[PATCH] net: restore alpha order to Ethernet devices in config

[PATCH] net: restore alpha order to Ethernet devices in config

[Stephen Hemminger]

The displayed list of Ethernet devices in make menuconfig
has gotten out of order. This is mostly due to changes in vendor
names etc, but also because of new Microsoft entry in wrong place.

This restores so that the display is in order even if the names
of the sub directories are not.

Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
---
 drivers/net/ethernet/Kconfig | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index bd4cb9d7c35d..827993022386 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -35,15 +35,6 @@ source "drivers/net/ethernet/aquantia/Kconfig"
 source "drivers/net/ethernet/arc/Kconfig"
 source "drivers/net/ethernet/asix/Kconfig"
 source "drivers/net/ethernet/atheros/Kconfig"
-source "drivers/net/ethernet/broadcom/Kconfig"
-source "drivers/net/ethernet/brocade/Kconfig"
-source "drivers/net/ethernet/cadence/Kconfig"
-source "drivers/net/ethernet/calxeda/Kconfig"
-source "drivers/net/ethernet/cavium/Kconfig"
-source "drivers/net/ethernet/chelsio/Kconfig"
-source "drivers/net/ethernet/cirrus/Kconfig"
-source "drivers/net/ethernet/cisco/Kconfig"
-source "drivers/net/ethernet/cortina/Kconfig"
 
 config CX_ECAT
 	tristate "Beckhoff CX5020 EtherCAT master support"
@@ -57,6 +48,14 @@ config CX_ECAT
 	  To compile this driver as a module, choose M here. The module
 	  will be called ec_bhf.
 
+source "drivers/net/ethernet/broadcom/Kconfig"
+source "drivers/net/ethernet/cadence/Kconfig"
+source "drivers/net/ethernet/calxeda/Kconfig"
+source "drivers/net/ethernet/cavium/Kconfig"
+source "drivers/net/ethernet/chelsio/Kconfig"
+source "drivers/net/ethernet/cirrus/Kconfig"
+source "drivers/net/ethernet/cisco/Kconfig"
+source "drivers/net/ethernet/cortina/Kconfig"
 source "drivers/net/ethernet/davicom/Kconfig"
 
 config DNET
@@ -85,7 +84,6 @@ source "drivers/net/ethernet/huawei/Kconfig"
 source "drivers/net/ethernet/i825xx/Kconfig"
 source "drivers/net/ethernet/ibm/Kconfig"
 source "drivers/net/ethernet/intel/Kconfig"
-source "drivers/net/ethernet/microsoft/Kconfig"
 source "drivers/net/ethernet/xscale/Kconfig"
 
 config JME
@@ -128,8 +126,9 @@ source "drivers/net/ethernet/mediatek/Kconfig"
 source "drivers/net/ethernet/mellanox/Kconfig"
 source "drivers/net/ethernet/micrel/Kconfig"
 source "drivers/net/ethernet/microchip/Kconfig"
-source "drivers/net/ethernet/moxa/Kconfig"
 source "drivers/net/ethernet/mscc/Kconfig"
+source "drivers/net/ethernet/microsoft/Kconfig"
+source "drivers/net/ethernet/moxa/Kconfig"
 source "drivers/net/ethernet/myricom/Kconfig"
 
 config FEALNX
@@ -141,10 +140,10 @@ config FEALNX
 	  Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
 	  cards. <http://www.myson.com.tw/>
 
+source "drivers/net/ethernet/ni/Kconfig"
 source "drivers/net/ethernet/natsemi/Kconfig"
 source "drivers/net/ethernet/neterion/Kconfig"
 source "drivers/net/ethernet/netronome/Kconfig"
-source "drivers/net/ethernet/ni/Kconfig"
 source "drivers/net/ethernet/8390/Kconfig"
 source "drivers/net/ethernet/nvidia/Kconfig"
 source "drivers/net/ethernet/nxp/Kconfig"
@@ -164,6 +163,7 @@ source "drivers/net/ethernet/packetengines/Kconfig"
 source "drivers/net/ethernet/pasemi/Kconfig"
 source "drivers/net/ethernet/pensando/Kconfig"
 source "drivers/net/ethernet/qlogic/Kconfig"
+source "drivers/net/ethernet/brocade/Kconfig"
 source "drivers/net/ethernet/qualcomm/Kconfig"
 source "drivers/net/ethernet/rdc/Kconfig"
 source "drivers/net/ethernet/realtek/Kconfig"
@@ -171,10 +171,10 @@ source "drivers/net/ethernet/renesas/Kconfig"
 source "drivers/net/ethernet/rocker/Kconfig"
 source "drivers/net/ethernet/samsung/Kconfig"
 source "drivers/net/ethernet/seeq/Kconfig"
-source "drivers/net/ethernet/sfc/Kconfig"
 source "drivers/net/ethernet/sgi/Kconfig"
 source "drivers/net/ethernet/silan/Kconfig"
 source "drivers/net/ethernet/sis/Kconfig"
+source "drivers/net/ethernet/sfc/Kconfig"
 source "drivers/net/ethernet/smsc/Kconfig"
 source "drivers/net/ethernet/socionext/Kconfig"
 source "drivers/net/ethernet/stmicro/Kconfig"
-- 
2.35.1

Re: [PATCH] net: restore alpha order to Ethernet devices in config

[patchwork-bot+netdevbpf]

Hello:

This patch was applied to netdev/net.git (master)
by David S. Miller <davem@davemloft.net>:

On Thu, 14 Apr 2022 09:03:12 -0700 you wrote:
> The displayed list of Ethernet devices in make menuconfig
> has gotten out of order. This is mostly due to changes in vendor
> names etc, but also because of new Microsoft entry in wrong place.
> 
> This restores so that the display is in order even if the names
> of the sub directories are not.
> 
> [...]

Here is the summary with links:
  - net: restore alpha order to Ethernet devices in config
    https://git.kernel.org/netdev/net/c/da367ac74aec

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

Re: [PATCH] net: restore alpha order to Ethernet devices in config

[patchwork-bot+netdevbpf]

Hello:

This patch was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba@kernel.org>:

On Tue,  7 Mar 2023 16:10:51 -0600 you wrote:
> From: Bjorn Helgaas <bhelgaas@google.com>
> 
> The filename "wangxun" sorts between "intel" and "xscale", but
> xscale/Kconfig contains "Intel XScale" prompts, so Wangxun ends up in the
> wrong place in the config front-ends.
> 
> Move wangxun/Kconfig so the Wangxun devices appear in order in the user
> interface.
> 
> [...]

Here is the summary with links:
  - net: restore alpha order to Ethernet devices in config
    https://git.kernel.org/netdev/net-next/c/a1331535aeb4

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html

[PATCH] net: restore alpha order to Ethernet devices in config

[Bjorn Helgaas]

From: Bjorn Helgaas <bhelgaas@google.com>

The filename "wangxun" sorts between "intel" and "xscale", but
xscale/Kconfig contains "Intel XScale" prompts, so Wangxun ends up in the
wrong place in the config front-ends.

Move wangxun/Kconfig so the Wangxun devices appear in order in the user
interface.

Fixes: 3ce7547e5b71 ("net: txgbe: Add build support for txgbe")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
 drivers/net/ethernet/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 323ec56e8a74..bb51ac8ad1b8 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -84,7 +84,6 @@ source "drivers/net/ethernet/huawei/Kconfig"
 source "drivers/net/ethernet/i825xx/Kconfig"
 source "drivers/net/ethernet/ibm/Kconfig"
 source "drivers/net/ethernet/intel/Kconfig"
-source "drivers/net/ethernet/wangxun/Kconfig"
 source "drivers/net/ethernet/xscale/Kconfig"
 
 config JME
@@ -179,6 +178,7 @@ source "drivers/net/ethernet/toshiba/Kconfig"
 source "drivers/net/ethernet/tundra/Kconfig"
 source "drivers/net/ethernet/vertexcom/Kconfig"
 source "drivers/net/ethernet/via/Kconfig"
+source "drivers/net/ethernet/wangxun/Kconfig"
 source "drivers/net/ethernet/wiznet/Kconfig"
 source "drivers/net/ethernet/xilinx/Kconfig"
 source "drivers/net/ethernet/xircom/Kconfig"
-- 
2.25.1