* [PATCH v2] phy: mediatek: phy-mtk-mipi-dsi: Simplify with dev_err_probe()
@ 2022-03-28 14:52 ` AngeloGioacchino Del Regno
0 siblings, 0 replies; 10+ messages in thread
From: AngeloGioacchino Del Regno @ 2022-03-28 14:52 UTC (permalink / raw)
To: chunkuang.hu
Cc: p.zabel, chunfeng.yun, kishon, vkoul, matthias.bgg, dri-devel,
linux-mediatek, linux-arm-kernel, linux-phy, linux-kernel,
AngeloGioacchino Del Regno
Use the dev_err_probe() helper to simplify error handling during probe.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
v2: Sorry, v1 was only partial as I have accidentally sent the
wrong patch file. Fixed for v2.
drivers/phy/mediatek/phy-mtk-mipi-dsi.c | 29 +++++++++----------------
1 file changed, 10 insertions(+), 19 deletions(-)
diff --git a/drivers/phy/mediatek/phy-mtk-mipi-dsi.c b/drivers/phy/mediatek/phy-mtk-mipi-dsi.c
index 67b005d5b9e3..28506932bd91 100644
--- a/drivers/phy/mediatek/phy-mtk-mipi-dsi.c
+++ b/drivers/phy/mediatek/phy-mtk-mipi-dsi.c
@@ -154,11 +154,9 @@ static int mtk_mipi_tx_probe(struct platform_device *pdev)
return PTR_ERR(mipi_tx->regs);
ref_clk = devm_clk_get(dev, NULL);
- if (IS_ERR(ref_clk)) {
- ret = PTR_ERR(ref_clk);
- dev_err(dev, "Failed to get reference clock: %d\n", ret);
- return ret;
- }
+ if (IS_ERR(ref_clk))
+ return dev_err_probe(dev, PTR_ERR(ref_clk),
+ "Failed to get reference clock\n");
ret = of_property_read_u32(dev->of_node, "drive-strength-microamp",
&mipi_tx->mipitx_drive);
@@ -178,27 +176,20 @@ static int mtk_mipi_tx_probe(struct platform_device *pdev)
ret = of_property_read_string(dev->of_node, "clock-output-names",
&clk_init.name);
- if (ret < 0) {
- dev_err(dev, "Failed to read clock-output-names: %d\n", ret);
- return ret;
- }
+ if (ret < 0)
+ return dev_err_probe(dev, ret, "Failed to read clock-output-names\n");
clk_init.ops = mipi_tx->driver_data->mipi_tx_clk_ops;
mipi_tx->pll_hw.init = &clk_init;
mipi_tx->pll = devm_clk_register(dev, &mipi_tx->pll_hw);
- if (IS_ERR(mipi_tx->pll)) {
- ret = PTR_ERR(mipi_tx->pll);
- dev_err(dev, "Failed to register PLL: %d\n", ret);
- return ret;
- }
+ if (IS_ERR(mipi_tx->pll))
+ return dev_err_probe(dev, PTR_ERR(mipi_tx->pll), "Failed to register PLL\n");
phy = devm_phy_create(dev, NULL, &mtk_mipi_tx_ops);
- if (IS_ERR(phy)) {
- ret = PTR_ERR(phy);
- dev_err(dev, "Failed to create MIPI D-PHY: %d\n", ret);
- return ret;
- }
+ if (IS_ERR(phy))
+ return dev_err_probe(dev, PTR_ERR(phy), "Failed to create MIPI D-PHY\n");
+
phy_set_drvdata(phy, mipi_tx);
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
--
2.35.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2] phy: mediatek: phy-mtk-mipi-dsi: Simplify with dev_err_probe()
@ 2022-03-28 14:52 ` AngeloGioacchino Del Regno
0 siblings, 0 replies; 10+ messages in thread
From: AngeloGioacchino Del Regno @ 2022-03-28 14:52 UTC (permalink / raw)
To: chunkuang.hu
Cc: p.zabel, chunfeng.yun, kishon, vkoul, matthias.bgg, dri-devel,
linux-mediatek, linux-arm-kernel, linux-phy, linux-kernel,
AngeloGioacchino Del Regno
Use the dev_err_probe() helper to simplify error handling during probe.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
v2: Sorry, v1 was only partial as I have accidentally sent the
wrong patch file. Fixed for v2.
drivers/phy/mediatek/phy-mtk-mipi-dsi.c | 29 +++++++++----------------
1 file changed, 10 insertions(+), 19 deletions(-)
diff --git a/drivers/phy/mediatek/phy-mtk-mipi-dsi.c b/drivers/phy/mediatek/phy-mtk-mipi-dsi.c
index 67b005d5b9e3..28506932bd91 100644
--- a/drivers/phy/mediatek/phy-mtk-mipi-dsi.c
+++ b/drivers/phy/mediatek/phy-mtk-mipi-dsi.c
@@ -154,11 +154,9 @@ static int mtk_mipi_tx_probe(struct platform_device *pdev)
return PTR_ERR(mipi_tx->regs);
ref_clk = devm_clk_get(dev, NULL);
- if (IS_ERR(ref_clk)) {
- ret = PTR_ERR(ref_clk);
- dev_err(dev, "Failed to get reference clock: %d\n", ret);
- return ret;
- }
+ if (IS_ERR(ref_clk))
+ return dev_err_probe(dev, PTR_ERR(ref_clk),
+ "Failed to get reference clock\n");
ret = of_property_read_u32(dev->of_node, "drive-strength-microamp",
&mipi_tx->mipitx_drive);
@@ -178,27 +176,20 @@ static int mtk_mipi_tx_probe(struct platform_device *pdev)
ret = of_property_read_string(dev->of_node, "clock-output-names",
&clk_init.name);
- if (ret < 0) {
- dev_err(dev, "Failed to read clock-output-names: %d\n", ret);
- return ret;
- }
+ if (ret < 0)
+ return dev_err_probe(dev, ret, "Failed to read clock-output-names\n");
clk_init.ops = mipi_tx->driver_data->mipi_tx_clk_ops;
mipi_tx->pll_hw.init = &clk_init;
mipi_tx->pll = devm_clk_register(dev, &mipi_tx->pll_hw);
- if (IS_ERR(mipi_tx->pll)) {
- ret = PTR_ERR(mipi_tx->pll);
- dev_err(dev, "Failed to register PLL: %d\n", ret);
- return ret;
- }
+ if (IS_ERR(mipi_tx->pll))
+ return dev_err_probe(dev, PTR_ERR(mipi_tx->pll), "Failed to register PLL\n");
phy = devm_phy_create(dev, NULL, &mtk_mipi_tx_ops);
- if (IS_ERR(phy)) {
- ret = PTR_ERR(phy);
- dev_err(dev, "Failed to create MIPI D-PHY: %d\n", ret);
- return ret;
- }
+ if (IS_ERR(phy))
+ return dev_err_probe(dev, PTR_ERR(phy), "Failed to create MIPI D-PHY\n");
+
phy_set_drvdata(phy, mipi_tx);
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
--
2.35.1
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2] phy: mediatek: phy-mtk-mipi-dsi: Simplify with dev_err_probe()
@ 2022-03-28 14:52 ` AngeloGioacchino Del Regno
0 siblings, 0 replies; 10+ messages in thread
From: AngeloGioacchino Del Regno @ 2022-03-28 14:52 UTC (permalink / raw)
To: chunkuang.hu
Cc: p.zabel, chunfeng.yun, kishon, vkoul, matthias.bgg, dri-devel,
linux-mediatek, linux-arm-kernel, linux-phy, linux-kernel,
AngeloGioacchino Del Regno
Use the dev_err_probe() helper to simplify error handling during probe.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
v2: Sorry, v1 was only partial as I have accidentally sent the
wrong patch file. Fixed for v2.
drivers/phy/mediatek/phy-mtk-mipi-dsi.c | 29 +++++++++----------------
1 file changed, 10 insertions(+), 19 deletions(-)
diff --git a/drivers/phy/mediatek/phy-mtk-mipi-dsi.c b/drivers/phy/mediatek/phy-mtk-mipi-dsi.c
index 67b005d5b9e3..28506932bd91 100644
--- a/drivers/phy/mediatek/phy-mtk-mipi-dsi.c
+++ b/drivers/phy/mediatek/phy-mtk-mipi-dsi.c
@@ -154,11 +154,9 @@ static int mtk_mipi_tx_probe(struct platform_device *pdev)
return PTR_ERR(mipi_tx->regs);
ref_clk = devm_clk_get(dev, NULL);
- if (IS_ERR(ref_clk)) {
- ret = PTR_ERR(ref_clk);
- dev_err(dev, "Failed to get reference clock: %d\n", ret);
- return ret;
- }
+ if (IS_ERR(ref_clk))
+ return dev_err_probe(dev, PTR_ERR(ref_clk),
+ "Failed to get reference clock\n");
ret = of_property_read_u32(dev->of_node, "drive-strength-microamp",
&mipi_tx->mipitx_drive);
@@ -178,27 +176,20 @@ static int mtk_mipi_tx_probe(struct platform_device *pdev)
ret = of_property_read_string(dev->of_node, "clock-output-names",
&clk_init.name);
- if (ret < 0) {
- dev_err(dev, "Failed to read clock-output-names: %d\n", ret);
- return ret;
- }
+ if (ret < 0)
+ return dev_err_probe(dev, ret, "Failed to read clock-output-names\n");
clk_init.ops = mipi_tx->driver_data->mipi_tx_clk_ops;
mipi_tx->pll_hw.init = &clk_init;
mipi_tx->pll = devm_clk_register(dev, &mipi_tx->pll_hw);
- if (IS_ERR(mipi_tx->pll)) {
- ret = PTR_ERR(mipi_tx->pll);
- dev_err(dev, "Failed to register PLL: %d\n", ret);
- return ret;
- }
+ if (IS_ERR(mipi_tx->pll))
+ return dev_err_probe(dev, PTR_ERR(mipi_tx->pll), "Failed to register PLL\n");
phy = devm_phy_create(dev, NULL, &mtk_mipi_tx_ops);
- if (IS_ERR(phy)) {
- ret = PTR_ERR(phy);
- dev_err(dev, "Failed to create MIPI D-PHY: %d\n", ret);
- return ret;
- }
+ if (IS_ERR(phy))
+ return dev_err_probe(dev, PTR_ERR(phy), "Failed to create MIPI D-PHY\n");
+
phy_set_drvdata(phy, mipi_tx);
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
--
2.35.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2] phy: mediatek: phy-mtk-mipi-dsi: Simplify with dev_err_probe()
@ 2022-03-28 14:52 ` AngeloGioacchino Del Regno
0 siblings, 0 replies; 10+ messages in thread
From: AngeloGioacchino Del Regno @ 2022-03-28 14:52 UTC (permalink / raw)
To: chunkuang.hu
Cc: linux-phy, linux-kernel, dri-devel, kishon, matthias.bgg, vkoul,
linux-mediatek, chunfeng.yun, linux-arm-kernel,
AngeloGioacchino Del Regno
Use the dev_err_probe() helper to simplify error handling during probe.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
v2: Sorry, v1 was only partial as I have accidentally sent the
wrong patch file. Fixed for v2.
drivers/phy/mediatek/phy-mtk-mipi-dsi.c | 29 +++++++++----------------
1 file changed, 10 insertions(+), 19 deletions(-)
diff --git a/drivers/phy/mediatek/phy-mtk-mipi-dsi.c b/drivers/phy/mediatek/phy-mtk-mipi-dsi.c
index 67b005d5b9e3..28506932bd91 100644
--- a/drivers/phy/mediatek/phy-mtk-mipi-dsi.c
+++ b/drivers/phy/mediatek/phy-mtk-mipi-dsi.c
@@ -154,11 +154,9 @@ static int mtk_mipi_tx_probe(struct platform_device *pdev)
return PTR_ERR(mipi_tx->regs);
ref_clk = devm_clk_get(dev, NULL);
- if (IS_ERR(ref_clk)) {
- ret = PTR_ERR(ref_clk);
- dev_err(dev, "Failed to get reference clock: %d\n", ret);
- return ret;
- }
+ if (IS_ERR(ref_clk))
+ return dev_err_probe(dev, PTR_ERR(ref_clk),
+ "Failed to get reference clock\n");
ret = of_property_read_u32(dev->of_node, "drive-strength-microamp",
&mipi_tx->mipitx_drive);
@@ -178,27 +176,20 @@ static int mtk_mipi_tx_probe(struct platform_device *pdev)
ret = of_property_read_string(dev->of_node, "clock-output-names",
&clk_init.name);
- if (ret < 0) {
- dev_err(dev, "Failed to read clock-output-names: %d\n", ret);
- return ret;
- }
+ if (ret < 0)
+ return dev_err_probe(dev, ret, "Failed to read clock-output-names\n");
clk_init.ops = mipi_tx->driver_data->mipi_tx_clk_ops;
mipi_tx->pll_hw.init = &clk_init;
mipi_tx->pll = devm_clk_register(dev, &mipi_tx->pll_hw);
- if (IS_ERR(mipi_tx->pll)) {
- ret = PTR_ERR(mipi_tx->pll);
- dev_err(dev, "Failed to register PLL: %d\n", ret);
- return ret;
- }
+ if (IS_ERR(mipi_tx->pll))
+ return dev_err_probe(dev, PTR_ERR(mipi_tx->pll), "Failed to register PLL\n");
phy = devm_phy_create(dev, NULL, &mtk_mipi_tx_ops);
- if (IS_ERR(phy)) {
- ret = PTR_ERR(phy);
- dev_err(dev, "Failed to create MIPI D-PHY: %d\n", ret);
- return ret;
- }
+ if (IS_ERR(phy))
+ return dev_err_probe(dev, PTR_ERR(phy), "Failed to create MIPI D-PHY\n");
+
phy_set_drvdata(phy, mipi_tx);
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
--
2.35.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2] phy: mediatek: phy-mtk-mipi-dsi: Simplify with dev_err_probe()
@ 2022-03-28 14:52 ` AngeloGioacchino Del Regno
0 siblings, 0 replies; 10+ messages in thread
From: AngeloGioacchino Del Regno @ 2022-03-28 14:52 UTC (permalink / raw)
To: chunkuang.hu
Cc: p.zabel, chunfeng.yun, kishon, vkoul, matthias.bgg, dri-devel,
linux-mediatek, linux-arm-kernel, linux-phy, linux-kernel,
AngeloGioacchino Del Regno
Use the dev_err_probe() helper to simplify error handling during probe.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
v2: Sorry, v1 was only partial as I have accidentally sent the
wrong patch file. Fixed for v2.
drivers/phy/mediatek/phy-mtk-mipi-dsi.c | 29 +++++++++----------------
1 file changed, 10 insertions(+), 19 deletions(-)
diff --git a/drivers/phy/mediatek/phy-mtk-mipi-dsi.c b/drivers/phy/mediatek/phy-mtk-mipi-dsi.c
index 67b005d5b9e3..28506932bd91 100644
--- a/drivers/phy/mediatek/phy-mtk-mipi-dsi.c
+++ b/drivers/phy/mediatek/phy-mtk-mipi-dsi.c
@@ -154,11 +154,9 @@ static int mtk_mipi_tx_probe(struct platform_device *pdev)
return PTR_ERR(mipi_tx->regs);
ref_clk = devm_clk_get(dev, NULL);
- if (IS_ERR(ref_clk)) {
- ret = PTR_ERR(ref_clk);
- dev_err(dev, "Failed to get reference clock: %d\n", ret);
- return ret;
- }
+ if (IS_ERR(ref_clk))
+ return dev_err_probe(dev, PTR_ERR(ref_clk),
+ "Failed to get reference clock\n");
ret = of_property_read_u32(dev->of_node, "drive-strength-microamp",
&mipi_tx->mipitx_drive);
@@ -178,27 +176,20 @@ static int mtk_mipi_tx_probe(struct platform_device *pdev)
ret = of_property_read_string(dev->of_node, "clock-output-names",
&clk_init.name);
- if (ret < 0) {
- dev_err(dev, "Failed to read clock-output-names: %d\n", ret);
- return ret;
- }
+ if (ret < 0)
+ return dev_err_probe(dev, ret, "Failed to read clock-output-names\n");
clk_init.ops = mipi_tx->driver_data->mipi_tx_clk_ops;
mipi_tx->pll_hw.init = &clk_init;
mipi_tx->pll = devm_clk_register(dev, &mipi_tx->pll_hw);
- if (IS_ERR(mipi_tx->pll)) {
- ret = PTR_ERR(mipi_tx->pll);
- dev_err(dev, "Failed to register PLL: %d\n", ret);
- return ret;
- }
+ if (IS_ERR(mipi_tx->pll))
+ return dev_err_probe(dev, PTR_ERR(mipi_tx->pll), "Failed to register PLL\n");
phy = devm_phy_create(dev, NULL, &mtk_mipi_tx_ops);
- if (IS_ERR(phy)) {
- ret = PTR_ERR(phy);
- dev_err(dev, "Failed to create MIPI D-PHY: %d\n", ret);
- return ret;
- }
+ if (IS_ERR(phy))
+ return dev_err_probe(dev, PTR_ERR(phy), "Failed to create MIPI D-PHY\n");
+
phy_set_drvdata(phy, mipi_tx);
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
--
2.35.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH v2] phy: mediatek: phy-mtk-mipi-dsi: Simplify with dev_err_probe()
2022-03-28 14:52 ` AngeloGioacchino Del Regno
` (2 preceding siblings ...)
(?)
@ 2022-04-13 7:49 ` Vinod Koul
-1 siblings, 0 replies; 10+ messages in thread
From: Vinod Koul @ 2022-04-13 7:49 UTC (permalink / raw)
To: AngeloGioacchino Del Regno
Cc: chunkuang.hu, p.zabel, chunfeng.yun, kishon, matthias.bgg,
dri-devel, linux-mediatek, linux-arm-kernel, linux-phy,
linux-kernel
On 28-03-22, 16:52, AngeloGioacchino Del Regno wrote:
> Use the dev_err_probe() helper to simplify error handling during probe.
Applied, thanks
--
~Vinod
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2] phy: mediatek: phy-mtk-mipi-dsi: Simplify with dev_err_probe()
@ 2022-04-13 7:49 ` Vinod Koul
0 siblings, 0 replies; 10+ messages in thread
From: Vinod Koul @ 2022-04-13 7:49 UTC (permalink / raw)
To: AngeloGioacchino Del Regno
Cc: chunkuang.hu, p.zabel, chunfeng.yun, kishon, matthias.bgg,
dri-devel, linux-mediatek, linux-arm-kernel, linux-phy,
linux-kernel
On 28-03-22, 16:52, AngeloGioacchino Del Regno wrote:
> Use the dev_err_probe() helper to simplify error handling during probe.
Applied, thanks
--
~Vinod
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2] phy: mediatek: phy-mtk-mipi-dsi: Simplify with dev_err_probe()
@ 2022-04-13 7:49 ` Vinod Koul
0 siblings, 0 replies; 10+ messages in thread
From: Vinod Koul @ 2022-04-13 7:49 UTC (permalink / raw)
To: AngeloGioacchino Del Regno
Cc: chunkuang.hu, linux-phy, linux-kernel, dri-devel, kishon,
matthias.bgg, linux-mediatek, chunfeng.yun, linux-arm-kernel
On 28-03-22, 16:52, AngeloGioacchino Del Regno wrote:
> Use the dev_err_probe() helper to simplify error handling during probe.
Applied, thanks
--
~Vinod
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2] phy: mediatek: phy-mtk-mipi-dsi: Simplify with dev_err_probe()
@ 2022-04-13 7:49 ` Vinod Koul
0 siblings, 0 replies; 10+ messages in thread
From: Vinod Koul @ 2022-04-13 7:49 UTC (permalink / raw)
To: AngeloGioacchino Del Regno
Cc: chunkuang.hu, p.zabel, chunfeng.yun, kishon, matthias.bgg,
dri-devel, linux-mediatek, linux-arm-kernel, linux-phy,
linux-kernel
On 28-03-22, 16:52, AngeloGioacchino Del Regno wrote:
> Use the dev_err_probe() helper to simplify error handling during probe.
Applied, thanks
--
~Vinod
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2] phy: mediatek: phy-mtk-mipi-dsi: Simplify with dev_err_probe()
@ 2022-04-13 7:49 ` Vinod Koul
0 siblings, 0 replies; 10+ messages in thread
From: Vinod Koul @ 2022-04-13 7:49 UTC (permalink / raw)
To: AngeloGioacchino Del Regno
Cc: chunkuang.hu, p.zabel, chunfeng.yun, kishon, matthias.bgg,
dri-devel, linux-mediatek, linux-arm-kernel, linux-phy,
linux-kernel
On 28-03-22, 16:52, AngeloGioacchino Del Regno wrote:
> Use the dev_err_probe() helper to simplify error handling during probe.
Applied, thanks
--
~Vinod
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2022-04-13 7:50 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-03-28 14:52 [PATCH v2] phy: mediatek: phy-mtk-mipi-dsi: Simplify with dev_err_probe() AngeloGioacchino Del Regno
2022-03-28 14:52 ` AngeloGioacchino Del Regno
2022-03-28 14:52 ` AngeloGioacchino Del Regno
2022-03-28 14:52 ` AngeloGioacchino Del Regno
2022-03-28 14:52 ` AngeloGioacchino Del Regno
2022-04-13 7:49 ` Vinod Koul
2022-04-13 7:49 ` Vinod Koul
2022-04-13 7:49 ` Vinod Koul
2022-04-13 7:49 ` Vinod Koul
2022-04-13 7:49 ` Vinod Koul
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.