All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sunil V L <sunilvl@ventanamicro.com>
To: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Cc: Atish Patra <atishp@rivosinc.com>,
	Anup Patel <apatel@ventanamicro.com>,
	Jessica Clarke <jrtc27@jrtc27.com>,
	Abner Chang <abner.chang@hpe.com>,
	linux-efi@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-riscv@lists.infradead.org,
	Palmer Dabbelt <palmer@rivosinc.com>,
	Ilias Apalodimas <ilias.apalodimas@linaro.org>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Ard Biesheuvel <ardb@kernel.org>
Subject: Re: [PATCH 1/1] riscv/efi_stub: Add support for RISCV_EFI_BOOT_PROTOCOL
Date: Thu, 24 Mar 2022 17:46:31 +0530	[thread overview]
Message-ID: <20220324121631.GA39769@sunil-laptop> (raw)
In-Reply-To: <14f87d29-ebc9-51a3-020c-353878bcb1ba@canonical.com>

On Thu, Mar 24, 2022 at 12:46:12PM +0100, Heinrich Schuchardt wrote:
> On 3/24/22 12:25, Sunil V L wrote:
> > This patch adds the support for getting the boot hart ID in
> > Linux EFI stub using RISCV_EFI_BOOT_PROTOCOL. This protocol
> > is preferred method over existing DT based solution since it
> > works irrespective of DT or ACPI.
> > 
> > The specification of the protocol is hosted at:
> > https://github.com/riscv-non-isa/riscv-uefi
> > 
> > Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
> > Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
> 
> This seems to be v3 of the patch. v2 is available in
> https://lore.kernel.org/all/20220303145944.307321-2-sunilvl@ventanamicro.com/
> 
> v3 replaces a message in efi_status_t check_platform_features():
> 
> <+   efi_err("/chosen/boot-hartid missing or invalid!\n");
> >+   efi_err("Failed to get boot hartid!\n");

Yes, that's correct. Sorry I missed the version. I resent the patch with
version and your RB tag added.

Thanks!
Sunil
> 
> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
> 
> > ---
> >   drivers/firmware/efi/libstub/efistub.h    |  7 ++++++
> >   drivers/firmware/efi/libstub/riscv-stub.c | 29 +++++++++++++++++++----
> >   include/linux/efi.h                       |  1 +
> >   3 files changed, 32 insertions(+), 5 deletions(-)
> > 
> > diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h
> > index edb77b0621ea..aced62a0907e 100644
> > --- a/drivers/firmware/efi/libstub/efistub.h
> > +++ b/drivers/firmware/efi/libstub/efistub.h
> > @@ -720,6 +720,13 @@ union efi_tcg2_protocol {
> >   	} mixed_mode;
> >   };
> > +struct riscv_efi_boot_protocol {
> > +	u64 revision;
> > +
> > +	efi_status_t (__efiapi * get_boot_hartid)(struct riscv_efi_boot_protocol *this,
> > +						  size_t *boot_hartid);
> > +};
> > +
> >   typedef union efi_load_file_protocol efi_load_file_protocol_t;
> >   typedef union efi_load_file_protocol efi_load_file2_protocol_t;
> > diff --git a/drivers/firmware/efi/libstub/riscv-stub.c b/drivers/firmware/efi/libstub/riscv-stub.c
> > index 9c460843442f..012504f6f9a4 100644
> > --- a/drivers/firmware/efi/libstub/riscv-stub.c
> > +++ b/drivers/firmware/efi/libstub/riscv-stub.c
> > @@ -23,7 +23,7 @@
> >   typedef void __noreturn (*jump_kernel_func)(unsigned int, unsigned long);
> > -static u32 hartid;
> > +static size_t hartid;
> >   static int get_boot_hartid_from_fdt(void)
> >   {
> > @@ -47,14 +47,33 @@ static int get_boot_hartid_from_fdt(void)
> >   	return 0;
> >   }
> > +static efi_status_t get_boot_hartid_from_efi(void)
> > +{
> > +	efi_guid_t boot_protocol_guid = RISCV_EFI_BOOT_PROTOCOL_GUID;
> > +	efi_status_t status;
> > +	struct riscv_efi_boot_protocol *boot_protocol;
> > +
> > +	status = efi_bs_call(locate_protocol, &boot_protocol_guid, NULL,
> > +			     (void **)&boot_protocol);
> > +	if (status == EFI_SUCCESS) {
> > +		status = efi_call_proto(boot_protocol,
> > +					get_boot_hartid, &hartid);
> > +	}
> > +	return status;
> > +}
> > +
> >   efi_status_t check_platform_features(void)
> >   {
> >   	int ret;
> > +	efi_status_t status;
> > -	ret = get_boot_hartid_from_fdt();
> > -	if (ret) {
> > -		efi_err("/chosen/boot-hartid missing or invalid!\n");
> > -		return EFI_UNSUPPORTED;
> > +	status = get_boot_hartid_from_efi();
> > +	if (status != EFI_SUCCESS) {
> > +		ret = get_boot_hartid_from_fdt();
> > +		if (ret) {
> > +			efi_err("Failed to get boot hartid!\n");
> > +			return EFI_UNSUPPORTED;
> > +		}
> >   	}
> >   	return EFI_SUCCESS;
> >   }
> > diff --git a/include/linux/efi.h b/include/linux/efi.h
> > index ccd4d3f91c98..9822c730207c 100644
> > --- a/include/linux/efi.h
> > +++ b/include/linux/efi.h
> > @@ -380,6 +380,7 @@ void efi_native_runtime_setup(void);
> >   #define EFI_CONSOLE_OUT_DEVICE_GUID		EFI_GUID(0xd3b36f2c, 0xd551, 0x11d4,  0x9a, 0x46, 0x00, 0x90, 0x27, 0x3f, 0xc1, 0x4d)
> >   #define APPLE_PROPERTIES_PROTOCOL_GUID		EFI_GUID(0x91bd12fe, 0xf6c3, 0x44fb,  0xa5, 0xb7, 0x51, 0x22, 0xab, 0x30, 0x3a, 0xe0)
> >   #define EFI_TCG2_PROTOCOL_GUID			EFI_GUID(0x607f766c, 0x7455, 0x42be,  0x93, 0x0b, 0xe4, 0xd7, 0x6d, 0xb2, 0x72, 0x0f)
> > +#define RISCV_EFI_BOOT_PROTOCOL_GUID		EFI_GUID(0xccd15fec, 0x6f73, 0x4eec,  0x83, 0x95, 0x3e, 0x69, 0xe4, 0xb9, 0x40, 0xbf)
> >   #define EFI_LOAD_FILE_PROTOCOL_GUID		EFI_GUID(0x56ec3091, 0x954c, 0x11d2,  0x8e, 0x3f, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b)
> >   #define EFI_LOAD_FILE2_PROTOCOL_GUID		EFI_GUID(0x4006c0c1, 0xfcb3, 0x403e,  0x99, 0x6d, 0x4a, 0x6c, 0x87, 0x24, 0xe0, 0x6d)
> >   #define EFI_RT_PROPERTIES_TABLE_GUID		EFI_GUID(0xeb66918a, 0x7eef, 0x402a,  0x84, 0x2e, 0x93, 0x1d, 0x21, 0xc3, 0x8a, 0xe9)
> 

WARNING: multiple messages have this Message-ID (diff)
From: Sunil V L <sunilvl@ventanamicro.com>
To: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Cc: Atish Patra <atishp@rivosinc.com>,
	Anup Patel <apatel@ventanamicro.com>,
	Jessica Clarke <jrtc27@jrtc27.com>,
	Abner Chang <abner.chang@hpe.com>,
	linux-efi@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-riscv@lists.infradead.org,
	Palmer Dabbelt <palmer@rivosinc.com>,
	Ilias Apalodimas <ilias.apalodimas@linaro.org>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Ard Biesheuvel <ardb@kernel.org>
Subject: Re: [PATCH 1/1] riscv/efi_stub: Add support for RISCV_EFI_BOOT_PROTOCOL
Date: Thu, 24 Mar 2022 17:46:31 +0530	[thread overview]
Message-ID: <20220324121631.GA39769@sunil-laptop> (raw)
In-Reply-To: <14f87d29-ebc9-51a3-020c-353878bcb1ba@canonical.com>

On Thu, Mar 24, 2022 at 12:46:12PM +0100, Heinrich Schuchardt wrote:
> On 3/24/22 12:25, Sunil V L wrote:
> > This patch adds the support for getting the boot hart ID in
> > Linux EFI stub using RISCV_EFI_BOOT_PROTOCOL. This protocol
> > is preferred method over existing DT based solution since it
> > works irrespective of DT or ACPI.
> > 
> > The specification of the protocol is hosted at:
> > https://github.com/riscv-non-isa/riscv-uefi
> > 
> > Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
> > Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
> 
> This seems to be v3 of the patch. v2 is available in
> https://lore.kernel.org/all/20220303145944.307321-2-sunilvl@ventanamicro.com/
> 
> v3 replaces a message in efi_status_t check_platform_features():
> 
> <+   efi_err("/chosen/boot-hartid missing or invalid!\n");
> >+   efi_err("Failed to get boot hartid!\n");

Yes, that's correct. Sorry I missed the version. I resent the patch with
version and your RB tag added.

Thanks!
Sunil
> 
> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
> 
> > ---
> >   drivers/firmware/efi/libstub/efistub.h    |  7 ++++++
> >   drivers/firmware/efi/libstub/riscv-stub.c | 29 +++++++++++++++++++----
> >   include/linux/efi.h                       |  1 +
> >   3 files changed, 32 insertions(+), 5 deletions(-)
> > 
> > diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h
> > index edb77b0621ea..aced62a0907e 100644
> > --- a/drivers/firmware/efi/libstub/efistub.h
> > +++ b/drivers/firmware/efi/libstub/efistub.h
> > @@ -720,6 +720,13 @@ union efi_tcg2_protocol {
> >   	} mixed_mode;
> >   };
> > +struct riscv_efi_boot_protocol {
> > +	u64 revision;
> > +
> > +	efi_status_t (__efiapi * get_boot_hartid)(struct riscv_efi_boot_protocol *this,
> > +						  size_t *boot_hartid);
> > +};
> > +
> >   typedef union efi_load_file_protocol efi_load_file_protocol_t;
> >   typedef union efi_load_file_protocol efi_load_file2_protocol_t;
> > diff --git a/drivers/firmware/efi/libstub/riscv-stub.c b/drivers/firmware/efi/libstub/riscv-stub.c
> > index 9c460843442f..012504f6f9a4 100644
> > --- a/drivers/firmware/efi/libstub/riscv-stub.c
> > +++ b/drivers/firmware/efi/libstub/riscv-stub.c
> > @@ -23,7 +23,7 @@
> >   typedef void __noreturn (*jump_kernel_func)(unsigned int, unsigned long);
> > -static u32 hartid;
> > +static size_t hartid;
> >   static int get_boot_hartid_from_fdt(void)
> >   {
> > @@ -47,14 +47,33 @@ static int get_boot_hartid_from_fdt(void)
> >   	return 0;
> >   }
> > +static efi_status_t get_boot_hartid_from_efi(void)
> > +{
> > +	efi_guid_t boot_protocol_guid = RISCV_EFI_BOOT_PROTOCOL_GUID;
> > +	efi_status_t status;
> > +	struct riscv_efi_boot_protocol *boot_protocol;
> > +
> > +	status = efi_bs_call(locate_protocol, &boot_protocol_guid, NULL,
> > +			     (void **)&boot_protocol);
> > +	if (status == EFI_SUCCESS) {
> > +		status = efi_call_proto(boot_protocol,
> > +					get_boot_hartid, &hartid);
> > +	}
> > +	return status;
> > +}
> > +
> >   efi_status_t check_platform_features(void)
> >   {
> >   	int ret;
> > +	efi_status_t status;
> > -	ret = get_boot_hartid_from_fdt();
> > -	if (ret) {
> > -		efi_err("/chosen/boot-hartid missing or invalid!\n");
> > -		return EFI_UNSUPPORTED;
> > +	status = get_boot_hartid_from_efi();
> > +	if (status != EFI_SUCCESS) {
> > +		ret = get_boot_hartid_from_fdt();
> > +		if (ret) {
> > +			efi_err("Failed to get boot hartid!\n");
> > +			return EFI_UNSUPPORTED;
> > +		}
> >   	}
> >   	return EFI_SUCCESS;
> >   }
> > diff --git a/include/linux/efi.h b/include/linux/efi.h
> > index ccd4d3f91c98..9822c730207c 100644
> > --- a/include/linux/efi.h
> > +++ b/include/linux/efi.h
> > @@ -380,6 +380,7 @@ void efi_native_runtime_setup(void);
> >   #define EFI_CONSOLE_OUT_DEVICE_GUID		EFI_GUID(0xd3b36f2c, 0xd551, 0x11d4,  0x9a, 0x46, 0x00, 0x90, 0x27, 0x3f, 0xc1, 0x4d)
> >   #define APPLE_PROPERTIES_PROTOCOL_GUID		EFI_GUID(0x91bd12fe, 0xf6c3, 0x44fb,  0xa5, 0xb7, 0x51, 0x22, 0xab, 0x30, 0x3a, 0xe0)
> >   #define EFI_TCG2_PROTOCOL_GUID			EFI_GUID(0x607f766c, 0x7455, 0x42be,  0x93, 0x0b, 0xe4, 0xd7, 0x6d, 0xb2, 0x72, 0x0f)
> > +#define RISCV_EFI_BOOT_PROTOCOL_GUID		EFI_GUID(0xccd15fec, 0x6f73, 0x4eec,  0x83, 0x95, 0x3e, 0x69, 0xe4, 0xb9, 0x40, 0xbf)
> >   #define EFI_LOAD_FILE_PROTOCOL_GUID		EFI_GUID(0x56ec3091, 0x954c, 0x11d2,  0x8e, 0x3f, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b)
> >   #define EFI_LOAD_FILE2_PROTOCOL_GUID		EFI_GUID(0x4006c0c1, 0xfcb3, 0x403e,  0x99, 0x6d, 0x4a, 0x6c, 0x87, 0x24, 0xe0, 0x6d)
> >   #define EFI_RT_PROPERTIES_TABLE_GUID		EFI_GUID(0xeb66918a, 0x7eef, 0x402a,  0x84, 0x2e, 0x93, 0x1d, 0x21, 0xc3, 0x8a, 0xe9)
> 

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  reply	other threads:[~2022-03-24 12:16 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-03-24 11:25 [PATCH 0/1] RISCV_EFI_BOOT_PROTOCOL support in linux Sunil V L
2022-03-24 11:25 ` Sunil V L
2022-03-24 11:25 ` [PATCH 1/1] riscv/efi_stub: Add support for RISCV_EFI_BOOT_PROTOCOL Sunil V L
2022-03-24 11:25   ` Sunil V L
2022-03-24 11:46   ` Heinrich Schuchardt
2022-03-24 11:46     ` Heinrich Schuchardt
2022-03-24 12:16     ` Sunil V L [this message]
2022-03-24 12:16       ` Sunil V L

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220324121631.GA39769@sunil-laptop \
    --to=sunilvl@ventanamicro.com \
    --cc=abner.chang@hpe.com \
    --cc=aou@eecs.berkeley.edu \
    --cc=apatel@ventanamicro.com \
    --cc=ardb@kernel.org \
    --cc=atishp@rivosinc.com \
    --cc=heinrich.schuchardt@canonical.com \
    --cc=ilias.apalodimas@linaro.org \
    --cc=jrtc27@jrtc27.com \
    --cc=linux-efi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=palmer@rivosinc.com \
    --cc=paul.walmsley@sifive.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.