[PATCH 1/5] arm: mvebu: turris_omnia: Fix RESET button message

[PATCH 1/5] arm: mvebu: turris_omnia: Fix RESET button message

[Pali Rohár]

Signed-off-by: Pali Rohár <pali@kernel.org>
---
 board/CZ.NIC/turris_omnia/turris_omnia.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/board/CZ.NIC/turris_omnia/turris_omnia.c b/board/CZ.NIC/turris_omnia/turris_omnia.c
index 83cfc80d1930..97292456f148 100644
--- a/board/CZ.NIC/turris_omnia/turris_omnia.c
+++ b/board/CZ.NIC/turris_omnia/turris_omnia.c
@@ -488,7 +488,7 @@ static void handle_reset_button(void)
 		/* Ensure bootcmd_rescue is used by distroboot */
 		env_set("boot_targets", "rescue");
 
-		printf("RESET button was pressed, overwriting bootcmd!\n");
+		printf("RESET button was pressed, overwriting boot_targets!\n");
 	} else {
 		/*
 		 * In case the user somehow managed to save environment with
-- 
2.20.1

[PATCH 2/5] arm: mvebu: turris_omnia: Define CONFIG_ETHPRIME instead of ethact= ENV

[Pali Rohár]

CONFIG_ETHPRIME defines primary ethernet device and env variable $ethact
stores currently active ethernet device.

So there is no point to set ethact= in default environment. Instead set
CONFIG_ETHPRIME properly.

Signed-off-by: Pali Rohár <pali@kernel.org>
---
 include/configs/turris_omnia.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/include/configs/turris_omnia.h b/include/configs/turris_omnia.h
index b35299b2fbb3..15f874ea22e1 100644
--- a/include/configs/turris_omnia.h
+++ b/include/configs/turris_omnia.h
@@ -26,6 +26,8 @@
 	"fdt_high=0x10000000\0"		\
 	"initrd_high=0x10000000\0"
 
+#define CONFIG_ETHPRIME		"ethernet@34000"
+
 /* Defines for SPL */
 #define CONFIG_SPL_SIZE			(140 << 10)
 #define CONFIG_SPL_MAX_SIZE		(CONFIG_SPL_SIZE - (CONFIG_SPL_TEXT_BASE - 0x40000000))
@@ -119,7 +121,6 @@
 	LOAD_ADDRESS_ENV_SETTINGS \
 	"fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
 	"console=ttyS0,115200\0" \
-	"ethact=ethernet@34000\0" \
 	"bootcmd_rescue=" TURRIS_OMNIA_BOOTCMD_RESCUE "\0" \
 	BOOTENV
 
-- 
2.20.1

[PATCH 3/5] arm: mvebu: turris_omnia: Always enable MMC, SCSI and USB boot targets

[Pali Rohár]

U-Boot for Turris Omnia is always compiled with MMC, SCSI and USB support,
so always enable macros for booting from these devices.

Signed-off-by: Pali Rohár <pali@kernel.org>
---
 include/configs/turris_omnia.h | 24 +++---------------------
 1 file changed, 3 insertions(+), 21 deletions(-)

diff --git a/include/configs/turris_omnia.h b/include/configs/turris_omnia.h
index 15f874ea22e1..25aa0d0f9075 100644
--- a/include/configs/turris_omnia.h
+++ b/include/configs/turris_omnia.h
@@ -54,28 +54,10 @@
 /* Include the common distro boot environment */
 #ifndef CONFIG_SPL_BUILD
 
-#ifdef CONFIG_MMC
-#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
-#else
-#define BOOT_TARGET_DEVICES_MMC(func)
-#endif
-
-#ifdef CONFIG_USB_STORAGE
-#define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
-#else
-#define BOOT_TARGET_DEVICES_USB(func)
-#endif
-
-#ifdef CONFIG_SCSI
-#define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
-#else
-#define BOOT_TARGET_DEVICES_SCSI(func)
-#endif
-
 #define BOOT_TARGET_DEVICES(func) \
-	BOOT_TARGET_DEVICES_MMC(func) \
-	BOOT_TARGET_DEVICES_SCSI(func) \
-	BOOT_TARGET_DEVICES_USB(func) \
+	func(MMC, mmc, 0) \
+	func(SCSI, scsi, 0) \
+	func(USB, usb, 0) \
 	func(PXE, pxe, na) \
 	func(DHCP, dhcp, na)
 
-- 
2.20.1

[PATCH 4/5] arm: mvebu: turris_omnia: Add NVMe to boot targets

[Pali Rohár]

U-Boot for Turris Omnia has already enabled NVMe support. So add NVMe to
boot targets.

Signed-off-by: Pali Rohár <pali@kernel.org>
---
 include/configs/turris_omnia.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/configs/turris_omnia.h b/include/configs/turris_omnia.h
index 25aa0d0f9075..99e39531509f 100644
--- a/include/configs/turris_omnia.h
+++ b/include/configs/turris_omnia.h
@@ -56,6 +56,7 @@
 
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 0) \
+	func(NVME, nvme, 0) \
 	func(SCSI, scsi, 0) \
 	func(USB, usb, 0) \
 	func(PXE, pxe, na) \
-- 
2.20.1

[PATCH 5/5] arm: mvebu: turris_mox: Add NVMe and SCSI to boot targets

[Pali Rohár]

U-Boot for Turris Mox has already enabled NVMe and SCSI support. So add
NVMe and SCSI to boot targets.

Signed-off-by: Pali Rohár <pali@kernel.org>
---
 include/configs/turris_mox.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/configs/turris_mox.h b/include/configs/turris_mox.h
index 3cfad7cca985..69f295b5cefe 100644
--- a/include/configs/turris_mox.h
+++ b/include/configs/turris_mox.h
@@ -28,6 +28,8 @@
 
 #define BOOT_TARGET_DEVICES(func) \
 	func(MMC, mmc, 0) \
+	func(NVME, nvme, 0) \
+	func(SCSI, scsi, 0) \
 	func(USB, usb, 0) \
 	func(PXE, pxe, na) \
 	func(DHCP, dhcp, na)
-- 
2.20.1

Re: [PATCH 1/5] arm: mvebu: turris_omnia: Fix RESET button message

[Marek Behún]

On Wed,  6 Apr 2022 11:39:32 +0200
Pali Rohár <pali@kernel.org> wrote:

> Signed-off-by: Pali Rohár <pali@kernel.org>

nitpick: if you don't have anything to say in commit message, don't
leave it empty. At least copy the commit title.

Reviewed-by: Marek Behún <marek.behun@nic.cz>

Re: [PATCH 2/5] arm: mvebu: turris_omnia: Define CONFIG_ETHPRIME instead of ethact= ENV

[Marek Behún]

On Wed,  6 Apr 2022 11:39:33 +0200
Pali Rohár <pali@kernel.org> wrote:

> CONFIG_ETHPRIME defines primary ethernet device and env variable $ethact
> stores currently active ethernet device.
> 
> So there is no point to set ethact= in default environment. Instead set
> CONFIG_ETHPRIME properly.
> 
> Signed-off-by: Pali Rohár <pali@kernel.org>

Reviewed-by: Marek Behún <marek.behun@nic.cz>

Re: [PATCH 3/5] arm: mvebu: turris_omnia: Always enable MMC, SCSI and USB boot targets

[Marek Behún]

[-- Attachment #1: Type: text/plain, Size: 432 bytes --]

On Wed,  6 Apr 2022 11:39:34 +0200
Pali Rohár <pali@kernel.org> wrote:

> U-Boot for Turris Omnia is always compiled with MMC, SCSI and USB support,
> so always enable macros for booting from these devices.

This is not true. Attaching config where scsi is disabled.

If we want to enforce MMC, SCSI and USB, we should add
  select MMC
and others to Kconfig under TURRIS_OMNIA. But do we want to enfore
these?

Marek

[-- Attachment #2: omnia_config_no_scsi --]
[-- Type: application/octet-stream, Size: 47955 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# U-Boot 2022.04-rc5 Configuration
#

#
# Compiler: armv7a-hardfloat-linux-gnueabi-gcc (Gentoo Hardened 11.2.1_p20220115 p4) 11.2.1 20220115
#
CONFIG_CREATE_ARCH_SYMLINK=y
CONFIG_SYS_CACHE_SHIFT_6=y
CONFIG_SYS_CACHELINE_SIZE=64
CONFIG_LINKER_LIST_ALIGN=4
# CONFIG_ARC is not set
CONFIG_ARM=y
# CONFIG_M68K is not set
# CONFIG_MICROBLAZE is not set
# CONFIG_MIPS is not set
# CONFIG_NDS32 is not set
# CONFIG_NIOS2 is not set
# CONFIG_PPC is not set
# CONFIG_RISCV is not set
# CONFIG_SANDBOX is not set
# CONFIG_SH is not set
# CONFIG_X86 is not set
# CONFIG_XTENSA is not set
CONFIG_SYS_ARCH="arm"
CONFIG_SYS_CPU="armv7"
CONFIG_SYS_SOC="mvebu"
CONFIG_SYS_VENDOR="CZ.NIC"
CONFIG_SYS_BOARD="turris_omnia"
CONFIG_SYS_CONFIG_NAME="turris_omnia"
# CONFIG_SKIP_LOWLEVEL_INIT is not set
CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
# CONFIG_TPL_SKIP_LOWLEVEL_INIT is not set
# CONFIG_SKIP_LOWLEVEL_INIT_ONLY is not set
# CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY is not set
# CONFIG_SYS_ICACHE_OFF is not set
# CONFIG_SPL_SYS_ICACHE_OFF is not set
# CONFIG_SYS_DCACHE_OFF is not set
# CONFIG_SPL_SYS_DCACHE_OFF is not set

#
# ARM architecture
#
# CONFIG_POSITION_INDEPENDENT is not set
# CONFIG_GIC_V3_ITS is not set
CONFIG_HAS_VBAR=y
CONFIG_HAS_THUMB2=y
CONFIG_GPIO_EXTRA_HEADER=y
CONFIG_ARM_ASM_UNIFIED=y
CONFIG_SYS_ARM_CACHE_CP15=y
CONFIG_SYS_ARM_MMU=y
# CONFIG_SYS_ARM_MPU is not set
CONFIG_CPU_V7A=y
CONFIG_SYS_ARM_ARCH=7
CONFIG_SYS_ARM_CACHE_WRITEBACK=y
# CONFIG_SYS_ARM_CACHE_WRITETHROUGH is not set
# CONFIG_SYS_ARM_CACHE_WRITEALLOC is not set
CONFIG_ARCH_CPU_INIT=y
# CONFIG_SYS_ARCH_TIMER is not set
# CONFIG_ARM_SMCCC is not set
# CONFIG_SEMIHOSTING is not set
# CONFIG_SYS_THUMB_BUILD is not set
CONFIG_SPL_SYS_THUMB_BUILD=y
# CONFIG_SYS_L2CACHE_OFF is not set
# CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK is not set
CONFIG_USE_ARCH_MEMCPY=y
CONFIG_SPL_USE_ARCH_MEMCPY=y
CONFIG_USE_ARCH_MEMSET=y
CONFIG_SPL_USE_ARCH_MEMSET=y
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_KIRKWOOD is not set
CONFIG_ARCH_MVEBU=y
# CONFIG_ARCH_ORION5X is not set
# CONFIG_TARGET_STV0991 is not set
# CONFIG_ARCH_BCM283X is not set
# CONFIG_ARCH_BCM63158 is not set
# CONFIG_ARCH_BCM68360 is not set
# CONFIG_ARCH_BCM6858 is not set
# CONFIG_ARCH_BCMSTB is not set
# CONFIG_TARGET_VEXPRESS_CA9X4 is not set
# CONFIG_TARGET_BCMCYGNUS is not set
# CONFIG_TARGET_BCMNS2 is not set
# CONFIG_TARGET_BCMNS3 is not set
# CONFIG_ARCH_EXYNOS is not set
# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_HIGHBANK is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IPQ40XX is not set
# CONFIG_ARCH_KEYSTONE is not set
# CONFIG_ARCH_K3 is not set
# CONFIG_ARCH_OMAP2PLUS is not set
# CONFIG_ARCH_MESON is not set
# CONFIG_ARCH_MEDIATEK is not set
# CONFIG_ARCH_LPC32XX is not set
# CONFIG_ARCH_IMX8 is not set
# CONFIG_ARCH_IMX8M is not set
# CONFIG_ARCH_IMX8ULP is not set
# CONFIG_ARCH_IMXRT is not set
# CONFIG_ARCH_MX23 is not set
# CONFIG_ARCH_MX28 is not set
# CONFIG_ARCH_MX31 is not set
# CONFIG_ARCH_MX7ULP is not set
# CONFIG_ARCH_MX7 is not set
# CONFIG_ARCH_MX6 is not set
CONFIG_SPL_LDSCRIPT="arch/$(ARCH)/cpu/u-boot-spl.lds"
# CONFIG_ARCH_MX5 is not set
# CONFIG_ARCH_NEXELL is not set
# CONFIG_ARCH_APPLE is not set
# CONFIG_ARCH_OWL is not set
# CONFIG_ARCH_QEMU is not set
# CONFIG_ARCH_RMOBILE is not set
# CONFIG_ARCH_SNAPDRAGON is not set
# CONFIG_ARCH_SOCFPGA is not set
# CONFIG_ARCH_SUNXI is not set
# CONFIG_ARCH_U8500 is not set
# CONFIG_ARCH_VERSAL is not set
# CONFIG_ARCH_VF610 is not set
# CONFIG_ARCH_ZYNQ is not set
# CONFIG_ARCH_ZYNQMP_R5 is not set
# CONFIG_ARCH_ZYNQMP is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_TARGET_VEXPRESS64_AEMV8A is not set
# CONFIG_TARGET_VEXPRESS64_BASE_FVP is not set
# CONFIG_TARGET_VEXPRESS64_JUNO is not set
# CONFIG_TARGET_TOTAL_COMPUTE is not set
# CONFIG_TARGET_LS2080A_EMU is not set
# CONFIG_TARGET_LS1088AQDS is not set
# CONFIG_TARGET_LS2080AQDS is not set
# CONFIG_TARGET_LS2080ARDB is not set
# CONFIG_TARGET_LS2081ARDB is not set
# CONFIG_TARGET_LX2160ARDB is not set
# CONFIG_TARGET_LX2160AQDS is not set
# CONFIG_TARGET_LX2162AQDS is not set
# CONFIG_TARGET_HIKEY is not set
# CONFIG_TARGET_HIKEY960 is not set
# CONFIG_TARGET_POPLAR is not set
# CONFIG_TARGET_LS1012AQDS is not set
# CONFIG_TARGET_LS1012ARDB is not set
# CONFIG_TARGET_LS1012A2G5RDB is not set
# CONFIG_TARGET_LS1012AFRWY is not set
# CONFIG_TARGET_LS1012AFRDM is not set
# CONFIG_TARGET_LS1028AQDS is not set
# CONFIG_TARGET_LS1028ARDB is not set
# CONFIG_TARGET_LS1088ARDB is not set
# CONFIG_TARGET_LS1021AQDS is not set
# CONFIG_TARGET_LS1021ATWR is not set
# CONFIG_TARGET_PG_WCOM_SELI8 is not set
# CONFIG_TARGET_PG_WCOM_EXPU1 is not set
# CONFIG_TARGET_LS1021ATSN is not set
# CONFIG_TARGET_LS1021AIOT is not set
# CONFIG_TARGET_LS1043AQDS is not set
# CONFIG_TARGET_LS1043ARDB is not set
# CONFIG_TARGET_LS1046AQDS is not set
# CONFIG_TARGET_LS1046ARDB is not set
# CONFIG_TARGET_LS1046AFRWY is not set
# CONFIG_TARGET_SL28 is not set
# CONFIG_TARGET_TEN64 is not set
# CONFIG_TARGET_COLIBRI_PXA270 is not set
# CONFIG_ARCH_UNIPHIER is not set
# CONFIG_ARCH_SYNQUACER is not set
# CONFIG_ARCH_STM32 is not set
# CONFIG_ARCH_STI is not set
# CONFIG_ARCH_STM32MP is not set
# CONFIG_ARCH_ROCKCHIP is not set
# CONFIG_ARCH_OCTEONTX is not set
# CONFIG_ARCH_OCTEONTX2 is not set
# CONFIG_TARGET_THUNDERX_88XX is not set
# CONFIG_ARCH_ASPEED is not set
# CONFIG_TARGET_DURIAN is not set
# CONFIG_TARGET_PRESIDIO_ASIC is not set
# CONFIG_TARGET_XENGUEST_ARM64 is not set
# CONFIG_SUPPORT_PASSING_ATAGS is not set
# CONFIG_STATIC_MACH_TYPE is not set
CONFIG_SYS_KWD_CONFIG="arch/arm/mach-mvebu/kwbimage.cfg"
CONFIG_SYS_TEXT_BASE=0x00800000
CONFIG_SYS_MALLOC_LEN=0x400000
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_SPL_GPIO=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_SYS_MEMTEST_START=0x00800000
CONFIG_SYS_MEMTEST_END=0x00ffffff
CONFIG_HAVE_MVEBU_EFUSE=y
CONFIG_ARMADA_32BIT=y
CONFIG_ARMADA_38X=y
CONFIG_ARMADA_38X_HS_IMPEDANCE_THRESH=0x6
CONFIG_SYS_MVEBU_PLL_CLOCK=1000000000
CONFIG_88F6820=y
# CONFIG_TARGET_CLEARFOG is not set
# CONFIG_TARGET_HELIOS4 is not set
# CONFIG_TARGET_MVEBU_ARMADA_37XX is not set
# CONFIG_TARGET_DB_88F6720 is not set
# CONFIG_TARGET_DB_88F6820_GP is not set
# CONFIG_TARGET_DB_88F6820_AMC is not set
CONFIG_TARGET_TURRIS_OMNIA=y
# CONFIG_TARGET_TURRIS_MOX is not set
# CONFIG_TARGET_MVEBU_ARMADA_8K is not set
# CONFIG_TARGET_OCTEONTX2_CN913x is not set
# CONFIG_TARGET_DB_MV784MP_GP is not set
# CONFIG_TARGET_DS414 is not set
# CONFIG_TARGET_MAXBCM is not set
# CONFIG_TARGET_THEADORABLE is not set
# CONFIG_TARGET_CONTROLCENTERDC is not set
# CONFIG_TARGET_X530 is not set
# CONFIG_TARGET_DB_XC3_24G4XG is not set
# CONFIG_TARGET_CRS3XX_98DX3236 is not set
CONFIG_DDR_RESET_ON_TRAINING_FAILURE=y
CONFIG_MVEBU_SPL_BOOT_DEVICE_SPI=y
# CONFIG_MVEBU_SPL_BOOT_DEVICE_MMC is not set
# CONFIG_MVEBU_SPL_BOOT_DEVICE_SATA is not set
# CONFIG_MVEBU_SPL_BOOT_DEVICE_UART is not set
# CONFIG_MVEBU_EFUSE is not set
# CONFIG_SECURED_MODE_IMAGE is not set
CONFIG_ENV_SIZE=0x10000
CONFIG_ENV_OFFSET=0xF0000
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_DM_GPIO=y
CONFIG_SPL_DM_SPI=y
CONFIG_DEFAULT_DEVICE_TREE="armada-385-turris-omnia"
CONFIG_SPL_TEXT_BASE=0x40000030
CONFIG_MULTI_DTB_FIT_UNCOMPRESS_SZ=0x8000
# CONFIG_SPL_MMC is not set
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
CONFIG_ERR_PTR_OFFSET=0x0
CONFIG_SPL_SIZE_LIMIT=0x0
CONFIG_SPL=y
CONFIG_BOOTSTAGE_STASH_ADDR=0
# CONFIG_DEBUG_UART_BOARD_INIT is not set
CONFIG_DEBUG_UART_BASE=0xd0012000
CONFIG_DEBUG_UART_CLOCK=250000000
CONFIG_IDENT_STRING=""
CONFIG_SYS_CLK_FREQ=0
# CONFIG_CHIP_DIP_SCAN is not set
# CONFIG_SPL_FS_FAT is not set
# CONFIG_SPL_LIBDISK_SUPPORT is not set
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
# CONFIG_ARMV7_LPAE is not set
# CONFIG_CMD_DEKBLOB is not set
# CONFIG_IMX_CAAM_DEK_ENCAP is not set
# CONFIG_IMX_OPTEE_DEK_ENCAP is not set
# CONFIG_IMX_SECO_DEK_ENCAP is not set
# CONFIG_CMD_HDMIDETECT is not set
CONFIG_IMX_DCD_ADDR=0x00910000
# CONFIG_SPL_LOAD_IMX_CONTAINER is not set
CONFIG_IMX_CONTAINER_CFG=""

#
# ARM debug
#
# CONFIG_DEBUG_LL is not set
CONFIG_SPL_PAYLOAD="u-boot.bin"
CONFIG_BUILD_TARGET="u-boot-spl.kwb"
# CONFIG_SYS_PCI_64BIT is not set
CONFIG_DEBUG_UART=y
# CONFIG_AHCI is not set
CONFIG_OF_BOARD_FIXUP=y

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=110201
CONFIG_CLANG_VERSION=0
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_SPL_OPTIMIZE_INLINING is not set
CONFIG_ARCH_SUPPORTS_LTO=y
# CONFIG_LTO is not set
CONFIG_CC_HAS_ASM_INLINE=y
# CONFIG_XEN is not set
CONFIG_DISTRO_DEFAULTS=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
# CONFIG_SYS_BOOT_GET_CMDLINE is not set
# CONFIG_SYS_BOOT_GET_KBD is not set
CONFIG_SYS_MALLOC_F=y
CONFIG_EXPERT=y
CONFIG_SYS_MALLOC_CLEAR_ON_INIT=y
# CONFIG_SYS_MALLOC_DEFAULT_TO_INIT is not set
# CONFIG_TOOLS_DEBUG is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPL_IMAGE="spl/u-boot-spl.bin"
# CONFIG_REMAKE_ELF is not set
# CONFIG_SYS_CUSTOM_LDSCRIPT is not set
CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_PLATFORM_ELFENTRY="_start"
CONFIG_STACK_SIZE=0x1000000
CONFIG_SYS_SRAM_BASE=0x0
CONFIG_SYS_SRAM_SIZE=0x0
# CONFIG_MP is not set
# CONFIG_EXAMPLES is not set

#
# API
#
# CONFIG_API is not set

#
# Boot options
#

#
# Boot images
#
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_FIT=y
CONFIG_TIMESTAMP=y
CONFIG_FIT_EXTERNAL_OFFSET=0x0
CONFIG_FIT_FULL_CHECK=y
# CONFIG_FIT_SIGNATURE is not set
# CONFIG_FIT_CIPHER is not set
CONFIG_FIT_VERBOSE=y
# CONFIG_FIT_BEST_MATCH is not set
CONFIG_FIT_PRINT=y
# CONFIG_SPL_FIT is not set
# CONFIG_SPL_FIT_FULL_CHECK is not set
# CONFIG_SPL_LOAD_FIT is not set
# CONFIG_SPL_LOAD_FIT_FULL is not set
# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_LEGACY_IMAGE_FORMAT=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_OF_BOARD_SETUP=y
# CONFIG_OF_SYSTEM_SETUP is not set
# CONFIG_OF_STDOUT_VIA_ALIAS is not set
CONFIG_SYS_EXTRA_OPTIONS=""
CONFIG_HAVE_SYS_TEXT_BASE=y
# CONFIG_DYNAMIC_SYS_CLK_FREQ is not set
CONFIG_ARCH_FIXUP_FDT_MEMORY=y
# CONFIG_CHROMEOS is not set
# CONFIG_CHROMEOS_VBOOT is not set
# CONFIG_RAMBOOT_PBL is not set

#
# Boot timing
#
# CONFIG_BOOTSTAGE is not set
CONFIG_BOOTSTAGE_STASH_SIZE=0x1000
# CONFIG_SHOW_BOOT_PROGRESS is not set
# CONFIG_SPL_SHOW_BOOT_PROGRESS is not set

#
# Boot media
#
# CONFIG_NAND_BOOT is not set
# CONFIG_ONENAND_BOOT is not set
# CONFIG_QSPI_BOOT is not set
# CONFIG_SATA_BOOT is not set
# CONFIG_SD_BOOT is not set
# CONFIG_SD_BOOT_QSPI is not set
# CONFIG_SPI_BOOT is not set

#
# Autoboot options
#
CONFIG_AUTOBOOT=y
CONFIG_BOOTDELAY=3
# CONFIG_AUTOBOOT_KEYED is not set
# CONFIG_AUTOBOOT_USE_MENUKEY is not set
# CONFIG_USE_BOOTARGS is not set
# CONFIG_BOOTARGS_SUBST is not set
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="run distro_bootcmd"
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT=""
CONFIG_DEFAULT_FDT_FILE=""

#
# Console
#
CONFIG_MENU=y
# CONFIG_CONSOLE_RECORD is not set
# CONFIG_DISABLE_CONSOLE is not set
CONFIG_LOGLEVEL=4
CONFIG_SPL_LOGLEVEL=4
CONFIG_TPL_LOGLEVEL=4
# CONFIG_SILENT_CONSOLE is not set
# CONFIG_PRE_CONSOLE_BUFFER is not set
# CONFIG_CONSOLE_MUX is not set
# CONFIG_SYS_CONSOLE_IS_IN_ENV is not set
# CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE is not set
# CONFIG_SYS_CONSOLE_ENV_OVERWRITE is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_SYS_STDIO_DEREGISTER is not set
# CONFIG_SPL_SYS_STDIO_DEREGISTER is not set
# CONFIG_SYS_DEVICE_NULLDEV is not set

#
# Logging
#
# CONFIG_LOG is not set

#
# Init options
#
# CONFIG_BOARD_TYPES is not set
CONFIG_DISPLAY_CPUINFO=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y

#
# Start-up hooks
#
# CONFIG_ARCH_EARLY_INIT_R is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_EARLY_INIT_F=y
# CONFIG_BOARD_EARLY_INIT_R is not set
CONFIG_BOARD_LATE_INIT=y
# CONFIG_LAST_STAGE_INIT is not set
# CONFIG_MISC_INIT_F is not set
CONFIG_MISC_INIT_R=y
# CONFIG_ID_EEPROM is not set
# CONFIG_PCI_INIT_R is not set

#
# Security support
#
CONFIG_HASH=y
# CONFIG_STACKPROTECTOR is not set

#
# Update support
#
# CONFIG_UPDATE_TFTP is not set
# CONFIG_ANDROID_AB is not set

#
# Blob list
#
# CONFIG_BLOBLIST is not set

#
# SPL / TPL
#
CONFIG_SUPPORT_SPL=y
CONFIG_SPL_FRAMEWORK=y
# CONFIG_SPL_FRAMEWORK_BOARD_INIT_F is not set
CONFIG_SPL_SYS_STACK_F_CHECK_BYTE=0xaa
# CONFIG_SPL_SYS_REPORT_STACK_F_USAGE is not set
# CONFIG_SPL_SHOW_ERRORS is not set

#
# PowerPC and LayerScape SPL Boot options
#
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_BOOTROM_SUPPORT=y
CONFIG_SPL_RAW_IMAGE_SUPPORT=y
CONFIG_SPL_LEGACY_IMAGE_SUPPORT=y
# CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK is not set
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
# CONFIG_SPL_STACK_R is not set
# CONFIG_SPL_SEPARATE_BSS is not set
CONFIG_SPL_BANNER_PRINT=y
# CONFIG_SPL_EARLY_BSS is not set
# CONFIG_SPL_DISPLAY_PRINT is not set
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x0
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET=0x0
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION is not set
CONFIG_SPL_CRC32=y
# CONFIG_SPL_MD5 is not set
# CONFIG_SPL_CACHE is not set
# CONFIG_SPL_CPU is not set
# CONFIG_SPL_CRYPTO is not set
# CONFIG_SPL_DMA is not set
# CONFIG_SPL_ENV_SUPPORT is not set
# CONFIG_SPL_FS_EXT4 is not set
# CONFIG_SPL_FS_SQUASHFS is not set
# CONFIG_SPL_FAT_WRITE is not set
# CONFIG_SPL_FPGA is not set
CONFIG_SPL_I2C=y
# CONFIG_SPL_DM_MAILBOX is not set
CONFIG_SYS_MMCSD_FS_BOOT_PARTITION=1
# CONFIG_SPL_MPC8XXX_INIT_DDR is not set
# CONFIG_SPL_MTD_SUPPORT is not set
# CONFIG_SPL_MUSB_NEW is not set
# CONFIG_SPL_NAND_SUPPORT is not set
# CONFIG_SPL_NAND_DRIVERS is not set
# CONFIG_SPL_NAND_ECC is not set
# CONFIG_SPL_NAND_SIMPLE is not set
# CONFIG_SPL_UBI is not set
CONFIG_SPL_DM_SPI_FLASH=y
# CONFIG_SPL_NET is not set
# CONFIG_SPL_NO_CPU_SUPPORT is not set
# CONFIG_SPL_NOR_SUPPORT is not set
# CONFIG_SPL_XIP_SUPPORT is not set
# CONFIG_SPL_ONENAND_SUPPORT is not set
# CONFIG_SPL_OS_BOOT is not set
# CONFIG_SPL_PCI is not set
# CONFIG_SPL_PCH is not set
# CONFIG_SPL_POST_MEM_SUPPORT is not set
# CONFIG_SPL_DM_RESET is not set
# CONFIG_SPL_POWER is not set
# CONFIG_SPL_POWER_DOMAIN is not set
# CONFIG_SPL_RAM_SUPPORT is not set
# CONFIG_SPL_REMOTEPROC is not set
# CONFIG_SPL_RTC is not set
# CONFIG_SPL_SATA is not set
CONFIG_SPL_SPI_FLASH_TINY=y
# CONFIG_SPL_SPI_FLASH_MTD is not set
CONFIG_SPL_SPI_LOAD=y
CONFIG_SYS_SPI_U_BOOT_OFFS=0x0
# CONFIG_SPL_THERMAL is not set
# CONFIG_SPL_USB_HOST is not set
# CONFIG_SPL_USB_GADGET is not set
# CONFIG_SPL_WATCHDOG is not set
# CONFIG_SPL_YMODEM_SUPPORT is not set
# CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC is not set
# CONFIG_SPL_OPTEE_IMAGE is not set
# CONFIG_FDT_SIMPLEFB is not set

#
# Command line interface
#
CONFIG_CMDLINE=y
CONFIG_HUSH_PARSER=y
CONFIG_CMDLINE_EDITING=y
CONFIG_AUTO_COMPLETE=y
CONFIG_SYS_LONGHELP=y
CONFIG_SYS_PROMPT="=> "
CONFIG_SYS_PROMPT_HUSH_PS2="> "
CONFIG_SYS_XTRACE=y

#
# Commands
#

#
# Info commands
#
CONFIG_CMD_BDI=y
# CONFIG_CMD_CONFIG is not set
CONFIG_CMD_CONSOLE=y
# CONFIG_CMD_LICENSE is not set
# CONFIG_CMD_PMC is not set

#
# Boot commands
#
CONFIG_CMD_BOOTD=y
CONFIG_CMD_BOOTM=y
CONFIG_BOOTM_EFI=y
CONFIG_CMD_BOOTZ=y
CONFIG_BOOTM_LINUX=y
CONFIG_BOOTM_NETBSD=y
# CONFIG_BOOTM_OPENRTOS is not set
# CONFIG_BOOTM_OSE is not set
CONFIG_BOOTM_PLAN9=y
CONFIG_BOOTM_RTEMS=y
CONFIG_BOOTM_VXWORKS=y
CONFIG_CMD_BOOTEFI=y
CONFIG_CMD_BOOTEFI_HELLO_COMPILE=y
# CONFIG_CMD_BOOTEFI_HELLO is not set
# CONFIG_CMD_BOOTEFI_SELFTEST is not set
# CONFIG_CMD_BOOTMENU is not set
# CONFIG_CMD_ADTIMG is not set
CONFIG_CMD_ELF=y
CONFIG_CMD_FDT=y
CONFIG_CMD_GO=y
CONFIG_CMD_RUN=y
CONFIG_CMD_IMI=y
# CONFIG_CMD_IMLS is not set
CONFIG_CMD_XIMG=y
# CONFIG_CMD_SPL is not set
# CONFIG_CMD_THOR_DOWNLOAD is not set
# CONFIG_CMD_ZBOOT is not set

#
# Environment commands
#
# CONFIG_CMD_ASKENV is not set
CONFIG_CMD_EXPORTENV=y
CONFIG_CMD_IMPORTENV=y
CONFIG_CMD_EDITENV=y
# CONFIG_CMD_GREPENV is not set
CONFIG_CMD_SAVEENV=y
# CONFIG_CMD_ERASEENV is not set
CONFIG_CMD_ENV_EXISTS=y
# CONFIG_CMD_ENV_CALLBACK is not set
# CONFIG_CMD_ENV_FLAGS is not set
# CONFIG_CMD_NVEDIT_EFI is not set
# CONFIG_CMD_NVEDIT_INFO is not set
# CONFIG_CMD_NVEDIT_LOAD is not set
# CONFIG_CMD_NVEDIT_SELECT is not set

#
# Memory commands
#
# CONFIG_CMD_BINOP is not set
# CONFIG_CMD_BLOBLIST is not set
CONFIG_CMD_CRC32=y
# CONFIG_CRC32_VERIFY is not set
# CONFIG_CMD_EEPROM is not set
CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=0
# CONFIG_LOOPW is not set
# CONFIG_CMD_MD5SUM is not set
# CONFIG_CMD_MEMINFO is not set
CONFIG_CMD_MEMORY=y
# CONFIG_CMD_MEM_SEARCH is not set
# CONFIG_CMD_MX_CYCLIC is not set
CONFIG_CMD_RANDOM=y
CONFIG_CMD_MEMTEST=y
CONFIG_SYS_ALT_MEMTEST=y
CONFIG_SYS_ALT_MEMTEST_BITFLIP=y
CONFIG_CMD_SHA1SUM=y
# CONFIG_SHA1SUM_VERIFY is not set
# CONFIG_CMD_STRINGS is not set

#
# Compression commands
#
CONFIG_CMD_LZMADEC=y
# CONFIG_CMD_UNLZ4 is not set
# CONFIG_CMD_UNZIP is not set
# CONFIG_CMD_ZIP is not set

#
# Device access commands
#
# CONFIG_CMD_ARMFLASH is not set
# CONFIG_CMD_ADC is not set
# CONFIG_CMD_BCB is not set
# CONFIG_CMD_BIND is not set
# CONFIG_CMD_CLK is not set
# CONFIG_CMD_DEMO is not set
# CONFIG_CMD_DFU is not set
CONFIG_CMD_DM=y
CONFIG_CMD_FLASH=y
# CONFIG_CMD_FPGAD is not set
# CONFIG_CMD_FUSE is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_RANDOM_UUID=y
# CONFIG_CMD_GPT_RENAME is not set
# CONFIG_CMD_IDE is not set
# CONFIG_CMD_IO is not set
# CONFIG_CMD_IOTRACE is not set
CONFIG_CMD_I2C=y
CONFIG_CMD_LOADB=y
CONFIG_CMD_LOADS=y
# CONFIG_CMD_LSBLK is not set
# CONFIG_CMD_MBR is not set
# CONFIG_CMD_MISC is not set
CONFIG_CMD_MMC=y
# CONFIG_CMD_BKOPS_ENABLE is not set
# CONFIG_CMD_MMC_SWRITE is not set
# CONFIG_CMD_CLONE is not set
CONFIG_CMD_MTD=y
CONFIG_CMD_NVME=y
# CONFIG_CMD_ONENAND is not set
# CONFIG_CMD_OSD is not set
CONFIG_CMD_PART=y
CONFIG_CMD_PCI=y
# CONFIG_CMD_POWEROFF is not set
# CONFIG_CMD_READ is not set
# CONFIG_CMD_SATA is not set
# CONFIG_CMD_SAVES is not set
# CONFIG_CMD_SCSI is not set
# CONFIG_CMD_SDRAM is not set
CONFIG_CMD_SF=y
# CONFIG_CMD_SF_TEST is not set
CONFIG_CMD_SPI=y
CONFIG_DEFAULT_SPI_BUS=0
CONFIG_DEFAULT_SPI_MODE=0
# CONFIG_CMD_TSI148 is not set
# CONFIG_CMD_UNIVERSE is not set
CONFIG_CMD_USB=y
# CONFIG_CMD_USB_SDP is not set
CONFIG_CMD_WDT=y

#
# Shell scripting commands
#
CONFIG_CMD_ECHO=y
CONFIG_CMD_ITEST=y
CONFIG_CMD_SOURCE=y
CONFIG_CMD_SETEXPR=y
# CONFIG_CMD_SETEXPR_FMT is not set

#
# Android support commands
#
CONFIG_CMD_NET=y
CONFIG_CMD_BOOTP=y
CONFIG_CMD_DHCP=y
CONFIG_BOOTP_BOOTPATH=y
CONFIG_BOOTP_DNS=y
# CONFIG_BOOTP_DNS2 is not set
CONFIG_BOOTP_GATEWAY=y
CONFIG_BOOTP_HOSTNAME=y
# CONFIG_BOOTP_PREFER_SERVERIP is not set
CONFIG_BOOTP_SUBNETMASK=y
# CONFIG_BOOTP_NTPSERVER is not set
# CONFIG_CMD_PCAP is not set
CONFIG_BOOTP_PXE=y
CONFIG_BOOTP_PXE_CLIENTARCH=0x15
CONFIG_BOOTP_VCI_STRING="U-Boot.armv7"
CONFIG_CMD_TFTPBOOT=y
CONFIG_CMD_TFTPPUT=y
# CONFIG_CMD_TFTPSRV is not set
CONFIG_NET_TFTP_VARS=y
# CONFIG_CMD_RARP is not set
CONFIG_CMD_NFS=y
CONFIG_CMD_MII=y
CONFIG_CMD_MDIO=y
CONFIG_CMD_PING=y
# CONFIG_CMD_CDP is not set
# CONFIG_CMD_SNTP is not set
# CONFIG_CMD_DNS is not set
# CONFIG_CMD_LINK_LOCAL is not set
# CONFIG_CMD_ETHSW is not set
CONFIG_CMD_PXE=y
# CONFIG_CMD_WOL is not set

#
# Misc commands
#
# CONFIG_CMD_BSP is not set
CONFIG_CMD_BLOCK_CACHE=y
CONFIG_CMD_CACHE=y
# CONFIG_CMD_CONITRACE is not set
# CONFIG_CMD_EFIDEBUG is not set
# CONFIG_CMD_EXCEPTION is not set
CONFIG_CMD_DATE=y
# CONFIG_CMD_RTC is not set
CONFIG_CMD_TIME=y
# CONFIG_CMD_GETTIME is not set
CONFIG_CMD_SLEEP=y
# CONFIG_CMD_TIMER is not set
CONFIG_CMD_SYSBOOT=y
# CONFIG_CMD_QFW is not set
# CONFIG_CMD_PSTORE is not set

#
# MVEBU commands
#
# CONFIG_CMD_MVEBU_BUBT is not set
CONFIG_MVEBU_SPI_BOOT=y
CONFIG_MVEBU_UBOOT_DFLT_NAME="flash-image.bin"
# CONFIG_CMD_TERMINAL is not set
# CONFIG_CMD_UUID is not set

#
# TI specific command line interface
#
# CONFIG_CMD_DDR3 is not set

#
# Power commands
#
# CONFIG_CMD_REGULATOR is not set

#
# Security commands
#
CONFIG_CMD_AES=y
# CONFIG_CMD_BLOB is not set
CONFIG_CMD_HASH=y
# CONFIG_HASH_VERIFY is not set

#
# Firmware commands
#

#
# Filesystem commands
#
CONFIG_CMD_BTRFS=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
# CONFIG_CMD_EXT4_WRITE is not set
CONFIG_CMD_FAT=y
# CONFIG_CMD_SQUASHFS is not set
CONFIG_CMD_FS_GENERIC=y
CONFIG_CMD_FS_UUID=y
# CONFIG_CMD_JFFS2 is not set
# CONFIG_CMD_MTDPARTS is not set
CONFIG_MTDIDS_DEFAULT=""
CONFIG_MTDPARTS_DEFAULT=""
# CONFIG_CMD_REISER is not set
# CONFIG_CMD_ZFS is not set

#
# Debug commands
#
# CONFIG_CMD_DIAG is not set
# CONFIG_CMD_LOG is not set
# CONFIG_CMD_UBI is not set
# CONFIG_MMC_SPEED_MODE_SET is not set

#
# Partition Types
#
CONFIG_PARTITIONS=y
# CONFIG_MAC_PARTITION is not set
# CONFIG_SPL_MAC_PARTITION is not set
CONFIG_DOS_PARTITION=y
CONFIG_SPL_DOS_PARTITION=y
CONFIG_ISO_PARTITION=y
# CONFIG_SPL_ISO_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_SPL_AMIGA_PARTITION is not set
CONFIG_EFI_PARTITION=y
CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=128
CONFIG_EFI_PARTITION_ENTRIES_OFF=0
CONFIG_SPL_EFI_PARTITION=y
CONFIG_PARTITION_UUIDS=y
# CONFIG_SPL_PARTITION_UUIDS is not set
# CONFIG_PARTITION_TYPE_GUID is not set
CONFIG_SUPPORT_OF_CONTROL=y

#
# Device Tree Control
#
CONFIG_OF_CONTROL=y
CONFIG_OF_REAL=y
CONFIG_SPL_OF_CONTROL=y
# CONFIG_OF_LIVE is not set
CONFIG_OF_SEPARATE=y
# CONFIG_OF_EMBED is not set
# CONFIG_OF_BOARD is not set
# CONFIG_OF_OMIT_DTB is not set
CONFIG_DEVICE_TREE_INCLUDES=""
CONFIG_OF_LIST="armada-385-turris-omnia"
# CONFIG_MULTI_DTB_FIT is not set
CONFIG_SPL_OF_LIST="armada-385-turris-omnia"
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clocks clock-names interrupt-parent interrupts"
# CONFIG_OF_DTB_PROPS_REMOVE is not set
# CONFIG_SPL_OF_PLATDATA is not set
CONFIG_SPL_OF_REAL=y

#
# Environment
#
CONFIG_ENV_SUPPORT=y
CONFIG_ENV_SOURCE_FILE=""
CONFIG_SAVEENV=y
CONFIG_ENV_OVERWRITE=y
# CONFIG_ENV_IS_NOWHERE is not set
# CONFIG_ENV_IS_IN_EEPROM is not set
# CONFIG_ENV_IS_IN_FAT is not set
# CONFIG_ENV_IS_IN_EXT4 is not set
# CONFIG_ENV_IS_IN_FLASH is not set
# CONFIG_ENV_IS_IN_MMC is not set
# CONFIG_ENV_IS_IN_NAND is not set
# CONFIG_ENV_IS_IN_NVRAM is not set
# CONFIG_ENV_IS_IN_ONENAND is not set
# CONFIG_ENV_IS_IN_REMOTE is not set
CONFIG_ENV_IS_IN_SPI_FLASH=y
# CONFIG_ENV_SECT_SIZE_AUTO is not set
CONFIG_ENV_SPI_BUS=0
CONFIG_ENV_SPI_CS=0
CONFIG_ENV_SPI_MAX_HZ=40000000
CONFIG_ENV_SPI_MODE=0x0
# CONFIG_ENV_SPI_EARLY is not set
# CONFIG_SYS_REDUNDAND_ENVIRONMENT is not set
CONFIG_ENV_ADDR=0x0
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
# CONFIG_USE_DEFAULT_ENV_FILE is not set
# CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG is not set
# CONFIG_ENV_IMPORT_FDT is not set
# CONFIG_ENV_APPEND is not set
# CONFIG_ENV_WRITEABLE_LIST is not set
# CONFIG_ENV_ACCESS_IGNORE_FORCE is not set
# CONFIG_VERSION_VARIABLE is not set
CONFIG_NET=y
# CONFIG_PROT_UDP is not set
# CONFIG_BOOTP_SEND_HOSTNAME is not set
# CONFIG_NET_RANDOM_ETHADDR is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_IP_DEFRAG is not set
CONFIG_TFTP_BLOCKSIZE=1468
CONFIG_TFTP_WINDOWSIZE=1
# CONFIG_TFTP_TSIZE is not set
# CONFIG_SERVERIP_FROM_PROXYDHCP is not set
CONFIG_SERVERIP_FROM_PROXYDHCP_DELAY_MS=100
# CONFIG_KEEP_SERVERADDR is not set
# CONFIG_UDP_CHECKSUM is not set
# CONFIG_BOOTP_SERVERIP is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_DM=y
CONFIG_SPL_DM=y
CONFIG_DM_WARN=y
# CONFIG_SPL_DM_WARN is not set
# CONFIG_DM_DEBUG is not set
CONFIG_DM_DEVICE_REMOVE=y
# CONFIG_SPL_DM_DEVICE_REMOVE is not set
CONFIG_DM_STDIO=y
CONFIG_DM_SEQ_ALIAS=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SPL_DM_INLINE_OFNODE=y
# CONFIG_DM_DMA is not set
# CONFIG_REGMAP is not set
# CONFIG_SPL_REGMAP is not set
# CONFIG_DEVRES is not set
CONFIG_SIMPLE_BUS=y
CONFIG_SPL_SIMPLE_BUS=y
# CONFIG_SIMPLE_BUS_CORRECT_RANGE is not set
CONFIG_OF_TRANSLATE=y
CONFIG_SPL_OF_TRANSLATE=y
CONFIG_TRANSLATION_OFFSET=y
CONFIG_DM_DEV_READ_INLINE=y
# CONFIG_ACPIGEN is not set
# CONFIG_BOUNCE_BUFFER is not set
# CONFIG_ADC is not set
# CONFIG_ADC_EXYNOS is not set
# CONFIG_ADC_SANDBOX is not set
# CONFIG_SARADC_MESON is not set
# CONFIG_SARADC_ROCKCHIP is not set
# CONFIG_SATA is not set
# CONFIG_SCSI_AHCI is not set

#
# SATA/SCSI device support
#
# CONFIG_AXI is not set

#
# Bus devices
#
CONFIG_BLK=y
CONFIG_HAVE_BLOCK_DEVICE=y
CONFIG_SPL_BLK=y
CONFIG_BLOCK_CACHE=y
# CONFIG_SPL_BLOCK_CACHE is not set
# CONFIG_EFI_MEDIA is not set
# CONFIG_IDE is not set
# CONFIG_BOOTCOUNT_LIMIT is not set

#
# Button Support
#
# CONFIG_BUTTON is not set

#
# Cache Controller drivers
#
# CONFIG_CACHE is not set
# CONFIG_L2X0_CACHE is not set
# CONFIG_NCORE_CACHE is not set
# CONFIG_SIFIVE_CCACHE is not set

#
# Clock
#
CONFIG_CLK=y
# CONFIG_SPL_CLK is not set
# CONFIG_SPL_CLK_CCF is not set
# CONFIG_CLK_CCF is not set
# CONFIG_CLK_CDCE9XX is not set
# CONFIG_CLK_ICS8N3QV01 is not set
# CONFIG_CLK_K210 is not set
# CONFIG_CLK_MPC83XX is not set
# CONFIG_CLK_XLNX_CLKWZRD is not set
# CONFIG_CLK_AT91 is not set
# CONFIG_CLK_MVEBU is not set
# CONFIG_CLK_SIFIVE is not set
# CONFIG_CLK_TI_AM3_DPLL is not set
# CONFIG_CLK_TI_CTRL is not set
# CONFIG_CLK_TI_GATE is not set
# CONFIG_CLK_K3 is not set
# CONFIG_SPL_CLK_K3 is not set
# CONFIG_CPU is not set

#
# Hardware crypto devices
#
# CONFIG_DM_HASH is not set
# CONFIG_FSL_CAAM is not set
# CONFIG_SYS_FSL_SEC_BE is not set
# CONFIG_SYS_FSL_SEC_LE is not set
# CONFIG_DDR_SPD is not set

#
# Demo for driver model
#
# CONFIG_DM_DEMO is not set

#
# DFU support
#

#
# DMA Support
#
# CONFIG_DMA is not set
# CONFIG_DMA_LPC32XX is not set
# CONFIG_TI_EDMA3 is not set
# CONFIG_DMA_LEGACY is not set

#
# Fastboot support
#
# CONFIG_UDP_FUNCTION_FASTBOOT is not set
# CONFIG_FIRMWARE is not set
# CONFIG_ZYNQMP_FIRMWARE is not set

#
# FPGA support
#
# CONFIG_FPGA_ALTERA is not set
# CONFIG_FPGA_SOCFPGA is not set
# CONFIG_FPGA_XILINX is not set
CONFIG_GPIO=y
CONFIG_SPL_DM_GPIO=y
# CONFIG_GPIO_HOG is not set
# CONFIG_DM_GPIO_LOOKUP_LABEL is not set
# CONFIG_SPL_DM_GPIO_LOOKUP_LABEL is not set
# CONFIG_ALTERA_PIO is not set
# CONFIG_DWAPB_GPIO is not set
# CONFIG_AT91_GPIO is not set
# CONFIG_ATMEL_PIO4 is not set
# CONFIG_DA8XX_GPIO is not set
# CONFIG_FXL6408_GPIO is not set
# CONFIG_INTEL_BROADWELL_GPIO is not set
# CONFIG_INTEL_GPIO is not set
# CONFIG_INTEL_ICH6_GPIO is not set
# CONFIG_IMX_RGPIO2P is not set
# CONFIG_IPROC_GPIO is not set
# CONFIG_HSDK_CREG_GPIO is not set
# CONFIG_KIRKWOOD_GPIO is not set
# CONFIG_LPC32XX_GPIO is not set
# CONFIG_MAX7320_GPIO is not set
# CONFIG_MCP230XX_GPIO is not set
# CONFIG_MSM_GPIO is not set
# CONFIG_MXC_GPIO is not set
# CONFIG_MXS_GPIO is not set
# CONFIG_CMD_PCA953X is not set
# CONFIG_PCF8575_GPIO is not set
# CONFIG_ROCKCHIP_GPIO is not set
# CONFIG_XILINX_GPIO is not set
# CONFIG_CMD_TCA642X is not set
# CONFIG_TEGRA_GPIO is not set
# CONFIG_TEGRA186_GPIO is not set
# CONFIG_VYBRID_GPIO is not set
# CONFIG_SIFIVE_GPIO is not set
# CONFIG_MVEBU_GPIO is not set
# CONFIG_ZYNQ_GPIO is not set
# CONFIG_DM_74X164 is not set
CONFIG_DM_PCA953X=y
# CONFIG_SPL_DM_PCA953X is not set
# CONFIG_MPC8XXX_GPIO is not set
# CONFIG_NX_GPIO is not set
# CONFIG_NOMADIK_GPIO is not set
# CONFIG_ZYNQMP_GPIO_MODEPIN is not set

#
# Hardware Spinlock Support
#
# CONFIG_DM_HWSPINLOCK is not set
CONFIG_I2C=y
CONFIG_DM_I2C=y
CONFIG_SPL_DM_I2C=y
# CONFIG_I2C_SET_DEFAULT_BUS_NUM is not set
# CONFIG_DM_I2C_GPIO is not set
# CONFIG_SYS_I2C_IPROC is not set
# CONFIG_SYS_I2C_FSL is not set
# CONFIG_SYS_I2C_CADENCE is not set
# CONFIG_SYS_I2C_DW is not set
# CONFIG_SYS_I2C_INTEL is not set
# CONFIG_SYS_I2C_IMX_LPI2C is not set
# CONFIG_SYS_I2C_MICROCHIP is not set
# CONFIG_SYS_I2C_MXC is not set
# CONFIG_SYS_I2C_NEXELL is not set
# CONFIG_SYS_I2C_OCORES is not set
# CONFIG_SYS_I2C_ROCKCHIP is not set
# CONFIG_SYS_I2C_SOFT is not set
# CONFIG_SYS_I2C_MV is not set
CONFIG_SYS_I2C_MVTWSI=y
# CONFIG_SYS_I2C_XILINX_XIIC is not set
# CONFIG_SYS_I2C_IHS is not set
CONFIG_I2C_MUX=y
CONFIG_SPL_I2C_MUX=y
# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
CONFIG_I2C_MUX_PCA954x=y
# CONFIG_I2C_MUX_GPIO is not set
CONFIG_INPUT=y
# CONFIG_SPL_INPUT is not set
# CONFIG_DM_KEYBOARD is not set
# CONFIG_SPL_DM_KEYBOARD is not set
# CONFIG_KEYBOARD is not set
# CONFIG_CROS_EC_KEYB is not set
# CONFIG_TEGRA_KEYBOARD is not set
# CONFIG_TWL4030_INPUT is not set

#
# IOMMU device drivers
#
# CONFIG_IOMMU is not set

#
# LED Support
#
# CONFIG_LED is not set
# CONFIG_SPL_LED is not set
# CONFIG_LED_STATUS is not set

#
# Mailbox Controller Support
#
# CONFIG_DM_MAILBOX is not set

#
# Memory Controller drivers
#

#
# Multifunction device drivers
#
CONFIG_MISC=y
# CONFIG_SPL_MISC is not set
# CONFIG_ALTERA_SYSID is not set
CONFIG_ATSHA204A=y
# CONFIG_ROCKCHIP_EFUSE is not set
# CONFIG_ROCKCHIP_OTP is not set
# CONFIG_SIFIVE_OTP is not set
# CONFIG_VEXPRESS_CONFIG is not set
# CONFIG_CROS_EC is not set
# CONFIG_SPL_CROS_EC is not set
# CONFIG_DS4510 is not set
# CONFIG_FSL_SEC_MON is not set
# CONFIG_IRQ is not set
# CONFIG_NUVOTON_NCT6102D is not set
# CONFIG_PWRSEQ is not set
# CONFIG_PCA9551_LED is not set
# CONFIG_TEST_DRV is not set
# CONFIG_TWL4030_LED is not set
# CONFIG_WINBOND_W83627 is not set
# CONFIG_I2C_EEPROM is not set
# CONFIG_SPL_I2C_EEPROM is not set
# CONFIG_GDSYS_RXAUI_CTRL is not set
# CONFIG_GDSYS_IOEP is not set
# CONFIG_MPC83XX_SERDES is not set
# CONFIG_FS_LOADER is not set
# CONFIG_SPL_FS_LOADER is not set
# CONFIG_GDSYS_SOC is not set
# CONFIG_IHS_FPGA is not set
# CONFIG_MICROCHIP_FLEXCOM is not set
# CONFIG_SL28CPLD is not set

#
# MMC Host controller Support
#
CONFIG_MMC=y
CONFIG_MMC_WRITE=y
# CONFIG_MMC_BROKEN_CD is not set
CONFIG_DM_MMC=y
CONFIG_SPL_DM_MMC=y
# CONFIG_MMC_SPI is not set
# CONFIG_ARM_PL180_MMCI is not set
CONFIG_MMC_QUIRKS=y
CONFIG_MMC_HW_PARTITIONING=y
# CONFIG_SUPPORT_EMMC_RPMB is not set
# CONFIG_SUPPORT_EMMC_BOOT is not set
# CONFIG_MMC_IO_VOLTAGE is not set
# CONFIG_SPL_MMC_IO_VOLTAGE is not set
# CONFIG_MMC_HS400_ES_SUPPORT is not set
# CONFIG_SPL_MMC_HS400_ES_SUPPORT is not set
# CONFIG_MMC_HS400_SUPPORT is not set
# CONFIG_SPL_MMC_HS400_SUPPORT is not set
# CONFIG_MMC_HS200_SUPPORT is not set
# CONFIG_SPL_MMC_HS200_SUPPORT is not set
CONFIG_MMC_VERBOSE=y
# CONFIG_MMC_TRACE is not set
# CONFIG_MMC_DW is not set
# CONFIG_MMC_MXC is not set
# CONFIG_MMC_PCI is not set
# CONFIG_PXA_MMC_GENERIC is not set
# CONFIG_MMC_OMAP_HS is not set
CONFIG_MMC_SDHCI=y
# CONFIG_MMC_SDHCI_SDMA is not set
# CONFIG_MMC_SDHCI_ADMA is not set
# CONFIG_SPL_MMC_SDHCI_ADMA is not set
# CONFIG_MMC_SDHCI_BCMSTB is not set
# CONFIG_MMC_SDHCI_CADENCE is not set
# CONFIG_MMC_SDHCI_IPROC is not set
# CONFIG_MMC_SDHCI_F_SDH30 is not set
# CONFIG_MMC_SDHCI_KONA is not set
# CONFIG_MMC_SDHCI_MSM is not set
CONFIG_MMC_SDHCI_MV=y
# CONFIG_MMC_SDHCI_S5P is not set
# CONFIG_MMC_SDHCI_SPEAR is not set
# CONFIG_MMC_SDHCI_STI is not set
# CONFIG_MMC_SDHCI_XENON is not set
# CONFIG_MMC_SDHCI_TANGIER is not set
# CONFIG_MMC_SDHCI_ZYNQ is not set
# CONFIG_MMC_PITON is not set
# CONFIG_STM32_SDMMC2 is not set
# CONFIG_FTSDC010 is not set
# CONFIG_FSL_ESDHC is not set
# CONFIG_FSL_ESDHC_IMX is not set

#
# MTD Support
#
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD=y
CONFIG_DM_MTD=y
# CONFIG_MTD_NOR_FLASH is not set
# CONFIG_SYS_MTDPARTS_RUNTIME is not set
# CONFIG_FLASH_CFI_DRIVER is not set
# CONFIG_CFI_FLASH is not set
# CONFIG_ALTERA_QSPI is not set
# CONFIG_USE_SYS_MAX_FLASH_BANKS is not set
# CONFIG_MTD_RAW_NAND is not set
# CONFIG_MTD_SPI_NAND is not set

#
# SPI Flash Support
#
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH=y
CONFIG_SF_DEFAULT_BUS=0
CONFIG_SF_DEFAULT_CS=0
CONFIG_SF_DEFAULT_MODE=0x0
CONFIG_SF_DEFAULT_SPEED=40000000
# CONFIG_SPI_FLASH_SFDP_SUPPORT is not set
CONFIG_SPI_FLASH_SMART_HWCAPS=y
# CONFIG_SPI_FLASH_SOFT_RESET is not set
# CONFIG_SPI_FLASH_BAR is not set
CONFIG_SPI_FLASH_UNLOCK_ALL=y
# CONFIG_SPI_FLASH_ATMEL is not set
# CONFIG_SPI_FLASH_EON is not set
# CONFIG_SPI_FLASH_GIGADEVICE is not set
# CONFIG_SPI_FLASH_ISSI is not set
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
# CONFIG_SPI_FLASH_S28HS512T is not set
# CONFIG_SPI_FLASH_STMICRO is not set
# CONFIG_SPI_FLASH_SST is not set
# CONFIG_SPI_FLASH_WINBOND is not set
# CONFIG_SPI_FLASH_XMC is not set
# CONFIG_SPI_FLASH_XTX is not set
CONFIG_SPI_FLASH_USE_4K_SECTORS=y
# CONFIG_SPI_FLASH_DATAFLASH is not set
CONFIG_SPI_FLASH_MTD=y

#
# UBI support
#
# CONFIG_UBI_SILENCE_MSG is not set
# CONFIG_MTD_UBI is not set

#
# Multiplexer drivers
#
# CONFIG_MULTIPLEXER is not set
# CONFIG_BITBANGMII is not set
# CONFIG_MV88E6352_SWITCH is not set
CONFIG_PHYLIB=y
# CONFIG_PHY_ADDR_ENABLE is not set
# CONFIG_B53_SWITCH is not set
# CONFIG_MV88E61XX_SWITCH is not set
# CONFIG_PHYLIB_10G is not set
# CONFIG_PHY_AQUANTIA is not set
# CONFIG_PHY_ATHEROS is not set
# CONFIG_PHY_BROADCOM is not set
# CONFIG_PHY_CORTINA is not set
# CONFIG_PHY_DAVICOM is not set
# CONFIG_PHY_ET1011C is not set
# CONFIG_PHY_LXT is not set
CONFIG_PHY_MARVELL=y
# CONFIG_PHY_MESON_GXL is not set
# CONFIG_PHY_MICREL is not set
# CONFIG_PHY_MSCC is not set
# CONFIG_PHY_NATSEMI is not set
# CONFIG_PHY_NXP_C45_TJA11XX is not set
# CONFIG_PHY_REALTEK is not set
# CONFIG_PHY_SMSC is not set
# CONFIG_PHY_TERANETICS is not set
# CONFIG_PHY_TI is not set
# CONFIG_PHY_TI_DP83867 is not set
# CONFIG_PHY_TI_DP83869 is not set
# CONFIG_PHY_TI_GENERIC is not set
# CONFIG_PHY_VITESSE is not set
# CONFIG_PHY_XILINX is not set
# CONFIG_PHY_XILINX_GMII2RGMII is not set
# CONFIG_PHY_FIXED is not set
# CONFIG_PHY_NCSI is not set
# CONFIG_FSL_PFE is not set
# CONFIG_BNXT_ETH is not set
CONFIG_ETH=y
CONFIG_DM_ETH=y
# CONFIG_DM_MDIO is not set
# CONFIG_DM_ETH_PHY is not set
CONFIG_NETDEVICES=y
CONFIG_PHY_GIGE=y
# CONFIG_ALTERA_TSE is not set
# CONFIG_BCM_SF2_ETH is not set
# CONFIG_BCMGENET is not set
# CONFIG_CALXEDA_XGMAC is not set
# CONFIG_DWC_ETH_QOS is not set
# CONFIG_E1000 is not set
# CONFIG_EEPRO100 is not set
# CONFIG_ETH_DESIGNWARE is not set
# CONFIG_ETH_DESIGNWARE_MESON8B is not set
# CONFIG_ETHOC is not set
# CONFIG_FMAN_ENET is not set
# CONFIG_FTMAC100 is not set
# CONFIG_FTGMAC100 is not set
# CONFIG_MCFFEC is not set
# CONFIG_FSLDMAFEC is not set
# CONFIG_KS8851_MLL is not set
CONFIG_MVNETA=y
# CONFIG_MACB is not set
# CONFIG_PCH_GBE is not set
# CONFIG_RGMII is not set
CONFIG_MII=y
# CONFIG_PCNET is not set
# CONFIG_QE_UEC is not set
# CONFIG_RTL8139 is not set
# CONFIG_RTL8169 is not set
# CONFIG_SMC911X is not set
# CONFIG_SUN7I_GMAC is not set
# CONFIG_SUN4I_EMAC is not set
# CONFIG_SUN8I_EMAC is not set
# CONFIG_SH_ETHER is not set
# CONFIG_DRIVER_TI_CPSW is not set
# CONFIG_DRIVER_TI_EMAC is not set
# CONFIG_DRIVER_TI_KEYSTONE_NET is not set
# CONFIG_TULIP is not set
# CONFIG_XILINX_AXIEMAC is not set
# CONFIG_XILINX_EMACLITE is not set
# CONFIG_ZYNQ_GEM is not set
# CONFIG_SYS_DPAA_QBMAN is not set
# CONFIG_TSEC_ENET is not set
# CONFIG_MEDIATEK_ETH is not set
# CONFIG_HIGMACV300_ETH is not set
CONFIG_NVME=y
# CONFIG_NVME_APPLE is not set
CONFIG_NVME_PCI=y
CONFIG_PCI=y
# CONFIG_DM_PCI_COMPAT is not set
CONFIG_PCI_PNP=y
# CONFIG_PCI_REGION_MULTI_ENTRY is not set
# CONFIG_PCI_SRIOV is not set
# CONFIG_PCI_ARID is not set
# CONFIG_PCIE_ECAM_GENERIC is not set
# CONFIG_PCIE_ECAM_SYNQUACER is not set
# CONFIG_PCI_PHYTIUM is not set
# CONFIG_PCIE_FSL is not set
# CONFIG_PCI_MPC85XX is not set
# CONFIG_PCI_XILINX is not set
# CONFIG_PCIE_LAYERSCAPE_RC is not set
# CONFIG_PCIE_LAYERSCAPE_EP is not set
# CONFIG_PCIE_LAYERSCAPE_GEN4 is not set
# CONFIG_PCIE_INTEL_FPGA is not set
# CONFIG_PCIE_IPROC is not set
CONFIG_PCI_MVEBU=y
# CONFIG_PCI_KEYSTONE is not set

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# CONFIG_X86_PCH7 is not set
# CONFIG_X86_PCH9 is not set

#
# PHY Subsystem
#
# CONFIG_PHY is not set
# CONFIG_SPL_PHY is not set
# CONFIG_MIPI_DPHY_HELPERS is not set

#
# Rockchip PHY driver
#
# CONFIG_PHY_CADENCE_SIERRA is not set
# CONFIG_PHY_CADENCE_TORRENT is not set
# CONFIG_MVEBU_COMPHY_SUPPORT is not set

#
# Pin controllers
#
# CONFIG_PINCTRL is not set
# CONFIG_SPL_PINCTRL is not set
CONFIG_POWER=y
# CONFIG_POWER_LEGACY is not set
# CONFIG_SPL_POWER_LEGACY is not set
# CONFIG_ACPI_PMC is not set
# CONFIG_SPL_ACPI_PMC is not set
# CONFIG_TPL_ACPI_PMC is not set

#
# Power Domain Support
#
# CONFIG_POWER_DOMAIN is not set
# CONFIG_DM_PMIC is not set
# CONFIG_POWER_MC34VR500 is not set
CONFIG_DM_REGULATOR=y
# CONFIG_REGULATOR_PWM is not set
# CONFIG_DM_REGULATOR_FIXED is not set
# CONFIG_DM_REGULATOR_GPIO is not set
# CONFIG_DM_REGULATOR_PBIAS is not set
# CONFIG_DM_REGULATOR_TPS62360 is not set
# CONFIG_DM_REGULATOR_ANATOP is not set
# CONFIG_DM_REGULATOR_SCMI is not set
# CONFIG_POWER_MT6323 is not set
# CONFIG_DM_PWM is not set
# CONFIG_PWM_IMX is not set
# CONFIG_PWM_SANDBOX is not set
# CONFIG_U_QE is not set
# CONFIG_RAM is not set

#
# Reboot Mode Support
#
# CONFIG_DM_REBOOT_MODE is not set

#
# Remote Processor drivers
#

#
# Reset Controller Support
#
CONFIG_DM_RESET=y
# CONFIG_RESET_AST2500 is not set
# CONFIG_RESET_AST2600 is not set
# CONFIG_RESET_HISILICON is not set
# CONFIG_RESET_SYSCON is not set
# CONFIG_RESET_SCMI is not set
# CONFIG_RESET_DRA7 is not set
# CONFIG_DM_RNG is not set

#
# Real Time Clock
#
CONFIG_DM_RTC=y
# CONFIG_SPL_DM_RTC is not set
# CONFIG_RTC_ENABLE_32KHZ_OUTPUT is not set
CONFIG_RTC_ARMADA38X=y
# CONFIG_RTC_PCF2127 is not set
# CONFIG_RTC_DS1307 is not set
# CONFIG_RTC_DS3232 is not set
# CONFIG_RTC_EMULATION is not set
# CONFIG_RTC_ISL1208 is not set
# CONFIG_RTC_PCF8563 is not set
# CONFIG_RTC_RV3028 is not set
# CONFIG_RTC_RV3029 is not set
# CONFIG_RTC_RV8803 is not set
# CONFIG_RTC_RX8010SJ is not set
# CONFIG_RTC_RX8025 is not set
# CONFIG_RTC_PL031 is not set
# CONFIG_RTC_MV is not set
# CONFIG_RTC_S35392A is not set
# CONFIG_RTC_MC146818 is not set
# CONFIG_RTC_M41T62 is not set
# CONFIG_RTC_STM32 is not set
# CONFIG_RTC_ABX80X is not set
# CONFIG_SCSI is not set
# CONFIG_DM_SCSI is not set
CONFIG_SERIAL=y
CONFIG_BAUDRATE=115200
CONFIG_REQUIRE_SERIAL_CONSOLE=y
# CONFIG_SPECIFY_CONSOLE_INDEX is not set
CONFIG_SERIAL_PRESENT=y
CONFIG_SPL_SERIAL_PRESENT=y
CONFIG_DM_SERIAL=y
# CONFIG_SERIAL_RX_BUFFER is not set
# CONFIG_SERIAL_SEARCH_ALL is not set
# CONFIG_SERIAL_PROBE_ALL is not set
CONFIG_SPL_DM_SERIAL=y
CONFIG_DEBUG_UART_NS16550=y
CONFIG_DEBUG_UART_SHIFT=2
# CONFIG_DEBUG_UART_ANNOUNCE is not set
# CONFIG_DEBUG_UART_SKIP_INIT is not set
# CONFIG_DEBUG_UART_NS16550_CHECK_ENABLED is not set
# CONFIG_ALTERA_JTAG_UART is not set
# CONFIG_ALTERA_UART is not set
# CONFIG_ARC_SERIAL is not set
# CONFIG_ARM_DCC is not set
# CONFIG_ATMEL_USART is not set
# CONFIG_BCM6345_SERIAL is not set
# CONFIG_COREBOOT_SERIAL is not set
# CONFIG_CORTINA_UART is not set
# CONFIG_FSL_LINFLEXUART is not set
# CONFIG_FSL_LPUART is not set
# CONFIG_MVEBU_A3700_UART is not set
# CONFIG_MCFUART is not set
# CONFIG_NULLDEV_SERIAL is not set
CONFIG_SYS_NS16550=y
# CONFIG_NS16550_DYNAMIC is not set
# CONFIG_PL01X_SERIAL is not set
# CONFIG_XILINX_UARTLITE is not set
# CONFIG_MSM_SERIAL is not set
# CONFIG_MSM_GENI_SERIAL is not set
# CONFIG_OMAP_SERIAL is not set
# CONFIG_PXA_SERIAL is not set
# CONFIG_SIFIVE_SERIAL is not set
# CONFIG_ZYNQ_SERIAL is not set
# CONFIG_MTK_SERIAL is not set
# CONFIG_MT7620_SERIAL is not set
# CONFIG_SMEM is not set

#
# Sound support
#
# CONFIG_SOUND is not set
# CONFIG_SOUND_MAX98357A is not set

#
# SOC (System On Chip) specific Drivers
#
# CONFIG_SOC_DEVICE is not set
# CONFIG_SOC_TI is not set
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_SPI_MEM=y
# CONFIG_ALTERA_SPI is not set
# CONFIG_APPLE_SPI is not set
# CONFIG_ATCSPI200_SPI is not set
# CONFIG_ATMEL_SPI is not set
# CONFIG_BCMSTB_SPI is not set
# CONFIG_CORTINA_SFLASH is not set
# CONFIG_CADENCE_QSPI is not set
# CONFIG_CF_SPI is not set
# CONFIG_DESIGNWARE_SPI is not set
# CONFIG_EXYNOS_SPI is not set
# CONFIG_FSL_DSPI is not set
# CONFIG_FSL_QSPI is not set
# CONFIG_ICH_SPI is not set
# CONFIG_IPROC_QSPI is not set
CONFIG_KIRKWOOD_SPI=y
# CONFIG_MPC8XXX_SPI is not set
# CONFIG_MTK_SNOR is not set
# CONFIG_MTK_SNFI_SPI is not set
# CONFIG_MVEBU_A3700_SPI is not set
# CONFIG_MXS_SPI is not set
# CONFIG_SPI_MXIC is not set
# CONFIG_NXP_FSPI is not set
# CONFIG_OMAP3_SPI is not set
# CONFIG_PL022_SPI is not set
# CONFIG_ROCKCHIP_SFC is not set
# CONFIG_ROCKCHIP_SPI is not set
# CONFIG_SPI_SIFIVE is not set
# CONFIG_SOFT_SPI is not set
# CONFIG_SPI_SUNXI is not set
# CONFIG_TEGRA114_SPI is not set
# CONFIG_TEGRA20_SFLASH is not set
# CONFIG_TEGRA20_SLINK is not set
# CONFIG_TEGRA210_QSPI is not set
# CONFIG_TI_QSPI is not set
# CONFIG_XILINX_SPI is not set
# CONFIG_ZYNQ_SPI is not set
# CONFIG_ZYNQ_QSPI is not set
# CONFIG_ZYNQMP_GQSPI is not set
# CONFIG_FSL_ESPI is not set
# CONFIG_SH_QSPI is not set
# CONFIG_MXC_SPI is not set

#
# SPMI support
#
# CONFIG_SPMI is not set
# CONFIG_SYSINFO is not set

#
# System reset device drivers
#
# CONFIG_SYSRESET is not set
# CONFIG_TEE is not set
# CONFIG_DM_THERMAL is not set

#
# Timer Support
#
# CONFIG_TIMER is not set

#
# TPM support
#
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_SPL_DM_USB=y
# CONFIG_DM_USB_GADGET is not set
# CONFIG_SPL_DM_USB_GADGET is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_HOST=y
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_DWC3 is not set
# CONFIG_USB_XHCI_DWC3_OF_SIMPLE is not set
CONFIG_USB_XHCI_MVEBU=y
# CONFIG_USB_XHCI_PCI is not set
# CONFIG_USB_XHCI_FSL is not set
# CONFIG_USB_XHCI_BRCM is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_IS_TDI=y
CONFIG_USB_EHCI_MARVELL=y
# CONFIG_USB_EHCI_MSM is not set
# CONFIG_USB_EHCI_PCI is not set
# CONFIG_USB_EHCI_ZYNQ is not set
# CONFIG_USB_EHCI_GENERIC is not set
# CONFIG_USB_EHCI_FSL is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_CDNS3 is not set
# CONFIG_USB_DWC3 is not set

#
# Legacy MUSB Support
#
# CONFIG_USB_MUSB_HCD is not set
# CONFIG_USB_MUSB_UDC is not set

#
# MUSB Controller Driver
#
# CONFIG_USB_MUSB_HOST is not set
# CONFIG_USB_MUSB_PIO_ONLY is not set

#
# USB Phy
#
# CONFIG_TWL4030_USB is not set
# CONFIG_ROCKCHIP_USB2_PHY is not set

#
# ULPI drivers
#

#
# USB peripherals
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_KEYBOARD is not set
# CONFIG_USB_HOST_ETHER is not set
# CONFIG_USB_GADGET is not set

#
# UFS Host Controller Support
#
# CONFIG_TI_J721E_UFS is not set

#
# Graphics support
#
# CONFIG_DM_VIDEO is not set
# CONFIG_SYS_WHITE_ON_BLACK is not set
# CONFIG_NO_FB_CLEAR is not set

#
# TrueType Fonts
#
# CONFIG_VIDEO_VESA is not set
# CONFIG_VIDEO_LCD_ANX9804 is not set
# CONFIG_VIDEO_LCD_SSD2828 is not set
# CONFIG_VIDEO_LCD_HITACHI_TX18D42VM is not set
# CONFIG_VIDEO_MVEBU is not set
# CONFIG_I2C_EDID is not set
# CONFIG_DISPLAY is not set
# CONFIG_ATMEL_HLCD is not set
# CONFIG_AM335X_LCD is not set
# CONFIG_VIDEO_TEGRA20 is not set
# CONFIG_VIDEO_BRIDGE is not set
# CONFIG_VIDEO is not set
# CONFIG_LCD is not set
# CONFIG_VIDEO_SIMPLE is not set
# CONFIG_VIDEO_DT_SIMPLEFB is not set
# CONFIG_OSD is not set
# CONFIG_SPLASH_SCREEN is not set
# CONFIG_VIDEO_VCXK is not set

#
# VirtIO Drivers
#
# CONFIG_VIRTIO_MMIO is not set
# CONFIG_VIRTIO_PCI is not set

#
# 1-Wire support
#
# CONFIG_W1 is not set

#
# 1-wire EEPROM support
#
# CONFIG_W1_EEPROM is not set

#
# Watchdog Timer Support
#
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_AUTOSTART=y
CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
# CONFIG_IMX_WATCHDOG is not set
# CONFIG_ULP_WATCHDOG is not set
# CONFIG_DESIGNWARE_WATCHDOG is not set
CONFIG_WDT=y
# CONFIG_WDT_APPLE is not set
# CONFIG_WDT_ASPEED is not set
# CONFIG_WDT_AST2600 is not set
# CONFIG_WDT_AT91 is not set
# CONFIG_WDT_CDNS is not set
# CONFIG_WDT_CORTINA is not set
# CONFIG_WDT_GPIO is not set
CONFIG_WDT_ORION=y
# CONFIG_WDT_SBSA is not set
# CONFIG_WDT_SP805 is not set
# CONFIG_WDT_STM32MP is not set
# CONFIG_XILINX_TB_WATCHDOG is not set
# CONFIG_SPL_WDT is not set
# CONFIG_PVBLOCK is not set
# CONFIG_PHYS_TO_BUS is not set

#
# File systems
#
CONFIG_FS_BTRFS=y
# CONFIG_FS_CBFS is not set
# CONFIG_SPL_FS_CBFS is not set
CONFIG_FS_EXT4=y
CONFIG_EXT4_WRITE=y
CONFIG_FS_FAT=y
CONFIG_FAT_WRITE=y
CONFIG_FS_FAT_MAX_CLUSTSIZE=65536
# CONFIG_FS_JFFS2 is not set
# CONFIG_UBIFS_SILENCE_MSG is not set
# CONFIG_FS_CRAMFS is not set
# CONFIG_YAFFS2 is not set
# CONFIG_FS_SQUASHFS is not set

#
# Library routines
#
# CONFIG_ADDR_MAP is not set
# CONFIG_PHYSMEM is not set
# CONFIG_BCH is not set
# CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED is not set
CONFIG_CHARSET=y
# CONFIG_DYNAMIC_CRC_TABLE is not set
CONFIG_HAVE_PRIVATE_LIBGCC=y
CONFIG_LIB_UUID=y
CONFIG_PRINTF=y
CONFIG_SPL_PRINTF=y
CONFIG_SPRINTF=y
CONFIG_SPL_SPRINTF=y
CONFIG_STRTO=y
CONFIG_SPL_STRTO=y
CONFIG_USE_PRIVATE_LIBGCC=y
CONFIG_SYS_HZ=1000
CONFIG_SPL_USE_TINY_PRINTF=y
# CONFIG_PANIC_HANG is not set
CONFIG_REGEX=y
CONFIG_LIB_RAND=y
# CONFIG_LIB_HW_RAND is not set
CONFIG_SUPPORT_ACPI=y
# CONFIG_GENERATE_ACPI_TABLE is not set
# CONFIG_SPL_TINY_MEMSET is not set
# CONFIG_TPL_TINY_MEMSET is not set
CONFIG_RBTREE=y
# CONFIG_BITREVERSE is not set
# CONFIG_TRACE is not set
# CONFIG_CIRCBUF is not set
# CONFIG_CMD_DHRYSTONE is not set

#
# Security support
#
CONFIG_AES=y
# CONFIG_ECDSA is not set
# CONFIG_RSA is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
# CONFIG_TPM is not set
# CONFIG_SPL_TPM is not set

#
# Android Verified Boot
#

#
# Hashing Support
#
CONFIG_BLAKE2=y
CONFIG_SHA1=y
CONFIG_SHA256=y
# CONFIG_SHA512 is not set
# CONFIG_SHA384 is not set
# CONFIG_SHA_HW_ACCEL is not set
CONFIG_SPL_SHA1=y
CONFIG_SPL_SHA256=y
# CONFIG_SPL_SHA512 is not set
# CONFIG_SPL_SHA384 is not set
# CONFIG_SPL_SHA_HW_ACCEL is not set
CONFIG_MD5=y
CONFIG_CRC32=y
CONFIG_CRC32C=y
CONFIG_XXHASH=y

#
# Compression Support
#
# CONFIG_LZ4 is not set
CONFIG_LZMA=y
CONFIG_LZO=y
CONFIG_GZIP=y
# CONFIG_ZLIB_UNCOMPRESS is not set
# CONFIG_BZIP2 is not set
CONFIG_ZLIB=y
CONFIG_ZSTD=y
# CONFIG_SPL_LZ4 is not set
# CONFIG_SPL_LZMA is not set
# CONFIG_SPL_LZO is not set
# CONFIG_SPL_GZIP is not set
# CONFIG_SPL_ZSTD is not set
# CONFIG_ERRNO_STR is not set
# CONFIG_HEXDUMP is not set
# CONFIG_GETOPT is not set
CONFIG_OF_LIBFDT=y
CONFIG_OF_LIBFDT_ASSUME_MASK=0
# CONFIG_OF_LIBFDT_OVERLAY is not set
CONFIG_SPL_OF_LIBFDT=y
CONFIG_SPL_OF_LIBFDT_ASSUME_MASK=0xff
# CONFIG_TPL_OF_LIBFDT is not set
CONFIG_TPL_OF_LIBFDT_ASSUME_MASK=0xff

#
# System tables
#
CONFIG_GENERATE_SMBIOS_TABLE=y
# CONFIG_LIB_RATIONAL is not set
# CONFIG_SPL_LIB_RATIONAL is not set
# CONFIG_SMBIOS_PARSER is not set
CONFIG_EFI_LOADER=y
CONFIG_CMD_BOOTEFI_BOOTMGR=y
CONFIG_EFI_VARIABLE_FILE_STORE=y
# CONFIG_EFI_VARIABLES_PRESEED is not set
CONFIG_EFI_VAR_BUF_SIZE=16384
CONFIG_EFI_GET_TIME=y
# CONFIG_EFI_SET_TIME is not set
# CONFIG_EFI_RUNTIME_UPDATE_CAPSULE is not set
# CONFIG_EFI_CAPSULE_ON_DISK is not set
CONFIG_EFI_DEVICE_PATH_TO_TEXT=y
CONFIG_EFI_DEVICE_PATH_UTIL=y
CONFIG_EFI_DT_FIXUP=y
CONFIG_EFI_LOADER_HII=y
CONFIG_EFI_UNICODE_COLLATION_PROTOCOL2=y
CONFIG_EFI_UNICODE_CAPITALIZATION=y
CONFIG_EFI_PLATFORM_LANG_CODES="en-US"
CONFIG_EFI_GRUB_ARM32_WORKAROUND=y
CONFIG_EFI_LOAD_FILE2_INITRD=y
# CONFIG_OPTEE_LIB is not set
# CONFIG_OPTEE_IMAGE is not set
# CONFIG_BOOTM_OPTEE is not set
# CONFIG_TEST_FDTDEC is not set
CONFIG_LIB_DATE=y
CONFIG_LIB_ELF=y
CONFIG_LMB=y
CONFIG_LMB_USE_MAX_REGIONS=y
CONFIG_LMB_MAX_REGIONS=8
# CONFIG_PHANDLE_CHECK_SEQ is not set
# CONFIG_UNIT_TEST is not set
# CONFIG_SPL_UNIT_TEST is not set

#
# Tools options
#
CONFIG_MKIMAGE_DTC_PATH="dtc"
CONFIG_TOOLS_CRC32=y
CONFIG_TOOLS_LIBCRYPTO=y
CONFIG_TOOLS_FIT=y
CONFIG_TOOLS_FIT_FULL_CHECK=y
CONFIG_TOOLS_FIT_PRINT=y
CONFIG_TOOLS_FIT_RSASSA_PSS=y
CONFIG_TOOLS_FIT_SIGNATURE=y
CONFIG_TOOLS_FIT_SIGNATURE_MAX_SIZE=0x10000000
CONFIG_TOOLS_FIT_VERBOSE=y
CONFIG_TOOLS_MD5=y
CONFIG_TOOLS_OF_LIBFDT=y
CONFIG_TOOLS_SHA1=y
CONFIG_TOOLS_SHA256=y
CONFIG_TOOLS_SHA384=y
CONFIG_TOOLS_SHA512=y
# CONFIG_TOOLS_MKEFICAPSULE is not set

Re: [PATCH 4/5] arm: mvebu: turris_omnia: Add NVMe to boot targets

[Marek Behún]

On Wed,  6 Apr 2022 11:39:35 +0200
Pali Rohár <pali@kernel.org> wrote:

> U-Boot for Turris Omnia has already enabled NVMe support. So add NVMe to
> boot targets.

As in my previous message, an user may want to compile U-Boot without
NVMe support. They can do this now with menuconfig. If NVME support is
to be mandatory, it should be enforced in Kconfig.

But I don't think it should be mandatory.

Marek

Re: [PATCH 5/5] arm: mvebu: turris_mox: Add NVMe and SCSI to boot targets

[Marek Behún]

On Wed,  6 Apr 2022 11:39:36 +0200
Pali Rohár <pali@kernel.org> wrote:

> U-Boot for Turris Mox has already enabled NVMe and SCSI support. So add
> NVMe and SCSI to boot targets.
> 
> Signed-off-by: Pali Rohár <pali@kernel.org>

And for MOX I am not sure whether NVME and SCSI can be disabled in
menuconfig. Either we need to update the BOOT_TARET macro or enforce
all of these (MMC, NVME, SCSI, USB, NET) in Kconfig.

Marek

Re: [PATCH 3/5] arm: mvebu: turris_omnia: Always enable MMC, SCSI and USB boot targets

[Pali Rohár]

On Wednesday 06 April 2022 21:31:18 Marek Behún wrote:
> On Wed,  6 Apr 2022 11:39:34 +0200
> Pali Rohár <pali@kernel.org> wrote:
> 
> > U-Boot for Turris Omnia is always compiled with MMC, SCSI and USB support,
> > so always enable macros for booting from these devices.
> 
> This is not true. Attaching config where scsi is disabled.
> 
> If we want to enforce MMC, SCSI and USB, we should add
>   select MMC
> and others to Kconfig under TURRIS_OMNIA. But do we want to enfore
> these?
> 
> Marek

IIRC macro BOOT_TARGET_DEVICES just defines default values for ENV. So
in default ENV would be macros for booting from SCSI, MMC and USB
targets. Which means that if you call saveenv on U-Boot compiled with
all these options and then replace U-Boot with the one without e.g. MMC
support, it does not replace env variables for MMC booting.

Anyway, does not defining e.g. SCSI booting env variables on U-Boot
without SCSI support result in the same state as defining SCSI booting
env variables on U-Boot with SCSI support with disconnected SCSI
controllers or disks? In both cases there would be no SCSI suitable boot
device.

Re: [PATCH 3/5] arm: mvebu: turris_omnia: Always enable MMC, SCSI and USB boot targets

[Pali Rohár]

On Friday 08 April 2022 11:00:24 Pali Rohár wrote:
> On Wednesday 06 April 2022 21:31:18 Marek Behún wrote:
> > On Wed,  6 Apr 2022 11:39:34 +0200
> > Pali Rohár <pali@kernel.org> wrote:
> > 
> > > U-Boot for Turris Omnia is always compiled with MMC, SCSI and USB support,
> > > so always enable macros for booting from these devices.
> > 
> > This is not true. Attaching config where scsi is disabled.
> > 
> > If we want to enforce MMC, SCSI and USB, we should add
> >   select MMC
> > and others to Kconfig under TURRIS_OMNIA. But do we want to enfore
> > these?
> > 
> > Marek
> 
> IIRC macro BOOT_TARGET_DEVICES just defines default values for ENV. So
> in default ENV would be macros for booting from SCSI, MMC and USB
> targets. Which means that if you call saveenv on U-Boot compiled with
> all these options and then replace U-Boot with the one without e.g. MMC
> support, it does not replace env variables for MMC booting.
> 
> Anyway, does not defining e.g. SCSI booting env variables on U-Boot
> without SCSI support result in the same state as defining SCSI booting
> env variables on U-Boot with SCSI support with disconnected SCSI
> controllers or disks? In both cases there would be no SCSI suitable boot
> device.

So, any issues with it?

Re: [PATCH 3/5] arm: mvebu: turris_omnia: Always enable MMC, SCSI and USB boot targets

[Marek Behún]

On Sun, 1 May 2022 16:52:31 +0200
Pali Rohár <pali@kernel.org> wrote:

> On Friday 08 April 2022 11:00:24 Pali Rohár wrote:
> > On Wednesday 06 April 2022 21:31:18 Marek Behún wrote:  
> > > On Wed,  6 Apr 2022 11:39:34 +0200
> > > Pali Rohár <pali@kernel.org> wrote:
> > >   
> > > > U-Boot for Turris Omnia is always compiled with MMC, SCSI and USB support,
> > > > so always enable macros for booting from these devices.  
> > > 
> > > This is not true. Attaching config where scsi is disabled.
> > > 
> > > If we want to enforce MMC, SCSI and USB, we should add
> > >   select MMC
> > > and others to Kconfig under TURRIS_OMNIA. But do we want to enfore
> > > these?
> > > 
> > > Marek  
> > 
> > IIRC macro BOOT_TARGET_DEVICES just defines default values for ENV. So
> > in default ENV would be macros for booting from SCSI, MMC and USB
> > targets. Which means that if you call saveenv on U-Boot compiled with
> > all these options and then replace U-Boot with the one without e.g. MMC
> > support, it does not replace env variables for MMC booting.
> > 
> > Anyway, does not defining e.g. SCSI booting env variables on U-Boot
> > without SCSI support result in the same state as defining SCSI booting
> > env variables on U-Boot with SCSI support with disconnected SCSI
> > controllers or disks? In both cases there would be no SCSI suitable boot
> > device.  
> 
> So, any issues with it?

No. If this cannot cause compilation failures, then I am okay with it.

Re: [PATCH 2/5] arm: mvebu: turris_omnia: Define CONFIG_ETHPRIME instead of ethact= ENV

[Stefan Roese]

On 06.04.22 11:39, Pali Rohár wrote:
> CONFIG_ETHPRIME defines primary ethernet device and env variable $ethact
> stores currently active ethernet device.
> 
> So there is no point to set ethact= in default environment. Instead set
> CONFIG_ETHPRIME properly.
> 
> Signed-off-by: Pali Rohár <pali@kernel.org>
> ---
>   include/configs/turris_omnia.h | 3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/include/configs/turris_omnia.h b/include/configs/turris_omnia.h
> index b35299b2fbb3..15f874ea22e1 100644
> --- a/include/configs/turris_omnia.h
> +++ b/include/configs/turris_omnia.h
> @@ -26,6 +26,8 @@
>   	"fdt_high=0x10000000\0"		\
>   	"initrd_high=0x10000000\0"
>   
> +#define CONFIG_ETHPRIME		"ethernet@34000"
> +

This was moved to Kconfig in the meantime. I'll make the necessary
myself, no need to resend.

Thanks,
Stefan

>   /* Defines for SPL */
>   #define CONFIG_SPL_SIZE			(140 << 10)
>   #define CONFIG_SPL_MAX_SIZE		(CONFIG_SPL_SIZE - (CONFIG_SPL_TEXT_BASE - 0x40000000))
> @@ -119,7 +121,6 @@
>   	LOAD_ADDRESS_ENV_SETTINGS \
>   	"fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
>   	"console=ttyS0,115200\0" \
> -	"ethact=ethernet@34000\0" \
>   	"bootcmd_rescue=" TURRIS_OMNIA_BOOTCMD_RESCUE "\0" \
>   	BOOTENV
>   

Viele Grüße,
Stefan Roese

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr@denx.de

Re: [PATCH 1/5] arm: mvebu: turris_omnia: Fix RESET button message

[Stefan Roese]

On 06.04.22 11:39, Pali Rohár wrote:
> Signed-off-by: Pali Rohár <pali@kernel.org>
> ---
>   board/CZ.NIC/turris_omnia/turris_omnia.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/board/CZ.NIC/turris_omnia/turris_omnia.c b/board/CZ.NIC/turris_omnia/turris_omnia.c
> index 83cfc80d1930..97292456f148 100644
> --- a/board/CZ.NIC/turris_omnia/turris_omnia.c
> +++ b/board/CZ.NIC/turris_omnia/turris_omnia.c
> @@ -488,7 +488,7 @@ static void handle_reset_button(void)
>   		/* Ensure bootcmd_rescue is used by distroboot */
>   		env_set("boot_targets", "rescue");
>   
> -		printf("RESET button was pressed, overwriting bootcmd!\n");
> +		printf("RESET button was pressed, overwriting boot_targets!\n");
>   	} else {
>   		/*
>   		 * In case the user somehow managed to save environment with

Applied to u-boot-marvell/master

Thanks,
Stefan

Re: [PATCH 2/5] arm: mvebu: turris_omnia: Define CONFIG_ETHPRIME instead of ethact= ENV

[Stefan Roese]

On 06.04.22 11:39, Pali Rohár wrote:
> CONFIG_ETHPRIME defines primary ethernet device and env variable $ethact
> stores currently active ethernet device.
> 
> So there is no point to set ethact= in default environment. Instead set
> CONFIG_ETHPRIME properly.
> 
> Signed-off-by: Pali Rohár <pali@kernel.org>
> ---
>   include/configs/turris_omnia.h | 3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/include/configs/turris_omnia.h b/include/configs/turris_omnia.h
> index b35299b2fbb3..15f874ea22e1 100644
> --- a/include/configs/turris_omnia.h
> +++ b/include/configs/turris_omnia.h
> @@ -26,6 +26,8 @@
>   	"fdt_high=0x10000000\0"		\
>   	"initrd_high=0x10000000\0"
>   
> +#define CONFIG_ETHPRIME		"ethernet@34000"
> +
>   /* Defines for SPL */
>   #define CONFIG_SPL_SIZE			(140 << 10)
>   #define CONFIG_SPL_MAX_SIZE		(CONFIG_SPL_SIZE - (CONFIG_SPL_TEXT_BASE - 0x40000000))
> @@ -119,7 +121,6 @@
>   	LOAD_ADDRESS_ENV_SETTINGS \
>   	"fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
>   	"console=ttyS0,115200\0" \
> -	"ethact=ethernet@34000\0" \
>   	"bootcmd_rescue=" TURRIS_OMNIA_BOOTCMD_RESCUE "\0" \
>   	BOOTENV
>   

Applied to u-boot-marvell/master

Thanks,
Stefan

Re: [PATCH 3/5] arm: mvebu: turris_omnia: Always enable MMC, SCSI and USB boot targets

[Stefan Roese]

On 06.04.22 11:39, Pali Rohár wrote:
> U-Boot for Turris Omnia is always compiled with MMC, SCSI and USB support,
> so always enable macros for booting from these devices.
> 
> Signed-off-by: Pali Rohár <pali@kernel.org>
> ---
>   include/configs/turris_omnia.h | 24 +++---------------------
>   1 file changed, 3 insertions(+), 21 deletions(-)
> 
> diff --git a/include/configs/turris_omnia.h b/include/configs/turris_omnia.h
> index 15f874ea22e1..25aa0d0f9075 100644
> --- a/include/configs/turris_omnia.h
> +++ b/include/configs/turris_omnia.h
> @@ -54,28 +54,10 @@
>   /* Include the common distro boot environment */
>   #ifndef CONFIG_SPL_BUILD
>   
> -#ifdef CONFIG_MMC
> -#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
> -#else
> -#define BOOT_TARGET_DEVICES_MMC(func)
> -#endif
> -
> -#ifdef CONFIG_USB_STORAGE
> -#define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
> -#else
> -#define BOOT_TARGET_DEVICES_USB(func)
> -#endif
> -
> -#ifdef CONFIG_SCSI
> -#define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0)
> -#else
> -#define BOOT_TARGET_DEVICES_SCSI(func)
> -#endif
> -
>   #define BOOT_TARGET_DEVICES(func) \
> -	BOOT_TARGET_DEVICES_MMC(func) \
> -	BOOT_TARGET_DEVICES_SCSI(func) \
> -	BOOT_TARGET_DEVICES_USB(func) \
> +	func(MMC, mmc, 0) \
> +	func(SCSI, scsi, 0) \
> +	func(USB, usb, 0) \
>   	func(PXE, pxe, na) \
>   	func(DHCP, dhcp, na)
>   

Applied to u-boot-marvell/master

Thanks,
Stefan

Re: [PATCH 4/5] arm: mvebu: turris_omnia: Add NVMe to boot targets

[Stefan Roese]

On 06.04.22 11:39, Pali Rohár wrote:
> U-Boot for Turris Omnia has already enabled NVMe support. So add NVMe to
> boot targets.
> 
> Signed-off-by: Pali Rohár <pali@kernel.org>
> ---
>   include/configs/turris_omnia.h | 1 +
>   1 file changed, 1 insertion(+)
> 
> diff --git a/include/configs/turris_omnia.h b/include/configs/turris_omnia.h
> index 25aa0d0f9075..99e39531509f 100644
> --- a/include/configs/turris_omnia.h
> +++ b/include/configs/turris_omnia.h
> @@ -56,6 +56,7 @@
>   
>   #define BOOT_TARGET_DEVICES(func) \
>   	func(MMC, mmc, 0) \
> +	func(NVME, nvme, 0) \
>   	func(SCSI, scsi, 0) \
>   	func(USB, usb, 0) \
>   	func(PXE, pxe, na) \

Applied to u-boot-marvell/master

Thanks,
Stefan

Re: [PATCH 5/5] arm: mvebu: turris_mox: Add NVMe and SCSI to boot targets

[Stefan Roese]

On 06.04.22 11:39, Pali Rohár wrote:
> U-Boot for Turris Mox has already enabled NVMe and SCSI support. So add
> NVMe and SCSI to boot targets.
> 
> Signed-off-by: Pali Rohár <pali@kernel.org>
> ---
>   include/configs/turris_mox.h | 2 ++
>   1 file changed, 2 insertions(+)
> 
> diff --git a/include/configs/turris_mox.h b/include/configs/turris_mox.h
> index 3cfad7cca985..69f295b5cefe 100644
> --- a/include/configs/turris_mox.h
> +++ b/include/configs/turris_mox.h
> @@ -28,6 +28,8 @@
>   
>   #define BOOT_TARGET_DEVICES(func) \
>   	func(MMC, mmc, 0) \
> +	func(NVME, nvme, 0) \
> +	func(SCSI, scsi, 0) \
>   	func(USB, usb, 0) \
>   	func(PXE, pxe, na) \
>   	func(DHCP, dhcp, na)

Applied to u-boot-marvell/master

Thanks,
Stefan