/gcc-$arch-none-{elf/eabi}_*.bb
> > >
> > > All 3 are independent of each other and have no re-use between them, as they
> > > are different. And thus can have different versions. #1 and #2 are mutually
> > > exclusive, as that's your main Linux toolchain. #3 can co-exist with either
> > > one of those two as it's for baremetal components.
> > >
> > >
> > > So, Sumit's first patch updated #1 - source Linux toolchain. His second patch
> > > tried to update CI for #2 - external prebuilt Linux toolchain. That's where
> > > the error is coming from.
> > >
> > > You then re-spinned the patch and besides updating CI for #2 toolchain, also
> > > bumped up #3 baremetal toolchains. The error is still there though and is in
> > > external prebuilt Linux toolchain (#2), not in baremetal toolchains (#3).
> > >
> > > As I said earlier, it seems external-arm-toolchain also needs some adjustments
> > > for 11.2 besides pulling new tarballs in CI.
> > >
> > > I might be able to find some time and look into fixing external-arm-toolchain
> > > to work with 11.2 prebuilt binary release in the next couple days.
> >
> > It looks like there have been a lot of changes to how glibc is
> > packaged into the toolchain. As an example we can no longer find any
> > symlinks to "lib*-${EAT_VER_LIBC}.so" in 11.2 prebuilt toolchain. So I
> > will try to add corresponding support but it may take time with
> > testing involved.
> >
> > > Worst case
> > > scenario - split your patch and only merge baremetal update, leaving CI at
> > > 10.3 for now for external-arm-toolchain...
> >
> > We should go ahead with this strategy.
>
> I would very much like both of the toolchains at the same version, but
> I understand this might not be possible with release schedules being
> what they are and the need for testing. While waiting for this, we'll
> stick with the split.
Now I am done with the changes involved to support 11.2 binary
toolchain along with testing. Here [1] [2] are corresponding patches.
[1] https://lists.yoctoproject.org/g/meta-arm/message/3322
[2] https://lists.yoctoproject.org/g/meta-arm/message/3323
>
> I appreciate everyone trying to get this done and I'm happy to help in
> any way I can.
Thanks for your offer, really appreciated.
-Sumit
>
> Thanks,
> Jon
>
> >
> > -Sumit
> >
> > >
> > >
> > > PS. it appears Patchwork is missing some patches, specifically both Sumit's
> > > first version to update #1, as well as your second re-spin for the same.
> > > Wonder if it's due to the patch size...
> > >
> > > --
> > > Denys
> > >
> > >
> > > > > > diff --git a/ci/get-binary-toolchains b/ci/get-binary-toolchains
> > > > > > index 838342a1c572..394ce4131b9f 100755
> > > > > > --- a/ci/get-binary-toolchains
> > > > > > +++ b/ci/get-binary-toolchains
> > > > > > @@ -2,7 +2,7 @@
> > > > > > set -u
> > > > > >
> > > > > > HOST_ARCH=$(uname -m)
> > > > > > -VER="10.3-2021.07"
> > > > > > +VER="11.2-2022.02"
> > > > > >
> > > > > > DOWNLOAD_DIR=$1
> > > > > > TOOLCHAIN_DIR=$2
> > > > > > @@ -15,18 +15,21 @@ if [ $HOST_ARCH = "aarch64" ]; then
> > > > > > #AArch64 Linux hosted cross compilers
> > > > > >
> > > > > > #AArch32 target with hard float (arm-none-linux-gnueabihf)
> > > > > > - wget -P $DOWNLOAD_DIR -nc
> > > > > > https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > > > > + wget -P $DOWNLOAD_DIR -nc
> > > > > > https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > > > > +
> > > > > > + #AArch64 GNU/Linux target (aarch64-none-linux-gnu)
> > > > > > + wget -P $DOWNLOAD_DIR -nc
> > > > > > https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > > > > > elif [ $HOST_ARCH = "x86_64" ]; then
> > > > > > #x86_64 Linux hosted cross compilers
> > > > > >
> > > > > > #AArch32 target with hard float (arm-linux-none-gnueabihf)
> > > > > > - wget -P $DOWNLOAD_DIR -nc
> > > > > > https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > > > > + wget -P $DOWNLOAD_DIR -nc
> > > > > > https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > > > >
> > > > > > #AArch64 GNU/Linux target (aarch64-none-linux-gnu)
> > > > > > - wget -P $DOWNLOAD_DIR -nc
> > > > > > https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > > > > > + wget -P $DOWNLOAD_DIR -nc
> > > > > > https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > > > > >
> > > > > > #AArch64 GNU/Linux target (aarch64_be-none-linux-gnu)
> > > > > > - wget -P $DOWNLOAD_DIR -nc
> > > > > > https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
> > > > > > + wget -P $DOWNLOAD_DIR -nc
> > > > > > https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
> > > > > > else
> > > > > > echo "ERROR - Unknown build arch of $HOST_ARCH"
> > > > > > exit 1
> > > > > > diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> > > > > > b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > > > > > similarity index 61%
> > > > > > rename from meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> > > > > > rename to meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > > > > > index 02b5b43bdd7e..a9e6b581a50e 100644
> > > > > > --- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> > > > > > +++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > > > > > @@ -9,16 +9,16 @@ SUMMARY = "Baremetal GCC for Aarch64 processors"
> > > > > > LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
> > > > > >
> > > > > > LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
> > > > > > -LIC_FILES_CHKSUM:aarch64 =
> > > > > > "file://share/doc/gcc/Copying.html;md5=d06ace534ed0851debcb7140c5b5116e"
> > > > > > -LIC_FILES_CHKSUM:x86-64 =
> > > > > > "file://share/doc/gcc/Copying.html;md5=e4bcb5bee0c4a50c06704b0b73fcbe0c"
> > > > > > +LIC_FILES_CHKSUM:aarch64 =
> > > > > > "file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
> > > > > > +LIC_FILES_CHKSUM:x86-64 =
> > > > > > "file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
> > > > > >
> > > > > > -PROVIDES = "virtual/aarch64-none-elf-gcc"
> > > > > > +PROVIDES = "virtual/${BINNAME}-gcc"
> > > > > >
> > > > > > -SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-a/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
> > > > > > -SRC_URI[gnu-a-aarch64.sha256sum] =
> > > > > > "768a5db41d93f48838f1c4bfeae26930df2320c09f0dfa798321082fb937955f"
> > > > > > -SRC_URI[gnu-a-x86_64.sha256sum] =
> > > > > > "6f74b1ee370caeb716688d2e467e5b44727fdc0ed56023fe5c72c0620019ecef"
> > > > > > +SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
> > > > > > +SRC_URI[gnu-a-aarch64.sha256sum] =
> > > > > > "3b15725545a0211a17b63e72d4f10241f7ffbe7ce94cb9612590ceacde16992c"
> > > > > > +SRC_URI[gnu-a-x86_64.sha256sum] =
> > > > > > "b0a015a9e8cbb44ed2fe5ad755a7a7ae254d54f93df3bf47378485b0ba8b828b"
> > > > > >
> > > > > > S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
> > > > > >
> > > > > > -UPSTREAM_CHECK_URI =
> > > > > > "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-a/downloads"
> > > > > > +UPSTREAM_CHECK_URI =
> > > > > > "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
> > > > > > UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
> > > > > > diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > > > > > b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > > > > > similarity index 35%
> > > > > > rename from meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > > > > > rename to meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > > > > > index ad7e81617d74..930bb5261be8 100644
> > > > > > --- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > > > > > +++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > > > > > @@ -8,13 +8,17 @@ COMPATIBLE_HOST = "(x86_64|aarch64).*-linux"
> > > > > > SUMMARY = "Baremetal GCC for ARM-R and ARM-M processors"
> > > > > > LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
> > > > > >
> > > > > > -LIC_FILES_CHKSUM =
> > > > > > "file://share/doc/gcc-arm-none-eabi/license.txt;md5=c18349634b740b7b95f2c2159af888f5"
> > > > > > +LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
> > > > > > +LIC_FILES_CHKSUM:aarch64 =
> > > > > > "file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
> > > > > > +LIC_FILES_CHKSUM:x86-64 =
> > > > > > "file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
> > > > > >
> > > > > > -PROVIDES = "virtual/arm-none-eabi-gcc"
> > > > > > +PROVIDES = "virtual/${BINNAME}-gcc"
> > > > > >
> > > > > > -SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-rm/${PV}/${BP}-${HOST_ARCH}-linux.tar.bz2;name=gnu-rm-${HOST_ARCH}"
> > > > > > -SRC_URI[gnu-rm-aarch64.sha256sum] =
> > > > > > "f605b5f23ca898e9b8b665be208510a54a6e9fdd0fa5bfc9592002f6e7431208"
> > > > > > -SRC_URI[gnu-rm-x86_64.sha256sum] =
> > > > > > "97dbb4f019ad1650b732faffcc881689cedc14e2b7ee863d390e0a41ef16c9a3"
> > > > > > +SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-rm-${HOST_ARCH}"
> > > > > > +SRC_URI[gnu-rm-aarch64.sha256sum] =
> > > > > > "dd861d188f4061a7ef3857c948376f84ef1dfb88a32aded7c336ed7e47e60970"
> > > > > > +SRC_URI[gnu-rm-x86_64.sha256sum] =
> > > > > > "8c5acd5ae567c0100245b0556941c237369f210bceb196edfe5a2e7532c60326"
> > > > > >
> > > > > > -UPSTREAM_CHECK_URI =
> > > > > > "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-rm/downloads"
> > > > > > -UPSTREAM_CHECK_REGEX = "${BPN}-(?P<pver>.+)-${HOST_ARCH}-linux\.tar\.\w+"
> > > > > > +S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
> > > > > > +
> > > > > > +UPSTREAM_CHECK_URI =
> > > > > > "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
> > > > > > +UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > On Tue, Mar 22, 2022 at 1:30 PM Denys Dmytriyenko <denis@denix.org> wrote:
> > > > > > >
> > > > > > > On Tue, Mar 22, 2022 at 09:43:27AM -0400, Jon Mason wrote:
> > > > > > > > There is a new and unified version of the toolchains (no longer the RM
> > > > > > > > and A toolchain split). Update the paths and SHAs to reflect the new
> > > > > > > > location.
> > > > > > > >
> > > > > > > > NOTE: with this change, the binary toolchains do not appear to work
> > > > > > > >
> > > > > > > > Signed-off-by: Jon Mason <jon.mason@arm.com>
> > > > > > > > ---
> > > > > > > > ci/get-binary-toolchains | 13 ++++++----
> > > > > > > > ...b => gcc-aarch64-none-elf_11.2-2022.02.bb} | 14 +++++------
> > > > > > > > .../gcc-arm-none-eabi_10.3-2021.10.bb | 20 ----------------
> > > > > > > > .../gcc-arm-none-eabi_11.2-2022.02.bb | 24 +++++++++++++++++++
> > > > > > > > 4 files changed, 39 insertions(+), 32 deletions(-)
> > > > > > > > rename meta-arm-toolchain/recipes-devtools/external-arm-toolchain/{gcc-aarch64-none-elf_10.3-2021.07.bb => gcc-aarch64-none-elf_11.2-2022.02.bb} (61%)
> > > > > > > > delete mode 100644 meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > > > > > > > create mode 100644 meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > > > > > >
> > > > > > > Any chance to lower the similarity threshold to make it a diff for review,
> > > > > > > instead of remove/add?
> > > > > > >
> > > > > > >
> > > > > > > > diff --git a/ci/get-binary-toolchains b/ci/get-binary-toolchains
> > > > > > > > index 838342a1c572..394ce4131b9f 100755
> > > > > > > > --- a/ci/get-binary-toolchains
> > > > > > > > +++ b/ci/get-binary-toolchains
> > > > > > > > @@ -2,7 +2,7 @@
> > > > > > > > set -u
> > > > > > > >
> > > > > > > > HOST_ARCH=$(uname -m)
> > > > > > > > -VER="10.3-2021.07"
> > > > > > > > +VER="11.2-2022.02"
> > > > > > > >
> > > > > > > > DOWNLOAD_DIR=$1
> > > > > > > > TOOLCHAIN_DIR=$2
> > > > > > > > @@ -15,18 +15,21 @@ if [ $HOST_ARCH = "aarch64" ]; then
> > > > > > > > #AArch64 Linux hosted cross compilers
> > > > > > > >
> > > > > > > > #AArch32 target with hard float (arm-none-linux-gnueabihf)
> > > > > > > > - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > > > > > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > > > > > > +
> > > > > > > > + #AArch64 GNU/Linux target (aarch64-none-linux-gnu)
> > > > > > > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > > > > > > > elif [ $HOST_ARCH = "x86_64" ]; then
> > > > > > > > #x86_64 Linux hosted cross compilers
> > > > > > > >
> > > > > > > > #AArch32 target with hard float (arm-linux-none-gnueabihf)
> > > > > > > > - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > > > > > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
> > > > > > > >
> > > > > > > > #AArch64 GNU/Linux target (aarch64-none-linux-gnu)
> > > > > > > > - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > > > > > > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
> > > > > > > >
> > > > > > > > #AArch64 GNU/Linux target (aarch64_be-none-linux-gnu)
> > > > > > > > - wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
> > > > > > > > + wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
> > > > > > > > else
> > > > > > > > echo "ERROR - Unknown build arch of $HOST_ARCH"
> > > > > > > > exit 1
> > > > > > > > diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > > > > > > > similarity index 61%
> > > > > > > > rename from meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> > > > > > > > rename to meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > > > > > > > index 02b5b43bdd7e..a9e6b581a50e 100644
> > > > > > > > --- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_10.3-2021.07.bb
> > > > > > > > +++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-aarch64-none-elf_11.2-2022.02.bb
> > > > > > > > @@ -9,16 +9,16 @@ SUMMARY = "Baremetal GCC for Aarch64 processors"
> > > > > > > > LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
> > > > > > > >
> > > > > > > > LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
> > > > > > > > -LIC_FILES_CHKSUM:aarch64 = "file://share/doc/gcc/Copying.html;md5=d06ace534ed0851debcb7140c5b5116e"
> > > > > > > > -LIC_FILES_CHKSUM:x86-64 = "file://share/doc/gcc/Copying.html;md5=e4bcb5bee0c4a50c06704b0b73fcbe0c"
> > > > > > > > +LIC_FILES_CHKSUM:aarch64 = "file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
> > > > > > > > +LIC_FILES_CHKSUM:x86-64 = "file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
> > > > > > > >
> > > > > > > > -PROVIDES = "virtual/aarch64-none-elf-gcc"
> > > > > > > > +PROVIDES = "virtual/${BINNAME}-gcc"
> > > > > > > >
> > > > > > > > -SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-a/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
> > > > > > > > -SRC_URI[gnu-a-aarch64.sha256sum] = "768a5db41d93f48838f1c4bfeae26930df2320c09f0dfa798321082fb937955f"
> > > > > > > > -SRC_URI[gnu-a-x86_64.sha256sum] = "6f74b1ee370caeb716688d2e467e5b44727fdc0ed56023fe5c72c0620019ecef"
> > > > > > > > +SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-a-${HOST_ARCH}"
> > > > > > > > +SRC_URI[gnu-a-aarch64.sha256sum] = "3b15725545a0211a17b63e72d4f10241f7ffbe7ce94cb9612590ceacde16992c"
> > > > > > > > +SRC_URI[gnu-a-x86_64.sha256sum] = "b0a015a9e8cbb44ed2fe5ad755a7a7ae254d54f93df3bf47378485b0ba8b828b"
> > > > > > > >
> > > > > > > > S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
> > > > > > > >
> > > > > > > > -UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-a/downloads"
> > > > > > > > +UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
> > > > > > > > UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
> > > > > > > > diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > > > > > > > deleted file mode 100644
> > > > > > > > index ad7e81617d74..000000000000
> > > > > > > > --- a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_10.3-2021.10.bb
> > > > > > > > +++ /dev/null
> > > > > > > > @@ -1,20 +0,0 @@
> > > > > > > > -# Copyright (C) 2019 Garmin Ltd. or its subsidiaries
> > > > > > > > -# Released under the MIT license (see COPYING.MIT for the terms)
> > > > > > > > -
> > > > > > > > -require arm-binary-toolchain.inc
> > > > > > > > -
> > > > > > > > -COMPATIBLE_HOST = "(x86_64|aarch64).*-linux"
> > > > > > > > -
> > > > > > > > -SUMMARY = "Baremetal GCC for ARM-R and ARM-M processors"
> > > > > > > > -LICENSE = "GPL-3.0-with-GCC-exception & GPL-3.0-only"
> > > > > > > > -
> > > > > > > > -LIC_FILES_CHKSUM = "file://share/doc/gcc-arm-none-eabi/license.txt;md5=c18349634b740b7b95f2c2159af888f5"
> > > > > > > > -
> > > > > > > > -PROVIDES = "virtual/arm-none-eabi-gcc"
> > > > > > > > -
> > > > > > > > -SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu-rm/${PV}/${BP}-${HOST_ARCH}-linux.tar.bz2;name=gnu-rm-${HOST_ARCH}"
> > > > > > > > -SRC_URI[gnu-rm-aarch64.sha256sum] = "f605b5f23ca898e9b8b665be208510a54a6e9fdd0fa5bfc9592002f6e7431208"
> > > > > > > > -SRC_URI[gnu-rm-x86_64.sha256sum] = "97dbb4f019ad1650b732faffcc881689cedc14e2b7ee863d390e0a41ef16c9a3"
> > > > > > > > -
> > > > > > > > -UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-rm/downloads"
> > > > > > > > -UPSTREAM_CHECK_REGEX = "${BPN}-(?P<pver>.+)-${HOST_ARCH}-linux\.tar\.\w+"
> > > > > > > > diff --git a/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > > > > > > > new file mode 100644
> > > > > > > > index 000000000000..4e9fe35789f9
> > > > > > > > --- /dev/null
> > > > > > > > +++ b/meta-arm-toolchain/recipes-devtools/external-arm-toolchain/gcc-arm-none-eabi_11.2-2022.02.bb
> > > > > > > > @@ -0,0 +1,24 @@
> > > > > > > > +# Copyright (C) 2019 Garmin Ltd. or its subsidiaries
> > > > > > > > +# Released under the MIT license (see COPYING.MIT for the terms)
> > > > > > > > +
> > > > > > > > +require arm-binary-toolchain.inc
> > > > > > > > +
> > > > > > > > +COMPATIBLE_HOST = "(x86_64|aarch64).*-linux"
> > > > > > > > +
> > > > > > > > +SUMMARY = "Baremetal GCC for ARM-R and ARM-M processors"
> > > > > > > > +LICENSE = "GPL-3.0-with-GCC-exception & GPLv3"
> > > > > > > > +
> > > > > > > > +LIC_FILES_CHKSUM = "${@d.getVar(d.expand("LIC_FILES_CHKSUM_${HOST_ARCH}"))}"
> > > > > > > > +LIC_FILES_CHKSUM:aarch64 = "file://share/doc/gcc/Copying.html;md5=be4f8b5ff7319cd54f6c52db5d6f36b0"
> > > > > > > > +LIC_FILES_CHKSUM:x86-64 = "file://share/doc/gcc/Copying.html;md5=1f07179249795891179bb3798bac7887"
> > > > > > > > +
> > > > > > > > +PROVIDES = "virtual/${BINNAME}-gcc"
> > > > > > > > +
> > > > > > > > +SRC_URI = "https://developer.arm.com/-/media/Files/downloads/gnu/${PV}/binrel/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}.tar.xz;name=gnu-rm-${HOST_ARCH}"
> > > > > > > > +SRC_URI[gnu-rm-aarch64.sha256sum] = "dd861d188f4061a7ef3857c948376f84ef1dfb88a32aded7c336ed7e47e60970"
> > > > > > > > +SRC_URI[gnu-rm-x86_64.sha256sum] = "8c5acd5ae567c0100245b0556941c237369f210bceb196edfe5a2e7532c60326"
> > > > > > > > +
> > > > > > > > +S = "${WORKDIR}/gcc-arm-${PV}-${HOST_ARCH}-${BINNAME}"
> > > > > > > > +
> > > > > > > > +UPSTREAM_CHECK_URI = "https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/downloads"
> > > > > > > > +UPSTREAM_CHECK_REGEX = "gcc-arm-(?P<pver>.+)-${HOST_ARCH}-${BINNAME}\.tar\.\w+"
> > > > > > > > --
> > > > > > > > 2.30.2
> >
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2022-04-28 12:36 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-03-22 13:43 [RFC] arm-toolchain: upgrade toolchains to 11.2-2002.02 Jon Mason
2022-03-22 17:30 ` [meta-arm] " Denys Dmytriyenko
2022-03-22 19:20 ` Jon Mason
2022-03-22 19:27 ` Denys Dmytriyenko
2022-03-22 21:08 ` Jon Mason
2022-03-30 20:15 ` Denys Dmytriyenko
2022-04-04 13:44 ` Sumit Garg
2022-04-07 15:34 ` Jon Mason
2022-04-28 12:36 ` Sumit Garg
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.