[PATCH v9 0/9] RZN1 DMA support

[PATCH v9 0/9] RZN1 DMA support

[Miquel Raynal]

Hello,

Here is a first series bringing DMA support to RZN1 platforms. Soon a
second series will come with changes made to the UART controller
driver, in order to interact with the RZN1 DMA controller.

Stephen acked the sysctrl patch (in the clk driver) but as this series
is a base for more canges (serial, RTC), it would be best to merge
everything through the Renesas trees. So, maintainers, if you agree with
it, your acks are welcome.

Cheers,
Miquèl

Changes in v9:
* Collected more tags.
* Changed a u32 into a regular bitmap and used the bitmap API.
* Reordered two function calls to save one extra line.
* Added a define to avoid a magic value.

Changes in v8:
* Collected more tags.
* Moved the Makefile line adding the dmamux driver to the bottom of the
  file.
* Reversed the logic in a ternary operation as suggested by Andy.
* Changed a bit the naming of a #define as suggested by Andy.

Changes in v7:
* This time, really added Stephen's Acks (sorry for the error).
* Moved an error check to get rid of one mutex_unlock/lock call as
  suggested by Ilpo.
* Split the patch adding the dmamux driver as advised by Vinod. One
  patch introduces the dmamux driver, the other populates the children
  of the system controller. As the original patch got acked by Stephen
  Boyd, I moved his tag to the patch touching the clock controller only.

Changes in v6:
* Added Stephen's acks.
* Fixed an extra newline added in the middle of nowhere.
* Rebased on top of v5.18-rc1.

Changes in v5:
* Used gotos in rzn1_dmamux_route_allocate().
* Changed the prefix to "dmaengine:".
* Dropped the partial transfers fix.
* Added Rob's acks.

Changes in v4:
* Freed "map" in the error path of the dmamux driver.
* Improved a bit the style as requested by Prabhakar.
* Dropped a __maybe_unused.
* Reorder the includes.
* Added a dependency on ARCH_RZN1.
* Added Rob's Ack.
* Added a reg property to the dmamux binding file.
* Referenced the dmamux binding from the system controller file.
* Called of_platform_populate from the end of the system controller
  (clock) driver probe in order to probe the dmamux if it was
  populated.
* Added DMA properties to all the relevant UARTs.

Changes in v3:
* Added Reviewed-by tags.
* Exported the set_dmamux* symbol properly.
* Dropped a useless check in the probe and moved the sysctrl_priv
  assignation to the end of the probe.
* Renamed the dmamux driver
* Added a couple of missing MODULE_ macros in the dmamux driver.
* Decided to use a regular platform init call instead of the
  arch_initcall() initially proposed.
* s/%d/%u/ in printk's when appropriate.
* Used a hardcoded value instead of dmamux->dmac_requests when
  appropriate.
* Changed the variable name "master" to "dmac_idx" to be more
  descriptive.
* Dropped most of the of_* calls in favor of #define's.
* Fixed a typo.
* Exported two symbols from 8250_dma.c.

Changes in v2:
* Clarified that the 'fix' regarding non aligned reads would only apply
  to the DEV_TO_MEM case.
* Fix the DMA controller compatible string (copy-paste error).
* s/syscon/sysctrl/ as advised by Geert.
* Disabled irqs when taking the spinlock from the clocks driver.
* Moved the DMAMUX offset inside the driver.
* Removed extra commas.
* Improved the style as suggested by Andy.
* Removed a dupplicated check against the device node presence.
* Reduced the number of lines of code by using dev_err_probe().
* Created a Kconfig symbol for DMAMUX to fix the two robot reports
  received and be sure there was no useless overhead with other
  platforms.
* Exported the serial8250_{tx,rx}_dma() symbols.

Miquel Raynal (9):
  dt-bindings: dmaengine: Introduce RZN1 dmamux bindings
  dt-bindings: clock: r9a06g032-sysctrl: Reference the DMAMUX subnode
  dt-bindings: dmaengine: Introduce RZN1 DMA compatible
  soc: renesas: rzn1-sysc: Export function to set dmamux
  dmaengine: dw: dmamux: Introduce RZN1 DMA router support
  clk: renesas: r9a06g032: Probe possible children
  dmaengine: dw: Add RZN1 compatible
  ARM: dts: r9a06g032: Add the two DMA nodes
  ARM: dts: r9a06g032: Describe the DMA router

 .../clock/renesas,r9a06g032-sysctrl.yaml      |  11 ++
 .../bindings/dma/renesas,rzn1-dmamux.yaml     |  51 ++++++
 .../bindings/dma/snps,dma-spear1340.yaml      |   8 +-
 MAINTAINERS                                   |   1 +
 arch/arm/boot/dts/r9a06g032.dtsi              |  40 +++++
 drivers/clk/renesas/r9a06g032-clocks.c        |  36 +++-
 drivers/dma/dw/Kconfig                        |   9 +
 drivers/dma/dw/Makefile                       |   2 +
 drivers/dma/dw/platform.c                     |   1 +
 drivers/dma/dw/rzn1-dmamux.c                  | 163 ++++++++++++++++++
 include/linux/soc/renesas/r9a06g032-sysctrl.h |  11 ++
 11 files changed, 331 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.yaml
 create mode 100644 drivers/dma/dw/rzn1-dmamux.c
 create mode 100644 include/linux/soc/renesas/r9a06g032-sysctrl.h

-- 
2.27.0

[PATCH v9 1/9] dt-bindings: dmaengine: Introduce RZN1 dmamux bindings

[Miquel Raynal]

The Renesas RZN1 DMA IP is based on a DW core, with eg. an additional
dmamux register located in the system control area which can take up to
32 requests (16 per DMA controller). Each DMA channel can be wired to
two different peripherals.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/dma/renesas,rzn1-dmamux.yaml     | 51 +++++++++++++++++++
 MAINTAINERS                                   |  1 +
 2 files changed, 52 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.yaml

diff --git a/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.yaml b/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.yaml
new file mode 100644
index 000000000000..d83013b0dd74
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/renesas,rzn1-dmamux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/N1 DMA mux
+
+maintainers:
+  - Miquel Raynal <miquel.raynal@bootlin.com>
+
+allOf:
+  - $ref: "dma-router.yaml#"
+
+properties:
+  compatible:
+    const: renesas,rzn1-dmamux
+
+  reg:
+    maxItems: 1
+    description: DMA mux first register offset within the system control parent.
+
+  '#dma-cells':
+    const: 6
+    description:
+      The first four cells are dedicated to the master DMA controller. The fifth
+      cell gives the DMA mux bit index that must be set starting from 0. The
+      sixth cell gives the binary value that must be written there, ie. 0 or 1.
+
+  dma-masters:
+    minItems: 1
+    maxItems: 2
+
+  dma-requests:
+    const: 32
+
+required:
+  - reg
+  - dma-requests
+
+additionalProperties: false
+
+examples:
+  - |
+    dma-router@a0 {
+      compatible = "renesas,rzn1-dmamux";
+      reg = <0xa0 4>;
+      #dma-cells = <6>;
+      dma-masters = <&dma0 &dma1>;
+      dma-requests = <32>;
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index fd768d43e048..120d3ae57a4b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19040,6 +19040,7 @@ SYNOPSYS DESIGNWARE DMAC DRIVER
 M:	Viresh Kumar <vireshk@kernel.org>
 R:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
 S:	Maintained
+F:	Documentation/devicetree/bindings/dma/renesas,rzn1-dmamux.yaml
 F:	Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml
 F:	drivers/dma/dw/
 F:	include/dt-bindings/dma/dw-dmac.h
-- 
2.27.0

[PATCH v9 2/9] dt-bindings: clock: r9a06g032-sysctrl: Reference the DMAMUX subnode

[Miquel Raynal]

This system controller contains several registers that have nothing to
do with the clock handling, like the DMA mux register. Describe this
part of the system controller as a subnode.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
---
 .../bindings/clock/renesas,r9a06g032-sysctrl.yaml     | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml
index 25dbb0fac065..95bf485c6cec 100644
--- a/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml
+++ b/Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.yaml
@@ -39,6 +39,17 @@ properties:
   '#power-domain-cells':
     const: 0
 
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+patternProperties:
+  "^dma-router@[a-f0-9]+$":
+    type: object
+    $ref: "../dma/renesas,rzn1-dmamux.yaml#"
+
 required:
   - compatible
   - reg
-- 
2.27.0

[PATCH v9 3/9] dt-bindings: dmaengine: Introduce RZN1 DMA compatible

[Miquel Raynal]

Just like for the NAND controller that is also on this SoC, let's
provide a SoC generic and a more specific couple of compatibles for the
DMA controller.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/dma/snps,dma-spear1340.yaml       | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml
index 6b35089ac017..c13649bf7f19 100644
--- a/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml
+++ b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml
@@ -15,7 +15,13 @@ allOf:
 
 properties:
   compatible:
-    const: snps,dma-spear1340
+    oneOf:
+      - const: snps,dma-spear1340
+      - items:
+          - enum:
+              - renesas,r9a06g032-dma
+          - const: renesas,rzn1-dma
+
 
   "#dma-cells":
     minimum: 3
-- 
2.27.0

[PATCH v9 4/9] soc: renesas: rzn1-sysc: Export function to set dmamux

[Miquel Raynal]

The dmamux register is located within the system controller.

Without syscon, we need an extra helper in order to give write access to
this register to a dmamux driver.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/renesas/r9a06g032-clocks.c        | 35 ++++++++++++++++++-
 include/linux/soc/renesas/r9a06g032-sysctrl.h | 11 ++++++
 2 files changed, 45 insertions(+), 1 deletion(-)
 create mode 100644 include/linux/soc/renesas/r9a06g032-sysctrl.h

diff --git a/drivers/clk/renesas/r9a06g032-clocks.c b/drivers/clk/renesas/r9a06g032-clocks.c
index c99942f0e4d4..052d99059981 100644
--- a/drivers/clk/renesas/r9a06g032-clocks.c
+++ b/drivers/clk/renesas/r9a06g032-clocks.c
@@ -20,9 +20,12 @@
 #include <linux/pm_clock.h>
 #include <linux/pm_domain.h>
 #include <linux/slab.h>
+#include <linux/soc/renesas/r9a06g032-sysctrl.h>
 #include <linux/spinlock.h>
 #include <dt-bindings/clock/r9a06g032-sysctrl.h>
 
+#define R9A06G032_SYSCTRL_DMAMUX 0xA0
+
 struct r9a06g032_gate {
 	u16 gate, reset, ready, midle,
 		scon, mirack, mistat;
@@ -315,6 +318,30 @@ struct r9a06g032_priv {
 	void __iomem *reg;
 };
 
+static struct r9a06g032_priv *sysctrl_priv;
+
+/* Exported helper to access the DMAMUX register */
+int r9a06g032_sysctrl_set_dmamux(u32 mask, u32 val)
+{
+	unsigned long flags;
+	u32 dmamux;
+
+	if (!sysctrl_priv)
+		return -EPROBE_DEFER;
+
+	spin_lock_irqsave(&sysctrl_priv->lock, flags);
+
+	dmamux = readl(sysctrl_priv->reg + R9A06G032_SYSCTRL_DMAMUX);
+	dmamux &= ~mask;
+	dmamux |= val & mask;
+	writel(dmamux, sysctrl_priv->reg + R9A06G032_SYSCTRL_DMAMUX);
+
+	spin_unlock_irqrestore(&sysctrl_priv->lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(r9a06g032_sysctrl_set_dmamux);
+
 /* register/bit pairs are encoded as an uint16_t */
 static void
 clk_rdesc_set(struct r9a06g032_priv *clocks,
@@ -963,7 +990,13 @@ static int __init r9a06g032_clocks_probe(struct platform_device *pdev)
 	if (error)
 		return error;
 
-	return r9a06g032_add_clk_domain(dev);
+	error = r9a06g032_add_clk_domain(dev);
+	if (error)
+		return error;
+
+	sysctrl_priv = clocks;
+
+	return 0;
 }
 
 static const struct of_device_id r9a06g032_match[] = {
diff --git a/include/linux/soc/renesas/r9a06g032-sysctrl.h b/include/linux/soc/renesas/r9a06g032-sysctrl.h
new file mode 100644
index 000000000000..066dfb15cbdd
--- /dev/null
+++ b/include/linux/soc/renesas/r9a06g032-sysctrl.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __LINUX_SOC_RENESAS_R9A06G032_SYSCTRL_H__
+#define __LINUX_SOC_RENESAS_R9A06G032_SYSCTRL_H__
+
+#ifdef CONFIG_CLK_R9A06G032
+int r9a06g032_sysctrl_set_dmamux(u32 mask, u32 val);
+#else
+static inline int r9a06g032_sysctrl_set_dmamux(u32 mask, u32 val) { return -ENODEV; }
+#endif
+
+#endif /* __LINUX_SOC_RENESAS_R9A06G032_SYSCTRL_H__ */
-- 
2.27.0

[PATCH v9 5/9] dmaengine: dw: dmamux: Introduce RZN1 DMA router support

[Miquel Raynal]

The Renesas RZN1 DMA IP is based on a DW core, with eg. an additional
dmamux register located in the system control area which can take up to
32 requests (16 per DMA controller). Each DMA channel can be wired to
two different peripherals.

We need two additional information from the 'dmas' property: the channel
(bit in the dmamux register) that must be accessed and the value of the
mux for this channel.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 drivers/dma/dw/Kconfig       |   9 ++
 drivers/dma/dw/Makefile      |   2 +
 drivers/dma/dw/rzn1-dmamux.c | 163 +++++++++++++++++++++++++++++++++++
 3 files changed, 174 insertions(+)
 create mode 100644 drivers/dma/dw/rzn1-dmamux.c

diff --git a/drivers/dma/dw/Kconfig b/drivers/dma/dw/Kconfig
index db25f9b7778c..a9828ddd6d06 100644
--- a/drivers/dma/dw/Kconfig
+++ b/drivers/dma/dw/Kconfig
@@ -16,6 +16,15 @@ config DW_DMAC
 	  Support the Synopsys DesignWare AHB DMA controller. This
 	  can be integrated in chips such as the Intel Cherrytrail.
 
+config RZN1_DMAMUX
+	tristate "Renesas RZ/N1 DMAMUX driver"
+	depends on DW_DMAC
+	depends on ARCH_RZN1 || COMPILE_TEST
+	help
+	  Support the Renesas RZ/N1 DMAMUX which is located in front of
+	  the Synopsys DesignWare AHB DMA controller located on Renesas
+	  SoCs.
+
 config DW_DMAC_PCI
 	tristate "Synopsys DesignWare AHB DMA PCI driver"
 	depends on PCI
diff --git a/drivers/dma/dw/Makefile b/drivers/dma/dw/Makefile
index a6f358ad8591..e1796015f213 100644
--- a/drivers/dma/dw/Makefile
+++ b/drivers/dma/dw/Makefile
@@ -9,3 +9,5 @@ dw_dmac-$(CONFIG_OF)		+= of.o
 
 obj-$(CONFIG_DW_DMAC_PCI)	+= dw_dmac_pci.o
 dw_dmac_pci-y			:= pci.o
+
+obj-$(CONFIG_RZN1_DMAMUX)	+= rzn1-dmamux.o
diff --git a/drivers/dma/dw/rzn1-dmamux.c b/drivers/dma/dw/rzn1-dmamux.c
new file mode 100644
index 000000000000..4d6f2f6d98d0
--- /dev/null
+++ b/drivers/dma/dw/rzn1-dmamux.c
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 Schneider-Electric
+ * Author: Miquel Raynal <miquel.raynal@bootlin.com
+ * Based on TI crossbar driver written by Peter Ujfalusi <peter.ujfalusi@ti.com>
+ */
+#include <linux/of_device.h>
+#include <linux/of_dma.h>
+#include <linux/slab.h>
+#include <linux/soc/renesas/r9a06g032-sysctrl.h>
+
+#define RNZ1_DMAMUX_NCELLS 6
+#define RZN1_DMAMUX_LINES 64
+#define RZN1_DMAMUX_MAX_LINES 16
+
+struct rzn1_dmamux_data {
+	struct dma_router dmarouter;
+	unsigned long *used_chans;
+	struct mutex lock;
+};
+
+struct rzn1_dmamux_map {
+	unsigned int req_idx;
+};
+
+static void rzn1_dmamux_free(struct device *dev, void *route_data)
+{
+	struct rzn1_dmamux_data *dmamux = dev_get_drvdata(dev);
+	struct rzn1_dmamux_map *map = route_data;
+
+	dev_dbg(dev, "Unmapping DMAMUX request %u\n", map->req_idx);
+
+	mutex_lock(&dmamux->lock);
+	clear_bit(BIT(map->req_idx), dmamux->used_chans);
+	mutex_unlock(&dmamux->lock);
+
+	kfree(map);
+}
+
+static void *rzn1_dmamux_route_allocate(struct of_phandle_args *dma_spec,
+					struct of_dma *ofdma)
+{
+	struct platform_device *pdev = of_find_device_by_node(ofdma->of_node);
+	struct rzn1_dmamux_data *dmamux = platform_get_drvdata(pdev);
+	struct rzn1_dmamux_map *map;
+	unsigned int dmac_idx, chan, val;
+	u32 mask;
+	int ret;
+
+	if (dma_spec->args_count != RNZ1_DMAMUX_NCELLS)
+		return ERR_PTR(-EINVAL);
+
+	map = kzalloc(sizeof(*map), GFP_KERNEL);
+	if (!map)
+		return ERR_PTR(-ENOMEM);
+
+	chan = dma_spec->args[0];
+	map->req_idx = dma_spec->args[4];
+	val = dma_spec->args[5];
+	dma_spec->args_count -= 2;
+
+	if (chan >= RZN1_DMAMUX_MAX_LINES) {
+		dev_err(&pdev->dev, "Invalid DMA request line: %u\n", chan);
+		ret = -EINVAL;
+		goto free_map;
+	}
+
+	if (map->req_idx >= RZN1_DMAMUX_LINES ||
+	    (map->req_idx % RZN1_DMAMUX_MAX_LINES) != chan) {
+		dev_err(&pdev->dev, "Invalid MUX request line: %u\n", map->req_idx);
+		ret = -EINVAL;
+		goto free_map;
+	}
+
+	dmac_idx = map->req_idx >= RZN1_DMAMUX_MAX_LINES ? 1 : 0;
+	dma_spec->np = of_parse_phandle(ofdma->of_node, "dma-masters", dmac_idx);
+	if (!dma_spec->np) {
+		dev_err(&pdev->dev, "Can't get DMA master\n");
+		ret = -EINVAL;
+		goto free_map;
+	}
+
+	dev_dbg(&pdev->dev, "Mapping DMAMUX request %u to DMAC%u request %u\n",
+		map->req_idx, dmac_idx, chan);
+
+	mask = BIT(map->req_idx);
+
+	mutex_lock(&dmamux->lock);
+	ret = r9a06g032_sysctrl_set_dmamux(mask, val ? mask : 0);
+	if (ret)
+		goto unlock;
+
+	set_bit(mask, dmamux->used_chans);
+	mutex_unlock(&dmamux->lock);
+
+	return map;
+
+unlock:
+	mutex_unlock(&dmamux->lock);
+free_map:
+	kfree(map);
+
+	return ERR_PTR(ret);
+}
+
+static const struct of_device_id rzn1_dmac_match[] = {
+	{ .compatible = "renesas,rzn1-dma" },
+	{}
+};
+
+static int rzn1_dmamux_probe(struct platform_device *pdev)
+{
+	struct device_node *mux_node = pdev->dev.of_node;
+	const struct of_device_id *match;
+	struct device_node *dmac_node;
+	struct rzn1_dmamux_data *dmamux;
+
+	dmamux = devm_kzalloc(&pdev->dev, sizeof(*dmamux), GFP_KERNEL);
+	if (!dmamux)
+		return -ENOMEM;
+
+	dmamux->used_chans = devm_bitmap_zalloc(&pdev->dev, 2 * RZN1_DMAMUX_MAX_LINES,
+						GFP_KERNEL);
+	if (!dmamux->used_chans)
+		return -ENOMEM;
+
+	mutex_init(&dmamux->lock);
+
+	dmac_node = of_parse_phandle(mux_node, "dma-masters", 0);
+	if (!dmac_node)
+		return dev_err_probe(&pdev->dev, -ENODEV, "Can't get DMA master node\n");
+
+	match = of_match_node(rzn1_dmac_match, dmac_node);
+	of_node_put(dmac_node);
+	if (!match)
+		return dev_err_probe(&pdev->dev, -EINVAL, "DMA master is not supported\n");
+
+	dmamux->dmarouter.dev = &pdev->dev;
+	dmamux->dmarouter.route_free = rzn1_dmamux_free;
+
+	platform_set_drvdata(pdev, dmamux);
+
+	return of_dma_router_register(mux_node, rzn1_dmamux_route_allocate,
+				      &dmamux->dmarouter);
+}
+
+static const struct of_device_id rzn1_dmamux_match[] = {
+	{ .compatible = "renesas,rzn1-dmamux" },
+	{}
+};
+
+static struct platform_driver rzn1_dmamux_driver = {
+	.driver = {
+		.name = "renesas,rzn1-dmamux",
+		.of_match_table = rzn1_dmamux_match,
+	},
+	.probe	= rzn1_dmamux_probe,
+};
+module_platform_driver(rzn1_dmamux_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Miquel Raynal <miquel.raynal@bootlin.com");
+MODULE_DESCRIPTION("Renesas RZ/N1 DMAMUX driver");
-- 
2.27.0

[PATCH v9 6/9] clk: renesas: r9a06g032: Probe possible children

[Miquel Raynal]

The clock controller device on r9a06g032 takes all the memory range that
is described as being a system controller. This range contains many
different (unrelated?) registers besides the ones belonging to the clock
controller, that can necessitate to be accessed from other peripherals.

For instance, the dmamux registers are there. The dmamux "device" will
be described as a child node of the clock/system controller node, which
means we need the top device driver (the clock controller driver in this
case) to populate its children manually.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
---
 drivers/clk/renesas/r9a06g032-clocks.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/renesas/r9a06g032-clocks.c b/drivers/clk/renesas/r9a06g032-clocks.c
index 052d99059981..1df56d7ab3e1 100644
--- a/drivers/clk/renesas/r9a06g032-clocks.c
+++ b/drivers/clk/renesas/r9a06g032-clocks.c
@@ -16,6 +16,7 @@
 #include <linux/math64.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/pm_clock.h>
 #include <linux/pm_domain.h>
@@ -996,7 +997,7 @@ static int __init r9a06g032_clocks_probe(struct platform_device *pdev)
 
 	sysctrl_priv = clocks;
 
-	return 0;
+	return of_platform_populate(np, NULL, NULL, dev);
 }
 
 static const struct of_device_id r9a06g032_match[] = {
-- 
2.27.0

[PATCH v9 7/9] dmaengine: dw: Add RZN1 compatible

[Miquel Raynal]

The Renesas RZN1 DMA IP is very close to the original DW DMA IP, a DMA
router has been introduced to handle the wiring options that have been
added.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/dma/dw/platform.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/dma/dw/platform.c b/drivers/dma/dw/platform.c
index 246118955877..47f2292dba98 100644
--- a/drivers/dma/dw/platform.c
+++ b/drivers/dma/dw/platform.c
@@ -137,6 +137,7 @@ static void dw_shutdown(struct platform_device *pdev)
 #ifdef CONFIG_OF
 static const struct of_device_id dw_dma_of_id_table[] = {
 	{ .compatible = "snps,dma-spear1340", .data = &dw_dma_chip_pdata },
+	{ .compatible = "renesas,rzn1-dma", .data = &dw_dma_chip_pdata },
 	{}
 };
 MODULE_DEVICE_TABLE(of, dw_dma_of_id_table);
-- 
2.27.0

[PATCH v9 8/9] ARM: dts: r9a06g032: Add the two DMA nodes

[Miquel Raynal]

Describe the two DMA controllers available on this SoC.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/r9a06g032.dtsi | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi
index 636a6ab31c58..839580ec21ee 100644
--- a/arch/arm/boot/dts/r9a06g032.dtsi
+++ b/arch/arm/boot/dts/r9a06g032.dtsi
@@ -200,6 +200,36 @@ nand_controller: nand-controller@40102000 {
 			status = "disabled";
 		};
 
+		dma0: dma-controller@40104000 {
+			compatible = "renesas,r9a06g032-dma", "renesas,rzn1-dma";
+			reg = <0x40104000 0x1000>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "hclk";
+			clocks = <&sysctrl R9A06G032_HCLK_DMA0>;
+			dma-channels = <8>;
+			dma-requests = <16>;
+			dma-masters = <1>;
+			#dma-cells = <3>;
+			block_size = <0xfff>;
+			data_width = <3>;
+			status = "disabled";
+		};
+
+		dma1: dma-controller@40105000 {
+			compatible = "renesas,r9a06g032-dma", "renesas,rzn1-dma";
+			reg = <0x40105000 0x1000>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "hclk";
+			clocks = <&sysctrl R9A06G032_HCLK_DMA1>;
+			dma-channels = <8>;
+			dma-requests = <16>;
+			dma-masters = <1>;
+			#dma-cells = <3>;
+			block_size = <0xfff>;
+			data_width = <3>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@44101000 {
 			compatible = "arm,gic-400", "arm,cortex-a7-gic";
 			interrupt-controller;
-- 
2.27.0

[PATCH v9 9/9] ARM: dts: r9a06g032: Describe the DMA router

[Miquel Raynal]

There is a dmamux on this SoC which allows picking two different sources
for a single DMA request.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 arch/arm/boot/dts/r9a06g032.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi
index 839580ec21ee..c854aa4cfa77 100644
--- a/arch/arm/boot/dts/r9a06g032.dtsi
+++ b/arch/arm/boot/dts/r9a06g032.dtsi
@@ -91,6 +91,16 @@ sysctrl: system-controller@4000c000 {
 			clocks = <&ext_mclk>, <&ext_rtc_clk>,
 					<&ext_jtag_clk>, <&ext_rgmii_ref>;
 			clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			dmamux: dma-router@a0 {
+				compatible = "renesas,rzn1-dmamux";
+				reg = <0xa0 4>;
+				#dma-cells = <6>;
+				dma-requests = <32>;
+				dma-masters = <&dma0 &dma1>;
+			};
 		};
 
 		uart0: serial@40060000 {
-- 
2.27.0

Re: [PATCH v9 5/9] dmaengine: dw: dmamux: Introduce RZN1 DMA router support

[Andy Shevchenko]

On Tue, Apr 12, 2022 at 12:21:34PM +0200, Miquel Raynal wrote:
> The Renesas RZN1 DMA IP is based on a DW core, with eg. an additional
> dmamux register located in the system control area which can take up to
> 32 requests (16 per DMA controller). Each DMA channel can be wired to
> two different peripherals.
> 
> We need two additional information from the 'dmas' property: the channel
> (bit in the dmamux register) that must be accessed and the value of the
> mux for this channel.

...

Some headers are absent, e.g.: types.h, bitops.h.

> +#include <linux/of_device.h>
> +#include <linux/of_dma.h>
> +#include <linux/slab.h>

...

> +	mutex_lock(&dmamux->lock);
> +	clear_bit(BIT(map->req_idx), dmamux->used_chans);

Why do you need atomic bit operation here _and_ mutex?

> +	mutex_unlock(&dmamux->lock);

Ditto for the rest similar cases.

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v9 5/9] dmaengine: dw: dmamux: Introduce RZN1 DMA router support

[Andy Shevchenko]

On Tue, Apr 12, 2022 at 02:06:31PM +0300, Andy Shevchenko wrote:
> On Tue, Apr 12, 2022 at 12:21:34PM +0200, Miquel Raynal wrote:

...

> > +	clear_bit(BIT(map->req_idx), dmamux->used_chans);

On top of the previously asked, are you sure the use of BIT() is correct here?

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v9 1/9] dt-bindings: dmaengine: Introduce RZN1 dmamux bindings

[Vinod Koul]

On 12-04-22, 12:21, Miquel Raynal wrote:
> The Renesas RZN1 DMA IP is based on a DW core, with eg. an additional
> dmamux register located in the system control area which can take up to
> 32 requests (16 per DMA controller). Each DMA channel can be wired to
> two different peripherals.

Acked-By: Vinod Koul <vkoul@kernel.org>

-- 
~Vinod

Re: [PATCH v9 3/9] dt-bindings: dmaengine: Introduce RZN1 DMA compatible

[Vinod Koul]

On 12-04-22, 12:21, Miquel Raynal wrote:
> Just like for the NAND controller that is also on this SoC, let's
> provide a SoC generic and a more specific couple of compatibles for the
> DMA controller.

Acked-By: Vinod Koul <vkoul@kernel.org>

-- 
~Vinod

Re: [PATCH v9 7/9] dmaengine: dw: Add RZN1 compatible

[Vinod Koul]

On 12-04-22, 12:21, Miquel Raynal wrote:
> The Renesas RZN1 DMA IP is very close to the original DW DMA IP, a DMA
> router has been introduced to handle the wiring options that have been
> added.

Acked-By: Vinod Koul <vkoul@kernel.org>

-- 
~Vinod

Re: [PATCH v9 5/9] dmaengine: dw: dmamux: Introduce RZN1 DMA router support

[Miquel Raynal]

Hi Andy,

andriy.shevchenko@linux.intel.com wrote on Tue, 12 Apr 2022 14:08:33
+0300:

> On Tue, Apr 12, 2022 at 02:06:31PM +0300, Andy Shevchenko wrote:
> > On Tue, Apr 12, 2022 at 12:21:34PM +0200, Miquel Raynal wrote:  
> 
> ...
> 
> > > +	clear_bit(BIT(map->req_idx), dmamux->used_chans);  
> 
> On top of the previously asked, are you sure the use of BIT() is correct here?

Looks like I have been tricked by the doc...

	* DOC: bitmap bitops
	*  set_bit(bit, addr)                  *addr |= bit
	*  clear_bit(bit, addr)                *addr &= ~bit

Re: [PATCH v9 5/9] dmaengine: dw: dmamux: Introduce RZN1 DMA router support

[Miquel Raynal]

Hi Andy,

andriy.shevchenko@linux.intel.com wrote on Tue, 12 Apr 2022 14:06:30
+0300:

> On Tue, Apr 12, 2022 at 12:21:34PM +0200, Miquel Raynal wrote:
> > The Renesas RZN1 DMA IP is based on a DW core, with eg. an additional
> > dmamux register located in the system control area which can take up to
> > 32 requests (16 per DMA controller). Each DMA channel can be wired to
> > two different peripherals.
> > 
> > We need two additional information from the 'dmas' property: the channel
> > (bit in the dmamux register) that must be accessed and the value of the
> > mux for this channel.  
> 
> ...
> 
> Some headers are absent, e.g.: types.h, bitops.h.
> 
> > +#include <linux/of_device.h>
> > +#include <linux/of_dma.h>
> > +#include <linux/slab.h>  
> 
> ...
> 
> > +	mutex_lock(&dmamux->lock);
> > +	clear_bit(BIT(map->req_idx), dmamux->used_chans);  
> 
> Why do you need atomic bit operation here _and_ mutex?
> 
> > +	mutex_unlock(&dmamux->lock);  
> 
> Ditto for the rest similar cases.

We no longer need the lock however I re-ordered things like they were
before because I need to add a check on the bitmap when setting the bit
and this must be done before touching the dmamux registers.

Thanks,
Miquèl