[PATCH] wl18xx: debugfs: using pm_runtime_resume_and_get instead of pm_runtime_get_sync

[PATCH] wl18xx: debugfs: using pm_runtime_resume_and_get instead of pm_runtime_get_sync

[cgel.zte]

From: Minghao Chi <chi.minghao@zte.com.cn>

Using pm_runtime_resume_and_get is more appropriate
for simplifing code

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
---
 drivers/net/wireless/ti/wl18xx/debugfs.c | 18 ++++++------------
 1 file changed, 6 insertions(+), 12 deletions(-)

diff --git a/drivers/net/wireless/ti/wl18xx/debugfs.c b/drivers/net/wireless/ti/wl18xx/debugfs.c
index 2f921a44f1e2..80fbf740fe6d 100644
--- a/drivers/net/wireless/ti/wl18xx/debugfs.c
+++ b/drivers/net/wireless/ti/wl18xx/debugfs.c
@@ -264,11 +264,9 @@ static ssize_t radar_detection_write(struct file *file,
 	if (unlikely(wl->state != WLCORE_STATE_ON))
 		goto out;
 
-	ret = pm_runtime_get_sync(wl->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(wl->dev);
+	ret = pm_runtime_resume_and_get(wl->dev);
+	if (ret < 0)
 		goto out;
-	}
 
 	ret = wl18xx_cmd_radar_detection_debug(wl, channel);
 	if (ret < 0)
@@ -306,11 +304,9 @@ static ssize_t dynamic_fw_traces_write(struct file *file,
 	if (unlikely(wl->state != WLCORE_STATE_ON))
 		goto out;
 
-	ret = pm_runtime_get_sync(wl->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(wl->dev);
+	ret = pm_runtime_resume_and_get(wl->dev);
+	if (ret < 0)
 		goto out;
-	}
 
 	ret = wl18xx_acx_dynamic_fw_traces(wl);
 	if (ret < 0)
@@ -368,11 +364,9 @@ static ssize_t radar_debug_mode_write(struct file *file,
 	if (unlikely(wl->state != WLCORE_STATE_ON))
 		goto out;
 
-	ret = pm_runtime_get_sync(wl->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(wl->dev);
+	ret = pm_runtime_resume_and_get(wl->dev);
+	if (ret < 0)
 		goto out;
-	}
 
 	wl12xx_for_each_wlvif_ap(wl, wlvif) {
 		wlcore_cmd_generic_cfg(wl, wlvif,
-- 
2.25.1

Re: wl18xx: debugfs: use pm_runtime_resume_and_get() instead of pm_runtime_get_sync()

[Kalle Valo]

cgel.zte@gmail.com wrote:

> From: Minghao Chi <chi.minghao@zte.com.cn>
> 
> Using pm_runtime_resume_and_get is more appropriate
> for simplifing code
> 
> Reported-by: Zeal Robot <zealci@zte.com.cn>
> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>

Patch applied to wireless-next.git, thanks.

8e95061b5b9c wl18xx: debugfs: use pm_runtime_resume_and_get() instead of pm_runtime_get_sync()

-- 
https://patchwork.kernel.org/project/linux-wireless/patch/20220413093356.2538192-1-chi.minghao@zte.com.cn/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches