All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v6 0/7] RISC-V IPI Improvements
@ 2022-04-18 10:52 ` Anup Patel
  0 siblings, 0 replies; 22+ messages in thread
From: Anup Patel @ 2022-04-18 10:52 UTC (permalink / raw)
  To: Palmer Dabbelt, Paul Walmsley, Thomas Gleixner, Marc Zyngier,
	Daniel Lezcano
  Cc: Atish Patra, Alistair Francis, Anup Patel, linux-riscv,
	linux-kernel, Anup Patel

This series aims to improve IPI support in Linux RISC-V in following ways:
 1) Treat IPIs as normal per-CPU interrupts instead of having custom RISC-V
    specific hooks. This also makes Linux RISC-V IPI support aligned with
    other architectures.
 2) Remote TLB flushes and icache flushes should prefer local IPIs instead
    of SBI calls whenever we have specialized hardware (such as RISC-V AIA
    IMSIC and RISC-V SWI) which allows S-mode software to directly inject
    IPIs without any assistance from M-mode runtime firmware.

These patches were originally part of the "Linux RISC-V ACLINT Support"
series but this now a separate series so that it can be merged independently
of the "Linux RISC-V ACLINT Support" series.
(Refer, https://lore.kernel.org/lkml/20211007123632.697666-1-anup.patel@wdc.com/)

These patches are also a preparatory patches for the up-coming:
 1) Linux RISC-V AIA support
 2) KVM RISC-V TLB flush improvements
 3) Linux RISC-V SWI support

These patches can also be found in riscv_ipi_imp_v6 branch at:
https://github.com/avpatel/linux.git

Changes since v5:
 - Rebased on Linux-5.18-rc3
 - Used kernel doc style in PATCH3
 - Removed redundant loop in ipi_mux_process() of PATCH3
 - Removed "RISC-V" prefix form ipi_mux_chip.name of PATCH3
 - Removed use of "this patch" in PATCH3 commit description
 - Addressed few other nit comments in PATCH3

Changes since v4:
 - Rebased on Linux-5.17
 - Includes new PATCH3 which adds mechanism to multiplex a single HW IPI

Changes since v3:
 - Rebased on Linux-5.17-rc6
 - Updated PATCH2 to not export riscv_set_intc_hwnode_fn()
 - Simplified riscv_intc_hwnode() in PATCH2

Changes since v2:
 - Rebased on Linux-5.17-rc4
 - Updated PATCH2 to not create synthetic INTC fwnode and instead provide
   a function which allows drivers to directly discover INTC fwnode

Changes since v1:
 - Use synthetic fwnode for INTC instead of irq_set_default_host() in PATCH2

Anup Patel (7):
  RISC-V: Clear SIP bit only when using SBI IPI operations
  irqchip/riscv-intc: Allow drivers to directly discover INTC hwnode
  genirq: Add mechanism to multiplex a single HW IPI
  RISC-V: Treat IPIs as normal Linux IRQs
  RISC-V: Allow marking IPIs as suitable for remote FENCEs
  RISC-V: Use IPIs for remote TLB flush when possible
  RISC-V: Use IPIs for remote icache flush when possible

 arch/riscv/Kconfig                |   2 +
 arch/riscv/include/asm/irq.h      |   4 +
 arch/riscv/include/asm/sbi.h      |   2 +
 arch/riscv/include/asm/smp.h      |  49 +++++---
 arch/riscv/kernel/Makefile        |   1 +
 arch/riscv/kernel/cpu-hotplug.c   |   3 +-
 arch/riscv/kernel/irq.c           |  21 +++-
 arch/riscv/kernel/sbi-ipi.c       |  60 +++++++++
 arch/riscv/kernel/sbi.c           |  11 --
 arch/riscv/kernel/smp.c           | 164 +++++++++++++------------
 arch/riscv/kernel/smpboot.c       |   5 +-
 arch/riscv/mm/cacheflush.c        |   5 +-
 arch/riscv/mm/tlbflush.c          |  93 +++++++++++---
 drivers/clocksource/timer-clint.c |  41 +++++--
 drivers/irqchip/irq-riscv-intc.c  |  60 ++++-----
 include/linux/irq.h               |  11 ++
 kernel/irq/Kconfig                |   4 +
 kernel/irq/Makefile               |   1 +
 kernel/irq/ipi-mux.c              | 197 ++++++++++++++++++++++++++++++
 19 files changed, 567 insertions(+), 167 deletions(-)
 create mode 100644 arch/riscv/kernel/sbi-ipi.c
 create mode 100644 kernel/irq/ipi-mux.c

-- 
2.25.1


^ permalink raw reply	[flat|nested] 22+ messages in thread
* [PATCH v6 0/7] RISC-V IPI Improvements
@ 2022-04-18 10:52 ` Anup Patel
  0 siblings, 0 replies; 22+ messages in thread
From: Anup Patel @ 2022-04-18 10:52 UTC (permalink / raw)
  To: Palmer Dabbelt, Paul Walmsley, Thomas Gleixner, Marc Zyngier,
	Daniel Lezcano
  Cc: Atish Patra, Alistair Francis, Anup Patel, linux-riscv,
	linux-kernel, Anup Patel

This series aims to improve IPI support in Linux RISC-V in following ways:
 1) Treat IPIs as normal per-CPU interrupts instead of having custom RISC-V
    specific hooks. This also makes Linux RISC-V IPI support aligned with
    other architectures.
 2) Remote TLB flushes and icache flushes should prefer local IPIs instead
    of SBI calls whenever we have specialized hardware (such as RISC-V AIA
    IMSIC and RISC-V SWI) which allows S-mode software to directly inject
    IPIs without any assistance from M-mode runtime firmware.

These patches were originally part of the "Linux RISC-V ACLINT Support"
series but this now a separate series so that it can be merged independently
of the "Linux RISC-V ACLINT Support" series.
(Refer, https://lore.kernel.org/lkml/20211007123632.697666-1-anup.patel@wdc.com/)

These patches are also a preparatory patches for the up-coming:
 1) Linux RISC-V AIA support
 2) KVM RISC-V TLB flush improvements
 3) Linux RISC-V SWI support

These patches can also be found in riscv_ipi_imp_v6 branch at:
https://github.com/avpatel/linux.git

Changes since v5:
 - Rebased on Linux-5.18-rc3
 - Used kernel doc style in PATCH3
 - Removed redundant loop in ipi_mux_process() of PATCH3
 - Removed "RISC-V" prefix form ipi_mux_chip.name of PATCH3
 - Removed use of "this patch" in PATCH3 commit description
 - Addressed few other nit comments in PATCH3

Changes since v4:
 - Rebased on Linux-5.17
 - Includes new PATCH3 which adds mechanism to multiplex a single HW IPI

Changes since v3:
 - Rebased on Linux-5.17-rc6
 - Updated PATCH2 to not export riscv_set_intc_hwnode_fn()
 - Simplified riscv_intc_hwnode() in PATCH2

Changes since v2:
 - Rebased on Linux-5.17-rc4
 - Updated PATCH2 to not create synthetic INTC fwnode and instead provide
   a function which allows drivers to directly discover INTC fwnode

Changes since v1:
 - Use synthetic fwnode for INTC instead of irq_set_default_host() in PATCH2

Anup Patel (7):
  RISC-V: Clear SIP bit only when using SBI IPI operations
  irqchip/riscv-intc: Allow drivers to directly discover INTC hwnode
  genirq: Add mechanism to multiplex a single HW IPI
  RISC-V: Treat IPIs as normal Linux IRQs
  RISC-V: Allow marking IPIs as suitable for remote FENCEs
  RISC-V: Use IPIs for remote TLB flush when possible
  RISC-V: Use IPIs for remote icache flush when possible

 arch/riscv/Kconfig                |   2 +
 arch/riscv/include/asm/irq.h      |   4 +
 arch/riscv/include/asm/sbi.h      |   2 +
 arch/riscv/include/asm/smp.h      |  49 +++++---
 arch/riscv/kernel/Makefile        |   1 +
 arch/riscv/kernel/cpu-hotplug.c   |   3 +-
 arch/riscv/kernel/irq.c           |  21 +++-
 arch/riscv/kernel/sbi-ipi.c       |  60 +++++++++
 arch/riscv/kernel/sbi.c           |  11 --
 arch/riscv/kernel/smp.c           | 164 +++++++++++++------------
 arch/riscv/kernel/smpboot.c       |   5 +-
 arch/riscv/mm/cacheflush.c        |   5 +-
 arch/riscv/mm/tlbflush.c          |  93 +++++++++++---
 drivers/clocksource/timer-clint.c |  41 +++++--
 drivers/irqchip/irq-riscv-intc.c  |  60 ++++-----
 include/linux/irq.h               |  11 ++
 kernel/irq/Kconfig                |   4 +
 kernel/irq/Makefile               |   1 +
 kernel/irq/ipi-mux.c              | 197 ++++++++++++++++++++++++++++++
 19 files changed, 567 insertions(+), 167 deletions(-)
 create mode 100644 arch/riscv/kernel/sbi-ipi.c
 create mode 100644 kernel/irq/ipi-mux.c

-- 
2.25.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 22+ messages in thread
* [PATCH v6 1/7] RISC-V: Clear SIP bit only when using SBI IPI operations
  2022-04-18 10:52 ` Anup Patel
@ 2022-04-18 10:52   ` Anup Patel
  -1 siblings, 0 replies; 22+ messages in thread
From: Anup Patel @ 2022-04-18 10:52 UTC (permalink / raw)
  To: Palmer Dabbelt, Paul Walmsley, Thomas Gleixner, Marc Zyngier,
	Daniel Lezcano
  Cc: Atish Patra, Alistair Francis, Anup Patel, linux-riscv,
	linux-kernel, Anup Patel, Bin Meng

The software interrupt pending (i.e. [M|S]SIP) bit is writeable for
S-mode but read-only for M-mode so we clear this bit only when using
SBI IPI operations.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
---
 arch/riscv/kernel/sbi.c | 8 +++++++-
 arch/riscv/kernel/smp.c | 2 --
 2 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c
index 775d3322b422..fc614650a2e3 100644
--- a/arch/riscv/kernel/sbi.c
+++ b/arch/riscv/kernel/sbi.c
@@ -643,8 +643,14 @@ static void sbi_send_cpumask_ipi(const struct cpumask *target)
 	sbi_send_ipi(target);
 }
 
+static void sbi_ipi_clear(void)
+{
+	csr_clear(CSR_IP, IE_SIE);
+}
+
 static const struct riscv_ipi_ops sbi_ipi_ops = {
-	.ipi_inject = sbi_send_cpumask_ipi
+	.ipi_inject = sbi_send_cpumask_ipi,
+	.ipi_clear = sbi_ipi_clear
 };
 
 void __init sbi_init(void)
diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c
index b5d30ea92292..6fd8b3cbec1b 100644
--- a/arch/riscv/kernel/smp.c
+++ b/arch/riscv/kernel/smp.c
@@ -89,8 +89,6 @@ void riscv_clear_ipi(void)
 {
 	if (ipi_ops && ipi_ops->ipi_clear)
 		ipi_ops->ipi_clear();
-
-	csr_clear(CSR_IP, IE_SIE);
 }
 EXPORT_SYMBOL_GPL(riscv_clear_ipi);
 
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH v6 1/7] RISC-V: Clear SIP bit only when using SBI IPI operations
@ 2022-04-18 10:52   ` Anup Patel
  0 siblings, 0 replies; 22+ messages in thread
From: Anup Patel @ 2022-04-18 10:52 UTC (permalink / raw)
  To: Palmer Dabbelt, Paul Walmsley, Thomas Gleixner, Marc Zyngier,
	Daniel Lezcano
  Cc: Atish Patra, Alistair Francis, Anup Patel, linux-riscv,
	linux-kernel, Anup Patel, Bin Meng

The software interrupt pending (i.e. [M|S]SIP) bit is writeable for
S-mode but read-only for M-mode so we clear this bit only when using
SBI IPI operations.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
---
 arch/riscv/kernel/sbi.c | 8 +++++++-
 arch/riscv/kernel/smp.c | 2 --
 2 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c
index 775d3322b422..fc614650a2e3 100644
--- a/arch/riscv/kernel/sbi.c
+++ b/arch/riscv/kernel/sbi.c
@@ -643,8 +643,14 @@ static void sbi_send_cpumask_ipi(const struct cpumask *target)
 	sbi_send_ipi(target);
 }
 
+static void sbi_ipi_clear(void)
+{
+	csr_clear(CSR_IP, IE_SIE);
+}
+
 static const struct riscv_ipi_ops sbi_ipi_ops = {
-	.ipi_inject = sbi_send_cpumask_ipi
+	.ipi_inject = sbi_send_cpumask_ipi,
+	.ipi_clear = sbi_ipi_clear
 };
 
 void __init sbi_init(void)
diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c
index b5d30ea92292..6fd8b3cbec1b 100644
--- a/arch/riscv/kernel/smp.c
+++ b/arch/riscv/kernel/smp.c
@@ -89,8 +89,6 @@ void riscv_clear_ipi(void)
 {
 	if (ipi_ops && ipi_ops->ipi_clear)
 		ipi_ops->ipi_clear();
-
-	csr_clear(CSR_IP, IE_SIE);
 }
 EXPORT_SYMBOL_GPL(riscv_clear_ipi);
 
-- 
2.25.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH v6 2/7] irqchip/riscv-intc: Allow drivers to directly discover INTC hwnode
  2022-04-18 10:52 ` Anup Patel
@ 2022-04-18 10:53   ` Anup Patel
  -1 siblings, 0 replies; 22+ messages in thread
From: Anup Patel @ 2022-04-18 10:53 UTC (permalink / raw)
  To: Palmer Dabbelt, Paul Walmsley, Thomas Gleixner, Marc Zyngier,
	Daniel Lezcano
  Cc: Atish Patra, Alistair Francis, Anup Patel, linux-riscv,
	linux-kernel, Anup Patel

Various RISC-V drivers (such as SBI IPI, SBI Timer, SBI PMU, and
KVM RISC-V) don't have associated DT node but these drivers need
standard per-CPU (local) interrupts defined by the RISC-V privileged
specification.

We add riscv_get_intc_hwnode() in arch/riscv which allows RISC-V
drivers not having DT node to discover INTC hwnode which in-turn
helps these drivers to map per-CPU (local) interrupts provided
by the INTC driver.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 arch/riscv/include/asm/irq.h     |  4 ++++
 arch/riscv/kernel/irq.c          | 18 ++++++++++++++++++
 drivers/irqchip/irq-riscv-intc.c |  7 +++++++
 3 files changed, 29 insertions(+)

diff --git a/arch/riscv/include/asm/irq.h b/arch/riscv/include/asm/irq.h
index e4c435509983..43b9ebfbd943 100644
--- a/arch/riscv/include/asm/irq.h
+++ b/arch/riscv/include/asm/irq.h
@@ -12,6 +12,10 @@
 
 #include <asm-generic/irq.h>
 
+void riscv_set_intc_hwnode_fn(struct fwnode_handle *(*fn)(void));
+
+struct fwnode_handle *riscv_get_intc_hwnode(void);
+
 extern void __init init_IRQ(void);
 
 #endif /* _ASM_RISCV_IRQ_H */
diff --git a/arch/riscv/kernel/irq.c b/arch/riscv/kernel/irq.c
index 7207fa08d78f..96d3171f0ca1 100644
--- a/arch/riscv/kernel/irq.c
+++ b/arch/riscv/kernel/irq.c
@@ -7,9 +7,27 @@
 
 #include <linux/interrupt.h>
 #include <linux/irqchip.h>
+#include <linux/irqdomain.h>
+#include <linux/module.h>
 #include <linux/seq_file.h>
 #include <asm/smp.h>
 
+static struct fwnode_handle *(*__get_intc_node)(void);
+
+void riscv_set_intc_hwnode_fn(struct fwnode_handle *(*fn)(void))
+{
+	__get_intc_node = fn;
+}
+
+struct fwnode_handle *riscv_get_intc_hwnode(void)
+{
+	if (__get_intc_node)
+		return __get_intc_node();
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(riscv_get_intc_hwnode);
+
 int arch_show_interrupts(struct seq_file *p, int prec)
 {
 	show_ipi_stats(p, prec);
diff --git a/drivers/irqchip/irq-riscv-intc.c b/drivers/irqchip/irq-riscv-intc.c
index b65bd8878d4f..084793a57af8 100644
--- a/drivers/irqchip/irq-riscv-intc.c
+++ b/drivers/irqchip/irq-riscv-intc.c
@@ -92,6 +92,11 @@ static const struct irq_domain_ops riscv_intc_domain_ops = {
 	.xlate	= irq_domain_xlate_onecell,
 };
 
+static struct fwnode_handle *riscv_intc_hwnode(void)
+{
+	return intc_domain->fwnode;
+}
+
 static int __init riscv_intc_init(struct device_node *node,
 				  struct device_node *parent)
 {
@@ -125,6 +130,8 @@ static int __init riscv_intc_init(struct device_node *node,
 		return rc;
 	}
 
+	riscv_set_intc_hwnode_fn(riscv_intc_hwnode);
+
 	cpuhp_setup_state(CPUHP_AP_IRQ_RISCV_STARTING,
 			  "irqchip/riscv/intc:starting",
 			  riscv_intc_cpu_starting,
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH v6 2/7] irqchip/riscv-intc: Allow drivers to directly discover INTC hwnode
@ 2022-04-18 10:53   ` Anup Patel
  0 siblings, 0 replies; 22+ messages in thread
From: Anup Patel @ 2022-04-18 10:53 UTC (permalink / raw)
  To: Palmer Dabbelt, Paul Walmsley, Thomas Gleixner, Marc Zyngier,
	Daniel Lezcano
  Cc: Atish Patra, Alistair Francis, Anup Patel, linux-riscv,
	linux-kernel, Anup Patel

Various RISC-V drivers (such as SBI IPI, SBI Timer, SBI PMU, and
KVM RISC-V) don't have associated DT node but these drivers need
standard per-CPU (local) interrupts defined by the RISC-V privileged
specification.

We add riscv_get_intc_hwnode() in arch/riscv which allows RISC-V
drivers not having DT node to discover INTC hwnode which in-turn
helps these drivers to map per-CPU (local) interrupts provided
by the INTC driver.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 arch/riscv/include/asm/irq.h     |  4 ++++
 arch/riscv/kernel/irq.c          | 18 ++++++++++++++++++
 drivers/irqchip/irq-riscv-intc.c |  7 +++++++
 3 files changed, 29 insertions(+)

diff --git a/arch/riscv/include/asm/irq.h b/arch/riscv/include/asm/irq.h
index e4c435509983..43b9ebfbd943 100644
--- a/arch/riscv/include/asm/irq.h
+++ b/arch/riscv/include/asm/irq.h
@@ -12,6 +12,10 @@
 
 #include <asm-generic/irq.h>
 
+void riscv_set_intc_hwnode_fn(struct fwnode_handle *(*fn)(void));
+
+struct fwnode_handle *riscv_get_intc_hwnode(void);
+
 extern void __init init_IRQ(void);
 
 #endif /* _ASM_RISCV_IRQ_H */
diff --git a/arch/riscv/kernel/irq.c b/arch/riscv/kernel/irq.c
index 7207fa08d78f..96d3171f0ca1 100644
--- a/arch/riscv/kernel/irq.c
+++ b/arch/riscv/kernel/irq.c
@@ -7,9 +7,27 @@
 
 #include <linux/interrupt.h>
 #include <linux/irqchip.h>
+#include <linux/irqdomain.h>
+#include <linux/module.h>
 #include <linux/seq_file.h>
 #include <asm/smp.h>
 
+static struct fwnode_handle *(*__get_intc_node)(void);
+
+void riscv_set_intc_hwnode_fn(struct fwnode_handle *(*fn)(void))
+{
+	__get_intc_node = fn;
+}
+
+struct fwnode_handle *riscv_get_intc_hwnode(void)
+{
+	if (__get_intc_node)
+		return __get_intc_node();
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(riscv_get_intc_hwnode);
+
 int arch_show_interrupts(struct seq_file *p, int prec)
 {
 	show_ipi_stats(p, prec);
diff --git a/drivers/irqchip/irq-riscv-intc.c b/drivers/irqchip/irq-riscv-intc.c
index b65bd8878d4f..084793a57af8 100644
--- a/drivers/irqchip/irq-riscv-intc.c
+++ b/drivers/irqchip/irq-riscv-intc.c
@@ -92,6 +92,11 @@ static const struct irq_domain_ops riscv_intc_domain_ops = {
 	.xlate	= irq_domain_xlate_onecell,
 };
 
+static struct fwnode_handle *riscv_intc_hwnode(void)
+{
+	return intc_domain->fwnode;
+}
+
 static int __init riscv_intc_init(struct device_node *node,
 				  struct device_node *parent)
 {
@@ -125,6 +130,8 @@ static int __init riscv_intc_init(struct device_node *node,
 		return rc;
 	}
 
+	riscv_set_intc_hwnode_fn(riscv_intc_hwnode);
+
 	cpuhp_setup_state(CPUHP_AP_IRQ_RISCV_STARTING,
 			  "irqchip/riscv/intc:starting",
 			  riscv_intc_cpu_starting,
-- 
2.25.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH v6 3/7] genirq: Add mechanism to multiplex a single HW IPI
  2022-04-18 10:52 ` Anup Patel
@ 2022-04-18 10:53   ` Anup Patel
  -1 siblings, 0 replies; 22+ messages in thread
From: Anup Patel @ 2022-04-18 10:53 UTC (permalink / raw)
  To: Palmer Dabbelt, Paul Walmsley, Thomas Gleixner, Marc Zyngier,
	Daniel Lezcano
  Cc: Atish Patra, Alistair Francis, Anup Patel, linux-riscv,
	linux-kernel, Anup Patel

All RISC-V platforms have a single HW IPI provided by the INTC local
interrupt controller. The HW method to trigger INTC IPI can be through
external irqchip (e.g. RISC-V AIA), through platform specific device
(e.g. SiFive CLINT timer), or through firmware (e.g. SBI IPI call).

To support multiple IPIs on RISC-V, we add a generic IPI multiplexing
mechanism which help us create multiple virtual IPIs using a single
HW IPI. This generic IPI multiplexing is shared among various RISC-V
irqchip drivers.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 include/linux/irq.h  |  11 +++
 kernel/irq/Kconfig   |   4 +
 kernel/irq/Makefile  |   1 +
 kernel/irq/ipi-mux.c | 197 +++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 213 insertions(+)
 create mode 100644 kernel/irq/ipi-mux.c

diff --git a/include/linux/irq.h b/include/linux/irq.h
index f92788ccdba2..5bb4e2db63d7 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -1247,6 +1247,17 @@ int __ipi_send_mask(struct irq_desc *desc, const struct cpumask *dest);
 int ipi_send_single(unsigned int virq, unsigned int cpu);
 int ipi_send_mask(unsigned int virq, const struct cpumask *dest);
 
+#define IPI_MUX_NR_IRQS		BITS_PER_LONG
+
+struct ipi_mux_ops {
+	void (*ipi_mux_clear)(unsigned int parent_virq);
+	void (*ipi_mux_send)(unsigned int parent_virq,
+			     const struct cpumask *mask);
+};
+
+void ipi_mux_process(void);
+int ipi_mux_create(unsigned int parent_virq, const struct ipi_mux_ops *ops);
+
 #ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
 /*
  * Registers a generic IRQ handling function as the top-level IRQ handler in
diff --git a/kernel/irq/Kconfig b/kernel/irq/Kconfig
index 10929eda9825..2388e7d40ed3 100644
--- a/kernel/irq/Kconfig
+++ b/kernel/irq/Kconfig
@@ -84,6 +84,10 @@ config GENERIC_IRQ_IPI
 	bool
 	select IRQ_DOMAIN_HIERARCHY
 
+# Generic IRQ IPI Mux support
+config GENERIC_IRQ_IPI_MUX
+	bool
+
 # Generic MSI interrupt support
 config GENERIC_MSI_IRQ
 	bool
diff --git a/kernel/irq/Makefile b/kernel/irq/Makefile
index b4f53717d143..f19d3080bf11 100644
--- a/kernel/irq/Makefile
+++ b/kernel/irq/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_GENERIC_IRQ_MIGRATION) += cpuhotplug.o
 obj-$(CONFIG_PM_SLEEP) += pm.o
 obj-$(CONFIG_GENERIC_MSI_IRQ) += msi.o
 obj-$(CONFIG_GENERIC_IRQ_IPI) += ipi.o
+obj-$(CONFIG_GENERIC_IRQ_IPI_MUX) += ipi-mux.o
 obj-$(CONFIG_SMP) += affinity.o
 obj-$(CONFIG_GENERIC_IRQ_DEBUGFS) += debugfs.o
 obj-$(CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR) += matrix.o
diff --git a/kernel/irq/ipi-mux.c b/kernel/irq/ipi-mux.c
new file mode 100644
index 000000000000..1a1fcfe3ac54
--- /dev/null
+++ b/kernel/irq/ipi-mux.c
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Multiplex several virtual IPIs over a single HW IPI.
+ *
+ * Copyright (c) 2022 Ventana Micro Systems Inc.
+ */
+
+#define pr_fmt(fmt) "ipi-mux: " fmt
+#include <linux/cpu.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/smp.h>
+
+static unsigned int ipi_mux_parent_virq;
+static struct irq_domain *ipi_mux_domain;
+static const struct  ipi_mux_ops *ipi_mux_ops;
+static DEFINE_PER_CPU(unsigned long, ipi_mux_bits);
+
+static void ipi_mux_dummy(struct irq_data *d)
+{
+}
+
+static void ipi_mux_send_mask(struct irq_data *d, const struct cpumask *mask)
+{
+	int cpu;
+
+	/* Barrier before doing atomic bit update to IPI bits */
+	smp_mb__before_atomic();
+
+	for_each_cpu(cpu, mask)
+		set_bit(d->hwirq, per_cpu_ptr(&ipi_mux_bits, cpu));
+
+	/* Barrier after doing atomic bit update to IPI bits */
+	smp_mb__after_atomic();
+
+	/* Trigger the parent IPI */
+	ipi_mux_ops->ipi_mux_send(ipi_mux_parent_virq, mask);
+}
+
+static struct irq_chip ipi_mux_chip = {
+	.name		= "IPI Mux",
+	.irq_mask	= ipi_mux_dummy,
+	.irq_unmask	= ipi_mux_dummy,
+	.ipi_send_mask	= ipi_mux_send_mask,
+};
+
+static int ipi_mux_domain_map(struct irq_domain *d, unsigned int irq,
+			      irq_hw_number_t hwirq)
+{
+	irq_set_percpu_devid(irq);
+	irq_domain_set_info(d, irq, hwirq, &ipi_mux_chip, d->host_data,
+			    handle_percpu_devid_irq, NULL, NULL);
+
+	return 0;
+}
+
+static int ipi_mux_domain_alloc(struct irq_domain *d, unsigned int virq,
+				unsigned int nr_irqs, void *arg)
+{
+	unsigned int type = IRQ_TYPE_NONE;
+	struct irq_fwspec *fwspec = arg;
+	irq_hw_number_t hwirq;
+	int i, ret;
+
+	ret = irq_domain_translate_onecell(d, fwspec, &hwirq, &type);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < nr_irqs; i++) {
+		ret = ipi_mux_domain_map(d, virq + i, hwirq + i);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static const struct irq_domain_ops ipi_mux_domain_ops = {
+	.translate	= irq_domain_translate_onecell,
+	.alloc		= ipi_mux_domain_alloc,
+	.free		= irq_domain_free_irqs_top,
+};
+
+/**
+ * ipi_mux_process - Process multiplexed virtual IPIs
+ */
+void ipi_mux_process(void)
+{
+	unsigned long irqs, *bits = this_cpu_ptr(&ipi_mux_bits);
+	irq_hw_number_t hwirq;
+	int err;
+
+	/* Clear the parent IPI */
+	if (ipi_mux_ops->ipi_mux_clear)
+		ipi_mux_ops->ipi_mux_clear(ipi_mux_parent_virq);
+
+	/*
+	 * Barrier for IPI bits paired with smp_mb__xyz_atomic()
+	 * in ipi_mux_send_mask()
+	 */
+	smp_mb();
+
+	irqs = xchg(bits, 0);
+	if (!irqs)
+		return;
+
+	for_each_set_bit(hwirq, &irqs, IPI_MUX_NR_IRQS) {
+		err = generic_handle_domain_irq(ipi_mux_domain,
+						hwirq);
+		if (unlikely(err))
+			pr_warn_ratelimited(
+				"can't find mapping for hwirq %lu\n",
+				hwirq);
+	}
+}
+
+static void ipi_mux_handler(struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+
+	chained_irq_enter(chip, desc);
+	ipi_mux_process();
+	chained_irq_exit(chip, desc);
+}
+
+static int ipi_mux_dying_cpu(unsigned int cpu)
+{
+	disable_percpu_irq(ipi_mux_parent_virq);
+	return 0;
+}
+
+static int ipi_mux_starting_cpu(unsigned int cpu)
+{
+	enable_percpu_irq(ipi_mux_parent_virq,
+			  irq_get_trigger_type(ipi_mux_parent_virq));
+	return 0;
+}
+
+/**
+ * ipi_mux_create - Create virtual IPIs (total IPI_MUX_NR_IRQS) multiplexed
+ * on top of a single parent IPI.
+ * @parent_virq:	virq of the parent IPI
+ * @ops:		multiplexing operations for the parent IPI
+ *
+ * If the parent IPI > 0 then ipi_mux_process() will be automatically
+ * called via chained handler.
+ *
+ * If the parent IPI <= 0 then it is responsiblity of irqchip drivers
+ * to explicitly call ipi_mux_process() for processing muxed IPIs.
+ *
+ * Returns first virq of the newly created virutal IPIs upon success
+ * or <=0 upon failure
+ */
+int ipi_mux_create(unsigned int parent_virq, const struct ipi_mux_ops *ops)
+{
+	struct irq_domain *domain;
+	struct irq_fwspec ipi;
+	int virq;
+
+	if (ipi_mux_domain || !ops || !ops->ipi_mux_send)
+		return 0;
+
+	domain = irq_domain_add_linear(NULL, IPI_MUX_NR_IRQS,
+				       &ipi_mux_domain_ops, NULL);
+	if (!domain) {
+		pr_err("unable to add IPI Mux domain\n");
+		return 0;
+	}
+
+	ipi.fwnode = domain->fwnode;
+	ipi.param_count = 1;
+	ipi.param[0] = 0;
+	virq = __irq_domain_alloc_irqs(domain, -1, IPI_MUX_NR_IRQS,
+				       NUMA_NO_NODE, &ipi, false, NULL);
+	if (virq <= 0) {
+		pr_err("unable to alloc IRQs from IPI Mux domain\n");
+		irq_domain_remove(domain);
+		return virq;
+	}
+
+	ipi_mux_domain = domain;
+	ipi_mux_parent_virq = parent_virq;
+	ipi_mux_ops = ops;
+
+	if (parent_virq > 0) {
+		irq_set_chained_handler(parent_virq, ipi_mux_handler);
+
+		cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
+				  "irqchip/ipi-mux:starting",
+				  ipi_mux_starting_cpu, ipi_mux_dying_cpu);
+	}
+
+	return virq;
+}
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH v6 3/7] genirq: Add mechanism to multiplex a single HW IPI
@ 2022-04-18 10:53   ` Anup Patel
  0 siblings, 0 replies; 22+ messages in thread
From: Anup Patel @ 2022-04-18 10:53 UTC (permalink / raw)
  To: Palmer Dabbelt, Paul Walmsley, Thomas Gleixner, Marc Zyngier,
	Daniel Lezcano
  Cc: Atish Patra, Alistair Francis, Anup Patel, linux-riscv,
	linux-kernel, Anup Patel

All RISC-V platforms have a single HW IPI provided by the INTC local
interrupt controller. The HW method to trigger INTC IPI can be through
external irqchip (e.g. RISC-V AIA), through platform specific device
(e.g. SiFive CLINT timer), or through firmware (e.g. SBI IPI call).

To support multiple IPIs on RISC-V, we add a generic IPI multiplexing
mechanism which help us create multiple virtual IPIs using a single
HW IPI. This generic IPI multiplexing is shared among various RISC-V
irqchip drivers.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 include/linux/irq.h  |  11 +++
 kernel/irq/Kconfig   |   4 +
 kernel/irq/Makefile  |   1 +
 kernel/irq/ipi-mux.c | 197 +++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 213 insertions(+)
 create mode 100644 kernel/irq/ipi-mux.c

diff --git a/include/linux/irq.h b/include/linux/irq.h
index f92788ccdba2..5bb4e2db63d7 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -1247,6 +1247,17 @@ int __ipi_send_mask(struct irq_desc *desc, const struct cpumask *dest);
 int ipi_send_single(unsigned int virq, unsigned int cpu);
 int ipi_send_mask(unsigned int virq, const struct cpumask *dest);
 
+#define IPI_MUX_NR_IRQS		BITS_PER_LONG
+
+struct ipi_mux_ops {
+	void (*ipi_mux_clear)(unsigned int parent_virq);
+	void (*ipi_mux_send)(unsigned int parent_virq,
+			     const struct cpumask *mask);
+};
+
+void ipi_mux_process(void);
+int ipi_mux_create(unsigned int parent_virq, const struct ipi_mux_ops *ops);
+
 #ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
 /*
  * Registers a generic IRQ handling function as the top-level IRQ handler in
diff --git a/kernel/irq/Kconfig b/kernel/irq/Kconfig
index 10929eda9825..2388e7d40ed3 100644
--- a/kernel/irq/Kconfig
+++ b/kernel/irq/Kconfig
@@ -84,6 +84,10 @@ config GENERIC_IRQ_IPI
 	bool
 	select IRQ_DOMAIN_HIERARCHY
 
+# Generic IRQ IPI Mux support
+config GENERIC_IRQ_IPI_MUX
+	bool
+
 # Generic MSI interrupt support
 config GENERIC_MSI_IRQ
 	bool
diff --git a/kernel/irq/Makefile b/kernel/irq/Makefile
index b4f53717d143..f19d3080bf11 100644
--- a/kernel/irq/Makefile
+++ b/kernel/irq/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_GENERIC_IRQ_MIGRATION) += cpuhotplug.o
 obj-$(CONFIG_PM_SLEEP) += pm.o
 obj-$(CONFIG_GENERIC_MSI_IRQ) += msi.o
 obj-$(CONFIG_GENERIC_IRQ_IPI) += ipi.o
+obj-$(CONFIG_GENERIC_IRQ_IPI_MUX) += ipi-mux.o
 obj-$(CONFIG_SMP) += affinity.o
 obj-$(CONFIG_GENERIC_IRQ_DEBUGFS) += debugfs.o
 obj-$(CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR) += matrix.o
diff --git a/kernel/irq/ipi-mux.c b/kernel/irq/ipi-mux.c
new file mode 100644
index 000000000000..1a1fcfe3ac54
--- /dev/null
+++ b/kernel/irq/ipi-mux.c
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Multiplex several virtual IPIs over a single HW IPI.
+ *
+ * Copyright (c) 2022 Ventana Micro Systems Inc.
+ */
+
+#define pr_fmt(fmt) "ipi-mux: " fmt
+#include <linux/cpu.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/smp.h>
+
+static unsigned int ipi_mux_parent_virq;
+static struct irq_domain *ipi_mux_domain;
+static const struct  ipi_mux_ops *ipi_mux_ops;
+static DEFINE_PER_CPU(unsigned long, ipi_mux_bits);
+
+static void ipi_mux_dummy(struct irq_data *d)
+{
+}
+
+static void ipi_mux_send_mask(struct irq_data *d, const struct cpumask *mask)
+{
+	int cpu;
+
+	/* Barrier before doing atomic bit update to IPI bits */
+	smp_mb__before_atomic();
+
+	for_each_cpu(cpu, mask)
+		set_bit(d->hwirq, per_cpu_ptr(&ipi_mux_bits, cpu));
+
+	/* Barrier after doing atomic bit update to IPI bits */
+	smp_mb__after_atomic();
+
+	/* Trigger the parent IPI */
+	ipi_mux_ops->ipi_mux_send(ipi_mux_parent_virq, mask);
+}
+
+static struct irq_chip ipi_mux_chip = {
+	.name		= "IPI Mux",
+	.irq_mask	= ipi_mux_dummy,
+	.irq_unmask	= ipi_mux_dummy,
+	.ipi_send_mask	= ipi_mux_send_mask,
+};
+
+static int ipi_mux_domain_map(struct irq_domain *d, unsigned int irq,
+			      irq_hw_number_t hwirq)
+{
+	irq_set_percpu_devid(irq);
+	irq_domain_set_info(d, irq, hwirq, &ipi_mux_chip, d->host_data,
+			    handle_percpu_devid_irq, NULL, NULL);
+
+	return 0;
+}
+
+static int ipi_mux_domain_alloc(struct irq_domain *d, unsigned int virq,
+				unsigned int nr_irqs, void *arg)
+{
+	unsigned int type = IRQ_TYPE_NONE;
+	struct irq_fwspec *fwspec = arg;
+	irq_hw_number_t hwirq;
+	int i, ret;
+
+	ret = irq_domain_translate_onecell(d, fwspec, &hwirq, &type);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < nr_irqs; i++) {
+		ret = ipi_mux_domain_map(d, virq + i, hwirq + i);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static const struct irq_domain_ops ipi_mux_domain_ops = {
+	.translate	= irq_domain_translate_onecell,
+	.alloc		= ipi_mux_domain_alloc,
+	.free		= irq_domain_free_irqs_top,
+};
+
+/**
+ * ipi_mux_process - Process multiplexed virtual IPIs
+ */
+void ipi_mux_process(void)
+{
+	unsigned long irqs, *bits = this_cpu_ptr(&ipi_mux_bits);
+	irq_hw_number_t hwirq;
+	int err;
+
+	/* Clear the parent IPI */
+	if (ipi_mux_ops->ipi_mux_clear)
+		ipi_mux_ops->ipi_mux_clear(ipi_mux_parent_virq);
+
+	/*
+	 * Barrier for IPI bits paired with smp_mb__xyz_atomic()
+	 * in ipi_mux_send_mask()
+	 */
+	smp_mb();
+
+	irqs = xchg(bits, 0);
+	if (!irqs)
+		return;
+
+	for_each_set_bit(hwirq, &irqs, IPI_MUX_NR_IRQS) {
+		err = generic_handle_domain_irq(ipi_mux_domain,
+						hwirq);
+		if (unlikely(err))
+			pr_warn_ratelimited(
+				"can't find mapping for hwirq %lu\n",
+				hwirq);
+	}
+}
+
+static void ipi_mux_handler(struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+
+	chained_irq_enter(chip, desc);
+	ipi_mux_process();
+	chained_irq_exit(chip, desc);
+}
+
+static int ipi_mux_dying_cpu(unsigned int cpu)
+{
+	disable_percpu_irq(ipi_mux_parent_virq);
+	return 0;
+}
+
+static int ipi_mux_starting_cpu(unsigned int cpu)
+{
+	enable_percpu_irq(ipi_mux_parent_virq,
+			  irq_get_trigger_type(ipi_mux_parent_virq));
+	return 0;
+}
+
+/**
+ * ipi_mux_create - Create virtual IPIs (total IPI_MUX_NR_IRQS) multiplexed
+ * on top of a single parent IPI.
+ * @parent_virq:	virq of the parent IPI
+ * @ops:		multiplexing operations for the parent IPI
+ *
+ * If the parent IPI > 0 then ipi_mux_process() will be automatically
+ * called via chained handler.
+ *
+ * If the parent IPI <= 0 then it is responsiblity of irqchip drivers
+ * to explicitly call ipi_mux_process() for processing muxed IPIs.
+ *
+ * Returns first virq of the newly created virutal IPIs upon success
+ * or <=0 upon failure
+ */
+int ipi_mux_create(unsigned int parent_virq, const struct ipi_mux_ops *ops)
+{
+	struct irq_domain *domain;
+	struct irq_fwspec ipi;
+	int virq;
+
+	if (ipi_mux_domain || !ops || !ops->ipi_mux_send)
+		return 0;
+
+	domain = irq_domain_add_linear(NULL, IPI_MUX_NR_IRQS,
+				       &ipi_mux_domain_ops, NULL);
+	if (!domain) {
+		pr_err("unable to add IPI Mux domain\n");
+		return 0;
+	}
+
+	ipi.fwnode = domain->fwnode;
+	ipi.param_count = 1;
+	ipi.param[0] = 0;
+	virq = __irq_domain_alloc_irqs(domain, -1, IPI_MUX_NR_IRQS,
+				       NUMA_NO_NODE, &ipi, false, NULL);
+	if (virq <= 0) {
+		pr_err("unable to alloc IRQs from IPI Mux domain\n");
+		irq_domain_remove(domain);
+		return virq;
+	}
+
+	ipi_mux_domain = domain;
+	ipi_mux_parent_virq = parent_virq;
+	ipi_mux_ops = ops;
+
+	if (parent_virq > 0) {
+		irq_set_chained_handler(parent_virq, ipi_mux_handler);
+
+		cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
+				  "irqchip/ipi-mux:starting",
+				  ipi_mux_starting_cpu, ipi_mux_dying_cpu);
+	}
+
+	return virq;
+}
-- 
2.25.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH v6 4/7] RISC-V: Treat IPIs as normal Linux IRQs
  2022-04-18 10:52 ` Anup Patel
@ 2022-04-18 10:53   ` Anup Patel
  -1 siblings, 0 replies; 22+ messages in thread
From: Anup Patel @ 2022-04-18 10:53 UTC (permalink / raw)
  To: Palmer Dabbelt, Paul Walmsley, Thomas Gleixner, Marc Zyngier,
	Daniel Lezcano
  Cc: Atish Patra, Alistair Francis, Anup Patel, linux-riscv,
	linux-kernel, Anup Patel

Currently, the RISC-V kernel provides arch specific hooks (i.e.
struct riscv_ipi_ops) to register IPI handling methods. The stats
gathering of IPIs is also arch specific in the RISC-V kernel.

Other architectures (such as ARM, ARM64, and MIPS) have moved away
from custom arch specific IPI handling methods. Currently, these
architectures have Linux irqchip drivers providing a range of Linux
IRQ numbers to be used as IPIs and IPI triggering is done using
generic IPI APIs. This approach allows architectures to treat IPIs
as normal Linux IRQs and IPI stats gathering is done by the generic
Linux IRQ subsystem.

We extend the RISC-V IPI handling as-per above approach so that arch
specific IPI handling methods (struct riscv_ipi_ops) can be removed
and the IPI handling is done through the Linux IRQ subsystem.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 arch/riscv/Kconfig                |   2 +
 arch/riscv/include/asm/sbi.h      |   2 +
 arch/riscv/include/asm/smp.h      |  35 ++++---
 arch/riscv/kernel/Makefile        |   1 +
 arch/riscv/kernel/cpu-hotplug.c   |   3 +-
 arch/riscv/kernel/irq.c           |   3 +-
 arch/riscv/kernel/sbi-ipi.c       |  60 ++++++++++++
 arch/riscv/kernel/sbi.c           |  17 ----
 arch/riscv/kernel/smp.c           | 153 +++++++++++++++---------------
 arch/riscv/kernel/smpboot.c       |   5 +-
 drivers/clocksource/timer-clint.c |  41 +++++---
 drivers/irqchip/irq-riscv-intc.c  |  55 +++++------
 12 files changed, 222 insertions(+), 155 deletions(-)
 create mode 100644 arch/riscv/kernel/sbi-ipi.c

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 00fd9c548f26..658dfa05ed18 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -57,6 +57,8 @@ config RISCV
 	select GENERIC_GETTIMEOFDAY if HAVE_GENERIC_VDSO
 	select GENERIC_IDLE_POLL_SETUP
 	select GENERIC_IOREMAP if MMU
+	select GENERIC_IRQ_IPI
+	select GENERIC_IRQ_IPI_MUX
 	select GENERIC_IRQ_MULTI_HANDLER
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IRQ_SHOW_LEVEL
diff --git a/arch/riscv/include/asm/sbi.h b/arch/riscv/include/asm/sbi.h
index 9e3c2cf1edaf..72a5426364ab 100644
--- a/arch/riscv/include/asm/sbi.h
+++ b/arch/riscv/include/asm/sbi.h
@@ -228,6 +228,7 @@ struct sbiret {
 };
 
 void sbi_init(void);
+void sbi_ipi_init(void);
 struct sbiret sbi_ecall(int ext, int fid, unsigned long arg0,
 			unsigned long arg1, unsigned long arg2,
 			unsigned long arg3, unsigned long arg4,
@@ -297,6 +298,7 @@ static inline unsigned long sbi_mk_version(unsigned long major,
 int sbi_err_map_linux_errno(int err);
 #else /* CONFIG_RISCV_SBI */
 static inline int sbi_remote_fence_i(const struct cpumask *cpu_mask) { return -1; }
+static inline void sbi_ipi_init(void) { }
 static inline void sbi_init(void) {}
 #endif /* CONFIG_RISCV_SBI */
 #endif /* _ASM_RISCV_SBI_H */
diff --git a/arch/riscv/include/asm/smp.h b/arch/riscv/include/asm/smp.h
index 23170c933d73..178fe4ada592 100644
--- a/arch/riscv/include/asm/smp.h
+++ b/arch/riscv/include/asm/smp.h
@@ -15,11 +15,6 @@
 struct seq_file;
 extern unsigned long boot_cpu_hartid;
 
-struct riscv_ipi_ops {
-	void (*ipi_inject)(const struct cpumask *target);
-	void (*ipi_clear)(void);
-};
-
 #ifdef CONFIG_SMP
 /*
  * Mapping between linux logical cpu index and hartid.
@@ -33,9 +28,6 @@ void show_ipi_stats(struct seq_file *p, int prec);
 /* SMP initialization hook for setup_arch */
 void __init setup_smp(void);
 
-/* Called from C code, this handles an IPI. */
-void handle_IPI(struct pt_regs *regs);
-
 /* Hook for the generic smp_call_function_many() routine. */
 void arch_send_call_function_ipi_mask(struct cpumask *mask);
 
@@ -44,11 +36,17 @@ void arch_send_call_function_single_ipi(int cpu);
 
 int riscv_hartid_to_cpuid(int hartid);
 
-/* Set custom IPI operations */
-void riscv_set_ipi_ops(const struct riscv_ipi_ops *ops);
+/* Enable IPI for CPU hotplug */
+void riscv_ipi_enable(void);
+
+/* Disable IPI for CPU hotplug */
+void riscv_ipi_disable(void);
 
-/* Clear IPI for current CPU */
-void riscv_clear_ipi(void);
+/* Check if IPI interrupt numbers are available */
+bool riscv_ipi_have_virq_range(void);
+
+/* Set the IPI interrupt numbers for arch (called by irqchip drivers) */
+void riscv_ipi_set_virq_range(int virq, int nr_irqs);
 
 /* Secondary hart entry */
 asmlinkage void smp_callin(void);
@@ -82,11 +80,20 @@ static inline unsigned long cpuid_to_hartid_map(int cpu)
 	return boot_cpu_hartid;
 }
 
-static inline void riscv_set_ipi_ops(const struct riscv_ipi_ops *ops)
+static inline void riscv_ipi_enable(void)
 {
 }
 
-static inline void riscv_clear_ipi(void)
+static inline void riscv_ipi_disable(void)
+{
+}
+
+static inline bool riscv_ipi_have_virq_range(void)
+{
+	return false;
+}
+
+static inline void riscv_ipi_set_virq_range(int virq, int nr)
 {
 }
 
diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
index 87adbe47bc15..2390510d877a 100644
--- a/arch/riscv/kernel/Makefile
+++ b/arch/riscv/kernel/Makefile
@@ -58,6 +58,7 @@ obj-$(CONFIG_TRACE_IRQFLAGS)	+= trace_irq.o
 obj-$(CONFIG_PERF_EVENTS)	+= perf_callchain.o
 obj-$(CONFIG_HAVE_PERF_REGS)	+= perf_regs.o
 obj-$(CONFIG_RISCV_SBI)		+= sbi.o
+obj-$(CONFIG_RISCV_SBI)		+= sbi-ipi.o
 ifeq ($(CONFIG_RISCV_SBI), y)
 obj-$(CONFIG_SMP) += cpu_ops_sbi.o
 endif
diff --git a/arch/riscv/kernel/cpu-hotplug.c b/arch/riscv/kernel/cpu-hotplug.c
index f7a832e3a1d1..39235cf50652 100644
--- a/arch/riscv/kernel/cpu-hotplug.c
+++ b/arch/riscv/kernel/cpu-hotplug.c
@@ -13,7 +13,7 @@
 #include <asm/irq.h>
 #include <asm/cpu_ops.h>
 #include <asm/numa.h>
-#include <asm/sbi.h>
+#include <asm/smp.h>
 
 bool cpu_has_hotplug(unsigned int cpu)
 {
@@ -43,6 +43,7 @@ int __cpu_disable(void)
 	remove_cpu_topology(cpu);
 	numa_remove_cpu(cpu);
 	set_cpu_online(cpu, false);
+	riscv_ipi_disable();
 	irq_migrate_all_off_this_cpu();
 
 	return ret;
diff --git a/arch/riscv/kernel/irq.c b/arch/riscv/kernel/irq.c
index 96d3171f0ca1..eb9a68a539e6 100644
--- a/arch/riscv/kernel/irq.c
+++ b/arch/riscv/kernel/irq.c
@@ -10,7 +10,7 @@
 #include <linux/irqdomain.h>
 #include <linux/module.h>
 #include <linux/seq_file.h>
-#include <asm/smp.h>
+#include <asm/sbi.h>
 
 static struct fwnode_handle *(*__get_intc_node)(void);
 
@@ -39,4 +39,5 @@ void __init init_IRQ(void)
 	irqchip_init();
 	if (!handle_arch_irq)
 		panic("No interrupt controller found.");
+	sbi_ipi_init();
 }
diff --git a/arch/riscv/kernel/sbi-ipi.c b/arch/riscv/kernel/sbi-ipi.c
new file mode 100644
index 000000000000..67f213ec2b04
--- /dev/null
+++ b/arch/riscv/kernel/sbi-ipi.c
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Multiplex several IPIs over a single HW IPI.
+ *
+ * Copyright (c) 2022 Ventana Micro Systems Inc.
+ */
+
+#define pr_fmt(fmt) "riscv: " fmt
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <asm/sbi.h>
+
+static void sbi_send_cpumask_ipi(unsigned int parent_virq,
+				 const struct cpumask *target)
+{
+	sbi_send_ipi(target);
+}
+
+static void sbi_ipi_clear(unsigned int parent_virq)
+{
+	csr_clear(CSR_IP, IE_SIE);
+}
+
+static struct ipi_mux_ops sbi_ipi_ops = {
+	.ipi_mux_clear = sbi_ipi_clear,
+	.ipi_mux_send = sbi_send_cpumask_ipi,
+};
+
+void __init sbi_ipi_init(void)
+{
+	int virq, parent_virq;
+	struct irq_domain *domain;
+
+	if (riscv_ipi_have_virq_range())
+		return;
+
+	domain = irq_find_matching_fwnode(riscv_get_intc_hwnode(),
+					  DOMAIN_BUS_ANY);
+	if (!domain) {
+		pr_err("unable to find INTC IRQ domain\n");
+		return;
+	}
+
+	parent_virq = irq_create_mapping(domain, RV_IRQ_SOFT);
+	if (!parent_virq) {
+		pr_err("unable to create INTC IRQ mapping\n");
+		return;
+	}
+
+	virq = ipi_mux_create(parent_virq, &sbi_ipi_ops);
+	if (virq <= 0) {
+		pr_err("unable to create muxed IPIs\n");
+		irq_dispose_mapping(parent_virq);
+		return;
+	}
+
+	riscv_ipi_set_virq_range(virq, IPI_MUX_NR_IRQS);
+	pr_info("providing IPIs using SBI IPI extension\n");
+}
diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c
index fc614650a2e3..e9f04eba0e09 100644
--- a/arch/riscv/kernel/sbi.c
+++ b/arch/riscv/kernel/sbi.c
@@ -638,21 +638,6 @@ long sbi_get_mimpid(void)
 	return __sbi_base_ecall(SBI_EXT_BASE_GET_MIMPID);
 }
 
-static void sbi_send_cpumask_ipi(const struct cpumask *target)
-{
-	sbi_send_ipi(target);
-}
-
-static void sbi_ipi_clear(void)
-{
-	csr_clear(CSR_IP, IE_SIE);
-}
-
-static const struct riscv_ipi_ops sbi_ipi_ops = {
-	.ipi_inject = sbi_send_cpumask_ipi,
-	.ipi_clear = sbi_ipi_clear
-};
-
 void __init sbi_init(void)
 {
 	int ret;
@@ -699,6 +684,4 @@ void __init sbi_init(void)
 		__sbi_send_ipi	= __sbi_send_ipi_v01;
 		__sbi_rfence	= __sbi_rfence_v01;
 	}
-
-	riscv_set_ipi_ops(&sbi_ipi_ops);
 }
diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c
index 6fd8b3cbec1b..a9f1aca38358 100644
--- a/arch/riscv/kernel/smp.c
+++ b/arch/riscv/kernel/smp.c
@@ -17,9 +17,9 @@
 #include <linux/sched.h>
 #include <linux/seq_file.h>
 #include <linux/delay.h>
+#include <linux/irq.h>
 #include <linux/irq_work.h>
 
-#include <asm/sbi.h>
 #include <asm/tlbflush.h>
 #include <asm/cacheflush.h>
 
@@ -41,11 +41,9 @@ void __init smp_setup_processor_id(void)
 	cpuid_to_hartid_map(0) = boot_cpu_hartid;
 }
 
-/* A collection of single bit ipi messages.  */
-static struct {
-	unsigned long stats[IPI_MAX] ____cacheline_aligned;
-	unsigned long bits ____cacheline_aligned;
-} ipi_data[NR_CPUS] __cacheline_aligned;
+static int ipi_virq_base __ro_after_init;
+static int nr_ipi __ro_after_init = IPI_MAX;
+static struct irq_desc *ipi_desc[IPI_MAX] __read_mostly;
 
 int riscv_hartid_to_cpuid(int hartid)
 {
@@ -77,46 +75,14 @@ static void ipi_stop(void)
 		wait_for_interrupt();
 }
 
-static const struct riscv_ipi_ops *ipi_ops __ro_after_init;
-
-void riscv_set_ipi_ops(const struct riscv_ipi_ops *ops)
-{
-	ipi_ops = ops;
-}
-EXPORT_SYMBOL_GPL(riscv_set_ipi_ops);
-
-void riscv_clear_ipi(void)
-{
-	if (ipi_ops && ipi_ops->ipi_clear)
-		ipi_ops->ipi_clear();
-}
-EXPORT_SYMBOL_GPL(riscv_clear_ipi);
-
 static void send_ipi_mask(const struct cpumask *mask, enum ipi_message_type op)
 {
-	int cpu;
-
-	smp_mb__before_atomic();
-	for_each_cpu(cpu, mask)
-		set_bit(op, &ipi_data[cpu].bits);
-	smp_mb__after_atomic();
-
-	if (ipi_ops && ipi_ops->ipi_inject)
-		ipi_ops->ipi_inject(mask);
-	else
-		pr_warn("SMP: IPI inject method not available\n");
+	__ipi_send_mask(ipi_desc[op], mask);
 }
 
 static void send_ipi_single(int cpu, enum ipi_message_type op)
 {
-	smp_mb__before_atomic();
-	set_bit(op, &ipi_data[cpu].bits);
-	smp_mb__after_atomic();
-
-	if (ipi_ops && ipi_ops->ipi_inject)
-		ipi_ops->ipi_inject(cpumask_of(cpu));
-	else
-		pr_warn("SMP: IPI inject method not available\n");
+	__ipi_send_mask(ipi_desc[op], cpumask_of(cpu));
 }
 
 #ifdef CONFIG_IRQ_WORK
@@ -126,55 +92,88 @@ void arch_irq_work_raise(void)
 }
 #endif
 
-void handle_IPI(struct pt_regs *regs)
+static irqreturn_t handle_IPI(int irq, void *data)
+{
+	int ipi = irq - ipi_virq_base;
+
+	switch (ipi) {
+	case IPI_RESCHEDULE:
+		scheduler_ipi();
+		break;
+	case IPI_CALL_FUNC:
+		generic_smp_call_function_interrupt();
+		break;
+	case IPI_CPU_STOP:
+		ipi_stop();
+		break;
+	case IPI_IRQ_WORK:
+		irq_work_run();
+		break;
+#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
+	case IPI_TIMER:
+		tick_receive_broadcast();
+		break;
+#endif
+	default:
+		pr_warn("CPU%d: unhandled IPI%d\n", smp_processor_id(), ipi);
+		break;
+	};
+
+	return IRQ_HANDLED;
+}
+
+void riscv_ipi_enable(void)
 {
-	unsigned long *pending_ipis = &ipi_data[smp_processor_id()].bits;
-	unsigned long *stats = ipi_data[smp_processor_id()].stats;
+	int i;
 
-	riscv_clear_ipi();
+	if (WARN_ON_ONCE(!ipi_virq_base))
+		return;
 
-	while (true) {
-		unsigned long ops;
+	for (i = 0; i < nr_ipi; i++)
+		enable_percpu_irq(ipi_virq_base + i, 0);
+}
 
-		/* Order bit clearing and data access. */
-		mb();
+void riscv_ipi_disable(void)
+{
+	int i;
 
-		ops = xchg(pending_ipis, 0);
-		if (ops == 0)
-			return;
+	if (WARN_ON_ONCE(!ipi_virq_base))
+		return;
 
-		if (ops & (1 << IPI_RESCHEDULE)) {
-			stats[IPI_RESCHEDULE]++;
-			scheduler_ipi();
-		}
+	for (i = 0; i < nr_ipi; i++)
+		disable_percpu_irq(ipi_virq_base + i);
+}
 
-		if (ops & (1 << IPI_CALL_FUNC)) {
-			stats[IPI_CALL_FUNC]++;
-			generic_smp_call_function_interrupt();
-		}
+bool riscv_ipi_have_virq_range(void)
+{
+	return (ipi_virq_base) ? true : false;
+}
 
-		if (ops & (1 << IPI_CPU_STOP)) {
-			stats[IPI_CPU_STOP]++;
-			ipi_stop();
-		}
+void riscv_ipi_set_virq_range(int virq, int nr)
+{
+	int i, err;
 
-		if (ops & (1 << IPI_IRQ_WORK)) {
-			stats[IPI_IRQ_WORK]++;
-			irq_work_run();
-		}
+	if (WARN_ON(ipi_virq_base))
+		return;
 
-#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
-		if (ops & (1 << IPI_TIMER)) {
-			stats[IPI_TIMER]++;
-			tick_receive_broadcast();
-		}
-#endif
-		BUG_ON((ops >> IPI_MAX) != 0);
+	WARN_ON(nr < IPI_MAX);
+	nr_ipi = min(nr, IPI_MAX);
+	ipi_virq_base = virq;
+
+	/* Request IPIs */
+	for (i = 0; i < nr_ipi; i++) {
+		err = request_percpu_irq(ipi_virq_base + i, handle_IPI,
+					 "IPI", &ipi_virq_base);
+		WARN_ON(err);
 
-		/* Order data access and bit testing. */
-		mb();
+		ipi_desc[i] = irq_to_desc(ipi_virq_base + i);
+		irq_set_status_flags(ipi_virq_base + i, IRQ_HIDDEN);
 	}
+
+	/* Enabled IPIs for boot CPU immediately */
+	riscv_ipi_enable();
 }
+EXPORT_SYMBOL_GPL(riscv_ipi_set_virq_range);
 
 static const char * const ipi_names[] = {
 	[IPI_RESCHEDULE]	= "Rescheduling interrupts",
@@ -192,7 +191,7 @@ void show_ipi_stats(struct seq_file *p, int prec)
 		seq_printf(p, "%*s%u:%s", prec - 1, "IPI", i,
 			   prec >= 4 ? " " : "");
 		for_each_online_cpu(cpu)
-			seq_printf(p, "%10lu ", ipi_data[cpu].stats[i]);
+			seq_printf(p, "%10u ", irq_desc_kstat_cpu(ipi_desc[i], cpu));
 		seq_printf(p, " %s\n", ipi_names[i]);
 	}
 }
diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index 622f226454d5..e37036e779bb 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -30,7 +30,6 @@
 #include <asm/numa.h>
 #include <asm/tlbflush.h>
 #include <asm/sections.h>
-#include <asm/sbi.h>
 #include <asm/smp.h>
 #include <asm/alternative.h>
 
@@ -159,12 +158,12 @@ asmlinkage __visible void smp_callin(void)
 	struct mm_struct *mm = &init_mm;
 	unsigned int curr_cpuid = smp_processor_id();
 
-	riscv_clear_ipi();
-
 	/* All kernel threads share the same mm context.  */
 	mmgrab(mm);
 	current->active_mm = mm;
 
+	riscv_ipi_enable();
+
 	notify_cpu_starting(curr_cpuid);
 	numa_add_cpu(curr_cpuid);
 	update_siblings_masks(curr_cpuid);
diff --git a/drivers/clocksource/timer-clint.c b/drivers/clocksource/timer-clint.c
index 6cfe2ab73eb0..1861db1bfcbf 100644
--- a/drivers/clocksource/timer-clint.c
+++ b/drivers/clocksource/timer-clint.c
@@ -17,6 +17,8 @@
 #include <linux/sched_clock.h>
 #include <linux/io-64-nonatomic-lo-hi.h>
 #include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
 #include <linux/of_irq.h>
 #include <linux/smp.h>
 #include <linux/timex.h>
@@ -31,6 +33,7 @@
 
 /* CLINT manages IPI and Timer for RISC-V M-mode  */
 static u32 __iomem *clint_ipi_base;
+static unsigned int clint_ipi_irq;
 static u64 __iomem *clint_timer_cmp;
 static u64 __iomem *clint_timer_val;
 static unsigned long clint_timer_freq;
@@ -41,7 +44,8 @@ u64 __iomem *clint_time_val;
 EXPORT_SYMBOL(clint_time_val);
 #endif
 
-static void clint_send_ipi(const struct cpumask *target)
+static void clint_send_ipi(unsigned int parent_virq,
+			   const struct cpumask *target)
 {
 	unsigned int cpu;
 
@@ -49,14 +53,14 @@ static void clint_send_ipi(const struct cpumask *target)
 		writel(1, clint_ipi_base + cpuid_to_hartid_map(cpu));
 }
 
-static void clint_clear_ipi(void)
+static void clint_clear_ipi(unsigned int parent_virq)
 {
 	writel(0, clint_ipi_base + cpuid_to_hartid_map(smp_processor_id()));
 }
 
-static struct riscv_ipi_ops clint_ipi_ops = {
-	.ipi_inject = clint_send_ipi,
-	.ipi_clear = clint_clear_ipi,
+static struct ipi_mux_ops clint_ipi_ops = {
+	.ipi_mux_clear = clint_clear_ipi,
+	.ipi_mux_send = clint_send_ipi,
 };
 
 #ifdef CONFIG_64BIT
@@ -146,7 +150,7 @@ static irqreturn_t clint_timer_interrupt(int irq, void *dev_id)
 
 static int __init clint_timer_init_dt(struct device_node *np)
 {
-	int rc;
+	int rc, virq;
 	u32 i, nr_irqs;
 	void __iomem *base;
 	struct of_phandle_args oirq;
@@ -170,6 +174,12 @@ static int __init clint_timer_init_dt(struct device_node *np)
 			return -ENODEV;
 		}
 
+		/* Find parent irq domain and map ipi irq */
+		if (!clint_ipi_irq &&
+		    oirq.args[0] == RV_IRQ_SOFT &&
+		    irq_find_host(oirq.np))
+			clint_ipi_irq = irq_of_parse_and_map(np, i);
+
 		/* Find parent irq domain and map timer irq */
 		if (!clint_timer_irq &&
 		    oirq.args[0] == RV_IRQ_TIMER &&
@@ -177,9 +187,9 @@ static int __init clint_timer_init_dt(struct device_node *np)
 			clint_timer_irq = irq_of_parse_and_map(np, i);
 	}
 
-	/* If CLINT timer irq not found then fail */
-	if (!clint_timer_irq) {
-		pr_err("%pOFP: timer irq not found\n", np);
+	/* If CLINT ipi or timer irq not found then fail */
+	if (!clint_ipi_irq || !clint_timer_irq) {
+		pr_err("%pOFP: ipi/timer irq not found\n", np);
 		return -ENODEV;
 	}
 
@@ -228,11 +238,20 @@ static int __init clint_timer_init_dt(struct device_node *np)
 		goto fail_free_irq;
 	}
 
-	riscv_set_ipi_ops(&clint_ipi_ops);
-	clint_clear_ipi();
+	virq = ipi_mux_create(clint_ipi_irq, &clint_ipi_ops);
+	if (virq <= 0) {
+		pr_err("unable to create muxed IPIs\n");
+		rc = (virq < 0) ? virq : -ENODEV;
+		goto fail_remove_cpuhp;
+	}
+
+	riscv_ipi_set_virq_range(virq, IPI_MUX_NR_IRQS);
+	clint_clear_ipi(clint_ipi_irq);
 
 	return 0;
 
+fail_remove_cpuhp:
+	cpuhp_remove_state(CPUHP_AP_CLINT_TIMER_STARTING);
 fail_free_irq:
 	free_irq(clint_timer_irq, &clint_clock_event);
 fail_iounmap:
diff --git a/drivers/irqchip/irq-riscv-intc.c b/drivers/irqchip/irq-riscv-intc.c
index 084793a57af8..6ab688e54bc1 100644
--- a/drivers/irqchip/irq-riscv-intc.c
+++ b/drivers/irqchip/irq-riscv-intc.c
@@ -26,20 +26,7 @@ static asmlinkage void riscv_intc_irq(struct pt_regs *regs)
 	if (unlikely(cause >= BITS_PER_LONG))
 		panic("unexpected interrupt cause");
 
-	switch (cause) {
-#ifdef CONFIG_SMP
-	case RV_IRQ_SOFT:
-		/*
-		 * We only use software interrupts to pass IPIs, so if a
-		 * non-SMP system gets one, then we don't know what to do.
-		 */
-		handle_IPI(regs);
-		break;
-#endif
-	default:
-		generic_handle_domain_irq(intc_domain, cause);
-		break;
-	}
+	generic_handle_domain_irq(intc_domain, cause);
 }
 
 /*
@@ -59,18 +46,6 @@ static void riscv_intc_irq_unmask(struct irq_data *d)
 	csr_set(CSR_IE, BIT(d->hwirq));
 }
 
-static int riscv_intc_cpu_starting(unsigned int cpu)
-{
-	csr_set(CSR_IE, BIT(RV_IRQ_SOFT));
-	return 0;
-}
-
-static int riscv_intc_cpu_dying(unsigned int cpu)
-{
-	csr_clear(CSR_IE, BIT(RV_IRQ_SOFT));
-	return 0;
-}
-
 static struct irq_chip riscv_intc_chip = {
 	.name = "RISC-V INTC",
 	.irq_mask = riscv_intc_irq_mask,
@@ -87,9 +62,32 @@ static int riscv_intc_domain_map(struct irq_domain *d, unsigned int irq,
 	return 0;
 }
 
+static int riscv_intc_domain_alloc(struct irq_domain *domain,
+				   unsigned int virq, unsigned int nr_irqs,
+				   void *arg)
+{
+	int i, ret;
+	irq_hw_number_t hwirq;
+	unsigned int type = IRQ_TYPE_NONE;
+	struct irq_fwspec *fwspec = arg;
+
+	ret = irq_domain_translate_onecell(domain, fwspec, &hwirq, &type);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < nr_irqs; i++) {
+		ret = riscv_intc_domain_map(domain, virq + i, hwirq + i);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
 static const struct irq_domain_ops riscv_intc_domain_ops = {
 	.map	= riscv_intc_domain_map,
 	.xlate	= irq_domain_xlate_onecell,
+	.alloc	= riscv_intc_domain_alloc
 };
 
 static struct fwnode_handle *riscv_intc_hwnode(void)
@@ -132,11 +130,6 @@ static int __init riscv_intc_init(struct device_node *node,
 
 	riscv_set_intc_hwnode_fn(riscv_intc_hwnode);
 
-	cpuhp_setup_state(CPUHP_AP_IRQ_RISCV_STARTING,
-			  "irqchip/riscv/intc:starting",
-			  riscv_intc_cpu_starting,
-			  riscv_intc_cpu_dying);
-
 	pr_info("%d local interrupts mapped\n", BITS_PER_LONG);
 
 	return 0;
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH v6 4/7] RISC-V: Treat IPIs as normal Linux IRQs
@ 2022-04-18 10:53   ` Anup Patel
  0 siblings, 0 replies; 22+ messages in thread
From: Anup Patel @ 2022-04-18 10:53 UTC (permalink / raw)
  To: Palmer Dabbelt, Paul Walmsley, Thomas Gleixner, Marc Zyngier,
	Daniel Lezcano
  Cc: Atish Patra, Alistair Francis, Anup Patel, linux-riscv,
	linux-kernel, Anup Patel

Currently, the RISC-V kernel provides arch specific hooks (i.e.
struct riscv_ipi_ops) to register IPI handling methods. The stats
gathering of IPIs is also arch specific in the RISC-V kernel.

Other architectures (such as ARM, ARM64, and MIPS) have moved away
from custom arch specific IPI handling methods. Currently, these
architectures have Linux irqchip drivers providing a range of Linux
IRQ numbers to be used as IPIs and IPI triggering is done using
generic IPI APIs. This approach allows architectures to treat IPIs
as normal Linux IRQs and IPI stats gathering is done by the generic
Linux IRQ subsystem.

We extend the RISC-V IPI handling as-per above approach so that arch
specific IPI handling methods (struct riscv_ipi_ops) can be removed
and the IPI handling is done through the Linux IRQ subsystem.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 arch/riscv/Kconfig                |   2 +
 arch/riscv/include/asm/sbi.h      |   2 +
 arch/riscv/include/asm/smp.h      |  35 ++++---
 arch/riscv/kernel/Makefile        |   1 +
 arch/riscv/kernel/cpu-hotplug.c   |   3 +-
 arch/riscv/kernel/irq.c           |   3 +-
 arch/riscv/kernel/sbi-ipi.c       |  60 ++++++++++++
 arch/riscv/kernel/sbi.c           |  17 ----
 arch/riscv/kernel/smp.c           | 153 +++++++++++++++---------------
 arch/riscv/kernel/smpboot.c       |   5 +-
 drivers/clocksource/timer-clint.c |  41 +++++---
 drivers/irqchip/irq-riscv-intc.c  |  55 +++++------
 12 files changed, 222 insertions(+), 155 deletions(-)
 create mode 100644 arch/riscv/kernel/sbi-ipi.c

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 00fd9c548f26..658dfa05ed18 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -57,6 +57,8 @@ config RISCV
 	select GENERIC_GETTIMEOFDAY if HAVE_GENERIC_VDSO
 	select GENERIC_IDLE_POLL_SETUP
 	select GENERIC_IOREMAP if MMU
+	select GENERIC_IRQ_IPI
+	select GENERIC_IRQ_IPI_MUX
 	select GENERIC_IRQ_MULTI_HANDLER
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IRQ_SHOW_LEVEL
diff --git a/arch/riscv/include/asm/sbi.h b/arch/riscv/include/asm/sbi.h
index 9e3c2cf1edaf..72a5426364ab 100644
--- a/arch/riscv/include/asm/sbi.h
+++ b/arch/riscv/include/asm/sbi.h
@@ -228,6 +228,7 @@ struct sbiret {
 };
 
 void sbi_init(void);
+void sbi_ipi_init(void);
 struct sbiret sbi_ecall(int ext, int fid, unsigned long arg0,
 			unsigned long arg1, unsigned long arg2,
 			unsigned long arg3, unsigned long arg4,
@@ -297,6 +298,7 @@ static inline unsigned long sbi_mk_version(unsigned long major,
 int sbi_err_map_linux_errno(int err);
 #else /* CONFIG_RISCV_SBI */
 static inline int sbi_remote_fence_i(const struct cpumask *cpu_mask) { return -1; }
+static inline void sbi_ipi_init(void) { }
 static inline void sbi_init(void) {}
 #endif /* CONFIG_RISCV_SBI */
 #endif /* _ASM_RISCV_SBI_H */
diff --git a/arch/riscv/include/asm/smp.h b/arch/riscv/include/asm/smp.h
index 23170c933d73..178fe4ada592 100644
--- a/arch/riscv/include/asm/smp.h
+++ b/arch/riscv/include/asm/smp.h
@@ -15,11 +15,6 @@
 struct seq_file;
 extern unsigned long boot_cpu_hartid;
 
-struct riscv_ipi_ops {
-	void (*ipi_inject)(const struct cpumask *target);
-	void (*ipi_clear)(void);
-};
-
 #ifdef CONFIG_SMP
 /*
  * Mapping between linux logical cpu index and hartid.
@@ -33,9 +28,6 @@ void show_ipi_stats(struct seq_file *p, int prec);
 /* SMP initialization hook for setup_arch */
 void __init setup_smp(void);
 
-/* Called from C code, this handles an IPI. */
-void handle_IPI(struct pt_regs *regs);
-
 /* Hook for the generic smp_call_function_many() routine. */
 void arch_send_call_function_ipi_mask(struct cpumask *mask);
 
@@ -44,11 +36,17 @@ void arch_send_call_function_single_ipi(int cpu);
 
 int riscv_hartid_to_cpuid(int hartid);
 
-/* Set custom IPI operations */
-void riscv_set_ipi_ops(const struct riscv_ipi_ops *ops);
+/* Enable IPI for CPU hotplug */
+void riscv_ipi_enable(void);
+
+/* Disable IPI for CPU hotplug */
+void riscv_ipi_disable(void);
 
-/* Clear IPI for current CPU */
-void riscv_clear_ipi(void);
+/* Check if IPI interrupt numbers are available */
+bool riscv_ipi_have_virq_range(void);
+
+/* Set the IPI interrupt numbers for arch (called by irqchip drivers) */
+void riscv_ipi_set_virq_range(int virq, int nr_irqs);
 
 /* Secondary hart entry */
 asmlinkage void smp_callin(void);
@@ -82,11 +80,20 @@ static inline unsigned long cpuid_to_hartid_map(int cpu)
 	return boot_cpu_hartid;
 }
 
-static inline void riscv_set_ipi_ops(const struct riscv_ipi_ops *ops)
+static inline void riscv_ipi_enable(void)
 {
 }
 
-static inline void riscv_clear_ipi(void)
+static inline void riscv_ipi_disable(void)
+{
+}
+
+static inline bool riscv_ipi_have_virq_range(void)
+{
+	return false;
+}
+
+static inline void riscv_ipi_set_virq_range(int virq, int nr)
 {
 }
 
diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
index 87adbe47bc15..2390510d877a 100644
--- a/arch/riscv/kernel/Makefile
+++ b/arch/riscv/kernel/Makefile
@@ -58,6 +58,7 @@ obj-$(CONFIG_TRACE_IRQFLAGS)	+= trace_irq.o
 obj-$(CONFIG_PERF_EVENTS)	+= perf_callchain.o
 obj-$(CONFIG_HAVE_PERF_REGS)	+= perf_regs.o
 obj-$(CONFIG_RISCV_SBI)		+= sbi.o
+obj-$(CONFIG_RISCV_SBI)		+= sbi-ipi.o
 ifeq ($(CONFIG_RISCV_SBI), y)
 obj-$(CONFIG_SMP) += cpu_ops_sbi.o
 endif
diff --git a/arch/riscv/kernel/cpu-hotplug.c b/arch/riscv/kernel/cpu-hotplug.c
index f7a832e3a1d1..39235cf50652 100644
--- a/arch/riscv/kernel/cpu-hotplug.c
+++ b/arch/riscv/kernel/cpu-hotplug.c
@@ -13,7 +13,7 @@
 #include <asm/irq.h>
 #include <asm/cpu_ops.h>
 #include <asm/numa.h>
-#include <asm/sbi.h>
+#include <asm/smp.h>
 
 bool cpu_has_hotplug(unsigned int cpu)
 {
@@ -43,6 +43,7 @@ int __cpu_disable(void)
 	remove_cpu_topology(cpu);
 	numa_remove_cpu(cpu);
 	set_cpu_online(cpu, false);
+	riscv_ipi_disable();
 	irq_migrate_all_off_this_cpu();
 
 	return ret;
diff --git a/arch/riscv/kernel/irq.c b/arch/riscv/kernel/irq.c
index 96d3171f0ca1..eb9a68a539e6 100644
--- a/arch/riscv/kernel/irq.c
+++ b/arch/riscv/kernel/irq.c
@@ -10,7 +10,7 @@
 #include <linux/irqdomain.h>
 #include <linux/module.h>
 #include <linux/seq_file.h>
-#include <asm/smp.h>
+#include <asm/sbi.h>
 
 static struct fwnode_handle *(*__get_intc_node)(void);
 
@@ -39,4 +39,5 @@ void __init init_IRQ(void)
 	irqchip_init();
 	if (!handle_arch_irq)
 		panic("No interrupt controller found.");
+	sbi_ipi_init();
 }
diff --git a/arch/riscv/kernel/sbi-ipi.c b/arch/riscv/kernel/sbi-ipi.c
new file mode 100644
index 000000000000..67f213ec2b04
--- /dev/null
+++ b/arch/riscv/kernel/sbi-ipi.c
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Multiplex several IPIs over a single HW IPI.
+ *
+ * Copyright (c) 2022 Ventana Micro Systems Inc.
+ */
+
+#define pr_fmt(fmt) "riscv: " fmt
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <asm/sbi.h>
+
+static void sbi_send_cpumask_ipi(unsigned int parent_virq,
+				 const struct cpumask *target)
+{
+	sbi_send_ipi(target);
+}
+
+static void sbi_ipi_clear(unsigned int parent_virq)
+{
+	csr_clear(CSR_IP, IE_SIE);
+}
+
+static struct ipi_mux_ops sbi_ipi_ops = {
+	.ipi_mux_clear = sbi_ipi_clear,
+	.ipi_mux_send = sbi_send_cpumask_ipi,
+};
+
+void __init sbi_ipi_init(void)
+{
+	int virq, parent_virq;
+	struct irq_domain *domain;
+
+	if (riscv_ipi_have_virq_range())
+		return;
+
+	domain = irq_find_matching_fwnode(riscv_get_intc_hwnode(),
+					  DOMAIN_BUS_ANY);
+	if (!domain) {
+		pr_err("unable to find INTC IRQ domain\n");
+		return;
+	}
+
+	parent_virq = irq_create_mapping(domain, RV_IRQ_SOFT);
+	if (!parent_virq) {
+		pr_err("unable to create INTC IRQ mapping\n");
+		return;
+	}
+
+	virq = ipi_mux_create(parent_virq, &sbi_ipi_ops);
+	if (virq <= 0) {
+		pr_err("unable to create muxed IPIs\n");
+		irq_dispose_mapping(parent_virq);
+		return;
+	}
+
+	riscv_ipi_set_virq_range(virq, IPI_MUX_NR_IRQS);
+	pr_info("providing IPIs using SBI IPI extension\n");
+}
diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c
index fc614650a2e3..e9f04eba0e09 100644
--- a/arch/riscv/kernel/sbi.c
+++ b/arch/riscv/kernel/sbi.c
@@ -638,21 +638,6 @@ long sbi_get_mimpid(void)
 	return __sbi_base_ecall(SBI_EXT_BASE_GET_MIMPID);
 }
 
-static void sbi_send_cpumask_ipi(const struct cpumask *target)
-{
-	sbi_send_ipi(target);
-}
-
-static void sbi_ipi_clear(void)
-{
-	csr_clear(CSR_IP, IE_SIE);
-}
-
-static const struct riscv_ipi_ops sbi_ipi_ops = {
-	.ipi_inject = sbi_send_cpumask_ipi,
-	.ipi_clear = sbi_ipi_clear
-};
-
 void __init sbi_init(void)
 {
 	int ret;
@@ -699,6 +684,4 @@ void __init sbi_init(void)
 		__sbi_send_ipi	= __sbi_send_ipi_v01;
 		__sbi_rfence	= __sbi_rfence_v01;
 	}
-
-	riscv_set_ipi_ops(&sbi_ipi_ops);
 }
diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c
index 6fd8b3cbec1b..a9f1aca38358 100644
--- a/arch/riscv/kernel/smp.c
+++ b/arch/riscv/kernel/smp.c
@@ -17,9 +17,9 @@
 #include <linux/sched.h>
 #include <linux/seq_file.h>
 #include <linux/delay.h>
+#include <linux/irq.h>
 #include <linux/irq_work.h>
 
-#include <asm/sbi.h>
 #include <asm/tlbflush.h>
 #include <asm/cacheflush.h>
 
@@ -41,11 +41,9 @@ void __init smp_setup_processor_id(void)
 	cpuid_to_hartid_map(0) = boot_cpu_hartid;
 }
 
-/* A collection of single bit ipi messages.  */
-static struct {
-	unsigned long stats[IPI_MAX] ____cacheline_aligned;
-	unsigned long bits ____cacheline_aligned;
-} ipi_data[NR_CPUS] __cacheline_aligned;
+static int ipi_virq_base __ro_after_init;
+static int nr_ipi __ro_after_init = IPI_MAX;
+static struct irq_desc *ipi_desc[IPI_MAX] __read_mostly;
 
 int riscv_hartid_to_cpuid(int hartid)
 {
@@ -77,46 +75,14 @@ static void ipi_stop(void)
 		wait_for_interrupt();
 }
 
-static const struct riscv_ipi_ops *ipi_ops __ro_after_init;
-
-void riscv_set_ipi_ops(const struct riscv_ipi_ops *ops)
-{
-	ipi_ops = ops;
-}
-EXPORT_SYMBOL_GPL(riscv_set_ipi_ops);
-
-void riscv_clear_ipi(void)
-{
-	if (ipi_ops && ipi_ops->ipi_clear)
-		ipi_ops->ipi_clear();
-}
-EXPORT_SYMBOL_GPL(riscv_clear_ipi);
-
 static void send_ipi_mask(const struct cpumask *mask, enum ipi_message_type op)
 {
-	int cpu;
-
-	smp_mb__before_atomic();
-	for_each_cpu(cpu, mask)
-		set_bit(op, &ipi_data[cpu].bits);
-	smp_mb__after_atomic();
-
-	if (ipi_ops && ipi_ops->ipi_inject)
-		ipi_ops->ipi_inject(mask);
-	else
-		pr_warn("SMP: IPI inject method not available\n");
+	__ipi_send_mask(ipi_desc[op], mask);
 }
 
 static void send_ipi_single(int cpu, enum ipi_message_type op)
 {
-	smp_mb__before_atomic();
-	set_bit(op, &ipi_data[cpu].bits);
-	smp_mb__after_atomic();
-
-	if (ipi_ops && ipi_ops->ipi_inject)
-		ipi_ops->ipi_inject(cpumask_of(cpu));
-	else
-		pr_warn("SMP: IPI inject method not available\n");
+	__ipi_send_mask(ipi_desc[op], cpumask_of(cpu));
 }
 
 #ifdef CONFIG_IRQ_WORK
@@ -126,55 +92,88 @@ void arch_irq_work_raise(void)
 }
 #endif
 
-void handle_IPI(struct pt_regs *regs)
+static irqreturn_t handle_IPI(int irq, void *data)
+{
+	int ipi = irq - ipi_virq_base;
+
+	switch (ipi) {
+	case IPI_RESCHEDULE:
+		scheduler_ipi();
+		break;
+	case IPI_CALL_FUNC:
+		generic_smp_call_function_interrupt();
+		break;
+	case IPI_CPU_STOP:
+		ipi_stop();
+		break;
+	case IPI_IRQ_WORK:
+		irq_work_run();
+		break;
+#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
+	case IPI_TIMER:
+		tick_receive_broadcast();
+		break;
+#endif
+	default:
+		pr_warn("CPU%d: unhandled IPI%d\n", smp_processor_id(), ipi);
+		break;
+	};
+
+	return IRQ_HANDLED;
+}
+
+void riscv_ipi_enable(void)
 {
-	unsigned long *pending_ipis = &ipi_data[smp_processor_id()].bits;
-	unsigned long *stats = ipi_data[smp_processor_id()].stats;
+	int i;
 
-	riscv_clear_ipi();
+	if (WARN_ON_ONCE(!ipi_virq_base))
+		return;
 
-	while (true) {
-		unsigned long ops;
+	for (i = 0; i < nr_ipi; i++)
+		enable_percpu_irq(ipi_virq_base + i, 0);
+}
 
-		/* Order bit clearing and data access. */
-		mb();
+void riscv_ipi_disable(void)
+{
+	int i;
 
-		ops = xchg(pending_ipis, 0);
-		if (ops == 0)
-			return;
+	if (WARN_ON_ONCE(!ipi_virq_base))
+		return;
 
-		if (ops & (1 << IPI_RESCHEDULE)) {
-			stats[IPI_RESCHEDULE]++;
-			scheduler_ipi();
-		}
+	for (i = 0; i < nr_ipi; i++)
+		disable_percpu_irq(ipi_virq_base + i);
+}
 
-		if (ops & (1 << IPI_CALL_FUNC)) {
-			stats[IPI_CALL_FUNC]++;
-			generic_smp_call_function_interrupt();
-		}
+bool riscv_ipi_have_virq_range(void)
+{
+	return (ipi_virq_base) ? true : false;
+}
 
-		if (ops & (1 << IPI_CPU_STOP)) {
-			stats[IPI_CPU_STOP]++;
-			ipi_stop();
-		}
+void riscv_ipi_set_virq_range(int virq, int nr)
+{
+	int i, err;
 
-		if (ops & (1 << IPI_IRQ_WORK)) {
-			stats[IPI_IRQ_WORK]++;
-			irq_work_run();
-		}
+	if (WARN_ON(ipi_virq_base))
+		return;
 
-#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
-		if (ops & (1 << IPI_TIMER)) {
-			stats[IPI_TIMER]++;
-			tick_receive_broadcast();
-		}
-#endif
-		BUG_ON((ops >> IPI_MAX) != 0);
+	WARN_ON(nr < IPI_MAX);
+	nr_ipi = min(nr, IPI_MAX);
+	ipi_virq_base = virq;
+
+	/* Request IPIs */
+	for (i = 0; i < nr_ipi; i++) {
+		err = request_percpu_irq(ipi_virq_base + i, handle_IPI,
+					 "IPI", &ipi_virq_base);
+		WARN_ON(err);
 
-		/* Order data access and bit testing. */
-		mb();
+		ipi_desc[i] = irq_to_desc(ipi_virq_base + i);
+		irq_set_status_flags(ipi_virq_base + i, IRQ_HIDDEN);
 	}
+
+	/* Enabled IPIs for boot CPU immediately */
+	riscv_ipi_enable();
 }
+EXPORT_SYMBOL_GPL(riscv_ipi_set_virq_range);
 
 static const char * const ipi_names[] = {
 	[IPI_RESCHEDULE]	= "Rescheduling interrupts",
@@ -192,7 +191,7 @@ void show_ipi_stats(struct seq_file *p, int prec)
 		seq_printf(p, "%*s%u:%s", prec - 1, "IPI", i,
 			   prec >= 4 ? " " : "");
 		for_each_online_cpu(cpu)
-			seq_printf(p, "%10lu ", ipi_data[cpu].stats[i]);
+			seq_printf(p, "%10u ", irq_desc_kstat_cpu(ipi_desc[i], cpu));
 		seq_printf(p, " %s\n", ipi_names[i]);
 	}
 }
diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
index 622f226454d5..e37036e779bb 100644
--- a/arch/riscv/kernel/smpboot.c
+++ b/arch/riscv/kernel/smpboot.c
@@ -30,7 +30,6 @@
 #include <asm/numa.h>
 #include <asm/tlbflush.h>
 #include <asm/sections.h>
-#include <asm/sbi.h>
 #include <asm/smp.h>
 #include <asm/alternative.h>
 
@@ -159,12 +158,12 @@ asmlinkage __visible void smp_callin(void)
 	struct mm_struct *mm = &init_mm;
 	unsigned int curr_cpuid = smp_processor_id();
 
-	riscv_clear_ipi();
-
 	/* All kernel threads share the same mm context.  */
 	mmgrab(mm);
 	current->active_mm = mm;
 
+	riscv_ipi_enable();
+
 	notify_cpu_starting(curr_cpuid);
 	numa_add_cpu(curr_cpuid);
 	update_siblings_masks(curr_cpuid);
diff --git a/drivers/clocksource/timer-clint.c b/drivers/clocksource/timer-clint.c
index 6cfe2ab73eb0..1861db1bfcbf 100644
--- a/drivers/clocksource/timer-clint.c
+++ b/drivers/clocksource/timer-clint.c
@@ -17,6 +17,8 @@
 #include <linux/sched_clock.h>
 #include <linux/io-64-nonatomic-lo-hi.h>
 #include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
 #include <linux/of_irq.h>
 #include <linux/smp.h>
 #include <linux/timex.h>
@@ -31,6 +33,7 @@
 
 /* CLINT manages IPI and Timer for RISC-V M-mode  */
 static u32 __iomem *clint_ipi_base;
+static unsigned int clint_ipi_irq;
 static u64 __iomem *clint_timer_cmp;
 static u64 __iomem *clint_timer_val;
 static unsigned long clint_timer_freq;
@@ -41,7 +44,8 @@ u64 __iomem *clint_time_val;
 EXPORT_SYMBOL(clint_time_val);
 #endif
 
-static void clint_send_ipi(const struct cpumask *target)
+static void clint_send_ipi(unsigned int parent_virq,
+			   const struct cpumask *target)
 {
 	unsigned int cpu;
 
@@ -49,14 +53,14 @@ static void clint_send_ipi(const struct cpumask *target)
 		writel(1, clint_ipi_base + cpuid_to_hartid_map(cpu));
 }
 
-static void clint_clear_ipi(void)
+static void clint_clear_ipi(unsigned int parent_virq)
 {
 	writel(0, clint_ipi_base + cpuid_to_hartid_map(smp_processor_id()));
 }
 
-static struct riscv_ipi_ops clint_ipi_ops = {
-	.ipi_inject = clint_send_ipi,
-	.ipi_clear = clint_clear_ipi,
+static struct ipi_mux_ops clint_ipi_ops = {
+	.ipi_mux_clear = clint_clear_ipi,
+	.ipi_mux_send = clint_send_ipi,
 };
 
 #ifdef CONFIG_64BIT
@@ -146,7 +150,7 @@ static irqreturn_t clint_timer_interrupt(int irq, void *dev_id)
 
 static int __init clint_timer_init_dt(struct device_node *np)
 {
-	int rc;
+	int rc, virq;
 	u32 i, nr_irqs;
 	void __iomem *base;
 	struct of_phandle_args oirq;
@@ -170,6 +174,12 @@ static int __init clint_timer_init_dt(struct device_node *np)
 			return -ENODEV;
 		}
 
+		/* Find parent irq domain and map ipi irq */
+		if (!clint_ipi_irq &&
+		    oirq.args[0] == RV_IRQ_SOFT &&
+		    irq_find_host(oirq.np))
+			clint_ipi_irq = irq_of_parse_and_map(np, i);
+
 		/* Find parent irq domain and map timer irq */
 		if (!clint_timer_irq &&
 		    oirq.args[0] == RV_IRQ_TIMER &&
@@ -177,9 +187,9 @@ static int __init clint_timer_init_dt(struct device_node *np)
 			clint_timer_irq = irq_of_parse_and_map(np, i);
 	}
 
-	/* If CLINT timer irq not found then fail */
-	if (!clint_timer_irq) {
-		pr_err("%pOFP: timer irq not found\n", np);
+	/* If CLINT ipi or timer irq not found then fail */
+	if (!clint_ipi_irq || !clint_timer_irq) {
+		pr_err("%pOFP: ipi/timer irq not found\n", np);
 		return -ENODEV;
 	}
 
@@ -228,11 +238,20 @@ static int __init clint_timer_init_dt(struct device_node *np)
 		goto fail_free_irq;
 	}
 
-	riscv_set_ipi_ops(&clint_ipi_ops);
-	clint_clear_ipi();
+	virq = ipi_mux_create(clint_ipi_irq, &clint_ipi_ops);
+	if (virq <= 0) {
+		pr_err("unable to create muxed IPIs\n");
+		rc = (virq < 0) ? virq : -ENODEV;
+		goto fail_remove_cpuhp;
+	}
+
+	riscv_ipi_set_virq_range(virq, IPI_MUX_NR_IRQS);
+	clint_clear_ipi(clint_ipi_irq);
 
 	return 0;
 
+fail_remove_cpuhp:
+	cpuhp_remove_state(CPUHP_AP_CLINT_TIMER_STARTING);
 fail_free_irq:
 	free_irq(clint_timer_irq, &clint_clock_event);
 fail_iounmap:
diff --git a/drivers/irqchip/irq-riscv-intc.c b/drivers/irqchip/irq-riscv-intc.c
index 084793a57af8..6ab688e54bc1 100644
--- a/drivers/irqchip/irq-riscv-intc.c
+++ b/drivers/irqchip/irq-riscv-intc.c
@@ -26,20 +26,7 @@ static asmlinkage void riscv_intc_irq(struct pt_regs *regs)
 	if (unlikely(cause >= BITS_PER_LONG))
 		panic("unexpected interrupt cause");
 
-	switch (cause) {
-#ifdef CONFIG_SMP
-	case RV_IRQ_SOFT:
-		/*
-		 * We only use software interrupts to pass IPIs, so if a
-		 * non-SMP system gets one, then we don't know what to do.
-		 */
-		handle_IPI(regs);
-		break;
-#endif
-	default:
-		generic_handle_domain_irq(intc_domain, cause);
-		break;
-	}
+	generic_handle_domain_irq(intc_domain, cause);
 }
 
 /*
@@ -59,18 +46,6 @@ static void riscv_intc_irq_unmask(struct irq_data *d)
 	csr_set(CSR_IE, BIT(d->hwirq));
 }
 
-static int riscv_intc_cpu_starting(unsigned int cpu)
-{
-	csr_set(CSR_IE, BIT(RV_IRQ_SOFT));
-	return 0;
-}
-
-static int riscv_intc_cpu_dying(unsigned int cpu)
-{
-	csr_clear(CSR_IE, BIT(RV_IRQ_SOFT));
-	return 0;
-}
-
 static struct irq_chip riscv_intc_chip = {
 	.name = "RISC-V INTC",
 	.irq_mask = riscv_intc_irq_mask,
@@ -87,9 +62,32 @@ static int riscv_intc_domain_map(struct irq_domain *d, unsigned int irq,
 	return 0;
 }
 
+static int riscv_intc_domain_alloc(struct irq_domain *domain,
+				   unsigned int virq, unsigned int nr_irqs,
+				   void *arg)
+{
+	int i, ret;
+	irq_hw_number_t hwirq;
+	unsigned int type = IRQ_TYPE_NONE;
+	struct irq_fwspec *fwspec = arg;
+
+	ret = irq_domain_translate_onecell(domain, fwspec, &hwirq, &type);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < nr_irqs; i++) {
+		ret = riscv_intc_domain_map(domain, virq + i, hwirq + i);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
 static const struct irq_domain_ops riscv_intc_domain_ops = {
 	.map	= riscv_intc_domain_map,
 	.xlate	= irq_domain_xlate_onecell,
+	.alloc	= riscv_intc_domain_alloc
 };
 
 static struct fwnode_handle *riscv_intc_hwnode(void)
@@ -132,11 +130,6 @@ static int __init riscv_intc_init(struct device_node *node,
 
 	riscv_set_intc_hwnode_fn(riscv_intc_hwnode);
 
-	cpuhp_setup_state(CPUHP_AP_IRQ_RISCV_STARTING,
-			  "irqchip/riscv/intc:starting",
-			  riscv_intc_cpu_starting,
-			  riscv_intc_cpu_dying);
-
 	pr_info("%d local interrupts mapped\n", BITS_PER_LONG);
 
 	return 0;
-- 
2.25.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH v6 5/7] RISC-V: Allow marking IPIs as suitable for remote FENCEs
  2022-04-18 10:52 ` Anup Patel
@ 2022-04-18 10:53   ` Anup Patel
  -1 siblings, 0 replies; 22+ messages in thread
From: Anup Patel @ 2022-04-18 10:53 UTC (permalink / raw)
  To: Palmer Dabbelt, Paul Walmsley, Thomas Gleixner, Marc Zyngier,
	Daniel Lezcano
  Cc: Atish Patra, Alistair Francis, Anup Patel, linux-riscv,
	linux-kernel, Anup Patel

To do remote FENCEs (i.e. remote TLB flushes) using IPI calls on the
RISC-V kernel, we need hardware mechanism to directly inject IPI from
the supervisor mode (i.e. RISC-V kernel) instead of using SBI calls.

The upcoming AIA IMSIC devices allow direct IPI injection from the
supervisor mode (i.e. RISC-V kernel). To support this, we extend the
riscv_ipi_set_virq_range() function so that IPI provider (i.e. irqchip
drivers can mark IPIs as suitable for remote FENCEs.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 arch/riscv/include/asm/smp.h      | 18 ++++++++++++++++--
 arch/riscv/kernel/sbi-ipi.c       |  2 +-
 arch/riscv/kernel/smp.c           | 11 ++++++++++-
 drivers/clocksource/timer-clint.c |  2 +-
 4 files changed, 28 insertions(+), 5 deletions(-)

diff --git a/arch/riscv/include/asm/smp.h b/arch/riscv/include/asm/smp.h
index 178fe4ada592..ddd3be1c77b6 100644
--- a/arch/riscv/include/asm/smp.h
+++ b/arch/riscv/include/asm/smp.h
@@ -16,6 +16,9 @@ struct seq_file;
 extern unsigned long boot_cpu_hartid;
 
 #ifdef CONFIG_SMP
+
+#include <linux/jump_label.h>
+
 /*
  * Mapping between linux logical cpu index and hartid.
  */
@@ -46,7 +49,12 @@ void riscv_ipi_disable(void);
 bool riscv_ipi_have_virq_range(void);
 
 /* Set the IPI interrupt numbers for arch (called by irqchip drivers) */
-void riscv_ipi_set_virq_range(int virq, int nr_irqs);
+void riscv_ipi_set_virq_range(int virq, int nr_irqs, bool use_for_rfence);
+
+/* Check if we can use IPIs for remote FENCEs */
+DECLARE_STATIC_KEY_FALSE(riscv_ipi_for_rfence);
+#define riscv_use_ipi_for_rfence() \
+	static_branch_unlikely(&riscv_ipi_for_rfence)
 
 /* Secondary hart entry */
 asmlinkage void smp_callin(void);
@@ -93,10 +101,16 @@ static inline bool riscv_ipi_have_virq_range(void)
 	return false;
 }
 
-static inline void riscv_ipi_set_virq_range(int virq, int nr)
+static inline void riscv_ipi_set_virq_range(int virq, int nr,
+					    bool use_for_rfence)
 {
 }
 
+static inline bool riscv_use_ipi_for_rfence(void)
+{
+	return false;
+}
+
 #endif /* CONFIG_SMP */
 
 #if defined(CONFIG_HOTPLUG_CPU) && (CONFIG_SMP)
diff --git a/arch/riscv/kernel/sbi-ipi.c b/arch/riscv/kernel/sbi-ipi.c
index 67f213ec2b04..ce26d62146de 100644
--- a/arch/riscv/kernel/sbi-ipi.c
+++ b/arch/riscv/kernel/sbi-ipi.c
@@ -55,6 +55,6 @@ void __init sbi_ipi_init(void)
 		return;
 	}
 
-	riscv_ipi_set_virq_range(virq, IPI_MUX_NR_IRQS);
+	riscv_ipi_set_virq_range(virq, IPI_MUX_NR_IRQS, false);
 	pr_info("providing IPIs using SBI IPI extension\n");
 }
diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c
index a9f1aca38358..b98d9c319f6f 100644
--- a/arch/riscv/kernel/smp.c
+++ b/arch/riscv/kernel/smp.c
@@ -149,7 +149,10 @@ bool riscv_ipi_have_virq_range(void)
 	return (ipi_virq_base) ? true : false;
 }
 
-void riscv_ipi_set_virq_range(int virq, int nr)
+DEFINE_STATIC_KEY_FALSE(riscv_ipi_for_rfence);
+EXPORT_SYMBOL_GPL(riscv_ipi_for_rfence);
+
+void riscv_ipi_set_virq_range(int virq, int nr, bool use_for_rfence)
 {
 	int i, err;
 
@@ -172,6 +175,12 @@ void riscv_ipi_set_virq_range(int virq, int nr)
 
 	/* Enabled IPIs for boot CPU immediately */
 	riscv_ipi_enable();
+
+	/* Update RFENCE static key */
+	if (use_for_rfence)
+		static_branch_enable(&riscv_ipi_for_rfence);
+	else
+		static_branch_disable(&riscv_ipi_for_rfence);
 }
 EXPORT_SYMBOL_GPL(riscv_ipi_set_virq_range);
 
diff --git a/drivers/clocksource/timer-clint.c b/drivers/clocksource/timer-clint.c
index 1861db1bfcbf..eb80bf79dc93 100644
--- a/drivers/clocksource/timer-clint.c
+++ b/drivers/clocksource/timer-clint.c
@@ -245,7 +245,7 @@ static int __init clint_timer_init_dt(struct device_node *np)
 		goto fail_remove_cpuhp;
 	}
 
-	riscv_ipi_set_virq_range(virq, IPI_MUX_NR_IRQS);
+	riscv_ipi_set_virq_range(virq, IPI_MUX_NR_IRQS, true);
 	clint_clear_ipi(clint_ipi_irq);
 
 	return 0;
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH v6 5/7] RISC-V: Allow marking IPIs as suitable for remote FENCEs
@ 2022-04-18 10:53   ` Anup Patel
  0 siblings, 0 replies; 22+ messages in thread
From: Anup Patel @ 2022-04-18 10:53 UTC (permalink / raw)
  To: Palmer Dabbelt, Paul Walmsley, Thomas Gleixner, Marc Zyngier,
	Daniel Lezcano
  Cc: Atish Patra, Alistair Francis, Anup Patel, linux-riscv,
	linux-kernel, Anup Patel

To do remote FENCEs (i.e. remote TLB flushes) using IPI calls on the
RISC-V kernel, we need hardware mechanism to directly inject IPI from
the supervisor mode (i.e. RISC-V kernel) instead of using SBI calls.

The upcoming AIA IMSIC devices allow direct IPI injection from the
supervisor mode (i.e. RISC-V kernel). To support this, we extend the
riscv_ipi_set_virq_range() function so that IPI provider (i.e. irqchip
drivers can mark IPIs as suitable for remote FENCEs.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 arch/riscv/include/asm/smp.h      | 18 ++++++++++++++++--
 arch/riscv/kernel/sbi-ipi.c       |  2 +-
 arch/riscv/kernel/smp.c           | 11 ++++++++++-
 drivers/clocksource/timer-clint.c |  2 +-
 4 files changed, 28 insertions(+), 5 deletions(-)

diff --git a/arch/riscv/include/asm/smp.h b/arch/riscv/include/asm/smp.h
index 178fe4ada592..ddd3be1c77b6 100644
--- a/arch/riscv/include/asm/smp.h
+++ b/arch/riscv/include/asm/smp.h
@@ -16,6 +16,9 @@ struct seq_file;
 extern unsigned long boot_cpu_hartid;
 
 #ifdef CONFIG_SMP
+
+#include <linux/jump_label.h>
+
 /*
  * Mapping between linux logical cpu index and hartid.
  */
@@ -46,7 +49,12 @@ void riscv_ipi_disable(void);
 bool riscv_ipi_have_virq_range(void);
 
 /* Set the IPI interrupt numbers for arch (called by irqchip drivers) */
-void riscv_ipi_set_virq_range(int virq, int nr_irqs);
+void riscv_ipi_set_virq_range(int virq, int nr_irqs, bool use_for_rfence);
+
+/* Check if we can use IPIs for remote FENCEs */
+DECLARE_STATIC_KEY_FALSE(riscv_ipi_for_rfence);
+#define riscv_use_ipi_for_rfence() \
+	static_branch_unlikely(&riscv_ipi_for_rfence)
 
 /* Secondary hart entry */
 asmlinkage void smp_callin(void);
@@ -93,10 +101,16 @@ static inline bool riscv_ipi_have_virq_range(void)
 	return false;
 }
 
-static inline void riscv_ipi_set_virq_range(int virq, int nr)
+static inline void riscv_ipi_set_virq_range(int virq, int nr,
+					    bool use_for_rfence)
 {
 }
 
+static inline bool riscv_use_ipi_for_rfence(void)
+{
+	return false;
+}
+
 #endif /* CONFIG_SMP */
 
 #if defined(CONFIG_HOTPLUG_CPU) && (CONFIG_SMP)
diff --git a/arch/riscv/kernel/sbi-ipi.c b/arch/riscv/kernel/sbi-ipi.c
index 67f213ec2b04..ce26d62146de 100644
--- a/arch/riscv/kernel/sbi-ipi.c
+++ b/arch/riscv/kernel/sbi-ipi.c
@@ -55,6 +55,6 @@ void __init sbi_ipi_init(void)
 		return;
 	}
 
-	riscv_ipi_set_virq_range(virq, IPI_MUX_NR_IRQS);
+	riscv_ipi_set_virq_range(virq, IPI_MUX_NR_IRQS, false);
 	pr_info("providing IPIs using SBI IPI extension\n");
 }
diff --git a/arch/riscv/kernel/smp.c b/arch/riscv/kernel/smp.c
index a9f1aca38358..b98d9c319f6f 100644
--- a/arch/riscv/kernel/smp.c
+++ b/arch/riscv/kernel/smp.c
@@ -149,7 +149,10 @@ bool riscv_ipi_have_virq_range(void)
 	return (ipi_virq_base) ? true : false;
 }
 
-void riscv_ipi_set_virq_range(int virq, int nr)
+DEFINE_STATIC_KEY_FALSE(riscv_ipi_for_rfence);
+EXPORT_SYMBOL_GPL(riscv_ipi_for_rfence);
+
+void riscv_ipi_set_virq_range(int virq, int nr, bool use_for_rfence)
 {
 	int i, err;
 
@@ -172,6 +175,12 @@ void riscv_ipi_set_virq_range(int virq, int nr)
 
 	/* Enabled IPIs for boot CPU immediately */
 	riscv_ipi_enable();
+
+	/* Update RFENCE static key */
+	if (use_for_rfence)
+		static_branch_enable(&riscv_ipi_for_rfence);
+	else
+		static_branch_disable(&riscv_ipi_for_rfence);
 }
 EXPORT_SYMBOL_GPL(riscv_ipi_set_virq_range);
 
diff --git a/drivers/clocksource/timer-clint.c b/drivers/clocksource/timer-clint.c
index 1861db1bfcbf..eb80bf79dc93 100644
--- a/drivers/clocksource/timer-clint.c
+++ b/drivers/clocksource/timer-clint.c
@@ -245,7 +245,7 @@ static int __init clint_timer_init_dt(struct device_node *np)
 		goto fail_remove_cpuhp;
 	}
 
-	riscv_ipi_set_virq_range(virq, IPI_MUX_NR_IRQS);
+	riscv_ipi_set_virq_range(virq, IPI_MUX_NR_IRQS, true);
 	clint_clear_ipi(clint_ipi_irq);
 
 	return 0;
-- 
2.25.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH v6 6/7] RISC-V: Use IPIs for remote TLB flush when possible
  2022-04-18 10:52 ` Anup Patel
@ 2022-04-18 10:53   ` Anup Patel
  -1 siblings, 0 replies; 22+ messages in thread
From: Anup Patel @ 2022-04-18 10:53 UTC (permalink / raw)
  To: Palmer Dabbelt, Paul Walmsley, Thomas Gleixner, Marc Zyngier,
	Daniel Lezcano
  Cc: Atish Patra, Alistair Francis, Anup Patel, linux-riscv,
	linux-kernel, Anup Patel

If we have specialized interrupt controller (such as AIA IMSIC) which
allows supervisor mode to directly inject IPIs without any assistance
from M-mode or HS-mode then using such specialized interrupt controller,
we can do remote TLB flushes directly from supervisor mode instead of
using the SBI RFENCE calls.

This patch extends remote TLB flush functions to use supervisor mode
IPIs whenever direct supervisor mode IPIs.are supported by interrupt
controller.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 arch/riscv/mm/tlbflush.c | 93 +++++++++++++++++++++++++++++++++-------
 1 file changed, 78 insertions(+), 15 deletions(-)

diff --git a/arch/riscv/mm/tlbflush.c b/arch/riscv/mm/tlbflush.c
index 37ed760d007c..27a7db8eb2c4 100644
--- a/arch/riscv/mm/tlbflush.c
+++ b/arch/riscv/mm/tlbflush.c
@@ -23,14 +23,62 @@ static inline void local_flush_tlb_page_asid(unsigned long addr,
 			: "memory");
 }
 
+static inline void local_flush_tlb_range(unsigned long start,
+		unsigned long size, unsigned long stride)
+{
+	if (size <= stride)
+		local_flush_tlb_page(start);
+	else
+		local_flush_tlb_all();
+}
+
+static inline void local_flush_tlb_range_asid(unsigned long start,
+		unsigned long size, unsigned long stride, unsigned long asid)
+{
+	if (size <= stride)
+		local_flush_tlb_page_asid(start, asid);
+	else
+		local_flush_tlb_all_asid(asid);
+}
+
+static void __ipi_flush_tlb_all(void *info)
+{
+	local_flush_tlb_all();
+}
+
 void flush_tlb_all(void)
 {
-	sbi_remote_sfence_vma(NULL, 0, -1);
+	if (riscv_use_ipi_for_rfence())
+		on_each_cpu(__ipi_flush_tlb_all, NULL, 1);
+	else
+		sbi_remote_sfence_vma(NULL, 0, -1);
+}
+
+struct flush_tlb_range_data {
+	unsigned long asid;
+	unsigned long start;
+	unsigned long size;
+	unsigned long stride;
+};
+
+static void __ipi_flush_tlb_range_asid(void *info)
+{
+	struct flush_tlb_range_data *d = info;
+
+	local_flush_tlb_range_asid(d->start, d->size, d->stride, d->asid);
+}
+
+static void __ipi_flush_tlb_range(void *info)
+{
+	struct flush_tlb_range_data *d = info;
+
+	local_flush_tlb_range(d->start, d->size, d->stride);
 }
 
-static void __sbi_tlb_flush_range(struct mm_struct *mm, unsigned long start,
-				  unsigned long size, unsigned long stride)
+static void __flush_tlb_range(struct mm_struct *mm, unsigned long start,
+			      unsigned long size, unsigned long stride)
 {
+	struct flush_tlb_range_data ftd;
 	struct cpumask *cmask = mm_cpumask(mm);
 	unsigned int cpuid;
 	bool broadcast;
@@ -45,19 +93,34 @@ static void __sbi_tlb_flush_range(struct mm_struct *mm, unsigned long start,
 		unsigned long asid = atomic_long_read(&mm->context.id);
 
 		if (broadcast) {
-			sbi_remote_sfence_vma_asid(cmask, start, size, asid);
-		} else if (size <= stride) {
-			local_flush_tlb_page_asid(start, asid);
+			if (riscv_use_ipi_for_rfence()) {
+				ftd.asid = asid;
+				ftd.start = start;
+				ftd.size = size;
+				ftd.stride = stride;
+				on_each_cpu_mask(cmask,
+						 __ipi_flush_tlb_range_asid,
+						 &ftd, 1);
+			} else
+				sbi_remote_sfence_vma_asid(cmask,
+							   start, size, asid);
 		} else {
-			local_flush_tlb_all_asid(asid);
+			local_flush_tlb_range_asid(start, size, stride, asid);
 		}
 	} else {
 		if (broadcast) {
-			sbi_remote_sfence_vma(cmask, start, size);
-		} else if (size <= stride) {
-			local_flush_tlb_page(start);
+			if (riscv_use_ipi_for_rfence()) {
+				ftd.asid = 0;
+				ftd.start = start;
+				ftd.size = size;
+				ftd.stride = stride;
+				on_each_cpu_mask(cmask,
+						 __ipi_flush_tlb_range,
+						 &ftd, 1);
+			} else
+				sbi_remote_sfence_vma(cmask, start, size);
 		} else {
-			local_flush_tlb_all();
+			local_flush_tlb_range(start, size, stride);
 		}
 	}
 
@@ -66,23 +129,23 @@ static void __sbi_tlb_flush_range(struct mm_struct *mm, unsigned long start,
 
 void flush_tlb_mm(struct mm_struct *mm)
 {
-	__sbi_tlb_flush_range(mm, 0, -1, PAGE_SIZE);
+	__flush_tlb_range(mm, 0, -1, PAGE_SIZE);
 }
 
 void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
 {
-	__sbi_tlb_flush_range(vma->vm_mm, addr, PAGE_SIZE, PAGE_SIZE);
+	__flush_tlb_range(vma->vm_mm, addr, PAGE_SIZE, PAGE_SIZE);
 }
 
 void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 		     unsigned long end)
 {
-	__sbi_tlb_flush_range(vma->vm_mm, start, end - start, PAGE_SIZE);
+	__flush_tlb_range(vma->vm_mm, start, end - start, PAGE_SIZE);
 }
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 void flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start,
 			unsigned long end)
 {
-	__sbi_tlb_flush_range(vma->vm_mm, start, end - start, PMD_SIZE);
+	__flush_tlb_range(vma->vm_mm, start, end - start, PMD_SIZE);
 }
 #endif
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH v6 6/7] RISC-V: Use IPIs for remote TLB flush when possible
@ 2022-04-18 10:53   ` Anup Patel
  0 siblings, 0 replies; 22+ messages in thread
From: Anup Patel @ 2022-04-18 10:53 UTC (permalink / raw)
  To: Palmer Dabbelt, Paul Walmsley, Thomas Gleixner, Marc Zyngier,
	Daniel Lezcano
  Cc: Atish Patra, Alistair Francis, Anup Patel, linux-riscv,
	linux-kernel, Anup Patel

If we have specialized interrupt controller (such as AIA IMSIC) which
allows supervisor mode to directly inject IPIs without any assistance
from M-mode or HS-mode then using such specialized interrupt controller,
we can do remote TLB flushes directly from supervisor mode instead of
using the SBI RFENCE calls.

This patch extends remote TLB flush functions to use supervisor mode
IPIs whenever direct supervisor mode IPIs.are supported by interrupt
controller.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 arch/riscv/mm/tlbflush.c | 93 +++++++++++++++++++++++++++++++++-------
 1 file changed, 78 insertions(+), 15 deletions(-)

diff --git a/arch/riscv/mm/tlbflush.c b/arch/riscv/mm/tlbflush.c
index 37ed760d007c..27a7db8eb2c4 100644
--- a/arch/riscv/mm/tlbflush.c
+++ b/arch/riscv/mm/tlbflush.c
@@ -23,14 +23,62 @@ static inline void local_flush_tlb_page_asid(unsigned long addr,
 			: "memory");
 }
 
+static inline void local_flush_tlb_range(unsigned long start,
+		unsigned long size, unsigned long stride)
+{
+	if (size <= stride)
+		local_flush_tlb_page(start);
+	else
+		local_flush_tlb_all();
+}
+
+static inline void local_flush_tlb_range_asid(unsigned long start,
+		unsigned long size, unsigned long stride, unsigned long asid)
+{
+	if (size <= stride)
+		local_flush_tlb_page_asid(start, asid);
+	else
+		local_flush_tlb_all_asid(asid);
+}
+
+static void __ipi_flush_tlb_all(void *info)
+{
+	local_flush_tlb_all();
+}
+
 void flush_tlb_all(void)
 {
-	sbi_remote_sfence_vma(NULL, 0, -1);
+	if (riscv_use_ipi_for_rfence())
+		on_each_cpu(__ipi_flush_tlb_all, NULL, 1);
+	else
+		sbi_remote_sfence_vma(NULL, 0, -1);
+}
+
+struct flush_tlb_range_data {
+	unsigned long asid;
+	unsigned long start;
+	unsigned long size;
+	unsigned long stride;
+};
+
+static void __ipi_flush_tlb_range_asid(void *info)
+{
+	struct flush_tlb_range_data *d = info;
+
+	local_flush_tlb_range_asid(d->start, d->size, d->stride, d->asid);
+}
+
+static void __ipi_flush_tlb_range(void *info)
+{
+	struct flush_tlb_range_data *d = info;
+
+	local_flush_tlb_range(d->start, d->size, d->stride);
 }
 
-static void __sbi_tlb_flush_range(struct mm_struct *mm, unsigned long start,
-				  unsigned long size, unsigned long stride)
+static void __flush_tlb_range(struct mm_struct *mm, unsigned long start,
+			      unsigned long size, unsigned long stride)
 {
+	struct flush_tlb_range_data ftd;
 	struct cpumask *cmask = mm_cpumask(mm);
 	unsigned int cpuid;
 	bool broadcast;
@@ -45,19 +93,34 @@ static void __sbi_tlb_flush_range(struct mm_struct *mm, unsigned long start,
 		unsigned long asid = atomic_long_read(&mm->context.id);
 
 		if (broadcast) {
-			sbi_remote_sfence_vma_asid(cmask, start, size, asid);
-		} else if (size <= stride) {
-			local_flush_tlb_page_asid(start, asid);
+			if (riscv_use_ipi_for_rfence()) {
+				ftd.asid = asid;
+				ftd.start = start;
+				ftd.size = size;
+				ftd.stride = stride;
+				on_each_cpu_mask(cmask,
+						 __ipi_flush_tlb_range_asid,
+						 &ftd, 1);
+			} else
+				sbi_remote_sfence_vma_asid(cmask,
+							   start, size, asid);
 		} else {
-			local_flush_tlb_all_asid(asid);
+			local_flush_tlb_range_asid(start, size, stride, asid);
 		}
 	} else {
 		if (broadcast) {
-			sbi_remote_sfence_vma(cmask, start, size);
-		} else if (size <= stride) {
-			local_flush_tlb_page(start);
+			if (riscv_use_ipi_for_rfence()) {
+				ftd.asid = 0;
+				ftd.start = start;
+				ftd.size = size;
+				ftd.stride = stride;
+				on_each_cpu_mask(cmask,
+						 __ipi_flush_tlb_range,
+						 &ftd, 1);
+			} else
+				sbi_remote_sfence_vma(cmask, start, size);
 		} else {
-			local_flush_tlb_all();
+			local_flush_tlb_range(start, size, stride);
 		}
 	}
 
@@ -66,23 +129,23 @@ static void __sbi_tlb_flush_range(struct mm_struct *mm, unsigned long start,
 
 void flush_tlb_mm(struct mm_struct *mm)
 {
-	__sbi_tlb_flush_range(mm, 0, -1, PAGE_SIZE);
+	__flush_tlb_range(mm, 0, -1, PAGE_SIZE);
 }
 
 void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
 {
-	__sbi_tlb_flush_range(vma->vm_mm, addr, PAGE_SIZE, PAGE_SIZE);
+	__flush_tlb_range(vma->vm_mm, addr, PAGE_SIZE, PAGE_SIZE);
 }
 
 void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 		     unsigned long end)
 {
-	__sbi_tlb_flush_range(vma->vm_mm, start, end - start, PAGE_SIZE);
+	__flush_tlb_range(vma->vm_mm, start, end - start, PAGE_SIZE);
 }
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 void flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start,
 			unsigned long end)
 {
-	__sbi_tlb_flush_range(vma->vm_mm, start, end - start, PMD_SIZE);
+	__flush_tlb_range(vma->vm_mm, start, end - start, PMD_SIZE);
 }
 #endif
-- 
2.25.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH v6 7/7] RISC-V: Use IPIs for remote icache flush when possible
  2022-04-18 10:52 ` Anup Patel
@ 2022-04-18 10:53   ` Anup Patel
  -1 siblings, 0 replies; 22+ messages in thread
From: Anup Patel @ 2022-04-18 10:53 UTC (permalink / raw)
  To: Palmer Dabbelt, Paul Walmsley, Thomas Gleixner, Marc Zyngier,
	Daniel Lezcano
  Cc: Atish Patra, Alistair Francis, Anup Patel, linux-riscv,
	linux-kernel, Anup Patel

If we have specialized interrupt controller (such as AIA IMSIC) which
allows supervisor mode to directly inject IPIs without any assistance
from M-mode or HS-mode then using such specialized interrupt controller,
we can do remote icache flushe directly from supervisor mode instead of
using the SBI RFENCE calls.

This patch extends remote icache flush functions to use supervisor mode
IPIs whenever direct supervisor mode IPIs.are supported by interrupt
controller.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 arch/riscv/mm/cacheflush.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/riscv/mm/cacheflush.c b/arch/riscv/mm/cacheflush.c
index 6cb7d96ad9c7..7c7e44aaf791 100644
--- a/arch/riscv/mm/cacheflush.c
+++ b/arch/riscv/mm/cacheflush.c
@@ -18,7 +18,7 @@ void flush_icache_all(void)
 {
 	local_flush_icache_all();
 
-	if (IS_ENABLED(CONFIG_RISCV_SBI))
+	if (IS_ENABLED(CONFIG_RISCV_SBI) && !riscv_use_ipi_for_rfence())
 		sbi_remote_fence_i(NULL);
 	else
 		on_each_cpu(ipi_remote_fence_i, NULL, 1);
@@ -66,7 +66,8 @@ void flush_icache_mm(struct mm_struct *mm, bool local)
 		 * with flush_icache_deferred().
 		 */
 		smp_mb();
-	} else if (IS_ENABLED(CONFIG_RISCV_SBI)) {
+	} else if (IS_ENABLED(CONFIG_RISCV_SBI) &&
+		   !riscv_use_ipi_for_rfence()) {
 		sbi_remote_fence_i(&others);
 	} else {
 		on_each_cpu_mask(&others, ipi_remote_fence_i, NULL, 1);
-- 
2.25.1


^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH v6 7/7] RISC-V: Use IPIs for remote icache flush when possible
@ 2022-04-18 10:53   ` Anup Patel
  0 siblings, 0 replies; 22+ messages in thread
From: Anup Patel @ 2022-04-18 10:53 UTC (permalink / raw)
  To: Palmer Dabbelt, Paul Walmsley, Thomas Gleixner, Marc Zyngier,
	Daniel Lezcano
  Cc: Atish Patra, Alistair Francis, Anup Patel, linux-riscv,
	linux-kernel, Anup Patel

If we have specialized interrupt controller (such as AIA IMSIC) which
allows supervisor mode to directly inject IPIs without any assistance
from M-mode or HS-mode then using such specialized interrupt controller,
we can do remote icache flushe directly from supervisor mode instead of
using the SBI RFENCE calls.

This patch extends remote icache flush functions to use supervisor mode
IPIs whenever direct supervisor mode IPIs.are supported by interrupt
controller.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 arch/riscv/mm/cacheflush.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/riscv/mm/cacheflush.c b/arch/riscv/mm/cacheflush.c
index 6cb7d96ad9c7..7c7e44aaf791 100644
--- a/arch/riscv/mm/cacheflush.c
+++ b/arch/riscv/mm/cacheflush.c
@@ -18,7 +18,7 @@ void flush_icache_all(void)
 {
 	local_flush_icache_all();
 
-	if (IS_ENABLED(CONFIG_RISCV_SBI))
+	if (IS_ENABLED(CONFIG_RISCV_SBI) && !riscv_use_ipi_for_rfence())
 		sbi_remote_fence_i(NULL);
 	else
 		on_each_cpu(ipi_remote_fence_i, NULL, 1);
@@ -66,7 +66,8 @@ void flush_icache_mm(struct mm_struct *mm, bool local)
 		 * with flush_icache_deferred().
 		 */
 		smp_mb();
-	} else if (IS_ENABLED(CONFIG_RISCV_SBI)) {
+	} else if (IS_ENABLED(CONFIG_RISCV_SBI) &&
+		   !riscv_use_ipi_for_rfence()) {
 		sbi_remote_fence_i(&others);
 	} else {
 		on_each_cpu_mask(&others, ipi_remote_fence_i, NULL, 1);
-- 
2.25.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply related	[flat|nested] 22+ messages in thread
* Re: [PATCH v6 0/7] RISC-V IPI Improvements
  2022-04-18 10:52 ` Anup Patel
@ 2022-07-05  6:01   ` Anup Patel
  -1 siblings, 0 replies; 22+ messages in thread
From: Anup Patel @ 2022-07-05  6:01 UTC (permalink / raw)
  To: Thomas Gleixner, Marc Zyngier
  Cc: Atish Patra, Alistair Francis, Anup Patel, linux-riscv,
	linux-kernel@vger.kernel.org List, Palmer Dabbelt, Paul Walmsley,
	Daniel Lezcano

Hi Marc and Thomas,

Just a friendly ping ...

On Mon, Apr 18, 2022 at 4:23 PM Anup Patel <apatel@ventanamicro.com> wrote:
>
> This series aims to improve IPI support in Linux RISC-V in following ways:
>  1) Treat IPIs as normal per-CPU interrupts instead of having custom RISC-V
>     specific hooks. This also makes Linux RISC-V IPI support aligned with
>     other architectures.
>  2) Remote TLB flushes and icache flushes should prefer local IPIs instead
>     of SBI calls whenever we have specialized hardware (such as RISC-V AIA
>     IMSIC and RISC-V SWI) which allows S-mode software to directly inject
>     IPIs without any assistance from M-mode runtime firmware.
>
> These patches were originally part of the "Linux RISC-V ACLINT Support"
> series but this now a separate series so that it can be merged independently
> of the "Linux RISC-V ACLINT Support" series.
> (Refer, https://lore.kernel.org/lkml/20211007123632.697666-1-anup.patel@wdc.com/)
>
> These patches are also a preparatory patches for the up-coming:
>  1) Linux RISC-V AIA support
>  2) KVM RISC-V TLB flush improvements
>  3) Linux RISC-V SWI support
>
> These patches can also be found in riscv_ipi_imp_v6 branch at:
> https://github.com/avpatel/linux.git
>
> Changes since v5:
>  - Rebased on Linux-5.18-rc3
>  - Used kernel doc style in PATCH3
>  - Removed redundant loop in ipi_mux_process() of PATCH3
>  - Removed "RISC-V" prefix form ipi_mux_chip.name of PATCH3
>  - Removed use of "this patch" in PATCH3 commit description
>  - Addressed few other nit comments in PATCH3
>
> Changes since v4:
>  - Rebased on Linux-5.17
>  - Includes new PATCH3 which adds mechanism to multiplex a single HW IPI
>
> Changes since v3:
>  - Rebased on Linux-5.17-rc6
>  - Updated PATCH2 to not export riscv_set_intc_hwnode_fn()
>  - Simplified riscv_intc_hwnode() in PATCH2
>
> Changes since v2:
>  - Rebased on Linux-5.17-rc4
>  - Updated PATCH2 to not create synthetic INTC fwnode and instead provide
>    a function which allows drivers to directly discover INTC fwnode
>
> Changes since v1:
>  - Use synthetic fwnode for INTC instead of irq_set_default_host() in PATCH2
>
> Anup Patel (7):
>   RISC-V: Clear SIP bit only when using SBI IPI operations
>   irqchip/riscv-intc: Allow drivers to directly discover INTC hwnode
>   genirq: Add mechanism to multiplex a single HW IPI
>   RISC-V: Treat IPIs as normal Linux IRQs
>   RISC-V: Allow marking IPIs as suitable for remote FENCEs
>   RISC-V: Use IPIs for remote TLB flush when possible
>   RISC-V: Use IPIs for remote icache flush when possible

Any further comments on this series ?

Regards,
Anup

>
>  arch/riscv/Kconfig                |   2 +
>  arch/riscv/include/asm/irq.h      |   4 +
>  arch/riscv/include/asm/sbi.h      |   2 +
>  arch/riscv/include/asm/smp.h      |  49 +++++---
>  arch/riscv/kernel/Makefile        |   1 +
>  arch/riscv/kernel/cpu-hotplug.c   |   3 +-
>  arch/riscv/kernel/irq.c           |  21 +++-
>  arch/riscv/kernel/sbi-ipi.c       |  60 +++++++++
>  arch/riscv/kernel/sbi.c           |  11 --
>  arch/riscv/kernel/smp.c           | 164 +++++++++++++------------
>  arch/riscv/kernel/smpboot.c       |   5 +-
>  arch/riscv/mm/cacheflush.c        |   5 +-
>  arch/riscv/mm/tlbflush.c          |  93 +++++++++++---
>  drivers/clocksource/timer-clint.c |  41 +++++--
>  drivers/irqchip/irq-riscv-intc.c  |  60 ++++-----
>  include/linux/irq.h               |  11 ++
>  kernel/irq/Kconfig                |   4 +
>  kernel/irq/Makefile               |   1 +
>  kernel/irq/ipi-mux.c              | 197 ++++++++++++++++++++++++++++++
>  19 files changed, 567 insertions(+), 167 deletions(-)
>  create mode 100644 arch/riscv/kernel/sbi-ipi.c
>  create mode 100644 kernel/irq/ipi-mux.c
>
> --
> 2.25.1
>

^ permalink raw reply	[flat|nested] 22+ messages in thread
* Re: [PATCH v6 0/7] RISC-V IPI Improvements
@ 2022-07-05  6:01   ` Anup Patel
  0 siblings, 0 replies; 22+ messages in thread
From: Anup Patel @ 2022-07-05  6:01 UTC (permalink / raw)
  To: Thomas Gleixner, Marc Zyngier
  Cc: Atish Patra, Alistair Francis, Anup Patel, linux-riscv,
	linux-kernel@vger.kernel.org List, Palmer Dabbelt, Paul Walmsley,
	Daniel Lezcano

Hi Marc and Thomas,

Just a friendly ping ...

On Mon, Apr 18, 2022 at 4:23 PM Anup Patel <apatel@ventanamicro.com> wrote:
>
> This series aims to improve IPI support in Linux RISC-V in following ways:
>  1) Treat IPIs as normal per-CPU interrupts instead of having custom RISC-V
>     specific hooks. This also makes Linux RISC-V IPI support aligned with
>     other architectures.
>  2) Remote TLB flushes and icache flushes should prefer local IPIs instead
>     of SBI calls whenever we have specialized hardware (such as RISC-V AIA
>     IMSIC and RISC-V SWI) which allows S-mode software to directly inject
>     IPIs without any assistance from M-mode runtime firmware.
>
> These patches were originally part of the "Linux RISC-V ACLINT Support"
> series but this now a separate series so that it can be merged independently
> of the "Linux RISC-V ACLINT Support" series.
> (Refer, https://lore.kernel.org/lkml/20211007123632.697666-1-anup.patel@wdc.com/)
>
> These patches are also a preparatory patches for the up-coming:
>  1) Linux RISC-V AIA support
>  2) KVM RISC-V TLB flush improvements
>  3) Linux RISC-V SWI support
>
> These patches can also be found in riscv_ipi_imp_v6 branch at:
> https://github.com/avpatel/linux.git
>
> Changes since v5:
>  - Rebased on Linux-5.18-rc3
>  - Used kernel doc style in PATCH3
>  - Removed redundant loop in ipi_mux_process() of PATCH3
>  - Removed "RISC-V" prefix form ipi_mux_chip.name of PATCH3
>  - Removed use of "this patch" in PATCH3 commit description
>  - Addressed few other nit comments in PATCH3
>
> Changes since v4:
>  - Rebased on Linux-5.17
>  - Includes new PATCH3 which adds mechanism to multiplex a single HW IPI
>
> Changes since v3:
>  - Rebased on Linux-5.17-rc6
>  - Updated PATCH2 to not export riscv_set_intc_hwnode_fn()
>  - Simplified riscv_intc_hwnode() in PATCH2
>
> Changes since v2:
>  - Rebased on Linux-5.17-rc4
>  - Updated PATCH2 to not create synthetic INTC fwnode and instead provide
>    a function which allows drivers to directly discover INTC fwnode
>
> Changes since v1:
>  - Use synthetic fwnode for INTC instead of irq_set_default_host() in PATCH2
>
> Anup Patel (7):
>   RISC-V: Clear SIP bit only when using SBI IPI operations
>   irqchip/riscv-intc: Allow drivers to directly discover INTC hwnode
>   genirq: Add mechanism to multiplex a single HW IPI
>   RISC-V: Treat IPIs as normal Linux IRQs
>   RISC-V: Allow marking IPIs as suitable for remote FENCEs
>   RISC-V: Use IPIs for remote TLB flush when possible
>   RISC-V: Use IPIs for remote icache flush when possible

Any further comments on this series ?

Regards,
Anup

>
>  arch/riscv/Kconfig                |   2 +
>  arch/riscv/include/asm/irq.h      |   4 +
>  arch/riscv/include/asm/sbi.h      |   2 +
>  arch/riscv/include/asm/smp.h      |  49 +++++---
>  arch/riscv/kernel/Makefile        |   1 +
>  arch/riscv/kernel/cpu-hotplug.c   |   3 +-
>  arch/riscv/kernel/irq.c           |  21 +++-
>  arch/riscv/kernel/sbi-ipi.c       |  60 +++++++++
>  arch/riscv/kernel/sbi.c           |  11 --
>  arch/riscv/kernel/smp.c           | 164 +++++++++++++------------
>  arch/riscv/kernel/smpboot.c       |   5 +-
>  arch/riscv/mm/cacheflush.c        |   5 +-
>  arch/riscv/mm/tlbflush.c          |  93 +++++++++++---
>  drivers/clocksource/timer-clint.c |  41 +++++--
>  drivers/irqchip/irq-riscv-intc.c  |  60 ++++-----
>  include/linux/irq.h               |  11 ++
>  kernel/irq/Kconfig                |   4 +
>  kernel/irq/Makefile               |   1 +
>  kernel/irq/ipi-mux.c              | 197 ++++++++++++++++++++++++++++++
>  19 files changed, 567 insertions(+), 167 deletions(-)
>  create mode 100644 arch/riscv/kernel/sbi-ipi.c
>  create mode 100644 kernel/irq/ipi-mux.c
>
> --
> 2.25.1
>

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 22+ messages in thread
* Re: [PATCH v6 3/7] genirq: Add mechanism to multiplex a single HW IPI
  2022-04-18 10:53   ` Anup Patel
@ 2022-07-19 16:20     ` Marc Zyngier
  -1 siblings, 0 replies; 22+ messages in thread
From: Marc Zyngier @ 2022-07-19 16:20 UTC (permalink / raw)
  To: Anup Patel
  Cc: Palmer Dabbelt, Paul Walmsley, Thomas Gleixner, Daniel Lezcano,
	Atish Patra, Alistair Francis, Anup Patel, linux-riscv,
	linux-kernel

On Mon, 18 Apr 2022 11:53:01 +0100,
Anup Patel <apatel@ventanamicro.com> wrote:
> 
> All RISC-V platforms have a single HW IPI provided by the INTC local
> interrupt controller. The HW method to trigger INTC IPI can be through
> external irqchip (e.g. RISC-V AIA), through platform specific device
> (e.g. SiFive CLINT timer), or through firmware (e.g. SBI IPI call).
> 
> To support multiple IPIs on RISC-V, we add a generic IPI multiplexing
> mechanism which help us create multiple virtual IPIs using a single
> HW IPI. This generic IPI multiplexing is shared among various RISC-V
> irqchip drivers.
> 
> Signed-off-by: Anup Patel <apatel@ventanamicro.com>
> ---
>  include/linux/irq.h  |  11 +++
>  kernel/irq/Kconfig   |   4 +
>  kernel/irq/Makefile  |   1 +
>  kernel/irq/ipi-mux.c | 197 +++++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 213 insertions(+)
>  create mode 100644 kernel/irq/ipi-mux.c
> 
> diff --git a/include/linux/irq.h b/include/linux/irq.h
> index f92788ccdba2..5bb4e2db63d7 100644
> --- a/include/linux/irq.h
> +++ b/include/linux/irq.h
> @@ -1247,6 +1247,17 @@ int __ipi_send_mask(struct irq_desc *desc, const struct cpumask *dest);
>  int ipi_send_single(unsigned int virq, unsigned int cpu);
>  int ipi_send_mask(unsigned int virq, const struct cpumask *dest);
>  
> +#define IPI_MUX_NR_IRQS		BITS_PER_LONG
> +
> +struct ipi_mux_ops {
> +	void (*ipi_mux_clear)(unsigned int parent_virq);
> +	void (*ipi_mux_send)(unsigned int parent_virq,
> +			     const struct cpumask *mask);

You really cannot just dump this like this. This requires
documentation so that architecture maintainers can move over to this.
I appreciate that this area is pretty poorly documented, but we need
to start somewhere.

> +};
> +
> +void ipi_mux_process(void);
> +int ipi_mux_create(unsigned int parent_virq, const struct ipi_mux_ops *ops);
> +
>  #ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
>  /*
>   * Registers a generic IRQ handling function as the top-level IRQ handler in
> diff --git a/kernel/irq/Kconfig b/kernel/irq/Kconfig
> index 10929eda9825..2388e7d40ed3 100644
> --- a/kernel/irq/Kconfig
> +++ b/kernel/irq/Kconfig
> @@ -84,6 +84,10 @@ config GENERIC_IRQ_IPI
>  	bool
>  	select IRQ_DOMAIN_HIERARCHY
>  
> +# Generic IRQ IPI Mux support
> +config GENERIC_IRQ_IPI_MUX
> +	bool
> +
>  # Generic MSI interrupt support
>  config GENERIC_MSI_IRQ
>  	bool
> diff --git a/kernel/irq/Makefile b/kernel/irq/Makefile
> index b4f53717d143..f19d3080bf11 100644
> --- a/kernel/irq/Makefile
> +++ b/kernel/irq/Makefile
> @@ -15,6 +15,7 @@ obj-$(CONFIG_GENERIC_IRQ_MIGRATION) += cpuhotplug.o
>  obj-$(CONFIG_PM_SLEEP) += pm.o
>  obj-$(CONFIG_GENERIC_MSI_IRQ) += msi.o
>  obj-$(CONFIG_GENERIC_IRQ_IPI) += ipi.o
> +obj-$(CONFIG_GENERIC_IRQ_IPI_MUX) += ipi-mux.o
>  obj-$(CONFIG_SMP) += affinity.o
>  obj-$(CONFIG_GENERIC_IRQ_DEBUGFS) += debugfs.o
>  obj-$(CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR) += matrix.o
> diff --git a/kernel/irq/ipi-mux.c b/kernel/irq/ipi-mux.c
> new file mode 100644
> index 000000000000..1a1fcfe3ac54
> --- /dev/null
> +++ b/kernel/irq/ipi-mux.c
> @@ -0,0 +1,197 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Multiplex several virtual IPIs over a single HW IPI.
> + *
> + * Copyright (c) 2022 Ventana Micro Systems Inc.
> + */
> +
> +#define pr_fmt(fmt) "ipi-mux: " fmt
> +#include <linux/cpu.h>
> +#include <linux/init.h>
> +#include <linux/irq.h>
> +#include <linux/irqchip.h>
> +#include <linux/irqchip/chained_irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/smp.h>
> +
> +static unsigned int ipi_mux_parent_virq;
> +static struct irq_domain *ipi_mux_domain;
> +static const struct  ipi_mux_ops *ipi_mux_ops;
> +static DEFINE_PER_CPU(unsigned long, ipi_mux_bits);
> +
> +static void ipi_mux_dummy(struct irq_data *d)
> +{
> +}
> +
> +static void ipi_mux_send_mask(struct irq_data *d, const struct cpumask *mask)
> +{
> +	int cpu;
> +
> +	/* Barrier before doing atomic bit update to IPI bits */
> +	smp_mb__before_atomic();
> +
> +	for_each_cpu(cpu, mask)
> +		set_bit(d->hwirq, per_cpu_ptr(&ipi_mux_bits, cpu));
> +
> +	/* Barrier after doing atomic bit update to IPI bits */
> +	smp_mb__after_atomic();
> +
> +	/* Trigger the parent IPI */
> +	ipi_mux_ops->ipi_mux_send(ipi_mux_parent_virq, mask);
> +}
> +
> +static struct irq_chip ipi_mux_chip = {

const, please.

> +	.name		= "IPI Mux",
> +	.irq_mask	= ipi_mux_dummy,
> +	.irq_unmask	= ipi_mux_dummy,

Maybe we should consider a flow that does not require this dummy
callbacks.

> +	.ipi_send_mask	= ipi_mux_send_mask,
> +};
> +
> +static int ipi_mux_domain_map(struct irq_domain *d, unsigned int irq,
> +			      irq_hw_number_t hwirq)
> +{
> +	irq_set_percpu_devid(irq);
> +	irq_domain_set_info(d, irq, hwirq, &ipi_mux_chip, d->host_data,
> +			    handle_percpu_devid_irq, NULL, NULL);
> +
> +	return 0;
> +}
> +
> +static int ipi_mux_domain_alloc(struct irq_domain *d, unsigned int virq,
> +				unsigned int nr_irqs, void *arg)
> +{
> +	unsigned int type = IRQ_TYPE_NONE;

Really, this should be EDGE.

> +	struct irq_fwspec *fwspec = arg;
> +	irq_hw_number_t hwirq;
> +	int i, ret;
> +
> +	ret = irq_domain_translate_onecell(d, fwspec, &hwirq, &type);
> +	if (ret)
> +		return ret;
> +
> +	for (i = 0; i < nr_irqs; i++) {
> +		ret = ipi_mux_domain_map(d, virq + i, hwirq + i);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct irq_domain_ops ipi_mux_domain_ops = {
> +	.translate	= irq_domain_translate_onecell,

What is the purpose of this callback? Firmware shouldn't be involved
in IPIs at all, and since you only have one cell, you can use the
default path. This is also a dependency on CONFIG_IRQ_DOMAIN_HIERARCHY.

> +	.alloc		= ipi_mux_domain_alloc,
> +	.free		= irq_domain_free_irqs_top,
> +};
> +
> +/**
> + * ipi_mux_process - Process multiplexed virtual IPIs
> + */
> +void ipi_mux_process(void)
> +{
> +	unsigned long irqs, *bits = this_cpu_ptr(&ipi_mux_bits);
> +	irq_hw_number_t hwirq;
> +	int err;
> +
> +	/* Clear the parent IPI */
> +	if (ipi_mux_ops->ipi_mux_clear)
> +		ipi_mux_ops->ipi_mux_clear(ipi_mux_parent_virq);
> +
> +	/*
> +	 * Barrier for IPI bits paired with smp_mb__xyz_atomic()

xyz???

> +	 * in ipi_mux_send_mask()
> +	 */
> +	smp_mb();
> +
> +	irqs = xchg(bits, 0);
> +	if (!irqs)
> +		return;
> +
> +	for_each_set_bit(hwirq, &irqs, IPI_MUX_NR_IRQS) {
> +		err = generic_handle_domain_irq(ipi_mux_domain,
> +						hwirq);
> +		if (unlikely(err))
> +			pr_warn_ratelimited(
> +				"can't find mapping for hwirq %lu\n",
> +				hwirq);
> +	}
> +}
> +
> +static void ipi_mux_handler(struct irq_desc *desc)
> +{
> +	struct irq_chip *chip = irq_desc_get_chip(desc);
> +
> +	chained_irq_enter(chip, desc);
> +	ipi_mux_process();
> +	chained_irq_exit(chip, desc);
> +}
> +
> +static int ipi_mux_dying_cpu(unsigned int cpu)
> +{
> +	disable_percpu_irq(ipi_mux_parent_virq);
> +	return 0;
> +}
> +
> +static int ipi_mux_starting_cpu(unsigned int cpu)
> +{
> +	enable_percpu_irq(ipi_mux_parent_virq,
> +			  irq_get_trigger_type(ipi_mux_parent_virq));
> +	return 0;
> +}
> +
> +/**
> + * ipi_mux_create - Create virtual IPIs (total IPI_MUX_NR_IRQS) multiplexed
> + * on top of a single parent IPI.
> + * @parent_virq:	virq of the parent IPI
> + * @ops:		multiplexing operations for the parent IPI
> + *
> + * If the parent IPI > 0 then ipi_mux_process() will be automatically
> + * called via chained handler.
> + *
> + * If the parent IPI <= 0 then it is responsiblity of irqchip drivers
> + * to explicitly call ipi_mux_process() for processing muxed IPIs.
> + *
> + * Returns first virq of the newly created virutal IPIs upon success
> + * or <=0 upon failure
> + */
> +int ipi_mux_create(unsigned int parent_virq, const struct ipi_mux_ops *ops)
> +{

Why should be parent_virq be unique? I also see nothing that checks
that this is a per-CPU interrupt. If anything, this needs documenting.

> +	struct irq_domain *domain;
> +	struct irq_fwspec ipi;
> +	int virq;
> +
> +	if (ipi_mux_domain || !ops || !ops->ipi_mux_send)
> +		return 0;
> +
> +	domain = irq_domain_add_linear(NULL, IPI_MUX_NR_IRQS,

Urgh. For a start, please use the irq_domain_create_* version, as this
shouldn't be DT specific. Then, don't use a NULL fwnode, as this
results in a "default domain", which nobody sane should ever use
anymore. Also, defaulting to BITS_PER_LONG is a lot of interrupts for
not much (most archs use only a handful). You may want to consider
this being a parameter, and cap it at BITS_PER_LONG.

> +				       &ipi_mux_domain_ops, NULL);
> +	if (!domain) {
> +		pr_err("unable to add IPI Mux domain\n");
> +		return 0;
> +	}
> +
> +	ipi.fwnode = domain->fwnode;

Which is NULL (see above).

> +	ipi.param_count = 1;
> +	ipi.param[0] = 0;
> +	virq = __irq_domain_alloc_irqs(domain, -1, IPI_MUX_NR_IRQS,
> +				       NUMA_NO_NODE, &ipi, false, NULL);
> +	if (virq <= 0) {
> +		pr_err("unable to alloc IRQs from IPI Mux domain\n");
> +		irq_domain_remove(domain);
> +		return virq;
> +	}
> +
> +	ipi_mux_domain = domain;
> +	ipi_mux_parent_virq = parent_virq;
> +	ipi_mux_ops = ops;
> +
> +	if (parent_virq > 0) {
> +		irq_set_chained_handler(parent_virq, ipi_mux_handler);
> +
> +		cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
> +				  "irqchip/ipi-mux:starting",
> +				  ipi_mux_starting_cpu, ipi_mux_dying_cpu);
> +	}
> +
> +	return virq;
> +}

Thanks,

	M.

-- 
Without deviation from the norm, progress is not possible.

^ permalink raw reply	[flat|nested] 22+ messages in thread
* Re: [PATCH v6 3/7] genirq: Add mechanism to multiplex a single HW IPI
@ 2022-07-19 16:20     ` Marc Zyngier
  0 siblings, 0 replies; 22+ messages in thread
From: Marc Zyngier @ 2022-07-19 16:20 UTC (permalink / raw)
  To: Anup Patel
  Cc: Palmer Dabbelt, Paul Walmsley, Thomas Gleixner, Daniel Lezcano,
	Atish Patra, Alistair Francis, Anup Patel, linux-riscv,
	linux-kernel

On Mon, 18 Apr 2022 11:53:01 +0100,
Anup Patel <apatel@ventanamicro.com> wrote:
> 
> All RISC-V platforms have a single HW IPI provided by the INTC local
> interrupt controller. The HW method to trigger INTC IPI can be through
> external irqchip (e.g. RISC-V AIA), through platform specific device
> (e.g. SiFive CLINT timer), or through firmware (e.g. SBI IPI call).
> 
> To support multiple IPIs on RISC-V, we add a generic IPI multiplexing
> mechanism which help us create multiple virtual IPIs using a single
> HW IPI. This generic IPI multiplexing is shared among various RISC-V
> irqchip drivers.
> 
> Signed-off-by: Anup Patel <apatel@ventanamicro.com>
> ---
>  include/linux/irq.h  |  11 +++
>  kernel/irq/Kconfig   |   4 +
>  kernel/irq/Makefile  |   1 +
>  kernel/irq/ipi-mux.c | 197 +++++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 213 insertions(+)
>  create mode 100644 kernel/irq/ipi-mux.c
> 
> diff --git a/include/linux/irq.h b/include/linux/irq.h
> index f92788ccdba2..5bb4e2db63d7 100644
> --- a/include/linux/irq.h
> +++ b/include/linux/irq.h
> @@ -1247,6 +1247,17 @@ int __ipi_send_mask(struct irq_desc *desc, const struct cpumask *dest);
>  int ipi_send_single(unsigned int virq, unsigned int cpu);
>  int ipi_send_mask(unsigned int virq, const struct cpumask *dest);
>  
> +#define IPI_MUX_NR_IRQS		BITS_PER_LONG
> +
> +struct ipi_mux_ops {
> +	void (*ipi_mux_clear)(unsigned int parent_virq);
> +	void (*ipi_mux_send)(unsigned int parent_virq,
> +			     const struct cpumask *mask);

You really cannot just dump this like this. This requires
documentation so that architecture maintainers can move over to this.
I appreciate that this area is pretty poorly documented, but we need
to start somewhere.

> +};
> +
> +void ipi_mux_process(void);
> +int ipi_mux_create(unsigned int parent_virq, const struct ipi_mux_ops *ops);
> +
>  #ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
>  /*
>   * Registers a generic IRQ handling function as the top-level IRQ handler in
> diff --git a/kernel/irq/Kconfig b/kernel/irq/Kconfig
> index 10929eda9825..2388e7d40ed3 100644
> --- a/kernel/irq/Kconfig
> +++ b/kernel/irq/Kconfig
> @@ -84,6 +84,10 @@ config GENERIC_IRQ_IPI
>  	bool
>  	select IRQ_DOMAIN_HIERARCHY
>  
> +# Generic IRQ IPI Mux support
> +config GENERIC_IRQ_IPI_MUX
> +	bool
> +
>  # Generic MSI interrupt support
>  config GENERIC_MSI_IRQ
>  	bool
> diff --git a/kernel/irq/Makefile b/kernel/irq/Makefile
> index b4f53717d143..f19d3080bf11 100644
> --- a/kernel/irq/Makefile
> +++ b/kernel/irq/Makefile
> @@ -15,6 +15,7 @@ obj-$(CONFIG_GENERIC_IRQ_MIGRATION) += cpuhotplug.o
>  obj-$(CONFIG_PM_SLEEP) += pm.o
>  obj-$(CONFIG_GENERIC_MSI_IRQ) += msi.o
>  obj-$(CONFIG_GENERIC_IRQ_IPI) += ipi.o
> +obj-$(CONFIG_GENERIC_IRQ_IPI_MUX) += ipi-mux.o
>  obj-$(CONFIG_SMP) += affinity.o
>  obj-$(CONFIG_GENERIC_IRQ_DEBUGFS) += debugfs.o
>  obj-$(CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR) += matrix.o
> diff --git a/kernel/irq/ipi-mux.c b/kernel/irq/ipi-mux.c
> new file mode 100644
> index 000000000000..1a1fcfe3ac54
> --- /dev/null
> +++ b/kernel/irq/ipi-mux.c
> @@ -0,0 +1,197 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Multiplex several virtual IPIs over a single HW IPI.
> + *
> + * Copyright (c) 2022 Ventana Micro Systems Inc.
> + */
> +
> +#define pr_fmt(fmt) "ipi-mux: " fmt
> +#include <linux/cpu.h>
> +#include <linux/init.h>
> +#include <linux/irq.h>
> +#include <linux/irqchip.h>
> +#include <linux/irqchip/chained_irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/smp.h>
> +
> +static unsigned int ipi_mux_parent_virq;
> +static struct irq_domain *ipi_mux_domain;
> +static const struct  ipi_mux_ops *ipi_mux_ops;
> +static DEFINE_PER_CPU(unsigned long, ipi_mux_bits);
> +
> +static void ipi_mux_dummy(struct irq_data *d)
> +{
> +}
> +
> +static void ipi_mux_send_mask(struct irq_data *d, const struct cpumask *mask)
> +{
> +	int cpu;
> +
> +	/* Barrier before doing atomic bit update to IPI bits */
> +	smp_mb__before_atomic();
> +
> +	for_each_cpu(cpu, mask)
> +		set_bit(d->hwirq, per_cpu_ptr(&ipi_mux_bits, cpu));
> +
> +	/* Barrier after doing atomic bit update to IPI bits */
> +	smp_mb__after_atomic();
> +
> +	/* Trigger the parent IPI */
> +	ipi_mux_ops->ipi_mux_send(ipi_mux_parent_virq, mask);
> +}
> +
> +static struct irq_chip ipi_mux_chip = {

const, please.

> +	.name		= "IPI Mux",
> +	.irq_mask	= ipi_mux_dummy,
> +	.irq_unmask	= ipi_mux_dummy,

Maybe we should consider a flow that does not require this dummy
callbacks.

> +	.ipi_send_mask	= ipi_mux_send_mask,
> +};
> +
> +static int ipi_mux_domain_map(struct irq_domain *d, unsigned int irq,
> +			      irq_hw_number_t hwirq)
> +{
> +	irq_set_percpu_devid(irq);
> +	irq_domain_set_info(d, irq, hwirq, &ipi_mux_chip, d->host_data,
> +			    handle_percpu_devid_irq, NULL, NULL);
> +
> +	return 0;
> +}
> +
> +static int ipi_mux_domain_alloc(struct irq_domain *d, unsigned int virq,
> +				unsigned int nr_irqs, void *arg)
> +{
> +	unsigned int type = IRQ_TYPE_NONE;

Really, this should be EDGE.

> +	struct irq_fwspec *fwspec = arg;
> +	irq_hw_number_t hwirq;
> +	int i, ret;
> +
> +	ret = irq_domain_translate_onecell(d, fwspec, &hwirq, &type);
> +	if (ret)
> +		return ret;
> +
> +	for (i = 0; i < nr_irqs; i++) {
> +		ret = ipi_mux_domain_map(d, virq + i, hwirq + i);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct irq_domain_ops ipi_mux_domain_ops = {
> +	.translate	= irq_domain_translate_onecell,

What is the purpose of this callback? Firmware shouldn't be involved
in IPIs at all, and since you only have one cell, you can use the
default path. This is also a dependency on CONFIG_IRQ_DOMAIN_HIERARCHY.

> +	.alloc		= ipi_mux_domain_alloc,
> +	.free		= irq_domain_free_irqs_top,
> +};
> +
> +/**
> + * ipi_mux_process - Process multiplexed virtual IPIs
> + */
> +void ipi_mux_process(void)
> +{
> +	unsigned long irqs, *bits = this_cpu_ptr(&ipi_mux_bits);
> +	irq_hw_number_t hwirq;
> +	int err;
> +
> +	/* Clear the parent IPI */
> +	if (ipi_mux_ops->ipi_mux_clear)
> +		ipi_mux_ops->ipi_mux_clear(ipi_mux_parent_virq);
> +
> +	/*
> +	 * Barrier for IPI bits paired with smp_mb__xyz_atomic()

xyz???

> +	 * in ipi_mux_send_mask()
> +	 */
> +	smp_mb();
> +
> +	irqs = xchg(bits, 0);
> +	if (!irqs)
> +		return;
> +
> +	for_each_set_bit(hwirq, &irqs, IPI_MUX_NR_IRQS) {
> +		err = generic_handle_domain_irq(ipi_mux_domain,
> +						hwirq);
> +		if (unlikely(err))
> +			pr_warn_ratelimited(
> +				"can't find mapping for hwirq %lu\n",
> +				hwirq);
> +	}
> +}
> +
> +static void ipi_mux_handler(struct irq_desc *desc)
> +{
> +	struct irq_chip *chip = irq_desc_get_chip(desc);
> +
> +	chained_irq_enter(chip, desc);
> +	ipi_mux_process();
> +	chained_irq_exit(chip, desc);
> +}
> +
> +static int ipi_mux_dying_cpu(unsigned int cpu)
> +{
> +	disable_percpu_irq(ipi_mux_parent_virq);
> +	return 0;
> +}
> +
> +static int ipi_mux_starting_cpu(unsigned int cpu)
> +{
> +	enable_percpu_irq(ipi_mux_parent_virq,
> +			  irq_get_trigger_type(ipi_mux_parent_virq));
> +	return 0;
> +}
> +
> +/**
> + * ipi_mux_create - Create virtual IPIs (total IPI_MUX_NR_IRQS) multiplexed
> + * on top of a single parent IPI.
> + * @parent_virq:	virq of the parent IPI
> + * @ops:		multiplexing operations for the parent IPI
> + *
> + * If the parent IPI > 0 then ipi_mux_process() will be automatically
> + * called via chained handler.
> + *
> + * If the parent IPI <= 0 then it is responsiblity of irqchip drivers
> + * to explicitly call ipi_mux_process() for processing muxed IPIs.
> + *
> + * Returns first virq of the newly created virutal IPIs upon success
> + * or <=0 upon failure
> + */
> +int ipi_mux_create(unsigned int parent_virq, const struct ipi_mux_ops *ops)
> +{

Why should be parent_virq be unique? I also see nothing that checks
that this is a per-CPU interrupt. If anything, this needs documenting.

> +	struct irq_domain *domain;
> +	struct irq_fwspec ipi;
> +	int virq;
> +
> +	if (ipi_mux_domain || !ops || !ops->ipi_mux_send)
> +		return 0;
> +
> +	domain = irq_domain_add_linear(NULL, IPI_MUX_NR_IRQS,

Urgh. For a start, please use the irq_domain_create_* version, as this
shouldn't be DT specific. Then, don't use a NULL fwnode, as this
results in a "default domain", which nobody sane should ever use
anymore. Also, defaulting to BITS_PER_LONG is a lot of interrupts for
not much (most archs use only a handful). You may want to consider
this being a parameter, and cap it at BITS_PER_LONG.

> +				       &ipi_mux_domain_ops, NULL);
> +	if (!domain) {
> +		pr_err("unable to add IPI Mux domain\n");
> +		return 0;
> +	}
> +
> +	ipi.fwnode = domain->fwnode;

Which is NULL (see above).

> +	ipi.param_count = 1;
> +	ipi.param[0] = 0;
> +	virq = __irq_domain_alloc_irqs(domain, -1, IPI_MUX_NR_IRQS,
> +				       NUMA_NO_NODE, &ipi, false, NULL);
> +	if (virq <= 0) {
> +		pr_err("unable to alloc IRQs from IPI Mux domain\n");
> +		irq_domain_remove(domain);
> +		return virq;
> +	}
> +
> +	ipi_mux_domain = domain;
> +	ipi_mux_parent_virq = parent_virq;
> +	ipi_mux_ops = ops;
> +
> +	if (parent_virq > 0) {
> +		irq_set_chained_handler(parent_virq, ipi_mux_handler);
> +
> +		cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
> +				  "irqchip/ipi-mux:starting",
> +				  ipi_mux_starting_cpu, ipi_mux_dying_cpu);
> +	}
> +
> +	return virq;
> +}

Thanks,

	M.

-- 
Without deviation from the norm, progress is not possible.

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 22+ messages in thread
* Re: [PATCH v6 3/7] genirq: Add mechanism to multiplex a single HW IPI
  2022-07-19 16:20     ` Marc Zyngier
@ 2022-07-20 14:50       ` Anup Patel
  -1 siblings, 0 replies; 22+ messages in thread
From: Anup Patel @ 2022-07-20 14:50 UTC (permalink / raw)
  To: Marc Zyngier
  Cc: Palmer Dabbelt, Paul Walmsley, Thomas Gleixner, Daniel Lezcano,
	Atish Patra, Alistair Francis, Anup Patel, linux-riscv,
	linux-kernel@vger.kernel.org List

On Tue, Jul 19, 2022 at 9:50 PM Marc Zyngier <maz@kernel.org> wrote:
>
> On Mon, 18 Apr 2022 11:53:01 +0100,
> Anup Patel <apatel@ventanamicro.com> wrote:
> >
> > All RISC-V platforms have a single HW IPI provided by the INTC local
> > interrupt controller. The HW method to trigger INTC IPI can be through
> > external irqchip (e.g. RISC-V AIA), through platform specific device
> > (e.g. SiFive CLINT timer), or through firmware (e.g. SBI IPI call).
> >
> > To support multiple IPIs on RISC-V, we add a generic IPI multiplexing
> > mechanism which help us create multiple virtual IPIs using a single
> > HW IPI. This generic IPI multiplexing is shared among various RISC-V
> > irqchip drivers.
> >
> > Signed-off-by: Anup Patel <apatel@ventanamicro.com>
> > ---
> >  include/linux/irq.h  |  11 +++
> >  kernel/irq/Kconfig   |   4 +
> >  kernel/irq/Makefile  |   1 +
> >  kernel/irq/ipi-mux.c | 197 +++++++++++++++++++++++++++++++++++++++++++
> >  4 files changed, 213 insertions(+)
> >  create mode 100644 kernel/irq/ipi-mux.c
> >
> > diff --git a/include/linux/irq.h b/include/linux/irq.h
> > index f92788ccdba2..5bb4e2db63d7 100644
> > --- a/include/linux/irq.h
> > +++ b/include/linux/irq.h
> > @@ -1247,6 +1247,17 @@ int __ipi_send_mask(struct irq_desc *desc, const struct cpumask *dest);
> >  int ipi_send_single(unsigned int virq, unsigned int cpu);
> >  int ipi_send_mask(unsigned int virq, const struct cpumask *dest);
> >
> > +#define IPI_MUX_NR_IRQS              BITS_PER_LONG
> > +
> > +struct ipi_mux_ops {
> > +     void (*ipi_mux_clear)(unsigned int parent_virq);
> > +     void (*ipi_mux_send)(unsigned int parent_virq,
> > +                          const struct cpumask *mask);
>
> You really cannot just dump this like this. This requires
> documentation so that architecture maintainers can move over to this.
> I appreciate that this area is pretty poorly documented, but we need
> to start somewhere.

Okay, I will add documentation.

>
> > +};
> > +
> > +void ipi_mux_process(void);
> > +int ipi_mux_create(unsigned int parent_virq, const struct ipi_mux_ops *ops);
> > +
> >  #ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
> >  /*
> >   * Registers a generic IRQ handling function as the top-level IRQ handler in
> > diff --git a/kernel/irq/Kconfig b/kernel/irq/Kconfig
> > index 10929eda9825..2388e7d40ed3 100644
> > --- a/kernel/irq/Kconfig
> > +++ b/kernel/irq/Kconfig
> > @@ -84,6 +84,10 @@ config GENERIC_IRQ_IPI
> >       bool
> >       select IRQ_DOMAIN_HIERARCHY
> >
> > +# Generic IRQ IPI Mux support
> > +config GENERIC_IRQ_IPI_MUX
> > +     bool
> > +
> >  # Generic MSI interrupt support
> >  config GENERIC_MSI_IRQ
> >       bool
> > diff --git a/kernel/irq/Makefile b/kernel/irq/Makefile
> > index b4f53717d143..f19d3080bf11 100644
> > --- a/kernel/irq/Makefile
> > +++ b/kernel/irq/Makefile
> > @@ -15,6 +15,7 @@ obj-$(CONFIG_GENERIC_IRQ_MIGRATION) += cpuhotplug.o
> >  obj-$(CONFIG_PM_SLEEP) += pm.o
> >  obj-$(CONFIG_GENERIC_MSI_IRQ) += msi.o
> >  obj-$(CONFIG_GENERIC_IRQ_IPI) += ipi.o
> > +obj-$(CONFIG_GENERIC_IRQ_IPI_MUX) += ipi-mux.o
> >  obj-$(CONFIG_SMP) += affinity.o
> >  obj-$(CONFIG_GENERIC_IRQ_DEBUGFS) += debugfs.o
> >  obj-$(CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR) += matrix.o
> > diff --git a/kernel/irq/ipi-mux.c b/kernel/irq/ipi-mux.c
> > new file mode 100644
> > index 000000000000..1a1fcfe3ac54
> > --- /dev/null
> > +++ b/kernel/irq/ipi-mux.c
> > @@ -0,0 +1,197 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Multiplex several virtual IPIs over a single HW IPI.
> > + *
> > + * Copyright (c) 2022 Ventana Micro Systems Inc.
> > + */
> > +
> > +#define pr_fmt(fmt) "ipi-mux: " fmt
> > +#include <linux/cpu.h>
> > +#include <linux/init.h>
> > +#include <linux/irq.h>
> > +#include <linux/irqchip.h>
> > +#include <linux/irqchip/chained_irq.h>
> > +#include <linux/irqdomain.h>
> > +#include <linux/smp.h>
> > +
> > +static unsigned int ipi_mux_parent_virq;
> > +static struct irq_domain *ipi_mux_domain;
> > +static const struct  ipi_mux_ops *ipi_mux_ops;
> > +static DEFINE_PER_CPU(unsigned long, ipi_mux_bits);
> > +
> > +static void ipi_mux_dummy(struct irq_data *d)
> > +{
> > +}
> > +
> > +static void ipi_mux_send_mask(struct irq_data *d, const struct cpumask *mask)
> > +{
> > +     int cpu;
> > +
> > +     /* Barrier before doing atomic bit update to IPI bits */
> > +     smp_mb__before_atomic();
> > +
> > +     for_each_cpu(cpu, mask)
> > +             set_bit(d->hwirq, per_cpu_ptr(&ipi_mux_bits, cpu));
> > +
> > +     /* Barrier after doing atomic bit update to IPI bits */
> > +     smp_mb__after_atomic();
> > +
> > +     /* Trigger the parent IPI */
> > +     ipi_mux_ops->ipi_mux_send(ipi_mux_parent_virq, mask);
> > +}
> > +
> > +static struct irq_chip ipi_mux_chip = {
>
> const, please.

Okay, I will add const here.

>
> > +     .name           = "IPI Mux",
> > +     .irq_mask       = ipi_mux_dummy,
> > +     .irq_unmask     = ipi_mux_dummy,
>
> Maybe we should consider a flow that does not require this dummy
> callbacks.

These dummy irq_mask()/irq_unmask() were added to allow
irq_percpu_enable()/disable() for the muxed IPIs.

We are using handle_percpu_devid_irq() flow so we really
don't need these dummy irq_mask()/irq_unmask(). I will drop
these dummy calls in the next patch revision.

>
> > +     .ipi_send_mask  = ipi_mux_send_mask,
> > +};
> > +
> > +static int ipi_mux_domain_map(struct irq_domain *d, unsigned int irq,
> > +                           irq_hw_number_t hwirq)
> > +{
> > +     irq_set_percpu_devid(irq);
> > +     irq_domain_set_info(d, irq, hwirq, &ipi_mux_chip, d->host_data,
> > +                         handle_percpu_devid_irq, NULL, NULL);
> > +
> > +     return 0;
> > +}
> > +
> > +static int ipi_mux_domain_alloc(struct irq_domain *d, unsigned int virq,
> > +                             unsigned int nr_irqs, void *arg)
> > +{
> > +     unsigned int type = IRQ_TYPE_NONE;
>
> Really, this should be EDGE.

Actually, the "type" initialization is redundant because the
irq_domain_translate_onecell() function will set it anyway.

I will drop the "type" initialization here.

>
> > +     struct irq_fwspec *fwspec = arg;
> > +     irq_hw_number_t hwirq;
> > +     int i, ret;
> > +
> > +     ret = irq_domain_translate_onecell(d, fwspec, &hwirq, &type);
> > +     if (ret)
> > +             return ret;
> > +
> > +     for (i = 0; i < nr_irqs; i++) {
> > +             ret = ipi_mux_domain_map(d, virq + i, hwirq + i);
> > +             if (ret)
> > +                     return ret;
> > +     }
> > +
> > +     return 0;
> > +}
> > +
> > +static const struct irq_domain_ops ipi_mux_domain_ops = {
> > +     .translate      = irq_domain_translate_onecell,
>
> What is the purpose of this callback? Firmware shouldn't be involved
> in IPIs at all, and since you only have one cell, you can use the
> default path. This is also a dependency on CONFIG_IRQ_DOMAIN_HIERARCHY.

It's not needed. I will drop it.

>
> > +     .alloc          = ipi_mux_domain_alloc,
> > +     .free           = irq_domain_free_irqs_top,
> > +};
> > +
> > +/**
> > + * ipi_mux_process - Process multiplexed virtual IPIs
> > + */
> > +void ipi_mux_process(void)
> > +{
> > +     unsigned long irqs, *bits = this_cpu_ptr(&ipi_mux_bits);
> > +     irq_hw_number_t hwirq;
> > +     int err;
> > +
> > +     /* Clear the parent IPI */
> > +     if (ipi_mux_ops->ipi_mux_clear)
> > +             ipi_mux_ops->ipi_mux_clear(ipi_mux_parent_virq);
> > +
> > +     /*
> > +      * Barrier for IPI bits paired with smp_mb__xyz_atomic()
>
> xyz???

Okay, I will update this comment.

>
> > +      * in ipi_mux_send_mask()
> > +      */
> > +     smp_mb();
> > +
> > +     irqs = xchg(bits, 0);
> > +     if (!irqs)
> > +             return;
> > +
> > +     for_each_set_bit(hwirq, &irqs, IPI_MUX_NR_IRQS) {
> > +             err = generic_handle_domain_irq(ipi_mux_domain,
> > +                                             hwirq);
> > +             if (unlikely(err))
> > +                     pr_warn_ratelimited(
> > +                             "can't find mapping for hwirq %lu\n",
> > +                             hwirq);
> > +     }
> > +}
> > +
> > +static void ipi_mux_handler(struct irq_desc *desc)
> > +{
> > +     struct irq_chip *chip = irq_desc_get_chip(desc);
> > +
> > +     chained_irq_enter(chip, desc);
> > +     ipi_mux_process();
> > +     chained_irq_exit(chip, desc);
> > +}
> > +
> > +static int ipi_mux_dying_cpu(unsigned int cpu)
> > +{
> > +     disable_percpu_irq(ipi_mux_parent_virq);
> > +     return 0;
> > +}
> > +
> > +static int ipi_mux_starting_cpu(unsigned int cpu)
> > +{
> > +     enable_percpu_irq(ipi_mux_parent_virq,
> > +                       irq_get_trigger_type(ipi_mux_parent_virq));
> > +     return 0;
> > +}
> > +
> > +/**
> > + * ipi_mux_create - Create virtual IPIs (total IPI_MUX_NR_IRQS) multiplexed
> > + * on top of a single parent IPI.
> > + * @parent_virq:     virq of the parent IPI
> > + * @ops:             multiplexing operations for the parent IPI
> > + *
> > + * If the parent IPI > 0 then ipi_mux_process() will be automatically
> > + * called via chained handler.
> > + *
> > + * If the parent IPI <= 0 then it is responsiblity of irqchip drivers
> > + * to explicitly call ipi_mux_process() for processing muxed IPIs.
> > + *
> > + * Returns first virq of the newly created virutal IPIs upon success
> > + * or <=0 upon failure
> > + */
> > +int ipi_mux_create(unsigned int parent_virq, const struct ipi_mux_ops *ops)
> > +{
>
> Why should be parent_virq be unique? I also see nothing that checks
> that this is a per-CPU interrupt. If anything, this needs documenting.

Okay, I will add checks on parent_virq to ensure it is a percpu irq.

>
> > +     struct irq_domain *domain;
> > +     struct irq_fwspec ipi;
> > +     int virq;
> > +
> > +     if (ipi_mux_domain || !ops || !ops->ipi_mux_send)
> > +             return 0;
> > +
> > +     domain = irq_domain_add_linear(NULL, IPI_MUX_NR_IRQS,
>
> Urgh. For a start, please use the irq_domain_create_* version, as this
> shouldn't be DT specific. Then, don't use a NULL fwnode, as this
> results in a "default domain", which nobody sane should ever use
> anymore. Also, defaulting to BITS_PER_LONG is a lot of interrupts for
> not much (most archs use only a handful). You may want to consider
> this being a parameter, and cap it at BITS_PER_LONG.

Okay, I will use irq_domain_create_simple() here and also add a
parameter to ipi_mux_create() for the number of IPIs which will be
capped at BITS_PER_LONG.

>
> > +                                    &ipi_mux_domain_ops, NULL);
> > +     if (!domain) {
> > +             pr_err("unable to add IPI Mux domain\n");
> > +             return 0;
> > +     }
> > +
> > +     ipi.fwnode = domain->fwnode;
>
> Which is NULL (see above).
>
> > +     ipi.param_count = 1;
> > +     ipi.param[0] = 0;
> > +     virq = __irq_domain_alloc_irqs(domain, -1, IPI_MUX_NR_IRQS,
> > +                                    NUMA_NO_NODE, &ipi, false, NULL);
> > +     if (virq <= 0) {
> > +             pr_err("unable to alloc IRQs from IPI Mux domain\n");
> > +             irq_domain_remove(domain);
> > +             return virq;
> > +     }
> > +
> > +     ipi_mux_domain = domain;
> > +     ipi_mux_parent_virq = parent_virq;
> > +     ipi_mux_ops = ops;
> > +
> > +     if (parent_virq > 0) {
> > +             irq_set_chained_handler(parent_virq, ipi_mux_handler);
> > +
> > +             cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
> > +                               "irqchip/ipi-mux:starting",
> > +                               ipi_mux_starting_cpu, ipi_mux_dying_cpu);
> > +     }
> > +
> > +     return virq;
> > +}
>
> Thanks,
>
>         M.
>
> --
> Without deviation from the norm, progress is not possible.

Thanks Marc, I will send v7 patches soon.

Regards,
Anup

^ permalink raw reply	[flat|nested] 22+ messages in thread
* Re: [PATCH v6 3/7] genirq: Add mechanism to multiplex a single HW IPI
@ 2022-07-20 14:50       ` Anup Patel
  0 siblings, 0 replies; 22+ messages in thread
From: Anup Patel @ 2022-07-20 14:50 UTC (permalink / raw)
  To: Marc Zyngier
  Cc: Palmer Dabbelt, Paul Walmsley, Thomas Gleixner, Daniel Lezcano,
	Atish Patra, Alistair Francis, Anup Patel, linux-riscv,
	linux-kernel@vger.kernel.org List

On Tue, Jul 19, 2022 at 9:50 PM Marc Zyngier <maz@kernel.org> wrote:
>
> On Mon, 18 Apr 2022 11:53:01 +0100,
> Anup Patel <apatel@ventanamicro.com> wrote:
> >
> > All RISC-V platforms have a single HW IPI provided by the INTC local
> > interrupt controller. The HW method to trigger INTC IPI can be through
> > external irqchip (e.g. RISC-V AIA), through platform specific device
> > (e.g. SiFive CLINT timer), or through firmware (e.g. SBI IPI call).
> >
> > To support multiple IPIs on RISC-V, we add a generic IPI multiplexing
> > mechanism which help us create multiple virtual IPIs using a single
> > HW IPI. This generic IPI multiplexing is shared among various RISC-V
> > irqchip drivers.
> >
> > Signed-off-by: Anup Patel <apatel@ventanamicro.com>
> > ---
> >  include/linux/irq.h  |  11 +++
> >  kernel/irq/Kconfig   |   4 +
> >  kernel/irq/Makefile  |   1 +
> >  kernel/irq/ipi-mux.c | 197 +++++++++++++++++++++++++++++++++++++++++++
> >  4 files changed, 213 insertions(+)
> >  create mode 100644 kernel/irq/ipi-mux.c
> >
> > diff --git a/include/linux/irq.h b/include/linux/irq.h
> > index f92788ccdba2..5bb4e2db63d7 100644
> > --- a/include/linux/irq.h
> > +++ b/include/linux/irq.h
> > @@ -1247,6 +1247,17 @@ int __ipi_send_mask(struct irq_desc *desc, const struct cpumask *dest);
> >  int ipi_send_single(unsigned int virq, unsigned int cpu);
> >  int ipi_send_mask(unsigned int virq, const struct cpumask *dest);
> >
> > +#define IPI_MUX_NR_IRQS              BITS_PER_LONG
> > +
> > +struct ipi_mux_ops {
> > +     void (*ipi_mux_clear)(unsigned int parent_virq);
> > +     void (*ipi_mux_send)(unsigned int parent_virq,
> > +                          const struct cpumask *mask);
>
> You really cannot just dump this like this. This requires
> documentation so that architecture maintainers can move over to this.
> I appreciate that this area is pretty poorly documented, but we need
> to start somewhere.

Okay, I will add documentation.

>
> > +};
> > +
> > +void ipi_mux_process(void);
> > +int ipi_mux_create(unsigned int parent_virq, const struct ipi_mux_ops *ops);
> > +
> >  #ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
> >  /*
> >   * Registers a generic IRQ handling function as the top-level IRQ handler in
> > diff --git a/kernel/irq/Kconfig b/kernel/irq/Kconfig
> > index 10929eda9825..2388e7d40ed3 100644
> > --- a/kernel/irq/Kconfig
> > +++ b/kernel/irq/Kconfig
> > @@ -84,6 +84,10 @@ config GENERIC_IRQ_IPI
> >       bool
> >       select IRQ_DOMAIN_HIERARCHY
> >
> > +# Generic IRQ IPI Mux support
> > +config GENERIC_IRQ_IPI_MUX
> > +     bool
> > +
> >  # Generic MSI interrupt support
> >  config GENERIC_MSI_IRQ
> >       bool
> > diff --git a/kernel/irq/Makefile b/kernel/irq/Makefile
> > index b4f53717d143..f19d3080bf11 100644
> > --- a/kernel/irq/Makefile
> > +++ b/kernel/irq/Makefile
> > @@ -15,6 +15,7 @@ obj-$(CONFIG_GENERIC_IRQ_MIGRATION) += cpuhotplug.o
> >  obj-$(CONFIG_PM_SLEEP) += pm.o
> >  obj-$(CONFIG_GENERIC_MSI_IRQ) += msi.o
> >  obj-$(CONFIG_GENERIC_IRQ_IPI) += ipi.o
> > +obj-$(CONFIG_GENERIC_IRQ_IPI_MUX) += ipi-mux.o
> >  obj-$(CONFIG_SMP) += affinity.o
> >  obj-$(CONFIG_GENERIC_IRQ_DEBUGFS) += debugfs.o
> >  obj-$(CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR) += matrix.o
> > diff --git a/kernel/irq/ipi-mux.c b/kernel/irq/ipi-mux.c
> > new file mode 100644
> > index 000000000000..1a1fcfe3ac54
> > --- /dev/null
> > +++ b/kernel/irq/ipi-mux.c
> > @@ -0,0 +1,197 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Multiplex several virtual IPIs over a single HW IPI.
> > + *
> > + * Copyright (c) 2022 Ventana Micro Systems Inc.
> > + */
> > +
> > +#define pr_fmt(fmt) "ipi-mux: " fmt
> > +#include <linux/cpu.h>
> > +#include <linux/init.h>
> > +#include <linux/irq.h>
> > +#include <linux/irqchip.h>
> > +#include <linux/irqchip/chained_irq.h>
> > +#include <linux/irqdomain.h>
> > +#include <linux/smp.h>
> > +
> > +static unsigned int ipi_mux_parent_virq;
> > +static struct irq_domain *ipi_mux_domain;
> > +static const struct  ipi_mux_ops *ipi_mux_ops;
> > +static DEFINE_PER_CPU(unsigned long, ipi_mux_bits);
> > +
> > +static void ipi_mux_dummy(struct irq_data *d)
> > +{
> > +}
> > +
> > +static void ipi_mux_send_mask(struct irq_data *d, const struct cpumask *mask)
> > +{
> > +     int cpu;
> > +
> > +     /* Barrier before doing atomic bit update to IPI bits */
> > +     smp_mb__before_atomic();
> > +
> > +     for_each_cpu(cpu, mask)
> > +             set_bit(d->hwirq, per_cpu_ptr(&ipi_mux_bits, cpu));
> > +
> > +     /* Barrier after doing atomic bit update to IPI bits */
> > +     smp_mb__after_atomic();
> > +
> > +     /* Trigger the parent IPI */
> > +     ipi_mux_ops->ipi_mux_send(ipi_mux_parent_virq, mask);
> > +}
> > +
> > +static struct irq_chip ipi_mux_chip = {
>
> const, please.

Okay, I will add const here.

>
> > +     .name           = "IPI Mux",
> > +     .irq_mask       = ipi_mux_dummy,
> > +     .irq_unmask     = ipi_mux_dummy,
>
> Maybe we should consider a flow that does not require this dummy
> callbacks.

These dummy irq_mask()/irq_unmask() were added to allow
irq_percpu_enable()/disable() for the muxed IPIs.

We are using handle_percpu_devid_irq() flow so we really
don't need these dummy irq_mask()/irq_unmask(). I will drop
these dummy calls in the next patch revision.

>
> > +     .ipi_send_mask  = ipi_mux_send_mask,
> > +};
> > +
> > +static int ipi_mux_domain_map(struct irq_domain *d, unsigned int irq,
> > +                           irq_hw_number_t hwirq)
> > +{
> > +     irq_set_percpu_devid(irq);
> > +     irq_domain_set_info(d, irq, hwirq, &ipi_mux_chip, d->host_data,
> > +                         handle_percpu_devid_irq, NULL, NULL);
> > +
> > +     return 0;
> > +}
> > +
> > +static int ipi_mux_domain_alloc(struct irq_domain *d, unsigned int virq,
> > +                             unsigned int nr_irqs, void *arg)
> > +{
> > +     unsigned int type = IRQ_TYPE_NONE;
>
> Really, this should be EDGE.

Actually, the "type" initialization is redundant because the
irq_domain_translate_onecell() function will set it anyway.

I will drop the "type" initialization here.

>
> > +     struct irq_fwspec *fwspec = arg;
> > +     irq_hw_number_t hwirq;
> > +     int i, ret;
> > +
> > +     ret = irq_domain_translate_onecell(d, fwspec, &hwirq, &type);
> > +     if (ret)
> > +             return ret;
> > +
> > +     for (i = 0; i < nr_irqs; i++) {
> > +             ret = ipi_mux_domain_map(d, virq + i, hwirq + i);
> > +             if (ret)
> > +                     return ret;
> > +     }
> > +
> > +     return 0;
> > +}
> > +
> > +static const struct irq_domain_ops ipi_mux_domain_ops = {
> > +     .translate      = irq_domain_translate_onecell,
>
> What is the purpose of this callback? Firmware shouldn't be involved
> in IPIs at all, and since you only have one cell, you can use the
> default path. This is also a dependency on CONFIG_IRQ_DOMAIN_HIERARCHY.

It's not needed. I will drop it.

>
> > +     .alloc          = ipi_mux_domain_alloc,
> > +     .free           = irq_domain_free_irqs_top,
> > +};
> > +
> > +/**
> > + * ipi_mux_process - Process multiplexed virtual IPIs
> > + */
> > +void ipi_mux_process(void)
> > +{
> > +     unsigned long irqs, *bits = this_cpu_ptr(&ipi_mux_bits);
> > +     irq_hw_number_t hwirq;
> > +     int err;
> > +
> > +     /* Clear the parent IPI */
> > +     if (ipi_mux_ops->ipi_mux_clear)
> > +             ipi_mux_ops->ipi_mux_clear(ipi_mux_parent_virq);
> > +
> > +     /*
> > +      * Barrier for IPI bits paired with smp_mb__xyz_atomic()
>
> xyz???

Okay, I will update this comment.

>
> > +      * in ipi_mux_send_mask()
> > +      */
> > +     smp_mb();
> > +
> > +     irqs = xchg(bits, 0);
> > +     if (!irqs)
> > +             return;
> > +
> > +     for_each_set_bit(hwirq, &irqs, IPI_MUX_NR_IRQS) {
> > +             err = generic_handle_domain_irq(ipi_mux_domain,
> > +                                             hwirq);
> > +             if (unlikely(err))
> > +                     pr_warn_ratelimited(
> > +                             "can't find mapping for hwirq %lu\n",
> > +                             hwirq);
> > +     }
> > +}
> > +
> > +static void ipi_mux_handler(struct irq_desc *desc)
> > +{
> > +     struct irq_chip *chip = irq_desc_get_chip(desc);
> > +
> > +     chained_irq_enter(chip, desc);
> > +     ipi_mux_process();
> > +     chained_irq_exit(chip, desc);
> > +}
> > +
> > +static int ipi_mux_dying_cpu(unsigned int cpu)
> > +{
> > +     disable_percpu_irq(ipi_mux_parent_virq);
> > +     return 0;
> > +}
> > +
> > +static int ipi_mux_starting_cpu(unsigned int cpu)
> > +{
> > +     enable_percpu_irq(ipi_mux_parent_virq,
> > +                       irq_get_trigger_type(ipi_mux_parent_virq));
> > +     return 0;
> > +}
> > +
> > +/**
> > + * ipi_mux_create - Create virtual IPIs (total IPI_MUX_NR_IRQS) multiplexed
> > + * on top of a single parent IPI.
> > + * @parent_virq:     virq of the parent IPI
> > + * @ops:             multiplexing operations for the parent IPI
> > + *
> > + * If the parent IPI > 0 then ipi_mux_process() will be automatically
> > + * called via chained handler.
> > + *
> > + * If the parent IPI <= 0 then it is responsiblity of irqchip drivers
> > + * to explicitly call ipi_mux_process() for processing muxed IPIs.
> > + *
> > + * Returns first virq of the newly created virutal IPIs upon success
> > + * or <=0 upon failure
> > + */
> > +int ipi_mux_create(unsigned int parent_virq, const struct ipi_mux_ops *ops)
> > +{
>
> Why should be parent_virq be unique? I also see nothing that checks
> that this is a per-CPU interrupt. If anything, this needs documenting.

Okay, I will add checks on parent_virq to ensure it is a percpu irq.

>
> > +     struct irq_domain *domain;
> > +     struct irq_fwspec ipi;
> > +     int virq;
> > +
> > +     if (ipi_mux_domain || !ops || !ops->ipi_mux_send)
> > +             return 0;
> > +
> > +     domain = irq_domain_add_linear(NULL, IPI_MUX_NR_IRQS,
>
> Urgh. For a start, please use the irq_domain_create_* version, as this
> shouldn't be DT specific. Then, don't use a NULL fwnode, as this
> results in a "default domain", which nobody sane should ever use
> anymore. Also, defaulting to BITS_PER_LONG is a lot of interrupts for
> not much (most archs use only a handful). You may want to consider
> this being a parameter, and cap it at BITS_PER_LONG.

Okay, I will use irq_domain_create_simple() here and also add a
parameter to ipi_mux_create() for the number of IPIs which will be
capped at BITS_PER_LONG.

>
> > +                                    &ipi_mux_domain_ops, NULL);
> > +     if (!domain) {
> > +             pr_err("unable to add IPI Mux domain\n");
> > +             return 0;
> > +     }
> > +
> > +     ipi.fwnode = domain->fwnode;
>
> Which is NULL (see above).
>
> > +     ipi.param_count = 1;
> > +     ipi.param[0] = 0;
> > +     virq = __irq_domain_alloc_irqs(domain, -1, IPI_MUX_NR_IRQS,
> > +                                    NUMA_NO_NODE, &ipi, false, NULL);
> > +     if (virq <= 0) {
> > +             pr_err("unable to alloc IRQs from IPI Mux domain\n");
> > +             irq_domain_remove(domain);
> > +             return virq;
> > +     }
> > +
> > +     ipi_mux_domain = domain;
> > +     ipi_mux_parent_virq = parent_virq;
> > +     ipi_mux_ops = ops;
> > +
> > +     if (parent_virq > 0) {
> > +             irq_set_chained_handler(parent_virq, ipi_mux_handler);
> > +
> > +             cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
> > +                               "irqchip/ipi-mux:starting",
> > +                               ipi_mux_starting_cpu, ipi_mux_dying_cpu);
> > +     }
> > +
> > +     return virq;
> > +}
>
> Thanks,
>
>         M.
>
> --
> Without deviation from the norm, progress is not possible.

Thanks Marc, I will send v7 patches soon.

Regards,
Anup

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

^ permalink raw reply	[flat|nested] 22+ messages in thread
end of thread, other threads:[~2022-07-20 14:52 UTC | newest]

Thread overview: 22+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-04-18 10:52 [PATCH v6 0/7] RISC-V IPI Improvements Anup Patel
2022-04-18 10:52 ` Anup Patel
2022-04-18 10:52 ` [PATCH v6 1/7] RISC-V: Clear SIP bit only when using SBI IPI operations Anup Patel
2022-04-18 10:52   ` Anup Patel
2022-04-18 10:53 ` [PATCH v6 2/7] irqchip/riscv-intc: Allow drivers to directly discover INTC hwnode Anup Patel
2022-04-18 10:53   ` Anup Patel
2022-04-18 10:53 ` [PATCH v6 3/7] genirq: Add mechanism to multiplex a single HW IPI Anup Patel
2022-04-18 10:53   ` Anup Patel
2022-07-19 16:20   ` Marc Zyngier
2022-07-19 16:20     ` Marc Zyngier
2022-07-20 14:50     ` Anup Patel
2022-07-20 14:50       ` Anup Patel
2022-04-18 10:53 ` [PATCH v6 4/7] RISC-V: Treat IPIs as normal Linux IRQs Anup Patel
2022-04-18 10:53   ` Anup Patel
2022-04-18 10:53 ` [PATCH v6 5/7] RISC-V: Allow marking IPIs as suitable for remote FENCEs Anup Patel
2022-04-18 10:53   ` Anup Patel
2022-04-18 10:53 ` [PATCH v6 6/7] RISC-V: Use IPIs for remote TLB flush when possible Anup Patel
2022-04-18 10:53   ` Anup Patel
2022-04-18 10:53 ` [PATCH v6 7/7] RISC-V: Use IPIs for remote icache " Anup Patel
2022-04-18 10:53   ` Anup Patel
2022-07-05  6:01 ` [PATCH v6 0/7] RISC-V IPI Improvements Anup Patel
2022-07-05  6:01   ` Anup Patel

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.