[PATCH 0/3] Add missing dt-binding properties for audio components on mt8192-asurada

[PATCH 0/3] Add missing dt-binding properties for audio components on mt8192-asurada

[Nícolas F. R. A. Prado]

These patches add properties that were missing on the dt-bindings of the
audio components used by mt8192-asurada. Namely the i2s-share
properties for the sound platform and the #sound-dai-cells on the
rt1015p and rt5682 codecs when they're referenced by the machine sound
node.


Nícolas F. R. A. Prado (3):
  ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties
  ASoC: dt-bindings: rt1015p: Add #sound-dai-cells
  ASoC: dt-bindings: rt5682: Add #sound-dai-cells

 Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml  | 5 +++++
 Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml | 3 +++
 Documentation/devicetree/bindings/sound/rt5682.txt           | 2 ++
 3 files changed, 10 insertions(+)

-- 
2.36.0

[PATCH 0/3] Add missing dt-binding properties for audio components on mt8192-asurada

[Nícolas F. R. A. Prado]

These patches add properties that were missing on the dt-bindings of the
audio components used by mt8192-asurada. Namely the i2s-share
properties for the sound platform and the #sound-dai-cells on the
rt1015p and rt5682 codecs when they're referenced by the machine sound
node.


Nícolas F. R. A. Prado (3):
  ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties
  ASoC: dt-bindings: rt1015p: Add #sound-dai-cells
  ASoC: dt-bindings: rt5682: Add #sound-dai-cells

 Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml  | 5 +++++
 Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml | 3 +++
 Documentation/devicetree/bindings/sound/rt5682.txt           | 2 ++
 3 files changed, 10 insertions(+)

-- 
2.36.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH 0/3] Add missing dt-binding properties for audio components on mt8192-asurada

[Nícolas F. R. A. Prado]

These patches add properties that were missing on the dt-bindings of the
audio components used by mt8192-asurada. Namely the i2s-share
properties for the sound platform and the #sound-dai-cells on the
rt1015p and rt5682 codecs when they're referenced by the machine sound
node.


Nícolas F. R. A. Prado (3):
  ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties
  ASoC: dt-bindings: rt1015p: Add #sound-dai-cells
  ASoC: dt-bindings: rt5682: Add #sound-dai-cells

 Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml  | 5 +++++
 Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml | 3 +++
 Documentation/devicetree/bindings/sound/rt5682.txt           | 2 ++
 3 files changed, 10 insertions(+)

-- 
2.36.0

[PATCH 0/3] Add missing dt-binding properties for audio components on mt8192-asurada

[Nícolas F. R. A. Prado]

These patches add properties that were missing on the dt-bindings of the
audio components used by mt8192-asurada. Namely the i2s-share
properties for the sound platform and the #sound-dai-cells on the
rt1015p and rt5682 codecs when they're referenced by the machine sound
node.


Nícolas F. R. A. Prado (3):
  ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties
  ASoC: dt-bindings: rt1015p: Add #sound-dai-cells
  ASoC: dt-bindings: rt5682: Add #sound-dai-cells

 Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml  | 5 +++++
 Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml | 3 +++
 Documentation/devicetree/bindings/sound/rt5682.txt           | 2 ++
 3 files changed, 10 insertions(+)

-- 
2.36.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[Nícolas F. R. A. Prado]

The Mediatek AFE PCM controller for MT8192 allows sharing of an I2S bus
between two busses. Add a pattern for these properties in the
dt-binding.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>

---

 Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
index 7a25bc9b8060..5b03c8dbf318 100644
--- a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
+++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
@@ -54,6 +54,11 @@ properties:
       - const: aud_infra_clk
       - const: aud_infra_26m_clk
 
+patternProperties:
+  "^i2s[0-35-9]-share$":
+    description: Name of the I2S bus that is shared with this bus
+    pattern: "^I2S[0-35-9]$"
+
 required:
   - compatible
   - interrupts
-- 
2.36.0

[PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[Nícolas F. R. A. Prado]

The Mediatek AFE PCM controller for MT8192 allows sharing of an I2S bus
between two busses. Add a pattern for these properties in the
dt-binding.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>

---

 Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
index 7a25bc9b8060..5b03c8dbf318 100644
--- a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
+++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
@@ -54,6 +54,11 @@ properties:
       - const: aud_infra_clk
       - const: aud_infra_26m_clk
 
+patternProperties:
+  "^i2s[0-35-9]-share$":
+    description: Name of the I2S bus that is shared with this bus
+    pattern: "^I2S[0-35-9]$"
+
 required:
   - compatible
   - interrupts
-- 
2.36.0


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[Nícolas F. R. A. Prado]

The Mediatek AFE PCM controller for MT8192 allows sharing of an I2S bus
between two busses. Add a pattern for these properties in the
dt-binding.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>

---

 Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
index 7a25bc9b8060..5b03c8dbf318 100644
--- a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
+++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
@@ -54,6 +54,11 @@ properties:
       - const: aud_infra_clk
       - const: aud_infra_26m_clk
 
+patternProperties:
+  "^i2s[0-35-9]-share$":
+    description: Name of the I2S bus that is shared with this bus
+    pattern: "^I2S[0-35-9]$"
+
 required:
   - compatible
   - interrupts
-- 
2.36.0

[PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[Nícolas F. R. A. Prado]

The Mediatek AFE PCM controller for MT8192 allows sharing of an I2S bus
between two busses. Add a pattern for these properties in the
dt-binding.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>

---

 Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
index 7a25bc9b8060..5b03c8dbf318 100644
--- a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
+++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
@@ -54,6 +54,11 @@ properties:
       - const: aud_infra_clk
       - const: aud_infra_26m_clk
 
+patternProperties:
+  "^i2s[0-35-9]-share$":
+    description: Name of the I2S bus that is shared with this bus
+    pattern: "^I2S[0-35-9]$"
+
 required:
   - compatible
   - interrupts
-- 
2.36.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/3] ASoC: dt-bindings: rt1015p: Add #sound-dai-cells

[Nícolas F. R. A. Prado]

The rt1015p codec can be pointed to through a sound-dai property to be
used as part of a machine sound driver. dtc expects #sound-dai-cells to
be defined in the codec's node in those cases, so add it in the
dt-binding and set it to 0.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
---

 Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml b/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml
index fdb7f295ef2d..1d73204451b1 100644
--- a/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml
+++ b/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml
@@ -25,6 +25,9 @@ properties:
       0 means shut down; 1 means power on.
     maxItems: 1
 
+  "#sound-dai-cells":
+    const: 0
+
 required:
   - compatible
 
-- 
2.36.0

[PATCH 2/3] ASoC: dt-bindings: rt1015p: Add #sound-dai-cells

[Nícolas F. R. A. Prado]

The rt1015p codec can be pointed to through a sound-dai property to be
used as part of a machine sound driver. dtc expects #sound-dai-cells to
be defined in the codec's node in those cases, so add it in the
dt-binding and set it to 0.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
---

 Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml b/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml
index fdb7f295ef2d..1d73204451b1 100644
--- a/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml
+++ b/Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml
@@ -25,6 +25,9 @@ properties:
       0 means shut down; 1 means power on.
     maxItems: 1
 
+  "#sound-dai-cells":
+    const: 0
+
 required:
   - compatible
 
-- 
2.36.0

[PATCH 3/3] ASoC: dt-bindings: rt5682: Add #sound-dai-cells

[Nícolas F. R. A. Prado]

The rt5682 codec can be pointed to through a sound-dai property to be
used as part of a machine sound driver. dtc expects #sound-dai-cells to
be defined in the codec's node in those cases, so add it in the
dt-binding and set it to 0.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
---

 Documentation/devicetree/bindings/sound/rt5682.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/rt5682.txt b/Documentation/devicetree/bindings/sound/rt5682.txt
index cd8c53d8497e..c5f2b8febcee 100644
--- a/Documentation/devicetree/bindings/sound/rt5682.txt
+++ b/Documentation/devicetree/bindings/sound/rt5682.txt
@@ -46,6 +46,8 @@ Optional properties:
 
 - realtek,dmic-clk-driving-high : Set the high driving of the DMIC clock out.
 
+- #sound-dai-cells: Should be set to '<0>'.
+
 Pins on the device (for linking into audio routes) for RT5682:
 
   * DMIC L1
-- 
2.36.0

[PATCH 3/3] ASoC: dt-bindings: rt5682: Add #sound-dai-cells

[Nícolas F. R. A. Prado]

The rt5682 codec can be pointed to through a sound-dai property to be
used as part of a machine sound driver. dtc expects #sound-dai-cells to
be defined in the codec's node in those cases, so add it in the
dt-binding and set it to 0.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
---

 Documentation/devicetree/bindings/sound/rt5682.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/rt5682.txt b/Documentation/devicetree/bindings/sound/rt5682.txt
index cd8c53d8497e..c5f2b8febcee 100644
--- a/Documentation/devicetree/bindings/sound/rt5682.txt
+++ b/Documentation/devicetree/bindings/sound/rt5682.txt
@@ -46,6 +46,8 @@ Optional properties:
 
 - realtek,dmic-clk-driving-high : Set the high driving of the DMIC clock out.
 
+- #sound-dai-cells: Should be set to '<0>'.
+
 Pins on the device (for linking into audio routes) for RT5682:
 
   * DMIC L1
-- 
2.36.0

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[Rob Herring]

On Fri, Apr 29, 2022 at 04:30:37PM -0400, Nícolas F. R. A. Prado wrote:
> The Mediatek AFE PCM controller for MT8192 allows sharing of an I2S bus
> between two busses. Add a pattern for these properties in the
> dt-binding.
> 
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> 
> ---
> 
>  Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> index 7a25bc9b8060..5b03c8dbf318 100644
> --- a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> @@ -54,6 +54,11 @@ properties:
>        - const: aud_infra_clk
>        - const: aud_infra_26m_clk
>  
> +patternProperties:
> +  "^i2s[0-35-9]-share$":
> +    description: Name of the I2S bus that is shared with this bus
> +    pattern: "^I2S[0-35-9]$"

Why not a phandle to the the other bus? That would be the DT way to do 
it. But I'm not sure I really understand who is sharing what here.

> +
>  required:
>    - compatible
>    - interrupts
> -- 
> 2.36.0
> 
> 

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[Rob Herring]

On Fri, Apr 29, 2022 at 04:30:37PM -0400, Nícolas F. R. A. Prado wrote:
> The Mediatek AFE PCM controller for MT8192 allows sharing of an I2S bus
> between two busses. Add a pattern for these properties in the
> dt-binding.
> 
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> 
> ---
> 
>  Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> index 7a25bc9b8060..5b03c8dbf318 100644
> --- a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> @@ -54,6 +54,11 @@ properties:
>        - const: aud_infra_clk
>        - const: aud_infra_26m_clk
>  
> +patternProperties:
> +  "^i2s[0-35-9]-share$":
> +    description: Name of the I2S bus that is shared with this bus
> +    pattern: "^I2S[0-35-9]$"

Why not a phandle to the the other bus? That would be the DT way to do 
it. But I'm not sure I really understand who is sharing what here.

> +
>  required:
>    - compatible
>    - interrupts
> -- 
> 2.36.0
> 
> 

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[Rob Herring]

On Fri, Apr 29, 2022 at 04:30:37PM -0400, Nícolas F. R. A. Prado wrote:
> The Mediatek AFE PCM controller for MT8192 allows sharing of an I2S bus
> between two busses. Add a pattern for these properties in the
> dt-binding.
> 
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> 
> ---
> 
>  Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> index 7a25bc9b8060..5b03c8dbf318 100644
> --- a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> @@ -54,6 +54,11 @@ properties:
>        - const: aud_infra_clk
>        - const: aud_infra_26m_clk
>  
> +patternProperties:
> +  "^i2s[0-35-9]-share$":
> +    description: Name of the I2S bus that is shared with this bus
> +    pattern: "^I2S[0-35-9]$"

Why not a phandle to the the other bus? That would be the DT way to do 
it. But I'm not sure I really understand who is sharing what here.

> +
>  required:
>    - compatible
>    - interrupts
> -- 
> 2.36.0
> 
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[Rob Herring]

On Fri, Apr 29, 2022 at 04:30:37PM -0400, Nícolas F. R. A. Prado wrote:
> The Mediatek AFE PCM controller for MT8192 allows sharing of an I2S bus
> between two busses. Add a pattern for these properties in the
> dt-binding.
> 
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> 
> ---
> 
>  Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> index 7a25bc9b8060..5b03c8dbf318 100644
> --- a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> @@ -54,6 +54,11 @@ properties:
>        - const: aud_infra_clk
>        - const: aud_infra_26m_clk
>  
> +patternProperties:
> +  "^i2s[0-35-9]-share$":
> +    description: Name of the I2S bus that is shared with this bus
> +    pattern: "^I2S[0-35-9]$"

Why not a phandle to the the other bus? That would be the DT way to do 
it. But I'm not sure I really understand who is sharing what here.

> +
>  required:
>    - compatible
>    - interrupts
> -- 
> 2.36.0
> 
> 

Re: [PATCH 2/3] ASoC: dt-bindings: rt1015p: Add #sound-dai-cells

[Rob Herring]

On Fri, 29 Apr 2022 16:30:38 -0400, Nícolas F. R. A. Prado wrote:
> The rt1015p codec can be pointed to through a sound-dai property to be
> used as part of a machine sound driver. dtc expects #sound-dai-cells to
> be defined in the codec's node in those cases, so add it in the
> dt-binding and set it to 0.
> 
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> ---
> 
>  Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml | 3 +++
>  1 file changed, 3 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH 2/3] ASoC: dt-bindings: rt1015p: Add #sound-dai-cells

[Rob Herring]

On Fri, 29 Apr 2022 16:30:38 -0400, Nícolas F. R. A. Prado wrote:
> The rt1015p codec can be pointed to through a sound-dai property to be
> used as part of a machine sound driver. dtc expects #sound-dai-cells to
> be defined in the codec's node in those cases, so add it in the
> dt-binding and set it to 0.
> 
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> ---
> 
>  Documentation/devicetree/bindings/sound/realtek,rt1015p.yaml | 3 +++
>  1 file changed, 3 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH 3/3] ASoC: dt-bindings: rt5682: Add #sound-dai-cells

[Rob Herring]

On Fri, 29 Apr 2022 16:30:39 -0400, Nícolas F. R. A. Prado wrote:
> The rt5682 codec can be pointed to through a sound-dai property to be
> used as part of a machine sound driver. dtc expects #sound-dai-cells to
> be defined in the codec's node in those cases, so add it in the
> dt-binding and set it to 0.
> 
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> ---
> 
>  Documentation/devicetree/bindings/sound/rt5682.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH 3/3] ASoC: dt-bindings: rt5682: Add #sound-dai-cells

[Rob Herring]

On Fri, 29 Apr 2022 16:30:39 -0400, Nícolas F. R. A. Prado wrote:
> The rt5682 codec can be pointed to through a sound-dai property to be
> used as part of a machine sound driver. dtc expects #sound-dai-cells to
> be defined in the codec's node in those cases, so add it in the
> dt-binding and set it to 0.
> 
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> ---
> 
>  Documentation/devicetree/bindings/sound/rt5682.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[Jiaxin Yu]

On Wed, 2022-05-04 at 15:38 -0500, Rob Herring wrote:
> On Fri, Apr 29, 2022 at 04:30:37PM -0400, Nícolas F. R. A. Prado
> wrote:
> > The Mediatek AFE PCM controller for MT8192 allows sharing of an I2S
> > bus
> > between two busses. Add a pattern for these properties in the
> > dt-binding.
> > 
> > Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> > 
> > ---
> > 
> >  Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml | 5
> > +++++
> >  1 file changed, 5 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-
> > pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-
> > pcm.yaml
> > index 7a25bc9b8060..5b03c8dbf318 100644
> > --- a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> > +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> > @@ -54,6 +54,11 @@ properties:
> >        - const: aud_infra_clk
> >        - const: aud_infra_26m_clk
> >  
> > +patternProperties:
> > +  "^i2s[0-35-9]-share$":
> > +    description: Name of the I2S bus that is shared with this bus
> > +    pattern: "^I2S[0-35-9]$"
> 
> Why not a phandle to the the other bus? That would be the DT way to
> do 
> it. But I'm not sure I really understand who is sharing what here.
> 
I can explain the usage of this property. The I2S interface of MT8192
only have 3 pins [bit clock/ frame clock/ data in(or out)]. So if we
want use them as normal I2S that has 4 pins [bit clock/ frame clock/
data in/ data out], we need to combine two MT8192 I2S interface to use.
But we need to specify whose clock they use. E.g. "i2s9-share =
"I2S8"".

> > +
> >  required:
> >    - compatible
> >    - interrupts
> > -- 
> > 2.36.0
> > 
> > 

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[Jiaxin Yu]

On Wed, 2022-05-04 at 15:38 -0500, Rob Herring wrote:
> On Fri, Apr 29, 2022 at 04:30:37PM -0400, Nícolas F. R. A. Prado
> wrote:
> > The Mediatek AFE PCM controller for MT8192 allows sharing of an I2S
> > bus
> > between two busses. Add a pattern for these properties in the
> > dt-binding.
> > 
> > Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> > 
> > ---
> > 
> >  Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml | 5
> > +++++
> >  1 file changed, 5 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-
> > pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-
> > pcm.yaml
> > index 7a25bc9b8060..5b03c8dbf318 100644
> > --- a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> > +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> > @@ -54,6 +54,11 @@ properties:
> >        - const: aud_infra_clk
> >        - const: aud_infra_26m_clk
> >  
> > +patternProperties:
> > +  "^i2s[0-35-9]-share$":
> > +    description: Name of the I2S bus that is shared with this bus
> > +    pattern: "^I2S[0-35-9]$"
> 
> Why not a phandle to the the other bus? That would be the DT way to
> do 
> it. But I'm not sure I really understand who is sharing what here.
> 
I can explain the usage of this property. The I2S interface of MT8192
only have 3 pins [bit clock/ frame clock/ data in(or out)]. So if we
want use them as normal I2S that has 4 pins [bit clock/ frame clock/
data in/ data out], we need to combine two MT8192 I2S interface to use.
But we need to specify whose clock they use. E.g. "i2s9-share =
"I2S8"".

> > +
> >  required:
> >    - compatible
> >    - interrupts
> > -- 
> > 2.36.0
> > 
> > 

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[Jiaxin Yu]

On Wed, 2022-05-04 at 15:38 -0500, Rob Herring wrote:
> On Fri, Apr 29, 2022 at 04:30:37PM -0400, Nícolas F. R. A. Prado
> wrote:
> > The Mediatek AFE PCM controller for MT8192 allows sharing of an I2S
> > bus
> > between two busses. Add a pattern for these properties in the
> > dt-binding.
> > 
> > Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> > 
> > ---
> > 
> >  Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml | 5
> > +++++
> >  1 file changed, 5 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-
> > pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-
> > pcm.yaml
> > index 7a25bc9b8060..5b03c8dbf318 100644
> > --- a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> > +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> > @@ -54,6 +54,11 @@ properties:
> >        - const: aud_infra_clk
> >        - const: aud_infra_26m_clk
> >  
> > +patternProperties:
> > +  "^i2s[0-35-9]-share$":
> > +    description: Name of the I2S bus that is shared with this bus
> > +    pattern: "^I2S[0-35-9]$"
> 
> Why not a phandle to the the other bus? That would be the DT way to
> do 
> it. But I'm not sure I really understand who is sharing what here.
> 
I can explain the usage of this property. The I2S interface of MT8192
only have 3 pins [bit clock/ frame clock/ data in(or out)]. So if we
want use them as normal I2S that has 4 pins [bit clock/ frame clock/
data in/ data out], we need to combine two MT8192 I2S interface to use.
But we need to specify whose clock they use. E.g. "i2s9-share =
"I2S8"".

> > +
> >  required:
> >    - compatible
> >    - interrupts
> > -- 
> > 2.36.0
> > 
> > 
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[Jiaxin Yu]

On Wed, 2022-05-04 at 15:38 -0500, Rob Herring wrote:
> On Fri, Apr 29, 2022 at 04:30:37PM -0400, Nícolas F. R. A. Prado
> wrote:
> > The Mediatek AFE PCM controller for MT8192 allows sharing of an I2S
> > bus
> > between two busses. Add a pattern for these properties in the
> > dt-binding.
> > 
> > Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> > 
> > ---
> > 
> >  Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml | 5
> > +++++
> >  1 file changed, 5 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-
> > pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-
> > pcm.yaml
> > index 7a25bc9b8060..5b03c8dbf318 100644
> > --- a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> > +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> > @@ -54,6 +54,11 @@ properties:
> >        - const: aud_infra_clk
> >        - const: aud_infra_26m_clk
> >  
> > +patternProperties:
> > +  "^i2s[0-35-9]-share$":
> > +    description: Name of the I2S bus that is shared with this bus
> > +    pattern: "^I2S[0-35-9]$"
> 
> Why not a phandle to the the other bus? That would be the DT way to
> do 
> it. But I'm not sure I really understand who is sharing what here.
> 
I can explain the usage of this property. The I2S interface of MT8192
only have 3 pins [bit clock/ frame clock/ data in(or out)]. So if we
want use them as normal I2S that has 4 pins [bit clock/ frame clock/
data in/ data out], we need to combine two MT8192 I2S interface to use.
But we need to specify whose clock they use. E.g. "i2s9-share =
"I2S8"".

> > +
> >  required:
> >    - compatible
> >    - interrupts
> > -- 
> > 2.36.0
> > 
> > 
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[AngeloGioacchino Del Regno]

Il 29/04/22 22:30, Nícolas F. R. A. Prado ha scritto:
> The Mediatek AFE PCM controller for MT8192 allows sharing of an I2S bus
> between two busses. Add a pattern for these properties in the
> dt-binding.
> 
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> ---
> 
>   Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml | 5 +++++
>   1 file changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> index 7a25bc9b8060..5b03c8dbf318 100644
> --- a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> @@ -54,6 +54,11 @@ properties:
>         - const: aud_infra_clk
>         - const: aud_infra_26m_clk
>   
> +patternProperties:
> +  "^i2s[0-35-9]-share$":
> +    description: Name of the I2S bus that is shared with this bus
> +    pattern: "^I2S[0-35-9]$"
> +
>   required:
>     - compatible
>     - interrupts
> 

The only other way of doing this would be to complicate this in the driver
so that we can do something like

"i2s-share = <0 2>";  instead of  i2s0-share = "I2S2";

...and I don't think that this would be any more straightforward than the
provided way.

There's an improvement that we can do to that pattern description though,
which would be explaining that declaring 'i2s0-share = "I2S2"' means that
I2S2's data pin will be used as DATA-OUT, while i2s0 is DATA-IN.

Another thing that comes to mind here is that this is a MediaTek specific
property and *not* a generic one, which means that both the driver and
this binding should be fixed to get a "mediatek," prefix, so, this property
should - in reality - be "mediatek,i2s[0-35-9]-share" instead.

I think that everyone agrees about that, but let's see what the others say.

Cheers,
Angelo

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[AngeloGioacchino Del Regno]

Il 29/04/22 22:30, Nícolas F. R. A. Prado ha scritto:
> The Mediatek AFE PCM controller for MT8192 allows sharing of an I2S bus
> between two busses. Add a pattern for these properties in the
> dt-binding.
> 
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> ---
> 
>   Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml | 5 +++++
>   1 file changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> index 7a25bc9b8060..5b03c8dbf318 100644
> --- a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> @@ -54,6 +54,11 @@ properties:
>         - const: aud_infra_clk
>         - const: aud_infra_26m_clk
>   
> +patternProperties:
> +  "^i2s[0-35-9]-share$":
> +    description: Name of the I2S bus that is shared with this bus
> +    pattern: "^I2S[0-35-9]$"
> +
>   required:
>     - compatible
>     - interrupts
> 

The only other way of doing this would be to complicate this in the driver
so that we can do something like

"i2s-share = <0 2>";  instead of  i2s0-share = "I2S2";

...and I don't think that this would be any more straightforward than the
provided way.

There's an improvement that we can do to that pattern description though,
which would be explaining that declaring 'i2s0-share = "I2S2"' means that
I2S2's data pin will be used as DATA-OUT, while i2s0 is DATA-IN.

Another thing that comes to mind here is that this is a MediaTek specific
property and *not* a generic one, which means that both the driver and
this binding should be fixed to get a "mediatek," prefix, so, this property
should - in reality - be "mediatek,i2s[0-35-9]-share" instead.

I think that everyone agrees about that, but let's see what the others say.

Cheers,
Angelo

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[AngeloGioacchino Del Regno]

Il 29/04/22 22:30, Nícolas F. R. A. Prado ha scritto:
> The Mediatek AFE PCM controller for MT8192 allows sharing of an I2S bus
> between two busses. Add a pattern for these properties in the
> dt-binding.
> 
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> ---
> 
>   Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml | 5 +++++
>   1 file changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> index 7a25bc9b8060..5b03c8dbf318 100644
> --- a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> @@ -54,6 +54,11 @@ properties:
>         - const: aud_infra_clk
>         - const: aud_infra_26m_clk
>   
> +patternProperties:
> +  "^i2s[0-35-9]-share$":
> +    description: Name of the I2S bus that is shared with this bus
> +    pattern: "^I2S[0-35-9]$"
> +
>   required:
>     - compatible
>     - interrupts
> 

The only other way of doing this would be to complicate this in the driver
so that we can do something like

"i2s-share = <0 2>";  instead of  i2s0-share = "I2S2";

...and I don't think that this would be any more straightforward than the
provided way.

There's an improvement that we can do to that pattern description though,
which would be explaining that declaring 'i2s0-share = "I2S2"' means that
I2S2's data pin will be used as DATA-OUT, while i2s0 is DATA-IN.

Another thing that comes to mind here is that this is a MediaTek specific
property and *not* a generic one, which means that both the driver and
this binding should be fixed to get a "mediatek," prefix, so, this property
should - in reality - be "mediatek,i2s[0-35-9]-share" instead.

I think that everyone agrees about that, but let's see what the others say.

Cheers,
Angelo

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[AngeloGioacchino Del Regno]

Il 29/04/22 22:30, Nícolas F. R. A. Prado ha scritto:
> The Mediatek AFE PCM controller for MT8192 allows sharing of an I2S bus
> between two busses. Add a pattern for these properties in the
> dt-binding.
> 
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> ---
> 
>   Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml | 5 +++++
>   1 file changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> index 7a25bc9b8060..5b03c8dbf318 100644
> --- a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> @@ -54,6 +54,11 @@ properties:
>         - const: aud_infra_clk
>         - const: aud_infra_26m_clk
>   
> +patternProperties:
> +  "^i2s[0-35-9]-share$":
> +    description: Name of the I2S bus that is shared with this bus
> +    pattern: "^I2S[0-35-9]$"
> +
>   required:
>     - compatible
>     - interrupts
> 

The only other way of doing this would be to complicate this in the driver
so that we can do something like

"i2s-share = <0 2>";  instead of  i2s0-share = "I2S2";

...and I don't think that this would be any more straightforward than the
provided way.

There's an improvement that we can do to that pattern description though,
which would be explaining that declaring 'i2s0-share = "I2S2"' means that
I2S2's data pin will be used as DATA-OUT, while i2s0 is DATA-IN.

Another thing that comes to mind here is that this is a MediaTek specific
property and *not* a generic one, which means that both the driver and
this binding should be fixed to get a "mediatek," prefix, so, this property
should - in reality - be "mediatek,i2s[0-35-9]-share" instead.

I think that everyone agrees about that, but let's see what the others say.

Cheers,
Angelo

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[Jiaxin Yu]

On Thu, 2022-05-05 at 10:08 +0200, AngeloGioacchino Del Regno wrote:
> Il 29/04/22 22:30, Nícolas F. R. A. Prado ha scritto:
> > The Mediatek AFE PCM controller for MT8192 allows sharing of an I2S
> > bus
> > between two busses. Add a pattern for these properties in the
> > dt-binding.
> > 
> > Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> > ---
> > 
> >   Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml | 5
> > +++++
> >   1 file changed, 5 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-
> > pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-
> > pcm.yaml
> > index 7a25bc9b8060..5b03c8dbf318 100644
> > --- a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> > +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> > @@ -54,6 +54,11 @@ properties:
> >         - const: aud_infra_clk
> >         - const: aud_infra_26m_clk
> >   
> > +patternProperties:
> > +  "^i2s[0-35-9]-share$":
> > +    description: Name of the I2S bus that is shared with this bus
> > +    pattern: "^I2S[0-35-9]$"
> > +
> >   required:
> >     - compatible
> >     - interrupts
> > 
> 
> The only other way of doing this would be to complicate this in the
> driver
> so that we can do something like
> 
> "i2s-share = <0 2>";  instead of  i2s0-share = "I2S2";
> 
> ...and I don't think that this would be any more straightforward than
> the
> provided way.
> 
> There's an improvement that we can do to that pattern description
> though,
> which would be explaining that declaring 'i2s0-share = "I2S2"' means
> that
> I2S2's data pin will be used as DATA-OUT, while i2s0 is DATA-IN.
> 
> Another thing that comes to mind here is that this is a MediaTek
> specific
> property and *not* a generic one, which means that both the driver
> and
> this binding should be fixed to get a "mediatek," prefix, so, this
> property
> should - in reality - be "mediatek,i2s[0-35-9]-share" instead.
> 
> I think that everyone agrees about that, but let's see what the
> others say.
> 
> Cheers,
> Angelo

Hi Angelo,

'i2s0-share = "I2S2"' means that if we want use I2S0, there need open
I2S2 to provide clock. Conversely, if we want to use I2S2, we don't
need to open I2S0. However, MediaTek I2S0 and I2S2 hardware are
generally designed as input. So usually we use 'i2s0-share = "I2S1"'.
Even numbers represent input, odd numbers represent output.

Yes, I think adding the "mediatek," prefix is the right way to define a
non-generic property.

Best Regards,
Jiaxin Yu

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[Jiaxin Yu]

On Thu, 2022-05-05 at 10:08 +0200, AngeloGioacchino Del Regno wrote:
> Il 29/04/22 22:30, Nícolas F. R. A. Prado ha scritto:
> > The Mediatek AFE PCM controller for MT8192 allows sharing of an I2S
> > bus
> > between two busses. Add a pattern for these properties in the
> > dt-binding.
> > 
> > Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> > ---
> > 
> >   Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml | 5
> > +++++
> >   1 file changed, 5 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-
> > pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-
> > pcm.yaml
> > index 7a25bc9b8060..5b03c8dbf318 100644
> > --- a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> > +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> > @@ -54,6 +54,11 @@ properties:
> >         - const: aud_infra_clk
> >         - const: aud_infra_26m_clk
> >   
> > +patternProperties:
> > +  "^i2s[0-35-9]-share$":
> > +    description: Name of the I2S bus that is shared with this bus
> > +    pattern: "^I2S[0-35-9]$"
> > +
> >   required:
> >     - compatible
> >     - interrupts
> > 
> 
> The only other way of doing this would be to complicate this in the
> driver
> so that we can do something like
> 
> "i2s-share = <0 2>";  instead of  i2s0-share = "I2S2";
> 
> ...and I don't think that this would be any more straightforward than
> the
> provided way.
> 
> There's an improvement that we can do to that pattern description
> though,
> which would be explaining that declaring 'i2s0-share = "I2S2"' means
> that
> I2S2's data pin will be used as DATA-OUT, while i2s0 is DATA-IN.
> 
> Another thing that comes to mind here is that this is a MediaTek
> specific
> property and *not* a generic one, which means that both the driver
> and
> this binding should be fixed to get a "mediatek," prefix, so, this
> property
> should - in reality - be "mediatek,i2s[0-35-9]-share" instead.
> 
> I think that everyone agrees about that, but let's see what the
> others say.
> 
> Cheers,
> Angelo

Hi Angelo,

'i2s0-share = "I2S2"' means that if we want use I2S0, there need open
I2S2 to provide clock. Conversely, if we want to use I2S2, we don't
need to open I2S0. However, MediaTek I2S0 and I2S2 hardware are
generally designed as input. So usually we use 'i2s0-share = "I2S1"'.
Even numbers represent input, odd numbers represent output.

Yes, I think adding the "mediatek," prefix is the right way to define a
non-generic property.

Best Regards,
Jiaxin Yu

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[Jiaxin Yu]

On Thu, 2022-05-05 at 10:08 +0200, AngeloGioacchino Del Regno wrote:
> Il 29/04/22 22:30, Nícolas F. R. A. Prado ha scritto:
> > The Mediatek AFE PCM controller for MT8192 allows sharing of an I2S
> > bus
> > between two busses. Add a pattern for these properties in the
> > dt-binding.
> > 
> > Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> > ---
> > 
> >   Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml | 5
> > +++++
> >   1 file changed, 5 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-
> > pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-
> > pcm.yaml
> > index 7a25bc9b8060..5b03c8dbf318 100644
> > --- a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> > +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> > @@ -54,6 +54,11 @@ properties:
> >         - const: aud_infra_clk
> >         - const: aud_infra_26m_clk
> >   
> > +patternProperties:
> > +  "^i2s[0-35-9]-share$":
> > +    description: Name of the I2S bus that is shared with this bus
> > +    pattern: "^I2S[0-35-9]$"
> > +
> >   required:
> >     - compatible
> >     - interrupts
> > 
> 
> The only other way of doing this would be to complicate this in the
> driver
> so that we can do something like
> 
> "i2s-share = <0 2>";  instead of  i2s0-share = "I2S2";
> 
> ...and I don't think that this would be any more straightforward than
> the
> provided way.
> 
> There's an improvement that we can do to that pattern description
> though,
> which would be explaining that declaring 'i2s0-share = "I2S2"' means
> that
> I2S2's data pin will be used as DATA-OUT, while i2s0 is DATA-IN.
> 
> Another thing that comes to mind here is that this is a MediaTek
> specific
> property and *not* a generic one, which means that both the driver
> and
> this binding should be fixed to get a "mediatek," prefix, so, this
> property
> should - in reality - be "mediatek,i2s[0-35-9]-share" instead.
> 
> I think that everyone agrees about that, but let's see what the
> others say.
> 
> Cheers,
> Angelo

Hi Angelo,

'i2s0-share = "I2S2"' means that if we want use I2S0, there need open
I2S2 to provide clock. Conversely, if we want to use I2S2, we don't
need to open I2S0. However, MediaTek I2S0 and I2S2 hardware are
generally designed as input. So usually we use 'i2s0-share = "I2S1"'.
Even numbers represent input, odd numbers represent output.

Yes, I think adding the "mediatek," prefix is the right way to define a
non-generic property.

Best Regards,
Jiaxin Yu
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[Jiaxin Yu]

On Thu, 2022-05-05 at 10:08 +0200, AngeloGioacchino Del Regno wrote:
> Il 29/04/22 22:30, Nícolas F. R. A. Prado ha scritto:
> > The Mediatek AFE PCM controller for MT8192 allows sharing of an I2S
> > bus
> > between two busses. Add a pattern for these properties in the
> > dt-binding.
> > 
> > Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> > ---
> > 
> >   Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml | 5
> > +++++
> >   1 file changed, 5 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-
> > pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-
> > pcm.yaml
> > index 7a25bc9b8060..5b03c8dbf318 100644
> > --- a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> > +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> > @@ -54,6 +54,11 @@ properties:
> >         - const: aud_infra_clk
> >         - const: aud_infra_26m_clk
> >   
> > +patternProperties:
> > +  "^i2s[0-35-9]-share$":
> > +    description: Name of the I2S bus that is shared with this bus
> > +    pattern: "^I2S[0-35-9]$"
> > +
> >   required:
> >     - compatible
> >     - interrupts
> > 
> 
> The only other way of doing this would be to complicate this in the
> driver
> so that we can do something like
> 
> "i2s-share = <0 2>";  instead of  i2s0-share = "I2S2";
> 
> ...and I don't think that this would be any more straightforward than
> the
> provided way.
> 
> There's an improvement that we can do to that pattern description
> though,
> which would be explaining that declaring 'i2s0-share = "I2S2"' means
> that
> I2S2's data pin will be used as DATA-OUT, while i2s0 is DATA-IN.
> 
> Another thing that comes to mind here is that this is a MediaTek
> specific
> property and *not* a generic one, which means that both the driver
> and
> this binding should be fixed to get a "mediatek," prefix, so, this
> property
> should - in reality - be "mediatek,i2s[0-35-9]-share" instead.
> 
> I think that everyone agrees about that, but let's see what the
> others say.
> 
> Cheers,
> Angelo

Hi Angelo,

'i2s0-share = "I2S2"' means that if we want use I2S0, there need open
I2S2 to provide clock. Conversely, if we want to use I2S2, we don't
need to open I2S0. However, MediaTek I2S0 and I2S2 hardware are
generally designed as input. So usually we use 'i2s0-share = "I2S1"'.
Even numbers represent input, odd numbers represent output.

Yes, I think adding the "mediatek," prefix is the right way to define a
non-generic property.

Best Regards,
Jiaxin Yu
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[AngeloGioacchino Del Regno]

Il 05/05/22 10:48, Jiaxin Yu ha scritto:
> On Thu, 2022-05-05 at 10:08 +0200, AngeloGioacchino Del Regno wrote:
>> Il 29/04/22 22:30, Nícolas F. R. A. Prado ha scritto:
>>> The Mediatek AFE PCM controller for MT8192 allows sharing of an I2S
>>> bus
>>> between two busses. Add a pattern for these properties in the
>>> dt-binding.
>>>
>>> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
>>> ---
>>>
>>>    Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml | 5
>>> +++++
>>>    1 file changed, 5 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-
>>> pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-
>>> pcm.yaml
>>> index 7a25bc9b8060..5b03c8dbf318 100644
>>> --- a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
>>> +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
>>> @@ -54,6 +54,11 @@ properties:
>>>          - const: aud_infra_clk
>>>          - const: aud_infra_26m_clk
>>>    
>>> +patternProperties:
>>> +  "^i2s[0-35-9]-share$":
>>> +    description: Name of the I2S bus that is shared with this bus
>>> +    pattern: "^I2S[0-35-9]$"
>>> +
>>>    required:
>>>      - compatible
>>>      - interrupts
>>>
>>
>> The only other way of doing this would be to complicate this in the
>> driver
>> so that we can do something like
>>
>> "i2s-share = <0 2>";  instead of  i2s0-share = "I2S2";
>>
>> ...and I don't think that this would be any more straightforward than
>> the
>> provided way.
>>
>> There's an improvement that we can do to that pattern description
>> though,
>> which would be explaining that declaring 'i2s0-share = "I2S2"' means
>> that
>> I2S2's data pin will be used as DATA-OUT, while i2s0 is DATA-IN.
>>
>> Another thing that comes to mind here is that this is a MediaTek
>> specific
>> property and *not* a generic one, which means that both the driver
>> and
>> this binding should be fixed to get a "mediatek," prefix, so, this
>> property
>> should - in reality - be "mediatek,i2s[0-35-9]-share" instead.
>>
>> I think that everyone agrees about that, but let's see what the
>> others say.
>>
>> Cheers,
>> Angelo
> 
> Hi Angelo,
> 
> 'i2s0-share = "I2S2"' means that if we want use I2S0, there need open
> I2S2 to provide clock. Conversely, if we want to use I2S2, we don't
> need to open I2S0. However, MediaTek I2S0 and I2S2 hardware are
> generally designed as input. So usually we use 'i2s0-share = "I2S1"'.
> Even numbers represent input, odd numbers represent output.
> 
> Yes, I think adding the "mediatek," prefix is the right way to define a
> non-generic property.
> 

Hello Jiaxin,

if I get this correctly, i2s0-share = "I2S2" would be *invalid*... as you
just explained, i2sX, where:

X = even number -> always DATA IN
X = odd number  -> always DATA OUT

...this means that the dt-binding needs a pattern to specify that only odd
can be assigned to only even.

Nicolas, take note! :-) :-)

Thanks,
Angelo

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[AngeloGioacchino Del Regno]

Il 05/05/22 10:48, Jiaxin Yu ha scritto:
> On Thu, 2022-05-05 at 10:08 +0200, AngeloGioacchino Del Regno wrote:
>> Il 29/04/22 22:30, Nícolas F. R. A. Prado ha scritto:
>>> The Mediatek AFE PCM controller for MT8192 allows sharing of an I2S
>>> bus
>>> between two busses. Add a pattern for these properties in the
>>> dt-binding.
>>>
>>> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
>>> ---
>>>
>>>    Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml | 5
>>> +++++
>>>    1 file changed, 5 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-
>>> pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-
>>> pcm.yaml
>>> index 7a25bc9b8060..5b03c8dbf318 100644
>>> --- a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
>>> +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
>>> @@ -54,6 +54,11 @@ properties:
>>>          - const: aud_infra_clk
>>>          - const: aud_infra_26m_clk
>>>    
>>> +patternProperties:
>>> +  "^i2s[0-35-9]-share$":
>>> +    description: Name of the I2S bus that is shared with this bus
>>> +    pattern: "^I2S[0-35-9]$"
>>> +
>>>    required:
>>>      - compatible
>>>      - interrupts
>>>
>>
>> The only other way of doing this would be to complicate this in the
>> driver
>> so that we can do something like
>>
>> "i2s-share = <0 2>";  instead of  i2s0-share = "I2S2";
>>
>> ...and I don't think that this would be any more straightforward than
>> the
>> provided way.
>>
>> There's an improvement that we can do to that pattern description
>> though,
>> which would be explaining that declaring 'i2s0-share = "I2S2"' means
>> that
>> I2S2's data pin will be used as DATA-OUT, while i2s0 is DATA-IN.
>>
>> Another thing that comes to mind here is that this is a MediaTek
>> specific
>> property and *not* a generic one, which means that both the driver
>> and
>> this binding should be fixed to get a "mediatek," prefix, so, this
>> property
>> should - in reality - be "mediatek,i2s[0-35-9]-share" instead.
>>
>> I think that everyone agrees about that, but let's see what the
>> others say.
>>
>> Cheers,
>> Angelo
> 
> Hi Angelo,
> 
> 'i2s0-share = "I2S2"' means that if we want use I2S0, there need open
> I2S2 to provide clock. Conversely, if we want to use I2S2, we don't
> need to open I2S0. However, MediaTek I2S0 and I2S2 hardware are
> generally designed as input. So usually we use 'i2s0-share = "I2S1"'.
> Even numbers represent input, odd numbers represent output.
> 
> Yes, I think adding the "mediatek," prefix is the right way to define a
> non-generic property.
> 

Hello Jiaxin,

if I get this correctly, i2s0-share = "I2S2" would be *invalid*... as you
just explained, i2sX, where:

X = even number -> always DATA IN
X = odd number  -> always DATA OUT

...this means that the dt-binding needs a pattern to specify that only odd
can be assigned to only even.

Nicolas, take note! :-) :-)

Thanks,
Angelo

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[AngeloGioacchino Del Regno]

Il 05/05/22 10:48, Jiaxin Yu ha scritto:
> On Thu, 2022-05-05 at 10:08 +0200, AngeloGioacchino Del Regno wrote:
>> Il 29/04/22 22:30, Nícolas F. R. A. Prado ha scritto:
>>> The Mediatek AFE PCM controller for MT8192 allows sharing of an I2S
>>> bus
>>> between two busses. Add a pattern for these properties in the
>>> dt-binding.
>>>
>>> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
>>> ---
>>>
>>>    Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml | 5
>>> +++++
>>>    1 file changed, 5 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-
>>> pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-
>>> pcm.yaml
>>> index 7a25bc9b8060..5b03c8dbf318 100644
>>> --- a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
>>> +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
>>> @@ -54,6 +54,11 @@ properties:
>>>          - const: aud_infra_clk
>>>          - const: aud_infra_26m_clk
>>>    
>>> +patternProperties:
>>> +  "^i2s[0-35-9]-share$":
>>> +    description: Name of the I2S bus that is shared with this bus
>>> +    pattern: "^I2S[0-35-9]$"
>>> +
>>>    required:
>>>      - compatible
>>>      - interrupts
>>>
>>
>> The only other way of doing this would be to complicate this in the
>> driver
>> so that we can do something like
>>
>> "i2s-share = <0 2>";  instead of  i2s0-share = "I2S2";
>>
>> ...and I don't think that this would be any more straightforward than
>> the
>> provided way.
>>
>> There's an improvement that we can do to that pattern description
>> though,
>> which would be explaining that declaring 'i2s0-share = "I2S2"' means
>> that
>> I2S2's data pin will be used as DATA-OUT, while i2s0 is DATA-IN.
>>
>> Another thing that comes to mind here is that this is a MediaTek
>> specific
>> property and *not* a generic one, which means that both the driver
>> and
>> this binding should be fixed to get a "mediatek," prefix, so, this
>> property
>> should - in reality - be "mediatek,i2s[0-35-9]-share" instead.
>>
>> I think that everyone agrees about that, but let's see what the
>> others say.
>>
>> Cheers,
>> Angelo
> 
> Hi Angelo,
> 
> 'i2s0-share = "I2S2"' means that if we want use I2S0, there need open
> I2S2 to provide clock. Conversely, if we want to use I2S2, we don't
> need to open I2S0. However, MediaTek I2S0 and I2S2 hardware are
> generally designed as input. So usually we use 'i2s0-share = "I2S1"'.
> Even numbers represent input, odd numbers represent output.
> 
> Yes, I think adding the "mediatek," prefix is the right way to define a
> non-generic property.
> 

Hello Jiaxin,

if I get this correctly, i2s0-share = "I2S2" would be *invalid*... as you
just explained, i2sX, where:

X = even number -> always DATA IN
X = odd number  -> always DATA OUT

...this means that the dt-binding needs a pattern to specify that only odd
can be assigned to only even.

Nicolas, take note! :-) :-)

Thanks,
Angelo

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[AngeloGioacchino Del Regno]

Il 05/05/22 10:48, Jiaxin Yu ha scritto:
> On Thu, 2022-05-05 at 10:08 +0200, AngeloGioacchino Del Regno wrote:
>> Il 29/04/22 22:30, Nícolas F. R. A. Prado ha scritto:
>>> The Mediatek AFE PCM controller for MT8192 allows sharing of an I2S
>>> bus
>>> between two busses. Add a pattern for these properties in the
>>> dt-binding.
>>>
>>> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
>>> ---
>>>
>>>    Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml | 5
>>> +++++
>>>    1 file changed, 5 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-
>>> pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-
>>> pcm.yaml
>>> index 7a25bc9b8060..5b03c8dbf318 100644
>>> --- a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
>>> +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
>>> @@ -54,6 +54,11 @@ properties:
>>>          - const: aud_infra_clk
>>>          - const: aud_infra_26m_clk
>>>    
>>> +patternProperties:
>>> +  "^i2s[0-35-9]-share$":
>>> +    description: Name of the I2S bus that is shared with this bus
>>> +    pattern: "^I2S[0-35-9]$"
>>> +
>>>    required:
>>>      - compatible
>>>      - interrupts
>>>
>>
>> The only other way of doing this would be to complicate this in the
>> driver
>> so that we can do something like
>>
>> "i2s-share = <0 2>";  instead of  i2s0-share = "I2S2";
>>
>> ...and I don't think that this would be any more straightforward than
>> the
>> provided way.
>>
>> There's an improvement that we can do to that pattern description
>> though,
>> which would be explaining that declaring 'i2s0-share = "I2S2"' means
>> that
>> I2S2's data pin will be used as DATA-OUT, while i2s0 is DATA-IN.
>>
>> Another thing that comes to mind here is that this is a MediaTek
>> specific
>> property and *not* a generic one, which means that both the driver
>> and
>> this binding should be fixed to get a "mediatek," prefix, so, this
>> property
>> should - in reality - be "mediatek,i2s[0-35-9]-share" instead.
>>
>> I think that everyone agrees about that, but let's see what the
>> others say.
>>
>> Cheers,
>> Angelo
> 
> Hi Angelo,
> 
> 'i2s0-share = "I2S2"' means that if we want use I2S0, there need open
> I2S2 to provide clock. Conversely, if we want to use I2S2, we don't
> need to open I2S0. However, MediaTek I2S0 and I2S2 hardware are
> generally designed as input. So usually we use 'i2s0-share = "I2S1"'.
> Even numbers represent input, odd numbers represent output.
> 
> Yes, I think adding the "mediatek," prefix is the right way to define a
> non-generic property.
> 

Hello Jiaxin,

if I get this correctly, i2s0-share = "I2S2" would be *invalid*... as you
just explained, i2sX, where:

X = even number -> always DATA IN
X = odd number  -> always DATA OUT

...this means that the dt-binding needs a pattern to specify that only odd
can be assigned to only even.

Nicolas, take note! :-) :-)

Thanks,
Angelo

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[Nícolas F. R. A. Prado]

On Thu, May 05, 2022 at 10:52:45AM +0200, AngeloGioacchino Del Regno wrote:
> Il 05/05/22 10:48, Jiaxin Yu ha scritto:
> > On Thu, 2022-05-05 at 10:08 +0200, AngeloGioacchino Del Regno wrote:
> > > Il 29/04/22 22:30, Nícolas F. R. A. Prado ha scritto:
> > > > The Mediatek AFE PCM controller for MT8192 allows sharing of an I2S
> > > > bus
> > > > between two busses. Add a pattern for these properties in the
> > > > dt-binding.
> > > > 
> > > > Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> > > > ---
> > > > 
> > > >    Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml | 5
> > > > +++++
> > > >    1 file changed, 5 insertions(+)
> > > > 
> > > > diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > pcm.yaml
> > > > index 7a25bc9b8060..5b03c8dbf318 100644
> > > > --- a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> > > > +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> > > > @@ -54,6 +54,11 @@ properties:
> > > >          - const: aud_infra_clk
> > > >          - const: aud_infra_26m_clk
> > > > +patternProperties:
> > > > +  "^i2s[0-35-9]-share$":
> > > > +    description: Name of the I2S bus that is shared with this bus
> > > > +    pattern: "^I2S[0-35-9]$"
> > > > +
> > > >    required:
> > > >      - compatible
> > > >      - interrupts
> > > > 
> > > 
> > > The only other way of doing this would be to complicate this in the
> > > driver
> > > so that we can do something like
> > > 
> > > "i2s-share = <0 2>";  instead of  i2s0-share = "I2S2";
> > > 
> > > ...and I don't think that this would be any more straightforward than
> > > the
> > > provided way.
> > > 
> > > There's an improvement that we can do to that pattern description
> > > though,
> > > which would be explaining that declaring 'i2s0-share = "I2S2"' means
> > > that
> > > I2S2's data pin will be used as DATA-OUT, while i2s0 is DATA-IN.
> > > 
> > > Another thing that comes to mind here is that this is a MediaTek
> > > specific
> > > property and *not* a generic one, which means that both the driver
> > > and
> > > this binding should be fixed to get a "mediatek," prefix, so, this
> > > property
> > > should - in reality - be "mediatek,i2s[0-35-9]-share" instead.
> > > 
> > > I think that everyone agrees about that, but let's see what the
> > > others say.
> > > 
> > > Cheers,
> > > Angelo
> > 
> > Hi Angelo,
> > 
> > 'i2s0-share = "I2S2"' means that if we want use I2S0, there need open
> > I2S2 to provide clock. Conversely, if we want to use I2S2, we don't
> > need to open I2S0. However, MediaTek I2S0 and I2S2 hardware are
> > generally designed as input. So usually we use 'i2s0-share = "I2S1"'.
> > Even numbers represent input, odd numbers represent output.
> > 
> > Yes, I think adding the "mediatek," prefix is the right way to define a
> > non-generic property.
> > 

Hi Jiaxin,

thank you for the insights.

> 
> Hello Jiaxin,
> 
> if I get this correctly, i2s0-share = "I2S2" would be *invalid*... as you
> just explained, i2sX, where:
> 
> X = even number -> always DATA IN
> X = odd number  -> always DATA OUT
> 
> ...this means that the dt-binding needs a pattern to specify that only odd
> can be assigned to only even.

So, the situation seems different at least on mt8192-asurada-spherion.
Here, I2S8 is used for the headset microphone and I2S9 for the headset audio.
Even for input and odd for output agree with Jiaxin's description. However, the
input bus seems to be the main one, that is, disabling I2S8:

	amixer cset name='UL2_CH1 I2S8_CH1' 0
	amixer cset name='UL2_CH2 I2S8_CH2' 0

not only disables the microphone but also the audio on the headset. If I add 

	i2s9-share = "I2S8";

on the DT, then everything works, I can disable I2S8 without impacting the
headset audio. So the pattern for the property on this platform is the opposite
that Jiaxin mentioned. This tells me that we should keep the binding more
generic (not assume where odds and evens go). I will still apply the other
suggestions mentioned though.

Thanks,
Nícolas

> 
> Nicolas, take note! :-) :-)
> 
> Thanks,
> Angelo
> 
> -- 
> To unsubscribe, send mail to kernel-unsubscribe@lists.collabora.co.uk.

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[Nícolas F. R. A. Prado]

On Thu, May 05, 2022 at 10:52:45AM +0200, AngeloGioacchino Del Regno wrote:
> Il 05/05/22 10:48, Jiaxin Yu ha scritto:
> > On Thu, 2022-05-05 at 10:08 +0200, AngeloGioacchino Del Regno wrote:
> > > Il 29/04/22 22:30, Nícolas F. R. A. Prado ha scritto:
> > > > The Mediatek AFE PCM controller for MT8192 allows sharing of an I2S
> > > > bus
> > > > between two busses. Add a pattern for these properties in the
> > > > dt-binding.
> > > > 
> > > > Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> > > > ---
> > > > 
> > > >    Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml | 5
> > > > +++++
> > > >    1 file changed, 5 insertions(+)
> > > > 
> > > > diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > pcm.yaml
> > > > index 7a25bc9b8060..5b03c8dbf318 100644
> > > > --- a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> > > > +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> > > > @@ -54,6 +54,11 @@ properties:
> > > >          - const: aud_infra_clk
> > > >          - const: aud_infra_26m_clk
> > > > +patternProperties:
> > > > +  "^i2s[0-35-9]-share$":
> > > > +    description: Name of the I2S bus that is shared with this bus
> > > > +    pattern: "^I2S[0-35-9]$"
> > > > +
> > > >    required:
> > > >      - compatible
> > > >      - interrupts
> > > > 
> > > 
> > > The only other way of doing this would be to complicate this in the
> > > driver
> > > so that we can do something like
> > > 
> > > "i2s-share = <0 2>";  instead of  i2s0-share = "I2S2";
> > > 
> > > ...and I don't think that this would be any more straightforward than
> > > the
> > > provided way.
> > > 
> > > There's an improvement that we can do to that pattern description
> > > though,
> > > which would be explaining that declaring 'i2s0-share = "I2S2"' means
> > > that
> > > I2S2's data pin will be used as DATA-OUT, while i2s0 is DATA-IN.
> > > 
> > > Another thing that comes to mind here is that this is a MediaTek
> > > specific
> > > property and *not* a generic one, which means that both the driver
> > > and
> > > this binding should be fixed to get a "mediatek," prefix, so, this
> > > property
> > > should - in reality - be "mediatek,i2s[0-35-9]-share" instead.
> > > 
> > > I think that everyone agrees about that, but let's see what the
> > > others say.
> > > 
> > > Cheers,
> > > Angelo
> > 
> > Hi Angelo,
> > 
> > 'i2s0-share = "I2S2"' means that if we want use I2S0, there need open
> > I2S2 to provide clock. Conversely, if we want to use I2S2, we don't
> > need to open I2S0. However, MediaTek I2S0 and I2S2 hardware are
> > generally designed as input. So usually we use 'i2s0-share = "I2S1"'.
> > Even numbers represent input, odd numbers represent output.
> > 
> > Yes, I think adding the "mediatek," prefix is the right way to define a
> > non-generic property.
> > 

Hi Jiaxin,

thank you for the insights.

> 
> Hello Jiaxin,
> 
> if I get this correctly, i2s0-share = "I2S2" would be *invalid*... as you
> just explained, i2sX, where:
> 
> X = even number -> always DATA IN
> X = odd number  -> always DATA OUT
> 
> ...this means that the dt-binding needs a pattern to specify that only odd
> can be assigned to only even.

So, the situation seems different at least on mt8192-asurada-spherion.
Here, I2S8 is used for the headset microphone and I2S9 for the headset audio.
Even for input and odd for output agree with Jiaxin's description. However, the
input bus seems to be the main one, that is, disabling I2S8:

	amixer cset name='UL2_CH1 I2S8_CH1' 0
	amixer cset name='UL2_CH2 I2S8_CH2' 0

not only disables the microphone but also the audio on the headset. If I add 

	i2s9-share = "I2S8";

on the DT, then everything works, I can disable I2S8 without impacting the
headset audio. So the pattern for the property on this platform is the opposite
that Jiaxin mentioned. This tells me that we should keep the binding more
generic (not assume where odds and evens go). I will still apply the other
suggestions mentioned though.

Thanks,
Nícolas

> 
> Nicolas, take note! :-) :-)
> 
> Thanks,
> Angelo
> 
> -- 
> To unsubscribe, send mail to kernel-unsubscribe@lists.collabora.co.uk.

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[Nícolas F. R. A. Prado]

On Thu, May 05, 2022 at 10:52:45AM +0200, AngeloGioacchino Del Regno wrote:
> Il 05/05/22 10:48, Jiaxin Yu ha scritto:
> > On Thu, 2022-05-05 at 10:08 +0200, AngeloGioacchino Del Regno wrote:
> > > Il 29/04/22 22:30, Nícolas F. R. A. Prado ha scritto:
> > > > The Mediatek AFE PCM controller for MT8192 allows sharing of an I2S
> > > > bus
> > > > between two busses. Add a pattern for these properties in the
> > > > dt-binding.
> > > > 
> > > > Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> > > > ---
> > > > 
> > > >    Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml | 5
> > > > +++++
> > > >    1 file changed, 5 insertions(+)
> > > > 
> > > > diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > pcm.yaml
> > > > index 7a25bc9b8060..5b03c8dbf318 100644
> > > > --- a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> > > > +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> > > > @@ -54,6 +54,11 @@ properties:
> > > >          - const: aud_infra_clk
> > > >          - const: aud_infra_26m_clk
> > > > +patternProperties:
> > > > +  "^i2s[0-35-9]-share$":
> > > > +    description: Name of the I2S bus that is shared with this bus
> > > > +    pattern: "^I2S[0-35-9]$"
> > > > +
> > > >    required:
> > > >      - compatible
> > > >      - interrupts
> > > > 
> > > 
> > > The only other way of doing this would be to complicate this in the
> > > driver
> > > so that we can do something like
> > > 
> > > "i2s-share = <0 2>";  instead of  i2s0-share = "I2S2";
> > > 
> > > ...and I don't think that this would be any more straightforward than
> > > the
> > > provided way.
> > > 
> > > There's an improvement that we can do to that pattern description
> > > though,
> > > which would be explaining that declaring 'i2s0-share = "I2S2"' means
> > > that
> > > I2S2's data pin will be used as DATA-OUT, while i2s0 is DATA-IN.
> > > 
> > > Another thing that comes to mind here is that this is a MediaTek
> > > specific
> > > property and *not* a generic one, which means that both the driver
> > > and
> > > this binding should be fixed to get a "mediatek," prefix, so, this
> > > property
> > > should - in reality - be "mediatek,i2s[0-35-9]-share" instead.
> > > 
> > > I think that everyone agrees about that, but let's see what the
> > > others say.
> > > 
> > > Cheers,
> > > Angelo
> > 
> > Hi Angelo,
> > 
> > 'i2s0-share = "I2S2"' means that if we want use I2S0, there need open
> > I2S2 to provide clock. Conversely, if we want to use I2S2, we don't
> > need to open I2S0. However, MediaTek I2S0 and I2S2 hardware are
> > generally designed as input. So usually we use 'i2s0-share = "I2S1"'.
> > Even numbers represent input, odd numbers represent output.
> > 
> > Yes, I think adding the "mediatek," prefix is the right way to define a
> > non-generic property.
> > 

Hi Jiaxin,

thank you for the insights.

> 
> Hello Jiaxin,
> 
> if I get this correctly, i2s0-share = "I2S2" would be *invalid*... as you
> just explained, i2sX, where:
> 
> X = even number -> always DATA IN
> X = odd number  -> always DATA OUT
> 
> ...this means that the dt-binding needs a pattern to specify that only odd
> can be assigned to only even.

So, the situation seems different at least on mt8192-asurada-spherion.
Here, I2S8 is used for the headset microphone and I2S9 for the headset audio.
Even for input and odd for output agree with Jiaxin's description. However, the
input bus seems to be the main one, that is, disabling I2S8:

	amixer cset name='UL2_CH1 I2S8_CH1' 0
	amixer cset name='UL2_CH2 I2S8_CH2' 0

not only disables the microphone but also the audio on the headset. If I add 

	i2s9-share = "I2S8";

on the DT, then everything works, I can disable I2S8 without impacting the
headset audio. So the pattern for the property on this platform is the opposite
that Jiaxin mentioned. This tells me that we should keep the binding more
generic (not assume where odds and evens go). I will still apply the other
suggestions mentioned though.

Thanks,
Nícolas

> 
> Nicolas, take note! :-) :-)
> 
> Thanks,
> Angelo
> 
> -- 
> To unsubscribe, send mail to kernel-unsubscribe@lists.collabora.co.uk.

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[Nícolas F. R. A. Prado]

On Thu, May 05, 2022 at 10:52:45AM +0200, AngeloGioacchino Del Regno wrote:
> Il 05/05/22 10:48, Jiaxin Yu ha scritto:
> > On Thu, 2022-05-05 at 10:08 +0200, AngeloGioacchino Del Regno wrote:
> > > Il 29/04/22 22:30, Nícolas F. R. A. Prado ha scritto:
> > > > The Mediatek AFE PCM controller for MT8192 allows sharing of an I2S
> > > > bus
> > > > between two busses. Add a pattern for these properties in the
> > > > dt-binding.
> > > > 
> > > > Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
> > > > ---
> > > > 
> > > >    Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml | 5
> > > > +++++
> > > >    1 file changed, 5 insertions(+)
> > > > 
> > > > diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > pcm.yaml
> > > > index 7a25bc9b8060..5b03c8dbf318 100644
> > > > --- a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> > > > +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> > > > @@ -54,6 +54,11 @@ properties:
> > > >          - const: aud_infra_clk
> > > >          - const: aud_infra_26m_clk
> > > > +patternProperties:
> > > > +  "^i2s[0-35-9]-share$":
> > > > +    description: Name of the I2S bus that is shared with this bus
> > > > +    pattern: "^I2S[0-35-9]$"
> > > > +
> > > >    required:
> > > >      - compatible
> > > >      - interrupts
> > > > 
> > > 
> > > The only other way of doing this would be to complicate this in the
> > > driver
> > > so that we can do something like
> > > 
> > > "i2s-share = <0 2>";  instead of  i2s0-share = "I2S2";
> > > 
> > > ...and I don't think that this would be any more straightforward than
> > > the
> > > provided way.
> > > 
> > > There's an improvement that we can do to that pattern description
> > > though,
> > > which would be explaining that declaring 'i2s0-share = "I2S2"' means
> > > that
> > > I2S2's data pin will be used as DATA-OUT, while i2s0 is DATA-IN.
> > > 
> > > Another thing that comes to mind here is that this is a MediaTek
> > > specific
> > > property and *not* a generic one, which means that both the driver
> > > and
> > > this binding should be fixed to get a "mediatek," prefix, so, this
> > > property
> > > should - in reality - be "mediatek,i2s[0-35-9]-share" instead.
> > > 
> > > I think that everyone agrees about that, but let's see what the
> > > others say.
> > > 
> > > Cheers,
> > > Angelo
> > 
> > Hi Angelo,
> > 
> > 'i2s0-share = "I2S2"' means that if we want use I2S0, there need open
> > I2S2 to provide clock. Conversely, if we want to use I2S2, we don't
> > need to open I2S0. However, MediaTek I2S0 and I2S2 hardware are
> > generally designed as input. So usually we use 'i2s0-share = "I2S1"'.
> > Even numbers represent input, odd numbers represent output.
> > 
> > Yes, I think adding the "mediatek," prefix is the right way to define a
> > non-generic property.
> > 

Hi Jiaxin,

thank you for the insights.

> 
> Hello Jiaxin,
> 
> if I get this correctly, i2s0-share = "I2S2" would be *invalid*... as you
> just explained, i2sX, where:
> 
> X = even number -> always DATA IN
> X = odd number  -> always DATA OUT
> 
> ...this means that the dt-binding needs a pattern to specify that only odd
> can be assigned to only even.

So, the situation seems different at least on mt8192-asurada-spherion.
Here, I2S8 is used for the headset microphone and I2S9 for the headset audio.
Even for input and odd for output agree with Jiaxin's description. However, the
input bus seems to be the main one, that is, disabling I2S8:

	amixer cset name='UL2_CH1 I2S8_CH1' 0
	amixer cset name='UL2_CH2 I2S8_CH2' 0

not only disables the microphone but also the audio on the headset. If I add 

	i2s9-share = "I2S8";

on the DT, then everything works, I can disable I2S8 without impacting the
headset audio. So the pattern for the property on this platform is the opposite
that Jiaxin mentioned. This tells me that we should keep the binding more
generic (not assume where odds and evens go). I will still apply the other
suggestions mentioned though.

Thanks,
Nícolas

> 
> Nicolas, take note! :-) :-)
> 
> Thanks,
> Angelo
> 
> -- 
> To unsubscribe, send mail to kernel-unsubscribe@lists.collabora.co.uk.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[Jiaxin Yu]

On Thu, 2022-05-05 at 12:25 -0400, Nícolas F. R. A. Prado wrote:
> > 

> On Thu, May 05, 2022 at 10:52:45AM +0200, AngeloGioacchino Del Regno
> wrote:
> > Il 05/05/22 10:48, Jiaxin Yu ha scritto:
> > > On Thu, 2022-05-05 at 10:08 +0200, AngeloGioacchino Del Regno
> > > wrote:
> > > > Il 29/04/22 22:30, Nícolas F. R. A. Prado ha scritto:
> > > > > The Mediatek AFE PCM controller for MT8192 allows sharing of
> > > > > an I2S
> > > > > bus
> > > > > between two busses. Add a pattern for these properties in the
> > > > > dt-binding.
> > > > > 
> > > > > Signed-off-by: Nícolas F. R. A. Prado <
> > > > > nfraprado@collabora.com>
> > > > > ---
> > > > > 
> > > > >    Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > pcm.yaml | 5
> > > > > +++++
> > > > >    1 file changed, 5 insertions(+)
> > > > > 
> > > > > diff --git a/Documentation/devicetree/bindings/sound/mt8192-
> > > > > afe-
> > > > > pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-
> > > > > afe-
> > > > > pcm.yaml
> > > > > index 7a25bc9b8060..5b03c8dbf318 100644
> > > > > --- a/Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > pcm.yaml
> > > > > +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > pcm.yaml
> > > > > @@ -54,6 +54,11 @@ properties:
> > > > >          - const: aud_infra_clk
> > > > >          - const: aud_infra_26m_clk
> > > > > +patternProperties:
> > > > > +  "^i2s[0-35-9]-share$":
> > > > > +    description: Name of the I2S bus that is shared with
> > > > > this bus
> > > > > +    pattern: "^I2S[0-35-9]$"
> > > > > +
> > > > >    required:
> > > > >      - compatible
> > > > >      - interrupts
> > > > > 
> > > > 
> > > > The only other way of doing this would be to complicate this in
> > > > the
> > > > driver
> > > > so that we can do something like
> > > > 
> > > > "i2s-share = <0 2>";  instead of  i2s0-share = "I2S2";
> > > > 
> > > > ...and I don't think that this would be any more
> > > > straightforward than
> > > > the
> > > > provided way.
> > > > 
> > > > There's an improvement that we can do to that pattern
> > > > description
> > > > though,
> > > > which would be explaining that declaring 'i2s0-share = "I2S2"'
> > > > means
> > > > that
> > > > I2S2's data pin will be used as DATA-OUT, while i2s0 is DATA-
> > > > IN.
> > > > 
> > > > Another thing that comes to mind here is that this is a
> > > > MediaTek
> > > > specific
> > > > property and *not* a generic one, which means that both the
> > > > driver
> > > > and
> > > > this binding should be fixed to get a "mediatek," prefix, so,
> > > > this
> > > > property
> > > > should - in reality - be "mediatek,i2s[0-35-9]-share" instead.
> > > > 
> > > > I think that everyone agrees about that, but let's see what the
> > > > others say.
> > > > 
> > > > Cheers,
> > > > Angelo
> > > 
> > > Hi Angelo,
> > > 
> > > 'i2s0-share = "I2S2"' means that if we want use I2S0, there need
> > > open
> > > I2S2 to provide clock. Conversely, if we want to use I2S2, we
> > > don't
> > > need to open I2S0. However, MediaTek I2S0 and I2S2 hardware are
> > > generally designed as input. So usually we use 'i2s0-share =
> > > "I2S1"'.
> > > Even numbers represent input, odd numbers represent output.
> > > 
> > > Yes, I think adding the "mediatek," prefix is the right way to
> > > define a
> > > non-generic property.
> > > 
> 
> Hi Jiaxin,
> 
> thank you for the insights.
> 
> > 
> > Hello Jiaxin,
> > 
> > if I get this correctly, i2s0-share = "I2S2" would be *invalid*...
> > as you
> > just explained, i2sX, where:
> > 
> > X = even number -> always DATA IN
> > X = odd number  -> always DATA OUT
> > 
> > ...this means that the dt-binding needs a pattern to specify that
> > only odd
> > can be assigned to only even.
> 
> So, the situation seems different at least on mt8192-asurada-
> spherion.
> Here, I2S8 is used for the headset microphone and I2S9 for the
> headset audio.
> Even for input and odd for output agree with Jiaxin's description.
> However, the
> input bus seems to be the main one, that is, disabling I2S8:
> 
> 	amixer cset name='UL2_CH1 I2S8_CH1' 0
> 	amixer cset name='UL2_CH2 I2S8_CH2' 0
> 
> not only disables the microphone but also the audio on the headset.
> If I add 
> 
> 	i2s9-share = "I2S8";
> 
> on the DT, then everything works, I can disable I2S8 without
> impacting the
> headset audio. So the pattern for the property on this platform is
> the opposite
> that Jiaxin mentioned. This tells me that we should keep the binding
> more
> generic (not assume where odds and evens go). I will still apply the
> other
> suggestions mentioned though.
> 
> Thanks,
> Nícolas
> 
Hi Nícolas,

From software point, I2S8 and I2S9 belong to different hardware, so if
you turn off I2S8 with CMD1, of course it will not affect I2S9.

CMD1:
amixer cset name='UL2_CH1 I2S8_CH1' 0
amixer cset name='UL2_CH2 I2S8_CH2' 0

Frome hardware point, I2S9 will use(share) I2S8's clock. If we don't
want the user to perceive this, the driver need to help do something.
So this property 'i2s9-share = "I2S8";' will be added to inform the
driver.

Best Regards,
Jiaxin Yu

> > Nicolas, take note! :-) :-)
> > 
> > Thanks,
> > Angelo
> > 
> > To unsubscribe, send mail to 
> > kernel-unsubscribe@lists.collabora.co.uk.

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[Jiaxin Yu]

On Thu, 2022-05-05 at 12:25 -0400, Nícolas F. R. A. Prado wrote:
> > 

> On Thu, May 05, 2022 at 10:52:45AM +0200, AngeloGioacchino Del Regno
> wrote:
> > Il 05/05/22 10:48, Jiaxin Yu ha scritto:
> > > On Thu, 2022-05-05 at 10:08 +0200, AngeloGioacchino Del Regno
> > > wrote:
> > > > Il 29/04/22 22:30, Nícolas F. R. A. Prado ha scritto:
> > > > > The Mediatek AFE PCM controller for MT8192 allows sharing of
> > > > > an I2S
> > > > > bus
> > > > > between two busses. Add a pattern for these properties in the
> > > > > dt-binding.
> > > > > 
> > > > > Signed-off-by: Nícolas F. R. A. Prado <
> > > > > nfraprado@collabora.com>
> > > > > ---
> > > > > 
> > > > >    Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > pcm.yaml | 5
> > > > > +++++
> > > > >    1 file changed, 5 insertions(+)
> > > > > 
> > > > > diff --git a/Documentation/devicetree/bindings/sound/mt8192-
> > > > > afe-
> > > > > pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-
> > > > > afe-
> > > > > pcm.yaml
> > > > > index 7a25bc9b8060..5b03c8dbf318 100644
> > > > > --- a/Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > pcm.yaml
> > > > > +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > pcm.yaml
> > > > > @@ -54,6 +54,11 @@ properties:
> > > > >          - const: aud_infra_clk
> > > > >          - const: aud_infra_26m_clk
> > > > > +patternProperties:
> > > > > +  "^i2s[0-35-9]-share$":
> > > > > +    description: Name of the I2S bus that is shared with
> > > > > this bus
> > > > > +    pattern: "^I2S[0-35-9]$"
> > > > > +
> > > > >    required:
> > > > >      - compatible
> > > > >      - interrupts
> > > > > 
> > > > 
> > > > The only other way of doing this would be to complicate this in
> > > > the
> > > > driver
> > > > so that we can do something like
> > > > 
> > > > "i2s-share = <0 2>";  instead of  i2s0-share = "I2S2";
> > > > 
> > > > ...and I don't think that this would be any more
> > > > straightforward than
> > > > the
> > > > provided way.
> > > > 
> > > > There's an improvement that we can do to that pattern
> > > > description
> > > > though,
> > > > which would be explaining that declaring 'i2s0-share = "I2S2"'
> > > > means
> > > > that
> > > > I2S2's data pin will be used as DATA-OUT, while i2s0 is DATA-
> > > > IN.
> > > > 
> > > > Another thing that comes to mind here is that this is a
> > > > MediaTek
> > > > specific
> > > > property and *not* a generic one, which means that both the
> > > > driver
> > > > and
> > > > this binding should be fixed to get a "mediatek," prefix, so,
> > > > this
> > > > property
> > > > should - in reality - be "mediatek,i2s[0-35-9]-share" instead.
> > > > 
> > > > I think that everyone agrees about that, but let's see what the
> > > > others say.
> > > > 
> > > > Cheers,
> > > > Angelo
> > > 
> > > Hi Angelo,
> > > 
> > > 'i2s0-share = "I2S2"' means that if we want use I2S0, there need
> > > open
> > > I2S2 to provide clock. Conversely, if we want to use I2S2, we
> > > don't
> > > need to open I2S0. However, MediaTek I2S0 and I2S2 hardware are
> > > generally designed as input. So usually we use 'i2s0-share =
> > > "I2S1"'.
> > > Even numbers represent input, odd numbers represent output.
> > > 
> > > Yes, I think adding the "mediatek," prefix is the right way to
> > > define a
> > > non-generic property.
> > > 
> 
> Hi Jiaxin,
> 
> thank you for the insights.
> 
> > 
> > Hello Jiaxin,
> > 
> > if I get this correctly, i2s0-share = "I2S2" would be *invalid*...
> > as you
> > just explained, i2sX, where:
> > 
> > X = even number -> always DATA IN
> > X = odd number  -> always DATA OUT
> > 
> > ...this means that the dt-binding needs a pattern to specify that
> > only odd
> > can be assigned to only even.
> 
> So, the situation seems different at least on mt8192-asurada-
> spherion.
> Here, I2S8 is used for the headset microphone and I2S9 for the
> headset audio.
> Even for input and odd for output agree with Jiaxin's description.
> However, the
> input bus seems to be the main one, that is, disabling I2S8:
> 
> 	amixer cset name='UL2_CH1 I2S8_CH1' 0
> 	amixer cset name='UL2_CH2 I2S8_CH2' 0
> 
> not only disables the microphone but also the audio on the headset.
> If I add 
> 
> 	i2s9-share = "I2S8";
> 
> on the DT, then everything works, I can disable I2S8 without
> impacting the
> headset audio. So the pattern for the property on this platform is
> the opposite
> that Jiaxin mentioned. This tells me that we should keep the binding
> more
> generic (not assume where odds and evens go). I will still apply the
> other
> suggestions mentioned though.
> 
> Thanks,
> Nícolas
> 
Hi Nícolas,

From software point, I2S8 and I2S9 belong to different hardware, so if
you turn off I2S8 with CMD1, of course it will not affect I2S9.

CMD1:
amixer cset name='UL2_CH1 I2S8_CH1' 0
amixer cset name='UL2_CH2 I2S8_CH2' 0

Frome hardware point, I2S9 will use(share) I2S8's clock. If we don't
want the user to perceive this, the driver need to help do something.
So this property 'i2s9-share = "I2S8";' will be added to inform the
driver.

Best Regards,
Jiaxin Yu

> > Nicolas, take note! :-) :-)
> > 
> > Thanks,
> > Angelo
> > 
> > To unsubscribe, send mail to 
> > kernel-unsubscribe@lists.collabora.co.uk.
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[Jiaxin Yu]

On Thu, 2022-05-05 at 12:25 -0400, Nícolas F. R. A. Prado wrote:
> > 

> On Thu, May 05, 2022 at 10:52:45AM +0200, AngeloGioacchino Del Regno
> wrote:
> > Il 05/05/22 10:48, Jiaxin Yu ha scritto:
> > > On Thu, 2022-05-05 at 10:08 +0200, AngeloGioacchino Del Regno
> > > wrote:
> > > > Il 29/04/22 22:30, Nícolas F. R. A. Prado ha scritto:
> > > > > The Mediatek AFE PCM controller for MT8192 allows sharing of
> > > > > an I2S
> > > > > bus
> > > > > between two busses. Add a pattern for these properties in the
> > > > > dt-binding.
> > > > > 
> > > > > Signed-off-by: Nícolas F. R. A. Prado <
> > > > > nfraprado@collabora.com>
> > > > > ---
> > > > > 
> > > > >    Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > pcm.yaml | 5
> > > > > +++++
> > > > >    1 file changed, 5 insertions(+)
> > > > > 
> > > > > diff --git a/Documentation/devicetree/bindings/sound/mt8192-
> > > > > afe-
> > > > > pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-
> > > > > afe-
> > > > > pcm.yaml
> > > > > index 7a25bc9b8060..5b03c8dbf318 100644
> > > > > --- a/Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > pcm.yaml
> > > > > +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > pcm.yaml
> > > > > @@ -54,6 +54,11 @@ properties:
> > > > >          - const: aud_infra_clk
> > > > >          - const: aud_infra_26m_clk
> > > > > +patternProperties:
> > > > > +  "^i2s[0-35-9]-share$":
> > > > > +    description: Name of the I2S bus that is shared with
> > > > > this bus
> > > > > +    pattern: "^I2S[0-35-9]$"
> > > > > +
> > > > >    required:
> > > > >      - compatible
> > > > >      - interrupts
> > > > > 
> > > > 
> > > > The only other way of doing this would be to complicate this in
> > > > the
> > > > driver
> > > > so that we can do something like
> > > > 
> > > > "i2s-share = <0 2>";  instead of  i2s0-share = "I2S2";
> > > > 
> > > > ...and I don't think that this would be any more
> > > > straightforward than
> > > > the
> > > > provided way.
> > > > 
> > > > There's an improvement that we can do to that pattern
> > > > description
> > > > though,
> > > > which would be explaining that declaring 'i2s0-share = "I2S2"'
> > > > means
> > > > that
> > > > I2S2's data pin will be used as DATA-OUT, while i2s0 is DATA-
> > > > IN.
> > > > 
> > > > Another thing that comes to mind here is that this is a
> > > > MediaTek
> > > > specific
> > > > property and *not* a generic one, which means that both the
> > > > driver
> > > > and
> > > > this binding should be fixed to get a "mediatek," prefix, so,
> > > > this
> > > > property
> > > > should - in reality - be "mediatek,i2s[0-35-9]-share" instead.
> > > > 
> > > > I think that everyone agrees about that, but let's see what the
> > > > others say.
> > > > 
> > > > Cheers,
> > > > Angelo
> > > 
> > > Hi Angelo,
> > > 
> > > 'i2s0-share = "I2S2"' means that if we want use I2S0, there need
> > > open
> > > I2S2 to provide clock. Conversely, if we want to use I2S2, we
> > > don't
> > > need to open I2S0. However, MediaTek I2S0 and I2S2 hardware are
> > > generally designed as input. So usually we use 'i2s0-share =
> > > "I2S1"'.
> > > Even numbers represent input, odd numbers represent output.
> > > 
> > > Yes, I think adding the "mediatek," prefix is the right way to
> > > define a
> > > non-generic property.
> > > 
> 
> Hi Jiaxin,
> 
> thank you for the insights.
> 
> > 
> > Hello Jiaxin,
> > 
> > if I get this correctly, i2s0-share = "I2S2" would be *invalid*...
> > as you
> > just explained, i2sX, where:
> > 
> > X = even number -> always DATA IN
> > X = odd number  -> always DATA OUT
> > 
> > ...this means that the dt-binding needs a pattern to specify that
> > only odd
> > can be assigned to only even.
> 
> So, the situation seems different at least on mt8192-asurada-
> spherion.
> Here, I2S8 is used for the headset microphone and I2S9 for the
> headset audio.
> Even for input and odd for output agree with Jiaxin's description.
> However, the
> input bus seems to be the main one, that is, disabling I2S8:
> 
> 	amixer cset name='UL2_CH1 I2S8_CH1' 0
> 	amixer cset name='UL2_CH2 I2S8_CH2' 0
> 
> not only disables the microphone but also the audio on the headset.
> If I add 
> 
> 	i2s9-share = "I2S8";
> 
> on the DT, then everything works, I can disable I2S8 without
> impacting the
> headset audio. So the pattern for the property on this platform is
> the opposite
> that Jiaxin mentioned. This tells me that we should keep the binding
> more
> generic (not assume where odds and evens go). I will still apply the
> other
> suggestions mentioned though.
> 
> Thanks,
> Nícolas
> 
Hi Nícolas,

From software point, I2S8 and I2S9 belong to different hardware, so if
you turn off I2S8 with CMD1, of course it will not affect I2S9.

CMD1:
amixer cset name='UL2_CH1 I2S8_CH1' 0
amixer cset name='UL2_CH2 I2S8_CH2' 0

Frome hardware point, I2S9 will use(share) I2S8's clock. If we don't
want the user to perceive this, the driver need to help do something.
So this property 'i2s9-share = "I2S8";' will be added to inform the
driver.

Best Regards,
Jiaxin Yu

> > Nicolas, take note! :-) :-)
> > 
> > Thanks,
> > Angelo
> > 
> > To unsubscribe, send mail to 
> > kernel-unsubscribe@lists.collabora.co.uk.

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[Jiaxin Yu]

On Thu, 2022-05-05 at 12:25 -0400, Nícolas F. R. A. Prado wrote:
> > 

> On Thu, May 05, 2022 at 10:52:45AM +0200, AngeloGioacchino Del Regno
> wrote:
> > Il 05/05/22 10:48, Jiaxin Yu ha scritto:
> > > On Thu, 2022-05-05 at 10:08 +0200, AngeloGioacchino Del Regno
> > > wrote:
> > > > Il 29/04/22 22:30, Nícolas F. R. A. Prado ha scritto:
> > > > > The Mediatek AFE PCM controller for MT8192 allows sharing of
> > > > > an I2S
> > > > > bus
> > > > > between two busses. Add a pattern for these properties in the
> > > > > dt-binding.
> > > > > 
> > > > > Signed-off-by: Nícolas F. R. A. Prado <
> > > > > nfraprado@collabora.com>
> > > > > ---
> > > > > 
> > > > >    Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > pcm.yaml | 5
> > > > > +++++
> > > > >    1 file changed, 5 insertions(+)
> > > > > 
> > > > > diff --git a/Documentation/devicetree/bindings/sound/mt8192-
> > > > > afe-
> > > > > pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-
> > > > > afe-
> > > > > pcm.yaml
> > > > > index 7a25bc9b8060..5b03c8dbf318 100644
> > > > > --- a/Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > pcm.yaml
> > > > > +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > pcm.yaml
> > > > > @@ -54,6 +54,11 @@ properties:
> > > > >          - const: aud_infra_clk
> > > > >          - const: aud_infra_26m_clk
> > > > > +patternProperties:
> > > > > +  "^i2s[0-35-9]-share$":
> > > > > +    description: Name of the I2S bus that is shared with
> > > > > this bus
> > > > > +    pattern: "^I2S[0-35-9]$"
> > > > > +
> > > > >    required:
> > > > >      - compatible
> > > > >      - interrupts
> > > > > 
> > > > 
> > > > The only other way of doing this would be to complicate this in
> > > > the
> > > > driver
> > > > so that we can do something like
> > > > 
> > > > "i2s-share = <0 2>";  instead of  i2s0-share = "I2S2";
> > > > 
> > > > ...and I don't think that this would be any more
> > > > straightforward than
> > > > the
> > > > provided way.
> > > > 
> > > > There's an improvement that we can do to that pattern
> > > > description
> > > > though,
> > > > which would be explaining that declaring 'i2s0-share = "I2S2"'
> > > > means
> > > > that
> > > > I2S2's data pin will be used as DATA-OUT, while i2s0 is DATA-
> > > > IN.
> > > > 
> > > > Another thing that comes to mind here is that this is a
> > > > MediaTek
> > > > specific
> > > > property and *not* a generic one, which means that both the
> > > > driver
> > > > and
> > > > this binding should be fixed to get a "mediatek," prefix, so,
> > > > this
> > > > property
> > > > should - in reality - be "mediatek,i2s[0-35-9]-share" instead.
> > > > 
> > > > I think that everyone agrees about that, but let's see what the
> > > > others say.
> > > > 
> > > > Cheers,
> > > > Angelo
> > > 
> > > Hi Angelo,
> > > 
> > > 'i2s0-share = "I2S2"' means that if we want use I2S0, there need
> > > open
> > > I2S2 to provide clock. Conversely, if we want to use I2S2, we
> > > don't
> > > need to open I2S0. However, MediaTek I2S0 and I2S2 hardware are
> > > generally designed as input. So usually we use 'i2s0-share =
> > > "I2S1"'.
> > > Even numbers represent input, odd numbers represent output.
> > > 
> > > Yes, I think adding the "mediatek," prefix is the right way to
> > > define a
> > > non-generic property.
> > > 
> 
> Hi Jiaxin,
> 
> thank you for the insights.
> 
> > 
> > Hello Jiaxin,
> > 
> > if I get this correctly, i2s0-share = "I2S2" would be *invalid*...
> > as you
> > just explained, i2sX, where:
> > 
> > X = even number -> always DATA IN
> > X = odd number  -> always DATA OUT
> > 
> > ...this means that the dt-binding needs a pattern to specify that
> > only odd
> > can be assigned to only even.
> 
> So, the situation seems different at least on mt8192-asurada-
> spherion.
> Here, I2S8 is used for the headset microphone and I2S9 for the
> headset audio.
> Even for input and odd for output agree with Jiaxin's description.
> However, the
> input bus seems to be the main one, that is, disabling I2S8:
> 
> 	amixer cset name='UL2_CH1 I2S8_CH1' 0
> 	amixer cset name='UL2_CH2 I2S8_CH2' 0
> 
> not only disables the microphone but also the audio on the headset.
> If I add 
> 
> 	i2s9-share = "I2S8";
> 
> on the DT, then everything works, I can disable I2S8 without
> impacting the
> headset audio. So the pattern for the property on this platform is
> the opposite
> that Jiaxin mentioned. This tells me that we should keep the binding
> more
> generic (not assume where odds and evens go). I will still apply the
> other
> suggestions mentioned though.
> 
> Thanks,
> Nícolas
> 
Hi Nícolas,

From software point, I2S8 and I2S9 belong to different hardware, so if
you turn off I2S8 with CMD1, of course it will not affect I2S9.

CMD1:
amixer cset name='UL2_CH1 I2S8_CH1' 0
amixer cset name='UL2_CH2 I2S8_CH2' 0

Frome hardware point, I2S9 will use(share) I2S8's clock. If we don't
want the user to perceive this, the driver need to help do something.
So this property 'i2s9-share = "I2S8";' will be added to inform the
driver.

Best Regards,
Jiaxin Yu

> > Nicolas, take note! :-) :-)
> > 
> > Thanks,
> > Angelo
> > 
> > To unsubscribe, send mail to 
> > kernel-unsubscribe@lists.collabora.co.uk.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[Nícolas F. R. A. Prado]

On Fri, May 06, 2022 at 01:45:24PM +0800, Jiaxin Yu wrote:
> On Thu, 2022-05-05 at 12:25 -0400, Nícolas F. R. A. Prado wrote:
> > > 
> 
> > On Thu, May 05, 2022 at 10:52:45AM +0200, AngeloGioacchino Del Regno
> > wrote:
> > > Il 05/05/22 10:48, Jiaxin Yu ha scritto:
> > > > On Thu, 2022-05-05 at 10:08 +0200, AngeloGioacchino Del Regno
> > > > wrote:
> > > > > Il 29/04/22 22:30, Nícolas F. R. A. Prado ha scritto:
> > > > > > The Mediatek AFE PCM controller for MT8192 allows sharing of
> > > > > > an I2S
> > > > > > bus
> > > > > > between two busses. Add a pattern for these properties in the
> > > > > > dt-binding.
> > > > > > 
> > > > > > Signed-off-by: Nícolas F. R. A. Prado <
> > > > > > nfraprado@collabora.com>
> > > > > > ---
> > > > > > 
> > > > > >    Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > > pcm.yaml | 5
> > > > > > +++++
> > > > > >    1 file changed, 5 insertions(+)
> > > > > > 
> > > > > > diff --git a/Documentation/devicetree/bindings/sound/mt8192-
> > > > > > afe-
> > > > > > pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-
> > > > > > afe-
> > > > > > pcm.yaml
> > > > > > index 7a25bc9b8060..5b03c8dbf318 100644
> > > > > > --- a/Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > > pcm.yaml
> > > > > > +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > > pcm.yaml
> > > > > > @@ -54,6 +54,11 @@ properties:
> > > > > >          - const: aud_infra_clk
> > > > > >          - const: aud_infra_26m_clk
> > > > > > +patternProperties:
> > > > > > +  "^i2s[0-35-9]-share$":
> > > > > > +    description: Name of the I2S bus that is shared with
> > > > > > this bus
> > > > > > +    pattern: "^I2S[0-35-9]$"
> > > > > > +
> > > > > >    required:
> > > > > >      - compatible
> > > > > >      - interrupts
> > > > > > 
> > > > > 
> > > > > The only other way of doing this would be to complicate this in
> > > > > the
> > > > > driver
> > > > > so that we can do something like
> > > > > 
> > > > > "i2s-share = <0 2>";  instead of  i2s0-share = "I2S2";
> > > > > 
> > > > > ...and I don't think that this would be any more
> > > > > straightforward than
> > > > > the
> > > > > provided way.
> > > > > 
> > > > > There's an improvement that we can do to that pattern
> > > > > description
> > > > > though,
> > > > > which would be explaining that declaring 'i2s0-share = "I2S2"'
> > > > > means
> > > > > that
> > > > > I2S2's data pin will be used as DATA-OUT, while i2s0 is DATA-
> > > > > IN.
> > > > > 
> > > > > Another thing that comes to mind here is that this is a
> > > > > MediaTek
> > > > > specific
> > > > > property and *not* a generic one, which means that both the
> > > > > driver
> > > > > and
> > > > > this binding should be fixed to get a "mediatek," prefix, so,
> > > > > this
> > > > > property
> > > > > should - in reality - be "mediatek,i2s[0-35-9]-share" instead.
> > > > > 
> > > > > I think that everyone agrees about that, but let's see what the
> > > > > others say.
> > > > > 
> > > > > Cheers,
> > > > > Angelo
> > > > 
> > > > Hi Angelo,
> > > > 
> > > > 'i2s0-share = "I2S2"' means that if we want use I2S0, there need
> > > > open
> > > > I2S2 to provide clock. Conversely, if we want to use I2S2, we
> > > > don't
> > > > need to open I2S0. However, MediaTek I2S0 and I2S2 hardware are
> > > > generally designed as input. So usually we use 'i2s0-share =
> > > > "I2S1"'.
> > > > Even numbers represent input, odd numbers represent output.
> > > > 
> > > > Yes, I think adding the "mediatek," prefix is the right way to
> > > > define a
> > > > non-generic property.
> > > > 
> > 
> > Hi Jiaxin,
> > 
> > thank you for the insights.
> > 
> > > 
> > > Hello Jiaxin,
> > > 
> > > if I get this correctly, i2s0-share = "I2S2" would be *invalid*...
> > > as you
> > > just explained, i2sX, where:
> > > 
> > > X = even number -> always DATA IN
> > > X = odd number  -> always DATA OUT
> > > 
> > > ...this means that the dt-binding needs a pattern to specify that
> > > only odd
> > > can be assigned to only even.
> > 
> > So, the situation seems different at least on mt8192-asurada-
> > spherion.
> > Here, I2S8 is used for the headset microphone and I2S9 for the
> > headset audio.
> > Even for input and odd for output agree with Jiaxin's description.
> > However, the
> > input bus seems to be the main one, that is, disabling I2S8:
> > 
> > 	amixer cset name='UL2_CH1 I2S8_CH1' 0
> > 	amixer cset name='UL2_CH2 I2S8_CH2' 0
> > 
> > not only disables the microphone but also the audio on the headset.
> > If I add 
> > 
> > 	i2s9-share = "I2S8";
> > 
> > on the DT, then everything works, I can disable I2S8 without
> > impacting the
> > headset audio. So the pattern for the property on this platform is
> > the opposite
> > that Jiaxin mentioned. This tells me that we should keep the binding
> > more
> > generic (not assume where odds and evens go). I will still apply the
> > other
> > suggestions mentioned though.
> > 
> > Thanks,
> > Nícolas
> > 
> Hi Nícolas,
> 
> From software point, I2S8 and I2S9 belong to different hardware, so if
> you turn off I2S8 with CMD1, of course it will not affect I2S9.
> 
> CMD1:
> amixer cset name='UL2_CH1 I2S8_CH1' 0
> amixer cset name='UL2_CH2 I2S8_CH2' 0
> 
> Frome hardware point, I2S9 will use(share) I2S8's clock. If we don't
> want the user to perceive this, the driver need to help do something.
> So this property 'i2s9-share = "I2S8";' will be added to inform the
> driver.

Hi Jiaxin,

yes, that's what I figured. What I was saying is that for the binding, your
example was

i2s0-share = "I2S1"
   ^ even,input  ^ odd,output

while on mt8192-asurada-spherion the use case is

i2s9-share = "I2S8";
   ^ odd,output  ^ even,input

So Angelo's idea to require in the dt-binding that the left side is always even
(input) and the right side always odd (based on your example), wouldn't work for
my use case.

Basically it's a question of whether the input always shares the clock from an
output (your example), or if output always shares the clock from an input (my
use case), or if both are valid. I'm taking from this that both are valid, so I
won't add any such restriction in the dt-binding in the following version, but
do let me know if this is not the case.

Thanks,
Nícolas

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[Nícolas F. R. A. Prado]

On Fri, May 06, 2022 at 01:45:24PM +0800, Jiaxin Yu wrote:
> On Thu, 2022-05-05 at 12:25 -0400, Nícolas F. R. A. Prado wrote:
> > > 
> 
> > On Thu, May 05, 2022 at 10:52:45AM +0200, AngeloGioacchino Del Regno
> > wrote:
> > > Il 05/05/22 10:48, Jiaxin Yu ha scritto:
> > > > On Thu, 2022-05-05 at 10:08 +0200, AngeloGioacchino Del Regno
> > > > wrote:
> > > > > Il 29/04/22 22:30, Nícolas F. R. A. Prado ha scritto:
> > > > > > The Mediatek AFE PCM controller for MT8192 allows sharing of
> > > > > > an I2S
> > > > > > bus
> > > > > > between two busses. Add a pattern for these properties in the
> > > > > > dt-binding.
> > > > > > 
> > > > > > Signed-off-by: Nícolas F. R. A. Prado <
> > > > > > nfraprado@collabora.com>
> > > > > > ---
> > > > > > 
> > > > > >    Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > > pcm.yaml | 5
> > > > > > +++++
> > > > > >    1 file changed, 5 insertions(+)
> > > > > > 
> > > > > > diff --git a/Documentation/devicetree/bindings/sound/mt8192-
> > > > > > afe-
> > > > > > pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-
> > > > > > afe-
> > > > > > pcm.yaml
> > > > > > index 7a25bc9b8060..5b03c8dbf318 100644
> > > > > > --- a/Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > > pcm.yaml
> > > > > > +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > > pcm.yaml
> > > > > > @@ -54,6 +54,11 @@ properties:
> > > > > >          - const: aud_infra_clk
> > > > > >          - const: aud_infra_26m_clk
> > > > > > +patternProperties:
> > > > > > +  "^i2s[0-35-9]-share$":
> > > > > > +    description: Name of the I2S bus that is shared with
> > > > > > this bus
> > > > > > +    pattern: "^I2S[0-35-9]$"
> > > > > > +
> > > > > >    required:
> > > > > >      - compatible
> > > > > >      - interrupts
> > > > > > 
> > > > > 
> > > > > The only other way of doing this would be to complicate this in
> > > > > the
> > > > > driver
> > > > > so that we can do something like
> > > > > 
> > > > > "i2s-share = <0 2>";  instead of  i2s0-share = "I2S2";
> > > > > 
> > > > > ...and I don't think that this would be any more
> > > > > straightforward than
> > > > > the
> > > > > provided way.
> > > > > 
> > > > > There's an improvement that we can do to that pattern
> > > > > description
> > > > > though,
> > > > > which would be explaining that declaring 'i2s0-share = "I2S2"'
> > > > > means
> > > > > that
> > > > > I2S2's data pin will be used as DATA-OUT, while i2s0 is DATA-
> > > > > IN.
> > > > > 
> > > > > Another thing that comes to mind here is that this is a
> > > > > MediaTek
> > > > > specific
> > > > > property and *not* a generic one, which means that both the
> > > > > driver
> > > > > and
> > > > > this binding should be fixed to get a "mediatek," prefix, so,
> > > > > this
> > > > > property
> > > > > should - in reality - be "mediatek,i2s[0-35-9]-share" instead.
> > > > > 
> > > > > I think that everyone agrees about that, but let's see what the
> > > > > others say.
> > > > > 
> > > > > Cheers,
> > > > > Angelo
> > > > 
> > > > Hi Angelo,
> > > > 
> > > > 'i2s0-share = "I2S2"' means that if we want use I2S0, there need
> > > > open
> > > > I2S2 to provide clock. Conversely, if we want to use I2S2, we
> > > > don't
> > > > need to open I2S0. However, MediaTek I2S0 and I2S2 hardware are
> > > > generally designed as input. So usually we use 'i2s0-share =
> > > > "I2S1"'.
> > > > Even numbers represent input, odd numbers represent output.
> > > > 
> > > > Yes, I think adding the "mediatek," prefix is the right way to
> > > > define a
> > > > non-generic property.
> > > > 
> > 
> > Hi Jiaxin,
> > 
> > thank you for the insights.
> > 
> > > 
> > > Hello Jiaxin,
> > > 
> > > if I get this correctly, i2s0-share = "I2S2" would be *invalid*...
> > > as you
> > > just explained, i2sX, where:
> > > 
> > > X = even number -> always DATA IN
> > > X = odd number  -> always DATA OUT
> > > 
> > > ...this means that the dt-binding needs a pattern to specify that
> > > only odd
> > > can be assigned to only even.
> > 
> > So, the situation seems different at least on mt8192-asurada-
> > spherion.
> > Here, I2S8 is used for the headset microphone and I2S9 for the
> > headset audio.
> > Even for input and odd for output agree with Jiaxin's description.
> > However, the
> > input bus seems to be the main one, that is, disabling I2S8:
> > 
> > 	amixer cset name='UL2_CH1 I2S8_CH1' 0
> > 	amixer cset name='UL2_CH2 I2S8_CH2' 0
> > 
> > not only disables the microphone but also the audio on the headset.
> > If I add 
> > 
> > 	i2s9-share = "I2S8";
> > 
> > on the DT, then everything works, I can disable I2S8 without
> > impacting the
> > headset audio. So the pattern for the property on this platform is
> > the opposite
> > that Jiaxin mentioned. This tells me that we should keep the binding
> > more
> > generic (not assume where odds and evens go). I will still apply the
> > other
> > suggestions mentioned though.
> > 
> > Thanks,
> > Nícolas
> > 
> Hi Nícolas,
> 
> From software point, I2S8 and I2S9 belong to different hardware, so if
> you turn off I2S8 with CMD1, of course it will not affect I2S9.
> 
> CMD1:
> amixer cset name='UL2_CH1 I2S8_CH1' 0
> amixer cset name='UL2_CH2 I2S8_CH2' 0
> 
> Frome hardware point, I2S9 will use(share) I2S8's clock. If we don't
> want the user to perceive this, the driver need to help do something.
> So this property 'i2s9-share = "I2S8";' will be added to inform the
> driver.

Hi Jiaxin,

yes, that's what I figured. What I was saying is that for the binding, your
example was

i2s0-share = "I2S1"
   ^ even,input  ^ odd,output

while on mt8192-asurada-spherion the use case is

i2s9-share = "I2S8";
   ^ odd,output  ^ even,input

So Angelo's idea to require in the dt-binding that the left side is always even
(input) and the right side always odd (based on your example), wouldn't work for
my use case.

Basically it's a question of whether the input always shares the clock from an
output (your example), or if output always shares the clock from an input (my
use case), or if both are valid. I'm taking from this that both are valid, so I
won't add any such restriction in the dt-binding in the following version, but
do let me know if this is not the case.

Thanks,
Nícolas

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[Nícolas F. R. A. Prado]

On Fri, May 06, 2022 at 01:45:24PM +0800, Jiaxin Yu wrote:
> On Thu, 2022-05-05 at 12:25 -0400, Nícolas F. R. A. Prado wrote:
> > > 
> 
> > On Thu, May 05, 2022 at 10:52:45AM +0200, AngeloGioacchino Del Regno
> > wrote:
> > > Il 05/05/22 10:48, Jiaxin Yu ha scritto:
> > > > On Thu, 2022-05-05 at 10:08 +0200, AngeloGioacchino Del Regno
> > > > wrote:
> > > > > Il 29/04/22 22:30, Nícolas F. R. A. Prado ha scritto:
> > > > > > The Mediatek AFE PCM controller for MT8192 allows sharing of
> > > > > > an I2S
> > > > > > bus
> > > > > > between two busses. Add a pattern for these properties in the
> > > > > > dt-binding.
> > > > > > 
> > > > > > Signed-off-by: Nícolas F. R. A. Prado <
> > > > > > nfraprado@collabora.com>
> > > > > > ---
> > > > > > 
> > > > > >    Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > > pcm.yaml | 5
> > > > > > +++++
> > > > > >    1 file changed, 5 insertions(+)
> > > > > > 
> > > > > > diff --git a/Documentation/devicetree/bindings/sound/mt8192-
> > > > > > afe-
> > > > > > pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-
> > > > > > afe-
> > > > > > pcm.yaml
> > > > > > index 7a25bc9b8060..5b03c8dbf318 100644
> > > > > > --- a/Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > > pcm.yaml
> > > > > > +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > > pcm.yaml
> > > > > > @@ -54,6 +54,11 @@ properties:
> > > > > >          - const: aud_infra_clk
> > > > > >          - const: aud_infra_26m_clk
> > > > > > +patternProperties:
> > > > > > +  "^i2s[0-35-9]-share$":
> > > > > > +    description: Name of the I2S bus that is shared with
> > > > > > this bus
> > > > > > +    pattern: "^I2S[0-35-9]$"
> > > > > > +
> > > > > >    required:
> > > > > >      - compatible
> > > > > >      - interrupts
> > > > > > 
> > > > > 
> > > > > The only other way of doing this would be to complicate this in
> > > > > the
> > > > > driver
> > > > > so that we can do something like
> > > > > 
> > > > > "i2s-share = <0 2>";  instead of  i2s0-share = "I2S2";
> > > > > 
> > > > > ...and I don't think that this would be any more
> > > > > straightforward than
> > > > > the
> > > > > provided way.
> > > > > 
> > > > > There's an improvement that we can do to that pattern
> > > > > description
> > > > > though,
> > > > > which would be explaining that declaring 'i2s0-share = "I2S2"'
> > > > > means
> > > > > that
> > > > > I2S2's data pin will be used as DATA-OUT, while i2s0 is DATA-
> > > > > IN.
> > > > > 
> > > > > Another thing that comes to mind here is that this is a
> > > > > MediaTek
> > > > > specific
> > > > > property and *not* a generic one, which means that both the
> > > > > driver
> > > > > and
> > > > > this binding should be fixed to get a "mediatek," prefix, so,
> > > > > this
> > > > > property
> > > > > should - in reality - be "mediatek,i2s[0-35-9]-share" instead.
> > > > > 
> > > > > I think that everyone agrees about that, but let's see what the
> > > > > others say.
> > > > > 
> > > > > Cheers,
> > > > > Angelo
> > > > 
> > > > Hi Angelo,
> > > > 
> > > > 'i2s0-share = "I2S2"' means that if we want use I2S0, there need
> > > > open
> > > > I2S2 to provide clock. Conversely, if we want to use I2S2, we
> > > > don't
> > > > need to open I2S0. However, MediaTek I2S0 and I2S2 hardware are
> > > > generally designed as input. So usually we use 'i2s0-share =
> > > > "I2S1"'.
> > > > Even numbers represent input, odd numbers represent output.
> > > > 
> > > > Yes, I think adding the "mediatek," prefix is the right way to
> > > > define a
> > > > non-generic property.
> > > > 
> > 
> > Hi Jiaxin,
> > 
> > thank you for the insights.
> > 
> > > 
> > > Hello Jiaxin,
> > > 
> > > if I get this correctly, i2s0-share = "I2S2" would be *invalid*...
> > > as you
> > > just explained, i2sX, where:
> > > 
> > > X = even number -> always DATA IN
> > > X = odd number  -> always DATA OUT
> > > 
> > > ...this means that the dt-binding needs a pattern to specify that
> > > only odd
> > > can be assigned to only even.
> > 
> > So, the situation seems different at least on mt8192-asurada-
> > spherion.
> > Here, I2S8 is used for the headset microphone and I2S9 for the
> > headset audio.
> > Even for input and odd for output agree with Jiaxin's description.
> > However, the
> > input bus seems to be the main one, that is, disabling I2S8:
> > 
> > 	amixer cset name='UL2_CH1 I2S8_CH1' 0
> > 	amixer cset name='UL2_CH2 I2S8_CH2' 0
> > 
> > not only disables the microphone but also the audio on the headset.
> > If I add 
> > 
> > 	i2s9-share = "I2S8";
> > 
> > on the DT, then everything works, I can disable I2S8 without
> > impacting the
> > headset audio. So the pattern for the property on this platform is
> > the opposite
> > that Jiaxin mentioned. This tells me that we should keep the binding
> > more
> > generic (not assume where odds and evens go). I will still apply the
> > other
> > suggestions mentioned though.
> > 
> > Thanks,
> > Nícolas
> > 
> Hi Nícolas,
> 
> From software point, I2S8 and I2S9 belong to different hardware, so if
> you turn off I2S8 with CMD1, of course it will not affect I2S9.
> 
> CMD1:
> amixer cset name='UL2_CH1 I2S8_CH1' 0
> amixer cset name='UL2_CH2 I2S8_CH2' 0
> 
> Frome hardware point, I2S9 will use(share) I2S8's clock. If we don't
> want the user to perceive this, the driver need to help do something.
> So this property 'i2s9-share = "I2S8";' will be added to inform the
> driver.

Hi Jiaxin,

yes, that's what I figured. What I was saying is that for the binding, your
example was

i2s0-share = "I2S1"
   ^ even,input  ^ odd,output

while on mt8192-asurada-spherion the use case is

i2s9-share = "I2S8";
   ^ odd,output  ^ even,input

So Angelo's idea to require in the dt-binding that the left side is always even
(input) and the right side always odd (based on your example), wouldn't work for
my use case.

Basically it's a question of whether the input always shares the clock from an
output (your example), or if output always shares the clock from an input (my
use case), or if both are valid. I'm taking from this that both are valid, so I
won't add any such restriction in the dt-binding in the following version, but
do let me know if this is not the case.

Thanks,
Nícolas

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[Nícolas F. R. A. Prado]

On Fri, May 06, 2022 at 01:45:24PM +0800, Jiaxin Yu wrote:
> On Thu, 2022-05-05 at 12:25 -0400, Nícolas F. R. A. Prado wrote:
> > > 
> 
> > On Thu, May 05, 2022 at 10:52:45AM +0200, AngeloGioacchino Del Regno
> > wrote:
> > > Il 05/05/22 10:48, Jiaxin Yu ha scritto:
> > > > On Thu, 2022-05-05 at 10:08 +0200, AngeloGioacchino Del Regno
> > > > wrote:
> > > > > Il 29/04/22 22:30, Nícolas F. R. A. Prado ha scritto:
> > > > > > The Mediatek AFE PCM controller for MT8192 allows sharing of
> > > > > > an I2S
> > > > > > bus
> > > > > > between two busses. Add a pattern for these properties in the
> > > > > > dt-binding.
> > > > > > 
> > > > > > Signed-off-by: Nícolas F. R. A. Prado <
> > > > > > nfraprado@collabora.com>
> > > > > > ---
> > > > > > 
> > > > > >    Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > > pcm.yaml | 5
> > > > > > +++++
> > > > > >    1 file changed, 5 insertions(+)
> > > > > > 
> > > > > > diff --git a/Documentation/devicetree/bindings/sound/mt8192-
> > > > > > afe-
> > > > > > pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-
> > > > > > afe-
> > > > > > pcm.yaml
> > > > > > index 7a25bc9b8060..5b03c8dbf318 100644
> > > > > > --- a/Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > > pcm.yaml
> > > > > > +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > > pcm.yaml
> > > > > > @@ -54,6 +54,11 @@ properties:
> > > > > >          - const: aud_infra_clk
> > > > > >          - const: aud_infra_26m_clk
> > > > > > +patternProperties:
> > > > > > +  "^i2s[0-35-9]-share$":
> > > > > > +    description: Name of the I2S bus that is shared with
> > > > > > this bus
> > > > > > +    pattern: "^I2S[0-35-9]$"
> > > > > > +
> > > > > >    required:
> > > > > >      - compatible
> > > > > >      - interrupts
> > > > > > 
> > > > > 
> > > > > The only other way of doing this would be to complicate this in
> > > > > the
> > > > > driver
> > > > > so that we can do something like
> > > > > 
> > > > > "i2s-share = <0 2>";  instead of  i2s0-share = "I2S2";
> > > > > 
> > > > > ...and I don't think that this would be any more
> > > > > straightforward than
> > > > > the
> > > > > provided way.
> > > > > 
> > > > > There's an improvement that we can do to that pattern
> > > > > description
> > > > > though,
> > > > > which would be explaining that declaring 'i2s0-share = "I2S2"'
> > > > > means
> > > > > that
> > > > > I2S2's data pin will be used as DATA-OUT, while i2s0 is DATA-
> > > > > IN.
> > > > > 
> > > > > Another thing that comes to mind here is that this is a
> > > > > MediaTek
> > > > > specific
> > > > > property and *not* a generic one, which means that both the
> > > > > driver
> > > > > and
> > > > > this binding should be fixed to get a "mediatek," prefix, so,
> > > > > this
> > > > > property
> > > > > should - in reality - be "mediatek,i2s[0-35-9]-share" instead.
> > > > > 
> > > > > I think that everyone agrees about that, but let's see what the
> > > > > others say.
> > > > > 
> > > > > Cheers,
> > > > > Angelo
> > > > 
> > > > Hi Angelo,
> > > > 
> > > > 'i2s0-share = "I2S2"' means that if we want use I2S0, there need
> > > > open
> > > > I2S2 to provide clock. Conversely, if we want to use I2S2, we
> > > > don't
> > > > need to open I2S0. However, MediaTek I2S0 and I2S2 hardware are
> > > > generally designed as input. So usually we use 'i2s0-share =
> > > > "I2S1"'.
> > > > Even numbers represent input, odd numbers represent output.
> > > > 
> > > > Yes, I think adding the "mediatek," prefix is the right way to
> > > > define a
> > > > non-generic property.
> > > > 
> > 
> > Hi Jiaxin,
> > 
> > thank you for the insights.
> > 
> > > 
> > > Hello Jiaxin,
> > > 
> > > if I get this correctly, i2s0-share = "I2S2" would be *invalid*...
> > > as you
> > > just explained, i2sX, where:
> > > 
> > > X = even number -> always DATA IN
> > > X = odd number  -> always DATA OUT
> > > 
> > > ...this means that the dt-binding needs a pattern to specify that
> > > only odd
> > > can be assigned to only even.
> > 
> > So, the situation seems different at least on mt8192-asurada-
> > spherion.
> > Here, I2S8 is used for the headset microphone and I2S9 for the
> > headset audio.
> > Even for input and odd for output agree with Jiaxin's description.
> > However, the
> > input bus seems to be the main one, that is, disabling I2S8:
> > 
> > 	amixer cset name='UL2_CH1 I2S8_CH1' 0
> > 	amixer cset name='UL2_CH2 I2S8_CH2' 0
> > 
> > not only disables the microphone but also the audio on the headset.
> > If I add 
> > 
> > 	i2s9-share = "I2S8";
> > 
> > on the DT, then everything works, I can disable I2S8 without
> > impacting the
> > headset audio. So the pattern for the property on this platform is
> > the opposite
> > that Jiaxin mentioned. This tells me that we should keep the binding
> > more
> > generic (not assume where odds and evens go). I will still apply the
> > other
> > suggestions mentioned though.
> > 
> > Thanks,
> > Nícolas
> > 
> Hi Nícolas,
> 
> From software point, I2S8 and I2S9 belong to different hardware, so if
> you turn off I2S8 with CMD1, of course it will not affect I2S9.
> 
> CMD1:
> amixer cset name='UL2_CH1 I2S8_CH1' 0
> amixer cset name='UL2_CH2 I2S8_CH2' 0
> 
> Frome hardware point, I2S9 will use(share) I2S8's clock. If we don't
> want the user to perceive this, the driver need to help do something.
> So this property 'i2s9-share = "I2S8";' will be added to inform the
> driver.

Hi Jiaxin,

yes, that's what I figured. What I was saying is that for the binding, your
example was

i2s0-share = "I2S1"
   ^ even,input  ^ odd,output

while on mt8192-asurada-spherion the use case is

i2s9-share = "I2S8";
   ^ odd,output  ^ even,input

So Angelo's idea to require in the dt-binding that the left side is always even
(input) and the right side always odd (based on your example), wouldn't work for
my use case.

Basically it's a question of whether the input always shares the clock from an
output (your example), or if output always shares the clock from an input (my
use case), or if both are valid. I'm taking from this that both are valid, so I
won't add any such restriction in the dt-binding in the following version, but
do let me know if this is not the case.

Thanks,
Nícolas

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[Jiaxin Yu]

On Fri, 2022-05-06 at 10:09 -0400, Nícolas F. R. A. Prado wrote:
> On Fri, May 06, 2022 at 01:45:24PM +0800, Jiaxin Yu wrote:
> > On Thu, 2022-05-05 at 12:25 -0400, Nícolas F. R. A. Prado wrote:
> > > > 
> > > On Thu, May 05, 2022 at 10:52:45AM +0200, AngeloGioacchino Del
> > > Regno
> > > wrote:
> > > > Il 05/05/22 10:48, Jiaxin Yu ha scritto:
> > > > > On Thu, 2022-05-05 at 10:08 +0200, AngeloGioacchino Del Regno
> > > > > wrote:
> > > > > > Il 29/04/22 22:30, Nícolas F. R. A. Prado ha scritto:
> > > > > > > The Mediatek AFE PCM controller for MT8192 allows sharing
> > > > > > > of
> > > > > > > an I2S
> > > > > > > bus
> > > > > > > between two busses. Add a pattern for these properties in
> > > > > > > the
> > > > > > > dt-binding.
> > > > > > > 
> > > > > > > Signed-off-by: Nícolas F. R. A. Prado <
> > > > > > > nfraprado@collabora.com>
> > > > > > > ---
> > > > > > > 
> > > > > > >    Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > > > pcm.yaml | 5
> > > > > > > +++++
> > > > > > >    1 file changed, 5 insertions(+)
> > > > > > > 
> > > > > > > diff --git
> > > > > > > a/Documentation/devicetree/bindings/sound/mt8192-
> > > > > > > afe-
> > > > > > > pcm.yaml
> > > > > > > b/Documentation/devicetree/bindings/sound/mt8192-
> > > > > > > afe-
> > > > > > > pcm.yaml
> > > > > > > index 7a25bc9b8060..5b03c8dbf318 100644
> > > > > > > --- a/Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > > > pcm.yaml
> > > > > > > +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > > > pcm.yaml
> > > > > > > @@ -54,6 +54,11 @@ properties:
> > > > > > >          - const: aud_infra_clk
> > > > > > >          - const: aud_infra_26m_clk
> > > > > > > +patternProperties:
> > > > > > > +  "^i2s[0-35-9]-share$":
> > > > > > > +    description: Name of the I2S bus that is shared with
> > > > > > > this bus
> > > > > > > +    pattern: "^I2S[0-35-9]$"
> > > > > > > +
> > > > > > >    required:
> > > > > > >      - compatible
> > > > > > >      - interrupts
> > > > > > > 
> > > > > > 
> > > > > > The only other way of doing this would be to complicate
> > > > > > this in
> > > > > > the
> > > > > > driver
> > > > > > so that we can do something like
> > > > > > 
> > > > > > "i2s-share = <0 2>";  instead of  i2s0-share = "I2S2";
> > > > > > 
> > > > > > ...and I don't think that this would be any more
> > > > > > straightforward than
> > > > > > the
> > > > > > provided way.
> > > > > > 
> > > > > > There's an improvement that we can do to that pattern
> > > > > > description
> > > > > > though,
> > > > > > which would be explaining that declaring 'i2s0-share =
> > > > > > "I2S2"'
> > > > > > means
> > > > > > that
> > > > > > I2S2's data pin will be used as DATA-OUT, while i2s0 is
> > > > > > DATA-
> > > > > > IN.
> > > > > > 
> > > > > > Another thing that comes to mind here is that this is a
> > > > > > MediaTek
> > > > > > specific
> > > > > > property and *not* a generic one, which means that both the
> > > > > > driver
> > > > > > and
> > > > > > this binding should be fixed to get a "mediatek," prefix,
> > > > > > so,
> > > > > > this
> > > > > > property
> > > > > > should - in reality - be "mediatek,i2s[0-35-9]-share"
> > > > > > instead.
> > > > > > 
> > > > > > I think that everyone agrees about that, but let's see what
> > > > > > the
> > > > > > others say.
> > > > > > 
> > > > > > Cheers,
> > > > > > Angelo
> > > > > 
> > > > > Hi Angelo,
> > > > > 
> > > > > 'i2s0-share = "I2S2"' means that if we want use I2S0, there
> > > > > need
> > > > > open
> > > > > I2S2 to provide clock. Conversely, if we want to use I2S2, we
> > > > > don't
> > > > > need to open I2S0. However, MediaTek I2S0 and I2S2 hardware
> > > > > are
> > > > > generally designed as input. So usually we use 'i2s0-share =
> > > > > "I2S1"'.
> > > > > Even numbers represent input, odd numbers represent output.
> > > > > 
> > > > > Yes, I think adding the "mediatek," prefix is the right way
> > > > > to
> > > > > define a
> > > > > non-generic property.
> > > > > 
> > > 
> > > Hi Jiaxin,
> > > 
> > > thank you for the insights.
> > > 
> > > > 
> > > > Hello Jiaxin,
> > > > 
> > > > if I get this correctly, i2s0-share = "I2S2" would be
> > > > *invalid*...
> > > > as you
> > > > just explained, i2sX, where:
> > > > 
> > > > X = even number -> always DATA IN
> > > > X = odd number  -> always DATA OUT
> > > > 
> > > > ...this means that the dt-binding needs a pattern to specify
> > > > that
> > > > only odd
> > > > can be assigned to only even.
> > > 
> > > So, the situation seems different at least on mt8192-asurada-
> > > spherion.
> > > Here, I2S8 is used for the headset microphone and I2S9 for the
> > > headset audio.
> > > Even for input and odd for output agree with Jiaxin's
> > > description.
> > > However, the
> > > input bus seems to be the main one, that is, disabling I2S8:
> > > 
> > > 	amixer cset name='UL2_CH1 I2S8_CH1' 0
> > > 	amixer cset name='UL2_CH2 I2S8_CH2' 0
> > > 
> > > not only disables the microphone but also the audio on the
> > > headset.
> > > If I add 
> > > 
> > > 	i2s9-share = "I2S8";
> > > 
> > > on the DT, then everything works, I can disable I2S8 without
> > > impacting the
> > > headset audio. So the pattern for the property on this platform
> > > is
> > > the opposite
> > > that Jiaxin mentioned. This tells me that we should keep the
> > > binding
> > > more
> > > generic (not assume where odds and evens go). I will still apply
> > > the
> > > other
> > > suggestions mentioned though.
> > > 
> > > Thanks,
> > > Nícolas
> > > 
> > 
> > Hi Nícolas,
> > 
> > From software point, I2S8 and I2S9 belong to different hardware, so
> > if
> > you turn off I2S8 with CMD1, of course it will not affect I2S9.
> > 
> > CMD1:
> > amixer cset name='UL2_CH1 I2S8_CH1' 0
> > amixer cset name='UL2_CH2 I2S8_CH2' 0
> > 
> > Frome hardware point, I2S9 will use(share) I2S8's clock. If we
> > don't
> > want the user to perceive this, the driver need to help do
> > something.
> > So this property 'i2s9-share = "I2S8";' will be added to inform the
> > driver.
> 
> Hi Jiaxin,
> 
> yes, that's what I figured. What I was saying is that for the
> binding, your
> example was
> 
> i2s0-share = "I2S1"
>    ^ even,input  ^ odd,output
> 
> while on mt8192-asurada-spherion the use case is
> 
> i2s9-share = "I2S8";
>    ^ odd,output  ^ even,input
> 
> So Angelo's idea to require in the dt-binding that the left side is
> always even
> (input) and the right side always odd (based on your example),
> wouldn't work for
> my use case.
> 
> Basically it's a question of whether the input always shares the
> clock from an
> output (your example), or if output always shares the clock from an
> input (my
> use case), or if both are valid. I'm taking from this that both are
> valid, so I
> won't add any such restriction in the dt-binding in the following
> version, but
> do let me know if this is not the case.
> 
> Thanks,
> Nícolas

Hi Nícolas,

Yes, you are right. They completely depend on which set of I2S clock
are used on the platform hardware.

 i2s9-share = "I2S8"
 ==> The I2S8 and the I2S9 combine into one set of standard I2S, and
use I2S8's clock.

 i2s8-share = "I2S9"
 ==> The I2S8 and the I2S9 combine into one set of standard I2S, and
use I2S9's clock.

Best Regards,
Jiaxin Yu

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[Jiaxin Yu]

On Fri, 2022-05-06 at 10:09 -0400, Nícolas F. R. A. Prado wrote:
> On Fri, May 06, 2022 at 01:45:24PM +0800, Jiaxin Yu wrote:
> > On Thu, 2022-05-05 at 12:25 -0400, Nícolas F. R. A. Prado wrote:
> > > > 
> > > On Thu, May 05, 2022 at 10:52:45AM +0200, AngeloGioacchino Del
> > > Regno
> > > wrote:
> > > > Il 05/05/22 10:48, Jiaxin Yu ha scritto:
> > > > > On Thu, 2022-05-05 at 10:08 +0200, AngeloGioacchino Del Regno
> > > > > wrote:
> > > > > > Il 29/04/22 22:30, Nícolas F. R. A. Prado ha scritto:
> > > > > > > The Mediatek AFE PCM controller for MT8192 allows sharing
> > > > > > > of
> > > > > > > an I2S
> > > > > > > bus
> > > > > > > between two busses. Add a pattern for these properties in
> > > > > > > the
> > > > > > > dt-binding.
> > > > > > > 
> > > > > > > Signed-off-by: Nícolas F. R. A. Prado <
> > > > > > > nfraprado@collabora.com>
> > > > > > > ---
> > > > > > > 
> > > > > > >    Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > > > pcm.yaml | 5
> > > > > > > +++++
> > > > > > >    1 file changed, 5 insertions(+)
> > > > > > > 
> > > > > > > diff --git
> > > > > > > a/Documentation/devicetree/bindings/sound/mt8192-
> > > > > > > afe-
> > > > > > > pcm.yaml
> > > > > > > b/Documentation/devicetree/bindings/sound/mt8192-
> > > > > > > afe-
> > > > > > > pcm.yaml
> > > > > > > index 7a25bc9b8060..5b03c8dbf318 100644
> > > > > > > --- a/Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > > > pcm.yaml
> > > > > > > +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > > > pcm.yaml
> > > > > > > @@ -54,6 +54,11 @@ properties:
> > > > > > >          - const: aud_infra_clk
> > > > > > >          - const: aud_infra_26m_clk
> > > > > > > +patternProperties:
> > > > > > > +  "^i2s[0-35-9]-share$":
> > > > > > > +    description: Name of the I2S bus that is shared with
> > > > > > > this bus
> > > > > > > +    pattern: "^I2S[0-35-9]$"
> > > > > > > +
> > > > > > >    required:
> > > > > > >      - compatible
> > > > > > >      - interrupts
> > > > > > > 
> > > > > > 
> > > > > > The only other way of doing this would be to complicate
> > > > > > this in
> > > > > > the
> > > > > > driver
> > > > > > so that we can do something like
> > > > > > 
> > > > > > "i2s-share = <0 2>";  instead of  i2s0-share = "I2S2";
> > > > > > 
> > > > > > ...and I don't think that this would be any more
> > > > > > straightforward than
> > > > > > the
> > > > > > provided way.
> > > > > > 
> > > > > > There's an improvement that we can do to that pattern
> > > > > > description
> > > > > > though,
> > > > > > which would be explaining that declaring 'i2s0-share =
> > > > > > "I2S2"'
> > > > > > means
> > > > > > that
> > > > > > I2S2's data pin will be used as DATA-OUT, while i2s0 is
> > > > > > DATA-
> > > > > > IN.
> > > > > > 
> > > > > > Another thing that comes to mind here is that this is a
> > > > > > MediaTek
> > > > > > specific
> > > > > > property and *not* a generic one, which means that both the
> > > > > > driver
> > > > > > and
> > > > > > this binding should be fixed to get a "mediatek," prefix,
> > > > > > so,
> > > > > > this
> > > > > > property
> > > > > > should - in reality - be "mediatek,i2s[0-35-9]-share"
> > > > > > instead.
> > > > > > 
> > > > > > I think that everyone agrees about that, but let's see what
> > > > > > the
> > > > > > others say.
> > > > > > 
> > > > > > Cheers,
> > > > > > Angelo
> > > > > 
> > > > > Hi Angelo,
> > > > > 
> > > > > 'i2s0-share = "I2S2"' means that if we want use I2S0, there
> > > > > need
> > > > > open
> > > > > I2S2 to provide clock. Conversely, if we want to use I2S2, we
> > > > > don't
> > > > > need to open I2S0. However, MediaTek I2S0 and I2S2 hardware
> > > > > are
> > > > > generally designed as input. So usually we use 'i2s0-share =
> > > > > "I2S1"'.
> > > > > Even numbers represent input, odd numbers represent output.
> > > > > 
> > > > > Yes, I think adding the "mediatek," prefix is the right way
> > > > > to
> > > > > define a
> > > > > non-generic property.
> > > > > 
> > > 
> > > Hi Jiaxin,
> > > 
> > > thank you for the insights.
> > > 
> > > > 
> > > > Hello Jiaxin,
> > > > 
> > > > if I get this correctly, i2s0-share = "I2S2" would be
> > > > *invalid*...
> > > > as you
> > > > just explained, i2sX, where:
> > > > 
> > > > X = even number -> always DATA IN
> > > > X = odd number  -> always DATA OUT
> > > > 
> > > > ...this means that the dt-binding needs a pattern to specify
> > > > that
> > > > only odd
> > > > can be assigned to only even.
> > > 
> > > So, the situation seems different at least on mt8192-asurada-
> > > spherion.
> > > Here, I2S8 is used for the headset microphone and I2S9 for the
> > > headset audio.
> > > Even for input and odd for output agree with Jiaxin's
> > > description.
> > > However, the
> > > input bus seems to be the main one, that is, disabling I2S8:
> > > 
> > > 	amixer cset name='UL2_CH1 I2S8_CH1' 0
> > > 	amixer cset name='UL2_CH2 I2S8_CH2' 0
> > > 
> > > not only disables the microphone but also the audio on the
> > > headset.
> > > If I add 
> > > 
> > > 	i2s9-share = "I2S8";
> > > 
> > > on the DT, then everything works, I can disable I2S8 without
> > > impacting the
> > > headset audio. So the pattern for the property on this platform
> > > is
> > > the opposite
> > > that Jiaxin mentioned. This tells me that we should keep the
> > > binding
> > > more
> > > generic (not assume where odds and evens go). I will still apply
> > > the
> > > other
> > > suggestions mentioned though.
> > > 
> > > Thanks,
> > > Nícolas
> > > 
> > 
> > Hi Nícolas,
> > 
> > From software point, I2S8 and I2S9 belong to different hardware, so
> > if
> > you turn off I2S8 with CMD1, of course it will not affect I2S9.
> > 
> > CMD1:
> > amixer cset name='UL2_CH1 I2S8_CH1' 0
> > amixer cset name='UL2_CH2 I2S8_CH2' 0
> > 
> > Frome hardware point, I2S9 will use(share) I2S8's clock. If we
> > don't
> > want the user to perceive this, the driver need to help do
> > something.
> > So this property 'i2s9-share = "I2S8";' will be added to inform the
> > driver.
> 
> Hi Jiaxin,
> 
> yes, that's what I figured. What I was saying is that for the
> binding, your
> example was
> 
> i2s0-share = "I2S1"
>    ^ even,input  ^ odd,output
> 
> while on mt8192-asurada-spherion the use case is
> 
> i2s9-share = "I2S8";
>    ^ odd,output  ^ even,input
> 
> So Angelo's idea to require in the dt-binding that the left side is
> always even
> (input) and the right side always odd (based on your example),
> wouldn't work for
> my use case.
> 
> Basically it's a question of whether the input always shares the
> clock from an
> output (your example), or if output always shares the clock from an
> input (my
> use case), or if both are valid. I'm taking from this that both are
> valid, so I
> won't add any such restriction in the dt-binding in the following
> version, but
> do let me know if this is not the case.
> 
> Thanks,
> Nícolas

Hi Nícolas,

Yes, you are right. They completely depend on which set of I2S clock
are used on the platform hardware.

 i2s9-share = "I2S8"
 ==> The I2S8 and the I2S9 combine into one set of standard I2S, and
use I2S8's clock.

 i2s8-share = "I2S9"
 ==> The I2S8 and the I2S9 combine into one set of standard I2S, and
use I2S9's clock.

Best Regards,
Jiaxin Yu

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[Jiaxin Yu]

On Fri, 2022-05-06 at 10:09 -0400, Nícolas F. R. A. Prado wrote:
> On Fri, May 06, 2022 at 01:45:24PM +0800, Jiaxin Yu wrote:
> > On Thu, 2022-05-05 at 12:25 -0400, Nícolas F. R. A. Prado wrote:
> > > > 
> > > On Thu, May 05, 2022 at 10:52:45AM +0200, AngeloGioacchino Del
> > > Regno
> > > wrote:
> > > > Il 05/05/22 10:48, Jiaxin Yu ha scritto:
> > > > > On Thu, 2022-05-05 at 10:08 +0200, AngeloGioacchino Del Regno
> > > > > wrote:
> > > > > > Il 29/04/22 22:30, Nícolas F. R. A. Prado ha scritto:
> > > > > > > The Mediatek AFE PCM controller for MT8192 allows sharing
> > > > > > > of
> > > > > > > an I2S
> > > > > > > bus
> > > > > > > between two busses. Add a pattern for these properties in
> > > > > > > the
> > > > > > > dt-binding.
> > > > > > > 
> > > > > > > Signed-off-by: Nícolas F. R. A. Prado <
> > > > > > > nfraprado@collabora.com>
> > > > > > > ---
> > > > > > > 
> > > > > > >    Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > > > pcm.yaml | 5
> > > > > > > +++++
> > > > > > >    1 file changed, 5 insertions(+)
> > > > > > > 
> > > > > > > diff --git
> > > > > > > a/Documentation/devicetree/bindings/sound/mt8192-
> > > > > > > afe-
> > > > > > > pcm.yaml
> > > > > > > b/Documentation/devicetree/bindings/sound/mt8192-
> > > > > > > afe-
> > > > > > > pcm.yaml
> > > > > > > index 7a25bc9b8060..5b03c8dbf318 100644
> > > > > > > --- a/Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > > > pcm.yaml
> > > > > > > +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > > > pcm.yaml
> > > > > > > @@ -54,6 +54,11 @@ properties:
> > > > > > >          - const: aud_infra_clk
> > > > > > >          - const: aud_infra_26m_clk
> > > > > > > +patternProperties:
> > > > > > > +  "^i2s[0-35-9]-share$":
> > > > > > > +    description: Name of the I2S bus that is shared with
> > > > > > > this bus
> > > > > > > +    pattern: "^I2S[0-35-9]$"
> > > > > > > +
> > > > > > >    required:
> > > > > > >      - compatible
> > > > > > >      - interrupts
> > > > > > > 
> > > > > > 
> > > > > > The only other way of doing this would be to complicate
> > > > > > this in
> > > > > > the
> > > > > > driver
> > > > > > so that we can do something like
> > > > > > 
> > > > > > "i2s-share = <0 2>";  instead of  i2s0-share = "I2S2";
> > > > > > 
> > > > > > ...and I don't think that this would be any more
> > > > > > straightforward than
> > > > > > the
> > > > > > provided way.
> > > > > > 
> > > > > > There's an improvement that we can do to that pattern
> > > > > > description
> > > > > > though,
> > > > > > which would be explaining that declaring 'i2s0-share =
> > > > > > "I2S2"'
> > > > > > means
> > > > > > that
> > > > > > I2S2's data pin will be used as DATA-OUT, while i2s0 is
> > > > > > DATA-
> > > > > > IN.
> > > > > > 
> > > > > > Another thing that comes to mind here is that this is a
> > > > > > MediaTek
> > > > > > specific
> > > > > > property and *not* a generic one, which means that both the
> > > > > > driver
> > > > > > and
> > > > > > this binding should be fixed to get a "mediatek," prefix,
> > > > > > so,
> > > > > > this
> > > > > > property
> > > > > > should - in reality - be "mediatek,i2s[0-35-9]-share"
> > > > > > instead.
> > > > > > 
> > > > > > I think that everyone agrees about that, but let's see what
> > > > > > the
> > > > > > others say.
> > > > > > 
> > > > > > Cheers,
> > > > > > Angelo
> > > > > 
> > > > > Hi Angelo,
> > > > > 
> > > > > 'i2s0-share = "I2S2"' means that if we want use I2S0, there
> > > > > need
> > > > > open
> > > > > I2S2 to provide clock. Conversely, if we want to use I2S2, we
> > > > > don't
> > > > > need to open I2S0. However, MediaTek I2S0 and I2S2 hardware
> > > > > are
> > > > > generally designed as input. So usually we use 'i2s0-share =
> > > > > "I2S1"'.
> > > > > Even numbers represent input, odd numbers represent output.
> > > > > 
> > > > > Yes, I think adding the "mediatek," prefix is the right way
> > > > > to
> > > > > define a
> > > > > non-generic property.
> > > > > 
> > > 
> > > Hi Jiaxin,
> > > 
> > > thank you for the insights.
> > > 
> > > > 
> > > > Hello Jiaxin,
> > > > 
> > > > if I get this correctly, i2s0-share = "I2S2" would be
> > > > *invalid*...
> > > > as you
> > > > just explained, i2sX, where:
> > > > 
> > > > X = even number -> always DATA IN
> > > > X = odd number  -> always DATA OUT
> > > > 
> > > > ...this means that the dt-binding needs a pattern to specify
> > > > that
> > > > only odd
> > > > can be assigned to only even.
> > > 
> > > So, the situation seems different at least on mt8192-asurada-
> > > spherion.
> > > Here, I2S8 is used for the headset microphone and I2S9 for the
> > > headset audio.
> > > Even for input and odd for output agree with Jiaxin's
> > > description.
> > > However, the
> > > input bus seems to be the main one, that is, disabling I2S8:
> > > 
> > > 	amixer cset name='UL2_CH1 I2S8_CH1' 0
> > > 	amixer cset name='UL2_CH2 I2S8_CH2' 0
> > > 
> > > not only disables the microphone but also the audio on the
> > > headset.
> > > If I add 
> > > 
> > > 	i2s9-share = "I2S8";
> > > 
> > > on the DT, then everything works, I can disable I2S8 without
> > > impacting the
> > > headset audio. So the pattern for the property on this platform
> > > is
> > > the opposite
> > > that Jiaxin mentioned. This tells me that we should keep the
> > > binding
> > > more
> > > generic (not assume where odds and evens go). I will still apply
> > > the
> > > other
> > > suggestions mentioned though.
> > > 
> > > Thanks,
> > > Nícolas
> > > 
> > 
> > Hi Nícolas,
> > 
> > From software point, I2S8 and I2S9 belong to different hardware, so
> > if
> > you turn off I2S8 with CMD1, of course it will not affect I2S9.
> > 
> > CMD1:
> > amixer cset name='UL2_CH1 I2S8_CH1' 0
> > amixer cset name='UL2_CH2 I2S8_CH2' 0
> > 
> > Frome hardware point, I2S9 will use(share) I2S8's clock. If we
> > don't
> > want the user to perceive this, the driver need to help do
> > something.
> > So this property 'i2s9-share = "I2S8";' will be added to inform the
> > driver.
> 
> Hi Jiaxin,
> 
> yes, that's what I figured. What I was saying is that for the
> binding, your
> example was
> 
> i2s0-share = "I2S1"
>    ^ even,input  ^ odd,output
> 
> while on mt8192-asurada-spherion the use case is
> 
> i2s9-share = "I2S8";
>    ^ odd,output  ^ even,input
> 
> So Angelo's idea to require in the dt-binding that the left side is
> always even
> (input) and the right side always odd (based on your example),
> wouldn't work for
> my use case.
> 
> Basically it's a question of whether the input always shares the
> clock from an
> output (your example), or if output always shares the clock from an
> input (my
> use case), or if both are valid. I'm taking from this that both are
> valid, so I
> won't add any such restriction in the dt-binding in the following
> version, but
> do let me know if this is not the case.
> 
> Thanks,
> Nícolas

Hi Nícolas,

Yes, you are right. They completely depend on which set of I2S clock
are used on the platform hardware.

 i2s9-share = "I2S8"
 ==> The I2S8 and the I2S9 combine into one set of standard I2S, and
use I2S8's clock.

 i2s8-share = "I2S9"
 ==> The I2S8 and the I2S9 combine into one set of standard I2S, and
use I2S9's clock.

Best Regards,
Jiaxin Yu
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH 1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[Jiaxin Yu]

On Fri, 2022-05-06 at 10:09 -0400, Nícolas F. R. A. Prado wrote:
> On Fri, May 06, 2022 at 01:45:24PM +0800, Jiaxin Yu wrote:
> > On Thu, 2022-05-05 at 12:25 -0400, Nícolas F. R. A. Prado wrote:
> > > > 
> > > On Thu, May 05, 2022 at 10:52:45AM +0200, AngeloGioacchino Del
> > > Regno
> > > wrote:
> > > > Il 05/05/22 10:48, Jiaxin Yu ha scritto:
> > > > > On Thu, 2022-05-05 at 10:08 +0200, AngeloGioacchino Del Regno
> > > > > wrote:
> > > > > > Il 29/04/22 22:30, Nícolas F. R. A. Prado ha scritto:
> > > > > > > The Mediatek AFE PCM controller for MT8192 allows sharing
> > > > > > > of
> > > > > > > an I2S
> > > > > > > bus
> > > > > > > between two busses. Add a pattern for these properties in
> > > > > > > the
> > > > > > > dt-binding.
> > > > > > > 
> > > > > > > Signed-off-by: Nícolas F. R. A. Prado <
> > > > > > > nfraprado@collabora.com>
> > > > > > > ---
> > > > > > > 
> > > > > > >    Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > > > pcm.yaml | 5
> > > > > > > +++++
> > > > > > >    1 file changed, 5 insertions(+)
> > > > > > > 
> > > > > > > diff --git
> > > > > > > a/Documentation/devicetree/bindings/sound/mt8192-
> > > > > > > afe-
> > > > > > > pcm.yaml
> > > > > > > b/Documentation/devicetree/bindings/sound/mt8192-
> > > > > > > afe-
> > > > > > > pcm.yaml
> > > > > > > index 7a25bc9b8060..5b03c8dbf318 100644
> > > > > > > --- a/Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > > > pcm.yaml
> > > > > > > +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-
> > > > > > > pcm.yaml
> > > > > > > @@ -54,6 +54,11 @@ properties:
> > > > > > >          - const: aud_infra_clk
> > > > > > >          - const: aud_infra_26m_clk
> > > > > > > +patternProperties:
> > > > > > > +  "^i2s[0-35-9]-share$":
> > > > > > > +    description: Name of the I2S bus that is shared with
> > > > > > > this bus
> > > > > > > +    pattern: "^I2S[0-35-9]$"
> > > > > > > +
> > > > > > >    required:
> > > > > > >      - compatible
> > > > > > >      - interrupts
> > > > > > > 
> > > > > > 
> > > > > > The only other way of doing this would be to complicate
> > > > > > this in
> > > > > > the
> > > > > > driver
> > > > > > so that we can do something like
> > > > > > 
> > > > > > "i2s-share = <0 2>";  instead of  i2s0-share = "I2S2";
> > > > > > 
> > > > > > ...and I don't think that this would be any more
> > > > > > straightforward than
> > > > > > the
> > > > > > provided way.
> > > > > > 
> > > > > > There's an improvement that we can do to that pattern
> > > > > > description
> > > > > > though,
> > > > > > which would be explaining that declaring 'i2s0-share =
> > > > > > "I2S2"'
> > > > > > means
> > > > > > that
> > > > > > I2S2's data pin will be used as DATA-OUT, while i2s0 is
> > > > > > DATA-
> > > > > > IN.
> > > > > > 
> > > > > > Another thing that comes to mind here is that this is a
> > > > > > MediaTek
> > > > > > specific
> > > > > > property and *not* a generic one, which means that both the
> > > > > > driver
> > > > > > and
> > > > > > this binding should be fixed to get a "mediatek," prefix,
> > > > > > so,
> > > > > > this
> > > > > > property
> > > > > > should - in reality - be "mediatek,i2s[0-35-9]-share"
> > > > > > instead.
> > > > > > 
> > > > > > I think that everyone agrees about that, but let's see what
> > > > > > the
> > > > > > others say.
> > > > > > 
> > > > > > Cheers,
> > > > > > Angelo
> > > > > 
> > > > > Hi Angelo,
> > > > > 
> > > > > 'i2s0-share = "I2S2"' means that if we want use I2S0, there
> > > > > need
> > > > > open
> > > > > I2S2 to provide clock. Conversely, if we want to use I2S2, we
> > > > > don't
> > > > > need to open I2S0. However, MediaTek I2S0 and I2S2 hardware
> > > > > are
> > > > > generally designed as input. So usually we use 'i2s0-share =
> > > > > "I2S1"'.
> > > > > Even numbers represent input, odd numbers represent output.
> > > > > 
> > > > > Yes, I think adding the "mediatek," prefix is the right way
> > > > > to
> > > > > define a
> > > > > non-generic property.
> > > > > 
> > > 
> > > Hi Jiaxin,
> > > 
> > > thank you for the insights.
> > > 
> > > > 
> > > > Hello Jiaxin,
> > > > 
> > > > if I get this correctly, i2s0-share = "I2S2" would be
> > > > *invalid*...
> > > > as you
> > > > just explained, i2sX, where:
> > > > 
> > > > X = even number -> always DATA IN
> > > > X = odd number  -> always DATA OUT
> > > > 
> > > > ...this means that the dt-binding needs a pattern to specify
> > > > that
> > > > only odd
> > > > can be assigned to only even.
> > > 
> > > So, the situation seems different at least on mt8192-asurada-
> > > spherion.
> > > Here, I2S8 is used for the headset microphone and I2S9 for the
> > > headset audio.
> > > Even for input and odd for output agree with Jiaxin's
> > > description.
> > > However, the
> > > input bus seems to be the main one, that is, disabling I2S8:
> > > 
> > > 	amixer cset name='UL2_CH1 I2S8_CH1' 0
> > > 	amixer cset name='UL2_CH2 I2S8_CH2' 0
> > > 
> > > not only disables the microphone but also the audio on the
> > > headset.
> > > If I add 
> > > 
> > > 	i2s9-share = "I2S8";
> > > 
> > > on the DT, then everything works, I can disable I2S8 without
> > > impacting the
> > > headset audio. So the pattern for the property on this platform
> > > is
> > > the opposite
> > > that Jiaxin mentioned. This tells me that we should keep the
> > > binding
> > > more
> > > generic (not assume where odds and evens go). I will still apply
> > > the
> > > other
> > > suggestions mentioned though.
> > > 
> > > Thanks,
> > > Nícolas
> > > 
> > 
> > Hi Nícolas,
> > 
> > From software point, I2S8 and I2S9 belong to different hardware, so
> > if
> > you turn off I2S8 with CMD1, of course it will not affect I2S9.
> > 
> > CMD1:
> > amixer cset name='UL2_CH1 I2S8_CH1' 0
> > amixer cset name='UL2_CH2 I2S8_CH2' 0
> > 
> > Frome hardware point, I2S9 will use(share) I2S8's clock. If we
> > don't
> > want the user to perceive this, the driver need to help do
> > something.
> > So this property 'i2s9-share = "I2S8";' will be added to inform the
> > driver.
> 
> Hi Jiaxin,
> 
> yes, that's what I figured. What I was saying is that for the
> binding, your
> example was
> 
> i2s0-share = "I2S1"
>    ^ even,input  ^ odd,output
> 
> while on mt8192-asurada-spherion the use case is
> 
> i2s9-share = "I2S8";
>    ^ odd,output  ^ even,input
> 
> So Angelo's idea to require in the dt-binding that the left side is
> always even
> (input) and the right side always odd (based on your example),
> wouldn't work for
> my use case.
> 
> Basically it's a question of whether the input always shares the
> clock from an
> output (your example), or if output always shares the clock from an
> input (my
> use case), or if both are valid. I'm taking from this that both are
> valid, so I
> won't add any such restriction in the dt-binding in the following
> version, but
> do let me know if this is not the case.
> 
> Thanks,
> Nícolas

Hi Nícolas,

Yes, you are right. They completely depend on which set of I2S clock
are used on the platform hardware.

 i2s9-share = "I2S8"
 ==> The I2S8 and the I2S9 combine into one set of standard I2S, and
use I2S8's clock.

 i2s8-share = "I2S9"
 ==> The I2S8 and the I2S9 combine into one set of standard I2S, and
use I2S9's clock.

Best Regards,
Jiaxin Yu
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 0/3] Add missing dt-binding properties for audio components on mt8192-asurada

[Mark Brown]

On Fri, 29 Apr 2022 16:30:36 -0400, Nícolas F. R. A. Prado wrote:
> These patches add properties that were missing on the dt-bindings of the
> audio components used by mt8192-asurada. Namely the i2s-share
> properties for the sound platform and the #sound-dai-cells on the
> rt1015p and rt5682 codecs when they're referenced by the machine sound
> node.
> 
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties
      commit: e056cf4341ae3f856f1e38da02b27cb04de4c69b
[2/3] ASoC: dt-bindings: rt1015p: Add #sound-dai-cells
      commit: 2f45536587e53a7a22024e12fbe97ef13598e623
[3/3] ASoC: dt-bindings: rt5682: Add #sound-dai-cells
      commit: 0adccaf1eac91a2c2ee6a54a6de042affe9860f4

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Re: [PATCH 0/3] Add missing dt-binding properties for audio components on mt8192-asurada

[Mark Brown]

On Fri, 29 Apr 2022 16:30:36 -0400, Nícolas F. R. A. Prado wrote:
> These patches add properties that were missing on the dt-bindings of the
> audio components used by mt8192-asurada. Namely the i2s-share
> properties for the sound platform and the #sound-dai-cells on the
> rt1015p and rt5682 codecs when they're referenced by the machine sound
> node.
> 
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties
      commit: e056cf4341ae3f856f1e38da02b27cb04de4c69b
[2/3] ASoC: dt-bindings: rt1015p: Add #sound-dai-cells
      commit: 2f45536587e53a7a22024e12fbe97ef13598e623
[3/3] ASoC: dt-bindings: rt5682: Add #sound-dai-cells
      commit: 0adccaf1eac91a2c2ee6a54a6de042affe9860f4

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH 0/3] Add missing dt-binding properties for audio components on mt8192-asurada

[Mark Brown]

On Fri, 29 Apr 2022 16:30:36 -0400, Nícolas F. R. A. Prado wrote:
> These patches add properties that were missing on the dt-bindings of the
> audio components used by mt8192-asurada. Namely the i2s-share
> properties for the sound platform and the #sound-dai-cells on the
> rt1015p and rt5682 codecs when they're referenced by the machine sound
> node.
> 
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties
      commit: e056cf4341ae3f856f1e38da02b27cb04de4c69b
[2/3] ASoC: dt-bindings: rt1015p: Add #sound-dai-cells
      commit: 2f45536587e53a7a22024e12fbe97ef13598e623
[3/3] ASoC: dt-bindings: rt5682: Add #sound-dai-cells
      commit: 0adccaf1eac91a2c2ee6a54a6de042affe9860f4

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

Re: [PATCH 0/3] Add missing dt-binding properties for audio components on mt8192-asurada

[Mark Brown]

On Fri, 29 Apr 2022 16:30:36 -0400, Nícolas F. R. A. Prado wrote:
> These patches add properties that were missing on the dt-bindings of the
> audio components used by mt8192-asurada. Namely the i2s-share
> properties for the sound platform and the #sound-dai-cells on the
> rt1015p and rt5682 codecs when they're referenced by the machine sound
> node.
> 
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties
      commit: e056cf4341ae3f856f1e38da02b27cb04de4c69b
[2/3] ASoC: dt-bindings: rt1015p: Add #sound-dai-cells
      commit: 2f45536587e53a7a22024e12fbe97ef13598e623
[3/3] ASoC: dt-bindings: rt5682: Add #sound-dai-cells
      commit: 0adccaf1eac91a2c2ee6a54a6de042affe9860f4

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 0/3] Add missing dt-binding properties for audio components on mt8192-asurada

[Nícolas F. R. A. Prado]

On Mon, May 09, 2022 at 06:17:41PM +0100, Mark Brown wrote:
> On Fri, 29 Apr 2022 16:30:36 -0400, Nícolas F. R. A. Prado wrote:
> > These patches add properties that were missing on the dt-bindings of the
> > audio components used by mt8192-asurada. Namely the i2s-share
> > properties for the sound platform and the #sound-dai-cells on the
> > rt1015p and rt5682 codecs when they're referenced by the machine sound
> > node.
> > 
> > 
> > [...]
> 
> Applied to
> 
>    https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
> 
> Thanks!
> 
> [1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties
>       commit: e056cf4341ae3f856f1e38da02b27cb04de4c69b
> [2/3] ASoC: dt-bindings: rt1015p: Add #sound-dai-cells
>       commit: 2f45536587e53a7a22024e12fbe97ef13598e623
> [3/3] ASoC: dt-bindings: rt5682: Add #sound-dai-cells
>       commit: 0adccaf1eac91a2c2ee6a54a6de042affe9860f4

Hi Mark,

this series wasn't supposed to be merged yet, I'm in the process of preparing
and sending a v2. Well, for patch 1 at least, which needs some improvements
still. Patches 2 and 3 weren't going to be changed, so those would be fine to
keep merged if you want. 

Thanks,
Nícolas

Re: [PATCH 0/3] Add missing dt-binding properties for audio components on mt8192-asurada

[Nícolas F. R. A. Prado]

On Mon, May 09, 2022 at 06:17:41PM +0100, Mark Brown wrote:
> On Fri, 29 Apr 2022 16:30:36 -0400, Nícolas F. R. A. Prado wrote:
> > These patches add properties that were missing on the dt-bindings of the
> > audio components used by mt8192-asurada. Namely the i2s-share
> > properties for the sound platform and the #sound-dai-cells on the
> > rt1015p and rt5682 codecs when they're referenced by the machine sound
> > node.
> > 
> > 
> > [...]
> 
> Applied to
> 
>    https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
> 
> Thanks!
> 
> [1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties
>       commit: e056cf4341ae3f856f1e38da02b27cb04de4c69b
> [2/3] ASoC: dt-bindings: rt1015p: Add #sound-dai-cells
>       commit: 2f45536587e53a7a22024e12fbe97ef13598e623
> [3/3] ASoC: dt-bindings: rt5682: Add #sound-dai-cells
>       commit: 0adccaf1eac91a2c2ee6a54a6de042affe9860f4

Hi Mark,

this series wasn't supposed to be merged yet, I'm in the process of preparing
and sending a v2. Well, for patch 1 at least, which needs some improvements
still. Patches 2 and 3 weren't going to be changed, so those would be fine to
keep merged if you want. 

Thanks,
Nícolas

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH 0/3] Add missing dt-binding properties for audio components on mt8192-asurada

[Nícolas F. R. A. Prado]

On Mon, May 09, 2022 at 06:17:41PM +0100, Mark Brown wrote:
> On Fri, 29 Apr 2022 16:30:36 -0400, Nícolas F. R. A. Prado wrote:
> > These patches add properties that were missing on the dt-bindings of the
> > audio components used by mt8192-asurada. Namely the i2s-share
> > properties for the sound platform and the #sound-dai-cells on the
> > rt1015p and rt5682 codecs when they're referenced by the machine sound
> > node.
> > 
> > 
> > [...]
> 
> Applied to
> 
>    https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
> 
> Thanks!
> 
> [1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties
>       commit: e056cf4341ae3f856f1e38da02b27cb04de4c69b
> [2/3] ASoC: dt-bindings: rt1015p: Add #sound-dai-cells
>       commit: 2f45536587e53a7a22024e12fbe97ef13598e623
> [3/3] ASoC: dt-bindings: rt5682: Add #sound-dai-cells
>       commit: 0adccaf1eac91a2c2ee6a54a6de042affe9860f4

Hi Mark,

this series wasn't supposed to be merged yet, I'm in the process of preparing
and sending a v2. Well, for patch 1 at least, which needs some improvements
still. Patches 2 and 3 weren't going to be changed, so those would be fine to
keep merged if you want. 

Thanks,
Nícolas

Re: [PATCH 0/3] Add missing dt-binding properties for audio components on mt8192-asurada

[Nícolas F. R. A. Prado]

On Mon, May 09, 2022 at 06:17:41PM +0100, Mark Brown wrote:
> On Fri, 29 Apr 2022 16:30:36 -0400, Nícolas F. R. A. Prado wrote:
> > These patches add properties that were missing on the dt-bindings of the
> > audio components used by mt8192-asurada. Namely the i2s-share
> > properties for the sound platform and the #sound-dai-cells on the
> > rt1015p and rt5682 codecs when they're referenced by the machine sound
> > node.
> > 
> > 
> > [...]
> 
> Applied to
> 
>    https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
> 
> Thanks!
> 
> [1/3] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties
>       commit: e056cf4341ae3f856f1e38da02b27cb04de4c69b
> [2/3] ASoC: dt-bindings: rt1015p: Add #sound-dai-cells
>       commit: 2f45536587e53a7a22024e12fbe97ef13598e623
> [3/3] ASoC: dt-bindings: rt5682: Add #sound-dai-cells
>       commit: 0adccaf1eac91a2c2ee6a54a6de042affe9860f4

Hi Mark,

this series wasn't supposed to be merged yet, I'm in the process of preparing
and sending a v2. Well, for patch 1 at least, which needs some improvements
still. Patches 2 and 3 weren't going to be changed, so those would be fine to
keep merged if you want. 

Thanks,
Nícolas

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 0/3] Add missing dt-binding properties for audio components on mt8192-asurada

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 442 bytes --]

On Mon, May 09, 2022 at 02:16:29PM -0400, Nícolas F. R. A. Prado wrote:

> this series wasn't supposed to be merged yet, I'm in the process of preparing
> and sending a v2. Well, for patch 1 at least, which needs some improvements
> still. Patches 2 and 3 weren't going to be changed, so those would be fine to
> keep merged if you want. 

Please send a revert for the first patch with appropriate changelog if
you want it dropping.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 0/3] Add missing dt-binding properties for audio components on mt8192-asurada

[Mark Brown]

[-- Attachment #1.1: Type: text/plain, Size: 442 bytes --]

On Mon, May 09, 2022 at 02:16:29PM -0400, Nícolas F. R. A. Prado wrote:

> this series wasn't supposed to be merged yet, I'm in the process of preparing
> and sending a v2. Well, for patch 1 at least, which needs some improvements
> still. Patches 2 and 3 weren't going to be changed, so those would be fine to
> keep merged if you want. 

Please send a revert for the first patch with appropriate changelog if
you want it dropping.

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 170 bytes --]

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH 0/3] Add missing dt-binding properties for audio components on mt8192-asurada

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 442 bytes --]

On Mon, May 09, 2022 at 02:16:29PM -0400, Nícolas F. R. A. Prado wrote:

> this series wasn't supposed to be merged yet, I'm in the process of preparing
> and sending a v2. Well, for patch 1 at least, which needs some improvements
> still. Patches 2 and 3 weren't going to be changed, so those would be fine to
> keep merged if you want. 

Please send a revert for the first patch with appropriate changelog if
you want it dropping.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 0/3] Add missing dt-binding properties for audio components on mt8192-asurada

[Mark Brown]

[-- Attachment #1.1: Type: text/plain, Size: 442 bytes --]

On Mon, May 09, 2022 at 02:16:29PM -0400, Nícolas F. R. A. Prado wrote:

> this series wasn't supposed to be merged yet, I'm in the process of preparing
> and sending a v2. Well, for patch 1 at least, which needs some improvements
> still. Patches 2 and 3 weren't going to be changed, so those would be fine to
> keep merged if you want. 

Please send a revert for the first patch with appropriate changelog if
you want it dropping.

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel