From: Oleksij Rempel <o.rempel@pengutronix.de> To: Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org> Cc: David Jander <david@protonic.nl>, Oleksij Rempel <o.rempel@pengutronix.de>, devicetree@vger.kernel.org, Fabio Estevam <festevam@gmail.com>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, NXP Linux Team <linux-imx@nxp.com>, Pengutronix Kernel Team <kernel@pengutronix.de>, Robin van der Gracht <robin@protonic.nl> Subject: [PATCH v1 06/17] arm: dts: imx6qdl-vicut1.dtsi: Fix debug LED gpio pins Date: Tue, 12 Apr 2022 09:39:53 +0200 [thread overview] Message-ID: <20220412074004.2485264-7-o.rempel@pengutronix.de> (raw) In-Reply-To: <20220412074004.2485264-1-o.rempel@pengutronix.de> From: David Jander <david@protonic.nl> While there are LEDs connected on some variants on GPIO4 pins 16 and 17, those are not the debug LEDs that should be visible to user-space. It should be the same as in imx6dl-victgo.dtsi. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- arch/arm/boot/dts/imx6qdl-vicut1.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi index b7a705b39178..a5f962f1028b 100644 --- a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi @@ -92,14 +92,14 @@ leds { led-0 { label = "debug0"; function = LED_FUNCTION_HEARTBEAT; - gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; led-1 { label = "debug1"; function = LED_FUNCTION_DISK; - gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; linux,default-trigger = "disk-activity"; }; -- 2.30.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Oleksij Rempel <o.rempel@pengutronix.de> To: Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org> Cc: David Jander <david@protonic.nl>, Oleksij Rempel <o.rempel@pengutronix.de>, devicetree@vger.kernel.org, Fabio Estevam <festevam@gmail.com>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, NXP Linux Team <linux-imx@nxp.com>, Pengutronix Kernel Team <kernel@pengutronix.de>, Robin van der Gracht <robin@protonic.nl> Subject: [PATCH v1 06/17] arm: dts: imx6qdl-vicut1.dtsi: Fix debug LED gpio pins Date: Tue, 12 Apr 2022 09:39:53 +0200 [thread overview] Message-ID: <20220412074004.2485264-7-o.rempel@pengutronix.de> (raw) In-Reply-To: <20220412074004.2485264-1-o.rempel@pengutronix.de> From: David Jander <david@protonic.nl> While there are LEDs connected on some variants on GPIO4 pins 16 and 17, those are not the debug LEDs that should be visible to user-space. It should be the same as in imx6dl-victgo.dtsi. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- arch/arm/boot/dts/imx6qdl-vicut1.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi index b7a705b39178..a5f962f1028b 100644 --- a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi +++ b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi @@ -92,14 +92,14 @@ leds { led-0 { label = "debug0"; function = LED_FUNCTION_HEARTBEAT; - gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; led-1 { label = "debug1"; function = LED_FUNCTION_DISK; - gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; linux,default-trigger = "disk-activity"; }; -- 2.30.2
next prev parent reply other threads:[~2022-04-12 7:42 UTC|newest] Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-04-12 7:39 [PATCH v1 00/17] protonic fixes Oleksij Rempel 2022-04-12 7:39 ` Oleksij Rempel 2022-04-12 7:39 ` [PATCH v1 01/17] arm: dts: imx6qdl-vicut1.dtsi: remove TiWi module Oleksij Rempel 2022-04-12 7:39 ` Oleksij Rempel 2022-04-18 11:49 ` Shawn Guo 2022-04-18 11:49 ` Shawn Guo 2022-04-12 7:39 ` [PATCH v1 02/17] arm: dts: imx6qdl-vicut1.dtsi: Put nON_SWITCH in own pinctrl grp Oleksij Rempel 2022-04-12 7:39 ` Oleksij Rempel 2022-04-12 7:39 ` [PATCH v1 03/17] arm: dts: imx6qdl-vicut1.dtsi: Remove PCIe Oleksij Rempel 2022-04-12 7:39 ` Oleksij Rempel 2022-04-12 7:39 ` [PATCH v1 04/17] arm: dts: imx6qdl-vicut1/victgo: Remove UART2 Oleksij Rempel 2022-04-12 7:39 ` Oleksij Rempel 2022-04-12 7:39 ` [PATCH v1 05/17] arm: dts: imx6qdl-vicut1.dtsi: Fix LED names Oleksij Rempel 2022-04-12 7:39 ` Oleksij Rempel 2022-04-12 7:39 ` Oleksij Rempel [this message] 2022-04-12 7:39 ` [PATCH v1 06/17] arm: dts: imx6qdl-vicut1.dtsi: Fix debug LED gpio pins Oleksij Rempel 2022-04-12 7:39 ` [PATCH v1 07/17] arm: dts: imx6qdl-vicut1.dtsi: Update GPIO line names Oleksij Rempel 2022-04-12 7:39 ` Oleksij Rempel 2022-04-12 7:39 ` [PATCH v1 08/17] arm: dts: imx6qdl-vicut1.dtsi: Remove conflicting pinctrl entry Oleksij Rempel 2022-04-12 7:39 ` Oleksij Rempel 2022-04-12 7:39 ` [PATCH v1 09/17] arm: dts: imx6q-vicut1.dts: remove sata node Oleksij Rempel 2022-04-12 7:39 ` Oleksij Rempel 2022-04-18 11:53 ` Shawn Guo 2022-04-18 11:53 ` Shawn Guo 2022-04-12 7:39 ` [PATCH v1 10/17] arm: dts: imx6dl-victgo.dts: update gpio names Oleksij Rempel 2022-04-12 7:39 ` Oleksij Rempel 2022-04-12 7:39 ` [PATCH v1 11/17] arm: dts: imx6dl-victgo.dts: Factor out common parts to imx6qdl-victgo.dtsi Oleksij Rempel 2022-04-12 7:39 ` Oleksij Rempel 2022-04-12 7:39 ` [PATCH v1 12/17] arm: dts: imx6qdl-vicut1.dtsi: Move some node out to DTS files Oleksij Rempel 2022-04-12 7:39 ` Oleksij Rempel 2022-04-12 7:40 ` [PATCH v1 13/17] arm: dts: Remove imx6qdl-victgo.dtsi Oleksij Rempel 2022-04-12 7:40 ` Oleksij Rempel 2022-04-12 7:40 ` [PATCH v1 14/17] arm: dts: imx6qdl-vicut1: Factor out common parts of 12inch board variants Oleksij Rempel 2022-04-12 7:40 ` Oleksij Rempel 2022-04-12 7:40 ` [PATCH v1 15/17] arm: dts: imx6dl-victgo.dts: Remove touchscreen x axis inversion Oleksij Rempel 2022-04-12 7:40 ` Oleksij Rempel 2022-04-12 7:40 ` [PATCH v1 16/17] arm: dts: imx6qdl-vicut1.dtsi: Add missing ISB led node Oleksij Rempel 2022-04-12 7:40 ` Oleksij Rempel 2022-04-12 7:40 ` [PATCH v1 17/17] arm: dts: imx6qdl-vicut1.dtsi: add thermal zone and attach tmp103 to it Oleksij Rempel 2022-04-12 7:40 ` Oleksij Rempel 2022-04-18 11:48 ` [PATCH v1 00/17] protonic fixes Shawn Guo 2022-04-18 11:48 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220412074004.2485264-7-o.rempel@pengutronix.de \ --to=o.rempel@pengutronix.de \ --cc=david@protonic.nl \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=robin@protonic.nl \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.