[PATCH v6 00/11] drm/bridge: tc358767: Add DSI-to-DPI mode support

[PATCH v6 00/11] drm/bridge: tc358767: Add DSI-to-DPI mode support

[Marek Vasut]

The TC358767/TC358867/TC9595 are all capable of operating in multiple
modes, DPI-to-(e)DP, DSI-to-(e)DP, DSI-to-DPI. Clean up the driver,
switch to atomic ops, and add support for the DSI-to-DPI mode in
addition to already supported DPI-to-(e)DP mode.

Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org

Marek Vasut (11):
  dt-bindings: display: bridge: tc358867: Document DPI output support
  dt-bindings: display: bridge: tc358867: Document DSI data-lanes
    property
  drm/bridge: tc358767: Change tc_ prefix to tc_edp_ for (e)DP specific
    functions
  drm/bridge: tc358767: Convert to atomic ops
  drm/bridge: tc358767: Implement atomic_check callback
  drm/bridge: tc358767: Move (e)DP bridge endpoint parsing into
    dedicated function
  drm/bridge: tc358767: Wrap (e)DP aux I2C registration into
    tc_aux_link_setup()
  drm/bridge: tc358767: Move bridge ops setup into
    tc_probe_edp_bridge_endpoint()
  drm/bridge: tc358767: Detect bridge mode from connected endpoints in
    DT
  drm/bridge: tc358767: Split tc_set_video_mode() into common and (e)DP
    part
  drm/bridge: tc358767: Add DSI-to-DPI mode support

 .../display/bridge/toshiba,tc358767.yaml      |  22 +-
 drivers/gpu/drm/bridge/Kconfig                |   1 +
 drivers/gpu/drm/bridge/tc358767.c             | 583 +++++++++++++++---
 3 files changed, 530 insertions(+), 76 deletions(-)

-- 
2.35.1

[PATCH v6 01/11] dt-bindings: display: bridge: tc358867: Document DPI output support

[Marek Vasut]

The TC358767/TC358867/TC9595 are all capable of operating in multiple
modes, DPI-to-(e)DP, DSI-to-(e)DP, DSI-to-DPI. Document support for the
DPI output port, which can now be connected both as input and output.

Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org
---
V2: - Rebase on next-20220217
V3: - No change
V4: - Add AB by Rob, RB/TB by Lucas
V5: - No change
V6: - No change
---
 .../devicetree/bindings/display/bridge/toshiba,tc358767.yaml  | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
index f1541cc05297..5cfda6f2ba69 100644
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
@@ -61,8 +61,8 @@ properties:
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
         description: |
-            DPI input port. The remote endpoint phandle should be a
-            reference to a valid DPI output endpoint node
+            DPI input/output port. The remote endpoint phandle should be a
+            reference to a valid DPI output or input endpoint node.
 
       port@2:
         $ref: /schemas/graph.yaml#/properties/port
-- 
2.35.1

[PATCH v6 01/11] dt-bindings: display: bridge: tc358867: Document DPI output support

[Marek Vasut]

The TC358767/TC358867/TC9595 are all capable of operating in multiple
modes, DPI-to-(e)DP, DSI-to-(e)DP, DSI-to-DPI. Document support for the
DPI output port, which can now be connected both as input and output.

Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org
---
V2: - Rebase on next-20220217
V3: - No change
V4: - Add AB by Rob, RB/TB by Lucas
V5: - No change
V6: - No change
---
 .../devicetree/bindings/display/bridge/toshiba,tc358767.yaml  | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
index f1541cc05297..5cfda6f2ba69 100644
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
@@ -61,8 +61,8 @@ properties:
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
         description: |
-            DPI input port. The remote endpoint phandle should be a
-            reference to a valid DPI output endpoint node
+            DPI input/output port. The remote endpoint phandle should be a
+            reference to a valid DPI output or input endpoint node.
 
       port@2:
         $ref: /schemas/graph.yaml#/properties/port
-- 
2.35.1

[PATCH v6 02/11] dt-bindings: display: bridge: tc358867: Document DSI data-lanes property

It is necessary to specify the number of connected/used DSI data lanes when
using the DSI input port of this bridge. Document the 'data-lanes' property
of the DSI input port.

Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org
---
V3: - New patch
V4: - Add RB by Rob, AB/TB by Lucas
V5: - No change
V6: - No change
---
 .../display/bridge/toshiba,tc358767.yaml       | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
index 5cfda6f2ba69..ed280053ec62 100644
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
@@ -53,11 +53,27 @@ properties:
 
     properties:
       port@0:
-        $ref: /schemas/graph.yaml#/properties/port
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
         description: |
             DSI input port. The remote endpoint phandle should be a
             reference to a valid DSI output endpoint node
 
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description: array of physical DSI data lane indexes.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
         description: |
-- 
2.35.1

[PATCH v6 02/11] dt-bindings: display: bridge: tc358867: Document DSI data-lanes property

[Marek Vasut]

It is necessary to specify the number of connected/used DSI data lanes when
using the DSI input port of this bridge. Document the 'data-lanes' property
of the DSI input port.

Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org
---
V3: - New patch
V4: - Add RB by Rob, AB/TB by Lucas
V5: - No change
V6: - No change
---
 .../display/bridge/toshiba,tc358767.yaml       | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
index 5cfda6f2ba69..ed280053ec62 100644
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
@@ -53,11 +53,27 @@ properties:
 
     properties:
       port@0:
-        $ref: /schemas/graph.yaml#/properties/port
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
         description: |
             DSI input port. The remote endpoint phandle should be a
             reference to a valid DSI output endpoint node
 
+        properties:
+          endpoint:
+            $ref: /schemas/media/video-interfaces.yaml#
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                description: array of physical DSI data lane indexes.
+                minItems: 1
+                items:
+                  - const: 1
+                  - const: 2
+                  - const: 3
+                  - const: 4
+
       port@1:
         $ref: /schemas/graph.yaml#/properties/port
         description: |
-- 
2.35.1

[PATCH v6 03/11] drm/bridge: tc358767: Change tc_ prefix to tc_edp_ for (e)DP specific functions

[Marek Vasut]

These functions are specific to (e)DP output initialization and
operation, add specific tc_edp_ prefix to those functions to
discern them from DPI output functions that will be added later
in this series. No functional change.

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
---
V2: - New patch
V3: - Add RB from Lucas
    - Rename tc_bridge_funcs to tc_edp_bridge_funcs
V4: - Add TB from Lucas
V5: - No change
V6: - No change
---
 drivers/gpu/drm/bridge/tc358767.c | 39 ++++++++++++++++---------------
 1 file changed, 20 insertions(+), 19 deletions(-)

diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index c23e0abc65e8..23e0280f484d 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -1164,7 +1164,7 @@ static int tc_main_link_disable(struct tc_data *tc)
 	return regmap_write(tc->regmap, DP0CTL, 0);
 }
 
-static int tc_stream_enable(struct tc_data *tc)
+static int tc_edp_stream_enable(struct tc_data *tc)
 {
 	int ret;
 	u32 value;
@@ -1219,7 +1219,7 @@ static int tc_stream_enable(struct tc_data *tc)
 	return 0;
 }
 
-static int tc_stream_disable(struct tc_data *tc)
+static int tc_edp_stream_disable(struct tc_data *tc)
 {
 	int ret;
 
@@ -1234,7 +1234,7 @@ static int tc_stream_disable(struct tc_data *tc)
 	return 0;
 }
 
-static void tc_bridge_enable(struct drm_bridge *bridge)
+static void tc_edp_bridge_enable(struct drm_bridge *bridge)
 {
 	struct tc_data *tc = bridge_to_tc(bridge);
 	int ret;
@@ -1251,7 +1251,7 @@ static void tc_bridge_enable(struct drm_bridge *bridge)
 		return;
 	}
 
-	ret = tc_stream_enable(tc);
+	ret = tc_edp_stream_enable(tc);
 	if (ret < 0) {
 		dev_err(tc->dev, "main link stream start error: %d\n", ret);
 		tc_main_link_disable(tc);
@@ -1259,12 +1259,12 @@ static void tc_bridge_enable(struct drm_bridge *bridge)
 	}
 }
 
-static void tc_bridge_disable(struct drm_bridge *bridge)
+static void tc_edp_bridge_disable(struct drm_bridge *bridge)
 {
 	struct tc_data *tc = bridge_to_tc(bridge);
 	int ret;
 
-	ret = tc_stream_disable(tc);
+	ret = tc_edp_stream_disable(tc);
 	if (ret < 0)
 		dev_err(tc->dev, "main link stream stop error: %d\n", ret);
 
@@ -1285,9 +1285,10 @@ static bool tc_bridge_mode_fixup(struct drm_bridge *bridge,
 	return true;
 }
 
-static enum drm_mode_status tc_mode_valid(struct drm_bridge *bridge,
-					  const struct drm_display_info *info,
-					  const struct drm_display_mode *mode)
+static enum drm_mode_status
+tc_edp_mode_valid(struct drm_bridge *bridge,
+		  const struct drm_display_info *info,
+		  const struct drm_display_mode *mode)
 {
 	struct tc_data *tc = bridge_to_tc(bridge);
 	u32 req, avail;
@@ -1395,8 +1396,8 @@ static const struct drm_connector_funcs tc_connector_funcs = {
 	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
 };
 
-static int tc_bridge_attach(struct drm_bridge *bridge,
-			    enum drm_bridge_attach_flags flags)
+static int tc_edp_bridge_attach(struct drm_bridge *bridge,
+				enum drm_bridge_attach_flags flags)
 {
 	u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24;
 	struct tc_data *tc = bridge_to_tc(bridge);
@@ -1448,18 +1449,18 @@ static int tc_bridge_attach(struct drm_bridge *bridge,
 	return ret;
 }
 
-static void tc_bridge_detach(struct drm_bridge *bridge)
+static void tc_edp_bridge_detach(struct drm_bridge *bridge)
 {
 	drm_dp_aux_unregister(&bridge_to_tc(bridge)->aux);
 }
 
-static const struct drm_bridge_funcs tc_bridge_funcs = {
-	.attach = tc_bridge_attach,
-	.detach = tc_bridge_detach,
-	.mode_valid = tc_mode_valid,
+static const struct drm_bridge_funcs tc_edp_bridge_funcs = {
+	.attach = tc_edp_bridge_attach,
+	.detach = tc_edp_bridge_detach,
+	.mode_valid = tc_edp_mode_valid,
 	.mode_set = tc_bridge_mode_set,
-	.enable = tc_bridge_enable,
-	.disable = tc_bridge_disable,
+	.enable = tc_edp_bridge_enable,
+	.disable = tc_edp_bridge_disable,
 	.mode_fixup = tc_bridge_mode_fixup,
 	.detect = tc_bridge_detect,
 	.get_edid = tc_get_edid,
@@ -1696,7 +1697,7 @@ static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	tc->aux.transfer = tc_aux_transfer;
 	drm_dp_aux_init(&tc->aux);
 
-	tc->bridge.funcs = &tc_bridge_funcs;
+	tc->bridge.funcs = &tc_edp_bridge_funcs;
 	if (tc->hpd_pin >= 0)
 		tc->bridge.ops |= DRM_BRIDGE_OP_DETECT;
 	tc->bridge.ops |= DRM_BRIDGE_OP_EDID;
-- 
2.35.1

[PATCH v6 04/11] drm/bridge: tc358767: Convert to atomic ops

[Marek Vasut]

Use the atomic version of the enable/disable operations to continue the
transition to the atomic API. This will be needed to access the mode
from the atomic state.

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
---
V2: - New patch
V3: - Add RB from Lucas
V4: - Add TB from Lucas
V5: - No change
V6: - No change
---
 drivers/gpu/drm/bridge/tc358767.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index 23e0280f484d..f88d8e616f7f 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -1234,7 +1234,9 @@ static int tc_edp_stream_disable(struct tc_data *tc)
 	return 0;
 }
 
-static void tc_edp_bridge_enable(struct drm_bridge *bridge)
+static void
+tc_edp_bridge_atomic_enable(struct drm_bridge *bridge,
+			    struct drm_bridge_state *old_bridge_state)
 {
 	struct tc_data *tc = bridge_to_tc(bridge);
 	int ret;
@@ -1259,7 +1261,9 @@ static void tc_edp_bridge_enable(struct drm_bridge *bridge)
 	}
 }
 
-static void tc_edp_bridge_disable(struct drm_bridge *bridge)
+static void
+tc_edp_bridge_atomic_disable(struct drm_bridge *bridge,
+			     struct drm_bridge_state *old_bridge_state)
 {
 	struct tc_data *tc = bridge_to_tc(bridge);
 	int ret;
@@ -1459,11 +1463,14 @@ static const struct drm_bridge_funcs tc_edp_bridge_funcs = {
 	.detach = tc_edp_bridge_detach,
 	.mode_valid = tc_edp_mode_valid,
 	.mode_set = tc_bridge_mode_set,
-	.enable = tc_edp_bridge_enable,
-	.disable = tc_edp_bridge_disable,
+	.atomic_enable = tc_edp_bridge_atomic_enable,
+	.atomic_disable = tc_edp_bridge_atomic_disable,
 	.mode_fixup = tc_bridge_mode_fixup,
 	.detect = tc_bridge_detect,
 	.get_edid = tc_get_edid,
+	.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
+	.atomic_reset = drm_atomic_helper_bridge_reset,
 };
 
 static bool tc_readable_reg(struct device *dev, unsigned int reg)
-- 
2.35.1

[PATCH v6 05/11] drm/bridge: tc358767: Implement atomic_check callback

[Marek Vasut]

Implement .atomic_check callback which prevents user space from setting
unsupported mode. The tc_edp_common_atomic_check() variant is already
prepared for DSI-to-DPI mode addition, which has different frequency
limits.

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
---
V2: - New patch
V3: - Drop edp from tc_edp_common_atomic_check,
      s@\<tc_edp_common_atomic_check\>@tc_common_atomic_check@g
    - Return -EINVAL in case clock frequency is too high
V4: - Add RB/TB by Lucas
V5: - No change
V6: - No change
---
 drivers/gpu/drm/bridge/tc358767.c | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index f88d8e616f7f..e95153d9c149 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -1289,6 +1289,31 @@ static bool tc_bridge_mode_fixup(struct drm_bridge *bridge,
 	return true;
 }
 
+static int tc_common_atomic_check(struct drm_bridge *bridge,
+				  struct drm_bridge_state *bridge_state,
+				  struct drm_crtc_state *crtc_state,
+				  struct drm_connector_state *conn_state,
+				  const unsigned int max_khz)
+{
+	tc_bridge_mode_fixup(bridge, &crtc_state->mode,
+			     &crtc_state->adjusted_mode);
+
+	if (crtc_state->adjusted_mode.clock > max_khz)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int tc_edp_atomic_check(struct drm_bridge *bridge,
+			       struct drm_bridge_state *bridge_state,
+			       struct drm_crtc_state *crtc_state,
+			       struct drm_connector_state *conn_state)
+{
+	/* DPI->(e)DP interface clock limitation: upto 154 MHz */
+	return tc_common_atomic_check(bridge, bridge_state, crtc_state,
+				      conn_state, 154000);
+}
+
 static enum drm_mode_status
 tc_edp_mode_valid(struct drm_bridge *bridge,
 		  const struct drm_display_info *info,
@@ -1463,6 +1488,7 @@ static const struct drm_bridge_funcs tc_edp_bridge_funcs = {
 	.detach = tc_edp_bridge_detach,
 	.mode_valid = tc_edp_mode_valid,
 	.mode_set = tc_bridge_mode_set,
+	.atomic_check = tc_edp_atomic_check,
 	.atomic_enable = tc_edp_bridge_atomic_enable,
 	.atomic_disable = tc_edp_bridge_atomic_disable,
 	.mode_fixup = tc_bridge_mode_fixup,
-- 
2.35.1

[PATCH v6 06/11] drm/bridge: tc358767: Move (e)DP bridge endpoint parsing into dedicated function

[Marek Vasut]

The TC358767/TC358867/TC9595 are all capable of operating in multiple
modes, DPI-to-(e)DP, DSI-to-(e)DP, DSI-to-DPI. Only the first mode is
currently supported. In order to support the rest of the modes without
making the tc_probe() overly long, split the bridge endpoint parsing
into dedicated function, where the necessary logic to detect the bridge
mode based on which endpoints are connected, can be implemented.

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
---
V2: - Rename tc_probe_bridge_mode() to tc_probe_edp_bridge_endpoint()
      to better reflect that it parses the (e)DP output endpoint
V3: - Add RB from Lucas
V4: - Add TB from Lucas
V5: - No change
V6: - No change
---
 drivers/gpu/drm/bridge/tc358767.c | 30 +++++++++++++++++++++---------
 1 file changed, 21 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index e95153d9c149..0f24156543ba 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -1583,19 +1583,12 @@ static irqreturn_t tc_irq_handler(int irq, void *arg)
 	return IRQ_HANDLED;
 }
 
-static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id)
+static int tc_probe_edp_bridge_endpoint(struct tc_data *tc)
 {
-	struct device *dev = &client->dev;
+	struct device *dev = tc->dev;
 	struct drm_panel *panel;
-	struct tc_data *tc;
 	int ret;
 
-	tc = devm_kzalloc(dev, sizeof(*tc), GFP_KERNEL);
-	if (!tc)
-		return -ENOMEM;
-
-	tc->dev = dev;
-
 	/* port@2 is the output port */
 	ret = drm_of_find_panel_or_bridge(dev->of_node, 2, 0, &panel, NULL);
 	if (ret && ret != -ENODEV)
@@ -1614,6 +1607,25 @@ static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		tc->bridge.type = DRM_MODE_CONNECTOR_DisplayPort;
 	}
 
+	return ret;
+}
+
+static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct tc_data *tc;
+	int ret;
+
+	tc = devm_kzalloc(dev, sizeof(*tc), GFP_KERNEL);
+	if (!tc)
+		return -ENOMEM;
+
+	tc->dev = dev;
+
+	ret = tc_probe_edp_bridge_endpoint(tc);
+	if (ret)
+		return ret;
+
 	/* Shut down GPIO is optional */
 	tc->sd_gpio = devm_gpiod_get_optional(dev, "shutdown", GPIOD_OUT_HIGH);
 	if (IS_ERR(tc->sd_gpio))
-- 
2.35.1

[PATCH v6 07/11] drm/bridge: tc358767: Wrap (e)DP aux I2C registration into tc_aux_link_setup()

[Marek Vasut]

This bit of code is (e)DP and aux I2C link specific, move it into
tc_aux_link_setup() to permit cleaner addition of DSI-to-DPI mode.
No functional change.

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
---
V2: - New patch
V3: - Add RB from Lucas
V4: - Add TB from Lucas
V5: - No change
V6: - No change
---
 drivers/gpu/drm/bridge/tc358767.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index 0f24156543ba..8a8b495aa0ad 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -656,6 +656,12 @@ static int tc_aux_link_setup(struct tc_data *tc)
 	if (ret)
 		goto err;
 
+	/* Register DP AUX channel */
+	tc->aux.name = "TC358767 AUX i2c adapter";
+	tc->aux.dev = tc->dev;
+	tc->aux.transfer = tc_aux_transfer;
+	drm_dp_aux_init(&tc->aux);
+
 	return 0;
 err:
 	dev_err(tc->dev, "tc_aux_link_setup failed: %d\n", ret);
@@ -1736,12 +1742,6 @@ static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	if (ret)
 		return ret;
 
-	/* Register DP AUX channel */
-	tc->aux.name = "TC358767 AUX i2c adapter";
-	tc->aux.dev = tc->dev;
-	tc->aux.transfer = tc_aux_transfer;
-	drm_dp_aux_init(&tc->aux);
-
 	tc->bridge.funcs = &tc_edp_bridge_funcs;
 	if (tc->hpd_pin >= 0)
 		tc->bridge.ops |= DRM_BRIDGE_OP_DETECT;
-- 
2.35.1

[PATCH v6 08/11] drm/bridge: tc358767: Move bridge ops setup into tc_probe_edp_bridge_endpoint()

[Marek Vasut]

The bridge ops are specific to the bridge configuration, move them
into tc_probe_edp_bridge_endpoint() to permit cleaner addition of
DSI-to-DPI mode. No functional change.

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
---
V2: - New patch
V3: - No change
V4: - Add RB/TB from Lucas
V5: - No change
V6: - No change
---
 drivers/gpu/drm/bridge/tc358767.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index 8a8b495aa0ad..8c468f77618d 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -1613,6 +1613,11 @@ static int tc_probe_edp_bridge_endpoint(struct tc_data *tc)
 		tc->bridge.type = DRM_MODE_CONNECTOR_DisplayPort;
 	}
 
+	tc->bridge.funcs = &tc_edp_bridge_funcs;
+	if (tc->hpd_pin >= 0)
+		tc->bridge.ops |= DRM_BRIDGE_OP_DETECT;
+	tc->bridge.ops |= DRM_BRIDGE_OP_EDID;
+
 	return ret;
 }
 
@@ -1742,11 +1747,6 @@ static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	if (ret)
 		return ret;
 
-	tc->bridge.funcs = &tc_edp_bridge_funcs;
-	if (tc->hpd_pin >= 0)
-		tc->bridge.ops |= DRM_BRIDGE_OP_DETECT;
-	tc->bridge.ops |= DRM_BRIDGE_OP_EDID;
-
 	tc->bridge.of_node = dev->of_node;
 	drm_bridge_add(&tc->bridge);
 
-- 
2.35.1

[PATCH v6 09/11] drm/bridge: tc358767: Detect bridge mode from connected endpoints in DT

[Marek Vasut]

The TC358767/TC358867/TC9595 are all capable of operating in multiple
modes, DPI-to-(e)DP, DSI-to-(e)DP, DSI-to-DPI. Only the first mode is
currently supported. It is possible to find out the mode in which the
bridge should be operated by testing connected endpoints in DT.

Port allocation:
port@0 - DSI input
port@1 - DPI input/output
port@2 - eDP output

Possible connections:
DPI -> port@1 -> port@2 -> eDP :: [port@0 is not connected]
DSI -> port@0 -> port@2 -> eDP :: [port@1 is not connected]
DSI -> port@0 -> port@1 -> DPI :: [port@2 is not connected]

Add function to determine the bridge mode based on connected endpoints.

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
---
V2: - New patch
V3: - Add RB from Lucas
V4: - Add TB from Lucas
V5: - No change
V6: - No change
---
 drivers/gpu/drm/bridge/tc358767.c | 46 ++++++++++++++++++++++++++++++-
 1 file changed, 45 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index 8c468f77618d..dd324cf16e4d 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -1621,6 +1621,50 @@ static int tc_probe_edp_bridge_endpoint(struct tc_data *tc)
 	return ret;
 }
 
+static int tc_probe_bridge_endpoint(struct tc_data *tc)
+{
+	struct device *dev = tc->dev;
+	struct of_endpoint endpoint;
+	struct device_node *node = NULL;
+	const u8 mode_dpi_to_edp = BIT(1) | BIT(2);
+	const u8 mode_dsi_to_edp = BIT(0) | BIT(2);
+	const u8 mode_dsi_to_dpi = BIT(0) | BIT(1);
+	u8 mode = 0;
+
+	/*
+	 * Determine bridge configuration.
+	 *
+	 * Port allocation:
+	 * port@0 - DSI input
+	 * port@1 - DPI input/output
+	 * port@2 - eDP output
+	 *
+	 * Possible connections:
+	 * DPI -> port@1 -> port@2 -> eDP :: [port@0 is not connected]
+	 * DSI -> port@0 -> port@2 -> eDP :: [port@1 is not connected]
+	 * DSI -> port@0 -> port@1 -> DPI :: [port@2 is not connected]
+	 */
+
+	for_each_endpoint_of_node(dev->of_node, node) {
+		of_graph_parse_endpoint(node, &endpoint);
+		if (endpoint.port > 2)
+			return -EINVAL;
+
+		mode |= BIT(endpoint.port);
+	}
+
+	if (mode == mode_dpi_to_edp)
+		return tc_probe_edp_bridge_endpoint(tc);
+	else if (mode == mode_dsi_to_dpi)
+		dev_warn(dev, "The mode DSI-to-DPI is not supported!\n");
+	else if (mode == mode_dsi_to_edp)
+		dev_warn(dev, "The mode DSI-to-(e)DP is not supported!\n");
+	else
+		dev_warn(dev, "Invalid mode (0x%x) is not supported!\n", mode);
+
+	return -EINVAL;
+}
+
 static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id)
 {
 	struct device *dev = &client->dev;
@@ -1633,7 +1677,7 @@ static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id)
 
 	tc->dev = dev;
 
-	ret = tc_probe_edp_bridge_endpoint(tc);
+	ret = tc_probe_bridge_endpoint(tc);
 	if (ret)
 		return ret;
 
-- 
2.35.1

[PATCH v6 10/11] drm/bridge: tc358767: Split tc_set_video_mode() into common and (e)DP part

[Marek Vasut]

The tc_set_video_mode() sets up both common and (e)DP video mode settings of
the bridge chip. Split the function into tc_set_common_video_mode() to set
the common settings and tc_set_edp_video_mode() to set the (e)DP specific
settings. No functional change.

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
---
V2: - New patch
V3: - Add RB from Lucas
V4: - Add TB from Lucas
V5: Drop unused variables from tc_set_common_video_mode()
V6: - No change
---
 drivers/gpu/drm/bridge/tc358767.c | 65 ++++++++++++++++++-------------
 1 file changed, 38 insertions(+), 27 deletions(-)

diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index dd324cf16e4d..02f9cea738d2 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -734,33 +734,16 @@ static int tc_get_display_props(struct tc_data *tc)
 	return ret;
 }
 
-static int tc_set_video_mode(struct tc_data *tc,
-			     const struct drm_display_mode *mode)
+static int tc_set_common_video_mode(struct tc_data *tc,
+				    const struct drm_display_mode *mode)
 {
-	int ret;
-	int vid_sync_dly;
-	int max_tu_symbol;
-
 	int left_margin = mode->htotal - mode->hsync_end;
 	int right_margin = mode->hsync_start - mode->hdisplay;
 	int hsync_len = mode->hsync_end - mode->hsync_start;
 	int upper_margin = mode->vtotal - mode->vsync_end;
 	int lower_margin = mode->vsync_start - mode->vdisplay;
 	int vsync_len = mode->vsync_end - mode->vsync_start;
-	u32 dp0_syncval;
-	u32 bits_per_pixel = 24;
-	u32 in_bw, out_bw;
-
-	/*
-	 * Recommended maximum number of symbols transferred in a transfer unit:
-	 * DIV_ROUND_UP((input active video bandwidth in bytes) * tu_size,
-	 *              (output active video bandwidth in bytes))
-	 * Must be less than tu_size.
-	 */
-
-	in_bw = mode->clock * bits_per_pixel / 8;
-	out_bw = tc->link.num_lanes * tc->link.rate;
-	max_tu_symbol = DIV_ROUND_UP(in_bw * TU_SIZE_RECOMMENDED, out_bw);
+	int ret;
 
 	dev_dbg(tc->dev, "set mode %dx%d\n",
 		mode->hdisplay, mode->vdisplay);
@@ -818,8 +801,35 @@ static int tc_set_video_mode(struct tc_data *tc,
 			   FIELD_PREP(COLOR_B, 99) |
 			   ENI2CFILTER |
 			   FIELD_PREP(COLOR_BAR_MODE, COLOR_BAR_MODE_BARS));
-	if (ret)
-		return ret;
+
+	return ret;
+}
+
+static int tc_set_edp_video_mode(struct tc_data *tc,
+				 const struct drm_display_mode *mode)
+{
+	int ret;
+	int vid_sync_dly;
+	int max_tu_symbol;
+
+	int left_margin = mode->htotal - mode->hsync_end;
+	int hsync_len = mode->hsync_end - mode->hsync_start;
+	int upper_margin = mode->vtotal - mode->vsync_end;
+	int vsync_len = mode->vsync_end - mode->vsync_start;
+	u32 dp0_syncval;
+	u32 bits_per_pixel = 24;
+	u32 in_bw, out_bw;
+
+	/*
+	 * Recommended maximum number of symbols transferred in a transfer unit:
+	 * DIV_ROUND_UP((input active video bandwidth in bytes) * tu_size,
+	 *              (output active video bandwidth in bytes))
+	 * Must be less than tu_size.
+	 */
+
+	in_bw = mode->clock * bits_per_pixel / 8;
+	out_bw = tc->link.num_lanes * tc->link.rate;
+	max_tu_symbol = DIV_ROUND_UP(in_bw * TU_SIZE_RECOMMENDED, out_bw);
 
 	/* DP Main Stream Attributes */
 	vid_sync_dly = hsync_len + left_margin + mode->hdisplay;
@@ -869,10 +879,7 @@ static int tc_set_video_mode(struct tc_data *tc,
 			   FIELD_PREP(MAX_TU_SYMBOL, max_tu_symbol) |
 			   FIELD_PREP(TU_SIZE, TU_SIZE_RECOMMENDED) |
 			   BPC_8);
-	if (ret)
-		return ret;
-
-	return 0;
+	return ret;
 }
 
 static int tc_wait_link_training(struct tc_data *tc)
@@ -1185,7 +1192,11 @@ static int tc_edp_stream_enable(struct tc_data *tc)
 			return ret;
 	}
 
-	ret = tc_set_video_mode(tc, &tc->mode);
+	ret = tc_set_common_video_mode(tc, &tc->mode);
+	if (ret)
+		return ret;
+
+	ret = tc_set_edp_video_mode(tc, &tc->mode);
 	if (ret)
 		return ret;
 
-- 
2.35.1

[PATCH v6 11/11] drm/bridge: tc358767: Add DSI-to-DPI mode support

[Marek Vasut]

The TC358767/TC358867/TC9595 are all capable of operating in multiple
modes, DPI-to-(e)DP, DSI-to-(e)DP, DSI-to-DPI. Add support for the
DSI-to-DPI mode.

This requires skipping most of the (e)DP initialization code, which is
currently a large part of this driver, hence it is better to have far
simpler separate tc_dpi_bridge_funcs and their implementation.

The configuration of DPI output is also much simpler. The configuration
of the DSI input is rather similar to the other TC bridge chips.

The Pixel PLL in DPI output mode does not have the 65..150 MHz limitation
imposed on the (e)DP output mode, so this limitation is skipped to permit
operating panels with far slower pixel clock, even below 9 MHz. This mode
of operation of the PLL is valid and tested.

The detection of bridge mode is now added into tc_probe_bridge_mode(),
where in case a DPI panel is found on port@1 endpoint@1, the mode is
assumed to be DSI-to-DPI. If (e)DP is detected on port@2, the mode is
assumed to be DPI-to-(e)DP.

The DSI-to-(e)DP mode is not supported due to lack of proper hardware,
but this would be some sort of mix between the two aforementioned modes.

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de> # in DSI to DPI mode
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
---
V2: - Rebase on next-20220217 and new patches in this series
V3: - Drop edp from tc_edp_common_atomic_check,
      s@\<tc_edp_common_atomic_check\>@tc_common_atomic_check@g
    - Limit Pixel PLL output to 0-100 MHz for DPI and 150-650 MHz for eDP
    - Drop VID_EN write from tc_dpi_stream_disable()
    - Reduce PLL stabilization delay to 120..150us in tc_dpi_stream_enable()
    - Call drm_bridge_remove() in case tc_mipi_dsi_host_attach() fails
    - Check of_property_count_u32_elems() return code as int instead of u8
    - Enable DP0/DP1 PLL for DSI-to-DPI mode too, they clock the internal
      framebuffer and it is too slow if those PLLs are in bypass
V4: - Rebase on top of dropped drm/bridge: tc358767: Move hardware init to enable callback
    - Use -1 in of_graph_get_endpoint_by_regs(.., .., -1) third param
    - Select DRM_MIPI_DSI
    - Add RB from Lucas
V5: - No change
V6: - Fix checkpatch strict CHECK: Unnecessary parentheses around 'clk < clk_min'
    - Fix checkpatch strict CHECK: Alignment should match open parenthesis
    - Add DSI-to-DPI mode TB from Lucas
---
 drivers/gpu/drm/bridge/Kconfig    |   1 +
 drivers/gpu/drm/bridge/tc358767.c | 358 +++++++++++++++++++++++++++++-
 2 files changed, 348 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index ee7610c2c1a4..a2e8a0fb13ea 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -293,6 +293,7 @@ config DRM_TOSHIBA_TC358767
 	select DRM_DP_HELPER
 	select DRM_KMS_HELPER
 	select REGMAP_I2C
+	select DRM_MIPI_DSI
 	select DRM_PANEL
 	help
 	  Toshiba TC358767 eDP bridge chip driver.
diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index 02f9cea738d2..a1c5b7b2f37a 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -1,6 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * tc358767 eDP bridge driver
+ * TC358767/TC358867/TC9595 DSI/DPI-to-DPI/(e)DP bridge driver
+ *
+ * The TC358767/TC358867/TC9595 can operate in multiple modes.
+ * The following modes are supported:
+ *   DPI->(e)DP -- supported
+ *   DSI->DPI .... supported
+ *   DSI->(e)DP .. NOT supported
  *
  * Copyright (C) 2016 CogentEmbedded Inc
  * Author: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
@@ -29,6 +35,7 @@
 #include <drm/drm_bridge.h>
 #include <drm/dp/drm_dp_helper.h>
 #include <drm/drm_edid.h>
+#include <drm/drm_mipi_dsi.h>
 #include <drm/drm_of.h>
 #include <drm/drm_panel.h>
 #include <drm/drm_print.h>
@@ -36,7 +43,35 @@
 
 /* Registers */
 
-/* Display Parallel Interface */
+/* PPI layer registers */
+#define PPI_STARTPPI		0x0104 /* START control bit */
+#define PPI_LPTXTIMECNT		0x0114 /* LPTX timing signal */
+#define LPX_PERIOD			3
+#define PPI_LANEENABLE		0x0134
+#define PPI_TX_RX_TA		0x013c
+#define TTA_GET				0x40000
+#define TTA_SURE			6
+#define PPI_D0S_ATMR		0x0144
+#define PPI_D1S_ATMR		0x0148
+#define PPI_D0S_CLRSIPOCOUNT	0x0164 /* Assertion timer for Lane 0 */
+#define PPI_D1S_CLRSIPOCOUNT	0x0168 /* Assertion timer for Lane 1 */
+#define PPI_D2S_CLRSIPOCOUNT	0x016c /* Assertion timer for Lane 2 */
+#define PPI_D3S_CLRSIPOCOUNT	0x0170 /* Assertion timer for Lane 3 */
+#define PPI_START_FUNCTION		BIT(0)
+
+/* DSI layer registers */
+#define DSI_STARTDSI		0x0204 /* START control bit of DSI-TX */
+#define DSI_LANEENABLE		0x0210 /* Enables each lane */
+#define DSI_RX_START			BIT(0)
+
+/* Lane enable PPI and DSI register bits */
+#define LANEENABLE_CLEN		BIT(0)
+#define LANEENABLE_L0EN		BIT(1)
+#define LANEENABLE_L1EN		BIT(2)
+#define LANEENABLE_L2EN		BIT(1)
+#define LANEENABLE_L3EN		BIT(2)
+
+/* Display Parallel Input Interface */
 #define DPIPXLFMT		0x0440
 #define VS_POL_ACTIVE_LOW		(1 << 10)
 #define HS_POL_ACTIVE_LOW		(1 << 9)
@@ -48,6 +83,14 @@
 #define DPI_BPP_RGB666			(1 << 0)
 #define DPI_BPP_RGB565			(2 << 0)
 
+/* Display Parallel Output Interface */
+#define POCTRL			0x0448
+#define POCTRL_S2P			BIT(7)
+#define POCTRL_PCLK_POL			BIT(3)
+#define POCTRL_VS_POL			BIT(2)
+#define POCTRL_HS_POL			BIT(1)
+#define POCTRL_DE_POL			BIT(0)
+
 /* Video Path */
 #define VPCTRL0			0x0450
 #define VSDELAY			GENMASK(31, 20)
@@ -247,6 +290,9 @@ struct tc_data {
 	struct drm_bridge	*panel_bridge;
 	struct drm_connector	connector;
 
+	struct mipi_dsi_device	*dsi;
+	u8			dsi_lanes;
+
 	/* link settings */
 	struct tc_edp_link	link;
 
@@ -469,10 +515,24 @@ static int tc_pxl_pll_en(struct tc_data *tc, u32 refclk, u32 pixelclock)
 	int mul, best_mul = 1;
 	int delta, best_delta;
 	int ext_div[] = {1, 2, 3, 5, 7};
+	int clk_min, clk_max;
 	int best_pixelclock = 0;
 	int vco_hi = 0;
 	u32 pxl_pllparam;
 
+	/*
+	 * refclk * mul / (ext_pre_div * pre_div) should be in range:
+	 * - DPI ..... 0 to 100 MHz
+	 * - (e)DP ... 150 to 650 MHz
+	 */
+	if (tc->bridge.type == DRM_MODE_CONNECTOR_DPI) {
+		clk_min = 0;
+		clk_max = 100000000;
+	} else {
+		clk_min = 150000000;
+		clk_max = 650000000;
+	}
+
 	dev_dbg(tc->dev, "PLL: requested %d pixelclock, ref %d\n", pixelclock,
 		refclk);
 	best_delta = pixelclock;
@@ -499,11 +559,7 @@ static int tc_pxl_pll_en(struct tc_data *tc, u32 refclk, u32 pixelclock)
 					continue;
 
 				clk = (refclk / ext_div[i_pre] / div) * mul;
-				/*
-				 * refclk * mul / (ext_pre_div * pre_div)
-				 * should be in the 150 to 650 MHz range
-				 */
-				if ((clk > 650000000) || (clk < 150000000))
+				if (clk > clk_max || clk < clk_min)
 					continue;
 
 				clk = clk / ext_div[i_post];
@@ -805,6 +861,20 @@ static int tc_set_common_video_mode(struct tc_data *tc,
 	return ret;
 }
 
+static int tc_set_dpi_video_mode(struct tc_data *tc,
+				 const struct drm_display_mode *mode)
+{
+	u32 value = POCTRL_S2P;
+
+	if (tc->mode.flags & DRM_MODE_FLAG_NHSYNC)
+		value |= POCTRL_HS_POL;
+
+	if (tc->mode.flags & DRM_MODE_FLAG_NVSYNC)
+		value |= POCTRL_VS_POL;
+
+	return regmap_write(tc->regmap, POCTRL, value);
+}
+
 static int tc_set_edp_video_mode(struct tc_data *tc,
 				 const struct drm_display_mode *mode)
 {
@@ -1177,6 +1247,85 @@ static int tc_main_link_disable(struct tc_data *tc)
 	return regmap_write(tc->regmap, DP0CTL, 0);
 }
 
+static int tc_dpi_stream_enable(struct tc_data *tc)
+{
+	int ret;
+	u32 value;
+
+	dev_dbg(tc->dev, "enable video stream\n");
+
+	/* Setup PLL */
+	ret = tc_set_syspllparam(tc);
+	if (ret)
+		return ret;
+
+	/*
+	 * Initially PLLs are in bypass. Force PLL parameter update,
+	 * disable PLL bypass, enable PLL
+	 */
+	ret = tc_pllupdate(tc, DP0_PLLCTRL);
+	if (ret)
+		return ret;
+
+	ret = tc_pllupdate(tc, DP1_PLLCTRL);
+	if (ret)
+		return ret;
+
+	/* Pixel PLL must always be enabled for DPI mode */
+	ret = tc_pxl_pll_en(tc, clk_get_rate(tc->refclk),
+			    1000 * tc->mode.clock);
+	if (ret)
+		return ret;
+
+	regmap_write(tc->regmap, PPI_D0S_CLRSIPOCOUNT, 3);
+	regmap_write(tc->regmap, PPI_D1S_CLRSIPOCOUNT, 3);
+	regmap_write(tc->regmap, PPI_D2S_CLRSIPOCOUNT, 3);
+	regmap_write(tc->regmap, PPI_D3S_CLRSIPOCOUNT, 3);
+	regmap_write(tc->regmap, PPI_D0S_ATMR, 0);
+	regmap_write(tc->regmap, PPI_D1S_ATMR, 0);
+	regmap_write(tc->regmap, PPI_TX_RX_TA, TTA_GET | TTA_SURE);
+	regmap_write(tc->regmap, PPI_LPTXTIMECNT, LPX_PERIOD);
+
+	value = ((LANEENABLE_L0EN << tc->dsi_lanes) - LANEENABLE_L0EN) |
+		LANEENABLE_CLEN;
+	regmap_write(tc->regmap, PPI_LANEENABLE, value);
+	regmap_write(tc->regmap, DSI_LANEENABLE, value);
+
+	ret = tc_set_common_video_mode(tc, &tc->mode);
+	if (ret)
+		return ret;
+
+	ret = tc_set_dpi_video_mode(tc, &tc->mode);
+	if (ret)
+		return ret;
+
+	/* Set input interface */
+	value = DP0_AUDSRC_NO_INPUT;
+	if (tc_test_pattern)
+		value |= DP0_VIDSRC_COLOR_BAR;
+	else
+		value |= DP0_VIDSRC_DSI_RX;
+	ret = regmap_write(tc->regmap, SYSCTRL, value);
+	if (ret)
+		return ret;
+
+	usleep_range(120, 150);
+
+	regmap_write(tc->regmap, PPI_STARTPPI, PPI_START_FUNCTION);
+	regmap_write(tc->regmap, DSI_STARTDSI, DSI_RX_START);
+
+	return 0;
+}
+
+static int tc_dpi_stream_disable(struct tc_data *tc)
+{
+	dev_dbg(tc->dev, "disable video stream\n");
+
+	tc_pxl_pll_dis(tc);
+
+	return 0;
+}
+
 static int tc_edp_stream_enable(struct tc_data *tc)
 {
 	int ret;
@@ -1251,6 +1400,34 @@ static int tc_edp_stream_disable(struct tc_data *tc)
 	return 0;
 }
 
+static void
+tc_dpi_bridge_atomic_enable(struct drm_bridge *bridge,
+			    struct drm_bridge_state *old_bridge_state)
+
+{
+	struct tc_data *tc = bridge_to_tc(bridge);
+	int ret;
+
+	ret = tc_dpi_stream_enable(tc);
+	if (ret < 0) {
+		dev_err(tc->dev, "main link stream start error: %d\n", ret);
+		tc_main_link_disable(tc);
+		return;
+	}
+}
+
+static void
+tc_dpi_bridge_atomic_disable(struct drm_bridge *bridge,
+			     struct drm_bridge_state *old_bridge_state)
+{
+	struct tc_data *tc = bridge_to_tc(bridge);
+	int ret;
+
+	ret = tc_dpi_stream_disable(tc);
+	if (ret < 0)
+		dev_err(tc->dev, "main link stream stop error: %d\n", ret);
+}
+
 static void
 tc_edp_bridge_atomic_enable(struct drm_bridge *bridge,
 			    struct drm_bridge_state *old_bridge_state)
@@ -1321,6 +1498,16 @@ static int tc_common_atomic_check(struct drm_bridge *bridge,
 	return 0;
 }
 
+static int tc_dpi_atomic_check(struct drm_bridge *bridge,
+			       struct drm_bridge_state *bridge_state,
+			       struct drm_crtc_state *crtc_state,
+			       struct drm_connector_state *conn_state)
+{
+	/* DSI->DPI interface clock limitation: upto 100 MHz */
+	return tc_common_atomic_check(bridge, bridge_state, crtc_state,
+				      conn_state, 100000);
+}
+
 static int tc_edp_atomic_check(struct drm_bridge *bridge,
 			       struct drm_bridge_state *bridge_state,
 			       struct drm_crtc_state *crtc_state,
@@ -1331,6 +1518,18 @@ static int tc_edp_atomic_check(struct drm_bridge *bridge,
 				      conn_state, 154000);
 }
 
+static enum drm_mode_status
+tc_dpi_mode_valid(struct drm_bridge *bridge,
+		  const struct drm_display_info *info,
+		  const struct drm_display_mode *mode)
+{
+	/* DPI interface clock limitation: upto 100 MHz */
+	if (mode->clock > 100000)
+		return MODE_CLOCK_HIGH;
+
+	return MODE_OK;
+}
+
 static enum drm_mode_status
 tc_edp_mode_valid(struct drm_bridge *bridge,
 		  const struct drm_display_info *info,
@@ -1442,6 +1641,18 @@ static const struct drm_connector_funcs tc_connector_funcs = {
 	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
 };
 
+static int tc_dpi_bridge_attach(struct drm_bridge *bridge,
+				enum drm_bridge_attach_flags flags)
+{
+	struct tc_data *tc = bridge_to_tc(bridge);
+
+	if (!tc->panel_bridge)
+		return 0;
+
+	return drm_bridge_attach(tc->bridge.encoder, tc->panel_bridge,
+				 &tc->bridge, flags);
+}
+
 static int tc_edp_bridge_attach(struct drm_bridge *bridge,
 				enum drm_bridge_attach_flags flags)
 {
@@ -1500,6 +1711,45 @@ static void tc_edp_bridge_detach(struct drm_bridge *bridge)
 	drm_dp_aux_unregister(&bridge_to_tc(bridge)->aux);
 }
 
+#define MAX_INPUT_SEL_FORMATS	1
+
+static u32 *
+tc_dpi_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
+				 struct drm_bridge_state *bridge_state,
+				 struct drm_crtc_state *crtc_state,
+				 struct drm_connector_state *conn_state,
+				 u32 output_fmt,
+				 unsigned int *num_input_fmts)
+{
+	u32 *input_fmts;
+
+	*num_input_fmts = 0;
+
+	input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, sizeof(*input_fmts),
+			     GFP_KERNEL);
+	if (!input_fmts)
+		return NULL;
+
+	/* This is the DSI-end bus format */
+	input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24;
+	*num_input_fmts = 1;
+
+	return input_fmts;
+}
+
+static const struct drm_bridge_funcs tc_dpi_bridge_funcs = {
+	.attach = tc_dpi_bridge_attach,
+	.mode_valid = tc_dpi_mode_valid,
+	.mode_set = tc_bridge_mode_set,
+	.atomic_check = tc_dpi_atomic_check,
+	.atomic_enable = tc_dpi_bridge_atomic_enable,
+	.atomic_disable = tc_dpi_bridge_atomic_disable,
+	.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
+	.atomic_reset = drm_atomic_helper_bridge_reset,
+	.atomic_get_input_bus_fmts = tc_dpi_atomic_get_input_bus_fmts,
+};
+
 static const struct drm_bridge_funcs tc_edp_bridge_funcs = {
 	.attach = tc_edp_bridge_attach,
 	.detach = tc_edp_bridge_detach,
@@ -1600,6 +1850,82 @@ static irqreturn_t tc_irq_handler(int irq, void *arg)
 	return IRQ_HANDLED;
 }
 
+static int tc_mipi_dsi_host_attach(struct tc_data *tc)
+{
+	struct device *dev = tc->dev;
+	struct device_node *host_node;
+	struct device_node *endpoint;
+	struct mipi_dsi_device *dsi;
+	struct mipi_dsi_host *host;
+	const struct mipi_dsi_device_info info = {
+		.type = "tc358767",
+		.channel = 0,
+		.node = NULL,
+	};
+	int dsi_lanes, ret;
+
+	endpoint = of_graph_get_endpoint_by_regs(dev->of_node, 0, -1);
+	dsi_lanes = of_property_count_u32_elems(endpoint, "data-lanes");
+	host_node = of_graph_get_remote_port_parent(endpoint);
+	host = of_find_mipi_dsi_host_by_node(host_node);
+	of_node_put(host_node);
+	of_node_put(endpoint);
+
+	if (dsi_lanes < 0 || dsi_lanes > 4)
+		return -EINVAL;
+
+	if (!host)
+		return -EPROBE_DEFER;
+
+	dsi = mipi_dsi_device_register_full(host, &info);
+	if (IS_ERR(dsi))
+		return dev_err_probe(dev, PTR_ERR(dsi),
+				     "failed to create dsi device\n");
+
+	tc->dsi = dsi;
+
+	tc->dsi_lanes = dsi_lanes;
+	dsi->lanes = tc->dsi_lanes;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0) {
+		dev_err(dev, "failed to attach dsi to host: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int tc_probe_dpi_bridge_endpoint(struct tc_data *tc)
+{
+	struct device *dev = tc->dev;
+	struct drm_panel *panel;
+	int ret;
+
+	/* port@1 is the DPI input/output port */
+	ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &panel, NULL);
+	if (ret && ret != -ENODEV)
+		return ret;
+
+	if (panel) {
+		struct drm_bridge *panel_bridge;
+
+		panel_bridge = devm_drm_panel_bridge_add(dev, panel);
+		if (IS_ERR(panel_bridge))
+			return PTR_ERR(panel_bridge);
+
+		tc->panel_bridge = panel_bridge;
+		tc->bridge.type = DRM_MODE_CONNECTOR_DPI;
+		tc->bridge.funcs = &tc_dpi_bridge_funcs;
+
+		return 0;
+	}
+
+	return ret;
+}
+
 static int tc_probe_edp_bridge_endpoint(struct tc_data *tc)
 {
 	struct device *dev = tc->dev;
@@ -1667,7 +1993,7 @@ static int tc_probe_bridge_endpoint(struct tc_data *tc)
 	if (mode == mode_dpi_to_edp)
 		return tc_probe_edp_bridge_endpoint(tc);
 	else if (mode == mode_dsi_to_dpi)
-		dev_warn(dev, "The mode DSI-to-DPI is not supported!\n");
+		return tc_probe_dpi_bridge_endpoint(tc);
 	else if (mode == mode_dsi_to_edp)
 		dev_warn(dev, "The mode DSI-to-(e)DP is not supported!\n");
 	else
@@ -1798,15 +2124,25 @@ static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		}
 	}
 
-	ret = tc_aux_link_setup(tc);
-	if (ret)
-		return ret;
+	if (tc->bridge.type != DRM_MODE_CONNECTOR_DPI) { /* (e)DP output */
+		ret = tc_aux_link_setup(tc);
+		if (ret)
+			return ret;
+	}
 
 	tc->bridge.of_node = dev->of_node;
 	drm_bridge_add(&tc->bridge);
 
 	i2c_set_clientdata(client, tc);
 
+	if (tc->bridge.type == DRM_MODE_CONNECTOR_DPI) { /* DPI output */
+		ret = tc_mipi_dsi_host_attach(tc);
+		if (ret) {
+			drm_bridge_remove(&tc->bridge);
+			return ret;
+		}
+	}
+
 	return 0;
 }
 
-- 
2.35.1

Re: [PATCH v6 00/11] drm/bridge: tc358767: Add DSI-to-DPI mode support

[Robert Foss]

On Thu, 31 Mar 2022 at 17:20, Marek Vasut <marex@denx.de> wrote:
>
> The TC358767/TC358867/TC9595 are all capable of operating in multiple
> modes, DPI-to-(e)DP, DSI-to-(e)DP, DSI-to-DPI. Clean up the driver,
> switch to atomic ops, and add support for the DSI-to-DPI mode in
> addition to already supported DPI-to-(e)DP mode.
>
> Cc: Jonas Karlman <jonas@kwiboo.se>
> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
> Cc: Maxime Ripard <maxime@cerno.tech>
> Cc: Neil Armstrong <narmstrong@baylibre.com>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> To: dri-devel@lists.freedesktop.org
>
> Marek Vasut (11):
>   dt-bindings: display: bridge: tc358867: Document DPI output support
>   dt-bindings: display: bridge: tc358867: Document DSI data-lanes
>     property
>   drm/bridge: tc358767: Change tc_ prefix to tc_edp_ for (e)DP specific
>     functions
>   drm/bridge: tc358767: Convert to atomic ops
>   drm/bridge: tc358767: Implement atomic_check callback
>   drm/bridge: tc358767: Move (e)DP bridge endpoint parsing into
>     dedicated function
>   drm/bridge: tc358767: Wrap (e)DP aux I2C registration into
>     tc_aux_link_setup()
>   drm/bridge: tc358767: Move bridge ops setup into
>     tc_probe_edp_bridge_endpoint()
>   drm/bridge: tc358767: Detect bridge mode from connected endpoints in
>     DT
>   drm/bridge: tc358767: Split tc_set_video_mode() into common and (e)DP
>     part
>   drm/bridge: tc358767: Add DSI-to-DPI mode support
>
>  .../display/bridge/toshiba,tc358767.yaml      |  22 +-
>  drivers/gpu/drm/bridge/Kconfig                |   1 +
>  drivers/gpu/drm/bridge/tc358767.c             | 583 +++++++++++++++---
>  3 files changed, 530 insertions(+), 76 deletions(-)
>
> --
> 2.35.1
>

Applied to drm-misc-next.