All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Cédric Le Goater" <clg@kaod.org>
To: linux-spi@vger.kernel.org, linux-mtd@lists.infradead.org
Cc: "Mark Brown" <broonie@kernel.org>,
	"Tudor Ambarus" <tudor.ambarus@microchip.com>,
	"Pratyush Yadav" <p.yadav@ti.com>,
	"Miquel Raynal" <miquel.raynal@bootlin.com>,
	"Richard Weinberger" <richard@nod.at>,
	"Vignesh Raghavendra" <vigneshr@ti.com>,
	linux-aspeed@lists.ozlabs.org, "Joel Stanley" <joel@jms.id.au>,
	"Andrew Jeffery" <andrew@aj.id.au>,
	"Chin-Ting Kuo" <chin-ting_kuo@aspeedtech.com>,
	devicetree@vger.kernel.org, "Rob Herring" <robh+dt@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, "Cédric Le Goater" <clg@kaod.org>,
	"Tao Ren" <rentao.bupt@gmail.com>,
	"Jae Hyun Yoo" <quic_jaehyoo@quicinc.com>
Subject: [PATCH v6 09/11] ARM: dts: aspeed: Enable Dual SPI RX transfers
Date: Tue,  3 May 2022 08:06:32 +0200	[thread overview]
Message-ID: <20220503060634.122722-10-clg@kaod.org> (raw)
In-Reply-To: <20220503060634.122722-1-clg@kaod.org>

All these controllers support at least Dual SPI. Update the DTs.

Reviewed-by: Joel Stanley <joel@jms.id.au>
Tested-by: Joel Stanley <joel@jms.id.au>
Tested-by: Tao Ren <rentao.bupt@gmail.com>
Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
 arch/arm/boot/dts/aspeed-g4.dtsi | 6 ++++++
 arch/arm/boot/dts/aspeed-g5.dtsi | 7 +++++++
 arch/arm/boot/dts/aspeed-g6.dtsi | 8 ++++++++
 3 files changed, 21 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 3b7b98e787e7..1c6354cec9f2 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -64,27 +64,32 @@ fmc: spi@1e620000 {
 			flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
 				spi-max-frequency = <50000000>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@3 {
 				reg = < 3 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@4 {
 				reg = < 4 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -100,6 +105,7 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 1e727cbaab14..c89092c3905b 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -66,18 +66,21 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -93,12 +96,14 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -114,12 +119,14 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 6ae5dfecbdf1..4264fc0a7c3f 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -106,18 +106,21 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -133,12 +136,14 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -154,18 +159,21 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
-- 
2.35.1


WARNING: multiple messages have this Message-ID (diff)
From: "Cédric Le Goater" <clg@kaod.org>
To: linux-spi@vger.kernel.org, linux-mtd@lists.infradead.org
Cc: "Mark Brown" <broonie@kernel.org>,
	"Tudor Ambarus" <tudor.ambarus@microchip.com>,
	"Pratyush Yadav" <p.yadav@ti.com>,
	"Miquel Raynal" <miquel.raynal@bootlin.com>,
	"Richard Weinberger" <richard@nod.at>,
	"Vignesh Raghavendra" <vigneshr@ti.com>,
	linux-aspeed@lists.ozlabs.org, "Joel Stanley" <joel@jms.id.au>,
	"Andrew Jeffery" <andrew@aj.id.au>,
	"Chin-Ting Kuo" <chin-ting_kuo@aspeedtech.com>,
	devicetree@vger.kernel.org, "Rob Herring" <robh+dt@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, "Cédric Le Goater" <clg@kaod.org>,
	"Tao Ren" <rentao.bupt@gmail.com>,
	"Jae Hyun Yoo" <quic_jaehyoo@quicinc.com>
Subject: [PATCH v6 09/11] ARM: dts: aspeed: Enable Dual SPI RX transfers
Date: Tue,  3 May 2022 08:06:32 +0200	[thread overview]
Message-ID: <20220503060634.122722-10-clg@kaod.org> (raw)
In-Reply-To: <20220503060634.122722-1-clg@kaod.org>

All these controllers support at least Dual SPI. Update the DTs.

Reviewed-by: Joel Stanley <joel@jms.id.au>
Tested-by: Joel Stanley <joel@jms.id.au>
Tested-by: Tao Ren <rentao.bupt@gmail.com>
Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
 arch/arm/boot/dts/aspeed-g4.dtsi | 6 ++++++
 arch/arm/boot/dts/aspeed-g5.dtsi | 7 +++++++
 arch/arm/boot/dts/aspeed-g6.dtsi | 8 ++++++++
 3 files changed, 21 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 3b7b98e787e7..1c6354cec9f2 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -64,27 +64,32 @@ fmc: spi@1e620000 {
 			flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
 				spi-max-frequency = <50000000>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@3 {
 				reg = < 3 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@4 {
 				reg = < 4 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -100,6 +105,7 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 1e727cbaab14..c89092c3905b 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -66,18 +66,21 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -93,12 +96,14 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -114,12 +119,14 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 6ae5dfecbdf1..4264fc0a7c3f 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -106,18 +106,21 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -133,12 +136,14 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -154,18 +159,21 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
-- 
2.35.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

WARNING: multiple messages have this Message-ID (diff)
From: "Cédric Le Goater" <clg@kaod.org>
To: linux-spi@vger.kernel.org, linux-mtd@lists.infradead.org
Cc: "Mark Brown" <broonie@kernel.org>,
	"Tudor Ambarus" <tudor.ambarus@microchip.com>,
	"Pratyush Yadav" <p.yadav@ti.com>,
	"Miquel Raynal" <miquel.raynal@bootlin.com>,
	"Richard Weinberger" <richard@nod.at>,
	"Vignesh Raghavendra" <vigneshr@ti.com>,
	linux-aspeed@lists.ozlabs.org, "Joel Stanley" <joel@jms.id.au>,
	"Andrew Jeffery" <andrew@aj.id.au>,
	"Chin-Ting Kuo" <chin-ting_kuo@aspeedtech.com>,
	devicetree@vger.kernel.org, "Rob Herring" <robh+dt@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, "Cédric Le Goater" <clg@kaod.org>,
	"Tao Ren" <rentao.bupt@gmail.com>,
	"Jae Hyun Yoo" <quic_jaehyoo@quicinc.com>
Subject: [PATCH v6 09/11] ARM: dts: aspeed: Enable Dual SPI RX transfers
Date: Tue,  3 May 2022 08:06:32 +0200	[thread overview]
Message-ID: <20220503060634.122722-10-clg@kaod.org> (raw)
In-Reply-To: <20220503060634.122722-1-clg@kaod.org>

All these controllers support at least Dual SPI. Update the DTs.

Reviewed-by: Joel Stanley <joel@jms.id.au>
Tested-by: Joel Stanley <joel@jms.id.au>
Tested-by: Tao Ren <rentao.bupt@gmail.com>
Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
 arch/arm/boot/dts/aspeed-g4.dtsi | 6 ++++++
 arch/arm/boot/dts/aspeed-g5.dtsi | 7 +++++++
 arch/arm/boot/dts/aspeed-g6.dtsi | 8 ++++++++
 3 files changed, 21 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 3b7b98e787e7..1c6354cec9f2 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -64,27 +64,32 @@ fmc: spi@1e620000 {
 			flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
 				spi-max-frequency = <50000000>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@3 {
 				reg = < 3 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@4 {
 				reg = < 4 >;
 				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -100,6 +105,7 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 1e727cbaab14..c89092c3905b 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -66,18 +66,21 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -93,12 +96,14 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -114,12 +119,14 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 6ae5dfecbdf1..4264fc0a7c3f 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -106,18 +106,21 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -133,12 +136,14 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
@@ -154,18 +159,21 @@ flash@0 {
 				reg = < 0 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@1 {
 				reg = < 1 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 			flash@2 {
 				reg = < 2 >;
 				compatible = "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
 				status = "disabled";
 			};
 		};
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-05-03  6:08 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-03  6:06 [PATCH v6 00/11] spi: spi-mem: Convert Aspeed SMC driver to spi-mem Cédric Le Goater
2022-05-03  6:06 ` Cédric Le Goater
2022-05-03  6:06 ` Cédric Le Goater
2022-05-03  6:06 ` [PATCH v6 01/11] ARM: dts: aspeed: Adjust "reg" property of FMC/SPI controllers Cédric Le Goater
2022-05-03  6:06   ` Cédric Le Goater
2022-05-03  6:06   ` Cédric Le Goater
2022-05-03  6:06 ` [PATCH v6 02/11] dt-bindings: spi: Add Aspeed SMC controllers device tree binding Cédric Le Goater
2022-05-03  6:06   ` Cédric Le Goater
2022-05-03  6:06   ` Cédric Le Goater
2022-05-03  6:06 ` [PATCH v6 03/11] spi: spi-mem: Convert Aspeed SMC driver to spi-mem Cédric Le Goater
2022-05-03  6:06   ` Cédric Le Goater
2022-05-03  6:06   ` Cédric Le Goater
2022-05-03 17:55   ` Rob Herring
2022-05-03 17:55     ` Rob Herring
2022-05-03 17:55     ` Rob Herring
2022-05-08  7:14     ` Cédric Le Goater
2022-05-08  7:14       ` Cédric Le Goater
2022-05-08  7:14       ` Cédric Le Goater
2022-05-03  6:06 ` [PATCH v6 04/11] spi: aspeed: Add support for direct mapping Cédric Le Goater
2022-05-03  6:06   ` Cédric Le Goater
2022-05-03  6:06   ` Cédric Le Goater
2022-05-03  6:06 ` [PATCH v6 05/11] spi: aspeed: Adjust direct mapping to device size Cédric Le Goater
2022-05-03  6:06   ` Cédric Le Goater
2022-05-03  6:06   ` Cédric Le Goater
2022-05-03  6:06 ` [PATCH v6 06/11] spi: aspeed: Workaround AST2500 limitations Cédric Le Goater
2022-05-03  6:06   ` Cédric Le Goater
2022-05-03  6:06   ` Cédric Le Goater
2022-05-03  6:06 ` [PATCH v6 07/11] spi: aspeed: Add support for the AST2400 SPI controller Cédric Le Goater
2022-05-03  6:06   ` Cédric Le Goater
2022-05-03  6:06   ` Cédric Le Goater
2022-05-03  6:06 ` [PATCH v6 08/11] spi: aspeed: Calibrate read timings Cédric Le Goater
2022-05-03  6:06   ` Cédric Le Goater
2022-05-03  6:06   ` Cédric Le Goater
2022-05-03  6:06 ` Cédric Le Goater [this message]
2022-05-03  6:06   ` [PATCH v6 09/11] ARM: dts: aspeed: Enable Dual SPI RX transfers Cédric Le Goater
2022-05-03  6:06   ` Cédric Le Goater
2022-05-03  6:06 ` [PATCH v6 10/11] ARM: dts: aspeed-g4: Set spi-max-frequency for all flashes Cédric Le Goater
2022-05-03  6:06   ` Cédric Le Goater
2022-05-03  6:06   ` Cédric Le Goater
2022-05-03  6:06 ` [PATCH v6 11/11] mtd: spi-nor: aspeed: set the decoding size to at least 2MB for AST2600 Cédric Le Goater
2022-05-03  6:06   ` Cédric Le Goater
2022-05-03  6:06   ` Cédric Le Goater
2022-05-03  6:43 ` [PATCH v6 00/11] spi: spi-mem: Convert Aspeed SMC driver to spi-mem Joel Stanley
2022-05-03  7:08   ` Cédric Le Goater

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220503060634.122722-10-clg@kaod.org \
    --to=clg@kaod.org \
    --cc=andrew@aj.id.au \
    --cc=broonie@kernel.org \
    --cc=chin-ting_kuo@aspeedtech.com \
    --cc=devicetree@vger.kernel.org \
    --cc=joel@jms.id.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-aspeed@lists.ozlabs.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=p.yadav@ti.com \
    --cc=quic_jaehyoo@quicinc.com \
    --cc=rentao.bupt@gmail.com \
    --cc=richard@nod.at \
    --cc=robh+dt@kernel.org \
    --cc=tudor.ambarus@microchip.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.