[PATCH v5 0/7] typec: mux: Introduce support for multiple USB TypeC muxes

[PATCH v5 0/7] typec: mux: Introduce support for multiple USB TypeC muxes

[Bjorn Andersson]

This series introduces a level of indirection between the controller's view of
a typec_mux/switch and the implementation and then expands that to support
multiple drivers.

This is needed in order to support devices such as the Qualcomm Snapdragon 888
HDK, which does muxing and orientation handling in the QMP (USB+DP) PHY and SBU
muxing in the external FSA4480 chip.

Bjorn Andersson (7):
  device property: Add helper to match multiple connections
  device property: Use multi-connection matchers for single case
  usb: typec: mux: Check dev_set_name() return value
  usb: typec: mux: Introduce indirection
  usb: typec: mux: Allow multiple mux_devs per mux
  dt-bindings: usb: Add binding for fcs,fsa4480
  usb: typec: mux: Add On Semi fsa4480 driver

 .../devicetree/bindings/usb/fcs,fsa4480.yaml  |  72 +++++
 drivers/base/property.c                       |  96 +++++--
 drivers/usb/typec/bus.c                       |   2 +-
 drivers/usb/typec/mux.c                       | 271 +++++++++++++-----
 drivers/usb/typec/mux.h                       |  12 +-
 drivers/usb/typec/mux/Kconfig                 |  10 +
 drivers/usb/typec/mux/Makefile                |   1 +
 drivers/usb/typec/mux/fsa4480.c               | 218 ++++++++++++++
 drivers/usb/typec/mux/intel_pmc_mux.c         |   8 +-
 drivers/usb/typec/mux/pi3usb30532.c           |   8 +-
 include/linux/property.h                      |   5 +
 include/linux/usb/typec_mux.h                 |  22 +-
 12 files changed, 614 insertions(+), 111 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml
 create mode 100644 drivers/usb/typec/mux/fsa4480.c

-- 
2.35.1

[PATCH v5 1/7] device property: Add helper to match multiple connections

[Bjorn Andersson]

In some cases multiple connections with the same connection id
needs to be resolved from a fwnode graph.

One such example is when separate hardware is used for performing muxing
and/or orientation switching of the SuperSpeed and SBU lines in a USB
Type-C connector. In this case the connector needs to belong to a graph
with multiple matching remote endpoints, and the Type-C controller needs
to be able to resolve them both.

Add a new API that allows this kind of lookup.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v4:
- Added "Add" to patch subject
- Added "(Optional)" kernel-doc of fwnode_connection_find_matches()

 drivers/base/property.c  | 109 +++++++++++++++++++++++++++++++++++++++
 include/linux/property.h |   5 ++
 2 files changed, 114 insertions(+)

diff --git a/drivers/base/property.c b/drivers/base/property.c
index 36401cfe432c..babab8cec7a0 100644
--- a/drivers/base/property.c
+++ b/drivers/base/property.c
@@ -1201,6 +1201,40 @@ fwnode_graph_devcon_match(struct fwnode_handle *fwnode, const char *con_id,
 	return NULL;
 }
 
+static unsigned int fwnode_graph_devcon_matches(struct fwnode_handle *fwnode,
+						const char *con_id, void *data,
+						devcon_match_fn_t match,
+						void **matches,
+						unsigned int matches_len)
+{
+	struct fwnode_handle *node;
+	struct fwnode_handle *ep;
+	unsigned int count = 0;
+	void *ret;
+
+	fwnode_graph_for_each_endpoint(fwnode, ep) {
+		if (matches && count >= matches_len) {
+			fwnode_handle_put(ep);
+			break;
+		}
+
+		node = fwnode_graph_get_remote_port_parent(ep);
+		if (!fwnode_device_is_available(node)) {
+			fwnode_handle_put(node);
+			continue;
+		}
+
+		ret = match(node, con_id, data);
+		fwnode_handle_put(node);
+		if (ret) {
+			if (matches)
+				matches[count] = ret;
+			count++;
+		}
+	}
+	return count;
+}
+
 static void *
 fwnode_devcon_match(struct fwnode_handle *fwnode, const char *con_id,
 		    void *data, devcon_match_fn_t match)
@@ -1223,6 +1257,37 @@ fwnode_devcon_match(struct fwnode_handle *fwnode, const char *con_id,
 	return NULL;
 }
 
+static unsigned int fwnode_devcon_matches(struct fwnode_handle *fwnode,
+					  const char *con_id, void *data,
+					  devcon_match_fn_t match,
+					  void **matches,
+					  unsigned int matches_len)
+{
+	struct fwnode_handle *node;
+	unsigned int count = 0;
+	unsigned int i;
+	void *ret;
+
+	for (i = 0; ; i++) {
+		if (matches && count >= matches_len)
+			break;
+
+		node = fwnode_find_reference(fwnode, con_id, i);
+		if (IS_ERR(node))
+			break;
+
+		ret = match(node, NULL, data);
+		fwnode_handle_put(node);
+		if (ret) {
+			if (matches)
+				matches[count] = ret;
+			count++;
+		}
+	}
+
+	return count;
+}
+
 /**
  * fwnode_connection_find_match - Find connection from a device node
  * @fwnode: Device node with the connection
@@ -1250,3 +1315,47 @@ void *fwnode_connection_find_match(struct fwnode_handle *fwnode,
 	return fwnode_devcon_match(fwnode, con_id, data, match);
 }
 EXPORT_SYMBOL_GPL(fwnode_connection_find_match);
+
+/**
+ * fwnode_connection_find_matches - Find connections from a device node
+ * @fwnode: Device node with the connection
+ * @con_id: Identifier for the connection
+ * @data: Data for the match function
+ * @match: Function to check and convert the connection description
+ * @matches: (Optional) array of pointers to fill with matches
+ * @matches_len: Length of @matches
+ *
+ * Find up to @matches_len connections with unique identifier @con_id between
+ * @fwnode and other device nodes. @match will be used to convert the
+ * connection description to data the caller is expecting to be returned
+ * through the @matches array.
+ * If @matches is NULL @matches_len is ignored and the total number of resolved
+ * matches is returned.
+ *
+ * Return: Number of matches resolved, or negative errno.
+ */
+int fwnode_connection_find_matches(struct fwnode_handle *fwnode,
+				   const char *con_id, void *data,
+				   devcon_match_fn_t match,
+				   void **matches, unsigned int matches_len)
+{
+	unsigned int count_graph;
+	unsigned int count_ref;
+
+	if (!fwnode || !match)
+		return -EINVAL;
+
+	count_graph = fwnode_graph_devcon_matches(fwnode, con_id, data, match,
+						  matches, matches_len);
+
+	if (matches) {
+		matches += count_graph;
+		matches_len -= count_graph;
+	}
+
+	count_ref = fwnode_devcon_matches(fwnode, con_id, data, match,
+					  matches, matches_len);
+
+	return count_graph + count_ref;
+}
+EXPORT_SYMBOL_GPL(fwnode_connection_find_matches);
diff --git a/include/linux/property.h b/include/linux/property.h
index fc24d45632eb..a5b429d623f6 100644
--- a/include/linux/property.h
+++ b/include/linux/property.h
@@ -451,6 +451,11 @@ static inline void *device_connection_find_match(struct device *dev,
 	return fwnode_connection_find_match(dev_fwnode(dev), con_id, data, match);
 }
 
+int fwnode_connection_find_matches(struct fwnode_handle *fwnode,
+				   const char *con_id, void *data,
+				   devcon_match_fn_t match,
+				   void **matches, unsigned int matches_len);
+
 /* -------------------------------------------------------------------------- */
 /* Software fwnode support - when HW description is incomplete or missing */
 
-- 
2.35.1

[PATCH v5 2/7] device property: Use multi-connection matchers for single case

[Bjorn Andersson]

The newly introduced helpers for searching for matches in the case of
multiple connections can be resused by the single-connection case, so do
this to save some duplication.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v4:
- None

 drivers/base/property.c | 55 ++++-------------------------------------
 1 file changed, 5 insertions(+), 50 deletions(-)

diff --git a/drivers/base/property.c b/drivers/base/property.c
index babab8cec7a0..337c95fea217 100644
--- a/drivers/base/property.c
+++ b/drivers/base/property.c
@@ -1176,31 +1176,6 @@ const void *device_get_match_data(struct device *dev)
 }
 EXPORT_SYMBOL_GPL(device_get_match_data);
 
-static void *
-fwnode_graph_devcon_match(struct fwnode_handle *fwnode, const char *con_id,
-			  void *data, devcon_match_fn_t match)
-{
-	struct fwnode_handle *node;
-	struct fwnode_handle *ep;
-	void *ret;
-
-	fwnode_graph_for_each_endpoint(fwnode, ep) {
-		node = fwnode_graph_get_remote_port_parent(ep);
-		if (!fwnode_device_is_available(node)) {
-			fwnode_handle_put(node);
-			continue;
-		}
-
-		ret = match(node, con_id, data);
-		fwnode_handle_put(node);
-		if (ret) {
-			fwnode_handle_put(ep);
-			return ret;
-		}
-	}
-	return NULL;
-}
-
 static unsigned int fwnode_graph_devcon_matches(struct fwnode_handle *fwnode,
 						const char *con_id, void *data,
 						devcon_match_fn_t match,
@@ -1235,28 +1210,6 @@ static unsigned int fwnode_graph_devcon_matches(struct fwnode_handle *fwnode,
 	return count;
 }
 
-static void *
-fwnode_devcon_match(struct fwnode_handle *fwnode, const char *con_id,
-		    void *data, devcon_match_fn_t match)
-{
-	struct fwnode_handle *node;
-	void *ret;
-	int i;
-
-	for (i = 0; ; i++) {
-		node = fwnode_find_reference(fwnode, con_id, i);
-		if (IS_ERR(node))
-			break;
-
-		ret = match(node, NULL, data);
-		fwnode_handle_put(node);
-		if (ret)
-			return ret;
-	}
-
-	return NULL;
-}
-
 static unsigned int fwnode_devcon_matches(struct fwnode_handle *fwnode,
 					  const char *con_id, void *data,
 					  devcon_match_fn_t match,
@@ -1303,16 +1256,18 @@ void *fwnode_connection_find_match(struct fwnode_handle *fwnode,
 				   const char *con_id, void *data,
 				   devcon_match_fn_t match)
 {
+	unsigned int count;
 	void *ret;
 
 	if (!fwnode || !match)
 		return NULL;
 
-	ret = fwnode_graph_devcon_match(fwnode, con_id, data, match);
-	if (ret)
+	count = fwnode_graph_devcon_matches(fwnode, con_id, data, match, &ret, 1);
+	if (count)
 		return ret;
 
-	return fwnode_devcon_match(fwnode, con_id, data, match);
+	count = fwnode_devcon_matches(fwnode, con_id, data, match, &ret, 1);
+	return count ? ret : NULL;
 }
 EXPORT_SYMBOL_GPL(fwnode_connection_find_match);
 
-- 
2.35.1

[PATCH v5 3/7] usb: typec: mux: Check dev_set_name() return value

[Bjorn Andersson]

It's possible that dev_set_name() returns -ENOMEM, catch and handle this.

Fixes: 3370db35193b ("usb: typec: Registering real device entries for the muxes")
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v4:
- Added Fixes tag

 drivers/usb/typec/mux.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/typec/mux.c b/drivers/usb/typec/mux.c
index c8340de0ed49..d2aaf294b649 100644
--- a/drivers/usb/typec/mux.c
+++ b/drivers/usb/typec/mux.c
@@ -131,8 +131,11 @@ typec_switch_register(struct device *parent,
 	sw->dev.class = &typec_mux_class;
 	sw->dev.type = &typec_switch_dev_type;
 	sw->dev.driver_data = desc->drvdata;
-	dev_set_name(&sw->dev, "%s-switch",
-		     desc->name ? desc->name : dev_name(parent));
+	ret = dev_set_name(&sw->dev, "%s-switch", desc->name ? desc->name : dev_name(parent));
+	if (ret) {
+		put_device(&sw->dev);
+		return ERR_PTR(ret);
+	}
 
 	ret = device_add(&sw->dev);
 	if (ret) {
@@ -338,8 +341,11 @@ typec_mux_register(struct device *parent, const struct typec_mux_desc *desc)
 	mux->dev.class = &typec_mux_class;
 	mux->dev.type = &typec_mux_dev_type;
 	mux->dev.driver_data = desc->drvdata;
-	dev_set_name(&mux->dev, "%s-mux",
-		     desc->name ? desc->name : dev_name(parent));
+	ret = dev_set_name(&mux->dev, "%s-mux", desc->name ? desc->name : dev_name(parent));
+	if (ret) {
+		put_device(&mux->dev);
+		return ERR_PTR(ret);
+	}
 
 	ret = device_add(&mux->dev);
 	if (ret) {
-- 
2.35.1

[PATCH v5 4/7] usb: typec: mux: Introduce indirection

[Bjorn Andersson]

Rather than directly exposing the implementation's representation of the
typec muxes to the controller/clients, introduce an indirection object.

This enables the introduction of turning this relationship into a
one-to-many in the following patch.

Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v4:
- None

 drivers/usb/typec/bus.c               |   2 +-
 drivers/usb/typec/mux.c               | 193 ++++++++++++++++----------
 drivers/usb/typec/mux.h               |  12 +-
 drivers/usb/typec/mux/intel_pmc_mux.c |   8 +-
 drivers/usb/typec/mux/pi3usb30532.c   |   8 +-
 include/linux/usb/typec_mux.h         |  22 +--
 6 files changed, 148 insertions(+), 97 deletions(-)

diff --git a/drivers/usb/typec/bus.c b/drivers/usb/typec/bus.c
index 78e0e78954f2..26ea2fdec17d 100644
--- a/drivers/usb/typec/bus.c
+++ b/drivers/usb/typec/bus.c
@@ -24,7 +24,7 @@ typec_altmode_set_mux(struct altmode *alt, unsigned long conf, void *data)
 	state.mode = conf;
 	state.data = data;
 
-	return alt->mux->set(alt->mux, &state);
+	return typec_mux_set(alt->mux, &state);
 }
 
 static int typec_altmode_set_state(struct typec_altmode *adev,
diff --git a/drivers/usb/typec/mux.c b/drivers/usb/typec/mux.c
index d2aaf294b649..bb6c095b4af9 100644
--- a/drivers/usb/typec/mux.c
+++ b/drivers/usb/typec/mux.c
@@ -17,9 +17,13 @@
 #include "class.h"
 #include "mux.h"
 
+struct typec_switch {
+	struct typec_switch_dev *sw_dev;
+};
+
 static int switch_fwnode_match(struct device *dev, const void *fwnode)
 {
-	if (!is_typec_switch(dev))
+	if (!is_typec_switch_dev(dev))
 		return 0;
 
 	return dev_fwnode(dev) == fwnode;
@@ -49,7 +53,7 @@ static void *typec_switch_match(struct fwnode_handle *fwnode, const char *id,
 	dev = class_find_device(&typec_mux_class, NULL, fwnode,
 				switch_fwnode_match);
 
-	return dev ? to_typec_switch(dev) : ERR_PTR(-EPROBE_DEFER);
+	return dev ? to_typec_switch_dev(dev) : ERR_PTR(-EPROBE_DEFER);
 }
 
 /**
@@ -63,12 +67,23 @@ static void *typec_switch_match(struct fwnode_handle *fwnode, const char *id,
  */
 struct typec_switch *fwnode_typec_switch_get(struct fwnode_handle *fwnode)
 {
+	struct typec_switch_dev *sw_dev;
 	struct typec_switch *sw;
 
-	sw = fwnode_connection_find_match(fwnode, "orientation-switch", NULL,
-					  typec_switch_match);
-	if (!IS_ERR_OR_NULL(sw))
-		WARN_ON(!try_module_get(sw->dev.parent->driver->owner));
+	sw = kzalloc(sizeof(*sw), GFP_KERNEL);
+	if (!sw)
+		return ERR_PTR(-ENOMEM);
+
+	sw_dev = fwnode_connection_find_match(fwnode, "orientation-switch", NULL,
+					      typec_switch_match);
+	if (IS_ERR_OR_NULL(sw_dev)) {
+		kfree(sw);
+		return ERR_CAST(sw_dev);
+	}
+
+	WARN_ON(!try_module_get(sw_dev->dev.parent->driver->owner));
+
+	sw->sw_dev = sw_dev;
 
 	return sw;
 }
@@ -82,16 +97,22 @@ EXPORT_SYMBOL_GPL(fwnode_typec_switch_get);
  */
 void typec_switch_put(struct typec_switch *sw)
 {
-	if (!IS_ERR_OR_NULL(sw)) {
-		module_put(sw->dev.parent->driver->owner);
-		put_device(&sw->dev);
-	}
+	struct typec_switch_dev *sw_dev;
+
+	if (IS_ERR_OR_NULL(sw))
+		return;
+
+	sw_dev = sw->sw_dev;
+
+	module_put(sw_dev->dev.parent->driver->owner);
+	put_device(&sw_dev->dev);
+	kfree(sw);
 }
 EXPORT_SYMBOL_GPL(typec_switch_put);
 
 static void typec_switch_release(struct device *dev)
 {
-	kfree(to_typec_switch(dev));
+	kfree(to_typec_switch_dev(dev));
 }
 
 const struct device_type typec_switch_dev_type = {
@@ -109,85 +130,93 @@ const struct device_type typec_switch_dev_type = {
  * connector to the USB controllers. USB Type-C plugs can be inserted
  * right-side-up or upside-down.
  */
-struct typec_switch *
+struct typec_switch_dev *
 typec_switch_register(struct device *parent,
 		      const struct typec_switch_desc *desc)
 {
-	struct typec_switch *sw;
+	struct typec_switch_dev *sw_dev;
 	int ret;
 
 	if (!desc || !desc->set)
 		return ERR_PTR(-EINVAL);
 
-	sw = kzalloc(sizeof(*sw), GFP_KERNEL);
-	if (!sw)
+	sw_dev = kzalloc(sizeof(*sw_dev), GFP_KERNEL);
+	if (!sw_dev)
 		return ERR_PTR(-ENOMEM);
 
-	sw->set = desc->set;
+	sw_dev->set = desc->set;
 
-	device_initialize(&sw->dev);
-	sw->dev.parent = parent;
-	sw->dev.fwnode = desc->fwnode;
-	sw->dev.class = &typec_mux_class;
-	sw->dev.type = &typec_switch_dev_type;
-	sw->dev.driver_data = desc->drvdata;
-	ret = dev_set_name(&sw->dev, "%s-switch", desc->name ? desc->name : dev_name(parent));
+	device_initialize(&sw_dev->dev);
+	sw_dev->dev.parent = parent;
+	sw_dev->dev.fwnode = desc->fwnode;
+	sw_dev->dev.class = &typec_mux_class;
+	sw_dev->dev.type = &typec_switch_dev_type;
+	sw_dev->dev.driver_data = desc->drvdata;
+	ret = dev_set_name(&sw_dev->dev, "%s-switch", desc->name ? desc->name : dev_name(parent));
 	if (ret) {
-		put_device(&sw->dev);
+		put_device(&sw_dev->dev);
 		return ERR_PTR(ret);
 	}
 
-	ret = device_add(&sw->dev);
+	ret = device_add(&sw_dev->dev);
 	if (ret) {
 		dev_err(parent, "failed to register switch (%d)\n", ret);
-		put_device(&sw->dev);
+		put_device(&sw_dev->dev);
 		return ERR_PTR(ret);
 	}
 
-	return sw;
+	return sw_dev;
 }
 EXPORT_SYMBOL_GPL(typec_switch_register);
 
 int typec_switch_set(struct typec_switch *sw,
 		     enum typec_orientation orientation)
 {
+	struct typec_switch_dev *sw_dev;
+
 	if (IS_ERR_OR_NULL(sw))
 		return 0;
 
-	return sw->set(sw, orientation);
+	sw_dev = sw->sw_dev;
+
+	return sw_dev->set(sw_dev, orientation);
 }
 EXPORT_SYMBOL_GPL(typec_switch_set);
 
 /**
  * typec_switch_unregister - Unregister USB Type-C orientation switch
- * @sw: USB Type-C orientation switch
+ * @sw_dev: USB Type-C orientation switch
  *
  * Unregister switch that was registered with typec_switch_register().
  */
-void typec_switch_unregister(struct typec_switch *sw)
+void typec_switch_unregister(struct typec_switch_dev *sw_dev)
 {
-	if (!IS_ERR_OR_NULL(sw))
-		device_unregister(&sw->dev);
+	if (!IS_ERR_OR_NULL(sw_dev))
+		device_unregister(&sw_dev->dev);
 }
 EXPORT_SYMBOL_GPL(typec_switch_unregister);
 
-void typec_switch_set_drvdata(struct typec_switch *sw, void *data)
+void typec_switch_set_drvdata(struct typec_switch_dev *sw_dev, void *data)
 {
-	dev_set_drvdata(&sw->dev, data);
+	dev_set_drvdata(&sw_dev->dev, data);
 }
 EXPORT_SYMBOL_GPL(typec_switch_set_drvdata);
 
-void *typec_switch_get_drvdata(struct typec_switch *sw)
+void *typec_switch_get_drvdata(struct typec_switch_dev *sw_dev)
 {
-	return dev_get_drvdata(&sw->dev);
+	return dev_get_drvdata(&sw_dev->dev);
 }
 EXPORT_SYMBOL_GPL(typec_switch_get_drvdata);
 
 /* ------------------------------------------------------------------------- */
 
+struct typec_mux {
+	struct typec_mux_dev *mux_dev;
+};
+
 static int mux_fwnode_match(struct device *dev, const void *fwnode)
 {
-	if (!is_typec_mux(dev))
+	if (!is_typec_mux_dev(dev))
 		return 0;
 
 	return dev_fwnode(dev) == fwnode;
@@ -249,7 +278,7 @@ static void *typec_mux_match(struct fwnode_handle *fwnode, const char *id,
 	dev = class_find_device(&typec_mux_class, NULL, fwnode,
 				mux_fwnode_match);
 
-	return dev ? to_typec_mux(dev) : ERR_PTR(-EPROBE_DEFER);
+	return dev ? to_typec_mux_dev(dev) : ERR_PTR(-EPROBE_DEFER);
 }
 
 /**
@@ -265,12 +294,23 @@ static void *typec_mux_match(struct fwnode_handle *fwnode, const char *id,
 struct typec_mux *fwnode_typec_mux_get(struct fwnode_handle *fwnode,
 				       const struct typec_altmode_desc *desc)
 {
+	struct typec_mux_dev *mux_dev;
 	struct typec_mux *mux;
 
-	mux = fwnode_connection_find_match(fwnode, "mode-switch", (void *)desc,
-					   typec_mux_match);
-	if (!IS_ERR_OR_NULL(mux))
-		WARN_ON(!try_module_get(mux->dev.parent->driver->owner));
+	mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+	if (!mux)
+		return ERR_PTR(-ENOMEM);
+
+	mux_dev = fwnode_connection_find_match(fwnode, "mode-switch", (void *)desc,
+					       typec_mux_match);
+	if (IS_ERR_OR_NULL(mux_dev)) {
+		kfree(mux);
+		return ERR_CAST(mux_dev);
+	}
+
+	WARN_ON(!try_module_get(mux_dev->dev.parent->driver->owner));
+
+	mux->mux_dev = mux_dev;
 
 	return mux;
 }
@@ -284,25 +324,34 @@ EXPORT_SYMBOL_GPL(fwnode_typec_mux_get);
  */
 void typec_mux_put(struct typec_mux *mux)
 {
-	if (!IS_ERR_OR_NULL(mux)) {
-		module_put(mux->dev.parent->driver->owner);
-		put_device(&mux->dev);
-	}
+	struct typec_mux_dev *mux_dev;
+
+	if (IS_ERR_OR_NULL(mux))
+		return;
+
+	mux_dev = mux->mux_dev;
+	module_put(mux_dev->dev.parent->driver->owner);
+	put_device(&mux_dev->dev);
+	kfree(mux);
 }
 EXPORT_SYMBOL_GPL(typec_mux_put);
 
 int typec_mux_set(struct typec_mux *mux, struct typec_mux_state *state)
 {
+	struct typec_mux_dev *mux_dev;
+
 	if (IS_ERR_OR_NULL(mux))
 		return 0;
 
-	return mux->set(mux, state);
+	mux_dev = mux->mux_dev;
+
+	return mux_dev->set(mux_dev, state);
 }
 EXPORT_SYMBOL_GPL(typec_mux_set);
 
 static void typec_mux_release(struct device *dev)
 {
-	kfree(to_typec_mux(dev));
+	kfree(to_typec_mux_dev(dev));
 }
 
 const struct device_type typec_mux_dev_type = {
@@ -320,66 +369,66 @@ const struct device_type typec_mux_dev_type = {
  * the pins on the connector need to be reconfigured. This function registers
  * multiplexer switches routing the pins on the connector.
  */
-struct typec_mux *
+struct typec_mux_dev *
 typec_mux_register(struct device *parent, const struct typec_mux_desc *desc)
 {
-	struct typec_mux *mux;
+	struct typec_mux_dev *mux_dev;
 	int ret;
 
 	if (!desc || !desc->set)
 		return ERR_PTR(-EINVAL);
 
-	mux = kzalloc(sizeof(*mux), GFP_KERNEL);
-	if (!mux)
+	mux_dev = kzalloc(sizeof(*mux_dev), GFP_KERNEL);
+	if (!mux_dev)
 		return ERR_PTR(-ENOMEM);
 
-	mux->set = desc->set;
+	mux_dev->set = desc->set;
 
-	device_initialize(&mux->dev);
-	mux->dev.parent = parent;
-	mux->dev.fwnode = desc->fwnode;
-	mux->dev.class = &typec_mux_class;
-	mux->dev.type = &typec_mux_dev_type;
-	mux->dev.driver_data = desc->drvdata;
-	ret = dev_set_name(&mux->dev, "%s-mux", desc->name ? desc->name : dev_name(parent));
+	device_initialize(&mux_dev->dev);
+	mux_dev->dev.parent = parent;
+	mux_dev->dev.fwnode = desc->fwnode;
+	mux_dev->dev.class = &typec_mux_class;
+	mux_dev->dev.type = &typec_mux_dev_type;
+	mux_dev->dev.driver_data = desc->drvdata;
+	ret = dev_set_name(&mux_dev->dev, "%s-mux", desc->name ? desc->name : dev_name(parent));
 	if (ret) {
-		put_device(&mux->dev);
+		put_device(&mux_dev->dev);
 		return ERR_PTR(ret);
 	}
 
-	ret = device_add(&mux->dev);
+	ret = device_add(&mux_dev->dev);
 	if (ret) {
 		dev_err(parent, "failed to register mux (%d)\n", ret);
-		put_device(&mux->dev);
+		put_device(&mux_dev->dev);
 		return ERR_PTR(ret);
 	}
 
-	return mux;
+	return mux_dev;
 }
 EXPORT_SYMBOL_GPL(typec_mux_register);
 
 /**
  * typec_mux_unregister - Unregister Multiplexer Switch
- * @mux: USB Type-C Connector Multiplexer/DeMultiplexer
+ * @mux_dev: USB Type-C Connector Multiplexer/DeMultiplexer
  *
  * Unregister mux that was registered with typec_mux_register().
  */
-void typec_mux_unregister(struct typec_mux *mux)
+void typec_mux_unregister(struct typec_mux_dev *mux_dev)
 {
-	if (!IS_ERR_OR_NULL(mux))
-		device_unregister(&mux->dev);
+	if (!IS_ERR_OR_NULL(mux_dev))
+		device_unregister(&mux_dev->dev);
 }
 EXPORT_SYMBOL_GPL(typec_mux_unregister);
 
-void typec_mux_set_drvdata(struct typec_mux *mux, void *data)
+void typec_mux_set_drvdata(struct typec_mux_dev *mux_dev, void *data)
 {
-	dev_set_drvdata(&mux->dev, data);
+	dev_set_drvdata(&mux_dev->dev, data);
 }
 EXPORT_SYMBOL_GPL(typec_mux_set_drvdata);
 
-void *typec_mux_get_drvdata(struct typec_mux *mux)
+void *typec_mux_get_drvdata(struct typec_mux_dev *mux_dev)
 {
-	return dev_get_drvdata(&mux->dev);
+	return dev_get_drvdata(&mux_dev->dev);
 }
 EXPORT_SYMBOL_GPL(typec_mux_get_drvdata);
 
diff --git a/drivers/usb/typec/mux.h b/drivers/usb/typec/mux.h
index b1d6e837cb74..58f0f28b6dc8 100644
--- a/drivers/usb/typec/mux.h
+++ b/drivers/usb/typec/mux.h
@@ -5,23 +5,23 @@
 
 #include <linux/usb/typec_mux.h>
 
-struct typec_switch {
+struct typec_switch_dev {
 	struct device dev;
 	typec_switch_set_fn_t set;
 };
 
-struct typec_mux {
+struct typec_mux_dev {
 	struct device dev;
 	typec_mux_set_fn_t set;
 };
 
-#define to_typec_switch(_dev_) container_of(_dev_, struct typec_switch, dev)
-#define to_typec_mux(_dev_) container_of(_dev_, struct typec_mux, dev)
+#define to_typec_switch_dev(_dev_) container_of(_dev_, struct typec_switch_dev, dev)
+#define to_typec_mux_dev(_dev_) container_of(_dev_, struct typec_mux_dev, dev)
 
 extern const struct device_type typec_switch_dev_type;
 extern const struct device_type typec_mux_dev_type;
 
-#define is_typec_switch(dev) ((dev)->type == &typec_switch_dev_type)
-#define is_typec_mux(dev) ((dev)->type == &typec_mux_dev_type)
+#define is_typec_switch_dev(dev) ((dev)->type == &typec_switch_dev_type)
+#define is_typec_mux_dev(dev) ((dev)->type == &typec_mux_dev_type)
 
 #endif /* __USB_TYPEC_MUX__ */
diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c
index 2cdd22130834..51d8f3b88128 100644
--- a/drivers/usb/typec/mux/intel_pmc_mux.c
+++ b/drivers/usb/typec/mux/intel_pmc_mux.c
@@ -121,8 +121,8 @@ struct pmc_usb_port {
 	int num;
 	u32 iom_status;
 	struct pmc_usb *pmc;
-	struct typec_mux *typec_mux;
-	struct typec_switch *typec_sw;
+	struct typec_mux_dev *typec_mux;
+	struct typec_switch_dev *typec_sw;
 	struct usb_role_switch *usb_sw;
 
 	enum typec_orientation orientation;
@@ -416,7 +416,7 @@ static int pmc_usb_connect(struct pmc_usb_port *port, enum usb_role role)
 }
 
 static int
-pmc_usb_mux_set(struct typec_mux *mux, struct typec_mux_state *state)
+pmc_usb_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *state)
 {
 	struct pmc_usb_port *port = typec_mux_get_drvdata(mux);
 
@@ -452,7 +452,7 @@ pmc_usb_mux_set(struct typec_mux *mux, struct typec_mux_state *state)
 	return -EOPNOTSUPP;
 }
 
-static int pmc_usb_set_orientation(struct typec_switch *sw,
+static int pmc_usb_set_orientation(struct typec_switch_dev *sw,
 				   enum typec_orientation orientation)
 {
 	struct pmc_usb_port *port = typec_switch_get_drvdata(sw);
diff --git a/drivers/usb/typec/mux/pi3usb30532.c b/drivers/usb/typec/mux/pi3usb30532.c
index 7afe275b17d0..6ce9f282594e 100644
--- a/drivers/usb/typec/mux/pi3usb30532.c
+++ b/drivers/usb/typec/mux/pi3usb30532.c
@@ -23,8 +23,8 @@
 struct pi3usb30532 {
 	struct i2c_client *client;
 	struct mutex lock; /* protects the cached conf register */
-	struct typec_switch *sw;
-	struct typec_mux *mux;
+	struct typec_switch_dev *sw;
+	struct typec_mux_dev *mux;
 	u8 conf;
 };
 
@@ -45,7 +45,7 @@ static int pi3usb30532_set_conf(struct pi3usb30532 *pi, u8 new_conf)
 	return 0;
 }
 
-static int pi3usb30532_sw_set(struct typec_switch *sw,
+static int pi3usb30532_sw_set(struct typec_switch_dev *sw,
 			      enum typec_orientation orientation)
 {
 	struct pi3usb30532 *pi = typec_switch_get_drvdata(sw);
@@ -74,7 +74,7 @@ static int pi3usb30532_sw_set(struct typec_switch *sw,
 }
 
 static int
-pi3usb30532_mux_set(struct typec_mux *mux, struct typec_mux_state *state)
+pi3usb30532_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *state)
 {
 	struct pi3usb30532 *pi = typec_mux_get_drvdata(mux);
 	u8 new_conf;
diff --git a/include/linux/usb/typec_mux.h b/include/linux/usb/typec_mux.h
index a9d9957933dc..ee57781dcf28 100644
--- a/include/linux/usb/typec_mux.h
+++ b/include/linux/usb/typec_mux.h
@@ -8,11 +8,13 @@
 
 struct device;
 struct typec_mux;
+struct typec_mux_dev;
 struct typec_switch;
+struct typec_switch_dev;
 struct typec_altmode;
 struct fwnode_handle;
 
-typedef int (*typec_switch_set_fn_t)(struct typec_switch *sw,
+typedef int (*typec_switch_set_fn_t)(struct typec_switch_dev *sw,
 				     enum typec_orientation orientation);
 
 struct typec_switch_desc {
@@ -32,13 +34,13 @@ static inline struct typec_switch *typec_switch_get(struct device *dev)
 	return fwnode_typec_switch_get(dev_fwnode(dev));
 }
 
-struct typec_switch *
+struct typec_switch_dev *
 typec_switch_register(struct device *parent,
 		      const struct typec_switch_desc *desc);
-void typec_switch_unregister(struct typec_switch *sw);
+void typec_switch_unregister(struct typec_switch_dev *sw);
 
-void typec_switch_set_drvdata(struct typec_switch *sw, void *data);
-void *typec_switch_get_drvdata(struct typec_switch *sw);
+void typec_switch_set_drvdata(struct typec_switch_dev *sw, void *data);
+void *typec_switch_get_drvdata(struct typec_switch_dev *sw);
 
 struct typec_mux_state {
 	struct typec_altmode *alt;
@@ -46,7 +48,7 @@ struct typec_mux_state {
 	void *data;
 };
 
-typedef int (*typec_mux_set_fn_t)(struct typec_mux *mux,
+typedef int (*typec_mux_set_fn_t)(struct typec_mux_dev *mux,
 				  struct typec_mux_state *state);
 
 struct typec_mux_desc {
@@ -67,11 +69,11 @@ typec_mux_get(struct device *dev, const struct typec_altmode_desc *desc)
 	return fwnode_typec_mux_get(dev_fwnode(dev), desc);
 }
 
-struct typec_mux *
+struct typec_mux_dev *
 typec_mux_register(struct device *parent, const struct typec_mux_desc *desc);
-void typec_mux_unregister(struct typec_mux *mux);
+void typec_mux_unregister(struct typec_mux_dev *mux);
 
-void typec_mux_set_drvdata(struct typec_mux *mux, void *data);
-void *typec_mux_get_drvdata(struct typec_mux *mux);
+void typec_mux_set_drvdata(struct typec_mux_dev *mux, void *data);
+void *typec_mux_get_drvdata(struct typec_mux_dev *mux);
 
 #endif /* __USB_TYPEC_MUX */
-- 
2.35.1

[PATCH v5 5/7] usb: typec: mux: Allow multiple mux_devs per mux

[Bjorn Andersson]

In the Qualcomm platforms the USB/DP PHY handles muxing and orientation
switching of the SuperSpeed lines, but the SBU lines needs to be
connected and switched by external (to the SoC) hardware.

It's therefor necessary to be able to have the TypeC controller operate
multiple TypeC muxes and switches. Use the newly introduced indirection
object to handle this, to avoid having to taint the TypeC controllers
with knowledge about the downstream hardware configuration.

The max number of devs per indirection is set to 3, which account for
being able to mux/switch the USB HS, SS and SBU lines, as per defined
defined in the usb-c-connector binding. This number could be grown if
need arrises at a later point in time.

Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v4:
- None

 drivers/usb/typec/mux.c | 128 ++++++++++++++++++++++++++++++++--------
 1 file changed, 102 insertions(+), 26 deletions(-)

diff --git a/drivers/usb/typec/mux.c b/drivers/usb/typec/mux.c
index bb6c095b4af9..fd55c2c516a5 100644
--- a/drivers/usb/typec/mux.c
+++ b/drivers/usb/typec/mux.c
@@ -17,8 +17,11 @@
 #include "class.h"
 #include "mux.h"
 
+#define TYPEC_MUX_MAX_DEVS	3
+
 struct typec_switch {
-	struct typec_switch_dev *sw_dev;
+	struct typec_switch_dev *sw_devs[TYPEC_MUX_MAX_DEVS];
+	unsigned int num_sw_devs;
 };
 
 static int switch_fwnode_match(struct device *dev, const void *fwnode)
@@ -67,25 +70,50 @@ static void *typec_switch_match(struct fwnode_handle *fwnode, const char *id,
  */
 struct typec_switch *fwnode_typec_switch_get(struct fwnode_handle *fwnode)
 {
-	struct typec_switch_dev *sw_dev;
+	struct typec_switch_dev *sw_devs[TYPEC_MUX_MAX_DEVS];
 	struct typec_switch *sw;
+	int count;
+	int err;
+	int i;
 
 	sw = kzalloc(sizeof(*sw), GFP_KERNEL);
 	if (!sw)
 		return ERR_PTR(-ENOMEM);
 
-	sw_dev = fwnode_connection_find_match(fwnode, "orientation-switch", NULL,
-					      typec_switch_match);
-	if (IS_ERR_OR_NULL(sw_dev)) {
+	count = fwnode_connection_find_matches(fwnode, "orientation-switch", NULL,
+					       typec_switch_match,
+					       (void **)sw_devs,
+					       ARRAY_SIZE(sw_devs));
+	if (count <= 0) {
 		kfree(sw);
-		return ERR_CAST(sw_dev);
+		return NULL;
 	}
 
-	WARN_ON(!try_module_get(sw_dev->dev.parent->driver->owner));
+	for (i = 0; i < count; i++) {
+		if (IS_ERR(sw_devs[i])) {
+			err = PTR_ERR(sw_devs[i]);
+			goto put_sw_devs;
+		}
+	}
 
-	sw->sw_dev = sw_dev;
+	for (i = 0; i < count; i++) {
+		WARN_ON(!try_module_get(sw_devs[i]->dev.parent->driver->owner));
+		sw->sw_devs[i] = sw_devs[i];
+	}
+
+	sw->num_sw_devs = count;
 
 	return sw;
+
+put_sw_devs:
+	for (i = 0; i < count; i++) {
+		if (!IS_ERR(sw_devs[i]))
+			put_device(&sw_devs[i]->dev);
+	}
+
+	kfree(sw);
+
+	return ERR_PTR(err);
 }
 EXPORT_SYMBOL_GPL(fwnode_typec_switch_get);
 
@@ -98,14 +126,17 @@ EXPORT_SYMBOL_GPL(fwnode_typec_switch_get);
 void typec_switch_put(struct typec_switch *sw)
 {
 	struct typec_switch_dev *sw_dev;
+	unsigned int i;
 
 	if (IS_ERR_OR_NULL(sw))
 		return;
 
-	sw_dev = sw->sw_dev;
+	for (i = 0; i < sw->num_sw_devs; i++) {
+		sw_dev = sw->sw_devs[i];
 
-	module_put(sw_dev->dev.parent->driver->owner);
-	put_device(&sw_dev->dev);
+		module_put(sw_dev->dev.parent->driver->owner);
+		put_device(&sw_dev->dev);
+	}
 	kfree(sw);
 }
 EXPORT_SYMBOL_GPL(typec_switch_put);
@@ -173,13 +204,21 @@ int typec_switch_set(struct typec_switch *sw,
 		     enum typec_orientation orientation)
 {
 	struct typec_switch_dev *sw_dev;
+	unsigned int i;
+	int ret;
 
 	if (IS_ERR_OR_NULL(sw))
 		return 0;
 
-	sw_dev = sw->sw_dev;
+	for (i = 0; i < sw->num_sw_devs; i++) {
+		sw_dev = sw->sw_devs[i];
+
+		ret = sw_dev->set(sw_dev, orientation);
+		if (ret)
+			return ret;
+	}
 
-	return sw_dev->set(sw_dev, orientation);
+	return 0;
 }
 EXPORT_SYMBOL_GPL(typec_switch_set);
 
@@ -211,7 +250,8 @@ EXPORT_SYMBOL_GPL(typec_switch_get_drvdata);
 /* ------------------------------------------------------------------------- */
 
 struct typec_mux {
-	struct typec_mux_dev *mux_dev;
+	struct typec_mux_dev *mux_devs[TYPEC_MUX_MAX_DEVS];
+	unsigned int num_mux_devs;
 };
 
 static int mux_fwnode_match(struct device *dev, const void *fwnode)
@@ -294,25 +334,50 @@ static void *typec_mux_match(struct fwnode_handle *fwnode, const char *id,
 struct typec_mux *fwnode_typec_mux_get(struct fwnode_handle *fwnode,
 				       const struct typec_altmode_desc *desc)
 {
-	struct typec_mux_dev *mux_dev;
+	struct typec_mux_dev *mux_devs[TYPEC_MUX_MAX_DEVS];
 	struct typec_mux *mux;
+	int count;
+	int err;
+	int i;
 
 	mux = kzalloc(sizeof(*mux), GFP_KERNEL);
 	if (!mux)
 		return ERR_PTR(-ENOMEM);
 
-	mux_dev = fwnode_connection_find_match(fwnode, "mode-switch", (void *)desc,
-					       typec_mux_match);
-	if (IS_ERR_OR_NULL(mux_dev)) {
+	count = fwnode_connection_find_matches(fwnode, "mode-switch",
+					       (void *)desc, typec_mux_match,
+					       (void **)mux_devs,
+					       ARRAY_SIZE(mux_devs));
+	if (count <= 0) {
 		kfree(mux);
-		return ERR_CAST(mux_dev);
+		return NULL;
 	}
 
-	WARN_ON(!try_module_get(mux_dev->dev.parent->driver->owner));
+	for (i = 0; i < count; i++) {
+		if (IS_ERR(mux_devs[i])) {
+			err = PTR_ERR(mux_devs[i]);
+			goto put_mux_devs;
+		}
+	}
+
+	for (i = 0; i < count; i++) {
+		WARN_ON(!try_module_get(mux_devs[i]->dev.parent->driver->owner));
+		mux->mux_devs[i] = mux_devs[i];
+	}
 
-	mux->mux_dev = mux_dev;
+	mux->num_mux_devs = count;
 
 	return mux;
+
+put_mux_devs:
+	for (i = 0; i < count; i++) {
+		if (!IS_ERR(mux_devs[i]))
+			put_device(&mux_devs[i]->dev);
+	}
+
+	kfree(mux);
+
+	return ERR_PTR(err);
 }
 EXPORT_SYMBOL_GPL(fwnode_typec_mux_get);
 
@@ -325,13 +390,16 @@ EXPORT_SYMBOL_GPL(fwnode_typec_mux_get);
 void typec_mux_put(struct typec_mux *mux)
 {
 	struct typec_mux_dev *mux_dev;
+	unsigned int i;
 
 	if (IS_ERR_OR_NULL(mux))
 		return;
 
-	mux_dev = mux->mux_dev;
-	module_put(mux_dev->dev.parent->driver->owner);
-	put_device(&mux_dev->dev);
+	for (i = 0; i < mux->num_mux_devs; i++) {
+		mux_dev = mux->mux_devs[i];
+		module_put(mux_dev->dev.parent->driver->owner);
+		put_device(&mux_dev->dev);
+	}
 	kfree(mux);
 }
 EXPORT_SYMBOL_GPL(typec_mux_put);
@@ -339,13 +407,21 @@ EXPORT_SYMBOL_GPL(typec_mux_put);
 int typec_mux_set(struct typec_mux *mux, struct typec_mux_state *state)
 {
 	struct typec_mux_dev *mux_dev;
+	unsigned int i;
+	int ret;
 
 	if (IS_ERR_OR_NULL(mux))
 		return 0;
 
-	mux_dev = mux->mux_dev;
+	for (i = 0; i < mux->num_mux_devs; i++) {
+		mux_dev = mux->mux_devs[i];
+
+		ret = mux_dev->set(mux_dev, state);
+		if (ret)
+			return ret;
+	}
 
-	return mux_dev->set(mux_dev, state);
+	return 0;
 }
 EXPORT_SYMBOL_GPL(typec_mux_set);
 
-- 
2.35.1

[PATCH v5 6/7] dt-bindings: usb: Add binding for fcs,fsa4480

[Bjorn Andersson]

The Fairchild/ON Semiconductor FSA4480 Analog Audio switch is used in
USB Type-C configurations for muxing analog audio onto the USB
connector, and as such used to control the SBU signals for altmodes such
as DisplayPort.

Add a binding for this hardware block.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v4:
- None

 .../devicetree/bindings/usb/fcs,fsa4480.yaml  | 72 +++++++++++++++++++
 1 file changed, 72 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml

diff --git a/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml
new file mode 100644
index 000000000000..9473f26b0621
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/fcs,fsa4480.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/fcs,fsa4480.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: ON Semiconductor Analog Audio Switch
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - fcs,fsa4480
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vcc-supply:
+    description: power supply (2.7V-5.5V)
+
+  mode-switch:
+    description: Flag the port as possible handle of altmode switching
+    type: boolean
+
+  orientation-switch:
+    description: Flag the port as possible handler of orientation switching
+    type: boolean
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      A port node to link the FSA4480 to a TypeC controller for the purpose of
+      handling altmode muxing and orientation switching.
+
+required:
+  - compatible
+  - reg
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c13 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        fsa4480@42 {
+          compatible = "fcs,fsa4480";
+          reg = <0x42>;
+
+          interrupts-extended = <&tlmm 2 IRQ_TYPE_LEVEL_LOW>;
+
+          vcc-supply = <&vreg_bob>;
+
+          mode-switch;
+          orientation-switch;
+
+          port {
+            fsa4480_ept: endpoint {
+              remote-endpoint = <&typec_controller>;
+            };
+          };
+        };
+    };
+...
-- 
2.35.1

[PATCH v5 7/7] usb: typec: mux: Add On Semi fsa4480 driver

[Bjorn Andersson]

The ON Semiconductor FSA4480 is a USB Type-C port multimedia switch with
support for analog audio headsets. It allows sharing a common USB Type-C
port to pass USB2.0 signal, analog audio, sideband use wires and analog
microphone signal.

Due to lacking upstream audio support for testing, the audio muxing is
left untouched, but implementation of muxing the SBU lines is provided
as a pair of Type-C mux and switch devices. This provides the necessary
support for enabling the DisplayPort altmode on devices with this
circuit.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v4:
- Disable locking of the regmap
- Use dev_fwnode() instead of explicit dereference

 drivers/usb/typec/mux/Kconfig   |  10 ++
 drivers/usb/typec/mux/Makefile  |   1 +
 drivers/usb/typec/mux/fsa4480.c | 218 ++++++++++++++++++++++++++++++++
 3 files changed, 229 insertions(+)
 create mode 100644 drivers/usb/typec/mux/fsa4480.c

diff --git a/drivers/usb/typec/mux/Kconfig b/drivers/usb/typec/mux/Kconfig
index edead555835e..5eb2c17d72c1 100644
--- a/drivers/usb/typec/mux/Kconfig
+++ b/drivers/usb/typec/mux/Kconfig
@@ -2,6 +2,16 @@
 
 menu "USB Type-C Multiplexer/DeMultiplexer Switch support"
 
+config TYPEC_MUX_FSA4480
+	tristate "ON Semi FSA4480 Analog Audio Switch driver"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Driver for the ON Semiconductor FSA4480 Analog Audio Switch, which
+	  provides support for muxing analog audio and sideband signals on a
+	  common USB Type-C connector.
+	  If compiled as a module, the module will be named fsa4480.
+
 config TYPEC_MUX_PI3USB30532
 	tristate "Pericom PI3USB30532 Type-C cross switch driver"
 	depends on I2C
diff --git a/drivers/usb/typec/mux/Makefile b/drivers/usb/typec/mux/Makefile
index 280a6f553115..e52a56c16bfb 100644
--- a/drivers/usb/typec/mux/Makefile
+++ b/drivers/usb/typec/mux/Makefile
@@ -1,4 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
 
+obj-$(CONFIG_TYPEC_MUX_FSA4480)		+= fsa4480.o
 obj-$(CONFIG_TYPEC_MUX_PI3USB30532)	+= pi3usb30532.o
 obj-$(CONFIG_TYPEC_MUX_INTEL_PMC)	+= intel_pmc_mux.o
diff --git a/drivers/usb/typec/mux/fsa4480.c b/drivers/usb/typec/mux/fsa4480.c
new file mode 100644
index 000000000000..6184f5367190
--- /dev/null
+++ b/drivers/usb/typec/mux/fsa4480.c
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021-2022 Linaro Ltd.
+ * Copyright (C) 2018-2020 The Linux Foundation
+ */
+
+#include <linux/bits.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/usb/typec_dp.h>
+#include <linux/usb/typec_mux.h>
+
+#define FSA4480_SWITCH_ENABLE	0x04
+#define FSA4480_SWITCH_SELECT	0x05
+#define FSA4480_SWITCH_STATUS1	0x07
+#define FSA4480_SLOW_L		0x08
+#define FSA4480_SLOW_R		0x09
+#define FSA4480_SLOW_MIC	0x0a
+#define FSA4480_SLOW_SENSE	0x0b
+#define FSA4480_SLOW_GND	0x0c
+#define FSA4480_DELAY_L_R	0x0d
+#define FSA4480_DELAY_L_MIC	0x0e
+#define FSA4480_DELAY_L_SENSE	0x0f
+#define FSA4480_DELAY_L_AGND	0x10
+#define FSA4480_RESET		0x1e
+#define FSA4480_MAX_REGISTER	0x1f
+
+#define FSA4480_ENABLE_DEVICE	BIT(7)
+#define FSA4480_ENABLE_SBU	GENMASK(6, 5)
+#define FSA4480_ENABLE_USB	GENMASK(4, 3)
+
+#define FSA4480_SEL_SBU_REVERSE	GENMASK(6, 5)
+#define FSA4480_SEL_USB		GENMASK(4, 3)
+
+struct fsa4480 {
+	struct i2c_client *client;
+
+	/* used to serialize concurrent change requests */
+	struct mutex lock;
+
+	struct typec_switch_dev *sw;
+	struct typec_mux_dev *mux;
+
+	struct regmap *regmap;
+
+	u8 cur_enable;
+	u8 cur_select;
+};
+
+static const struct regmap_config fsa4480_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = FSA4480_MAX_REGISTER,
+	/* Accesses only done under fsa4480->lock */
+	.disable_locking = true,
+};
+
+static int fsa4480_switch_set(struct typec_switch_dev *sw,
+			      enum typec_orientation orientation)
+{
+	struct fsa4480 *fsa = typec_switch_get_drvdata(sw);
+	u8 new_sel;
+
+	mutex_lock(&fsa->lock);
+	new_sel = FSA4480_SEL_USB;
+	if (orientation == TYPEC_ORIENTATION_REVERSE)
+		new_sel |= FSA4480_SEL_SBU_REVERSE;
+
+	if (new_sel == fsa->cur_select)
+		goto out_unlock;
+
+	if (fsa->cur_enable & FSA4480_ENABLE_SBU) {
+		/* Disable SBU output while re-configuring the switch */
+		regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE,
+			     fsa->cur_enable & ~FSA4480_ENABLE_SBU);
+
+		/* 35us to allow the SBU switch to turn off */
+		usleep_range(35, 1000);
+	}
+
+	regmap_write(fsa->regmap, FSA4480_SWITCH_SELECT, new_sel);
+	fsa->cur_select = new_sel;
+
+	if (fsa->cur_enable & FSA4480_ENABLE_SBU) {
+		regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE, fsa->cur_enable);
+
+		/* 15us to allow the SBU switch to turn on again */
+		usleep_range(15, 1000);
+	}
+
+out_unlock:
+	mutex_unlock(&fsa->lock);
+
+	return 0;
+}
+
+static int fsa4480_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *state)
+{
+	struct fsa4480 *fsa = typec_mux_get_drvdata(mux);
+	u8 new_enable;
+
+	mutex_lock(&fsa->lock);
+
+	new_enable = FSA4480_ENABLE_DEVICE | FSA4480_ENABLE_USB;
+	if (state->mode >= TYPEC_DP_STATE_A)
+		new_enable |= FSA4480_ENABLE_SBU;
+
+	if (new_enable == fsa->cur_enable)
+		goto out_unlock;
+
+	regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE, new_enable);
+	fsa->cur_enable = new_enable;
+
+	if (new_enable & FSA4480_ENABLE_SBU) {
+		/* 15us to allow the SBU switch to turn off */
+		usleep_range(15, 1000);
+	}
+
+out_unlock:
+	mutex_unlock(&fsa->lock);
+
+	return 0;
+}
+
+static int fsa4480_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct typec_switch_desc sw_desc = { };
+	struct typec_mux_desc mux_desc = { };
+	struct fsa4480 *fsa;
+
+	fsa = devm_kzalloc(dev, sizeof(*fsa), GFP_KERNEL);
+	if (!fsa)
+		return -ENOMEM;
+
+	fsa->client = client;
+	mutex_init(&fsa->lock);
+
+	fsa->regmap = devm_regmap_init_i2c(client, &fsa4480_regmap_config);
+	if (IS_ERR(fsa->regmap))
+		return dev_err_probe(dev, PTR_ERR(fsa->regmap), "failed to initialize regmap\n");
+
+	fsa->cur_enable = FSA4480_ENABLE_DEVICE | FSA4480_ENABLE_USB;
+	fsa->cur_select = FSA4480_SEL_USB;
+
+	/* set default settings */
+	regmap_write(fsa->regmap, FSA4480_SLOW_L, 0x00);
+	regmap_write(fsa->regmap, FSA4480_SLOW_R, 0x00);
+	regmap_write(fsa->regmap, FSA4480_SLOW_MIC, 0x00);
+	regmap_write(fsa->regmap, FSA4480_SLOW_SENSE, 0x00);
+	regmap_write(fsa->regmap, FSA4480_SLOW_GND, 0x00);
+	regmap_write(fsa->regmap, FSA4480_DELAY_L_R, 0x00);
+	regmap_write(fsa->regmap, FSA4480_DELAY_L_MIC, 0x00);
+	regmap_write(fsa->regmap, FSA4480_DELAY_L_SENSE, 0x00);
+	regmap_write(fsa->regmap, FSA4480_DELAY_L_AGND, 0x09);
+	regmap_write(fsa->regmap, FSA4480_SWITCH_SELECT, fsa->cur_select);
+	regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE, fsa->cur_enable);
+
+	sw_desc.drvdata = fsa;
+	sw_desc.fwnode = dev_fwnode(dev);
+	sw_desc.set = fsa4480_switch_set;
+
+	fsa->sw = typec_switch_register(dev, &sw_desc);
+	if (IS_ERR(fsa->sw))
+		return dev_err_probe(dev, PTR_ERR(fsa->sw), "failed to register typec switch\n");
+
+	mux_desc.drvdata = fsa;
+	mux_desc.fwnode = dev_fwnode(dev);
+	mux_desc.set = fsa4480_mux_set;
+
+	fsa->mux = typec_mux_register(dev, &mux_desc);
+	if (IS_ERR(fsa->mux)) {
+		typec_switch_unregister(fsa->sw);
+		return dev_err_probe(dev, PTR_ERR(fsa->mux), "failed to register typec mux\n");
+	}
+
+	i2c_set_clientdata(client, fsa);
+	return 0;
+}
+
+static int fsa4480_remove(struct i2c_client *client)
+{
+	struct fsa4480 *fsa = i2c_get_clientdata(client);
+
+	typec_mux_unregister(fsa->mux);
+	typec_switch_unregister(fsa->sw);
+
+	return 0;
+}
+
+static const struct i2c_device_id fsa4480_table[] = {
+	{ "fsa4480" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, fsa4480_table);
+
+static const struct of_device_id fsa4480_of_table[] = {
+	{ .compatible = "fcs,fsa4480" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, fsa4480_of_table);
+
+static struct i2c_driver fsa4480_driver = {
+	.driver = {
+		.name = "fsa4480",
+		.of_match_table = fsa4480_of_table,
+	},
+	.probe_new	= fsa4480_probe,
+	.remove		= fsa4480_remove,
+	.id_table	= fsa4480_table,
+};
+module_i2c_driver(fsa4480_driver);
+
+MODULE_DESCRIPTION("ON Semiconductor FSA4480 driver");
+MODULE_LICENSE("GPL v2");
-- 
2.35.1

Re: [PATCH v5 7/7] usb: typec: mux: Add On Semi fsa4480 driver

[Heikki Krogerus]

On Fri, Apr 22, 2022 at 03:23:51PM -0700, Bjorn Andersson wrote:
> The ON Semiconductor FSA4480 is a USB Type-C port multimedia switch with
> support for analog audio headsets. It allows sharing a common USB Type-C
> port to pass USB2.0 signal, analog audio, sideband use wires and analog
> microphone signal.
> 
> Due to lacking upstream audio support for testing, the audio muxing is
> left untouched, but implementation of muxing the SBU lines is provided
> as a pair of Type-C mux and switch devices. This provides the necessary
> support for enabling the DisplayPort altmode on devices with this
> circuit.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>

> ---
> 
> Changes since v4:
> - Disable locking of the regmap
> - Use dev_fwnode() instead of explicit dereference
> 
>  drivers/usb/typec/mux/Kconfig   |  10 ++
>  drivers/usb/typec/mux/Makefile  |   1 +
>  drivers/usb/typec/mux/fsa4480.c | 218 ++++++++++++++++++++++++++++++++
>  3 files changed, 229 insertions(+)
>  create mode 100644 drivers/usb/typec/mux/fsa4480.c
> 
> diff --git a/drivers/usb/typec/mux/Kconfig b/drivers/usb/typec/mux/Kconfig
> index edead555835e..5eb2c17d72c1 100644
> --- a/drivers/usb/typec/mux/Kconfig
> +++ b/drivers/usb/typec/mux/Kconfig
> @@ -2,6 +2,16 @@
>  
>  menu "USB Type-C Multiplexer/DeMultiplexer Switch support"
>  
> +config TYPEC_MUX_FSA4480
> +	tristate "ON Semi FSA4480 Analog Audio Switch driver"
> +	depends on I2C
> +	select REGMAP_I2C
> +	help
> +	  Driver for the ON Semiconductor FSA4480 Analog Audio Switch, which
> +	  provides support for muxing analog audio and sideband signals on a
> +	  common USB Type-C connector.
> +	  If compiled as a module, the module will be named fsa4480.
> +
>  config TYPEC_MUX_PI3USB30532
>  	tristate "Pericom PI3USB30532 Type-C cross switch driver"
>  	depends on I2C
> diff --git a/drivers/usb/typec/mux/Makefile b/drivers/usb/typec/mux/Makefile
> index 280a6f553115..e52a56c16bfb 100644
> --- a/drivers/usb/typec/mux/Makefile
> +++ b/drivers/usb/typec/mux/Makefile
> @@ -1,4 +1,5 @@
>  # SPDX-License-Identifier: GPL-2.0
>  
> +obj-$(CONFIG_TYPEC_MUX_FSA4480)		+= fsa4480.o
>  obj-$(CONFIG_TYPEC_MUX_PI3USB30532)	+= pi3usb30532.o
>  obj-$(CONFIG_TYPEC_MUX_INTEL_PMC)	+= intel_pmc_mux.o
> diff --git a/drivers/usb/typec/mux/fsa4480.c b/drivers/usb/typec/mux/fsa4480.c
> new file mode 100644
> index 000000000000..6184f5367190
> --- /dev/null
> +++ b/drivers/usb/typec/mux/fsa4480.c
> @@ -0,0 +1,218 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2021-2022 Linaro Ltd.
> + * Copyright (C) 2018-2020 The Linux Foundation
> + */
> +
> +#include <linux/bits.h>
> +#include <linux/i2c.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/regmap.h>
> +#include <linux/usb/typec_dp.h>
> +#include <linux/usb/typec_mux.h>
> +
> +#define FSA4480_SWITCH_ENABLE	0x04
> +#define FSA4480_SWITCH_SELECT	0x05
> +#define FSA4480_SWITCH_STATUS1	0x07
> +#define FSA4480_SLOW_L		0x08
> +#define FSA4480_SLOW_R		0x09
> +#define FSA4480_SLOW_MIC	0x0a
> +#define FSA4480_SLOW_SENSE	0x0b
> +#define FSA4480_SLOW_GND	0x0c
> +#define FSA4480_DELAY_L_R	0x0d
> +#define FSA4480_DELAY_L_MIC	0x0e
> +#define FSA4480_DELAY_L_SENSE	0x0f
> +#define FSA4480_DELAY_L_AGND	0x10
> +#define FSA4480_RESET		0x1e
> +#define FSA4480_MAX_REGISTER	0x1f
> +
> +#define FSA4480_ENABLE_DEVICE	BIT(7)
> +#define FSA4480_ENABLE_SBU	GENMASK(6, 5)
> +#define FSA4480_ENABLE_USB	GENMASK(4, 3)
> +
> +#define FSA4480_SEL_SBU_REVERSE	GENMASK(6, 5)
> +#define FSA4480_SEL_USB		GENMASK(4, 3)
> +
> +struct fsa4480 {
> +	struct i2c_client *client;
> +
> +	/* used to serialize concurrent change requests */
> +	struct mutex lock;
> +
> +	struct typec_switch_dev *sw;
> +	struct typec_mux_dev *mux;
> +
> +	struct regmap *regmap;
> +
> +	u8 cur_enable;
> +	u8 cur_select;
> +};
> +
> +static const struct regmap_config fsa4480_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +	.max_register = FSA4480_MAX_REGISTER,
> +	/* Accesses only done under fsa4480->lock */
> +	.disable_locking = true,
> +};
> +
> +static int fsa4480_switch_set(struct typec_switch_dev *sw,
> +			      enum typec_orientation orientation)
> +{
> +	struct fsa4480 *fsa = typec_switch_get_drvdata(sw);
> +	u8 new_sel;
> +
> +	mutex_lock(&fsa->lock);
> +	new_sel = FSA4480_SEL_USB;
> +	if (orientation == TYPEC_ORIENTATION_REVERSE)
> +		new_sel |= FSA4480_SEL_SBU_REVERSE;
> +
> +	if (new_sel == fsa->cur_select)
> +		goto out_unlock;
> +
> +	if (fsa->cur_enable & FSA4480_ENABLE_SBU) {
> +		/* Disable SBU output while re-configuring the switch */
> +		regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE,
> +			     fsa->cur_enable & ~FSA4480_ENABLE_SBU);
> +
> +		/* 35us to allow the SBU switch to turn off */
> +		usleep_range(35, 1000);
> +	}
> +
> +	regmap_write(fsa->regmap, FSA4480_SWITCH_SELECT, new_sel);
> +	fsa->cur_select = new_sel;
> +
> +	if (fsa->cur_enable & FSA4480_ENABLE_SBU) {
> +		regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE, fsa->cur_enable);
> +
> +		/* 15us to allow the SBU switch to turn on again */
> +		usleep_range(15, 1000);
> +	}
> +
> +out_unlock:
> +	mutex_unlock(&fsa->lock);
> +
> +	return 0;
> +}
> +
> +static int fsa4480_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *state)
> +{
> +	struct fsa4480 *fsa = typec_mux_get_drvdata(mux);
> +	u8 new_enable;
> +
> +	mutex_lock(&fsa->lock);
> +
> +	new_enable = FSA4480_ENABLE_DEVICE | FSA4480_ENABLE_USB;
> +	if (state->mode >= TYPEC_DP_STATE_A)
> +		new_enable |= FSA4480_ENABLE_SBU;
> +
> +	if (new_enable == fsa->cur_enable)
> +		goto out_unlock;
> +
> +	regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE, new_enable);
> +	fsa->cur_enable = new_enable;
> +
> +	if (new_enable & FSA4480_ENABLE_SBU) {
> +		/* 15us to allow the SBU switch to turn off */
> +		usleep_range(15, 1000);
> +	}
> +
> +out_unlock:
> +	mutex_unlock(&fsa->lock);
> +
> +	return 0;
> +}
> +
> +static int fsa4480_probe(struct i2c_client *client)
> +{
> +	struct device *dev = &client->dev;
> +	struct typec_switch_desc sw_desc = { };
> +	struct typec_mux_desc mux_desc = { };
> +	struct fsa4480 *fsa;
> +
> +	fsa = devm_kzalloc(dev, sizeof(*fsa), GFP_KERNEL);
> +	if (!fsa)
> +		return -ENOMEM;
> +
> +	fsa->client = client;
> +	mutex_init(&fsa->lock);
> +
> +	fsa->regmap = devm_regmap_init_i2c(client, &fsa4480_regmap_config);
> +	if (IS_ERR(fsa->regmap))
> +		return dev_err_probe(dev, PTR_ERR(fsa->regmap), "failed to initialize regmap\n");
> +
> +	fsa->cur_enable = FSA4480_ENABLE_DEVICE | FSA4480_ENABLE_USB;
> +	fsa->cur_select = FSA4480_SEL_USB;
> +
> +	/* set default settings */
> +	regmap_write(fsa->regmap, FSA4480_SLOW_L, 0x00);
> +	regmap_write(fsa->regmap, FSA4480_SLOW_R, 0x00);
> +	regmap_write(fsa->regmap, FSA4480_SLOW_MIC, 0x00);
> +	regmap_write(fsa->regmap, FSA4480_SLOW_SENSE, 0x00);
> +	regmap_write(fsa->regmap, FSA4480_SLOW_GND, 0x00);
> +	regmap_write(fsa->regmap, FSA4480_DELAY_L_R, 0x00);
> +	regmap_write(fsa->regmap, FSA4480_DELAY_L_MIC, 0x00);
> +	regmap_write(fsa->regmap, FSA4480_DELAY_L_SENSE, 0x00);
> +	regmap_write(fsa->regmap, FSA4480_DELAY_L_AGND, 0x09);
> +	regmap_write(fsa->regmap, FSA4480_SWITCH_SELECT, fsa->cur_select);
> +	regmap_write(fsa->regmap, FSA4480_SWITCH_ENABLE, fsa->cur_enable);
> +
> +	sw_desc.drvdata = fsa;
> +	sw_desc.fwnode = dev_fwnode(dev);
> +	sw_desc.set = fsa4480_switch_set;
> +
> +	fsa->sw = typec_switch_register(dev, &sw_desc);
> +	if (IS_ERR(fsa->sw))
> +		return dev_err_probe(dev, PTR_ERR(fsa->sw), "failed to register typec switch\n");
> +
> +	mux_desc.drvdata = fsa;
> +	mux_desc.fwnode = dev_fwnode(dev);
> +	mux_desc.set = fsa4480_mux_set;
> +
> +	fsa->mux = typec_mux_register(dev, &mux_desc);
> +	if (IS_ERR(fsa->mux)) {
> +		typec_switch_unregister(fsa->sw);
> +		return dev_err_probe(dev, PTR_ERR(fsa->mux), "failed to register typec mux\n");
> +	}
> +
> +	i2c_set_clientdata(client, fsa);
> +	return 0;
> +}
> +
> +static int fsa4480_remove(struct i2c_client *client)
> +{
> +	struct fsa4480 *fsa = i2c_get_clientdata(client);
> +
> +	typec_mux_unregister(fsa->mux);
> +	typec_switch_unregister(fsa->sw);
> +
> +	return 0;
> +}
> +
> +static const struct i2c_device_id fsa4480_table[] = {
> +	{ "fsa4480" },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(i2c, fsa4480_table);
> +
> +static const struct of_device_id fsa4480_of_table[] = {
> +	{ .compatible = "fcs,fsa4480" },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, fsa4480_of_table);
> +
> +static struct i2c_driver fsa4480_driver = {
> +	.driver = {
> +		.name = "fsa4480",
> +		.of_match_table = fsa4480_of_table,
> +	},
> +	.probe_new	= fsa4480_probe,
> +	.remove		= fsa4480_remove,
> +	.id_table	= fsa4480_table,
> +};
> +module_i2c_driver(fsa4480_driver);
> +
> +MODULE_DESCRIPTION("ON Semiconductor FSA4480 driver");
> +MODULE_LICENSE("GPL v2");
> -- 
> 2.35.1

-- 
heikki

Re: [PATCH v5 3/7] usb: typec: mux: Check dev_set_name() return value

[Andy Shevchenko]

On Sat, Apr 23, 2022 at 1:25 AM Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:
>
> It's possible that dev_set_name() returns -ENOMEM, catch and handle this.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> Fixes: 3370db35193b ("usb: typec: Registering real device entries for the muxes")
> Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
>
> Changes since v4:
> - Added Fixes tag
>
>  drivers/usb/typec/mux.c | 14 ++++++++++----
>  1 file changed, 10 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/usb/typec/mux.c b/drivers/usb/typec/mux.c
> index c8340de0ed49..d2aaf294b649 100644
> --- a/drivers/usb/typec/mux.c
> +++ b/drivers/usb/typec/mux.c
> @@ -131,8 +131,11 @@ typec_switch_register(struct device *parent,
>         sw->dev.class = &typec_mux_class;
>         sw->dev.type = &typec_switch_dev_type;
>         sw->dev.driver_data = desc->drvdata;
> -       dev_set_name(&sw->dev, "%s-switch",
> -                    desc->name ? desc->name : dev_name(parent));
> +       ret = dev_set_name(&sw->dev, "%s-switch", desc->name ? desc->name : dev_name(parent));
> +       if (ret) {
> +               put_device(&sw->dev);
> +               return ERR_PTR(ret);
> +       }
>
>         ret = device_add(&sw->dev);
>         if (ret) {
> @@ -338,8 +341,11 @@ typec_mux_register(struct device *parent, const struct typec_mux_desc *desc)
>         mux->dev.class = &typec_mux_class;
>         mux->dev.type = &typec_mux_dev_type;
>         mux->dev.driver_data = desc->drvdata;
> -       dev_set_name(&mux->dev, "%s-mux",
> -                    desc->name ? desc->name : dev_name(parent));
> +       ret = dev_set_name(&mux->dev, "%s-mux", desc->name ? desc->name : dev_name(parent));
> +       if (ret) {
> +               put_device(&mux->dev);
> +               return ERR_PTR(ret);
> +       }
>
>         ret = device_add(&mux->dev);
>         if (ret) {
> --
> 2.35.1
>


-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v5 1/7] device property: Add helper to match multiple connections

[Andy Shevchenko]

On Sat, Apr 23, 2022 at 1:25 AM Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:
>
> In some cases multiple connections with the same connection id
> needs to be resolved from a fwnode graph.
>
> One such example is when separate hardware is used for performing muxing
> and/or orientation switching of the SuperSpeed and SBU lines in a USB
> Type-C connector. In this case the connector needs to belong to a graph
> with multiple matching remote endpoints, and the Type-C controller needs
> to be able to resolve them both.
>
> Add a new API that allows this kind of lookup.

LGTM now,
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
thanks!

> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
>
> Changes since v4:
> - Added "Add" to patch subject
> - Added "(Optional)" kernel-doc of fwnode_connection_find_matches()
>
>  drivers/base/property.c  | 109 +++++++++++++++++++++++++++++++++++++++
>  include/linux/property.h |   5 ++
>  2 files changed, 114 insertions(+)
>
> diff --git a/drivers/base/property.c b/drivers/base/property.c
> index 36401cfe432c..babab8cec7a0 100644
> --- a/drivers/base/property.c
> +++ b/drivers/base/property.c
> @@ -1201,6 +1201,40 @@ fwnode_graph_devcon_match(struct fwnode_handle *fwnode, const char *con_id,
>         return NULL;
>  }
>
> +static unsigned int fwnode_graph_devcon_matches(struct fwnode_handle *fwnode,
> +                                               const char *con_id, void *data,
> +                                               devcon_match_fn_t match,
> +                                               void **matches,
> +                                               unsigned int matches_len)
> +{
> +       struct fwnode_handle *node;
> +       struct fwnode_handle *ep;
> +       unsigned int count = 0;
> +       void *ret;
> +
> +       fwnode_graph_for_each_endpoint(fwnode, ep) {
> +               if (matches && count >= matches_len) {
> +                       fwnode_handle_put(ep);
> +                       break;
> +               }
> +
> +               node = fwnode_graph_get_remote_port_parent(ep);
> +               if (!fwnode_device_is_available(node)) {
> +                       fwnode_handle_put(node);
> +                       continue;
> +               }
> +
> +               ret = match(node, con_id, data);
> +               fwnode_handle_put(node);
> +               if (ret) {
> +                       if (matches)
> +                               matches[count] = ret;
> +                       count++;
> +               }
> +       }
> +       return count;
> +}
> +
>  static void *
>  fwnode_devcon_match(struct fwnode_handle *fwnode, const char *con_id,
>                     void *data, devcon_match_fn_t match)
> @@ -1223,6 +1257,37 @@ fwnode_devcon_match(struct fwnode_handle *fwnode, const char *con_id,
>         return NULL;
>  }
>
> +static unsigned int fwnode_devcon_matches(struct fwnode_handle *fwnode,
> +                                         const char *con_id, void *data,
> +                                         devcon_match_fn_t match,
> +                                         void **matches,
> +                                         unsigned int matches_len)
> +{
> +       struct fwnode_handle *node;
> +       unsigned int count = 0;
> +       unsigned int i;
> +       void *ret;
> +
> +       for (i = 0; ; i++) {
> +               if (matches && count >= matches_len)
> +                       break;
> +
> +               node = fwnode_find_reference(fwnode, con_id, i);
> +               if (IS_ERR(node))
> +                       break;
> +
> +               ret = match(node, NULL, data);
> +               fwnode_handle_put(node);
> +               if (ret) {
> +                       if (matches)
> +                               matches[count] = ret;
> +                       count++;
> +               }
> +       }
> +
> +       return count;
> +}
> +
>  /**
>   * fwnode_connection_find_match - Find connection from a device node
>   * @fwnode: Device node with the connection
> @@ -1250,3 +1315,47 @@ void *fwnode_connection_find_match(struct fwnode_handle *fwnode,
>         return fwnode_devcon_match(fwnode, con_id, data, match);
>  }
>  EXPORT_SYMBOL_GPL(fwnode_connection_find_match);
> +
> +/**
> + * fwnode_connection_find_matches - Find connections from a device node
> + * @fwnode: Device node with the connection
> + * @con_id: Identifier for the connection
> + * @data: Data for the match function
> + * @match: Function to check and convert the connection description
> + * @matches: (Optional) array of pointers to fill with matches
> + * @matches_len: Length of @matches
> + *
> + * Find up to @matches_len connections with unique identifier @con_id between
> + * @fwnode and other device nodes. @match will be used to convert the
> + * connection description to data the caller is expecting to be returned
> + * through the @matches array.
> + * If @matches is NULL @matches_len is ignored and the total number of resolved
> + * matches is returned.
> + *
> + * Return: Number of matches resolved, or negative errno.
> + */
> +int fwnode_connection_find_matches(struct fwnode_handle *fwnode,
> +                                  const char *con_id, void *data,
> +                                  devcon_match_fn_t match,
> +                                  void **matches, unsigned int matches_len)
> +{
> +       unsigned int count_graph;
> +       unsigned int count_ref;
> +
> +       if (!fwnode || !match)
> +               return -EINVAL;
> +
> +       count_graph = fwnode_graph_devcon_matches(fwnode, con_id, data, match,
> +                                                 matches, matches_len);
> +
> +       if (matches) {
> +               matches += count_graph;
> +               matches_len -= count_graph;
> +       }
> +
> +       count_ref = fwnode_devcon_matches(fwnode, con_id, data, match,
> +                                         matches, matches_len);
> +
> +       return count_graph + count_ref;
> +}
> +EXPORT_SYMBOL_GPL(fwnode_connection_find_matches);
> diff --git a/include/linux/property.h b/include/linux/property.h
> index fc24d45632eb..a5b429d623f6 100644
> --- a/include/linux/property.h
> +++ b/include/linux/property.h
> @@ -451,6 +451,11 @@ static inline void *device_connection_find_match(struct device *dev,
>         return fwnode_connection_find_match(dev_fwnode(dev), con_id, data, match);
>  }
>
> +int fwnode_connection_find_matches(struct fwnode_handle *fwnode,
> +                                  const char *con_id, void *data,
> +                                  devcon_match_fn_t match,
> +                                  void **matches, unsigned int matches_len);
> +
>  /* -------------------------------------------------------------------------- */
>  /* Software fwnode support - when HW description is incomplete or missing */
>
> --
> 2.35.1
>


-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v5 0/7] typec: mux: Introduce support for multiple USB TypeC muxes

[Sakari Ailus]

Hi Björn,

On Fri, Apr 22, 2022 at 03:23:44PM -0700, Bjorn Andersson wrote:
> This series introduces a level of indirection between the controller's view of
> a typec_mux/switch and the implementation and then expands that to support
> multiple drivers.
> 
> This is needed in order to support devices such as the Qualcomm Snapdragon 888
> HDK, which does muxing and orientation handling in the QMP (USB+DP) PHY and SBU
> muxing in the external FSA4480 chip.

For patches 1 and 2:

Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>

-- 
Sakari Ailus

Re: [PATCH v5 1/7] device property: Add helper to match multiple connections

[Rafael J. Wysocki]

On Tue, Apr 26, 2022 at 12:15 PM Andy Shevchenko
<andy.shevchenko@gmail.com> wrote:
>
> On Sat, Apr 23, 2022 at 1:25 AM Bjorn Andersson
> <bjorn.andersson@linaro.org> wrote:
> >
> > In some cases multiple connections with the same connection id
> > needs to be resolved from a fwnode graph.
> >
> > One such example is when separate hardware is used for performing muxing
> > and/or orientation switching of the SuperSpeed and SBU lines in a USB
> > Type-C connector. In this case the connector needs to belong to a graph
> > with multiple matching remote endpoints, and the Type-C controller needs
> > to be able to resolve them both.
> >
> > Add a new API that allows this kind of lookup.
>
> LGTM now,
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> thanks!

For this and the next patch in the series:

Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

and please feel free to route the whole lot via USB.

Thanks!

> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > ---
> >
> > Changes since v4:
> > - Added "Add" to patch subject
> > - Added "(Optional)" kernel-doc of fwnode_connection_find_matches()
> >
> >  drivers/base/property.c  | 109 +++++++++++++++++++++++++++++++++++++++
> >  include/linux/property.h |   5 ++
> >  2 files changed, 114 insertions(+)
> >
> > diff --git a/drivers/base/property.c b/drivers/base/property.c
> > index 36401cfe432c..babab8cec7a0 100644
> > --- a/drivers/base/property.c
> > +++ b/drivers/base/property.c
> > @@ -1201,6 +1201,40 @@ fwnode_graph_devcon_match(struct fwnode_handle *fwnode, const char *con_id,
> >         return NULL;
> >  }
> >
> > +static unsigned int fwnode_graph_devcon_matches(struct fwnode_handle *fwnode,
> > +                                               const char *con_id, void *data,
> > +                                               devcon_match_fn_t match,
> > +                                               void **matches,
> > +                                               unsigned int matches_len)
> > +{
> > +       struct fwnode_handle *node;
> > +       struct fwnode_handle *ep;
> > +       unsigned int count = 0;
> > +       void *ret;
> > +
> > +       fwnode_graph_for_each_endpoint(fwnode, ep) {
> > +               if (matches && count >= matches_len) {
> > +                       fwnode_handle_put(ep);
> > +                       break;
> > +               }
> > +
> > +               node = fwnode_graph_get_remote_port_parent(ep);
> > +               if (!fwnode_device_is_available(node)) {
> > +                       fwnode_handle_put(node);
> > +                       continue;
> > +               }
> > +
> > +               ret = match(node, con_id, data);
> > +               fwnode_handle_put(node);
> > +               if (ret) {
> > +                       if (matches)
> > +                               matches[count] = ret;
> > +                       count++;
> > +               }
> > +       }
> > +       return count;
> > +}
> > +
> >  static void *
> >  fwnode_devcon_match(struct fwnode_handle *fwnode, const char *con_id,
> >                     void *data, devcon_match_fn_t match)
> > @@ -1223,6 +1257,37 @@ fwnode_devcon_match(struct fwnode_handle *fwnode, const char *con_id,
> >         return NULL;
> >  }
> >
> > +static unsigned int fwnode_devcon_matches(struct fwnode_handle *fwnode,
> > +                                         const char *con_id, void *data,
> > +                                         devcon_match_fn_t match,
> > +                                         void **matches,
> > +                                         unsigned int matches_len)
> > +{
> > +       struct fwnode_handle *node;
> > +       unsigned int count = 0;
> > +       unsigned int i;
> > +       void *ret;
> > +
> > +       for (i = 0; ; i++) {
> > +               if (matches && count >= matches_len)
> > +                       break;
> > +
> > +               node = fwnode_find_reference(fwnode, con_id, i);
> > +               if (IS_ERR(node))
> > +                       break;
> > +
> > +               ret = match(node, NULL, data);
> > +               fwnode_handle_put(node);
> > +               if (ret) {
> > +                       if (matches)
> > +                               matches[count] = ret;
> > +                       count++;
> > +               }
> > +       }
> > +
> > +       return count;
> > +}
> > +
> >  /**
> >   * fwnode_connection_find_match - Find connection from a device node
> >   * @fwnode: Device node with the connection
> > @@ -1250,3 +1315,47 @@ void *fwnode_connection_find_match(struct fwnode_handle *fwnode,
> >         return fwnode_devcon_match(fwnode, con_id, data, match);
> >  }
> >  EXPORT_SYMBOL_GPL(fwnode_connection_find_match);
> > +
> > +/**
> > + * fwnode_connection_find_matches - Find connections from a device node
> > + * @fwnode: Device node with the connection
> > + * @con_id: Identifier for the connection
> > + * @data: Data for the match function
> > + * @match: Function to check and convert the connection description
> > + * @matches: (Optional) array of pointers to fill with matches
> > + * @matches_len: Length of @matches
> > + *
> > + * Find up to @matches_len connections with unique identifier @con_id between
> > + * @fwnode and other device nodes. @match will be used to convert the
> > + * connection description to data the caller is expecting to be returned
> > + * through the @matches array.
> > + * If @matches is NULL @matches_len is ignored and the total number of resolved
> > + * matches is returned.
> > + *
> > + * Return: Number of matches resolved, or negative errno.
> > + */
> > +int fwnode_connection_find_matches(struct fwnode_handle *fwnode,
> > +                                  const char *con_id, void *data,
> > +                                  devcon_match_fn_t match,
> > +                                  void **matches, unsigned int matches_len)
> > +{
> > +       unsigned int count_graph;
> > +       unsigned int count_ref;
> > +
> > +       if (!fwnode || !match)
> > +               return -EINVAL;
> > +
> > +       count_graph = fwnode_graph_devcon_matches(fwnode, con_id, data, match,
> > +                                                 matches, matches_len);
> > +
> > +       if (matches) {
> > +               matches += count_graph;
> > +               matches_len -= count_graph;
> > +       }
> > +
> > +       count_ref = fwnode_devcon_matches(fwnode, con_id, data, match,
> > +                                         matches, matches_len);
> > +
> > +       return count_graph + count_ref;
> > +}
> > +EXPORT_SYMBOL_GPL(fwnode_connection_find_matches);
> > diff --git a/include/linux/property.h b/include/linux/property.h
> > index fc24d45632eb..a5b429d623f6 100644
> > --- a/include/linux/property.h
> > +++ b/include/linux/property.h
> > @@ -451,6 +451,11 @@ static inline void *device_connection_find_match(struct device *dev,
> >         return fwnode_connection_find_match(dev_fwnode(dev), con_id, data, match);
> >  }
> >
> > +int fwnode_connection_find_matches(struct fwnode_handle *fwnode,
> > +                                  const char *con_id, void *data,
> > +                                  devcon_match_fn_t match,
> > +                                  void **matches, unsigned int matches_len);
> > +
> >  /* -------------------------------------------------------------------------- */
> >  /* Software fwnode support - when HW description is incomplete or missing */
> >
> > --
> > 2.35.1
> >
>
>
> --
> With Best Regards,
> Andy Shevchenko