From: Michael Walle <michael@walle.cc> To: Lars Povlsen <lars.povlsen@microchip.com>, Steen Hegelund <Steen.Hegelund@microchip.com> Cc: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, UNGLinuxDriver@microchip.com, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Michael Walle <michael@walle.cc> Subject: [PATCH] arm64: dts: sparx5: rename pinctrl nodes Date: Wed, 20 Apr 2022 21:46:00 +0200 [thread overview] Message-ID: <20220420194600.3416282-1-michael@walle.cc> (raw) The pinctrl device tree binding will be converted to YAML format. Rename the pin nodes so they end with "-pins" to match the schema. Signed-off-by: Michael Walle <michael@walle.cc> --- The YAML conversion patch is alread in https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git/log/?h=devel .../dts/microchip/sparx5_pcb134_board.dtsi | 26 +++++++++---------- .../dts/microchip/sparx5_pcb135_board.dtsi | 10 +++---- 2 files changed, 18 insertions(+), 18 deletions(-) diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi index 33faf1f3264f..6f488e774215 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi @@ -325,69 +325,69 @@ &sgpio2 { }; &gpio { - i2cmux_pins_i: i2cmux-pins-i { + i2cmux_pins_i: i2cmux-pins { pins = "GPIO_16", "GPIO_17", "GPIO_18", "GPIO_19", "GPIO_20", "GPIO_22", "GPIO_36", "GPIO_35", "GPIO_50", "GPIO_51", "GPIO_56", "GPIO_57"; function = "twi_scl_m"; output-low; }; - i2cmux_0: i2cmux-0 { + i2cmux_0: i2cmux-0-pins { pins = "GPIO_16"; function = "twi_scl_m"; output-high; }; - i2cmux_1: i2cmux-1 { + i2cmux_1: i2cmux-1-pins { pins = "GPIO_17"; function = "twi_scl_m"; output-high; }; - i2cmux_2: i2cmux-2 { + i2cmux_2: i2cmux-2-pins { pins = "GPIO_18"; function = "twi_scl_m"; output-high; }; - i2cmux_3: i2cmux-3 { + i2cmux_3: i2cmux-3-pins { pins = "GPIO_19"; function = "twi_scl_m"; output-high; }; - i2cmux_4: i2cmux-4 { + i2cmux_4: i2cmux-4-pins { pins = "GPIO_20"; function = "twi_scl_m"; output-high; }; - i2cmux_5: i2cmux-5 { + i2cmux_5: i2cmux-5-pins { pins = "GPIO_22"; function = "twi_scl_m"; output-high; }; - i2cmux_6: i2cmux-6 { + i2cmux_6: i2cmux-6-pins { pins = "GPIO_36"; function = "twi_scl_m"; output-high; }; - i2cmux_7: i2cmux-7 { + i2cmux_7: i2cmux-7-pins { pins = "GPIO_35"; function = "twi_scl_m"; output-high; }; - i2cmux_8: i2cmux-8 { + i2cmux_8: i2cmux-8-pins { pins = "GPIO_50"; function = "twi_scl_m"; output-high; }; - i2cmux_9: i2cmux-9 { + i2cmux_9: i2cmux-9-pins { pins = "GPIO_51"; function = "twi_scl_m"; output-high; }; - i2cmux_10: i2cmux-10 { + i2cmux_10: i2cmux-10-pins { pins = "GPIO_56"; function = "twi_scl_m"; output-high; }; - i2cmux_11: i2cmux-11 { + i2cmux_11: i2cmux-11-pins { pins = "GPIO_57"; function = "twi_scl_m"; output-high; diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi index ef96e6d8c6b3..d9e519bfbf68 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi @@ -59,28 +59,28 @@ led@7 { }; &gpio { - i2cmux_pins_i: i2cmux-pins-i { + i2cmux_pins_i: i2cmux-pins { pins = "GPIO_35", "GPIO_36", "GPIO_50", "GPIO_51"; function = "twi_scl_m"; output-low; }; - i2cmux_s29: i2cmux-0 { + i2cmux_s29: i2cmux-0-pins { pins = "GPIO_35"; function = "twi_scl_m"; output-high; }; - i2cmux_s30: i2cmux-1 { + i2cmux_s30: i2cmux-1-pins { pins = "GPIO_36"; function = "twi_scl_m"; output-high; }; - i2cmux_s31: i2cmux-2 { + i2cmux_s31: i2cmux-2-pins { pins = "GPIO_50"; function = "twi_scl_m"; output-high; }; - i2cmux_s32: i2cmux-3 { + i2cmux_s32: i2cmux-3-pins { pins = "GPIO_51"; function = "twi_scl_m"; output-high; -- 2.30.2
WARNING: multiple messages have this Message-ID (diff)
From: Michael Walle <michael@walle.cc> To: Lars Povlsen <lars.povlsen@microchip.com>, Steen Hegelund <Steen.Hegelund@microchip.com> Cc: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, UNGLinuxDriver@microchip.com, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Michael Walle <michael@walle.cc> Subject: [PATCH] arm64: dts: sparx5: rename pinctrl nodes Date: Wed, 20 Apr 2022 21:46:00 +0200 [thread overview] Message-ID: <20220420194600.3416282-1-michael@walle.cc> (raw) The pinctrl device tree binding will be converted to YAML format. Rename the pin nodes so they end with "-pins" to match the schema. Signed-off-by: Michael Walle <michael@walle.cc> --- The YAML conversion patch is alread in https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git/log/?h=devel .../dts/microchip/sparx5_pcb134_board.dtsi | 26 +++++++++---------- .../dts/microchip/sparx5_pcb135_board.dtsi | 10 +++---- 2 files changed, 18 insertions(+), 18 deletions(-) diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi index 33faf1f3264f..6f488e774215 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi @@ -325,69 +325,69 @@ &sgpio2 { }; &gpio { - i2cmux_pins_i: i2cmux-pins-i { + i2cmux_pins_i: i2cmux-pins { pins = "GPIO_16", "GPIO_17", "GPIO_18", "GPIO_19", "GPIO_20", "GPIO_22", "GPIO_36", "GPIO_35", "GPIO_50", "GPIO_51", "GPIO_56", "GPIO_57"; function = "twi_scl_m"; output-low; }; - i2cmux_0: i2cmux-0 { + i2cmux_0: i2cmux-0-pins { pins = "GPIO_16"; function = "twi_scl_m"; output-high; }; - i2cmux_1: i2cmux-1 { + i2cmux_1: i2cmux-1-pins { pins = "GPIO_17"; function = "twi_scl_m"; output-high; }; - i2cmux_2: i2cmux-2 { + i2cmux_2: i2cmux-2-pins { pins = "GPIO_18"; function = "twi_scl_m"; output-high; }; - i2cmux_3: i2cmux-3 { + i2cmux_3: i2cmux-3-pins { pins = "GPIO_19"; function = "twi_scl_m"; output-high; }; - i2cmux_4: i2cmux-4 { + i2cmux_4: i2cmux-4-pins { pins = "GPIO_20"; function = "twi_scl_m"; output-high; }; - i2cmux_5: i2cmux-5 { + i2cmux_5: i2cmux-5-pins { pins = "GPIO_22"; function = "twi_scl_m"; output-high; }; - i2cmux_6: i2cmux-6 { + i2cmux_6: i2cmux-6-pins { pins = "GPIO_36"; function = "twi_scl_m"; output-high; }; - i2cmux_7: i2cmux-7 { + i2cmux_7: i2cmux-7-pins { pins = "GPIO_35"; function = "twi_scl_m"; output-high; }; - i2cmux_8: i2cmux-8 { + i2cmux_8: i2cmux-8-pins { pins = "GPIO_50"; function = "twi_scl_m"; output-high; }; - i2cmux_9: i2cmux-9 { + i2cmux_9: i2cmux-9-pins { pins = "GPIO_51"; function = "twi_scl_m"; output-high; }; - i2cmux_10: i2cmux-10 { + i2cmux_10: i2cmux-10-pins { pins = "GPIO_56"; function = "twi_scl_m"; output-high; }; - i2cmux_11: i2cmux-11 { + i2cmux_11: i2cmux-11-pins { pins = "GPIO_57"; function = "twi_scl_m"; output-high; diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi index ef96e6d8c6b3..d9e519bfbf68 100644 --- a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi +++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi @@ -59,28 +59,28 @@ led@7 { }; &gpio { - i2cmux_pins_i: i2cmux-pins-i { + i2cmux_pins_i: i2cmux-pins { pins = "GPIO_35", "GPIO_36", "GPIO_50", "GPIO_51"; function = "twi_scl_m"; output-low; }; - i2cmux_s29: i2cmux-0 { + i2cmux_s29: i2cmux-0-pins { pins = "GPIO_35"; function = "twi_scl_m"; output-high; }; - i2cmux_s30: i2cmux-1 { + i2cmux_s30: i2cmux-1-pins { pins = "GPIO_36"; function = "twi_scl_m"; output-high; }; - i2cmux_s31: i2cmux-2 { + i2cmux_s31: i2cmux-2-pins { pins = "GPIO_50"; function = "twi_scl_m"; output-high; }; - i2cmux_s32: i2cmux-3 { + i2cmux_s32: i2cmux-3-pins { pins = "GPIO_51"; function = "twi_scl_m"; output-high; -- 2.30.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-04-20 19:46 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-04-20 19:46 Michael Walle [this message] 2022-04-20 19:46 ` [PATCH] arm64: dts: sparx5: rename pinctrl nodes Michael Walle 2022-08-26 11:17 ` Michael Walle 2022-08-26 11:17 ` Michael Walle 2022-08-26 12:09 ` Michael Walle 2022-08-26 12:09 ` Michael Walle 2023-05-17 12:23 ` Krzysztof Kozlowski 2023-05-17 12:23 ` Krzysztof Kozlowski
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220420194600.3416282-1-michael@walle.cc \ --to=michael@walle.cc \ --cc=Steen.Hegelund@microchip.com \ --cc=UNGLinuxDriver@microchip.com \ --cc=devicetree@vger.kernel.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=lars.povlsen@microchip.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.