* [PATCH v1 00/24] toradex updates: assortment of fixes and improvements
@ 2022-04-08 8:06 Marcel Ziswiler
2022-04-08 8:06 ` [PATCH v1 01/24] arm64: dts: imx8mm-u-boot.dtsi: imx8mp-u-boot.dtsi: use atf-bl31 type Marcel Ziswiler
` (24 more replies)
0 siblings, 25 replies; 42+ messages in thread
From: Marcel Ziswiler @ 2022-04-08 8:06 UTC (permalink / raw)
To: u-boot
Cc: Marcel Ziswiler, AKASHI Takahiro, Alper Nebi Yasak,
Andre Przywara, Bharat Gooty, Christian Hewitt, Clement Faure,
Denys Drozdov, Fabio Estevam, Han Xu, Heinrich Schuchardt,
Igor Opaniuk, Jaehoon Chung, Jagan Teki, Miquel Raynal,
NXP i.MX U-Boot Team, Oliver Graute, Patrick Delaunay, Peng Fan,
Peter Robinson, Philippe Schenker, Rayagonda Kokatanur,
Rick Chen, Sean Anderson, Simon Glass, Stefano Babic,
Tero Kristo, Tim Harvey, Tom Rini, Ying-Chun Liu (PaulLiu),
schspa
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
This series contains an assortment of fixes and improvements for Toradex
computer/system on modules (CoM/SoM).
We also drop support for the Apalis iMX8X and the Colibri PXA270. The
former never evolved beyond the sample state and we no longer support
it. The latter is EOL since a while.
Denys Drozdov (3):
toradex: apalis-imx8x: drop support for apalis imx8x
apalis-imx6: avoid save environment unasked
apalis-tk1: avoid save environment unasked
Igor Opaniuk (3):
toradex: globally disable video support
toradex: set default dhcp distroboot scriptname
toradex: drop legacy nfsboot script
Marcel Ziswiler (9):
arm64: dts: imx8mm-u-boot.dtsi: imx8mp-u-boot.dtsi: use atf-bl31 type
configs: verdin-imx8mm: verdin-imx8mp: enable dm serial
board: toradex: drop colibri pxa270 support
colibri-imx6ull: fix nand bch geometry
board: colibri_imx7: fix usb start on solo
configs: tdx: apalis_imx6: drop hw v1.0 support
configs: tdx: apalis/colibri_imx6: use preboot as well
configs: colibri-imx6ull/-emmc: use micrel ksz8xxx phy driver
board: colibri-imx6ull: fix detecting sd card
Oleksandr Suvorov (3):
colibri-imx6ull: drop vidargs and remove video= settings
configs: toradex: enable missing fit options
configs: colibri-imx7/-emmc: enable booting from usb sdp
Oleksii Bidnichenko (1):
disk: part: add the device search failed log msg
Philippe Schenker (5):
include: colibri_vf: add missing tdxargs variable
board: colibri-imx6ull: Do not leave variant variable unset
configs: tdx: Do not overwrite fdtfile if it got set manually
regulator: fixed: add possibility to enable by clock
board: colibri-imx6ull: fix detecting ethernet phy
arch/arm/Kconfig | 6 -
arch/arm/dts/Makefile | 1 -
arch/arm/dts/fsl-imx8qxp-apalis-u-boot.dtsi | 139 ---------
arch/arm/dts/fsl-imx8qxp-apalis.dts | 278 ------------------
arch/arm/dts/imx6ull-colibri.dts | 1 +
arch/arm/dts/imx6ull-colibri.dtsi | 34 ++-
arch/arm/dts/imx8mm-u-boot.dtsi | 2 +-
arch/arm/dts/imx8mp-u-boot.dtsi | 3 +-
arch/arm/mach-imx/imx8/Kconfig | 6 -
board/toradex/apalis-imx8x/Kconfig | 33 ---
board/toradex/apalis-imx8x/MAINTAINERS | 10 -
board/toradex/apalis-imx8x/Makefile | 6 -
.../apalis-imx8x/apalis-imx8x-imximage.cfg | 23 --
board/toradex/apalis-imx8x/apalis-imx8x.c | 155 ----------
board/toradex/apalis-tk1/apalis-tk1.c | 3 -
board/toradex/apalis_imx6/apalis_imx6.c | 28 +-
.../toradex/colibri-imx6ull/colibri-imx6ull.c | 27 +-
board/toradex/colibri_imx7/colibri_imx7.c | 40 +--
board/toradex/colibri_pxa270/Kconfig | 23 --
board/toradex/colibri_pxa270/MAINTAINERS | 6 -
board/toradex/colibri_pxa270/Makefile | 7 -
board/toradex/colibri_pxa270/colibri_pxa270.c | 153 ----------
board/toradex/common/tdx-cfg-block.c | 32 +-
configs/apalis-imx8_defconfig | 1 +
configs/apalis-imx8x_defconfig | 80 -----
configs/apalis-tk1_defconfig | 1 +
configs/apalis_imx6_defconfig | 13 +-
configs/colibri-imx6ull-emmc_defconfig | 11 +-
configs/colibri-imx6ull_defconfig | 12 +-
configs/colibri-imx8x_defconfig | 1 +
configs/colibri_imx6_defconfig | 13 +-
configs/colibri_imx7_defconfig | 14 +-
configs/colibri_imx7_emmc_defconfig | 11 +-
configs/colibri_pxa270_defconfig | 52 ----
configs/colibri_t20_defconfig | 5 -
configs/colibri_vf_defconfig | 8 +-
configs/verdin-imx8mm_defconfig | 4 +-
configs/verdin-imx8mp_defconfig | 3 +-
disk/part.c | 2 +
doc/board/toradex/apalis-imx8x.rst | 77 -----
doc/board/toradex/index.rst | 1 -
drivers/power/regulator/fixed.c | 60 +++-
include/configs/apalis-imx8.h | 6 +-
include/configs/apalis-imx8x.h | 129 --------
include/configs/apalis-tk1.h | 12 +-
include/configs/apalis_imx6.h | 21 +-
include/configs/apalis_t30.h | 3 +-
include/configs/colibri-imx6ull.h | 15 +-
include/configs/colibri-imx8x.h | 7 +-
include/configs/colibri_imx6.h | 16 +-
include/configs/colibri_imx7.h | 11 +-
include/configs/colibri_pxa270.h | 158 ----------
include/configs/colibri_t20.h | 1 +
include/configs/colibri_t30.h | 3 +-
include/configs/colibri_vf.h | 13 +-
include/configs/pxa-common.h | 27 --
include/configs/verdin-imx8mm.h | 7 +-
include/configs/verdin-imx8mp.h | 6 -
58 files changed, 161 insertions(+), 1659 deletions(-)
delete mode 100644 arch/arm/dts/fsl-imx8qxp-apalis-u-boot.dtsi
delete mode 100644 arch/arm/dts/fsl-imx8qxp-apalis.dts
delete mode 100644 board/toradex/apalis-imx8x/Kconfig
delete mode 100644 board/toradex/apalis-imx8x/MAINTAINERS
delete mode 100644 board/toradex/apalis-imx8x/Makefile
delete mode 100644 board/toradex/apalis-imx8x/apalis-imx8x-imximage.cfg
delete mode 100644 board/toradex/apalis-imx8x/apalis-imx8x.c
delete mode 100644 board/toradex/colibri_pxa270/Kconfig
delete mode 100644 board/toradex/colibri_pxa270/MAINTAINERS
delete mode 100644 board/toradex/colibri_pxa270/Makefile
delete mode 100644 board/toradex/colibri_pxa270/colibri_pxa270.c
delete mode 100644 configs/apalis-imx8x_defconfig
delete mode 100644 configs/colibri_pxa270_defconfig
delete mode 100644 doc/board/toradex/apalis-imx8x.rst
delete mode 100644 include/configs/apalis-imx8x.h
delete mode 100644 include/configs/colibri_pxa270.h
delete mode 100644 include/configs/pxa-common.h
--
2.34.1
^ permalink raw reply [flat|nested] 42+ messages in thread
* [PATCH v1 01/24] arm64: dts: imx8mm-u-boot.dtsi: imx8mp-u-boot.dtsi: use atf-bl31 type
2022-04-08 8:06 [PATCH v1 00/24] toradex updates: assortment of fixes and improvements Marcel Ziswiler
@ 2022-04-08 8:06 ` Marcel Ziswiler
2022-04-12 18:44 ` sbabic
2022-04-08 8:06 ` [PATCH v1 02/24] configs: verdin-imx8mm: verdin-imx8mp: enable dm serial Marcel Ziswiler
` (23 subsequent siblings)
24 siblings, 1 reply; 42+ messages in thread
From: Marcel Ziswiler @ 2022-04-08 8:06 UTC (permalink / raw)
To: u-boot
Cc: Marcel Ziswiler, Fabio Estevam, NXP i.MX U-Boot Team,
Simon Glass, Stefano Babic, Tom Rini
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Explicitly use the atf-bl31 type for the bl31.bin atf-blob. This uses
the path from the BL31 environment variable, if defined.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/dts/imx8mm-u-boot.dtsi | 2 +-
arch/arm/dts/imx8mp-u-boot.dtsi | 3 ++-
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/imx8mm-u-boot.dtsi b/arch/arm/dts/imx8mm-u-boot.dtsi
index 3ea03a96d6d..9f66cdb65a9 100644
--- a/arch/arm/dts/imx8mm-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-u-boot.dtsi
@@ -109,7 +109,7 @@
atf-blob {
filename = "bl31.bin";
- type = "blob-ext";
+ type = "atf-bl31";
};
};
diff --git a/arch/arm/dts/imx8mp-u-boot.dtsi b/arch/arm/dts/imx8mp-u-boot.dtsi
index 120c4c4dbb1..cfc352ae34a 100644
--- a/arch/arm/dts/imx8mp-u-boot.dtsi
+++ b/arch/arm/dts/imx8mp-u-boot.dtsi
@@ -123,8 +123,9 @@
load = <0x970000>;
entry = <0x970000>;
- atf_blob: blob-ext {
+ atf_blob: atf-blob {
filename = "bl31.bin";
+ type = "atf-bl31";
};
};
--
2.34.1
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v1 02/24] configs: verdin-imx8mm: verdin-imx8mp: enable dm serial
2022-04-08 8:06 [PATCH v1 00/24] toradex updates: assortment of fixes and improvements Marcel Ziswiler
2022-04-08 8:06 ` [PATCH v1 01/24] arm64: dts: imx8mm-u-boot.dtsi: imx8mp-u-boot.dtsi: use atf-bl31 type Marcel Ziswiler
@ 2022-04-08 8:06 ` Marcel Ziswiler
2022-04-12 18:41 ` sbabic
2022-04-08 8:06 ` [PATCH v1 03/24] toradex: apalis-imx8x: drop support for apalis imx8x Marcel Ziswiler
` (22 subsequent siblings)
24 siblings, 1 reply; 42+ messages in thread
From: Marcel Ziswiler @ 2022-04-08 8:06 UTC (permalink / raw)
To: u-boot; +Cc: Marcel Ziswiler
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Enable driver model for serial.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
configs/verdin-imx8mm_defconfig | 1 +
configs/verdin-imx8mp_defconfig | 1 +
2 files changed, 2 insertions(+)
diff --git a/configs/verdin-imx8mm_defconfig b/configs/verdin-imx8mm_defconfig
index f2da12e92f6..7a81ae6d374 100644
--- a/configs/verdin-imx8mm_defconfig
+++ b/configs/verdin-imx8mm_defconfig
@@ -97,6 +97,7 @@ CONFIG_DM_PMIC_PFUZE100=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_SERIAL=y
CONFIG_MXC_UART=y
CONFIG_SYSRESET=y
CONFIG_SPL_SYSRESET=y
diff --git a/configs/verdin-imx8mp_defconfig b/configs/verdin-imx8mp_defconfig
index 4c28f7f55e4..35cc4afd3f5 100644
--- a/configs/verdin-imx8mp_defconfig
+++ b/configs/verdin-imx8mp_defconfig
@@ -120,6 +120,7 @@ CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_SPL_POWER_I2C=y
+CONFIG_DM_SERIAL=y
CONFIG_MXC_UART=y
CONFIG_SYSRESET=y
CONFIG_SPL_SYSRESET=y
--
2.34.1
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v1 03/24] toradex: apalis-imx8x: drop support for apalis imx8x
2022-04-08 8:06 [PATCH v1 00/24] toradex updates: assortment of fixes and improvements Marcel Ziswiler
2022-04-08 8:06 ` [PATCH v1 01/24] arm64: dts: imx8mm-u-boot.dtsi: imx8mp-u-boot.dtsi: use atf-bl31 type Marcel Ziswiler
2022-04-08 8:06 ` [PATCH v1 02/24] configs: verdin-imx8mm: verdin-imx8mp: enable dm serial Marcel Ziswiler
@ 2022-04-08 8:06 ` Marcel Ziswiler
2022-04-08 8:06 ` [PATCH v1 04/24] toradex: globally disable video support Marcel Ziswiler
` (21 subsequent siblings)
24 siblings, 0 replies; 42+ messages in thread
From: Marcel Ziswiler @ 2022-04-08 8:06 UTC (permalink / raw)
To: u-boot
Cc: Denys Drozdov, Marcel Ziswiler, Alper Nebi Yasak, Andre Przywara,
Christian Hewitt, Clement Faure, Fabio Estevam,
Heinrich Schuchardt, Igor Opaniuk, Jagan Teki,
NXP i.MX U-Boot Team, Oliver Graute, Peng Fan, Peter Robinson,
Rick Chen, Sean Anderson, Simon Glass, Stefano Babic,
Tero Kristo, Tim Harvey, Ying-Chun Liu (PaulLiu)
From: Denys Drozdov <denys.drozdov@toradex.com>
Drop Apalis iMX8X platform as it never left sample state and is no
longer supported.
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/dts/Makefile | 1 -
arch/arm/dts/fsl-imx8qxp-apalis-u-boot.dtsi | 139 ---------
arch/arm/dts/fsl-imx8qxp-apalis.dts | 278 ------------------
arch/arm/mach-imx/imx8/Kconfig | 6 -
board/toradex/apalis-imx8x/Kconfig | 33 ---
board/toradex/apalis-imx8x/MAINTAINERS | 10 -
board/toradex/apalis-imx8x/Makefile | 6 -
.../apalis-imx8x/apalis-imx8x-imximage.cfg | 23 --
board/toradex/apalis-imx8x/apalis-imx8x.c | 155 ----------
board/toradex/common/tdx-cfg-block.c | 13 +-
configs/apalis-imx8x_defconfig | 80 -----
doc/board/toradex/apalis-imx8x.rst | 77 -----
doc/board/toradex/index.rst | 1 -
include/configs/apalis-imx8x.h | 129 --------
14 files changed, 1 insertion(+), 950 deletions(-)
delete mode 100644 arch/arm/dts/fsl-imx8qxp-apalis-u-boot.dtsi
delete mode 100644 arch/arm/dts/fsl-imx8qxp-apalis.dts
delete mode 100644 board/toradex/apalis-imx8x/Kconfig
delete mode 100644 board/toradex/apalis-imx8x/MAINTAINERS
delete mode 100644 board/toradex/apalis-imx8x/Makefile
delete mode 100644 board/toradex/apalis-imx8x/apalis-imx8x-imximage.cfg
delete mode 100644 board/toradex/apalis-imx8x/apalis-imx8x.c
delete mode 100644 configs/apalis-imx8x_defconfig
delete mode 100644 doc/board/toradex/apalis-imx8x.rst
delete mode 100644 include/configs/apalis-imx8x.h
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 960f1a9fd4d..f5733e9e413 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -889,7 +889,6 @@ dtb-$(CONFIG_ARCH_IMX8) += \
imx8qm-rom7720-a1.dtb \
fsl-imx8qxp-ai_ml.dtb \
fsl-imx8qxp-colibri.dtb \
- fsl-imx8qxp-apalis.dtb \
fsl-imx8qxp-mek.dtb \
imx8-deneb.dtb \
imx8-giedi.dtb
diff --git a/arch/arm/dts/fsl-imx8qxp-apalis-u-boot.dtsi b/arch/arm/dts/fsl-imx8qxp-apalis-u-boot.dtsi
deleted file mode 100644
index e41911a04aa..00000000000
--- a/arch/arm/dts/fsl-imx8qxp-apalis-u-boot.dtsi
+++ /dev/null
@@ -1,139 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright 2020 Toradex
- */
-
-&{/imx8qx-pm} {
-
- u-boot,dm-pre-proper;
-};
-
-&mu {
- u-boot,dm-pre-proper;
-};
-
-&clk {
- u-boot,dm-pre-proper;
-};
-
-&iomuxc {
- u-boot,dm-pre-proper;
-};
-
-&pd_lsio {
- u-boot,dm-pre-proper;
-};
-
-&pd_lsio_gpio0 {
- u-boot,dm-pre-proper;
-};
-
-&pd_lsio_gpio1 {
- u-boot,dm-pre-proper;
-};
-
-&pd_lsio_gpio2 {
- u-boot,dm-pre-proper;
-};
-
-&pd_lsio_gpio3 {
- u-boot,dm-pre-proper;
-};
-
-&pd_lsio_gpio4 {
- u-boot,dm-pre-proper;
-};
-
-&pd_lsio_gpio5 {
- u-boot,dm-pre-proper;
-};
-
-&pd_lsio_gpio6 {
- u-boot,dm-pre-proper;
-};
-
-&pd_lsio_gpio7 {
- u-boot,dm-pre-proper;
-};
-
-&pd_dma {
- u-boot,dm-pre-proper;
-};
-
-&pd_dma_lpuart0 {
- u-boot,dm-pre-proper;
-};
-
-&pd_dma_lpuart3 {
- u-boot,dm-pre-proper;
-};
-
-&pd_conn {
- u-boot,dm-pre-proper;
-};
-
-&pd_conn_sdch0 {
- u-boot,dm-pre-proper;
-};
-
-&pd_conn_sdch1 {
- u-boot,dm-pre-proper;
-};
-
-&pd_conn_sdch2 {
- u-boot,dm-pre-proper;
-};
-
-&pd_conn_enet0 {
- u-boot,dm-pre-proper;
-};
-
-&gpio0 {
- u-boot,dm-pre-proper;
-};
-
-&gpio1 {
- u-boot,dm-pre-proper;
-};
-
-&gpio2 {
- u-boot,dm-pre-proper;
-};
-
-&gpio3 {
- u-boot,dm-pre-proper;
-};
-
-&gpio4 {
- u-boot,dm-pre-proper;
-};
-
-&gpio5 {
- u-boot,dm-pre-proper;
-};
-
-&gpio6 {
- u-boot,dm-pre-proper;
-};
-
-&gpio7 {
- u-boot,dm-pre-proper;
-};
-
-&lpuart3 {
- u-boot,dm-pre-proper;
-};
-
-&lpuart0 {
- u-boot,dm-pre-proper;
-};
-
-&usdhc1 {
- u-boot,dm-pre-proper;
- /delete-property/ assigned-clock-parents;
-};
-
-&usdhc2 {
- u-boot,dm-pre-proper;
- /delete-property/ assigned-clock-parents;
-};
diff --git a/arch/arm/dts/fsl-imx8qxp-apalis.dts b/arch/arm/dts/fsl-imx8qxp-apalis.dts
deleted file mode 100644
index 9cb3d3a809b..00000000000
--- a/arch/arm/dts/fsl-imx8qxp-apalis.dts
+++ /dev/null
@@ -1,278 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Copyright 2020 Toradex
- */
-
-/dts-v1/;
-
-#include "fsl-imx8qxp.dtsi"
-#include "fsl-imx8qxp-apalis-u-boot.dtsi"
-
-/ {
- model = "Toradex Apalis iMX8X";
- compatible = "toradex,apalis-imx8x", "fsl,imx8qxp";
-
- chosen {
- bootargs = "console=ttyLP1,115200";
- stdout-path = &lpuart1;
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- reg_usb_otg1_vbus: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "usb_otg1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
- };
-};
-
-&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog0>, <&pinctrl_hog1>, <&pinctrl_reset_moci>;
-
- apalis-imx8x {
- /* Apalis UART1 */
- pinctrl_lpuart1: lpuart1grp {
- fsl,pins = <
- SC_P_UART1_RX_ADMA_UART1_RX 0x06000020 /* SODIMM 118 */
- SC_P_UART1_TX_ADMA_UART1_TX 0x06000020 /* SODIMM 112 */
- >;
- };
-
- /* On-module Gigabit Ethernet PHY Micrel KSZ9031 */
- pinctrl_fec1: fec1grp {
- fsl,pins = <
- SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD 0x14a0
- SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB1_PAD 0x14a0
- SC_P_ENET0_MDC_CONN_ENET0_MDC 0x06000020
- SC_P_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020
- SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x61
- SC_P_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x61
- SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x61
- SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x61
- SC_P_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x61
- SC_P_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x61
- SC_P_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x61
- SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x61
- SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x61
- SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x61
- SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x61
- SC_P_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x61
- /* On-module ETH_RESET# */
- SC_P_MIPI_CSI0_MCLK_OUT_LSIO_GPIO3_IO04 0x06000020
- /* On-module ETH_INT# */
- SC_P_ADC_IN2_LSIO_GPIO1_IO12 0x21
- >;
- };
-
- /* Apalis BKL_ON */
- pinctrl_gpio_bkl_on: gpio-bkl-on {
- fsl,pins = <
- SC_P_QSPI0A_DQS_LSIO_GPIO3_IO13 0x40 /* SODIMM 286 */
- >;
- };
-
- pinctrl_hog0: hog0grp {
- fsl,pins = <
- SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD 0x000514a0
- >;
- };
-
- pinctrl_hog1: hog1grp {
- fsl,pins = <
- /* Apalis USBO1_EN */
- SC_P_QSPI0A_SCLK_LSIO_GPIO3_IO16 0x41 /* SODIMM 274 */
- >;
- };
-
- /* Apalis RESET_MOCI# */
- pinctrl_reset_moci: gpioresetmocigrp {
- fsl,pins = <
- SC_P_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO01 0x21
- >;
- };
-
- /* On-module eMMC */
- pinctrl_usdhc1: usdhc1grp {
- fsl,pins = <
- SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
- SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x21
- SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21
- SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21
- SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21
- SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21
- SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21
- SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21
- SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21
- SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21
- SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41
- SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21
- >;
- };
-
- pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
- fsl,pins = <
- SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
- SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x21
- SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21
- SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21
- SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21
- SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21
- SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21
- SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21
- SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21
- SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21
- SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41
- SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21
- >;
- };
-
- pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
- fsl,pins = <
- SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
- SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x21
- SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x21
- SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x21
- SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x21
- SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x21
- SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x21
- SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x21
- SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x21
- SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x21
- SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x41
- SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x21
- >;
- };
-
- /* Apalis MMC1_CD# */
- pinctrl_usdhc2_gpio: mmc1gpiogrp {
- fsl,pins = <
- SC_P_USDHC1_CD_B_LSIO_GPIO4_IO22 0x06000021 /* SODIMM 164 */
- >;
- };
-
- pinctrl_usdhc2_gpio_sleep: usdhc1gpioslpgrp {
- fsl,pins = <
- SC_P_USDHC1_CD_B_LSIO_GPIO4_IO22 0x60 /* SODIMM 164 */
- >;
- };
-
- /* Apalis USBH_EN */
- pinctrl_usbh_en: usbhen {
- fsl,pins = <
- SC_P_USB_SS3_TC1_LSIO_GPIO4_IO04 0x40 /* SODIMM 84 */
- >;
- };
-
- /* Apalis MMC1 */
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 154 */
- SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 150 */
- SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21 /* SODIMM 160 */
- SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21 /* SODIMM 162 */
- SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21 /* SODIMM 144 */
- SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21 /* SODIMM 146 */
- SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21
- >;
- };
-
- pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
- fsl,pins = <
- SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 154 */
- SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 150 */
- SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21 /* SODIMM 160 */
- SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21 /* SODIMM 162 */
- SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21 /* SODIMM 144 */
- SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21 /* SODIMM 146 */
- SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21
- >;
- };
-
- pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
- fsl,pins = <
- SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 /* SODIMM 154 */
- SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x21 /* SODIMM 150 */
- SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x21 /* SODIMM 160 */
- SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x21 /* SODIMM 162 */
- SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x21 /* SODIMM 144 */
- SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x21 /* SODIMM 146 */
- SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21
- >;
- };
-
- pinctrl_usdhc2_sleep: usdhc2slpgrp {
- fsl,pins = <
- SC_P_USDHC1_CLK_LSIO_GPIO4_IO23 0x60 /* SODIMM 154 */
- SC_P_USDHC1_CMD_LSIO_GPIO4_IO24 0x60 /* SODIMM 150 */
- SC_P_USDHC1_DATA0_LSIO_GPIO4_IO25 0x60 /* SODIMM 160 */
- SC_P_USDHC1_DATA1_LSIO_GPIO4_IO26 0x60 /* SODIMM 162 */
- SC_P_USDHC1_DATA2_LSIO_GPIO4_IO27 0x60 /* SODIMM 144 */
- SC_P_USDHC1_DATA3_LSIO_GPIO4_IO28 0x60 /* SODIMM 146 */
- SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x21
- >;
- };
- };
-};
-
-/* Apalis Gigabit LAN */
-&fec1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec1>;
- fsl,magic-packet;
- phy-handle = <ðphy0>;
- phy-mode = "rgmii-id";
- phy-reset-duration = <10>;
- phy-reset-post-delay = <150>;
- phy-reset-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy0: ethernet-phy@4 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <4>;
- };
- };
-};
-
-/* Apalis UART1 */
-&lpuart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lpuart1>;
- status = "okay";
-};
-
-/* On-module eMMC */
-&usdhc1 {
- bus-width = <8>;
- non-removable;
- pinctrl-names = "default", "state_100mhz", "state_200mhz";
- pinctrl-0 = <&pinctrl_usdhc1>;
- pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
- pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
- status = "okay";
-};
-
-/* Apalis MMC1 */
-&usdhc2 {
- bus-width = <4>;
- cd-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
- pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
- pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
- pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
- pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>;
- disable-wp;
- status = "okay";
-};
diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig
index b43739e5c64..3bb354ed16c 100644
--- a/arch/arm/mach-imx/imx8/Kconfig
+++ b/arch/arm/mach-imx/imx8/Kconfig
@@ -53,11 +53,6 @@ config TARGET_COLIBRI_IMX8X
select BOARD_LATE_INIT
select IMX8QXP
-config TARGET_APALIS_IMX8X
- bool "Support Apalis iMX8X module"
- select BOARD_LATE_INIT
- select IMX8QXP
-
config TARGET_DENEB
bool "Support i.MX8QXP Capricorn Deneb board"
select BOARD_LATE_INIT
@@ -98,7 +93,6 @@ source "board/congatec/cgtqmx8/Kconfig"
source "board/advantech/imx8qm_rom7720_a1/Kconfig"
source "board/toradex/apalis-imx8/Kconfig"
source "board/toradex/colibri-imx8x/Kconfig"
-source "board/toradex/apalis-imx8x/Kconfig"
source "board/siemens/capricorn/Kconfig"
config IMX_SNVS_SEC_SC
diff --git a/board/toradex/apalis-imx8x/Kconfig b/board/toradex/apalis-imx8x/Kconfig
deleted file mode 100644
index d6cda7e3ff0..00000000000
--- a/board/toradex/apalis-imx8x/Kconfig
+++ /dev/null
@@ -1,33 +0,0 @@
-if TARGET_APALIS_IMX8X
-
-config SYS_BOARD
- default "apalis-imx8x"
-
-config SYS_VENDOR
- default "toradex"
-
-config SYS_CONFIG_NAME
- default "apalis-imx8x"
-
-config TDX_CFG_BLOCK
- default y
-
-config TDX_HAVE_MMC
- default y
-
-config TDX_CFG_BLOCK_DEV
- default "0"
-
-config TDX_CFG_BLOCK_PART
- default "1"
-
-# Toradex config block in eMMC, at the end of 1st "boot sector"
-config TDX_CFG_BLOCK_OFFSET
- default "-512"
-
-config IMX_CONFIG
- default "board/toradex/apalis-imx8x/apalis-imx8x-imximage.cfg"
-
-source "board/toradex/common/Kconfig"
-
-endif
diff --git a/board/toradex/apalis-imx8x/MAINTAINERS b/board/toradex/apalis-imx8x/MAINTAINERS
deleted file mode 100644
index 93d6cdd4742..00000000000
--- a/board/toradex/apalis-imx8x/MAINTAINERS
+++ /dev/null
@@ -1,10 +0,0 @@
-Apalis iMX8X
-M: Marcel Ziswiler <marcel.ziswiler@toradex.com>
-W: http://developer.toradex.com/software/linux/linux-software
-S: Maintained
-F: arch/arm/dts/fsl-imx8x-apalis.dts
-F: arch/arm/dts/fsl-imx8x-apalis-u-boot.dtsi
-F: board/toradex/apalis-imx8x/
-F: configs/apalis-imx8x_defconfig
-F: doc/board/toradex/apalis-imx8x.rst
-F: include/configs/apalis-imx8x.h
diff --git a/board/toradex/apalis-imx8x/Makefile b/board/toradex/apalis-imx8x/Makefile
deleted file mode 100644
index 9d6e85b7429..00000000000
--- a/board/toradex/apalis-imx8x/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright 2020 Toradex
-#
-
-obj-y += apalis-imx8x.o
diff --git a/board/toradex/apalis-imx8x/apalis-imx8x-imximage.cfg b/board/toradex/apalis-imx8x/apalis-imx8x-imximage.cfg
deleted file mode 100644
index c229706f80a..00000000000
--- a/board/toradex/apalis-imx8x/apalis-imx8x-imximage.cfg
+++ /dev/null
@@ -1,23 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2020 Toradex
- *
- * Refer doc/imx/mkimage/imx8image.txt for more details about how-to configure
- * and create imx8image boot image
- */
-
-
-/* Boot from SD, sector size 0x400 */
-BOOT_FROM EMMC_FASTBOOT 0x400
-/* SoC type IMX8QX */
-SOC_TYPE IMX8QX
-/* Append seco container image */
-APPEND mx8qx-ahab-container.img
-/* Create the 2nd container */
-CONTAINER
-/* Add scfw image with exec attribute */
-IMAGE SCU mx8qx-apalis-scfw-tcm.bin
-/* Add ATF image with exec attribute */
-IMAGE A35 bl31.bin 0x80000000
-/* Add U-Boot image with load attribute */
-DATA A35 u-boot-dtb.bin 0x80020000
diff --git a/board/toradex/apalis-imx8x/apalis-imx8x.c b/board/toradex/apalis-imx8x/apalis-imx8x.c
deleted file mode 100644
index ac3bac66a96..00000000000
--- a/board/toradex/apalis-imx8x/apalis-imx8x.c
+++ /dev/null
@@ -1,155 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2020 Toradex
- */
-
-#include <common.h>
-#include <cpu_func.h>
-#include <init.h>
-
-#include <asm/arch/clock.h>
-#include <asm/arch/imx8-pins.h>
-#include <asm/arch/iomux.h>
-#include <asm/arch/sci/sci.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/global_data.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-#include <env.h>
-#include <errno.h>
-#include <linux/libfdt.h>
-
-#include "../common/tdx-cfg-block.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define UART_PAD_CTRL ((SC_PAD_CONFIG_OUT_IN << PADRING_CONFIG_SHIFT) | \
- (SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \
- (SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | \
- (SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT))
-
-static iomux_cfg_t uart1_pads[] = {
- SC_P_UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
- SC_P_UART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
-static void setup_iomux_uart(void)
-{
- imx8_iomux_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
-}
-
-void board_mem_get_layout(u64 *phys_sdram_1_start,
- u64 *phys_sdram_1_size,
- u64 *phys_sdram_2_start,
- u64 *phys_sdram_2_size)
-{
- u32 is_dualx = 0, val = 0;
- sc_err_t scierr = sc_misc_otp_fuse_read(-1, 6, &val);
-
- if (scierr == SC_ERR_NONE) {
- /* DX has two A35 cores disabled */
- is_dualx = (val & 0xf) != 0x0;
- }
-
- *phys_sdram_1_start = PHYS_SDRAM_1;
- if (is_dualx)
- /* Our DX based SKUs only have 1 GB RAM */
- *phys_sdram_1_size = SZ_1G;
- else
- *phys_sdram_1_size = PHYS_SDRAM_1_SIZE;
- *phys_sdram_2_start = PHYS_SDRAM_2;
- *phys_sdram_2_size = PHYS_SDRAM_2_SIZE;
-}
-
-int board_early_init_f(void)
-{
- sc_pm_clock_rate_t rate;
- sc_err_t err = 0;
-
- /*
- * This works around that having only UART3 up the baudrate is 1.2M
- * instead of 115.2k. Set UART0 clock root to 80 MHz
- */
- rate = 80000000;
- err = sc_pm_set_clock_rate(-1, SC_R_UART_0, SC_PM_CLK_PER, &rate);
- if (err != SC_ERR_NONE)
- return 0;
-
- /* Set UART3 clock root to 80 MHz and enable it */
- rate = SC_80MHZ;
- err = sc_pm_setup_uart(SC_R_UART_1, rate);
- if (err != SC_ERR_NONE)
- return 0;
-
- setup_iomux_uart();
-
- return 0;
-}
-
-#if IS_ENABLED(CONFIG_DM_GPIO)
-static void board_gpio_init(void)
-{
- /* TODO */
-}
-#else
-static inline void board_gpio_init(void) {}
-#endif
-
-#if IS_ENABLED(CONFIG_FEC_MXC)
-#include <miiphy.h>
-
-int board_phy_config(struct phy_device *phydev)
-{
- if (phydev->drv->config)
- phydev->drv->config(phydev);
-
- return 0;
-}
-#endif
-
-int checkboard(void)
-{
- puts("Model: Toradex Apalis iMX8X\n");
-
- build_info();
- print_bootinfo();
-
- return 0;
-}
-
-int board_init(void)
-{
- board_gpio_init();
-
- return 0;
-}
-
-/*
- * Board specific reset that is system reset.
- */
-void reset_cpu(void)
-{
- /* TODO */
-}
-
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, struct bd_info *bd)
-{
- return ft_common_board_setup(blob, bd);
-}
-#endif
-
-int board_mmc_get_env_dev(int devno)
-{
- return devno;
-}
-
-int board_late_init(void)
-{
-#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-/* TODO move to common */
- env_set("board_name", "Apalis iMX8X");
-#endif
-
- return 0;
-}
diff --git a/board/toradex/common/tdx-cfg-block.c b/board/toradex/common/tdx-cfg-block.c
index 7cadd05c0a7..0e657a2a0a9 100644
--- a/board/toradex/common/tdx-cfg-block.c
+++ b/board/toradex/common/tdx-cfg-block.c
@@ -13,7 +13,6 @@
#if defined(CONFIG_TARGET_APALIS_IMX6) || \
defined(CONFIG_TARGET_APALIS_IMX8) || \
- defined(CONFIG_TARGET_APALIS_IMX8X) || \
defined(CONFIG_TARGET_COLIBRI_IMX6) || \
defined(CONFIG_TARGET_COLIBRI_IMX8X) || \
defined(CONFIG_TARGET_VERDIN_IMX8MM) || \
@@ -379,7 +378,6 @@ static int get_cfgblock_interactive(void)
it = console_buffer[0];
#if defined(CONFIG_TARGET_APALIS_IMX8) || \
- defined(CONFIG_TARGET_APALIS_IMX8X) || \
defined(CONFIG_TARGET_COLIBRI_IMX6ULL) || \
defined(CONFIG_TARGET_COLIBRI_IMX8X) || \
defined(CONFIG_TARGET_VERDIN_IMX8MM) || \
@@ -451,16 +449,7 @@ static int get_cfgblock_interactive(void)
tdx_hw_tag.prodid = APALIS_IMX8QP;
}
} else if (is_cpu_type(MXC_CPU_IMX8QXP)) {
-#ifdef CONFIG_TARGET_APALIS_IMX8X
- if (it == 'y' || it == 'Y' || wb == 'y' || wb == 'Y') {
- tdx_hw_tag.prodid = APALIS_IMX8QXP_WIFI_BT_IT;
- } else {
- if (gd->ram_size == 0x40000000)
- tdx_hw_tag.prodid = APALIS_IMX8DXP;
- else
- tdx_hw_tag.prodid = APALIS_IMX8QXP;
- }
-#elif CONFIG_TARGET_COLIBRI_IMX8X
+#ifdef CONFIG_TARGET_COLIBRI_IMX8X
if (it == 'y' || it == 'Y') {
if (wb == 'y' || wb == 'Y')
tdx_hw_tag.prodid = COLIBRI_IMX8QXP_WIFI_BT_IT;
diff --git a/configs/apalis-imx8x_defconfig b/configs/apalis-imx8x_defconfig
deleted file mode 100644
index 25da027f7ec..00000000000
--- a/configs/apalis-imx8x_defconfig
+++ /dev/null
@@ -1,80 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_IMX8=y
-CONFIG_SYS_TEXT_BASE=0x80020000
-CONFIG_SYS_MALLOC_LEN=0x2800000
-CONFIG_SYS_MALLOC_F_LEN=0x4000
-CONFIG_NR_DRAM_BANKS=3
-CONFIG_SYS_MEMTEST_START=0x88000000
-CONFIG_SYS_MEMTEST_END=0x89000000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0xFFFFDE00
-CONFIG_DM_GPIO=y
-CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8qxp-apalis"
-CONFIG_TARGET_APALIS_IMX8X=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_REMAKE_ELF=y
-CONFIG_SYS_LOAD_ADDR=0x89000000
-CONFIG_FIT=y
-CONFIG_OF_SYSTEM_SETUP=y
-CONFIG_BOOTDELAY=1
-CONFIG_LOG=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SYS_PROMPT="Apalis iMX8X # "
-CONFIG_CMD_CPU=y
-# CONFIG_BOOTM_NETBSD is not set
-CONFIG_CMD_ASKENV=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_CLK=y
-CONFIG_CMD_DM=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_UUID=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_SYS_MMC_ENV_PART=1
-CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
-CONFIG_VERSION_VARIABLE=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_IP_DEFRAG=y
-CONFIG_TFTP_BLOCKSIZE=4096
-CONFIG_TFTP_TSIZE=y
-CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_BOOTCOUNT_ENV=y
-CONFIG_CLK_IMX8=y
-CONFIG_CPU=y
-CONFIG_MXC_GPIO=y
-CONFIG_DM_I2C=y
-CONFIG_SYS_I2C_IMX_LPI2C=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_MISC=y
-CONFIG_SUPPORT_EMMC_BOOT=y
-CONFIG_FSL_USDHC=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_ADDR_ENABLE=y
-CONFIG_PHY_MICREL=y
-CONFIG_PHY_MICREL_KSZ90X1=y
-CONFIG_DM_ETH=y
-CONFIG_FEC_MXC_SHARE_MDIO=y
-CONFIG_FEC_MXC_MDIO_BASE=0x5B040000
-CONFIG_FEC_MXC=y
-CONFIG_MII=y
-CONFIG_PCI=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX8=y
-CONFIG_POWER_DOMAIN=y
-CONFIG_IMX8_POWER_DOMAIN=y
-CONFIG_DM_REGULATOR=y
-CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_DM_REGULATOR_GPIO=y
-CONFIG_DM_SERIAL=y
-CONFIG_FSL_LPUART=y
-CONFIG_DM_THERMAL=y
-CONFIG_IMX_SCU_THERMAL=y
-# CONFIG_EFI_LOADER is not set
diff --git a/doc/board/toradex/apalis-imx8x.rst b/doc/board/toradex/apalis-imx8x.rst
deleted file mode 100644
index e62578b1527..00000000000
--- a/doc/board/toradex/apalis-imx8x.rst
+++ /dev/null
@@ -1,77 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0+
-
-Apalis iMX8X V1.1A Module (SoC NXP i.MX8QXP RevB)
-=================================================
-
-Quick Start
------------
-
-- Get and Build the ARM trusted firmware
-- Get System Controller firmware
-- Get SECO container
-- Build U-Boot
-- Load U-Boot binary using uuu
-- Flash U-Boot binary into the eMMC
-- Boot
-
-Note: builddir is U-Boot build directory (source directory for in-tree builds)
-
-Get and Build the ARM Trusted Firmware
---------------------------------------
-
-.. code-block:: bash
-
- $ cd $(builddir)
- $ git clone -b toradex_imx_5.4.70_2.3.0 http://git.toradex.com/cgit/imx-atf.git
- $ make PLAT=imx8qx bl31 -C imx-atf
- $ cp imx-atf/build/imx8qx/release/bl31.bin $(builddir)
-
-Get System Controller firmware
----------------------------------------
-
-.. code-block:: bash
-
- $ wget https://github.com/toradex/i.MX-System-Controller-Firmware/raw/master/src/scfw_export_mx8qx_b0/build_mx8qx_b0/mx8qx-apalis-scfw-tcm.bin
-
-Get SECO container
----------------------------------------
-
-.. code-block:: bash
-
- $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/imx-seco-3.7.4.bin
- $ sh imx-seco-3.7.4.bin
- $ cp imx-seco-3.7.4/firmware/seco/mx8qxb0-ahab-container.img $(builddir)/mx8qx-ahab-container.img
-
-Build U-Boot
-------------
-.. code-block:: bash
-
- $ make apalis-imx8x_defconfig
- $ make u-boot-dtb.imx
-
-Load the U-Boot Binary Using UUU
---------------------------------
-
-Get the latest version of the universal update utility (uuu) aka ``mfgtools 3.0``:
-
-https://community.nxp.com/external-link.jspa?url=https%3A%2F%2Fgithub.com%2FNXPmicro%2Fmfgtools%2Freleases
-
-Put the module into USB recovery aka serial downloader mode, connect USB device
-to your host and execute uuu:
-
-.. code-block:: bash
-
- sudo ./uuu $(builddir)/u-boot-dtb.imx
-
-Flash the U-Boot Binary into the eMMC
--------------------------------------
-
-Burn the ``u-boot-dtb.imx`` binary to the primary eMMC hardware boot area
-partition and boot:
-
-.. code-block:: bash
-
- load mmc 1:1 $loadaddr u-boot-dtb.imx
- setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200
- mmc dev 0 1
- mmc write ${loadaddr} 0x0 ${blkcnt}
diff --git a/doc/board/toradex/index.rst b/doc/board/toradex/index.rst
index 1cd926a7303..ead5efbb955 100644
--- a/doc/board/toradex/index.rst
+++ b/doc/board/toradex/index.rst
@@ -7,7 +7,6 @@ Toradex
:maxdepth: 2
apalis-imx8
- apalis-imx8x
colibri_imx7
colibri-imx8x
verdin-imx8mm
diff --git a/include/configs/apalis-imx8x.h b/include/configs/apalis-imx8x.h
deleted file mode 100644
index 8a6f294ae89..00000000000
--- a/include/configs/apalis-imx8x.h
+++ /dev/null
@@ -1,129 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2020 Toradex
- */
-
-#ifndef __APALIS_IMX8X_H
-#define __APALIS_IMX8X_H
-
-#include <asm/arch/imx-regs.h>
-#include <linux/sizes.h>
-#include <linux/stringify.h>
-
-#define CONFIG_SYS_FSL_ESDHC_ADDR 0
-#define USDHC1_BASE_ADDR 0x5b010000
-#define USDHC2_BASE_ADDR 0x5b020000
-
-#define CONFIG_IPADDR 192.168.10.2
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_SERVERIP 192.168.10.1
-
-#define MEM_LAYOUT_ENV_SETTINGS \
- "kernel_addr_r=0x80280000\0" \
- "fdt_addr_r=0x83100000\0" \
- "ramdisk_addr_r=0x8a000000\0" \
- "scriptaddr=0x83200000\0"
-
-#ifdef CONFIG_AHAB_BOOT
-#define AHAB_ENV "sec_boot=yes\0"
-#else
-#define AHAB_ENV "sec_boot=no\0"
-#endif
-
-/* Boot M4 */
-#define M4_BOOT_ENV \
- "m4_0_image=m4_0.bin\0" \
- "loadm4image_0=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
- "${m4_0_image}\0" \
- "m4boot_0=run loadm4image_0; dcache flush; bootaux ${loadaddr} 0\0" \
-
-#define MFG_NAND_PARTITION ""
-
-#define BOOT_TARGET_DEVICES(func) \
- func(MMC, mmc, 1) \
- func(MMC, mmc, 0) \
- func(DHCP, dhcp, na)
-#include <config_distro_bootcmd.h>
-#undef BOOTENV_RUN_NET_USB_START
-#define BOOTENV_RUN_NET_USB_START ""
-
-#define CONFIG_MFG_ENV_SETTINGS \
- "mfgtool_args=setenv bootargs ${consoleargs} " \
- "rdinit=/linuxrc g_mass_storage.stall=0 " \
- "g_mass_storage.removable=1 g_mass_storage.idVendor=0x066F " \
- "g_mass_storage.idProduct=0x37FF " \
- "g_mass_storage.iSerialNumber=\"\" " MFG_NAND_PARTITION \
- "${vidargs} clk_ignore_unused\0" \
- "initrd_addr=0x83800000\0" \
- "bootcmd_mfg=run mfgtool_args;booti ${loadaddr} ${initrd_addr} " \
- "${fdt_addr};\0" \
-
-/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- AHAB_ENV \
- BOOTENV \
- CONFIG_MFG_ENV_SETTINGS \
- M4_BOOT_ENV \
- MEM_LAYOUT_ENV_SETTINGS \
- "boot_file=Image\0" \
- "consoleargs=console=ttyLP3,${baudrate} earlycon\0" \
- "fdt_file=imx8qxp-apalis-eval.dtb\0" \
- "fdtfile=imx8qxp-apalis-eval.dtb\0" \
- "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
- "image=Image\0" \
- "initrd_addr=0x83800000\0" \
- "mmcargs=setenv bootargs ${consoleargs} " \
- "root=PARTUUID=${uuid} rootwait " \
- "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
- "mmcpart=1\0" \
- "netargs=setenv bootargs ${consoleargs} " \
- "root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp " \
- "${vidargs}\0" \
- "nfsboot=run netargs; dhcp ${loadaddr} ${image}; tftp ${fdt_addr} " \
- "apalis-imx8x/${fdt_file}; booti ${loadaddr} - " \
- "${fdt_addr}\0" \
- "panel=NULL\0" \
- "script=boot.scr\0" \
- "update_uboot=askenv confirm Did you load u-boot-dtb.imx (y/N)?; " \
- "if test \"$confirm\" = \"y\"; then " \
- "setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
- "${blkcnt} / 0x200; mmc dev 0 1; mmc write ${loadaddr} 0x0 " \
- "${blkcnt}; fi\0" \
- "vidargs=video=imxdpufb5:off video=imxdpufb6:off video=imxdpufb7:off\0"
-
-/* Link Definitions */
-
-#define CONFIG_SYS_INIT_SP_ADDR 0x80200000
-
-/* Environment in eMMC, before config block at the end of 1st "boot sector" */
-
-/* On Apalis iMX8X USDHC1 is eMMC, USDHC2 is 4-bit SD */
-#define CONFIG_SYS_FSL_USDHC_NUM 2
-
-#define CONFIG_SYS_BOOTM_LEN SZ_64M /* Increase max gunzip size */
-
-#define CONFIG_SYS_SDRAM_BASE 0x80000000
-#define PHYS_SDRAM_1 0x80000000
-#define PHYS_SDRAM_2 0x880000000
-#define PHYS_SDRAM_1_SIZE SZ_2G /* 2 GB */
-#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 GB */
-
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE SZ_2K
-#define CONFIG_SYS_MAXARGS 64
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-
-/* Generic Timer Definitions */
-#define COUNTER_FREQUENCY 8000000 /* 8MHz */
-
-/* Networking */
-#define CONFIG_FEC_ENET_DEV 0
-#define IMX_FEC_BASE 0x5b040000
-#define CONFIG_FEC_MXC_PHYADDR 0x4
-#define CONFIG_ETHPRIME "eth0"
-#define CONFIG_FEC_XCV_TYPE RGMII
-#define PHY_ANEG_TIMEOUT 20000
-
-#endif /* __APALIS_IMX8X_H */
--
2.34.1
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v1 04/24] toradex: globally disable video support
2022-04-08 8:06 [PATCH v1 00/24] toradex updates: assortment of fixes and improvements Marcel Ziswiler
` (2 preceding siblings ...)
2022-04-08 8:06 ` [PATCH v1 03/24] toradex: apalis-imx8x: drop support for apalis imx8x Marcel Ziswiler
@ 2022-04-08 8:06 ` Marcel Ziswiler
2022-04-08 8:07 ` [PATCH v1 05/24] toradex: set default dhcp distroboot scriptname Marcel Ziswiler
` (20 subsequent siblings)
24 siblings, 0 replies; 42+ messages in thread
From: Marcel Ziswiler @ 2022-04-08 8:06 UTC (permalink / raw)
To: u-boot; +Cc: Igor Opaniuk, Marcel Ziswiler
From: Igor Opaniuk <igor.opaniuk@toradex.com>
As video support is very specific depending on the exact display
customisation we decided to disable video support for all out modules
by default.
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
configs/apalis_imx6_defconfig | 10 ----------
configs/colibri-imx6ull-emmc_defconfig | 7 -------
configs/colibri-imx6ull_defconfig | 8 --------
configs/colibri_imx6_defconfig | 10 ----------
configs/colibri_imx7_defconfig | 8 --------
configs/colibri_imx7_emmc_defconfig | 7 -------
configs/colibri_t20_defconfig | 5 -----
configs/colibri_vf_defconfig | 6 ------
8 files changed, 61 deletions(-)
diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig
index bd71e4c32aa..382092294e3 100644
--- a/configs/apalis_imx6_defconfig
+++ b/configs/apalis_imx6_defconfig
@@ -56,7 +56,6 @@ CONFIG_CMD_USB=y
CONFIG_CMD_USB_SDP=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_NFS is not set
-CONFIG_CMD_BMP=y
CONFIG_CMD_BOOTCOUNT=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
@@ -106,13 +105,4 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x1b67
CONFIG_USB_GADGET_PRODUCT_NUM=0x4000
CONFIG_CI_UDC=y
CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_DM_VIDEO=y
-CONFIG_VIDEO_LOGO=y
-# CONFIG_VIDEO_BPP8 is not set
-# CONFIG_VIDEO_BPP32 is not set
-CONFIG_SYS_WHITE_ON_BLACK=y
-CONFIG_VIDEO_IPUV3=y
-CONFIG_SPLASH_SCREEN=y
-CONFIG_SPLASH_SCREEN_ALIGN=y
-CONFIG_BMP_16BPP=y
CONFIG_OF_LIBFDT_OVERLAY=y
diff --git a/configs/colibri-imx6ull-emmc_defconfig b/configs/colibri-imx6ull-emmc_defconfig
index e7dba8ec6d1..3483fa6fc45 100644
--- a/configs/colibri-imx6ull-emmc_defconfig
+++ b/configs/colibri-imx6ull-emmc_defconfig
@@ -37,7 +37,6 @@ CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_SDP=y
CONFIG_CMD_USB_MASS_STORAGE=y
-CONFIG_CMD_BMP=y
CONFIG_CMD_BOOTCOUNT=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_REGULATOR=y
@@ -78,10 +77,4 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x1b67
CONFIG_USB_GADGET_PRODUCT_NUM=0x4000
CONFIG_CI_UDC=y
CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_DM_VIDEO=y
-CONFIG_VIDEO_LOGO=y
-CONFIG_SYS_WHITE_ON_BLACK=y
-CONFIG_SPLASH_SCREEN=y
-CONFIG_SPLASH_SCREEN_ALIGN=y
-CONFIG_BMP_16BPP=y
CONFIG_OF_LIBFDT_OVERLAY=y
diff --git a/configs/colibri-imx6ull_defconfig b/configs/colibri-imx6ull_defconfig
index 2b9d318f709..de35fbcabf6 100644
--- a/configs/colibri-imx6ull_defconfig
+++ b/configs/colibri-imx6ull_defconfig
@@ -42,7 +42,6 @@ CONFIG_CMD_NAND_TORTURE=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_SDP=y
CONFIG_CMD_USB_MASS_STORAGE=y
-CONFIG_CMD_BMP=y
CONFIG_CMD_BOOTCOUNT=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_REGULATOR=y
@@ -94,12 +93,5 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x1b67
CONFIG_USB_GADGET_PRODUCT_NUM=0x4000
CONFIG_CI_UDC=y
CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_DM_VIDEO=y
-CONFIG_VIDEO_LOGO=y
-CONFIG_SYS_WHITE_ON_BLACK=y
-CONFIG_VIDEO_MXS=y
-CONFIG_SPLASH_SCREEN=y
-CONFIG_SPLASH_SCREEN_ALIGN=y
-CONFIG_BMP_16BPP=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_FDT_FIXUP_PARTITIONS=y
diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig
index 43c3b04e312..03f2f88688b 100644
--- a/configs/colibri_imx6_defconfig
+++ b/configs/colibri_imx6_defconfig
@@ -55,7 +55,6 @@ CONFIG_CMD_USB=y
CONFIG_CMD_USB_SDP=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_NFS is not set
-CONFIG_CMD_BMP=y
CONFIG_CMD_BOOTCOUNT=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
@@ -104,13 +103,4 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x1b67
CONFIG_USB_GADGET_PRODUCT_NUM=0x4000
CONFIG_CI_UDC=y
CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_DM_VIDEO=y
-CONFIG_VIDEO_LOGO=y
-# CONFIG_VIDEO_BPP8 is not set
-# CONFIG_VIDEO_BPP32 is not set
-CONFIG_SYS_WHITE_ON_BLACK=y
-CONFIG_VIDEO_IPUV3=y
-CONFIG_SPLASH_SCREEN=y
-CONFIG_SPLASH_SCREEN_ALIGN=y
-CONFIG_BMP_16BPP=y
CONFIG_OF_LIBFDT_OVERLAY=y
diff --git a/configs/colibri_imx7_defconfig b/configs/colibri_imx7_defconfig
index 52518128e6c..0d9d4caa966 100644
--- a/configs/colibri_imx7_defconfig
+++ b/configs/colibri_imx7_defconfig
@@ -40,7 +40,6 @@ CONFIG_CMD_NAND_TORTURE=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_BOOTP_PXE is not set
-CONFIG_CMD_BMP=y
CONFIG_CMD_BOOTCOUNT=y
CONFIG_CMD_CACHE=y
# CONFIG_CMD_HASH is not set
@@ -90,12 +89,5 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x1b67
CONFIG_USB_GADGET_PRODUCT_NUM=0x4000
CONFIG_CI_UDC=y
CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_DM_VIDEO=y
-CONFIG_VIDEO_LOGO=y
-CONFIG_SYS_WHITE_ON_BLACK=y
-CONFIG_VIDEO_MXS=y
-CONFIG_SPLASH_SCREEN=y
-CONFIG_SPLASH_SCREEN_ALIGN=y
-CONFIG_BMP_16BPP=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_FDT_FIXUP_PARTITIONS=y
diff --git a/configs/colibri_imx7_emmc_defconfig b/configs/colibri_imx7_emmc_defconfig
index e22278a7bcf..25848a35635 100644
--- a/configs/colibri_imx7_emmc_defconfig
+++ b/configs/colibri_imx7_emmc_defconfig
@@ -38,7 +38,6 @@ CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
-CONFIG_CMD_BMP=y
CONFIG_CMD_BOOTCOUNT=y
CONFIG_CMD_CACHE=y
# CONFIG_CMD_HASH is not set
@@ -83,10 +82,4 @@ CONFIG_USB_GADGET_MANUFACTURER="Toradex"
CONFIG_USB_GADGET_VENDOR_NUM=0x1b67
CONFIG_USB_GADGET_PRODUCT_NUM=0x4000
CONFIG_CI_UDC=y
-CONFIG_DM_VIDEO=y
-CONFIG_VIDEO_LOGO=y
-CONFIG_SYS_WHITE_ON_BLACK=y
-CONFIG_SPLASH_SCREEN=y
-CONFIG_SPLASH_SCREEN_ALIGN=y
-CONFIG_BMP_16BPP=y
CONFIG_OF_LIBFDT_OVERLAY=y
diff --git a/configs/colibri_t20_defconfig b/configs/colibri_t20_defconfig
index b883fc105f5..00f45dc115f 100644
--- a/configs/colibri_t20_defconfig
+++ b/configs/colibri_t20_defconfig
@@ -25,7 +25,6 @@ CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_NFS is not set
-CONFIG_CMD_BMP=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
@@ -69,8 +68,4 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x1b67
CONFIG_USB_GADGET_PRODUCT_NUM=0x4000
CONFIG_CI_UDC=y
CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_DM_VIDEO=y
-# CONFIG_VIDEO_BPP8 is not set
-CONFIG_VIDEO_TEGRA20=y
-CONFIG_CONSOLE_SCROLL_LINES=10
CONFIG_OF_LIBFDT_OVERLAY=y
diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig
index 8cf8a31beb0..335e21c010f 100644
--- a/configs/colibri_vf_defconfig
+++ b/configs/colibri_vf_defconfig
@@ -51,7 +51,6 @@ CONFIG_CMD_DHCP=y
# CONFIG_CMD_NFS is not set
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
-CONFIG_CMD_BMP=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
@@ -98,11 +97,6 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x1b67
CONFIG_USB_GADGET_PRODUCT_NUM=0x4000
CONFIG_CI_UDC=y
CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_DM_VIDEO=y
-# CONFIG_VIDEO_BPP8 is not set
-# CONFIG_VIDEO_BPP16 is not set
-CONFIG_VIDEO_FSL_DCU_FB=y
-CONFIG_SPLASH_SCREEN_ALIGN=y
CONFIG_OF_LIBFDT_OVERLAY=y
CONFIG_FDT_FIXUP_PARTITIONS=y
# CONFIG_EFI_LOADER is not set
--
2.34.1
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v1 05/24] toradex: set default dhcp distroboot scriptname
2022-04-08 8:06 [PATCH v1 00/24] toradex updates: assortment of fixes and improvements Marcel Ziswiler
` (3 preceding siblings ...)
2022-04-08 8:06 ` [PATCH v1 04/24] toradex: globally disable video support Marcel Ziswiler
@ 2022-04-08 8:07 ` Marcel Ziswiler
2022-04-08 8:07 ` [PATCH v1 06/24] toradex: drop legacy nfsboot script Marcel Ziswiler
` (19 subsequent siblings)
24 siblings, 0 replies; 42+ messages in thread
From: Marcel Ziswiler @ 2022-04-08 8:07 UTC (permalink / raw)
To: u-boot; +Cc: Igor Opaniuk, Marcel Ziswiler
From: Igor Opaniuk <igor.opaniuk@toradex.com>
Use the same name of DHCP Distroboot script as in regular eMMC case.
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
include/configs/apalis-imx8.h | 1 +
include/configs/apalis-tk1.h | 1 +
include/configs/apalis_imx6.h | 1 +
include/configs/apalis_t30.h | 3 ++-
include/configs/colibri-imx6ull.h | 1 +
include/configs/colibri-imx8x.h | 1 +
include/configs/colibri_imx6.h | 1 +
include/configs/colibri_imx7.h | 1 +
include/configs/colibri_t20.h | 1 +
include/configs/colibri_t30.h | 3 ++-
include/configs/colibri_vf.h | 1 +
include/configs/verdin-imx8mm.h | 1 +
12 files changed, 14 insertions(+), 2 deletions(-)
diff --git a/include/configs/apalis-imx8.h b/include/configs/apalis-imx8.h
index c87bcd475ef..a45a6ffe7c9 100644
--- a/include/configs/apalis-imx8.h
+++ b/include/configs/apalis-imx8.h
@@ -38,6 +38,7 @@
BOOTENV \
MEM_LAYOUT_ENV_SETTINGS \
"boot_file=Image\0" \
+ "boot_script_dhcp=boot.scr\0" \
"console=ttyLP1 earlycon\0" \
"fdt_addr=0x83000000\0" \
"fdt_file=fsl-imx8qm-apalis-eval.dtb\0" \
diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h
index 57192649ecc..a961812313d 100644
--- a/include/configs/apalis-tk1.h
+++ b/include/configs/apalis-tk1.h
@@ -71,6 +71,7 @@
#define BOARD_EXTRA_ENV_SETTINGS \
"boot_file=zImage\0" \
+ "boot_script_dhcp=boot.scr\0" \
"console=ttyS0\0" \
"defargs=lp0_vec=2064@0xf46ff000 core_edp_mv=1150 core_edp_ma=4000 " \
"usb_port_owner_info=2 lane_owner_info=6 emc_max_dvfs=0 " \
diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
index bbdcab29d8f..ce7a08ea371 100644
--- a/include/configs/apalis_imx6.h
+++ b/include/configs/apalis_imx6.h
@@ -109,6 +109,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
BOOTENV \
"boot_file=zImage\0" \
+ "boot_script_dhcp=boot.scr\0" \
"console=ttymxc0\0" \
"defargs=enable_wait_mode=off vmalloc=400M\0" \
"fdt_file=" FDT_FILE "\0" \
diff --git a/include/configs/apalis_t30.h b/include/configs/apalis_t30.h
index eab4f22be34..33f2a3be2a0 100644
--- a/include/configs/apalis_t30.h
+++ b/include/configs/apalis_t30.h
@@ -47,7 +47,8 @@
"mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \
#define BOARD_EXTRA_ENV_SETTINGS \
- UBOOT_UPDATE
+ UBOOT_UPDATE \
+ "boot_script_dhcp=boot.scr\0"
#include "tegra-common-usb-gadget.h"
#include "tegra-common-post.h"
diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h
index 91f0f953a12..009c4d6f692 100644
--- a/include/configs/colibri-imx6ull.h
+++ b/include/configs/colibri-imx6ull.h
@@ -101,6 +101,7 @@
NFS_BOOTCMD \
UBI_BOOTCMD \
UBOOT_UPDATE \
+ "boot_script_dhcp=boot.scr\0" \
"bootubipart=ubi\0" \
"console=ttymxc0\0" \
"defargs=user_debug=30\0" \
diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h
index 008fa6ef076..ee070408d41 100644
--- a/include/configs/colibri-imx8x.h
+++ b/include/configs/colibri-imx8x.h
@@ -67,6 +67,7 @@
M4_BOOT_ENV \
MEM_LAYOUT_ENV_SETTINGS \
"boot_file=Image\0" \
+ "boot_script_dhcp=boot.scr\0" \
"consoleargs=console=ttyLP3,${baudrate} earlycon\0" \
"fdt_addr=0x83000000\0" \
"fdt_file=fsl-imx8qxp-colibri-dsihdmi-eval-v3.dtb\0" \
diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
index 1dbc77dde1c..ead88bb42d2 100644
--- a/include/configs/colibri_imx6.h
+++ b/include/configs/colibri_imx6.h
@@ -93,6 +93,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
BOOTENV \
"boot_file=zImage\0" \
+ "boot_script_dhcp=boot.scr\0" \
"console=ttymxc0\0" \
"defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
"fdt_file=" FDT_FILE "\0" \
diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
index 92e24ea8c61..1f608c67d01 100644
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -140,6 +140,7 @@
MODULE_EXTRA_ENV_SETTINGS \
UBOOT_UPDATE \
"boot_file=zImage\0" \
+ "boot_script_dhcp=boot.scr\0" \
"bootubipart=ubi\0" \
"console=ttymxc0\0" \
"defargs=\0" \
diff --git a/include/configs/colibri_t20.h b/include/configs/colibri_t20.h
index c377187b803..3752581a27b 100644
--- a/include/configs/colibri_t20.h
+++ b/include/configs/colibri_t20.h
@@ -27,6 +27,7 @@
/* Environment in NAND, 64K is a bit excessive but erase block is 512K anyway */
#define BOARD_EXTRA_ENV_SETTINGS \
+ "boot_script_dhcp=boot.scr\0" \
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
UBOOT_UPDATE
diff --git a/include/configs/colibri_t30.h b/include/configs/colibri_t30.h
index 324e607839a..ca8ddf26f80 100644
--- a/include/configs/colibri_t30.h
+++ b/include/configs/colibri_t30.h
@@ -45,7 +45,8 @@
"mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \
#define BOARD_EXTRA_ENV_SETTINGS \
- UBOOT_UPDATE
+ UBOOT_UPDATE \
+ "boot_script_dhcp=boot.scr\0"
#include "tegra-common-usb-gadget.h"
#include "tegra-common-post.h"
diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 62f85185b76..164c0e71d20 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -82,6 +82,7 @@
NFS_BOOTCMD \
UBI_BOOTCMD \
UBOOT_UPDATE \
+ "boot_script_dhcp=boot.scr\0" \
"console=ttyLP0\0" \
"defargs=user_debug=30\0" \
"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h
index 17583c0a6af..c734c5c0c88 100644
--- a/include/configs/verdin-imx8mm.h
+++ b/include/configs/verdin-imx8mm.h
@@ -53,6 +53,7 @@
MEM_LAYOUT_ENV_SETTINGS \
"bootcmd_mfg=fastboot 0\0" \
"boot_file=Image\0" \
+ "boot_script_dhcp=boot.scr\0" \
"console=ttymxc0\0" \
"fdt_addr=0x43000000\0" \
"fdt_board=dev\0" \
--
2.34.1
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v1 06/24] toradex: drop legacy nfsboot script
2022-04-08 8:06 [PATCH v1 00/24] toradex updates: assortment of fixes and improvements Marcel Ziswiler
` (4 preceding siblings ...)
2022-04-08 8:07 ` [PATCH v1 05/24] toradex: set default dhcp distroboot scriptname Marcel Ziswiler
@ 2022-04-08 8:07 ` Marcel Ziswiler
2022-04-08 8:07 ` [PATCH v1 07/24] include: colibri_vf: add missing tdxargs variable Marcel Ziswiler
` (18 subsequent siblings)
24 siblings, 0 replies; 42+ messages in thread
From: Marcel Ziswiler @ 2022-04-08 8:07 UTC (permalink / raw)
To: u-boot; +Cc: Igor Opaniuk, Marcel Ziswiler
From: Igor Opaniuk <igor.opaniuk@toradex.com>
Drop legacy nfsboot script in favor of distroboot DHCP boot.
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
include/configs/apalis-imx8.h | 5 -----
include/configs/apalis-tk1.h | 11 -----------
include/configs/apalis_imx6.h | 11 -----------
include/configs/colibri-imx6ull.h | 10 ----------
include/configs/colibri-imx8x.h | 6 ------
include/configs/colibri_imx6.h | 11 -----------
include/configs/colibri_imx7.h | 10 ----------
include/configs/colibri_vf.h | 10 ----------
include/configs/verdin-imx8mm.h | 6 ------
include/configs/verdin-imx8mp.h | 6 ------
10 files changed, 86 deletions(-)
diff --git a/include/configs/apalis-imx8.h b/include/configs/apalis-imx8.h
index a45a6ffe7c9..a9e0dee3f56 100644
--- a/include/configs/apalis-imx8.h
+++ b/include/configs/apalis-imx8.h
@@ -50,11 +50,6 @@
"root=PARTUUID=${uuid} rootwait " \
"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
"mmcpart=1\0" \
- "netargs=setenv bootargs console=${console},${baudrate} " \
- "root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp" \
- "\0" \
- "nfsboot=run netargs; dhcp ${loadaddr} ${boot_file}; tftp ${fdt_addr} " \
- "apalis-imx8/${fdt_file}; booti ${loadaddr} - ${fdt_addr}\0" \
"panel=NULL\0" \
"script=boot.scr\0" \
"update_uboot=askenv confirm Did you load u-boot-dtb.imx (y/N)?; " \
diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h
index a961812313d..178a219e7cd 100644
--- a/include/configs/apalis-tk1.h
+++ b/include/configs/apalis-tk1.h
@@ -59,16 +59,6 @@
"update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
"mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0" \
-#define NFS_BOOTCMD \
- "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
- "nfsboot=pci enum; run setup; setenv bootargs ${defargs} ${nfsargs} " \
- "${setupargs} ${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
- "run nfsdtbload; dhcp ${kernel_addr_r} " \
- "&& run fdt_fixup && bootz ${kernel_addr_r} - ${dtbparam}\0" \
- "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} " \
- "${soc}-${fdt_module}-${fdt_board}.dtb " \
- "&& setenv dtbparam ${fdt_addr_r}\0"
-
#define BOARD_EXTRA_ENV_SETTINGS \
"boot_file=zImage\0" \
"boot_script_dhcp=boot.scr\0" \
@@ -80,7 +70,6 @@
"fdt_board=eval\0" \
"fdt_fixup=;\0" \
"fdt_module=" FDT_MODULE "\0" \
- NFS_BOOTCMD \
UBOOT_UPDATE \
"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
"00:14:2d:00:00:00; fi; pci enum && tftpboot ${loadaddr} " \
diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
index ce7a08ea371..9a611b163ab 100644
--- a/include/configs/apalis_imx6.h
+++ b/include/configs/apalis_imx6.h
@@ -90,16 +90,6 @@
"ramdisk_addr_r=0x12200000\0" \
"scriptaddr=0x17000000\0"
-#define NFS_BOOTCMD \
- "nfsargs=ip=:::::eth0:on root=/dev/nfs ro\0" \
- "nfsboot=run setup; " \
- "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
- "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
- "run nfsdtbload; dhcp ${kernel_addr_r} " \
- "&& run fdt_fixup && bootz ${kernel_addr_r} ${dtbparam}\0" \
- "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
- "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
-
#ifndef CONFIG_TDX_APALIS_IMX6_V1_0
#define FDT_FILE "imx6q-apalis-eval.dtb"
#define FDT_FILE_V1_0 "imx6q-apalis_v1_0-eval.dtb"
@@ -116,7 +106,6 @@
"fdtfile=" FDT_FILE "\0" \
"fdt_fixup=;\0" \
MEM_LAYOUT_ENV_SETTINGS \
- NFS_BOOTCMD \
UBOOT_UPDATE \
"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h
index 009c4d6f692..654b246b80f 100644
--- a/include/configs/colibri-imx6ull.h
+++ b/include/configs/colibri-imx6ull.h
@@ -50,15 +50,6 @@
"ramdisk_addr_r=0x82200000\0" \
"scriptaddr=0x87000000\0"
-#define NFS_BOOTCMD \
- "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
- "nfsboot=run setup; " \
- "setenv bootargs ${defargs} ${nfsargs} " \
- "${setupargs} ${vidargs}; echo Booting from NFS...;" \
- "dhcp ${kernel_addr_r} && " \
- "tftp ${fdt_addr_r} ${fdtfile} && " \
- "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
-
#define UBI_BOOTCMD \
"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rw rootfstype=ubifs " \
"ubi.fm_autoconvert=1\0" \
@@ -98,7 +89,6 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
BOOTENV \
MEM_LAYOUT_ENV_SETTINGS \
- NFS_BOOTCMD \
UBI_BOOTCMD \
UBOOT_UPDATE \
"boot_script_dhcp=boot.scr\0" \
diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h
index ee070408d41..ae5a8ff6a93 100644
--- a/include/configs/colibri-imx8x.h
+++ b/include/configs/colibri-imx8x.h
@@ -80,12 +80,6 @@
"root=PARTUUID=${uuid} rootwait " \
"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
"mmcpart=1\0" \
- "netargs=setenv bootargs ${consoleargs} " \
- "root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp " \
- "${vidargs}\0" \
- "nfsboot=run netargs; dhcp ${loadaddr} ${image}; tftp ${fdt_addr} " \
- "colibri-imx8x/${fdt_file}; booti ${loadaddr} - " \
- "${fdt_addr}\0" \
"panel=NULL\0" \
"script=boot.scr\0" \
"update_uboot=askenv confirm Did you load u-boot-dtb.imx (y/N)?; " \
diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
index ead88bb42d2..ff3f3636ede 100644
--- a/include/configs/colibri_imx6.h
+++ b/include/configs/colibri_imx6.h
@@ -79,16 +79,6 @@
"ramdisk_addr_r=0x12200000\0" \
"scriptaddr=0x17000000\0"
-#define NFS_BOOTCMD \
- "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
- "nfsboot=run setup; " \
- "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
- "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
- "run nfsdtbload; dhcp ${kernel_addr_r} " \
- "&& run fdt_fixup && bootz ${kernel_addr_r} ${dtbparam}\0" \
- "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
- "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
-
#define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
#define CONFIG_EXTRA_ENV_SETTINGS \
BOOTENV \
@@ -100,7 +90,6 @@
"fdtfile=" FDT_FILE "\0" \
"fdt_fixup=;\0" \
MEM_LAYOUT_ENV_SETTINGS \
- NFS_BOOTCMD \
UBOOT_UPDATE \
"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
index 1f608c67d01..276667bb945 100644
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -89,15 +89,6 @@
"ramdisk_addr_r=0x82100000\0" \
"scriptaddr=0x87000000\0"
-#define NFS_BOOTCMD \
- "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
- "nfsboot=run setup; " \
- "setenv bootargs ${defargs} ${nfsargs} " \
- "${setupargs} ${vidargs}; echo Booting from NFS...;" \
- "dhcp ${kernel_addr_r} && " \
- "tftp ${fdt_addr_r} ${soc}-colibri${variant}-${fdt_board}.dtb && " \
- "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
-
#define UBI_BOOTCMD \
"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
"ubi.fm_autoconvert=1\0" \
@@ -136,7 +127,6 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
BOOTENV \
MEM_LAYOUT_ENV_SETTINGS \
- NFS_BOOTCMD \
MODULE_EXTRA_ENV_SETTINGS \
UBOOT_UPDATE \
"boot_file=zImage\0" \
diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 164c0e71d20..68a2f3f3a3d 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -46,15 +46,6 @@
"update_uboot=nand erase.part u-boot && " \
"nand write ${loadaddr} u-boot ${filesize}\0" \
-#define NFS_BOOTCMD \
- "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
- "nfsboot=run setup; " \
- "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
- "${setupargs} ${vidargs}; echo Booting from NFS...;" \
- "dhcp ${kernel_addr_r} && " \
- "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
- "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
-
#define UBI_BOOTCMD \
"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
"ubi.fm_autoconvert=1\0" \
@@ -79,7 +70,6 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
BOOTENV \
MEM_LAYOUT_ENV_SETTINGS \
- NFS_BOOTCMD \
UBI_BOOTCMD \
UBOOT_UPDATE \
"boot_script_dhcp=boot.scr\0" \
diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h
index c734c5c0c88..a53f43d9236 100644
--- a/include/configs/verdin-imx8mm.h
+++ b/include/configs/verdin-imx8mm.h
@@ -59,12 +59,6 @@
"fdt_board=dev\0" \
"initrd_addr=0x43800000\0" \
"initrd_high=0xffffffffffffffff\0" \
- "netargs=setenv bootargs console=${console},${baudrate} " \
- "root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp" \
- "\0" \
- "nfsboot=run netargs; dhcp ${loadaddr} ${boot_file}; " \
- "tftp ${fdt_addr} verdin/${fdtfile}; " \
- "booti ${loadaddr} - ${fdt_addr}\0" \
"setup=setenv setupargs console=${console},${baudrate} " \
"console=tty1 consoleblank=0 earlycon\0" \
"update_uboot=askenv confirm Did you load flash.bin (y/N)?; " \
diff --git a/include/configs/verdin-imx8mp.h b/include/configs/verdin-imx8mp.h
index f8b4bf2df9b..5d0df0ac67a 100644
--- a/include/configs/verdin-imx8mp.h
+++ b/include/configs/verdin-imx8mp.h
@@ -84,12 +84,6 @@
"fdt_board=dev\0" \
"initrd_addr=0x43800000\0" \
"initrd_high=0xffffffffffffffff\0" \
- "netargs=setenv bootargs console=${console},${baudrate} " \
- "root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp" \
- "\0" \
- "nfsboot=run netargs; dhcp ${loadaddr} ${boot_file}; " \
- "tftp ${fdt_addr} verdin/${fdtfile}; " \
- "booti ${loadaddr} - ${fdt_addr}\0" \
"setup=setenv setupargs console=${console},${baudrate} console=tty1 " \
"consoleblank=0 earlycon\0" \
"update_uboot=askenv confirm Did you load flash.bin (y/N)?; " \
--
2.34.1
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v1 07/24] include: colibri_vf: add missing tdxargs variable
2022-04-08 8:06 [PATCH v1 00/24] toradex updates: assortment of fixes and improvements Marcel Ziswiler
` (5 preceding siblings ...)
2022-04-08 8:07 ` [PATCH v1 06/24] toradex: drop legacy nfsboot script Marcel Ziswiler
@ 2022-04-08 8:07 ` Marcel Ziswiler
2022-04-12 18:43 ` sbabic
2022-04-08 8:07 ` [PATCH v1 08/24] colibri-imx6ull: drop vidargs and remove video= settings Marcel Ziswiler
` (17 subsequent siblings)
24 siblings, 1 reply; 42+ messages in thread
From: Marcel Ziswiler @ 2022-04-08 8:07 UTC (permalink / raw)
To: u-boot; +Cc: Philippe Schenker, Marcel Ziswiler
From: Philippe Schenker <philippe.schenker@toradex.com>
All the other NAND-based boards have tdxargs specified for setting
manual kernel command-line arguments.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
include/configs/colibri_vf.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 68a2f3f3a3d..22ba7f44e61 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -51,7 +51,7 @@
"ubi.fm_autoconvert=1\0" \
"ubiboot=run setup; " \
"setenv bootargs ${defargs} ${ubiargs} ${mtdparts} " \
- "${setupargs} ${vidargs}; echo Booting from NAND...; " \
+ "${setupargs} ${vidargs} ${tdxargs}; echo Booting from NAND...; " \
"ubi part ubi && " \
"ubi read ${kernel_addr_r} kernel && " \
"ubi read ${fdt_addr_r} dtb && " \
--
2.34.1
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v1 08/24] colibri-imx6ull: drop vidargs and remove video= settings
2022-04-08 8:06 [PATCH v1 00/24] toradex updates: assortment of fixes and improvements Marcel Ziswiler
` (6 preceding siblings ...)
2022-04-08 8:07 ` [PATCH v1 07/24] include: colibri_vf: add missing tdxargs variable Marcel Ziswiler
@ 2022-04-08 8:07 ` Marcel Ziswiler
2022-04-12 18:47 ` sbabic
2022-04-08 8:07 ` [PATCH v1 09/24] configs: toradex: enable missing fit options Marcel Ziswiler
` (16 subsequent siblings)
24 siblings, 1 reply; 42+ messages in thread
From: Marcel Ziswiler @ 2022-04-08 8:07 UTC (permalink / raw)
To: u-boot; +Cc: Oleksandr Suvorov, Marcel Ziswiler
From: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Since we envision using overlays for display interfaces, the video=
settings within vidargs are obsolete. Remove these settings from the
U-Boot.
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
include/configs/colibri-imx6ull.h | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h
index 654b246b80f..12bc41db5e3 100644
--- a/include/configs/colibri-imx6ull.h
+++ b/include/configs/colibri-imx6ull.h
@@ -114,9 +114,7 @@
"${board}/flash_blk.img && source ${loadaddr}\0" \
"splashpos=m,m\0" \
"splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
- "videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \
- "vidargs=video=mxsfb:640x480M-16@60"
-
+ "videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0"
/* Physical Memory Map */
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
--
2.34.1
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v1 09/24] configs: toradex: enable missing fit options
2022-04-08 8:06 [PATCH v1 00/24] toradex updates: assortment of fixes and improvements Marcel Ziswiler
` (7 preceding siblings ...)
2022-04-08 8:07 ` [PATCH v1 08/24] colibri-imx6ull: drop vidargs and remove video= settings Marcel Ziswiler
@ 2022-04-08 8:07 ` Marcel Ziswiler
2022-04-08 8:07 ` [PATCH v1 10/24] configs: colibri-imx7/-emmc: enable booting from usb sdp Marcel Ziswiler
` (15 subsequent siblings)
24 siblings, 0 replies; 42+ messages in thread
From: Marcel Ziswiler @ 2022-04-08 8:07 UTC (permalink / raw)
To: u-boot; +Cc: Oleksandr Suvorov, Marcel Ziswiler
From: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Add missing support of FIT-images and enable a verbosity for
this feature.
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
configs/apalis-imx8_defconfig | 1 +
configs/apalis-tk1_defconfig | 1 +
configs/apalis_imx6_defconfig | 1 +
configs/colibri-imx6ull-emmc_defconfig | 1 +
configs/colibri-imx6ull_defconfig | 1 +
configs/colibri-imx8x_defconfig | 1 +
configs/colibri_imx6_defconfig | 1 +
configs/colibri_imx7_defconfig | 2 ++
configs/colibri_imx7_emmc_defconfig | 1 +
configs/verdin-imx8mm_defconfig | 1 +
10 files changed, 11 insertions(+)
diff --git a/configs/apalis-imx8_defconfig b/configs/apalis-imx8_defconfig
index 43215faeb93..3ad539c4f2f 100644
--- a/configs/apalis-imx8_defconfig
+++ b/configs/apalis-imx8_defconfig
@@ -15,6 +15,7 @@ CONFIG_DISTRO_DEFAULTS=y
CONFIG_REMAKE_ELF=y
CONFIG_SYS_LOAD_ADDR=0x80280000
CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_LOG=y
# CONFIG_DISPLAY_BOARDINFO is not set
diff --git a/configs/apalis-tk1_defconfig b/configs/apalis-tk1_defconfig
index 9645c2f2108..e098b1171ee 100644
--- a/configs/apalis-tk1_defconfig
+++ b/configs/apalis-tk1_defconfig
@@ -12,6 +12,7 @@ CONFIG_TEGRA124=y
CONFIG_TARGET_APALIS_TK1=y
CONFIG_SYS_LOAD_ADDR=0x81000000
CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_BOOTDELAY=1
CONFIG_BOOTCOMMAND="setenv fdtfile ${soc}-${fdt_module}-${fdt_board}.dtb && run distro_bootcmd"
diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig
index 382092294e3..86216b6e034 100644
--- a/configs/apalis_imx6_defconfig
+++ b/configs/apalis_imx6_defconfig
@@ -26,6 +26,7 @@ CONFIG_CMD_HDMIDETECT=y
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
CONFIG_BOOTDELAY=1
CONFIG_BOOTCOMMAND="run distro_bootcmd; usb start; setenv stdout serial,vidconsole; setenv stdin serial,usbkbd"
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
diff --git a/configs/colibri-imx6ull-emmc_defconfig b/configs/colibri-imx6ull-emmc_defconfig
index 3483fa6fc45..5b64682d066 100644
--- a/configs/colibri-imx6ull-emmc_defconfig
+++ b/configs/colibri-imx6ull-emmc_defconfig
@@ -13,6 +13,7 @@ CONFIG_TARGET_COLIBRI_IMX6ULL_EMMC=y
CONFIG_DEFAULT_DEVICE_TREE="imx6ull-colibri-emmc"
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
CONFIG_BOOTDELAY=1
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="setenv fdtfile imx6ull-colibri${variant}-${fdt_board}.dtb"
diff --git a/configs/colibri-imx6ull_defconfig b/configs/colibri-imx6ull_defconfig
index de35fbcabf6..764bce1de89 100644
--- a/configs/colibri-imx6ull_defconfig
+++ b/configs/colibri-imx6ull_defconfig
@@ -14,6 +14,7 @@ CONFIG_TARGET_COLIBRI_IMX6ULL_NAND=y
CONFIG_DEFAULT_DEVICE_TREE="imx6ull-colibri"
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
CONFIG_BOOTDELAY=1
CONFIG_BOOTCOMMAND="run ubiboot || run distro_bootcmd;"
CONFIG_USE_PREBOOT=y
diff --git a/configs/colibri-imx8x_defconfig b/configs/colibri-imx8x_defconfig
index 04f7f5b0fde..645ddcef536 100644
--- a/configs/colibri-imx8x_defconfig
+++ b/configs/colibri-imx8x_defconfig
@@ -15,6 +15,7 @@ CONFIG_DISTRO_DEFAULTS=y
CONFIG_REMAKE_ELF=y
CONFIG_SYS_LOAD_ADDR=0x80280000
CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
CONFIG_LOG=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig
index 03f2f88688b..fed1ece5709 100644
--- a/configs/colibri_imx6_defconfig
+++ b/configs/colibri_imx6_defconfig
@@ -25,6 +25,7 @@ CONFIG_SPL=y
CONFIG_CMD_HDMIDETECT=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
CONFIG_BOOTDELAY=1
CONFIG_BOOTCOMMAND="run distro_bootcmd; usb start; setenv stdout serial,vidconsole; setenv stdin serial,usbkbd"
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
diff --git a/configs/colibri_imx7_defconfig b/configs/colibri_imx7_defconfig
index 0d9d4caa966..2db2fbc86ca 100644
--- a/configs/colibri_imx7_defconfig
+++ b/configs/colibri_imx7_defconfig
@@ -13,6 +13,8 @@ CONFIG_IMX_RDC=y
CONFIG_IMX_BOOTAUX=y
CONFIG_IMX_HAB=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
CONFIG_BOOTDELAY=1
CONFIG_BOOTCOMMAND="run ubiboot ; echo ; echo ubiboot failed ; run distro_bootcmd;"
CONFIG_USE_PREBOOT=y
diff --git a/configs/colibri_imx7_emmc_defconfig b/configs/colibri_imx7_emmc_defconfig
index 25848a35635..b369c1dc319 100644
--- a/configs/colibri_imx7_emmc_defconfig
+++ b/configs/colibri_imx7_emmc_defconfig
@@ -15,6 +15,7 @@ CONFIG_IMX_BOOTAUX=y
CONFIG_IMX_HAB=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
CONFIG_BOOTDELAY=1
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="setenv fdtfile ${soc}-colibri-emmc-${fdt_board}.dtb"
diff --git a/configs/verdin-imx8mm_defconfig b/configs/verdin-imx8mm_defconfig
index 7a81ae6d374..78c4eaa1f34 100644
--- a/configs/verdin-imx8mm_defconfig
+++ b/configs/verdin-imx8mm_defconfig
@@ -22,6 +22,7 @@ CONFIG_DISTRO_DEFAULTS=y
CONFIG_SYS_LOAD_ADDR=0x40480000
CONFIG_FIT=y
CONFIG_FIT_EXTERNAL_OFFSET=0x3000
+CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_OF_SYSTEM_SETUP=y
--
2.34.1
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v1 10/24] configs: colibri-imx7/-emmc: enable booting from usb sdp
2022-04-08 8:06 [PATCH v1 00/24] toradex updates: assortment of fixes and improvements Marcel Ziswiler
` (8 preceding siblings ...)
2022-04-08 8:07 ` [PATCH v1 09/24] configs: toradex: enable missing fit options Marcel Ziswiler
@ 2022-04-08 8:07 ` Marcel Ziswiler
2022-04-08 8:07 ` [PATCH v1 11/24] apalis-imx6: avoid save environment unasked Marcel Ziswiler
` (14 subsequent siblings)
24 siblings, 0 replies; 42+ messages in thread
From: Marcel Ziswiler @ 2022-04-08 8:07 UTC (permalink / raw)
To: u-boot; +Cc: Oleksandr Suvorov, Marcel Ziswiler
From: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
For recovery purpose allow booting via SDP over USB as well.
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
configs/colibri_imx7_defconfig | 1 +
configs/colibri_imx7_emmc_defconfig | 1 +
2 files changed, 2 insertions(+)
diff --git a/configs/colibri_imx7_defconfig b/configs/colibri_imx7_defconfig
index 2db2fbc86ca..d81b30fc454 100644
--- a/configs/colibri_imx7_defconfig
+++ b/configs/colibri_imx7_defconfig
@@ -40,6 +40,7 @@ CONFIG_CMD_MTD=y
CONFIG_CMD_NAND_TRIMFFS=y
CONFIG_CMD_NAND_TORTURE=y
CONFIG_CMD_USB=y
+CONFIG_CMD_USB_SDP=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_BOOTP_PXE is not set
CONFIG_CMD_BOOTCOUNT=y
diff --git a/configs/colibri_imx7_emmc_defconfig b/configs/colibri_imx7_emmc_defconfig
index b369c1dc319..465333f91ea 100644
--- a/configs/colibri_imx7_emmc_defconfig
+++ b/configs/colibri_imx7_emmc_defconfig
@@ -38,6 +38,7 @@ CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
+CONFIG_CMD_USB_SDP=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_CMD_BOOTCOUNT=y
CONFIG_CMD_CACHE=y
--
2.34.1
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v1 11/24] apalis-imx6: avoid save environment unasked
2022-04-08 8:06 [PATCH v1 00/24] toradex updates: assortment of fixes and improvements Marcel Ziswiler
` (9 preceding siblings ...)
2022-04-08 8:07 ` [PATCH v1 10/24] configs: colibri-imx7/-emmc: enable booting from usb sdp Marcel Ziswiler
@ 2022-04-08 8:07 ` Marcel Ziswiler
2022-04-12 18:48 ` sbabic
2022-04-08 8:07 ` [PATCH v1 12/24] apalis-tk1: " Marcel Ziswiler
` (13 subsequent siblings)
24 siblings, 1 reply; 42+ messages in thread
From: Marcel Ziswiler @ 2022-04-08 8:07 UTC (permalink / raw)
To: u-boot; +Cc: Denys Drozdov, Marcel Ziswiler
From: Denys Drozdov <denys.drozdov@toradex.com>
U-Boot should never save the environment unasked.
This also avoids storing broken ftd_file to eMMC.
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
board/toradex/apalis_imx6/apalis_imx6.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/board/toradex/apalis_imx6/apalis_imx6.c b/board/toradex/apalis_imx6/apalis_imx6.c
index 25a4cd9f38b..a78d52d3fac 100644
--- a/board/toradex/apalis_imx6/apalis_imx6.c
+++ b/board/toradex/apalis_imx6/apalis_imx6.c
@@ -727,9 +727,6 @@ int board_late_init(void)
if ((fdt_env != NULL) && (strcmp(FDT_FILE, fdt_env) == 0)) {
env_set("fdt_file", FDT_FILE_V1_0);
printf("patching fdt_file to " FDT_FILE_V1_0 "\n");
-#ifndef CONFIG_ENV_IS_NOWHERE
- env_save();
-#endif
}
}
#endif /* CONFIG_TDX_APALIS_IMX6_V1_0 */
--
2.34.1
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v1 12/24] apalis-tk1: avoid save environment unasked
2022-04-08 8:06 [PATCH v1 00/24] toradex updates: assortment of fixes and improvements Marcel Ziswiler
` (10 preceding siblings ...)
2022-04-08 8:07 ` [PATCH v1 11/24] apalis-imx6: avoid save environment unasked Marcel Ziswiler
@ 2022-04-08 8:07 ` Marcel Ziswiler
2022-04-12 18:42 ` sbabic
2022-04-08 8:07 ` [PATCH v1 13/24] board: colibri-imx6ull: Do not leave variant variable unset Marcel Ziswiler
` (12 subsequent siblings)
24 siblings, 1 reply; 42+ messages in thread
From: Marcel Ziswiler @ 2022-04-08 8:07 UTC (permalink / raw)
To: u-boot; +Cc: Denys Drozdov, Marcel Ziswiler
From: Denys Drozdov <denys.drozdov@toradex.com>
U-Boot should never save the environment unasked.
This also avoids storing broken fdt_module to flash.
Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
board/toradex/apalis-tk1/apalis-tk1.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/board/toradex/apalis-tk1/apalis-tk1.c b/board/toradex/apalis-tk1/apalis-tk1.c
index 2769b546010..ccf665b2118 100644
--- a/board/toradex/apalis-tk1/apalis-tk1.c
+++ b/board/toradex/apalis-tk1/apalis-tk1.c
@@ -71,9 +71,6 @@ int arch_misc_init(void)
env_set("fdt_module", FDT_MODULE_V1_0);
printf("patching fdt_module to " FDT_MODULE_V1_0
" for older V1.0 and V1.1 HW\n");
-#ifndef CONFIG_ENV_IS_NOWHERE
- env_save();
-#endif
}
/* activate USB power enable GPIOs */
--
2.34.1
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v1 13/24] board: colibri-imx6ull: Do not leave variant variable unset
2022-04-08 8:06 [PATCH v1 00/24] toradex updates: assortment of fixes and improvements Marcel Ziswiler
` (11 preceding siblings ...)
2022-04-08 8:07 ` [PATCH v1 12/24] apalis-tk1: " Marcel Ziswiler
@ 2022-04-08 8:07 ` Marcel Ziswiler
2022-04-12 18:47 ` sbabic
2022-04-08 8:07 ` [PATCH v1 14/24] configs: tdx: Do not overwrite fdtfile if it got set manually Marcel Ziswiler
` (11 subsequent siblings)
24 siblings, 1 reply; 42+ messages in thread
From: Marcel Ziswiler @ 2022-04-08 8:07 UTC (permalink / raw)
To: u-boot; +Cc: Philippe Schenker, Marcel Ziswiler
From: Philippe Schenker <philippe.schenker@toradex.com>
Toradex uses the variable variant to distinguish between modules with
eMMC, NAND with wifi and NAND without wifi.
This variable is set on every boot. Set this variable also if we have a
NAND module without wifi to prevent issues.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
board/toradex/colibri-imx6ull/colibri-imx6ull.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/board/toradex/colibri-imx6ull/colibri-imx6ull.c b/board/toradex/colibri-imx6ull/colibri-imx6ull.c
index 02ab5889b9a..3244184f272 100644
--- a/board/toradex/colibri-imx6ull/colibri-imx6ull.c
+++ b/board/toradex/colibri-imx6ull/colibri-imx6ull.c
@@ -172,10 +172,14 @@ int board_late_init(void)
} else {
if (is_emmc)
env_set("variant", "-emmc");
+ else
+ env_set("variant", "");
}
#else
if (is_emmc)
env_set("variant", "-emmc");
+ else
+ env_set("variant", "");
#endif
/*
--
2.34.1
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v1 14/24] configs: tdx: Do not overwrite fdtfile if it got set manually
2022-04-08 8:06 [PATCH v1 00/24] toradex updates: assortment of fixes and improvements Marcel Ziswiler
` (12 preceding siblings ...)
2022-04-08 8:07 ` [PATCH v1 13/24] board: colibri-imx6ull: Do not leave variant variable unset Marcel Ziswiler
@ 2022-04-08 8:07 ` Marcel Ziswiler
2022-04-08 8:07 ` [PATCH v1 15/24] regulator: fixed: add possibility to enable by clock Marcel Ziswiler
` (10 subsequent siblings)
24 siblings, 0 replies; 42+ messages in thread
From: Marcel Ziswiler @ 2022-04-08 8:07 UTC (permalink / raw)
To: u-boot; +Cc: Philippe Schenker, Marcel Ziswiler
From: Philippe Schenker <philippe.schenker@toradex.com>
In case a customer wants to set fdtfile currently preboot overrides it
always with preboot just before the bootdelay. Use test -n to check
if fdtfile is already set and only set it if nothing got touched manually
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
configs/colibri-imx6ull-emmc_defconfig | 2 +-
configs/colibri-imx6ull_defconfig | 2 +-
configs/colibri_imx7_defconfig | 2 +-
configs/colibri_imx7_emmc_defconfig | 2 +-
configs/colibri_vf_defconfig | 2 +-
configs/verdin-imx8mm_defconfig | 2 +-
configs/verdin-imx8mp_defconfig | 2 +-
7 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/configs/colibri-imx6ull-emmc_defconfig b/configs/colibri-imx6ull-emmc_defconfig
index 5b64682d066..cd88320b605 100644
--- a/configs/colibri-imx6ull-emmc_defconfig
+++ b/configs/colibri-imx6ull-emmc_defconfig
@@ -16,7 +16,7 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_BOOTDELAY=1
CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="setenv fdtfile imx6ull-colibri${variant}-${fdt_board}.dtb"
+CONFIG_PREBOOT="test -n ${fdtfile} || setenv fdtfile imx6ull-colibri${variant}-${fdt_board}.dtb"
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
diff --git a/configs/colibri-imx6ull_defconfig b/configs/colibri-imx6ull_defconfig
index 764bce1de89..d06cc2f7d82 100644
--- a/configs/colibri-imx6ull_defconfig
+++ b/configs/colibri-imx6ull_defconfig
@@ -18,7 +18,7 @@ CONFIG_FIT_VERBOSE=y
CONFIG_BOOTDELAY=1
CONFIG_BOOTCOMMAND="run ubiboot || run distro_bootcmd;"
CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="setenv fdtfile imx6ull-colibri${variant}-${fdt_board}.dtb"
+CONFIG_PREBOOT="test -n ${fdtfile} || setenv fdtfile imx6ull-colibri${variant}-${fdt_board}.dtb"
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
diff --git a/configs/colibri_imx7_defconfig b/configs/colibri_imx7_defconfig
index d81b30fc454..c00d1938eec 100644
--- a/configs/colibri_imx7_defconfig
+++ b/configs/colibri_imx7_defconfig
@@ -18,7 +18,7 @@ CONFIG_FIT_VERBOSE=y
CONFIG_BOOTDELAY=1
CONFIG_BOOTCOMMAND="run ubiboot ; echo ; echo ubiboot failed ; run distro_bootcmd;"
CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="setenv fdtfile ${soc}-colibri-${fdt_board}.dtb "
+CONFIG_PREBOOT="test -n ${fdtfile} || setenv fdtfile ${soc}-colibri-${fdt_board}.dtb "
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
diff --git a/configs/colibri_imx7_emmc_defconfig b/configs/colibri_imx7_emmc_defconfig
index 465333f91ea..73054449613 100644
--- a/configs/colibri_imx7_emmc_defconfig
+++ b/configs/colibri_imx7_emmc_defconfig
@@ -18,7 +18,7 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_BOOTDELAY=1
CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="setenv fdtfile ${soc}-colibri-emmc-${fdt_board}.dtb"
+CONFIG_PREBOOT="test -n ${fdtfile} || setenv fdtfile ${soc}-colibri-emmc-${fdt_board}.dtb"
# CONFIG_CONSOLE_MUX is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig
index 335e21c010f..caa9ab0aab4 100644
--- a/configs/colibri_vf_defconfig
+++ b/configs/colibri_vf_defconfig
@@ -19,7 +19,7 @@ CONFIG_BOOTDELAY=1
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="run ubiboot || run distro_bootcmd;"
CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="setenv fdtfile ${soc}-colibri-${fdt_board}.dtb"
+CONFIG_PREBOOT="test -n ${fdtfile} || setenv fdtfile ${soc}-colibri-${fdt_board}.dtb"
CONFIG_LOGLEVEL=3
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/verdin-imx8mm_defconfig b/configs/verdin-imx8mm_defconfig
index 78c4eaa1f34..aa89738b44a 100644
--- a/configs/verdin-imx8mm_defconfig
+++ b/configs/verdin-imx8mm_defconfig
@@ -28,7 +28,7 @@ CONFIG_SPL_LOAD_FIT=y
CONFIG_OF_SYSTEM_SETUP=y
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="setenv fdtfile imx8mm-verdin-${variant}-${fdt_board}.dtb"
+CONFIG_PREBOOT="test -n ${fdtfile} || setenv fdtfile imx8mm-verdin-${variant}-${fdt_board}.dtb"
CONFIG_LOG=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/verdin-imx8mp_defconfig b/configs/verdin-imx8mp_defconfig
index 35cc4afd3f5..50729d0be6d 100644
--- a/configs/verdin-imx8mp_defconfig
+++ b/configs/verdin-imx8mp_defconfig
@@ -34,7 +34,7 @@ CONFIG_SPL_LOAD_FIT=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_BOOTDELAY=1
CONFIG_USE_PREBOOT=y
-CONFIG_PREBOOT="setenv fdtfile imx8mp-verdin-${variant}-${fdt_board}.dtb"
+CONFIG_PREBOOT="test -n ${fdtfile} || setenv fdtfile imx8mp-verdin-${variant}-${fdt_board}.dtb"
CONFIG_LOG=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
--
2.34.1
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v1 15/24] regulator: fixed: add possibility to enable by clock
2022-04-08 8:06 [PATCH v1 00/24] toradex updates: assortment of fixes and improvements Marcel Ziswiler
` (13 preceding siblings ...)
2022-04-08 8:07 ` [PATCH v1 14/24] configs: tdx: Do not overwrite fdtfile if it got set manually Marcel Ziswiler
@ 2022-04-08 8:07 ` Marcel Ziswiler
2022-04-12 18:45 ` sbabic
2022-04-08 8:07 ` [PATCH v1 16/24] board: colibri-imx6ull: fix detecting ethernet phy Marcel Ziswiler
` (9 subsequent siblings)
24 siblings, 1 reply; 42+ messages in thread
From: Marcel Ziswiler @ 2022-04-08 8:07 UTC (permalink / raw)
To: u-boot; +Cc: Philippe Schenker, Marcel Ziswiler, Jaehoon Chung
From: Philippe Schenker <philippe.schenker@toradex.com>
This commit adds the possibility to choose the compatible
"regulator-fixed-clock" in devicetree.
This is a special case of regulator-fixed where a clock has to
be used to switch the regulator on and off.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
drivers/power/regulator/fixed.c | 60 ++++++++++++++++++++++++++++++++-
1 file changed, 59 insertions(+), 1 deletion(-)
diff --git a/drivers/power/regulator/fixed.c b/drivers/power/regulator/fixed.c
index d3e0fb672d9..90004d1601a 100644
--- a/drivers/power/regulator/fixed.c
+++ b/drivers/power/regulator/fixed.c
@@ -6,14 +6,21 @@
*/
#include <common.h>
+#include <clk.h>
#include <errno.h>
#include <dm.h>
+#include <linux/delay.h>
#include <log.h>
#include <power/pmic.h>
#include <power/regulator.h>
#include "regulator_common.h"
+struct fixed_clock_regulator_plat {
+ struct clk *enable_clock;
+ unsigned int clk_enable_counter;
+};
+
static int fixed_regulator_of_to_plat(struct udevice *dev)
{
struct dm_regulator_uclass_plat *uc_pdata;
@@ -71,6 +78,38 @@ static int fixed_regulator_set_enable(struct udevice *dev, bool enable)
return regulator_common_set_enable(dev, dev_get_plat(dev), enable);
}
+static int fixed_clock_regulator_get_enable(struct udevice *dev)
+{
+ struct fixed_clock_regulator_plat *priv = dev_get_priv(dev);
+
+ return priv->clk_enable_counter > 0;
+}
+
+static int fixed_clock_regulator_set_enable(struct udevice *dev, bool enable)
+{
+ struct fixed_clock_regulator_plat *priv = dev_get_priv(dev);
+ struct regulator_common_plat *dev_pdata = dev_get_plat(dev);
+ int ret = 0;
+
+ if (enable) {
+ ret = clk_enable(priv->enable_clock);
+ priv->clk_enable_counter++;
+ } else {
+ ret = clk_disable(priv->enable_clock);
+ priv->clk_enable_counter--;
+ }
+ if (ret)
+ return ret;
+
+ if (enable && dev_pdata->startup_delay_us)
+ udelay(dev_pdata->startup_delay_us);
+
+ if (!enable && dev_pdata->off_on_delay_us)
+ udelay(dev_pdata->off_on_delay_us);
+
+ return ret;
+}
+
static const struct dm_regulator_ops fixed_regulator_ops = {
.get_value = fixed_regulator_get_value,
.get_current = fixed_regulator_get_current,
@@ -78,16 +117,35 @@ static const struct dm_regulator_ops fixed_regulator_ops = {
.set_enable = fixed_regulator_set_enable,
};
+static const struct dm_regulator_ops fixed_clock_regulator_ops = {
+ .get_enable = fixed_clock_regulator_get_enable,
+ .set_enable = fixed_clock_regulator_set_enable,
+};
+
static const struct udevice_id fixed_regulator_ids[] = {
{ .compatible = "regulator-fixed" },
{ },
};
+static const struct udevice_id fixed_clock_regulator_ids[] = {
+ { .compatible = "regulator-fixed-clock" },
+ { },
+};
+
U_BOOT_DRIVER(regulator_fixed) = {
.name = "regulator_fixed",
.id = UCLASS_REGULATOR,
.ops = &fixed_regulator_ops,
.of_match = fixed_regulator_ids,
.of_to_plat = fixed_regulator_of_to_plat,
- .plat_auto = sizeof(struct regulator_common_plat),
+ .plat_auto = sizeof(struct regulator_common_plat),
+};
+
+U_BOOT_DRIVER(regulator_fixed_clock) = {
+ .name = "regulator_fixed_clk",
+ .id = UCLASS_REGULATOR,
+ .ops = &fixed_clock_regulator_ops,
+ .of_match = fixed_clock_regulator_ids,
+ .of_to_plat = fixed_regulator_of_to_plat,
+ .plat_auto = sizeof(struct fixed_clock_regulator_plat),
};
--
2.34.1
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v1 16/24] board: colibri-imx6ull: fix detecting ethernet phy
2022-04-08 8:06 [PATCH v1 00/24] toradex updates: assortment of fixes and improvements Marcel Ziswiler
` (14 preceding siblings ...)
2022-04-08 8:07 ` [PATCH v1 15/24] regulator: fixed: add possibility to enable by clock Marcel Ziswiler
@ 2022-04-08 8:07 ` Marcel Ziswiler
2022-04-12 18:46 ` sbabic
2022-04-08 8:07 ` [PATCH v1 17/24] board: toradex: drop colibri pxa270 support Marcel Ziswiler
` (8 subsequent siblings)
24 siblings, 1 reply; 42+ messages in thread
From: Marcel Ziswiler @ 2022-04-08 8:07 UTC (permalink / raw)
To: u-boot
Cc: Philippe Schenker, Marcel Ziswiler, Fabio Estevam,
NXP i.MX U-Boot Team, Stefano Babic
From: Philippe Schenker <philippe.schenker@toradex.com>
Now that it is possible to use regulator-fixed-clock make use
of it. This makes U-Boot detect the PHY on first cold-boot.
This commit also adjusts the code in setup_fec and follows
how it is done in mx6ullevk.c
This commit also slows down the boot-process by about 150ms
as it now waits for the regulator-fixed-clock voltage that
drives the PHY to go up.
If you rely on very fast boot-speeds and don't need ethernet
for your boot-process you can safely revert the changes on
imx6ull-colibri.dtsi
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/dts/imx6ull-colibri.dtsi | 13 +++++++++++
.../toradex/colibri-imx6ull/colibri-imx6ull.c | 23 +++++++------------
2 files changed, 21 insertions(+), 15 deletions(-)
diff --git a/arch/arm/dts/imx6ull-colibri.dtsi b/arch/arm/dts/imx6ull-colibri.dtsi
index 1fa9d10412e..cbf037be7eb 100644
--- a/arch/arm/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/dts/imx6ull-colibri.dtsi
@@ -58,6 +58,18 @@
gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; /* USBH_PEN */
vin-supply = <®_5v0>;
};
+
+ reg_eth_phy: regulator-eth-phy {
+ compatible = "regulator-fixed-clock";
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "eth_phy";
+ regulator-type = "voltage";
+ vin-supply = <®_module_3v3>;
+ clocks = <&clks IMX6UL_CLK_ENET2_REF_125M>;
+ startup-delay-us = <150000>;
+ };
};
&adc1 {
@@ -78,6 +90,7 @@
pinctrl-0 = <&pinctrl_enet2>;
phy-mode = "rmii";
phy-handle = <ðphy1>;
+ phy-supply = <®_eth_phy>;
status = "okay";
mdio {
diff --git a/board/toradex/colibri-imx6ull/colibri-imx6ull.c b/board/toradex/colibri-imx6ull/colibri-imx6ull.c
index 3244184f272..ba4e0df2c27 100644
--- a/board/toradex/colibri-imx6ull/colibri-imx6ull.c
+++ b/board/toradex/colibri-imx6ull/colibri-imx6ull.c
@@ -100,28 +100,21 @@ static int setup_fec(void)
struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
int ret;
- /* provide the PHY clock from the i.MX 6 */
+ /*
+ * Use 50MHz anatop loopback REF_CLK2 for ENET2,
+ * clear gpr1[14], set gpr1[18].
+ */
+ clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC2_MASK,
+ IOMUX_GPR1_FEC2_CLOCK_MUX1_SEL_MASK);
+
ret = enable_fec_anatop_clock(1, ENET_50MHZ);
if (ret)
return ret;
- /* Use 50M anatop REF_CLK and output it on ENET2_TX_CLK */
- clrsetbits_le32(&iomuxc_regs->gpr[1],
- IOMUX_GPR1_FEC2_CLOCK_MUX2_SEL_MASK,
- IOMUX_GPR1_FEC2_CLOCK_MUX1_SEL_MASK);
-
- /* give new Ethernet PHY power save mode circuitry time to settle */
- mdelay(300);
+ enable_enet_clk(1);
return 0;
}
-
-int board_phy_config(struct phy_device *phydev)
-{
- if (phydev->drv->config)
- phydev->drv->config(phydev);
- return 0;
-}
#endif /* CONFIG_FEC_MXC */
int board_init(void)
--
2.34.1
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v1 17/24] board: toradex: drop colibri pxa270 support
2022-04-08 8:06 [PATCH v1 00/24] toradex updates: assortment of fixes and improvements Marcel Ziswiler
` (15 preceding siblings ...)
2022-04-08 8:07 ` [PATCH v1 16/24] board: colibri-imx6ull: fix detecting ethernet phy Marcel Ziswiler
@ 2022-04-08 8:07 ` Marcel Ziswiler
2022-04-08 8:07 ` [PATCH v1 18/24] disk: part: add the device search failed log msg Marcel Ziswiler
` (7 subsequent siblings)
24 siblings, 0 replies; 42+ messages in thread
From: Marcel Ziswiler @ 2022-04-08 8:07 UTC (permalink / raw)
To: u-boot
Cc: Marcel Ziswiler, Bharat Gooty, Denys Drozdov, Patrick Delaunay,
Rayagonda Kokatanur, Rick Chen, Sean Anderson, Simon Glass
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
The Colibri PXA270 has been end-of-life since quite a while and would
require more and more maintenance (e.g. DM conversions).
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/Kconfig | 6 -
board/toradex/colibri_pxa270/Kconfig | 23 ---
board/toradex/colibri_pxa270/MAINTAINERS | 6 -
board/toradex/colibri_pxa270/Makefile | 7 -
board/toradex/colibri_pxa270/colibri_pxa270.c | 153 -----------------
board/toradex/common/tdx-cfg-block.c | 19 +--
configs/colibri_pxa270_defconfig | 52 ------
include/configs/colibri_pxa270.h | 158 ------------------
include/configs/pxa-common.h | 27 ---
9 files changed, 1 insertion(+), 450 deletions(-)
delete mode 100644 board/toradex/colibri_pxa270/Kconfig
delete mode 100644 board/toradex/colibri_pxa270/MAINTAINERS
delete mode 100644 board/toradex/colibri_pxa270/Makefile
delete mode 100644 board/toradex/colibri_pxa270/colibri_pxa270.c
delete mode 100644 configs/colibri_pxa270_defconfig
delete mode 100644 include/configs/colibri_pxa270.h
delete mode 100644 include/configs/pxa-common.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 80533943896..0166705e573 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1792,11 +1792,6 @@ config TARGET_TEN64
Support for Traverse Technologies Ten64 board, based
on NXP LS1088A.
-config TARGET_COLIBRI_PXA270
- bool "Support colibri_pxa270"
- select CPU_PXA27X
- select GPIO_EXTRA_HEADER
-
config ARCH_UNIPHIER
bool "Socionext UniPhier SoCs"
select BOARD_LATE_INIT
@@ -2240,7 +2235,6 @@ source "board/seeed/npi_imx6ull/Kconfig"
source "board/socionext/developerbox/Kconfig"
source "board/st/stv0991/Kconfig"
source "board/tcl/sl50/Kconfig"
-source "board/toradex/colibri_pxa270/Kconfig"
source "board/traverse/ten64/Kconfig"
source "board/variscite/dart_6ul/Kconfig"
source "board/vscom/baltos/Kconfig"
diff --git a/board/toradex/colibri_pxa270/Kconfig b/board/toradex/colibri_pxa270/Kconfig
deleted file mode 100644
index f646baa3f05..00000000000
--- a/board/toradex/colibri_pxa270/Kconfig
+++ /dev/null
@@ -1,23 +0,0 @@
-if TARGET_COLIBRI_PXA270
-
-config SYS_BOARD
- default "colibri_pxa270"
-
-config SYS_VENDOR
- default "toradex"
-
-config SYS_CONFIG_NAME
- default "colibri_pxa270"
-
-config TDX_CFG_BLOCK
- default y
-
-config TDX_HAVE_NOR
- default y
-
-config TDX_CFG_BLOCK_OFFSET
- default "262144"
-
-source "board/toradex/common/Kconfig"
-
-endif
diff --git a/board/toradex/colibri_pxa270/MAINTAINERS b/board/toradex/colibri_pxa270/MAINTAINERS
deleted file mode 100644
index b378d7be5a4..00000000000
--- a/board/toradex/colibri_pxa270/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-COLIBRI_PXA270 BOARD
-M: Marek Vasut <marek.vasut@gmail.com>
-S: Maintained
-F: board/toradex/colibri_pxa270/
-F: include/configs/colibri_pxa270.h
-F: configs/colibri_pxa270_defconfig
diff --git a/board/toradex/colibri_pxa270/Makefile b/board/toradex/colibri_pxa270/Makefile
deleted file mode 100644
index ea610cfea92..00000000000
--- a/board/toradex/colibri_pxa270/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Toradex Colibri PXA270 Support
-#
-# Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
-
-obj-y := colibri_pxa270.o
diff --git a/board/toradex/colibri_pxa270/colibri_pxa270.c b/board/toradex/colibri_pxa270/colibri_pxa270.c
deleted file mode 100644
index 25fbf412095..00000000000
--- a/board/toradex/colibri_pxa270/colibri_pxa270.c
+++ /dev/null
@@ -1,153 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Toradex Colibri PXA270 Support
- *
- * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
- * Copyright (C) 2016-2019 Marcel Ziswiler <marcel.ziswiler@toradex.com>
- */
-
-#include <common.h>
-#include <cpu_func.h>
-#include <dm.h>
-#include <init.h>
-#include <net.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa.h>
-#include <asm/arch/regs-mmc.h>
-#include <asm/arch/regs-uart.h>
-#include <asm/global_data.h>
-#include <asm/io.h>
-#include <dm/platdata.h>
-#include <dm/platform_data/pxa_mmc_gen.h>
-#include <dm/platform_data/serial_pxa.h>
-#include <netdev.h>
-#include <serial.h>
-#include <usb.h>
-#include <asm/mach-types.h>
-#include <linux/delay.h>
-#include "../common/tdx-common.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_init(void)
-{
- /* We have RAM, disable cache */
- dcache_disable();
- icache_disable();
-
- /* arch number of Toradex Colibri PXA270 */
- gd->bd->bi_arch_number = MACH_TYPE_COLIBRI;
-
- /* address of boot parameters */
- gd->bd->bi_boot_params = 0xa0000100;
-
- return 0;
-}
-
-int checkboard(void)
-{
- puts("Model: Toradex Colibri PXA270\n");
-
- return 0;
-}
-
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, struct bd_info *bd)
-{
- return ft_common_board_setup(blob, bd);
-}
-#endif
-
-int dram_init(void)
-{
- pxa2xx_dram_init();
- gd->ram_size = PHYS_SDRAM_1_SIZE;
- return 0;
-}
-
-#ifdef CONFIG_CMD_USB
-int board_usb_init(int index, enum usb_init_type init)
-{
- writel((readl(UHCHR) | UHCHR_PCPL | UHCHR_PSPL) &
- ~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE),
- UHCHR);
-
- writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR);
-
- while (UHCHR & UHCHR_FSBIR)
- ;
-
- writel(readl(UHCHR) & ~UHCHR_SSE, UHCHR);
- writel((UHCHIE_UPRIE | UHCHIE_RWIE), UHCHIE);
-
- /* Clear any OTG Pin Hold */
- if (readl(PSSR) & PSSR_OTGPH)
- writel(readl(PSSR) | PSSR_OTGPH, PSSR);
-
- writel(readl(UHCRHDA) & ~(0x200), UHCRHDA);
- writel(readl(UHCRHDA) | 0x100, UHCRHDA);
-
- /* Set port power control mask bits, only 3 ports. */
- writel(readl(UHCRHDB) | (0x7 << 17), UHCRHDB);
-
- /* enable port 2 */
- writel(readl(UP2OCR) | UP2OCR_HXOE | UP2OCR_HXS |
- UP2OCR_DMPDE | UP2OCR_DPPDE, UP2OCR);
-
- return 0;
-}
-
-int board_usb_cleanup(int index, enum usb_init_type init)
-{
- return 0;
-}
-
-void usb_board_stop(void)
-{
- writel(readl(UHCHR) | UHCHR_FHR, UHCHR);
- udelay(11);
- writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR);
-
- writel(readl(UHCCOMS) | 1, UHCCOMS);
- udelay(10);
-
- writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN);
-}
-#endif
-
-#ifdef CONFIG_DRIVER_DM9000
-int board_eth_init(struct bd_info *bis)
-{
- return dm9000_initialize(bis);
-}
-#endif
-
-#ifdef CONFIG_CMD_MMC
-#if !CONFIG_IS_ENABLED(DM_MMC)
-int board_mmc_init(struct bd_info *bis)
-{
- pxa_mmc_register(0);
- return 0;
-}
-#else /* !CONFIG_IS_ENABLED(DM_MMC) */
-static const struct pxa_mmc_plat mmc_plat = {
- .base = (struct pxa_mmc_regs *)MMC0_BASE,
-};
-
-U_BOOT_DRVINFO(pxa_mmcs) = {
- .name = "pxa_mmc",
- .plat = &mmc_plat,
-};
-#endif /* !CONFIG_IS_ENABLED(DM_MMC) */
-#endif
-
-static const struct pxa_serial_plat serial_plat = {
- .base = (struct pxa_uart_regs *)FFUART_BASE,
- .port = FFUART_INDEX,
- .baudrate = CONFIG_BAUDRATE,
-};
-
-U_BOOT_DRVINFO(pxa_serials) = {
- .name = "serial_pxa",
- .plat = &serial_plat,
-};
diff --git a/board/toradex/common/tdx-cfg-block.c b/board/toradex/common/tdx-cfg-block.c
index 0e657a2a0a9..9c87289ae93 100644
--- a/board/toradex/common/tdx-cfg-block.c
+++ b/board/toradex/common/tdx-cfg-block.c
@@ -22,11 +22,6 @@
#else
#define is_cpu_type(cpu) (0)
#endif
-#if defined(CONFIG_CPU_PXA27X)
-#include <asm/arch-pxa/pxa.h>
-#else
-#define cpu_is_pxa27x(cpu) (0)
-#endif
#include <cli.h>
#include <console.h>
#include <env.h>
@@ -369,10 +364,7 @@ static int get_cfgblock_interactive(void)
/* Unknown module by default */
tdx_hw_tag.prodid = 0;
- if (cpu_is_pxa27x())
- sprintf(message, "Is the module the 312 MHz version? [y/N] ");
- else
- sprintf(message, "Is the module an IT version? [y/N] ");
+ sprintf(message, "Is the module an IT version? [y/N] ");
len = cli_readline(message);
it = console_buffer[0];
@@ -500,11 +492,6 @@ static int get_cfgblock_interactive(void)
tdx_hw_tag.prodid = COLIBRI_T20_256MB;
else
tdx_hw_tag.prodid = COLIBRI_T20_512MB;
- } else if (cpu_is_pxa27x()) {
- if (it == 'y' || it == 'Y')
- tdx_hw_tag.prodid = COLIBRI_PXA270_312MHZ;
- else
- tdx_hw_tag.prodid = COLIBRI_PXA270_520MHZ;
}
#if defined(CONFIG_TARGET_APALIS_T30) || defined(CONFIG_TARGET_COLIBRI_T30)
else if (!strcmp("tegra30", soc)) {
@@ -552,10 +539,6 @@ static int get_cfgblock_interactive(void)
tdx_hw_tag.ver_minor = console_buffer[2] - '0';
tdx_hw_tag.ver_assembly = console_buffer[3] - 'A';
- if (cpu_is_pxa27x() && tdx_hw_tag.ver_major == 1)
- tdx_hw_tag.prodid -= (COLIBRI_PXA270_312MHZ -
- COLIBRI_PXA270_V1_312MHZ);
-
while (len < 8) {
sprintf(message, "Enter module serial number: ");
len = cli_readline(message);
diff --git a/configs/colibri_pxa270_defconfig b/configs/colibri_pxa270_defconfig
deleted file mode 100644
index 0116cfa6f85..00000000000
--- a/configs/colibri_pxa270_defconfig
+++ /dev/null
@@ -1,52 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SYS_DCACHE_OFF=y
-CONFIG_ARCH_CPU_INIT=y
-CONFIG_TARGET_COLIBRI_PXA270=y
-CONFIG_SYS_TEXT_BASE=0x0
-CONFIG_SYS_MALLOC_LEN=0x20000
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x40000
-CONFIG_ENV_SECT_SIZE=0x40000
-CONFIG_ENV_VARS_UBOOT_CONFIG=y
-CONFIG_SYS_LOAD_ADDR=0xa0000000
-CONFIG_TIMESTAMP=y
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=tty0 console=ttyS0,115200"
-CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="if fatload mmc 0 0xa0000000 uImage; then bootm 0xa0000000; fi; if usb reset && fatload usb 0 0xa0000000 uImage; then bootm 0xa0000000; fi; bootm 0xc0000;"
-CONFIG_SYS_DEVICE_NULLDEV=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_DISPLAY_BOARDINFO_LATE=y
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-# CONFIG_SYS_LONGHELP is not set
-CONFIG_SYS_PROMPT="$ "
-# CONFIG_CMD_ELF is not set
-# CONFIG_CMD_EXPORTENV is not set
-# CONFIG_CMD_IMPORTENV is not set
-CONFIG_CMD_DM=y
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_MMC=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0x80000
-CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
-CONFIG_DM=y
-CONFIG_PXA_MMC_GENERIC=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_PROTECTION=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_DM_SERIAL=y
-CONFIG_PXA_SERIAL=y
-CONFIG_USB=y
-# CONFIG_REGEX is not set
-CONFIG_OF_LIBFDT=y
diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h
deleted file mode 100644
index 975f745c98a..00000000000
--- a/include/configs/colibri_pxa270.h
+++ /dev/null
@@ -1,158 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Toradex Colibri PXA270 configuration file
- *
- * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
- * Copyright (C) 2015-2016 Marcel Ziswiler <marcel@ziswiler.com>
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Board Configuration Options
- */
-/* Avoid overwriting factory configuration block */
-#define CONFIG_BOARD_SIZE_LIMIT 0x40000
-
-/*
- * Environment settings
- */
-
-/*
- * Serial Console Configuration
- */
-
-/*
- * Bootloader Components Configuration
- */
-
-/* I2C support */
-#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY)
-#define CONFIG_SYS_I2C_PXA
-#define CONFIG_PXA_STD_I2C
-#define CONFIG_PXA_PWR_I2C
-#endif
-
-/* LCD support */
-#ifdef CONFIG_LCD
-#define CONFIG_PXA_LCD
-#define CONFIG_PXA_VGA
-#define CONFIG_LCD_LOGO
-#endif
-
-/*
- * Networking Configuration
- */
-#ifdef CONFIG_CMD_NET
-
-#define CONFIG_DRIVER_DM9000 1
-#define CONFIG_DM9000_BASE 0x08000000
-#define DM9000_IO (CONFIG_DM9000_BASE)
-#define DM9000_DATA (CONFIG_DM9000_BASE + 4)
-#define CONFIG_NET_RETRY_COUNT 10
-
-#define CONFIG_BOOTP_BOOTFILESIZE
-#endif
-
-/*
- * Clock Configuration
- */
-#define CONFIG_SYS_CPUSPEED 0x290 /* 520MHz */
-
-/*
- * DRAM Map
- */
-#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-
-#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */
-#define CONFIG_SYS_DRAM_SIZE 0x04000000 /* 64 MB DRAM */
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR 0x5c010000
-
-/*
- * NOR FLASH
- */
-#ifdef CONFIG_CMD_FLASH
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_32BIT
-
-#define CONFIG_SYS_MAX_FLASH_SECT (4 + 255)
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT (25 * CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_WRITE_TOUT (25 * CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_LOCK_TOUT (25 * CONFIG_SYS_HZ)
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT (25 * CONFIG_SYS_HZ)
-#endif
-
-#define CONFIG_SYS_MONITOR_BASE 0x0
-#define CONFIG_SYS_MONITOR_LEN 0x40000
-
-/* Skip factory configuration block */
-
-/*
- * GPIO settings
- */
-#define CONFIG_SYS_GPSR0_VAL 0x00000000
-#define CONFIG_SYS_GPSR1_VAL 0x00020000
-#define CONFIG_SYS_GPSR2_VAL 0x0002c000
-#define CONFIG_SYS_GPSR3_VAL 0x00000000
-
-#define CONFIG_SYS_GPCR0_VAL 0x00000000
-#define CONFIG_SYS_GPCR1_VAL 0x00000000
-#define CONFIG_SYS_GPCR2_VAL 0x00000000
-#define CONFIG_SYS_GPCR3_VAL 0x00000000
-
-#define CONFIG_SYS_GPDR0_VAL 0xc8008000
-#define CONFIG_SYS_GPDR1_VAL 0xfc02a981
-#define CONFIG_SYS_GPDR2_VAL 0x92c3ffff
-#define CONFIG_SYS_GPDR3_VAL 0x0061e804
-
-#define CONFIG_SYS_GAFR0_L_VAL 0x80100000
-#define CONFIG_SYS_GAFR0_U_VAL 0xa5c00010
-#define CONFIG_SYS_GAFR1_L_VAL 0x6992901a
-#define CONFIG_SYS_GAFR1_U_VAL 0xaaa50008
-#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa
-#define CONFIG_SYS_GAFR2_U_VAL 0x4109a002
-#define CONFIG_SYS_GAFR3_L_VAL 0x54000310
-#define CONFIG_SYS_GAFR3_U_VAL 0x00005401
-
-#define CONFIG_SYS_PSSR_VAL 0x30
-
-/*
- * Clock settings
- */
-#define CONFIG_SYS_CKEN 0x00500240
-#define CONFIG_SYS_CCCR 0x02000290
-
-/*
- * Memory settings
- */
-#define CONFIG_SYS_MSC0_VAL 0x9ee1c5f2
-#define CONFIG_SYS_MSC1_VAL 0x9ee1f994
-#define CONFIG_SYS_MSC2_VAL 0x9ee19ee1
-#define CONFIG_SYS_MDCNFG_VAL 0x090009c9
-#define CONFIG_SYS_MDREFR_VAL 0x2003a031
-#define CONFIG_SYS_MDMRS_VAL 0x00220022
-#define CONFIG_SYS_FLYCNFG_VAL 0x00010001
-#define CONFIG_SYS_SXCNFG_VAL 0x40044004
-
-/*
- * PCMCIA and CF Interfaces
- */
-#define CONFIG_SYS_MECR_VAL 0x00000000
-#define CONFIG_SYS_MCMEM0_VAL 0x00028307
-#define CONFIG_SYS_MCMEM1_VAL 0x00014307
-#define CONFIG_SYS_MCATT0_VAL 0x00038787
-#define CONFIG_SYS_MCATT1_VAL 0x0001c787
-#define CONFIG_SYS_MCIO0_VAL 0x0002830f
-#define CONFIG_SYS_MCIO1_VAL 0x0001430f
-
-#include "pxa-common.h"
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/pxa-common.h b/include/configs/pxa-common.h
deleted file mode 100644
index 7a78f98eb15..00000000000
--- a/include/configs/pxa-common.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Toradex Colibri PXA270 configuration file
- *
- * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
- */
-
-#ifndef __CONFIG_PXA_COMMON_H__
-#define __CONFIG_PXA_COMMON_H__
-
-/*
- * OHCI USB
- */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_SYS_USB_OHCI_BOARD_INIT
-#ifdef CONFIG_CPU_PXA27X
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3
-#else
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#endif
-#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x4c000000
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME "pxa-ohci"
-#endif
-
-#endif /* __CONFIG_PXA_COMMON_H__ */
--
2.34.1
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v1 18/24] disk: part: add the device search failed log msg
2022-04-08 8:06 [PATCH v1 00/24] toradex updates: assortment of fixes and improvements Marcel Ziswiler
` (16 preceding siblings ...)
2022-04-08 8:07 ` [PATCH v1 17/24] board: toradex: drop colibri pxa270 support Marcel Ziswiler
@ 2022-04-08 8:07 ` Marcel Ziswiler
2022-04-12 18:44 ` sbabic
2022-04-08 8:07 ` [PATCH v1 19/24] colibri-imx6ull: fix nand bch geometry Marcel Ziswiler
` (6 subsequent siblings)
24 siblings, 1 reply; 42+ messages in thread
From: Marcel Ziswiler @ 2022-04-08 8:07 UTC (permalink / raw)
To: u-boot
Cc: Oleksii Bidnichenko, Marcel Ziswiler, AKASHI Takahiro,
Heinrich Schuchardt, Sean Anderson, Simon Glass, schspa
From: Oleksii Bidnichenko <oleksii.bidnichenko@toradex.com>
Add missing error message to blk_get_device_part_str.
Signed-off-by: Oleksii Bidnichenko <oleksii.bidnichenko@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
disk/part.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/disk/part.c b/disk/part.c
index 49e39a24e86..16e8c94eebc 100644
--- a/disk/part.c
+++ b/disk/part.c
@@ -527,6 +527,8 @@ int blk_get_device_part_str(const char *ifname, const char *dev_part_str,
/* Look up the device */
dev = blk_get_device_by_str(ifname, dev_str, dev_desc);
if (dev < 0) {
+ printf("** Bad device specification %s %s **\n",
+ ifname, dev_str);
ret = dev;
goto cleanup;
}
--
2.34.1
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v1 19/24] colibri-imx6ull: fix nand bch geometry
2022-04-08 8:06 [PATCH v1 00/24] toradex updates: assortment of fixes and improvements Marcel Ziswiler
` (17 preceding siblings ...)
2022-04-08 8:07 ` [PATCH v1 18/24] disk: part: add the device search failed log msg Marcel Ziswiler
@ 2022-04-08 8:07 ` Marcel Ziswiler
2022-04-08 8:24 ` Marcel Ziswiler
2022-04-08 10:27 ` Marcel Ziswiler
` (5 subsequent siblings)
24 siblings, 1 reply; 42+ messages in thread
From: Marcel Ziswiler @ 2022-04-08 8:07 UTC (permalink / raw)
To: u-boot
Cc: Marcel Ziswiler, Fabio Estevam, Han Xu, Miquel Raynal,
NXP i.MX U-Boot Team, Stefano Babic
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Fix NAND BCH geometry as otherwise the following errors are observed
upon boot:
...
Loading Environment from NAND... NAND read from offset 380000 failed -74
...
NAND read from offset 800 failed -74
...
ubi0 error: ubi_io_read: error -74 (ECC error) while reading 64 bytes
from PEB 0:0, read 64 bytes
...
Fixes: ed48490f8d3f
("mtd: gpmi: fix the bch setting backward compatible issue")
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/dts/imx6ull-colibri.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/dts/imx6ull-colibri.dts b/arch/arm/dts/imx6ull-colibri.dts
index dbe3e0206e5..d59696ee6e7 100644
--- a/arch/arm/dts/imx6ull-colibri.dts
+++ b/arch/arm/dts/imx6ull-colibri.dts
@@ -15,6 +15,7 @@
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand>;
+ fsl,use-minimum-ecc;
nand-on-flash-bbt;
nand-ecc-mode = "hw";
nand-ecc-strength = <8>;
--
2.34.1
^ permalink raw reply related [flat|nested] 42+ messages in thread
* Re: [PATCH v1 19/24] colibri-imx6ull: fix nand bch geometry
2022-04-08 8:07 ` [PATCH v1 19/24] colibri-imx6ull: fix nand bch geometry Marcel Ziswiler
@ 2022-04-08 8:24 ` Marcel Ziswiler
2022-04-13 7:32 ` Stefano Babic
0 siblings, 1 reply; 42+ messages in thread
From: Marcel Ziswiler @ 2022-04-08 8:24 UTC (permalink / raw)
To: u-boot; +Cc: festevam, han.xu, uboot-imx, sbabic, miquel.raynal
> Subject: [PATCH v1 19/24] colibri-imx6ull: fix nand bch geometry
> Date: Fri, 8 Apr 2022 10:07:14 +0200
> Message-Id: <20220408080719.342072-20-marcel@ziswiler.com>
> X-Mailer: git-send-email 2.34.1
> In-Reply-To: <20220408080719.342072-1-marcel@ziswiler.com>
> References: <20220408080719.342072-1-marcel@ziswiler.com>
> MIME-Version: 1.0
> Content-Transfer-Encoding: 8bit
>
> Result: 250
> (mbox) Adding cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> from line 'From: Marcel Ziswiler
<marcel.ziswiler@toradex.com>'
> (body) Adding cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> from line 'Signed-off-by: Marcel Ziswiler
<marcel.ziswiler@toradex.com>'
> (cc-cmd) Adding cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> from: 'tools/patman/patman send --cc-cmd
/tmp/patman.341838'
> (cc-cmd) Adding cc: u-boot@lists.denx.de from: 'tools/patman/patman send --cc-cmd /tmp/patman.341838'
> Requested action aborted
> Mails per session limit exceeded.
Hehe, looks like I hit some arbitrary email limit somewhere. Let me figure out how I may send the last 5
patches...
^ permalink raw reply [flat|nested] 42+ messages in thread
* [PATCH v1 19/24] colibri-imx6ull: fix nand bch geometry
2022-04-08 8:06 [PATCH v1 00/24] toradex updates: assortment of fixes and improvements Marcel Ziswiler
` (18 preceding siblings ...)
2022-04-08 8:07 ` [PATCH v1 19/24] colibri-imx6ull: fix nand bch geometry Marcel Ziswiler
@ 2022-04-08 10:27 ` Marcel Ziswiler
2022-04-12 18:42 ` sbabic
2022-04-08 10:27 ` [PATCH v1 20/24] board: colibri_imx7: fix usb start on solo Marcel Ziswiler
` (4 subsequent siblings)
24 siblings, 1 reply; 42+ messages in thread
From: Marcel Ziswiler @ 2022-04-08 10:27 UTC (permalink / raw)
To: u-boot
Cc: Fabio Estevam, Han Xu, Miquel Raynal, NXP i . MX U-Boot Team,
Stefano Babic, Marcel Ziswiler
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Fix NAND BCH geometry as otherwise the following errors are observed
upon boot:
...
Loading Environment from NAND... NAND read from offset 380000 failed -74
...
NAND read from offset 800 failed -74
...
ubi0 error: ubi_io_read: error -74 (ECC error) while reading 64 bytes
from PEB 0:0, read 64 bytes
...
Fixes: ed48490f8d3f
("mtd: gpmi: fix the bch setting backward compatible issue")
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/dts/imx6ull-colibri.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/dts/imx6ull-colibri.dts b/arch/arm/dts/imx6ull-colibri.dts
index dbe3e0206e5..d59696ee6e7 100644
--- a/arch/arm/dts/imx6ull-colibri.dts
+++ b/arch/arm/dts/imx6ull-colibri.dts
@@ -15,6 +15,7 @@
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand>;
+ fsl,use-minimum-ecc;
nand-on-flash-bbt;
nand-ecc-mode = "hw";
nand-ecc-strength = <8>;
--
2.34.1
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v1 20/24] board: colibri_imx7: fix usb start on solo
2022-04-08 8:06 [PATCH v1 00/24] toradex updates: assortment of fixes and improvements Marcel Ziswiler
` (19 preceding siblings ...)
2022-04-08 10:27 ` Marcel Ziswiler
@ 2022-04-08 10:27 ` Marcel Ziswiler
2022-04-08 10:28 ` [PATCH v1 21/24] configs: tdx: apalis_imx6: drop hw v1.0 support Marcel Ziswiler
` (3 subsequent siblings)
24 siblings, 0 replies; 42+ messages in thread
From: Marcel Ziswiler @ 2022-04-08 10:27 UTC (permalink / raw)
To: u-boot; +Cc: Marcel Ziswiler
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
This fixes the following crash when run on a Colibri iMX7S aka solo:
Colibri iMX7 # usb start
starting USB...
Bus usb@30b10000: USB EHCI 1.00
Bus usb@30b20000:
The i.MX 7Solo has only one single USB OTG1 but no USB host port. Trying
to initialize the nonexisting port just crashes.
While at it also drop board_usb_phy_mode() which is also no longer used
in the driver model age.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
board/toradex/colibri_imx7/colibri_imx7.c | 40 +++++------------------
configs/colibri_imx7_defconfig | 1 +
2 files changed, 9 insertions(+), 32 deletions(-)
diff --git a/board/toradex/colibri_imx7/colibri_imx7.c b/board/toradex/colibri_imx7/colibri_imx7.c
index 6822102d2c3..486299b5e93 100644
--- a/board/toradex/colibri_imx7/colibri_imx7.c
+++ b/board/toradex/colibri_imx7/colibri_imx7.c
@@ -319,40 +319,16 @@ int ft_board_setup(void *blob, struct bd_info *bd)
#endif
#ifdef CONFIG_USB_EHCI_MX7
-static iomux_v3_cfg_t const usb_otg2_pads[] = {
- MX7D_PAD_UART3_CTS_B__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-int board_ehci_hcd_init(int port)
+int board_fix_fdt(void *rw_fdt_blob)
{
- switch (port) {
- case 0:
- break;
- case 1:
- if (is_cpu_type(MXC_CPU_MX7S))
- return -ENODEV;
-
- imx_iomux_v3_setup_multiple_pads(usb_otg2_pads,
- ARRAY_SIZE(usb_otg2_pads));
- break;
- default:
- return -EINVAL;
- }
- return 0;
-}
+ /* i.MX 7Solo has only one single USB OTG1 but no USB host port */
+ if (is_cpu_type(MXC_CPU_MX7S)) {
+ int offset = fdt_path_offset(rw_fdt_blob, "/soc/bus@30800000/usb@30b20000");
-int board_usb_phy_mode(int port)
-{
- switch (port) {
- case 0:
- if (gpio_get_value(USB_CDET_GPIO))
- return USB_INIT_DEVICE;
- else
- return USB_INIT_HOST;
- case 1:
- default:
- return USB_INIT_HOST;
+ return fdt_status_disabled(rw_fdt_blob, offset);
}
+
+ return 0;
}
#if defined(CONFIG_BOARD_LATE_INIT)
@@ -373,4 +349,4 @@ int board_late_init(void)
}
#endif /* CONFIG_BOARD_LATE_INIT */
-#endif
+#endif /* CONFIG_USB_EHCI_MX7 */
diff --git a/configs/colibri_imx7_defconfig b/configs/colibri_imx7_defconfig
index c00d1938eec..202fd05394d 100644
--- a/configs/colibri_imx7_defconfig
+++ b/configs/colibri_imx7_defconfig
@@ -12,6 +12,7 @@ CONFIG_TARGET_COLIBRI_IMX7=y
CONFIG_IMX_RDC=y
CONFIG_IMX_BOOTAUX=y
CONFIG_IMX_HAB=y
+CONFIG_OF_BOARD_FIXUP=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
--
2.34.1
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v1 21/24] configs: tdx: apalis_imx6: drop hw v1.0 support
2022-04-08 8:06 [PATCH v1 00/24] toradex updates: assortment of fixes and improvements Marcel Ziswiler
` (20 preceding siblings ...)
2022-04-08 10:27 ` [PATCH v1 20/24] board: colibri_imx7: fix usb start on solo Marcel Ziswiler
@ 2022-04-08 10:28 ` Marcel Ziswiler
2022-04-08 10:28 ` [PATCH v1 22/24] configs: tdx: apalis/colibri_imx6: use preboot as well Marcel Ziswiler
` (2 subsequent siblings)
24 siblings, 0 replies; 42+ messages in thread
From: Marcel Ziswiler @ 2022-04-08 10:28 UTC (permalink / raw)
To: u-boot; +Cc: Marcel Ziswiler
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Drop optional support for the ancient Apalis iMX6 V1.0 hardware which
had the UART wired as DCE rather than DTE.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
board/toradex/apalis_imx6/apalis_imx6.c | 25 ++-----------------------
include/configs/apalis_imx6.h | 6 +-----
2 files changed, 3 insertions(+), 28 deletions(-)
diff --git a/board/toradex/apalis_imx6/apalis_imx6.c b/board/toradex/apalis_imx6/apalis_imx6.c
index a78d52d3fac..f33d6a98f53 100644
--- a/board/toradex/apalis_imx6/apalis_imx6.c
+++ b/board/toradex/apalis_imx6/apalis_imx6.c
@@ -665,11 +665,8 @@ int board_early_init_f(void)
{
imx_iomux_v3_setup_multiple_pads(pwr_intb_pads,
ARRAY_SIZE(pwr_intb_pads));
-#ifndef CONFIG_TDX_APALIS_IMX6_V1_0
setup_iomux_dte_uart();
-#else
- setup_iomux_dce_uart();
-#endif
+
return 0;
}
@@ -714,23 +711,7 @@ int board_late_init(void)
rev = get_board_revision();
snprintf(env_str, ARRAY_SIZE(env_str), "%.4x", rev);
env_set("board_rev", env_str);
-
-#ifndef CONFIG_TDX_APALIS_IMX6_V1_0
- if ((rev & 0xfff0) == 0x0100) {
- char *fdt_env;
-
- /* reconfigure the UART to DCE mode dynamically if on V1.0 HW */
- setup_iomux_dce_uart();
-
- /* if using the default device tree, use version for V1.0 HW */
- fdt_env = env_get("fdt_file");
- if ((fdt_env != NULL) && (strcmp(FDT_FILE, fdt_env) == 0)) {
- env_set("fdt_file", FDT_FILE_V1_0);
- printf("patching fdt_file to " FDT_FILE_V1_0 "\n");
- }
- }
-#endif /* CONFIG_TDX_APALIS_IMX6_V1_0 */
-#endif /* CONFIG_REVISION_TAG */
+#endif /* CONFIG_BOARD_LATE_INIT */
#ifdef CONFIG_CMD_USB_SDP
if (is_boot_from_usb()) {
@@ -1129,10 +1110,8 @@ void board_init_f(ulong dummy)
/* UART clocks enabled and gd valid - init serial console */
preloader_console_init();
-#ifndef CONFIG_TDX_APALIS_IMX6_V1_0
/* Make sure we use dte mode */
setup_dtemode_uart();
-#endif
/* DDR initialization */
spl_dram_init();
diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
index 9a611b163ab..373843c0db4 100644
--- a/include/configs/apalis_imx6.h
+++ b/include/configs/apalis_imx6.h
@@ -90,12 +90,8 @@
"ramdisk_addr_r=0x12200000\0" \
"scriptaddr=0x17000000\0"
-#ifndef CONFIG_TDX_APALIS_IMX6_V1_0
#define FDT_FILE "imx6q-apalis-eval.dtb"
-#define FDT_FILE_V1_0 "imx6q-apalis_v1_0-eval.dtb"
-#else
-#define FDT_FILE "imx6q-apalis_v1_0-eval.dtb"
-#endif
+
#define CONFIG_EXTRA_ENV_SETTINGS \
BOOTENV \
"boot_file=zImage\0" \
--
2.34.1
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v1 22/24] configs: tdx: apalis/colibri_imx6: use preboot as well
2022-04-08 8:06 [PATCH v1 00/24] toradex updates: assortment of fixes and improvements Marcel Ziswiler
` (21 preceding siblings ...)
2022-04-08 10:28 ` [PATCH v1 21/24] configs: tdx: apalis_imx6: drop hw v1.0 support Marcel Ziswiler
@ 2022-04-08 10:28 ` Marcel Ziswiler
2022-04-08 10:28 ` [PATCH v1 23/24] configs: colibri-imx6ull/-emmc: use micrel ksz8xxx phy driver Marcel Ziswiler
2022-04-08 10:28 ` [PATCH v1 24/24] board: colibri-imx6ull: fix detecting sd card Marcel Ziswiler
24 siblings, 0 replies; 42+ messages in thread
From: Marcel Ziswiler @ 2022-04-08 10:28 UTC (permalink / raw)
To: u-boot; +Cc: Marcel Ziswiler
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Use PREBOOT as well. This allows a customer to just set fdt_board as
on any other module to customize the device tree for his carrier
board.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
configs/apalis_imx6_defconfig | 2 ++
configs/colibri_imx6_defconfig | 2 ++
include/configs/apalis_imx6.h | 5 +----
include/configs/colibri_imx6.h | 4 +---
4 files changed, 6 insertions(+), 7 deletions(-)
diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig
index 86216b6e034..28624b53e0c 100644
--- a/configs/apalis_imx6_defconfig
+++ b/configs/apalis_imx6_defconfig
@@ -29,6 +29,8 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_BOOTDELAY=1
CONFIG_BOOTCOMMAND="run distro_bootcmd; usb start; setenv stdout serial,vidconsole; setenv stdin serial,usbkbd"
+CONFIG_USE_PREBOOT=y
+CONFIG_PREBOOT="test -n ${fdtfile} || setenv fdtfile imx6q-apalis-${fdt_board}.dtb"
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig
index fed1ece5709..6ebb6845725 100644
--- a/configs/colibri_imx6_defconfig
+++ b/configs/colibri_imx6_defconfig
@@ -28,6 +28,8 @@ CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_BOOTDELAY=1
CONFIG_BOOTCOMMAND="run distro_bootcmd; usb start; setenv stdout serial,vidconsole; setenv stdin serial,usbkbd"
+CONFIG_USE_PREBOOT=y
+CONFIG_PREBOOT="test -n ${fdtfile} || setenv fdtfile imx6dl-colibri-${fdt_board}.dtb"
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h
index 373843c0db4..b2a818629d1 100644
--- a/include/configs/apalis_imx6.h
+++ b/include/configs/apalis_imx6.h
@@ -90,16 +90,13 @@
"ramdisk_addr_r=0x12200000\0" \
"scriptaddr=0x17000000\0"
-#define FDT_FILE "imx6q-apalis-eval.dtb"
-
#define CONFIG_EXTRA_ENV_SETTINGS \
BOOTENV \
"boot_file=zImage\0" \
"boot_script_dhcp=boot.scr\0" \
"console=ttymxc0\0" \
"defargs=enable_wait_mode=off vmalloc=400M\0" \
- "fdt_file=" FDT_FILE "\0" \
- "fdtfile=" FDT_FILE "\0" \
+ "fdt_board=eval\0" \
"fdt_fixup=;\0" \
MEM_LAYOUT_ENV_SETTINGS \
UBOOT_UPDATE \
diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h
index ff3f3636ede..9a53dc51841 100644
--- a/include/configs/colibri_imx6.h
+++ b/include/configs/colibri_imx6.h
@@ -79,15 +79,13 @@
"ramdisk_addr_r=0x12200000\0" \
"scriptaddr=0x17000000\0"
-#define FDT_FILE "imx6dl-colibri-eval-v3.dtb"
#define CONFIG_EXTRA_ENV_SETTINGS \
BOOTENV \
"boot_file=zImage\0" \
"boot_script_dhcp=boot.scr\0" \
"console=ttymxc0\0" \
"defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \
- "fdt_file=" FDT_FILE "\0" \
- "fdtfile=" FDT_FILE "\0" \
+ "fdt_board=eval-v3\0" \
"fdt_fixup=;\0" \
MEM_LAYOUT_ENV_SETTINGS \
UBOOT_UPDATE \
--
2.34.1
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v1 23/24] configs: colibri-imx6ull/-emmc: use micrel ksz8xxx phy driver
2022-04-08 8:06 [PATCH v1 00/24] toradex updates: assortment of fixes and improvements Marcel Ziswiler
` (22 preceding siblings ...)
2022-04-08 10:28 ` [PATCH v1 22/24] configs: tdx: apalis/colibri_imx6: use preboot as well Marcel Ziswiler
@ 2022-04-08 10:28 ` Marcel Ziswiler
2022-04-12 18:47 ` sbabic
2022-04-08 10:28 ` [PATCH v1 24/24] board: colibri-imx6ull: fix detecting sd card Marcel Ziswiler
24 siblings, 1 reply; 42+ messages in thread
From: Marcel Ziswiler @ 2022-04-08 10:28 UTC (permalink / raw)
To: u-boot; +Cc: Marcel Ziswiler
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Use the Micrel KSZ8xxx specific Ethernet PHY driver rather than the
generic one.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
configs/colibri-imx6ull-emmc_defconfig | 1 +
configs/colibri-imx6ull_defconfig | 1 +
2 files changed, 2 insertions(+)
diff --git a/configs/colibri-imx6ull-emmc_defconfig b/configs/colibri-imx6ull-emmc_defconfig
index cd88320b605..7597b055cc6 100644
--- a/configs/colibri-imx6ull-emmc_defconfig
+++ b/configs/colibri-imx6ull-emmc_defconfig
@@ -61,6 +61,7 @@ CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_USDHC=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_DM_ETH=y
CONFIG_FEC_MXC=y
CONFIG_MII=y
diff --git a/configs/colibri-imx6ull_defconfig b/configs/colibri-imx6ull_defconfig
index d06cc2f7d82..2943b22a96e 100644
--- a/configs/colibri-imx6ull_defconfig
+++ b/configs/colibri-imx6ull_defconfig
@@ -77,6 +77,7 @@ CONFIG_SYS_NAND_ONFI_DETECTION=y
CONFIG_MTD_UBI_FASTMAP=y
CONFIG_PHYLIB=y
CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ8XXX=y
CONFIG_DM_ETH=y
CONFIG_FEC_MXC=y
CONFIG_MII=y
--
2.34.1
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v1 24/24] board: colibri-imx6ull: fix detecting sd card
2022-04-08 8:06 [PATCH v1 00/24] toradex updates: assortment of fixes and improvements Marcel Ziswiler
` (23 preceding siblings ...)
2022-04-08 10:28 ` [PATCH v1 23/24] configs: colibri-imx6ull/-emmc: use micrel ksz8xxx phy driver Marcel Ziswiler
@ 2022-04-08 10:28 ` Marcel Ziswiler
2022-04-12 18:45 ` sbabic
24 siblings, 1 reply; 42+ messages in thread
From: Marcel Ziswiler @ 2022-04-08 10:28 UTC (permalink / raw)
To: u-boot
Cc: Fabio Estevam, NXP i . MX U-Boot Team, Stefano Babic, Marcel Ziswiler
From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Turns out on certain carrier boards (e.g. Iris V2) and under certain
circumstances (e.g. after a software reset) the SD card may have been
left in a strange state which later failed as follows:
Colibri iMX6ULL # mmc dev 0
Card did not respond to voltage select! : -110
Fix this as follows:
- Re-name the signaling voltage rail regulator from vmmc to vqmmc.
- Fix the name of the GPIO property to gpios.
- Specify 4-bit bus width, no write-protect capability and no 1.8
volt signaling voltage capability.
- Fix the clock vs. command pull-up vs. push-pull configuration.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---
arch/arm/dts/imx6ull-colibri.dtsi | 21 ++++++++++++---------
1 file changed, 12 insertions(+), 9 deletions(-)
diff --git a/arch/arm/dts/imx6ull-colibri.dtsi b/arch/arm/dts/imx6ull-colibri.dtsi
index cbf037be7eb..485fec44ccc 100644
--- a/arch/arm/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/dts/imx6ull-colibri.dtsi
@@ -35,9 +35,9 @@
regulator-max-microvolt = <5000000>;
};
- reg_sd1_vmmc: regulator-sd1-vmmc {
+ reg_sd1_vqmmc: regulator-sd1-vqmmc {
compatible = "regulator-gpio";
- gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_snvs_reg_sd>;
regulator-always-on;
@@ -227,12 +227,15 @@
assigned-clocks = <&clks IMX6UL_CLK_USDHC1_SEL>, <&clks IMX6UL_CLK_USDHC1>;
assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
assigned-clock-rates = <0>, <198000000>;
+ bus-width = <4>;
cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; /* MMC_CD */
+ disable-wp;
+ no-1-8-v;
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>;
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
- vmmc-supply = <®_sd1_vmmc>;
+ vqmmc-supply = <®_sd1_vqmmc>;
status = "okay";
};
@@ -467,8 +470,8 @@
pinctrl_usdhc1: usdhc1-grp {
fsl,pins = <
- MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x17059
- MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x10059
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
@@ -478,8 +481,8 @@
pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
fsl,pins = <
- MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x170b9
- MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x100b9
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
@@ -489,8 +492,8 @@
pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
fsl,pins = <
- MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x170f9
- MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x100f9
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
--
2.34.1
^ permalink raw reply related [flat|nested] 42+ messages in thread
* [PATCH v1 02/24] configs: verdin-imx8mm: verdin-imx8mp: enable dm serial
2022-04-08 8:06 ` [PATCH v1 02/24] configs: verdin-imx8mm: verdin-imx8mp: enable dm serial Marcel Ziswiler
@ 2022-04-12 18:41 ` sbabic
0 siblings, 0 replies; 42+ messages in thread
From: sbabic @ 2022-04-12 18:41 UTC (permalink / raw)
To: Marcel Ziswiler, u-boot
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Enable driver model for serial.
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 42+ messages in thread
* [PATCH v1 19/24] colibri-imx6ull: fix nand bch geometry
2022-04-08 10:27 ` Marcel Ziswiler
@ 2022-04-12 18:42 ` sbabic
0 siblings, 0 replies; 42+ messages in thread
From: sbabic @ 2022-04-12 18:42 UTC (permalink / raw)
To: Marcel Ziswiler, u-boot
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Fix NAND BCH geometry as otherwise the following errors are observed
> upon boot:
> ...
> Loading Environment from NAND... NAND read from offset 380000 failed -74
> ...
> NAND read from offset 800 failed -74
> ...
> ubi0 error: ubi_io_read: error -74 (ECC error) while reading 64 bytes
> from PEB 0:0, read 64 bytes
> ...
> Fixes: ed48490f8d3f
> ("mtd: gpmi: fix the bch setting backward compatible issue")
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 42+ messages in thread
* [PATCH v1 12/24] apalis-tk1: avoid save environment unasked
2022-04-08 8:07 ` [PATCH v1 12/24] apalis-tk1: " Marcel Ziswiler
@ 2022-04-12 18:42 ` sbabic
0 siblings, 0 replies; 42+ messages in thread
From: sbabic @ 2022-04-12 18:42 UTC (permalink / raw)
To: Marcel Ziswiler, u-boot
> From: Denys Drozdov <denys.drozdov@toradex.com>
> U-Boot should never save the environment unasked.
> This also avoids storing broken fdt_module to flash.
> Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 42+ messages in thread
* [PATCH v1 07/24] include: colibri_vf: add missing tdxargs variable
2022-04-08 8:07 ` [PATCH v1 07/24] include: colibri_vf: add missing tdxargs variable Marcel Ziswiler
@ 2022-04-12 18:43 ` sbabic
0 siblings, 0 replies; 42+ messages in thread
From: sbabic @ 2022-04-12 18:43 UTC (permalink / raw)
To: Marcel Ziswiler, u-boot
> From: Philippe Schenker <philippe.schenker@toradex.com>
> All the other NAND-based boards have tdxargs specified for setting
> manual kernel command-line arguments.
> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 42+ messages in thread
* [PATCH v1 01/24] arm64: dts: imx8mm-u-boot.dtsi: imx8mp-u-boot.dtsi: use atf-bl31 type
2022-04-08 8:06 ` [PATCH v1 01/24] arm64: dts: imx8mm-u-boot.dtsi: imx8mp-u-boot.dtsi: use atf-bl31 type Marcel Ziswiler
@ 2022-04-12 18:44 ` sbabic
0 siblings, 0 replies; 42+ messages in thread
From: sbabic @ 2022-04-12 18:44 UTC (permalink / raw)
To: Marcel Ziswiler, u-boot
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Explicitly use the atf-bl31 type for the bl31.bin atf-blob. This uses
> the path from the BL31 environment variable, if defined.
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 42+ messages in thread
* [PATCH v1 18/24] disk: part: add the device search failed log msg
2022-04-08 8:07 ` [PATCH v1 18/24] disk: part: add the device search failed log msg Marcel Ziswiler
@ 2022-04-12 18:44 ` sbabic
0 siblings, 0 replies; 42+ messages in thread
From: sbabic @ 2022-04-12 18:44 UTC (permalink / raw)
To: Marcel Ziswiler, u-boot
> From: Oleksii Bidnichenko <oleksii.bidnichenko@toradex.com>
> Add missing error message to blk_get_device_part_str.
> Signed-off-by: Oleksii Bidnichenko <oleksii.bidnichenko@toradex.com>
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 42+ messages in thread
* [PATCH v1 24/24] board: colibri-imx6ull: fix detecting sd card
2022-04-08 10:28 ` [PATCH v1 24/24] board: colibri-imx6ull: fix detecting sd card Marcel Ziswiler
@ 2022-04-12 18:45 ` sbabic
0 siblings, 0 replies; 42+ messages in thread
From: sbabic @ 2022-04-12 18:45 UTC (permalink / raw)
To: Marcel Ziswiler, u-boot
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Turns out on certain carrier boards (e.g. Iris V2) and under certain
> circumstances (e.g. after a software reset) the SD card may have been
> left in a strange state which later failed as follows:
> Colibri iMX6ULL # mmc dev 0
> Card did not respond to voltage select! : -110
> Fix this as follows:
> - Re-name the signaling voltage rail regulator from vmmc to vqmmc.
> - Fix the name of the GPIO property to gpios.
> - Specify 4-bit bus width, no write-protect capability and no 1.8
> volt signaling voltage capability.
> - Fix the clock vs. command pull-up vs. push-pull configuration.
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 42+ messages in thread
* [PATCH v1 15/24] regulator: fixed: add possibility to enable by clock
2022-04-08 8:07 ` [PATCH v1 15/24] regulator: fixed: add possibility to enable by clock Marcel Ziswiler
@ 2022-04-12 18:45 ` sbabic
0 siblings, 0 replies; 42+ messages in thread
From: sbabic @ 2022-04-12 18:45 UTC (permalink / raw)
To: Marcel Ziswiler, u-boot
> From: Philippe Schenker <philippe.schenker@toradex.com>
> This commit adds the possibility to choose the compatible
> "regulator-fixed-clock" in devicetree.
> This is a special case of regulator-fixed where a clock has to
> be used to switch the regulator on and off.
> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 42+ messages in thread
* [PATCH v1 16/24] board: colibri-imx6ull: fix detecting ethernet phy
2022-04-08 8:07 ` [PATCH v1 16/24] board: colibri-imx6ull: fix detecting ethernet phy Marcel Ziswiler
@ 2022-04-12 18:46 ` sbabic
0 siblings, 0 replies; 42+ messages in thread
From: sbabic @ 2022-04-12 18:46 UTC (permalink / raw)
To: Marcel Ziswiler, u-boot
> From: Philippe Schenker <philippe.schenker@toradex.com>
> Now that it is possible to use regulator-fixed-clock make use
> of it. This makes U-Boot detect the PHY on first cold-boot.
> This commit also adjusts the code in setup_fec and follows
> how it is done in mx6ullevk.c
> This commit also slows down the boot-process by about 150ms
> as it now waits for the regulator-fixed-clock voltage that
> drives the PHY to go up.
> If you rely on very fast boot-speeds and don't need ethernet
> for your boot-process you can safely revert the changes on
> imx6ull-colibri.dtsi
> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 42+ messages in thread
* [PATCH v1 23/24] configs: colibri-imx6ull/-emmc: use micrel ksz8xxx phy driver
2022-04-08 10:28 ` [PATCH v1 23/24] configs: colibri-imx6ull/-emmc: use micrel ksz8xxx phy driver Marcel Ziswiler
@ 2022-04-12 18:47 ` sbabic
0 siblings, 0 replies; 42+ messages in thread
From: sbabic @ 2022-04-12 18:47 UTC (permalink / raw)
To: Marcel Ziswiler, u-boot
> From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
> Use the Micrel KSZ8xxx specific Ethernet PHY driver rather than the
> generic one.
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 42+ messages in thread
* [PATCH v1 08/24] colibri-imx6ull: drop vidargs and remove video= settings
2022-04-08 8:07 ` [PATCH v1 08/24] colibri-imx6ull: drop vidargs and remove video= settings Marcel Ziswiler
@ 2022-04-12 18:47 ` sbabic
0 siblings, 0 replies; 42+ messages in thread
From: sbabic @ 2022-04-12 18:47 UTC (permalink / raw)
To: Marcel Ziswiler, u-boot
> From: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
> Since we envision using overlays for display interfaces, the video=
> settings within vidargs are obsolete. Remove these settings from the
> U-Boot.
> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 42+ messages in thread
* [PATCH v1 13/24] board: colibri-imx6ull: Do not leave variant variable unset
2022-04-08 8:07 ` [PATCH v1 13/24] board: colibri-imx6ull: Do not leave variant variable unset Marcel Ziswiler
@ 2022-04-12 18:47 ` sbabic
0 siblings, 0 replies; 42+ messages in thread
From: sbabic @ 2022-04-12 18:47 UTC (permalink / raw)
To: Marcel Ziswiler, u-boot
> From: Philippe Schenker <philippe.schenker@toradex.com>
> Toradex uses the variable variant to distinguish between modules with
> eMMC, NAND with wifi and NAND without wifi.
> This variable is set on every boot. Set this variable also if we have a
> NAND module without wifi to prevent issues.
> Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 42+ messages in thread
* [PATCH v1 11/24] apalis-imx6: avoid save environment unasked
2022-04-08 8:07 ` [PATCH v1 11/24] apalis-imx6: avoid save environment unasked Marcel Ziswiler
@ 2022-04-12 18:48 ` sbabic
0 siblings, 0 replies; 42+ messages in thread
From: sbabic @ 2022-04-12 18:48 UTC (permalink / raw)
To: Marcel Ziswiler, u-boot
> From: Denys Drozdov <denys.drozdov@toradex.com>
> U-Boot should never save the environment unasked.
> This also avoids storing broken ftd_file to eMMC.
> Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v1 19/24] colibri-imx6ull: fix nand bch geometry
2022-04-08 8:24 ` Marcel Ziswiler
@ 2022-04-13 7:32 ` Stefano Babic
2022-04-13 8:06 ` Marcel Ziswiler
0 siblings, 1 reply; 42+ messages in thread
From: Stefano Babic @ 2022-04-13 7:32 UTC (permalink / raw)
To: Marcel Ziswiler, u-boot
Cc: festevam, han.xu, uboot-imx, sbabic, miquel.raynal
Hi Marcel,
On 08.04.22 10:24, Marcel Ziswiler wrote:
>> Subject: [PATCH v1 19/24] colibri-imx6ull: fix nand bch geometry
>> Date: Fri, 8 Apr 2022 10:07:14 +0200
>> Message-Id: <20220408080719.342072-20-marcel@ziswiler.com>
>> X-Mailer: git-send-email 2.34.1
>> In-Reply-To: <20220408080719.342072-1-marcel@ziswiler.com>
>> References: <20220408080719.342072-1-marcel@ziswiler.com>
>> MIME-Version: 1.0
>> Content-Transfer-Encoding: 8bit
>>
>> Result: 250
>> (mbox) Adding cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> from line 'From: Marcel Ziswiler
> <marcel.ziswiler@toradex.com>'
>> (body) Adding cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> from line 'Signed-off-by: Marcel Ziswiler
> <marcel.ziswiler@toradex.com>'
>> (cc-cmd) Adding cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> from: 'tools/patman/patman send --cc-cmd
> /tmp/patman.341838'
>> (cc-cmd) Adding cc: u-boot@lists.denx.de from: 'tools/patman/patman send --cc-cmd /tmp/patman.341838'
>> Requested action aborted
>> Mails per session limit exceeded.
>
> Hehe, looks like I hit some arbitrary email limit somewhere. Let me figure out how I may send the last 5
> patches...
Well, I tried to reduce the number...for next time ! ;-)
I have applied just a few (quite orthogonal) of them, but due to other
patches I merged I get conflicts. Could you rebase on top of u-boot-imx
and then repost ? Thanks !
Best regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 42+ messages in thread
* Re: [PATCH v1 19/24] colibri-imx6ull: fix nand bch geometry
2022-04-13 7:32 ` Stefano Babic
@ 2022-04-13 8:06 ` Marcel Ziswiler
0 siblings, 0 replies; 42+ messages in thread
From: Marcel Ziswiler @ 2022-04-13 8:06 UTC (permalink / raw)
To: u-boot, sbabic; +Cc: festevam, han.xu, uboot-imx, miquel.raynal
Hi Stefano
On Wed, 2022-04-13 at 09:32 +0200, Stefano Babic wrote:
> Hi Marcel,
>
> On 08.04.22 10:24, Marcel Ziswiler wrote:
> > > Subject: [PATCH v1 19/24] colibri-imx6ull: fix nand bch geometry
> > > Date: Fri, 8 Apr 2022 10:07:14 +0200
> > > Message-Id: <20220408080719.342072-20-marcel@ziswiler.com>
> > > X-Mailer: git-send-email 2.34.1
> > > In-Reply-To: <20220408080719.342072-1-marcel@ziswiler.com>
> > > References: <20220408080719.342072-1-marcel@ziswiler.com>
> > > MIME-Version: 1.0
> > > Content-Transfer-Encoding: 8bit
> > >
> > > Result: 250
> > > (mbox) Adding cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> from line 'From: Marcel Ziswiler
> > <marcel.ziswiler@toradex.com>'
> > > (body) Adding cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> from line 'Signed-off-by: Marcel Ziswiler
> > <marcel.ziswiler@toradex.com>'
> > > (cc-cmd) Adding cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> from: 'tools/patman/patman send --cc-
> > > cmd
> > /tmp/patman.341838'
> > > (cc-cmd) Adding cc: u-boot@lists.denx.de from: 'tools/patman/patman send --cc-cmd /tmp/patman.341838'
> > > Requested action aborted
> > > Mails per session limit exceeded.
> >
> > Hehe, looks like I hit some arbitrary email limit somewhere. Let me figure out how I may send the last 5
> > patches...
>
> Well, I tried to reduce the number...for next time ! ;-)
Thanks! Yeah, 50 % applied, not too bad (;-p).
> I have applied just a few (quite orthogonal) of them, but due to other
> patches I merged I get conflicts. Could you rebase on top of u-boot-imx
> and then repost ? Thanks !
Okay, yeah. I just noticed that now. Sure, let me rebase/repost, no biggy.
And thanks for picking up on it again!
> Best regards,
> Stefano
Cheers
Marcel
^ permalink raw reply [flat|nested] 42+ messages in thread
end of thread, other threads:[~2022-04-13 8:06 UTC | newest]
Thread overview: 42+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-04-08 8:06 [PATCH v1 00/24] toradex updates: assortment of fixes and improvements Marcel Ziswiler
2022-04-08 8:06 ` [PATCH v1 01/24] arm64: dts: imx8mm-u-boot.dtsi: imx8mp-u-boot.dtsi: use atf-bl31 type Marcel Ziswiler
2022-04-12 18:44 ` sbabic
2022-04-08 8:06 ` [PATCH v1 02/24] configs: verdin-imx8mm: verdin-imx8mp: enable dm serial Marcel Ziswiler
2022-04-12 18:41 ` sbabic
2022-04-08 8:06 ` [PATCH v1 03/24] toradex: apalis-imx8x: drop support for apalis imx8x Marcel Ziswiler
2022-04-08 8:06 ` [PATCH v1 04/24] toradex: globally disable video support Marcel Ziswiler
2022-04-08 8:07 ` [PATCH v1 05/24] toradex: set default dhcp distroboot scriptname Marcel Ziswiler
2022-04-08 8:07 ` [PATCH v1 06/24] toradex: drop legacy nfsboot script Marcel Ziswiler
2022-04-08 8:07 ` [PATCH v1 07/24] include: colibri_vf: add missing tdxargs variable Marcel Ziswiler
2022-04-12 18:43 ` sbabic
2022-04-08 8:07 ` [PATCH v1 08/24] colibri-imx6ull: drop vidargs and remove video= settings Marcel Ziswiler
2022-04-12 18:47 ` sbabic
2022-04-08 8:07 ` [PATCH v1 09/24] configs: toradex: enable missing fit options Marcel Ziswiler
2022-04-08 8:07 ` [PATCH v1 10/24] configs: colibri-imx7/-emmc: enable booting from usb sdp Marcel Ziswiler
2022-04-08 8:07 ` [PATCH v1 11/24] apalis-imx6: avoid save environment unasked Marcel Ziswiler
2022-04-12 18:48 ` sbabic
2022-04-08 8:07 ` [PATCH v1 12/24] apalis-tk1: " Marcel Ziswiler
2022-04-12 18:42 ` sbabic
2022-04-08 8:07 ` [PATCH v1 13/24] board: colibri-imx6ull: Do not leave variant variable unset Marcel Ziswiler
2022-04-12 18:47 ` sbabic
2022-04-08 8:07 ` [PATCH v1 14/24] configs: tdx: Do not overwrite fdtfile if it got set manually Marcel Ziswiler
2022-04-08 8:07 ` [PATCH v1 15/24] regulator: fixed: add possibility to enable by clock Marcel Ziswiler
2022-04-12 18:45 ` sbabic
2022-04-08 8:07 ` [PATCH v1 16/24] board: colibri-imx6ull: fix detecting ethernet phy Marcel Ziswiler
2022-04-12 18:46 ` sbabic
2022-04-08 8:07 ` [PATCH v1 17/24] board: toradex: drop colibri pxa270 support Marcel Ziswiler
2022-04-08 8:07 ` [PATCH v1 18/24] disk: part: add the device search failed log msg Marcel Ziswiler
2022-04-12 18:44 ` sbabic
2022-04-08 8:07 ` [PATCH v1 19/24] colibri-imx6ull: fix nand bch geometry Marcel Ziswiler
2022-04-08 8:24 ` Marcel Ziswiler
2022-04-13 7:32 ` Stefano Babic
2022-04-13 8:06 ` Marcel Ziswiler
2022-04-08 10:27 ` Marcel Ziswiler
2022-04-12 18:42 ` sbabic
2022-04-08 10:27 ` [PATCH v1 20/24] board: colibri_imx7: fix usb start on solo Marcel Ziswiler
2022-04-08 10:28 ` [PATCH v1 21/24] configs: tdx: apalis_imx6: drop hw v1.0 support Marcel Ziswiler
2022-04-08 10:28 ` [PATCH v1 22/24] configs: tdx: apalis/colibri_imx6: use preboot as well Marcel Ziswiler
2022-04-08 10:28 ` [PATCH v1 23/24] configs: colibri-imx6ull/-emmc: use micrel ksz8xxx phy driver Marcel Ziswiler
2022-04-12 18:47 ` sbabic
2022-04-08 10:28 ` [PATCH v1 24/24] board: colibri-imx6ull: fix detecting sd card Marcel Ziswiler
2022-04-12 18:45 ` sbabic
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.