[PATCH 0/4] Add Toshiba Visconti DNN image processing accelerator driver

All of lore.kernel.org
 help / color / mirror / Atom feed

* [PATCH 0/4] Add Toshiba Visconti DNN image processing accelerator driver
@ 2022-04-28 13:11 ` Yuji Ishikawa
  0 siblings, 0 replies; 36+ messages in thread
From: Yuji Ishikawa @ 2022-04-28 13:11 UTC (permalink / raw)
  To: Rob Herring, Nobuhiro Iwamatsu, Sumit Semwal, Christian König
  Cc: linux-kernel, dri-devel, linaro-mm-sig, yuji2.ishikawa,
	linux-arm-kernel, linux-media

This series is the DNN image processing accelerator driver for Toshiba's ARM SoC, Visconti[0].
This provides DT binding documentation, device driver, MAINTAINER files.

The second patch "soc: visconti: Add Toshiba Visconti image processing accelerator common source"
and the fourth patch "MAINTAINERS: ..." are the same as the ones in the preceding post for affine driver.

Best regards,
Yuji

[0]: https://toshiba.semicon-storage.com/ap-en/semiconductor/product/image-recognition-processors-visconti.html

Yuji Ishikawa (4):
  dt-bindings: soc: visconti: Add Toshiba Visconti DNN image processing
    accelerator bindings
  soc: visconti: Add Toshiba Visconti image processing accelerator
    common source
  soc: visconti: Add Toshiba Visconti DNN image processing accelerator
  MAINTAINERS: Add entries for Toshiba Visconti DNN image processing
    accelerator

 .../soc/visconti/toshiba,visconti-dnn.yaml    |  54 ++
 MAINTAINERS                                   |   2 +
 drivers/soc/Kconfig                           |   1 +
 drivers/soc/Makefile                          |   1 +
 drivers/soc/visconti/Kconfig                  |   7 +
 drivers/soc/visconti/Makefile                 |   8 +
 drivers/soc/visconti/dnn/Makefile             |   6 +
 drivers/soc/visconti/dnn/dnn.c                | 533 ++++++++++++++++++
 drivers/soc/visconti/dnn/hwd_dnn.c            | 183 ++++++
 drivers/soc/visconti/dnn/hwd_dnn.h            |  68 +++
 drivers/soc/visconti/dnn/hwd_dnn_reg.h        | 228 ++++++++
 drivers/soc/visconti/ipa_common.c             |  55 ++
 drivers/soc/visconti/ipa_common.h             |  18 +
 drivers/soc/visconti/uapi/dnn.h               |  77 +++
 drivers/soc/visconti/uapi/ipa.h               |  88 +++
 15 files changed, 1329 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.yaml
 create mode 100644 drivers/soc/visconti/Kconfig
 create mode 100644 drivers/soc/visconti/Makefile
 create mode 100644 drivers/soc/visconti/dnn/Makefile
 create mode 100644 drivers/soc/visconti/dnn/dnn.c
 create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.c
 create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.h
 create mode 100644 drivers/soc/visconti/dnn/hwd_dnn_reg.h
 create mode 100644 drivers/soc/visconti/ipa_common.c
 create mode 100644 drivers/soc/visconti/ipa_common.h
 create mode 100644 drivers/soc/visconti/uapi/dnn.h
 create mode 100644 drivers/soc/visconti/uapi/ipa.h

-- 
2.17.1



^ permalink raw reply	[flat|nested] 36+ messages in thread

* [PATCH 0/4] Add Toshiba Visconti DNN image processing accelerator driver
@ 2022-04-28 13:11 ` Yuji Ishikawa
  0 siblings, 0 replies; 36+ messages in thread
From: Yuji Ishikawa @ 2022-04-28 13:11 UTC (permalink / raw)
  To: Rob Herring, Nobuhiro Iwamatsu, Sumit Semwal, Christian König
  Cc: linux-arm-kernel, linux-kernel, linux-media, dri-devel,
	linaro-mm-sig, yuji2.ishikawa

This series is the DNN image processing accelerator driver for Toshiba's ARM SoC, Visconti[0].
This provides DT binding documentation, device driver, MAINTAINER files.

The second patch "soc: visconti: Add Toshiba Visconti image processing accelerator common source"
and the fourth patch "MAINTAINERS: ..." are the same as the ones in the preceding post for affine driver.

Best regards,
Yuji

[0]: https://toshiba.semicon-storage.com/ap-en/semiconductor/product/image-recognition-processors-visconti.html

Yuji Ishikawa (4):
  dt-bindings: soc: visconti: Add Toshiba Visconti DNN image processing
    accelerator bindings
  soc: visconti: Add Toshiba Visconti image processing accelerator
    common source
  soc: visconti: Add Toshiba Visconti DNN image processing accelerator
  MAINTAINERS: Add entries for Toshiba Visconti DNN image processing
    accelerator

 .../soc/visconti/toshiba,visconti-dnn.yaml    |  54 ++
 MAINTAINERS                                   |   2 +
 drivers/soc/Kconfig                           |   1 +
 drivers/soc/Makefile                          |   1 +
 drivers/soc/visconti/Kconfig                  |   7 +
 drivers/soc/visconti/Makefile                 |   8 +
 drivers/soc/visconti/dnn/Makefile             |   6 +
 drivers/soc/visconti/dnn/dnn.c                | 533 ++++++++++++++++++
 drivers/soc/visconti/dnn/hwd_dnn.c            | 183 ++++++
 drivers/soc/visconti/dnn/hwd_dnn.h            |  68 +++
 drivers/soc/visconti/dnn/hwd_dnn_reg.h        | 228 ++++++++
 drivers/soc/visconti/ipa_common.c             |  55 ++
 drivers/soc/visconti/ipa_common.h             |  18 +
 drivers/soc/visconti/uapi/dnn.h               |  77 +++
 drivers/soc/visconti/uapi/ipa.h               |  88 +++
 15 files changed, 1329 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.yaml
 create mode 100644 drivers/soc/visconti/Kconfig
 create mode 100644 drivers/soc/visconti/Makefile
 create mode 100644 drivers/soc/visconti/dnn/Makefile
 create mode 100644 drivers/soc/visconti/dnn/dnn.c
 create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.c
 create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.h
 create mode 100644 drivers/soc/visconti/dnn/hwd_dnn_reg.h
 create mode 100644 drivers/soc/visconti/ipa_common.c
 create mode 100644 drivers/soc/visconti/ipa_common.h
 create mode 100644 drivers/soc/visconti/uapi/dnn.h
 create mode 100644 drivers/soc/visconti/uapi/ipa.h

-- 
2.17.1



^ permalink raw reply	[flat|nested] 36+ messages in thread

* [PATCH 0/4] Add Toshiba Visconti DNN image processing accelerator driver
@ 2022-04-28 13:11 ` Yuji Ishikawa
  0 siblings, 0 replies; 36+ messages in thread
From: Yuji Ishikawa @ 2022-04-28 13:11 UTC (permalink / raw)
  To: Rob Herring, Nobuhiro Iwamatsu, Sumit Semwal, Christian König
  Cc: linux-arm-kernel, linux-kernel, linux-media, dri-devel,
	linaro-mm-sig, yuji2.ishikawa

This series is the DNN image processing accelerator driver for Toshiba's ARM SoC, Visconti[0].
This provides DT binding documentation, device driver, MAINTAINER files.

The second patch "soc: visconti: Add Toshiba Visconti image processing accelerator common source"
and the fourth patch "MAINTAINERS: ..." are the same as the ones in the preceding post for affine driver.

Best regards,
Yuji

[0]: https://toshiba.semicon-storage.com/ap-en/semiconductor/product/image-recognition-processors-visconti.html

Yuji Ishikawa (4):
  dt-bindings: soc: visconti: Add Toshiba Visconti DNN image processing
    accelerator bindings
  soc: visconti: Add Toshiba Visconti image processing accelerator
    common source
  soc: visconti: Add Toshiba Visconti DNN image processing accelerator
  MAINTAINERS: Add entries for Toshiba Visconti DNN image processing
    accelerator

 .../soc/visconti/toshiba,visconti-dnn.yaml    |  54 ++
 MAINTAINERS                                   |   2 +
 drivers/soc/Kconfig                           |   1 +
 drivers/soc/Makefile                          |   1 +
 drivers/soc/visconti/Kconfig                  |   7 +
 drivers/soc/visconti/Makefile                 |   8 +
 drivers/soc/visconti/dnn/Makefile             |   6 +
 drivers/soc/visconti/dnn/dnn.c                | 533 ++++++++++++++++++
 drivers/soc/visconti/dnn/hwd_dnn.c            | 183 ++++++
 drivers/soc/visconti/dnn/hwd_dnn.h            |  68 +++
 drivers/soc/visconti/dnn/hwd_dnn_reg.h        | 228 ++++++++
 drivers/soc/visconti/ipa_common.c             |  55 ++
 drivers/soc/visconti/ipa_common.h             |  18 +
 drivers/soc/visconti/uapi/dnn.h               |  77 +++
 drivers/soc/visconti/uapi/ipa.h               |  88 +++
 15 files changed, 1329 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.yaml
 create mode 100644 drivers/soc/visconti/Kconfig
 create mode 100644 drivers/soc/visconti/Makefile
 create mode 100644 drivers/soc/visconti/dnn/Makefile
 create mode 100644 drivers/soc/visconti/dnn/dnn.c
 create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.c
 create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.h
 create mode 100644 drivers/soc/visconti/dnn/hwd_dnn_reg.h
 create mode 100644 drivers/soc/visconti/ipa_common.c
 create mode 100644 drivers/soc/visconti/ipa_common.h
 create mode 100644 drivers/soc/visconti/uapi/dnn.h
 create mode 100644 drivers/soc/visconti/uapi/ipa.h

-- 
2.17.1



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 36+ messages in thread

* [PATCH 1/4] dt-bindings: soc: visconti: Add Toshiba Visconti DNN image processing accelerator bindings
  2022-04-28 13:11 ` Yuji Ishikawa
  (?)
@ 2022-04-28 13:11   ` Yuji Ishikawa
  -1 siblings, 0 replies; 36+ messages in thread
From: Yuji Ishikawa @ 2022-04-28 13:11 UTC (permalink / raw)
  To: Rob Herring, Nobuhiro Iwamatsu, Sumit Semwal, Christian König
  Cc: linux-kernel, dri-devel, linaro-mm-sig, yuji2.ishikawa,
	linux-arm-kernel, linux-media

This commit adds the Device Tree binding documentation that allows to describe
the DNN image processing accelerator found in Toshiba Visconti SoCs.

Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
---
 .../soc/visconti/toshiba,visconti-dnn.yaml    | 54 +++++++++++++++++++
 1 file changed, 54 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.yaml

diff --git a/Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.yaml b/Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.yaml
new file mode 100644
index 000000000..28576a55e
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.yaml
@@ -0,0 +1,54 @@
+# SPDX-LIcense-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/visconti/toshiba,visconti-dnn.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti DNN image processing accelerator
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+description: |
+  Toshiba Visconti DNN image processing accelerator.
+  Visconti5 have up to 2 DNN units.
+
+properties:
+  compatible:
+    items:
+      - const: toshiba,visconti-dnn
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  index:
+    enum: [0, 1]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - index
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dnn0: dnn@14280000 {
+            compatible = "toshiba,visconti-dnn";
+            reg = <0 0x14280000 0 0x8000>;
+            interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+            index = <0>;
+            status = "disabled";
+        };
+    };
-- 
2.17.1



^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [PATCH 1/4] dt-bindings: soc: visconti: Add Toshiba Visconti DNN image processing accelerator bindings
@ 2022-04-28 13:11   ` Yuji Ishikawa
  0 siblings, 0 replies; 36+ messages in thread
From: Yuji Ishikawa @ 2022-04-28 13:11 UTC (permalink / raw)
  To: Rob Herring, Nobuhiro Iwamatsu, Sumit Semwal, Christian König
  Cc: linux-arm-kernel, linux-kernel, linux-media, dri-devel,
	linaro-mm-sig, yuji2.ishikawa

This commit adds the Device Tree binding documentation that allows to describe
the DNN image processing accelerator found in Toshiba Visconti SoCs.

Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
---
 .../soc/visconti/toshiba,visconti-dnn.yaml    | 54 +++++++++++++++++++
 1 file changed, 54 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.yaml

diff --git a/Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.yaml b/Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.yaml
new file mode 100644
index 000000000..28576a55e
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.yaml
@@ -0,0 +1,54 @@
+# SPDX-LIcense-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/visconti/toshiba,visconti-dnn.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti DNN image processing accelerator
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+description: |
+  Toshiba Visconti DNN image processing accelerator.
+  Visconti5 have up to 2 DNN units.
+
+properties:
+  compatible:
+    items:
+      - const: toshiba,visconti-dnn
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  index:
+    enum: [0, 1]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - index
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dnn0: dnn@14280000 {
+            compatible = "toshiba,visconti-dnn";
+            reg = <0 0x14280000 0 0x8000>;
+            interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+            index = <0>;
+            status = "disabled";
+        };
+    };
-- 
2.17.1



^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [PATCH 1/4] dt-bindings: soc: visconti: Add Toshiba Visconti DNN image processing accelerator bindings
@ 2022-04-28 13:11   ` Yuji Ishikawa
  0 siblings, 0 replies; 36+ messages in thread
From: Yuji Ishikawa @ 2022-04-28 13:11 UTC (permalink / raw)
  To: Rob Herring, Nobuhiro Iwamatsu, Sumit Semwal, Christian König
  Cc: linux-arm-kernel, linux-kernel, linux-media, dri-devel,
	linaro-mm-sig, yuji2.ishikawa

This commit adds the Device Tree binding documentation that allows to describe
the DNN image processing accelerator found in Toshiba Visconti SoCs.

Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
---
 .../soc/visconti/toshiba,visconti-dnn.yaml    | 54 +++++++++++++++++++
 1 file changed, 54 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.yaml

diff --git a/Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.yaml b/Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.yaml
new file mode 100644
index 000000000..28576a55e
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.yaml
@@ -0,0 +1,54 @@
+# SPDX-LIcense-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/visconti/toshiba,visconti-dnn.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba Visconti DNN image processing accelerator
+
+maintainers:
+  - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+
+description: |
+  Toshiba Visconti DNN image processing accelerator.
+  Visconti5 have up to 2 DNN units.
+
+properties:
+  compatible:
+    items:
+      - const: toshiba,visconti-dnn
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  index:
+    enum: [0, 1]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - index
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        dnn0: dnn@14280000 {
+            compatible = "toshiba,visconti-dnn";
+            reg = <0 0x14280000 0 0x8000>;
+            interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+            index = <0>;
+            status = "disabled";
+        };
+    };
-- 
2.17.1



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [PATCH 2/4] soc: visconti: Add Toshiba Visconti image processing accelerator common source
  2022-04-28 13:11 ` Yuji Ishikawa
  (?)
@ 2022-04-28 13:11   ` Yuji Ishikawa
  -1 siblings, 0 replies; 36+ messages in thread
From: Yuji Ishikawa @ 2022-04-28 13:11 UTC (permalink / raw)
  To: Rob Herring, Nobuhiro Iwamatsu, Sumit Semwal, Christian König
  Cc: linux-arm-kernel, linux-kernel, linux-media, dri-devel,
	linaro-mm-sig, yuji2.ishikawa

This commit adds common definitions shared among image processing accelerator drivers
for Toshiba Visconti SoCs.

Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
---
 drivers/soc/Kconfig               |  1 +
 drivers/soc/Makefile              |  1 +
 drivers/soc/visconti/Kconfig      |  1 +
 drivers/soc/visconti/Makefile     |  6 +++
 drivers/soc/visconti/ipa_common.c | 55 +++++++++++++++++++
 drivers/soc/visconti/ipa_common.h | 18 +++++++
 drivers/soc/visconti/uapi/ipa.h   | 88 +++++++++++++++++++++++++++++++
 7 files changed, 170 insertions(+)
 create mode 100644 drivers/soc/visconti/Kconfig
 create mode 100644 drivers/soc/visconti/Makefile
 create mode 100644 drivers/soc/visconti/ipa_common.c
 create mode 100644 drivers/soc/visconti/ipa_common.h
 create mode 100644 drivers/soc/visconti/uapi/ipa.h

diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index e8a30c4c5..c99139aa8 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -22,6 +22,7 @@ source "drivers/soc/tegra/Kconfig"
 source "drivers/soc/ti/Kconfig"
 source "drivers/soc/ux500/Kconfig"
 source "drivers/soc/versatile/Kconfig"
+source "drivers/soc/visconti/Kconfig"
 source "drivers/soc/xilinx/Kconfig"
 
 endmenu
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index a05e9fbcd..455b993c2 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -28,4 +28,5 @@ obj-$(CONFIG_ARCH_TEGRA)	+= tegra/
 obj-y				+= ti/
 obj-$(CONFIG_ARCH_U8500)	+= ux500/
 obj-$(CONFIG_PLAT_VERSATILE)	+= versatile/
+obj-$(CONFIG_ARCH_VISCONTI)	+= visconti/
 obj-y				+= xilinx/
diff --git a/drivers/soc/visconti/Kconfig b/drivers/soc/visconti/Kconfig
new file mode 100644
index 000000000..8b1378917
--- /dev/null
+++ b/drivers/soc/visconti/Kconfig
@@ -0,0 +1 @@
+
diff --git a/drivers/soc/visconti/Makefile b/drivers/soc/visconti/Makefile
new file mode 100644
index 000000000..8d710da08
--- /dev/null
+++ b/drivers/soc/visconti/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the Visconti specific device drivers.
+#
+
+obj-y += ipa_common.o
diff --git a/drivers/soc/visconti/ipa_common.c b/drivers/soc/visconti/ipa_common.c
new file mode 100644
index 000000000..6345f33c5
--- /dev/null
+++ b/drivers/soc/visconti/ipa_common.c
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+/* Toshiba Visconti Image Processing Accelerator Support
+ *
+ * (C) Copyright 2022 TOSHIBA CORPORATION
+ * (C) Copyright 2022 Toshiba Electronic Devices & Storage Corporation
+ */
+
+#include "ipa_common.h"
+
+int ipa_attach_dmabuf(struct device *dev, int fd, struct dma_buf_attachment **a,
+		      struct sg_table **s, dma_addr_t *addr, enum dma_data_direction dma_dir)
+{
+	struct dma_buf_attachment *attachment;
+	struct dma_buf *dmabuf;
+	struct sg_table *sgt;
+	int ret;
+
+	dmabuf = dma_buf_get(fd);
+	if (IS_ERR(dmabuf)) {
+		dev_err(dev, "Invalid dmabuf FD\n");
+		return PTR_ERR(dmabuf);
+	}
+	attachment = dma_buf_attach(dmabuf, dev);
+
+	if (IS_ERR(attachment)) {
+		dev_err(dev, "Failed to attach dmabuf\n");
+		ret = PTR_ERR(attachment);
+		goto err_put;
+	}
+	sgt = dma_buf_map_attachment(attachment, dma_dir);
+	if (IS_ERR(sgt)) {
+		dev_err(dev, "Failed to get dmabufs sg_table\n");
+		ret = PTR_ERR(sgt);
+		goto err_detach;
+	}
+	if (sgt->nents != 1) {
+		dev_err(dev, "Sparse DMA region is unsupported\n");
+		ret = -EINVAL;
+		goto err_unmap;
+	}
+
+	*addr = sg_dma_address(sgt->sgl);
+	*a = attachment;
+	*s = sgt;
+
+	return 0;
+
+err_unmap:
+	dma_buf_unmap_attachment(attachment, sgt, dma_dir);
+err_detach:
+	dma_buf_detach(dmabuf, attachment);
+err_put:
+	dma_buf_put(dmabuf);
+	return ret;
+}
diff --git a/drivers/soc/visconti/ipa_common.h b/drivers/soc/visconti/ipa_common.h
new file mode 100644
index 000000000..786988c52
--- /dev/null
+++ b/drivers/soc/visconti/ipa_common.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */
+/* Toshiba Visconti Image Processing Accelerator Support
+ *
+ * (C) Copyright 2022 TOSHIBA CORPORATION
+ * (C) Copyright 2022 Toshiba Electronic Devices & Storage Corporation
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/dma-buf.h>
+
+#define COHERENT_ADDRESS_BIT   (0x400000000ULL)
+#define IPA_POLL_EVENT_NONE    (0)
+#define IPA_POLL_EVENT_DONE    (1)
+#define IPA_POLL_EVENT_ERROR   (2)
+#define IPA_WAKEUP_RETRY_DELAY (300 * 1000) /*usec*/
+
+int ipa_attach_dmabuf(struct device *dev, int fd, struct dma_buf_attachment **a,
+		      struct sg_table **s, dma_addr_t *addr, enum dma_data_direction dma_dir);
diff --git a/drivers/soc/visconti/uapi/ipa.h b/drivers/soc/visconti/uapi/ipa.h
new file mode 100644
index 000000000..e5c919ea2
--- /dev/null
+++ b/drivers/soc/visconti/uapi/ipa.h
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/* Toshiba Visconti Image Processing Accelerator Support
+ *
+ * (C) Copyright 2022 TOSHIBA CORPORATION
+ * (C) Copyright 2022 Toshiba Electronic Devices & Storage Corporation
+ */
+
+#ifndef _UAPI_LINUX_IPA_H
+#define _UAPI_LINUX_IPA_H
+
+/**
+ * enum drv_ipa_state - state of Visconti IPA driver
+ *
+ * @DRV_IPA_STATE_IDLE:     driver is idle
+ * @DRV_IPA_STATE_BUSY:     device is busy
+ */
+enum drv_ipa_state { DRV_IPA_STATE_IDLE = 0, DRV_IPA_STATE_BUSY };
+
+/**
+ * enum drv_ipa_buffer_direction - usage of buffer
+ *
+ * @DRV_IPA_DIR_BIDIRECTION: cpu writes/reads data
+ * @DRV_IPA_DIR_TO_DEVICE:   cpu writes data
+ * @DRV_IPA_DIR_FROM_DEVICE: cpu reads data
+ * @DRV_IPA_DIR_NONE:        cpu not access or non-coherent
+ */
+enum drv_ipa_buffer_direction {
+	DRV_IPA_DIR_BIDIRECTION = 0,
+	DRV_IPA_DIR_TO_DEVICE,
+	DRV_IPA_DIR_FROM_DEVICE,
+	DRV_IPA_DIR_NONE
+};
+
+/**
+ * struct drv_ipa_buffer_info - buffer information for Visconti IPA drivers
+ *
+ * @fd:        file descriptor of Ion allocated heap
+ * @coherent:  allocated via coherent bus or not
+ * @direction: buffer direction (to/from device)
+ *
+ * note: When the Ion heap is allocated wit ION_FLAG_CACHED,
+ * &struct drv_ipa_buffer_info.coherent should be true.
+ * Else, it should be false.
+ */
+struct drv_ipa_buffer_info {
+	u32 fd;
+	bool coherent;
+	enum drv_ipa_buffer_direction direction;
+};
+
+/**
+ * struct drv_ipa_addr - address structure for Visconti IPA drivers
+ *
+ * @buffer_index: array index of &struct drv_ipa_buffer_info
+ * @offset:       offset from the top of Ion heap
+ */
+struct drv_ipa_addr {
+	u32 buffer_index : 4;
+	u32 offset : 28;
+};
+
+#define IPA_BUFFER_INDEX_MAX (16)
+#define IPA_INVALID_ADDR                                                                           \
+	{                                                                                          \
+		.buffer_index = 0xfu, .offset = 0xfffffffu                                         \
+	}
+
+static inline struct drv_ipa_addr drv_ipa_invalid_addr(void)
+{
+	struct drv_ipa_addr invalid_addr = IPA_INVALID_ADDR;
+	return invalid_addr;
+}
+
+static inline bool drv_ipa_is_invalid_addr(struct drv_ipa_addr addr)
+{
+	struct drv_ipa_addr invalid_addr = IPA_INVALID_ADDR;
+
+	if (addr.buffer_index == invalid_addr.buffer_index && addr.offset == invalid_addr.offset) {
+		return true;
+	}
+	return false;
+}
+
+#define IOC_IPA_MAGIC	   'I'
+#define IOC_IPA_START	   _IO(IOC_IPA_MAGIC, 0)
+#define IOC_IPA_GET_STATUS _IO(IOC_IPA_MAGIC, 1)
+
+#endif /* _UAPI_LINUX_IPA_H */
-- 
2.17.1



^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [PATCH 2/4] soc: visconti: Add Toshiba Visconti image processing accelerator common source
@ 2022-04-28 13:11   ` Yuji Ishikawa
  0 siblings, 0 replies; 36+ messages in thread
From: Yuji Ishikawa @ 2022-04-28 13:11 UTC (permalink / raw)
  To: Rob Herring, Nobuhiro Iwamatsu, Sumit Semwal, Christian König
  Cc: linux-kernel, dri-devel, linaro-mm-sig, yuji2.ishikawa,
	linux-arm-kernel, linux-media

This commit adds common definitions shared among image processing accelerator drivers
for Toshiba Visconti SoCs.

Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
---
 drivers/soc/Kconfig               |  1 +
 drivers/soc/Makefile              |  1 +
 drivers/soc/visconti/Kconfig      |  1 +
 drivers/soc/visconti/Makefile     |  6 +++
 drivers/soc/visconti/ipa_common.c | 55 +++++++++++++++++++
 drivers/soc/visconti/ipa_common.h | 18 +++++++
 drivers/soc/visconti/uapi/ipa.h   | 88 +++++++++++++++++++++++++++++++
 7 files changed, 170 insertions(+)
 create mode 100644 drivers/soc/visconti/Kconfig
 create mode 100644 drivers/soc/visconti/Makefile
 create mode 100644 drivers/soc/visconti/ipa_common.c
 create mode 100644 drivers/soc/visconti/ipa_common.h
 create mode 100644 drivers/soc/visconti/uapi/ipa.h

diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index e8a30c4c5..c99139aa8 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -22,6 +22,7 @@ source "drivers/soc/tegra/Kconfig"
 source "drivers/soc/ti/Kconfig"
 source "drivers/soc/ux500/Kconfig"
 source "drivers/soc/versatile/Kconfig"
+source "drivers/soc/visconti/Kconfig"
 source "drivers/soc/xilinx/Kconfig"
 
 endmenu
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index a05e9fbcd..455b993c2 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -28,4 +28,5 @@ obj-$(CONFIG_ARCH_TEGRA)	+= tegra/
 obj-y				+= ti/
 obj-$(CONFIG_ARCH_U8500)	+= ux500/
 obj-$(CONFIG_PLAT_VERSATILE)	+= versatile/
+obj-$(CONFIG_ARCH_VISCONTI)	+= visconti/
 obj-y				+= xilinx/
diff --git a/drivers/soc/visconti/Kconfig b/drivers/soc/visconti/Kconfig
new file mode 100644
index 000000000..8b1378917
--- /dev/null
+++ b/drivers/soc/visconti/Kconfig
@@ -0,0 +1 @@
+
diff --git a/drivers/soc/visconti/Makefile b/drivers/soc/visconti/Makefile
new file mode 100644
index 000000000..8d710da08
--- /dev/null
+++ b/drivers/soc/visconti/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the Visconti specific device drivers.
+#
+
+obj-y += ipa_common.o
diff --git a/drivers/soc/visconti/ipa_common.c b/drivers/soc/visconti/ipa_common.c
new file mode 100644
index 000000000..6345f33c5
--- /dev/null
+++ b/drivers/soc/visconti/ipa_common.c
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+/* Toshiba Visconti Image Processing Accelerator Support
+ *
+ * (C) Copyright 2022 TOSHIBA CORPORATION
+ * (C) Copyright 2022 Toshiba Electronic Devices & Storage Corporation
+ */
+
+#include "ipa_common.h"
+
+int ipa_attach_dmabuf(struct device *dev, int fd, struct dma_buf_attachment **a,
+		      struct sg_table **s, dma_addr_t *addr, enum dma_data_direction dma_dir)
+{
+	struct dma_buf_attachment *attachment;
+	struct dma_buf *dmabuf;
+	struct sg_table *sgt;
+	int ret;
+
+	dmabuf = dma_buf_get(fd);
+	if (IS_ERR(dmabuf)) {
+		dev_err(dev, "Invalid dmabuf FD\n");
+		return PTR_ERR(dmabuf);
+	}
+	attachment = dma_buf_attach(dmabuf, dev);
+
+	if (IS_ERR(attachment)) {
+		dev_err(dev, "Failed to attach dmabuf\n");
+		ret = PTR_ERR(attachment);
+		goto err_put;
+	}
+	sgt = dma_buf_map_attachment(attachment, dma_dir);
+	if (IS_ERR(sgt)) {
+		dev_err(dev, "Failed to get dmabufs sg_table\n");
+		ret = PTR_ERR(sgt);
+		goto err_detach;
+	}
+	if (sgt->nents != 1) {
+		dev_err(dev, "Sparse DMA region is unsupported\n");
+		ret = -EINVAL;
+		goto err_unmap;
+	}
+
+	*addr = sg_dma_address(sgt->sgl);
+	*a = attachment;
+	*s = sgt;
+
+	return 0;
+
+err_unmap:
+	dma_buf_unmap_attachment(attachment, sgt, dma_dir);
+err_detach:
+	dma_buf_detach(dmabuf, attachment);
+err_put:
+	dma_buf_put(dmabuf);
+	return ret;
+}
diff --git a/drivers/soc/visconti/ipa_common.h b/drivers/soc/visconti/ipa_common.h
new file mode 100644
index 000000000..786988c52
--- /dev/null
+++ b/drivers/soc/visconti/ipa_common.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */
+/* Toshiba Visconti Image Processing Accelerator Support
+ *
+ * (C) Copyright 2022 TOSHIBA CORPORATION
+ * (C) Copyright 2022 Toshiba Electronic Devices & Storage Corporation
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/dma-buf.h>
+
+#define COHERENT_ADDRESS_BIT   (0x400000000ULL)
+#define IPA_POLL_EVENT_NONE    (0)
+#define IPA_POLL_EVENT_DONE    (1)
+#define IPA_POLL_EVENT_ERROR   (2)
+#define IPA_WAKEUP_RETRY_DELAY (300 * 1000) /*usec*/
+
+int ipa_attach_dmabuf(struct device *dev, int fd, struct dma_buf_attachment **a,
+		      struct sg_table **s, dma_addr_t *addr, enum dma_data_direction dma_dir);
diff --git a/drivers/soc/visconti/uapi/ipa.h b/drivers/soc/visconti/uapi/ipa.h
new file mode 100644
index 000000000..e5c919ea2
--- /dev/null
+++ b/drivers/soc/visconti/uapi/ipa.h
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/* Toshiba Visconti Image Processing Accelerator Support
+ *
+ * (C) Copyright 2022 TOSHIBA CORPORATION
+ * (C) Copyright 2022 Toshiba Electronic Devices & Storage Corporation
+ */
+
+#ifndef _UAPI_LINUX_IPA_H
+#define _UAPI_LINUX_IPA_H
+
+/**
+ * enum drv_ipa_state - state of Visconti IPA driver
+ *
+ * @DRV_IPA_STATE_IDLE:     driver is idle
+ * @DRV_IPA_STATE_BUSY:     device is busy
+ */
+enum drv_ipa_state { DRV_IPA_STATE_IDLE = 0, DRV_IPA_STATE_BUSY };
+
+/**
+ * enum drv_ipa_buffer_direction - usage of buffer
+ *
+ * @DRV_IPA_DIR_BIDIRECTION: cpu writes/reads data
+ * @DRV_IPA_DIR_TO_DEVICE:   cpu writes data
+ * @DRV_IPA_DIR_FROM_DEVICE: cpu reads data
+ * @DRV_IPA_DIR_NONE:        cpu not access or non-coherent
+ */
+enum drv_ipa_buffer_direction {
+	DRV_IPA_DIR_BIDIRECTION = 0,
+	DRV_IPA_DIR_TO_DEVICE,
+	DRV_IPA_DIR_FROM_DEVICE,
+	DRV_IPA_DIR_NONE
+};
+
+/**
+ * struct drv_ipa_buffer_info - buffer information for Visconti IPA drivers
+ *
+ * @fd:        file descriptor of Ion allocated heap
+ * @coherent:  allocated via coherent bus or not
+ * @direction: buffer direction (to/from device)
+ *
+ * note: When the Ion heap is allocated wit ION_FLAG_CACHED,
+ * &struct drv_ipa_buffer_info.coherent should be true.
+ * Else, it should be false.
+ */
+struct drv_ipa_buffer_info {
+	u32 fd;
+	bool coherent;
+	enum drv_ipa_buffer_direction direction;
+};
+
+/**
+ * struct drv_ipa_addr - address structure for Visconti IPA drivers
+ *
+ * @buffer_index: array index of &struct drv_ipa_buffer_info
+ * @offset:       offset from the top of Ion heap
+ */
+struct drv_ipa_addr {
+	u32 buffer_index : 4;
+	u32 offset : 28;
+};
+
+#define IPA_BUFFER_INDEX_MAX (16)
+#define IPA_INVALID_ADDR                                                                           \
+	{                                                                                          \
+		.buffer_index = 0xfu, .offset = 0xfffffffu                                         \
+	}
+
+static inline struct drv_ipa_addr drv_ipa_invalid_addr(void)
+{
+	struct drv_ipa_addr invalid_addr = IPA_INVALID_ADDR;
+	return invalid_addr;
+}
+
+static inline bool drv_ipa_is_invalid_addr(struct drv_ipa_addr addr)
+{
+	struct drv_ipa_addr invalid_addr = IPA_INVALID_ADDR;
+
+	if (addr.buffer_index == invalid_addr.buffer_index && addr.offset == invalid_addr.offset) {
+		return true;
+	}
+	return false;
+}
+
+#define IOC_IPA_MAGIC	   'I'
+#define IOC_IPA_START	   _IO(IOC_IPA_MAGIC, 0)
+#define IOC_IPA_GET_STATUS _IO(IOC_IPA_MAGIC, 1)
+
+#endif /* _UAPI_LINUX_IPA_H */
-- 
2.17.1



^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [PATCH 2/4] soc: visconti: Add Toshiba Visconti image processing accelerator common source
@ 2022-04-28 13:11   ` Yuji Ishikawa
  0 siblings, 0 replies; 36+ messages in thread
From: Yuji Ishikawa @ 2022-04-28 13:11 UTC (permalink / raw)
  To: Rob Herring, Nobuhiro Iwamatsu, Sumit Semwal, Christian König
  Cc: linux-arm-kernel, linux-kernel, linux-media, dri-devel,
	linaro-mm-sig, yuji2.ishikawa

This commit adds common definitions shared among image processing accelerator drivers
for Toshiba Visconti SoCs.

Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
---
 drivers/soc/Kconfig               |  1 +
 drivers/soc/Makefile              |  1 +
 drivers/soc/visconti/Kconfig      |  1 +
 drivers/soc/visconti/Makefile     |  6 +++
 drivers/soc/visconti/ipa_common.c | 55 +++++++++++++++++++
 drivers/soc/visconti/ipa_common.h | 18 +++++++
 drivers/soc/visconti/uapi/ipa.h   | 88 +++++++++++++++++++++++++++++++
 7 files changed, 170 insertions(+)
 create mode 100644 drivers/soc/visconti/Kconfig
 create mode 100644 drivers/soc/visconti/Makefile
 create mode 100644 drivers/soc/visconti/ipa_common.c
 create mode 100644 drivers/soc/visconti/ipa_common.h
 create mode 100644 drivers/soc/visconti/uapi/ipa.h

diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index e8a30c4c5..c99139aa8 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -22,6 +22,7 @@ source "drivers/soc/tegra/Kconfig"
 source "drivers/soc/ti/Kconfig"
 source "drivers/soc/ux500/Kconfig"
 source "drivers/soc/versatile/Kconfig"
+source "drivers/soc/visconti/Kconfig"
 source "drivers/soc/xilinx/Kconfig"
 
 endmenu
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index a05e9fbcd..455b993c2 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -28,4 +28,5 @@ obj-$(CONFIG_ARCH_TEGRA)	+= tegra/
 obj-y				+= ti/
 obj-$(CONFIG_ARCH_U8500)	+= ux500/
 obj-$(CONFIG_PLAT_VERSATILE)	+= versatile/
+obj-$(CONFIG_ARCH_VISCONTI)	+= visconti/
 obj-y				+= xilinx/
diff --git a/drivers/soc/visconti/Kconfig b/drivers/soc/visconti/Kconfig
new file mode 100644
index 000000000..8b1378917
--- /dev/null
+++ b/drivers/soc/visconti/Kconfig
@@ -0,0 +1 @@
+
diff --git a/drivers/soc/visconti/Makefile b/drivers/soc/visconti/Makefile
new file mode 100644
index 000000000..8d710da08
--- /dev/null
+++ b/drivers/soc/visconti/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the Visconti specific device drivers.
+#
+
+obj-y += ipa_common.o
diff --git a/drivers/soc/visconti/ipa_common.c b/drivers/soc/visconti/ipa_common.c
new file mode 100644
index 000000000..6345f33c5
--- /dev/null
+++ b/drivers/soc/visconti/ipa_common.c
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+/* Toshiba Visconti Image Processing Accelerator Support
+ *
+ * (C) Copyright 2022 TOSHIBA CORPORATION
+ * (C) Copyright 2022 Toshiba Electronic Devices & Storage Corporation
+ */
+
+#include "ipa_common.h"
+
+int ipa_attach_dmabuf(struct device *dev, int fd, struct dma_buf_attachment **a,
+		      struct sg_table **s, dma_addr_t *addr, enum dma_data_direction dma_dir)
+{
+	struct dma_buf_attachment *attachment;
+	struct dma_buf *dmabuf;
+	struct sg_table *sgt;
+	int ret;
+
+	dmabuf = dma_buf_get(fd);
+	if (IS_ERR(dmabuf)) {
+		dev_err(dev, "Invalid dmabuf FD\n");
+		return PTR_ERR(dmabuf);
+	}
+	attachment = dma_buf_attach(dmabuf, dev);
+
+	if (IS_ERR(attachment)) {
+		dev_err(dev, "Failed to attach dmabuf\n");
+		ret = PTR_ERR(attachment);
+		goto err_put;
+	}
+	sgt = dma_buf_map_attachment(attachment, dma_dir);
+	if (IS_ERR(sgt)) {
+		dev_err(dev, "Failed to get dmabufs sg_table\n");
+		ret = PTR_ERR(sgt);
+		goto err_detach;
+	}
+	if (sgt->nents != 1) {
+		dev_err(dev, "Sparse DMA region is unsupported\n");
+		ret = -EINVAL;
+		goto err_unmap;
+	}
+
+	*addr = sg_dma_address(sgt->sgl);
+	*a = attachment;
+	*s = sgt;
+
+	return 0;
+
+err_unmap:
+	dma_buf_unmap_attachment(attachment, sgt, dma_dir);
+err_detach:
+	dma_buf_detach(dmabuf, attachment);
+err_put:
+	dma_buf_put(dmabuf);
+	return ret;
+}
diff --git a/drivers/soc/visconti/ipa_common.h b/drivers/soc/visconti/ipa_common.h
new file mode 100644
index 000000000..786988c52
--- /dev/null
+++ b/drivers/soc/visconti/ipa_common.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */
+/* Toshiba Visconti Image Processing Accelerator Support
+ *
+ * (C) Copyright 2022 TOSHIBA CORPORATION
+ * (C) Copyright 2022 Toshiba Electronic Devices & Storage Corporation
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/dma-buf.h>
+
+#define COHERENT_ADDRESS_BIT   (0x400000000ULL)
+#define IPA_POLL_EVENT_NONE    (0)
+#define IPA_POLL_EVENT_DONE    (1)
+#define IPA_POLL_EVENT_ERROR   (2)
+#define IPA_WAKEUP_RETRY_DELAY (300 * 1000) /*usec*/
+
+int ipa_attach_dmabuf(struct device *dev, int fd, struct dma_buf_attachment **a,
+		      struct sg_table **s, dma_addr_t *addr, enum dma_data_direction dma_dir);
diff --git a/drivers/soc/visconti/uapi/ipa.h b/drivers/soc/visconti/uapi/ipa.h
new file mode 100644
index 000000000..e5c919ea2
--- /dev/null
+++ b/drivers/soc/visconti/uapi/ipa.h
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/* Toshiba Visconti Image Processing Accelerator Support
+ *
+ * (C) Copyright 2022 TOSHIBA CORPORATION
+ * (C) Copyright 2022 Toshiba Electronic Devices & Storage Corporation
+ */
+
+#ifndef _UAPI_LINUX_IPA_H
+#define _UAPI_LINUX_IPA_H
+
+/**
+ * enum drv_ipa_state - state of Visconti IPA driver
+ *
+ * @DRV_IPA_STATE_IDLE:     driver is idle
+ * @DRV_IPA_STATE_BUSY:     device is busy
+ */
+enum drv_ipa_state { DRV_IPA_STATE_IDLE = 0, DRV_IPA_STATE_BUSY };
+
+/**
+ * enum drv_ipa_buffer_direction - usage of buffer
+ *
+ * @DRV_IPA_DIR_BIDIRECTION: cpu writes/reads data
+ * @DRV_IPA_DIR_TO_DEVICE:   cpu writes data
+ * @DRV_IPA_DIR_FROM_DEVICE: cpu reads data
+ * @DRV_IPA_DIR_NONE:        cpu not access or non-coherent
+ */
+enum drv_ipa_buffer_direction {
+	DRV_IPA_DIR_BIDIRECTION = 0,
+	DRV_IPA_DIR_TO_DEVICE,
+	DRV_IPA_DIR_FROM_DEVICE,
+	DRV_IPA_DIR_NONE
+};
+
+/**
+ * struct drv_ipa_buffer_info - buffer information for Visconti IPA drivers
+ *
+ * @fd:        file descriptor of Ion allocated heap
+ * @coherent:  allocated via coherent bus or not
+ * @direction: buffer direction (to/from device)
+ *
+ * note: When the Ion heap is allocated wit ION_FLAG_CACHED,
+ * &struct drv_ipa_buffer_info.coherent should be true.
+ * Else, it should be false.
+ */
+struct drv_ipa_buffer_info {
+	u32 fd;
+	bool coherent;
+	enum drv_ipa_buffer_direction direction;
+};
+
+/**
+ * struct drv_ipa_addr - address structure for Visconti IPA drivers
+ *
+ * @buffer_index: array index of &struct drv_ipa_buffer_info
+ * @offset:       offset from the top of Ion heap
+ */
+struct drv_ipa_addr {
+	u32 buffer_index : 4;
+	u32 offset : 28;
+};
+
+#define IPA_BUFFER_INDEX_MAX (16)
+#define IPA_INVALID_ADDR                                                                           \
+	{                                                                                          \
+		.buffer_index = 0xfu, .offset = 0xfffffffu                                         \
+	}
+
+static inline struct drv_ipa_addr drv_ipa_invalid_addr(void)
+{
+	struct drv_ipa_addr invalid_addr = IPA_INVALID_ADDR;
+	return invalid_addr;
+}
+
+static inline bool drv_ipa_is_invalid_addr(struct drv_ipa_addr addr)
+{
+	struct drv_ipa_addr invalid_addr = IPA_INVALID_ADDR;
+
+	if (addr.buffer_index == invalid_addr.buffer_index && addr.offset == invalid_addr.offset) {
+		return true;
+	}
+	return false;
+}
+
+#define IOC_IPA_MAGIC	   'I'
+#define IOC_IPA_START	   _IO(IOC_IPA_MAGIC, 0)
+#define IOC_IPA_GET_STATUS _IO(IOC_IPA_MAGIC, 1)
+
+#endif /* _UAPI_LINUX_IPA_H */
-- 
2.17.1



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [PATCH 3/4] soc: visconti: Add Toshiba Visconti DNN image processing accelerator
  2022-04-28 13:11 ` Yuji Ishikawa
  (?)
@ 2022-04-28 13:11   ` Yuji Ishikawa
  -1 siblings, 0 replies; 36+ messages in thread
From: Yuji Ishikawa @ 2022-04-28 13:11 UTC (permalink / raw)
  To: Rob Herring, Nobuhiro Iwamatsu, Sumit Semwal, Christian König
  Cc: linux-arm-kernel, linux-kernel, linux-media, dri-devel,
	linaro-mm-sig, yuji2.ishikawa

Add support to DNN image processing accelerator on Toshiba Visconti ARM SoCs.
The accelerator is applicable to DNN inference tasks.

Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
---
 drivers/soc/visconti/Kconfig           |   6 +
 drivers/soc/visconti/Makefile          |   2 +
 drivers/soc/visconti/dnn/Makefile      |   6 +
 drivers/soc/visconti/dnn/dnn.c         | 533 +++++++++++++++++++++++++
 drivers/soc/visconti/dnn/hwd_dnn.c     | 183 +++++++++
 drivers/soc/visconti/dnn/hwd_dnn.h     |  68 ++++
 drivers/soc/visconti/dnn/hwd_dnn_reg.h | 228 +++++++++++
 drivers/soc/visconti/uapi/dnn.h        |  77 ++++
 8 files changed, 1103 insertions(+)
 create mode 100644 drivers/soc/visconti/dnn/Makefile
 create mode 100644 drivers/soc/visconti/dnn/dnn.c
 create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.c
 create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.h
 create mode 100644 drivers/soc/visconti/dnn/hwd_dnn_reg.h
 create mode 100644 drivers/soc/visconti/uapi/dnn.h

diff --git a/drivers/soc/visconti/Kconfig b/drivers/soc/visconti/Kconfig
index 8b1378917..a25287d0c 100644
--- a/drivers/soc/visconti/Kconfig
+++ b/drivers/soc/visconti/Kconfig
@@ -1 +1,7 @@
+if ARCH_VISCONTI
+
+config VISCONTI_DNN
+    bool "Visconti DNN driver"
+
+endif
 
diff --git a/drivers/soc/visconti/Makefile b/drivers/soc/visconti/Makefile
index 8d710da08..b9bd0f7e2 100644
--- a/drivers/soc/visconti/Makefile
+++ b/drivers/soc/visconti/Makefile
@@ -4,3 +4,5 @@
 #
 
 obj-y += ipa_common.o
+
+obj-$(CONFIG_VISCONTI_DNN) += dnn/
diff --git a/drivers/soc/visconti/dnn/Makefile b/drivers/soc/visconti/dnn/Makefile
new file mode 100644
index 000000000..52d57b60d
--- /dev/null
+++ b/drivers/soc/visconti/dnn/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the Visconti DNN driver
+#
+
+obj-y += dnn.o hwd_dnn.o
diff --git a/drivers/soc/visconti/dnn/dnn.c b/drivers/soc/visconti/dnn/dnn.c
new file mode 100644
index 000000000..aeff92037
--- /dev/null
+++ b/drivers/soc/visconti/dnn/dnn.c
@@ -0,0 +1,533 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+/* Toshiba Visconti DNN Accelerator Support
+ *
+ * (C) Copyright 2022 TOSHIBA CORPORATION
+ * (C) Copyright 2022 Toshiba Electronic Devices & Storage Corporation
+ */
+
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/poll.h>
+#include <linux/wait.h>
+
+#include "../ipa_common.h"
+#include "../uapi/dnn.h"
+#include "hwd_dnn.h"
+
+struct dnn_priv {
+	struct device *dev;
+	struct miscdevice miscdev;
+	struct mutex lock;
+	void __iomem *regs;
+	int irq;
+	wait_queue_head_t waitq;
+	enum drv_ipa_state status;
+	unsigned int poll_event;
+	int id;
+	char name[16];
+	bool dma_coherent;
+	struct hwd_dnn_status hwd_status;
+
+	u32 *list_vaddr[DRV_DNN_BASE_ADDR_NUM];
+	dma_addr_t list_paddr[DRV_DNN_BASE_ADDR_NUM];
+	unsigned int err_flags[HWD_DNN_EER_FLAG_NUM];
+
+	struct dma_buf_attachment *dba[DRV_DNN_BUFFER_INDEX_MAX];
+	struct sg_table *sgt[DRV_DNN_BUFFER_INDEX_MAX];
+	enum dma_data_direction dma_dir[DRV_DNN_BUFFER_INDEX_MAX];
+	unsigned int dma_count;
+
+	dma_addr_t buffer_iova[DRV_DNN_BUFFER_INDEX_MAX];
+
+	struct drv_ipa_addr temp_list[HWD_DNN_LIST_NUM_MAX];
+};
+
+static uint32_t dnn_ipa_addr_to_iova(struct dnn_priv *priv, struct drv_ipa_addr addr)
+{
+	u32 iova = 0;
+
+	if (addr.buffer_index < priv->dma_count &&
+	    addr.offset < priv->dba[addr.buffer_index]->dmabuf->size)
+		iova = priv->buffer_iova[addr.buffer_index] + addr.offset;
+	return iova;
+}
+
+static int dnn_attach_dma_buf(struct dnn_priv *priv, unsigned int buffer_index,
+			      struct drv_ipa_buffer_info buffer_info[DRV_DNN_BUFFER_INDEX_MAX])
+{
+	int ret = 0;
+	dma_addr_t addr;
+
+	if (buffer_index >= DRV_DNN_BUFFER_INDEX_MAX) {
+		dev_err(priv->dev, "Buffer index invalid: index=%d\n", buffer_index);
+		return -EINVAL;
+	}
+
+	switch (buffer_info[buffer_index].direction) {
+	case DRV_IPA_DIR_NONE:
+		priv->dma_dir[priv->dma_count] = DMA_NONE;
+		break;
+	case DRV_IPA_DIR_TO_DEVICE:
+		priv->dma_dir[priv->dma_count] = DMA_TO_DEVICE;
+		break;
+	case DRV_IPA_DIR_FROM_DEVICE:
+		priv->dma_dir[priv->dma_count] = DMA_FROM_DEVICE;
+		break;
+	case DRV_IPA_DIR_BIDIRECTION:
+		priv->dma_dir[priv->dma_count] = DMA_BIDIRECTIONAL;
+		break;
+	default:
+		dev_err(priv->dev, "DMA direction invalid: index=%d dir=%d\n", buffer_index,
+			buffer_info[buffer_index].direction);
+		return -EINVAL;
+	}
+
+	if (!buffer_info[buffer_index].coherent) {
+		priv->dev->dma_coherent = false;
+		if (priv->dma_coherent)
+			priv->dma_dir[priv->dma_count] = DMA_NONE;
+	}
+
+	ret = ipa_attach_dmabuf(priv->dev, buffer_info[buffer_index].fd,
+				&priv->dba[priv->dma_count], &priv->sgt[priv->dma_count], &addr,
+				priv->dma_dir[priv->dma_count]);
+	if (ret == 0) {
+		priv->dma_count++;
+		priv->buffer_iova[buffer_index] = addr;
+	}
+
+	priv->dev->dma_coherent = priv->dma_coherent;
+
+	return ret;
+}
+
+static void dnn_detach_dma_buf(struct dnn_priv *priv)
+{
+	struct dma_buf *dmabuf;
+	int i;
+
+	for (i = 0; i < priv->dma_count; i++) {
+		dmabuf = priv->dba[i]->dmabuf;
+		dma_buf_unmap_attachment(priv->dba[i], priv->sgt[i], priv->dma_dir[i]);
+		dma_buf_detach(dmabuf, priv->dba[i]);
+		dma_buf_put(dmabuf);
+	}
+}
+
+static irqreturn_t dnn_irq(int irq, void *dev_id)
+{
+	struct dnn_priv *priv = dev_id;
+	unsigned int event;
+
+	event = hwd_dnn_irq_handler(priv->id);
+
+	if (event & HWD_DNN_EVENT_EXEC_DONE) {
+		disable_irq_nosync(priv->irq);
+		return IRQ_WAKE_THREAD;
+	}
+
+	return IRQ_NONE;
+}
+
+static irqreturn_t dnn_irq_thread(int irq, void *dev_id)
+{
+	struct dnn_priv *priv = dev_id;
+	unsigned long delay = 1;
+
+	mutex_lock(&priv->lock);
+	dnn_detach_dma_buf(priv);
+
+	hwd_dnn_get_status(priv->id, &priv->hwd_status);
+
+	priv->status = DRV_IPA_STATE_IDLE;
+
+	/* status should be updated before poll_event so that
+	 * when poll() returns, user context must observe state as idle
+	 */
+	smp_wmb();
+
+	if (priv->hwd_status.eer)
+		priv->poll_event = IPA_POLL_EVENT_ERROR;
+	else
+		priv->poll_event = IPA_POLL_EVENT_DONE;
+
+	/* General barrier to avoid re-ordering of priv->poll_event=N and
+	 * waitqueue_active()
+	 */
+	smp_mb();
+
+	/* Threads going to sleep in poll() can miss wakeup, when wakeup is done
+	 * between event check in ipa_poll() and sleeping. Wakeup repeatedly.
+	 */
+	while (waitqueue_active(&priv->waitq)) {
+		wake_up_interruptible(&priv->waitq);
+
+		WARN_ON(delay > IPA_WAKEUP_RETRY_DELAY);
+		usleep_range(delay, delay + 1);
+		delay += delay;
+	}
+
+	mutex_unlock(&priv->lock);
+
+	return IRQ_HANDLED;
+}
+
+static void dnn_start(struct dnn_priv *priv, struct hwd_dnn_descriptor *desc)
+{
+	hwd_dnn_start(priv->id, desc);
+}
+
+static int dnn_parse_entry_addr(struct dnn_priv *priv, int idx, struct drv_dnn_descriptor *desc,
+				struct hwd_dnn_descriptor *hwd_desc)
+{
+	dma_addr_t addr;
+	struct drv_ipa_addr ipa_addr;
+	int j, ret = 0;
+
+	switch (desc->base_addr[idx].purpose) {
+	case DRV_DNN_BASE_ADDR_PURPOSE_OUTPUT:
+	case DRV_DNN_BASE_ADDR_PURPOSE_INPUT:
+		if (copy_from_user(priv->temp_list,
+				   (void __user *)desc->base_addr[idx].addr.list_addr,
+				   sizeof(struct drv_ipa_addr) * (desc->list_num + 1))) {
+			dev_err(priv->dev, "IPA address to iova conversion error: %d\n", __LINE__);
+			ret = -EFAULT;
+			break;
+		}
+
+		hwd_desc->base_addr[idx] = priv->list_paddr[idx];
+		for (j = 0; j < desc->list_num + 1; j++) {
+			ipa_addr = priv->temp_list[j];
+			addr = dnn_ipa_addr_to_iova(priv, ipa_addr);
+			if (addr == 0) {
+				dev_err(priv->dev,
+					"@LIST@ IPA address to iova conversion error: %d\n",
+					__LINE__);
+				ret = -EINVAL;
+				break;
+			}
+			dev_dbg(priv->dev, "@LIST@ %d: fd=%d %llx %x\n", idx,
+				desc->buffer_info[ipa_addr.buffer_index].fd,
+				(u64)hwd_desc->base_addr[idx], (u32)addr);
+			priv->list_vaddr[idx][j] = addr;
+		}
+		break;
+	case DRV_DNN_BASE_ADDR_PURPOSE_AWB:
+		ipa_addr = desc->base_addr[idx].addr.ipa_addr;
+		addr = dnn_ipa_addr_to_iova(priv, ipa_addr);
+		if (addr == 0) {
+			dev_err(priv->dev, "@AWB@ IPA address to iova conversion error: %d\n",
+				__LINE__);
+			ret = -EINVAL;
+			break;
+		}
+		hwd_desc->base_addr[idx] = addr;
+		dev_dbg(priv->dev, "@AWB@ %d: fd=%d %llx\n", idx,
+			desc->buffer_info[ipa_addr.buffer_index].fd, (u64)hwd_desc->base_addr[idx]);
+		break;
+	case DRV_DNN_BASE_ADDR_PURPOSE_TEMPORARY:
+		ipa_addr = desc->base_addr[idx].addr.ipa_addr;
+		addr = dnn_ipa_addr_to_iova(priv, ipa_addr);
+		if (addr == 0) {
+			dev_err(priv->dev, "@TEMP@ IPA address to iova conversion error: %d\n",
+				__LINE__);
+			ret = -EINVAL;
+			break;
+		}
+		hwd_desc->base_addr[idx] = addr;
+		dev_dbg(priv->dev, "@TEMP@ %d: fd=%d %llx\n", idx,
+			desc->buffer_info[ipa_addr.buffer_index].fd, (u64)hwd_desc->base_addr[idx]);
+		break;
+	default:
+		hwd_desc->base_addr[idx] = 0;
+		break;
+	}
+	return ret;
+}
+
+static int dnn_ioctl_start(struct dnn_priv *priv, unsigned long arg)
+{
+	struct drv_dnn_descriptor desc;
+	struct hwd_dnn_descriptor hwd_desc;
+	int i, ret = 0;
+
+	ret = mutex_lock_interruptible(&priv->lock);
+	if (ret)
+		return ret;
+
+	if (priv->status == DRV_IPA_STATE_BUSY) {
+		dev_dbg(priv->dev, "busy: %d\n", priv->status);
+		mutex_unlock(&priv->lock);
+		return -EBUSY;
+	}
+
+	if (copy_from_user(&desc, (void __user *)arg, sizeof(struct drv_dnn_descriptor))) {
+		dev_err(priv->dev, "Descriptor memory access error\n");
+		ret = -EFAULT;
+		goto err1;
+	}
+
+	if (DRV_DNN_BIT_CONFIG_DESC_FINAL != (desc.config_done & DRV_DNN_BIT_CONFIG_DESC_FINAL)) {
+		dev_err(priv->dev, "Descriptor configuration not complete\n");
+		ret = -EINVAL;
+		goto err1;
+	}
+
+	priv->dma_count = 0;
+
+	/* setup buffer */
+	for (i = 0; i < desc.buffer_info_num; i++) {
+		ret = dnn_attach_dma_buf(priv, i, desc.buffer_info);
+		if (ret) {
+			dev_err(priv->dev, "dma buf attach error: index=%d\n", i);
+			goto err2;
+		}
+		dev_dbg(priv->dev, "@buffer[%d]@: fd=%d %s iova=%llx\n", i, desc.buffer_info[i].fd,
+			desc.buffer_info[i].coherent ? "coherent" : "non-coherent",
+			(uint64_t)priv->buffer_iova[i]);
+	}
+
+	/* get iova address of configuration area */
+	hwd_desc.configuration = dnn_ipa_addr_to_iova(priv, desc.configuration);
+	if (hwd_desc.configuration == 0) {
+		dev_err(priv->dev, "Invalid IPA Address: configuration %s: %d\n", __func__,
+			__LINE__);
+		ret = -EINVAL;
+		goto err2;
+	}
+
+	dev_dbg(priv->dev, "@config@: fd=%d %llx\n",
+		desc.buffer_info[desc.configuration.buffer_index].fd,
+		(uint64_t)hwd_desc.configuration);
+
+	for (i = 0; i < DRV_DNN_BASE_ADDR_NUM; i++) {
+		ret = dnn_parse_entry_addr(priv, i, &desc, &hwd_desc);
+		if (ret)
+			goto err2;
+	}
+
+	hwd_desc.configuration_size = desc.configuration_size;
+	hwd_desc.list_num = desc.list_num;
+	hwd_desc.eer_flags_addr = priv->err_flags;
+	hwd_desc.base_addr_flag = desc.base_addr_flag;
+	hwd_desc.config_done = desc.config_done;
+
+	hwd_desc.configuration += desc.configuration_offset;
+
+	dnn_start(priv, &hwd_desc);
+
+	priv->poll_event = IPA_POLL_EVENT_NONE;
+	priv->status = DRV_IPA_STATE_BUSY;
+	enable_irq(priv->irq);
+
+	mutex_unlock(&priv->lock);
+
+	return ret;
+
+err2:
+	dnn_detach_dma_buf(priv);
+err1:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int dnn_ioctl_get_status(struct dnn_priv *priv, unsigned long arg)
+{
+	struct drv_dnn_status status;
+	struct hwd_dnn_status hwd_status;
+	int ret = 0, i;
+
+	ret = mutex_lock_interruptible(&priv->lock);
+	if (ret)
+		return ret;
+
+	if (priv->status == DRV_IPA_STATE_BUSY)
+		hwd_dnn_get_status(priv->id, &hwd_status);
+	else
+		hwd_status = priv->hwd_status;
+
+	status.state = priv->status;
+	mutex_unlock(&priv->lock);
+
+	status.eer_cmd = hwd_status.eer_cmd;
+	status.eer = hwd_status.eer;
+	for (i = 0; i < HWD_DNN_EER_FLAG_NUM; i++)
+		status.eer_flags[i] = priv->err_flags[i];
+
+	if (copy_to_user((void __user *)arg, &status, sizeof(struct drv_dnn_status))) {
+		dev_err(priv->dev, "status memory access error\n");
+		ret = -EFAULT;
+	}
+
+	return ret;
+}
+
+static long dnn_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
+{
+	struct dnn_priv *priv = container_of(fp->private_data, struct dnn_priv, miscdev);
+	int ret = 0;
+
+	switch (cmd) {
+	case IOC_IPA_START:
+		ret = dnn_ioctl_start(priv, arg);
+		break;
+	case IOC_IPA_GET_STATUS:
+		ret = dnn_ioctl_get_status(priv, arg);
+		break;
+	default:
+		ret = -ENOIOCTLCMD;
+		break;
+	}
+
+	return ret;
+}
+
+static __poll_t dnn_poll(struct file *fp, poll_table *wait)
+{
+	struct dnn_priv *priv = container_of(fp->private_data, struct dnn_priv, miscdev);
+	__poll_t mask = 0;
+	unsigned int poll_event;
+
+	poll_wait(fp, &priv->waitq, wait);
+
+	/* Barrier to avoid re-ordering of poll_wait() and event load
+	 * Read barrier here and release barrier in poll_wait() together will
+	 * prevent re-ordering
+	 */
+	smp_rmb();
+	poll_event = priv->poll_event;
+	if (poll_event != IPA_POLL_EVENT_NONE) {
+		mask = EPOLLIN | EPOLLRDNORM;
+		if (poll_event == IPA_POLL_EVENT_ERROR)
+			mask |= EPOLLERR;
+	}
+	return mask;
+}
+
+static const struct file_operations dnn_fops = {
+	.owner = THIS_MODULE,
+	.unlocked_ioctl = dnn_ioctl,
+	.poll = dnn_poll,
+};
+
+static int dnn_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct dnn_priv *priv;
+	int i, ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	mutex_init(&priv->lock);
+
+	/* update DMA mask */
+	priv->dma_coherent = dev->dma_coherent;
+	ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(36));
+	if (ret)
+		return ret;
+
+	priv->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->regs))
+		return PTR_ERR(priv->regs);
+
+	priv->irq = platform_get_irq(pdev, 0);
+	if (priv->irq < 0)
+		return priv->irq;
+
+	ret = devm_request_threaded_irq(dev, priv->irq, dnn_irq, dnn_irq_thread, 0, "dnn", priv);
+	if (ret) {
+		dev_err(dev, "irq request failed\n");
+		return ret;
+	}
+	disable_irq(priv->irq);
+
+	ret = of_property_read_u32(dev->of_node, "index", &priv->id);
+	if (ret) {
+		dev_err(dev, "failed to acquire irq resource\n");
+		return ret;
+	}
+
+	/*
+	 * allocate uncached-memory to hold address-list for DNN operation
+	 * to hold ptr to 32bit addr memory block
+	 *      for each base address (upto HWD_DNN_BASE_ADDR_NUM)
+	 *      for each iteration (up to HWD_DNN_LIST_NUM_MAX)
+	 * uint32_t list_addr [HWD_DNN_BASE_ADDR_NUM] [HWD_DNN_LIST_NUM_MAX];
+	 */
+	priv->list_vaddr[0] =
+		dma_alloc_wc(dev, sizeof(u32) * HWD_DNN_LIST_NUM_MAX * HWD_DNN_BASE_ADDR_NUM,
+			     &priv->list_paddr[0], GFP_KERNEL);
+	if (!priv->list_vaddr[0]) {
+		dev_err(dev, "dma_alloc_wc failed\n");
+		return -ENOMEM;
+	}
+	for (i = 1; i < HWD_DNN_BASE_ADDR_NUM; i++) {
+		priv->list_vaddr[i] = priv->list_vaddr[0] + HWD_DNN_LIST_NUM_MAX * i;
+		priv->list_paddr[i] = priv->list_paddr[0] + sizeof(u32) * HWD_DNN_LIST_NUM_MAX * i;
+	}
+
+	hwd_dnn_initialize(priv->id, priv->regs);
+
+	snprintf(priv->name, sizeof(priv->name), "dnn%d", priv->id);
+	priv->miscdev.minor = MISC_DYNAMIC_MINOR;
+	priv->miscdev.name = priv->name;
+	priv->miscdev.fops = &dnn_fops;
+	ret = misc_register(&priv->miscdev);
+	if (ret) {
+		dev_err(dev, "misc registration failed\n");
+		hwd_dnn_uninitialize(priv->id);
+		dma_free_wc(dev, sizeof(u32) * HWD_DNN_LIST_NUM_MAX * HWD_DNN_BASE_ADDR_NUM,
+			    priv->list_vaddr[0], priv->list_paddr[0]);
+		return ret;
+	}
+
+	priv->dev = dev;
+	platform_set_drvdata(pdev, priv);
+
+	init_waitqueue_head(&priv->waitq);
+
+	priv->status = DRV_IPA_STATE_IDLE;
+	return 0;
+}
+
+static int dnn_remove(struct platform_device *pdev)
+{
+	struct dnn_priv *priv = platform_get_drvdata(pdev);
+
+	misc_deregister(&priv->miscdev);
+	hwd_dnn_uninitialize(priv->id);
+	dma_free_wc(&pdev->dev, sizeof(u32) * HWD_DNN_LIST_NUM_MAX * HWD_DNN_BASE_ADDR_NUM,
+		    priv->list_vaddr[0], priv->list_paddr[0]);
+	return 0;
+}
+
+static const struct of_device_id dnn_of_match[] = {
+	{
+		.compatible = "toshiba,visconti-dnn",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(platform, dnn_of_match);
+
+static struct platform_driver dnn_driver = {
+	.probe = dnn_probe,
+	.remove = dnn_remove,
+	.driver = {
+		.name = "visconti_dnn",
+		.of_match_table = of_match_ptr(dnn_of_match),
+	},
+};
+module_platform_driver(dnn_driver);
+
+MODULE_AUTHOR("Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>");
+MODULE_DESCRIPTION("Toshiba Visconti DNN driver");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/soc/visconti/dnn/hwd_dnn.c b/drivers/soc/visconti/dnn/hwd_dnn.c
new file mode 100644
index 000000000..832040329
--- /dev/null
+++ b/drivers/soc/visconti/dnn/hwd_dnn.c
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+/* Toshiba Visconti DNN Accelerator Support
+ *
+ * (C) Copyright 2022 TOSHIBA CORPORATION
+ * (C) Copyright 2022 Toshiba Electronic Devices & Storage Corporation
+ */
+
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+
+#include "hwd_dnn.h"
+#include "hwd_dnn_reg.h"
+
+#define HWD_DNN_INT_END		BIT(0)
+#define HWD_DNN_INT_EER		BIT(24)
+#define HWD_DNN_INT_UNUSED	(0x003f0100U)
+#define HWD_DNN_INT_MASK_CONFIG (HWD_DNN_INT_UNUSED | HWD_DNN_INT_EER)
+#define HWD_DNN_INT_CLEAR_ALL	(HWD_DNN_INT_END | HWD_DNN_INT_EER)
+#define HWD_DNN_EXE_CONFIG_MODE (0x3U)
+
+#define HWD_DNN_CGATE_ORD_CONFIG BIT(17)
+
+/**
+ * struct hwd_dnn_resources - HWD driver internal resource structure
+ *
+ * @reg: control register
+ * @status: driver status
+ * @eer_flags_addr: Address of execution error flags
+ */
+struct hwd_dnn_resources {
+	struct hwd_dnn_reg *reg;
+	struct hwd_dnn_status status;
+	u32 *eer_flags_addr;
+};
+
+/* HWD driver internal resource */
+static struct hwd_dnn_resources hwd_dnn_resources[HWD_DNN_DEVICE_MAX] = {};
+
+/**
+ * hwd_dnn_initialize() - Initialize DNN device
+ *
+ * @module_id: @ref hwd_dnn_device "id" of the h/w module
+ * @vaddr: register base virtual address
+ * Return: 0 operation completed successfully
+ */
+void hwd_dnn_initialize(u32 module_id, void *vaddr)
+{
+	struct hwd_dnn_resources *res = &hwd_dnn_resources[module_id];
+
+	/* Initialize the device */
+	res->reg = (struct hwd_dnn_reg *)vaddr;
+}
+
+/**
+ * hwd_dnn_uninitialize() - Uninitialize DNN device
+ *
+ * @module_id: @ref hwd_dnn_device "id" of the h/w module
+ */
+void hwd_dnn_uninitialize(u32 module_id)
+{
+	struct hwd_dnn_resources *res = &hwd_dnn_resources[module_id];
+
+	res->reg = NULL;
+}
+
+/**
+ * hwd_dnn_start() - Start DNN device
+ *
+ * @module_id: @ref hwd_dnn_device "id" of the h/w module
+ * @desc: Pointer to descriptor structure
+ */
+void hwd_dnn_start(u32 module_id, const struct hwd_dnn_descriptor *desc)
+{
+	struct hwd_dnn_resources *res = &hwd_dnn_resources[module_id];
+	struct hwd_dnn_reg *reg;
+	u32 base_addr_flag;
+	int i;
+
+	reg = res->reg;
+
+	/* Configure the registers with user provided values */
+	writel(desc->configuration & GENMASK(31, 0), &reg->cfg_addr);
+	writel(desc->configuration_size, &reg->cfg_size);
+	writel(desc->list_num, &reg->cfg_rpt);
+
+	base_addr_flag = desc->base_addr_flag;
+	for (i = 0; i < HWD_DNN_BASE_ADDR_NUM; i++) {
+		if (base_addr_flag & BIT(i)) {
+			/* 1: address list is specified */
+			writel(0U, &reg->base_addr[i]);
+			writel(desc->base_addr[i] & GENMASK(31, 0), &reg->base_list[i]);
+		} else {
+			/* 0: region address is specified */
+			writel(desc->base_addr[i] & GENMASK(31, 0), &reg->base_addr[i]);
+			writel(0U, &reg->base_list[i]);
+		}
+	}
+
+	writel(base_addr_flag, &reg->base_list_cfg);
+
+	/* clear and unmask interrupts */
+	writel(HWD_DNN_INT_CLEAR_ALL, &reg->intstat);
+	writel(HWD_DNN_INT_MASK_CONFIG, &reg->intmask);
+
+	res->status.eer_cmd = 0;
+	res->status.eer = 0;
+	res->eer_flags_addr = desc->eer_flags_addr;
+
+	/*Invalidate load command in Clock Gating Control Register */
+	writel(HWD_DNN_CGATE_ORD_CONFIG, &reg->cgate_ord);
+
+	/* Sync memory barrier */
+	dsb(st);
+
+	/* Start the device */
+	writel(HWD_DNN_EXE_CONFIG_MODE, &reg->exe);
+}
+
+/**
+ * hwd_dnn_irq_handler() - HWD DNN interrupt handler
+ *
+ * @module_id: id of the h/w module
+ * Return: HWD_DNN_EVENT_EXEC_DONE Bit field saying Configuration processing is completed
+ */
+u32 hwd_dnn_irq_handler(u32 module_id)
+{
+	struct hwd_dnn_resources *res = &hwd_dnn_resources[module_id];
+	struct hwd_dnn_reg *reg;
+	u32 event = 0;
+	u32 int_stat;
+	u32 cause;
+	int i;
+
+	reg = res->reg;
+
+	/* Read the interrupt causes */
+	cause = readl(&reg->mask_intstat);
+
+	/* Read the interrupt status register */
+	int_stat = readl(&reg->intstat);
+
+	/*
+	 * Read the error command.
+	 * Clearing DNN_INTSTAT.EER interrupt cause initializes the error command register.
+	 * Read error command before clearing the interrupt cause.
+	 */
+	res->status.eer_cmd = readl(&reg->int_eer_cmd);
+
+	/* Clear the interrupt causes */
+	writel(cause, &reg->intstat);
+
+	if (cause & HWD_DNN_INT_END) {
+		/* Get EER flags, if requestd */
+		if (res->eer_flags_addr)
+			for (i = 0; i < HWD_DNN_EER_FLAG_NUM; i++)
+				res->eer_flags_addr[i] = readl(&reg->eer_flag[i]);
+
+		event = HWD_DNN_EVENT_EXEC_DONE;
+	}
+
+	if (int_stat & HWD_DNN_INT_EER) {
+		/* Operation error occurred */
+		res->status.eer = 1;
+	}
+
+	return event;
+}
+
+/**
+ * hwd_dnn_get_status() - HWD DNN Get Status
+ *
+ * @module_id: @ref hwd_dnn_device "id" of the h/w module
+ * @status: Pointer to status structure
+ */
+void hwd_dnn_get_status(u32 module_id, struct hwd_dnn_status *status)
+{
+	const struct hwd_dnn_resources *res = &hwd_dnn_resources[module_id];
+
+	/* Update device status */
+	status->eer_cmd = res->status.eer_cmd;
+	status->eer = res->status.eer;
+}
diff --git a/drivers/soc/visconti/dnn/hwd_dnn.h b/drivers/soc/visconti/dnn/hwd_dnn.h
new file mode 100644
index 000000000..84425990c
--- /dev/null
+++ b/drivers/soc/visconti/dnn/hwd_dnn.h
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */
+/* Toshiba Visconti DNN Accelerator Support
+ *
+ * (C) Copyright 2022 TOSHIBA CORPORATION
+ * (C) Copyright 2022 Toshiba Electronic Devices & Storage Corporation
+ */
+
+#ifndef HWD_DNN_H
+#define HWD_DNN_H
+
+/**
+ * enum hwd_dnn_device_id - device ids for available DNN Accelerators
+ */
+enum hwd_dnn_device_id { HWD_DNN_DEVICE_0 = 0, HWD_DNN_DEVICE_1 = 1, HWD_DNN_DEVICE_MAX = 2 };
+
+/* DNN events returned by irq handler */
+#define HWD_DNN_EVENT_EXEC_DONE (1U)
+
+/* number of base address available for DNN */
+#define HWD_DNN_BASE_ADDR_NUM (8U)
+
+/* number of error flag registers */
+#define HWD_DNN_EER_FLAG_NUM (32U)
+
+/* DNN hardware can execute 1024 iterations for different dataset at a time */
+#define HWD_DNN_LIST_NUM_MAX (1024U)
+
+/**
+ * struct hwd_dnn_status - DNN HWD Driver Status
+ *
+ * @eer_cmd:  Error Command
+ * @eer:      Execution Error
+ * @reserved: Padding
+ */
+struct hwd_dnn_status {
+	u32 eer_cmd;
+	u32 eer : 1;
+	u32 reserved : 31;
+};
+
+/**
+ * struct hwd_dnn_descriptor - HWD DNN Descriptor
+ *
+ * @configuration: Configuration data
+ * @configuration_size: Configuration data size
+ * @list_num: Number of input/output list
+ * @base_addr: Base Address
+ * @eer_flags_addr: Address of storing execution error flags
+ * @base_addr_flag: Bit-fields of Base Address list config. If 1, address list. If 0, fixed address
+ * @config_done: Flags of called configuration
+ */
+struct hwd_dnn_descriptor {
+	u32 configuration;
+	u32 configuration_size;
+	u32 list_num;
+	u32 base_addr[HWD_DNN_BASE_ADDR_NUM];
+	u32 *eer_flags_addr;
+	u32 base_addr_flag;
+	u16 config_done;
+};
+
+void hwd_dnn_initialize(u32 module_id, void *vaddr);
+void hwd_dnn_uninitialize(u32 module_id);
+void hwd_dnn_start(u32 module_id, const struct hwd_dnn_descriptor *desc);
+u32 hwd_dnn_irq_handler(u32 module_id);
+void hwd_dnn_get_status(u32 module_id, struct hwd_dnn_status *status);
+
+#endif /* HWD_DNN_H */
diff --git a/drivers/soc/visconti/dnn/hwd_dnn_reg.h b/drivers/soc/visconti/dnn/hwd_dnn_reg.h
new file mode 100644
index 000000000..c1271e092
--- /dev/null
+++ b/drivers/soc/visconti/dnn/hwd_dnn_reg.h
@@ -0,0 +1,228 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */
+/* Toshiba Visconti DNN Accelerator Support
+ *
+ * (C) Copyright 2022 TOSHIBA CORPORATION
+ * (C) Copyright 2022 Toshiba Electronic Devices & Storage Corporation
+ */
+
+#ifndef HWD_DNN_REG_H
+#define HWD_DNN_REG_H
+
+/**
+ * struct hwd_dnn_reg - DNN register address struct
+ */
+struct hwd_dnn_reg {
+	u32 version;
+	u32 exe;
+	u32 reserved_a_1;
+	u32 intstat;
+	u32 intmask;
+	u32 mask_intstat;
+	u32 reserved_a_2;
+	u32 int_eer_cmd;
+	u32 reserved_b_1[8];
+	u32 cfg_cid;
+	u32 cfg_cnm;
+	u32 reserved_b_2[10];
+	u32 reserved_a_3;
+	u32 cgate_ord;
+	u32 reserved_b_3[2];
+	u32 eer_flag[32];
+	u32 cfg_addr;
+	u32 cfg_size;
+	u32 cfg_rpt;
+	u32 reserved_b_4[1];
+	u32 base_list_cfg;
+	u32 reserved_b_5[11];
+	u32 base_addr[8];
+	u32 reserved_b_6[24];
+	u32 base_list[8];
+	u32 reserved_b_7[8];
+	u32 cmd_load;
+	u32 ld_format;
+	u32 reserved_b_8[14];
+	u32 ld_g_size0;
+	u32 ld_g_size1;
+	u32 reserved_b_9[2];
+	u32 reserved_a_4;
+	u32 reserved_b_10[1];
+	u32 ld_g_base_id;
+	u32 ld_g_offset;
+	u32 ld_g_lptch;
+	u32 ld_g_cptch;
+	u32 ld_g_vptch;
+	u32 reserved_b_11[5];
+	u32 ld_l_size0;
+	u32 ld_l_size1;
+	u32 reserved_b_12[2];
+	u32 ld_l_addr;
+	u32 reserved_b_13[3];
+	u32 ld_l_lptch;
+	u32 ld_l_cptch;
+	u32 ld_l_vptch;
+	u32 reserved_b_14[17];
+	u32 reserved_a_5;
+	u32 reserved_b_15[3];
+	u32 cmd_store;
+	u32 st_format;
+	u32 reserved_b_16[14];
+	u32 st_g_size0;
+	u32 st_g_size1;
+	u32 reserved_b_17[2];
+	u32 reserved_a_6;
+	u32 reserved_b_18[1];
+	u32 st_g_base_id;
+	u32 st_g_offset;
+	u32 st_g_lptch;
+	u32 st_g_cptch;
+	u32 st_g_vptch;
+	u32 reserved_b_19[5];
+	u32 st_l_size0;
+	u32 st_l_size1;
+	u32 reserved_b_20[2];
+	u32 st_l_addr;
+	u32 reserved_b_21[3];
+	u32 st_l_lptch;
+	u32 st_l_cptch;
+	u32 st_l_vptch;
+	u32 reserved_b_22[17];
+	u32 reserved_a_7;
+	u32 reserved_b_23[3];
+	u32 cmd_copy;
+	u32 reserved_b_24[15];
+	u32 cp_src_size0;
+	u32 cp_src_size1;
+	u32 reserved_b_25[2];
+	u32 cp_src_addr;
+	u32 reserved_b_26[3];
+	u32 cp_src_lptch;
+	u32 cp_src_cptch;
+	u32 reserved_a_8;
+	u32 reserved_b_27[5];
+	u32 cp_dst_size0;
+	u32 cp_dst_size1;
+	u32 reserved_b_28[2];
+	u32 cp_dst_addr;
+	u32 reserved_b_29[3];
+	u32 cp_dst_lptch;
+	u32 cp_dst_cptch;
+	u32 reserved_a_9;
+	u32 reserved_b_30[17];
+	u32 reserved_a_10;
+	u32 reserved_b_31[3];
+	u32 cmd_fill;
+	u32 reserved_b_32[1];
+	u32 fl_cfg;
+	u32 reserved_b_33[13];
+	u32 fl_src_size0;
+	u32 fl_src_size1;
+	u32 reserved_b_34[2];
+	u32 fl_src_addr;
+	u32 reserved_b_35[3];
+	u32 fl_src_lptch;
+	u32 fl_src_cptch;
+	u32 reserved_b_36[6];
+	u32 fl_dst_size0;
+	u32 fl_dst_size1;
+	u32 reserved_b_37[2];
+	u32 fl_dst_addr;
+	u32 reserved_b_38[3];
+	u32 fl_dst_lptch;
+	u32 fl_dst_cptch;
+	u32 reserved_b_39[22];
+	u32 cmd_sync;
+	u32 reserved_b_40[1];
+	u32 cmd_srst;
+	u32 reserved_b_41[1];
+	u32 cmd_halt;
+	u32 reserved_b_42[3];
+	u32 cmd_finish;
+	u32 reserved_b_43[119];
+	u32 cmd_exe;
+	u32 exe_mode;
+	u32 reserved_b_44[14];
+	u32 exe_inf_size0;
+	u32 exe_inf_size1;
+	u32 reserved_b_45[2];
+	u32 exe_inf_addr;
+	u32 reserved_b_46[3];
+	u32 exe_inf_lptch;
+	u32 exe_inf_cptch;
+	u32 reserved_b_47[26];
+	u32 exe_conv_bias_addr;
+	u32 reserved_b_48[27];
+	u32 exe_conv_wt_size0;
+	u32 exe_conv_wt_size1;
+	u32 reserved_b_49[2];
+	u32 exe_conv_wt_addr;
+	u32 reserved_b_50[3];
+	u32 exe_conv_wt_lptch;
+	u32 exe_conv_wt_cptch;
+	u32 exe_conv_wt_vptch;
+	u32 reserved_b_51[9];
+	u32 exe_conv_acv_addr;
+	u32 reserved_b_52[3];
+	u32 exe_conv_acv_lptch;
+	u32 exe_conv_acv_cptch;
+	u32 reserved_b_53[18];
+	u32 exe_conv_out;
+	u32 reserved_b_54[11];
+	u32 actv_tbl_range;
+	u32 reserved_a_11;
+	u32 actv_tbl_prm;
+	u32 reserved_b_55[5];
+	u32 exe_pool_size;
+	u32 reserved_b_56[43];
+	u32 exe_pool_out;
+	u32 exe_pool_pe_crop;
+	u32 reserved_b_57[10];
+	u32 exe_norm_g_prm;
+	u32 reserved_b_58[15];
+	u32 exe_sav_max_prm;
+	u32 reserved_b_59[35];
+	u32 exe_norm_out;
+	u32 reserved_b_60[23];
+	u32 exe_outf_addr;
+	u32 reserved_b_61[3];
+	u32 exe_outf_lptch;
+	u32 exe_outf_cptch;
+	u32 reserved_b_62[102];
+	u32 reserved_a_12;
+	u32 reserved_b_63[8];
+	u32 reserved_a_13;
+	u32 reserved_a_14;
+	u32 reserved_a_15;
+	u32 reserved_b_64[4];
+	u32 reserved_a_16;
+	u32 reserved_a_17;
+	u32 reserved_b_65[46];
+	u32 exe_pool_pa3_0;
+	u32 exe_pool_pa3_2;
+	u32 exe_pool_pa3_4;
+	u32 exe_pool_pa3_6;
+	u32 exe_pool_pa3_8;
+	u32 exe_pool_pa3_10;
+	u32 exe_pool_pa3_12;
+	u32 exe_pool_pa3_14;
+	u32 exe_pool_pa3_16;
+	u32 exe_pool_pa3_18;
+	u32 exe_pool_pa3_20;
+	u32 exe_pool_pa3_22;
+	u32 exe_pool_pa3_24;
+	u32 reserved_b_66[3];
+	u32 exe_pool_pa2_0;
+	u32 exe_pool_pa2_2;
+	u32 exe_pool_pa2_4;
+	u32 exe_pool_pa2_6;
+	u32 exe_pool_pa2_8;
+	u32 exe_pool_pa2_10;
+	u32 exe_pool_pa2_12;
+	u32 exe_pool_pa2_14;
+	u32 exe_pool_pa2_16;
+	u32 exe_pool_pa2_18;
+	u32 exe_pool_pa2_20;
+	u32 exe_pool_pa2_22;
+	u32 exe_pool_pa2_24;
+};
+
+#endif /* HWD_DNN_REG_H */
diff --git a/drivers/soc/visconti/uapi/dnn.h b/drivers/soc/visconti/uapi/dnn.h
new file mode 100644
index 000000000..972c39655
--- /dev/null
+++ b/drivers/soc/visconti/uapi/dnn.h
@@ -0,0 +1,77 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/* Toshiba Visconti DNN Accelerator Support
+ *
+ * (C) Copyright 2022 TOSHIBA CORPORATION
+ * (C) Copyright 2022 Toshiba Electronic Devices & Storage Corporation
+ */
+
+#ifndef _UAPI_LINUX_DNN_H
+#define _UAPI_LINUX_DNN_H
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+#include "ipa.h"
+
+#define DRV_DNN_BIT_CONFIG_DESC_FINAL (0x8000U)
+#define DRV_DNN_BUFFER_INDEX_MAX      (15)
+
+#define DRV_DNN_BASE_ADDR_NUM (8U) /* DNN number of base address */
+
+#define DRV_DNN_BASE_ADDR_PURPOSE_INPUT	    (1U)
+#define DRV_DNN_BASE_ADDR_PURPOSE_OUTPUT    (2U)
+#define DRV_DNN_BASE_ADDR_PURPOSE_AWB	    (3U)
+#define DRV_DNN_BASE_ADDR_PURPOSE_TEMPORARY (4U)
+
+/**
+ * struct drv_dnn_status - DNN IPA status for IOC_IPA_GET_STATUS
+ *
+ * @state:     State of driver
+ * @eer_cmd:   Execution error command
+ * @eer:       Execution error
+ * @reserved:  Padding
+ * @eer_flags: Execution error flags
+ */
+struct drv_dnn_status {
+	enum drv_ipa_state state;
+	u32 eer_cmd;
+	u32 eer : 1;
+	u32 reserved : 31;
+	u32 eer_flags[32];
+};
+
+struct drv_dnn_base_addr {
+	u32 purpose;
+	union {
+		struct drv_ipa_addr ipa_addr;
+		uintptr_t list_addr;
+	} addr;
+};
+
+/**
+ * struct drv_dnn_descriptor - DNN IPA Descriptor for IOC_IPA_START
+ *
+ * @configuration:        Address of configuration data
+ * @configuration_offset: Configuration offset
+ * @configuration_size:   Configuration data size
+ * @list_num:             Number of input/output list
+ * @base_addr:            Base addresses
+ * @base_addr_flag:       Bit-fields of base_addr list config
+ * - if 0, fixed address
+ * - if 1, address list
+ * @config_done:          Flags of called configuration
+ * @buffer_info:          Table of buffer information
+ * @buffer_info_num:      Number of buffer_info
+ */
+struct drv_dnn_descriptor {
+	struct drv_ipa_addr configuration;
+	u32 configuration_offset;
+	u32 configuration_size;
+	u32 list_num;
+	struct drv_dnn_base_addr base_addr[DRV_DNN_BASE_ADDR_NUM];
+	u32 base_addr_flag;
+	u16 config_done;
+	struct drv_ipa_buffer_info buffer_info[DRV_DNN_BUFFER_INDEX_MAX];
+	s32 buffer_info_num;
+};
+
+#endif /* _UAPI_LINUX_DNN_H */
-- 
2.17.1



^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [PATCH 3/4] soc: visconti: Add Toshiba Visconti DNN image processing accelerator
@ 2022-04-28 13:11   ` Yuji Ishikawa
  0 siblings, 0 replies; 36+ messages in thread
From: Yuji Ishikawa @ 2022-04-28 13:11 UTC (permalink / raw)
  To: Rob Herring, Nobuhiro Iwamatsu, Sumit Semwal, Christian König
  Cc: linux-kernel, dri-devel, linaro-mm-sig, yuji2.ishikawa,
	linux-arm-kernel, linux-media

Add support to DNN image processing accelerator on Toshiba Visconti ARM SoCs.
The accelerator is applicable to DNN inference tasks.

Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
---
 drivers/soc/visconti/Kconfig           |   6 +
 drivers/soc/visconti/Makefile          |   2 +
 drivers/soc/visconti/dnn/Makefile      |   6 +
 drivers/soc/visconti/dnn/dnn.c         | 533 +++++++++++++++++++++++++
 drivers/soc/visconti/dnn/hwd_dnn.c     | 183 +++++++++
 drivers/soc/visconti/dnn/hwd_dnn.h     |  68 ++++
 drivers/soc/visconti/dnn/hwd_dnn_reg.h | 228 +++++++++++
 drivers/soc/visconti/uapi/dnn.h        |  77 ++++
 8 files changed, 1103 insertions(+)
 create mode 100644 drivers/soc/visconti/dnn/Makefile
 create mode 100644 drivers/soc/visconti/dnn/dnn.c
 create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.c
 create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.h
 create mode 100644 drivers/soc/visconti/dnn/hwd_dnn_reg.h
 create mode 100644 drivers/soc/visconti/uapi/dnn.h

diff --git a/drivers/soc/visconti/Kconfig b/drivers/soc/visconti/Kconfig
index 8b1378917..a25287d0c 100644
--- a/drivers/soc/visconti/Kconfig
+++ b/drivers/soc/visconti/Kconfig
@@ -1 +1,7 @@
+if ARCH_VISCONTI
+
+config VISCONTI_DNN
+    bool "Visconti DNN driver"
+
+endif
 
diff --git a/drivers/soc/visconti/Makefile b/drivers/soc/visconti/Makefile
index 8d710da08..b9bd0f7e2 100644
--- a/drivers/soc/visconti/Makefile
+++ b/drivers/soc/visconti/Makefile
@@ -4,3 +4,5 @@
 #
 
 obj-y += ipa_common.o
+
+obj-$(CONFIG_VISCONTI_DNN) += dnn/
diff --git a/drivers/soc/visconti/dnn/Makefile b/drivers/soc/visconti/dnn/Makefile
new file mode 100644
index 000000000..52d57b60d
--- /dev/null
+++ b/drivers/soc/visconti/dnn/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the Visconti DNN driver
+#
+
+obj-y += dnn.o hwd_dnn.o
diff --git a/drivers/soc/visconti/dnn/dnn.c b/drivers/soc/visconti/dnn/dnn.c
new file mode 100644
index 000000000..aeff92037
--- /dev/null
+++ b/drivers/soc/visconti/dnn/dnn.c
@@ -0,0 +1,533 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+/* Toshiba Visconti DNN Accelerator Support
+ *
+ * (C) Copyright 2022 TOSHIBA CORPORATION
+ * (C) Copyright 2022 Toshiba Electronic Devices & Storage Corporation
+ */
+
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/poll.h>
+#include <linux/wait.h>
+
+#include "../ipa_common.h"
+#include "../uapi/dnn.h"
+#include "hwd_dnn.h"
+
+struct dnn_priv {
+	struct device *dev;
+	struct miscdevice miscdev;
+	struct mutex lock;
+	void __iomem *regs;
+	int irq;
+	wait_queue_head_t waitq;
+	enum drv_ipa_state status;
+	unsigned int poll_event;
+	int id;
+	char name[16];
+	bool dma_coherent;
+	struct hwd_dnn_status hwd_status;
+
+	u32 *list_vaddr[DRV_DNN_BASE_ADDR_NUM];
+	dma_addr_t list_paddr[DRV_DNN_BASE_ADDR_NUM];
+	unsigned int err_flags[HWD_DNN_EER_FLAG_NUM];
+
+	struct dma_buf_attachment *dba[DRV_DNN_BUFFER_INDEX_MAX];
+	struct sg_table *sgt[DRV_DNN_BUFFER_INDEX_MAX];
+	enum dma_data_direction dma_dir[DRV_DNN_BUFFER_INDEX_MAX];
+	unsigned int dma_count;
+
+	dma_addr_t buffer_iova[DRV_DNN_BUFFER_INDEX_MAX];
+
+	struct drv_ipa_addr temp_list[HWD_DNN_LIST_NUM_MAX];
+};
+
+static uint32_t dnn_ipa_addr_to_iova(struct dnn_priv *priv, struct drv_ipa_addr addr)
+{
+	u32 iova = 0;
+
+	if (addr.buffer_index < priv->dma_count &&
+	    addr.offset < priv->dba[addr.buffer_index]->dmabuf->size)
+		iova = priv->buffer_iova[addr.buffer_index] + addr.offset;
+	return iova;
+}
+
+static int dnn_attach_dma_buf(struct dnn_priv *priv, unsigned int buffer_index,
+			      struct drv_ipa_buffer_info buffer_info[DRV_DNN_BUFFER_INDEX_MAX])
+{
+	int ret = 0;
+	dma_addr_t addr;
+
+	if (buffer_index >= DRV_DNN_BUFFER_INDEX_MAX) {
+		dev_err(priv->dev, "Buffer index invalid: index=%d\n", buffer_index);
+		return -EINVAL;
+	}
+
+	switch (buffer_info[buffer_index].direction) {
+	case DRV_IPA_DIR_NONE:
+		priv->dma_dir[priv->dma_count] = DMA_NONE;
+		break;
+	case DRV_IPA_DIR_TO_DEVICE:
+		priv->dma_dir[priv->dma_count] = DMA_TO_DEVICE;
+		break;
+	case DRV_IPA_DIR_FROM_DEVICE:
+		priv->dma_dir[priv->dma_count] = DMA_FROM_DEVICE;
+		break;
+	case DRV_IPA_DIR_BIDIRECTION:
+		priv->dma_dir[priv->dma_count] = DMA_BIDIRECTIONAL;
+		break;
+	default:
+		dev_err(priv->dev, "DMA direction invalid: index=%d dir=%d\n", buffer_index,
+			buffer_info[buffer_index].direction);
+		return -EINVAL;
+	}
+
+	if (!buffer_info[buffer_index].coherent) {
+		priv->dev->dma_coherent = false;
+		if (priv->dma_coherent)
+			priv->dma_dir[priv->dma_count] = DMA_NONE;
+	}
+
+	ret = ipa_attach_dmabuf(priv->dev, buffer_info[buffer_index].fd,
+				&priv->dba[priv->dma_count], &priv->sgt[priv->dma_count], &addr,
+				priv->dma_dir[priv->dma_count]);
+	if (ret == 0) {
+		priv->dma_count++;
+		priv->buffer_iova[buffer_index] = addr;
+	}
+
+	priv->dev->dma_coherent = priv->dma_coherent;
+
+	return ret;
+}
+
+static void dnn_detach_dma_buf(struct dnn_priv *priv)
+{
+	struct dma_buf *dmabuf;
+	int i;
+
+	for (i = 0; i < priv->dma_count; i++) {
+		dmabuf = priv->dba[i]->dmabuf;
+		dma_buf_unmap_attachment(priv->dba[i], priv->sgt[i], priv->dma_dir[i]);
+		dma_buf_detach(dmabuf, priv->dba[i]);
+		dma_buf_put(dmabuf);
+	}
+}
+
+static irqreturn_t dnn_irq(int irq, void *dev_id)
+{
+	struct dnn_priv *priv = dev_id;
+	unsigned int event;
+
+	event = hwd_dnn_irq_handler(priv->id);
+
+	if (event & HWD_DNN_EVENT_EXEC_DONE) {
+		disable_irq_nosync(priv->irq);
+		return IRQ_WAKE_THREAD;
+	}
+
+	return IRQ_NONE;
+}
+
+static irqreturn_t dnn_irq_thread(int irq, void *dev_id)
+{
+	struct dnn_priv *priv = dev_id;
+	unsigned long delay = 1;
+
+	mutex_lock(&priv->lock);
+	dnn_detach_dma_buf(priv);
+
+	hwd_dnn_get_status(priv->id, &priv->hwd_status);
+
+	priv->status = DRV_IPA_STATE_IDLE;
+
+	/* status should be updated before poll_event so that
+	 * when poll() returns, user context must observe state as idle
+	 */
+	smp_wmb();
+
+	if (priv->hwd_status.eer)
+		priv->poll_event = IPA_POLL_EVENT_ERROR;
+	else
+		priv->poll_event = IPA_POLL_EVENT_DONE;
+
+	/* General barrier to avoid re-ordering of priv->poll_event=N and
+	 * waitqueue_active()
+	 */
+	smp_mb();
+
+	/* Threads going to sleep in poll() can miss wakeup, when wakeup is done
+	 * between event check in ipa_poll() and sleeping. Wakeup repeatedly.
+	 */
+	while (waitqueue_active(&priv->waitq)) {
+		wake_up_interruptible(&priv->waitq);
+
+		WARN_ON(delay > IPA_WAKEUP_RETRY_DELAY);
+		usleep_range(delay, delay + 1);
+		delay += delay;
+	}
+
+	mutex_unlock(&priv->lock);
+
+	return IRQ_HANDLED;
+}
+
+static void dnn_start(struct dnn_priv *priv, struct hwd_dnn_descriptor *desc)
+{
+	hwd_dnn_start(priv->id, desc);
+}
+
+static int dnn_parse_entry_addr(struct dnn_priv *priv, int idx, struct drv_dnn_descriptor *desc,
+				struct hwd_dnn_descriptor *hwd_desc)
+{
+	dma_addr_t addr;
+	struct drv_ipa_addr ipa_addr;
+	int j, ret = 0;
+
+	switch (desc->base_addr[idx].purpose) {
+	case DRV_DNN_BASE_ADDR_PURPOSE_OUTPUT:
+	case DRV_DNN_BASE_ADDR_PURPOSE_INPUT:
+		if (copy_from_user(priv->temp_list,
+				   (void __user *)desc->base_addr[idx].addr.list_addr,
+				   sizeof(struct drv_ipa_addr) * (desc->list_num + 1))) {
+			dev_err(priv->dev, "IPA address to iova conversion error: %d\n", __LINE__);
+			ret = -EFAULT;
+			break;
+		}
+
+		hwd_desc->base_addr[idx] = priv->list_paddr[idx];
+		for (j = 0; j < desc->list_num + 1; j++) {
+			ipa_addr = priv->temp_list[j];
+			addr = dnn_ipa_addr_to_iova(priv, ipa_addr);
+			if (addr == 0) {
+				dev_err(priv->dev,
+					"@LIST@ IPA address to iova conversion error: %d\n",
+					__LINE__);
+				ret = -EINVAL;
+				break;
+			}
+			dev_dbg(priv->dev, "@LIST@ %d: fd=%d %llx %x\n", idx,
+				desc->buffer_info[ipa_addr.buffer_index].fd,
+				(u64)hwd_desc->base_addr[idx], (u32)addr);
+			priv->list_vaddr[idx][j] = addr;
+		}
+		break;
+	case DRV_DNN_BASE_ADDR_PURPOSE_AWB:
+		ipa_addr = desc->base_addr[idx].addr.ipa_addr;
+		addr = dnn_ipa_addr_to_iova(priv, ipa_addr);
+		if (addr == 0) {
+			dev_err(priv->dev, "@AWB@ IPA address to iova conversion error: %d\n",
+				__LINE__);
+			ret = -EINVAL;
+			break;
+		}
+		hwd_desc->base_addr[idx] = addr;
+		dev_dbg(priv->dev, "@AWB@ %d: fd=%d %llx\n", idx,
+			desc->buffer_info[ipa_addr.buffer_index].fd, (u64)hwd_desc->base_addr[idx]);
+		break;
+	case DRV_DNN_BASE_ADDR_PURPOSE_TEMPORARY:
+		ipa_addr = desc->base_addr[idx].addr.ipa_addr;
+		addr = dnn_ipa_addr_to_iova(priv, ipa_addr);
+		if (addr == 0) {
+			dev_err(priv->dev, "@TEMP@ IPA address to iova conversion error: %d\n",
+				__LINE__);
+			ret = -EINVAL;
+			break;
+		}
+		hwd_desc->base_addr[idx] = addr;
+		dev_dbg(priv->dev, "@TEMP@ %d: fd=%d %llx\n", idx,
+			desc->buffer_info[ipa_addr.buffer_index].fd, (u64)hwd_desc->base_addr[idx]);
+		break;
+	default:
+		hwd_desc->base_addr[idx] = 0;
+		break;
+	}
+	return ret;
+}
+
+static int dnn_ioctl_start(struct dnn_priv *priv, unsigned long arg)
+{
+	struct drv_dnn_descriptor desc;
+	struct hwd_dnn_descriptor hwd_desc;
+	int i, ret = 0;
+
+	ret = mutex_lock_interruptible(&priv->lock);
+	if (ret)
+		return ret;
+
+	if (priv->status == DRV_IPA_STATE_BUSY) {
+		dev_dbg(priv->dev, "busy: %d\n", priv->status);
+		mutex_unlock(&priv->lock);
+		return -EBUSY;
+	}
+
+	if (copy_from_user(&desc, (void __user *)arg, sizeof(struct drv_dnn_descriptor))) {
+		dev_err(priv->dev, "Descriptor memory access error\n");
+		ret = -EFAULT;
+		goto err1;
+	}
+
+	if (DRV_DNN_BIT_CONFIG_DESC_FINAL != (desc.config_done & DRV_DNN_BIT_CONFIG_DESC_FINAL)) {
+		dev_err(priv->dev, "Descriptor configuration not complete\n");
+		ret = -EINVAL;
+		goto err1;
+	}
+
+	priv->dma_count = 0;
+
+	/* setup buffer */
+	for (i = 0; i < desc.buffer_info_num; i++) {
+		ret = dnn_attach_dma_buf(priv, i, desc.buffer_info);
+		if (ret) {
+			dev_err(priv->dev, "dma buf attach error: index=%d\n", i);
+			goto err2;
+		}
+		dev_dbg(priv->dev, "@buffer[%d]@: fd=%d %s iova=%llx\n", i, desc.buffer_info[i].fd,
+			desc.buffer_info[i].coherent ? "coherent" : "non-coherent",
+			(uint64_t)priv->buffer_iova[i]);
+	}
+
+	/* get iova address of configuration area */
+	hwd_desc.configuration = dnn_ipa_addr_to_iova(priv, desc.configuration);
+	if (hwd_desc.configuration == 0) {
+		dev_err(priv->dev, "Invalid IPA Address: configuration %s: %d\n", __func__,
+			__LINE__);
+		ret = -EINVAL;
+		goto err2;
+	}
+
+	dev_dbg(priv->dev, "@config@: fd=%d %llx\n",
+		desc.buffer_info[desc.configuration.buffer_index].fd,
+		(uint64_t)hwd_desc.configuration);
+
+	for (i = 0; i < DRV_DNN_BASE_ADDR_NUM; i++) {
+		ret = dnn_parse_entry_addr(priv, i, &desc, &hwd_desc);
+		if (ret)
+			goto err2;
+	}
+
+	hwd_desc.configuration_size = desc.configuration_size;
+	hwd_desc.list_num = desc.list_num;
+	hwd_desc.eer_flags_addr = priv->err_flags;
+	hwd_desc.base_addr_flag = desc.base_addr_flag;
+	hwd_desc.config_done = desc.config_done;
+
+	hwd_desc.configuration += desc.configuration_offset;
+
+	dnn_start(priv, &hwd_desc);
+
+	priv->poll_event = IPA_POLL_EVENT_NONE;
+	priv->status = DRV_IPA_STATE_BUSY;
+	enable_irq(priv->irq);
+
+	mutex_unlock(&priv->lock);
+
+	return ret;
+
+err2:
+	dnn_detach_dma_buf(priv);
+err1:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int dnn_ioctl_get_status(struct dnn_priv *priv, unsigned long arg)
+{
+	struct drv_dnn_status status;
+	struct hwd_dnn_status hwd_status;
+	int ret = 0, i;
+
+	ret = mutex_lock_interruptible(&priv->lock);
+	if (ret)
+		return ret;
+
+	if (priv->status == DRV_IPA_STATE_BUSY)
+		hwd_dnn_get_status(priv->id, &hwd_status);
+	else
+		hwd_status = priv->hwd_status;
+
+	status.state = priv->status;
+	mutex_unlock(&priv->lock);
+
+	status.eer_cmd = hwd_status.eer_cmd;
+	status.eer = hwd_status.eer;
+	for (i = 0; i < HWD_DNN_EER_FLAG_NUM; i++)
+		status.eer_flags[i] = priv->err_flags[i];
+
+	if (copy_to_user((void __user *)arg, &status, sizeof(struct drv_dnn_status))) {
+		dev_err(priv->dev, "status memory access error\n");
+		ret = -EFAULT;
+	}
+
+	return ret;
+}
+
+static long dnn_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
+{
+	struct dnn_priv *priv = container_of(fp->private_data, struct dnn_priv, miscdev);
+	int ret = 0;
+
+	switch (cmd) {
+	case IOC_IPA_START:
+		ret = dnn_ioctl_start(priv, arg);
+		break;
+	case IOC_IPA_GET_STATUS:
+		ret = dnn_ioctl_get_status(priv, arg);
+		break;
+	default:
+		ret = -ENOIOCTLCMD;
+		break;
+	}
+
+	return ret;
+}
+
+static __poll_t dnn_poll(struct file *fp, poll_table *wait)
+{
+	struct dnn_priv *priv = container_of(fp->private_data, struct dnn_priv, miscdev);
+	__poll_t mask = 0;
+	unsigned int poll_event;
+
+	poll_wait(fp, &priv->waitq, wait);
+
+	/* Barrier to avoid re-ordering of poll_wait() and event load
+	 * Read barrier here and release barrier in poll_wait() together will
+	 * prevent re-ordering
+	 */
+	smp_rmb();
+	poll_event = priv->poll_event;
+	if (poll_event != IPA_POLL_EVENT_NONE) {
+		mask = EPOLLIN | EPOLLRDNORM;
+		if (poll_event == IPA_POLL_EVENT_ERROR)
+			mask |= EPOLLERR;
+	}
+	return mask;
+}
+
+static const struct file_operations dnn_fops = {
+	.owner = THIS_MODULE,
+	.unlocked_ioctl = dnn_ioctl,
+	.poll = dnn_poll,
+};
+
+static int dnn_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct dnn_priv *priv;
+	int i, ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	mutex_init(&priv->lock);
+
+	/* update DMA mask */
+	priv->dma_coherent = dev->dma_coherent;
+	ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(36));
+	if (ret)
+		return ret;
+
+	priv->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->regs))
+		return PTR_ERR(priv->regs);
+
+	priv->irq = platform_get_irq(pdev, 0);
+	if (priv->irq < 0)
+		return priv->irq;
+
+	ret = devm_request_threaded_irq(dev, priv->irq, dnn_irq, dnn_irq_thread, 0, "dnn", priv);
+	if (ret) {
+		dev_err(dev, "irq request failed\n");
+		return ret;
+	}
+	disable_irq(priv->irq);
+
+	ret = of_property_read_u32(dev->of_node, "index", &priv->id);
+	if (ret) {
+		dev_err(dev, "failed to acquire irq resource\n");
+		return ret;
+	}
+
+	/*
+	 * allocate uncached-memory to hold address-list for DNN operation
+	 * to hold ptr to 32bit addr memory block
+	 *      for each base address (upto HWD_DNN_BASE_ADDR_NUM)
+	 *      for each iteration (up to HWD_DNN_LIST_NUM_MAX)
+	 * uint32_t list_addr [HWD_DNN_BASE_ADDR_NUM] [HWD_DNN_LIST_NUM_MAX];
+	 */
+	priv->list_vaddr[0] =
+		dma_alloc_wc(dev, sizeof(u32) * HWD_DNN_LIST_NUM_MAX * HWD_DNN_BASE_ADDR_NUM,
+			     &priv->list_paddr[0], GFP_KERNEL);
+	if (!priv->list_vaddr[0]) {
+		dev_err(dev, "dma_alloc_wc failed\n");
+		return -ENOMEM;
+	}
+	for (i = 1; i < HWD_DNN_BASE_ADDR_NUM; i++) {
+		priv->list_vaddr[i] = priv->list_vaddr[0] + HWD_DNN_LIST_NUM_MAX * i;
+		priv->list_paddr[i] = priv->list_paddr[0] + sizeof(u32) * HWD_DNN_LIST_NUM_MAX * i;
+	}
+
+	hwd_dnn_initialize(priv->id, priv->regs);
+
+	snprintf(priv->name, sizeof(priv->name), "dnn%d", priv->id);
+	priv->miscdev.minor = MISC_DYNAMIC_MINOR;
+	priv->miscdev.name = priv->name;
+	priv->miscdev.fops = &dnn_fops;
+	ret = misc_register(&priv->miscdev);
+	if (ret) {
+		dev_err(dev, "misc registration failed\n");
+		hwd_dnn_uninitialize(priv->id);
+		dma_free_wc(dev, sizeof(u32) * HWD_DNN_LIST_NUM_MAX * HWD_DNN_BASE_ADDR_NUM,
+			    priv->list_vaddr[0], priv->list_paddr[0]);
+		return ret;
+	}
+
+	priv->dev = dev;
+	platform_set_drvdata(pdev, priv);
+
+	init_waitqueue_head(&priv->waitq);
+
+	priv->status = DRV_IPA_STATE_IDLE;
+	return 0;
+}
+
+static int dnn_remove(struct platform_device *pdev)
+{
+	struct dnn_priv *priv = platform_get_drvdata(pdev);
+
+	misc_deregister(&priv->miscdev);
+	hwd_dnn_uninitialize(priv->id);
+	dma_free_wc(&pdev->dev, sizeof(u32) * HWD_DNN_LIST_NUM_MAX * HWD_DNN_BASE_ADDR_NUM,
+		    priv->list_vaddr[0], priv->list_paddr[0]);
+	return 0;
+}
+
+static const struct of_device_id dnn_of_match[] = {
+	{
+		.compatible = "toshiba,visconti-dnn",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(platform, dnn_of_match);
+
+static struct platform_driver dnn_driver = {
+	.probe = dnn_probe,
+	.remove = dnn_remove,
+	.driver = {
+		.name = "visconti_dnn",
+		.of_match_table = of_match_ptr(dnn_of_match),
+	},
+};
+module_platform_driver(dnn_driver);
+
+MODULE_AUTHOR("Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>");
+MODULE_DESCRIPTION("Toshiba Visconti DNN driver");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/soc/visconti/dnn/hwd_dnn.c b/drivers/soc/visconti/dnn/hwd_dnn.c
new file mode 100644
index 000000000..832040329
--- /dev/null
+++ b/drivers/soc/visconti/dnn/hwd_dnn.c
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+/* Toshiba Visconti DNN Accelerator Support
+ *
+ * (C) Copyright 2022 TOSHIBA CORPORATION
+ * (C) Copyright 2022 Toshiba Electronic Devices & Storage Corporation
+ */
+
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+
+#include "hwd_dnn.h"
+#include "hwd_dnn_reg.h"
+
+#define HWD_DNN_INT_END		BIT(0)
+#define HWD_DNN_INT_EER		BIT(24)
+#define HWD_DNN_INT_UNUSED	(0x003f0100U)
+#define HWD_DNN_INT_MASK_CONFIG (HWD_DNN_INT_UNUSED | HWD_DNN_INT_EER)
+#define HWD_DNN_INT_CLEAR_ALL	(HWD_DNN_INT_END | HWD_DNN_INT_EER)
+#define HWD_DNN_EXE_CONFIG_MODE (0x3U)
+
+#define HWD_DNN_CGATE_ORD_CONFIG BIT(17)
+
+/**
+ * struct hwd_dnn_resources - HWD driver internal resource structure
+ *
+ * @reg: control register
+ * @status: driver status
+ * @eer_flags_addr: Address of execution error flags
+ */
+struct hwd_dnn_resources {
+	struct hwd_dnn_reg *reg;
+	struct hwd_dnn_status status;
+	u32 *eer_flags_addr;
+};
+
+/* HWD driver internal resource */
+static struct hwd_dnn_resources hwd_dnn_resources[HWD_DNN_DEVICE_MAX] = {};
+
+/**
+ * hwd_dnn_initialize() - Initialize DNN device
+ *
+ * @module_id: @ref hwd_dnn_device "id" of the h/w module
+ * @vaddr: register base virtual address
+ * Return: 0 operation completed successfully
+ */
+void hwd_dnn_initialize(u32 module_id, void *vaddr)
+{
+	struct hwd_dnn_resources *res = &hwd_dnn_resources[module_id];
+
+	/* Initialize the device */
+	res->reg = (struct hwd_dnn_reg *)vaddr;
+}
+
+/**
+ * hwd_dnn_uninitialize() - Uninitialize DNN device
+ *
+ * @module_id: @ref hwd_dnn_device "id" of the h/w module
+ */
+void hwd_dnn_uninitialize(u32 module_id)
+{
+	struct hwd_dnn_resources *res = &hwd_dnn_resources[module_id];
+
+	res->reg = NULL;
+}
+
+/**
+ * hwd_dnn_start() - Start DNN device
+ *
+ * @module_id: @ref hwd_dnn_device "id" of the h/w module
+ * @desc: Pointer to descriptor structure
+ */
+void hwd_dnn_start(u32 module_id, const struct hwd_dnn_descriptor *desc)
+{
+	struct hwd_dnn_resources *res = &hwd_dnn_resources[module_id];
+	struct hwd_dnn_reg *reg;
+	u32 base_addr_flag;
+	int i;
+
+	reg = res->reg;
+
+	/* Configure the registers with user provided values */
+	writel(desc->configuration & GENMASK(31, 0), &reg->cfg_addr);
+	writel(desc->configuration_size, &reg->cfg_size);
+	writel(desc->list_num, &reg->cfg_rpt);
+
+	base_addr_flag = desc->base_addr_flag;
+	for (i = 0; i < HWD_DNN_BASE_ADDR_NUM; i++) {
+		if (base_addr_flag & BIT(i)) {
+			/* 1: address list is specified */
+			writel(0U, &reg->base_addr[i]);
+			writel(desc->base_addr[i] & GENMASK(31, 0), &reg->base_list[i]);
+		} else {
+			/* 0: region address is specified */
+			writel(desc->base_addr[i] & GENMASK(31, 0), &reg->base_addr[i]);
+			writel(0U, &reg->base_list[i]);
+		}
+	}
+
+	writel(base_addr_flag, &reg->base_list_cfg);
+
+	/* clear and unmask interrupts */
+	writel(HWD_DNN_INT_CLEAR_ALL, &reg->intstat);
+	writel(HWD_DNN_INT_MASK_CONFIG, &reg->intmask);
+
+	res->status.eer_cmd = 0;
+	res->status.eer = 0;
+	res->eer_flags_addr = desc->eer_flags_addr;
+
+	/*Invalidate load command in Clock Gating Control Register */
+	writel(HWD_DNN_CGATE_ORD_CONFIG, &reg->cgate_ord);
+
+	/* Sync memory barrier */
+	dsb(st);
+
+	/* Start the device */
+	writel(HWD_DNN_EXE_CONFIG_MODE, &reg->exe);
+}
+
+/**
+ * hwd_dnn_irq_handler() - HWD DNN interrupt handler
+ *
+ * @module_id: id of the h/w module
+ * Return: HWD_DNN_EVENT_EXEC_DONE Bit field saying Configuration processing is completed
+ */
+u32 hwd_dnn_irq_handler(u32 module_id)
+{
+	struct hwd_dnn_resources *res = &hwd_dnn_resources[module_id];
+	struct hwd_dnn_reg *reg;
+	u32 event = 0;
+	u32 int_stat;
+	u32 cause;
+	int i;
+
+	reg = res->reg;
+
+	/* Read the interrupt causes */
+	cause = readl(&reg->mask_intstat);
+
+	/* Read the interrupt status register */
+	int_stat = readl(&reg->intstat);
+
+	/*
+	 * Read the error command.
+	 * Clearing DNN_INTSTAT.EER interrupt cause initializes the error command register.
+	 * Read error command before clearing the interrupt cause.
+	 */
+	res->status.eer_cmd = readl(&reg->int_eer_cmd);
+
+	/* Clear the interrupt causes */
+	writel(cause, &reg->intstat);
+
+	if (cause & HWD_DNN_INT_END) {
+		/* Get EER flags, if requestd */
+		if (res->eer_flags_addr)
+			for (i = 0; i < HWD_DNN_EER_FLAG_NUM; i++)
+				res->eer_flags_addr[i] = readl(&reg->eer_flag[i]);
+
+		event = HWD_DNN_EVENT_EXEC_DONE;
+	}
+
+	if (int_stat & HWD_DNN_INT_EER) {
+		/* Operation error occurred */
+		res->status.eer = 1;
+	}
+
+	return event;
+}
+
+/**
+ * hwd_dnn_get_status() - HWD DNN Get Status
+ *
+ * @module_id: @ref hwd_dnn_device "id" of the h/w module
+ * @status: Pointer to status structure
+ */
+void hwd_dnn_get_status(u32 module_id, struct hwd_dnn_status *status)
+{
+	const struct hwd_dnn_resources *res = &hwd_dnn_resources[module_id];
+
+	/* Update device status */
+	status->eer_cmd = res->status.eer_cmd;
+	status->eer = res->status.eer;
+}
diff --git a/drivers/soc/visconti/dnn/hwd_dnn.h b/drivers/soc/visconti/dnn/hwd_dnn.h
new file mode 100644
index 000000000..84425990c
--- /dev/null
+++ b/drivers/soc/visconti/dnn/hwd_dnn.h
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */
+/* Toshiba Visconti DNN Accelerator Support
+ *
+ * (C) Copyright 2022 TOSHIBA CORPORATION
+ * (C) Copyright 2022 Toshiba Electronic Devices & Storage Corporation
+ */
+
+#ifndef HWD_DNN_H
+#define HWD_DNN_H
+
+/**
+ * enum hwd_dnn_device_id - device ids for available DNN Accelerators
+ */
+enum hwd_dnn_device_id { HWD_DNN_DEVICE_0 = 0, HWD_DNN_DEVICE_1 = 1, HWD_DNN_DEVICE_MAX = 2 };
+
+/* DNN events returned by irq handler */
+#define HWD_DNN_EVENT_EXEC_DONE (1U)
+
+/* number of base address available for DNN */
+#define HWD_DNN_BASE_ADDR_NUM (8U)
+
+/* number of error flag registers */
+#define HWD_DNN_EER_FLAG_NUM (32U)
+
+/* DNN hardware can execute 1024 iterations for different dataset at a time */
+#define HWD_DNN_LIST_NUM_MAX (1024U)
+
+/**
+ * struct hwd_dnn_status - DNN HWD Driver Status
+ *
+ * @eer_cmd:  Error Command
+ * @eer:      Execution Error
+ * @reserved: Padding
+ */
+struct hwd_dnn_status {
+	u32 eer_cmd;
+	u32 eer : 1;
+	u32 reserved : 31;
+};
+
+/**
+ * struct hwd_dnn_descriptor - HWD DNN Descriptor
+ *
+ * @configuration: Configuration data
+ * @configuration_size: Configuration data size
+ * @list_num: Number of input/output list
+ * @base_addr: Base Address
+ * @eer_flags_addr: Address of storing execution error flags
+ * @base_addr_flag: Bit-fields of Base Address list config. If 1, address list. If 0, fixed address
+ * @config_done: Flags of called configuration
+ */
+struct hwd_dnn_descriptor {
+	u32 configuration;
+	u32 configuration_size;
+	u32 list_num;
+	u32 base_addr[HWD_DNN_BASE_ADDR_NUM];
+	u32 *eer_flags_addr;
+	u32 base_addr_flag;
+	u16 config_done;
+};
+
+void hwd_dnn_initialize(u32 module_id, void *vaddr);
+void hwd_dnn_uninitialize(u32 module_id);
+void hwd_dnn_start(u32 module_id, const struct hwd_dnn_descriptor *desc);
+u32 hwd_dnn_irq_handler(u32 module_id);
+void hwd_dnn_get_status(u32 module_id, struct hwd_dnn_status *status);
+
+#endif /* HWD_DNN_H */
diff --git a/drivers/soc/visconti/dnn/hwd_dnn_reg.h b/drivers/soc/visconti/dnn/hwd_dnn_reg.h
new file mode 100644
index 000000000..c1271e092
--- /dev/null
+++ b/drivers/soc/visconti/dnn/hwd_dnn_reg.h
@@ -0,0 +1,228 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */
+/* Toshiba Visconti DNN Accelerator Support
+ *
+ * (C) Copyright 2022 TOSHIBA CORPORATION
+ * (C) Copyright 2022 Toshiba Electronic Devices & Storage Corporation
+ */
+
+#ifndef HWD_DNN_REG_H
+#define HWD_DNN_REG_H
+
+/**
+ * struct hwd_dnn_reg - DNN register address struct
+ */
+struct hwd_dnn_reg {
+	u32 version;
+	u32 exe;
+	u32 reserved_a_1;
+	u32 intstat;
+	u32 intmask;
+	u32 mask_intstat;
+	u32 reserved_a_2;
+	u32 int_eer_cmd;
+	u32 reserved_b_1[8];
+	u32 cfg_cid;
+	u32 cfg_cnm;
+	u32 reserved_b_2[10];
+	u32 reserved_a_3;
+	u32 cgate_ord;
+	u32 reserved_b_3[2];
+	u32 eer_flag[32];
+	u32 cfg_addr;
+	u32 cfg_size;
+	u32 cfg_rpt;
+	u32 reserved_b_4[1];
+	u32 base_list_cfg;
+	u32 reserved_b_5[11];
+	u32 base_addr[8];
+	u32 reserved_b_6[24];
+	u32 base_list[8];
+	u32 reserved_b_7[8];
+	u32 cmd_load;
+	u32 ld_format;
+	u32 reserved_b_8[14];
+	u32 ld_g_size0;
+	u32 ld_g_size1;
+	u32 reserved_b_9[2];
+	u32 reserved_a_4;
+	u32 reserved_b_10[1];
+	u32 ld_g_base_id;
+	u32 ld_g_offset;
+	u32 ld_g_lptch;
+	u32 ld_g_cptch;
+	u32 ld_g_vptch;
+	u32 reserved_b_11[5];
+	u32 ld_l_size0;
+	u32 ld_l_size1;
+	u32 reserved_b_12[2];
+	u32 ld_l_addr;
+	u32 reserved_b_13[3];
+	u32 ld_l_lptch;
+	u32 ld_l_cptch;
+	u32 ld_l_vptch;
+	u32 reserved_b_14[17];
+	u32 reserved_a_5;
+	u32 reserved_b_15[3];
+	u32 cmd_store;
+	u32 st_format;
+	u32 reserved_b_16[14];
+	u32 st_g_size0;
+	u32 st_g_size1;
+	u32 reserved_b_17[2];
+	u32 reserved_a_6;
+	u32 reserved_b_18[1];
+	u32 st_g_base_id;
+	u32 st_g_offset;
+	u32 st_g_lptch;
+	u32 st_g_cptch;
+	u32 st_g_vptch;
+	u32 reserved_b_19[5];
+	u32 st_l_size0;
+	u32 st_l_size1;
+	u32 reserved_b_20[2];
+	u32 st_l_addr;
+	u32 reserved_b_21[3];
+	u32 st_l_lptch;
+	u32 st_l_cptch;
+	u32 st_l_vptch;
+	u32 reserved_b_22[17];
+	u32 reserved_a_7;
+	u32 reserved_b_23[3];
+	u32 cmd_copy;
+	u32 reserved_b_24[15];
+	u32 cp_src_size0;
+	u32 cp_src_size1;
+	u32 reserved_b_25[2];
+	u32 cp_src_addr;
+	u32 reserved_b_26[3];
+	u32 cp_src_lptch;
+	u32 cp_src_cptch;
+	u32 reserved_a_8;
+	u32 reserved_b_27[5];
+	u32 cp_dst_size0;
+	u32 cp_dst_size1;
+	u32 reserved_b_28[2];
+	u32 cp_dst_addr;
+	u32 reserved_b_29[3];
+	u32 cp_dst_lptch;
+	u32 cp_dst_cptch;
+	u32 reserved_a_9;
+	u32 reserved_b_30[17];
+	u32 reserved_a_10;
+	u32 reserved_b_31[3];
+	u32 cmd_fill;
+	u32 reserved_b_32[1];
+	u32 fl_cfg;
+	u32 reserved_b_33[13];
+	u32 fl_src_size0;
+	u32 fl_src_size1;
+	u32 reserved_b_34[2];
+	u32 fl_src_addr;
+	u32 reserved_b_35[3];
+	u32 fl_src_lptch;
+	u32 fl_src_cptch;
+	u32 reserved_b_36[6];
+	u32 fl_dst_size0;
+	u32 fl_dst_size1;
+	u32 reserved_b_37[2];
+	u32 fl_dst_addr;
+	u32 reserved_b_38[3];
+	u32 fl_dst_lptch;
+	u32 fl_dst_cptch;
+	u32 reserved_b_39[22];
+	u32 cmd_sync;
+	u32 reserved_b_40[1];
+	u32 cmd_srst;
+	u32 reserved_b_41[1];
+	u32 cmd_halt;
+	u32 reserved_b_42[3];
+	u32 cmd_finish;
+	u32 reserved_b_43[119];
+	u32 cmd_exe;
+	u32 exe_mode;
+	u32 reserved_b_44[14];
+	u32 exe_inf_size0;
+	u32 exe_inf_size1;
+	u32 reserved_b_45[2];
+	u32 exe_inf_addr;
+	u32 reserved_b_46[3];
+	u32 exe_inf_lptch;
+	u32 exe_inf_cptch;
+	u32 reserved_b_47[26];
+	u32 exe_conv_bias_addr;
+	u32 reserved_b_48[27];
+	u32 exe_conv_wt_size0;
+	u32 exe_conv_wt_size1;
+	u32 reserved_b_49[2];
+	u32 exe_conv_wt_addr;
+	u32 reserved_b_50[3];
+	u32 exe_conv_wt_lptch;
+	u32 exe_conv_wt_cptch;
+	u32 exe_conv_wt_vptch;
+	u32 reserved_b_51[9];
+	u32 exe_conv_acv_addr;
+	u32 reserved_b_52[3];
+	u32 exe_conv_acv_lptch;
+	u32 exe_conv_acv_cptch;
+	u32 reserved_b_53[18];
+	u32 exe_conv_out;
+	u32 reserved_b_54[11];
+	u32 actv_tbl_range;
+	u32 reserved_a_11;
+	u32 actv_tbl_prm;
+	u32 reserved_b_55[5];
+	u32 exe_pool_size;
+	u32 reserved_b_56[43];
+	u32 exe_pool_out;
+	u32 exe_pool_pe_crop;
+	u32 reserved_b_57[10];
+	u32 exe_norm_g_prm;
+	u32 reserved_b_58[15];
+	u32 exe_sav_max_prm;
+	u32 reserved_b_59[35];
+	u32 exe_norm_out;
+	u32 reserved_b_60[23];
+	u32 exe_outf_addr;
+	u32 reserved_b_61[3];
+	u32 exe_outf_lptch;
+	u32 exe_outf_cptch;
+	u32 reserved_b_62[102];
+	u32 reserved_a_12;
+	u32 reserved_b_63[8];
+	u32 reserved_a_13;
+	u32 reserved_a_14;
+	u32 reserved_a_15;
+	u32 reserved_b_64[4];
+	u32 reserved_a_16;
+	u32 reserved_a_17;
+	u32 reserved_b_65[46];
+	u32 exe_pool_pa3_0;
+	u32 exe_pool_pa3_2;
+	u32 exe_pool_pa3_4;
+	u32 exe_pool_pa3_6;
+	u32 exe_pool_pa3_8;
+	u32 exe_pool_pa3_10;
+	u32 exe_pool_pa3_12;
+	u32 exe_pool_pa3_14;
+	u32 exe_pool_pa3_16;
+	u32 exe_pool_pa3_18;
+	u32 exe_pool_pa3_20;
+	u32 exe_pool_pa3_22;
+	u32 exe_pool_pa3_24;
+	u32 reserved_b_66[3];
+	u32 exe_pool_pa2_0;
+	u32 exe_pool_pa2_2;
+	u32 exe_pool_pa2_4;
+	u32 exe_pool_pa2_6;
+	u32 exe_pool_pa2_8;
+	u32 exe_pool_pa2_10;
+	u32 exe_pool_pa2_12;
+	u32 exe_pool_pa2_14;
+	u32 exe_pool_pa2_16;
+	u32 exe_pool_pa2_18;
+	u32 exe_pool_pa2_20;
+	u32 exe_pool_pa2_22;
+	u32 exe_pool_pa2_24;
+};
+
+#endif /* HWD_DNN_REG_H */
diff --git a/drivers/soc/visconti/uapi/dnn.h b/drivers/soc/visconti/uapi/dnn.h
new file mode 100644
index 000000000..972c39655
--- /dev/null
+++ b/drivers/soc/visconti/uapi/dnn.h
@@ -0,0 +1,77 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/* Toshiba Visconti DNN Accelerator Support
+ *
+ * (C) Copyright 2022 TOSHIBA CORPORATION
+ * (C) Copyright 2022 Toshiba Electronic Devices & Storage Corporation
+ */
+
+#ifndef _UAPI_LINUX_DNN_H
+#define _UAPI_LINUX_DNN_H
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+#include "ipa.h"
+
+#define DRV_DNN_BIT_CONFIG_DESC_FINAL (0x8000U)
+#define DRV_DNN_BUFFER_INDEX_MAX      (15)
+
+#define DRV_DNN_BASE_ADDR_NUM (8U) /* DNN number of base address */
+
+#define DRV_DNN_BASE_ADDR_PURPOSE_INPUT	    (1U)
+#define DRV_DNN_BASE_ADDR_PURPOSE_OUTPUT    (2U)
+#define DRV_DNN_BASE_ADDR_PURPOSE_AWB	    (3U)
+#define DRV_DNN_BASE_ADDR_PURPOSE_TEMPORARY (4U)
+
+/**
+ * struct drv_dnn_status - DNN IPA status for IOC_IPA_GET_STATUS
+ *
+ * @state:     State of driver
+ * @eer_cmd:   Execution error command
+ * @eer:       Execution error
+ * @reserved:  Padding
+ * @eer_flags: Execution error flags
+ */
+struct drv_dnn_status {
+	enum drv_ipa_state state;
+	u32 eer_cmd;
+	u32 eer : 1;
+	u32 reserved : 31;
+	u32 eer_flags[32];
+};
+
+struct drv_dnn_base_addr {
+	u32 purpose;
+	union {
+		struct drv_ipa_addr ipa_addr;
+		uintptr_t list_addr;
+	} addr;
+};
+
+/**
+ * struct drv_dnn_descriptor - DNN IPA Descriptor for IOC_IPA_START
+ *
+ * @configuration:        Address of configuration data
+ * @configuration_offset: Configuration offset
+ * @configuration_size:   Configuration data size
+ * @list_num:             Number of input/output list
+ * @base_addr:            Base addresses
+ * @base_addr_flag:       Bit-fields of base_addr list config
+ * - if 0, fixed address
+ * - if 1, address list
+ * @config_done:          Flags of called configuration
+ * @buffer_info:          Table of buffer information
+ * @buffer_info_num:      Number of buffer_info
+ */
+struct drv_dnn_descriptor {
+	struct drv_ipa_addr configuration;
+	u32 configuration_offset;
+	u32 configuration_size;
+	u32 list_num;
+	struct drv_dnn_base_addr base_addr[DRV_DNN_BASE_ADDR_NUM];
+	u32 base_addr_flag;
+	u16 config_done;
+	struct drv_ipa_buffer_info buffer_info[DRV_DNN_BUFFER_INDEX_MAX];
+	s32 buffer_info_num;
+};
+
+#endif /* _UAPI_LINUX_DNN_H */
-- 
2.17.1



^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [PATCH 3/4] soc: visconti: Add Toshiba Visconti DNN image processing accelerator
@ 2022-04-28 13:11   ` Yuji Ishikawa
  0 siblings, 0 replies; 36+ messages in thread
From: Yuji Ishikawa @ 2022-04-28 13:11 UTC (permalink / raw)
  To: Rob Herring, Nobuhiro Iwamatsu, Sumit Semwal, Christian König
  Cc: linux-arm-kernel, linux-kernel, linux-media, dri-devel,
	linaro-mm-sig, yuji2.ishikawa

Add support to DNN image processing accelerator on Toshiba Visconti ARM SoCs.
The accelerator is applicable to DNN inference tasks.

Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
---
 drivers/soc/visconti/Kconfig           |   6 +
 drivers/soc/visconti/Makefile          |   2 +
 drivers/soc/visconti/dnn/Makefile      |   6 +
 drivers/soc/visconti/dnn/dnn.c         | 533 +++++++++++++++++++++++++
 drivers/soc/visconti/dnn/hwd_dnn.c     | 183 +++++++++
 drivers/soc/visconti/dnn/hwd_dnn.h     |  68 ++++
 drivers/soc/visconti/dnn/hwd_dnn_reg.h | 228 +++++++++++
 drivers/soc/visconti/uapi/dnn.h        |  77 ++++
 8 files changed, 1103 insertions(+)
 create mode 100644 drivers/soc/visconti/dnn/Makefile
 create mode 100644 drivers/soc/visconti/dnn/dnn.c
 create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.c
 create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.h
 create mode 100644 drivers/soc/visconti/dnn/hwd_dnn_reg.h
 create mode 100644 drivers/soc/visconti/uapi/dnn.h

diff --git a/drivers/soc/visconti/Kconfig b/drivers/soc/visconti/Kconfig
index 8b1378917..a25287d0c 100644
--- a/drivers/soc/visconti/Kconfig
+++ b/drivers/soc/visconti/Kconfig
@@ -1 +1,7 @@
+if ARCH_VISCONTI
+
+config VISCONTI_DNN
+    bool "Visconti DNN driver"
+
+endif
 
diff --git a/drivers/soc/visconti/Makefile b/drivers/soc/visconti/Makefile
index 8d710da08..b9bd0f7e2 100644
--- a/drivers/soc/visconti/Makefile
+++ b/drivers/soc/visconti/Makefile
@@ -4,3 +4,5 @@
 #
 
 obj-y += ipa_common.o
+
+obj-$(CONFIG_VISCONTI_DNN) += dnn/
diff --git a/drivers/soc/visconti/dnn/Makefile b/drivers/soc/visconti/dnn/Makefile
new file mode 100644
index 000000000..52d57b60d
--- /dev/null
+++ b/drivers/soc/visconti/dnn/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the Visconti DNN driver
+#
+
+obj-y += dnn.o hwd_dnn.o
diff --git a/drivers/soc/visconti/dnn/dnn.c b/drivers/soc/visconti/dnn/dnn.c
new file mode 100644
index 000000000..aeff92037
--- /dev/null
+++ b/drivers/soc/visconti/dnn/dnn.c
@@ -0,0 +1,533 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+/* Toshiba Visconti DNN Accelerator Support
+ *
+ * (C) Copyright 2022 TOSHIBA CORPORATION
+ * (C) Copyright 2022 Toshiba Electronic Devices & Storage Corporation
+ */
+
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/poll.h>
+#include <linux/wait.h>
+
+#include "../ipa_common.h"
+#include "../uapi/dnn.h"
+#include "hwd_dnn.h"
+
+struct dnn_priv {
+	struct device *dev;
+	struct miscdevice miscdev;
+	struct mutex lock;
+	void __iomem *regs;
+	int irq;
+	wait_queue_head_t waitq;
+	enum drv_ipa_state status;
+	unsigned int poll_event;
+	int id;
+	char name[16];
+	bool dma_coherent;
+	struct hwd_dnn_status hwd_status;
+
+	u32 *list_vaddr[DRV_DNN_BASE_ADDR_NUM];
+	dma_addr_t list_paddr[DRV_DNN_BASE_ADDR_NUM];
+	unsigned int err_flags[HWD_DNN_EER_FLAG_NUM];
+
+	struct dma_buf_attachment *dba[DRV_DNN_BUFFER_INDEX_MAX];
+	struct sg_table *sgt[DRV_DNN_BUFFER_INDEX_MAX];
+	enum dma_data_direction dma_dir[DRV_DNN_BUFFER_INDEX_MAX];
+	unsigned int dma_count;
+
+	dma_addr_t buffer_iova[DRV_DNN_BUFFER_INDEX_MAX];
+
+	struct drv_ipa_addr temp_list[HWD_DNN_LIST_NUM_MAX];
+};
+
+static uint32_t dnn_ipa_addr_to_iova(struct dnn_priv *priv, struct drv_ipa_addr addr)
+{
+	u32 iova = 0;
+
+	if (addr.buffer_index < priv->dma_count &&
+	    addr.offset < priv->dba[addr.buffer_index]->dmabuf->size)
+		iova = priv->buffer_iova[addr.buffer_index] + addr.offset;
+	return iova;
+}
+
+static int dnn_attach_dma_buf(struct dnn_priv *priv, unsigned int buffer_index,
+			      struct drv_ipa_buffer_info buffer_info[DRV_DNN_BUFFER_INDEX_MAX])
+{
+	int ret = 0;
+	dma_addr_t addr;
+
+	if (buffer_index >= DRV_DNN_BUFFER_INDEX_MAX) {
+		dev_err(priv->dev, "Buffer index invalid: index=%d\n", buffer_index);
+		return -EINVAL;
+	}
+
+	switch (buffer_info[buffer_index].direction) {
+	case DRV_IPA_DIR_NONE:
+		priv->dma_dir[priv->dma_count] = DMA_NONE;
+		break;
+	case DRV_IPA_DIR_TO_DEVICE:
+		priv->dma_dir[priv->dma_count] = DMA_TO_DEVICE;
+		break;
+	case DRV_IPA_DIR_FROM_DEVICE:
+		priv->dma_dir[priv->dma_count] = DMA_FROM_DEVICE;
+		break;
+	case DRV_IPA_DIR_BIDIRECTION:
+		priv->dma_dir[priv->dma_count] = DMA_BIDIRECTIONAL;
+		break;
+	default:
+		dev_err(priv->dev, "DMA direction invalid: index=%d dir=%d\n", buffer_index,
+			buffer_info[buffer_index].direction);
+		return -EINVAL;
+	}
+
+	if (!buffer_info[buffer_index].coherent) {
+		priv->dev->dma_coherent = false;
+		if (priv->dma_coherent)
+			priv->dma_dir[priv->dma_count] = DMA_NONE;
+	}
+
+	ret = ipa_attach_dmabuf(priv->dev, buffer_info[buffer_index].fd,
+				&priv->dba[priv->dma_count], &priv->sgt[priv->dma_count], &addr,
+				priv->dma_dir[priv->dma_count]);
+	if (ret == 0) {
+		priv->dma_count++;
+		priv->buffer_iova[buffer_index] = addr;
+	}
+
+	priv->dev->dma_coherent = priv->dma_coherent;
+
+	return ret;
+}
+
+static void dnn_detach_dma_buf(struct dnn_priv *priv)
+{
+	struct dma_buf *dmabuf;
+	int i;
+
+	for (i = 0; i < priv->dma_count; i++) {
+		dmabuf = priv->dba[i]->dmabuf;
+		dma_buf_unmap_attachment(priv->dba[i], priv->sgt[i], priv->dma_dir[i]);
+		dma_buf_detach(dmabuf, priv->dba[i]);
+		dma_buf_put(dmabuf);
+	}
+}
+
+static irqreturn_t dnn_irq(int irq, void *dev_id)
+{
+	struct dnn_priv *priv = dev_id;
+	unsigned int event;
+
+	event = hwd_dnn_irq_handler(priv->id);
+
+	if (event & HWD_DNN_EVENT_EXEC_DONE) {
+		disable_irq_nosync(priv->irq);
+		return IRQ_WAKE_THREAD;
+	}
+
+	return IRQ_NONE;
+}
+
+static irqreturn_t dnn_irq_thread(int irq, void *dev_id)
+{
+	struct dnn_priv *priv = dev_id;
+	unsigned long delay = 1;
+
+	mutex_lock(&priv->lock);
+	dnn_detach_dma_buf(priv);
+
+	hwd_dnn_get_status(priv->id, &priv->hwd_status);
+
+	priv->status = DRV_IPA_STATE_IDLE;
+
+	/* status should be updated before poll_event so that
+	 * when poll() returns, user context must observe state as idle
+	 */
+	smp_wmb();
+
+	if (priv->hwd_status.eer)
+		priv->poll_event = IPA_POLL_EVENT_ERROR;
+	else
+		priv->poll_event = IPA_POLL_EVENT_DONE;
+
+	/* General barrier to avoid re-ordering of priv->poll_event=N and
+	 * waitqueue_active()
+	 */
+	smp_mb();
+
+	/* Threads going to sleep in poll() can miss wakeup, when wakeup is done
+	 * between event check in ipa_poll() and sleeping. Wakeup repeatedly.
+	 */
+	while (waitqueue_active(&priv->waitq)) {
+		wake_up_interruptible(&priv->waitq);
+
+		WARN_ON(delay > IPA_WAKEUP_RETRY_DELAY);
+		usleep_range(delay, delay + 1);
+		delay += delay;
+	}
+
+	mutex_unlock(&priv->lock);
+
+	return IRQ_HANDLED;
+}
+
+static void dnn_start(struct dnn_priv *priv, struct hwd_dnn_descriptor *desc)
+{
+	hwd_dnn_start(priv->id, desc);
+}
+
+static int dnn_parse_entry_addr(struct dnn_priv *priv, int idx, struct drv_dnn_descriptor *desc,
+				struct hwd_dnn_descriptor *hwd_desc)
+{
+	dma_addr_t addr;
+	struct drv_ipa_addr ipa_addr;
+	int j, ret = 0;
+
+	switch (desc->base_addr[idx].purpose) {
+	case DRV_DNN_BASE_ADDR_PURPOSE_OUTPUT:
+	case DRV_DNN_BASE_ADDR_PURPOSE_INPUT:
+		if (copy_from_user(priv->temp_list,
+				   (void __user *)desc->base_addr[idx].addr.list_addr,
+				   sizeof(struct drv_ipa_addr) * (desc->list_num + 1))) {
+			dev_err(priv->dev, "IPA address to iova conversion error: %d\n", __LINE__);
+			ret = -EFAULT;
+			break;
+		}
+
+		hwd_desc->base_addr[idx] = priv->list_paddr[idx];
+		for (j = 0; j < desc->list_num + 1; j++) {
+			ipa_addr = priv->temp_list[j];
+			addr = dnn_ipa_addr_to_iova(priv, ipa_addr);
+			if (addr == 0) {
+				dev_err(priv->dev,
+					"@LIST@ IPA address to iova conversion error: %d\n",
+					__LINE__);
+				ret = -EINVAL;
+				break;
+			}
+			dev_dbg(priv->dev, "@LIST@ %d: fd=%d %llx %x\n", idx,
+				desc->buffer_info[ipa_addr.buffer_index].fd,
+				(u64)hwd_desc->base_addr[idx], (u32)addr);
+			priv->list_vaddr[idx][j] = addr;
+		}
+		break;
+	case DRV_DNN_BASE_ADDR_PURPOSE_AWB:
+		ipa_addr = desc->base_addr[idx].addr.ipa_addr;
+		addr = dnn_ipa_addr_to_iova(priv, ipa_addr);
+		if (addr == 0) {
+			dev_err(priv->dev, "@AWB@ IPA address to iova conversion error: %d\n",
+				__LINE__);
+			ret = -EINVAL;
+			break;
+		}
+		hwd_desc->base_addr[idx] = addr;
+		dev_dbg(priv->dev, "@AWB@ %d: fd=%d %llx\n", idx,
+			desc->buffer_info[ipa_addr.buffer_index].fd, (u64)hwd_desc->base_addr[idx]);
+		break;
+	case DRV_DNN_BASE_ADDR_PURPOSE_TEMPORARY:
+		ipa_addr = desc->base_addr[idx].addr.ipa_addr;
+		addr = dnn_ipa_addr_to_iova(priv, ipa_addr);
+		if (addr == 0) {
+			dev_err(priv->dev, "@TEMP@ IPA address to iova conversion error: %d\n",
+				__LINE__);
+			ret = -EINVAL;
+			break;
+		}
+		hwd_desc->base_addr[idx] = addr;
+		dev_dbg(priv->dev, "@TEMP@ %d: fd=%d %llx\n", idx,
+			desc->buffer_info[ipa_addr.buffer_index].fd, (u64)hwd_desc->base_addr[idx]);
+		break;
+	default:
+		hwd_desc->base_addr[idx] = 0;
+		break;
+	}
+	return ret;
+}
+
+static int dnn_ioctl_start(struct dnn_priv *priv, unsigned long arg)
+{
+	struct drv_dnn_descriptor desc;
+	struct hwd_dnn_descriptor hwd_desc;
+	int i, ret = 0;
+
+	ret = mutex_lock_interruptible(&priv->lock);
+	if (ret)
+		return ret;
+
+	if (priv->status == DRV_IPA_STATE_BUSY) {
+		dev_dbg(priv->dev, "busy: %d\n", priv->status);
+		mutex_unlock(&priv->lock);
+		return -EBUSY;
+	}
+
+	if (copy_from_user(&desc, (void __user *)arg, sizeof(struct drv_dnn_descriptor))) {
+		dev_err(priv->dev, "Descriptor memory access error\n");
+		ret = -EFAULT;
+		goto err1;
+	}
+
+	if (DRV_DNN_BIT_CONFIG_DESC_FINAL != (desc.config_done & DRV_DNN_BIT_CONFIG_DESC_FINAL)) {
+		dev_err(priv->dev, "Descriptor configuration not complete\n");
+		ret = -EINVAL;
+		goto err1;
+	}
+
+	priv->dma_count = 0;
+
+	/* setup buffer */
+	for (i = 0; i < desc.buffer_info_num; i++) {
+		ret = dnn_attach_dma_buf(priv, i, desc.buffer_info);
+		if (ret) {
+			dev_err(priv->dev, "dma buf attach error: index=%d\n", i);
+			goto err2;
+		}
+		dev_dbg(priv->dev, "@buffer[%d]@: fd=%d %s iova=%llx\n", i, desc.buffer_info[i].fd,
+			desc.buffer_info[i].coherent ? "coherent" : "non-coherent",
+			(uint64_t)priv->buffer_iova[i]);
+	}
+
+	/* get iova address of configuration area */
+	hwd_desc.configuration = dnn_ipa_addr_to_iova(priv, desc.configuration);
+	if (hwd_desc.configuration == 0) {
+		dev_err(priv->dev, "Invalid IPA Address: configuration %s: %d\n", __func__,
+			__LINE__);
+		ret = -EINVAL;
+		goto err2;
+	}
+
+	dev_dbg(priv->dev, "@config@: fd=%d %llx\n",
+		desc.buffer_info[desc.configuration.buffer_index].fd,
+		(uint64_t)hwd_desc.configuration);
+
+	for (i = 0; i < DRV_DNN_BASE_ADDR_NUM; i++) {
+		ret = dnn_parse_entry_addr(priv, i, &desc, &hwd_desc);
+		if (ret)
+			goto err2;
+	}
+
+	hwd_desc.configuration_size = desc.configuration_size;
+	hwd_desc.list_num = desc.list_num;
+	hwd_desc.eer_flags_addr = priv->err_flags;
+	hwd_desc.base_addr_flag = desc.base_addr_flag;
+	hwd_desc.config_done = desc.config_done;
+
+	hwd_desc.configuration += desc.configuration_offset;
+
+	dnn_start(priv, &hwd_desc);
+
+	priv->poll_event = IPA_POLL_EVENT_NONE;
+	priv->status = DRV_IPA_STATE_BUSY;
+	enable_irq(priv->irq);
+
+	mutex_unlock(&priv->lock);
+
+	return ret;
+
+err2:
+	dnn_detach_dma_buf(priv);
+err1:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int dnn_ioctl_get_status(struct dnn_priv *priv, unsigned long arg)
+{
+	struct drv_dnn_status status;
+	struct hwd_dnn_status hwd_status;
+	int ret = 0, i;
+
+	ret = mutex_lock_interruptible(&priv->lock);
+	if (ret)
+		return ret;
+
+	if (priv->status == DRV_IPA_STATE_BUSY)
+		hwd_dnn_get_status(priv->id, &hwd_status);
+	else
+		hwd_status = priv->hwd_status;
+
+	status.state = priv->status;
+	mutex_unlock(&priv->lock);
+
+	status.eer_cmd = hwd_status.eer_cmd;
+	status.eer = hwd_status.eer;
+	for (i = 0; i < HWD_DNN_EER_FLAG_NUM; i++)
+		status.eer_flags[i] = priv->err_flags[i];
+
+	if (copy_to_user((void __user *)arg, &status, sizeof(struct drv_dnn_status))) {
+		dev_err(priv->dev, "status memory access error\n");
+		ret = -EFAULT;
+	}
+
+	return ret;
+}
+
+static long dnn_ioctl(struct file *fp, unsigned int cmd, unsigned long arg)
+{
+	struct dnn_priv *priv = container_of(fp->private_data, struct dnn_priv, miscdev);
+	int ret = 0;
+
+	switch (cmd) {
+	case IOC_IPA_START:
+		ret = dnn_ioctl_start(priv, arg);
+		break;
+	case IOC_IPA_GET_STATUS:
+		ret = dnn_ioctl_get_status(priv, arg);
+		break;
+	default:
+		ret = -ENOIOCTLCMD;
+		break;
+	}
+
+	return ret;
+}
+
+static __poll_t dnn_poll(struct file *fp, poll_table *wait)
+{
+	struct dnn_priv *priv = container_of(fp->private_data, struct dnn_priv, miscdev);
+	__poll_t mask = 0;
+	unsigned int poll_event;
+
+	poll_wait(fp, &priv->waitq, wait);
+
+	/* Barrier to avoid re-ordering of poll_wait() and event load
+	 * Read barrier here and release barrier in poll_wait() together will
+	 * prevent re-ordering
+	 */
+	smp_rmb();
+	poll_event = priv->poll_event;
+	if (poll_event != IPA_POLL_EVENT_NONE) {
+		mask = EPOLLIN | EPOLLRDNORM;
+		if (poll_event == IPA_POLL_EVENT_ERROR)
+			mask |= EPOLLERR;
+	}
+	return mask;
+}
+
+static const struct file_operations dnn_fops = {
+	.owner = THIS_MODULE,
+	.unlocked_ioctl = dnn_ioctl,
+	.poll = dnn_poll,
+};
+
+static int dnn_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct dnn_priv *priv;
+	int i, ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	mutex_init(&priv->lock);
+
+	/* update DMA mask */
+	priv->dma_coherent = dev->dma_coherent;
+	ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(36));
+	if (ret)
+		return ret;
+
+	priv->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(priv->regs))
+		return PTR_ERR(priv->regs);
+
+	priv->irq = platform_get_irq(pdev, 0);
+	if (priv->irq < 0)
+		return priv->irq;
+
+	ret = devm_request_threaded_irq(dev, priv->irq, dnn_irq, dnn_irq_thread, 0, "dnn", priv);
+	if (ret) {
+		dev_err(dev, "irq request failed\n");
+		return ret;
+	}
+	disable_irq(priv->irq);
+
+	ret = of_property_read_u32(dev->of_node, "index", &priv->id);
+	if (ret) {
+		dev_err(dev, "failed to acquire irq resource\n");
+		return ret;
+	}
+
+	/*
+	 * allocate uncached-memory to hold address-list for DNN operation
+	 * to hold ptr to 32bit addr memory block
+	 *      for each base address (upto HWD_DNN_BASE_ADDR_NUM)
+	 *      for each iteration (up to HWD_DNN_LIST_NUM_MAX)
+	 * uint32_t list_addr [HWD_DNN_BASE_ADDR_NUM] [HWD_DNN_LIST_NUM_MAX];
+	 */
+	priv->list_vaddr[0] =
+		dma_alloc_wc(dev, sizeof(u32) * HWD_DNN_LIST_NUM_MAX * HWD_DNN_BASE_ADDR_NUM,
+			     &priv->list_paddr[0], GFP_KERNEL);
+	if (!priv->list_vaddr[0]) {
+		dev_err(dev, "dma_alloc_wc failed\n");
+		return -ENOMEM;
+	}
+	for (i = 1; i < HWD_DNN_BASE_ADDR_NUM; i++) {
+		priv->list_vaddr[i] = priv->list_vaddr[0] + HWD_DNN_LIST_NUM_MAX * i;
+		priv->list_paddr[i] = priv->list_paddr[0] + sizeof(u32) * HWD_DNN_LIST_NUM_MAX * i;
+	}
+
+	hwd_dnn_initialize(priv->id, priv->regs);
+
+	snprintf(priv->name, sizeof(priv->name), "dnn%d", priv->id);
+	priv->miscdev.minor = MISC_DYNAMIC_MINOR;
+	priv->miscdev.name = priv->name;
+	priv->miscdev.fops = &dnn_fops;
+	ret = misc_register(&priv->miscdev);
+	if (ret) {
+		dev_err(dev, "misc registration failed\n");
+		hwd_dnn_uninitialize(priv->id);
+		dma_free_wc(dev, sizeof(u32) * HWD_DNN_LIST_NUM_MAX * HWD_DNN_BASE_ADDR_NUM,
+			    priv->list_vaddr[0], priv->list_paddr[0]);
+		return ret;
+	}
+
+	priv->dev = dev;
+	platform_set_drvdata(pdev, priv);
+
+	init_waitqueue_head(&priv->waitq);
+
+	priv->status = DRV_IPA_STATE_IDLE;
+	return 0;
+}
+
+static int dnn_remove(struct platform_device *pdev)
+{
+	struct dnn_priv *priv = platform_get_drvdata(pdev);
+
+	misc_deregister(&priv->miscdev);
+	hwd_dnn_uninitialize(priv->id);
+	dma_free_wc(&pdev->dev, sizeof(u32) * HWD_DNN_LIST_NUM_MAX * HWD_DNN_BASE_ADDR_NUM,
+		    priv->list_vaddr[0], priv->list_paddr[0]);
+	return 0;
+}
+
+static const struct of_device_id dnn_of_match[] = {
+	{
+		.compatible = "toshiba,visconti-dnn",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(platform, dnn_of_match);
+
+static struct platform_driver dnn_driver = {
+	.probe = dnn_probe,
+	.remove = dnn_remove,
+	.driver = {
+		.name = "visconti_dnn",
+		.of_match_table = of_match_ptr(dnn_of_match),
+	},
+};
+module_platform_driver(dnn_driver);
+
+MODULE_AUTHOR("Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>");
+MODULE_DESCRIPTION("Toshiba Visconti DNN driver");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/soc/visconti/dnn/hwd_dnn.c b/drivers/soc/visconti/dnn/hwd_dnn.c
new file mode 100644
index 000000000..832040329
--- /dev/null
+++ b/drivers/soc/visconti/dnn/hwd_dnn.c
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+/* Toshiba Visconti DNN Accelerator Support
+ *
+ * (C) Copyright 2022 TOSHIBA CORPORATION
+ * (C) Copyright 2022 Toshiba Electronic Devices & Storage Corporation
+ */
+
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+
+#include "hwd_dnn.h"
+#include "hwd_dnn_reg.h"
+
+#define HWD_DNN_INT_END		BIT(0)
+#define HWD_DNN_INT_EER		BIT(24)
+#define HWD_DNN_INT_UNUSED	(0x003f0100U)
+#define HWD_DNN_INT_MASK_CONFIG (HWD_DNN_INT_UNUSED | HWD_DNN_INT_EER)
+#define HWD_DNN_INT_CLEAR_ALL	(HWD_DNN_INT_END | HWD_DNN_INT_EER)
+#define HWD_DNN_EXE_CONFIG_MODE (0x3U)
+
+#define HWD_DNN_CGATE_ORD_CONFIG BIT(17)
+
+/**
+ * struct hwd_dnn_resources - HWD driver internal resource structure
+ *
+ * @reg: control register
+ * @status: driver status
+ * @eer_flags_addr: Address of execution error flags
+ */
+struct hwd_dnn_resources {
+	struct hwd_dnn_reg *reg;
+	struct hwd_dnn_status status;
+	u32 *eer_flags_addr;
+};
+
+/* HWD driver internal resource */
+static struct hwd_dnn_resources hwd_dnn_resources[HWD_DNN_DEVICE_MAX] = {};
+
+/**
+ * hwd_dnn_initialize() - Initialize DNN device
+ *
+ * @module_id: @ref hwd_dnn_device "id" of the h/w module
+ * @vaddr: register base virtual address
+ * Return: 0 operation completed successfully
+ */
+void hwd_dnn_initialize(u32 module_id, void *vaddr)
+{
+	struct hwd_dnn_resources *res = &hwd_dnn_resources[module_id];
+
+	/* Initialize the device */
+	res->reg = (struct hwd_dnn_reg *)vaddr;
+}
+
+/**
+ * hwd_dnn_uninitialize() - Uninitialize DNN device
+ *
+ * @module_id: @ref hwd_dnn_device "id" of the h/w module
+ */
+void hwd_dnn_uninitialize(u32 module_id)
+{
+	struct hwd_dnn_resources *res = &hwd_dnn_resources[module_id];
+
+	res->reg = NULL;
+}
+
+/**
+ * hwd_dnn_start() - Start DNN device
+ *
+ * @module_id: @ref hwd_dnn_device "id" of the h/w module
+ * @desc: Pointer to descriptor structure
+ */
+void hwd_dnn_start(u32 module_id, const struct hwd_dnn_descriptor *desc)
+{
+	struct hwd_dnn_resources *res = &hwd_dnn_resources[module_id];
+	struct hwd_dnn_reg *reg;
+	u32 base_addr_flag;
+	int i;
+
+	reg = res->reg;
+
+	/* Configure the registers with user provided values */
+	writel(desc->configuration & GENMASK(31, 0), &reg->cfg_addr);
+	writel(desc->configuration_size, &reg->cfg_size);
+	writel(desc->list_num, &reg->cfg_rpt);
+
+	base_addr_flag = desc->base_addr_flag;
+	for (i = 0; i < HWD_DNN_BASE_ADDR_NUM; i++) {
+		if (base_addr_flag & BIT(i)) {
+			/* 1: address list is specified */
+			writel(0U, &reg->base_addr[i]);
+			writel(desc->base_addr[i] & GENMASK(31, 0), &reg->base_list[i]);
+		} else {
+			/* 0: region address is specified */
+			writel(desc->base_addr[i] & GENMASK(31, 0), &reg->base_addr[i]);
+			writel(0U, &reg->base_list[i]);
+		}
+	}
+
+	writel(base_addr_flag, &reg->base_list_cfg);
+
+	/* clear and unmask interrupts */
+	writel(HWD_DNN_INT_CLEAR_ALL, &reg->intstat);
+	writel(HWD_DNN_INT_MASK_CONFIG, &reg->intmask);
+
+	res->status.eer_cmd = 0;
+	res->status.eer = 0;
+	res->eer_flags_addr = desc->eer_flags_addr;
+
+	/*Invalidate load command in Clock Gating Control Register */
+	writel(HWD_DNN_CGATE_ORD_CONFIG, &reg->cgate_ord);
+
+	/* Sync memory barrier */
+	dsb(st);
+
+	/* Start the device */
+	writel(HWD_DNN_EXE_CONFIG_MODE, &reg->exe);
+}
+
+/**
+ * hwd_dnn_irq_handler() - HWD DNN interrupt handler
+ *
+ * @module_id: id of the h/w module
+ * Return: HWD_DNN_EVENT_EXEC_DONE Bit field saying Configuration processing is completed
+ */
+u32 hwd_dnn_irq_handler(u32 module_id)
+{
+	struct hwd_dnn_resources *res = &hwd_dnn_resources[module_id];
+	struct hwd_dnn_reg *reg;
+	u32 event = 0;
+	u32 int_stat;
+	u32 cause;
+	int i;
+
+	reg = res->reg;
+
+	/* Read the interrupt causes */
+	cause = readl(&reg->mask_intstat);
+
+	/* Read the interrupt status register */
+	int_stat = readl(&reg->intstat);
+
+	/*
+	 * Read the error command.
+	 * Clearing DNN_INTSTAT.EER interrupt cause initializes the error command register.
+	 * Read error command before clearing the interrupt cause.
+	 */
+	res->status.eer_cmd = readl(&reg->int_eer_cmd);
+
+	/* Clear the interrupt causes */
+	writel(cause, &reg->intstat);
+
+	if (cause & HWD_DNN_INT_END) {
+		/* Get EER flags, if requestd */
+		if (res->eer_flags_addr)
+			for (i = 0; i < HWD_DNN_EER_FLAG_NUM; i++)
+				res->eer_flags_addr[i] = readl(&reg->eer_flag[i]);
+
+		event = HWD_DNN_EVENT_EXEC_DONE;
+	}
+
+	if (int_stat & HWD_DNN_INT_EER) {
+		/* Operation error occurred */
+		res->status.eer = 1;
+	}
+
+	return event;
+}
+
+/**
+ * hwd_dnn_get_status() - HWD DNN Get Status
+ *
+ * @module_id: @ref hwd_dnn_device "id" of the h/w module
+ * @status: Pointer to status structure
+ */
+void hwd_dnn_get_status(u32 module_id, struct hwd_dnn_status *status)
+{
+	const struct hwd_dnn_resources *res = &hwd_dnn_resources[module_id];
+
+	/* Update device status */
+	status->eer_cmd = res->status.eer_cmd;
+	status->eer = res->status.eer;
+}
diff --git a/drivers/soc/visconti/dnn/hwd_dnn.h b/drivers/soc/visconti/dnn/hwd_dnn.h
new file mode 100644
index 000000000..84425990c
--- /dev/null
+++ b/drivers/soc/visconti/dnn/hwd_dnn.h
@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */
+/* Toshiba Visconti DNN Accelerator Support
+ *
+ * (C) Copyright 2022 TOSHIBA CORPORATION
+ * (C) Copyright 2022 Toshiba Electronic Devices & Storage Corporation
+ */
+
+#ifndef HWD_DNN_H
+#define HWD_DNN_H
+
+/**
+ * enum hwd_dnn_device_id - device ids for available DNN Accelerators
+ */
+enum hwd_dnn_device_id { HWD_DNN_DEVICE_0 = 0, HWD_DNN_DEVICE_1 = 1, HWD_DNN_DEVICE_MAX = 2 };
+
+/* DNN events returned by irq handler */
+#define HWD_DNN_EVENT_EXEC_DONE (1U)
+
+/* number of base address available for DNN */
+#define HWD_DNN_BASE_ADDR_NUM (8U)
+
+/* number of error flag registers */
+#define HWD_DNN_EER_FLAG_NUM (32U)
+
+/* DNN hardware can execute 1024 iterations for different dataset at a time */
+#define HWD_DNN_LIST_NUM_MAX (1024U)
+
+/**
+ * struct hwd_dnn_status - DNN HWD Driver Status
+ *
+ * @eer_cmd:  Error Command
+ * @eer:      Execution Error
+ * @reserved: Padding
+ */
+struct hwd_dnn_status {
+	u32 eer_cmd;
+	u32 eer : 1;
+	u32 reserved : 31;
+};
+
+/**
+ * struct hwd_dnn_descriptor - HWD DNN Descriptor
+ *
+ * @configuration: Configuration data
+ * @configuration_size: Configuration data size
+ * @list_num: Number of input/output list
+ * @base_addr: Base Address
+ * @eer_flags_addr: Address of storing execution error flags
+ * @base_addr_flag: Bit-fields of Base Address list config. If 1, address list. If 0, fixed address
+ * @config_done: Flags of called configuration
+ */
+struct hwd_dnn_descriptor {
+	u32 configuration;
+	u32 configuration_size;
+	u32 list_num;
+	u32 base_addr[HWD_DNN_BASE_ADDR_NUM];
+	u32 *eer_flags_addr;
+	u32 base_addr_flag;
+	u16 config_done;
+};
+
+void hwd_dnn_initialize(u32 module_id, void *vaddr);
+void hwd_dnn_uninitialize(u32 module_id);
+void hwd_dnn_start(u32 module_id, const struct hwd_dnn_descriptor *desc);
+u32 hwd_dnn_irq_handler(u32 module_id);
+void hwd_dnn_get_status(u32 module_id, struct hwd_dnn_status *status);
+
+#endif /* HWD_DNN_H */
diff --git a/drivers/soc/visconti/dnn/hwd_dnn_reg.h b/drivers/soc/visconti/dnn/hwd_dnn_reg.h
new file mode 100644
index 000000000..c1271e092
--- /dev/null
+++ b/drivers/soc/visconti/dnn/hwd_dnn_reg.h
@@ -0,0 +1,228 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */
+/* Toshiba Visconti DNN Accelerator Support
+ *
+ * (C) Copyright 2022 TOSHIBA CORPORATION
+ * (C) Copyright 2022 Toshiba Electronic Devices & Storage Corporation
+ */
+
+#ifndef HWD_DNN_REG_H
+#define HWD_DNN_REG_H
+
+/**
+ * struct hwd_dnn_reg - DNN register address struct
+ */
+struct hwd_dnn_reg {
+	u32 version;
+	u32 exe;
+	u32 reserved_a_1;
+	u32 intstat;
+	u32 intmask;
+	u32 mask_intstat;
+	u32 reserved_a_2;
+	u32 int_eer_cmd;
+	u32 reserved_b_1[8];
+	u32 cfg_cid;
+	u32 cfg_cnm;
+	u32 reserved_b_2[10];
+	u32 reserved_a_3;
+	u32 cgate_ord;
+	u32 reserved_b_3[2];
+	u32 eer_flag[32];
+	u32 cfg_addr;
+	u32 cfg_size;
+	u32 cfg_rpt;
+	u32 reserved_b_4[1];
+	u32 base_list_cfg;
+	u32 reserved_b_5[11];
+	u32 base_addr[8];
+	u32 reserved_b_6[24];
+	u32 base_list[8];
+	u32 reserved_b_7[8];
+	u32 cmd_load;
+	u32 ld_format;
+	u32 reserved_b_8[14];
+	u32 ld_g_size0;
+	u32 ld_g_size1;
+	u32 reserved_b_9[2];
+	u32 reserved_a_4;
+	u32 reserved_b_10[1];
+	u32 ld_g_base_id;
+	u32 ld_g_offset;
+	u32 ld_g_lptch;
+	u32 ld_g_cptch;
+	u32 ld_g_vptch;
+	u32 reserved_b_11[5];
+	u32 ld_l_size0;
+	u32 ld_l_size1;
+	u32 reserved_b_12[2];
+	u32 ld_l_addr;
+	u32 reserved_b_13[3];
+	u32 ld_l_lptch;
+	u32 ld_l_cptch;
+	u32 ld_l_vptch;
+	u32 reserved_b_14[17];
+	u32 reserved_a_5;
+	u32 reserved_b_15[3];
+	u32 cmd_store;
+	u32 st_format;
+	u32 reserved_b_16[14];
+	u32 st_g_size0;
+	u32 st_g_size1;
+	u32 reserved_b_17[2];
+	u32 reserved_a_6;
+	u32 reserved_b_18[1];
+	u32 st_g_base_id;
+	u32 st_g_offset;
+	u32 st_g_lptch;
+	u32 st_g_cptch;
+	u32 st_g_vptch;
+	u32 reserved_b_19[5];
+	u32 st_l_size0;
+	u32 st_l_size1;
+	u32 reserved_b_20[2];
+	u32 st_l_addr;
+	u32 reserved_b_21[3];
+	u32 st_l_lptch;
+	u32 st_l_cptch;
+	u32 st_l_vptch;
+	u32 reserved_b_22[17];
+	u32 reserved_a_7;
+	u32 reserved_b_23[3];
+	u32 cmd_copy;
+	u32 reserved_b_24[15];
+	u32 cp_src_size0;
+	u32 cp_src_size1;
+	u32 reserved_b_25[2];
+	u32 cp_src_addr;
+	u32 reserved_b_26[3];
+	u32 cp_src_lptch;
+	u32 cp_src_cptch;
+	u32 reserved_a_8;
+	u32 reserved_b_27[5];
+	u32 cp_dst_size0;
+	u32 cp_dst_size1;
+	u32 reserved_b_28[2];
+	u32 cp_dst_addr;
+	u32 reserved_b_29[3];
+	u32 cp_dst_lptch;
+	u32 cp_dst_cptch;
+	u32 reserved_a_9;
+	u32 reserved_b_30[17];
+	u32 reserved_a_10;
+	u32 reserved_b_31[3];
+	u32 cmd_fill;
+	u32 reserved_b_32[1];
+	u32 fl_cfg;
+	u32 reserved_b_33[13];
+	u32 fl_src_size0;
+	u32 fl_src_size1;
+	u32 reserved_b_34[2];
+	u32 fl_src_addr;
+	u32 reserved_b_35[3];
+	u32 fl_src_lptch;
+	u32 fl_src_cptch;
+	u32 reserved_b_36[6];
+	u32 fl_dst_size0;
+	u32 fl_dst_size1;
+	u32 reserved_b_37[2];
+	u32 fl_dst_addr;
+	u32 reserved_b_38[3];
+	u32 fl_dst_lptch;
+	u32 fl_dst_cptch;
+	u32 reserved_b_39[22];
+	u32 cmd_sync;
+	u32 reserved_b_40[1];
+	u32 cmd_srst;
+	u32 reserved_b_41[1];
+	u32 cmd_halt;
+	u32 reserved_b_42[3];
+	u32 cmd_finish;
+	u32 reserved_b_43[119];
+	u32 cmd_exe;
+	u32 exe_mode;
+	u32 reserved_b_44[14];
+	u32 exe_inf_size0;
+	u32 exe_inf_size1;
+	u32 reserved_b_45[2];
+	u32 exe_inf_addr;
+	u32 reserved_b_46[3];
+	u32 exe_inf_lptch;
+	u32 exe_inf_cptch;
+	u32 reserved_b_47[26];
+	u32 exe_conv_bias_addr;
+	u32 reserved_b_48[27];
+	u32 exe_conv_wt_size0;
+	u32 exe_conv_wt_size1;
+	u32 reserved_b_49[2];
+	u32 exe_conv_wt_addr;
+	u32 reserved_b_50[3];
+	u32 exe_conv_wt_lptch;
+	u32 exe_conv_wt_cptch;
+	u32 exe_conv_wt_vptch;
+	u32 reserved_b_51[9];
+	u32 exe_conv_acv_addr;
+	u32 reserved_b_52[3];
+	u32 exe_conv_acv_lptch;
+	u32 exe_conv_acv_cptch;
+	u32 reserved_b_53[18];
+	u32 exe_conv_out;
+	u32 reserved_b_54[11];
+	u32 actv_tbl_range;
+	u32 reserved_a_11;
+	u32 actv_tbl_prm;
+	u32 reserved_b_55[5];
+	u32 exe_pool_size;
+	u32 reserved_b_56[43];
+	u32 exe_pool_out;
+	u32 exe_pool_pe_crop;
+	u32 reserved_b_57[10];
+	u32 exe_norm_g_prm;
+	u32 reserved_b_58[15];
+	u32 exe_sav_max_prm;
+	u32 reserved_b_59[35];
+	u32 exe_norm_out;
+	u32 reserved_b_60[23];
+	u32 exe_outf_addr;
+	u32 reserved_b_61[3];
+	u32 exe_outf_lptch;
+	u32 exe_outf_cptch;
+	u32 reserved_b_62[102];
+	u32 reserved_a_12;
+	u32 reserved_b_63[8];
+	u32 reserved_a_13;
+	u32 reserved_a_14;
+	u32 reserved_a_15;
+	u32 reserved_b_64[4];
+	u32 reserved_a_16;
+	u32 reserved_a_17;
+	u32 reserved_b_65[46];
+	u32 exe_pool_pa3_0;
+	u32 exe_pool_pa3_2;
+	u32 exe_pool_pa3_4;
+	u32 exe_pool_pa3_6;
+	u32 exe_pool_pa3_8;
+	u32 exe_pool_pa3_10;
+	u32 exe_pool_pa3_12;
+	u32 exe_pool_pa3_14;
+	u32 exe_pool_pa3_16;
+	u32 exe_pool_pa3_18;
+	u32 exe_pool_pa3_20;
+	u32 exe_pool_pa3_22;
+	u32 exe_pool_pa3_24;
+	u32 reserved_b_66[3];
+	u32 exe_pool_pa2_0;
+	u32 exe_pool_pa2_2;
+	u32 exe_pool_pa2_4;
+	u32 exe_pool_pa2_6;
+	u32 exe_pool_pa2_8;
+	u32 exe_pool_pa2_10;
+	u32 exe_pool_pa2_12;
+	u32 exe_pool_pa2_14;
+	u32 exe_pool_pa2_16;
+	u32 exe_pool_pa2_18;
+	u32 exe_pool_pa2_20;
+	u32 exe_pool_pa2_22;
+	u32 exe_pool_pa2_24;
+};
+
+#endif /* HWD_DNN_REG_H */
diff --git a/drivers/soc/visconti/uapi/dnn.h b/drivers/soc/visconti/uapi/dnn.h
new file mode 100644
index 000000000..972c39655
--- /dev/null
+++ b/drivers/soc/visconti/uapi/dnn.h
@@ -0,0 +1,77 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/* Toshiba Visconti DNN Accelerator Support
+ *
+ * (C) Copyright 2022 TOSHIBA CORPORATION
+ * (C) Copyright 2022 Toshiba Electronic Devices & Storage Corporation
+ */
+
+#ifndef _UAPI_LINUX_DNN_H
+#define _UAPI_LINUX_DNN_H
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+#include "ipa.h"
+
+#define DRV_DNN_BIT_CONFIG_DESC_FINAL (0x8000U)
+#define DRV_DNN_BUFFER_INDEX_MAX      (15)
+
+#define DRV_DNN_BASE_ADDR_NUM (8U) /* DNN number of base address */
+
+#define DRV_DNN_BASE_ADDR_PURPOSE_INPUT	    (1U)
+#define DRV_DNN_BASE_ADDR_PURPOSE_OUTPUT    (2U)
+#define DRV_DNN_BASE_ADDR_PURPOSE_AWB	    (3U)
+#define DRV_DNN_BASE_ADDR_PURPOSE_TEMPORARY (4U)
+
+/**
+ * struct drv_dnn_status - DNN IPA status for IOC_IPA_GET_STATUS
+ *
+ * @state:     State of driver
+ * @eer_cmd:   Execution error command
+ * @eer:       Execution error
+ * @reserved:  Padding
+ * @eer_flags: Execution error flags
+ */
+struct drv_dnn_status {
+	enum drv_ipa_state state;
+	u32 eer_cmd;
+	u32 eer : 1;
+	u32 reserved : 31;
+	u32 eer_flags[32];
+};
+
+struct drv_dnn_base_addr {
+	u32 purpose;
+	union {
+		struct drv_ipa_addr ipa_addr;
+		uintptr_t list_addr;
+	} addr;
+};
+
+/**
+ * struct drv_dnn_descriptor - DNN IPA Descriptor for IOC_IPA_START
+ *
+ * @configuration:        Address of configuration data
+ * @configuration_offset: Configuration offset
+ * @configuration_size:   Configuration data size
+ * @list_num:             Number of input/output list
+ * @base_addr:            Base addresses
+ * @base_addr_flag:       Bit-fields of base_addr list config
+ * - if 0, fixed address
+ * - if 1, address list
+ * @config_done:          Flags of called configuration
+ * @buffer_info:          Table of buffer information
+ * @buffer_info_num:      Number of buffer_info
+ */
+struct drv_dnn_descriptor {
+	struct drv_ipa_addr configuration;
+	u32 configuration_offset;
+	u32 configuration_size;
+	u32 list_num;
+	struct drv_dnn_base_addr base_addr[DRV_DNN_BASE_ADDR_NUM];
+	u32 base_addr_flag;
+	u16 config_done;
+	struct drv_ipa_buffer_info buffer_info[DRV_DNN_BUFFER_INDEX_MAX];
+	s32 buffer_info_num;
+};
+
+#endif /* _UAPI_LINUX_DNN_H */
-- 
2.17.1



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [PATCH 4/4] MAINTAINERS: Add entries for Toshiba Visconti DNN image processing accelerator
  2022-04-28 13:11 ` Yuji Ishikawa
  (?)
@ 2022-04-28 13:11   ` Yuji Ishikawa
  -1 siblings, 0 replies; 36+ messages in thread
From: Yuji Ishikawa @ 2022-04-28 13:11 UTC (permalink / raw)
  To: Rob Herring, Nobuhiro Iwamatsu, Sumit Semwal, Christian König
  Cc: linux-arm-kernel, linux-kernel, linux-media, dri-devel,
	linaro-mm-sig, yuji2.ishikawa

---
 MAINTAINERS | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index dd36acc87..a2e2bd719 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2796,12 +2796,14 @@ F:	Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml
 F:	Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml
 F:	Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
 F:	Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml
+F:	Documentation/devicetree/bindings/soc/visconti/
 F:	Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml
 F:	arch/arm64/boot/dts/toshiba/
 F:	drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c
 F:	drivers/gpio/gpio-visconti.c
 F:	drivers/pci/controller/dwc/pcie-visconti.c
 F:	drivers/pinctrl/visconti/
+F:	drivers/soc/visconti/
 F:	drivers/watchdog/visconti_wdt.c
 N:	visconti
 
-- 
2.17.1



^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [PATCH 4/4] MAINTAINERS: Add entries for Toshiba Visconti DNN image processing accelerator
@ 2022-04-28 13:11   ` Yuji Ishikawa
  0 siblings, 0 replies; 36+ messages in thread
From: Yuji Ishikawa @ 2022-04-28 13:11 UTC (permalink / raw)
  To: Rob Herring, Nobuhiro Iwamatsu, Sumit Semwal, Christian König
  Cc: linux-arm-kernel, linux-kernel, linux-media, dri-devel,
	linaro-mm-sig, yuji2.ishikawa

---
 MAINTAINERS | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index dd36acc87..a2e2bd719 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2796,12 +2796,14 @@ F:	Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml
 F:	Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml
 F:	Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
 F:	Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml
+F:	Documentation/devicetree/bindings/soc/visconti/
 F:	Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml
 F:	arch/arm64/boot/dts/toshiba/
 F:	drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c
 F:	drivers/gpio/gpio-visconti.c
 F:	drivers/pci/controller/dwc/pcie-visconti.c
 F:	drivers/pinctrl/visconti/
+F:	drivers/soc/visconti/
 F:	drivers/watchdog/visconti_wdt.c
 N:	visconti
 
-- 
2.17.1



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 36+ messages in thread

* [PATCH 4/4] MAINTAINERS: Add entries for Toshiba Visconti DNN image processing accelerator
@ 2022-04-28 13:11   ` Yuji Ishikawa
  0 siblings, 0 replies; 36+ messages in thread
From: Yuji Ishikawa @ 2022-04-28 13:11 UTC (permalink / raw)
  To: Rob Herring, Nobuhiro Iwamatsu, Sumit Semwal, Christian König
  Cc: linux-kernel, dri-devel, linaro-mm-sig, yuji2.ishikawa,
	linux-arm-kernel, linux-media

---
 MAINTAINERS | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index dd36acc87..a2e2bd719 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2796,12 +2796,14 @@ F:	Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml
 F:	Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml
 F:	Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
 F:	Documentation/devicetree/bindings/pinctrl/toshiba,visconti-pinctrl.yaml
+F:	Documentation/devicetree/bindings/soc/visconti/
 F:	Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml
 F:	arch/arm64/boot/dts/toshiba/
 F:	drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c
 F:	drivers/gpio/gpio-visconti.c
 F:	drivers/pci/controller/dwc/pcie-visconti.c
 F:	drivers/pinctrl/visconti/
+F:	drivers/soc/visconti/
 F:	drivers/watchdog/visconti_wdt.c
 N:	visconti
 
-- 
2.17.1



^ permalink raw reply related	[flat|nested] 36+ messages in thread

* Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing accelerator driver
  2022-04-28 13:11 ` Yuji Ishikawa
  (?)
@ 2022-05-12 11:14   ` Hans Verkuil
  -1 siblings, 0 replies; 36+ messages in thread
From: Hans Verkuil @ 2022-05-12 11:14 UTC (permalink / raw)
  To: Yuji Ishikawa, Rob Herring, Nobuhiro Iwamatsu, Sumit Semwal,
	Christian König
  Cc: linux-arm-kernel, linux-kernel, linux-media, dri-devel, linaro-mm-sig

Hi Yuji,

On 4/28/22 15:11, Yuji Ishikawa wrote:
> This series is the DNN image processing accelerator driver for Toshiba's ARM SoC, Visconti[0].
> This provides DT binding documentation, device driver, MAINTAINER files.
> 
> The second patch "soc: visconti: Add Toshiba Visconti image processing accelerator common source"
> and the fourth patch "MAINTAINERS: ..." are the same as the ones in the preceding post for affine driver.

There appears to be no documentation whatsoever, unless I am missing something.

How is the uAPI supposed to be used? What does it do? What formats does it accept
or produce?

If this processes images, then (as Laurent mentioned) this is more suitable as a
V4L2 mem2mem driver.

See https://linuxtv.org/downloads/v4l-dvb-apis-new/userspace-api/v4l/dev-mem2mem.html
and the many drivers in drivers/media that use it (git grep v4l2-mem2mem.h).

But without any explanation whatsoever I have no idea what does or does not make sense.

Regards,

	Hans

> 
> Best regards,
> Yuji
> 
> [0]: https://toshiba.semicon-storage.com/ap-en/semiconductor/product/image-recognition-processors-visconti.html
> 
> Yuji Ishikawa (4):
>   dt-bindings: soc: visconti: Add Toshiba Visconti DNN image processing
>     accelerator bindings
>   soc: visconti: Add Toshiba Visconti image processing accelerator
>     common source
>   soc: visconti: Add Toshiba Visconti DNN image processing accelerator
>   MAINTAINERS: Add entries for Toshiba Visconti DNN image processing
>     accelerator
> 
>  .../soc/visconti/toshiba,visconti-dnn.yaml    |  54 ++
>  MAINTAINERS                                   |   2 +
>  drivers/soc/Kconfig                           |   1 +
>  drivers/soc/Makefile                          |   1 +
>  drivers/soc/visconti/Kconfig                  |   7 +
>  drivers/soc/visconti/Makefile                 |   8 +
>  drivers/soc/visconti/dnn/Makefile             |   6 +
>  drivers/soc/visconti/dnn/dnn.c                | 533 ++++++++++++++++++
>  drivers/soc/visconti/dnn/hwd_dnn.c            | 183 ++++++
>  drivers/soc/visconti/dnn/hwd_dnn.h            |  68 +++
>  drivers/soc/visconti/dnn/hwd_dnn_reg.h        | 228 ++++++++
>  drivers/soc/visconti/ipa_common.c             |  55 ++
>  drivers/soc/visconti/ipa_common.h             |  18 +
>  drivers/soc/visconti/uapi/dnn.h               |  77 +++
>  drivers/soc/visconti/uapi/ipa.h               |  88 +++
>  15 files changed, 1329 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.yaml
>  create mode 100644 drivers/soc/visconti/Kconfig
>  create mode 100644 drivers/soc/visconti/Makefile
>  create mode 100644 drivers/soc/visconti/dnn/Makefile
>  create mode 100644 drivers/soc/visconti/dnn/dnn.c
>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.c
>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.h
>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn_reg.h
>  create mode 100644 drivers/soc/visconti/ipa_common.c
>  create mode 100644 drivers/soc/visconti/ipa_common.h
>  create mode 100644 drivers/soc/visconti/uapi/dnn.h
>  create mode 100644 drivers/soc/visconti/uapi/ipa.h
> 


^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing accelerator driver
@ 2022-05-12 11:14   ` Hans Verkuil
  0 siblings, 0 replies; 36+ messages in thread
From: Hans Verkuil @ 2022-05-12 11:14 UTC (permalink / raw)
  To: Yuji Ishikawa, Rob Herring, Nobuhiro Iwamatsu, Sumit Semwal,
	Christian König
  Cc: linaro-mm-sig, dri-devel, linux-kernel, linux-arm-kernel, linux-media

Hi Yuji,

On 4/28/22 15:11, Yuji Ishikawa wrote:
> This series is the DNN image processing accelerator driver for Toshiba's ARM SoC, Visconti[0].
> This provides DT binding documentation, device driver, MAINTAINER files.
> 
> The second patch "soc: visconti: Add Toshiba Visconti image processing accelerator common source"
> and the fourth patch "MAINTAINERS: ..." are the same as the ones in the preceding post for affine driver.

There appears to be no documentation whatsoever, unless I am missing something.

How is the uAPI supposed to be used? What does it do? What formats does it accept
or produce?

If this processes images, then (as Laurent mentioned) this is more suitable as a
V4L2 mem2mem driver.

See https://linuxtv.org/downloads/v4l-dvb-apis-new/userspace-api/v4l/dev-mem2mem.html
and the many drivers in drivers/media that use it (git grep v4l2-mem2mem.h).

But without any explanation whatsoever I have no idea what does or does not make sense.

Regards,

	Hans

> 
> Best regards,
> Yuji
> 
> [0]: https://toshiba.semicon-storage.com/ap-en/semiconductor/product/image-recognition-processors-visconti.html
> 
> Yuji Ishikawa (4):
>   dt-bindings: soc: visconti: Add Toshiba Visconti DNN image processing
>     accelerator bindings
>   soc: visconti: Add Toshiba Visconti image processing accelerator
>     common source
>   soc: visconti: Add Toshiba Visconti DNN image processing accelerator
>   MAINTAINERS: Add entries for Toshiba Visconti DNN image processing
>     accelerator
> 
>  .../soc/visconti/toshiba,visconti-dnn.yaml    |  54 ++
>  MAINTAINERS                                   |   2 +
>  drivers/soc/Kconfig                           |   1 +
>  drivers/soc/Makefile                          |   1 +
>  drivers/soc/visconti/Kconfig                  |   7 +
>  drivers/soc/visconti/Makefile                 |   8 +
>  drivers/soc/visconti/dnn/Makefile             |   6 +
>  drivers/soc/visconti/dnn/dnn.c                | 533 ++++++++++++++++++
>  drivers/soc/visconti/dnn/hwd_dnn.c            | 183 ++++++
>  drivers/soc/visconti/dnn/hwd_dnn.h            |  68 +++
>  drivers/soc/visconti/dnn/hwd_dnn_reg.h        | 228 ++++++++
>  drivers/soc/visconti/ipa_common.c             |  55 ++
>  drivers/soc/visconti/ipa_common.h             |  18 +
>  drivers/soc/visconti/uapi/dnn.h               |  77 +++
>  drivers/soc/visconti/uapi/ipa.h               |  88 +++
>  15 files changed, 1329 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.yaml
>  create mode 100644 drivers/soc/visconti/Kconfig
>  create mode 100644 drivers/soc/visconti/Makefile
>  create mode 100644 drivers/soc/visconti/dnn/Makefile
>  create mode 100644 drivers/soc/visconti/dnn/dnn.c
>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.c
>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.h
>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn_reg.h
>  create mode 100644 drivers/soc/visconti/ipa_common.c
>  create mode 100644 drivers/soc/visconti/ipa_common.h
>  create mode 100644 drivers/soc/visconti/uapi/dnn.h
>  create mode 100644 drivers/soc/visconti/uapi/ipa.h
> 


^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing accelerator driver
@ 2022-05-12 11:14   ` Hans Verkuil
  0 siblings, 0 replies; 36+ messages in thread
From: Hans Verkuil @ 2022-05-12 11:14 UTC (permalink / raw)
  To: Yuji Ishikawa, Rob Herring, Nobuhiro Iwamatsu, Sumit Semwal,
	Christian König
  Cc: linux-arm-kernel, linux-kernel, linux-media, dri-devel, linaro-mm-sig

Hi Yuji,

On 4/28/22 15:11, Yuji Ishikawa wrote:
> This series is the DNN image processing accelerator driver for Toshiba's ARM SoC, Visconti[0].
> This provides DT binding documentation, device driver, MAINTAINER files.
> 
> The second patch "soc: visconti: Add Toshiba Visconti image processing accelerator common source"
> and the fourth patch "MAINTAINERS: ..." are the same as the ones in the preceding post for affine driver.

There appears to be no documentation whatsoever, unless I am missing something.

How is the uAPI supposed to be used? What does it do? What formats does it accept
or produce?

If this processes images, then (as Laurent mentioned) this is more suitable as a
V4L2 mem2mem driver.

See https://linuxtv.org/downloads/v4l-dvb-apis-new/userspace-api/v4l/dev-mem2mem.html
and the many drivers in drivers/media that use it (git grep v4l2-mem2mem.h).

But without any explanation whatsoever I have no idea what does or does not make sense.

Regards,

	Hans

> 
> Best regards,
> Yuji
> 
> [0]: https://toshiba.semicon-storage.com/ap-en/semiconductor/product/image-recognition-processors-visconti.html
> 
> Yuji Ishikawa (4):
>   dt-bindings: soc: visconti: Add Toshiba Visconti DNN image processing
>     accelerator bindings
>   soc: visconti: Add Toshiba Visconti image processing accelerator
>     common source
>   soc: visconti: Add Toshiba Visconti DNN image processing accelerator
>   MAINTAINERS: Add entries for Toshiba Visconti DNN image processing
>     accelerator
> 
>  .../soc/visconti/toshiba,visconti-dnn.yaml    |  54 ++
>  MAINTAINERS                                   |   2 +
>  drivers/soc/Kconfig                           |   1 +
>  drivers/soc/Makefile                          |   1 +
>  drivers/soc/visconti/Kconfig                  |   7 +
>  drivers/soc/visconti/Makefile                 |   8 +
>  drivers/soc/visconti/dnn/Makefile             |   6 +
>  drivers/soc/visconti/dnn/dnn.c                | 533 ++++++++++++++++++
>  drivers/soc/visconti/dnn/hwd_dnn.c            | 183 ++++++
>  drivers/soc/visconti/dnn/hwd_dnn.h            |  68 +++
>  drivers/soc/visconti/dnn/hwd_dnn_reg.h        | 228 ++++++++
>  drivers/soc/visconti/ipa_common.c             |  55 ++
>  drivers/soc/visconti/ipa_common.h             |  18 +
>  drivers/soc/visconti/uapi/dnn.h               |  77 +++
>  drivers/soc/visconti/uapi/ipa.h               |  88 +++
>  15 files changed, 1329 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.yaml
>  create mode 100644 drivers/soc/visconti/Kconfig
>  create mode 100644 drivers/soc/visconti/Makefile
>  create mode 100644 drivers/soc/visconti/dnn/Makefile
>  create mode 100644 drivers/soc/visconti/dnn/dnn.c
>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.c
>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.h
>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn_reg.h
>  create mode 100644 drivers/soc/visconti/ipa_common.c
>  create mode 100644 drivers/soc/visconti/ipa_common.h
>  create mode 100644 drivers/soc/visconti/uapi/dnn.h
>  create mode 100644 drivers/soc/visconti/uapi/ipa.h
> 


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 36+ messages in thread

* RE: [PATCH 0/4] Add Toshiba Visconti DNN image processing accelerator driver
  2022-05-12 11:14   ` Hans Verkuil
  (?)
@ 2022-05-20  9:48     ` yuji2.ishikawa
  -1 siblings, 0 replies; 36+ messages in thread
From: yuji2.ishikawa @ 2022-05-20  9:48 UTC (permalink / raw)
  To: hverkuil, robh+dt, nobuhiro1.iwamatsu, sumit.semwal, christian.koenig
  Cc: linux-arm-kernel, linux-kernel, linux-media, dri-devel, linaro-mm-sig

Hi Hans,

Thank you for your comment.
I agree that this submission lacks documents sharing basic idea of the accelerators; what do they accept and what do they yield.
Where can I put a new document? Can I put it as a comment in a source? Can I add a file under Documentation/misc-devices directory?

Thanks,
Yuji Ishikawa

> -----Original Message-----
> From: Hans Verkuil <hverkuil@xs4all.nl>
> Sent: Thursday, May 12, 2022 8:15 PM
> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> <yuji2.ishikawa@toshiba.co.jp>; Rob Herring <robh+dt@kernel.org>;
> iwamatsu nobuhiro(岩松 信洋 □ＳＷＣ◯ＡＣＴ)
> <nobuhiro1.iwamatsu@toshiba.co.jp>; Sumit Semwal
> <sumit.semwal@linaro.org>; Christian König <christian.koenig@amd.com>
> Cc: linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
> linux-media@vger.kernel.org; dri-devel@lists.freedesktop.org;
> linaro-mm-sig@lists.linaro.org
> Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing
> accelerator driver
> 
> Hi Yuji,
> 
> On 4/28/22 15:11, Yuji Ishikawa wrote:
> > This series is the DNN image processing accelerator driver for Toshiba's ARM
> SoC, Visconti[0].
> > This provides DT binding documentation, device driver, MAINTAINER files.
> >
> > The second patch "soc: visconti: Add Toshiba Visconti image processing
> accelerator common source"
> > and the fourth patch "MAINTAINERS: ..." are the same as the ones in the
> preceding post for affine driver.
> 
> There appears to be no documentation whatsoever, unless I am missing
> something.
> 
> How is the uAPI supposed to be used? What does it do? What formats does it
> accept or produce?
> 
> If this processes images, then (as Laurent mentioned) this is more suitable as a
> V4L2 mem2mem driver.
> 
> See
> https://linuxtv.org/downloads/v4l-dvb-apis-new/userspace-api/v4l/dev-me
> m2mem.html
> and the many drivers in drivers/media that use it (git grep v4l2-mem2mem.h).
> 
> But without any explanation whatsoever I have no idea what does or does not
> make sense.
> 
> Regards,
> 
> 	Hans
> 
> >
> > Best regards,
> > Yuji
> >
> > [0]:
> >
> https://toshiba.semicon-storage.com/ap-en/semiconductor/product/image-
> > recognition-processors-visconti.html
> >
> > Yuji Ishikawa (4):
> >   dt-bindings: soc: visconti: Add Toshiba Visconti DNN image processing
> >     accelerator bindings
> >   soc: visconti: Add Toshiba Visconti image processing accelerator
> >     common source
> >   soc: visconti: Add Toshiba Visconti DNN image processing accelerator
> >   MAINTAINERS: Add entries for Toshiba Visconti DNN image processing
> >     accelerator
> >
> >  .../soc/visconti/toshiba,visconti-dnn.yaml    |  54 ++
> >  MAINTAINERS                                   |   2 +
> >  drivers/soc/Kconfig                           |   1 +
> >  drivers/soc/Makefile                          |   1 +
> >  drivers/soc/visconti/Kconfig                  |   7 +
> >  drivers/soc/visconti/Makefile                 |   8 +
> >  drivers/soc/visconti/dnn/Makefile             |   6 +
> >  drivers/soc/visconti/dnn/dnn.c                | 533
> ++++++++++++++++++
> >  drivers/soc/visconti/dnn/hwd_dnn.c            | 183 ++++++
> >  drivers/soc/visconti/dnn/hwd_dnn.h            |  68 +++
> >  drivers/soc/visconti/dnn/hwd_dnn_reg.h        | 228 ++++++++
> >  drivers/soc/visconti/ipa_common.c             |  55 ++
> >  drivers/soc/visconti/ipa_common.h             |  18 +
> >  drivers/soc/visconti/uapi/dnn.h               |  77 +++
> >  drivers/soc/visconti/uapi/ipa.h               |  88 +++
> >  15 files changed, 1329 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.ya
> > ml  create mode 100644 drivers/soc/visconti/Kconfig  create mode
> > 100644 drivers/soc/visconti/Makefile  create mode 100644
> > drivers/soc/visconti/dnn/Makefile  create mode 100644
> > drivers/soc/visconti/dnn/dnn.c  create mode 100644
> > drivers/soc/visconti/dnn/hwd_dnn.c
> >  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.h
> >  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn_reg.h
> >  create mode 100644 drivers/soc/visconti/ipa_common.c  create mode
> > 100644 drivers/soc/visconti/ipa_common.h  create mode 100644
> > drivers/soc/visconti/uapi/dnn.h  create mode 100644
> > drivers/soc/visconti/uapi/ipa.h
> >

^ permalink raw reply	[flat|nested] 36+ messages in thread

* RE: [PATCH 0/4] Add Toshiba Visconti DNN image processing accelerator driver
@ 2022-05-20  9:48     ` yuji2.ishikawa
  0 siblings, 0 replies; 36+ messages in thread
From: yuji2.ishikawa @ 2022-05-20  9:48 UTC (permalink / raw)
  To: hverkuil, robh+dt, nobuhiro1.iwamatsu, sumit.semwal, christian.koenig
  Cc: linaro-mm-sig, dri-devel, linux-kernel, linux-arm-kernel, linux-media

Hi Hans,

Thank you for your comment.
I agree that this submission lacks documents sharing basic idea of the accelerators; what do they accept and what do they yield.
Where can I put a new document? Can I put it as a comment in a source? Can I add a file under Documentation/misc-devices directory?

Thanks,
Yuji Ishikawa

> -----Original Message-----
> From: Hans Verkuil <hverkuil@xs4all.nl>
> Sent: Thursday, May 12, 2022 8:15 PM
> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> <yuji2.ishikawa@toshiba.co.jp>; Rob Herring <robh+dt@kernel.org>;
> iwamatsu nobuhiro(岩松 信洋 □ＳＷＣ◯ＡＣＴ)
> <nobuhiro1.iwamatsu@toshiba.co.jp>; Sumit Semwal
> <sumit.semwal@linaro.org>; Christian König <christian.koenig@amd.com>
> Cc: linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
> linux-media@vger.kernel.org; dri-devel@lists.freedesktop.org;
> linaro-mm-sig@lists.linaro.org
> Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing
> accelerator driver
> 
> Hi Yuji,
> 
> On 4/28/22 15:11, Yuji Ishikawa wrote:
> > This series is the DNN image processing accelerator driver for Toshiba's ARM
> SoC, Visconti[0].
> > This provides DT binding documentation, device driver, MAINTAINER files.
> >
> > The second patch "soc: visconti: Add Toshiba Visconti image processing
> accelerator common source"
> > and the fourth patch "MAINTAINERS: ..." are the same as the ones in the
> preceding post for affine driver.
> 
> There appears to be no documentation whatsoever, unless I am missing
> something.
> 
> How is the uAPI supposed to be used? What does it do? What formats does it
> accept or produce?
> 
> If this processes images, then (as Laurent mentioned) this is more suitable as a
> V4L2 mem2mem driver.
> 
> See
> https://linuxtv.org/downloads/v4l-dvb-apis-new/userspace-api/v4l/dev-me
> m2mem.html
> and the many drivers in drivers/media that use it (git grep v4l2-mem2mem.h).
> 
> But without any explanation whatsoever I have no idea what does or does not
> make sense.
> 
> Regards,
> 
> 	Hans
> 
> >
> > Best regards,
> > Yuji
> >
> > [0]:
> >
> https://toshiba.semicon-storage.com/ap-en/semiconductor/product/image-
> > recognition-processors-visconti.html
> >
> > Yuji Ishikawa (4):
> >   dt-bindings: soc: visconti: Add Toshiba Visconti DNN image processing
> >     accelerator bindings
> >   soc: visconti: Add Toshiba Visconti image processing accelerator
> >     common source
> >   soc: visconti: Add Toshiba Visconti DNN image processing accelerator
> >   MAINTAINERS: Add entries for Toshiba Visconti DNN image processing
> >     accelerator
> >
> >  .../soc/visconti/toshiba,visconti-dnn.yaml    |  54 ++
> >  MAINTAINERS                                   |   2 +
> >  drivers/soc/Kconfig                           |   1 +
> >  drivers/soc/Makefile                          |   1 +
> >  drivers/soc/visconti/Kconfig                  |   7 +
> >  drivers/soc/visconti/Makefile                 |   8 +
> >  drivers/soc/visconti/dnn/Makefile             |   6 +
> >  drivers/soc/visconti/dnn/dnn.c                | 533
> ++++++++++++++++++
> >  drivers/soc/visconti/dnn/hwd_dnn.c            | 183 ++++++
> >  drivers/soc/visconti/dnn/hwd_dnn.h            |  68 +++
> >  drivers/soc/visconti/dnn/hwd_dnn_reg.h        | 228 ++++++++
> >  drivers/soc/visconti/ipa_common.c             |  55 ++
> >  drivers/soc/visconti/ipa_common.h             |  18 +
> >  drivers/soc/visconti/uapi/dnn.h               |  77 +++
> >  drivers/soc/visconti/uapi/ipa.h               |  88 +++
> >  15 files changed, 1329 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.ya
> > ml  create mode 100644 drivers/soc/visconti/Kconfig  create mode
> > 100644 drivers/soc/visconti/Makefile  create mode 100644
> > drivers/soc/visconti/dnn/Makefile  create mode 100644
> > drivers/soc/visconti/dnn/dnn.c  create mode 100644
> > drivers/soc/visconti/dnn/hwd_dnn.c
> >  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.h
> >  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn_reg.h
> >  create mode 100644 drivers/soc/visconti/ipa_common.c  create mode
> > 100644 drivers/soc/visconti/ipa_common.h  create mode 100644
> > drivers/soc/visconti/uapi/dnn.h  create mode 100644
> > drivers/soc/visconti/uapi/ipa.h
> >

^ permalink raw reply	[flat|nested] 36+ messages in thread

* RE: [PATCH 0/4] Add Toshiba Visconti DNN image processing accelerator driver
@ 2022-05-20  9:48     ` yuji2.ishikawa
  0 siblings, 0 replies; 36+ messages in thread
From: yuji2.ishikawa @ 2022-05-20  9:48 UTC (permalink / raw)
  To: hverkuil, robh+dt, nobuhiro1.iwamatsu, sumit.semwal, christian.koenig
  Cc: linux-arm-kernel, linux-kernel, linux-media, dri-devel, linaro-mm-sig

Hi Hans,

Thank you for your comment.
I agree that this submission lacks documents sharing basic idea of the accelerators; what do they accept and what do they yield.
Where can I put a new document? Can I put it as a comment in a source? Can I add a file under Documentation/misc-devices directory?

Thanks,
Yuji Ishikawa

> -----Original Message-----
> From: Hans Verkuil <hverkuil@xs4all.nl>
> Sent: Thursday, May 12, 2022 8:15 PM
> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> <yuji2.ishikawa@toshiba.co.jp>; Rob Herring <robh+dt@kernel.org>;
> iwamatsu nobuhiro(岩松 信洋 □ＳＷＣ◯ＡＣＴ)
> <nobuhiro1.iwamatsu@toshiba.co.jp>; Sumit Semwal
> <sumit.semwal@linaro.org>; Christian König <christian.koenig@amd.com>
> Cc: linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
> linux-media@vger.kernel.org; dri-devel@lists.freedesktop.org;
> linaro-mm-sig@lists.linaro.org
> Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing
> accelerator driver
> 
> Hi Yuji,
> 
> On 4/28/22 15:11, Yuji Ishikawa wrote:
> > This series is the DNN image processing accelerator driver for Toshiba's ARM
> SoC, Visconti[0].
> > This provides DT binding documentation, device driver, MAINTAINER files.
> >
> > The second patch "soc: visconti: Add Toshiba Visconti image processing
> accelerator common source"
> > and the fourth patch "MAINTAINERS: ..." are the same as the ones in the
> preceding post for affine driver.
> 
> There appears to be no documentation whatsoever, unless I am missing
> something.
> 
> How is the uAPI supposed to be used? What does it do? What formats does it
> accept or produce?
> 
> If this processes images, then (as Laurent mentioned) this is more suitable as a
> V4L2 mem2mem driver.
> 
> See
> https://linuxtv.org/downloads/v4l-dvb-apis-new/userspace-api/v4l/dev-me
> m2mem.html
> and the many drivers in drivers/media that use it (git grep v4l2-mem2mem.h).
> 
> But without any explanation whatsoever I have no idea what does or does not
> make sense.
> 
> Regards,
> 
> 	Hans
> 
> >
> > Best regards,
> > Yuji
> >
> > [0]:
> >
> https://toshiba.semicon-storage.com/ap-en/semiconductor/product/image-
> > recognition-processors-visconti.html
> >
> > Yuji Ishikawa (4):
> >   dt-bindings: soc: visconti: Add Toshiba Visconti DNN image processing
> >     accelerator bindings
> >   soc: visconti: Add Toshiba Visconti image processing accelerator
> >     common source
> >   soc: visconti: Add Toshiba Visconti DNN image processing accelerator
> >   MAINTAINERS: Add entries for Toshiba Visconti DNN image processing
> >     accelerator
> >
> >  .../soc/visconti/toshiba,visconti-dnn.yaml    |  54 ++
> >  MAINTAINERS                                   |   2 +
> >  drivers/soc/Kconfig                           |   1 +
> >  drivers/soc/Makefile                          |   1 +
> >  drivers/soc/visconti/Kconfig                  |   7 +
> >  drivers/soc/visconti/Makefile                 |   8 +
> >  drivers/soc/visconti/dnn/Makefile             |   6 +
> >  drivers/soc/visconti/dnn/dnn.c                | 533
> ++++++++++++++++++
> >  drivers/soc/visconti/dnn/hwd_dnn.c            | 183 ++++++
> >  drivers/soc/visconti/dnn/hwd_dnn.h            |  68 +++
> >  drivers/soc/visconti/dnn/hwd_dnn_reg.h        | 228 ++++++++
> >  drivers/soc/visconti/ipa_common.c             |  55 ++
> >  drivers/soc/visconti/ipa_common.h             |  18 +
> >  drivers/soc/visconti/uapi/dnn.h               |  77 +++
> >  drivers/soc/visconti/uapi/ipa.h               |  88 +++
> >  15 files changed, 1329 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.ya
> > ml  create mode 100644 drivers/soc/visconti/Kconfig  create mode
> > 100644 drivers/soc/visconti/Makefile  create mode 100644
> > drivers/soc/visconti/dnn/Makefile  create mode 100644
> > drivers/soc/visconti/dnn/dnn.c  create mode 100644
> > drivers/soc/visconti/dnn/hwd_dnn.c
> >  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.h
> >  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn_reg.h
> >  create mode 100644 drivers/soc/visconti/ipa_common.c  create mode
> > 100644 drivers/soc/visconti/ipa_common.h  create mode 100644
> > drivers/soc/visconti/uapi/dnn.h  create mode 100644
> > drivers/soc/visconti/uapi/ipa.h
> >
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing accelerator driver
  2022-05-20  9:48     ` yuji2.ishikawa
  (?)
@ 2022-05-20 10:02       ` Hans Verkuil
  -1 siblings, 0 replies; 36+ messages in thread
From: Hans Verkuil @ 2022-05-20 10:02 UTC (permalink / raw)
  To: yuji2.ishikawa, robh+dt, nobuhiro1.iwamatsu, sumit.semwal,
	christian.koenig
  Cc: linux-arm-kernel, linux-kernel, linux-media, dri-devel, linaro-mm-sig

Hi Yuji,

On 5/20/22 11:48, yuji2.ishikawa@toshiba.co.jp wrote:
> Hi Hans,
> 
> Thank you for your comment.
> I agree that this submission lacks documents sharing basic idea of the accelerators; what do they accept and what do they yield.
> Where can I put a new document? Can I put it as a comment in a source? Can I add a file under Documentation/misc-devices directory?

Start with explaining it by replying to this mail. Without knowing anything
about the hardware, it is difficult to say what the best place is. Usually
it is either the public API header, or somewhere in Documentation.

The first step is to have a better understanding of the Visconti image hardware
and to see what the best subsystem would be to support that hardware.

Regards,

	Hans

> 
> Thanks,
> Yuji Ishikawa
> 
>> -----Original Message-----
>> From: Hans Verkuil <hverkuil@xs4all.nl>
>> Sent: Thursday, May 12, 2022 8:15 PM
>> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
>> <yuji2.ishikawa@toshiba.co.jp>; Rob Herring <robh+dt@kernel.org>;
>> iwamatsu nobuhiro(岩松 信洋 □ＳＷＣ◯ＡＣＴ)
>> <nobuhiro1.iwamatsu@toshiba.co.jp>; Sumit Semwal
>> <sumit.semwal@linaro.org>; Christian König <christian.koenig@amd.com>
>> Cc: linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
>> linux-media@vger.kernel.org; dri-devel@lists.freedesktop.org;
>> linaro-mm-sig@lists.linaro.org
>> Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing
>> accelerator driver
>>
>> Hi Yuji,
>>
>> On 4/28/22 15:11, Yuji Ishikawa wrote:
>>> This series is the DNN image processing accelerator driver for Toshiba's ARM
>> SoC, Visconti[0].
>>> This provides DT binding documentation, device driver, MAINTAINER files.
>>>
>>> The second patch "soc: visconti: Add Toshiba Visconti image processing
>> accelerator common source"
>>> and the fourth patch "MAINTAINERS: ..." are the same as the ones in the
>> preceding post for affine driver.
>>
>> There appears to be no documentation whatsoever, unless I am missing
>> something.
>>
>> How is the uAPI supposed to be used? What does it do? What formats does it
>> accept or produce?
>>
>> If this processes images, then (as Laurent mentioned) this is more suitable as a
>> V4L2 mem2mem driver.
>>
>> See
>> https://linuxtv.org/downloads/v4l-dvb-apis-new/userspace-api/v4l/dev-me
>> m2mem.html
>> and the many drivers in drivers/media that use it (git grep v4l2-mem2mem.h).
>>
>> But without any explanation whatsoever I have no idea what does or does not
>> make sense.
>>
>> Regards,
>>
>> 	Hans
>>
>>>
>>> Best regards,
>>> Yuji
>>>
>>> [0]:
>>>
>> https://toshiba.semicon-storage.com/ap-en/semiconductor/product/image-
>>> recognition-processors-visconti.html
>>>
>>> Yuji Ishikawa (4):
>>>   dt-bindings: soc: visconti: Add Toshiba Visconti DNN image processing
>>>     accelerator bindings
>>>   soc: visconti: Add Toshiba Visconti image processing accelerator
>>>     common source
>>>   soc: visconti: Add Toshiba Visconti DNN image processing accelerator
>>>   MAINTAINERS: Add entries for Toshiba Visconti DNN image processing
>>>     accelerator
>>>
>>>  .../soc/visconti/toshiba,visconti-dnn.yaml    |  54 ++
>>>  MAINTAINERS                                   |   2 +
>>>  drivers/soc/Kconfig                           |   1 +
>>>  drivers/soc/Makefile                          |   1 +
>>>  drivers/soc/visconti/Kconfig                  |   7 +
>>>  drivers/soc/visconti/Makefile                 |   8 +
>>>  drivers/soc/visconti/dnn/Makefile             |   6 +
>>>  drivers/soc/visconti/dnn/dnn.c                | 533
>> ++++++++++++++++++
>>>  drivers/soc/visconti/dnn/hwd_dnn.c            | 183 ++++++
>>>  drivers/soc/visconti/dnn/hwd_dnn.h            |  68 +++
>>>  drivers/soc/visconti/dnn/hwd_dnn_reg.h        | 228 ++++++++
>>>  drivers/soc/visconti/ipa_common.c             |  55 ++
>>>  drivers/soc/visconti/ipa_common.h             |  18 +
>>>  drivers/soc/visconti/uapi/dnn.h               |  77 +++
>>>  drivers/soc/visconti/uapi/ipa.h               |  88 +++
>>>  15 files changed, 1329 insertions(+)
>>>  create mode 100644
>>> Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.ya
>>> ml  create mode 100644 drivers/soc/visconti/Kconfig  create mode
>>> 100644 drivers/soc/visconti/Makefile  create mode 100644
>>> drivers/soc/visconti/dnn/Makefile  create mode 100644
>>> drivers/soc/visconti/dnn/dnn.c  create mode 100644
>>> drivers/soc/visconti/dnn/hwd_dnn.c
>>>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.h
>>>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn_reg.h
>>>  create mode 100644 drivers/soc/visconti/ipa_common.c  create mode
>>> 100644 drivers/soc/visconti/ipa_common.h  create mode 100644
>>> drivers/soc/visconti/uapi/dnn.h  create mode 100644
>>> drivers/soc/visconti/uapi/ipa.h
>>>

^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing accelerator driver
@ 2022-05-20 10:02       ` Hans Verkuil
  0 siblings, 0 replies; 36+ messages in thread
From: Hans Verkuil @ 2022-05-20 10:02 UTC (permalink / raw)
  To: yuji2.ishikawa, robh+dt, nobuhiro1.iwamatsu, sumit.semwal,
	christian.koenig
  Cc: linaro-mm-sig, dri-devel, linux-kernel, linux-arm-kernel, linux-media

Hi Yuji,

On 5/20/22 11:48, yuji2.ishikawa@toshiba.co.jp wrote:
> Hi Hans,
> 
> Thank you for your comment.
> I agree that this submission lacks documents sharing basic idea of the accelerators; what do they accept and what do they yield.
> Where can I put a new document? Can I put it as a comment in a source? Can I add a file under Documentation/misc-devices directory?

Start with explaining it by replying to this mail. Without knowing anything
about the hardware, it is difficult to say what the best place is. Usually
it is either the public API header, or somewhere in Documentation.

The first step is to have a better understanding of the Visconti image hardware
and to see what the best subsystem would be to support that hardware.

Regards,

	Hans

> 
> Thanks,
> Yuji Ishikawa
> 
>> -----Original Message-----
>> From: Hans Verkuil <hverkuil@xs4all.nl>
>> Sent: Thursday, May 12, 2022 8:15 PM
>> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
>> <yuji2.ishikawa@toshiba.co.jp>; Rob Herring <robh+dt@kernel.org>;
>> iwamatsu nobuhiro(岩松 信洋 □ＳＷＣ◯ＡＣＴ)
>> <nobuhiro1.iwamatsu@toshiba.co.jp>; Sumit Semwal
>> <sumit.semwal@linaro.org>; Christian König <christian.koenig@amd.com>
>> Cc: linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
>> linux-media@vger.kernel.org; dri-devel@lists.freedesktop.org;
>> linaro-mm-sig@lists.linaro.org
>> Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing
>> accelerator driver
>>
>> Hi Yuji,
>>
>> On 4/28/22 15:11, Yuji Ishikawa wrote:
>>> This series is the DNN image processing accelerator driver for Toshiba's ARM
>> SoC, Visconti[0].
>>> This provides DT binding documentation, device driver, MAINTAINER files.
>>>
>>> The second patch "soc: visconti: Add Toshiba Visconti image processing
>> accelerator common source"
>>> and the fourth patch "MAINTAINERS: ..." are the same as the ones in the
>> preceding post for affine driver.
>>
>> There appears to be no documentation whatsoever, unless I am missing
>> something.
>>
>> How is the uAPI supposed to be used? What does it do? What formats does it
>> accept or produce?
>>
>> If this processes images, then (as Laurent mentioned) this is more suitable as a
>> V4L2 mem2mem driver.
>>
>> See
>> https://linuxtv.org/downloads/v4l-dvb-apis-new/userspace-api/v4l/dev-me
>> m2mem.html
>> and the many drivers in drivers/media that use it (git grep v4l2-mem2mem.h).
>>
>> But without any explanation whatsoever I have no idea what does or does not
>> make sense.
>>
>> Regards,
>>
>> 	Hans
>>
>>>
>>> Best regards,
>>> Yuji
>>>
>>> [0]:
>>>
>> https://toshiba.semicon-storage.com/ap-en/semiconductor/product/image-
>>> recognition-processors-visconti.html
>>>
>>> Yuji Ishikawa (4):
>>>   dt-bindings: soc: visconti: Add Toshiba Visconti DNN image processing
>>>     accelerator bindings
>>>   soc: visconti: Add Toshiba Visconti image processing accelerator
>>>     common source
>>>   soc: visconti: Add Toshiba Visconti DNN image processing accelerator
>>>   MAINTAINERS: Add entries for Toshiba Visconti DNN image processing
>>>     accelerator
>>>
>>>  .../soc/visconti/toshiba,visconti-dnn.yaml    |  54 ++
>>>  MAINTAINERS                                   |   2 +
>>>  drivers/soc/Kconfig                           |   1 +
>>>  drivers/soc/Makefile                          |   1 +
>>>  drivers/soc/visconti/Kconfig                  |   7 +
>>>  drivers/soc/visconti/Makefile                 |   8 +
>>>  drivers/soc/visconti/dnn/Makefile             |   6 +
>>>  drivers/soc/visconti/dnn/dnn.c                | 533
>> ++++++++++++++++++
>>>  drivers/soc/visconti/dnn/hwd_dnn.c            | 183 ++++++
>>>  drivers/soc/visconti/dnn/hwd_dnn.h            |  68 +++
>>>  drivers/soc/visconti/dnn/hwd_dnn_reg.h        | 228 ++++++++
>>>  drivers/soc/visconti/ipa_common.c             |  55 ++
>>>  drivers/soc/visconti/ipa_common.h             |  18 +
>>>  drivers/soc/visconti/uapi/dnn.h               |  77 +++
>>>  drivers/soc/visconti/uapi/ipa.h               |  88 +++
>>>  15 files changed, 1329 insertions(+)
>>>  create mode 100644
>>> Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.ya
>>> ml  create mode 100644 drivers/soc/visconti/Kconfig  create mode
>>> 100644 drivers/soc/visconti/Makefile  create mode 100644
>>> drivers/soc/visconti/dnn/Makefile  create mode 100644
>>> drivers/soc/visconti/dnn/dnn.c  create mode 100644
>>> drivers/soc/visconti/dnn/hwd_dnn.c
>>>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.h
>>>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn_reg.h
>>>  create mode 100644 drivers/soc/visconti/ipa_common.c  create mode
>>> 100644 drivers/soc/visconti/ipa_common.h  create mode 100644
>>> drivers/soc/visconti/uapi/dnn.h  create mode 100644
>>> drivers/soc/visconti/uapi/ipa.h
>>>

^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing accelerator driver
@ 2022-05-20 10:02       ` Hans Verkuil
  0 siblings, 0 replies; 36+ messages in thread
From: Hans Verkuil @ 2022-05-20 10:02 UTC (permalink / raw)
  To: yuji2.ishikawa, robh+dt, nobuhiro1.iwamatsu, sumit.semwal,
	christian.koenig
  Cc: linux-arm-kernel, linux-kernel, linux-media, dri-devel, linaro-mm-sig

Hi Yuji,

On 5/20/22 11:48, yuji2.ishikawa@toshiba.co.jp wrote:
> Hi Hans,
> 
> Thank you for your comment.
> I agree that this submission lacks documents sharing basic idea of the accelerators; what do they accept and what do they yield.
> Where can I put a new document? Can I put it as a comment in a source? Can I add a file under Documentation/misc-devices directory?

Start with explaining it by replying to this mail. Without knowing anything
about the hardware, it is difficult to say what the best place is. Usually
it is either the public API header, or somewhere in Documentation.

The first step is to have a better understanding of the Visconti image hardware
and to see what the best subsystem would be to support that hardware.

Regards,

	Hans

> 
> Thanks,
> Yuji Ishikawa
> 
>> -----Original Message-----
>> From: Hans Verkuil <hverkuil@xs4all.nl>
>> Sent: Thursday, May 12, 2022 8:15 PM
>> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
>> <yuji2.ishikawa@toshiba.co.jp>; Rob Herring <robh+dt@kernel.org>;
>> iwamatsu nobuhiro(岩松 信洋 □ＳＷＣ◯ＡＣＴ)
>> <nobuhiro1.iwamatsu@toshiba.co.jp>; Sumit Semwal
>> <sumit.semwal@linaro.org>; Christian König <christian.koenig@amd.com>
>> Cc: linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
>> linux-media@vger.kernel.org; dri-devel@lists.freedesktop.org;
>> linaro-mm-sig@lists.linaro.org
>> Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing
>> accelerator driver
>>
>> Hi Yuji,
>>
>> On 4/28/22 15:11, Yuji Ishikawa wrote:
>>> This series is the DNN image processing accelerator driver for Toshiba's ARM
>> SoC, Visconti[0].
>>> This provides DT binding documentation, device driver, MAINTAINER files.
>>>
>>> The second patch "soc: visconti: Add Toshiba Visconti image processing
>> accelerator common source"
>>> and the fourth patch "MAINTAINERS: ..." are the same as the ones in the
>> preceding post for affine driver.
>>
>> There appears to be no documentation whatsoever, unless I am missing
>> something.
>>
>> How is the uAPI supposed to be used? What does it do? What formats does it
>> accept or produce?
>>
>> If this processes images, then (as Laurent mentioned) this is more suitable as a
>> V4L2 mem2mem driver.
>>
>> See
>> https://linuxtv.org/downloads/v4l-dvb-apis-new/userspace-api/v4l/dev-me
>> m2mem.html
>> and the many drivers in drivers/media that use it (git grep v4l2-mem2mem.h).
>>
>> But without any explanation whatsoever I have no idea what does or does not
>> make sense.
>>
>> Regards,
>>
>> 	Hans
>>
>>>
>>> Best regards,
>>> Yuji
>>>
>>> [0]:
>>>
>> https://toshiba.semicon-storage.com/ap-en/semiconductor/product/image-
>>> recognition-processors-visconti.html
>>>
>>> Yuji Ishikawa (4):
>>>   dt-bindings: soc: visconti: Add Toshiba Visconti DNN image processing
>>>     accelerator bindings
>>>   soc: visconti: Add Toshiba Visconti image processing accelerator
>>>     common source
>>>   soc: visconti: Add Toshiba Visconti DNN image processing accelerator
>>>   MAINTAINERS: Add entries for Toshiba Visconti DNN image processing
>>>     accelerator
>>>
>>>  .../soc/visconti/toshiba,visconti-dnn.yaml    |  54 ++
>>>  MAINTAINERS                                   |   2 +
>>>  drivers/soc/Kconfig                           |   1 +
>>>  drivers/soc/Makefile                          |   1 +
>>>  drivers/soc/visconti/Kconfig                  |   7 +
>>>  drivers/soc/visconti/Makefile                 |   8 +
>>>  drivers/soc/visconti/dnn/Makefile             |   6 +
>>>  drivers/soc/visconti/dnn/dnn.c                | 533
>> ++++++++++++++++++
>>>  drivers/soc/visconti/dnn/hwd_dnn.c            | 183 ++++++
>>>  drivers/soc/visconti/dnn/hwd_dnn.h            |  68 +++
>>>  drivers/soc/visconti/dnn/hwd_dnn_reg.h        | 228 ++++++++
>>>  drivers/soc/visconti/ipa_common.c             |  55 ++
>>>  drivers/soc/visconti/ipa_common.h             |  18 +
>>>  drivers/soc/visconti/uapi/dnn.h               |  77 +++
>>>  drivers/soc/visconti/uapi/ipa.h               |  88 +++
>>>  15 files changed, 1329 insertions(+)
>>>  create mode 100644
>>> Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.ya
>>> ml  create mode 100644 drivers/soc/visconti/Kconfig  create mode
>>> 100644 drivers/soc/visconti/Makefile  create mode 100644
>>> drivers/soc/visconti/dnn/Makefile  create mode 100644
>>> drivers/soc/visconti/dnn/dnn.c  create mode 100644
>>> drivers/soc/visconti/dnn/hwd_dnn.c
>>>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.h
>>>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn_reg.h
>>>  create mode 100644 drivers/soc/visconti/ipa_common.c  create mode
>>> 100644 drivers/soc/visconti/ipa_common.h  create mode 100644
>>> drivers/soc/visconti/uapi/dnn.h  create mode 100644
>>> drivers/soc/visconti/uapi/ipa.h
>>>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 36+ messages in thread

* RE: [PATCH 0/4] Add Toshiba Visconti DNN image processing accelerator driver
  2022-05-20 10:02       ` Hans Verkuil
  (?)
@ 2022-06-01  1:40         ` yuji2.ishikawa
  -1 siblings, 0 replies; 36+ messages in thread
From: yuji2.ishikawa @ 2022-06-01  1:40 UTC (permalink / raw)
  To: hverkuil, robh+dt, nobuhiro1.iwamatsu, sumit.semwal, christian.koenig
  Cc: linaro-mm-sig, dri-devel, linux-kernel, linux-arm-kernel, linux-media

Hi Hans,

Thank you for your advice.
I prepared some description of DNN accelerator and its usage.

#### Handling memory blocks for Visconti5 accelerators

Visconti5 Image-Processing-Accelerators do not have fine grained IOMMU, as CPU have.
Therefore, memory region to be passed to the accelerators should be physically contiguous.
We use DMA-BUF backed by CMA (Contiguous Memory Allocator) to allocate memory regions for sharing between CPU/IPAs.
Originally, in v4.19 based implementation, the ION allocator was used to allocate DMA-BUF instances.
For the latest implementation, DMA-BUF HEAPS is used.

Two structure types are used to represent memory region passed to drivers.
* struct drv_ipa_buffer_info
  * to describe whole DMA-BUF instance
* struct drv_ipa_addr
  * to describe a memory region in a DMA-BUF instance

for details, see usage sample of each IPA driver


#### Image Processing Accelerators overview

Visconti5 SoC has following image processing accererators

* AFFINE: 1 input image, 1 output image;                                             Affine transform, Homography transform, Polynomial lens distortion, LUT transform
* DNN:    N input feature vector, N output feature vector;                           Deep neural network operation
* PYRAMID 3 input image, 3 * N output image;                                         Resize grayscale/color image with N different parameters
* DSPIF:  M input image, N output image;                                             Various opeations on images
* HOX:    1 input image (multi ROI), 1 input dictionary1 likelihood/feature vector;  Extended Histogram of Oriented Gradient based pattern matching
* HAMAT:  2 input feature vectors: 1 output corrdinate vector;                       Hamming distance matching for stereo vision
* FLMAT:  3 input image, N input feature point, N output matched point;              Optical flow matching
* SMLDB:  1 input image, N input feature point, N output feature vector;             Accelerated-KAZE feature descriptor accelerator
* STMAT:  2 input image, 1 output disparity image;                                   Stereo disparity

see [0] Fig 7.2.1 for block diagram (of prototype chip)


#### DNN accelerator overview

DNN accelerator is a proprietary CNN/DCNN processing accelerator developed by Toshiba.
Visconti5 SoC has 2 instances of DNN acclerator hardware.
Users convert existing Caffe/ONNX models to Visconti compatible models with an offline tool.
A converted model "Configuration Binary" includes:
  * instruction sequence for given network
  * weight/bias information
  * DMA configuration from/to global memory (for input/output feature)

DNN acccelerator can handle either 1 plane or multiple ROIs at a single call.

see [0] Fig 7.2.2 for block diagram of DNN accelerator

CNN: Convolutional Neural Network
DCNN: Deep Convolutional Neural Network


#### Input / Output

Input image or feature: base type is either of FP16, FP32, INT8, UINT8, INT16
Output feature vector:  base type is either of FP16, FP32, INT8, UINT8, INT16

Input, Output, Weight, Bias can be placed on global memory and loaded/stored with DMA within DNN accelerator.
These data on global memory can be specified as either of:
  * single address to point single data block
  * list of address to point multiple data blocks (i.e. ROIs)

DNN acclerator driver accepts an instance of "struct drv_dnn_descriptor" which includes addresses of input/output features and a configuration binary.


#### Descriptor Builder at userland

Following APIs are provided to build a descriptor instance at userland.

/* defined in drv_dnn_util.h */
int32_t drv_DNN_config_descript_init(struct drv_dnn_descriptor *desc, struct drv_ipa_buffer_info *buffer, int32_t buffer_num);
int32_t drv_DNN_config_exec_configuration(struct drv_dnn_descriptor *desc, const void *configuration_binary,
                                          struct drv_ipa_addr configuration_binary_addr, struct drv_ipa_addr *src_list,
                                          struct drv_ipa_addr *dst_list, int32_t list_num, struct drv_ipa_addr temporary_addr,
                                          int32_t temporary_size);
int32_t drv_DNN_config_descript_finalize(struct drv_dnn_descriptor *desc);

struct drv_dnn_descriptor is defined in drivers/soc/visconti/uapi/dnn.h.
I think this header should be placed anywhere else to be collected on "make headers_install" action of kernel building.


#### Usage sample (without error handlers)

    #include <linux/dma-heap.h>
    #include "drv_ipa.h"
    #include "drv_dnn.h"
    #include "drv_dnn_util.h" 

    int allocate_buffer(int fd_heap, int size) 
    {
        struct dma_heap_allocation_data heap_data_in={0};
        int ret;

        heap_data_in.len = ROUNDUP_POW2(size);
        heap_data_in.fd_flags = O_RDWR | O_CLOEXEC;

        ret = ioctl(fd_heap, DMA_HEAP_IOCTL_ALLOC, &heap_data_in);
        if (ret <0)
            return -1;
        else
            return heap_data_in.fd;
    }

    void dnn_sample(int fd_dnn, int fd_conf, int fd_src, int fd_dst, int fd_temp)
    {
        int32_t ret;
        struct drv_ipa_buffer_info bufinfo[4] = {
            {.fd=fd_conf, .coherent=true, .direction=DRV_IPA_DIR_TO_DEVICE},
            {.fd=fd_src,  .coherent=true, .direction=DRV_IPA_DIR_TO_DEVICE},
            {.fd=fd_dst,  .coherent=true, .direction=DRV_IPA_DIR_FROM_DEVICE},
            {.fd=fd_temp, .coherent=true, .direction=DRV_IPA_DIR_FROM_DEVICE},
        };
        struct drv_ipa_addr conf_addr = {.buffer_index=0, .offset=0};
        struct drv_ipa_addr src_addr  = {.buffer_index=1, .offset=0};
        struct drv_ipa_addr dst_addr  = {.buffer_index=2, .offset=0};
        struct drv_ipa_addr temp_addr = {.buffer_index=3, .offset=0};
        struct drv_dnn_descriptor desc;

        struct drv_ipa_addr src_list[] = {src_addr};
        struct drv_ipa_addr dst_list[] = {dst_addr};

        uint8_t *config = (uint8_t*)mmap(NULL, DNN_CONF_BIN_SIZE, PROT_READ, MAP_SHARED, fd_conf, 0);

        drv_DNN_config_descript_init(&desc, bufinfo, 4);
        drv_DNN_config_exec_configuration(&desc, config, conf_addr, src_list, dst_list, 1, temp_addr, TEMP_BUF_SIZE);
        drv_DNN_config_descript_finalize(&desc);

        ioctl(fd_dnn, IOC_IPA_START, &desc);

        {
            struct pollfd fds[] = {.fd=fd_dnn, .events=POLL_IN, .revents=0};
            poll(fds, 1, 1000);
        }
    }

    void sample()
    {
        int fd_dnn, fd_heap, fd_conf, fd_src, fd_dst, fd_temp;

        fd_dnn = open("/dev/dnn0", O_RDWR);
        fd_heap = open("/dev/dma_heap/linux,cma", O_RDWR);
        fd_conf = allocate_buffer(fd_heap, DNN_CONF_BIN_ALLOC_SIZE);
        fd_src  = allocate_buffer(fd_heap, INPUT_IMG_ALLOC_SIZE);
        fd_dst  = allocate_buffer(fd_heap, OUTPUT_IMG_ALLOC_SIZE);
        fd_temp = allocate_buffer(fd_heap, TEMP_BUF_ALLOC_SIZE);

        /* fill in input image and configuration here */

        dnn_sample(fd_dnn, fd_conf, fd_src, fd_dst, fd_temp);

        ...
    };


#### Reference

* [0] https://toshiba.semicon-storage.com/content/dam/toshiba-ss-v2/master/en/company/technical-review/pdf/technical-review-18_e.pdf
  * Fig 7.2.1 shows the whole architecture of prototype chip
  * Fig 7.2.2 shows the architecture of DNN accelerator


Regards,
Yuji

> -----Original Message-----
> From: Hans Verkuil <hverkuil@xs4all.nl>
> Sent: Friday, May 20, 2022 7:03 PM
> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> <yuji2.ishikawa@toshiba.co.jp>; robh+dt@kernel.org; iwamatsu nobuhiro(岩松
> 信洋 □ＳＷＣ◯ＡＣＴ) <nobuhiro1.iwamatsu@toshiba.co.jp>;
> sumit.semwal@linaro.org; christian.koenig@amd.com
> Cc: linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
> linux-media@vger.kernel.org; dri-devel@lists.freedesktop.org;
> linaro-mm-sig@lists.linaro.org
> Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing
> accelerator driver
> 
> Hi Yuji,
> 
> On 5/20/22 11:48, yuji2.ishikawa@toshiba.co.jp wrote:
> > Hi Hans,
> >
> > Thank you for your comment.
> > I agree that this submission lacks documents sharing basic idea of the
> accelerators; what do they accept and what do they yield.
> > Where can I put a new document? Can I put it as a comment in a source? Can
> I add a file under Documentation/misc-devices directory?
> 
> Start with explaining it by replying to this mail. Without knowing anything about
> the hardware, it is difficult to say what the best place is. Usually it is either the
> public API header, or somewhere in Documentation.
> 
> The first step is to have a better understanding of the Visconti image hardware
> and to see what the best subsystem would be to support that hardware.
> 
> Regards,
> 
> 	Hans
> 
> >
> > Thanks,
> > Yuji Ishikawa
> >
> >> -----Original Message-----
> >> From: Hans Verkuil <hverkuil@xs4all.nl>
> >> Sent: Thursday, May 12, 2022 8:15 PM
> >> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> >> <yuji2.ishikawa@toshiba.co.jp>; Rob Herring <robh+dt@kernel.org>;
> >> iwamatsu nobuhiro(岩松 信洋 □ＳＷＣ◯ＡＣＴ)
> >> <nobuhiro1.iwamatsu@toshiba.co.jp>; Sumit Semwal
> >> <sumit.semwal@linaro.org>; Christian König
> <christian.koenig@amd.com>
> >> Cc: linux-arm-kernel@lists.infradead.org;
> >> linux-kernel@vger.kernel.org; linux-media@vger.kernel.org;
> >> dri-devel@lists.freedesktop.org; linaro-mm-sig@lists.linaro.org
> >> Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing
> >> accelerator driver
> >>
> >> Hi Yuji,
> >>
> >> On 4/28/22 15:11, Yuji Ishikawa wrote:
> >>> This series is the DNN image processing accelerator driver for
> >>> Toshiba's ARM
> >> SoC, Visconti[0].
> >>> This provides DT binding documentation, device driver, MAINTAINER
> files.
> >>>
> >>> The second patch "soc: visconti: Add Toshiba Visconti image
> >>> processing
> >> accelerator common source"
> >>> and the fourth patch "MAINTAINERS: ..." are the same as the ones in
> >>> the
> >> preceding post for affine driver.
> >>
> >> There appears to be no documentation whatsoever, unless I am missing
> >> something.
> >>
> >> How is the uAPI supposed to be used? What does it do? What formats
> >> does it accept or produce?
> >>
> >> If this processes images, then (as Laurent mentioned) this is more
> >> suitable as a
> >> V4L2 mem2mem driver.
> >>
> >> See
> >> https://linuxtv.org/downloads/v4l-dvb-apis-new/userspace-api/v4l/dev-
> >> me
> >> m2mem.html
> >> and the many drivers in drivers/media that use it (git grep
> v4l2-mem2mem.h).
> >>
> >> But without any explanation whatsoever I have no idea what does or
> >> does not make sense.
> >>
> >> Regards,
> >>
> >> 	Hans
> >>
> >>>
> >>> Best regards,
> >>> Yuji
> >>>
> >>> [0]:
> >>>
> >>
> https://toshiba.semicon-storage.com/ap-en/semiconductor/product/image
> >> -
> >>> recognition-processors-visconti.html
> >>>
> >>> Yuji Ishikawa (4):
> >>>   dt-bindings: soc: visconti: Add Toshiba Visconti DNN image processing
> >>>     accelerator bindings
> >>>   soc: visconti: Add Toshiba Visconti image processing accelerator
> >>>     common source
> >>>   soc: visconti: Add Toshiba Visconti DNN image processing accelerator
> >>>   MAINTAINERS: Add entries for Toshiba Visconti DNN image processing
> >>>     accelerator
> >>>
> >>>  .../soc/visconti/toshiba,visconti-dnn.yaml    |  54 ++
> >>>  MAINTAINERS                                   |   2 +
> >>>  drivers/soc/Kconfig                           |   1 +
> >>>  drivers/soc/Makefile                          |   1 +
> >>>  drivers/soc/visconti/Kconfig                  |   7 +
> >>>  drivers/soc/visconti/Makefile                 |   8 +
> >>>  drivers/soc/visconti/dnn/Makefile             |   6 +
> >>>  drivers/soc/visconti/dnn/dnn.c                | 533
> >> ++++++++++++++++++
> >>>  drivers/soc/visconti/dnn/hwd_dnn.c            | 183 ++++++
> >>>  drivers/soc/visconti/dnn/hwd_dnn.h            |  68 +++
> >>>  drivers/soc/visconti/dnn/hwd_dnn_reg.h        | 228 ++++++++
> >>>  drivers/soc/visconti/ipa_common.c             |  55 ++
> >>>  drivers/soc/visconti/ipa_common.h             |  18 +
> >>>  drivers/soc/visconti/uapi/dnn.h               |  77 +++
> >>>  drivers/soc/visconti/uapi/ipa.h               |  88 +++
> >>>  15 files changed, 1329 insertions(+)  create mode 100644
> >>> Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.
> >>> ya ml  create mode 100644 drivers/soc/visconti/Kconfig  create mode
> >>> 100644 drivers/soc/visconti/Makefile  create mode 100644
> >>> drivers/soc/visconti/dnn/Makefile  create mode 100644
> >>> drivers/soc/visconti/dnn/dnn.c  create mode 100644
> >>> drivers/soc/visconti/dnn/hwd_dnn.c
> >>>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.h
> >>>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn_reg.h
> >>>  create mode 100644 drivers/soc/visconti/ipa_common.c  create mode
> >>> 100644 drivers/soc/visconti/ipa_common.h  create mode 100644
> >>> drivers/soc/visconti/uapi/dnn.h  create mode 100644
> >>> drivers/soc/visconti/uapi/ipa.h
> >>>

^ permalink raw reply	[flat|nested] 36+ messages in thread

* RE: [PATCH 0/4] Add Toshiba Visconti DNN image processing accelerator driver
@ 2022-06-01  1:40         ` yuji2.ishikawa
  0 siblings, 0 replies; 36+ messages in thread
From: yuji2.ishikawa @ 2022-06-01  1:40 UTC (permalink / raw)
  To: hverkuil, robh+dt, nobuhiro1.iwamatsu, sumit.semwal, christian.koenig
  Cc: linux-arm-kernel, linux-kernel, linux-media, dri-devel, linaro-mm-sig

Hi Hans,

Thank you for your advice.
I prepared some description of DNN accelerator and its usage.

#### Handling memory blocks for Visconti5 accelerators

Visconti5 Image-Processing-Accelerators do not have fine grained IOMMU, as CPU have.
Therefore, memory region to be passed to the accelerators should be physically contiguous.
We use DMA-BUF backed by CMA (Contiguous Memory Allocator) to allocate memory regions for sharing between CPU/IPAs.
Originally, in v4.19 based implementation, the ION allocator was used to allocate DMA-BUF instances.
For the latest implementation, DMA-BUF HEAPS is used.

Two structure types are used to represent memory region passed to drivers.
* struct drv_ipa_buffer_info
  * to describe whole DMA-BUF instance
* struct drv_ipa_addr
  * to describe a memory region in a DMA-BUF instance

for details, see usage sample of each IPA driver


#### Image Processing Accelerators overview

Visconti5 SoC has following image processing accererators

* AFFINE: 1 input image, 1 output image;                                             Affine transform, Homography transform, Polynomial lens distortion, LUT transform
* DNN:    N input feature vector, N output feature vector;                           Deep neural network operation
* PYRAMID 3 input image, 3 * N output image;                                         Resize grayscale/color image with N different parameters
* DSPIF:  M input image, N output image;                                             Various opeations on images
* HOX:    1 input image (multi ROI), 1 input dictionary1 likelihood/feature vector;  Extended Histogram of Oriented Gradient based pattern matching
* HAMAT:  2 input feature vectors: 1 output corrdinate vector;                       Hamming distance matching for stereo vision
* FLMAT:  3 input image, N input feature point, N output matched point;              Optical flow matching
* SMLDB:  1 input image, N input feature point, N output feature vector;             Accelerated-KAZE feature descriptor accelerator
* STMAT:  2 input image, 1 output disparity image;                                   Stereo disparity

see [0] Fig 7.2.1 for block diagram (of prototype chip)


#### DNN accelerator overview

DNN accelerator is a proprietary CNN/DCNN processing accelerator developed by Toshiba.
Visconti5 SoC has 2 instances of DNN acclerator hardware.
Users convert existing Caffe/ONNX models to Visconti compatible models with an offline tool.
A converted model "Configuration Binary" includes:
  * instruction sequence for given network
  * weight/bias information
  * DMA configuration from/to global memory (for input/output feature)

DNN acccelerator can handle either 1 plane or multiple ROIs at a single call.

see [0] Fig 7.2.2 for block diagram of DNN accelerator

CNN: Convolutional Neural Network
DCNN: Deep Convolutional Neural Network


#### Input / Output

Input image or feature: base type is either of FP16, FP32, INT8, UINT8, INT16
Output feature vector:  base type is either of FP16, FP32, INT8, UINT8, INT16

Input, Output, Weight, Bias can be placed on global memory and loaded/stored with DMA within DNN accelerator.
These data on global memory can be specified as either of:
  * single address to point single data block
  * list of address to point multiple data blocks (i.e. ROIs)

DNN acclerator driver accepts an instance of "struct drv_dnn_descriptor" which includes addresses of input/output features and a configuration binary.


#### Descriptor Builder at userland

Following APIs are provided to build a descriptor instance at userland.

/* defined in drv_dnn_util.h */
int32_t drv_DNN_config_descript_init(struct drv_dnn_descriptor *desc, struct drv_ipa_buffer_info *buffer, int32_t buffer_num);
int32_t drv_DNN_config_exec_configuration(struct drv_dnn_descriptor *desc, const void *configuration_binary,
                                          struct drv_ipa_addr configuration_binary_addr, struct drv_ipa_addr *src_list,
                                          struct drv_ipa_addr *dst_list, int32_t list_num, struct drv_ipa_addr temporary_addr,
                                          int32_t temporary_size);
int32_t drv_DNN_config_descript_finalize(struct drv_dnn_descriptor *desc);

struct drv_dnn_descriptor is defined in drivers/soc/visconti/uapi/dnn.h.
I think this header should be placed anywhere else to be collected on "make headers_install" action of kernel building.


#### Usage sample (without error handlers)

    #include <linux/dma-heap.h>
    #include "drv_ipa.h"
    #include "drv_dnn.h"
    #include "drv_dnn_util.h" 

    int allocate_buffer(int fd_heap, int size) 
    {
        struct dma_heap_allocation_data heap_data_in={0};
        int ret;

        heap_data_in.len = ROUNDUP_POW2(size);
        heap_data_in.fd_flags = O_RDWR | O_CLOEXEC;

        ret = ioctl(fd_heap, DMA_HEAP_IOCTL_ALLOC, &heap_data_in);
        if (ret <0)
            return -1;
        else
            return heap_data_in.fd;
    }

    void dnn_sample(int fd_dnn, int fd_conf, int fd_src, int fd_dst, int fd_temp)
    {
        int32_t ret;
        struct drv_ipa_buffer_info bufinfo[4] = {
            {.fd=fd_conf, .coherent=true, .direction=DRV_IPA_DIR_TO_DEVICE},
            {.fd=fd_src,  .coherent=true, .direction=DRV_IPA_DIR_TO_DEVICE},
            {.fd=fd_dst,  .coherent=true, .direction=DRV_IPA_DIR_FROM_DEVICE},
            {.fd=fd_temp, .coherent=true, .direction=DRV_IPA_DIR_FROM_DEVICE},
        };
        struct drv_ipa_addr conf_addr = {.buffer_index=0, .offset=0};
        struct drv_ipa_addr src_addr  = {.buffer_index=1, .offset=0};
        struct drv_ipa_addr dst_addr  = {.buffer_index=2, .offset=0};
        struct drv_ipa_addr temp_addr = {.buffer_index=3, .offset=0};
        struct drv_dnn_descriptor desc;

        struct drv_ipa_addr src_list[] = {src_addr};
        struct drv_ipa_addr dst_list[] = {dst_addr};

        uint8_t *config = (uint8_t*)mmap(NULL, DNN_CONF_BIN_SIZE, PROT_READ, MAP_SHARED, fd_conf, 0);

        drv_DNN_config_descript_init(&desc, bufinfo, 4);
        drv_DNN_config_exec_configuration(&desc, config, conf_addr, src_list, dst_list, 1, temp_addr, TEMP_BUF_SIZE);
        drv_DNN_config_descript_finalize(&desc);

        ioctl(fd_dnn, IOC_IPA_START, &desc);

        {
            struct pollfd fds[] = {.fd=fd_dnn, .events=POLL_IN, .revents=0};
            poll(fds, 1, 1000);
        }
    }

    void sample()
    {
        int fd_dnn, fd_heap, fd_conf, fd_src, fd_dst, fd_temp;

        fd_dnn = open("/dev/dnn0", O_RDWR);
        fd_heap = open("/dev/dma_heap/linux,cma", O_RDWR);
        fd_conf = allocate_buffer(fd_heap, DNN_CONF_BIN_ALLOC_SIZE);
        fd_src  = allocate_buffer(fd_heap, INPUT_IMG_ALLOC_SIZE);
        fd_dst  = allocate_buffer(fd_heap, OUTPUT_IMG_ALLOC_SIZE);
        fd_temp = allocate_buffer(fd_heap, TEMP_BUF_ALLOC_SIZE);

        /* fill in input image and configuration here */

        dnn_sample(fd_dnn, fd_conf, fd_src, fd_dst, fd_temp);

        ...
    };


#### Reference

* [0] https://toshiba.semicon-storage.com/content/dam/toshiba-ss-v2/master/en/company/technical-review/pdf/technical-review-18_e.pdf
  * Fig 7.2.1 shows the whole architecture of prototype chip
  * Fig 7.2.2 shows the architecture of DNN accelerator


Regards,
Yuji

> -----Original Message-----
> From: Hans Verkuil <hverkuil@xs4all.nl>
> Sent: Friday, May 20, 2022 7:03 PM
> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> <yuji2.ishikawa@toshiba.co.jp>; robh+dt@kernel.org; iwamatsu nobuhiro(岩松
> 信洋 □ＳＷＣ◯ＡＣＴ) <nobuhiro1.iwamatsu@toshiba.co.jp>;
> sumit.semwal@linaro.org; christian.koenig@amd.com
> Cc: linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
> linux-media@vger.kernel.org; dri-devel@lists.freedesktop.org;
> linaro-mm-sig@lists.linaro.org
> Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing
> accelerator driver
> 
> Hi Yuji,
> 
> On 5/20/22 11:48, yuji2.ishikawa@toshiba.co.jp wrote:
> > Hi Hans,
> >
> > Thank you for your comment.
> > I agree that this submission lacks documents sharing basic idea of the
> accelerators; what do they accept and what do they yield.
> > Where can I put a new document? Can I put it as a comment in a source? Can
> I add a file under Documentation/misc-devices directory?
> 
> Start with explaining it by replying to this mail. Without knowing anything about
> the hardware, it is difficult to say what the best place is. Usually it is either the
> public API header, or somewhere in Documentation.
> 
> The first step is to have a better understanding of the Visconti image hardware
> and to see what the best subsystem would be to support that hardware.
> 
> Regards,
> 
> 	Hans
> 
> >
> > Thanks,
> > Yuji Ishikawa
> >
> >> -----Original Message-----
> >> From: Hans Verkuil <hverkuil@xs4all.nl>
> >> Sent: Thursday, May 12, 2022 8:15 PM
> >> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> >> <yuji2.ishikawa@toshiba.co.jp>; Rob Herring <robh+dt@kernel.org>;
> >> iwamatsu nobuhiro(岩松 信洋 □ＳＷＣ◯ＡＣＴ)
> >> <nobuhiro1.iwamatsu@toshiba.co.jp>; Sumit Semwal
> >> <sumit.semwal@linaro.org>; Christian König
> <christian.koenig@amd.com>
> >> Cc: linux-arm-kernel@lists.infradead.org;
> >> linux-kernel@vger.kernel.org; linux-media@vger.kernel.org;
> >> dri-devel@lists.freedesktop.org; linaro-mm-sig@lists.linaro.org
> >> Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing
> >> accelerator driver
> >>
> >> Hi Yuji,
> >>
> >> On 4/28/22 15:11, Yuji Ishikawa wrote:
> >>> This series is the DNN image processing accelerator driver for
> >>> Toshiba's ARM
> >> SoC, Visconti[0].
> >>> This provides DT binding documentation, device driver, MAINTAINER
> files.
> >>>
> >>> The second patch "soc: visconti: Add Toshiba Visconti image
> >>> processing
> >> accelerator common source"
> >>> and the fourth patch "MAINTAINERS: ..." are the same as the ones in
> >>> the
> >> preceding post for affine driver.
> >>
> >> There appears to be no documentation whatsoever, unless I am missing
> >> something.
> >>
> >> How is the uAPI supposed to be used? What does it do? What formats
> >> does it accept or produce?
> >>
> >> If this processes images, then (as Laurent mentioned) this is more
> >> suitable as a
> >> V4L2 mem2mem driver.
> >>
> >> See
> >> https://linuxtv.org/downloads/v4l-dvb-apis-new/userspace-api/v4l/dev-
> >> me
> >> m2mem.html
> >> and the many drivers in drivers/media that use it (git grep
> v4l2-mem2mem.h).
> >>
> >> But without any explanation whatsoever I have no idea what does or
> >> does not make sense.
> >>
> >> Regards,
> >>
> >> 	Hans
> >>
> >>>
> >>> Best regards,
> >>> Yuji
> >>>
> >>> [0]:
> >>>
> >>
> https://toshiba.semicon-storage.com/ap-en/semiconductor/product/image
> >> -
> >>> recognition-processors-visconti.html
> >>>
> >>> Yuji Ishikawa (4):
> >>>   dt-bindings: soc: visconti: Add Toshiba Visconti DNN image processing
> >>>     accelerator bindings
> >>>   soc: visconti: Add Toshiba Visconti image processing accelerator
> >>>     common source
> >>>   soc: visconti: Add Toshiba Visconti DNN image processing accelerator
> >>>   MAINTAINERS: Add entries for Toshiba Visconti DNN image processing
> >>>     accelerator
> >>>
> >>>  .../soc/visconti/toshiba,visconti-dnn.yaml    |  54 ++
> >>>  MAINTAINERS                                   |   2 +
> >>>  drivers/soc/Kconfig                           |   1 +
> >>>  drivers/soc/Makefile                          |   1 +
> >>>  drivers/soc/visconti/Kconfig                  |   7 +
> >>>  drivers/soc/visconti/Makefile                 |   8 +
> >>>  drivers/soc/visconti/dnn/Makefile             |   6 +
> >>>  drivers/soc/visconti/dnn/dnn.c                | 533
> >> ++++++++++++++++++
> >>>  drivers/soc/visconti/dnn/hwd_dnn.c            | 183 ++++++
> >>>  drivers/soc/visconti/dnn/hwd_dnn.h            |  68 +++
> >>>  drivers/soc/visconti/dnn/hwd_dnn_reg.h        | 228 ++++++++
> >>>  drivers/soc/visconti/ipa_common.c             |  55 ++
> >>>  drivers/soc/visconti/ipa_common.h             |  18 +
> >>>  drivers/soc/visconti/uapi/dnn.h               |  77 +++
> >>>  drivers/soc/visconti/uapi/ipa.h               |  88 +++
> >>>  15 files changed, 1329 insertions(+)  create mode 100644
> >>> Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.
> >>> ya ml  create mode 100644 drivers/soc/visconti/Kconfig  create mode
> >>> 100644 drivers/soc/visconti/Makefile  create mode 100644
> >>> drivers/soc/visconti/dnn/Makefile  create mode 100644
> >>> drivers/soc/visconti/dnn/dnn.c  create mode 100644
> >>> drivers/soc/visconti/dnn/hwd_dnn.c
> >>>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.h
> >>>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn_reg.h
> >>>  create mode 100644 drivers/soc/visconti/ipa_common.c  create mode
> >>> 100644 drivers/soc/visconti/ipa_common.h  create mode 100644
> >>> drivers/soc/visconti/uapi/dnn.h  create mode 100644
> >>> drivers/soc/visconti/uapi/ipa.h
> >>>

^ permalink raw reply	[flat|nested] 36+ messages in thread

* RE: [PATCH 0/4] Add Toshiba Visconti DNN image processing accelerator driver
@ 2022-06-01  1:40         ` yuji2.ishikawa
  0 siblings, 0 replies; 36+ messages in thread
From: yuji2.ishikawa @ 2022-06-01  1:40 UTC (permalink / raw)
  To: hverkuil, robh+dt, nobuhiro1.iwamatsu, sumit.semwal, christian.koenig
  Cc: linux-arm-kernel, linux-kernel, linux-media, dri-devel, linaro-mm-sig

Hi Hans,

Thank you for your advice.
I prepared some description of DNN accelerator and its usage.

#### Handling memory blocks for Visconti5 accelerators

Visconti5 Image-Processing-Accelerators do not have fine grained IOMMU, as CPU have.
Therefore, memory region to be passed to the accelerators should be physically contiguous.
We use DMA-BUF backed by CMA (Contiguous Memory Allocator) to allocate memory regions for sharing between CPU/IPAs.
Originally, in v4.19 based implementation, the ION allocator was used to allocate DMA-BUF instances.
For the latest implementation, DMA-BUF HEAPS is used.

Two structure types are used to represent memory region passed to drivers.
* struct drv_ipa_buffer_info
  * to describe whole DMA-BUF instance
* struct drv_ipa_addr
  * to describe a memory region in a DMA-BUF instance

for details, see usage sample of each IPA driver


#### Image Processing Accelerators overview

Visconti5 SoC has following image processing accererators

* AFFINE: 1 input image, 1 output image;                                             Affine transform, Homography transform, Polynomial lens distortion, LUT transform
* DNN:    N input feature vector, N output feature vector;                           Deep neural network operation
* PYRAMID 3 input image, 3 * N output image;                                         Resize grayscale/color image with N different parameters
* DSPIF:  M input image, N output image;                                             Various opeations on images
* HOX:    1 input image (multi ROI), 1 input dictionary1 likelihood/feature vector;  Extended Histogram of Oriented Gradient based pattern matching
* HAMAT:  2 input feature vectors: 1 output corrdinate vector;                       Hamming distance matching for stereo vision
* FLMAT:  3 input image, N input feature point, N output matched point;              Optical flow matching
* SMLDB:  1 input image, N input feature point, N output feature vector;             Accelerated-KAZE feature descriptor accelerator
* STMAT:  2 input image, 1 output disparity image;                                   Stereo disparity

see [0] Fig 7.2.1 for block diagram (of prototype chip)


#### DNN accelerator overview

DNN accelerator is a proprietary CNN/DCNN processing accelerator developed by Toshiba.
Visconti5 SoC has 2 instances of DNN acclerator hardware.
Users convert existing Caffe/ONNX models to Visconti compatible models with an offline tool.
A converted model "Configuration Binary" includes:
  * instruction sequence for given network
  * weight/bias information
  * DMA configuration from/to global memory (for input/output feature)

DNN acccelerator can handle either 1 plane or multiple ROIs at a single call.

see [0] Fig 7.2.2 for block diagram of DNN accelerator

CNN: Convolutional Neural Network
DCNN: Deep Convolutional Neural Network


#### Input / Output

Input image or feature: base type is either of FP16, FP32, INT8, UINT8, INT16
Output feature vector:  base type is either of FP16, FP32, INT8, UINT8, INT16

Input, Output, Weight, Bias can be placed on global memory and loaded/stored with DMA within DNN accelerator.
These data on global memory can be specified as either of:
  * single address to point single data block
  * list of address to point multiple data blocks (i.e. ROIs)

DNN acclerator driver accepts an instance of "struct drv_dnn_descriptor" which includes addresses of input/output features and a configuration binary.


#### Descriptor Builder at userland

Following APIs are provided to build a descriptor instance at userland.

/* defined in drv_dnn_util.h */
int32_t drv_DNN_config_descript_init(struct drv_dnn_descriptor *desc, struct drv_ipa_buffer_info *buffer, int32_t buffer_num);
int32_t drv_DNN_config_exec_configuration(struct drv_dnn_descriptor *desc, const void *configuration_binary,
                                          struct drv_ipa_addr configuration_binary_addr, struct drv_ipa_addr *src_list,
                                          struct drv_ipa_addr *dst_list, int32_t list_num, struct drv_ipa_addr temporary_addr,
                                          int32_t temporary_size);
int32_t drv_DNN_config_descript_finalize(struct drv_dnn_descriptor *desc);

struct drv_dnn_descriptor is defined in drivers/soc/visconti/uapi/dnn.h.
I think this header should be placed anywhere else to be collected on "make headers_install" action of kernel building.


#### Usage sample (without error handlers)

    #include <linux/dma-heap.h>
    #include "drv_ipa.h"
    #include "drv_dnn.h"
    #include "drv_dnn_util.h" 

    int allocate_buffer(int fd_heap, int size) 
    {
        struct dma_heap_allocation_data heap_data_in={0};
        int ret;

        heap_data_in.len = ROUNDUP_POW2(size);
        heap_data_in.fd_flags = O_RDWR | O_CLOEXEC;

        ret = ioctl(fd_heap, DMA_HEAP_IOCTL_ALLOC, &heap_data_in);
        if (ret <0)
            return -1;
        else
            return heap_data_in.fd;
    }

    void dnn_sample(int fd_dnn, int fd_conf, int fd_src, int fd_dst, int fd_temp)
    {
        int32_t ret;
        struct drv_ipa_buffer_info bufinfo[4] = {
            {.fd=fd_conf, .coherent=true, .direction=DRV_IPA_DIR_TO_DEVICE},
            {.fd=fd_src,  .coherent=true, .direction=DRV_IPA_DIR_TO_DEVICE},
            {.fd=fd_dst,  .coherent=true, .direction=DRV_IPA_DIR_FROM_DEVICE},
            {.fd=fd_temp, .coherent=true, .direction=DRV_IPA_DIR_FROM_DEVICE},
        };
        struct drv_ipa_addr conf_addr = {.buffer_index=0, .offset=0};
        struct drv_ipa_addr src_addr  = {.buffer_index=1, .offset=0};
        struct drv_ipa_addr dst_addr  = {.buffer_index=2, .offset=0};
        struct drv_ipa_addr temp_addr = {.buffer_index=3, .offset=0};
        struct drv_dnn_descriptor desc;

        struct drv_ipa_addr src_list[] = {src_addr};
        struct drv_ipa_addr dst_list[] = {dst_addr};

        uint8_t *config = (uint8_t*)mmap(NULL, DNN_CONF_BIN_SIZE, PROT_READ, MAP_SHARED, fd_conf, 0);

        drv_DNN_config_descript_init(&desc, bufinfo, 4);
        drv_DNN_config_exec_configuration(&desc, config, conf_addr, src_list, dst_list, 1, temp_addr, TEMP_BUF_SIZE);
        drv_DNN_config_descript_finalize(&desc);

        ioctl(fd_dnn, IOC_IPA_START, &desc);

        {
            struct pollfd fds[] = {.fd=fd_dnn, .events=POLL_IN, .revents=0};
            poll(fds, 1, 1000);
        }
    }

    void sample()
    {
        int fd_dnn, fd_heap, fd_conf, fd_src, fd_dst, fd_temp;

        fd_dnn = open("/dev/dnn0", O_RDWR);
        fd_heap = open("/dev/dma_heap/linux,cma", O_RDWR);
        fd_conf = allocate_buffer(fd_heap, DNN_CONF_BIN_ALLOC_SIZE);
        fd_src  = allocate_buffer(fd_heap, INPUT_IMG_ALLOC_SIZE);
        fd_dst  = allocate_buffer(fd_heap, OUTPUT_IMG_ALLOC_SIZE);
        fd_temp = allocate_buffer(fd_heap, TEMP_BUF_ALLOC_SIZE);

        /* fill in input image and configuration here */

        dnn_sample(fd_dnn, fd_conf, fd_src, fd_dst, fd_temp);

        ...
    };


#### Reference

* [0] https://toshiba.semicon-storage.com/content/dam/toshiba-ss-v2/master/en/company/technical-review/pdf/technical-review-18_e.pdf
  * Fig 7.2.1 shows the whole architecture of prototype chip
  * Fig 7.2.2 shows the architecture of DNN accelerator


Regards,
Yuji

> -----Original Message-----
> From: Hans Verkuil <hverkuil@xs4all.nl>
> Sent: Friday, May 20, 2022 7:03 PM
> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> <yuji2.ishikawa@toshiba.co.jp>; robh+dt@kernel.org; iwamatsu nobuhiro(岩松
> 信洋 □ＳＷＣ◯ＡＣＴ) <nobuhiro1.iwamatsu@toshiba.co.jp>;
> sumit.semwal@linaro.org; christian.koenig@amd.com
> Cc: linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
> linux-media@vger.kernel.org; dri-devel@lists.freedesktop.org;
> linaro-mm-sig@lists.linaro.org
> Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing
> accelerator driver
> 
> Hi Yuji,
> 
> On 5/20/22 11:48, yuji2.ishikawa@toshiba.co.jp wrote:
> > Hi Hans,
> >
> > Thank you for your comment.
> > I agree that this submission lacks documents sharing basic idea of the
> accelerators; what do they accept and what do they yield.
> > Where can I put a new document? Can I put it as a comment in a source? Can
> I add a file under Documentation/misc-devices directory?
> 
> Start with explaining it by replying to this mail. Without knowing anything about
> the hardware, it is difficult to say what the best place is. Usually it is either the
> public API header, or somewhere in Documentation.
> 
> The first step is to have a better understanding of the Visconti image hardware
> and to see what the best subsystem would be to support that hardware.
> 
> Regards,
> 
> 	Hans
> 
> >
> > Thanks,
> > Yuji Ishikawa
> >
> >> -----Original Message-----
> >> From: Hans Verkuil <hverkuil@xs4all.nl>
> >> Sent: Thursday, May 12, 2022 8:15 PM
> >> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> >> <yuji2.ishikawa@toshiba.co.jp>; Rob Herring <robh+dt@kernel.org>;
> >> iwamatsu nobuhiro(岩松 信洋 □ＳＷＣ◯ＡＣＴ)
> >> <nobuhiro1.iwamatsu@toshiba.co.jp>; Sumit Semwal
> >> <sumit.semwal@linaro.org>; Christian König
> <christian.koenig@amd.com>
> >> Cc: linux-arm-kernel@lists.infradead.org;
> >> linux-kernel@vger.kernel.org; linux-media@vger.kernel.org;
> >> dri-devel@lists.freedesktop.org; linaro-mm-sig@lists.linaro.org
> >> Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing
> >> accelerator driver
> >>
> >> Hi Yuji,
> >>
> >> On 4/28/22 15:11, Yuji Ishikawa wrote:
> >>> This series is the DNN image processing accelerator driver for
> >>> Toshiba's ARM
> >> SoC, Visconti[0].
> >>> This provides DT binding documentation, device driver, MAINTAINER
> files.
> >>>
> >>> The second patch "soc: visconti: Add Toshiba Visconti image
> >>> processing
> >> accelerator common source"
> >>> and the fourth patch "MAINTAINERS: ..." are the same as the ones in
> >>> the
> >> preceding post for affine driver.
> >>
> >> There appears to be no documentation whatsoever, unless I am missing
> >> something.
> >>
> >> How is the uAPI supposed to be used? What does it do? What formats
> >> does it accept or produce?
> >>
> >> If this processes images, then (as Laurent mentioned) this is more
> >> suitable as a
> >> V4L2 mem2mem driver.
> >>
> >> See
> >> https://linuxtv.org/downloads/v4l-dvb-apis-new/userspace-api/v4l/dev-
> >> me
> >> m2mem.html
> >> and the many drivers in drivers/media that use it (git grep
> v4l2-mem2mem.h).
> >>
> >> But without any explanation whatsoever I have no idea what does or
> >> does not make sense.
> >>
> >> Regards,
> >>
> >> 	Hans
> >>
> >>>
> >>> Best regards,
> >>> Yuji
> >>>
> >>> [0]:
> >>>
> >>
> https://toshiba.semicon-storage.com/ap-en/semiconductor/product/image
> >> -
> >>> recognition-processors-visconti.html
> >>>
> >>> Yuji Ishikawa (4):
> >>>   dt-bindings: soc: visconti: Add Toshiba Visconti DNN image processing
> >>>     accelerator bindings
> >>>   soc: visconti: Add Toshiba Visconti image processing accelerator
> >>>     common source
> >>>   soc: visconti: Add Toshiba Visconti DNN image processing accelerator
> >>>   MAINTAINERS: Add entries for Toshiba Visconti DNN image processing
> >>>     accelerator
> >>>
> >>>  .../soc/visconti/toshiba,visconti-dnn.yaml    |  54 ++
> >>>  MAINTAINERS                                   |   2 +
> >>>  drivers/soc/Kconfig                           |   1 +
> >>>  drivers/soc/Makefile                          |   1 +
> >>>  drivers/soc/visconti/Kconfig                  |   7 +
> >>>  drivers/soc/visconti/Makefile                 |   8 +
> >>>  drivers/soc/visconti/dnn/Makefile             |   6 +
> >>>  drivers/soc/visconti/dnn/dnn.c                | 533
> >> ++++++++++++++++++
> >>>  drivers/soc/visconti/dnn/hwd_dnn.c            | 183 ++++++
> >>>  drivers/soc/visconti/dnn/hwd_dnn.h            |  68 +++
> >>>  drivers/soc/visconti/dnn/hwd_dnn_reg.h        | 228 ++++++++
> >>>  drivers/soc/visconti/ipa_common.c             |  55 ++
> >>>  drivers/soc/visconti/ipa_common.h             |  18 +
> >>>  drivers/soc/visconti/uapi/dnn.h               |  77 +++
> >>>  drivers/soc/visconti/uapi/ipa.h               |  88 +++
> >>>  15 files changed, 1329 insertions(+)  create mode 100644
> >>> Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.
> >>> ya ml  create mode 100644 drivers/soc/visconti/Kconfig  create mode
> >>> 100644 drivers/soc/visconti/Makefile  create mode 100644
> >>> drivers/soc/visconti/dnn/Makefile  create mode 100644
> >>> drivers/soc/visconti/dnn/dnn.c  create mode 100644
> >>> drivers/soc/visconti/dnn/hwd_dnn.c
> >>>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.h
> >>>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn_reg.h
> >>>  create mode 100644 drivers/soc/visconti/ipa_common.c  create mode
> >>> 100644 drivers/soc/visconti/ipa_common.h  create mode 100644
> >>> drivers/soc/visconti/uapi/dnn.h  create mode 100644
> >>> drivers/soc/visconti/uapi/ipa.h
> >>>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing accelerator driver
  2022-06-01  1:40         ` yuji2.ishikawa
  (?)
@ 2022-06-29 13:44           ` Hans Verkuil
  -1 siblings, 0 replies; 36+ messages in thread
From: Hans Verkuil @ 2022-06-29 13:44 UTC (permalink / raw)
  To: yuji2.ishikawa, robh+dt, nobuhiro1.iwamatsu, sumit.semwal,
	christian.koenig
  Cc: linux-arm-kernel, linux-kernel, linux-media, dri-devel, linaro-mm-sig

My apologies for the late reply...

On 01/06/2022 03:40, yuji2.ishikawa@toshiba.co.jp wrote:
> Hi Hans,
> 
> Thank you for your advice.
> I prepared some description of DNN accelerator and its usage.
> 
> #### Handling memory blocks for Visconti5 accelerators
> 
> Visconti5 Image-Processing-Accelerators do not have fine grained IOMMU, as CPU have.
> Therefore, memory region to be passed to the accelerators should be physically contiguous.
> We use DMA-BUF backed by CMA (Contiguous Memory Allocator) to allocate memory regions for sharing between CPU/IPAs.
> Originally, in v4.19 based implementation, the ION allocator was used to allocate DMA-BUF instances.
> For the latest implementation, DMA-BUF HEAPS is used.
> 
> Two structure types are used to represent memory region passed to drivers.
> * struct drv_ipa_buffer_info
>   * to describe whole DMA-BUF instance
> * struct drv_ipa_addr
>   * to describe a memory region in a DMA-BUF instance
> 
> for details, see usage sample of each IPA driver
> 
> 
> #### Image Processing Accelerators overview
> 
> Visconti5 SoC has following image processing accererators
> 
> * AFFINE: 1 input image, 1 output image;                                             Affine transform, Homography transform, Polynomial lens distortion, LUT transform
> * DNN:    N input feature vector, N output feature vector;                           Deep neural network operation
> * PYRAMID 3 input image, 3 * N output image;                                         Resize grayscale/color image with N different parameters
> * DSPIF:  M input image, N output image;                                             Various opeations on images
> * HOX:    1 input image (multi ROI), 1 input dictionary1 likelihood/feature vector;  Extended Histogram of Oriented Gradient based pattern matching
> * HAMAT:  2 input feature vectors: 1 output corrdinate vector;                       Hamming distance matching for stereo vision
> * FLMAT:  3 input image, N input feature point, N output matched point;              Optical flow matching
> * SMLDB:  1 input image, N input feature point, N output feature vector;             Accelerated-KAZE feature descriptor accelerator
> * STMAT:  2 input image, 1 output disparity image;                                   Stereo disparity

It's not really easy to decide what is best. I would say that if both input and output
are images (RGB, YUV, Grayscale), then a V4L2 memory-to-memory driver is what I would
expect to see.

Where that is not the case, then a more custom approach makes sense.

In the list above I would put AFFINE, PYRAMID, DSPIF and possible STMAT in the V4L2
driver group, and the others more as custom drivers.

I think it also depends on how it is used: if a captured sensor image is
typically passed in for further processing, i.e. it is closely related to the
video ISP, then V4L2 is a reasonable choice.

A DNN driver, on the other hand, isn't using images at all, so for that something
like this driver makes sense.

Regards,

	Hans

> 
> see [0] Fig 7.2.1 for block diagram (of prototype chip)
> 
> 
> #### DNN accelerator overview
> 
> DNN accelerator is a proprietary CNN/DCNN processing accelerator developed by Toshiba.
> Visconti5 SoC has 2 instances of DNN acclerator hardware.
> Users convert existing Caffe/ONNX models to Visconti compatible models with an offline tool.
> A converted model "Configuration Binary" includes:
>   * instruction sequence for given network
>   * weight/bias information
>   * DMA configuration from/to global memory (for input/output feature)
> 
> DNN acccelerator can handle either 1 plane or multiple ROIs at a single call.
> 
> see [0] Fig 7.2.2 for block diagram of DNN accelerator
> 
> CNN: Convolutional Neural Network
> DCNN: Deep Convolutional Neural Network
> 
> 
> #### Input / Output
> 
> Input image or feature: base type is either of FP16, FP32, INT8, UINT8, INT16
> Output feature vector:  base type is either of FP16, FP32, INT8, UINT8, INT16
> 
> Input, Output, Weight, Bias can be placed on global memory and loaded/stored with DMA within DNN accelerator.
> These data on global memory can be specified as either of:
>   * single address to point single data block
>   * list of address to point multiple data blocks (i.e. ROIs)
> 
> DNN acclerator driver accepts an instance of "struct drv_dnn_descriptor" which includes addresses of input/output features and a configuration binary.
> 
> 
> #### Descriptor Builder at userland
> 
> Following APIs are provided to build a descriptor instance at userland.
> 
> /* defined in drv_dnn_util.h */
> int32_t drv_DNN_config_descript_init(struct drv_dnn_descriptor *desc, struct drv_ipa_buffer_info *buffer, int32_t buffer_num);
> int32_t drv_DNN_config_exec_configuration(struct drv_dnn_descriptor *desc, const void *configuration_binary,
>                                           struct drv_ipa_addr configuration_binary_addr, struct drv_ipa_addr *src_list,
>                                           struct drv_ipa_addr *dst_list, int32_t list_num, struct drv_ipa_addr temporary_addr,
>                                           int32_t temporary_size);
> int32_t drv_DNN_config_descript_finalize(struct drv_dnn_descriptor *desc);
> 
> struct drv_dnn_descriptor is defined in drivers/soc/visconti/uapi/dnn.h.
> I think this header should be placed anywhere else to be collected on "make headers_install" action of kernel building.
> 
> 
> #### Usage sample (without error handlers)
> 
>     #include <linux/dma-heap.h>
>     #include "drv_ipa.h"
>     #include "drv_dnn.h"
>     #include "drv_dnn_util.h" 
> 
>     int allocate_buffer(int fd_heap, int size) 
>     {
>         struct dma_heap_allocation_data heap_data_in={0};
>         int ret;
> 
>         heap_data_in.len = ROUNDUP_POW2(size);
>         heap_data_in.fd_flags = O_RDWR | O_CLOEXEC;
> 
>         ret = ioctl(fd_heap, DMA_HEAP_IOCTL_ALLOC, &heap_data_in);
>         if (ret <0)
>             return -1;
>         else
>             return heap_data_in.fd;
>     }
> 
>     void dnn_sample(int fd_dnn, int fd_conf, int fd_src, int fd_dst, int fd_temp)
>     {
>         int32_t ret;
>         struct drv_ipa_buffer_info bufinfo[4] = {
>             {.fd=fd_conf, .coherent=true, .direction=DRV_IPA_DIR_TO_DEVICE},
>             {.fd=fd_src,  .coherent=true, .direction=DRV_IPA_DIR_TO_DEVICE},
>             {.fd=fd_dst,  .coherent=true, .direction=DRV_IPA_DIR_FROM_DEVICE},
>             {.fd=fd_temp, .coherent=true, .direction=DRV_IPA_DIR_FROM_DEVICE},
>         };
>         struct drv_ipa_addr conf_addr = {.buffer_index=0, .offset=0};
>         struct drv_ipa_addr src_addr  = {.buffer_index=1, .offset=0};
>         struct drv_ipa_addr dst_addr  = {.buffer_index=2, .offset=0};
>         struct drv_ipa_addr temp_addr = {.buffer_index=3, .offset=0};
>         struct drv_dnn_descriptor desc;
> 
>         struct drv_ipa_addr src_list[] = {src_addr};
>         struct drv_ipa_addr dst_list[] = {dst_addr};
> 
>         uint8_t *config = (uint8_t*)mmap(NULL, DNN_CONF_BIN_SIZE, PROT_READ, MAP_SHARED, fd_conf, 0);
> 
>         drv_DNN_config_descript_init(&desc, bufinfo, 4);
>         drv_DNN_config_exec_configuration(&desc, config, conf_addr, src_list, dst_list, 1, temp_addr, TEMP_BUF_SIZE);
>         drv_DNN_config_descript_finalize(&desc);
> 
>         ioctl(fd_dnn, IOC_IPA_START, &desc);
> 
>         {
>             struct pollfd fds[] = {.fd=fd_dnn, .events=POLL_IN, .revents=0};
>             poll(fds, 1, 1000);
>         }
>     }
> 
>     void sample()
>     {
>         int fd_dnn, fd_heap, fd_conf, fd_src, fd_dst, fd_temp;
> 
>         fd_dnn = open("/dev/dnn0", O_RDWR);
>         fd_heap = open("/dev/dma_heap/linux,cma", O_RDWR);
>         fd_conf = allocate_buffer(fd_heap, DNN_CONF_BIN_ALLOC_SIZE);
>         fd_src  = allocate_buffer(fd_heap, INPUT_IMG_ALLOC_SIZE);
>         fd_dst  = allocate_buffer(fd_heap, OUTPUT_IMG_ALLOC_SIZE);
>         fd_temp = allocate_buffer(fd_heap, TEMP_BUF_ALLOC_SIZE);
> 
>         /* fill in input image and configuration here */
> 
>         dnn_sample(fd_dnn, fd_conf, fd_src, fd_dst, fd_temp);
> 
>         ...
>     };
> 
> 
> #### Reference
> 
> * [0] https://toshiba.semicon-storage.com/content/dam/toshiba-ss-v2/master/en/company/technical-review/pdf/technical-review-18_e.pdf
>   * Fig 7.2.1 shows the whole architecture of prototype chip
>   * Fig 7.2.2 shows the architecture of DNN accelerator
> 
> 
> Regards,
> Yuji
> 
>> -----Original Message-----
>> From: Hans Verkuil <hverkuil@xs4all.nl>
>> Sent: Friday, May 20, 2022 7:03 PM
>> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
>> <yuji2.ishikawa@toshiba.co.jp>; robh+dt@kernel.org; iwamatsu nobuhiro(岩松
>> 信洋 □ＳＷＣ◯ＡＣＴ) <nobuhiro1.iwamatsu@toshiba.co.jp>;
>> sumit.semwal@linaro.org; christian.koenig@amd.com
>> Cc: linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
>> linux-media@vger.kernel.org; dri-devel@lists.freedesktop.org;
>> linaro-mm-sig@lists.linaro.org
>> Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing
>> accelerator driver
>>
>> Hi Yuji,
>>
>> On 5/20/22 11:48, yuji2.ishikawa@toshiba.co.jp wrote:
>>> Hi Hans,
>>>
>>> Thank you for your comment.
>>> I agree that this submission lacks documents sharing basic idea of the
>> accelerators; what do they accept and what do they yield.
>>> Where can I put a new document? Can I put it as a comment in a source? Can
>> I add a file under Documentation/misc-devices directory?
>>
>> Start with explaining it by replying to this mail. Without knowing anything about
>> the hardware, it is difficult to say what the best place is. Usually it is either the
>> public API header, or somewhere in Documentation.
>>
>> The first step is to have a better understanding of the Visconti image hardware
>> and to see what the best subsystem would be to support that hardware.
>>
>> Regards,
>>
>> 	Hans
>>
>>>
>>> Thanks,
>>> Yuji Ishikawa
>>>
>>>> -----Original Message-----
>>>> From: Hans Verkuil <hverkuil@xs4all.nl>
>>>> Sent: Thursday, May 12, 2022 8:15 PM
>>>> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
>>>> <yuji2.ishikawa@toshiba.co.jp>; Rob Herring <robh+dt@kernel.org>;
>>>> iwamatsu nobuhiro(岩松 信洋 □ＳＷＣ◯ＡＣＴ)
>>>> <nobuhiro1.iwamatsu@toshiba.co.jp>; Sumit Semwal
>>>> <sumit.semwal@linaro.org>; Christian König
>> <christian.koenig@amd.com>
>>>> Cc: linux-arm-kernel@lists.infradead.org;
>>>> linux-kernel@vger.kernel.org; linux-media@vger.kernel.org;
>>>> dri-devel@lists.freedesktop.org; linaro-mm-sig@lists.linaro.org
>>>> Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing
>>>> accelerator driver
>>>>
>>>> Hi Yuji,
>>>>
>>>> On 4/28/22 15:11, Yuji Ishikawa wrote:
>>>>> This series is the DNN image processing accelerator driver for
>>>>> Toshiba's ARM
>>>> SoC, Visconti[0].
>>>>> This provides DT binding documentation, device driver, MAINTAINER
>> files.
>>>>>
>>>>> The second patch "soc: visconti: Add Toshiba Visconti image
>>>>> processing
>>>> accelerator common source"
>>>>> and the fourth patch "MAINTAINERS: ..." are the same as the ones in
>>>>> the
>>>> preceding post for affine driver.
>>>>
>>>> There appears to be no documentation whatsoever, unless I am missing
>>>> something.
>>>>
>>>> How is the uAPI supposed to be used? What does it do? What formats
>>>> does it accept or produce?
>>>>
>>>> If this processes images, then (as Laurent mentioned) this is more
>>>> suitable as a
>>>> V4L2 mem2mem driver.
>>>>
>>>> See
>>>> https://linuxtv.org/downloads/v4l-dvb-apis-new/userspace-api/v4l/dev-
>>>> me
>>>> m2mem.html
>>>> and the many drivers in drivers/media that use it (git grep
>> v4l2-mem2mem.h).
>>>>
>>>> But without any explanation whatsoever I have no idea what does or
>>>> does not make sense.
>>>>
>>>> Regards,
>>>>
>>>> 	Hans
>>>>
>>>>>
>>>>> Best regards,
>>>>> Yuji
>>>>>
>>>>> [0]:
>>>>>
>>>>
>> https://toshiba.semicon-storage.com/ap-en/semiconductor/product/image
>>>> -
>>>>> recognition-processors-visconti.html
>>>>>
>>>>> Yuji Ishikawa (4):
>>>>>   dt-bindings: soc: visconti: Add Toshiba Visconti DNN image processing
>>>>>     accelerator bindings
>>>>>   soc: visconti: Add Toshiba Visconti image processing accelerator
>>>>>     common source
>>>>>   soc: visconti: Add Toshiba Visconti DNN image processing accelerator
>>>>>   MAINTAINERS: Add entries for Toshiba Visconti DNN image processing
>>>>>     accelerator
>>>>>
>>>>>  .../soc/visconti/toshiba,visconti-dnn.yaml    |  54 ++
>>>>>  MAINTAINERS                                   |   2 +
>>>>>  drivers/soc/Kconfig                           |   1 +
>>>>>  drivers/soc/Makefile                          |   1 +
>>>>>  drivers/soc/visconti/Kconfig                  |   7 +
>>>>>  drivers/soc/visconti/Makefile                 |   8 +
>>>>>  drivers/soc/visconti/dnn/Makefile             |   6 +
>>>>>  drivers/soc/visconti/dnn/dnn.c                | 533
>>>> ++++++++++++++++++
>>>>>  drivers/soc/visconti/dnn/hwd_dnn.c            | 183 ++++++
>>>>>  drivers/soc/visconti/dnn/hwd_dnn.h            |  68 +++
>>>>>  drivers/soc/visconti/dnn/hwd_dnn_reg.h        | 228 ++++++++
>>>>>  drivers/soc/visconti/ipa_common.c             |  55 ++
>>>>>  drivers/soc/visconti/ipa_common.h             |  18 +
>>>>>  drivers/soc/visconti/uapi/dnn.h               |  77 +++
>>>>>  drivers/soc/visconti/uapi/ipa.h               |  88 +++
>>>>>  15 files changed, 1329 insertions(+)  create mode 100644
>>>>> Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.
>>>>> ya ml  create mode 100644 drivers/soc/visconti/Kconfig  create mode
>>>>> 100644 drivers/soc/visconti/Makefile  create mode 100644
>>>>> drivers/soc/visconti/dnn/Makefile  create mode 100644
>>>>> drivers/soc/visconti/dnn/dnn.c  create mode 100644
>>>>> drivers/soc/visconti/dnn/hwd_dnn.c
>>>>>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.h
>>>>>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn_reg.h
>>>>>  create mode 100644 drivers/soc/visconti/ipa_common.c  create mode
>>>>> 100644 drivers/soc/visconti/ipa_common.h  create mode 100644
>>>>> drivers/soc/visconti/uapi/dnn.h  create mode 100644
>>>>> drivers/soc/visconti/uapi/ipa.h
>>>>>


^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing accelerator driver
@ 2022-06-29 13:44           ` Hans Verkuil
  0 siblings, 0 replies; 36+ messages in thread
From: Hans Verkuil @ 2022-06-29 13:44 UTC (permalink / raw)
  To: yuji2.ishikawa, robh+dt, nobuhiro1.iwamatsu, sumit.semwal,
	christian.koenig
  Cc: linaro-mm-sig, dri-devel, linux-kernel, linux-arm-kernel, linux-media

My apologies for the late reply...

On 01/06/2022 03:40, yuji2.ishikawa@toshiba.co.jp wrote:
> Hi Hans,
> 
> Thank you for your advice.
> I prepared some description of DNN accelerator and its usage.
> 
> #### Handling memory blocks for Visconti5 accelerators
> 
> Visconti5 Image-Processing-Accelerators do not have fine grained IOMMU, as CPU have.
> Therefore, memory region to be passed to the accelerators should be physically contiguous.
> We use DMA-BUF backed by CMA (Contiguous Memory Allocator) to allocate memory regions for sharing between CPU/IPAs.
> Originally, in v4.19 based implementation, the ION allocator was used to allocate DMA-BUF instances.
> For the latest implementation, DMA-BUF HEAPS is used.
> 
> Two structure types are used to represent memory region passed to drivers.
> * struct drv_ipa_buffer_info
>   * to describe whole DMA-BUF instance
> * struct drv_ipa_addr
>   * to describe a memory region in a DMA-BUF instance
> 
> for details, see usage sample of each IPA driver
> 
> 
> #### Image Processing Accelerators overview
> 
> Visconti5 SoC has following image processing accererators
> 
> * AFFINE: 1 input image, 1 output image;                                             Affine transform, Homography transform, Polynomial lens distortion, LUT transform
> * DNN:    N input feature vector, N output feature vector;                           Deep neural network operation
> * PYRAMID 3 input image, 3 * N output image;                                         Resize grayscale/color image with N different parameters
> * DSPIF:  M input image, N output image;                                             Various opeations on images
> * HOX:    1 input image (multi ROI), 1 input dictionary1 likelihood/feature vector;  Extended Histogram of Oriented Gradient based pattern matching
> * HAMAT:  2 input feature vectors: 1 output corrdinate vector;                       Hamming distance matching for stereo vision
> * FLMAT:  3 input image, N input feature point, N output matched point;              Optical flow matching
> * SMLDB:  1 input image, N input feature point, N output feature vector;             Accelerated-KAZE feature descriptor accelerator
> * STMAT:  2 input image, 1 output disparity image;                                   Stereo disparity

It's not really easy to decide what is best. I would say that if both input and output
are images (RGB, YUV, Grayscale), then a V4L2 memory-to-memory driver is what I would
expect to see.

Where that is not the case, then a more custom approach makes sense.

In the list above I would put AFFINE, PYRAMID, DSPIF and possible STMAT in the V4L2
driver group, and the others more as custom drivers.

I think it also depends on how it is used: if a captured sensor image is
typically passed in for further processing, i.e. it is closely related to the
video ISP, then V4L2 is a reasonable choice.

A DNN driver, on the other hand, isn't using images at all, so for that something
like this driver makes sense.

Regards,

	Hans

> 
> see [0] Fig 7.2.1 for block diagram (of prototype chip)
> 
> 
> #### DNN accelerator overview
> 
> DNN accelerator is a proprietary CNN/DCNN processing accelerator developed by Toshiba.
> Visconti5 SoC has 2 instances of DNN acclerator hardware.
> Users convert existing Caffe/ONNX models to Visconti compatible models with an offline tool.
> A converted model "Configuration Binary" includes:
>   * instruction sequence for given network
>   * weight/bias information
>   * DMA configuration from/to global memory (for input/output feature)
> 
> DNN acccelerator can handle either 1 plane or multiple ROIs at a single call.
> 
> see [0] Fig 7.2.2 for block diagram of DNN accelerator
> 
> CNN: Convolutional Neural Network
> DCNN: Deep Convolutional Neural Network
> 
> 
> #### Input / Output
> 
> Input image or feature: base type is either of FP16, FP32, INT8, UINT8, INT16
> Output feature vector:  base type is either of FP16, FP32, INT8, UINT8, INT16
> 
> Input, Output, Weight, Bias can be placed on global memory and loaded/stored with DMA within DNN accelerator.
> These data on global memory can be specified as either of:
>   * single address to point single data block
>   * list of address to point multiple data blocks (i.e. ROIs)
> 
> DNN acclerator driver accepts an instance of "struct drv_dnn_descriptor" which includes addresses of input/output features and a configuration binary.
> 
> 
> #### Descriptor Builder at userland
> 
> Following APIs are provided to build a descriptor instance at userland.
> 
> /* defined in drv_dnn_util.h */
> int32_t drv_DNN_config_descript_init(struct drv_dnn_descriptor *desc, struct drv_ipa_buffer_info *buffer, int32_t buffer_num);
> int32_t drv_DNN_config_exec_configuration(struct drv_dnn_descriptor *desc, const void *configuration_binary,
>                                           struct drv_ipa_addr configuration_binary_addr, struct drv_ipa_addr *src_list,
>                                           struct drv_ipa_addr *dst_list, int32_t list_num, struct drv_ipa_addr temporary_addr,
>                                           int32_t temporary_size);
> int32_t drv_DNN_config_descript_finalize(struct drv_dnn_descriptor *desc);
> 
> struct drv_dnn_descriptor is defined in drivers/soc/visconti/uapi/dnn.h.
> I think this header should be placed anywhere else to be collected on "make headers_install" action of kernel building.
> 
> 
> #### Usage sample (without error handlers)
> 
>     #include <linux/dma-heap.h>
>     #include "drv_ipa.h"
>     #include "drv_dnn.h"
>     #include "drv_dnn_util.h" 
> 
>     int allocate_buffer(int fd_heap, int size) 
>     {
>         struct dma_heap_allocation_data heap_data_in={0};
>         int ret;
> 
>         heap_data_in.len = ROUNDUP_POW2(size);
>         heap_data_in.fd_flags = O_RDWR | O_CLOEXEC;
> 
>         ret = ioctl(fd_heap, DMA_HEAP_IOCTL_ALLOC, &heap_data_in);
>         if (ret <0)
>             return -1;
>         else
>             return heap_data_in.fd;
>     }
> 
>     void dnn_sample(int fd_dnn, int fd_conf, int fd_src, int fd_dst, int fd_temp)
>     {
>         int32_t ret;
>         struct drv_ipa_buffer_info bufinfo[4] = {
>             {.fd=fd_conf, .coherent=true, .direction=DRV_IPA_DIR_TO_DEVICE},
>             {.fd=fd_src,  .coherent=true, .direction=DRV_IPA_DIR_TO_DEVICE},
>             {.fd=fd_dst,  .coherent=true, .direction=DRV_IPA_DIR_FROM_DEVICE},
>             {.fd=fd_temp, .coherent=true, .direction=DRV_IPA_DIR_FROM_DEVICE},
>         };
>         struct drv_ipa_addr conf_addr = {.buffer_index=0, .offset=0};
>         struct drv_ipa_addr src_addr  = {.buffer_index=1, .offset=0};
>         struct drv_ipa_addr dst_addr  = {.buffer_index=2, .offset=0};
>         struct drv_ipa_addr temp_addr = {.buffer_index=3, .offset=0};
>         struct drv_dnn_descriptor desc;
> 
>         struct drv_ipa_addr src_list[] = {src_addr};
>         struct drv_ipa_addr dst_list[] = {dst_addr};
> 
>         uint8_t *config = (uint8_t*)mmap(NULL, DNN_CONF_BIN_SIZE, PROT_READ, MAP_SHARED, fd_conf, 0);
> 
>         drv_DNN_config_descript_init(&desc, bufinfo, 4);
>         drv_DNN_config_exec_configuration(&desc, config, conf_addr, src_list, dst_list, 1, temp_addr, TEMP_BUF_SIZE);
>         drv_DNN_config_descript_finalize(&desc);
> 
>         ioctl(fd_dnn, IOC_IPA_START, &desc);
> 
>         {
>             struct pollfd fds[] = {.fd=fd_dnn, .events=POLL_IN, .revents=0};
>             poll(fds, 1, 1000);
>         }
>     }
> 
>     void sample()
>     {
>         int fd_dnn, fd_heap, fd_conf, fd_src, fd_dst, fd_temp;
> 
>         fd_dnn = open("/dev/dnn0", O_RDWR);
>         fd_heap = open("/dev/dma_heap/linux,cma", O_RDWR);
>         fd_conf = allocate_buffer(fd_heap, DNN_CONF_BIN_ALLOC_SIZE);
>         fd_src  = allocate_buffer(fd_heap, INPUT_IMG_ALLOC_SIZE);
>         fd_dst  = allocate_buffer(fd_heap, OUTPUT_IMG_ALLOC_SIZE);
>         fd_temp = allocate_buffer(fd_heap, TEMP_BUF_ALLOC_SIZE);
> 
>         /* fill in input image and configuration here */
> 
>         dnn_sample(fd_dnn, fd_conf, fd_src, fd_dst, fd_temp);
> 
>         ...
>     };
> 
> 
> #### Reference
> 
> * [0] https://toshiba.semicon-storage.com/content/dam/toshiba-ss-v2/master/en/company/technical-review/pdf/technical-review-18_e.pdf
>   * Fig 7.2.1 shows the whole architecture of prototype chip
>   * Fig 7.2.2 shows the architecture of DNN accelerator
> 
> 
> Regards,
> Yuji
> 
>> -----Original Message-----
>> From: Hans Verkuil <hverkuil@xs4all.nl>
>> Sent: Friday, May 20, 2022 7:03 PM
>> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
>> <yuji2.ishikawa@toshiba.co.jp>; robh+dt@kernel.org; iwamatsu nobuhiro(岩松
>> 信洋 □ＳＷＣ◯ＡＣＴ) <nobuhiro1.iwamatsu@toshiba.co.jp>;
>> sumit.semwal@linaro.org; christian.koenig@amd.com
>> Cc: linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
>> linux-media@vger.kernel.org; dri-devel@lists.freedesktop.org;
>> linaro-mm-sig@lists.linaro.org
>> Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing
>> accelerator driver
>>
>> Hi Yuji,
>>
>> On 5/20/22 11:48, yuji2.ishikawa@toshiba.co.jp wrote:
>>> Hi Hans,
>>>
>>> Thank you for your comment.
>>> I agree that this submission lacks documents sharing basic idea of the
>> accelerators; what do they accept and what do they yield.
>>> Where can I put a new document? Can I put it as a comment in a source? Can
>> I add a file under Documentation/misc-devices directory?
>>
>> Start with explaining it by replying to this mail. Without knowing anything about
>> the hardware, it is difficult to say what the best place is. Usually it is either the
>> public API header, or somewhere in Documentation.
>>
>> The first step is to have a better understanding of the Visconti image hardware
>> and to see what the best subsystem would be to support that hardware.
>>
>> Regards,
>>
>> 	Hans
>>
>>>
>>> Thanks,
>>> Yuji Ishikawa
>>>
>>>> -----Original Message-----
>>>> From: Hans Verkuil <hverkuil@xs4all.nl>
>>>> Sent: Thursday, May 12, 2022 8:15 PM
>>>> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
>>>> <yuji2.ishikawa@toshiba.co.jp>; Rob Herring <robh+dt@kernel.org>;
>>>> iwamatsu nobuhiro(岩松 信洋 □ＳＷＣ◯ＡＣＴ)
>>>> <nobuhiro1.iwamatsu@toshiba.co.jp>; Sumit Semwal
>>>> <sumit.semwal@linaro.org>; Christian König
>> <christian.koenig@amd.com>
>>>> Cc: linux-arm-kernel@lists.infradead.org;
>>>> linux-kernel@vger.kernel.org; linux-media@vger.kernel.org;
>>>> dri-devel@lists.freedesktop.org; linaro-mm-sig@lists.linaro.org
>>>> Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing
>>>> accelerator driver
>>>>
>>>> Hi Yuji,
>>>>
>>>> On 4/28/22 15:11, Yuji Ishikawa wrote:
>>>>> This series is the DNN image processing accelerator driver for
>>>>> Toshiba's ARM
>>>> SoC, Visconti[0].
>>>>> This provides DT binding documentation, device driver, MAINTAINER
>> files.
>>>>>
>>>>> The second patch "soc: visconti: Add Toshiba Visconti image
>>>>> processing
>>>> accelerator common source"
>>>>> and the fourth patch "MAINTAINERS: ..." are the same as the ones in
>>>>> the
>>>> preceding post for affine driver.
>>>>
>>>> There appears to be no documentation whatsoever, unless I am missing
>>>> something.
>>>>
>>>> How is the uAPI supposed to be used? What does it do? What formats
>>>> does it accept or produce?
>>>>
>>>> If this processes images, then (as Laurent mentioned) this is more
>>>> suitable as a
>>>> V4L2 mem2mem driver.
>>>>
>>>> See
>>>> https://linuxtv.org/downloads/v4l-dvb-apis-new/userspace-api/v4l/dev-
>>>> me
>>>> m2mem.html
>>>> and the many drivers in drivers/media that use it (git grep
>> v4l2-mem2mem.h).
>>>>
>>>> But without any explanation whatsoever I have no idea what does or
>>>> does not make sense.
>>>>
>>>> Regards,
>>>>
>>>> 	Hans
>>>>
>>>>>
>>>>> Best regards,
>>>>> Yuji
>>>>>
>>>>> [0]:
>>>>>
>>>>
>> https://toshiba.semicon-storage.com/ap-en/semiconductor/product/image
>>>> -
>>>>> recognition-processors-visconti.html
>>>>>
>>>>> Yuji Ishikawa (4):
>>>>>   dt-bindings: soc: visconti: Add Toshiba Visconti DNN image processing
>>>>>     accelerator bindings
>>>>>   soc: visconti: Add Toshiba Visconti image processing accelerator
>>>>>     common source
>>>>>   soc: visconti: Add Toshiba Visconti DNN image processing accelerator
>>>>>   MAINTAINERS: Add entries for Toshiba Visconti DNN image processing
>>>>>     accelerator
>>>>>
>>>>>  .../soc/visconti/toshiba,visconti-dnn.yaml    |  54 ++
>>>>>  MAINTAINERS                                   |   2 +
>>>>>  drivers/soc/Kconfig                           |   1 +
>>>>>  drivers/soc/Makefile                          |   1 +
>>>>>  drivers/soc/visconti/Kconfig                  |   7 +
>>>>>  drivers/soc/visconti/Makefile                 |   8 +
>>>>>  drivers/soc/visconti/dnn/Makefile             |   6 +
>>>>>  drivers/soc/visconti/dnn/dnn.c                | 533
>>>> ++++++++++++++++++
>>>>>  drivers/soc/visconti/dnn/hwd_dnn.c            | 183 ++++++
>>>>>  drivers/soc/visconti/dnn/hwd_dnn.h            |  68 +++
>>>>>  drivers/soc/visconti/dnn/hwd_dnn_reg.h        | 228 ++++++++
>>>>>  drivers/soc/visconti/ipa_common.c             |  55 ++
>>>>>  drivers/soc/visconti/ipa_common.h             |  18 +
>>>>>  drivers/soc/visconti/uapi/dnn.h               |  77 +++
>>>>>  drivers/soc/visconti/uapi/ipa.h               |  88 +++
>>>>>  15 files changed, 1329 insertions(+)  create mode 100644
>>>>> Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.
>>>>> ya ml  create mode 100644 drivers/soc/visconti/Kconfig  create mode
>>>>> 100644 drivers/soc/visconti/Makefile  create mode 100644
>>>>> drivers/soc/visconti/dnn/Makefile  create mode 100644
>>>>> drivers/soc/visconti/dnn/dnn.c  create mode 100644
>>>>> drivers/soc/visconti/dnn/hwd_dnn.c
>>>>>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.h
>>>>>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn_reg.h
>>>>>  create mode 100644 drivers/soc/visconti/ipa_common.c  create mode
>>>>> 100644 drivers/soc/visconti/ipa_common.h  create mode 100644
>>>>> drivers/soc/visconti/uapi/dnn.h  create mode 100644
>>>>> drivers/soc/visconti/uapi/ipa.h
>>>>>


^ permalink raw reply	[flat|nested] 36+ messages in thread

* Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing accelerator driver
@ 2022-06-29 13:44           ` Hans Verkuil
  0 siblings, 0 replies; 36+ messages in thread
From: Hans Verkuil @ 2022-06-29 13:44 UTC (permalink / raw)
  To: yuji2.ishikawa, robh+dt, nobuhiro1.iwamatsu, sumit.semwal,
	christian.koenig
  Cc: linux-arm-kernel, linux-kernel, linux-media, dri-devel, linaro-mm-sig

My apologies for the late reply...

On 01/06/2022 03:40, yuji2.ishikawa@toshiba.co.jp wrote:
> Hi Hans,
> 
> Thank you for your advice.
> I prepared some description of DNN accelerator and its usage.
> 
> #### Handling memory blocks for Visconti5 accelerators
> 
> Visconti5 Image-Processing-Accelerators do not have fine grained IOMMU, as CPU have.
> Therefore, memory region to be passed to the accelerators should be physically contiguous.
> We use DMA-BUF backed by CMA (Contiguous Memory Allocator) to allocate memory regions for sharing between CPU/IPAs.
> Originally, in v4.19 based implementation, the ION allocator was used to allocate DMA-BUF instances.
> For the latest implementation, DMA-BUF HEAPS is used.
> 
> Two structure types are used to represent memory region passed to drivers.
> * struct drv_ipa_buffer_info
>   * to describe whole DMA-BUF instance
> * struct drv_ipa_addr
>   * to describe a memory region in a DMA-BUF instance
> 
> for details, see usage sample of each IPA driver
> 
> 
> #### Image Processing Accelerators overview
> 
> Visconti5 SoC has following image processing accererators
> 
> * AFFINE: 1 input image, 1 output image;                                             Affine transform, Homography transform, Polynomial lens distortion, LUT transform
> * DNN:    N input feature vector, N output feature vector;                           Deep neural network operation
> * PYRAMID 3 input image, 3 * N output image;                                         Resize grayscale/color image with N different parameters
> * DSPIF:  M input image, N output image;                                             Various opeations on images
> * HOX:    1 input image (multi ROI), 1 input dictionary1 likelihood/feature vector;  Extended Histogram of Oriented Gradient based pattern matching
> * HAMAT:  2 input feature vectors: 1 output corrdinate vector;                       Hamming distance matching for stereo vision
> * FLMAT:  3 input image, N input feature point, N output matched point;              Optical flow matching
> * SMLDB:  1 input image, N input feature point, N output feature vector;             Accelerated-KAZE feature descriptor accelerator
> * STMAT:  2 input image, 1 output disparity image;                                   Stereo disparity

It's not really easy to decide what is best. I would say that if both input and output
are images (RGB, YUV, Grayscale), then a V4L2 memory-to-memory driver is what I would
expect to see.

Where that is not the case, then a more custom approach makes sense.

In the list above I would put AFFINE, PYRAMID, DSPIF and possible STMAT in the V4L2
driver group, and the others more as custom drivers.

I think it also depends on how it is used: if a captured sensor image is
typically passed in for further processing, i.e. it is closely related to the
video ISP, then V4L2 is a reasonable choice.

A DNN driver, on the other hand, isn't using images at all, so for that something
like this driver makes sense.

Regards,

	Hans

> 
> see [0] Fig 7.2.1 for block diagram (of prototype chip)
> 
> 
> #### DNN accelerator overview
> 
> DNN accelerator is a proprietary CNN/DCNN processing accelerator developed by Toshiba.
> Visconti5 SoC has 2 instances of DNN acclerator hardware.
> Users convert existing Caffe/ONNX models to Visconti compatible models with an offline tool.
> A converted model "Configuration Binary" includes:
>   * instruction sequence for given network
>   * weight/bias information
>   * DMA configuration from/to global memory (for input/output feature)
> 
> DNN acccelerator can handle either 1 plane or multiple ROIs at a single call.
> 
> see [0] Fig 7.2.2 for block diagram of DNN accelerator
> 
> CNN: Convolutional Neural Network
> DCNN: Deep Convolutional Neural Network
> 
> 
> #### Input / Output
> 
> Input image or feature: base type is either of FP16, FP32, INT8, UINT8, INT16
> Output feature vector:  base type is either of FP16, FP32, INT8, UINT8, INT16
> 
> Input, Output, Weight, Bias can be placed on global memory and loaded/stored with DMA within DNN accelerator.
> These data on global memory can be specified as either of:
>   * single address to point single data block
>   * list of address to point multiple data blocks (i.e. ROIs)
> 
> DNN acclerator driver accepts an instance of "struct drv_dnn_descriptor" which includes addresses of input/output features and a configuration binary.
> 
> 
> #### Descriptor Builder at userland
> 
> Following APIs are provided to build a descriptor instance at userland.
> 
> /* defined in drv_dnn_util.h */
> int32_t drv_DNN_config_descript_init(struct drv_dnn_descriptor *desc, struct drv_ipa_buffer_info *buffer, int32_t buffer_num);
> int32_t drv_DNN_config_exec_configuration(struct drv_dnn_descriptor *desc, const void *configuration_binary,
>                                           struct drv_ipa_addr configuration_binary_addr, struct drv_ipa_addr *src_list,
>                                           struct drv_ipa_addr *dst_list, int32_t list_num, struct drv_ipa_addr temporary_addr,
>                                           int32_t temporary_size);
> int32_t drv_DNN_config_descript_finalize(struct drv_dnn_descriptor *desc);
> 
> struct drv_dnn_descriptor is defined in drivers/soc/visconti/uapi/dnn.h.
> I think this header should be placed anywhere else to be collected on "make headers_install" action of kernel building.
> 
> 
> #### Usage sample (without error handlers)
> 
>     #include <linux/dma-heap.h>
>     #include "drv_ipa.h"
>     #include "drv_dnn.h"
>     #include "drv_dnn_util.h" 
> 
>     int allocate_buffer(int fd_heap, int size) 
>     {
>         struct dma_heap_allocation_data heap_data_in={0};
>         int ret;
> 
>         heap_data_in.len = ROUNDUP_POW2(size);
>         heap_data_in.fd_flags = O_RDWR | O_CLOEXEC;
> 
>         ret = ioctl(fd_heap, DMA_HEAP_IOCTL_ALLOC, &heap_data_in);
>         if (ret <0)
>             return -1;
>         else
>             return heap_data_in.fd;
>     }
> 
>     void dnn_sample(int fd_dnn, int fd_conf, int fd_src, int fd_dst, int fd_temp)
>     {
>         int32_t ret;
>         struct drv_ipa_buffer_info bufinfo[4] = {
>             {.fd=fd_conf, .coherent=true, .direction=DRV_IPA_DIR_TO_DEVICE},
>             {.fd=fd_src,  .coherent=true, .direction=DRV_IPA_DIR_TO_DEVICE},
>             {.fd=fd_dst,  .coherent=true, .direction=DRV_IPA_DIR_FROM_DEVICE},
>             {.fd=fd_temp, .coherent=true, .direction=DRV_IPA_DIR_FROM_DEVICE},
>         };
>         struct drv_ipa_addr conf_addr = {.buffer_index=0, .offset=0};
>         struct drv_ipa_addr src_addr  = {.buffer_index=1, .offset=0};
>         struct drv_ipa_addr dst_addr  = {.buffer_index=2, .offset=0};
>         struct drv_ipa_addr temp_addr = {.buffer_index=3, .offset=0};
>         struct drv_dnn_descriptor desc;
> 
>         struct drv_ipa_addr src_list[] = {src_addr};
>         struct drv_ipa_addr dst_list[] = {dst_addr};
> 
>         uint8_t *config = (uint8_t*)mmap(NULL, DNN_CONF_BIN_SIZE, PROT_READ, MAP_SHARED, fd_conf, 0);
> 
>         drv_DNN_config_descript_init(&desc, bufinfo, 4);
>         drv_DNN_config_exec_configuration(&desc, config, conf_addr, src_list, dst_list, 1, temp_addr, TEMP_BUF_SIZE);
>         drv_DNN_config_descript_finalize(&desc);
> 
>         ioctl(fd_dnn, IOC_IPA_START, &desc);
> 
>         {
>             struct pollfd fds[] = {.fd=fd_dnn, .events=POLL_IN, .revents=0};
>             poll(fds, 1, 1000);
>         }
>     }
> 
>     void sample()
>     {
>         int fd_dnn, fd_heap, fd_conf, fd_src, fd_dst, fd_temp;
> 
>         fd_dnn = open("/dev/dnn0", O_RDWR);
>         fd_heap = open("/dev/dma_heap/linux,cma", O_RDWR);
>         fd_conf = allocate_buffer(fd_heap, DNN_CONF_BIN_ALLOC_SIZE);
>         fd_src  = allocate_buffer(fd_heap, INPUT_IMG_ALLOC_SIZE);
>         fd_dst  = allocate_buffer(fd_heap, OUTPUT_IMG_ALLOC_SIZE);
>         fd_temp = allocate_buffer(fd_heap, TEMP_BUF_ALLOC_SIZE);
> 
>         /* fill in input image and configuration here */
> 
>         dnn_sample(fd_dnn, fd_conf, fd_src, fd_dst, fd_temp);
> 
>         ...
>     };
> 
> 
> #### Reference
> 
> * [0] https://toshiba.semicon-storage.com/content/dam/toshiba-ss-v2/master/en/company/technical-review/pdf/technical-review-18_e.pdf
>   * Fig 7.2.1 shows the whole architecture of prototype chip
>   * Fig 7.2.2 shows the architecture of DNN accelerator
> 
> 
> Regards,
> Yuji
> 
>> -----Original Message-----
>> From: Hans Verkuil <hverkuil@xs4all.nl>
>> Sent: Friday, May 20, 2022 7:03 PM
>> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
>> <yuji2.ishikawa@toshiba.co.jp>; robh+dt@kernel.org; iwamatsu nobuhiro(岩松
>> 信洋 □ＳＷＣ◯ＡＣＴ) <nobuhiro1.iwamatsu@toshiba.co.jp>;
>> sumit.semwal@linaro.org; christian.koenig@amd.com
>> Cc: linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
>> linux-media@vger.kernel.org; dri-devel@lists.freedesktop.org;
>> linaro-mm-sig@lists.linaro.org
>> Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing
>> accelerator driver
>>
>> Hi Yuji,
>>
>> On 5/20/22 11:48, yuji2.ishikawa@toshiba.co.jp wrote:
>>> Hi Hans,
>>>
>>> Thank you for your comment.
>>> I agree that this submission lacks documents sharing basic idea of the
>> accelerators; what do they accept and what do they yield.
>>> Where can I put a new document? Can I put it as a comment in a source? Can
>> I add a file under Documentation/misc-devices directory?
>>
>> Start with explaining it by replying to this mail. Without knowing anything about
>> the hardware, it is difficult to say what the best place is. Usually it is either the
>> public API header, or somewhere in Documentation.
>>
>> The first step is to have a better understanding of the Visconti image hardware
>> and to see what the best subsystem would be to support that hardware.
>>
>> Regards,
>>
>> 	Hans
>>
>>>
>>> Thanks,
>>> Yuji Ishikawa
>>>
>>>> -----Original Message-----
>>>> From: Hans Verkuil <hverkuil@xs4all.nl>
>>>> Sent: Thursday, May 12, 2022 8:15 PM
>>>> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
>>>> <yuji2.ishikawa@toshiba.co.jp>; Rob Herring <robh+dt@kernel.org>;
>>>> iwamatsu nobuhiro(岩松 信洋 □ＳＷＣ◯ＡＣＴ)
>>>> <nobuhiro1.iwamatsu@toshiba.co.jp>; Sumit Semwal
>>>> <sumit.semwal@linaro.org>; Christian König
>> <christian.koenig@amd.com>
>>>> Cc: linux-arm-kernel@lists.infradead.org;
>>>> linux-kernel@vger.kernel.org; linux-media@vger.kernel.org;
>>>> dri-devel@lists.freedesktop.org; linaro-mm-sig@lists.linaro.org
>>>> Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing
>>>> accelerator driver
>>>>
>>>> Hi Yuji,
>>>>
>>>> On 4/28/22 15:11, Yuji Ishikawa wrote:
>>>>> This series is the DNN image processing accelerator driver for
>>>>> Toshiba's ARM
>>>> SoC, Visconti[0].
>>>>> This provides DT binding documentation, device driver, MAINTAINER
>> files.
>>>>>
>>>>> The second patch "soc: visconti: Add Toshiba Visconti image
>>>>> processing
>>>> accelerator common source"
>>>>> and the fourth patch "MAINTAINERS: ..." are the same as the ones in
>>>>> the
>>>> preceding post for affine driver.
>>>>
>>>> There appears to be no documentation whatsoever, unless I am missing
>>>> something.
>>>>
>>>> How is the uAPI supposed to be used? What does it do? What formats
>>>> does it accept or produce?
>>>>
>>>> If this processes images, then (as Laurent mentioned) this is more
>>>> suitable as a
>>>> V4L2 mem2mem driver.
>>>>
>>>> See
>>>> https://linuxtv.org/downloads/v4l-dvb-apis-new/userspace-api/v4l/dev-
>>>> me
>>>> m2mem.html
>>>> and the many drivers in drivers/media that use it (git grep
>> v4l2-mem2mem.h).
>>>>
>>>> But without any explanation whatsoever I have no idea what does or
>>>> does not make sense.
>>>>
>>>> Regards,
>>>>
>>>> 	Hans
>>>>
>>>>>
>>>>> Best regards,
>>>>> Yuji
>>>>>
>>>>> [0]:
>>>>>
>>>>
>> https://toshiba.semicon-storage.com/ap-en/semiconductor/product/image
>>>> -
>>>>> recognition-processors-visconti.html
>>>>>
>>>>> Yuji Ishikawa (4):
>>>>>   dt-bindings: soc: visconti: Add Toshiba Visconti DNN image processing
>>>>>     accelerator bindings
>>>>>   soc: visconti: Add Toshiba Visconti image processing accelerator
>>>>>     common source
>>>>>   soc: visconti: Add Toshiba Visconti DNN image processing accelerator
>>>>>   MAINTAINERS: Add entries for Toshiba Visconti DNN image processing
>>>>>     accelerator
>>>>>
>>>>>  .../soc/visconti/toshiba,visconti-dnn.yaml    |  54 ++
>>>>>  MAINTAINERS                                   |   2 +
>>>>>  drivers/soc/Kconfig                           |   1 +
>>>>>  drivers/soc/Makefile                          |   1 +
>>>>>  drivers/soc/visconti/Kconfig                  |   7 +
>>>>>  drivers/soc/visconti/Makefile                 |   8 +
>>>>>  drivers/soc/visconti/dnn/Makefile             |   6 +
>>>>>  drivers/soc/visconti/dnn/dnn.c                | 533
>>>> ++++++++++++++++++
>>>>>  drivers/soc/visconti/dnn/hwd_dnn.c            | 183 ++++++
>>>>>  drivers/soc/visconti/dnn/hwd_dnn.h            |  68 +++
>>>>>  drivers/soc/visconti/dnn/hwd_dnn_reg.h        | 228 ++++++++
>>>>>  drivers/soc/visconti/ipa_common.c             |  55 ++
>>>>>  drivers/soc/visconti/ipa_common.h             |  18 +
>>>>>  drivers/soc/visconti/uapi/dnn.h               |  77 +++
>>>>>  drivers/soc/visconti/uapi/ipa.h               |  88 +++
>>>>>  15 files changed, 1329 insertions(+)  create mode 100644
>>>>> Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.
>>>>> ya ml  create mode 100644 drivers/soc/visconti/Kconfig  create mode
>>>>> 100644 drivers/soc/visconti/Makefile  create mode 100644
>>>>> drivers/soc/visconti/dnn/Makefile  create mode 100644
>>>>> drivers/soc/visconti/dnn/dnn.c  create mode 100644
>>>>> drivers/soc/visconti/dnn/hwd_dnn.c
>>>>>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.h
>>>>>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn_reg.h
>>>>>  create mode 100644 drivers/soc/visconti/ipa_common.c  create mode
>>>>> 100644 drivers/soc/visconti/ipa_common.h  create mode 100644
>>>>> drivers/soc/visconti/uapi/dnn.h  create mode 100644
>>>>> drivers/soc/visconti/uapi/ipa.h
>>>>>


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 36+ messages in thread

* RE: [PATCH 0/4] Add Toshiba Visconti DNN image processing accelerator driver
  2022-06-29 13:44           ` Hans Verkuil
  (?)
@ 2022-07-05  1:17             ` yuji2.ishikawa
  -1 siblings, 0 replies; 36+ messages in thread
From: yuji2.ishikawa @ 2022-07-05  1:17 UTC (permalink / raw)
  To: hverkuil, robh+dt, nobuhiro1.iwamatsu, sumit.semwal, christian.koenig
  Cc: linux-arm-kernel, linux-kernel, linux-media, dri-devel, linaro-mm-sig

Hi Hans,

Thank you for your advice.
I understand that V4L2 M2M driver is recommended for a group including Affine and Pyramid.

As for DSPIF, our application SW engineer said that there is another version of firmware to handle neural network.
Therefore, DSP can handle not only images, but also some array/list typed data.
It would be better to handle DSPIF as a misc device as well as DNN.

It is still difficult for me to imagine a whole structure of M2M type driver and corresponding userland application.
What do they look like? Is there any existing driver suitable for reference?

Let me think about a Pyramid HW which receives a planar (R/G/B as different planes, not in interleaved RGBRGB format) image, and yields 3 planar images.
Is it covered by only 1 fd, or multiple fds are required?
* A fd for Pyramid driver:
  * OUTPUT queue for receiving a picture?
    * OUTPUT or OUTPUT_MPLANE?
    * Q: Typically, RGB image is handled with single plane buffer in V4L2. RGB images do not have fourcc for multi-planar format (while YUV images do).
        * How should I explicitly request R/G/B planar buffer in V4L2 semantics?
  * CAPTURE queue for yielding a picture?
    * CAPTURE or CAPTURE_MPLANE?
    * Again: RGB interleaved vs R/G/B planar 
    * Q: If I want to capture multiple images (with different resolution) at a time, how should I do?
        * Do I have to add other fds for 2nd, 3rd CAPTURE queue?
        * Or, multiple images can be packed in the same CAPTURE buffer?
        * Or, multiple images can be placed in CAPTURE_MPLANE buffer ?
  * Compound control to receive a configuration.

Regards,
		Yuji

> -----Original Message-----
> From: Hans Verkuil <hverkuil@xs4all.nl>
> Sent: Wednesday, June 29, 2022 10:44 PM
> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> <yuji2.ishikawa@toshiba.co.jp>; robh+dt@kernel.org; iwamatsu nobuhiro(岩松
> 信洋 □ＳＷＣ◯ＡＣＴ) <nobuhiro1.iwamatsu@toshiba.co.jp>;
> sumit.semwal@linaro.org; christian.koenig@amd.com
> Cc: linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
> linux-media@vger.kernel.org; dri-devel@lists.freedesktop.org;
> linaro-mm-sig@lists.linaro.org
> Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing
> accelerator driver
> 
> My apologies for the late reply...
> 
> On 01/06/2022 03:40, yuji2.ishikawa@toshiba.co.jp wrote:
> > Hi Hans,
> >
> > Thank you for your advice.
> > I prepared some description of DNN accelerator and its usage.
> >
> > #### Handling memory blocks for Visconti5 accelerators
> >
> > Visconti5 Image-Processing-Accelerators do not have fine grained IOMMU,
> as CPU have.
> > Therefore, memory region to be passed to the accelerators should be
> physically contiguous.
> > We use DMA-BUF backed by CMA (Contiguous Memory Allocator) to allocate
> memory regions for sharing between CPU/IPAs.
> > Originally, in v4.19 based implementation, the ION allocator was used to
> allocate DMA-BUF instances.
> > For the latest implementation, DMA-BUF HEAPS is used.
> >
> > Two structure types are used to represent memory region passed to drivers.
> > * struct drv_ipa_buffer_info
> >   * to describe whole DMA-BUF instance
> > * struct drv_ipa_addr
> >   * to describe a memory region in a DMA-BUF instance
> >
> > for details, see usage sample of each IPA driver
> >
> >
> > #### Image Processing Accelerators overview
> >
> > Visconti5 SoC has following image processing accererators
> >
> > * AFFINE: 1 input image, 1 output image;
> Affine transform, Homography transform, Polynomial lens distortion, LUT
> transform
> > * DNN:    N input feature vector, N output feature vector;
> Deep neural network operation
> > * PYRAMID 3 input image, 3 * N output image;
> Resize grayscale/color image with N different parameters
> > * DSPIF:  M input image, N output image;
> Various opeations on images
> > * HOX:    1 input image (multi ROI), 1 input dictionary1 likelihood/feature
> vector;  Extended Histogram of Oriented Gradient based pattern matching
> > * HAMAT:  2 input feature vectors: 1 output corrdinate vector;
> Hamming distance matching for stereo vision
> > * FLMAT:  3 input image, N input feature point, N output matched point;
> Optical flow matching
> > * SMLDB:  1 input image, N input feature point, N output feature vector;
> Accelerated-KAZE feature descriptor accelerator
> > * STMAT:  2 input image, 1 output disparity image;
> Stereo disparity
> 
> It's not really easy to decide what is best. I would say that if both input and
> output are images (RGB, YUV, Grayscale), then a V4L2 memory-to-memory
> driver is what I would expect to see.
> 
> Where that is not the case, then a more custom approach makes sense.
> 
> In the list above I would put AFFINE, PYRAMID, DSPIF and possible STMAT in
> the V4L2 driver group, and the others more as custom drivers.
> 
> I think it also depends on how it is used: if a captured sensor image is typically
> passed in for further processing, i.e. it is closely related to the video ISP, then
> V4L2 is a reasonable choice.
> 
> A DNN driver, on the other hand, isn't using images at all, so for that something
> like this driver makes sense.
> 
> Regards,
> 
> 	Hans
> 
> >
> > see [0] Fig 7.2.1 for block diagram (of prototype chip)
> >
> >
> > #### DNN accelerator overview
> >
> > DNN accelerator is a proprietary CNN/DCNN processing accelerator
> developed by Toshiba.
> > Visconti5 SoC has 2 instances of DNN acclerator hardware.
> > Users convert existing Caffe/ONNX models to Visconti compatible models
> with an offline tool.
> > A converted model "Configuration Binary" includes:
> >   * instruction sequence for given network
> >   * weight/bias information
> >   * DMA configuration from/to global memory (for input/output feature)
> >
> > DNN acccelerator can handle either 1 plane or multiple ROIs at a single call.
> >
> > see [0] Fig 7.2.2 for block diagram of DNN accelerator
> >
> > CNN: Convolutional Neural Network
> > DCNN: Deep Convolutional Neural Network
> >
> >
> > #### Input / Output
> >
> > Input image or feature: base type is either of FP16, FP32, INT8,
> > UINT8, INT16 Output feature vector:  base type is either of FP16,
> > FP32, INT8, UINT8, INT16
> >
> > Input, Output, Weight, Bias can be placed on global memory and
> loaded/stored with DMA within DNN accelerator.
> > These data on global memory can be specified as either of:
> >   * single address to point single data block
> >   * list of address to point multiple data blocks (i.e. ROIs)
> >
> > DNN acclerator driver accepts an instance of "struct drv_dnn_descriptor"
> which includes addresses of input/output features and a configuration binary.
> >
> >
> > #### Descriptor Builder at userland
> >
> > Following APIs are provided to build a descriptor instance at userland.
> >
> > /* defined in drv_dnn_util.h */
> > int32_t drv_DNN_config_descript_init(struct drv_dnn_descriptor *desc,
> > struct drv_ipa_buffer_info *buffer, int32_t buffer_num); int32_t
> drv_DNN_config_exec_configuration(struct drv_dnn_descriptor *desc, const
> void *configuration_binary,
> >                                           struct drv_ipa_addr
> configuration_binary_addr, struct drv_ipa_addr *src_list,
> >                                           struct drv_ipa_addr *dst_list,
> int32_t list_num, struct drv_ipa_addr temporary_addr,
> >                                           int32_t temporary_size);
> > int32_t drv_DNN_config_descript_finalize(struct drv_dnn_descriptor
> > *desc);
> >
> > struct drv_dnn_descriptor is defined in drivers/soc/visconti/uapi/dnn.h.
> > I think this header should be placed anywhere else to be collected on "make
> headers_install" action of kernel building.
> >
> >
> > #### Usage sample (without error handlers)
> >
> >     #include <linux/dma-heap.h>
> >     #include "drv_ipa.h"
> >     #include "drv_dnn.h"
> >     #include "drv_dnn_util.h"
> >
> >     int allocate_buffer(int fd_heap, int size)
> >     {
> >         struct dma_heap_allocation_data heap_data_in={0};
> >         int ret;
> >
> >         heap_data_in.len = ROUNDUP_POW2(size);
> >         heap_data_in.fd_flags = O_RDWR | O_CLOEXEC;
> >
> >         ret = ioctl(fd_heap, DMA_HEAP_IOCTL_ALLOC, &heap_data_in);
> >         if (ret <0)
> >             return -1;
> >         else
> >             return heap_data_in.fd;
> >     }
> >
> >     void dnn_sample(int fd_dnn, int fd_conf, int fd_src, int fd_dst, int
> fd_temp)
> >     {
> >         int32_t ret;
> >         struct drv_ipa_buffer_info bufinfo[4] = {
> >
> {.fd=fd_conf, .coherent=true, .direction=DRV_IPA_DIR_TO_DEVICE},
> >
> {.fd=fd_src,  .coherent=true, .direction=DRV_IPA_DIR_TO_DEVICE},
> >
> {.fd=fd_dst,  .coherent=true, .direction=DRV_IPA_DIR_FROM_DEVICE},
> >
> {.fd=fd_temp, .coherent=true, .direction=DRV_IPA_DIR_FROM_DEVICE},
> >         };
> >         struct drv_ipa_addr conf_addr = {.buffer_index=0, .offset=0};
> >         struct drv_ipa_addr src_addr  = {.buffer_index=1, .offset=0};
> >         struct drv_ipa_addr dst_addr  = {.buffer_index=2, .offset=0};
> >         struct drv_ipa_addr temp_addr = {.buffer_index=3, .offset=0};
> >         struct drv_dnn_descriptor desc;
> >
> >         struct drv_ipa_addr src_list[] = {src_addr};
> >         struct drv_ipa_addr dst_list[] = {dst_addr};
> >
> >         uint8_t *config = (uint8_t*)mmap(NULL, DNN_CONF_BIN_SIZE,
> > PROT_READ, MAP_SHARED, fd_conf, 0);
> >
> >         drv_DNN_config_descript_init(&desc, bufinfo, 4);
> >         drv_DNN_config_exec_configuration(&desc, config, conf_addr,
> src_list, dst_list, 1, temp_addr, TEMP_BUF_SIZE);
> >         drv_DNN_config_descript_finalize(&desc);
> >
> >         ioctl(fd_dnn, IOC_IPA_START, &desc);
> >
> >         {
> >             struct pollfd fds[] =
> {.fd=fd_dnn, .events=POLL_IN, .revents=0};
> >             poll(fds, 1, 1000);
> >         }
> >     }
> >
> >     void sample()
> >     {
> >         int fd_dnn, fd_heap, fd_conf, fd_src, fd_dst, fd_temp;
> >
> >         fd_dnn = open("/dev/dnn0", O_RDWR);
> >         fd_heap = open("/dev/dma_heap/linux,cma", O_RDWR);
> >         fd_conf = allocate_buffer(fd_heap, DNN_CONF_BIN_ALLOC_SIZE);
> >         fd_src  = allocate_buffer(fd_heap, INPUT_IMG_ALLOC_SIZE);
> >         fd_dst  = allocate_buffer(fd_heap, OUTPUT_IMG_ALLOC_SIZE);
> >         fd_temp = allocate_buffer(fd_heap, TEMP_BUF_ALLOC_SIZE);
> >
> >         /* fill in input image and configuration here */
> >
> >         dnn_sample(fd_dnn, fd_conf, fd_src, fd_dst, fd_temp);
> >
> >         ...
> >     };
> >
> >
> > #### Reference
> >
> > * [0]
> https://toshiba.semicon-storage.com/content/dam/toshiba-ss-v2/master/en
> /company/technical-review/pdf/technical-review-18_e.pdf
> >   * Fig 7.2.1 shows the whole architecture of prototype chip
> >   * Fig 7.2.2 shows the architecture of DNN accelerator
> >
> >
> > Regards,
> > Yuji
> >
> >> -----Original Message-----
> >> From: Hans Verkuil <hverkuil@xs4all.nl>
> >> Sent: Friday, May 20, 2022 7:03 PM
> >> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> >> <yuji2.ishikawa@toshiba.co.jp>; robh+dt@kernel.org; iwamatsu
> >> nobuhiro(岩松
> >> 信洋 □ＳＷＣ◯ＡＣＴ) <nobuhiro1.iwamatsu@toshiba.co.jp>;
> >> sumit.semwal@linaro.org; christian.koenig@amd.com
> >> Cc: linux-arm-kernel@lists.infradead.org;
> >> linux-kernel@vger.kernel.org; linux-media@vger.kernel.org;
> >> dri-devel@lists.freedesktop.org; linaro-mm-sig@lists.linaro.org
> >> Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing
> >> accelerator driver
> >>
> >> Hi Yuji,
> >>
> >> On 5/20/22 11:48, yuji2.ishikawa@toshiba.co.jp wrote:
> >>> Hi Hans,
> >>>
> >>> Thank you for your comment.
> >>> I agree that this submission lacks documents sharing basic idea of
> >>> the
> >> accelerators; what do they accept and what do they yield.
> >>> Where can I put a new document? Can I put it as a comment in a
> >>> source? Can
> >> I add a file under Documentation/misc-devices directory?
> >>
> >> Start with explaining it by replying to this mail. Without knowing
> >> anything about the hardware, it is difficult to say what the best
> >> place is. Usually it is either the public API header, or somewhere in
> Documentation.
> >>
> >> The first step is to have a better understanding of the Visconti
> >> image hardware and to see what the best subsystem would be to support
> that hardware.
> >>
> >> Regards,
> >>
> >> 	Hans
> >>
> >>>
> >>> Thanks,
> >>> Yuji Ishikawa
> >>>
> >>>> -----Original Message-----
> >>>> From: Hans Verkuil <hverkuil@xs4all.nl>
> >>>> Sent: Thursday, May 12, 2022 8:15 PM
> >>>> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> >>>> <yuji2.ishikawa@toshiba.co.jp>; Rob Herring <robh+dt@kernel.org>;
> >>>> iwamatsu nobuhiro(岩松 信洋 □ＳＷＣ◯ＡＣＴ)
> >>>> <nobuhiro1.iwamatsu@toshiba.co.jp>; Sumit Semwal
> >>>> <sumit.semwal@linaro.org>; Christian König
> >> <christian.koenig@amd.com>
> >>>> Cc: linux-arm-kernel@lists.infradead.org;
> >>>> linux-kernel@vger.kernel.org; linux-media@vger.kernel.org;
> >>>> dri-devel@lists.freedesktop.org; linaro-mm-sig@lists.linaro.org
> >>>> Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing
> >>>> accelerator driver
> >>>>
> >>>> Hi Yuji,
> >>>>
> >>>> On 4/28/22 15:11, Yuji Ishikawa wrote:
> >>>>> This series is the DNN image processing accelerator driver for
> >>>>> Toshiba's ARM
> >>>> SoC, Visconti[0].
> >>>>> This provides DT binding documentation, device driver, MAINTAINER
> >> files.
> >>>>>
> >>>>> The second patch "soc: visconti: Add Toshiba Visconti image
> >>>>> processing
> >>>> accelerator common source"
> >>>>> and the fourth patch "MAINTAINERS: ..." are the same as the ones
> >>>>> in the
> >>>> preceding post for affine driver.
> >>>>
> >>>> There appears to be no documentation whatsoever, unless I am
> >>>> missing something.
> >>>>
> >>>> How is the uAPI supposed to be used? What does it do? What formats
> >>>> does it accept or produce?
> >>>>
> >>>> If this processes images, then (as Laurent mentioned) this is more
> >>>> suitable as a
> >>>> V4L2 mem2mem driver.
> >>>>
> >>>> See
> >>>> https://linuxtv.org/downloads/v4l-dvb-apis-new/userspace-api/v4l/de
> >>>> v-
> >>>> me
> >>>> m2mem.html
> >>>> and the many drivers in drivers/media that use it (git grep
> >> v4l2-mem2mem.h).
> >>>>
> >>>> But without any explanation whatsoever I have no idea what does or
> >>>> does not make sense.
> >>>>
> >>>> Regards,
> >>>>
> >>>> 	Hans
> >>>>
> >>>>>
> >>>>> Best regards,
> >>>>> Yuji
> >>>>>
> >>>>> [0]:
> >>>>>
> >>>>
> >>
> https://toshiba.semicon-storage.com/ap-en/semiconductor/product/image
> >>>> -
> >>>>> recognition-processors-visconti.html
> >>>>>
> >>>>> Yuji Ishikawa (4):
> >>>>>   dt-bindings: soc: visconti: Add Toshiba Visconti DNN image
> processing
> >>>>>     accelerator bindings
> >>>>>   soc: visconti: Add Toshiba Visconti image processing accelerator
> >>>>>     common source
> >>>>>   soc: visconti: Add Toshiba Visconti DNN image processing
> accelerator
> >>>>>   MAINTAINERS: Add entries for Toshiba Visconti DNN image
> processing
> >>>>>     accelerator
> >>>>>
> >>>>>  .../soc/visconti/toshiba,visconti-dnn.yaml    |  54 ++
> >>>>>  MAINTAINERS                                   |   2 +
> >>>>>  drivers/soc/Kconfig                           |   1 +
> >>>>>  drivers/soc/Makefile                          |   1 +
> >>>>>  drivers/soc/visconti/Kconfig                  |   7 +
> >>>>>  drivers/soc/visconti/Makefile                 |   8 +
> >>>>>  drivers/soc/visconti/dnn/Makefile             |   6 +
> >>>>>  drivers/soc/visconti/dnn/dnn.c                | 533
> >>>> ++++++++++++++++++
> >>>>>  drivers/soc/visconti/dnn/hwd_dnn.c            | 183 ++++++
> >>>>>  drivers/soc/visconti/dnn/hwd_dnn.h            |  68 +++
> >>>>>  drivers/soc/visconti/dnn/hwd_dnn_reg.h        | 228 ++++++++
> >>>>>  drivers/soc/visconti/ipa_common.c             |  55 ++
> >>>>>  drivers/soc/visconti/ipa_common.h             |  18 +
> >>>>>  drivers/soc/visconti/uapi/dnn.h               |  77 +++
> >>>>>  drivers/soc/visconti/uapi/ipa.h               |  88 +++
> >>>>>  15 files changed, 1329 insertions(+)  create mode 100644
> >>>>>
> Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.
> >>>>> ya ml  create mode 100644 drivers/soc/visconti/Kconfig  create
> >>>>> mode
> >>>>> 100644 drivers/soc/visconti/Makefile  create mode 100644
> >>>>> drivers/soc/visconti/dnn/Makefile  create mode 100644
> >>>>> drivers/soc/visconti/dnn/dnn.c  create mode 100644
> >>>>> drivers/soc/visconti/dnn/hwd_dnn.c
> >>>>>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.h
> >>>>>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn_reg.h
> >>>>>  create mode 100644 drivers/soc/visconti/ipa_common.c  create
> mode
> >>>>> 100644 drivers/soc/visconti/ipa_common.h  create mode 100644
> >>>>> drivers/soc/visconti/uapi/dnn.h  create mode 100644
> >>>>> drivers/soc/visconti/uapi/ipa.h
> >>>>>

^ permalink raw reply	[flat|nested] 36+ messages in thread

* RE: [PATCH 0/4] Add Toshiba Visconti DNN image processing accelerator driver
@ 2022-07-05  1:17             ` yuji2.ishikawa
  0 siblings, 0 replies; 36+ messages in thread
From: yuji2.ishikawa @ 2022-07-05  1:17 UTC (permalink / raw)
  To: hverkuil, robh+dt, nobuhiro1.iwamatsu, sumit.semwal, christian.koenig
  Cc: linux-arm-kernel, linux-kernel, linux-media, dri-devel, linaro-mm-sig

Hi Hans,

Thank you for your advice.
I understand that V4L2 M2M driver is recommended for a group including Affine and Pyramid.

As for DSPIF, our application SW engineer said that there is another version of firmware to handle neural network.
Therefore, DSP can handle not only images, but also some array/list typed data.
It would be better to handle DSPIF as a misc device as well as DNN.

It is still difficult for me to imagine a whole structure of M2M type driver and corresponding userland application.
What do they look like? Is there any existing driver suitable for reference?

Let me think about a Pyramid HW which receives a planar (R/G/B as different planes, not in interleaved RGBRGB format) image, and yields 3 planar images.
Is it covered by only 1 fd, or multiple fds are required?
* A fd for Pyramid driver:
  * OUTPUT queue for receiving a picture?
    * OUTPUT or OUTPUT_MPLANE?
    * Q: Typically, RGB image is handled with single plane buffer in V4L2. RGB images do not have fourcc for multi-planar format (while YUV images do).
        * How should I explicitly request R/G/B planar buffer in V4L2 semantics?
  * CAPTURE queue for yielding a picture?
    * CAPTURE or CAPTURE_MPLANE?
    * Again: RGB interleaved vs R/G/B planar 
    * Q: If I want to capture multiple images (with different resolution) at a time, how should I do?
        * Do I have to add other fds for 2nd, 3rd CAPTURE queue?
        * Or, multiple images can be packed in the same CAPTURE buffer?
        * Or, multiple images can be placed in CAPTURE_MPLANE buffer ?
  * Compound control to receive a configuration.

Regards,
		Yuji

> -----Original Message-----
> From: Hans Verkuil <hverkuil@xs4all.nl>
> Sent: Wednesday, June 29, 2022 10:44 PM
> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> <yuji2.ishikawa@toshiba.co.jp>; robh+dt@kernel.org; iwamatsu nobuhiro(岩松
> 信洋 □ＳＷＣ◯ＡＣＴ) <nobuhiro1.iwamatsu@toshiba.co.jp>;
> sumit.semwal@linaro.org; christian.koenig@amd.com
> Cc: linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
> linux-media@vger.kernel.org; dri-devel@lists.freedesktop.org;
> linaro-mm-sig@lists.linaro.org
> Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing
> accelerator driver
> 
> My apologies for the late reply...
> 
> On 01/06/2022 03:40, yuji2.ishikawa@toshiba.co.jp wrote:
> > Hi Hans,
> >
> > Thank you for your advice.
> > I prepared some description of DNN accelerator and its usage.
> >
> > #### Handling memory blocks for Visconti5 accelerators
> >
> > Visconti5 Image-Processing-Accelerators do not have fine grained IOMMU,
> as CPU have.
> > Therefore, memory region to be passed to the accelerators should be
> physically contiguous.
> > We use DMA-BUF backed by CMA (Contiguous Memory Allocator) to allocate
> memory regions for sharing between CPU/IPAs.
> > Originally, in v4.19 based implementation, the ION allocator was used to
> allocate DMA-BUF instances.
> > For the latest implementation, DMA-BUF HEAPS is used.
> >
> > Two structure types are used to represent memory region passed to drivers.
> > * struct drv_ipa_buffer_info
> >   * to describe whole DMA-BUF instance
> > * struct drv_ipa_addr
> >   * to describe a memory region in a DMA-BUF instance
> >
> > for details, see usage sample of each IPA driver
> >
> >
> > #### Image Processing Accelerators overview
> >
> > Visconti5 SoC has following image processing accererators
> >
> > * AFFINE: 1 input image, 1 output image;
> Affine transform, Homography transform, Polynomial lens distortion, LUT
> transform
> > * DNN:    N input feature vector, N output feature vector;
> Deep neural network operation
> > * PYRAMID 3 input image, 3 * N output image;
> Resize grayscale/color image with N different parameters
> > * DSPIF:  M input image, N output image;
> Various opeations on images
> > * HOX:    1 input image (multi ROI), 1 input dictionary1 likelihood/feature
> vector;  Extended Histogram of Oriented Gradient based pattern matching
> > * HAMAT:  2 input feature vectors: 1 output corrdinate vector;
> Hamming distance matching for stereo vision
> > * FLMAT:  3 input image, N input feature point, N output matched point;
> Optical flow matching
> > * SMLDB:  1 input image, N input feature point, N output feature vector;
> Accelerated-KAZE feature descriptor accelerator
> > * STMAT:  2 input image, 1 output disparity image;
> Stereo disparity
> 
> It's not really easy to decide what is best. I would say that if both input and
> output are images (RGB, YUV, Grayscale), then a V4L2 memory-to-memory
> driver is what I would expect to see.
> 
> Where that is not the case, then a more custom approach makes sense.
> 
> In the list above I would put AFFINE, PYRAMID, DSPIF and possible STMAT in
> the V4L2 driver group, and the others more as custom drivers.
> 
> I think it also depends on how it is used: if a captured sensor image is typically
> passed in for further processing, i.e. it is closely related to the video ISP, then
> V4L2 is a reasonable choice.
> 
> A DNN driver, on the other hand, isn't using images at all, so for that something
> like this driver makes sense.
> 
> Regards,
> 
> 	Hans
> 
> >
> > see [0] Fig 7.2.1 for block diagram (of prototype chip)
> >
> >
> > #### DNN accelerator overview
> >
> > DNN accelerator is a proprietary CNN/DCNN processing accelerator
> developed by Toshiba.
> > Visconti5 SoC has 2 instances of DNN acclerator hardware.
> > Users convert existing Caffe/ONNX models to Visconti compatible models
> with an offline tool.
> > A converted model "Configuration Binary" includes:
> >   * instruction sequence for given network
> >   * weight/bias information
> >   * DMA configuration from/to global memory (for input/output feature)
> >
> > DNN acccelerator can handle either 1 plane or multiple ROIs at a single call.
> >
> > see [0] Fig 7.2.2 for block diagram of DNN accelerator
> >
> > CNN: Convolutional Neural Network
> > DCNN: Deep Convolutional Neural Network
> >
> >
> > #### Input / Output
> >
> > Input image or feature: base type is either of FP16, FP32, INT8,
> > UINT8, INT16 Output feature vector:  base type is either of FP16,
> > FP32, INT8, UINT8, INT16
> >
> > Input, Output, Weight, Bias can be placed on global memory and
> loaded/stored with DMA within DNN accelerator.
> > These data on global memory can be specified as either of:
> >   * single address to point single data block
> >   * list of address to point multiple data blocks (i.e. ROIs)
> >
> > DNN acclerator driver accepts an instance of "struct drv_dnn_descriptor"
> which includes addresses of input/output features and a configuration binary.
> >
> >
> > #### Descriptor Builder at userland
> >
> > Following APIs are provided to build a descriptor instance at userland.
> >
> > /* defined in drv_dnn_util.h */
> > int32_t drv_DNN_config_descript_init(struct drv_dnn_descriptor *desc,
> > struct drv_ipa_buffer_info *buffer, int32_t buffer_num); int32_t
> drv_DNN_config_exec_configuration(struct drv_dnn_descriptor *desc, const
> void *configuration_binary,
> >                                           struct drv_ipa_addr
> configuration_binary_addr, struct drv_ipa_addr *src_list,
> >                                           struct drv_ipa_addr *dst_list,
> int32_t list_num, struct drv_ipa_addr temporary_addr,
> >                                           int32_t temporary_size);
> > int32_t drv_DNN_config_descript_finalize(struct drv_dnn_descriptor
> > *desc);
> >
> > struct drv_dnn_descriptor is defined in drivers/soc/visconti/uapi/dnn.h.
> > I think this header should be placed anywhere else to be collected on "make
> headers_install" action of kernel building.
> >
> >
> > #### Usage sample (without error handlers)
> >
> >     #include <linux/dma-heap.h>
> >     #include "drv_ipa.h"
> >     #include "drv_dnn.h"
> >     #include "drv_dnn_util.h"
> >
> >     int allocate_buffer(int fd_heap, int size)
> >     {
> >         struct dma_heap_allocation_data heap_data_in={0};
> >         int ret;
> >
> >         heap_data_in.len = ROUNDUP_POW2(size);
> >         heap_data_in.fd_flags = O_RDWR | O_CLOEXEC;
> >
> >         ret = ioctl(fd_heap, DMA_HEAP_IOCTL_ALLOC, &heap_data_in);
> >         if (ret <0)
> >             return -1;
> >         else
> >             return heap_data_in.fd;
> >     }
> >
> >     void dnn_sample(int fd_dnn, int fd_conf, int fd_src, int fd_dst, int
> fd_temp)
> >     {
> >         int32_t ret;
> >         struct drv_ipa_buffer_info bufinfo[4] = {
> >
> {.fd=fd_conf, .coherent=true, .direction=DRV_IPA_DIR_TO_DEVICE},
> >
> {.fd=fd_src,  .coherent=true, .direction=DRV_IPA_DIR_TO_DEVICE},
> >
> {.fd=fd_dst,  .coherent=true, .direction=DRV_IPA_DIR_FROM_DEVICE},
> >
> {.fd=fd_temp, .coherent=true, .direction=DRV_IPA_DIR_FROM_DEVICE},
> >         };
> >         struct drv_ipa_addr conf_addr = {.buffer_index=0, .offset=0};
> >         struct drv_ipa_addr src_addr  = {.buffer_index=1, .offset=0};
> >         struct drv_ipa_addr dst_addr  = {.buffer_index=2, .offset=0};
> >         struct drv_ipa_addr temp_addr = {.buffer_index=3, .offset=0};
> >         struct drv_dnn_descriptor desc;
> >
> >         struct drv_ipa_addr src_list[] = {src_addr};
> >         struct drv_ipa_addr dst_list[] = {dst_addr};
> >
> >         uint8_t *config = (uint8_t*)mmap(NULL, DNN_CONF_BIN_SIZE,
> > PROT_READ, MAP_SHARED, fd_conf, 0);
> >
> >         drv_DNN_config_descript_init(&desc, bufinfo, 4);
> >         drv_DNN_config_exec_configuration(&desc, config, conf_addr,
> src_list, dst_list, 1, temp_addr, TEMP_BUF_SIZE);
> >         drv_DNN_config_descript_finalize(&desc);
> >
> >         ioctl(fd_dnn, IOC_IPA_START, &desc);
> >
> >         {
> >             struct pollfd fds[] =
> {.fd=fd_dnn, .events=POLL_IN, .revents=0};
> >             poll(fds, 1, 1000);
> >         }
> >     }
> >
> >     void sample()
> >     {
> >         int fd_dnn, fd_heap, fd_conf, fd_src, fd_dst, fd_temp;
> >
> >         fd_dnn = open("/dev/dnn0", O_RDWR);
> >         fd_heap = open("/dev/dma_heap/linux,cma", O_RDWR);
> >         fd_conf = allocate_buffer(fd_heap, DNN_CONF_BIN_ALLOC_SIZE);
> >         fd_src  = allocate_buffer(fd_heap, INPUT_IMG_ALLOC_SIZE);
> >         fd_dst  = allocate_buffer(fd_heap, OUTPUT_IMG_ALLOC_SIZE);
> >         fd_temp = allocate_buffer(fd_heap, TEMP_BUF_ALLOC_SIZE);
> >
> >         /* fill in input image and configuration here */
> >
> >         dnn_sample(fd_dnn, fd_conf, fd_src, fd_dst, fd_temp);
> >
> >         ...
> >     };
> >
> >
> > #### Reference
> >
> > * [0]
> https://toshiba.semicon-storage.com/content/dam/toshiba-ss-v2/master/en
> /company/technical-review/pdf/technical-review-18_e.pdf
> >   * Fig 7.2.1 shows the whole architecture of prototype chip
> >   * Fig 7.2.2 shows the architecture of DNN accelerator
> >
> >
> > Regards,
> > Yuji
> >
> >> -----Original Message-----
> >> From: Hans Verkuil <hverkuil@xs4all.nl>
> >> Sent: Friday, May 20, 2022 7:03 PM
> >> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> >> <yuji2.ishikawa@toshiba.co.jp>; robh+dt@kernel.org; iwamatsu
> >> nobuhiro(岩松
> >> 信洋 □ＳＷＣ◯ＡＣＴ) <nobuhiro1.iwamatsu@toshiba.co.jp>;
> >> sumit.semwal@linaro.org; christian.koenig@amd.com
> >> Cc: linux-arm-kernel@lists.infradead.org;
> >> linux-kernel@vger.kernel.org; linux-media@vger.kernel.org;
> >> dri-devel@lists.freedesktop.org; linaro-mm-sig@lists.linaro.org
> >> Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing
> >> accelerator driver
> >>
> >> Hi Yuji,
> >>
> >> On 5/20/22 11:48, yuji2.ishikawa@toshiba.co.jp wrote:
> >>> Hi Hans,
> >>>
> >>> Thank you for your comment.
> >>> I agree that this submission lacks documents sharing basic idea of
> >>> the
> >> accelerators; what do they accept and what do they yield.
> >>> Where can I put a new document? Can I put it as a comment in a
> >>> source? Can
> >> I add a file under Documentation/misc-devices directory?
> >>
> >> Start with explaining it by replying to this mail. Without knowing
> >> anything about the hardware, it is difficult to say what the best
> >> place is. Usually it is either the public API header, or somewhere in
> Documentation.
> >>
> >> The first step is to have a better understanding of the Visconti
> >> image hardware and to see what the best subsystem would be to support
> that hardware.
> >>
> >> Regards,
> >>
> >> 	Hans
> >>
> >>>
> >>> Thanks,
> >>> Yuji Ishikawa
> >>>
> >>>> -----Original Message-----
> >>>> From: Hans Verkuil <hverkuil@xs4all.nl>
> >>>> Sent: Thursday, May 12, 2022 8:15 PM
> >>>> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> >>>> <yuji2.ishikawa@toshiba.co.jp>; Rob Herring <robh+dt@kernel.org>;
> >>>> iwamatsu nobuhiro(岩松 信洋 □ＳＷＣ◯ＡＣＴ)
> >>>> <nobuhiro1.iwamatsu@toshiba.co.jp>; Sumit Semwal
> >>>> <sumit.semwal@linaro.org>; Christian König
> >> <christian.koenig@amd.com>
> >>>> Cc: linux-arm-kernel@lists.infradead.org;
> >>>> linux-kernel@vger.kernel.org; linux-media@vger.kernel.org;
> >>>> dri-devel@lists.freedesktop.org; linaro-mm-sig@lists.linaro.org
> >>>> Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing
> >>>> accelerator driver
> >>>>
> >>>> Hi Yuji,
> >>>>
> >>>> On 4/28/22 15:11, Yuji Ishikawa wrote:
> >>>>> This series is the DNN image processing accelerator driver for
> >>>>> Toshiba's ARM
> >>>> SoC, Visconti[0].
> >>>>> This provides DT binding documentation, device driver, MAINTAINER
> >> files.
> >>>>>
> >>>>> The second patch "soc: visconti: Add Toshiba Visconti image
> >>>>> processing
> >>>> accelerator common source"
> >>>>> and the fourth patch "MAINTAINERS: ..." are the same as the ones
> >>>>> in the
> >>>> preceding post for affine driver.
> >>>>
> >>>> There appears to be no documentation whatsoever, unless I am
> >>>> missing something.
> >>>>
> >>>> How is the uAPI supposed to be used? What does it do? What formats
> >>>> does it accept or produce?
> >>>>
> >>>> If this processes images, then (as Laurent mentioned) this is more
> >>>> suitable as a
> >>>> V4L2 mem2mem driver.
> >>>>
> >>>> See
> >>>> https://linuxtv.org/downloads/v4l-dvb-apis-new/userspace-api/v4l/de
> >>>> v-
> >>>> me
> >>>> m2mem.html
> >>>> and the many drivers in drivers/media that use it (git grep
> >> v4l2-mem2mem.h).
> >>>>
> >>>> But without any explanation whatsoever I have no idea what does or
> >>>> does not make sense.
> >>>>
> >>>> Regards,
> >>>>
> >>>> 	Hans
> >>>>
> >>>>>
> >>>>> Best regards,
> >>>>> Yuji
> >>>>>
> >>>>> [0]:
> >>>>>
> >>>>
> >>
> https://toshiba.semicon-storage.com/ap-en/semiconductor/product/image
> >>>> -
> >>>>> recognition-processors-visconti.html
> >>>>>
> >>>>> Yuji Ishikawa (4):
> >>>>>   dt-bindings: soc: visconti: Add Toshiba Visconti DNN image
> processing
> >>>>>     accelerator bindings
> >>>>>   soc: visconti: Add Toshiba Visconti image processing accelerator
> >>>>>     common source
> >>>>>   soc: visconti: Add Toshiba Visconti DNN image processing
> accelerator
> >>>>>   MAINTAINERS: Add entries for Toshiba Visconti DNN image
> processing
> >>>>>     accelerator
> >>>>>
> >>>>>  .../soc/visconti/toshiba,visconti-dnn.yaml    |  54 ++
> >>>>>  MAINTAINERS                                   |   2 +
> >>>>>  drivers/soc/Kconfig                           |   1 +
> >>>>>  drivers/soc/Makefile                          |   1 +
> >>>>>  drivers/soc/visconti/Kconfig                  |   7 +
> >>>>>  drivers/soc/visconti/Makefile                 |   8 +
> >>>>>  drivers/soc/visconti/dnn/Makefile             |   6 +
> >>>>>  drivers/soc/visconti/dnn/dnn.c                | 533
> >>>> ++++++++++++++++++
> >>>>>  drivers/soc/visconti/dnn/hwd_dnn.c            | 183 ++++++
> >>>>>  drivers/soc/visconti/dnn/hwd_dnn.h            |  68 +++
> >>>>>  drivers/soc/visconti/dnn/hwd_dnn_reg.h        | 228 ++++++++
> >>>>>  drivers/soc/visconti/ipa_common.c             |  55 ++
> >>>>>  drivers/soc/visconti/ipa_common.h             |  18 +
> >>>>>  drivers/soc/visconti/uapi/dnn.h               |  77 +++
> >>>>>  drivers/soc/visconti/uapi/ipa.h               |  88 +++
> >>>>>  15 files changed, 1329 insertions(+)  create mode 100644
> >>>>>
> Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.
> >>>>> ya ml  create mode 100644 drivers/soc/visconti/Kconfig  create
> >>>>> mode
> >>>>> 100644 drivers/soc/visconti/Makefile  create mode 100644
> >>>>> drivers/soc/visconti/dnn/Makefile  create mode 100644
> >>>>> drivers/soc/visconti/dnn/dnn.c  create mode 100644
> >>>>> drivers/soc/visconti/dnn/hwd_dnn.c
> >>>>>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.h
> >>>>>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn_reg.h
> >>>>>  create mode 100644 drivers/soc/visconti/ipa_common.c  create
> mode
> >>>>> 100644 drivers/soc/visconti/ipa_common.h  create mode 100644
> >>>>> drivers/soc/visconti/uapi/dnn.h  create mode 100644
> >>>>> drivers/soc/visconti/uapi/ipa.h
> >>>>>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 36+ messages in thread

* RE: [PATCH 0/4] Add Toshiba Visconti DNN image processing accelerator driver
@ 2022-07-05  1:17             ` yuji2.ishikawa
  0 siblings, 0 replies; 36+ messages in thread
From: yuji2.ishikawa @ 2022-07-05  1:17 UTC (permalink / raw)
  To: hverkuil, robh+dt, nobuhiro1.iwamatsu, sumit.semwal, christian.koenig
  Cc: linaro-mm-sig, dri-devel, linux-kernel, linux-arm-kernel, linux-media

Hi Hans,

Thank you for your advice.
I understand that V4L2 M2M driver is recommended for a group including Affine and Pyramid.

As for DSPIF, our application SW engineer said that there is another version of firmware to handle neural network.
Therefore, DSP can handle not only images, but also some array/list typed data.
It would be better to handle DSPIF as a misc device as well as DNN.

It is still difficult for me to imagine a whole structure of M2M type driver and corresponding userland application.
What do they look like? Is there any existing driver suitable for reference?

Let me think about a Pyramid HW which receives a planar (R/G/B as different planes, not in interleaved RGBRGB format) image, and yields 3 planar images.
Is it covered by only 1 fd, or multiple fds are required?
* A fd for Pyramid driver:
  * OUTPUT queue for receiving a picture?
    * OUTPUT or OUTPUT_MPLANE?
    * Q: Typically, RGB image is handled with single plane buffer in V4L2. RGB images do not have fourcc for multi-planar format (while YUV images do).
        * How should I explicitly request R/G/B planar buffer in V4L2 semantics?
  * CAPTURE queue for yielding a picture?
    * CAPTURE or CAPTURE_MPLANE?
    * Again: RGB interleaved vs R/G/B planar 
    * Q: If I want to capture multiple images (with different resolution) at a time, how should I do?
        * Do I have to add other fds for 2nd, 3rd CAPTURE queue?
        * Or, multiple images can be packed in the same CAPTURE buffer?
        * Or, multiple images can be placed in CAPTURE_MPLANE buffer ?
  * Compound control to receive a configuration.

Regards,
		Yuji

> -----Original Message-----
> From: Hans Verkuil <hverkuil@xs4all.nl>
> Sent: Wednesday, June 29, 2022 10:44 PM
> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> <yuji2.ishikawa@toshiba.co.jp>; robh+dt@kernel.org; iwamatsu nobuhiro(岩松
> 信洋 □ＳＷＣ◯ＡＣＴ) <nobuhiro1.iwamatsu@toshiba.co.jp>;
> sumit.semwal@linaro.org; christian.koenig@amd.com
> Cc: linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
> linux-media@vger.kernel.org; dri-devel@lists.freedesktop.org;
> linaro-mm-sig@lists.linaro.org
> Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing
> accelerator driver
> 
> My apologies for the late reply...
> 
> On 01/06/2022 03:40, yuji2.ishikawa@toshiba.co.jp wrote:
> > Hi Hans,
> >
> > Thank you for your advice.
> > I prepared some description of DNN accelerator and its usage.
> >
> > #### Handling memory blocks for Visconti5 accelerators
> >
> > Visconti5 Image-Processing-Accelerators do not have fine grained IOMMU,
> as CPU have.
> > Therefore, memory region to be passed to the accelerators should be
> physically contiguous.
> > We use DMA-BUF backed by CMA (Contiguous Memory Allocator) to allocate
> memory regions for sharing between CPU/IPAs.
> > Originally, in v4.19 based implementation, the ION allocator was used to
> allocate DMA-BUF instances.
> > For the latest implementation, DMA-BUF HEAPS is used.
> >
> > Two structure types are used to represent memory region passed to drivers.
> > * struct drv_ipa_buffer_info
> >   * to describe whole DMA-BUF instance
> > * struct drv_ipa_addr
> >   * to describe a memory region in a DMA-BUF instance
> >
> > for details, see usage sample of each IPA driver
> >
> >
> > #### Image Processing Accelerators overview
> >
> > Visconti5 SoC has following image processing accererators
> >
> > * AFFINE: 1 input image, 1 output image;
> Affine transform, Homography transform, Polynomial lens distortion, LUT
> transform
> > * DNN:    N input feature vector, N output feature vector;
> Deep neural network operation
> > * PYRAMID 3 input image, 3 * N output image;
> Resize grayscale/color image with N different parameters
> > * DSPIF:  M input image, N output image;
> Various opeations on images
> > * HOX:    1 input image (multi ROI), 1 input dictionary1 likelihood/feature
> vector;  Extended Histogram of Oriented Gradient based pattern matching
> > * HAMAT:  2 input feature vectors: 1 output corrdinate vector;
> Hamming distance matching for stereo vision
> > * FLMAT:  3 input image, N input feature point, N output matched point;
> Optical flow matching
> > * SMLDB:  1 input image, N input feature point, N output feature vector;
> Accelerated-KAZE feature descriptor accelerator
> > * STMAT:  2 input image, 1 output disparity image;
> Stereo disparity
> 
> It's not really easy to decide what is best. I would say that if both input and
> output are images (RGB, YUV, Grayscale), then a V4L2 memory-to-memory
> driver is what I would expect to see.
> 
> Where that is not the case, then a more custom approach makes sense.
> 
> In the list above I would put AFFINE, PYRAMID, DSPIF and possible STMAT in
> the V4L2 driver group, and the others more as custom drivers.
> 
> I think it also depends on how it is used: if a captured sensor image is typically
> passed in for further processing, i.e. it is closely related to the video ISP, then
> V4L2 is a reasonable choice.
> 
> A DNN driver, on the other hand, isn't using images at all, so for that something
> like this driver makes sense.
> 
> Regards,
> 
> 	Hans
> 
> >
> > see [0] Fig 7.2.1 for block diagram (of prototype chip)
> >
> >
> > #### DNN accelerator overview
> >
> > DNN accelerator is a proprietary CNN/DCNN processing accelerator
> developed by Toshiba.
> > Visconti5 SoC has 2 instances of DNN acclerator hardware.
> > Users convert existing Caffe/ONNX models to Visconti compatible models
> with an offline tool.
> > A converted model "Configuration Binary" includes:
> >   * instruction sequence for given network
> >   * weight/bias information
> >   * DMA configuration from/to global memory (for input/output feature)
> >
> > DNN acccelerator can handle either 1 plane or multiple ROIs at a single call.
> >
> > see [0] Fig 7.2.2 for block diagram of DNN accelerator
> >
> > CNN: Convolutional Neural Network
> > DCNN: Deep Convolutional Neural Network
> >
> >
> > #### Input / Output
> >
> > Input image or feature: base type is either of FP16, FP32, INT8,
> > UINT8, INT16 Output feature vector:  base type is either of FP16,
> > FP32, INT8, UINT8, INT16
> >
> > Input, Output, Weight, Bias can be placed on global memory and
> loaded/stored with DMA within DNN accelerator.
> > These data on global memory can be specified as either of:
> >   * single address to point single data block
> >   * list of address to point multiple data blocks (i.e. ROIs)
> >
> > DNN acclerator driver accepts an instance of "struct drv_dnn_descriptor"
> which includes addresses of input/output features and a configuration binary.
> >
> >
> > #### Descriptor Builder at userland
> >
> > Following APIs are provided to build a descriptor instance at userland.
> >
> > /* defined in drv_dnn_util.h */
> > int32_t drv_DNN_config_descript_init(struct drv_dnn_descriptor *desc,
> > struct drv_ipa_buffer_info *buffer, int32_t buffer_num); int32_t
> drv_DNN_config_exec_configuration(struct drv_dnn_descriptor *desc, const
> void *configuration_binary,
> >                                           struct drv_ipa_addr
> configuration_binary_addr, struct drv_ipa_addr *src_list,
> >                                           struct drv_ipa_addr *dst_list,
> int32_t list_num, struct drv_ipa_addr temporary_addr,
> >                                           int32_t temporary_size);
> > int32_t drv_DNN_config_descript_finalize(struct drv_dnn_descriptor
> > *desc);
> >
> > struct drv_dnn_descriptor is defined in drivers/soc/visconti/uapi/dnn.h.
> > I think this header should be placed anywhere else to be collected on "make
> headers_install" action of kernel building.
> >
> >
> > #### Usage sample (without error handlers)
> >
> >     #include <linux/dma-heap.h>
> >     #include "drv_ipa.h"
> >     #include "drv_dnn.h"
> >     #include "drv_dnn_util.h"
> >
> >     int allocate_buffer(int fd_heap, int size)
> >     {
> >         struct dma_heap_allocation_data heap_data_in={0};
> >         int ret;
> >
> >         heap_data_in.len = ROUNDUP_POW2(size);
> >         heap_data_in.fd_flags = O_RDWR | O_CLOEXEC;
> >
> >         ret = ioctl(fd_heap, DMA_HEAP_IOCTL_ALLOC, &heap_data_in);
> >         if (ret <0)
> >             return -1;
> >         else
> >             return heap_data_in.fd;
> >     }
> >
> >     void dnn_sample(int fd_dnn, int fd_conf, int fd_src, int fd_dst, int
> fd_temp)
> >     {
> >         int32_t ret;
> >         struct drv_ipa_buffer_info bufinfo[4] = {
> >
> {.fd=fd_conf, .coherent=true, .direction=DRV_IPA_DIR_TO_DEVICE},
> >
> {.fd=fd_src,  .coherent=true, .direction=DRV_IPA_DIR_TO_DEVICE},
> >
> {.fd=fd_dst,  .coherent=true, .direction=DRV_IPA_DIR_FROM_DEVICE},
> >
> {.fd=fd_temp, .coherent=true, .direction=DRV_IPA_DIR_FROM_DEVICE},
> >         };
> >         struct drv_ipa_addr conf_addr = {.buffer_index=0, .offset=0};
> >         struct drv_ipa_addr src_addr  = {.buffer_index=1, .offset=0};
> >         struct drv_ipa_addr dst_addr  = {.buffer_index=2, .offset=0};
> >         struct drv_ipa_addr temp_addr = {.buffer_index=3, .offset=0};
> >         struct drv_dnn_descriptor desc;
> >
> >         struct drv_ipa_addr src_list[] = {src_addr};
> >         struct drv_ipa_addr dst_list[] = {dst_addr};
> >
> >         uint8_t *config = (uint8_t*)mmap(NULL, DNN_CONF_BIN_SIZE,
> > PROT_READ, MAP_SHARED, fd_conf, 0);
> >
> >         drv_DNN_config_descript_init(&desc, bufinfo, 4);
> >         drv_DNN_config_exec_configuration(&desc, config, conf_addr,
> src_list, dst_list, 1, temp_addr, TEMP_BUF_SIZE);
> >         drv_DNN_config_descript_finalize(&desc);
> >
> >         ioctl(fd_dnn, IOC_IPA_START, &desc);
> >
> >         {
> >             struct pollfd fds[] =
> {.fd=fd_dnn, .events=POLL_IN, .revents=0};
> >             poll(fds, 1, 1000);
> >         }
> >     }
> >
> >     void sample()
> >     {
> >         int fd_dnn, fd_heap, fd_conf, fd_src, fd_dst, fd_temp;
> >
> >         fd_dnn = open("/dev/dnn0", O_RDWR);
> >         fd_heap = open("/dev/dma_heap/linux,cma", O_RDWR);
> >         fd_conf = allocate_buffer(fd_heap, DNN_CONF_BIN_ALLOC_SIZE);
> >         fd_src  = allocate_buffer(fd_heap, INPUT_IMG_ALLOC_SIZE);
> >         fd_dst  = allocate_buffer(fd_heap, OUTPUT_IMG_ALLOC_SIZE);
> >         fd_temp = allocate_buffer(fd_heap, TEMP_BUF_ALLOC_SIZE);
> >
> >         /* fill in input image and configuration here */
> >
> >         dnn_sample(fd_dnn, fd_conf, fd_src, fd_dst, fd_temp);
> >
> >         ...
> >     };
> >
> >
> > #### Reference
> >
> > * [0]
> https://toshiba.semicon-storage.com/content/dam/toshiba-ss-v2/master/en
> /company/technical-review/pdf/technical-review-18_e.pdf
> >   * Fig 7.2.1 shows the whole architecture of prototype chip
> >   * Fig 7.2.2 shows the architecture of DNN accelerator
> >
> >
> > Regards,
> > Yuji
> >
> >> -----Original Message-----
> >> From: Hans Verkuil <hverkuil@xs4all.nl>
> >> Sent: Friday, May 20, 2022 7:03 PM
> >> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> >> <yuji2.ishikawa@toshiba.co.jp>; robh+dt@kernel.org; iwamatsu
> >> nobuhiro(岩松
> >> 信洋 □ＳＷＣ◯ＡＣＴ) <nobuhiro1.iwamatsu@toshiba.co.jp>;
> >> sumit.semwal@linaro.org; christian.koenig@amd.com
> >> Cc: linux-arm-kernel@lists.infradead.org;
> >> linux-kernel@vger.kernel.org; linux-media@vger.kernel.org;
> >> dri-devel@lists.freedesktop.org; linaro-mm-sig@lists.linaro.org
> >> Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing
> >> accelerator driver
> >>
> >> Hi Yuji,
> >>
> >> On 5/20/22 11:48, yuji2.ishikawa@toshiba.co.jp wrote:
> >>> Hi Hans,
> >>>
> >>> Thank you for your comment.
> >>> I agree that this submission lacks documents sharing basic idea of
> >>> the
> >> accelerators; what do they accept and what do they yield.
> >>> Where can I put a new document? Can I put it as a comment in a
> >>> source? Can
> >> I add a file under Documentation/misc-devices directory?
> >>
> >> Start with explaining it by replying to this mail. Without knowing
> >> anything about the hardware, it is difficult to say what the best
> >> place is. Usually it is either the public API header, or somewhere in
> Documentation.
> >>
> >> The first step is to have a better understanding of the Visconti
> >> image hardware and to see what the best subsystem would be to support
> that hardware.
> >>
> >> Regards,
> >>
> >> 	Hans
> >>
> >>>
> >>> Thanks,
> >>> Yuji Ishikawa
> >>>
> >>>> -----Original Message-----
> >>>> From: Hans Verkuil <hverkuil@xs4all.nl>
> >>>> Sent: Thursday, May 12, 2022 8:15 PM
> >>>> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> >>>> <yuji2.ishikawa@toshiba.co.jp>; Rob Herring <robh+dt@kernel.org>;
> >>>> iwamatsu nobuhiro(岩松 信洋 □ＳＷＣ◯ＡＣＴ)
> >>>> <nobuhiro1.iwamatsu@toshiba.co.jp>; Sumit Semwal
> >>>> <sumit.semwal@linaro.org>; Christian König
> >> <christian.koenig@amd.com>
> >>>> Cc: linux-arm-kernel@lists.infradead.org;
> >>>> linux-kernel@vger.kernel.org; linux-media@vger.kernel.org;
> >>>> dri-devel@lists.freedesktop.org; linaro-mm-sig@lists.linaro.org
> >>>> Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing
> >>>> accelerator driver
> >>>>
> >>>> Hi Yuji,
> >>>>
> >>>> On 4/28/22 15:11, Yuji Ishikawa wrote:
> >>>>> This series is the DNN image processing accelerator driver for
> >>>>> Toshiba's ARM
> >>>> SoC, Visconti[0].
> >>>>> This provides DT binding documentation, device driver, MAINTAINER
> >> files.
> >>>>>
> >>>>> The second patch "soc: visconti: Add Toshiba Visconti image
> >>>>> processing
> >>>> accelerator common source"
> >>>>> and the fourth patch "MAINTAINERS: ..." are the same as the ones
> >>>>> in the
> >>>> preceding post for affine driver.
> >>>>
> >>>> There appears to be no documentation whatsoever, unless I am
> >>>> missing something.
> >>>>
> >>>> How is the uAPI supposed to be used? What does it do? What formats
> >>>> does it accept or produce?
> >>>>
> >>>> If this processes images, then (as Laurent mentioned) this is more
> >>>> suitable as a
> >>>> V4L2 mem2mem driver.
> >>>>
> >>>> See
> >>>> https://linuxtv.org/downloads/v4l-dvb-apis-new/userspace-api/v4l/de
> >>>> v-
> >>>> me
> >>>> m2mem.html
> >>>> and the many drivers in drivers/media that use it (git grep
> >> v4l2-mem2mem.h).
> >>>>
> >>>> But without any explanation whatsoever I have no idea what does or
> >>>> does not make sense.
> >>>>
> >>>> Regards,
> >>>>
> >>>> 	Hans
> >>>>
> >>>>>
> >>>>> Best regards,
> >>>>> Yuji
> >>>>>
> >>>>> [0]:
> >>>>>
> >>>>
> >>
> https://toshiba.semicon-storage.com/ap-en/semiconductor/product/image
> >>>> -
> >>>>> recognition-processors-visconti.html
> >>>>>
> >>>>> Yuji Ishikawa (4):
> >>>>>   dt-bindings: soc: visconti: Add Toshiba Visconti DNN image
> processing
> >>>>>     accelerator bindings
> >>>>>   soc: visconti: Add Toshiba Visconti image processing accelerator
> >>>>>     common source
> >>>>>   soc: visconti: Add Toshiba Visconti DNN image processing
> accelerator
> >>>>>   MAINTAINERS: Add entries for Toshiba Visconti DNN image
> processing
> >>>>>     accelerator
> >>>>>
> >>>>>  .../soc/visconti/toshiba,visconti-dnn.yaml    |  54 ++
> >>>>>  MAINTAINERS                                   |   2 +
> >>>>>  drivers/soc/Kconfig                           |   1 +
> >>>>>  drivers/soc/Makefile                          |   1 +
> >>>>>  drivers/soc/visconti/Kconfig                  |   7 +
> >>>>>  drivers/soc/visconti/Makefile                 |   8 +
> >>>>>  drivers/soc/visconti/dnn/Makefile             |   6 +
> >>>>>  drivers/soc/visconti/dnn/dnn.c                | 533
> >>>> ++++++++++++++++++
> >>>>>  drivers/soc/visconti/dnn/hwd_dnn.c            | 183 ++++++
> >>>>>  drivers/soc/visconti/dnn/hwd_dnn.h            |  68 +++
> >>>>>  drivers/soc/visconti/dnn/hwd_dnn_reg.h        | 228 ++++++++
> >>>>>  drivers/soc/visconti/ipa_common.c             |  55 ++
> >>>>>  drivers/soc/visconti/ipa_common.h             |  18 +
> >>>>>  drivers/soc/visconti/uapi/dnn.h               |  77 +++
> >>>>>  drivers/soc/visconti/uapi/ipa.h               |  88 +++
> >>>>>  15 files changed, 1329 insertions(+)  create mode 100644
> >>>>>
> Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.
> >>>>> ya ml  create mode 100644 drivers/soc/visconti/Kconfig  create
> >>>>> mode
> >>>>> 100644 drivers/soc/visconti/Makefile  create mode 100644
> >>>>> drivers/soc/visconti/dnn/Makefile  create mode 100644
> >>>>> drivers/soc/visconti/dnn/dnn.c  create mode 100644
> >>>>> drivers/soc/visconti/dnn/hwd_dnn.c
> >>>>>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.h
> >>>>>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn_reg.h
> >>>>>  create mode 100644 drivers/soc/visconti/ipa_common.c  create
> mode
> >>>>> 100644 drivers/soc/visconti/ipa_common.h  create mode 100644
> >>>>> drivers/soc/visconti/uapi/dnn.h  create mode 100644
> >>>>> drivers/soc/visconti/uapi/ipa.h
> >>>>>

^ permalink raw reply	[flat|nested] 36+ messages in thread

* RE: [PATCH 0/4] Add Toshiba Visconti DNN image processing accelerator driver
  2022-07-05  1:17             ` yuji2.ishikawa
  (?)
@ 2022-07-12  5:01               ` yuji2.ishikawa
  -1 siblings, 0 replies; 36+ messages in thread
From: yuji2.ishikawa @ 2022-07-12  5:01 UTC (permalink / raw)
  To: hverkuil, robh+dt, nobuhiro1.iwamatsu, sumit.semwal, christian.koenig
  Cc: linux-arm-kernel, linux-kernel, linux-media, dri-devel, linaro-mm-sig

Hi Hans,

I'm going to submit DNN driver (with misc driver style) again.
Updated version will include corrections suggested in reviews.

For example:
* apply checkpatch.pl --strict
* uppercase letters in function name -> make them lowercase
* use of integer types: uint32_t -> u32 ( _u32 in user API header )

Please let me know further actions which should be done before submission.

Regards,
	Yuji Ishikawa

> -----Original Message-----
> From: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> Sent: Tuesday, July 5, 2022 10:17 AM
> To: Hans Verkuil <hverkuil@xs4all.nl>; robh+dt@kernel.org; iwamatsu
> nobuhiro(岩松 信洋 □ＳＷＣ◯ＡＣＴ) <nobuhiro1.iwamatsu@toshiba.co.jp>;
> sumit.semwal@linaro.org; christian.koenig@amd.com
> Cc: linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
> linux-media@vger.kernel.org; dri-devel@lists.freedesktop.org;
> linaro-mm-sig@lists.linaro.org
> Subject: RE: [PATCH 0/4] Add Toshiba Visconti DNN image processing
> accelerator driver
> 
> Hi Hans,
> 
> Thank you for your advice.
> I understand that V4L2 M2M driver is recommended for a group including
> Affine and Pyramid.
> 
> As for DSPIF, our application SW engineer said that there is another version of
> firmware to handle neural network.
> Therefore, DSP can handle not only images, but also some array/list typed
> data.
> It would be better to handle DSPIF as a misc device as well as DNN.
> 
> It is still difficult for me to imagine a whole structure of M2M type driver and
> corresponding userland application.
> What do they look like? Is there any existing driver suitable for reference?
> 
> Let me think about a Pyramid HW which receives a planar (R/G/B as different
> planes, not in interleaved RGBRGB format) image, and yields 3 planar images.
> Is it covered by only 1 fd, or multiple fds are required?
> * A fd for Pyramid driver:
>   * OUTPUT queue for receiving a picture?
>     * OUTPUT or OUTPUT_MPLANE?
>     * Q: Typically, RGB image is handled with single plane buffer in V4L2. RGB
> images do not have fourcc for multi-planar format (while YUV images do).
>         * How should I explicitly request R/G/B planar buffer in V4L2
> semantics?
>   * CAPTURE queue for yielding a picture?
>     * CAPTURE or CAPTURE_MPLANE?
>     * Again: RGB interleaved vs R/G/B planar
>     * Q: If I want to capture multiple images (with different resolution) at a time,
> how should I do?
>         * Do I have to add other fds for 2nd, 3rd CAPTURE queue?
>         * Or, multiple images can be packed in the same CAPTURE buffer?
>         * Or, multiple images can be placed in CAPTURE_MPLANE buffer ?
>   * Compound control to receive a configuration.
> 
> Regards,
> 		Yuji
> 
> > -----Original Message-----
> > From: Hans Verkuil <hverkuil@xs4all.nl>
> > Sent: Wednesday, June 29, 2022 10:44 PM
> > To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> > <yuji2.ishikawa@toshiba.co.jp>; robh+dt@kernel.org; iwamatsu
> > nobuhiro(岩松
> > 信洋 □ＳＷＣ◯ＡＣＴ) <nobuhiro1.iwamatsu@toshiba.co.jp>;
> > sumit.semwal@linaro.org; christian.koenig@amd.com
> > Cc: linux-arm-kernel@lists.infradead.org;
> > linux-kernel@vger.kernel.org; linux-media@vger.kernel.org;
> > dri-devel@lists.freedesktop.org; linaro-mm-sig@lists.linaro.org
> > Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing
> > accelerator driver
> >
> > My apologies for the late reply...
> >
> > On 01/06/2022 03:40, yuji2.ishikawa@toshiba.co.jp wrote:
> > > Hi Hans,
> > >
> > > Thank you for your advice.
> > > I prepared some description of DNN accelerator and its usage.
> > >
> > > #### Handling memory blocks for Visconti5 accelerators
> > >
> > > Visconti5 Image-Processing-Accelerators do not have fine grained
> > > IOMMU,
> > as CPU have.
> > > Therefore, memory region to be passed to the accelerators should be
> > physically contiguous.
> > > We use DMA-BUF backed by CMA (Contiguous Memory Allocator) to
> > > allocate
> > memory regions for sharing between CPU/IPAs.
> > > Originally, in v4.19 based implementation, the ION allocator was
> > > used to
> > allocate DMA-BUF instances.
> > > For the latest implementation, DMA-BUF HEAPS is used.
> > >
> > > Two structure types are used to represent memory region passed to drivers.
> > > * struct drv_ipa_buffer_info
> > >   * to describe whole DMA-BUF instance
> > > * struct drv_ipa_addr
> > >   * to describe a memory region in a DMA-BUF instance
> > >
> > > for details, see usage sample of each IPA driver
> > >
> > >
> > > #### Image Processing Accelerators overview
> > >
> > > Visconti5 SoC has following image processing accererators
> > >
> > > * AFFINE: 1 input image, 1 output image;
> > Affine transform, Homography transform, Polynomial lens distortion,
> > LUT transform
> > > * DNN:    N input feature vector, N output feature vector;
> > Deep neural network operation
> > > * PYRAMID 3 input image, 3 * N output image;
> > Resize grayscale/color image with N different parameters
> > > * DSPIF:  M input image, N output image;
> > Various opeations on images
> > > * HOX:    1 input image (multi ROI), 1 input dictionary1 likelihood/feature
> > vector;  Extended Histogram of Oriented Gradient based pattern
> > matching
> > > * HAMAT:  2 input feature vectors: 1 output corrdinate vector;
> > Hamming distance matching for stereo vision
> > > * FLMAT:  3 input image, N input feature point, N output matched
> > > point;
> > Optical flow matching
> > > * SMLDB:  1 input image, N input feature point, N output feature
> > > vector;
> > Accelerated-KAZE feature descriptor accelerator
> > > * STMAT:  2 input image, 1 output disparity image;
> > Stereo disparity
> >
> > It's not really easy to decide what is best. I would say that if both
> > input and output are images (RGB, YUV, Grayscale), then a V4L2
> > memory-to-memory driver is what I would expect to see.
> >
> > Where that is not the case, then a more custom approach makes sense.
> >
> > In the list above I would put AFFINE, PYRAMID, DSPIF and possible
> > STMAT in the V4L2 driver group, and the others more as custom drivers.
> >
> > I think it also depends on how it is used: if a captured sensor image
> > is typically passed in for further processing, i.e. it is closely
> > related to the video ISP, then
> > V4L2 is a reasonable choice.
> >
> > A DNN driver, on the other hand, isn't using images at all, so for
> > that something like this driver makes sense.
> >
> > Regards,
> >
> > 	Hans
> >
> > >
> > > see [0] Fig 7.2.1 for block diagram (of prototype chip)
> > >
> > >
> > > #### DNN accelerator overview
> > >
> > > DNN accelerator is a proprietary CNN/DCNN processing accelerator
> > developed by Toshiba.
> > > Visconti5 SoC has 2 instances of DNN acclerator hardware.
> > > Users convert existing Caffe/ONNX models to Visconti compatible
> > > models
> > with an offline tool.
> > > A converted model "Configuration Binary" includes:
> > >   * instruction sequence for given network
> > >   * weight/bias information
> > >   * DMA configuration from/to global memory (for input/output
> > > feature)
> > >
> > > DNN acccelerator can handle either 1 plane or multiple ROIs at a single call.
> > >
> > > see [0] Fig 7.2.2 for block diagram of DNN accelerator
> > >
> > > CNN: Convolutional Neural Network
> > > DCNN: Deep Convolutional Neural Network
> > >
> > >
> > > #### Input / Output
> > >
> > > Input image or feature: base type is either of FP16, FP32, INT8,
> > > UINT8, INT16 Output feature vector:  base type is either of FP16,
> > > FP32, INT8, UINT8, INT16
> > >
> > > Input, Output, Weight, Bias can be placed on global memory and
> > loaded/stored with DMA within DNN accelerator.
> > > These data on global memory can be specified as either of:
> > >   * single address to point single data block
> > >   * list of address to point multiple data blocks (i.e. ROIs)
> > >
> > > DNN acclerator driver accepts an instance of "struct drv_dnn_descriptor"
> > which includes addresses of input/output features and a configuration
> binary.
> > >
> > >
> > > #### Descriptor Builder at userland
> > >
> > > Following APIs are provided to build a descriptor instance at userland.
> > >
> > > /* defined in drv_dnn_util.h */
> > > int32_t drv_DNN_config_descript_init(struct drv_dnn_descriptor
> > > *desc, struct drv_ipa_buffer_info *buffer, int32_t buffer_num);
> > > int32_t
> > drv_DNN_config_exec_configuration(struct drv_dnn_descriptor *desc,
> > const void *configuration_binary,
> > >                                           struct drv_ipa_addr
> > configuration_binary_addr, struct drv_ipa_addr *src_list,
> > >                                           struct drv_ipa_addr
> > > *dst_list,
> > int32_t list_num, struct drv_ipa_addr temporary_addr,
> > >                                           int32_t temporary_size);
> > > int32_t drv_DNN_config_descript_finalize(struct drv_dnn_descriptor
> > > *desc);
> > >
> > > struct drv_dnn_descriptor is defined in drivers/soc/visconti/uapi/dnn.h.
> > > I think this header should be placed anywhere else to be collected
> > > on "make
> > headers_install" action of kernel building.
> > >
> > >
> > > #### Usage sample (without error handlers)
> > >
> > >     #include <linux/dma-heap.h>
> > >     #include "drv_ipa.h"
> > >     #include "drv_dnn.h"
> > >     #include "drv_dnn_util.h"
> > >
> > >     int allocate_buffer(int fd_heap, int size)
> > >     {
> > >         struct dma_heap_allocation_data heap_data_in={0};
> > >         int ret;
> > >
> > >         heap_data_in.len = ROUNDUP_POW2(size);
> > >         heap_data_in.fd_flags = O_RDWR | O_CLOEXEC;
> > >
> > >         ret = ioctl(fd_heap, DMA_HEAP_IOCTL_ALLOC, &heap_data_in);
> > >         if (ret <0)
> > >             return -1;
> > >         else
> > >             return heap_data_in.fd;
> > >     }
> > >
> > >     void dnn_sample(int fd_dnn, int fd_conf, int fd_src, int fd_dst,
> > > int
> > fd_temp)
> > >     {
> > >         int32_t ret;
> > >         struct drv_ipa_buffer_info bufinfo[4] = {
> > >
> > {.fd=fd_conf, .coherent=true, .direction=DRV_IPA_DIR_TO_DEVICE},
> > >
> > {.fd=fd_src,  .coherent=true, .direction=DRV_IPA_DIR_TO_DEVICE},
> > >
> > {.fd=fd_dst,  .coherent=true, .direction=DRV_IPA_DIR_FROM_DEVICE},
> > >
> > {.fd=fd_temp, .coherent=true, .direction=DRV_IPA_DIR_FROM_DEVICE},
> > >         };
> > >         struct drv_ipa_addr conf_addr = {.buffer_index=0, .offset=0};
> > >         struct drv_ipa_addr src_addr  = {.buffer_index=1, .offset=0};
> > >         struct drv_ipa_addr dst_addr  = {.buffer_index=2, .offset=0};
> > >         struct drv_ipa_addr temp_addr = {.buffer_index=3, .offset=0};
> > >         struct drv_dnn_descriptor desc;
> > >
> > >         struct drv_ipa_addr src_list[] = {src_addr};
> > >         struct drv_ipa_addr dst_list[] = {dst_addr};
> > >
> > >         uint8_t *config = (uint8_t*)mmap(NULL, DNN_CONF_BIN_SIZE,
> > > PROT_READ, MAP_SHARED, fd_conf, 0);
> > >
> > >         drv_DNN_config_descript_init(&desc, bufinfo, 4);
> > >         drv_DNN_config_exec_configuration(&desc, config, conf_addr,
> > src_list, dst_list, 1, temp_addr, TEMP_BUF_SIZE);
> > >         drv_DNN_config_descript_finalize(&desc);
> > >
> > >         ioctl(fd_dnn, IOC_IPA_START, &desc);
> > >
> > >         {
> > >             struct pollfd fds[] =
> > {.fd=fd_dnn, .events=POLL_IN, .revents=0};
> > >             poll(fds, 1, 1000);
> > >         }
> > >     }
> > >
> > >     void sample()
> > >     {
> > >         int fd_dnn, fd_heap, fd_conf, fd_src, fd_dst, fd_temp;
> > >
> > >         fd_dnn = open("/dev/dnn0", O_RDWR);
> > >         fd_heap = open("/dev/dma_heap/linux,cma", O_RDWR);
> > >         fd_conf = allocate_buffer(fd_heap,
> DNN_CONF_BIN_ALLOC_SIZE);
> > >         fd_src  = allocate_buffer(fd_heap, INPUT_IMG_ALLOC_SIZE);
> > >         fd_dst  = allocate_buffer(fd_heap, OUTPUT_IMG_ALLOC_SIZE);
> > >         fd_temp = allocate_buffer(fd_heap, TEMP_BUF_ALLOC_SIZE);
> > >
> > >         /* fill in input image and configuration here */
> > >
> > >         dnn_sample(fd_dnn, fd_conf, fd_src, fd_dst, fd_temp);
> > >
> > >         ...
> > >     };
> > >
> > >
> > > #### Reference
> > >
> > > * [0]
> >
> https://toshiba.semicon-storage.com/content/dam/toshiba-ss-v2/master/e
> > n /company/technical-review/pdf/technical-review-18_e.pdf
> > >   * Fig 7.2.1 shows the whole architecture of prototype chip
> > >   * Fig 7.2.2 shows the architecture of DNN accelerator
> > >
> > >
> > > Regards,
> > > Yuji
> > >
> > >> -----Original Message-----
> > >> From: Hans Verkuil <hverkuil@xs4all.nl>
> > >> Sent: Friday, May 20, 2022 7:03 PM
> > >> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> > >> <yuji2.ishikawa@toshiba.co.jp>; robh+dt@kernel.org; iwamatsu
> > >> nobuhiro(岩松
> > >> 信洋 □ＳＷＣ◯ＡＣＴ) <nobuhiro1.iwamatsu@toshiba.co.jp>;
> > >> sumit.semwal@linaro.org; christian.koenig@amd.com
> > >> Cc: linux-arm-kernel@lists.infradead.org;
> > >> linux-kernel@vger.kernel.org; linux-media@vger.kernel.org;
> > >> dri-devel@lists.freedesktop.org; linaro-mm-sig@lists.linaro.org
> > >> Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing
> > >> accelerator driver
> > >>
> > >> Hi Yuji,
> > >>
> > >> On 5/20/22 11:48, yuji2.ishikawa@toshiba.co.jp wrote:
> > >>> Hi Hans,
> > >>>
> > >>> Thank you for your comment.
> > >>> I agree that this submission lacks documents sharing basic idea of
> > >>> the
> > >> accelerators; what do they accept and what do they yield.
> > >>> Where can I put a new document? Can I put it as a comment in a
> > >>> source? Can
> > >> I add a file under Documentation/misc-devices directory?
> > >>
> > >> Start with explaining it by replying to this mail. Without knowing
> > >> anything about the hardware, it is difficult to say what the best
> > >> place is. Usually it is either the public API header, or somewhere
> > >> in
> > Documentation.
> > >>
> > >> The first step is to have a better understanding of the Visconti
> > >> image hardware and to see what the best subsystem would be to
> > >> support
> > that hardware.
> > >>
> > >> Regards,
> > >>
> > >> 	Hans
> > >>
> > >>>
> > >>> Thanks,
> > >>> Yuji Ishikawa
> > >>>
> > >>>> -----Original Message-----
> > >>>> From: Hans Verkuil <hverkuil@xs4all.nl>
> > >>>> Sent: Thursday, May 12, 2022 8:15 PM
> > >>>> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> > >>>> <yuji2.ishikawa@toshiba.co.jp>; Rob Herring <robh+dt@kernel.org>;
> > >>>> iwamatsu nobuhiro(岩松 信洋 □ＳＷＣ◯ＡＣＴ)
> > >>>> <nobuhiro1.iwamatsu@toshiba.co.jp>; Sumit Semwal
> > >>>> <sumit.semwal@linaro.org>; Christian König
> > >> <christian.koenig@amd.com>
> > >>>> Cc: linux-arm-kernel@lists.infradead.org;
> > >>>> linux-kernel@vger.kernel.org; linux-media@vger.kernel.org;
> > >>>> dri-devel@lists.freedesktop.org; linaro-mm-sig@lists.linaro.org
> > >>>> Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image
> > >>>> processing accelerator driver
> > >>>>
> > >>>> Hi Yuji,
> > >>>>
> > >>>> On 4/28/22 15:11, Yuji Ishikawa wrote:
> > >>>>> This series is the DNN image processing accelerator driver for
> > >>>>> Toshiba's ARM
> > >>>> SoC, Visconti[0].
> > >>>>> This provides DT binding documentation, device driver,
> > >>>>> MAINTAINER
> > >> files.
> > >>>>>
> > >>>>> The second patch "soc: visconti: Add Toshiba Visconti image
> > >>>>> processing
> > >>>> accelerator common source"
> > >>>>> and the fourth patch "MAINTAINERS: ..." are the same as the ones
> > >>>>> in the
> > >>>> preceding post for affine driver.
> > >>>>
> > >>>> There appears to be no documentation whatsoever, unless I am
> > >>>> missing something.
> > >>>>
> > >>>> How is the uAPI supposed to be used? What does it do? What
> > >>>> formats does it accept or produce?
> > >>>>
> > >>>> If this processes images, then (as Laurent mentioned) this is
> > >>>> more suitable as a
> > >>>> V4L2 mem2mem driver.
> > >>>>
> > >>>> See
> > >>>> https://linuxtv.org/downloads/v4l-dvb-apis-new/userspace-api/v4l/
> > >>>> de
> > >>>> v-
> > >>>> me
> > >>>> m2mem.html
> > >>>> and the many drivers in drivers/media that use it (git grep
> > >> v4l2-mem2mem.h).
> > >>>>
> > >>>> But without any explanation whatsoever I have no idea what does
> > >>>> or does not make sense.
> > >>>>
> > >>>> Regards,
> > >>>>
> > >>>> 	Hans
> > >>>>
> > >>>>>
> > >>>>> Best regards,
> > >>>>> Yuji
> > >>>>>
> > >>>>> [0]:
> > >>>>>
> > >>>>
> > >>
> > https://toshiba.semicon-storage.com/ap-en/semiconductor/product/image
> > >>>> -
> > >>>>> recognition-processors-visconti.html
> > >>>>>
> > >>>>> Yuji Ishikawa (4):
> > >>>>>   dt-bindings: soc: visconti: Add Toshiba Visconti DNN image
> > processing
> > >>>>>     accelerator bindings
> > >>>>>   soc: visconti: Add Toshiba Visconti image processing accelerator
> > >>>>>     common source
> > >>>>>   soc: visconti: Add Toshiba Visconti DNN image processing
> > accelerator
> > >>>>>   MAINTAINERS: Add entries for Toshiba Visconti DNN image
> > processing
> > >>>>>     accelerator
> > >>>>>
> > >>>>>  .../soc/visconti/toshiba,visconti-dnn.yaml    |  54 ++
> > >>>>>  MAINTAINERS                                   |   2 +
> > >>>>>  drivers/soc/Kconfig                           |   1 +
> > >>>>>  drivers/soc/Makefile                          |   1 +
> > >>>>>  drivers/soc/visconti/Kconfig                  |   7 +
> > >>>>>  drivers/soc/visconti/Makefile                 |   8 +
> > >>>>>  drivers/soc/visconti/dnn/Makefile             |   6 +
> > >>>>>  drivers/soc/visconti/dnn/dnn.c                | 533
> > >>>> ++++++++++++++++++
> > >>>>>  drivers/soc/visconti/dnn/hwd_dnn.c            | 183 ++++++
> > >>>>>  drivers/soc/visconti/dnn/hwd_dnn.h            |  68 +++
> > >>>>>  drivers/soc/visconti/dnn/hwd_dnn_reg.h        | 228
> ++++++++
> > >>>>>  drivers/soc/visconti/ipa_common.c             |  55 ++
> > >>>>>  drivers/soc/visconti/ipa_common.h             |  18 +
> > >>>>>  drivers/soc/visconti/uapi/dnn.h               |  77 +++
> > >>>>>  drivers/soc/visconti/uapi/ipa.h               |  88 +++
> > >>>>>  15 files changed, 1329 insertions(+)  create mode 100644
> > >>>>>
> > Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.
> > >>>>> ya ml  create mode 100644 drivers/soc/visconti/Kconfig  create
> > >>>>> mode
> > >>>>> 100644 drivers/soc/visconti/Makefile  create mode 100644
> > >>>>> drivers/soc/visconti/dnn/Makefile  create mode 100644
> > >>>>> drivers/soc/visconti/dnn/dnn.c  create mode 100644
> > >>>>> drivers/soc/visconti/dnn/hwd_dnn.c
> > >>>>>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.h
> > >>>>>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn_reg.h
> > >>>>>  create mode 100644 drivers/soc/visconti/ipa_common.c  create
> > mode
> > >>>>> 100644 drivers/soc/visconti/ipa_common.h  create mode 100644
> > >>>>> drivers/soc/visconti/uapi/dnn.h  create mode 100644
> > >>>>> drivers/soc/visconti/uapi/ipa.h
> > >>>>>

^ permalink raw reply	[flat|nested] 36+ messages in thread

* RE: [PATCH 0/4] Add Toshiba Visconti DNN image processing accelerator driver
@ 2022-07-12  5:01               ` yuji2.ishikawa
  0 siblings, 0 replies; 36+ messages in thread
From: yuji2.ishikawa @ 2022-07-12  5:01 UTC (permalink / raw)
  To: hverkuil, robh+dt, nobuhiro1.iwamatsu, sumit.semwal, christian.koenig
  Cc: linaro-mm-sig, dri-devel, linux-kernel, linux-arm-kernel, linux-media

Hi Hans,

I'm going to submit DNN driver (with misc driver style) again.
Updated version will include corrections suggested in reviews.

For example:
* apply checkpatch.pl --strict
* uppercase letters in function name -> make them lowercase
* use of integer types: uint32_t -> u32 ( _u32 in user API header )

Please let me know further actions which should be done before submission.

Regards,
	Yuji Ishikawa

> -----Original Message-----
> From: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> Sent: Tuesday, July 5, 2022 10:17 AM
> To: Hans Verkuil <hverkuil@xs4all.nl>; robh+dt@kernel.org; iwamatsu
> nobuhiro(岩松 信洋 □ＳＷＣ◯ＡＣＴ) <nobuhiro1.iwamatsu@toshiba.co.jp>;
> sumit.semwal@linaro.org; christian.koenig@amd.com
> Cc: linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
> linux-media@vger.kernel.org; dri-devel@lists.freedesktop.org;
> linaro-mm-sig@lists.linaro.org
> Subject: RE: [PATCH 0/4] Add Toshiba Visconti DNN image processing
> accelerator driver
> 
> Hi Hans,
> 
> Thank you for your advice.
> I understand that V4L2 M2M driver is recommended for a group including
> Affine and Pyramid.
> 
> As for DSPIF, our application SW engineer said that there is another version of
> firmware to handle neural network.
> Therefore, DSP can handle not only images, but also some array/list typed
> data.
> It would be better to handle DSPIF as a misc device as well as DNN.
> 
> It is still difficult for me to imagine a whole structure of M2M type driver and
> corresponding userland application.
> What do they look like? Is there any existing driver suitable for reference?
> 
> Let me think about a Pyramid HW which receives a planar (R/G/B as different
> planes, not in interleaved RGBRGB format) image, and yields 3 planar images.
> Is it covered by only 1 fd, or multiple fds are required?
> * A fd for Pyramid driver:
>   * OUTPUT queue for receiving a picture?
>     * OUTPUT or OUTPUT_MPLANE?
>     * Q: Typically, RGB image is handled with single plane buffer in V4L2. RGB
> images do not have fourcc for multi-planar format (while YUV images do).
>         * How should I explicitly request R/G/B planar buffer in V4L2
> semantics?
>   * CAPTURE queue for yielding a picture?
>     * CAPTURE or CAPTURE_MPLANE?
>     * Again: RGB interleaved vs R/G/B planar
>     * Q: If I want to capture multiple images (with different resolution) at a time,
> how should I do?
>         * Do I have to add other fds for 2nd, 3rd CAPTURE queue?
>         * Or, multiple images can be packed in the same CAPTURE buffer?
>         * Or, multiple images can be placed in CAPTURE_MPLANE buffer ?
>   * Compound control to receive a configuration.
> 
> Regards,
> 		Yuji
> 
> > -----Original Message-----
> > From: Hans Verkuil <hverkuil@xs4all.nl>
> > Sent: Wednesday, June 29, 2022 10:44 PM
> > To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> > <yuji2.ishikawa@toshiba.co.jp>; robh+dt@kernel.org; iwamatsu
> > nobuhiro(岩松
> > 信洋 □ＳＷＣ◯ＡＣＴ) <nobuhiro1.iwamatsu@toshiba.co.jp>;
> > sumit.semwal@linaro.org; christian.koenig@amd.com
> > Cc: linux-arm-kernel@lists.infradead.org;
> > linux-kernel@vger.kernel.org; linux-media@vger.kernel.org;
> > dri-devel@lists.freedesktop.org; linaro-mm-sig@lists.linaro.org
> > Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing
> > accelerator driver
> >
> > My apologies for the late reply...
> >
> > On 01/06/2022 03:40, yuji2.ishikawa@toshiba.co.jp wrote:
> > > Hi Hans,
> > >
> > > Thank you for your advice.
> > > I prepared some description of DNN accelerator and its usage.
> > >
> > > #### Handling memory blocks for Visconti5 accelerators
> > >
> > > Visconti5 Image-Processing-Accelerators do not have fine grained
> > > IOMMU,
> > as CPU have.
> > > Therefore, memory region to be passed to the accelerators should be
> > physically contiguous.
> > > We use DMA-BUF backed by CMA (Contiguous Memory Allocator) to
> > > allocate
> > memory regions for sharing between CPU/IPAs.
> > > Originally, in v4.19 based implementation, the ION allocator was
> > > used to
> > allocate DMA-BUF instances.
> > > For the latest implementation, DMA-BUF HEAPS is used.
> > >
> > > Two structure types are used to represent memory region passed to drivers.
> > > * struct drv_ipa_buffer_info
> > >   * to describe whole DMA-BUF instance
> > > * struct drv_ipa_addr
> > >   * to describe a memory region in a DMA-BUF instance
> > >
> > > for details, see usage sample of each IPA driver
> > >
> > >
> > > #### Image Processing Accelerators overview
> > >
> > > Visconti5 SoC has following image processing accererators
> > >
> > > * AFFINE: 1 input image, 1 output image;
> > Affine transform, Homography transform, Polynomial lens distortion,
> > LUT transform
> > > * DNN:    N input feature vector, N output feature vector;
> > Deep neural network operation
> > > * PYRAMID 3 input image, 3 * N output image;
> > Resize grayscale/color image with N different parameters
> > > * DSPIF:  M input image, N output image;
> > Various opeations on images
> > > * HOX:    1 input image (multi ROI), 1 input dictionary1 likelihood/feature
> > vector;  Extended Histogram of Oriented Gradient based pattern
> > matching
> > > * HAMAT:  2 input feature vectors: 1 output corrdinate vector;
> > Hamming distance matching for stereo vision
> > > * FLMAT:  3 input image, N input feature point, N output matched
> > > point;
> > Optical flow matching
> > > * SMLDB:  1 input image, N input feature point, N output feature
> > > vector;
> > Accelerated-KAZE feature descriptor accelerator
> > > * STMAT:  2 input image, 1 output disparity image;
> > Stereo disparity
> >
> > It's not really easy to decide what is best. I would say that if both
> > input and output are images (RGB, YUV, Grayscale), then a V4L2
> > memory-to-memory driver is what I would expect to see.
> >
> > Where that is not the case, then a more custom approach makes sense.
> >
> > In the list above I would put AFFINE, PYRAMID, DSPIF and possible
> > STMAT in the V4L2 driver group, and the others more as custom drivers.
> >
> > I think it also depends on how it is used: if a captured sensor image
> > is typically passed in for further processing, i.e. it is closely
> > related to the video ISP, then
> > V4L2 is a reasonable choice.
> >
> > A DNN driver, on the other hand, isn't using images at all, so for
> > that something like this driver makes sense.
> >
> > Regards,
> >
> > 	Hans
> >
> > >
> > > see [0] Fig 7.2.1 for block diagram (of prototype chip)
> > >
> > >
> > > #### DNN accelerator overview
> > >
> > > DNN accelerator is a proprietary CNN/DCNN processing accelerator
> > developed by Toshiba.
> > > Visconti5 SoC has 2 instances of DNN acclerator hardware.
> > > Users convert existing Caffe/ONNX models to Visconti compatible
> > > models
> > with an offline tool.
> > > A converted model "Configuration Binary" includes:
> > >   * instruction sequence for given network
> > >   * weight/bias information
> > >   * DMA configuration from/to global memory (for input/output
> > > feature)
> > >
> > > DNN acccelerator can handle either 1 plane or multiple ROIs at a single call.
> > >
> > > see [0] Fig 7.2.2 for block diagram of DNN accelerator
> > >
> > > CNN: Convolutional Neural Network
> > > DCNN: Deep Convolutional Neural Network
> > >
> > >
> > > #### Input / Output
> > >
> > > Input image or feature: base type is either of FP16, FP32, INT8,
> > > UINT8, INT16 Output feature vector:  base type is either of FP16,
> > > FP32, INT8, UINT8, INT16
> > >
> > > Input, Output, Weight, Bias can be placed on global memory and
> > loaded/stored with DMA within DNN accelerator.
> > > These data on global memory can be specified as either of:
> > >   * single address to point single data block
> > >   * list of address to point multiple data blocks (i.e. ROIs)
> > >
> > > DNN acclerator driver accepts an instance of "struct drv_dnn_descriptor"
> > which includes addresses of input/output features and a configuration
> binary.
> > >
> > >
> > > #### Descriptor Builder at userland
> > >
> > > Following APIs are provided to build a descriptor instance at userland.
> > >
> > > /* defined in drv_dnn_util.h */
> > > int32_t drv_DNN_config_descript_init(struct drv_dnn_descriptor
> > > *desc, struct drv_ipa_buffer_info *buffer, int32_t buffer_num);
> > > int32_t
> > drv_DNN_config_exec_configuration(struct drv_dnn_descriptor *desc,
> > const void *configuration_binary,
> > >                                           struct drv_ipa_addr
> > configuration_binary_addr, struct drv_ipa_addr *src_list,
> > >                                           struct drv_ipa_addr
> > > *dst_list,
> > int32_t list_num, struct drv_ipa_addr temporary_addr,
> > >                                           int32_t temporary_size);
> > > int32_t drv_DNN_config_descript_finalize(struct drv_dnn_descriptor
> > > *desc);
> > >
> > > struct drv_dnn_descriptor is defined in drivers/soc/visconti/uapi/dnn.h.
> > > I think this header should be placed anywhere else to be collected
> > > on "make
> > headers_install" action of kernel building.
> > >
> > >
> > > #### Usage sample (without error handlers)
> > >
> > >     #include <linux/dma-heap.h>
> > >     #include "drv_ipa.h"
> > >     #include "drv_dnn.h"
> > >     #include "drv_dnn_util.h"
> > >
> > >     int allocate_buffer(int fd_heap, int size)
> > >     {
> > >         struct dma_heap_allocation_data heap_data_in={0};
> > >         int ret;
> > >
> > >         heap_data_in.len = ROUNDUP_POW2(size);
> > >         heap_data_in.fd_flags = O_RDWR | O_CLOEXEC;
> > >
> > >         ret = ioctl(fd_heap, DMA_HEAP_IOCTL_ALLOC, &heap_data_in);
> > >         if (ret <0)
> > >             return -1;
> > >         else
> > >             return heap_data_in.fd;
> > >     }
> > >
> > >     void dnn_sample(int fd_dnn, int fd_conf, int fd_src, int fd_dst,
> > > int
> > fd_temp)
> > >     {
> > >         int32_t ret;
> > >         struct drv_ipa_buffer_info bufinfo[4] = {
> > >
> > {.fd=fd_conf, .coherent=true, .direction=DRV_IPA_DIR_TO_DEVICE},
> > >
> > {.fd=fd_src,  .coherent=true, .direction=DRV_IPA_DIR_TO_DEVICE},
> > >
> > {.fd=fd_dst,  .coherent=true, .direction=DRV_IPA_DIR_FROM_DEVICE},
> > >
> > {.fd=fd_temp, .coherent=true, .direction=DRV_IPA_DIR_FROM_DEVICE},
> > >         };
> > >         struct drv_ipa_addr conf_addr = {.buffer_index=0, .offset=0};
> > >         struct drv_ipa_addr src_addr  = {.buffer_index=1, .offset=0};
> > >         struct drv_ipa_addr dst_addr  = {.buffer_index=2, .offset=0};
> > >         struct drv_ipa_addr temp_addr = {.buffer_index=3, .offset=0};
> > >         struct drv_dnn_descriptor desc;
> > >
> > >         struct drv_ipa_addr src_list[] = {src_addr};
> > >         struct drv_ipa_addr dst_list[] = {dst_addr};
> > >
> > >         uint8_t *config = (uint8_t*)mmap(NULL, DNN_CONF_BIN_SIZE,
> > > PROT_READ, MAP_SHARED, fd_conf, 0);
> > >
> > >         drv_DNN_config_descript_init(&desc, bufinfo, 4);
> > >         drv_DNN_config_exec_configuration(&desc, config, conf_addr,
> > src_list, dst_list, 1, temp_addr, TEMP_BUF_SIZE);
> > >         drv_DNN_config_descript_finalize(&desc);
> > >
> > >         ioctl(fd_dnn, IOC_IPA_START, &desc);
> > >
> > >         {
> > >             struct pollfd fds[] =
> > {.fd=fd_dnn, .events=POLL_IN, .revents=0};
> > >             poll(fds, 1, 1000);
> > >         }
> > >     }
> > >
> > >     void sample()
> > >     {
> > >         int fd_dnn, fd_heap, fd_conf, fd_src, fd_dst, fd_temp;
> > >
> > >         fd_dnn = open("/dev/dnn0", O_RDWR);
> > >         fd_heap = open("/dev/dma_heap/linux,cma", O_RDWR);
> > >         fd_conf = allocate_buffer(fd_heap,
> DNN_CONF_BIN_ALLOC_SIZE);
> > >         fd_src  = allocate_buffer(fd_heap, INPUT_IMG_ALLOC_SIZE);
> > >         fd_dst  = allocate_buffer(fd_heap, OUTPUT_IMG_ALLOC_SIZE);
> > >         fd_temp = allocate_buffer(fd_heap, TEMP_BUF_ALLOC_SIZE);
> > >
> > >         /* fill in input image and configuration here */
> > >
> > >         dnn_sample(fd_dnn, fd_conf, fd_src, fd_dst, fd_temp);
> > >
> > >         ...
> > >     };
> > >
> > >
> > > #### Reference
> > >
> > > * [0]
> >
> https://toshiba.semicon-storage.com/content/dam/toshiba-ss-v2/master/e
> > n /company/technical-review/pdf/technical-review-18_e.pdf
> > >   * Fig 7.2.1 shows the whole architecture of prototype chip
> > >   * Fig 7.2.2 shows the architecture of DNN accelerator
> > >
> > >
> > > Regards,
> > > Yuji
> > >
> > >> -----Original Message-----
> > >> From: Hans Verkuil <hverkuil@xs4all.nl>
> > >> Sent: Friday, May 20, 2022 7:03 PM
> > >> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> > >> <yuji2.ishikawa@toshiba.co.jp>; robh+dt@kernel.org; iwamatsu
> > >> nobuhiro(岩松
> > >> 信洋 □ＳＷＣ◯ＡＣＴ) <nobuhiro1.iwamatsu@toshiba.co.jp>;
> > >> sumit.semwal@linaro.org; christian.koenig@amd.com
> > >> Cc: linux-arm-kernel@lists.infradead.org;
> > >> linux-kernel@vger.kernel.org; linux-media@vger.kernel.org;
> > >> dri-devel@lists.freedesktop.org; linaro-mm-sig@lists.linaro.org
> > >> Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing
> > >> accelerator driver
> > >>
> > >> Hi Yuji,
> > >>
> > >> On 5/20/22 11:48, yuji2.ishikawa@toshiba.co.jp wrote:
> > >>> Hi Hans,
> > >>>
> > >>> Thank you for your comment.
> > >>> I agree that this submission lacks documents sharing basic idea of
> > >>> the
> > >> accelerators; what do they accept and what do they yield.
> > >>> Where can I put a new document? Can I put it as a comment in a
> > >>> source? Can
> > >> I add a file under Documentation/misc-devices directory?
> > >>
> > >> Start with explaining it by replying to this mail. Without knowing
> > >> anything about the hardware, it is difficult to say what the best
> > >> place is. Usually it is either the public API header, or somewhere
> > >> in
> > Documentation.
> > >>
> > >> The first step is to have a better understanding of the Visconti
> > >> image hardware and to see what the best subsystem would be to
> > >> support
> > that hardware.
> > >>
> > >> Regards,
> > >>
> > >> 	Hans
> > >>
> > >>>
> > >>> Thanks,
> > >>> Yuji Ishikawa
> > >>>
> > >>>> -----Original Message-----
> > >>>> From: Hans Verkuil <hverkuil@xs4all.nl>
> > >>>> Sent: Thursday, May 12, 2022 8:15 PM
> > >>>> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> > >>>> <yuji2.ishikawa@toshiba.co.jp>; Rob Herring <robh+dt@kernel.org>;
> > >>>> iwamatsu nobuhiro(岩松 信洋 □ＳＷＣ◯ＡＣＴ)
> > >>>> <nobuhiro1.iwamatsu@toshiba.co.jp>; Sumit Semwal
> > >>>> <sumit.semwal@linaro.org>; Christian König
> > >> <christian.koenig@amd.com>
> > >>>> Cc: linux-arm-kernel@lists.infradead.org;
> > >>>> linux-kernel@vger.kernel.org; linux-media@vger.kernel.org;
> > >>>> dri-devel@lists.freedesktop.org; linaro-mm-sig@lists.linaro.org
> > >>>> Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image
> > >>>> processing accelerator driver
> > >>>>
> > >>>> Hi Yuji,
> > >>>>
> > >>>> On 4/28/22 15:11, Yuji Ishikawa wrote:
> > >>>>> This series is the DNN image processing accelerator driver for
> > >>>>> Toshiba's ARM
> > >>>> SoC, Visconti[0].
> > >>>>> This provides DT binding documentation, device driver,
> > >>>>> MAINTAINER
> > >> files.
> > >>>>>
> > >>>>> The second patch "soc: visconti: Add Toshiba Visconti image
> > >>>>> processing
> > >>>> accelerator common source"
> > >>>>> and the fourth patch "MAINTAINERS: ..." are the same as the ones
> > >>>>> in the
> > >>>> preceding post for affine driver.
> > >>>>
> > >>>> There appears to be no documentation whatsoever, unless I am
> > >>>> missing something.
> > >>>>
> > >>>> How is the uAPI supposed to be used? What does it do? What
> > >>>> formats does it accept or produce?
> > >>>>
> > >>>> If this processes images, then (as Laurent mentioned) this is
> > >>>> more suitable as a
> > >>>> V4L2 mem2mem driver.
> > >>>>
> > >>>> See
> > >>>> https://linuxtv.org/downloads/v4l-dvb-apis-new/userspace-api/v4l/
> > >>>> de
> > >>>> v-
> > >>>> me
> > >>>> m2mem.html
> > >>>> and the many drivers in drivers/media that use it (git grep
> > >> v4l2-mem2mem.h).
> > >>>>
> > >>>> But without any explanation whatsoever I have no idea what does
> > >>>> or does not make sense.
> > >>>>
> > >>>> Regards,
> > >>>>
> > >>>> 	Hans
> > >>>>
> > >>>>>
> > >>>>> Best regards,
> > >>>>> Yuji
> > >>>>>
> > >>>>> [0]:
> > >>>>>
> > >>>>
> > >>
> > https://toshiba.semicon-storage.com/ap-en/semiconductor/product/image
> > >>>> -
> > >>>>> recognition-processors-visconti.html
> > >>>>>
> > >>>>> Yuji Ishikawa (4):
> > >>>>>   dt-bindings: soc: visconti: Add Toshiba Visconti DNN image
> > processing
> > >>>>>     accelerator bindings
> > >>>>>   soc: visconti: Add Toshiba Visconti image processing accelerator
> > >>>>>     common source
> > >>>>>   soc: visconti: Add Toshiba Visconti DNN image processing
> > accelerator
> > >>>>>   MAINTAINERS: Add entries for Toshiba Visconti DNN image
> > processing
> > >>>>>     accelerator
> > >>>>>
> > >>>>>  .../soc/visconti/toshiba,visconti-dnn.yaml    |  54 ++
> > >>>>>  MAINTAINERS                                   |   2 +
> > >>>>>  drivers/soc/Kconfig                           |   1 +
> > >>>>>  drivers/soc/Makefile                          |   1 +
> > >>>>>  drivers/soc/visconti/Kconfig                  |   7 +
> > >>>>>  drivers/soc/visconti/Makefile                 |   8 +
> > >>>>>  drivers/soc/visconti/dnn/Makefile             |   6 +
> > >>>>>  drivers/soc/visconti/dnn/dnn.c                | 533
> > >>>> ++++++++++++++++++
> > >>>>>  drivers/soc/visconti/dnn/hwd_dnn.c            | 183 ++++++
> > >>>>>  drivers/soc/visconti/dnn/hwd_dnn.h            |  68 +++
> > >>>>>  drivers/soc/visconti/dnn/hwd_dnn_reg.h        | 228
> ++++++++
> > >>>>>  drivers/soc/visconti/ipa_common.c             |  55 ++
> > >>>>>  drivers/soc/visconti/ipa_common.h             |  18 +
> > >>>>>  drivers/soc/visconti/uapi/dnn.h               |  77 +++
> > >>>>>  drivers/soc/visconti/uapi/ipa.h               |  88 +++
> > >>>>>  15 files changed, 1329 insertions(+)  create mode 100644
> > >>>>>
> > Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.
> > >>>>> ya ml  create mode 100644 drivers/soc/visconti/Kconfig  create
> > >>>>> mode
> > >>>>> 100644 drivers/soc/visconti/Makefile  create mode 100644
> > >>>>> drivers/soc/visconti/dnn/Makefile  create mode 100644
> > >>>>> drivers/soc/visconti/dnn/dnn.c  create mode 100644
> > >>>>> drivers/soc/visconti/dnn/hwd_dnn.c
> > >>>>>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.h
> > >>>>>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn_reg.h
> > >>>>>  create mode 100644 drivers/soc/visconti/ipa_common.c  create
> > mode
> > >>>>> 100644 drivers/soc/visconti/ipa_common.h  create mode 100644
> > >>>>> drivers/soc/visconti/uapi/dnn.h  create mode 100644
> > >>>>> drivers/soc/visconti/uapi/ipa.h
> > >>>>>

^ permalink raw reply	[flat|nested] 36+ messages in thread

* RE: [PATCH 0/4] Add Toshiba Visconti DNN image processing accelerator driver
@ 2022-07-12  5:01               ` yuji2.ishikawa
  0 siblings, 0 replies; 36+ messages in thread
From: yuji2.ishikawa @ 2022-07-12  5:01 UTC (permalink / raw)
  To: hverkuil, robh+dt, nobuhiro1.iwamatsu, sumit.semwal, christian.koenig
  Cc: linux-arm-kernel, linux-kernel, linux-media, dri-devel, linaro-mm-sig

Hi Hans,

I'm going to submit DNN driver (with misc driver style) again.
Updated version will include corrections suggested in reviews.

For example:
* apply checkpatch.pl --strict
* uppercase letters in function name -> make them lowercase
* use of integer types: uint32_t -> u32 ( _u32 in user API header )

Please let me know further actions which should be done before submission.

Regards,
	Yuji Ishikawa

> -----Original Message-----
> From: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> Sent: Tuesday, July 5, 2022 10:17 AM
> To: Hans Verkuil <hverkuil@xs4all.nl>; robh+dt@kernel.org; iwamatsu
> nobuhiro(岩松 信洋 □ＳＷＣ◯ＡＣＴ) <nobuhiro1.iwamatsu@toshiba.co.jp>;
> sumit.semwal@linaro.org; christian.koenig@amd.com
> Cc: linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org;
> linux-media@vger.kernel.org; dri-devel@lists.freedesktop.org;
> linaro-mm-sig@lists.linaro.org
> Subject: RE: [PATCH 0/4] Add Toshiba Visconti DNN image processing
> accelerator driver
> 
> Hi Hans,
> 
> Thank you for your advice.
> I understand that V4L2 M2M driver is recommended for a group including
> Affine and Pyramid.
> 
> As for DSPIF, our application SW engineer said that there is another version of
> firmware to handle neural network.
> Therefore, DSP can handle not only images, but also some array/list typed
> data.
> It would be better to handle DSPIF as a misc device as well as DNN.
> 
> It is still difficult for me to imagine a whole structure of M2M type driver and
> corresponding userland application.
> What do they look like? Is there any existing driver suitable for reference?
> 
> Let me think about a Pyramid HW which receives a planar (R/G/B as different
> planes, not in interleaved RGBRGB format) image, and yields 3 planar images.
> Is it covered by only 1 fd, or multiple fds are required?
> * A fd for Pyramid driver:
>   * OUTPUT queue for receiving a picture?
>     * OUTPUT or OUTPUT_MPLANE?
>     * Q: Typically, RGB image is handled with single plane buffer in V4L2. RGB
> images do not have fourcc for multi-planar format (while YUV images do).
>         * How should I explicitly request R/G/B planar buffer in V4L2
> semantics?
>   * CAPTURE queue for yielding a picture?
>     * CAPTURE or CAPTURE_MPLANE?
>     * Again: RGB interleaved vs R/G/B planar
>     * Q: If I want to capture multiple images (with different resolution) at a time,
> how should I do?
>         * Do I have to add other fds for 2nd, 3rd CAPTURE queue?
>         * Or, multiple images can be packed in the same CAPTURE buffer?
>         * Or, multiple images can be placed in CAPTURE_MPLANE buffer ?
>   * Compound control to receive a configuration.
> 
> Regards,
> 		Yuji
> 
> > -----Original Message-----
> > From: Hans Verkuil <hverkuil@xs4all.nl>
> > Sent: Wednesday, June 29, 2022 10:44 PM
> > To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> > <yuji2.ishikawa@toshiba.co.jp>; robh+dt@kernel.org; iwamatsu
> > nobuhiro(岩松
> > 信洋 □ＳＷＣ◯ＡＣＴ) <nobuhiro1.iwamatsu@toshiba.co.jp>;
> > sumit.semwal@linaro.org; christian.koenig@amd.com
> > Cc: linux-arm-kernel@lists.infradead.org;
> > linux-kernel@vger.kernel.org; linux-media@vger.kernel.org;
> > dri-devel@lists.freedesktop.org; linaro-mm-sig@lists.linaro.org
> > Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing
> > accelerator driver
> >
> > My apologies for the late reply...
> >
> > On 01/06/2022 03:40, yuji2.ishikawa@toshiba.co.jp wrote:
> > > Hi Hans,
> > >
> > > Thank you for your advice.
> > > I prepared some description of DNN accelerator and its usage.
> > >
> > > #### Handling memory blocks for Visconti5 accelerators
> > >
> > > Visconti5 Image-Processing-Accelerators do not have fine grained
> > > IOMMU,
> > as CPU have.
> > > Therefore, memory region to be passed to the accelerators should be
> > physically contiguous.
> > > We use DMA-BUF backed by CMA (Contiguous Memory Allocator) to
> > > allocate
> > memory regions for sharing between CPU/IPAs.
> > > Originally, in v4.19 based implementation, the ION allocator was
> > > used to
> > allocate DMA-BUF instances.
> > > For the latest implementation, DMA-BUF HEAPS is used.
> > >
> > > Two structure types are used to represent memory region passed to drivers.
> > > * struct drv_ipa_buffer_info
> > >   * to describe whole DMA-BUF instance
> > > * struct drv_ipa_addr
> > >   * to describe a memory region in a DMA-BUF instance
> > >
> > > for details, see usage sample of each IPA driver
> > >
> > >
> > > #### Image Processing Accelerators overview
> > >
> > > Visconti5 SoC has following image processing accererators
> > >
> > > * AFFINE: 1 input image, 1 output image;
> > Affine transform, Homography transform, Polynomial lens distortion,
> > LUT transform
> > > * DNN:    N input feature vector, N output feature vector;
> > Deep neural network operation
> > > * PYRAMID 3 input image, 3 * N output image;
> > Resize grayscale/color image with N different parameters
> > > * DSPIF:  M input image, N output image;
> > Various opeations on images
> > > * HOX:    1 input image (multi ROI), 1 input dictionary1 likelihood/feature
> > vector;  Extended Histogram of Oriented Gradient based pattern
> > matching
> > > * HAMAT:  2 input feature vectors: 1 output corrdinate vector;
> > Hamming distance matching for stereo vision
> > > * FLMAT:  3 input image, N input feature point, N output matched
> > > point;
> > Optical flow matching
> > > * SMLDB:  1 input image, N input feature point, N output feature
> > > vector;
> > Accelerated-KAZE feature descriptor accelerator
> > > * STMAT:  2 input image, 1 output disparity image;
> > Stereo disparity
> >
> > It's not really easy to decide what is best. I would say that if both
> > input and output are images (RGB, YUV, Grayscale), then a V4L2
> > memory-to-memory driver is what I would expect to see.
> >
> > Where that is not the case, then a more custom approach makes sense.
> >
> > In the list above I would put AFFINE, PYRAMID, DSPIF and possible
> > STMAT in the V4L2 driver group, and the others more as custom drivers.
> >
> > I think it also depends on how it is used: if a captured sensor image
> > is typically passed in for further processing, i.e. it is closely
> > related to the video ISP, then
> > V4L2 is a reasonable choice.
> >
> > A DNN driver, on the other hand, isn't using images at all, so for
> > that something like this driver makes sense.
> >
> > Regards,
> >
> > 	Hans
> >
> > >
> > > see [0] Fig 7.2.1 for block diagram (of prototype chip)
> > >
> > >
> > > #### DNN accelerator overview
> > >
> > > DNN accelerator is a proprietary CNN/DCNN processing accelerator
> > developed by Toshiba.
> > > Visconti5 SoC has 2 instances of DNN acclerator hardware.
> > > Users convert existing Caffe/ONNX models to Visconti compatible
> > > models
> > with an offline tool.
> > > A converted model "Configuration Binary" includes:
> > >   * instruction sequence for given network
> > >   * weight/bias information
> > >   * DMA configuration from/to global memory (for input/output
> > > feature)
> > >
> > > DNN acccelerator can handle either 1 plane or multiple ROIs at a single call.
> > >
> > > see [0] Fig 7.2.2 for block diagram of DNN accelerator
> > >
> > > CNN: Convolutional Neural Network
> > > DCNN: Deep Convolutional Neural Network
> > >
> > >
> > > #### Input / Output
> > >
> > > Input image or feature: base type is either of FP16, FP32, INT8,
> > > UINT8, INT16 Output feature vector:  base type is either of FP16,
> > > FP32, INT8, UINT8, INT16
> > >
> > > Input, Output, Weight, Bias can be placed on global memory and
> > loaded/stored with DMA within DNN accelerator.
> > > These data on global memory can be specified as either of:
> > >   * single address to point single data block
> > >   * list of address to point multiple data blocks (i.e. ROIs)
> > >
> > > DNN acclerator driver accepts an instance of "struct drv_dnn_descriptor"
> > which includes addresses of input/output features and a configuration
> binary.
> > >
> > >
> > > #### Descriptor Builder at userland
> > >
> > > Following APIs are provided to build a descriptor instance at userland.
> > >
> > > /* defined in drv_dnn_util.h */
> > > int32_t drv_DNN_config_descript_init(struct drv_dnn_descriptor
> > > *desc, struct drv_ipa_buffer_info *buffer, int32_t buffer_num);
> > > int32_t
> > drv_DNN_config_exec_configuration(struct drv_dnn_descriptor *desc,
> > const void *configuration_binary,
> > >                                           struct drv_ipa_addr
> > configuration_binary_addr, struct drv_ipa_addr *src_list,
> > >                                           struct drv_ipa_addr
> > > *dst_list,
> > int32_t list_num, struct drv_ipa_addr temporary_addr,
> > >                                           int32_t temporary_size);
> > > int32_t drv_DNN_config_descript_finalize(struct drv_dnn_descriptor
> > > *desc);
> > >
> > > struct drv_dnn_descriptor is defined in drivers/soc/visconti/uapi/dnn.h.
> > > I think this header should be placed anywhere else to be collected
> > > on "make
> > headers_install" action of kernel building.
> > >
> > >
> > > #### Usage sample (without error handlers)
> > >
> > >     #include <linux/dma-heap.h>
> > >     #include "drv_ipa.h"
> > >     #include "drv_dnn.h"
> > >     #include "drv_dnn_util.h"
> > >
> > >     int allocate_buffer(int fd_heap, int size)
> > >     {
> > >         struct dma_heap_allocation_data heap_data_in={0};
> > >         int ret;
> > >
> > >         heap_data_in.len = ROUNDUP_POW2(size);
> > >         heap_data_in.fd_flags = O_RDWR | O_CLOEXEC;
> > >
> > >         ret = ioctl(fd_heap, DMA_HEAP_IOCTL_ALLOC, &heap_data_in);
> > >         if (ret <0)
> > >             return -1;
> > >         else
> > >             return heap_data_in.fd;
> > >     }
> > >
> > >     void dnn_sample(int fd_dnn, int fd_conf, int fd_src, int fd_dst,
> > > int
> > fd_temp)
> > >     {
> > >         int32_t ret;
> > >         struct drv_ipa_buffer_info bufinfo[4] = {
> > >
> > {.fd=fd_conf, .coherent=true, .direction=DRV_IPA_DIR_TO_DEVICE},
> > >
> > {.fd=fd_src,  .coherent=true, .direction=DRV_IPA_DIR_TO_DEVICE},
> > >
> > {.fd=fd_dst,  .coherent=true, .direction=DRV_IPA_DIR_FROM_DEVICE},
> > >
> > {.fd=fd_temp, .coherent=true, .direction=DRV_IPA_DIR_FROM_DEVICE},
> > >         };
> > >         struct drv_ipa_addr conf_addr = {.buffer_index=0, .offset=0};
> > >         struct drv_ipa_addr src_addr  = {.buffer_index=1, .offset=0};
> > >         struct drv_ipa_addr dst_addr  = {.buffer_index=2, .offset=0};
> > >         struct drv_ipa_addr temp_addr = {.buffer_index=3, .offset=0};
> > >         struct drv_dnn_descriptor desc;
> > >
> > >         struct drv_ipa_addr src_list[] = {src_addr};
> > >         struct drv_ipa_addr dst_list[] = {dst_addr};
> > >
> > >         uint8_t *config = (uint8_t*)mmap(NULL, DNN_CONF_BIN_SIZE,
> > > PROT_READ, MAP_SHARED, fd_conf, 0);
> > >
> > >         drv_DNN_config_descript_init(&desc, bufinfo, 4);
> > >         drv_DNN_config_exec_configuration(&desc, config, conf_addr,
> > src_list, dst_list, 1, temp_addr, TEMP_BUF_SIZE);
> > >         drv_DNN_config_descript_finalize(&desc);
> > >
> > >         ioctl(fd_dnn, IOC_IPA_START, &desc);
> > >
> > >         {
> > >             struct pollfd fds[] =
> > {.fd=fd_dnn, .events=POLL_IN, .revents=0};
> > >             poll(fds, 1, 1000);
> > >         }
> > >     }
> > >
> > >     void sample()
> > >     {
> > >         int fd_dnn, fd_heap, fd_conf, fd_src, fd_dst, fd_temp;
> > >
> > >         fd_dnn = open("/dev/dnn0", O_RDWR);
> > >         fd_heap = open("/dev/dma_heap/linux,cma", O_RDWR);
> > >         fd_conf = allocate_buffer(fd_heap,
> DNN_CONF_BIN_ALLOC_SIZE);
> > >         fd_src  = allocate_buffer(fd_heap, INPUT_IMG_ALLOC_SIZE);
> > >         fd_dst  = allocate_buffer(fd_heap, OUTPUT_IMG_ALLOC_SIZE);
> > >         fd_temp = allocate_buffer(fd_heap, TEMP_BUF_ALLOC_SIZE);
> > >
> > >         /* fill in input image and configuration here */
> > >
> > >         dnn_sample(fd_dnn, fd_conf, fd_src, fd_dst, fd_temp);
> > >
> > >         ...
> > >     };
> > >
> > >
> > > #### Reference
> > >
> > > * [0]
> >
> https://toshiba.semicon-storage.com/content/dam/toshiba-ss-v2/master/e
> > n /company/technical-review/pdf/technical-review-18_e.pdf
> > >   * Fig 7.2.1 shows the whole architecture of prototype chip
> > >   * Fig 7.2.2 shows the architecture of DNN accelerator
> > >
> > >
> > > Regards,
> > > Yuji
> > >
> > >> -----Original Message-----
> > >> From: Hans Verkuil <hverkuil@xs4all.nl>
> > >> Sent: Friday, May 20, 2022 7:03 PM
> > >> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> > >> <yuji2.ishikawa@toshiba.co.jp>; robh+dt@kernel.org; iwamatsu
> > >> nobuhiro(岩松
> > >> 信洋 □ＳＷＣ◯ＡＣＴ) <nobuhiro1.iwamatsu@toshiba.co.jp>;
> > >> sumit.semwal@linaro.org; christian.koenig@amd.com
> > >> Cc: linux-arm-kernel@lists.infradead.org;
> > >> linux-kernel@vger.kernel.org; linux-media@vger.kernel.org;
> > >> dri-devel@lists.freedesktop.org; linaro-mm-sig@lists.linaro.org
> > >> Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image processing
> > >> accelerator driver
> > >>
> > >> Hi Yuji,
> > >>
> > >> On 5/20/22 11:48, yuji2.ishikawa@toshiba.co.jp wrote:
> > >>> Hi Hans,
> > >>>
> > >>> Thank you for your comment.
> > >>> I agree that this submission lacks documents sharing basic idea of
> > >>> the
> > >> accelerators; what do they accept and what do they yield.
> > >>> Where can I put a new document? Can I put it as a comment in a
> > >>> source? Can
> > >> I add a file under Documentation/misc-devices directory?
> > >>
> > >> Start with explaining it by replying to this mail. Without knowing
> > >> anything about the hardware, it is difficult to say what the best
> > >> place is. Usually it is either the public API header, or somewhere
> > >> in
> > Documentation.
> > >>
> > >> The first step is to have a better understanding of the Visconti
> > >> image hardware and to see what the best subsystem would be to
> > >> support
> > that hardware.
> > >>
> > >> Regards,
> > >>
> > >> 	Hans
> > >>
> > >>>
> > >>> Thanks,
> > >>> Yuji Ishikawa
> > >>>
> > >>>> -----Original Message-----
> > >>>> From: Hans Verkuil <hverkuil@xs4all.nl>
> > >>>> Sent: Thursday, May 12, 2022 8:15 PM
> > >>>> To: ishikawa yuji(石川 悠司 ○ＲＤＣ□ＡＩＴＣ○ＥＡ開)
> > >>>> <yuji2.ishikawa@toshiba.co.jp>; Rob Herring <robh+dt@kernel.org>;
> > >>>> iwamatsu nobuhiro(岩松 信洋 □ＳＷＣ◯ＡＣＴ)
> > >>>> <nobuhiro1.iwamatsu@toshiba.co.jp>; Sumit Semwal
> > >>>> <sumit.semwal@linaro.org>; Christian König
> > >> <christian.koenig@amd.com>
> > >>>> Cc: linux-arm-kernel@lists.infradead.org;
> > >>>> linux-kernel@vger.kernel.org; linux-media@vger.kernel.org;
> > >>>> dri-devel@lists.freedesktop.org; linaro-mm-sig@lists.linaro.org
> > >>>> Subject: Re: [PATCH 0/4] Add Toshiba Visconti DNN image
> > >>>> processing accelerator driver
> > >>>>
> > >>>> Hi Yuji,
> > >>>>
> > >>>> On 4/28/22 15:11, Yuji Ishikawa wrote:
> > >>>>> This series is the DNN image processing accelerator driver for
> > >>>>> Toshiba's ARM
> > >>>> SoC, Visconti[0].
> > >>>>> This provides DT binding documentation, device driver,
> > >>>>> MAINTAINER
> > >> files.
> > >>>>>
> > >>>>> The second patch "soc: visconti: Add Toshiba Visconti image
> > >>>>> processing
> > >>>> accelerator common source"
> > >>>>> and the fourth patch "MAINTAINERS: ..." are the same as the ones
> > >>>>> in the
> > >>>> preceding post for affine driver.
> > >>>>
> > >>>> There appears to be no documentation whatsoever, unless I am
> > >>>> missing something.
> > >>>>
> > >>>> How is the uAPI supposed to be used? What does it do? What
> > >>>> formats does it accept or produce?
> > >>>>
> > >>>> If this processes images, then (as Laurent mentioned) this is
> > >>>> more suitable as a
> > >>>> V4L2 mem2mem driver.
> > >>>>
> > >>>> See
> > >>>> https://linuxtv.org/downloads/v4l-dvb-apis-new/userspace-api/v4l/
> > >>>> de
> > >>>> v-
> > >>>> me
> > >>>> m2mem.html
> > >>>> and the many drivers in drivers/media that use it (git grep
> > >> v4l2-mem2mem.h).
> > >>>>
> > >>>> But without any explanation whatsoever I have no idea what does
> > >>>> or does not make sense.
> > >>>>
> > >>>> Regards,
> > >>>>
> > >>>> 	Hans
> > >>>>
> > >>>>>
> > >>>>> Best regards,
> > >>>>> Yuji
> > >>>>>
> > >>>>> [0]:
> > >>>>>
> > >>>>
> > >>
> > https://toshiba.semicon-storage.com/ap-en/semiconductor/product/image
> > >>>> -
> > >>>>> recognition-processors-visconti.html
> > >>>>>
> > >>>>> Yuji Ishikawa (4):
> > >>>>>   dt-bindings: soc: visconti: Add Toshiba Visconti DNN image
> > processing
> > >>>>>     accelerator bindings
> > >>>>>   soc: visconti: Add Toshiba Visconti image processing accelerator
> > >>>>>     common source
> > >>>>>   soc: visconti: Add Toshiba Visconti DNN image processing
> > accelerator
> > >>>>>   MAINTAINERS: Add entries for Toshiba Visconti DNN image
> > processing
> > >>>>>     accelerator
> > >>>>>
> > >>>>>  .../soc/visconti/toshiba,visconti-dnn.yaml    |  54 ++
> > >>>>>  MAINTAINERS                                   |   2 +
> > >>>>>  drivers/soc/Kconfig                           |   1 +
> > >>>>>  drivers/soc/Makefile                          |   1 +
> > >>>>>  drivers/soc/visconti/Kconfig                  |   7 +
> > >>>>>  drivers/soc/visconti/Makefile                 |   8 +
> > >>>>>  drivers/soc/visconti/dnn/Makefile             |   6 +
> > >>>>>  drivers/soc/visconti/dnn/dnn.c                | 533
> > >>>> ++++++++++++++++++
> > >>>>>  drivers/soc/visconti/dnn/hwd_dnn.c            | 183 ++++++
> > >>>>>  drivers/soc/visconti/dnn/hwd_dnn.h            |  68 +++
> > >>>>>  drivers/soc/visconti/dnn/hwd_dnn_reg.h        | 228
> ++++++++
> > >>>>>  drivers/soc/visconti/ipa_common.c             |  55 ++
> > >>>>>  drivers/soc/visconti/ipa_common.h             |  18 +
> > >>>>>  drivers/soc/visconti/uapi/dnn.h               |  77 +++
> > >>>>>  drivers/soc/visconti/uapi/ipa.h               |  88 +++
> > >>>>>  15 files changed, 1329 insertions(+)  create mode 100644
> > >>>>>
> > Documentation/devicetree/bindings/soc/visconti/toshiba,visconti-dnn.
> > >>>>> ya ml  create mode 100644 drivers/soc/visconti/Kconfig  create
> > >>>>> mode
> > >>>>> 100644 drivers/soc/visconti/Makefile  create mode 100644
> > >>>>> drivers/soc/visconti/dnn/Makefile  create mode 100644
> > >>>>> drivers/soc/visconti/dnn/dnn.c  create mode 100644
> > >>>>> drivers/soc/visconti/dnn/hwd_dnn.c
> > >>>>>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn.h
> > >>>>>  create mode 100644 drivers/soc/visconti/dnn/hwd_dnn_reg.h
> > >>>>>  create mode 100644 drivers/soc/visconti/ipa_common.c  create
> > mode
> > >>>>> 100644 drivers/soc/visconti/ipa_common.h  create mode 100644
> > >>>>> drivers/soc/visconti/uapi/dnn.h  create mode 100644
> > >>>>> drivers/soc/visconti/uapi/ipa.h
> > >>>>>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 36+ messages in thread

end of thread, other threads:[~2022-07-12  5:08 UTC | newest]

Thread overview: 36+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-04-28 13:11 [PATCH 0/4] Add Toshiba Visconti DNN image processing accelerator driver Yuji Ishikawa
2022-04-28 13:11 ` Yuji Ishikawa
2022-04-28 13:11 ` Yuji Ishikawa
2022-04-28 13:11 ` [PATCH 1/4] dt-bindings: soc: visconti: Add Toshiba Visconti DNN image processing accelerator bindings Yuji Ishikawa
2022-04-28 13:11   ` Yuji Ishikawa
2022-04-28 13:11   ` Yuji Ishikawa
2022-04-28 13:11 ` [PATCH 2/4] soc: visconti: Add Toshiba Visconti image processing accelerator common source Yuji Ishikawa
2022-04-28 13:11   ` Yuji Ishikawa
2022-04-28 13:11   ` Yuji Ishikawa
2022-04-28 13:11 ` [PATCH 3/4] soc: visconti: Add Toshiba Visconti DNN image processing accelerator Yuji Ishikawa
2022-04-28 13:11   ` Yuji Ishikawa
2022-04-28 13:11   ` Yuji Ishikawa
2022-04-28 13:11 ` [PATCH 4/4] MAINTAINERS: Add entries for " Yuji Ishikawa
2022-04-28 13:11   ` Yuji Ishikawa
2022-04-28 13:11   ` Yuji Ishikawa
2022-05-12 11:14 ` [PATCH 0/4] Add Toshiba Visconti DNN image processing accelerator driver Hans Verkuil
2022-05-12 11:14   ` Hans Verkuil
2022-05-12 11:14   ` Hans Verkuil
2022-05-20  9:48   ` yuji2.ishikawa
2022-05-20  9:48     ` yuji2.ishikawa
2022-05-20  9:48     ` yuji2.ishikawa
2022-05-20 10:02     ` Hans Verkuil
2022-05-20 10:02       ` Hans Verkuil
2022-05-20 10:02       ` Hans Verkuil
2022-06-01  1:40       ` yuji2.ishikawa
2022-06-01  1:40         ` yuji2.ishikawa
2022-06-01  1:40         ` yuji2.ishikawa
2022-06-29 13:44         ` Hans Verkuil
2022-06-29 13:44           ` Hans Verkuil
2022-06-29 13:44           ` Hans Verkuil
2022-07-05  1:17           ` yuji2.ishikawa
2022-07-05  1:17             ` yuji2.ishikawa
2022-07-05  1:17             ` yuji2.ishikawa
2022-07-12  5:01             ` yuji2.ishikawa
2022-07-12  5:01               ` yuji2.ishikawa
2022-07-12  5:01               ` yuji2.ishikawa

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.