[PATCH v2] drm/mediatek: dpi: Use mt8183 output formats for mt8192

["Nícolas F. R. A. Prado" <nfraprado@collabora.com>]

The configuration for mt8192 was incorrectly using the output formats
from mt8173. Since the output formats for mt8192 are instead the same
ones as for mt8183, which require two bus samples per pixel, the
pixelclock and DDR edge setting were misconfigured. This made external
displays unable to show the image.

Fix the issue by correcting the output format for mt8192 to be the same
as for mt8183, fixing the usage of external displays for mt8192.

Fixes: be63f6e8601f ("drm/mediatek: dpi: Add output bus formats to driver data")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>

---

Changes in v2:
- Added Fixes tag

 drivers/gpu/drm/mediatek/mtk_dpi.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 4554e2de1430..e61cd67b978f 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -819,8 +819,8 @@ static const struct mtk_dpi_conf mt8192_conf = {
 	.cal_factor = mt8183_calculate_factor,
 	.reg_h_fre_con = 0xe0,
 	.max_clock_khz = 150000,
-	.output_fmts = mt8173_output_fmts,
-	.num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
+	.output_fmts = mt8183_output_fmts,
+	.num_output_fmts = ARRAY_SIZE(mt8183_output_fmts),
 };
 
 static int mtk_dpi_probe(struct platform_device *pdev)
-- 
2.35.1