[PATCH 1/2] mtd: call of_platform_populate() for MTD partitions

[PATCH 1/2] mtd: call of_platform_populate() for MTD partitions

[Rafał Miłecki]

From: Rafał Miłecki <rafal@milecki.pl>

Until this change MTD subsystem supported handling partitions only with
MTD partitions parsers. That's a specific / limited API designed around
partitions.

Some MTD partitions may however require different handling. They may
contain specific data that needs to be parsed and somehow extracted. For
that purpose MTD subsystem should allow binding of standard platform
drivers.

An example can be U-Boot (sub)partition with environment variables.
There exist a "u-boot,env" DT binding for MTD (sub)partition that
requires an NVMEM driver.

Ref: 5db1c2dbc04c ("dt-bindings: nvmem: add U-Boot environment variables binding")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
 drivers/mtd/mtdpart.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 357661b62c94..9fce946fa69c 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -17,6 +17,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/err.h>
 #include <linux/of.h>
+#include <linux/of_platform.h>
 
 #include "mtdcore.h"
 
@@ -593,6 +594,7 @@ static int mtd_part_of_parse(struct mtd_info *master,
 			continue;
 		ret = mtd_part_do_parse(parser, master, pparts, NULL);
 		if (ret > 0) {
+			of_platform_populate(np, NULL, NULL, &master->dev);
 			of_node_put(np);
 			return ret;
 		}
@@ -600,6 +602,7 @@ static int mtd_part_of_parse(struct mtd_info *master,
 		if (ret < 0 && !err)
 			err = ret;
 	}
+	of_platform_populate(np, NULL, NULL, &master->dev);
 	of_node_put(np);
 
 	/*
-- 
2.34.1

[PATCH 1/2] mtd: call of_platform_populate() for MTD partitions

[Rafał Miłecki]

From: Rafał Miłecki <rafal@milecki.pl>

Until this change MTD subsystem supported handling partitions only with
MTD partitions parsers. That's a specific / limited API designed around
partitions.

Some MTD partitions may however require different handling. They may
contain specific data that needs to be parsed and somehow extracted. For
that purpose MTD subsystem should allow binding of standard platform
drivers.

An example can be U-Boot (sub)partition with environment variables.
There exist a "u-boot,env" DT binding for MTD (sub)partition that
requires an NVMEM driver.

Ref: 5db1c2dbc04c ("dt-bindings: nvmem: add U-Boot environment variables binding")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
 drivers/mtd/mtdpart.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 357661b62c94..9fce946fa69c 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -17,6 +17,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/err.h>
 #include <linux/of.h>
+#include <linux/of_platform.h>
 
 #include "mtdcore.h"
 
@@ -593,6 +594,7 @@ static int mtd_part_of_parse(struct mtd_info *master,
 			continue;
 		ret = mtd_part_do_parse(parser, master, pparts, NULL);
 		if (ret > 0) {
+			of_platform_populate(np, NULL, NULL, &master->dev);
 			of_node_put(np);
 			return ret;
 		}
@@ -600,6 +602,7 @@ static int mtd_part_of_parse(struct mtd_info *master,
 		if (ret < 0 && !err)
 			err = ret;
 	}
+	of_platform_populate(np, NULL, NULL, &master->dev);
 	of_node_put(np);
 
 	/*
-- 
2.34.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 1/2] mtd: call of_platform_populate() for MTD partitions

[Rafał Miłecki]

From: Rafał Miłecki <rafal@milecki.pl>

Until this change MTD subsystem supported handling partitions only with
MTD partitions parsers. That's a specific / limited API designed around
partitions.

Some MTD partitions may however require different handling. They may
contain specific data that needs to be parsed and somehow extracted. For
that purpose MTD subsystem should allow binding of standard platform
drivers.

An example can be U-Boot (sub)partition with environment variables.
There exist a "u-boot,env" DT binding for MTD (sub)partition that
requires an NVMEM driver.

Ref: 5db1c2dbc04c ("dt-bindings: nvmem: add U-Boot environment variables binding")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
 drivers/mtd/mtdpart.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c
index 357661b62c94..9fce946fa69c 100644
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
@@ -17,6 +17,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/err.h>
 #include <linux/of.h>
+#include <linux/of_platform.h>
 
 #include "mtdcore.h"
 
@@ -593,6 +594,7 @@ static int mtd_part_of_parse(struct mtd_info *master,
 			continue;
 		ret = mtd_part_do_parse(parser, master, pparts, NULL);
 		if (ret > 0) {
+			of_platform_populate(np, NULL, NULL, &master->dev);
 			of_node_put(np);
 			return ret;
 		}
@@ -600,6 +602,7 @@ static int mtd_part_of_parse(struct mtd_info *master,
 		if (ret < 0 && !err)
 			err = ret;
 	}
+	of_platform_populate(np, NULL, NULL, &master->dev);
 	of_node_put(np);
 
 	/*
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/2] nvmem: add driver handling U-Boot environment variables

[Rafał Miłecki]

From: Rafał Miłecki <rafal@milecki.pl>

U-Boot stores its setup as environment variables. It's a list of
key-value pairs stored on flash device with a custom header.

This commit adds an NVMEM driver that:
1. Provides NVMEM access to environment vars binary data
2. Extracts variables as NVMEM cells

It can be used for:
1. Accessing env variables from user-space
2. Reading NVMEM cells by Linux drivers

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
 MAINTAINERS                |   1 +
 drivers/nvmem/Kconfig      |  12 ++
 drivers/nvmem/Makefile     |   2 +
 drivers/nvmem/u-boot-env.c | 236 +++++++++++++++++++++++++++++++++++++
 4 files changed, 251 insertions(+)
 create mode 100644 drivers/nvmem/u-boot-env.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 4cb7fd127e68..122bf4230507 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20121,6 +20121,7 @@ U-BOOT ENVIRONMENT VARIABLES
 M:	Rafał Miłecki <rafal@milecki.pl>
 S:	Maintained
 F:	Documentation/devicetree/bindings/nvmem/u-boot,env.yaml
+F:	drivers/nvmem/u-boot-env.c
 
 UACCE ACCELERATOR FRAMEWORK
 M:	Zhangfei Gao <zhangfei.gao@linaro.org>
diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index 555aa77a574d..17a78b1ba077 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -324,4 +324,16 @@ config NVMEM_SUNPLUS_OCOTP
 	  This driver can also be built as a module. If so, the module
 	  will be called nvmem-sunplus-ocotp.
 
+config NVMEM_U_BOOT_ENV
+	tristate "U-Boot environment variables support"
+	depends on ARCH_BCM4908 || COMPILE_TEST
+	depends on OF && MTD
+	select CRC32
+	help
+	  U-Boot stores its setup as environment variables. This driver adds
+	  support for verifying & exporting such data. It also exposes variables
+	  as NVMEM cells so they can be referenced by other drivers.
+
+	  If compiled as module it will be called nvmem_u-boot-env.
+
 endif
diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
index 891958e29d25..84c8d75e59cf 100644
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@@ -65,3 +65,5 @@ obj-$(CONFIG_NVMEM_LAYERSCAPE_SFP)	+= nvmem-layerscape-sfp.o
 nvmem-layerscape-sfp-y		:= layerscape-sfp.o
 obj-$(CONFIG_NVMEM_SUNPLUS_OCOTP)	+= nvmem_sunplus_ocotp.o
 nvmem_sunplus_ocotp-y		:= sunplus-ocotp.o
+obj-$(CONFIG_NVMEM_U_BOOT_ENV)	+= nvmem_u-boot-env.o
+nvmem_u-boot-env-y		:= u-boot-env.o
diff --git a/drivers/nvmem/u-boot-env.c b/drivers/nvmem/u-boot-env.c
new file mode 100644
index 000000000000..c7945d7d5750
--- /dev/null
+++ b/drivers/nvmem/u-boot-env.c
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include <linux/crc32.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+enum u_boot_env_format {
+	U_BOOT_FORMAT_SINGLE,
+	U_BOOT_FORMAT_REDUNDANT,
+};
+
+struct u_boot_env {
+	struct device *dev;
+	enum u_boot_env_format format;
+
+	/* Parent device */
+	struct mtd_info *mtd;
+	size_t offset;
+	size_t size;
+
+	/* Cells */
+	struct nvmem_cell_info *cells;
+	int ncells;
+};
+
+struct u_boot_env_image_single {
+	__le32 crc32;
+	uint8_t data[0];
+} __packed;
+
+struct u_boot_env_image_redundant {
+	__le32 crc32;
+	u8 mark;
+	uint8_t data[0];
+} __packed;
+
+static int u_boot_env_read(void *context, unsigned int offset, void *val,
+			   size_t bytes)
+{
+	struct u_boot_env *priv = context;
+	struct device *dev = priv->dev;
+	size_t bytes_read;
+	int err;
+
+	err = mtd_read(priv->mtd, priv->offset + offset, bytes, &bytes_read, val);
+	if (err && !mtd_is_bitflip(err)) {
+		dev_err(dev, "Failed to read from mtd: %d\n", err);
+		return err;
+	}
+
+	if (bytes_read != bytes) {
+		dev_err(dev, "Failed to read %zd bytes\n", bytes);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int u_boot_env_add_cells(struct u_boot_env *priv, uint8_t *buf,
+				size_t data_offset, size_t data_len)
+{
+	struct device *dev = priv->dev;
+	char *data = buf + data_offset;
+	char *var, *value, *eq;
+	int idx;
+
+	priv->ncells = 0;
+	for (var = data; var < data + data_len && *var; var += strlen(var) + 1)
+		priv->ncells++;
+
+	priv->cells = devm_kcalloc(dev, priv->ncells, sizeof(*priv->cells), GFP_KERNEL);
+	if (!priv->cells)
+		return -ENOMEM;
+
+	for (var = data, idx = 0;
+	     var < data + data_len && *var;
+	     var = value + strlen(value) + 1, idx++) {
+		eq = strchr(var, '=');
+		if (!eq)
+			break;
+		*eq = '\0';
+		value = eq + 1;
+
+		priv->cells[idx].name = devm_kstrdup(dev, var, GFP_KERNEL);
+		if (!priv->cells[idx].name)
+			return -ENOMEM;
+		priv->cells[idx].offset = data_offset + value - data;
+		priv->cells[idx].bytes = strlen(value);
+	}
+
+	if (WARN_ON(idx != priv->ncells))
+		priv->ncells = idx;
+
+	return 0;
+}
+
+static int u_boot_env_parse(struct u_boot_env *priv)
+{
+	struct device *dev = priv->dev;
+	size_t crc32_data_offset;
+	size_t crc32_data_len;
+	size_t crc32_offset;
+	size_t data_offset;
+	size_t data_len;
+	uint32_t crc32;
+	uint32_t calc;
+	size_t bytes;
+	uint8_t *buf;
+	int err;
+
+	buf = kcalloc(1, priv->size, GFP_KERNEL);
+	if (!buf) {
+		err = -ENOMEM;
+		goto err_out;
+	}
+
+	err = mtd_read(priv->mtd, priv->offset, priv->size, &bytes, buf);
+	if ((err && !mtd_is_bitflip(err)) || bytes != priv->size) {
+		dev_err(dev, "Failed to read from mtd: %d\n", err);
+		goto err_kfree;
+	}
+
+	switch (priv->format) {
+	case U_BOOT_FORMAT_SINGLE:
+		crc32_offset = offsetof(struct u_boot_env_image_single, crc32);
+		crc32_data_offset = offsetof(struct u_boot_env_image_single, data);
+		data_offset = offsetof(struct u_boot_env_image_single, data);
+		break;
+	case U_BOOT_FORMAT_REDUNDANT:
+		crc32_offset = offsetof(struct u_boot_env_image_redundant, crc32);
+		crc32_data_offset = offsetof(struct u_boot_env_image_redundant, mark);
+		data_offset = offsetof(struct u_boot_env_image_redundant, data);
+		break;
+	}
+	crc32 = le32_to_cpu(*(uint32_t *)(buf + crc32_offset));
+	crc32_data_len = priv->size - crc32_data_offset;
+	data_len = priv->size - data_offset;
+
+	calc = crc32(~0, buf + crc32_data_offset, crc32_data_len) ^ ~0L;
+	if (calc != crc32) {
+		dev_err(dev, "Invalid calculated CRC32: 0x%08x (expected: 0x%08x)\n", calc, crc32);
+		err = -EINVAL;
+		goto err_kfree;
+	}
+
+	buf[priv->size - 1] = '\0';
+	err = u_boot_env_add_cells(priv, buf, data_offset, data_len);
+	if (err)
+		dev_err(dev, "Failed to add cells: %d\n", err);
+
+err_kfree:
+	kfree(buf);
+err_out:
+	return err;
+}
+
+static const struct of_device_id u_boot_env_of_match_table[] = {
+	{ .compatible = "u-boot,env", .data = (void *)U_BOOT_FORMAT_SINGLE, },
+	{ .compatible = "u-boot,env-redundant-bool", .data = (void *)U_BOOT_FORMAT_REDUNDANT, },
+	{ .compatible = "u-boot,env-redundant-count", .data = (void *)U_BOOT_FORMAT_REDUNDANT, },
+	{},
+};
+
+static int u_boot_env_probe(struct platform_device *pdev)
+{
+	struct nvmem_config config = {
+		.name = "u-boot-env",
+		.reg_read = u_boot_env_read,
+	};
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	const struct of_device_id *of_id;
+	struct u_boot_env *priv;
+	const char *label;
+	int err;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	priv->dev = dev;
+
+	of_id = of_match_device(u_boot_env_of_match_table, dev);
+	if (!of_id)
+		return -EINVAL;
+	priv->format = (uintptr_t)of_id->data;
+
+	if (of_property_read_u32(np, "reg", (u32 *)&priv->offset) ||
+	    of_property_read_u32_index(np, "reg", 1, (u32 *)&priv->size)) {
+		dev_err(dev, "Failed to read \"reg\" property\n");
+		return -EINVAL;
+	}
+
+	label = of_get_property(np->parent, "label", NULL);
+	if (!label)
+		label = np->parent->name;
+
+	priv->mtd = get_mtd_device_nm(label);
+	if (IS_ERR(priv->mtd)) {
+		dev_err(dev, "Failed to find \"%s\" MTD device: %ld\n", label, PTR_ERR(priv->mtd));
+		return PTR_ERR(priv->mtd);
+	}
+
+	err = u_boot_env_parse(priv);
+	if (err)
+		return err;
+
+	config.dev = dev;
+	config.cells = priv->cells;
+	config.ncells = priv->ncells;
+	config.priv = priv;
+	config.size = priv->size;
+
+	return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &config));
+}
+
+static struct platform_driver u_boot_env_driver = {
+	.probe = u_boot_env_probe,
+	.driver = {
+		.name = "u_boot_env",
+		.of_match_table = u_boot_env_of_match_table,
+	},
+};
+module_platform_driver(u_boot_env_driver);
+
+MODULE_AUTHOR("Rafał Miłecki");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(of, u_boot_env_of_match_table);
-- 
2.34.1

[PATCH 2/2] nvmem: add driver handling U-Boot environment variables

[Rafał Miłecki]

From: Rafał Miłecki <rafal@milecki.pl>

U-Boot stores its setup as environment variables. It's a list of
key-value pairs stored on flash device with a custom header.

This commit adds an NVMEM driver that:
1. Provides NVMEM access to environment vars binary data
2. Extracts variables as NVMEM cells

It can be used for:
1. Accessing env variables from user-space
2. Reading NVMEM cells by Linux drivers

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
 MAINTAINERS                |   1 +
 drivers/nvmem/Kconfig      |  12 ++
 drivers/nvmem/Makefile     |   2 +
 drivers/nvmem/u-boot-env.c | 236 +++++++++++++++++++++++++++++++++++++
 4 files changed, 251 insertions(+)
 create mode 100644 drivers/nvmem/u-boot-env.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 4cb7fd127e68..122bf4230507 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20121,6 +20121,7 @@ U-BOOT ENVIRONMENT VARIABLES
 M:	Rafał Miłecki <rafal@milecki.pl>
 S:	Maintained
 F:	Documentation/devicetree/bindings/nvmem/u-boot,env.yaml
+F:	drivers/nvmem/u-boot-env.c
 
 UACCE ACCELERATOR FRAMEWORK
 M:	Zhangfei Gao <zhangfei.gao@linaro.org>
diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index 555aa77a574d..17a78b1ba077 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -324,4 +324,16 @@ config NVMEM_SUNPLUS_OCOTP
 	  This driver can also be built as a module. If so, the module
 	  will be called nvmem-sunplus-ocotp.
 
+config NVMEM_U_BOOT_ENV
+	tristate "U-Boot environment variables support"
+	depends on ARCH_BCM4908 || COMPILE_TEST
+	depends on OF && MTD
+	select CRC32
+	help
+	  U-Boot stores its setup as environment variables. This driver adds
+	  support for verifying & exporting such data. It also exposes variables
+	  as NVMEM cells so they can be referenced by other drivers.
+
+	  If compiled as module it will be called nvmem_u-boot-env.
+
 endif
diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
index 891958e29d25..84c8d75e59cf 100644
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@@ -65,3 +65,5 @@ obj-$(CONFIG_NVMEM_LAYERSCAPE_SFP)	+= nvmem-layerscape-sfp.o
 nvmem-layerscape-sfp-y		:= layerscape-sfp.o
 obj-$(CONFIG_NVMEM_SUNPLUS_OCOTP)	+= nvmem_sunplus_ocotp.o
 nvmem_sunplus_ocotp-y		:= sunplus-ocotp.o
+obj-$(CONFIG_NVMEM_U_BOOT_ENV)	+= nvmem_u-boot-env.o
+nvmem_u-boot-env-y		:= u-boot-env.o
diff --git a/drivers/nvmem/u-boot-env.c b/drivers/nvmem/u-boot-env.c
new file mode 100644
index 000000000000..c7945d7d5750
--- /dev/null
+++ b/drivers/nvmem/u-boot-env.c
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include <linux/crc32.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+enum u_boot_env_format {
+	U_BOOT_FORMAT_SINGLE,
+	U_BOOT_FORMAT_REDUNDANT,
+};
+
+struct u_boot_env {
+	struct device *dev;
+	enum u_boot_env_format format;
+
+	/* Parent device */
+	struct mtd_info *mtd;
+	size_t offset;
+	size_t size;
+
+	/* Cells */
+	struct nvmem_cell_info *cells;
+	int ncells;
+};
+
+struct u_boot_env_image_single {
+	__le32 crc32;
+	uint8_t data[0];
+} __packed;
+
+struct u_boot_env_image_redundant {
+	__le32 crc32;
+	u8 mark;
+	uint8_t data[0];
+} __packed;
+
+static int u_boot_env_read(void *context, unsigned int offset, void *val,
+			   size_t bytes)
+{
+	struct u_boot_env *priv = context;
+	struct device *dev = priv->dev;
+	size_t bytes_read;
+	int err;
+
+	err = mtd_read(priv->mtd, priv->offset + offset, bytes, &bytes_read, val);
+	if (err && !mtd_is_bitflip(err)) {
+		dev_err(dev, "Failed to read from mtd: %d\n", err);
+		return err;
+	}
+
+	if (bytes_read != bytes) {
+		dev_err(dev, "Failed to read %zd bytes\n", bytes);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int u_boot_env_add_cells(struct u_boot_env *priv, uint8_t *buf,
+				size_t data_offset, size_t data_len)
+{
+	struct device *dev = priv->dev;
+	char *data = buf + data_offset;
+	char *var, *value, *eq;
+	int idx;
+
+	priv->ncells = 0;
+	for (var = data; var < data + data_len && *var; var += strlen(var) + 1)
+		priv->ncells++;
+
+	priv->cells = devm_kcalloc(dev, priv->ncells, sizeof(*priv->cells), GFP_KERNEL);
+	if (!priv->cells)
+		return -ENOMEM;
+
+	for (var = data, idx = 0;
+	     var < data + data_len && *var;
+	     var = value + strlen(value) + 1, idx++) {
+		eq = strchr(var, '=');
+		if (!eq)
+			break;
+		*eq = '\0';
+		value = eq + 1;
+
+		priv->cells[idx].name = devm_kstrdup(dev, var, GFP_KERNEL);
+		if (!priv->cells[idx].name)
+			return -ENOMEM;
+		priv->cells[idx].offset = data_offset + value - data;
+		priv->cells[idx].bytes = strlen(value);
+	}
+
+	if (WARN_ON(idx != priv->ncells))
+		priv->ncells = idx;
+
+	return 0;
+}
+
+static int u_boot_env_parse(struct u_boot_env *priv)
+{
+	struct device *dev = priv->dev;
+	size_t crc32_data_offset;
+	size_t crc32_data_len;
+	size_t crc32_offset;
+	size_t data_offset;
+	size_t data_len;
+	uint32_t crc32;
+	uint32_t calc;
+	size_t bytes;
+	uint8_t *buf;
+	int err;
+
+	buf = kcalloc(1, priv->size, GFP_KERNEL);
+	if (!buf) {
+		err = -ENOMEM;
+		goto err_out;
+	}
+
+	err = mtd_read(priv->mtd, priv->offset, priv->size, &bytes, buf);
+	if ((err && !mtd_is_bitflip(err)) || bytes != priv->size) {
+		dev_err(dev, "Failed to read from mtd: %d\n", err);
+		goto err_kfree;
+	}
+
+	switch (priv->format) {
+	case U_BOOT_FORMAT_SINGLE:
+		crc32_offset = offsetof(struct u_boot_env_image_single, crc32);
+		crc32_data_offset = offsetof(struct u_boot_env_image_single, data);
+		data_offset = offsetof(struct u_boot_env_image_single, data);
+		break;
+	case U_BOOT_FORMAT_REDUNDANT:
+		crc32_offset = offsetof(struct u_boot_env_image_redundant, crc32);
+		crc32_data_offset = offsetof(struct u_boot_env_image_redundant, mark);
+		data_offset = offsetof(struct u_boot_env_image_redundant, data);
+		break;
+	}
+	crc32 = le32_to_cpu(*(uint32_t *)(buf + crc32_offset));
+	crc32_data_len = priv->size - crc32_data_offset;
+	data_len = priv->size - data_offset;
+
+	calc = crc32(~0, buf + crc32_data_offset, crc32_data_len) ^ ~0L;
+	if (calc != crc32) {
+		dev_err(dev, "Invalid calculated CRC32: 0x%08x (expected: 0x%08x)\n", calc, crc32);
+		err = -EINVAL;
+		goto err_kfree;
+	}
+
+	buf[priv->size - 1] = '\0';
+	err = u_boot_env_add_cells(priv, buf, data_offset, data_len);
+	if (err)
+		dev_err(dev, "Failed to add cells: %d\n", err);
+
+err_kfree:
+	kfree(buf);
+err_out:
+	return err;
+}
+
+static const struct of_device_id u_boot_env_of_match_table[] = {
+	{ .compatible = "u-boot,env", .data = (void *)U_BOOT_FORMAT_SINGLE, },
+	{ .compatible = "u-boot,env-redundant-bool", .data = (void *)U_BOOT_FORMAT_REDUNDANT, },
+	{ .compatible = "u-boot,env-redundant-count", .data = (void *)U_BOOT_FORMAT_REDUNDANT, },
+	{},
+};
+
+static int u_boot_env_probe(struct platform_device *pdev)
+{
+	struct nvmem_config config = {
+		.name = "u-boot-env",
+		.reg_read = u_boot_env_read,
+	};
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	const struct of_device_id *of_id;
+	struct u_boot_env *priv;
+	const char *label;
+	int err;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	priv->dev = dev;
+
+	of_id = of_match_device(u_boot_env_of_match_table, dev);
+	if (!of_id)
+		return -EINVAL;
+	priv->format = (uintptr_t)of_id->data;
+
+	if (of_property_read_u32(np, "reg", (u32 *)&priv->offset) ||
+	    of_property_read_u32_index(np, "reg", 1, (u32 *)&priv->size)) {
+		dev_err(dev, "Failed to read \"reg\" property\n");
+		return -EINVAL;
+	}
+
+	label = of_get_property(np->parent, "label", NULL);
+	if (!label)
+		label = np->parent->name;
+
+	priv->mtd = get_mtd_device_nm(label);
+	if (IS_ERR(priv->mtd)) {
+		dev_err(dev, "Failed to find \"%s\" MTD device: %ld\n", label, PTR_ERR(priv->mtd));
+		return PTR_ERR(priv->mtd);
+	}
+
+	err = u_boot_env_parse(priv);
+	if (err)
+		return err;
+
+	config.dev = dev;
+	config.cells = priv->cells;
+	config.ncells = priv->ncells;
+	config.priv = priv;
+	config.size = priv->size;
+
+	return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &config));
+}
+
+static struct platform_driver u_boot_env_driver = {
+	.probe = u_boot_env_probe,
+	.driver = {
+		.name = "u_boot_env",
+		.of_match_table = u_boot_env_of_match_table,
+	},
+};
+module_platform_driver(u_boot_env_driver);
+
+MODULE_AUTHOR("Rafał Miłecki");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(of, u_boot_env_of_match_table);
-- 
2.34.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH 2/2] nvmem: add driver handling U-Boot environment variables

[Rafał Miłecki]

From: Rafał Miłecki <rafal@milecki.pl>

U-Boot stores its setup as environment variables. It's a list of
key-value pairs stored on flash device with a custom header.

This commit adds an NVMEM driver that:
1. Provides NVMEM access to environment vars binary data
2. Extracts variables as NVMEM cells

It can be used for:
1. Accessing env variables from user-space
2. Reading NVMEM cells by Linux drivers

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
 MAINTAINERS                |   1 +
 drivers/nvmem/Kconfig      |  12 ++
 drivers/nvmem/Makefile     |   2 +
 drivers/nvmem/u-boot-env.c | 236 +++++++++++++++++++++++++++++++++++++
 4 files changed, 251 insertions(+)
 create mode 100644 drivers/nvmem/u-boot-env.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 4cb7fd127e68..122bf4230507 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20121,6 +20121,7 @@ U-BOOT ENVIRONMENT VARIABLES
 M:	Rafał Miłecki <rafal@milecki.pl>
 S:	Maintained
 F:	Documentation/devicetree/bindings/nvmem/u-boot,env.yaml
+F:	drivers/nvmem/u-boot-env.c
 
 UACCE ACCELERATOR FRAMEWORK
 M:	Zhangfei Gao <zhangfei.gao@linaro.org>
diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index 555aa77a574d..17a78b1ba077 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -324,4 +324,16 @@ config NVMEM_SUNPLUS_OCOTP
 	  This driver can also be built as a module. If so, the module
 	  will be called nvmem-sunplus-ocotp.
 
+config NVMEM_U_BOOT_ENV
+	tristate "U-Boot environment variables support"
+	depends on ARCH_BCM4908 || COMPILE_TEST
+	depends on OF && MTD
+	select CRC32
+	help
+	  U-Boot stores its setup as environment variables. This driver adds
+	  support for verifying & exporting such data. It also exposes variables
+	  as NVMEM cells so they can be referenced by other drivers.
+
+	  If compiled as module it will be called nvmem_u-boot-env.
+
 endif
diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
index 891958e29d25..84c8d75e59cf 100644
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@@ -65,3 +65,5 @@ obj-$(CONFIG_NVMEM_LAYERSCAPE_SFP)	+= nvmem-layerscape-sfp.o
 nvmem-layerscape-sfp-y		:= layerscape-sfp.o
 obj-$(CONFIG_NVMEM_SUNPLUS_OCOTP)	+= nvmem_sunplus_ocotp.o
 nvmem_sunplus_ocotp-y		:= sunplus-ocotp.o
+obj-$(CONFIG_NVMEM_U_BOOT_ENV)	+= nvmem_u-boot-env.o
+nvmem_u-boot-env-y		:= u-boot-env.o
diff --git a/drivers/nvmem/u-boot-env.c b/drivers/nvmem/u-boot-env.c
new file mode 100644
index 000000000000..c7945d7d5750
--- /dev/null
+++ b/drivers/nvmem/u-boot-env.c
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include <linux/crc32.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+enum u_boot_env_format {
+	U_BOOT_FORMAT_SINGLE,
+	U_BOOT_FORMAT_REDUNDANT,
+};
+
+struct u_boot_env {
+	struct device *dev;
+	enum u_boot_env_format format;
+
+	/* Parent device */
+	struct mtd_info *mtd;
+	size_t offset;
+	size_t size;
+
+	/* Cells */
+	struct nvmem_cell_info *cells;
+	int ncells;
+};
+
+struct u_boot_env_image_single {
+	__le32 crc32;
+	uint8_t data[0];
+} __packed;
+
+struct u_boot_env_image_redundant {
+	__le32 crc32;
+	u8 mark;
+	uint8_t data[0];
+} __packed;
+
+static int u_boot_env_read(void *context, unsigned int offset, void *val,
+			   size_t bytes)
+{
+	struct u_boot_env *priv = context;
+	struct device *dev = priv->dev;
+	size_t bytes_read;
+	int err;
+
+	err = mtd_read(priv->mtd, priv->offset + offset, bytes, &bytes_read, val);
+	if (err && !mtd_is_bitflip(err)) {
+		dev_err(dev, "Failed to read from mtd: %d\n", err);
+		return err;
+	}
+
+	if (bytes_read != bytes) {
+		dev_err(dev, "Failed to read %zd bytes\n", bytes);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int u_boot_env_add_cells(struct u_boot_env *priv, uint8_t *buf,
+				size_t data_offset, size_t data_len)
+{
+	struct device *dev = priv->dev;
+	char *data = buf + data_offset;
+	char *var, *value, *eq;
+	int idx;
+
+	priv->ncells = 0;
+	for (var = data; var < data + data_len && *var; var += strlen(var) + 1)
+		priv->ncells++;
+
+	priv->cells = devm_kcalloc(dev, priv->ncells, sizeof(*priv->cells), GFP_KERNEL);
+	if (!priv->cells)
+		return -ENOMEM;
+
+	for (var = data, idx = 0;
+	     var < data + data_len && *var;
+	     var = value + strlen(value) + 1, idx++) {
+		eq = strchr(var, '=');
+		if (!eq)
+			break;
+		*eq = '\0';
+		value = eq + 1;
+
+		priv->cells[idx].name = devm_kstrdup(dev, var, GFP_KERNEL);
+		if (!priv->cells[idx].name)
+			return -ENOMEM;
+		priv->cells[idx].offset = data_offset + value - data;
+		priv->cells[idx].bytes = strlen(value);
+	}
+
+	if (WARN_ON(idx != priv->ncells))
+		priv->ncells = idx;
+
+	return 0;
+}
+
+static int u_boot_env_parse(struct u_boot_env *priv)
+{
+	struct device *dev = priv->dev;
+	size_t crc32_data_offset;
+	size_t crc32_data_len;
+	size_t crc32_offset;
+	size_t data_offset;
+	size_t data_len;
+	uint32_t crc32;
+	uint32_t calc;
+	size_t bytes;
+	uint8_t *buf;
+	int err;
+
+	buf = kcalloc(1, priv->size, GFP_KERNEL);
+	if (!buf) {
+		err = -ENOMEM;
+		goto err_out;
+	}
+
+	err = mtd_read(priv->mtd, priv->offset, priv->size, &bytes, buf);
+	if ((err && !mtd_is_bitflip(err)) || bytes != priv->size) {
+		dev_err(dev, "Failed to read from mtd: %d\n", err);
+		goto err_kfree;
+	}
+
+	switch (priv->format) {
+	case U_BOOT_FORMAT_SINGLE:
+		crc32_offset = offsetof(struct u_boot_env_image_single, crc32);
+		crc32_data_offset = offsetof(struct u_boot_env_image_single, data);
+		data_offset = offsetof(struct u_boot_env_image_single, data);
+		break;
+	case U_BOOT_FORMAT_REDUNDANT:
+		crc32_offset = offsetof(struct u_boot_env_image_redundant, crc32);
+		crc32_data_offset = offsetof(struct u_boot_env_image_redundant, mark);
+		data_offset = offsetof(struct u_boot_env_image_redundant, data);
+		break;
+	}
+	crc32 = le32_to_cpu(*(uint32_t *)(buf + crc32_offset));
+	crc32_data_len = priv->size - crc32_data_offset;
+	data_len = priv->size - data_offset;
+
+	calc = crc32(~0, buf + crc32_data_offset, crc32_data_len) ^ ~0L;
+	if (calc != crc32) {
+		dev_err(dev, "Invalid calculated CRC32: 0x%08x (expected: 0x%08x)\n", calc, crc32);
+		err = -EINVAL;
+		goto err_kfree;
+	}
+
+	buf[priv->size - 1] = '\0';
+	err = u_boot_env_add_cells(priv, buf, data_offset, data_len);
+	if (err)
+		dev_err(dev, "Failed to add cells: %d\n", err);
+
+err_kfree:
+	kfree(buf);
+err_out:
+	return err;
+}
+
+static const struct of_device_id u_boot_env_of_match_table[] = {
+	{ .compatible = "u-boot,env", .data = (void *)U_BOOT_FORMAT_SINGLE, },
+	{ .compatible = "u-boot,env-redundant-bool", .data = (void *)U_BOOT_FORMAT_REDUNDANT, },
+	{ .compatible = "u-boot,env-redundant-count", .data = (void *)U_BOOT_FORMAT_REDUNDANT, },
+	{},
+};
+
+static int u_boot_env_probe(struct platform_device *pdev)
+{
+	struct nvmem_config config = {
+		.name = "u-boot-env",
+		.reg_read = u_boot_env_read,
+	};
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	const struct of_device_id *of_id;
+	struct u_boot_env *priv;
+	const char *label;
+	int err;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	priv->dev = dev;
+
+	of_id = of_match_device(u_boot_env_of_match_table, dev);
+	if (!of_id)
+		return -EINVAL;
+	priv->format = (uintptr_t)of_id->data;
+
+	if (of_property_read_u32(np, "reg", (u32 *)&priv->offset) ||
+	    of_property_read_u32_index(np, "reg", 1, (u32 *)&priv->size)) {
+		dev_err(dev, "Failed to read \"reg\" property\n");
+		return -EINVAL;
+	}
+
+	label = of_get_property(np->parent, "label", NULL);
+	if (!label)
+		label = np->parent->name;
+
+	priv->mtd = get_mtd_device_nm(label);
+	if (IS_ERR(priv->mtd)) {
+		dev_err(dev, "Failed to find \"%s\" MTD device: %ld\n", label, PTR_ERR(priv->mtd));
+		return PTR_ERR(priv->mtd);
+	}
+
+	err = u_boot_env_parse(priv);
+	if (err)
+		return err;
+
+	config.dev = dev;
+	config.cells = priv->cells;
+	config.ncells = priv->ncells;
+	config.priv = priv;
+	config.size = priv->size;
+
+	return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &config));
+}
+
+static struct platform_driver u_boot_env_driver = {
+	.probe = u_boot_env_probe,
+	.driver = {
+		.name = "u_boot_env",
+		.of_match_table = u_boot_env_of_match_table,
+	},
+};
+module_platform_driver(u_boot_env_driver);
+
+MODULE_AUTHOR("Rafał Miłecki");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(of, u_boot_env_of_match_table);
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/2] nvmem: add driver handling U-Boot environment variables

[Miquel Raynal]

On Wed, 2022-04-06 at 14:32:25 UTC, =?utf-8?b?UmFmYcWCIE1pxYJlY2tp?= wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
> 
> U-Boot stores its setup as environment variables. It's a list of
> key-value pairs stored on flash device with a custom header.
> 
> This commit adds an NVMEM driver that:
> 1. Provides NVMEM access to environment vars binary data
> 2. Extracts variables as NVMEM cells
> 
> It can be used for:
> 1. Accessing env variables from user-space
> 2. Reading NVMEM cells by Linux drivers
> 
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next, thanks.

Miquel

Re: [PATCH 2/2] nvmem: add driver handling U-Boot environment variables

[Miquel Raynal]

On Wed, 2022-04-06 at 14:32:25 UTC, =?utf-8?b?UmFmYcWCIE1pxYJlY2tp?= wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
> 
> U-Boot stores its setup as environment variables. It's a list of
> key-value pairs stored on flash device with a custom header.
> 
> This commit adds an NVMEM driver that:
> 1. Provides NVMEM access to environment vars binary data
> 2. Extracts variables as NVMEM cells
> 
> It can be used for:
> 1. Accessing env variables from user-space
> 2. Reading NVMEM cells by Linux drivers
> 
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next, thanks.

Miquel

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH 2/2] nvmem: add driver handling U-Boot environment variables

[Miquel Raynal]

On Wed, 2022-04-06 at 14:32:25 UTC, =?utf-8?b?UmFmYcWCIE1pxYJlY2tp?= wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
> 
> U-Boot stores its setup as environment variables. It's a list of
> key-value pairs stored on flash device with a custom header.
> 
> This commit adds an NVMEM driver that:
> 1. Provides NVMEM access to environment vars binary data
> 2. Extracts variables as NVMEM cells
> 
> It can be used for:
> 1. Accessing env variables from user-space
> 2. Reading NVMEM cells by Linux drivers
> 
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next, thanks.

Miquel

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/2] mtd: call of_platform_populate() for MTD partitions

[Miquel Raynal]

On Wed, 2022-04-06 at 14:32:24 UTC, =?utf-8?b?UmFmYcWCIE1pxYJlY2tp?= wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
> 
> Until this change MTD subsystem supported handling partitions only with
> MTD partitions parsers. That's a specific / limited API designed around
> partitions.
> 
> Some MTD partitions may however require different handling. They may
> contain specific data that needs to be parsed and somehow extracted. For
> that purpose MTD subsystem should allow binding of standard platform
> drivers.
> 
> An example can be U-Boot (sub)partition with environment variables.
> There exist a "u-boot,env" DT binding for MTD (sub)partition that
> requires an NVMEM driver.
> 
> Ref: 5db1c2dbc04c ("dt-bindings: nvmem: add U-Boot environment variables binding")
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next, thanks.

Miquel

Re: [PATCH 1/2] mtd: call of_platform_populate() for MTD partitions

[Miquel Raynal]

On Wed, 2022-04-06 at 14:32:24 UTC, =?utf-8?b?UmFmYcWCIE1pxYJlY2tp?= wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
> 
> Until this change MTD subsystem supported handling partitions only with
> MTD partitions parsers. That's a specific / limited API designed around
> partitions.
> 
> Some MTD partitions may however require different handling. They may
> contain specific data that needs to be parsed and somehow extracted. For
> that purpose MTD subsystem should allow binding of standard platform
> drivers.
> 
> An example can be U-Boot (sub)partition with environment variables.
> There exist a "u-boot,env" DT binding for MTD (sub)partition that
> requires an NVMEM driver.
> 
> Ref: 5db1c2dbc04c ("dt-bindings: nvmem: add U-Boot environment variables binding")
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next, thanks.

Miquel

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH 1/2] mtd: call of_platform_populate() for MTD partitions

[Miquel Raynal]

On Wed, 2022-04-06 at 14:32:24 UTC, =?utf-8?b?UmFmYcWCIE1pxYJlY2tp?= wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
> 
> Until this change MTD subsystem supported handling partitions only with
> MTD partitions parsers. That's a specific / limited API designed around
> partitions.
> 
> Some MTD partitions may however require different handling. They may
> contain specific data that needs to be parsed and somehow extracted. For
> that purpose MTD subsystem should allow binding of standard platform
> drivers.
> 
> An example can be U-Boot (sub)partition with environment variables.
> There exist a "u-boot,env" DT binding for MTD (sub)partition that
> requires an NVMEM driver.
> 
> Ref: 5db1c2dbc04c ("dt-bindings: nvmem: add U-Boot environment variables binding")
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next, thanks.

Miquel

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/2] nvmem: add driver handling U-Boot environment variables

[Srinivas Kandagatla]

On 11/04/2022 09:59, Miquel Raynal wrote:
> On Wed, 2022-04-06 at 14:32:25 UTC, =?utf-8?b?UmFmYcWCIE1pxYJlY2tp?= wrote:
>> From: Rafał Miłecki <rafal@milecki.pl>
>>
>> U-Boot stores its setup as environment variables. It's a list of
>> key-value pairs stored on flash device with a custom header.
>>
>> This commit adds an NVMEM driver that:
>> 1. Provides NVMEM access to environment vars binary data
>> 2. Extracts variables as NVMEM cells
>>
>> It can be used for:
>> 1. Accessing env variables from user-space
>> 2. Reading NVMEM cells by Linux drivers
>>
>> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> 
> Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next, thanks.

Hi Miquel,

Any reason why this nvmem driver is taken via mtd tree?

This is going to conflict with other nvmem patches that are touching 
KConfig and Makefile


--srini
> 
> Miquel

Re: [PATCH 2/2] nvmem: add driver handling U-Boot environment variables

[Srinivas Kandagatla]

On 11/04/2022 09:59, Miquel Raynal wrote:
> On Wed, 2022-04-06 at 14:32:25 UTC, =?utf-8?b?UmFmYcWCIE1pxYJlY2tp?= wrote:
>> From: Rafał Miłecki <rafal@milecki.pl>
>>
>> U-Boot stores its setup as environment variables. It's a list of
>> key-value pairs stored on flash device with a custom header.
>>
>> This commit adds an NVMEM driver that:
>> 1. Provides NVMEM access to environment vars binary data
>> 2. Extracts variables as NVMEM cells
>>
>> It can be used for:
>> 1. Accessing env variables from user-space
>> 2. Reading NVMEM cells by Linux drivers
>>
>> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> 
> Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next, thanks.

Hi Miquel,

Any reason why this nvmem driver is taken via mtd tree?

This is going to conflict with other nvmem patches that are touching 
KConfig and Makefile


--srini
> 
> Miquel

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH 2/2] nvmem: add driver handling U-Boot environment variables

[Srinivas Kandagatla]

On 11/04/2022 09:59, Miquel Raynal wrote:
> On Wed, 2022-04-06 at 14:32:25 UTC, =?utf-8?b?UmFmYcWCIE1pxYJlY2tp?= wrote:
>> From: Rafał Miłecki <rafal@milecki.pl>
>>
>> U-Boot stores its setup as environment variables. It's a list of
>> key-value pairs stored on flash device with a custom header.
>>
>> This commit adds an NVMEM driver that:
>> 1. Provides NVMEM access to environment vars binary data
>> 2. Extracts variables as NVMEM cells
>>
>> It can be used for:
>> 1. Accessing env variables from user-space
>> 2. Reading NVMEM cells by Linux drivers
>>
>> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> 
> Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next, thanks.

Hi Miquel,

Any reason why this nvmem driver is taken via mtd tree?

This is going to conflict with other nvmem patches that are touching 
KConfig and Makefile


--srini
> 
> Miquel

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/2] nvmem: add driver handling U-Boot environment variables

[Miquel Raynal]

Hi Srinivas,

srinivas.kandagatla@linaro.org wrote on Mon, 11 Apr 2022 10:45:53 +0100:

> On 11/04/2022 09:59, Miquel Raynal wrote:
> > On Wed, 2022-04-06 at 14:32:25 UTC, =?utf-8?b?UmFmYcWCIE1pxYJlY2tp?= wrote:  
> >> From: Rafał Miłecki <rafal@milecki.pl>
> >>
> >> U-Boot stores its setup as environment variables. It's a list of
> >> key-value pairs stored on flash device with a custom header.
> >>
> >> This commit adds an NVMEM driver that:
> >> 1. Provides NVMEM access to environment vars binary data
> >> 2. Extracts variables as NVMEM cells
> >>
> >> It can be used for:
> >> 1. Accessing env variables from user-space
> >> 2. Reading NVMEM cells by Linux drivers
> >>
> >> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>  
> > 
> > Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next, thanks.  
> 
> Hi Miquel,
> 
> Any reason why this nvmem driver is taken via mtd tree?
> 
> This is going to conflict with other nvmem patches that are touching KConfig and Makefile

Sorry I selected it by mistake. I'll let you take it through nvmem
unless there is still something missing on your side?

Anyway, it's now dropped from mtd.

Thanks,
Miquèl

Re: [PATCH 2/2] nvmem: add driver handling U-Boot environment variables

[Miquel Raynal]

Hi Srinivas,

srinivas.kandagatla@linaro.org wrote on Mon, 11 Apr 2022 10:45:53 +0100:

> On 11/04/2022 09:59, Miquel Raynal wrote:
> > On Wed, 2022-04-06 at 14:32:25 UTC, =?utf-8?b?UmFmYcWCIE1pxYJlY2tp?= wrote:  
> >> From: Rafał Miłecki <rafal@milecki.pl>
> >>
> >> U-Boot stores its setup as environment variables. It's a list of
> >> key-value pairs stored on flash device with a custom header.
> >>
> >> This commit adds an NVMEM driver that:
> >> 1. Provides NVMEM access to environment vars binary data
> >> 2. Extracts variables as NVMEM cells
> >>
> >> It can be used for:
> >> 1. Accessing env variables from user-space
> >> 2. Reading NVMEM cells by Linux drivers
> >>
> >> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>  
> > 
> > Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next, thanks.  
> 
> Hi Miquel,
> 
> Any reason why this nvmem driver is taken via mtd tree?
> 
> This is going to conflict with other nvmem patches that are touching KConfig and Makefile

Sorry I selected it by mistake. I'll let you take it through nvmem
unless there is still something missing on your side?

Anyway, it's now dropped from mtd.

Thanks,
Miquèl

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH 2/2] nvmem: add driver handling U-Boot environment variables

[Miquel Raynal]

Hi Srinivas,

srinivas.kandagatla@linaro.org wrote on Mon, 11 Apr 2022 10:45:53 +0100:

> On 11/04/2022 09:59, Miquel Raynal wrote:
> > On Wed, 2022-04-06 at 14:32:25 UTC, =?utf-8?b?UmFmYcWCIE1pxYJlY2tp?= wrote:  
> >> From: Rafał Miłecki <rafal@milecki.pl>
> >>
> >> U-Boot stores its setup as environment variables. It's a list of
> >> key-value pairs stored on flash device with a custom header.
> >>
> >> This commit adds an NVMEM driver that:
> >> 1. Provides NVMEM access to environment vars binary data
> >> 2. Extracts variables as NVMEM cells
> >>
> >> It can be used for:
> >> 1. Accessing env variables from user-space
> >> 2. Reading NVMEM cells by Linux drivers
> >>
> >> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>  
> > 
> > Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next, thanks.  
> 
> Hi Miquel,
> 
> Any reason why this nvmem driver is taken via mtd tree?
> 
> This is going to conflict with other nvmem patches that are touching KConfig and Makefile

Sorry I selected it by mistake. I'll let you take it through nvmem
unless there is still something missing on your side?

Anyway, it's now dropped from mtd.

Thanks,
Miquèl

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/2] nvmem: add driver handling U-Boot environment variables

[Srinivas Kandagatla]

On 06/04/2022 15:32, Rafał Miłecki wrote:
> diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
> index 555aa77a574d..17a78b1ba077 100644
> --- a/drivers/nvmem/Kconfig
> +++ b/drivers/nvmem/Kconfig
> @@ -324,4 +324,16 @@ config NVMEM_SUNPLUS_OCOTP
>   	  This driver can also be built as a module. If so, the module
>   	  will be called nvmem-sunplus-ocotp.
>   
> +config NVMEM_U_BOOT_ENV
> +	tristate "U-Boot environment variables support"
> +	depends on ARCH_BCM4908 || COMPILE_TEST

This nvmem provider seems more generic, so why ARCH_BCM4908 dependency here?


--srini
> +	depends on OF && MTD
> +	select CRC32
> +	help
> +	  U-Boot stores its setup as environment variables. This driver adds
> +	  support for verifying & exporting such data. It also exposes variables
> +	  as NVMEM cells so they can be referenced by other drivers.
> +
> +	  If compiled as module it will be called nvmem_u-boot-env.
> +
>   endif

Re: [PATCH 2/2] nvmem: add driver handling U-Boot environment variables

[Srinivas Kandagatla]

On 06/04/2022 15:32, Rafał Miłecki wrote:
> diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
> index 555aa77a574d..17a78b1ba077 100644
> --- a/drivers/nvmem/Kconfig
> +++ b/drivers/nvmem/Kconfig
> @@ -324,4 +324,16 @@ config NVMEM_SUNPLUS_OCOTP
>   	  This driver can also be built as a module. If so, the module
>   	  will be called nvmem-sunplus-ocotp.
>   
> +config NVMEM_U_BOOT_ENV
> +	tristate "U-Boot environment variables support"
> +	depends on ARCH_BCM4908 || COMPILE_TEST

This nvmem provider seems more generic, so why ARCH_BCM4908 dependency here?


--srini
> +	depends on OF && MTD
> +	select CRC32
> +	help
> +	  U-Boot stores its setup as environment variables. This driver adds
> +	  support for verifying & exporting such data. It also exposes variables
> +	  as NVMEM cells so they can be referenced by other drivers.
> +
> +	  If compiled as module it will be called nvmem_u-boot-env.
> +
>   endif

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: [PATCH 2/2] nvmem: add driver handling U-Boot environment variables

[Srinivas Kandagatla]

On 06/04/2022 15:32, Rafał Miłecki wrote:
> diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
> index 555aa77a574d..17a78b1ba077 100644
> --- a/drivers/nvmem/Kconfig
> +++ b/drivers/nvmem/Kconfig
> @@ -324,4 +324,16 @@ config NVMEM_SUNPLUS_OCOTP
>   	  This driver can also be built as a module. If so, the module
>   	  will be called nvmem-sunplus-ocotp.
>   
> +config NVMEM_U_BOOT_ENV
> +	tristate "U-Boot environment variables support"
> +	depends on ARCH_BCM4908 || COMPILE_TEST

This nvmem provider seems more generic, so why ARCH_BCM4908 dependency here?


--srini
> +	depends on OF && MTD
> +	select CRC32
> +	help
> +	  U-Boot stores its setup as environment variables. This driver adds
> +	  support for verifying & exporting such data. It also exposes variables
> +	  as NVMEM cells so they can be referenced by other drivers.
> +
> +	  If compiled as module it will be called nvmem_u-boot-env.
> +
>   endif

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Regression? [PATCH 1/2] mtd: call of_platform_populate() for MTD partitions

[Daniel Golle]

Hi Rafal,
Hi Miguel,


On Mon, Apr 11, 2022 at 11:00:32AM +0200, Miquel Raynal wrote:
> On Wed, 2022-04-06 at 14:32:24 UTC, =?utf-8?b?UmFmYcWCIE1pxYJlY2tp?= wrote:
> > From: Rafał Miłecki <rafal@milecki.pl>
> > 
> > Until this change MTD subsystem supported handling partitions only with
> > MTD partitions parsers. That's a specific / limited API designed around
> > partitions.
> > 
> > Some MTD partitions may however require different handling. They may
> > contain specific data that needs to be parsed and somehow extracted. For
> > that purpose MTD subsystem should allow binding of standard platform
> > drivers.
> > 
> > An example can be U-Boot (sub)partition with environment variables.
> > There exist a "u-boot,env" DT binding for MTD (sub)partition that
> > requires an NVMEM driver.
> > 
> > Ref: 5db1c2dbc04c ("dt-bindings: nvmem: add U-Boot environment variables binding")
> > Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> 
> Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next, thanks.

I'm trying to use next-20220422 and noticed a few new oops'es.
Turns out it could be a problem with this commit according to

[daniel@box linux.git]$ git bisect good
68471517e883902cdff6ea399d043b17f803b1a8 is the first bad commit
commit 68471517e883902cdff6ea399d043b17f803b1a8
Author: Rafał Miłecki <rafal@milecki.pl>
Date:   Wed Apr 6 16:32:24 2022 +0200

    mtd: call of_platform_populate() for MTD partitions
[...]
---

So when ever there is at least one 'compatible' node for any of the
mtd partitions I get the oops messages below. It doesn't really matter
what the compatible string is, "nvmem-cells" as well as "denx,fit"
(used for OpenWrt mtdsplit not even present in linux-next, so just a
dead hint in DTS) make the kernel to oops.

Despite the messages being shown, both accessing MTD partitions and
also eth0 MAC address populated via NVMEM seem to work without
problems (at least looks like it on first sight).

Find the full device tree here:

https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=target/linux/mediatek/dts/mt7622-ubnt-unifi-6-lr-ubootmod.dts

---
[...]
[    0.549448] mtk-spi-nor 11014000.spi: IRQ not available.
[    0.556396] spi-nor spi0.0: w25q512jvq (65536 Kbytes)
[    0.933381] Freeing initrd memory: 2124K
[    0.941567] 7 fixed-partitions partitions found on MTD device spi0.0
[    0.947966] OF: Bad cell count for /spi@11014000/flash@0/partitions
[    0.954286] OF: Bad cell count for /spi@11014000/flash@0/partitions
[    0.960583] ------------[ cut here ]------------
[    0.965192] kobject: '(null)' (0000000097a89bbf): is not initialized, yet kobject_get() is being called.
[    0.974688] WARNING: CPU: 0 PID: 1 at kobject_get+0x68/0x94
[    0.980263] Modules linked in:
[    0.983313] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S                5.18.0-rc1+ #0
[    0.991049] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
[    0.997046] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    1.004000] pc : kobject_get+0x68/0x94
[    1.007743] lr : kobject_get+0x68/0x94
[    1.011484] sp : ffffffc008bdb4a0
[    1.014789] x29: ffffffc008bdb4a0 x28: 0000000000000000 x27: ffffff8005c57810
[    1.021920] x26: ffffff8005c74a20 x25: 0000000000000000 x24: 0000000000000001
[    1.029050] x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000
[    1.036182] x20: ffffff8005c74a20 x19: ffffff8005c74a20 x18: ffffffc008ab9630
[    1.043312] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 0000000000000074
[    1.050443] x14: 000000000000015c x13: 0000000000000074 x12: 00000000ffffffea
[    1.057574] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
[    1.064705] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[    1.071835] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb1c0
[    1.078966] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 000000000000005c
[    1.086097] Call trace:
[    1.088534]  kobject_get+0x68/0x94
[    1.091930]  device_add+0xa4/0x840
[    1.095328]  of_device_add+0x4c/0x5c
[    1.098898]  of_platform_device_create_pdata+0xb8/0xf0
[    1.104029]  of_platform_bus_create+0x104/0x350
[    1.108552]  of_platform_populate+0x54/0xe0
[    1.112728]  parse_mtd_partitions+0x430/0x490
[    1.117080]  mtd_device_parse_register+0x90/0x2b0
[    1.121777]  spi_nor_probe+0x1f8/0x2b0
[    1.125521]  spi_mem_probe+0x68/0xa0
[    1.129092]  spi_probe+0x80/0xdc
[    1.132314]  really_probe.part.0+0x98/0x280
[    1.136490]  __driver_probe_device+0x94/0x140
[    1.140839]  driver_probe_device+0x40/0x114
[    1.145014]  __device_attach_driver+0xb0/0x10c
[    1.149450]  bus_for_each_drv+0x64/0xa0
[    1.153280]  __device_attach+0xa8/0x16c
[    1.157108]  device_initial_probe+0x10/0x20
[    1.161283]  bus_probe_device+0x94/0x9c
[    1.165114]  device_add+0x35c/0x840
[    1.168596]  __spi_add_device+0x70/0x114
[    1.172510]  spi_add_device+0x5c/0x90
[    1.176165]  of_register_spi_device+0x204/0x330
[    1.180688]  spi_register_controller+0x3e8/0x6dc
[    1.185299]  devm_spi_register_controller+0x20/0x74
[    1.190169]  mtk_nor_probe+0x344/0x4c0
[    1.193911]  platform_probe+0x64/0xd0
[    1.197566]  really_probe.part.0+0x98/0x280
[    1.201741]  __driver_probe_device+0x94/0x140
[    1.206089]  driver_probe_device+0x40/0x114
[    1.210264]  __driver_attach+0xf0/0x180
[    1.214092]  bus_for_each_dev+0x5c/0x90
[    1.217922]  driver_attach+0x20/0x2c
[    1.221491]  bus_add_driver+0x140/0x1ec
[    1.225320]  driver_register+0x74/0x120
[    1.229149]  __platform_driver_register+0x24/0x30
[    1.233845]  mtk_nor_driver_init+0x18/0x20
[    1.237938]  do_one_initcall+0x4c/0x1c0
[    1.241768]  kernel_init_freeable+0x230/0x294
[    1.246120]  kernel_init+0x20/0x120
[    1.249601]  ret_from_fork+0x10/0x20
[    1.253170] ---[ end trace 0000000000000000 ]---
[    1.257796] ------------[ cut here ]------------
[    1.262408] refcount_t: addition on 0; use-after-free.
[    1.267550] WARNING: CPU: 0 PID: 1 at refcount_warn_saturate+0x98/0x140
[    1.274161] Modules linked in:
[    1.277206] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S      W         5.18.0-rc1+ #0
[    1.284941] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
[    1.290937] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    1.297891] pc : refcount_warn_saturate+0x98/0x140
[    1.302675] lr : refcount_warn_saturate+0x98/0x140
[    1.307459] sp : ffffffc008bdb490
[    1.310764] x29: ffffffc008bdb490 x28: 0000000000000000 x27: ffffff8005c57810
[    1.317895] x26: ffffff8005c74a20 x25: 0000000000000000 x24: 0000000000000001
[    1.325026] x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000
[    1.332157] x20: ffffff8005c74a20 x19: ffffff8005c74a20 x18: ffffffc008ab9630
[    1.339288] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 00000000000000b3
[    1.346419] x14: 0000000000000219 x13: 00000000000000b3 x12: 00000000ffffffea
[    1.353550] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
[    1.360681] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[    1.367811] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb1b0
[    1.374942] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 000000000000002a
[    1.382073] Call trace:
[    1.384509]  refcount_warn_saturate+0x98/0x140
[    1.388946]  kobject_get+0x90/0x94
[    1.392342]  device_add+0xa4/0x840
[    1.395737]  of_device_add+0x4c/0x5c
[    1.399305]  of_platform_device_create_pdata+0xb8/0xf0
[    1.404436]  of_platform_bus_create+0x104/0x350
[    1.408959]  of_platform_populate+0x54/0xe0
[    1.413134]  parse_mtd_partitions+0x430/0x490
[    1.417484]  mtd_device_parse_register+0x90/0x2b0
[    1.422182]  spi_nor_probe+0x1f8/0x2b0
[    1.425925]  spi_mem_probe+0x68/0xa0
[    1.429493]  spi_probe+0x80/0xdc
[    1.432715]  really_probe.part.0+0x98/0x280
[    1.436890]  __driver_probe_device+0x94/0x140
[    1.441238]  driver_probe_device+0x40/0x114
[    1.445413]  __device_attach_driver+0xb0/0x10c
[    1.449849]  bus_for_each_drv+0x64/0xa0
[    1.453678]  __device_attach+0xa8/0x16c
[    1.457506]  device_initial_probe+0x10/0x20
[    1.461682]  bus_probe_device+0x94/0x9c
[    1.465511]  device_add+0x35c/0x840
[    1.468993]  __spi_add_device+0x70/0x114
[    1.472908]  spi_add_device+0x5c/0x90
[    1.476562]  of_register_spi_device+0x204/0x330
[    1.481085]  spi_register_controller+0x3e8/0x6dc
[    1.485695]  devm_spi_register_controller+0x20/0x74
[    1.490565]  mtk_nor_probe+0x344/0x4c0
[    1.494307]  platform_probe+0x64/0xd0
[    1.497962]  really_probe.part.0+0x98/0x280
[    1.502136]  __driver_probe_device+0x94/0x140
[    1.506485]  driver_probe_device+0x40/0x114
[    1.510660]  __driver_attach+0xf0/0x180
[    1.514488]  bus_for_each_dev+0x5c/0x90
[    1.518317]  driver_attach+0x20/0x2c
[    1.521887]  bus_add_driver+0x140/0x1ec
[    1.525716]  driver_register+0x74/0x120
[    1.529543]  __platform_driver_register+0x24/0x30
[    1.534240]  mtk_nor_driver_init+0x18/0x20
[    1.538330]  do_one_initcall+0x4c/0x1c0
[    1.542158]  kernel_init_freeable+0x230/0x294
[    1.546508]  kernel_init+0x20/0x120
[    1.549990]  ret_from_fork+0x10/0x20
[    1.553558] ---[ end trace 0000000000000000 ]---
[    1.558176] ------------[ cut here ]------------
[    1.562786] kobject: '(null)' (0000000097a89bbf): is not initialized, yet kobject_get() is being called.
[    1.572272] WARNING: CPU: 0 PID: 1 at kobject_get+0x68/0x94
[    1.577839] Modules linked in:
[    1.580885] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S      W         5.18.0-rc1+ #0
[    1.588620] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
[    1.594616] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    1.601570] pc : kobject_get+0x68/0x94
[    1.605312] lr : kobject_get+0x68/0x94
[    1.609054] sp : ffffffc008bdb3a0
[    1.612359] x29: ffffffc008bdb3a0 x28: 0000000000000000 x27: ffffff8005c57810
[    1.619490] x26: ffffff8005c74a20 x25: 0000000000000000 x24: 0000000000000001
[    1.626620] x23: 0000000000000000 x22: 0000000000000000 x21: ffffff8005c74a20
[    1.633751] x20: ffffff8005c57810 x19: ffffff8005c74a20 x18: ffffffc008ab9630
[    1.640882] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 00000000000000f3
[    1.648013] x14: 00000000000002d9 x13: 00000000000000f3 x12: 00000000ffffffea
[    1.655144] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
[    1.662275] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[    1.669405] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb0c0
[    1.676536] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 000000000000005c
[    1.683666] Call trace:
[    1.686102]  kobject_get+0x68/0x94
[    1.689498]  kobject_add_internal+0x34/0x330
[    1.693762]  kobject_add+0x80/0xe0
[    1.697158]  device_add+0xd8/0x840
[    1.700553]  of_device_add+0x4c/0x5c
[    1.704121]  of_platform_device_create_pdata+0xb8/0xf0
[    1.709252]  of_platform_bus_create+0x104/0x350
[    1.713774]  of_platform_populate+0x54/0xe0
[    1.717949]  parse_mtd_partitions+0x430/0x490
[    1.722299]  mtd_device_parse_register+0x90/0x2b0
[    1.726996]  spi_nor_probe+0x1f8/0x2b0
[    1.730739]  spi_mem_probe+0x68/0xa0
[    1.734307]  spi_probe+0x80/0xdc
[    1.737529]  really_probe.part.0+0x98/0x280
[    1.741704]  __driver_probe_device+0x94/0x140
[    1.746053]  driver_probe_device+0x40/0x114
[    1.750228]  __device_attach_driver+0xb0/0x10c
[    1.754664]  bus_for_each_drv+0x64/0xa0
[    1.758493]  __device_attach+0xa8/0x16c
[    1.762320]  device_initial_probe+0x10/0x20
[    1.766496]  bus_probe_device+0x94/0x9c
[    1.770326]  device_add+0x35c/0x840
[    1.773808]  __spi_add_device+0x70/0x114
[    1.777723]  spi_add_device+0x5c/0x90
[    1.781378]  of_register_spi_device+0x204/0x330
[    1.785901]  spi_register_controller+0x3e8/0x6dc
[    1.790511]  devm_spi_register_controller+0x20/0x74
[    1.795381]  mtk_nor_probe+0x344/0x4c0
[    1.799123]  platform_probe+0x64/0xd0
[    1.802777]  really_probe.part.0+0x98/0x280
[    1.806952]  __driver_probe_device+0x94/0x140
[    1.811300]  driver_probe_device+0x40/0x114
[    1.815474]  __driver_attach+0xf0/0x180
[    1.819302]  bus_for_each_dev+0x5c/0x90
[    1.823132]  driver_attach+0x20/0x2c
[    1.826701]  bus_add_driver+0x140/0x1ec
[    1.830530]  driver_register+0x74/0x120
[    1.834359]  __platform_driver_register+0x24/0x30
[    1.839056]  mtk_nor_driver_init+0x18/0x20
[    1.843146]  do_one_initcall+0x4c/0x1c0
[    1.846975]  kernel_init_freeable+0x230/0x294
[    1.851325]  kernel_init+0x20/0x120
[    1.854806]  ret_from_fork+0x10/0x20
[    1.858374] ---[ end trace 0000000000000000 ]---
[    1.862989] ------------[ cut here ]------------
[    1.867596] refcount_t: saturated; leaking memory.
[    1.872392] WARNING: CPU: 0 PID: 1 at refcount_warn_saturate+0x6c/0x140
[    1.879001] Modules linked in:
[    1.882046] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S      W         5.18.0-rc1+ #0
[    1.889781] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
[    1.895776] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    1.902729] pc : refcount_warn_saturate+0x6c/0x140
[    1.907513] lr : refcount_warn_saturate+0x6c/0x140
[    1.912296] sp : ffffffc008bdb390
[    1.915601] x29: ffffffc008bdb390 x28: 0000000000000000 x27: ffffff8005c57810
[    1.922732] x26: ffffff8005c74a20 x25: 0000000000000000 x24: 0000000000000001
[    1.929864] x23: 0000000000000000 x22: 0000000000000000 x21: ffffff8005c74a20
[    1.936995] x20: ffffff8005c57810 x19: ffffff8005c74a20 x18: ffffffc008ab9630
[    1.944127] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 0000000000000134
[    1.951258] x14: 000000000000039c x13: 0000000000000134 x12: 00000000ffffffea
[    1.958389] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
[    1.965520] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[    1.972650] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb0b0
[    1.979780] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 0000000000000026
[    1.986911] Call trace:
[    1.989348]  refcount_warn_saturate+0x6c/0x140
[    1.993786]  kobject_get+0x78/0x94
[    1.997181]  kobject_add_internal+0x34/0x330
[    2.001444]  kobject_add+0x80/0xe0
[    2.004840]  device_add+0xd8/0x840
[    2.008235]  of_device_add+0x4c/0x5c
[    2.011802]  of_platform_device_create_pdata+0xb8/0xf0
[    2.016933]  of_platform_bus_create+0x104/0x350
[    2.021456]  of_platform_populate+0x54/0xe0
[    2.025631]  parse_mtd_partitions+0x430/0x490
[    2.029982]  mtd_device_parse_register+0x90/0x2b0
[    2.034679]  spi_nor_probe+0x1f8/0x2b0
[    2.038421]  spi_mem_probe+0x68/0xa0
[    2.041989]  spi_probe+0x80/0xdc
[    2.045211]  really_probe.part.0+0x98/0x280
[    2.049385]  __driver_probe_device+0x94/0x140
[    2.053734]  driver_probe_device+0x40/0x114
[    2.057908]  __device_attach_driver+0xb0/0x10c
[    2.062344]  bus_for_each_drv+0x64/0xa0
[    2.066174]  __device_attach+0xa8/0x16c
[    2.070002]  device_initial_probe+0x10/0x20
[    2.074177]  bus_probe_device+0x94/0x9c
[    2.078007]  device_add+0x35c/0x840
[    2.081489]  __spi_add_device+0x70/0x114
[    2.085404]  spi_add_device+0x5c/0x90
[    2.089058]  of_register_spi_device+0x204/0x330
[    2.093581]  spi_register_controller+0x3e8/0x6dc
[    2.098191]  devm_spi_register_controller+0x20/0x74
[    2.103062]  mtk_nor_probe+0x344/0x4c0
[    2.106803]  platform_probe+0x64/0xd0
[    2.110458]  really_probe.part.0+0x98/0x280
[    2.114633]  __driver_probe_device+0x94/0x140
[    2.118981]  driver_probe_device+0x40/0x114
[    2.123156]  __driver_attach+0xf0/0x180
[    2.126984]  bus_for_each_dev+0x5c/0x90
[    2.130812]  driver_attach+0x20/0x2c
[    2.134382]  bus_add_driver+0x140/0x1ec
[    2.138212]  driver_register+0x74/0x120
[    2.142039]  __platform_driver_register+0x24/0x30
[    2.146736]  mtk_nor_driver_init+0x18/0x20
[    2.150826]  do_one_initcall+0x4c/0x1c0
[    2.154654]  kernel_init_freeable+0x230/0x294
[    2.159004]  kernel_init+0x20/0x120
[    2.162485]  ret_from_fork+0x10/0x20
[    2.166052] ---[ end trace 0000000000000000 ]---
[    2.170675] ------------[ cut here ]------------
[    2.175282] kobject: '(null)' (0000000097a89bbf): is not initialized, yet kobject_put() is being called.
[    2.184768] WARNING: CPU: 0 PID: 1 at kobject_put+0x68/0xf0
[    2.190335] Modules linked in:
[    2.193381] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S      W         5.18.0-rc1+ #0
[    2.201115] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
[    2.207111] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    2.214065] pc : kobject_put+0x68/0xf0
[    2.217808] lr : kobject_put+0x68/0xf0
[    2.221550] sp : ffffffc008bdb390
[    2.224855] x29: ffffffc008bdb390 x28: 0000000000000000 x27: ffffff8005c57810
[    2.231986] x26: ffffff8005c74a20 x25: 0000000000000000 x24: ffffffc008b55368
[    2.239117] x23: 0000000000000000 x22: 00000000fffffffe x21: ffffff8005c74a20
[    2.246248] x20: ffffff8005c57810 x19: ffffff8005c74a20 x18: ffffffc008ab9630
[    2.253379] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 0000000000000176
[    2.260510] x14: 0000000000000462 x13: 0000000000000176 x12: 00000000ffffffea
[    2.267640] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
[    2.274771] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[    2.281902] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb0b0
[    2.289032] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 000000000000005c
[    2.296163] Call trace:
[    2.298599]  kobject_put+0x68/0xf0
[    2.301995]  kobject_add_internal+0x130/0x330
[    2.306345]  kobject_add+0x80/0xe0
[    2.309740]  device_add+0xd8/0x840
[    2.313135]  of_device_add+0x4c/0x5c
[    2.316702]  of_platform_device_create_pdata+0xb8/0xf0
[    2.321833]  of_platform_bus_create+0x104/0x350
[    2.326356]  of_platform_populate+0x54/0xe0
[    2.330531]  parse_mtd_partitions+0x430/0x490
[    2.334881]  mtd_device_parse_register+0x90/0x2b0
[    2.339578]  spi_nor_probe+0x1f8/0x2b0
[    2.343321]  spi_mem_probe+0x68/0xa0
[    2.346888]  spi_probe+0x80/0xdc
[    2.350110]  really_probe.part.0+0x98/0x280
[    2.354285]  __driver_probe_device+0x94/0x140
[    2.358634]  driver_probe_device+0x40/0x114
[    2.362809]  __device_attach_driver+0xb0/0x10c
[    2.367245]  bus_for_each_drv+0x64/0xa0
[    2.371073]  __device_attach+0xa8/0x16c
[    2.374900]  device_initial_probe+0x10/0x20
[    2.379075]  bus_probe_device+0x94/0x9c
[    2.382906]  device_add+0x35c/0x840
[    2.386388]  __spi_add_device+0x70/0x114
[    2.390303]  spi_add_device+0x5c/0x90
[    2.393958]  of_register_spi_device+0x204/0x330
[    2.398480]  spi_register_controller+0x3e8/0x6dc
[    2.403090]  devm_spi_register_controller+0x20/0x74
[    2.407961]  mtk_nor_probe+0x344/0x4c0
[    2.411702]  platform_probe+0x64/0xd0
[    2.415357]  really_probe.part.0+0x98/0x280
[    2.419532]  __driver_probe_device+0x94/0x140
[    2.423881]  driver_probe_device+0x40/0x114
[    2.428056]  __driver_attach+0xf0/0x180
[    2.431884]  bus_for_each_dev+0x5c/0x90
[    2.435714]  driver_attach+0x20/0x2c
[    2.439283]  bus_add_driver+0x140/0x1ec
[    2.443113]  driver_register+0x74/0x120
[    2.446941]  __platform_driver_register+0x24/0x30
[    2.451638]  mtk_nor_driver_init+0x18/0x20
[    2.455728]  do_one_initcall+0x4c/0x1c0
[    2.459556]  kernel_init_freeable+0x230/0x294
[    2.463906]  kernel_init+0x20/0x120
[    2.467386]  ret_from_fork+0x10/0x20
[    2.470955] ---[ end trace 0000000000000000 ]---
[    2.475571] ------------[ cut here ]------------
[    2.480182] refcount_t: underflow; use-after-free.
[    2.484974] WARNING: CPU: 0 PID: 1 at refcount_warn_saturate+0xec/0x140
[    2.491583] Modules linked in:
[    2.494628] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S      W         5.18.0-rc1+ #0
[    2.502363] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
[    2.508358] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    2.515312] pc : refcount_warn_saturate+0xec/0x140
[    2.520097] lr : refcount_warn_saturate+0xec/0x140
[    2.524881] sp : ffffffc008bdb380
[    2.528186] x29: ffffffc008bdb380 x28: 0000000000000000 x27: ffffff8005c57810
[    2.535317] x26: ffffff8005c74a20 x25: 0000000000000000 x24: ffffffc008b55368
[    2.542448] x23: 0000000000000000 x22: 00000000fffffffe x21: ffffff8005c74a20
[    2.549580] x20: ffffff8005c57810 x19: ffffff8005c74a20 x18: ffffffc008ab9630
[    2.556710] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 00000000000001b7
[    2.563841] x14: 0000000000000525 x13: 00000000000001b7 x12: 00000000ffffffea
[    2.570971] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
[    2.578103] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[    2.585234] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb0a0
[    2.592364] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 0000000000000026
[    2.599494] Call trace:
[    2.601931]  refcount_warn_saturate+0xec/0x140
[    2.606367]  kobject_put+0xe4/0xf0
[    2.609763]  kobject_add_internal+0x130/0x330
[    2.614113]  kobject_add+0x80/0xe0
[    2.617509]  device_add+0xd8/0x840
[    2.620904]  of_device_add+0x4c/0x5c
[    2.624472]  of_platform_device_create_pdata+0xb8/0xf0
[    2.629602]  of_platform_bus_create+0x104/0x350
[    2.634125]  of_platform_populate+0x54/0xe0
[    2.638300]  parse_mtd_partitions+0x430/0x490
[    2.642651]  mtd_device_parse_register+0x90/0x2b0
[    2.647348]  spi_nor_probe+0x1f8/0x2b0
[    2.651091]  spi_mem_probe+0x68/0xa0
[    2.654659]  spi_probe+0x80/0xdc
[    2.657881]  really_probe.part.0+0x98/0x280
[    2.662056]  __driver_probe_device+0x94/0x140
[    2.666404]  driver_probe_device+0x40/0x114
[    2.670579]  __device_attach_driver+0xb0/0x10c
[    2.675015]  bus_for_each_drv+0x64/0xa0
[    2.678844]  __device_attach+0xa8/0x16c
[    2.682672]  device_initial_probe+0x10/0x20
[    2.686847]  bus_probe_device+0x94/0x9c
[    2.690677]  device_add+0x35c/0x840
[    2.694158]  __spi_add_device+0x70/0x114
[    2.698074]  spi_add_device+0x5c/0x90
[    2.701729]  of_register_spi_device+0x204/0x330
[    2.706252]  spi_register_controller+0x3e8/0x6dc
[    2.710861]  devm_spi_register_controller+0x20/0x74
[    2.715731]  mtk_nor_probe+0x344/0x4c0
[    2.719473]  platform_probe+0x64/0xd0
[    2.723128]  really_probe.part.0+0x98/0x280
[    2.727302]  __driver_probe_device+0x94/0x140
[    2.731650]  driver_probe_device+0x40/0x114
[    2.735825]  __driver_attach+0xf0/0x180
[    2.739653]  bus_for_each_dev+0x5c/0x90
[    2.743483]  driver_attach+0x20/0x2c
[    2.747052]  bus_add_driver+0x140/0x1ec
[    2.750881]  driver_register+0x74/0x120
[    2.754709]  __platform_driver_register+0x24/0x30
[    2.759406]  mtk_nor_driver_init+0x18/0x20
[    2.763496]  do_one_initcall+0x4c/0x1c0
[    2.767324]  kernel_init_freeable+0x230/0x294
[    2.771674]  kernel_init+0x20/0x120
[    2.775155]  ret_from_fork+0x10/0x20
[    2.778723] ---[ end trace 0000000000000000 ]---
[    2.783338] kobject_add_internal failed for 11014000.spi:flash@0:partitions:partition@110000 (error: -2 parent: (null))
[    2.794116] ------------[ cut here ]------------
[    2.798723] kobject: '(null)' (0000000097a89bbf): is not initialized, yet kobject_put() is being called.
[    2.808207] WARNING: CPU: 0 PID: 1 at kobject_put+0x68/0xf0
[    2.813776] Modules linked in:
[    2.816821] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S      W         5.18.0-rc1+ #0
[    2.824556] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
[    2.830552] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    2.837506] pc : kobject_put+0x68/0xf0
[    2.841248] lr : kobject_put+0x68/0xf0
[    2.844990] sp : ffffffc008bdb490
[    2.848295] x29: ffffffc008bdb490 x28: 0000000000000000 x27: ffffff8005c57810
[    2.855426] x26: ffffff8005c74a20 x25: 0000000000000000 x24: 0000000000000001
[    2.862557] x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000
[    2.869688] x20: ffffff8005c74a20 x19: ffffff8005c74a20 x18: ffffffc008ab9630
[    2.876819] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 00000000000001fa
[    2.883949] x14: 00000000000005ee x13: 00000000000001fa x12: 00000000ffffffea
[    2.891081] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
[    2.898212] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[    2.905343] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb1b0
[    2.912473] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 000000000000005c
[    2.919604] Call trace:
[    2.922040]  kobject_put+0x68/0xf0
[    2.925436]  device_add+0xfc/0x840
[    2.928832]  of_device_add+0x4c/0x5c
[    2.932400]  of_platform_device_create_pdata+0xb8/0xf0
[    2.937530]  of_platform_bus_create+0x104/0x350
[    2.942053]  of_platform_populate+0x54/0xe0
[    2.946228]  parse_mtd_partitions+0x430/0x490
[    2.950579]  mtd_device_parse_register+0x90/0x2b0
[    2.955276]  spi_nor_probe+0x1f8/0x2b0
[    2.959018]  spi_mem_probe+0x68/0xa0
[    2.962586]  spi_probe+0x80/0xdc
[    2.965808]  really_probe.part.0+0x98/0x280
[    2.969983]  __driver_probe_device+0x94/0x140
[    2.974332]  driver_probe_device+0x40/0x114
[    2.978507]  __device_attach_driver+0xb0/0x10c
[    2.982943]  bus_for_each_drv+0x64/0xa0
[    2.986772]  __device_attach+0xa8/0x16c
[    2.990599]  device_initial_probe+0x10/0x20
[    2.994775]  bus_probe_device+0x94/0x9c
[    2.998605]  device_add+0x35c/0x840
[    3.002087]  __spi_add_device+0x70/0x114
[    3.006002]  spi_add_device+0x5c/0x90
[    3.009656]  of_register_spi_device+0x204/0x330
[    3.014178]  spi_register_controller+0x3e8/0x6dc
[    3.018788]  devm_spi_register_controller+0x20/0x74
[    3.023658]  mtk_nor_probe+0x344/0x4c0
[    3.027400]  platform_probe+0x64/0xd0
[    3.031054]  really_probe.part.0+0x98/0x280
[    3.035230]  __driver_probe_device+0x94/0x140
[    3.039578]  driver_probe_device+0x40/0x114
[    3.043753]  __driver_attach+0xf0/0x180
[    3.047581]  bus_for_each_dev+0x5c/0x90
[    3.051410]  driver_attach+0x20/0x2c
[    3.054980]  bus_add_driver+0x140/0x1ec
[    3.058810]  driver_register+0x74/0x120
[    3.062638]  __platform_driver_register+0x24/0x30
[    3.067335]  mtk_nor_driver_init+0x18/0x20
[    3.071425]  do_one_initcall+0x4c/0x1c0
[    3.075253]  kernel_init_freeable+0x230/0x294
[    3.079604]  kernel_init+0x20/0x120
[    3.083084]  ret_from_fork+0x10/0x20
[    3.086653] ---[ end trace 0000000000000000 ]---
[    3.091298] OF: Bad cell count for /spi@11014000/flash@0/partitions
[    3.097577] OF: Bad cell count for /spi@11014000/flash@0/partitions
[    3.103862] ------------[ cut here ]------------
[    3.108468] kobject: '(null)' (0000000097a89bbf): is not initialized, yet kobject_get() is being called.
[    3.117953] WARNING: CPU: 0 PID: 1 at kobject_get+0x68/0x94
[    3.123521] Modules linked in:
[    3.126566] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S      W         5.18.0-rc1+ #0
[    3.134302] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
[    3.140297] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    3.147251] pc : kobject_get+0x68/0x94
[    3.150994] lr : kobject_get+0x68/0x94
[    3.154736] sp : ffffffc008bdb4a0
[    3.158041] x29: ffffffc008bdb4a0 x28: 0000000000000000 x27: ffffff8005c57810
[    3.165173] x26: ffffff8005c74a20 x25: 0000000000000000 x24: 0000000000000001
[    3.172304] x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000
[    3.179434] x20: ffffff8005c74a20 x19: ffffff8005c74a20 x18: ffffffc008ab9630
[    3.186565] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 000000000000023b
[    3.193696] x14: 00000000000006b1 x13: 000000000000023b x12: 00000000ffffffea
[    3.200826] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
[    3.207957] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[    3.215088] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb1c0
[    3.222218] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 000000000000005c
[    3.229350] Call trace:
[    3.231786]  kobject_get+0x68/0x94
[    3.235182]  device_add+0xa4/0x840
[    3.238578]  of_device_add+0x4c/0x5c
[    3.242145]  of_platform_device_create_pdata+0xb8/0xf0
[    3.247275]  of_platform_bus_create+0x104/0x350
[    3.251798]  of_platform_populate+0x54/0xe0
[    3.255973]  parse_mtd_partitions+0x430/0x490
[    3.260324]  mtd_device_parse_register+0x90/0x2b0
[    3.265022]  spi_nor_probe+0x1f8/0x2b0
[    3.268765]  spi_mem_probe+0x68/0xa0
[    3.272333]  spi_probe+0x80/0xdc
[    3.275555]  really_probe.part.0+0x98/0x280
[    3.279730]  __driver_probe_device+0x94/0x140
[    3.284079]  driver_probe_device+0x40/0x114
[    3.288254]  __device_attach_driver+0xb0/0x10c
[    3.292690]  bus_for_each_drv+0x64/0xa0
[    3.296519]  __device_attach+0xa8/0x16c
[    3.300347]  device_initial_probe+0x10/0x20
[    3.304522]  bus_probe_device+0x94/0x9c
[    3.308351]  device_add+0x35c/0x840
[    3.311833]  __spi_add_device+0x70/0x114
[    3.315749]  spi_add_device+0x5c/0x90
[    3.319404]  of_register_spi_device+0x204/0x330
[    3.323927]  spi_register_controller+0x3e8/0x6dc
[    3.328537]  devm_spi_register_controller+0x20/0x74
[    3.333407]  mtk_nor_probe+0x344/0x4c0
[    3.337149]  platform_probe+0x64/0xd0
[    3.340804]  really_probe.part.0+0x98/0x280
[    3.344978]  __driver_probe_device+0x94/0x140
[    3.349327]  driver_probe_device+0x40/0x114
[    3.353502]  __driver_attach+0xf0/0x180
[    3.357329]  bus_for_each_dev+0x5c/0x90
[    3.361159]  driver_attach+0x20/0x2c
[    3.364728]  bus_add_driver+0x140/0x1ec
[    3.368557]  driver_register+0x74/0x120
[    3.372385]  __platform_driver_register+0x24/0x30
[    3.377081]  mtk_nor_driver_init+0x18/0x20
[    3.381172]  do_one_initcall+0x4c/0x1c0
[    3.385001]  kernel_init_freeable+0x230/0x294
[    3.389351]  kernel_init+0x20/0x120
[    3.392831]  ret_from_fork+0x10/0x20
[    3.396399] ---[ end trace 0000000000000000 ]---
[    3.401017] ------------[ cut here ]------------
[    3.405623] kobject: '(null)' (0000000097a89bbf): is not initialized, yet kobject_get() is being called.
[    3.415108] WARNING: CPU: 0 PID: 1 at kobject_get+0x68/0x94
[    3.420676] Modules linked in:
[    3.423722] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S      W         5.18.0-rc1+ #0
[    3.431456] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
[    3.437452] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    3.444405] pc : kobject_get+0x68/0x94
[    3.448148] lr : kobject_get+0x68/0x94
[    3.451890] sp : ffffffc008bdb3a0
[    3.455194] x29: ffffffc008bdb3a0 x28: 0000000000000000 x27: ffffff8005c57810
[    3.462325] x26: ffffff8005c74a20 x25: 0000000000000000 x24: 0000000000000001
[    3.469456] x23: 0000000000000000 x22: 0000000000000000 x21: ffffff8005c74a20
[    3.476586] x20: ffffff8005c57810 x19: ffffff8005c74a20 x18: ffffffc008ab9630
[    3.483717] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 000000000000027a
[    3.490848] x14: 000000000000076e x13: 000000000000027a x12: 00000000ffffffea
[    3.497979] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
[    3.505109] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[    3.512240] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb0c0
[    3.519372] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 000000000000005c
[    3.526502] Call trace:
[    3.528938]  kobject_get+0x68/0x94
[    3.532334]  kobject_add_internal+0x34/0x330
[    3.536598]  kobject_add+0x80/0xe0
[    3.539994]  device_add+0xd8/0x840
[    3.543389]  of_device_add+0x4c/0x5c
[    3.546957]  of_platform_device_create_pdata+0xb8/0xf0
[    3.552088]  of_platform_bus_create+0x104/0x350
[    3.556611]  of_platform_populate+0x54/0xe0
[    3.560786]  parse_mtd_partitions+0x430/0x490
[    3.565137]  mtd_device_parse_register+0x90/0x2b0
[    3.569835]  spi_nor_probe+0x1f8/0x2b0
[    3.573578]  spi_mem_probe+0x68/0xa0
[    3.577146]  spi_probe+0x80/0xdc
[    3.580368]  really_probe.part.0+0x98/0x280
[    3.584543]  __driver_probe_device+0x94/0x140
[    3.588891]  driver_probe_device+0x40/0x114
[    3.593066]  __device_attach_driver+0xb0/0x10c
[    3.597502]  bus_for_each_drv+0x64/0xa0
[    3.601331]  __device_attach+0xa8/0x16c
[    3.605159]  device_initial_probe+0x10/0x20
[    3.609334]  bus_probe_device+0x94/0x9c
[    3.613164]  device_add+0x35c/0x840
[    3.616646]  __spi_add_device+0x70/0x114
[    3.620561]  spi_add_device+0x5c/0x90
[    3.624215]  of_register_spi_device+0x204/0x330
[    3.628739]  spi_register_controller+0x3e8/0x6dc
[    3.633349]  devm_spi_register_controller+0x20/0x74
[    3.638219]  mtk_nor_probe+0x344/0x4c0
[    3.641961]  platform_probe+0x64/0xd0
[    3.645616]  really_probe.part.0+0x98/0x280
[    3.649791]  __driver_probe_device+0x94/0x140
[    3.654139]  driver_probe_device+0x40/0x114
[    3.658314]  __driver_attach+0xf0/0x180
[    3.662142]  bus_for_each_dev+0x5c/0x90
[    3.665971]  driver_attach+0x20/0x2c
[    3.669540]  bus_add_driver+0x140/0x1ec
[    3.673371]  driver_register+0x74/0x120
[    3.677199]  __platform_driver_register+0x24/0x30
[    3.681895]  mtk_nor_driver_init+0x18/0x20
[    3.685986]  do_one_initcall+0x4c/0x1c0
[    3.689814]  kernel_init_freeable+0x230/0x294
[    3.694164]  kernel_init+0x20/0x120
[    3.697644]  ret_from_fork+0x10/0x20
[    3.701212] ---[ end trace 0000000000000000 ]---
[    3.705829] ------------[ cut here ]------------
[    3.710440] kobject: '(null)' (0000000097a89bbf): is not initialized, yet kobject_put() is being called.
[    3.719924] WARNING: CPU: 0 PID: 1 at kobject_put+0x68/0xf0
[    3.725493] Modules linked in:
[    3.728538] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S      W         5.18.0-rc1+ #0
[    3.736274] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
[    3.742270] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    3.749224] pc : kobject_put+0x68/0xf0
[    3.752966] lr : kobject_put+0x68/0xf0
[    3.756708] sp : ffffffc008bdb390
[    3.760012] x29: ffffffc008bdb390 x28: 0000000000000000 x27: ffffff8005c57810
[    3.767143] x26: ffffff8005c74a20 x25: 0000000000000000 x24: ffffffc008b55368
[    3.774274] x23: 0000000000000000 x22: 00000000fffffffe x21: ffffff8005c74a20
[    3.781406] x20: ffffff8005c57810 x19: ffffff8005c74a20 x18: ffffffc008ab9630
[    3.788536] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 00000000000002bb
[    3.795667] x14: 0000000000000831 x13: 00000000000002bb x12: 00000000ffffffea
[    3.802798] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
[    3.809928] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[    3.817059] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb0b0
[    3.824189] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 000000000000005c
[    3.831321] Call trace:
[    3.833757]  kobject_put+0x68/0xf0
[    3.837153]  kobject_add_internal+0x130/0x330
[    3.841503]  kobject_add+0x80/0xe0
[    3.844899]  device_add+0xd8/0x840
[    3.848294]  of_device_add+0x4c/0x5c
[    3.851861]  of_platform_device_create_pdata+0xb8/0xf0
[    3.856992]  of_platform_bus_create+0x104/0x350
[    3.861515]  of_platform_populate+0x54/0xe0
[    3.865690]  parse_mtd_partitions+0x430/0x490
[    3.870040]  mtd_device_parse_register+0x90/0x2b0
[    3.874737]  spi_nor_probe+0x1f8/0x2b0
[    3.878479]  spi_mem_probe+0x68/0xa0
[    3.882047]  spi_probe+0x80/0xdc
[    3.885269]  really_probe.part.0+0x98/0x280
[    3.889444]  __driver_probe_device+0x94/0x140
[    3.893792]  driver_probe_device+0x40/0x114
[    3.897968]  __device_attach_driver+0xb0/0x10c
[    3.902403]  bus_for_each_drv+0x64/0xa0
[    3.906233]  __device_attach+0xa8/0x16c
[    3.910061]  device_initial_probe+0x10/0x20
[    3.914235]  bus_probe_device+0x94/0x9c
[    3.918065]  device_add+0x35c/0x840
[    3.921547]  __spi_add_device+0x70/0x114
[    3.925461]  spi_add_device+0x5c/0x90
[    3.929116]  of_register_spi_device+0x204/0x330
[    3.933639]  spi_register_controller+0x3e8/0x6dc
[    3.938248]  devm_spi_register_controller+0x20/0x74
[    3.943118]  mtk_nor_probe+0x344/0x4c0
[    3.946860]  platform_probe+0x64/0xd0
[    3.950514]  really_probe.part.0+0x98/0x280
[    3.954689]  __driver_probe_device+0x94/0x140
[    3.959037]  driver_probe_device+0x40/0x114
[    3.963212]  __driver_attach+0xf0/0x180
[    3.967039]  bus_for_each_dev+0x5c/0x90
[    3.970869]  driver_attach+0x20/0x2c
[    3.974438]  bus_add_driver+0x140/0x1ec
[    3.978268]  driver_register+0x74/0x120
[    3.982096]  __platform_driver_register+0x24/0x30
[    3.986792]  mtk_nor_driver_init+0x18/0x20
[    3.990882]  do_one_initcall+0x4c/0x1c0
[    3.994711]  kernel_init_freeable+0x230/0x294
[    3.999061]  kernel_init+0x20/0x120
[    4.002541]  ret_from_fork+0x10/0x20
[    4.006109] ---[ end trace 0000000000000000 ]---
[    4.010725] kobject_add_internal failed for 11014000.spi:flash@0:partitions:partition@1000000 (error: -2 parent: (null))
[    4.021590] ------------[ cut here ]------------
[    4.026196] kobject: '(null)' (0000000097a89bbf): is not initialized, yet kobject_put() is being called.
[    4.035681] WARNING: CPU: 0 PID: 1 at kobject_put+0x68/0xf0
[    4.041248] Modules linked in:
[    4.044294] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S      W         5.18.0-rc1+ #0
[    4.052030] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
[    4.058025] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    4.064979] pc : kobject_put+0x68/0xf0
[    4.068722] lr : kobject_put+0x68/0xf0
[    4.072463] sp : ffffffc008bdb490
[    4.075768] x29: ffffffc008bdb490 x28: 0000000000000000 x27: ffffff8005c57810
[    4.082900] x26: ffffff8005c74a20 x25: 0000000000000000 x24: 0000000000000001
[    4.090031] x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000
[    4.097162] x20: ffffff8005c74a20 x19: ffffff8005c74a20 x18: ffffffc008ab9630
[    4.104293] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 00000000000002fd
[    4.111424] x14: 00000000000008f7 x13: 00000000000002fd x12: 00000000ffffffea
[    4.118554] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
[    4.125685] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[    4.132816] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb1b0
[    4.139946] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 000000000000005c
[    4.147078] Call trace:
[    4.149514]  kobject_put+0x68/0xf0
[    4.152910]  device_add+0xfc/0x840
[    4.156305]  of_device_add+0x4c/0x5c
[    4.159872]  of_platform_device_create_pdata+0xb8/0xf0
[    4.165003]  of_platform_bus_create+0x104/0x350
[    4.169525]  of_platform_populate+0x54/0xe0
[    4.173700]  parse_mtd_partitions+0x430/0x490
[    4.178051]  mtd_device_parse_register+0x90/0x2b0
[    4.182749]  spi_nor_probe+0x1f8/0x2b0
[    4.186491]  spi_mem_probe+0x68/0xa0
[    4.190059]  spi_probe+0x80/0xdc
[    4.193281]  really_probe.part.0+0x98/0x280
[    4.197456]  __driver_probe_device+0x94/0x140
[    4.201804]  driver_probe_device+0x40/0x114
[    4.205979]  __device_attach_driver+0xb0/0x10c
[    4.210414]  bus_for_each_drv+0x64/0xa0
[    4.214244]  __device_attach+0xa8/0x16c
[    4.218072]  device_initial_probe+0x10/0x20
[    4.222248]  bus_probe_device+0x94/0x9c
[    4.226078]  device_add+0x35c/0x840
[    4.229560]  __spi_add_device+0x70/0x114
[    4.233476]  spi_add_device+0x5c/0x90
[    4.237130]  of_register_spi_device+0x204/0x330
[    4.241653]  spi_register_controller+0x3e8/0x6dc
[    4.246262]  devm_spi_register_controller+0x20/0x74
[    4.251132]  mtk_nor_probe+0x344/0x4c0
[    4.254875]  platform_probe+0x64/0xd0
[    4.258529]  really_probe.part.0+0x98/0x280
[    4.262705]  __driver_probe_device+0x94/0x140
[    4.267054]  driver_probe_device+0x40/0x114
[    4.271229]  __driver_attach+0xf0/0x180
[    4.275057]  bus_for_each_dev+0x5c/0x90
[    4.278887]  driver_attach+0x20/0x2c
[    4.282456]  bus_add_driver+0x140/0x1ec
[    4.286286]  driver_register+0x74/0x120
[    4.290113]  __platform_driver_register+0x24/0x30
[    4.294810]  mtk_nor_driver_init+0x18/0x20
[    4.298900]  do_one_initcall+0x4c/0x1c0
[    4.302728]  kernel_init_freeable+0x230/0x294
[    4.307079]  kernel_init+0x20/0x120
[    4.310559]  ret_from_fork+0x10/0x20
[    4.314127] ---[ end trace 0000000000000000 ]---
[    4.318748] Creating 7 MTD partitions on "spi0.0":
[    4.323538] 0x000000000000-0x000000020000 : "bl2"
[    4.328902] 0x000000020000-0x0000000c0000 : "fip"
[    4.334231] 0x0000000c0000-0x0000000d0000 : "u-boot-env"
[    4.340495] 0x0000000d0000-0x000000110000 : "factory"
[    4.346152] 0x000000110000-0x000000120000 : "eeprom"
[    4.352108] 0x000000120000-0x000001000000 : "recovery"
[    4.357862] 0x000001000000-0x000004000000 : "firmware"
[    4.363746] mtk-spi-nor 11014000.spi: spi frequency: 46666653 Hz
[...]
---


Best regards


Daniel

Regression? [PATCH 1/2] mtd: call of_platform_populate() for MTD partitions

[Daniel Golle]

Hi Rafal,
Hi Miguel,


On Mon, Apr 11, 2022 at 11:00:32AM +0200, Miquel Raynal wrote:
> On Wed, 2022-04-06 at 14:32:24 UTC, =?utf-8?b?UmFmYcWCIE1pxYJlY2tp?= wrote:
> > From: Rafał Miłecki <rafal@milecki.pl>
> > 
> > Until this change MTD subsystem supported handling partitions only with
> > MTD partitions parsers. That's a specific / limited API designed around
> > partitions.
> > 
> > Some MTD partitions may however require different handling. They may
> > contain specific data that needs to be parsed and somehow extracted. For
> > that purpose MTD subsystem should allow binding of standard platform
> > drivers.
> > 
> > An example can be U-Boot (sub)partition with environment variables.
> > There exist a "u-boot,env" DT binding for MTD (sub)partition that
> > requires an NVMEM driver.
> > 
> > Ref: 5db1c2dbc04c ("dt-bindings: nvmem: add U-Boot environment variables binding")
> > Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> 
> Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next, thanks.

I'm trying to use next-20220422 and noticed a few new oops'es.
Turns out it could be a problem with this commit according to

[daniel@box linux.git]$ git bisect good
68471517e883902cdff6ea399d043b17f803b1a8 is the first bad commit
commit 68471517e883902cdff6ea399d043b17f803b1a8
Author: Rafał Miłecki <rafal@milecki.pl>
Date:   Wed Apr 6 16:32:24 2022 +0200

    mtd: call of_platform_populate() for MTD partitions
[...]
---

So when ever there is at least one 'compatible' node for any of the
mtd partitions I get the oops messages below. It doesn't really matter
what the compatible string is, "nvmem-cells" as well as "denx,fit"
(used for OpenWrt mtdsplit not even present in linux-next, so just a
dead hint in DTS) make the kernel to oops.

Despite the messages being shown, both accessing MTD partitions and
also eth0 MAC address populated via NVMEM seem to work without
problems (at least looks like it on first sight).

Find the full device tree here:

https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=target/linux/mediatek/dts/mt7622-ubnt-unifi-6-lr-ubootmod.dts

---
[...]
[    0.549448] mtk-spi-nor 11014000.spi: IRQ not available.
[    0.556396] spi-nor spi0.0: w25q512jvq (65536 Kbytes)
[    0.933381] Freeing initrd memory: 2124K
[    0.941567] 7 fixed-partitions partitions found on MTD device spi0.0
[    0.947966] OF: Bad cell count for /spi@11014000/flash@0/partitions
[    0.954286] OF: Bad cell count for /spi@11014000/flash@0/partitions
[    0.960583] ------------[ cut here ]------------
[    0.965192] kobject: '(null)' (0000000097a89bbf): is not initialized, yet kobject_get() is being called.
[    0.974688] WARNING: CPU: 0 PID: 1 at kobject_get+0x68/0x94
[    0.980263] Modules linked in:
[    0.983313] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S                5.18.0-rc1+ #0
[    0.991049] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
[    0.997046] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    1.004000] pc : kobject_get+0x68/0x94
[    1.007743] lr : kobject_get+0x68/0x94
[    1.011484] sp : ffffffc008bdb4a0
[    1.014789] x29: ffffffc008bdb4a0 x28: 0000000000000000 x27: ffffff8005c57810
[    1.021920] x26: ffffff8005c74a20 x25: 0000000000000000 x24: 0000000000000001
[    1.029050] x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000
[    1.036182] x20: ffffff8005c74a20 x19: ffffff8005c74a20 x18: ffffffc008ab9630
[    1.043312] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 0000000000000074
[    1.050443] x14: 000000000000015c x13: 0000000000000074 x12: 00000000ffffffea
[    1.057574] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
[    1.064705] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[    1.071835] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb1c0
[    1.078966] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 000000000000005c
[    1.086097] Call trace:
[    1.088534]  kobject_get+0x68/0x94
[    1.091930]  device_add+0xa4/0x840
[    1.095328]  of_device_add+0x4c/0x5c
[    1.098898]  of_platform_device_create_pdata+0xb8/0xf0
[    1.104029]  of_platform_bus_create+0x104/0x350
[    1.108552]  of_platform_populate+0x54/0xe0
[    1.112728]  parse_mtd_partitions+0x430/0x490
[    1.117080]  mtd_device_parse_register+0x90/0x2b0
[    1.121777]  spi_nor_probe+0x1f8/0x2b0
[    1.125521]  spi_mem_probe+0x68/0xa0
[    1.129092]  spi_probe+0x80/0xdc
[    1.132314]  really_probe.part.0+0x98/0x280
[    1.136490]  __driver_probe_device+0x94/0x140
[    1.140839]  driver_probe_device+0x40/0x114
[    1.145014]  __device_attach_driver+0xb0/0x10c
[    1.149450]  bus_for_each_drv+0x64/0xa0
[    1.153280]  __device_attach+0xa8/0x16c
[    1.157108]  device_initial_probe+0x10/0x20
[    1.161283]  bus_probe_device+0x94/0x9c
[    1.165114]  device_add+0x35c/0x840
[    1.168596]  __spi_add_device+0x70/0x114
[    1.172510]  spi_add_device+0x5c/0x90
[    1.176165]  of_register_spi_device+0x204/0x330
[    1.180688]  spi_register_controller+0x3e8/0x6dc
[    1.185299]  devm_spi_register_controller+0x20/0x74
[    1.190169]  mtk_nor_probe+0x344/0x4c0
[    1.193911]  platform_probe+0x64/0xd0
[    1.197566]  really_probe.part.0+0x98/0x280
[    1.201741]  __driver_probe_device+0x94/0x140
[    1.206089]  driver_probe_device+0x40/0x114
[    1.210264]  __driver_attach+0xf0/0x180
[    1.214092]  bus_for_each_dev+0x5c/0x90
[    1.217922]  driver_attach+0x20/0x2c
[    1.221491]  bus_add_driver+0x140/0x1ec
[    1.225320]  driver_register+0x74/0x120
[    1.229149]  __platform_driver_register+0x24/0x30
[    1.233845]  mtk_nor_driver_init+0x18/0x20
[    1.237938]  do_one_initcall+0x4c/0x1c0
[    1.241768]  kernel_init_freeable+0x230/0x294
[    1.246120]  kernel_init+0x20/0x120
[    1.249601]  ret_from_fork+0x10/0x20
[    1.253170] ---[ end trace 0000000000000000 ]---
[    1.257796] ------------[ cut here ]------------
[    1.262408] refcount_t: addition on 0; use-after-free.
[    1.267550] WARNING: CPU: 0 PID: 1 at refcount_warn_saturate+0x98/0x140
[    1.274161] Modules linked in:
[    1.277206] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S      W         5.18.0-rc1+ #0
[    1.284941] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
[    1.290937] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    1.297891] pc : refcount_warn_saturate+0x98/0x140
[    1.302675] lr : refcount_warn_saturate+0x98/0x140
[    1.307459] sp : ffffffc008bdb490
[    1.310764] x29: ffffffc008bdb490 x28: 0000000000000000 x27: ffffff8005c57810
[    1.317895] x26: ffffff8005c74a20 x25: 0000000000000000 x24: 0000000000000001
[    1.325026] x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000
[    1.332157] x20: ffffff8005c74a20 x19: ffffff8005c74a20 x18: ffffffc008ab9630
[    1.339288] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 00000000000000b3
[    1.346419] x14: 0000000000000219 x13: 00000000000000b3 x12: 00000000ffffffea
[    1.353550] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
[    1.360681] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[    1.367811] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb1b0
[    1.374942] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 000000000000002a
[    1.382073] Call trace:
[    1.384509]  refcount_warn_saturate+0x98/0x140
[    1.388946]  kobject_get+0x90/0x94
[    1.392342]  device_add+0xa4/0x840
[    1.395737]  of_device_add+0x4c/0x5c
[    1.399305]  of_platform_device_create_pdata+0xb8/0xf0
[    1.404436]  of_platform_bus_create+0x104/0x350
[    1.408959]  of_platform_populate+0x54/0xe0
[    1.413134]  parse_mtd_partitions+0x430/0x490
[    1.417484]  mtd_device_parse_register+0x90/0x2b0
[    1.422182]  spi_nor_probe+0x1f8/0x2b0
[    1.425925]  spi_mem_probe+0x68/0xa0
[    1.429493]  spi_probe+0x80/0xdc
[    1.432715]  really_probe.part.0+0x98/0x280
[    1.436890]  __driver_probe_device+0x94/0x140
[    1.441238]  driver_probe_device+0x40/0x114
[    1.445413]  __device_attach_driver+0xb0/0x10c
[    1.449849]  bus_for_each_drv+0x64/0xa0
[    1.453678]  __device_attach+0xa8/0x16c
[    1.457506]  device_initial_probe+0x10/0x20
[    1.461682]  bus_probe_device+0x94/0x9c
[    1.465511]  device_add+0x35c/0x840
[    1.468993]  __spi_add_device+0x70/0x114
[    1.472908]  spi_add_device+0x5c/0x90
[    1.476562]  of_register_spi_device+0x204/0x330
[    1.481085]  spi_register_controller+0x3e8/0x6dc
[    1.485695]  devm_spi_register_controller+0x20/0x74
[    1.490565]  mtk_nor_probe+0x344/0x4c0
[    1.494307]  platform_probe+0x64/0xd0
[    1.497962]  really_probe.part.0+0x98/0x280
[    1.502136]  __driver_probe_device+0x94/0x140
[    1.506485]  driver_probe_device+0x40/0x114
[    1.510660]  __driver_attach+0xf0/0x180
[    1.514488]  bus_for_each_dev+0x5c/0x90
[    1.518317]  driver_attach+0x20/0x2c
[    1.521887]  bus_add_driver+0x140/0x1ec
[    1.525716]  driver_register+0x74/0x120
[    1.529543]  __platform_driver_register+0x24/0x30
[    1.534240]  mtk_nor_driver_init+0x18/0x20
[    1.538330]  do_one_initcall+0x4c/0x1c0
[    1.542158]  kernel_init_freeable+0x230/0x294
[    1.546508]  kernel_init+0x20/0x120
[    1.549990]  ret_from_fork+0x10/0x20
[    1.553558] ---[ end trace 0000000000000000 ]---
[    1.558176] ------------[ cut here ]------------
[    1.562786] kobject: '(null)' (0000000097a89bbf): is not initialized, yet kobject_get() is being called.
[    1.572272] WARNING: CPU: 0 PID: 1 at kobject_get+0x68/0x94
[    1.577839] Modules linked in:
[    1.580885] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S      W         5.18.0-rc1+ #0
[    1.588620] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
[    1.594616] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    1.601570] pc : kobject_get+0x68/0x94
[    1.605312] lr : kobject_get+0x68/0x94
[    1.609054] sp : ffffffc008bdb3a0
[    1.612359] x29: ffffffc008bdb3a0 x28: 0000000000000000 x27: ffffff8005c57810
[    1.619490] x26: ffffff8005c74a20 x25: 0000000000000000 x24: 0000000000000001
[    1.626620] x23: 0000000000000000 x22: 0000000000000000 x21: ffffff8005c74a20
[    1.633751] x20: ffffff8005c57810 x19: ffffff8005c74a20 x18: ffffffc008ab9630
[    1.640882] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 00000000000000f3
[    1.648013] x14: 00000000000002d9 x13: 00000000000000f3 x12: 00000000ffffffea
[    1.655144] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
[    1.662275] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[    1.669405] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb0c0
[    1.676536] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 000000000000005c
[    1.683666] Call trace:
[    1.686102]  kobject_get+0x68/0x94
[    1.689498]  kobject_add_internal+0x34/0x330
[    1.693762]  kobject_add+0x80/0xe0
[    1.697158]  device_add+0xd8/0x840
[    1.700553]  of_device_add+0x4c/0x5c
[    1.704121]  of_platform_device_create_pdata+0xb8/0xf0
[    1.709252]  of_platform_bus_create+0x104/0x350
[    1.713774]  of_platform_populate+0x54/0xe0
[    1.717949]  parse_mtd_partitions+0x430/0x490
[    1.722299]  mtd_device_parse_register+0x90/0x2b0
[    1.726996]  spi_nor_probe+0x1f8/0x2b0
[    1.730739]  spi_mem_probe+0x68/0xa0
[    1.734307]  spi_probe+0x80/0xdc
[    1.737529]  really_probe.part.0+0x98/0x280
[    1.741704]  __driver_probe_device+0x94/0x140
[    1.746053]  driver_probe_device+0x40/0x114
[    1.750228]  __device_attach_driver+0xb0/0x10c
[    1.754664]  bus_for_each_drv+0x64/0xa0
[    1.758493]  __device_attach+0xa8/0x16c
[    1.762320]  device_initial_probe+0x10/0x20
[    1.766496]  bus_probe_device+0x94/0x9c
[    1.770326]  device_add+0x35c/0x840
[    1.773808]  __spi_add_device+0x70/0x114
[    1.777723]  spi_add_device+0x5c/0x90
[    1.781378]  of_register_spi_device+0x204/0x330
[    1.785901]  spi_register_controller+0x3e8/0x6dc
[    1.790511]  devm_spi_register_controller+0x20/0x74
[    1.795381]  mtk_nor_probe+0x344/0x4c0
[    1.799123]  platform_probe+0x64/0xd0
[    1.802777]  really_probe.part.0+0x98/0x280
[    1.806952]  __driver_probe_device+0x94/0x140
[    1.811300]  driver_probe_device+0x40/0x114
[    1.815474]  __driver_attach+0xf0/0x180
[    1.819302]  bus_for_each_dev+0x5c/0x90
[    1.823132]  driver_attach+0x20/0x2c
[    1.826701]  bus_add_driver+0x140/0x1ec
[    1.830530]  driver_register+0x74/0x120
[    1.834359]  __platform_driver_register+0x24/0x30
[    1.839056]  mtk_nor_driver_init+0x18/0x20
[    1.843146]  do_one_initcall+0x4c/0x1c0
[    1.846975]  kernel_init_freeable+0x230/0x294
[    1.851325]  kernel_init+0x20/0x120
[    1.854806]  ret_from_fork+0x10/0x20
[    1.858374] ---[ end trace 0000000000000000 ]---
[    1.862989] ------------[ cut here ]------------
[    1.867596] refcount_t: saturated; leaking memory.
[    1.872392] WARNING: CPU: 0 PID: 1 at refcount_warn_saturate+0x6c/0x140
[    1.879001] Modules linked in:
[    1.882046] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S      W         5.18.0-rc1+ #0
[    1.889781] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
[    1.895776] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    1.902729] pc : refcount_warn_saturate+0x6c/0x140
[    1.907513] lr : refcount_warn_saturate+0x6c/0x140
[    1.912296] sp : ffffffc008bdb390
[    1.915601] x29: ffffffc008bdb390 x28: 0000000000000000 x27: ffffff8005c57810
[    1.922732] x26: ffffff8005c74a20 x25: 0000000000000000 x24: 0000000000000001
[    1.929864] x23: 0000000000000000 x22: 0000000000000000 x21: ffffff8005c74a20
[    1.936995] x20: ffffff8005c57810 x19: ffffff8005c74a20 x18: ffffffc008ab9630
[    1.944127] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 0000000000000134
[    1.951258] x14: 000000000000039c x13: 0000000000000134 x12: 00000000ffffffea
[    1.958389] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
[    1.965520] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[    1.972650] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb0b0
[    1.979780] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 0000000000000026
[    1.986911] Call trace:
[    1.989348]  refcount_warn_saturate+0x6c/0x140
[    1.993786]  kobject_get+0x78/0x94
[    1.997181]  kobject_add_internal+0x34/0x330
[    2.001444]  kobject_add+0x80/0xe0
[    2.004840]  device_add+0xd8/0x840
[    2.008235]  of_device_add+0x4c/0x5c
[    2.011802]  of_platform_device_create_pdata+0xb8/0xf0
[    2.016933]  of_platform_bus_create+0x104/0x350
[    2.021456]  of_platform_populate+0x54/0xe0
[    2.025631]  parse_mtd_partitions+0x430/0x490
[    2.029982]  mtd_device_parse_register+0x90/0x2b0
[    2.034679]  spi_nor_probe+0x1f8/0x2b0
[    2.038421]  spi_mem_probe+0x68/0xa0
[    2.041989]  spi_probe+0x80/0xdc
[    2.045211]  really_probe.part.0+0x98/0x280
[    2.049385]  __driver_probe_device+0x94/0x140
[    2.053734]  driver_probe_device+0x40/0x114
[    2.057908]  __device_attach_driver+0xb0/0x10c
[    2.062344]  bus_for_each_drv+0x64/0xa0
[    2.066174]  __device_attach+0xa8/0x16c
[    2.070002]  device_initial_probe+0x10/0x20
[    2.074177]  bus_probe_device+0x94/0x9c
[    2.078007]  device_add+0x35c/0x840
[    2.081489]  __spi_add_device+0x70/0x114
[    2.085404]  spi_add_device+0x5c/0x90
[    2.089058]  of_register_spi_device+0x204/0x330
[    2.093581]  spi_register_controller+0x3e8/0x6dc
[    2.098191]  devm_spi_register_controller+0x20/0x74
[    2.103062]  mtk_nor_probe+0x344/0x4c0
[    2.106803]  platform_probe+0x64/0xd0
[    2.110458]  really_probe.part.0+0x98/0x280
[    2.114633]  __driver_probe_device+0x94/0x140
[    2.118981]  driver_probe_device+0x40/0x114
[    2.123156]  __driver_attach+0xf0/0x180
[    2.126984]  bus_for_each_dev+0x5c/0x90
[    2.130812]  driver_attach+0x20/0x2c
[    2.134382]  bus_add_driver+0x140/0x1ec
[    2.138212]  driver_register+0x74/0x120
[    2.142039]  __platform_driver_register+0x24/0x30
[    2.146736]  mtk_nor_driver_init+0x18/0x20
[    2.150826]  do_one_initcall+0x4c/0x1c0
[    2.154654]  kernel_init_freeable+0x230/0x294
[    2.159004]  kernel_init+0x20/0x120
[    2.162485]  ret_from_fork+0x10/0x20
[    2.166052] ---[ end trace 0000000000000000 ]---
[    2.170675] ------------[ cut here ]------------
[    2.175282] kobject: '(null)' (0000000097a89bbf): is not initialized, yet kobject_put() is being called.
[    2.184768] WARNING: CPU: 0 PID: 1 at kobject_put+0x68/0xf0
[    2.190335] Modules linked in:
[    2.193381] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S      W         5.18.0-rc1+ #0
[    2.201115] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
[    2.207111] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    2.214065] pc : kobject_put+0x68/0xf0
[    2.217808] lr : kobject_put+0x68/0xf0
[    2.221550] sp : ffffffc008bdb390
[    2.224855] x29: ffffffc008bdb390 x28: 0000000000000000 x27: ffffff8005c57810
[    2.231986] x26: ffffff8005c74a20 x25: 0000000000000000 x24: ffffffc008b55368
[    2.239117] x23: 0000000000000000 x22: 00000000fffffffe x21: ffffff8005c74a20
[    2.246248] x20: ffffff8005c57810 x19: ffffff8005c74a20 x18: ffffffc008ab9630
[    2.253379] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 0000000000000176
[    2.260510] x14: 0000000000000462 x13: 0000000000000176 x12: 00000000ffffffea
[    2.267640] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
[    2.274771] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[    2.281902] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb0b0
[    2.289032] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 000000000000005c
[    2.296163] Call trace:
[    2.298599]  kobject_put+0x68/0xf0
[    2.301995]  kobject_add_internal+0x130/0x330
[    2.306345]  kobject_add+0x80/0xe0
[    2.309740]  device_add+0xd8/0x840
[    2.313135]  of_device_add+0x4c/0x5c
[    2.316702]  of_platform_device_create_pdata+0xb8/0xf0
[    2.321833]  of_platform_bus_create+0x104/0x350
[    2.326356]  of_platform_populate+0x54/0xe0
[    2.330531]  parse_mtd_partitions+0x430/0x490
[    2.334881]  mtd_device_parse_register+0x90/0x2b0
[    2.339578]  spi_nor_probe+0x1f8/0x2b0
[    2.343321]  spi_mem_probe+0x68/0xa0
[    2.346888]  spi_probe+0x80/0xdc
[    2.350110]  really_probe.part.0+0x98/0x280
[    2.354285]  __driver_probe_device+0x94/0x140
[    2.358634]  driver_probe_device+0x40/0x114
[    2.362809]  __device_attach_driver+0xb0/0x10c
[    2.367245]  bus_for_each_drv+0x64/0xa0
[    2.371073]  __device_attach+0xa8/0x16c
[    2.374900]  device_initial_probe+0x10/0x20
[    2.379075]  bus_probe_device+0x94/0x9c
[    2.382906]  device_add+0x35c/0x840
[    2.386388]  __spi_add_device+0x70/0x114
[    2.390303]  spi_add_device+0x5c/0x90
[    2.393958]  of_register_spi_device+0x204/0x330
[    2.398480]  spi_register_controller+0x3e8/0x6dc
[    2.403090]  devm_spi_register_controller+0x20/0x74
[    2.407961]  mtk_nor_probe+0x344/0x4c0
[    2.411702]  platform_probe+0x64/0xd0
[    2.415357]  really_probe.part.0+0x98/0x280
[    2.419532]  __driver_probe_device+0x94/0x140
[    2.423881]  driver_probe_device+0x40/0x114
[    2.428056]  __driver_attach+0xf0/0x180
[    2.431884]  bus_for_each_dev+0x5c/0x90
[    2.435714]  driver_attach+0x20/0x2c
[    2.439283]  bus_add_driver+0x140/0x1ec
[    2.443113]  driver_register+0x74/0x120
[    2.446941]  __platform_driver_register+0x24/0x30
[    2.451638]  mtk_nor_driver_init+0x18/0x20
[    2.455728]  do_one_initcall+0x4c/0x1c0
[    2.459556]  kernel_init_freeable+0x230/0x294
[    2.463906]  kernel_init+0x20/0x120
[    2.467386]  ret_from_fork+0x10/0x20
[    2.470955] ---[ end trace 0000000000000000 ]---
[    2.475571] ------------[ cut here ]------------
[    2.480182] refcount_t: underflow; use-after-free.
[    2.484974] WARNING: CPU: 0 PID: 1 at refcount_warn_saturate+0xec/0x140
[    2.491583] Modules linked in:
[    2.494628] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S      W         5.18.0-rc1+ #0
[    2.502363] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
[    2.508358] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    2.515312] pc : refcount_warn_saturate+0xec/0x140
[    2.520097] lr : refcount_warn_saturate+0xec/0x140
[    2.524881] sp : ffffffc008bdb380
[    2.528186] x29: ffffffc008bdb380 x28: 0000000000000000 x27: ffffff8005c57810
[    2.535317] x26: ffffff8005c74a20 x25: 0000000000000000 x24: ffffffc008b55368
[    2.542448] x23: 0000000000000000 x22: 00000000fffffffe x21: ffffff8005c74a20
[    2.549580] x20: ffffff8005c57810 x19: ffffff8005c74a20 x18: ffffffc008ab9630
[    2.556710] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 00000000000001b7
[    2.563841] x14: 0000000000000525 x13: 00000000000001b7 x12: 00000000ffffffea
[    2.570971] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
[    2.578103] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[    2.585234] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb0a0
[    2.592364] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 0000000000000026
[    2.599494] Call trace:
[    2.601931]  refcount_warn_saturate+0xec/0x140
[    2.606367]  kobject_put+0xe4/0xf0
[    2.609763]  kobject_add_internal+0x130/0x330
[    2.614113]  kobject_add+0x80/0xe0
[    2.617509]  device_add+0xd8/0x840
[    2.620904]  of_device_add+0x4c/0x5c
[    2.624472]  of_platform_device_create_pdata+0xb8/0xf0
[    2.629602]  of_platform_bus_create+0x104/0x350
[    2.634125]  of_platform_populate+0x54/0xe0
[    2.638300]  parse_mtd_partitions+0x430/0x490
[    2.642651]  mtd_device_parse_register+0x90/0x2b0
[    2.647348]  spi_nor_probe+0x1f8/0x2b0
[    2.651091]  spi_mem_probe+0x68/0xa0
[    2.654659]  spi_probe+0x80/0xdc
[    2.657881]  really_probe.part.0+0x98/0x280
[    2.662056]  __driver_probe_device+0x94/0x140
[    2.666404]  driver_probe_device+0x40/0x114
[    2.670579]  __device_attach_driver+0xb0/0x10c
[    2.675015]  bus_for_each_drv+0x64/0xa0
[    2.678844]  __device_attach+0xa8/0x16c
[    2.682672]  device_initial_probe+0x10/0x20
[    2.686847]  bus_probe_device+0x94/0x9c
[    2.690677]  device_add+0x35c/0x840
[    2.694158]  __spi_add_device+0x70/0x114
[    2.698074]  spi_add_device+0x5c/0x90
[    2.701729]  of_register_spi_device+0x204/0x330
[    2.706252]  spi_register_controller+0x3e8/0x6dc
[    2.710861]  devm_spi_register_controller+0x20/0x74
[    2.715731]  mtk_nor_probe+0x344/0x4c0
[    2.719473]  platform_probe+0x64/0xd0
[    2.723128]  really_probe.part.0+0x98/0x280
[    2.727302]  __driver_probe_device+0x94/0x140
[    2.731650]  driver_probe_device+0x40/0x114
[    2.735825]  __driver_attach+0xf0/0x180
[    2.739653]  bus_for_each_dev+0x5c/0x90
[    2.743483]  driver_attach+0x20/0x2c
[    2.747052]  bus_add_driver+0x140/0x1ec
[    2.750881]  driver_register+0x74/0x120
[    2.754709]  __platform_driver_register+0x24/0x30
[    2.759406]  mtk_nor_driver_init+0x18/0x20
[    2.763496]  do_one_initcall+0x4c/0x1c0
[    2.767324]  kernel_init_freeable+0x230/0x294
[    2.771674]  kernel_init+0x20/0x120
[    2.775155]  ret_from_fork+0x10/0x20
[    2.778723] ---[ end trace 0000000000000000 ]---
[    2.783338] kobject_add_internal failed for 11014000.spi:flash@0:partitions:partition@110000 (error: -2 parent: (null))
[    2.794116] ------------[ cut here ]------------
[    2.798723] kobject: '(null)' (0000000097a89bbf): is not initialized, yet kobject_put() is being called.
[    2.808207] WARNING: CPU: 0 PID: 1 at kobject_put+0x68/0xf0
[    2.813776] Modules linked in:
[    2.816821] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S      W         5.18.0-rc1+ #0
[    2.824556] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
[    2.830552] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    2.837506] pc : kobject_put+0x68/0xf0
[    2.841248] lr : kobject_put+0x68/0xf0
[    2.844990] sp : ffffffc008bdb490
[    2.848295] x29: ffffffc008bdb490 x28: 0000000000000000 x27: ffffff8005c57810
[    2.855426] x26: ffffff8005c74a20 x25: 0000000000000000 x24: 0000000000000001
[    2.862557] x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000
[    2.869688] x20: ffffff8005c74a20 x19: ffffff8005c74a20 x18: ffffffc008ab9630
[    2.876819] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 00000000000001fa
[    2.883949] x14: 00000000000005ee x13: 00000000000001fa x12: 00000000ffffffea
[    2.891081] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
[    2.898212] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[    2.905343] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb1b0
[    2.912473] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 000000000000005c
[    2.919604] Call trace:
[    2.922040]  kobject_put+0x68/0xf0
[    2.925436]  device_add+0xfc/0x840
[    2.928832]  of_device_add+0x4c/0x5c
[    2.932400]  of_platform_device_create_pdata+0xb8/0xf0
[    2.937530]  of_platform_bus_create+0x104/0x350
[    2.942053]  of_platform_populate+0x54/0xe0
[    2.946228]  parse_mtd_partitions+0x430/0x490
[    2.950579]  mtd_device_parse_register+0x90/0x2b0
[    2.955276]  spi_nor_probe+0x1f8/0x2b0
[    2.959018]  spi_mem_probe+0x68/0xa0
[    2.962586]  spi_probe+0x80/0xdc
[    2.965808]  really_probe.part.0+0x98/0x280
[    2.969983]  __driver_probe_device+0x94/0x140
[    2.974332]  driver_probe_device+0x40/0x114
[    2.978507]  __device_attach_driver+0xb0/0x10c
[    2.982943]  bus_for_each_drv+0x64/0xa0
[    2.986772]  __device_attach+0xa8/0x16c
[    2.990599]  device_initial_probe+0x10/0x20
[    2.994775]  bus_probe_device+0x94/0x9c
[    2.998605]  device_add+0x35c/0x840
[    3.002087]  __spi_add_device+0x70/0x114
[    3.006002]  spi_add_device+0x5c/0x90
[    3.009656]  of_register_spi_device+0x204/0x330
[    3.014178]  spi_register_controller+0x3e8/0x6dc
[    3.018788]  devm_spi_register_controller+0x20/0x74
[    3.023658]  mtk_nor_probe+0x344/0x4c0
[    3.027400]  platform_probe+0x64/0xd0
[    3.031054]  really_probe.part.0+0x98/0x280
[    3.035230]  __driver_probe_device+0x94/0x140
[    3.039578]  driver_probe_device+0x40/0x114
[    3.043753]  __driver_attach+0xf0/0x180
[    3.047581]  bus_for_each_dev+0x5c/0x90
[    3.051410]  driver_attach+0x20/0x2c
[    3.054980]  bus_add_driver+0x140/0x1ec
[    3.058810]  driver_register+0x74/0x120
[    3.062638]  __platform_driver_register+0x24/0x30
[    3.067335]  mtk_nor_driver_init+0x18/0x20
[    3.071425]  do_one_initcall+0x4c/0x1c0
[    3.075253]  kernel_init_freeable+0x230/0x294
[    3.079604]  kernel_init+0x20/0x120
[    3.083084]  ret_from_fork+0x10/0x20
[    3.086653] ---[ end trace 0000000000000000 ]---
[    3.091298] OF: Bad cell count for /spi@11014000/flash@0/partitions
[    3.097577] OF: Bad cell count for /spi@11014000/flash@0/partitions
[    3.103862] ------------[ cut here ]------------
[    3.108468] kobject: '(null)' (0000000097a89bbf): is not initialized, yet kobject_get() is being called.
[    3.117953] WARNING: CPU: 0 PID: 1 at kobject_get+0x68/0x94
[    3.123521] Modules linked in:
[    3.126566] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S      W         5.18.0-rc1+ #0
[    3.134302] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
[    3.140297] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    3.147251] pc : kobject_get+0x68/0x94
[    3.150994] lr : kobject_get+0x68/0x94
[    3.154736] sp : ffffffc008bdb4a0
[    3.158041] x29: ffffffc008bdb4a0 x28: 0000000000000000 x27: ffffff8005c57810
[    3.165173] x26: ffffff8005c74a20 x25: 0000000000000000 x24: 0000000000000001
[    3.172304] x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000
[    3.179434] x20: ffffff8005c74a20 x19: ffffff8005c74a20 x18: ffffffc008ab9630
[    3.186565] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 000000000000023b
[    3.193696] x14: 00000000000006b1 x13: 000000000000023b x12: 00000000ffffffea
[    3.200826] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
[    3.207957] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[    3.215088] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb1c0
[    3.222218] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 000000000000005c
[    3.229350] Call trace:
[    3.231786]  kobject_get+0x68/0x94
[    3.235182]  device_add+0xa4/0x840
[    3.238578]  of_device_add+0x4c/0x5c
[    3.242145]  of_platform_device_create_pdata+0xb8/0xf0
[    3.247275]  of_platform_bus_create+0x104/0x350
[    3.251798]  of_platform_populate+0x54/0xe0
[    3.255973]  parse_mtd_partitions+0x430/0x490
[    3.260324]  mtd_device_parse_register+0x90/0x2b0
[    3.265022]  spi_nor_probe+0x1f8/0x2b0
[    3.268765]  spi_mem_probe+0x68/0xa0
[    3.272333]  spi_probe+0x80/0xdc
[    3.275555]  really_probe.part.0+0x98/0x280
[    3.279730]  __driver_probe_device+0x94/0x140
[    3.284079]  driver_probe_device+0x40/0x114
[    3.288254]  __device_attach_driver+0xb0/0x10c
[    3.292690]  bus_for_each_drv+0x64/0xa0
[    3.296519]  __device_attach+0xa8/0x16c
[    3.300347]  device_initial_probe+0x10/0x20
[    3.304522]  bus_probe_device+0x94/0x9c
[    3.308351]  device_add+0x35c/0x840
[    3.311833]  __spi_add_device+0x70/0x114
[    3.315749]  spi_add_device+0x5c/0x90
[    3.319404]  of_register_spi_device+0x204/0x330
[    3.323927]  spi_register_controller+0x3e8/0x6dc
[    3.328537]  devm_spi_register_controller+0x20/0x74
[    3.333407]  mtk_nor_probe+0x344/0x4c0
[    3.337149]  platform_probe+0x64/0xd0
[    3.340804]  really_probe.part.0+0x98/0x280
[    3.344978]  __driver_probe_device+0x94/0x140
[    3.349327]  driver_probe_device+0x40/0x114
[    3.353502]  __driver_attach+0xf0/0x180
[    3.357329]  bus_for_each_dev+0x5c/0x90
[    3.361159]  driver_attach+0x20/0x2c
[    3.364728]  bus_add_driver+0x140/0x1ec
[    3.368557]  driver_register+0x74/0x120
[    3.372385]  __platform_driver_register+0x24/0x30
[    3.377081]  mtk_nor_driver_init+0x18/0x20
[    3.381172]  do_one_initcall+0x4c/0x1c0
[    3.385001]  kernel_init_freeable+0x230/0x294
[    3.389351]  kernel_init+0x20/0x120
[    3.392831]  ret_from_fork+0x10/0x20
[    3.396399] ---[ end trace 0000000000000000 ]---
[    3.401017] ------------[ cut here ]------------
[    3.405623] kobject: '(null)' (0000000097a89bbf): is not initialized, yet kobject_get() is being called.
[    3.415108] WARNING: CPU: 0 PID: 1 at kobject_get+0x68/0x94
[    3.420676] Modules linked in:
[    3.423722] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S      W         5.18.0-rc1+ #0
[    3.431456] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
[    3.437452] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    3.444405] pc : kobject_get+0x68/0x94
[    3.448148] lr : kobject_get+0x68/0x94
[    3.451890] sp : ffffffc008bdb3a0
[    3.455194] x29: ffffffc008bdb3a0 x28: 0000000000000000 x27: ffffff8005c57810
[    3.462325] x26: ffffff8005c74a20 x25: 0000000000000000 x24: 0000000000000001
[    3.469456] x23: 0000000000000000 x22: 0000000000000000 x21: ffffff8005c74a20
[    3.476586] x20: ffffff8005c57810 x19: ffffff8005c74a20 x18: ffffffc008ab9630
[    3.483717] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 000000000000027a
[    3.490848] x14: 000000000000076e x13: 000000000000027a x12: 00000000ffffffea
[    3.497979] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
[    3.505109] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[    3.512240] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb0c0
[    3.519372] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 000000000000005c
[    3.526502] Call trace:
[    3.528938]  kobject_get+0x68/0x94
[    3.532334]  kobject_add_internal+0x34/0x330
[    3.536598]  kobject_add+0x80/0xe0
[    3.539994]  device_add+0xd8/0x840
[    3.543389]  of_device_add+0x4c/0x5c
[    3.546957]  of_platform_device_create_pdata+0xb8/0xf0
[    3.552088]  of_platform_bus_create+0x104/0x350
[    3.556611]  of_platform_populate+0x54/0xe0
[    3.560786]  parse_mtd_partitions+0x430/0x490
[    3.565137]  mtd_device_parse_register+0x90/0x2b0
[    3.569835]  spi_nor_probe+0x1f8/0x2b0
[    3.573578]  spi_mem_probe+0x68/0xa0
[    3.577146]  spi_probe+0x80/0xdc
[    3.580368]  really_probe.part.0+0x98/0x280
[    3.584543]  __driver_probe_device+0x94/0x140
[    3.588891]  driver_probe_device+0x40/0x114
[    3.593066]  __device_attach_driver+0xb0/0x10c
[    3.597502]  bus_for_each_drv+0x64/0xa0
[    3.601331]  __device_attach+0xa8/0x16c
[    3.605159]  device_initial_probe+0x10/0x20
[    3.609334]  bus_probe_device+0x94/0x9c
[    3.613164]  device_add+0x35c/0x840
[    3.616646]  __spi_add_device+0x70/0x114
[    3.620561]  spi_add_device+0x5c/0x90
[    3.624215]  of_register_spi_device+0x204/0x330
[    3.628739]  spi_register_controller+0x3e8/0x6dc
[    3.633349]  devm_spi_register_controller+0x20/0x74
[    3.638219]  mtk_nor_probe+0x344/0x4c0
[    3.641961]  platform_probe+0x64/0xd0
[    3.645616]  really_probe.part.0+0x98/0x280
[    3.649791]  __driver_probe_device+0x94/0x140
[    3.654139]  driver_probe_device+0x40/0x114
[    3.658314]  __driver_attach+0xf0/0x180
[    3.662142]  bus_for_each_dev+0x5c/0x90
[    3.665971]  driver_attach+0x20/0x2c
[    3.669540]  bus_add_driver+0x140/0x1ec
[    3.673371]  driver_register+0x74/0x120
[    3.677199]  __platform_driver_register+0x24/0x30
[    3.681895]  mtk_nor_driver_init+0x18/0x20
[    3.685986]  do_one_initcall+0x4c/0x1c0
[    3.689814]  kernel_init_freeable+0x230/0x294
[    3.694164]  kernel_init+0x20/0x120
[    3.697644]  ret_from_fork+0x10/0x20
[    3.701212] ---[ end trace 0000000000000000 ]---
[    3.705829] ------------[ cut here ]------------
[    3.710440] kobject: '(null)' (0000000097a89bbf): is not initialized, yet kobject_put() is being called.
[    3.719924] WARNING: CPU: 0 PID: 1 at kobject_put+0x68/0xf0
[    3.725493] Modules linked in:
[    3.728538] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S      W         5.18.0-rc1+ #0
[    3.736274] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
[    3.742270] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    3.749224] pc : kobject_put+0x68/0xf0
[    3.752966] lr : kobject_put+0x68/0xf0
[    3.756708] sp : ffffffc008bdb390
[    3.760012] x29: ffffffc008bdb390 x28: 0000000000000000 x27: ffffff8005c57810
[    3.767143] x26: ffffff8005c74a20 x25: 0000000000000000 x24: ffffffc008b55368
[    3.774274] x23: 0000000000000000 x22: 00000000fffffffe x21: ffffff8005c74a20
[    3.781406] x20: ffffff8005c57810 x19: ffffff8005c74a20 x18: ffffffc008ab9630
[    3.788536] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 00000000000002bb
[    3.795667] x14: 0000000000000831 x13: 00000000000002bb x12: 00000000ffffffea
[    3.802798] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
[    3.809928] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[    3.817059] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb0b0
[    3.824189] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 000000000000005c
[    3.831321] Call trace:
[    3.833757]  kobject_put+0x68/0xf0
[    3.837153]  kobject_add_internal+0x130/0x330
[    3.841503]  kobject_add+0x80/0xe0
[    3.844899]  device_add+0xd8/0x840
[    3.848294]  of_device_add+0x4c/0x5c
[    3.851861]  of_platform_device_create_pdata+0xb8/0xf0
[    3.856992]  of_platform_bus_create+0x104/0x350
[    3.861515]  of_platform_populate+0x54/0xe0
[    3.865690]  parse_mtd_partitions+0x430/0x490
[    3.870040]  mtd_device_parse_register+0x90/0x2b0
[    3.874737]  spi_nor_probe+0x1f8/0x2b0
[    3.878479]  spi_mem_probe+0x68/0xa0
[    3.882047]  spi_probe+0x80/0xdc
[    3.885269]  really_probe.part.0+0x98/0x280
[    3.889444]  __driver_probe_device+0x94/0x140
[    3.893792]  driver_probe_device+0x40/0x114
[    3.897968]  __device_attach_driver+0xb0/0x10c
[    3.902403]  bus_for_each_drv+0x64/0xa0
[    3.906233]  __device_attach+0xa8/0x16c
[    3.910061]  device_initial_probe+0x10/0x20
[    3.914235]  bus_probe_device+0x94/0x9c
[    3.918065]  device_add+0x35c/0x840
[    3.921547]  __spi_add_device+0x70/0x114
[    3.925461]  spi_add_device+0x5c/0x90
[    3.929116]  of_register_spi_device+0x204/0x330
[    3.933639]  spi_register_controller+0x3e8/0x6dc
[    3.938248]  devm_spi_register_controller+0x20/0x74
[    3.943118]  mtk_nor_probe+0x344/0x4c0
[    3.946860]  platform_probe+0x64/0xd0
[    3.950514]  really_probe.part.0+0x98/0x280
[    3.954689]  __driver_probe_device+0x94/0x140
[    3.959037]  driver_probe_device+0x40/0x114
[    3.963212]  __driver_attach+0xf0/0x180
[    3.967039]  bus_for_each_dev+0x5c/0x90
[    3.970869]  driver_attach+0x20/0x2c
[    3.974438]  bus_add_driver+0x140/0x1ec
[    3.978268]  driver_register+0x74/0x120
[    3.982096]  __platform_driver_register+0x24/0x30
[    3.986792]  mtk_nor_driver_init+0x18/0x20
[    3.990882]  do_one_initcall+0x4c/0x1c0
[    3.994711]  kernel_init_freeable+0x230/0x294
[    3.999061]  kernel_init+0x20/0x120
[    4.002541]  ret_from_fork+0x10/0x20
[    4.006109] ---[ end trace 0000000000000000 ]---
[    4.010725] kobject_add_internal failed for 11014000.spi:flash@0:partitions:partition@1000000 (error: -2 parent: (null))
[    4.021590] ------------[ cut here ]------------
[    4.026196] kobject: '(null)' (0000000097a89bbf): is not initialized, yet kobject_put() is being called.
[    4.035681] WARNING: CPU: 0 PID: 1 at kobject_put+0x68/0xf0
[    4.041248] Modules linked in:
[    4.044294] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S      W         5.18.0-rc1+ #0
[    4.052030] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
[    4.058025] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    4.064979] pc : kobject_put+0x68/0xf0
[    4.068722] lr : kobject_put+0x68/0xf0
[    4.072463] sp : ffffffc008bdb490
[    4.075768] x29: ffffffc008bdb490 x28: 0000000000000000 x27: ffffff8005c57810
[    4.082900] x26: ffffff8005c74a20 x25: 0000000000000000 x24: 0000000000000001
[    4.090031] x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000
[    4.097162] x20: ffffff8005c74a20 x19: ffffff8005c74a20 x18: ffffffc008ab9630
[    4.104293] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 00000000000002fd
[    4.111424] x14: 00000000000008f7 x13: 00000000000002fd x12: 00000000ffffffea
[    4.118554] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
[    4.125685] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[    4.132816] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb1b0
[    4.139946] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 000000000000005c
[    4.147078] Call trace:
[    4.149514]  kobject_put+0x68/0xf0
[    4.152910]  device_add+0xfc/0x840
[    4.156305]  of_device_add+0x4c/0x5c
[    4.159872]  of_platform_device_create_pdata+0xb8/0xf0
[    4.165003]  of_platform_bus_create+0x104/0x350
[    4.169525]  of_platform_populate+0x54/0xe0
[    4.173700]  parse_mtd_partitions+0x430/0x490
[    4.178051]  mtd_device_parse_register+0x90/0x2b0
[    4.182749]  spi_nor_probe+0x1f8/0x2b0
[    4.186491]  spi_mem_probe+0x68/0xa0
[    4.190059]  spi_probe+0x80/0xdc
[    4.193281]  really_probe.part.0+0x98/0x280
[    4.197456]  __driver_probe_device+0x94/0x140
[    4.201804]  driver_probe_device+0x40/0x114
[    4.205979]  __device_attach_driver+0xb0/0x10c
[    4.210414]  bus_for_each_drv+0x64/0xa0
[    4.214244]  __device_attach+0xa8/0x16c
[    4.218072]  device_initial_probe+0x10/0x20
[    4.222248]  bus_probe_device+0x94/0x9c
[    4.226078]  device_add+0x35c/0x840
[    4.229560]  __spi_add_device+0x70/0x114
[    4.233476]  spi_add_device+0x5c/0x90
[    4.237130]  of_register_spi_device+0x204/0x330
[    4.241653]  spi_register_controller+0x3e8/0x6dc
[    4.246262]  devm_spi_register_controller+0x20/0x74
[    4.251132]  mtk_nor_probe+0x344/0x4c0
[    4.254875]  platform_probe+0x64/0xd0
[    4.258529]  really_probe.part.0+0x98/0x280
[    4.262705]  __driver_probe_device+0x94/0x140
[    4.267054]  driver_probe_device+0x40/0x114
[    4.271229]  __driver_attach+0xf0/0x180
[    4.275057]  bus_for_each_dev+0x5c/0x90
[    4.278887]  driver_attach+0x20/0x2c
[    4.282456]  bus_add_driver+0x140/0x1ec
[    4.286286]  driver_register+0x74/0x120
[    4.290113]  __platform_driver_register+0x24/0x30
[    4.294810]  mtk_nor_driver_init+0x18/0x20
[    4.298900]  do_one_initcall+0x4c/0x1c0
[    4.302728]  kernel_init_freeable+0x230/0x294
[    4.307079]  kernel_init+0x20/0x120
[    4.310559]  ret_from_fork+0x10/0x20
[    4.314127] ---[ end trace 0000000000000000 ]---
[    4.318748] Creating 7 MTD partitions on "spi0.0":
[    4.323538] 0x000000000000-0x000000020000 : "bl2"
[    4.328902] 0x000000020000-0x0000000c0000 : "fip"
[    4.334231] 0x0000000c0000-0x0000000d0000 : "u-boot-env"
[    4.340495] 0x0000000d0000-0x000000110000 : "factory"
[    4.346152] 0x000000110000-0x000000120000 : "eeprom"
[    4.352108] 0x000000120000-0x000001000000 : "recovery"
[    4.357862] 0x000001000000-0x000004000000 : "firmware"
[    4.363746] mtk-spi-nor 11014000.spi: spi frequency: 46666653 Hz
[...]
---


Best regards


Daniel

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Regression? [PATCH 1/2] mtd: call of_platform_populate() for MTD partitions

[Daniel Golle]

Hi Rafal,
Hi Miguel,


On Mon, Apr 11, 2022 at 11:00:32AM +0200, Miquel Raynal wrote:
> On Wed, 2022-04-06 at 14:32:24 UTC, =?utf-8?b?UmFmYcWCIE1pxYJlY2tp?= wrote:
> > From: Rafał Miłecki <rafal@milecki.pl>
> > 
> > Until this change MTD subsystem supported handling partitions only with
> > MTD partitions parsers. That's a specific / limited API designed around
> > partitions.
> > 
> > Some MTD partitions may however require different handling. They may
> > contain specific data that needs to be parsed and somehow extracted. For
> > that purpose MTD subsystem should allow binding of standard platform
> > drivers.
> > 
> > An example can be U-Boot (sub)partition with environment variables.
> > There exist a "u-boot,env" DT binding for MTD (sub)partition that
> > requires an NVMEM driver.
> > 
> > Ref: 5db1c2dbc04c ("dt-bindings: nvmem: add U-Boot environment variables binding")
> > Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> 
> Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next, thanks.

I'm trying to use next-20220422 and noticed a few new oops'es.
Turns out it could be a problem with this commit according to

[daniel@box linux.git]$ git bisect good
68471517e883902cdff6ea399d043b17f803b1a8 is the first bad commit
commit 68471517e883902cdff6ea399d043b17f803b1a8
Author: Rafał Miłecki <rafal@milecki.pl>
Date:   Wed Apr 6 16:32:24 2022 +0200

    mtd: call of_platform_populate() for MTD partitions
[...]
---

So when ever there is at least one 'compatible' node for any of the
mtd partitions I get the oops messages below. It doesn't really matter
what the compatible string is, "nvmem-cells" as well as "denx,fit"
(used for OpenWrt mtdsplit not even present in linux-next, so just a
dead hint in DTS) make the kernel to oops.

Despite the messages being shown, both accessing MTD partitions and
also eth0 MAC address populated via NVMEM seem to work without
problems (at least looks like it on first sight).

Find the full device tree here:

https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=target/linux/mediatek/dts/mt7622-ubnt-unifi-6-lr-ubootmod.dts

---
[...]
[    0.549448] mtk-spi-nor 11014000.spi: IRQ not available.
[    0.556396] spi-nor spi0.0: w25q512jvq (65536 Kbytes)
[    0.933381] Freeing initrd memory: 2124K
[    0.941567] 7 fixed-partitions partitions found on MTD device spi0.0
[    0.947966] OF: Bad cell count for /spi@11014000/flash@0/partitions
[    0.954286] OF: Bad cell count for /spi@11014000/flash@0/partitions
[    0.960583] ------------[ cut here ]------------
[    0.965192] kobject: '(null)' (0000000097a89bbf): is not initialized, yet kobject_get() is being called.
[    0.974688] WARNING: CPU: 0 PID: 1 at kobject_get+0x68/0x94
[    0.980263] Modules linked in:
[    0.983313] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S                5.18.0-rc1+ #0
[    0.991049] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
[    0.997046] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    1.004000] pc : kobject_get+0x68/0x94
[    1.007743] lr : kobject_get+0x68/0x94
[    1.011484] sp : ffffffc008bdb4a0
[    1.014789] x29: ffffffc008bdb4a0 x28: 0000000000000000 x27: ffffff8005c57810
[    1.021920] x26: ffffff8005c74a20 x25: 0000000000000000 x24: 0000000000000001
[    1.029050] x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000
[    1.036182] x20: ffffff8005c74a20 x19: ffffff8005c74a20 x18: ffffffc008ab9630
[    1.043312] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 0000000000000074
[    1.050443] x14: 000000000000015c x13: 0000000000000074 x12: 00000000ffffffea
[    1.057574] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
[    1.064705] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[    1.071835] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb1c0
[    1.078966] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 000000000000005c
[    1.086097] Call trace:
[    1.088534]  kobject_get+0x68/0x94
[    1.091930]  device_add+0xa4/0x840
[    1.095328]  of_device_add+0x4c/0x5c
[    1.098898]  of_platform_device_create_pdata+0xb8/0xf0
[    1.104029]  of_platform_bus_create+0x104/0x350
[    1.108552]  of_platform_populate+0x54/0xe0
[    1.112728]  parse_mtd_partitions+0x430/0x490
[    1.117080]  mtd_device_parse_register+0x90/0x2b0
[    1.121777]  spi_nor_probe+0x1f8/0x2b0
[    1.125521]  spi_mem_probe+0x68/0xa0
[    1.129092]  spi_probe+0x80/0xdc
[    1.132314]  really_probe.part.0+0x98/0x280
[    1.136490]  __driver_probe_device+0x94/0x140
[    1.140839]  driver_probe_device+0x40/0x114
[    1.145014]  __device_attach_driver+0xb0/0x10c
[    1.149450]  bus_for_each_drv+0x64/0xa0
[    1.153280]  __device_attach+0xa8/0x16c
[    1.157108]  device_initial_probe+0x10/0x20
[    1.161283]  bus_probe_device+0x94/0x9c
[    1.165114]  device_add+0x35c/0x840
[    1.168596]  __spi_add_device+0x70/0x114
[    1.172510]  spi_add_device+0x5c/0x90
[    1.176165]  of_register_spi_device+0x204/0x330
[    1.180688]  spi_register_controller+0x3e8/0x6dc
[    1.185299]  devm_spi_register_controller+0x20/0x74
[    1.190169]  mtk_nor_probe+0x344/0x4c0
[    1.193911]  platform_probe+0x64/0xd0
[    1.197566]  really_probe.part.0+0x98/0x280
[    1.201741]  __driver_probe_device+0x94/0x140
[    1.206089]  driver_probe_device+0x40/0x114
[    1.210264]  __driver_attach+0xf0/0x180
[    1.214092]  bus_for_each_dev+0x5c/0x90
[    1.217922]  driver_attach+0x20/0x2c
[    1.221491]  bus_add_driver+0x140/0x1ec
[    1.225320]  driver_register+0x74/0x120
[    1.229149]  __platform_driver_register+0x24/0x30
[    1.233845]  mtk_nor_driver_init+0x18/0x20
[    1.237938]  do_one_initcall+0x4c/0x1c0
[    1.241768]  kernel_init_freeable+0x230/0x294
[    1.246120]  kernel_init+0x20/0x120
[    1.249601]  ret_from_fork+0x10/0x20
[    1.253170] ---[ end trace 0000000000000000 ]---
[    1.257796] ------------[ cut here ]------------
[    1.262408] refcount_t: addition on 0; use-after-free.
[    1.267550] WARNING: CPU: 0 PID: 1 at refcount_warn_saturate+0x98/0x140
[    1.274161] Modules linked in:
[    1.277206] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S      W         5.18.0-rc1+ #0
[    1.284941] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
[    1.290937] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    1.297891] pc : refcount_warn_saturate+0x98/0x140
[    1.302675] lr : refcount_warn_saturate+0x98/0x140
[    1.307459] sp : ffffffc008bdb490
[    1.310764] x29: ffffffc008bdb490 x28: 0000000000000000 x27: ffffff8005c57810
[    1.317895] x26: ffffff8005c74a20 x25: 0000000000000000 x24: 0000000000000001
[    1.325026] x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000
[    1.332157] x20: ffffff8005c74a20 x19: ffffff8005c74a20 x18: ffffffc008ab9630
[    1.339288] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 00000000000000b3
[    1.346419] x14: 0000000000000219 x13: 00000000000000b3 x12: 00000000ffffffea
[    1.353550] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
[    1.360681] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[    1.367811] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb1b0
[    1.374942] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 000000000000002a
[    1.382073] Call trace:
[    1.384509]  refcount_warn_saturate+0x98/0x140
[    1.388946]  kobject_get+0x90/0x94
[    1.392342]  device_add+0xa4/0x840
[    1.395737]  of_device_add+0x4c/0x5c
[    1.399305]  of_platform_device_create_pdata+0xb8/0xf0
[    1.404436]  of_platform_bus_create+0x104/0x350
[    1.408959]  of_platform_populate+0x54/0xe0
[    1.413134]  parse_mtd_partitions+0x430/0x490
[    1.417484]  mtd_device_parse_register+0x90/0x2b0
[    1.422182]  spi_nor_probe+0x1f8/0x2b0
[    1.425925]  spi_mem_probe+0x68/0xa0
[    1.429493]  spi_probe+0x80/0xdc
[    1.432715]  really_probe.part.0+0x98/0x280
[    1.436890]  __driver_probe_device+0x94/0x140
[    1.441238]  driver_probe_device+0x40/0x114
[    1.445413]  __device_attach_driver+0xb0/0x10c
[    1.449849]  bus_for_each_drv+0x64/0xa0
[    1.453678]  __device_attach+0xa8/0x16c
[    1.457506]  device_initial_probe+0x10/0x20
[    1.461682]  bus_probe_device+0x94/0x9c
[    1.465511]  device_add+0x35c/0x840
[    1.468993]  __spi_add_device+0x70/0x114
[    1.472908]  spi_add_device+0x5c/0x90
[    1.476562]  of_register_spi_device+0x204/0x330
[    1.481085]  spi_register_controller+0x3e8/0x6dc
[    1.485695]  devm_spi_register_controller+0x20/0x74
[    1.490565]  mtk_nor_probe+0x344/0x4c0
[    1.494307]  platform_probe+0x64/0xd0
[    1.497962]  really_probe.part.0+0x98/0x280
[    1.502136]  __driver_probe_device+0x94/0x140
[    1.506485]  driver_probe_device+0x40/0x114
[    1.510660]  __driver_attach+0xf0/0x180
[    1.514488]  bus_for_each_dev+0x5c/0x90
[    1.518317]  driver_attach+0x20/0x2c
[    1.521887]  bus_add_driver+0x140/0x1ec
[    1.525716]  driver_register+0x74/0x120
[    1.529543]  __platform_driver_register+0x24/0x30
[    1.534240]  mtk_nor_driver_init+0x18/0x20
[    1.538330]  do_one_initcall+0x4c/0x1c0
[    1.542158]  kernel_init_freeable+0x230/0x294
[    1.546508]  kernel_init+0x20/0x120
[    1.549990]  ret_from_fork+0x10/0x20
[    1.553558] ---[ end trace 0000000000000000 ]---
[    1.558176] ------------[ cut here ]------------
[    1.562786] kobject: '(null)' (0000000097a89bbf): is not initialized, yet kobject_get() is being called.
[    1.572272] WARNING: CPU: 0 PID: 1 at kobject_get+0x68/0x94
[    1.577839] Modules linked in:
[    1.580885] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S      W         5.18.0-rc1+ #0
[    1.588620] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
[    1.594616] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    1.601570] pc : kobject_get+0x68/0x94
[    1.605312] lr : kobject_get+0x68/0x94
[    1.609054] sp : ffffffc008bdb3a0
[    1.612359] x29: ffffffc008bdb3a0 x28: 0000000000000000 x27: ffffff8005c57810
[    1.619490] x26: ffffff8005c74a20 x25: 0000000000000000 x24: 0000000000000001
[    1.626620] x23: 0000000000000000 x22: 0000000000000000 x21: ffffff8005c74a20
[    1.633751] x20: ffffff8005c57810 x19: ffffff8005c74a20 x18: ffffffc008ab9630
[    1.640882] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 00000000000000f3
[    1.648013] x14: 00000000000002d9 x13: 00000000000000f3 x12: 00000000ffffffea
[    1.655144] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
[    1.662275] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[    1.669405] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb0c0
[    1.676536] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 000000000000005c
[    1.683666] Call trace:
[    1.686102]  kobject_get+0x68/0x94
[    1.689498]  kobject_add_internal+0x34/0x330
[    1.693762]  kobject_add+0x80/0xe0
[    1.697158]  device_add+0xd8/0x840
[    1.700553]  of_device_add+0x4c/0x5c
[    1.704121]  of_platform_device_create_pdata+0xb8/0xf0
[    1.709252]  of_platform_bus_create+0x104/0x350
[    1.713774]  of_platform_populate+0x54/0xe0
[    1.717949]  parse_mtd_partitions+0x430/0x490
[    1.722299]  mtd_device_parse_register+0x90/0x2b0
[    1.726996]  spi_nor_probe+0x1f8/0x2b0
[    1.730739]  spi_mem_probe+0x68/0xa0
[    1.734307]  spi_probe+0x80/0xdc
[    1.737529]  really_probe.part.0+0x98/0x280
[    1.741704]  __driver_probe_device+0x94/0x140
[    1.746053]  driver_probe_device+0x40/0x114
[    1.750228]  __device_attach_driver+0xb0/0x10c
[    1.754664]  bus_for_each_drv+0x64/0xa0
[    1.758493]  __device_attach+0xa8/0x16c
[    1.762320]  device_initial_probe+0x10/0x20
[    1.766496]  bus_probe_device+0x94/0x9c
[    1.770326]  device_add+0x35c/0x840
[    1.773808]  __spi_add_device+0x70/0x114
[    1.777723]  spi_add_device+0x5c/0x90
[    1.781378]  of_register_spi_device+0x204/0x330
[    1.785901]  spi_register_controller+0x3e8/0x6dc
[    1.790511]  devm_spi_register_controller+0x20/0x74
[    1.795381]  mtk_nor_probe+0x344/0x4c0
[    1.799123]  platform_probe+0x64/0xd0
[    1.802777]  really_probe.part.0+0x98/0x280
[    1.806952]  __driver_probe_device+0x94/0x140
[    1.811300]  driver_probe_device+0x40/0x114
[    1.815474]  __driver_attach+0xf0/0x180
[    1.819302]  bus_for_each_dev+0x5c/0x90
[    1.823132]  driver_attach+0x20/0x2c
[    1.826701]  bus_add_driver+0x140/0x1ec
[    1.830530]  driver_register+0x74/0x120
[    1.834359]  __platform_driver_register+0x24/0x30
[    1.839056]  mtk_nor_driver_init+0x18/0x20
[    1.843146]  do_one_initcall+0x4c/0x1c0
[    1.846975]  kernel_init_freeable+0x230/0x294
[    1.851325]  kernel_init+0x20/0x120
[    1.854806]  ret_from_fork+0x10/0x20
[    1.858374] ---[ end trace 0000000000000000 ]---
[    1.862989] ------------[ cut here ]------------
[    1.867596] refcount_t: saturated; leaking memory.
[    1.872392] WARNING: CPU: 0 PID: 1 at refcount_warn_saturate+0x6c/0x140
[    1.879001] Modules linked in:
[    1.882046] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S      W         5.18.0-rc1+ #0
[    1.889781] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
[    1.895776] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    1.902729] pc : refcount_warn_saturate+0x6c/0x140
[    1.907513] lr : refcount_warn_saturate+0x6c/0x140
[    1.912296] sp : ffffffc008bdb390
[    1.915601] x29: ffffffc008bdb390 x28: 0000000000000000 x27: ffffff8005c57810
[    1.922732] x26: ffffff8005c74a20 x25: 0000000000000000 x24: 0000000000000001
[    1.929864] x23: 0000000000000000 x22: 0000000000000000 x21: ffffff8005c74a20
[    1.936995] x20: ffffff8005c57810 x19: ffffff8005c74a20 x18: ffffffc008ab9630
[    1.944127] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 0000000000000134
[    1.951258] x14: 000000000000039c x13: 0000000000000134 x12: 00000000ffffffea
[    1.958389] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
[    1.965520] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[    1.972650] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb0b0
[    1.979780] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 0000000000000026
[    1.986911] Call trace:
[    1.989348]  refcount_warn_saturate+0x6c/0x140
[    1.993786]  kobject_get+0x78/0x94
[    1.997181]  kobject_add_internal+0x34/0x330
[    2.001444]  kobject_add+0x80/0xe0
[    2.004840]  device_add+0xd8/0x840
[    2.008235]  of_device_add+0x4c/0x5c
[    2.011802]  of_platform_device_create_pdata+0xb8/0xf0
[    2.016933]  of_platform_bus_create+0x104/0x350
[    2.021456]  of_platform_populate+0x54/0xe0
[    2.025631]  parse_mtd_partitions+0x430/0x490
[    2.029982]  mtd_device_parse_register+0x90/0x2b0
[    2.034679]  spi_nor_probe+0x1f8/0x2b0
[    2.038421]  spi_mem_probe+0x68/0xa0
[    2.041989]  spi_probe+0x80/0xdc
[    2.045211]  really_probe.part.0+0x98/0x280
[    2.049385]  __driver_probe_device+0x94/0x140
[    2.053734]  driver_probe_device+0x40/0x114
[    2.057908]  __device_attach_driver+0xb0/0x10c
[    2.062344]  bus_for_each_drv+0x64/0xa0
[    2.066174]  __device_attach+0xa8/0x16c
[    2.070002]  device_initial_probe+0x10/0x20
[    2.074177]  bus_probe_device+0x94/0x9c
[    2.078007]  device_add+0x35c/0x840
[    2.081489]  __spi_add_device+0x70/0x114
[    2.085404]  spi_add_device+0x5c/0x90
[    2.089058]  of_register_spi_device+0x204/0x330
[    2.093581]  spi_register_controller+0x3e8/0x6dc
[    2.098191]  devm_spi_register_controller+0x20/0x74
[    2.103062]  mtk_nor_probe+0x344/0x4c0
[    2.106803]  platform_probe+0x64/0xd0
[    2.110458]  really_probe.part.0+0x98/0x280
[    2.114633]  __driver_probe_device+0x94/0x140
[    2.118981]  driver_probe_device+0x40/0x114
[    2.123156]  __driver_attach+0xf0/0x180
[    2.126984]  bus_for_each_dev+0x5c/0x90
[    2.130812]  driver_attach+0x20/0x2c
[    2.134382]  bus_add_driver+0x140/0x1ec
[    2.138212]  driver_register+0x74/0x120
[    2.142039]  __platform_driver_register+0x24/0x30
[    2.146736]  mtk_nor_driver_init+0x18/0x20
[    2.150826]  do_one_initcall+0x4c/0x1c0
[    2.154654]  kernel_init_freeable+0x230/0x294
[    2.159004]  kernel_init+0x20/0x120
[    2.162485]  ret_from_fork+0x10/0x20
[    2.166052] ---[ end trace 0000000000000000 ]---
[    2.170675] ------------[ cut here ]------------
[    2.175282] kobject: '(null)' (0000000097a89bbf): is not initialized, yet kobject_put() is being called.
[    2.184768] WARNING: CPU: 0 PID: 1 at kobject_put+0x68/0xf0
[    2.190335] Modules linked in:
[    2.193381] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S      W         5.18.0-rc1+ #0
[    2.201115] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
[    2.207111] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    2.214065] pc : kobject_put+0x68/0xf0
[    2.217808] lr : kobject_put+0x68/0xf0
[    2.221550] sp : ffffffc008bdb390
[    2.224855] x29: ffffffc008bdb390 x28: 0000000000000000 x27: ffffff8005c57810
[    2.231986] x26: ffffff8005c74a20 x25: 0000000000000000 x24: ffffffc008b55368
[    2.239117] x23: 0000000000000000 x22: 00000000fffffffe x21: ffffff8005c74a20
[    2.246248] x20: ffffff8005c57810 x19: ffffff8005c74a20 x18: ffffffc008ab9630
[    2.253379] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 0000000000000176
[    2.260510] x14: 0000000000000462 x13: 0000000000000176 x12: 00000000ffffffea
[    2.267640] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
[    2.274771] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[    2.281902] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb0b0
[    2.289032] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 000000000000005c
[    2.296163] Call trace:
[    2.298599]  kobject_put+0x68/0xf0
[    2.301995]  kobject_add_internal+0x130/0x330
[    2.306345]  kobject_add+0x80/0xe0
[    2.309740]  device_add+0xd8/0x840
[    2.313135]  of_device_add+0x4c/0x5c
[    2.316702]  of_platform_device_create_pdata+0xb8/0xf0
[    2.321833]  of_platform_bus_create+0x104/0x350
[    2.326356]  of_platform_populate+0x54/0xe0
[    2.330531]  parse_mtd_partitions+0x430/0x490
[    2.334881]  mtd_device_parse_register+0x90/0x2b0
[    2.339578]  spi_nor_probe+0x1f8/0x2b0
[    2.343321]  spi_mem_probe+0x68/0xa0
[    2.346888]  spi_probe+0x80/0xdc
[    2.350110]  really_probe.part.0+0x98/0x280
[    2.354285]  __driver_probe_device+0x94/0x140
[    2.358634]  driver_probe_device+0x40/0x114
[    2.362809]  __device_attach_driver+0xb0/0x10c
[    2.367245]  bus_for_each_drv+0x64/0xa0
[    2.371073]  __device_attach+0xa8/0x16c
[    2.374900]  device_initial_probe+0x10/0x20
[    2.379075]  bus_probe_device+0x94/0x9c
[    2.382906]  device_add+0x35c/0x840
[    2.386388]  __spi_add_device+0x70/0x114
[    2.390303]  spi_add_device+0x5c/0x90
[    2.393958]  of_register_spi_device+0x204/0x330
[    2.398480]  spi_register_controller+0x3e8/0x6dc
[    2.403090]  devm_spi_register_controller+0x20/0x74
[    2.407961]  mtk_nor_probe+0x344/0x4c0
[    2.411702]  platform_probe+0x64/0xd0
[    2.415357]  really_probe.part.0+0x98/0x280
[    2.419532]  __driver_probe_device+0x94/0x140
[    2.423881]  driver_probe_device+0x40/0x114
[    2.428056]  __driver_attach+0xf0/0x180
[    2.431884]  bus_for_each_dev+0x5c/0x90
[    2.435714]  driver_attach+0x20/0x2c
[    2.439283]  bus_add_driver+0x140/0x1ec
[    2.443113]  driver_register+0x74/0x120
[    2.446941]  __platform_driver_register+0x24/0x30
[    2.451638]  mtk_nor_driver_init+0x18/0x20
[    2.455728]  do_one_initcall+0x4c/0x1c0
[    2.459556]  kernel_init_freeable+0x230/0x294
[    2.463906]  kernel_init+0x20/0x120
[    2.467386]  ret_from_fork+0x10/0x20
[    2.470955] ---[ end trace 0000000000000000 ]---
[    2.475571] ------------[ cut here ]------------
[    2.480182] refcount_t: underflow; use-after-free.
[    2.484974] WARNING: CPU: 0 PID: 1 at refcount_warn_saturate+0xec/0x140
[    2.491583] Modules linked in:
[    2.494628] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S      W         5.18.0-rc1+ #0
[    2.502363] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
[    2.508358] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    2.515312] pc : refcount_warn_saturate+0xec/0x140
[    2.520097] lr : refcount_warn_saturate+0xec/0x140
[    2.524881] sp : ffffffc008bdb380
[    2.528186] x29: ffffffc008bdb380 x28: 0000000000000000 x27: ffffff8005c57810
[    2.535317] x26: ffffff8005c74a20 x25: 0000000000000000 x24: ffffffc008b55368
[    2.542448] x23: 0000000000000000 x22: 00000000fffffffe x21: ffffff8005c74a20
[    2.549580] x20: ffffff8005c57810 x19: ffffff8005c74a20 x18: ffffffc008ab9630
[    2.556710] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 00000000000001b7
[    2.563841] x14: 0000000000000525 x13: 00000000000001b7 x12: 00000000ffffffea
[    2.570971] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
[    2.578103] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[    2.585234] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb0a0
[    2.592364] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 0000000000000026
[    2.599494] Call trace:
[    2.601931]  refcount_warn_saturate+0xec/0x140
[    2.606367]  kobject_put+0xe4/0xf0
[    2.609763]  kobject_add_internal+0x130/0x330
[    2.614113]  kobject_add+0x80/0xe0
[    2.617509]  device_add+0xd8/0x840
[    2.620904]  of_device_add+0x4c/0x5c
[    2.624472]  of_platform_device_create_pdata+0xb8/0xf0
[    2.629602]  of_platform_bus_create+0x104/0x350
[    2.634125]  of_platform_populate+0x54/0xe0
[    2.638300]  parse_mtd_partitions+0x430/0x490
[    2.642651]  mtd_device_parse_register+0x90/0x2b0
[    2.647348]  spi_nor_probe+0x1f8/0x2b0
[    2.651091]  spi_mem_probe+0x68/0xa0
[    2.654659]  spi_probe+0x80/0xdc
[    2.657881]  really_probe.part.0+0x98/0x280
[    2.662056]  __driver_probe_device+0x94/0x140
[    2.666404]  driver_probe_device+0x40/0x114
[    2.670579]  __device_attach_driver+0xb0/0x10c
[    2.675015]  bus_for_each_drv+0x64/0xa0
[    2.678844]  __device_attach+0xa8/0x16c
[    2.682672]  device_initial_probe+0x10/0x20
[    2.686847]  bus_probe_device+0x94/0x9c
[    2.690677]  device_add+0x35c/0x840
[    2.694158]  __spi_add_device+0x70/0x114
[    2.698074]  spi_add_device+0x5c/0x90
[    2.701729]  of_register_spi_device+0x204/0x330
[    2.706252]  spi_register_controller+0x3e8/0x6dc
[    2.710861]  devm_spi_register_controller+0x20/0x74
[    2.715731]  mtk_nor_probe+0x344/0x4c0
[    2.719473]  platform_probe+0x64/0xd0
[    2.723128]  really_probe.part.0+0x98/0x280
[    2.727302]  __driver_probe_device+0x94/0x140
[    2.731650]  driver_probe_device+0x40/0x114
[    2.735825]  __driver_attach+0xf0/0x180
[    2.739653]  bus_for_each_dev+0x5c/0x90
[    2.743483]  driver_attach+0x20/0x2c
[    2.747052]  bus_add_driver+0x140/0x1ec
[    2.750881]  driver_register+0x74/0x120
[    2.754709]  __platform_driver_register+0x24/0x30
[    2.759406]  mtk_nor_driver_init+0x18/0x20
[    2.763496]  do_one_initcall+0x4c/0x1c0
[    2.767324]  kernel_init_freeable+0x230/0x294
[    2.771674]  kernel_init+0x20/0x120
[    2.775155]  ret_from_fork+0x10/0x20
[    2.778723] ---[ end trace 0000000000000000 ]---
[    2.783338] kobject_add_internal failed for 11014000.spi:flash@0:partitions:partition@110000 (error: -2 parent: (null))
[    2.794116] ------------[ cut here ]------------
[    2.798723] kobject: '(null)' (0000000097a89bbf): is not initialized, yet kobject_put() is being called.
[    2.808207] WARNING: CPU: 0 PID: 1 at kobject_put+0x68/0xf0
[    2.813776] Modules linked in:
[    2.816821] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S      W         5.18.0-rc1+ #0
[    2.824556] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
[    2.830552] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    2.837506] pc : kobject_put+0x68/0xf0
[    2.841248] lr : kobject_put+0x68/0xf0
[    2.844990] sp : ffffffc008bdb490
[    2.848295] x29: ffffffc008bdb490 x28: 0000000000000000 x27: ffffff8005c57810
[    2.855426] x26: ffffff8005c74a20 x25: 0000000000000000 x24: 0000000000000001
[    2.862557] x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000
[    2.869688] x20: ffffff8005c74a20 x19: ffffff8005c74a20 x18: ffffffc008ab9630
[    2.876819] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 00000000000001fa
[    2.883949] x14: 00000000000005ee x13: 00000000000001fa x12: 00000000ffffffea
[    2.891081] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
[    2.898212] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[    2.905343] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb1b0
[    2.912473] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 000000000000005c
[    2.919604] Call trace:
[    2.922040]  kobject_put+0x68/0xf0
[    2.925436]  device_add+0xfc/0x840
[    2.928832]  of_device_add+0x4c/0x5c
[    2.932400]  of_platform_device_create_pdata+0xb8/0xf0
[    2.937530]  of_platform_bus_create+0x104/0x350
[    2.942053]  of_platform_populate+0x54/0xe0
[    2.946228]  parse_mtd_partitions+0x430/0x490
[    2.950579]  mtd_device_parse_register+0x90/0x2b0
[    2.955276]  spi_nor_probe+0x1f8/0x2b0
[    2.959018]  spi_mem_probe+0x68/0xa0
[    2.962586]  spi_probe+0x80/0xdc
[    2.965808]  really_probe.part.0+0x98/0x280
[    2.969983]  __driver_probe_device+0x94/0x140
[    2.974332]  driver_probe_device+0x40/0x114
[    2.978507]  __device_attach_driver+0xb0/0x10c
[    2.982943]  bus_for_each_drv+0x64/0xa0
[    2.986772]  __device_attach+0xa8/0x16c
[    2.990599]  device_initial_probe+0x10/0x20
[    2.994775]  bus_probe_device+0x94/0x9c
[    2.998605]  device_add+0x35c/0x840
[    3.002087]  __spi_add_device+0x70/0x114
[    3.006002]  spi_add_device+0x5c/0x90
[    3.009656]  of_register_spi_device+0x204/0x330
[    3.014178]  spi_register_controller+0x3e8/0x6dc
[    3.018788]  devm_spi_register_controller+0x20/0x74
[    3.023658]  mtk_nor_probe+0x344/0x4c0
[    3.027400]  platform_probe+0x64/0xd0
[    3.031054]  really_probe.part.0+0x98/0x280
[    3.035230]  __driver_probe_device+0x94/0x140
[    3.039578]  driver_probe_device+0x40/0x114
[    3.043753]  __driver_attach+0xf0/0x180
[    3.047581]  bus_for_each_dev+0x5c/0x90
[    3.051410]  driver_attach+0x20/0x2c
[    3.054980]  bus_add_driver+0x140/0x1ec
[    3.058810]  driver_register+0x74/0x120
[    3.062638]  __platform_driver_register+0x24/0x30
[    3.067335]  mtk_nor_driver_init+0x18/0x20
[    3.071425]  do_one_initcall+0x4c/0x1c0
[    3.075253]  kernel_init_freeable+0x230/0x294
[    3.079604]  kernel_init+0x20/0x120
[    3.083084]  ret_from_fork+0x10/0x20
[    3.086653] ---[ end trace 0000000000000000 ]---
[    3.091298] OF: Bad cell count for /spi@11014000/flash@0/partitions
[    3.097577] OF: Bad cell count for /spi@11014000/flash@0/partitions
[    3.103862] ------------[ cut here ]------------
[    3.108468] kobject: '(null)' (0000000097a89bbf): is not initialized, yet kobject_get() is being called.
[    3.117953] WARNING: CPU: 0 PID: 1 at kobject_get+0x68/0x94
[    3.123521] Modules linked in:
[    3.126566] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S      W         5.18.0-rc1+ #0
[    3.134302] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
[    3.140297] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    3.147251] pc : kobject_get+0x68/0x94
[    3.150994] lr : kobject_get+0x68/0x94
[    3.154736] sp : ffffffc008bdb4a0
[    3.158041] x29: ffffffc008bdb4a0 x28: 0000000000000000 x27: ffffff8005c57810
[    3.165173] x26: ffffff8005c74a20 x25: 0000000000000000 x24: 0000000000000001
[    3.172304] x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000
[    3.179434] x20: ffffff8005c74a20 x19: ffffff8005c74a20 x18: ffffffc008ab9630
[    3.186565] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 000000000000023b
[    3.193696] x14: 00000000000006b1 x13: 000000000000023b x12: 00000000ffffffea
[    3.200826] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
[    3.207957] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[    3.215088] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb1c0
[    3.222218] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 000000000000005c
[    3.229350] Call trace:
[    3.231786]  kobject_get+0x68/0x94
[    3.235182]  device_add+0xa4/0x840
[    3.238578]  of_device_add+0x4c/0x5c
[    3.242145]  of_platform_device_create_pdata+0xb8/0xf0
[    3.247275]  of_platform_bus_create+0x104/0x350
[    3.251798]  of_platform_populate+0x54/0xe0
[    3.255973]  parse_mtd_partitions+0x430/0x490
[    3.260324]  mtd_device_parse_register+0x90/0x2b0
[    3.265022]  spi_nor_probe+0x1f8/0x2b0
[    3.268765]  spi_mem_probe+0x68/0xa0
[    3.272333]  spi_probe+0x80/0xdc
[    3.275555]  really_probe.part.0+0x98/0x280
[    3.279730]  __driver_probe_device+0x94/0x140
[    3.284079]  driver_probe_device+0x40/0x114
[    3.288254]  __device_attach_driver+0xb0/0x10c
[    3.292690]  bus_for_each_drv+0x64/0xa0
[    3.296519]  __device_attach+0xa8/0x16c
[    3.300347]  device_initial_probe+0x10/0x20
[    3.304522]  bus_probe_device+0x94/0x9c
[    3.308351]  device_add+0x35c/0x840
[    3.311833]  __spi_add_device+0x70/0x114
[    3.315749]  spi_add_device+0x5c/0x90
[    3.319404]  of_register_spi_device+0x204/0x330
[    3.323927]  spi_register_controller+0x3e8/0x6dc
[    3.328537]  devm_spi_register_controller+0x20/0x74
[    3.333407]  mtk_nor_probe+0x344/0x4c0
[    3.337149]  platform_probe+0x64/0xd0
[    3.340804]  really_probe.part.0+0x98/0x280
[    3.344978]  __driver_probe_device+0x94/0x140
[    3.349327]  driver_probe_device+0x40/0x114
[    3.353502]  __driver_attach+0xf0/0x180
[    3.357329]  bus_for_each_dev+0x5c/0x90
[    3.361159]  driver_attach+0x20/0x2c
[    3.364728]  bus_add_driver+0x140/0x1ec
[    3.368557]  driver_register+0x74/0x120
[    3.372385]  __platform_driver_register+0x24/0x30
[    3.377081]  mtk_nor_driver_init+0x18/0x20
[    3.381172]  do_one_initcall+0x4c/0x1c0
[    3.385001]  kernel_init_freeable+0x230/0x294
[    3.389351]  kernel_init+0x20/0x120
[    3.392831]  ret_from_fork+0x10/0x20
[    3.396399] ---[ end trace 0000000000000000 ]---
[    3.401017] ------------[ cut here ]------------
[    3.405623] kobject: '(null)' (0000000097a89bbf): is not initialized, yet kobject_get() is being called.
[    3.415108] WARNING: CPU: 0 PID: 1 at kobject_get+0x68/0x94
[    3.420676] Modules linked in:
[    3.423722] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S      W         5.18.0-rc1+ #0
[    3.431456] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
[    3.437452] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    3.444405] pc : kobject_get+0x68/0x94
[    3.448148] lr : kobject_get+0x68/0x94
[    3.451890] sp : ffffffc008bdb3a0
[    3.455194] x29: ffffffc008bdb3a0 x28: 0000000000000000 x27: ffffff8005c57810
[    3.462325] x26: ffffff8005c74a20 x25: 0000000000000000 x24: 0000000000000001
[    3.469456] x23: 0000000000000000 x22: 0000000000000000 x21: ffffff8005c74a20
[    3.476586] x20: ffffff8005c57810 x19: ffffff8005c74a20 x18: ffffffc008ab9630
[    3.483717] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 000000000000027a
[    3.490848] x14: 000000000000076e x13: 000000000000027a x12: 00000000ffffffea
[    3.497979] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
[    3.505109] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[    3.512240] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb0c0
[    3.519372] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 000000000000005c
[    3.526502] Call trace:
[    3.528938]  kobject_get+0x68/0x94
[    3.532334]  kobject_add_internal+0x34/0x330
[    3.536598]  kobject_add+0x80/0xe0
[    3.539994]  device_add+0xd8/0x840
[    3.543389]  of_device_add+0x4c/0x5c
[    3.546957]  of_platform_device_create_pdata+0xb8/0xf0
[    3.552088]  of_platform_bus_create+0x104/0x350
[    3.556611]  of_platform_populate+0x54/0xe0
[    3.560786]  parse_mtd_partitions+0x430/0x490
[    3.565137]  mtd_device_parse_register+0x90/0x2b0
[    3.569835]  spi_nor_probe+0x1f8/0x2b0
[    3.573578]  spi_mem_probe+0x68/0xa0
[    3.577146]  spi_probe+0x80/0xdc
[    3.580368]  really_probe.part.0+0x98/0x280
[    3.584543]  __driver_probe_device+0x94/0x140
[    3.588891]  driver_probe_device+0x40/0x114
[    3.593066]  __device_attach_driver+0xb0/0x10c
[    3.597502]  bus_for_each_drv+0x64/0xa0
[    3.601331]  __device_attach+0xa8/0x16c
[    3.605159]  device_initial_probe+0x10/0x20
[    3.609334]  bus_probe_device+0x94/0x9c
[    3.613164]  device_add+0x35c/0x840
[    3.616646]  __spi_add_device+0x70/0x114
[    3.620561]  spi_add_device+0x5c/0x90
[    3.624215]  of_register_spi_device+0x204/0x330
[    3.628739]  spi_register_controller+0x3e8/0x6dc
[    3.633349]  devm_spi_register_controller+0x20/0x74
[    3.638219]  mtk_nor_probe+0x344/0x4c0
[    3.641961]  platform_probe+0x64/0xd0
[    3.645616]  really_probe.part.0+0x98/0x280
[    3.649791]  __driver_probe_device+0x94/0x140
[    3.654139]  driver_probe_device+0x40/0x114
[    3.658314]  __driver_attach+0xf0/0x180
[    3.662142]  bus_for_each_dev+0x5c/0x90
[    3.665971]  driver_attach+0x20/0x2c
[    3.669540]  bus_add_driver+0x140/0x1ec
[    3.673371]  driver_register+0x74/0x120
[    3.677199]  __platform_driver_register+0x24/0x30
[    3.681895]  mtk_nor_driver_init+0x18/0x20
[    3.685986]  do_one_initcall+0x4c/0x1c0
[    3.689814]  kernel_init_freeable+0x230/0x294
[    3.694164]  kernel_init+0x20/0x120
[    3.697644]  ret_from_fork+0x10/0x20
[    3.701212] ---[ end trace 0000000000000000 ]---
[    3.705829] ------------[ cut here ]------------
[    3.710440] kobject: '(null)' (0000000097a89bbf): is not initialized, yet kobject_put() is being called.
[    3.719924] WARNING: CPU: 0 PID: 1 at kobject_put+0x68/0xf0
[    3.725493] Modules linked in:
[    3.728538] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S      W         5.18.0-rc1+ #0
[    3.736274] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
[    3.742270] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    3.749224] pc : kobject_put+0x68/0xf0
[    3.752966] lr : kobject_put+0x68/0xf0
[    3.756708] sp : ffffffc008bdb390
[    3.760012] x29: ffffffc008bdb390 x28: 0000000000000000 x27: ffffff8005c57810
[    3.767143] x26: ffffff8005c74a20 x25: 0000000000000000 x24: ffffffc008b55368
[    3.774274] x23: 0000000000000000 x22: 00000000fffffffe x21: ffffff8005c74a20
[    3.781406] x20: ffffff8005c57810 x19: ffffff8005c74a20 x18: ffffffc008ab9630
[    3.788536] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 00000000000002bb
[    3.795667] x14: 0000000000000831 x13: 00000000000002bb x12: 00000000ffffffea
[    3.802798] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
[    3.809928] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[    3.817059] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb0b0
[    3.824189] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 000000000000005c
[    3.831321] Call trace:
[    3.833757]  kobject_put+0x68/0xf0
[    3.837153]  kobject_add_internal+0x130/0x330
[    3.841503]  kobject_add+0x80/0xe0
[    3.844899]  device_add+0xd8/0x840
[    3.848294]  of_device_add+0x4c/0x5c
[    3.851861]  of_platform_device_create_pdata+0xb8/0xf0
[    3.856992]  of_platform_bus_create+0x104/0x350
[    3.861515]  of_platform_populate+0x54/0xe0
[    3.865690]  parse_mtd_partitions+0x430/0x490
[    3.870040]  mtd_device_parse_register+0x90/0x2b0
[    3.874737]  spi_nor_probe+0x1f8/0x2b0
[    3.878479]  spi_mem_probe+0x68/0xa0
[    3.882047]  spi_probe+0x80/0xdc
[    3.885269]  really_probe.part.0+0x98/0x280
[    3.889444]  __driver_probe_device+0x94/0x140
[    3.893792]  driver_probe_device+0x40/0x114
[    3.897968]  __device_attach_driver+0xb0/0x10c
[    3.902403]  bus_for_each_drv+0x64/0xa0
[    3.906233]  __device_attach+0xa8/0x16c
[    3.910061]  device_initial_probe+0x10/0x20
[    3.914235]  bus_probe_device+0x94/0x9c
[    3.918065]  device_add+0x35c/0x840
[    3.921547]  __spi_add_device+0x70/0x114
[    3.925461]  spi_add_device+0x5c/0x90
[    3.929116]  of_register_spi_device+0x204/0x330
[    3.933639]  spi_register_controller+0x3e8/0x6dc
[    3.938248]  devm_spi_register_controller+0x20/0x74
[    3.943118]  mtk_nor_probe+0x344/0x4c0
[    3.946860]  platform_probe+0x64/0xd0
[    3.950514]  really_probe.part.0+0x98/0x280
[    3.954689]  __driver_probe_device+0x94/0x140
[    3.959037]  driver_probe_device+0x40/0x114
[    3.963212]  __driver_attach+0xf0/0x180
[    3.967039]  bus_for_each_dev+0x5c/0x90
[    3.970869]  driver_attach+0x20/0x2c
[    3.974438]  bus_add_driver+0x140/0x1ec
[    3.978268]  driver_register+0x74/0x120
[    3.982096]  __platform_driver_register+0x24/0x30
[    3.986792]  mtk_nor_driver_init+0x18/0x20
[    3.990882]  do_one_initcall+0x4c/0x1c0
[    3.994711]  kernel_init_freeable+0x230/0x294
[    3.999061]  kernel_init+0x20/0x120
[    4.002541]  ret_from_fork+0x10/0x20
[    4.006109] ---[ end trace 0000000000000000 ]---
[    4.010725] kobject_add_internal failed for 11014000.spi:flash@0:partitions:partition@1000000 (error: -2 parent: (null))
[    4.021590] ------------[ cut here ]------------
[    4.026196] kobject: '(null)' (0000000097a89bbf): is not initialized, yet kobject_put() is being called.
[    4.035681] WARNING: CPU: 0 PID: 1 at kobject_put+0x68/0xf0
[    4.041248] Modules linked in:
[    4.044294] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S      W         5.18.0-rc1+ #0
[    4.052030] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
[    4.058025] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    4.064979] pc : kobject_put+0x68/0xf0
[    4.068722] lr : kobject_put+0x68/0xf0
[    4.072463] sp : ffffffc008bdb490
[    4.075768] x29: ffffffc008bdb490 x28: 0000000000000000 x27: ffffff8005c57810
[    4.082900] x26: ffffff8005c74a20 x25: 0000000000000000 x24: 0000000000000001
[    4.090031] x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000
[    4.097162] x20: ffffff8005c74a20 x19: ffffff8005c74a20 x18: ffffffc008ab9630
[    4.104293] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 00000000000002fd
[    4.111424] x14: 00000000000008f7 x13: 00000000000002fd x12: 00000000ffffffea
[    4.118554] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
[    4.125685] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[    4.132816] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb1b0
[    4.139946] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 000000000000005c
[    4.147078] Call trace:
[    4.149514]  kobject_put+0x68/0xf0
[    4.152910]  device_add+0xfc/0x840
[    4.156305]  of_device_add+0x4c/0x5c
[    4.159872]  of_platform_device_create_pdata+0xb8/0xf0
[    4.165003]  of_platform_bus_create+0x104/0x350
[    4.169525]  of_platform_populate+0x54/0xe0
[    4.173700]  parse_mtd_partitions+0x430/0x490
[    4.178051]  mtd_device_parse_register+0x90/0x2b0
[    4.182749]  spi_nor_probe+0x1f8/0x2b0
[    4.186491]  spi_mem_probe+0x68/0xa0
[    4.190059]  spi_probe+0x80/0xdc
[    4.193281]  really_probe.part.0+0x98/0x280
[    4.197456]  __driver_probe_device+0x94/0x140
[    4.201804]  driver_probe_device+0x40/0x114
[    4.205979]  __device_attach_driver+0xb0/0x10c
[    4.210414]  bus_for_each_drv+0x64/0xa0
[    4.214244]  __device_attach+0xa8/0x16c
[    4.218072]  device_initial_probe+0x10/0x20
[    4.222248]  bus_probe_device+0x94/0x9c
[    4.226078]  device_add+0x35c/0x840
[    4.229560]  __spi_add_device+0x70/0x114
[    4.233476]  spi_add_device+0x5c/0x90
[    4.237130]  of_register_spi_device+0x204/0x330
[    4.241653]  spi_register_controller+0x3e8/0x6dc
[    4.246262]  devm_spi_register_controller+0x20/0x74
[    4.251132]  mtk_nor_probe+0x344/0x4c0
[    4.254875]  platform_probe+0x64/0xd0
[    4.258529]  really_probe.part.0+0x98/0x280
[    4.262705]  __driver_probe_device+0x94/0x140
[    4.267054]  driver_probe_device+0x40/0x114
[    4.271229]  __driver_attach+0xf0/0x180
[    4.275057]  bus_for_each_dev+0x5c/0x90
[    4.278887]  driver_attach+0x20/0x2c
[    4.282456]  bus_add_driver+0x140/0x1ec
[    4.286286]  driver_register+0x74/0x120
[    4.290113]  __platform_driver_register+0x24/0x30
[    4.294810]  mtk_nor_driver_init+0x18/0x20
[    4.298900]  do_one_initcall+0x4c/0x1c0
[    4.302728]  kernel_init_freeable+0x230/0x294
[    4.307079]  kernel_init+0x20/0x120
[    4.310559]  ret_from_fork+0x10/0x20
[    4.314127] ---[ end trace 0000000000000000 ]---
[    4.318748] Creating 7 MTD partitions on "spi0.0":
[    4.323538] 0x000000000000-0x000000020000 : "bl2"
[    4.328902] 0x000000020000-0x0000000c0000 : "fip"
[    4.334231] 0x0000000c0000-0x0000000d0000 : "u-boot-env"
[    4.340495] 0x0000000d0000-0x000000110000 : "factory"
[    4.346152] 0x000000110000-0x000000120000 : "eeprom"
[    4.352108] 0x000000120000-0x000001000000 : "recovery"
[    4.357862] 0x000001000000-0x000004000000 : "firmware"
[    4.363746] mtk-spi-nor 11014000.spi: spi frequency: 46666653 Hz
[...]
---


Best regards


Daniel

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: Regression? [PATCH 1/2] mtd: call of_platform_populate() for MTD partitions

[Miquel Raynal]

Hi Daniel,

daniel@makrotopia.org wrote on Mon, 25 Apr 2022 02:20:34 +0100:

> Hi Rafal,
> Hi Miguel,
> 
> 
> On Mon, Apr 11, 2022 at 11:00:32AM +0200, Miquel Raynal wrote:
> > On Wed, 2022-04-06 at 14:32:24 UTC, =?utf-8?b?UmFmYcWCIE1pxYJlY2tp?= wrote:  
> > > From: Rafał Miłecki <rafal@milecki.pl>
> > > 
> > > Until this change MTD subsystem supported handling partitions only with
> > > MTD partitions parsers. That's a specific / limited API designed around
> > > partitions.
> > > 
> > > Some MTD partitions may however require different handling. They may
> > > contain specific data that needs to be parsed and somehow extracted. For
> > > that purpose MTD subsystem should allow binding of standard platform
> > > drivers.
> > > 
> > > An example can be U-Boot (sub)partition with environment variables.
> > > There exist a "u-boot,env" DT binding for MTD (sub)partition that
> > > requires an NVMEM driver.
> > > 
> > > Ref: 5db1c2dbc04c ("dt-bindings: nvmem: add U-Boot environment variables binding")
> > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl>  
> > 
> > Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next, thanks.  
> 
> I'm trying to use next-20220422 and noticed a few new oops'es.
> Turns out it could be a problem with this commit according to
> 
> [daniel@box linux.git]$ git bisect good
> 68471517e883902cdff6ea399d043b17f803b1a8 is the first bad commit
> commit 68471517e883902cdff6ea399d043b17f803b1a8
> Author: Rafał Miłecki <rafal@milecki.pl>
> Date:   Wed Apr 6 16:32:24 2022 +0200
> 
>     mtd: call of_platform_populate() for MTD partitions
> [...]
> ---
> 
> So when ever there is at least one 'compatible' node for any of the
> mtd partitions I get the oops messages below. It doesn't really matter
> what the compatible string is, "nvmem-cells" as well as "denx,fit"
> (used for OpenWrt mtdsplit not even present in linux-next, so just a
> dead hint in DTS) make the kernel to oops.
> 
> Despite the messages being shown, both accessing MTD partitions and
> also eth0 MAC address populated via NVMEM seem to work without
> problems (at least looks like it on first sight).
> 
> Find the full device tree here:
> 
> https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=target/linux/mediatek/dts/mt7622-ubnt-unifi-6-lr-ubootmod.dts

Even though these compatibles are not mainline, it feels like the
problem exists here as well. I'm dropping this change for now, let's
fix this first.

> 
> ---
> [...]
> [    0.549448] mtk-spi-nor 11014000.spi: IRQ not available.
> [    0.556396] spi-nor spi0.0: w25q512jvq (65536 Kbytes)
> [    0.933381] Freeing initrd memory: 2124K
> [    0.941567] 7 fixed-partitions partitions found on MTD device spi0.0
> [    0.947966] OF: Bad cell count for /spi@11014000/flash@0/partitions
> [    0.954286] OF: Bad cell count for /spi@11014000/flash@0/partitions
> [    0.960583] ------------[ cut here ]------------
> [    0.965192] kobject: '(null)' (0000000097a89bbf): is not initialized, yet kobject_get() is being called.
> [    0.974688] WARNING: CPU: 0 PID: 1 at kobject_get+0x68/0x94
> [    0.980263] Modules linked in:
> [    0.983313] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S                5.18.0-rc1+ #0
> [    0.991049] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
> [    0.997046] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> [    1.004000] pc : kobject_get+0x68/0x94
> [    1.007743] lr : kobject_get+0x68/0x94
> [    1.011484] sp : ffffffc008bdb4a0
> [    1.014789] x29: ffffffc008bdb4a0 x28: 0000000000000000 x27: ffffff8005c57810
> [    1.021920] x26: ffffff8005c74a20 x25: 0000000000000000 x24: 0000000000000001
> [    1.029050] x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000
> [    1.036182] x20: ffffff8005c74a20 x19: ffffff8005c74a20 x18: ffffffc008ab9630
> [    1.043312] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 0000000000000074
> [    1.050443] x14: 000000000000015c x13: 0000000000000074 x12: 00000000ffffffea
> [    1.057574] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
> [    1.064705] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
> [    1.071835] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb1c0
> [    1.078966] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 000000000000005c
> [    1.086097] Call trace:
> [    1.088534]  kobject_get+0x68/0x94
> [    1.091930]  device_add+0xa4/0x840
> [    1.095328]  of_device_add+0x4c/0x5c
> [    1.098898]  of_platform_device_create_pdata+0xb8/0xf0
> [    1.104029]  of_platform_bus_create+0x104/0x350
> [    1.108552]  of_platform_populate+0x54/0xe0
> [    1.112728]  parse_mtd_partitions+0x430/0x490
> [    1.117080]  mtd_device_parse_register+0x90/0x2b0
> [    1.121777]  spi_nor_probe+0x1f8/0x2b0
> [    1.125521]  spi_mem_probe+0x68/0xa0
> [    1.129092]  spi_probe+0x80/0xdc
> [    1.132314]  really_probe.part.0+0x98/0x280
> [    1.136490]  __driver_probe_device+0x94/0x140
> [    1.140839]  driver_probe_device+0x40/0x114
> [    1.145014]  __device_attach_driver+0xb0/0x10c
> [    1.149450]  bus_for_each_drv+0x64/0xa0
> [    1.153280]  __device_attach+0xa8/0x16c
> [    1.157108]  device_initial_probe+0x10/0x20
> [    1.161283]  bus_probe_device+0x94/0x9c
> [    1.165114]  device_add+0x35c/0x840
> [    1.168596]  __spi_add_device+0x70/0x114
> [    1.172510]  spi_add_device+0x5c/0x90
> [    1.176165]  of_register_spi_device+0x204/0x330
> [    1.180688]  spi_register_controller+0x3e8/0x6dc
> [    1.185299]  devm_spi_register_controller+0x20/0x74
> [    1.190169]  mtk_nor_probe+0x344/0x4c0
> [    1.193911]  platform_probe+0x64/0xd0
> [    1.197566]  really_probe.part.0+0x98/0x280
> [    1.201741]  __driver_probe_device+0x94/0x140
> [    1.206089]  driver_probe_device+0x40/0x114
> [    1.210264]  __driver_attach+0xf0/0x180
> [    1.214092]  bus_for_each_dev+0x5c/0x90
> [    1.217922]  driver_attach+0x20/0x2c
> [    1.221491]  bus_add_driver+0x140/0x1ec
> [    1.225320]  driver_register+0x74/0x120
> [    1.229149]  __platform_driver_register+0x24/0x30
> [    1.233845]  mtk_nor_driver_init+0x18/0x20
> [    1.237938]  do_one_initcall+0x4c/0x1c0
> [    1.241768]  kernel_init_freeable+0x230/0x294
> [    1.246120]  kernel_init+0x20/0x120
> [    1.249601]  ret_from_fork+0x10/0x20
> [    1.253170] ---[ end trace 0000000000000000 ]---
> [    1.257796] ------------[ cut here ]------------


Thanks,
Miquèl

Re: Regression? [PATCH 1/2] mtd: call of_platform_populate() for MTD partitions

[Miquel Raynal]

Hi Daniel,

daniel@makrotopia.org wrote on Mon, 25 Apr 2022 02:20:34 +0100:

> Hi Rafal,
> Hi Miguel,
> 
> 
> On Mon, Apr 11, 2022 at 11:00:32AM +0200, Miquel Raynal wrote:
> > On Wed, 2022-04-06 at 14:32:24 UTC, =?utf-8?b?UmFmYcWCIE1pxYJlY2tp?= wrote:  
> > > From: Rafał Miłecki <rafal@milecki.pl>
> > > 
> > > Until this change MTD subsystem supported handling partitions only with
> > > MTD partitions parsers. That's a specific / limited API designed around
> > > partitions.
> > > 
> > > Some MTD partitions may however require different handling. They may
> > > contain specific data that needs to be parsed and somehow extracted. For
> > > that purpose MTD subsystem should allow binding of standard platform
> > > drivers.
> > > 
> > > An example can be U-Boot (sub)partition with environment variables.
> > > There exist a "u-boot,env" DT binding for MTD (sub)partition that
> > > requires an NVMEM driver.
> > > 
> > > Ref: 5db1c2dbc04c ("dt-bindings: nvmem: add U-Boot environment variables binding")
> > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl>  
> > 
> > Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next, thanks.  
> 
> I'm trying to use next-20220422 and noticed a few new oops'es.
> Turns out it could be a problem with this commit according to
> 
> [daniel@box linux.git]$ git bisect good
> 68471517e883902cdff6ea399d043b17f803b1a8 is the first bad commit
> commit 68471517e883902cdff6ea399d043b17f803b1a8
> Author: Rafał Miłecki <rafal@milecki.pl>
> Date:   Wed Apr 6 16:32:24 2022 +0200
> 
>     mtd: call of_platform_populate() for MTD partitions
> [...]
> ---
> 
> So when ever there is at least one 'compatible' node for any of the
> mtd partitions I get the oops messages below. It doesn't really matter
> what the compatible string is, "nvmem-cells" as well as "denx,fit"
> (used for OpenWrt mtdsplit not even present in linux-next, so just a
> dead hint in DTS) make the kernel to oops.
> 
> Despite the messages being shown, both accessing MTD partitions and
> also eth0 MAC address populated via NVMEM seem to work without
> problems (at least looks like it on first sight).
> 
> Find the full device tree here:
> 
> https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=target/linux/mediatek/dts/mt7622-ubnt-unifi-6-lr-ubootmod.dts

Even though these compatibles are not mainline, it feels like the
problem exists here as well. I'm dropping this change for now, let's
fix this first.

> 
> ---
> [...]
> [    0.549448] mtk-spi-nor 11014000.spi: IRQ not available.
> [    0.556396] spi-nor spi0.0: w25q512jvq (65536 Kbytes)
> [    0.933381] Freeing initrd memory: 2124K
> [    0.941567] 7 fixed-partitions partitions found on MTD device spi0.0
> [    0.947966] OF: Bad cell count for /spi@11014000/flash@0/partitions
> [    0.954286] OF: Bad cell count for /spi@11014000/flash@0/partitions
> [    0.960583] ------------[ cut here ]------------
> [    0.965192] kobject: '(null)' (0000000097a89bbf): is not initialized, yet kobject_get() is being called.
> [    0.974688] WARNING: CPU: 0 PID: 1 at kobject_get+0x68/0x94
> [    0.980263] Modules linked in:
> [    0.983313] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S                5.18.0-rc1+ #0
> [    0.991049] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
> [    0.997046] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> [    1.004000] pc : kobject_get+0x68/0x94
> [    1.007743] lr : kobject_get+0x68/0x94
> [    1.011484] sp : ffffffc008bdb4a0
> [    1.014789] x29: ffffffc008bdb4a0 x28: 0000000000000000 x27: ffffff8005c57810
> [    1.021920] x26: ffffff8005c74a20 x25: 0000000000000000 x24: 0000000000000001
> [    1.029050] x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000
> [    1.036182] x20: ffffff8005c74a20 x19: ffffff8005c74a20 x18: ffffffc008ab9630
> [    1.043312] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 0000000000000074
> [    1.050443] x14: 000000000000015c x13: 0000000000000074 x12: 00000000ffffffea
> [    1.057574] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
> [    1.064705] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
> [    1.071835] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb1c0
> [    1.078966] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 000000000000005c
> [    1.086097] Call trace:
> [    1.088534]  kobject_get+0x68/0x94
> [    1.091930]  device_add+0xa4/0x840
> [    1.095328]  of_device_add+0x4c/0x5c
> [    1.098898]  of_platform_device_create_pdata+0xb8/0xf0
> [    1.104029]  of_platform_bus_create+0x104/0x350
> [    1.108552]  of_platform_populate+0x54/0xe0
> [    1.112728]  parse_mtd_partitions+0x430/0x490
> [    1.117080]  mtd_device_parse_register+0x90/0x2b0
> [    1.121777]  spi_nor_probe+0x1f8/0x2b0
> [    1.125521]  spi_mem_probe+0x68/0xa0
> [    1.129092]  spi_probe+0x80/0xdc
> [    1.132314]  really_probe.part.0+0x98/0x280
> [    1.136490]  __driver_probe_device+0x94/0x140
> [    1.140839]  driver_probe_device+0x40/0x114
> [    1.145014]  __device_attach_driver+0xb0/0x10c
> [    1.149450]  bus_for_each_drv+0x64/0xa0
> [    1.153280]  __device_attach+0xa8/0x16c
> [    1.157108]  device_initial_probe+0x10/0x20
> [    1.161283]  bus_probe_device+0x94/0x9c
> [    1.165114]  device_add+0x35c/0x840
> [    1.168596]  __spi_add_device+0x70/0x114
> [    1.172510]  spi_add_device+0x5c/0x90
> [    1.176165]  of_register_spi_device+0x204/0x330
> [    1.180688]  spi_register_controller+0x3e8/0x6dc
> [    1.185299]  devm_spi_register_controller+0x20/0x74
> [    1.190169]  mtk_nor_probe+0x344/0x4c0
> [    1.193911]  platform_probe+0x64/0xd0
> [    1.197566]  really_probe.part.0+0x98/0x280
> [    1.201741]  __driver_probe_device+0x94/0x140
> [    1.206089]  driver_probe_device+0x40/0x114
> [    1.210264]  __driver_attach+0xf0/0x180
> [    1.214092]  bus_for_each_dev+0x5c/0x90
> [    1.217922]  driver_attach+0x20/0x2c
> [    1.221491]  bus_add_driver+0x140/0x1ec
> [    1.225320]  driver_register+0x74/0x120
> [    1.229149]  __platform_driver_register+0x24/0x30
> [    1.233845]  mtk_nor_driver_init+0x18/0x20
> [    1.237938]  do_one_initcall+0x4c/0x1c0
> [    1.241768]  kernel_init_freeable+0x230/0x294
> [    1.246120]  kernel_init+0x20/0x120
> [    1.249601]  ret_from_fork+0x10/0x20
> [    1.253170] ---[ end trace 0000000000000000 ]---
> [    1.257796] ------------[ cut here ]------------


Thanks,
Miquèl

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: Regression? [PATCH 1/2] mtd: call of_platform_populate() for MTD partitions

[Miquel Raynal]

Hi Daniel,

daniel@makrotopia.org wrote on Mon, 25 Apr 2022 02:20:34 +0100:

> Hi Rafal,
> Hi Miguel,
> 
> 
> On Mon, Apr 11, 2022 at 11:00:32AM +0200, Miquel Raynal wrote:
> > On Wed, 2022-04-06 at 14:32:24 UTC, =?utf-8?b?UmFmYcWCIE1pxYJlY2tp?= wrote:  
> > > From: Rafał Miłecki <rafal@milecki.pl>
> > > 
> > > Until this change MTD subsystem supported handling partitions only with
> > > MTD partitions parsers. That's a specific / limited API designed around
> > > partitions.
> > > 
> > > Some MTD partitions may however require different handling. They may
> > > contain specific data that needs to be parsed and somehow extracted. For
> > > that purpose MTD subsystem should allow binding of standard platform
> > > drivers.
> > > 
> > > An example can be U-Boot (sub)partition with environment variables.
> > > There exist a "u-boot,env" DT binding for MTD (sub)partition that
> > > requires an NVMEM driver.
> > > 
> > > Ref: 5db1c2dbc04c ("dt-bindings: nvmem: add U-Boot environment variables binding")
> > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl>  
> > 
> > Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next, thanks.  
> 
> I'm trying to use next-20220422 and noticed a few new oops'es.
> Turns out it could be a problem with this commit according to
> 
> [daniel@box linux.git]$ git bisect good
> 68471517e883902cdff6ea399d043b17f803b1a8 is the first bad commit
> commit 68471517e883902cdff6ea399d043b17f803b1a8
> Author: Rafał Miłecki <rafal@milecki.pl>
> Date:   Wed Apr 6 16:32:24 2022 +0200
> 
>     mtd: call of_platform_populate() for MTD partitions
> [...]
> ---
> 
> So when ever there is at least one 'compatible' node for any of the
> mtd partitions I get the oops messages below. It doesn't really matter
> what the compatible string is, "nvmem-cells" as well as "denx,fit"
> (used for OpenWrt mtdsplit not even present in linux-next, so just a
> dead hint in DTS) make the kernel to oops.
> 
> Despite the messages being shown, both accessing MTD partitions and
> also eth0 MAC address populated via NVMEM seem to work without
> problems (at least looks like it on first sight).
> 
> Find the full device tree here:
> 
> https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=target/linux/mediatek/dts/mt7622-ubnt-unifi-6-lr-ubootmod.dts

Even though these compatibles are not mainline, it feels like the
problem exists here as well. I'm dropping this change for now, let's
fix this first.

> 
> ---
> [...]
> [    0.549448] mtk-spi-nor 11014000.spi: IRQ not available.
> [    0.556396] spi-nor spi0.0: w25q512jvq (65536 Kbytes)
> [    0.933381] Freeing initrd memory: 2124K
> [    0.941567] 7 fixed-partitions partitions found on MTD device spi0.0
> [    0.947966] OF: Bad cell count for /spi@11014000/flash@0/partitions
> [    0.954286] OF: Bad cell count for /spi@11014000/flash@0/partitions
> [    0.960583] ------------[ cut here ]------------
> [    0.965192] kobject: '(null)' (0000000097a89bbf): is not initialized, yet kobject_get() is being called.
> [    0.974688] WARNING: CPU: 0 PID: 1 at kobject_get+0x68/0x94
> [    0.980263] Modules linked in:
> [    0.983313] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G S                5.18.0-rc1+ #0
> [    0.991049] Hardware name: Ubiquiti UniFi 6 LR (U-Boot mod) (DT)
> [    0.997046] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> [    1.004000] pc : kobject_get+0x68/0x94
> [    1.007743] lr : kobject_get+0x68/0x94
> [    1.011484] sp : ffffffc008bdb4a0
> [    1.014789] x29: ffffffc008bdb4a0 x28: 0000000000000000 x27: ffffff8005c57810
> [    1.021920] x26: ffffff8005c74a20 x25: 0000000000000000 x24: 0000000000000001
> [    1.029050] x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000
> [    1.036182] x20: ffffff8005c74a20 x19: ffffff8005c74a20 x18: ffffffc008ab9630
> [    1.043312] x17: 6f6b20746579202c x16: 64657a696c616974 x15: 0000000000000074
> [    1.050443] x14: 000000000000015c x13: 0000000000000074 x12: 00000000ffffffea
> [    1.057574] x11: 00000000ffffefff x10: 00000000ffffefff x9 : ffffffc008b11630
> [    1.064705] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
> [    1.071835] x5 : 0000000000000fff x4 : 0000000000000000 x3 : ffffffc008bdb1c0
> [    1.078966] x2 : 0000000000000000 x1 : ffffffc008ab9580 x0 : 000000000000005c
> [    1.086097] Call trace:
> [    1.088534]  kobject_get+0x68/0x94
> [    1.091930]  device_add+0xa4/0x840
> [    1.095328]  of_device_add+0x4c/0x5c
> [    1.098898]  of_platform_device_create_pdata+0xb8/0xf0
> [    1.104029]  of_platform_bus_create+0x104/0x350
> [    1.108552]  of_platform_populate+0x54/0xe0
> [    1.112728]  parse_mtd_partitions+0x430/0x490
> [    1.117080]  mtd_device_parse_register+0x90/0x2b0
> [    1.121777]  spi_nor_probe+0x1f8/0x2b0
> [    1.125521]  spi_mem_probe+0x68/0xa0
> [    1.129092]  spi_probe+0x80/0xdc
> [    1.132314]  really_probe.part.0+0x98/0x280
> [    1.136490]  __driver_probe_device+0x94/0x140
> [    1.140839]  driver_probe_device+0x40/0x114
> [    1.145014]  __device_attach_driver+0xb0/0x10c
> [    1.149450]  bus_for_each_drv+0x64/0xa0
> [    1.153280]  __device_attach+0xa8/0x16c
> [    1.157108]  device_initial_probe+0x10/0x20
> [    1.161283]  bus_probe_device+0x94/0x9c
> [    1.165114]  device_add+0x35c/0x840
> [    1.168596]  __spi_add_device+0x70/0x114
> [    1.172510]  spi_add_device+0x5c/0x90
> [    1.176165]  of_register_spi_device+0x204/0x330
> [    1.180688]  spi_register_controller+0x3e8/0x6dc
> [    1.185299]  devm_spi_register_controller+0x20/0x74
> [    1.190169]  mtk_nor_probe+0x344/0x4c0
> [    1.193911]  platform_probe+0x64/0xd0
> [    1.197566]  really_probe.part.0+0x98/0x280
> [    1.201741]  __driver_probe_device+0x94/0x140
> [    1.206089]  driver_probe_device+0x40/0x114
> [    1.210264]  __driver_attach+0xf0/0x180
> [    1.214092]  bus_for_each_dev+0x5c/0x90
> [    1.217922]  driver_attach+0x20/0x2c
> [    1.221491]  bus_add_driver+0x140/0x1ec
> [    1.225320]  driver_register+0x74/0x120
> [    1.229149]  __platform_driver_register+0x24/0x30
> [    1.233845]  mtk_nor_driver_init+0x18/0x20
> [    1.237938]  do_one_initcall+0x4c/0x1c0
> [    1.241768]  kernel_init_freeable+0x230/0x294
> [    1.246120]  kernel_init+0x20/0x120
> [    1.249601]  ret_from_fork+0x10/0x20
> [    1.253170] ---[ end trace 0000000000000000 ]---
> [    1.257796] ------------[ cut here ]------------


Thanks,
Miquèl

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: Regression? [PATCH 1/2] mtd: call of_platform_populate() for MTD partitions

[Rafał Miłecki]

On 25.04.2022 03:20, Daniel Golle wrote:
> On Mon, Apr 11, 2022 at 11:00:32AM +0200, Miquel Raynal wrote:
>> On Wed, 2022-04-06 at 14:32:24 UTC, =?utf-8?b?UmFmYcWCIE1pxYJlY2tp?= wrote:
>>> From: Rafał Miłecki <rafal@milecki.pl>
>>>
>>> Until this change MTD subsystem supported handling partitions only with
>>> MTD partitions parsers. That's a specific / limited API designed around
>>> partitions.
>>>
>>> Some MTD partitions may however require different handling. They may
>>> contain specific data that needs to be parsed and somehow extracted. For
>>> that purpose MTD subsystem should allow binding of standard platform
>>> drivers.
>>>
>>> An example can be U-Boot (sub)partition with environment variables.
>>> There exist a "u-boot,env" DT binding for MTD (sub)partition that
>>> requires an NVMEM driver.
>>>
>>> Ref: 5db1c2dbc04c ("dt-bindings: nvmem: add U-Boot environment variables binding")
>>> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
>>
>> Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next, thanks.
> 
> I'm trying to use next-20220422 and noticed a few new oops'es.
> Turns out it could be a problem with this commit according to
> 
> [daniel@box linux.git]$ git bisect good
> 68471517e883902cdff6ea399d043b17f803b1a8 is the first bad commit
> commit 68471517e883902cdff6ea399d043b17f803b1a8
> Author: Rafał Miłecki <rafal@milecki.pl>
> Date:   Wed Apr 6 16:32:24 2022 +0200
> 
>      mtd: call of_platform_populate() for MTD partitions
> [...]
> ---
> 
> So when ever there is at least one 'compatible' node for any of the
> mtd partitions I get the oops messages below. It doesn't really matter
> what the compatible string is, "nvmem-cells" as well as "denx,fit"
> (used for OpenWrt mtdsplit not even present in linux-next, so just a
> dead hint in DTS) make the kernel to oops.
> 
> Despite the messages being shown, both accessing MTD partitions and
> also eth0 MAC address populated via NVMEM seem to work without
> problems (at least looks like it on first sight).
> 
> Find the full device tree here:
> 
> https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=target/linux/mediatek/dts/mt7622-ubnt-unifi-6-lr-ubootmod.dts

I found it! It used to happen (before dropping patch) with:
# CONFIG_MTD_PARTITIONED_MASTER is not set

I'll work on V2 which doesn't require
CONFIG_MTD_PARTITIONED_MASTER=y

Re: Regression? [PATCH 1/2] mtd: call of_platform_populate() for MTD partitions

[Rafał Miłecki]

On 25.04.2022 03:20, Daniel Golle wrote:
> On Mon, Apr 11, 2022 at 11:00:32AM +0200, Miquel Raynal wrote:
>> On Wed, 2022-04-06 at 14:32:24 UTC, =?utf-8?b?UmFmYcWCIE1pxYJlY2tp?= wrote:
>>> From: Rafał Miłecki <rafal@milecki.pl>
>>>
>>> Until this change MTD subsystem supported handling partitions only with
>>> MTD partitions parsers. That's a specific / limited API designed around
>>> partitions.
>>>
>>> Some MTD partitions may however require different handling. They may
>>> contain specific data that needs to be parsed and somehow extracted. For
>>> that purpose MTD subsystem should allow binding of standard platform
>>> drivers.
>>>
>>> An example can be U-Boot (sub)partition with environment variables.
>>> There exist a "u-boot,env" DT binding for MTD (sub)partition that
>>> requires an NVMEM driver.
>>>
>>> Ref: 5db1c2dbc04c ("dt-bindings: nvmem: add U-Boot environment variables binding")
>>> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
>>
>> Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next, thanks.
> 
> I'm trying to use next-20220422 and noticed a few new oops'es.
> Turns out it could be a problem with this commit according to
> 
> [daniel@box linux.git]$ git bisect good
> 68471517e883902cdff6ea399d043b17f803b1a8 is the first bad commit
> commit 68471517e883902cdff6ea399d043b17f803b1a8
> Author: Rafał Miłecki <rafal@milecki.pl>
> Date:   Wed Apr 6 16:32:24 2022 +0200
> 
>      mtd: call of_platform_populate() for MTD partitions
> [...]
> ---
> 
> So when ever there is at least one 'compatible' node for any of the
> mtd partitions I get the oops messages below. It doesn't really matter
> what the compatible string is, "nvmem-cells" as well as "denx,fit"
> (used for OpenWrt mtdsplit not even present in linux-next, so just a
> dead hint in DTS) make the kernel to oops.
> 
> Despite the messages being shown, both accessing MTD partitions and
> also eth0 MAC address populated via NVMEM seem to work without
> problems (at least looks like it on first sight).
> 
> Find the full device tree here:
> 
> https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=target/linux/mediatek/dts/mt7622-ubnt-unifi-6-lr-ubootmod.dts

I found it! It used to happen (before dropping patch) with:
# CONFIG_MTD_PARTITIONED_MASTER is not set

I'll work on V2 which doesn't require
CONFIG_MTD_PARTITIONED_MASTER=y

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

Re: Regression? [PATCH 1/2] mtd: call of_platform_populate() for MTD partitions

[Rafał Miłecki]

On 25.04.2022 03:20, Daniel Golle wrote:
> On Mon, Apr 11, 2022 at 11:00:32AM +0200, Miquel Raynal wrote:
>> On Wed, 2022-04-06 at 14:32:24 UTC, =?utf-8?b?UmFmYcWCIE1pxYJlY2tp?= wrote:
>>> From: Rafał Miłecki <rafal@milecki.pl>
>>>
>>> Until this change MTD subsystem supported handling partitions only with
>>> MTD partitions parsers. That's a specific / limited API designed around
>>> partitions.
>>>
>>> Some MTD partitions may however require different handling. They may
>>> contain specific data that needs to be parsed and somehow extracted. For
>>> that purpose MTD subsystem should allow binding of standard platform
>>> drivers.
>>>
>>> An example can be U-Boot (sub)partition with environment variables.
>>> There exist a "u-boot,env" DT binding for MTD (sub)partition that
>>> requires an NVMEM driver.
>>>
>>> Ref: 5db1c2dbc04c ("dt-bindings: nvmem: add U-Boot environment variables binding")
>>> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
>>
>> Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next, thanks.
> 
> I'm trying to use next-20220422 and noticed a few new oops'es.
> Turns out it could be a problem with this commit according to
> 
> [daniel@box linux.git]$ git bisect good
> 68471517e883902cdff6ea399d043b17f803b1a8 is the first bad commit
> commit 68471517e883902cdff6ea399d043b17f803b1a8
> Author: Rafał Miłecki <rafal@milecki.pl>
> Date:   Wed Apr 6 16:32:24 2022 +0200
> 
>      mtd: call of_platform_populate() for MTD partitions
> [...]
> ---
> 
> So when ever there is at least one 'compatible' node for any of the
> mtd partitions I get the oops messages below. It doesn't really matter
> what the compatible string is, "nvmem-cells" as well as "denx,fit"
> (used for OpenWrt mtdsplit not even present in linux-next, so just a
> dead hint in DTS) make the kernel to oops.
> 
> Despite the messages being shown, both accessing MTD partitions and
> also eth0 MAC address populated via NVMEM seem to work without
> problems (at least looks like it on first sight).
> 
> Find the full device tree here:
> 
> https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob;f=target/linux/mediatek/dts/mt7622-ubnt-unifi-6-lr-ubootmod.dts

I found it! It used to happen (before dropping patch) with:
# CONFIG_MTD_PARTITIONED_MASTER is not set

I'll work on V2 which doesn't require
CONFIG_MTD_PARTITIONED_MASTER=y

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel