[PATCH v2 0/6] Convert Qcom BAM dma binding to json format

[PATCH v2 0/6] Convert Qcom BAM dma binding to json format

[Kuldeep Singh]

v2:
- Add more variants of ip4019-ap/dk-{01/04/07} for dma node rename
- Add #dma-cells in binding file
- use additionalproperties as false
---

Patch 1,2,3,4,5 require generic node name for dma and 6/6 is actual
conversion change.

Looking forward towards review comments. Thanks!

Kuldeep Singh (6):
  ARM: dts: qcom: apq8064: User generic node name for DMA
  ARM: dts: qcom: mdm9615: User generic node name for DMA
  arm64: dts: qcom: msm8996: User generic node name for DMA
  ARM: dts: qcom: ipq4019: User generic node name for DMA
  ARM: dts: qcom: ipq8064: User generic node name for DMA
  dt-bindings: dma: Convert Qualcomm BAM DMA binding to json format

 .../devicetree/bindings/dma/qcom,bam-dma.yaml | 94 +++++++++++++++++++
 .../devicetree/bindings/dma/qcom_bam_dma.txt  | 52 ----------
 arch/arm/boot/dts/qcom-apq8064.dtsi           |  6 +-
 arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi |  4 +-
 .../boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts    |  2 +-
 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi |  2 +-
 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi |  4 +-
 arch/arm/boot/dts/qcom-ipq4019.dtsi           |  6 +-
 arch/arm/boot/dts/qcom-ipq8064.dtsi           |  4 +-
 arch/arm/boot/dts/qcom-mdm9615.dtsi           |  4 +-
 arch/arm64/boot/dts/qcom/msm8996.dtsi         |  2 +-
 11 files changed, 111 insertions(+), 69 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml
 delete mode 100644 Documentation/devicetree/bindings/dma/qcom_bam_dma.txt

-- 
2.25.1

[PATCH v2 1/6] ARM: dts: qcom: apq8064: User generic node name for DMA

[Kuldeep Singh]

Qcom BAM DT spec expects generic DMA controller node name as
"dma-controller" to enable validations.

Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
---
 arch/arm/boot/dts/qcom-apq8064.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index a1c8ae516d21..b2975be3ae04 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -1040,7 +1040,7 @@ sata0: sata@29000000 {
 		};
 
 		/* Temporary fixed regulator */
-		sdcc1bam:dma@12402000{
+		sdcc1bam: dma-controller@12402000{
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12402000 0x8000>;
 			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -1050,7 +1050,7 @@ sdcc1bam:dma@12402000{
 			qcom,ee = <0>;
 		};
 
-		sdcc3bam:dma@12182000{
+		sdcc3bam: dma-controller@12182000{
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12182000 0x8000>;
 			interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
@@ -1060,7 +1060,7 @@ sdcc3bam:dma@12182000{
 			qcom,ee = <0>;
 		};
 
-		sdcc4bam:dma@121c2000{
+		sdcc4bam: dma-controller@121c2000{
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x121c2000 0x8000>;
 			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.25.1

Re: [PATCH v2 1/6] ARM: dts: qcom: apq8064: User generic node name for DMA

[Krzysztof Kozlowski]

On 10/04/2022 19:50, Kuldeep Singh wrote:
> Qcom BAM DT spec expects generic DMA controller node name as
> "dma-controller" to enable validations.
> 
> Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
> ---
>  arch/arm/boot/dts/qcom-apq8064.dtsi | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 

All arm changes could be one commit, it's a lot of churn for just name
renaming, but anyway:

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof

Re: [PATCH v2 1/6] ARM: dts: qcom: apq8064: User generic node name for DMA

[Kuldeep Singh]

On Sun, Apr 10, 2022 at 09:08:53PM +0200, Krzysztof Kozlowski wrote:
> On 10/04/2022 19:50, Kuldeep Singh wrote:
> > Qcom BAM DT spec expects generic DMA controller node name as
> > "dma-controller" to enable validations.
> > 
> > Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
> > ---
> >  arch/arm/boot/dts/qcom-apq8064.dtsi | 6 +++---
> >  1 file changed, 3 insertions(+), 3 deletions(-)
> > 
> 
> All arm changes could be one commit, it's a lot of churn for just name
> renaming, but anyway:

Ok. Since changes were in different file that's why i kept them
separate.

> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Thanks!

[PATCH v2 2/6] ARM: dts: qcom: mdm9615: User generic node name for DMA

[Kuldeep Singh]

Qcom BAM DT spec expects generic DMA controller node name as
"dma-controller" to enable validations.

Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
---
 arch/arm/boot/dts/qcom-mdm9615.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
index 4d4f37cebf21..8f0752ce1c7b 100644
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -330,7 +330,7 @@ pmicgpio: gpio@150 {
 			};
 		};
 
-		sdcc1bam: dma@12182000{
+		sdcc1bam: dma-controller@12182000{
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12182000 0x8000>;
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -340,7 +340,7 @@ sdcc1bam: dma@12182000{
 			qcom,ee = <0>;
 		};
 
-		sdcc2bam: dma@12142000{
+		sdcc2bam: dma-controller@12142000{
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12142000 0x8000>;
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.25.1

Re: [PATCH v2 2/6] ARM: dts: qcom: mdm9615: User generic node name for DMA

[Krzysztof Kozlowski]

On 10/04/2022 19:50, Kuldeep Singh wrote:
> Qcom BAM DT spec expects generic DMA controller node name as
> "dma-controller" to enable validations.
> 
> Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
> ---
>  arch/arm/boot/dts/qcom-mdm9615.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof

[PATCH v2 3/6] arm64: dts: qcom: msm8996: User generic node name for DMA

[Kuldeep Singh]

Qcom BAM DT spec expects generic DMA controller node name as
"dma-controller" to enable validations.

Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index f0f81c23c16f..bbe677b9e5bf 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -707,7 +707,7 @@ tsens1: thermal-sensor@4ad000 {
 			#thermal-sensor-cells = <1>;
 		};
 
-		cryptobam: dma@644000 {
+		cryptobam: dma-controller@644000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x00644000 0x24000>;
 			interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.25.1

Re: [PATCH v2 3/6] arm64: dts: qcom: msm8996: User generic node name for DMA

[Krzysztof Kozlowski]

On 10/04/2022 19:50, Kuldeep Singh wrote:
> Qcom BAM DT spec expects generic DMA controller node name as
> "dma-controller" to enable validations.
> 
> Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
> ---
>  arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof

[PATCH v2 4/6] ARM: dts: qcom: ipq4019: User generic node name for DMA

[Kuldeep Singh]

Qcom BAM DT spec expects generic DMA controller node name as
"dma-controller" to enable validations.

Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
---
 arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi   | 4 ++--
 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts | 2 +-
 arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi   | 2 +-
 arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi   | 4 ++--
 arch/arm/boot/dts/qcom-ipq4019.dtsi             | 6 +++---
 5 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
index 0c10d9e096db..03bb9e1768c4 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
@@ -64,7 +64,7 @@ pinconf_cs {
 			};
 		};
 
-		blsp_dma: dma@7884000 {
+		blsp_dma: dma-controller@7884000 {
 			status = "okay";
 		};
 
@@ -89,7 +89,7 @@ serial@78af000 {
 			status = "okay";
 		};
 
-		cryptobam: dma@8e04000 {
+		cryptobam: dma-controller@8e04000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
index a7b1201dd614..79b0c6318e52 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts
@@ -8,7 +8,7 @@ / {
 	compatible = "qcom,ipq4019-dk04.1-c1", "qcom,ipq4019";
 
 	soc {
-		dma@7984000 {
+		dma-controller@7984000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
index 7a337dc08741..2a43367692fd 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
@@ -79,7 +79,7 @@ serial@78b0000 {
 			status = "okay";
 		};
 
-		dma@7884000 {
+		dma-controller@7884000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
index 94872518b5a2..0107f552f520 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi
@@ -52,7 +52,7 @@ serial@78af000 {
 			status = "okay";
 		};
 
-		dma@7884000 {
+		dma-controller@7884000 {
 			status = "okay";
 		};
 
@@ -62,7 +62,7 @@ i2c@78b7000 { /* BLSP1 QUP2 */
 			status = "okay";
 		};
 
-		dma@7984000 {
+		dma-controller@7984000 {
 			status = "okay";
 		};
 
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index a9d0566a3190..258510eb30fc 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -233,7 +233,7 @@ sdhci: sdhci@7824900 {
 			status = "disabled";
 		};
 
-		blsp_dma: dma@7884000 {
+		blsp_dma: dma-controller@7884000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x07884000 0x23000>;
 			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
@@ -300,7 +300,7 @@ blsp1_i2c4: i2c@78b8000 { /* BLSP1 QUP4 */
 			status = "disabled";
 		};
 
-		cryptobam: dma@8e04000 {
+		cryptobam: dma-controller@8e04000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x08e04000 0x20000>;
 			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
@@ -471,7 +471,7 @@ pcie0: pci@40000000 {
 			status = "disabled";
 		};
 
-		qpic_bam: dma@7984000 {
+		qpic_bam: dma-controller@7984000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x7984000 0x1a000>;
 			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.25.1

Re: [PATCH v2 4/6] ARM: dts: qcom: ipq4019: User generic node name for DMA

[Krzysztof Kozlowski]

On 10/04/2022 19:50, Kuldeep Singh wrote:
> Qcom BAM DT spec expects generic DMA controller node name as
> "dma-controller" to enable validations.
> 
> Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
> ---
>  arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi   | 4 ++--
>  arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts | 2 +-
>  arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi   | 2 +-
>  arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1.dtsi   | 4 ++--
>  arch/arm/boot/dts/qcom-ipq4019.dtsi             | 6 +++---
>  5 files changed, 9 insertions(+), 9 deletions(-)
> 


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof

[PATCH v2 5/6] ARM: dts: qcom: ipq8064: User generic node name for DMA

[Kuldeep Singh]

Qcom BAM DT spec expects generic DMA controller node name as
"dma-controller" to enable validations.

Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
---
 arch/arm/boot/dts/qcom-ipq8064.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 996f4458d9fc..8366310ca5e3 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -1155,7 +1155,7 @@ vsdcc_fixed: vsdcc-regulator {
 			regulator-always-on;
 		};
 
-		sdcc1bam: dma@12402000 {
+		sdcc1bam: dma-controller@12402000 {
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12402000 0x8000>;
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -1165,7 +1165,7 @@ sdcc1bam: dma@12402000 {
 			qcom,ee = <0>;
 		};
 
-		sdcc3bam: dma@12182000 {
+		sdcc3bam: dma-controller@12182000 {
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12182000 0x8000>;
 			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.25.1

Re: [PATCH v2 5/6] ARM: dts: qcom: ipq8064: User generic node name for DMA

[Krzysztof Kozlowski]

On 10/04/2022 19:50, Kuldeep Singh wrote:
> Qcom BAM DT spec expects generic DMA controller node name as
> "dma-controller" to enable validations.
> 
> Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
> ---
>  arch/arm/boot/dts/qcom-ipq8064.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof

[PATCH v2 6/6] dt-bindings: dma: Convert Qualcomm BAM DMA binding to json format

[Kuldeep Singh]

Convert Qualcomm BAM DMA controller binding to DT schema format using
json schema.

Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
---
 .../devicetree/bindings/dma/qcom,bam-dma.yaml | 94 +++++++++++++++++++
 .../devicetree/bindings/dma/qcom_bam_dma.txt  | 52 ----------
 2 files changed, 94 insertions(+), 52 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml
 delete mode 100644 Documentation/devicetree/bindings/dma/qcom_bam_dma.txt

diff --git a/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml b/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml
new file mode 100644
index 000000000000..b32175d54dca
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/qcom,bam-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies Inc BAM DMA controller
+
+maintainers:
+  - Andy Gross <agross@kernel.org>
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - qcom,bam-v1.3.0
+      - qcom,bam-v1.4.0
+      - qcom,bam-v1.7.0
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: bam_clk
+
+  "#dma-cells":
+    const: 1
+
+  interrupts:
+    maxItems: 1
+
+  iommus:
+    minItems: 1
+    maxItems: 4
+
+  num-channels:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Indicates supported number of DMA channels in a remotely controlled bam.
+
+  qcom,controlled-remotely:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates that the bam is controlled by remote proccessor i.e. execution
+      environment.
+
+  qcom,ee:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Indicates the active Execution Environment identifier (0-7) used in the
+      secure world.
+
+  qcom,num-ees:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Indicates supported number of Execution Environments in a remotely
+      controlled bam.
+
+  qcom,powered-remotely:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates that the bam is powered up by a remote processor but must be
+      initialized by the local processor.
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#dma-cells"
+  - interrupts
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,gcc-msm8974.h>
+
+    dma-controller@f9944000 {
+        compatible = "qcom,bam-v1.4.0";
+        reg = <0xf9944000 0x15000>;
+        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+        clock-names = "bam_clk";
+        #dma-cells = <1>;
+        qcom,ee = <0>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
deleted file mode 100644
index 6e9a5497b3f2..000000000000
--- a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-QCOM BAM DMA controller
-
-Required properties:
-- compatible: must be one of the following:
- * "qcom,bam-v1.4.0" for MSM8974, APQ8074 and APQ8084
- * "qcom,bam-v1.3.0" for APQ8064, IPQ8064 and MSM8960
- * "qcom,bam-v1.7.0" for MSM8916
-- reg: Address range for DMA registers
-- interrupts: Should contain the one interrupt shared by all channels
-- #dma-cells: must be <1>, the cell in the dmas property of the client device
-  represents the channel number
-- clocks: required clock
-- clock-names: must contain "bam_clk" entry
-- qcom,ee : indicates the active Execution Environment identifier (0-7) used in
-  the secure world.
-- qcom,controlled-remotely : optional, indicates that the bam is controlled by
-  remote proccessor i.e. execution environment.
-- qcom,powered-remotely : optional, indicates that the bam is powered up by
-  a remote processor but must be initialized by the local processor.
-- num-channels : optional, indicates supported number of DMA channels in a
-  remotely controlled bam.
-- qcom,num-ees : optional, indicates supported number of Execution Environments
-  in a remotely controlled bam.
-
-Example:
-
-	uart-bam: dma@f9984000 = {
-		compatible = "qcom,bam-v1.4.0";
-		reg = <0xf9984000 0x15000>;
-		interrupts = <0 94 0>;
-		clocks = <&gcc GCC_BAM_DMA_AHB_CLK>;
-		clock-names = "bam_clk";
-		#dma-cells = <1>;
-		qcom,ee = <0>;
-	};
-
-DMA clients must use the format described in the dma.txt file, using a two cell
-specifier for each channel.
-
-Example:
-	serial@f991e000 {
-		compatible = "qcom,msm-uart";
-		reg = <0xf991e000 0x1000>
-			<0xf9944000 0x19000>;
-		interrupts = <0 108 0>;
-		clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
-			<&gcc GCC_BLSP1_AHB_CLK>;
-		clock-names = "core", "iface";
-
-		dmas = <&uart-bam 0>, <&uart-bam 1>;
-		dma-names = "rx", "tx";
-	};
-- 
2.25.1

Re: [PATCH v2 6/6] dt-bindings: dma: Convert Qualcomm BAM DMA binding to json format

[Krzysztof Kozlowski]

On 10/04/2022 19:50, Kuldeep Singh wrote:
> Convert Qualcomm BAM DMA controller binding to DT schema format using
> json schema.

Thank you for your patch. There is something to discuss/improve.

(...)

> +
> +  interrupts:
> +    maxItems: 1
> +
> +  iommus:
> +    minItems: 1
> +    maxItems: 4

This is something new and it seems only one SoC defines it (not even one
BAM version). I wonder whether this is actually correct or this
particular version of BAM is slightly different. Maybe someone could
clarify it, but if no - looks ok.

> +
> +  num-channels:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      Indicates supported number of DMA channels in a remotely controlled bam.
> +
> +  qcom,controlled-remotely:
> +    $ref: /schemas/types.yaml#/definitions/flag

type: boolean

> +    description:
> +      Indicates that the bam is controlled by remote proccessor i.e. execution
> +      environment.
> +
> +  qcom,ee:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      Indicates the active Execution Environment identifier (0-7) used in the
> +      secure world.

maximum: 7

> +
> +  qcom,num-ees:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      Indicates supported number of Execution Environments in a remotely
> +      controlled bam.
> +
> +  qcom,powered-remotely:
> +    $ref: /schemas/types.yaml#/definitions/flag

type: boolean

> +    description:
> +      Indicates that the bam is powered up by a remote processor but must be
> +      initialized by the local processor.
> +
> +  reg:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - "#dma-cells"
> +  - interrupts
> +  - reg

clocks, clock-names, qcom-ee - these are required according to old bindings.


Best regards,
Krzysztof

Re: [PATCH v2 6/6] dt-bindings: dma: Convert Qualcomm BAM DMA binding to json format

[Kuldeep Singh]

> This is something new and it seems only one SoC defines it (not even one
> BAM version). I wonder whether this is actually correct or this
> particular version of BAM is slightly different. Maybe someone could
> clarify it, but if no - looks ok.

Yes, sdm845.dtsi uses 4 entries and rest 1.

> 
> > +
> > +  num-channels:
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    description:
> > +      Indicates supported number of DMA channels in a remotely controlled bam.
> > +
> > +  qcom,controlled-remotely:
> > +    $ref: /schemas/types.yaml#/definitions/flag
> 
> type: boolean

Boolean comes under flag in types.yaml

definitions:
  flag:
    oneOf:
      - type: boolean
        const: true
      - type: 'null'

I have seen other boolean properties(spi-cpol, spi-cpha and bunch of
others) using type flag. I think we should keep flag here.

> 
> > +    description:
> > +      Indicates that the bam is controlled by remote proccessor i.e. execution
> > +      environment.
> > +
> > +  qcom,ee:
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    description:
> > +      Indicates the active Execution Environment identifier (0-7) used in the
> > +      secure world.
> 
> maximum: 7

ok.

> > +required:
> > +  - compatible
> > +  - "#dma-cells"
> > +  - interrupts
> > +  - reg
> 
> clocks, clock-names, qcom-ee - these are required according to old bindings.

I missed qcom,ee. Will add in v3.

For clocks and clock-names , there are two platforms(msm8996.dtsi,
sdm845.dtsi) where these properties are missing. And I don't want to add
some random values. Shall I skip them here? and let board owners add
them later.

Re: [PATCH v2 6/6] dt-bindings: dma: Convert Qualcomm BAM DMA binding to json format

[Krzysztof Kozlowski]

On 11/04/2022 12:58, Kuldeep Singh wrote:
>> This is something new and it seems only one SoC defines it (not even one
>> BAM version). I wonder whether this is actually correct or this
>> particular version of BAM is slightly different. Maybe someone could
>> clarify it, but if no - looks ok.
> 
> Yes, sdm845.dtsi uses 4 entries and rest 1.

Yes, I know. This does not solve my wonder.

> 
>>
>>> +
>>> +  num-channels:
>>> +    $ref: /schemas/types.yaml#/definitions/uint32
>>> +    description:
>>> +      Indicates supported number of DMA channels in a remotely controlled bam.
>>> +
>>> +  qcom,controlled-remotely:
>>> +    $ref: /schemas/types.yaml#/definitions/flag
>>
>> type: boolean
> 
> Boolean comes under flag in types.yaml
> 
> definitions:
>   flag:
>     oneOf:
>       - type: boolean
>         const: true
>       - type: 'null'
> 
> I have seen other boolean properties(spi-cpol, spi-cpha and bunch of
> others) using type flag. I think we should keep flag here.

type:boolean is just shorter and example-schema recommends it. If you
want to base on something (as a template, pattern) then the
example-schema is the source, the preferred one.

>>> +required:
>>> +  - compatible
>>> +  - "#dma-cells"
>>> +  - interrupts
>>> +  - reg
>>
>> clocks, clock-names, qcom-ee - these are required according to old bindings.
> 
> I missed qcom,ee. Will add in v3.
> 
> For clocks and clock-names , there are two platforms(msm8996.dtsi,
> sdm845.dtsi) where these properties are missing. And I don't want to add
> some random values. Shall I skip them here? and let board owners add
> them later.

These are required, so the SoC DTSI should be fixed. Not with random
clocks but something proper. :)

Best regards,
Krzysztof

Re: [PATCH v2 6/6] dt-bindings: dma: Convert Qualcomm BAM DMA binding to json format

[Kuldeep Singh]

On Mon, Apr 11, 2022 at 01:38:41PM +0200, Krzysztof Kozlowski wrote:
> On 11/04/2022 12:58, Kuldeep Singh wrote:
> >> This is something new and it seems only one SoC defines it (not even one
> >> BAM version). I wonder whether this is actually correct or this
> >> particular version of BAM is slightly different. Maybe someone could
> >> clarify it, but if no - looks ok.
> > 
> > Yes, sdm845.dtsi uses 4 entries and rest 1.
> 
> Yes, I know. This does not solve my wonder.
> 
> > 
> >>
> >>> +
> >>> +  num-channels:
> >>> +    $ref: /schemas/types.yaml#/definitions/uint32
> >>> +    description:
> >>> +      Indicates supported number of DMA channels in a remotely controlled bam.
> >>> +
> >>> +  qcom,controlled-remotely:
> >>> +    $ref: /schemas/types.yaml#/definitions/flag
> >>
> >> type: boolean
> > 
> > Boolean comes under flag in types.yaml
> > 
> > definitions:
> >   flag:
> >     oneOf:
> >       - type: boolean
> >         const: true
> >       - type: 'null'
> > 
> > I have seen other boolean properties(spi-cpol, spi-cpha and bunch of
> > others) using type flag. I think we should keep flag here.
> 
> type:boolean is just shorter and example-schema recommends it. If you
> want to base on something (as a template, pattern) then the
> example-schema is the source, the preferred one.

I had seen other spec using flag and that's why kept same here.
Which example schema are you talking about?

> >>
> >> clocks, clock-names, qcom-ee - these are required according to old bindings.
> > 
> > I missed qcom,ee. Will add in v3.
> > 
> > For clocks and clock-names , there are two platforms(msm8996.dtsi,
> > sdm845.dtsi) where these properties are missing. And I don't want to add
> > some random values. Shall I skip them here? and let board owners add
> > them later.
> 
> These are required, so the SoC DTSI should be fixed. Not with random
> clocks but something proper. :)

Yes absolutely :-)
I have kept Srinivas in copy, who sent initial support for both the
dtsi. Probably he can confirm provided his email doesn't bounce.

Anyway Krzysztof, can you confirm the same as you have been actively
contributing to Qcom peripherals. I will add credit in follow-up
submission.

Re: [PATCH v2 6/6] dt-bindings: dma: Convert Qualcomm BAM DMA binding to json format

[Krzysztof Kozlowski]

On 12/04/2022 08:19, Kuldeep Singh wrote:
> On Mon, Apr 11, 2022 at 01:38:41PM +0200, Krzysztof Kozlowski wrote:
>> On 11/04/2022 12:58, Kuldeep Singh wrote:
>>>> This is something new and it seems only one SoC defines it (not even one
>>>> BAM version). I wonder whether this is actually correct or this
>>>> particular version of BAM is slightly different. Maybe someone could
>>>> clarify it, but if no - looks ok.
>>>
>>> Yes, sdm845.dtsi uses 4 entries and rest 1.
>>
>> Yes, I know. This does not solve my wonder.
>>
>>>
>>>>
>>>>> +
>>>>> +  num-channels:
>>>>> +    $ref: /schemas/types.yaml#/definitions/uint32
>>>>> +    description:
>>>>> +      Indicates supported number of DMA channels in a remotely controlled bam.
>>>>> +
>>>>> +  qcom,controlled-remotely:
>>>>> +    $ref: /schemas/types.yaml#/definitions/flag
>>>>
>>>> type: boolean
>>>
>>> Boolean comes under flag in types.yaml
>>>
>>> definitions:
>>>   flag:
>>>     oneOf:
>>>       - type: boolean
>>>         const: true
>>>       - type: 'null'
>>>
>>> I have seen other boolean properties(spi-cpol, spi-cpha and bunch of
>>> others) using type flag. I think we should keep flag here.
>>
>> type:boolean is just shorter and example-schema recommends it. If you
>> want to base on something (as a template, pattern) then the
>> example-schema is the source, the preferred one.
> 
> I had seen other spec using flag and that's why kept same here.

I understand, you mentioned it before. However other spec is not the
example-schema...

> Which example schema are you talking about?

There is only one example-schema.
$ find ./linux -name 'example-schema*'

>>>> clocks, clock-names, qcom-ee - these are required according to old bindings.
>>>
>>> I missed qcom,ee. Will add in v3.
>>>
>>> For clocks and clock-names , there are two platforms(msm8996.dtsi,
>>> sdm845.dtsi) where these properties are missing. And I don't want to add
>>> some random values. Shall I skip them here? and let board owners add
>>> them later.
>>
>> These are required, so the SoC DTSI should be fixed. Not with random
>> clocks but something proper. :)
> 
> Yes absolutely :-)
> I have kept Srinivas in copy, who sent initial support for both the
> dtsi. Probably he can confirm provided his email doesn't bounce.
> 
> Anyway Krzysztof, can you confirm the same as you have been actively
> contributing to Qcom peripherals. I will add credit in follow-up
> submission.

Honestly not now, because I don't have access to related datasheets (I
am working on this). You can though try to look at original (vendor)
sources:
https://git.codelinaro.org/clo/la/kernel/msm-4.19 (sdm845)
https://git.codelinaro.org/clo/la/kernel/msm-3.18 (msm8996)


Best regards,
Krzysztof

Re: [PATCH v2 6/6] dt-bindings: dma: Convert Qualcomm BAM DMA binding to json format

[Kuldeep Singh]

> > Which example schema are you talking about?
> 
> There is only one example-schema.
> $ find ./linux -name 'example-schema*'

Example seems good to me. I will change to boolean.

> > Anyway Krzysztof, can you confirm the same as you have been actively
> > contributing to Qcom peripherals. I will add credit in follow-up
> > submission.
> 
> Honestly not now, because I don't have access to related datasheets (I
> am working on this).

Yes definitely and you also must be having bunch of items in your todo list.
Actually, I also don't have access to datasheets that's why was looking
for inputs.

> You can though try to look at original (vendor) sources:
> https://git.codelinaro.org/clo/la/kernel/msm-4.19 (sdm845)
> https://git.codelinaro.org/clo/la/kernel/msm-3.18 (msm8996)

Great. I'll see if I can make most out of it.

Re: [PATCH v2 6/6] dt-bindings: dma: Convert Qualcomm BAM DMA binding to json format

[Kuldeep Singh]

> > You can though try to look at original (vendor) sources:
> > https://git.codelinaro.org/clo/la/kernel/msm-4.19 (sdm845)
> > https://git.codelinaro.org/clo/la/kernel/msm-3.18 (msm8996)

I gave a look at this and couldn't find much info related to these
platforms. And waited for sometime to get reply from Srinivas and other
co.

I don't think it's viable to wait just for this particular thing and
also doesn't make much sense either. I will send next version as per
your current comments. Thanks!

Re: [PATCH v2 6/6] dt-bindings: dma: Convert Qualcomm BAM DMA binding to json format

[Bhupesh Sharma]

Hi Kuldeep,

On Sun, 10 Apr 2022 at 23:21, Kuldeep Singh <singh.kuldeep87k@gmail.com> wrote:
>
> Convert Qualcomm BAM DMA controller binding to DT schema format using
> json schema.

Please see <https://lore.kernel.org/lkml/20220211214941.f55q5yksittut3ep@amazon.com/T/#m6700c2695ee78e79060ac338d208ffd08ac39592>,
I already have an effort ongoing for converting qcom bam DMA bindings
to YAML format.

I will send a new version of the same shortly. Please try and use the same.

Thanks,
Bhupesh

> Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
> ---
>  .../devicetree/bindings/dma/qcom,bam-dma.yaml | 94 +++++++++++++++++++
>  .../devicetree/bindings/dma/qcom_bam_dma.txt  | 52 ----------
>  2 files changed, 94 insertions(+), 52 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml
>  delete mode 100644 Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
>
> diff --git a/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml b/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml
> new file mode 100644
> index 000000000000..b32175d54dca
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml
> @@ -0,0 +1,94 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/dma/qcom,bam-dma.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies Inc BAM DMA controller
> +
> +maintainers:
> +  - Andy Gross <agross@kernel.org>
> +  - Bjorn Andersson <bjorn.andersson@linaro.org>
> +
> +allOf:
> +  - $ref: "dma-controller.yaml#"
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,bam-v1.3.0
> +      - qcom,bam-v1.4.0
> +      - qcom,bam-v1.7.0
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    items:
> +      - const: bam_clk
> +
> +  "#dma-cells":
> +    const: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  iommus:
> +    minItems: 1
> +    maxItems: 4
> +
> +  num-channels:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      Indicates supported number of DMA channels in a remotely controlled bam.
> +
> +  qcom,controlled-remotely:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description:
> +      Indicates that the bam is controlled by remote proccessor i.e. execution
> +      environment.
> +
> +  qcom,ee:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      Indicates the active Execution Environment identifier (0-7) used in the
> +      secure world.
> +
> +  qcom,num-ees:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      Indicates supported number of Execution Environments in a remotely
> +      controlled bam.
> +
> +  qcom,powered-remotely:
> +    $ref: /schemas/types.yaml#/definitions/flag
> +    description:
> +      Indicates that the bam is powered up by a remote processor but must be
> +      initialized by the local processor.
> +
> +  reg:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - "#dma-cells"
> +  - interrupts
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/qcom,gcc-msm8974.h>
> +
> +    dma-controller@f9944000 {
> +        compatible = "qcom,bam-v1.4.0";
> +        reg = <0xf9944000 0x15000>;
> +        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
> +        clocks = <&gcc GCC_BLSP2_AHB_CLK>;
> +        clock-names = "bam_clk";
> +        #dma-cells = <1>;
> +        qcom,ee = <0>;
> +    };
> +...
> diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
> deleted file mode 100644
> index 6e9a5497b3f2..000000000000
> --- a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
> +++ /dev/null
> @@ -1,52 +0,0 @@
> -QCOM BAM DMA controller
> -
> -Required properties:
> -- compatible: must be one of the following:
> - * "qcom,bam-v1.4.0" for MSM8974, APQ8074 and APQ8084
> - * "qcom,bam-v1.3.0" for APQ8064, IPQ8064 and MSM8960
> - * "qcom,bam-v1.7.0" for MSM8916
> -- reg: Address range for DMA registers
> -- interrupts: Should contain the one interrupt shared by all channels
> -- #dma-cells: must be <1>, the cell in the dmas property of the client device
> -  represents the channel number
> -- clocks: required clock
> -- clock-names: must contain "bam_clk" entry
> -- qcom,ee : indicates the active Execution Environment identifier (0-7) used in
> -  the secure world.
> -- qcom,controlled-remotely : optional, indicates that the bam is controlled by
> -  remote proccessor i.e. execution environment.
> -- qcom,powered-remotely : optional, indicates that the bam is powered up by
> -  a remote processor but must be initialized by the local processor.
> -- num-channels : optional, indicates supported number of DMA channels in a
> -  remotely controlled bam.
> -- qcom,num-ees : optional, indicates supported number of Execution Environments
> -  in a remotely controlled bam.
> -
> -Example:
> -
> -       uart-bam: dma@f9984000 = {
> -               compatible = "qcom,bam-v1.4.0";
> -               reg = <0xf9984000 0x15000>;
> -               interrupts = <0 94 0>;
> -               clocks = <&gcc GCC_BAM_DMA_AHB_CLK>;
> -               clock-names = "bam_clk";
> -               #dma-cells = <1>;
> -               qcom,ee = <0>;
> -       };
> -
> -DMA clients must use the format described in the dma.txt file, using a two cell
> -specifier for each channel.
> -
> -Example:
> -       serial@f991e000 {
> -               compatible = "qcom,msm-uart";
> -               reg = <0xf991e000 0x1000>
> -                       <0xf9944000 0x19000>;
> -               interrupts = <0 108 0>;
> -               clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
> -                       <&gcc GCC_BLSP1_AHB_CLK>;
> -               clock-names = "core", "iface";
> -
> -               dmas = <&uart-bam 0>, <&uart-bam 1>;
> -               dma-names = "rx", "tx";
> -       };
> --
> 2.25.1
>

Re: [PATCH v2 6/6] dt-bindings: dma: Convert Qualcomm BAM DMA binding to json format

[Kuldeep Singh]

On Mon, Apr 18, 2022 at 10:57:55AM +0530, Bhupesh Sharma wrote:
> Please see <https://lore.kernel.org/lkml/20220211214941.f55q5yksittut3ep@amazon.com/T/#m6700c2695ee78e79060ac338d208ffd08ac39592>,
> I already have an effort ongoing for converting qcom bam DMA bindings
> to YAML format.

Ohh ok, I wasn't aware you had similar series.
I just noticed your latest v5 version was rolled out ~5 months back,
usually this is a very long time considering the duration. Wondering
reason behind this..

My updated series(v3 version[1]) is kind of complete and mostly reviewed
by Krzysztof and takes care of armv7/8 based platforms. With no offence,
I believe we should go with the current one as your series includes
changes more than BAM and will take long time to merge. Anyway, I'll be
fine with choice of the maintainers.

Regards
Kuldeep
[1] https://lore.kernel.org/linux-devicetree/20220417210436.6203-1-singh.kuldeep87k@gmail.com/T/#m2e1df4a579d0f40e07638e117df342b886289bb0

Re: [PATCH v2 6/6] dt-bindings: dma: Convert Qualcomm BAM DMA binding to json format

[Krzysztof Kozlowski]

On 18/04/2022 21:20, Kuldeep Singh wrote:
> On Mon, Apr 18, 2022 at 10:57:55AM +0530, Bhupesh Sharma wrote:
>> Please see <https://lore.kernel.org/lkml/20220211214941.f55q5yksittut3ep@amazon.com/T/#m6700c2695ee78e79060ac338d208ffd08ac39592>,
>> I already have an effort ongoing for converting qcom bam DMA bindings
>> to YAML format.
> 
> Ohh ok, I wasn't aware you had similar series.
> I just noticed your latest v5 version was rolled out ~5 months back,
> usually this is a very long time considering the duration. Wondering
> reason behind this..
> 
> My updated series(v3 version[1]) is kind of complete and mostly reviewed
> by Krzysztof and takes care of armv7/8 based platforms. 

My review was only about patch correctness, not overall patch preference.

> With no offence,
> I believe we should go with the current one as your series includes
> changes more than BAM and will take long time to merge. Anyway, I'll be
> fine with choice of the maintainers.

I appreciate your work Kuldeep, it is important and valuable
contribution. It is sad to see duplicated effort, I don't like it for my
own patches either. In general, I believe the FIFO approach should be
applied, so in this case Bhupesh patches.

Before starting the conversion the best is to look for prior work on lore:
https://lore.kernel.org/lkml/?q=dfn%3Aqcom_bam_dma.txt
This way you could easily avoid doing the same.

Bhupesh,
Please check what was stopping your work, you might need to rebase it
and resend it.

Best regards,
Krzysztof

Re: [PATCH v2 6/6] dt-bindings: dma: Convert Qualcomm BAM DMA binding to json format

[Kuldeep Singh]

> I appreciate your work Kuldeep, it is important and valuable
> contribution. It is sad to see duplicated effort, I don't like it for my
> own patches either. In general, I believe the FIFO approach should be
> applied, so in this case Bhupesh patches.

Yep, I also agree with FIFO approach w.r.t contributions. But one thing
daunts me here is the waiting time with latest revision, it's too high.

Anyway, Bhupesh had more than BAM changes and was already on v5, I can
give benefit of doubt to him and won't argue much here.

Bhupesh, feel free to include my armv7 based dts patches in your series
otherwise you might stumble DT checks warnings.

Re: [PATCH v2 6/6] dt-bindings: dma: Convert Qualcomm BAM DMA binding to json format

[Kuldeep Singh]

On Wed, Apr 20, 2022 at 06:59:55PM +0530, Kuldeep Singh wrote:
> > I appreciate your work Kuldeep, it is important and valuable
> > contribution. It is sad to see duplicated effort, I don't like it for my
> > own patches either. In general, I believe the FIFO approach should be
> > applied, so in this case Bhupesh patches.
> 
> Yep, I also agree with FIFO approach w.r.t contributions. But one thing
> daunts me here is the waiting time with latest revision, it's too high.
> 
> Anyway, Bhupesh had more than BAM changes and was already on v5, I can
> give benefit of doubt to him and won't argue much here.
> 
> Bhupesh, feel free to include my armv7 based dts patches in your series
> otherwise you might stumble DT checks warnings.

Or do you want me to keep my changes separate? Sorry for spam.

Re: [PATCH v2 6/6] dt-bindings: dma: Convert Qualcomm BAM DMA binding to json format

[Bhupesh Sharma]

On Wed, 20 Apr 2022 at 21:03, Kuldeep Singh <singh.kuldeep87k@gmail.com> wrote:
>
> On Wed, Apr 20, 2022 at 06:59:55PM +0530, Kuldeep Singh wrote:
> > > I appreciate your work Kuldeep, it is important and valuable
> > > contribution. It is sad to see duplicated effort, I don't like it for my
> > > own patches either. In general, I believe the FIFO approach should be
> > > applied, so in this case Bhupesh patches.
> >
> > Yep, I also agree with FIFO approach w.r.t contributions. But one thing
> > daunts me here is the waiting time with latest revision, it's too high.
> >
> > Anyway, Bhupesh had more than BAM changes and was already on v5, I can
> > give benefit of doubt to him and won't argue much here.
> >
> > Bhupesh, feel free to include my armv7 based dts patches in your series
> > otherwise you might stumble DT checks warnings.
>
> Or do you want me to keep my changes separate? Sorry for spam.

Please send your changes separately, as my patchset already exceeds 25
patches or so in the current form.

Thanks,
Bhupesh