All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH net 0/6] wireguard patches for 5.18-rc6
@ 2022-05-04 20:29 Jason A. Donenfeld
  2022-05-04 20:29 ` [PATCH net 1/6] wireguard: selftests: make routing loop test non-fatal Jason A. Donenfeld
                   ` (5 more replies)
  0 siblings, 6 replies; 7+ messages in thread
From: Jason A. Donenfeld @ 2022-05-04 20:29 UTC (permalink / raw)
  To: netdev, kuba; +Cc: Jason A. Donenfeld

Hi,

In working on some other problems, I wound up leaning on the WireGuard
CI more than usual and uncovered a few small issues with reliability.
These are fairly low key changes, since they don't impact kernel code
itself.

One change does stick out in particular, though, which is the "make
routing loop test non-fatal" commit. I'm not thrilled about doing this,
but currently [1] remains unsolved, and I'm still working on a real
solution to that (hopefully for 5.19 or 5.20 if I can come up with a
good idea...), so for now that test just prints a big red warning
instead.

Thanks,
Jason

[1] https://lore.kernel.org/netdev/YmszSXueTxYOC41G@zx2c4.com/


Jason A. Donenfeld (6):
  wireguard: selftests: make routing loop test non-fatal
  wireguard: selftests: limit parallelism to $(nproc) tests at once
  wireguard: selftests: use newer toolchains to fill out architectures
  wireguard: selftests: restore support for ccache
  wireguard: selftests: bump package deps
  wireguard: selftests: set panic_on_warn=1 from cmdline

 tools/testing/selftests/wireguard/netns.sh    |  34 ++-
 .../selftests/wireguard/qemu/.gitignore       |   1 +
 .../testing/selftests/wireguard/qemu/Makefile | 205 ++++++++++++------
 .../wireguard/qemu/arch/aarch64.config        |   5 +-
 .../wireguard/qemu/arch/aarch64_be.config     |   5 +-
 .../selftests/wireguard/qemu/arch/arm.config  |   5 +-
 .../wireguard/qemu/arch/armeb.config          |   5 +-
 .../selftests/wireguard/qemu/arch/i686.config |   2 +-
 .../selftests/wireguard/qemu/arch/m68k.config |   2 +-
 .../selftests/wireguard/qemu/arch/mips.config |   2 +-
 .../wireguard/qemu/arch/mips64.config         |   2 +-
 .../wireguard/qemu/arch/mips64el.config       |   2 +-
 .../wireguard/qemu/arch/mipsel.config         |   2 +-
 .../wireguard/qemu/arch/powerpc.config        |   2 +-
 .../wireguard/qemu/arch/powerpc64.config      |  13 ++
 .../wireguard/qemu/arch/powerpc64le.config    |   2 +-
 .../wireguard/qemu/arch/riscv32.config        |  12 +
 .../wireguard/qemu/arch/riscv64.config        |  12 +
 .../wireguard/qemu/arch/s390x.config          |   6 +
 .../wireguard/qemu/arch/x86_64.config         |   2 +-
 tools/testing/selftests/wireguard/qemu/init.c |   6 -
 21 files changed, 228 insertions(+), 99 deletions(-)
 create mode 100644 tools/testing/selftests/wireguard/qemu/arch/powerpc64.config
 create mode 100644 tools/testing/selftests/wireguard/qemu/arch/riscv32.config
 create mode 100644 tools/testing/selftests/wireguard/qemu/arch/riscv64.config
 create mode 100644 tools/testing/selftests/wireguard/qemu/arch/s390x.config

-- 
2.35.1


^ permalink raw reply	[flat|nested] 7+ messages in thread
* [PATCH net 1/6] wireguard: selftests: make routing loop test non-fatal
  2022-05-04 20:29 [PATCH net 0/6] wireguard patches for 5.18-rc6 Jason A. Donenfeld
@ 2022-05-04 20:29 ` Jason A. Donenfeld
  2022-05-04 20:29 ` [PATCH net 2/6] wireguard: selftests: limit parallelism to $(nproc) tests at once Jason A. Donenfeld
                   ` (4 subsequent siblings)
  5 siblings, 0 replies; 7+ messages in thread
From: Jason A. Donenfeld @ 2022-05-04 20:29 UTC (permalink / raw)
  To: netdev, kuba; +Cc: Jason A. Donenfeld

I hate to do this, but I still do not have a good solution to actually
fix this bug across architectures. So just disable it for now, so that
the CI can still deliver actionable results. This commit adds a large
red warning, so that at least the failure isn't lost forever, and
hopefully this can be revisited down the line.

Link: https://lore.kernel.org/netdev/CAHmME9pv1x6C4TNdL6648HydD8r+txpV4hTUXOBVkrapBXH4QQ@mail.gmail.com/
Link: https://lore.kernel.org/netdev/YmszSXueTxYOC41G@zx2c4.com/
Link: https://lore.kernel.org/wireguard/CAHmME9rNnBiNvBstb7MPwK-7AmAN0sOfnhdR=eeLrowWcKxaaQ@mail.gmail.com/
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
 tools/testing/selftests/wireguard/netns.sh | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/wireguard/netns.sh b/tools/testing/selftests/wireguard/netns.sh
index 8a9461aa0878..8a543200a61a 100755
--- a/tools/testing/selftests/wireguard/netns.sh
+++ b/tools/testing/selftests/wireguard/netns.sh
@@ -280,7 +280,19 @@ read _ _ tx_bytes_before < <(n0 wg show wg1 transfer)
 ! n0 ping -W 1 -c 10 -f 192.168.241.2 || false
 sleep 1
 read _ _ tx_bytes_after < <(n0 wg show wg1 transfer)
-(( tx_bytes_after - tx_bytes_before < 70000 ))
+if ! (( tx_bytes_after - tx_bytes_before < 70000 )); then
+	errstart=$'\x1b[37m\x1b[41m\x1b[1m'
+	errend=$'\x1b[0m'
+	echo "${errstart}                                                ${errend}"
+	echo "${errstart}                   E  R  R  O  R                ${errend}"
+	echo "${errstart}                                                ${errend}"
+	echo "${errstart} This architecture does not do the right thing  ${errend}"
+	echo "${errstart} with cross-namespace routing loops. This test  ${errend}"
+	echo "${errstart} has thus technically failed but, as this issue ${errend}"
+	echo "${errstart} is as yet unsolved, these tests will continue  ${errend}"
+	echo "${errstart} onward. :(                                     ${errend}"
+	echo "${errstart}                                                ${errend}"
+fi
 
 ip0 link del wg1
 ip1 link del wg0
-- 
2.35.1


^ permalink raw reply related	[flat|nested] 7+ messages in thread
* [PATCH net 2/6] wireguard: selftests: limit parallelism to $(nproc) tests at once
  2022-05-04 20:29 [PATCH net 0/6] wireguard patches for 5.18-rc6 Jason A. Donenfeld
  2022-05-04 20:29 ` [PATCH net 1/6] wireguard: selftests: make routing loop test non-fatal Jason A. Donenfeld
@ 2022-05-04 20:29 ` Jason A. Donenfeld
  2022-05-04 20:29 ` [PATCH net 3/6] wireguard: selftests: use newer toolchains to fill out architectures Jason A. Donenfeld
                   ` (3 subsequent siblings)
  5 siblings, 0 replies; 7+ messages in thread
From: Jason A. Donenfeld @ 2022-05-04 20:29 UTC (permalink / raw)
  To: netdev, kuba; +Cc: Jason A. Donenfeld

The parallel tests were added to catch queueing issues from multiple
cores. But what happens in reality when testing tons of processes is
that these separate threads wind up fighting with the scheduler, and we
wind up with contention in places we don't care about that decrease the
chances of hitting a bug. So just do a test with the number of CPU
cores, rather than trying to scale up arbitrarily.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
 tools/testing/selftests/wireguard/netns.sh | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/tools/testing/selftests/wireguard/netns.sh b/tools/testing/selftests/wireguard/netns.sh
index 8a543200a61a..69c7796c7ca9 100755
--- a/tools/testing/selftests/wireguard/netns.sh
+++ b/tools/testing/selftests/wireguard/netns.sh
@@ -22,10 +22,12 @@
 # interfaces in $ns1 and $ns2. See https://www.wireguard.com/netns/ for further
 # details on how this is accomplished.
 set -e
+shopt -s extglob
 
 exec 3>&1
 export LANG=C
 export WG_HIDE_KEYS=never
+NPROC=( /sys/devices/system/cpu/cpu+([0-9]) ); NPROC=${#NPROC[@]}
 netns0="wg-test-$$-0"
 netns1="wg-test-$$-1"
 netns2="wg-test-$$-2"
@@ -143,17 +145,15 @@ tests() {
 	n1 iperf3 -Z -t 3 -b 0 -u -c fd00::2
 
 	# TCP over IPv4, in parallel
-	for max in 4 5 50; do
-		local pids=( )
-		for ((i=0; i < max; ++i)) do
-			n2 iperf3 -p $(( 5200 + i )) -s -1 -B 192.168.241.2 &
-			pids+=( $! ); waitiperf $netns2 $! $(( 5200 + i ))
-		done
-		for ((i=0; i < max; ++i)) do
-			n1 iperf3 -Z -t 3 -p $(( 5200 + i )) -c 192.168.241.2 &
-		done
-		wait "${pids[@]}"
+	local pids=( ) i
+	for ((i=0; i < NPROC; ++i)) do
+		n2 iperf3 -p $(( 5200 + i )) -s -1 -B 192.168.241.2 &
+		pids+=( $! ); waitiperf $netns2 $! $(( 5200 + i ))
 	done
+	for ((i=0; i < NPROC; ++i)) do
+		n1 iperf3 -Z -t 3 -p $(( 5200 + i )) -c 192.168.241.2 &
+	done
+	wait "${pids[@]}"
 }
 
 [[ $(ip1 link show dev wg0) =~ mtu\ ([0-9]+) ]] && orig_mtu="${BASH_REMATCH[1]}"
-- 
2.35.1


^ permalink raw reply related	[flat|nested] 7+ messages in thread
* [PATCH net 3/6] wireguard: selftests: use newer toolchains to fill out architectures
  2022-05-04 20:29 [PATCH net 0/6] wireguard patches for 5.18-rc6 Jason A. Donenfeld
  2022-05-04 20:29 ` [PATCH net 1/6] wireguard: selftests: make routing loop test non-fatal Jason A. Donenfeld
  2022-05-04 20:29 ` [PATCH net 2/6] wireguard: selftests: limit parallelism to $(nproc) tests at once Jason A. Donenfeld
@ 2022-05-04 20:29 ` Jason A. Donenfeld
  2022-05-04 20:29 ` [PATCH net 4/6] wireguard: selftests: restore support for ccache Jason A. Donenfeld
                   ` (2 subsequent siblings)
  5 siblings, 0 replies; 7+ messages in thread
From: Jason A. Donenfeld @ 2022-05-04 20:29 UTC (permalink / raw)
  To: netdev, kuba; +Cc: Jason A. Donenfeld

Rather than relying on the system to have cross toolchains available,
simply download musl.cc's ones and use that libc.so, and then we use it
to fill in a few missing platforms, such as riscv64, riscv64, powerpc64,
and s390x.

Since riscv doesn't have a second serial port in its device description,
we have to use virtio's vport. This is actually the same situation on
ARM, but we were previously hacking QEMU up to work around this, which
required a custom QEMU. Instead just do the vport trick on ARM too.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
 .../testing/selftests/wireguard/qemu/Makefile | 169 ++++++++++++------
 .../wireguard/qemu/arch/aarch64.config        |   5 +-
 .../wireguard/qemu/arch/aarch64_be.config     |   5 +-
 .../selftests/wireguard/qemu/arch/arm.config  |   5 +-
 .../wireguard/qemu/arch/armeb.config          |   5 +-
 .../wireguard/qemu/arch/powerpc64.config      |  13 ++
 .../wireguard/qemu/arch/riscv32.config        |  12 ++
 .../wireguard/qemu/arch/riscv64.config        |  12 ++
 .../wireguard/qemu/arch/s390x.config          |   6 +
 9 files changed, 169 insertions(+), 63 deletions(-)
 create mode 100644 tools/testing/selftests/wireguard/qemu/arch/powerpc64.config
 create mode 100644 tools/testing/selftests/wireguard/qemu/arch/riscv32.config
 create mode 100644 tools/testing/selftests/wireguard/qemu/arch/riscv64.config
 create mode 100644 tools/testing/selftests/wireguard/qemu/arch/s390x.config

diff --git a/tools/testing/selftests/wireguard/qemu/Makefile b/tools/testing/selftests/wireguard/qemu/Makefile
index 4bdd6c1a19d3..930f59c9e714 100644
--- a/tools/testing/selftests/wireguard/qemu/Makefile
+++ b/tools/testing/selftests/wireguard/qemu/Makefile
@@ -4,26 +4,24 @@
 
 PWD := $(shell pwd)
 
-CHOST := $(shell gcc -dumpmachine)
-HOST_ARCH := $(firstword $(subst -, ,$(CHOST)))
-ifneq (,$(ARCH))
-CBUILD := $(subst -gcc,,$(lastword $(subst /, ,$(firstword $(wildcard $(foreach bindir,$(subst :, ,$(PATH)),$(bindir)/$(ARCH)-*-gcc))))))
-ifeq (,$(CBUILD))
-$(error The toolchain for $(ARCH) is not installed)
-endif
-else
-CBUILD := $(CHOST)
-ARCH := $(firstword $(subst -, ,$(CBUILD)))
-endif
-
 # Set these from the environment to override
 KERNEL_PATH ?= $(PWD)/../../../../..
 BUILD_PATH ?= $(PWD)/build/$(ARCH)
 DISTFILES_PATH ?= $(PWD)/distfiles
 NR_CPUS ?= 4
+ARCH ?=
+CBUILD := $(shell gcc -dumpmachine)
+HOST_ARCH := $(firstword $(subst -, ,$(CBUILD)))
+ifeq ($(ARCH),)
+ARCH := $(HOST_ARCH)
+endif
 
 MIRROR := https://download.wireguard.com/qemu-test/distfiles/
 
+KERNEL_BUILD_PATH := $(BUILD_PATH)/kernel$(if $(findstring yes,$(DEBUG_KERNEL)),-debug)
+rwildcard=$(foreach d,$(wildcard $1*),$(call rwildcard,$d/,$2) $(filter $(subst *,%,$2),$d))
+WIREGUARD_SOURCES := $(call rwildcard,$(KERNEL_PATH)/drivers/net/wireguard/,*)
+
 default: qemu
 
 # variable name, tarball project name, version, tarball extension, default URI base
@@ -36,12 +34,11 @@ $(call file_download,$$($(1)_NAME)$(4),$(5),$(6))
 endef
 
 define file_download =
-$(DISTFILES_PATH)/$(1):
+$(DISTFILES_PATH)/$(1): | $(4)
 	mkdir -p $(DISTFILES_PATH)
-	flock -x $$@.lock -c '[ -f $$@ ] && exit 0; wget -O $$@.tmp $(MIRROR)$(1) || wget -O $$@.tmp $(2)$(1) || rm -f $$@.tmp; [ -f $$@.tmp ] || exit 1; if echo "$(3)  $$@.tmp" | sha256sum -c -; then mv $$@.tmp $$@; else rm -f $$@.tmp; exit 71; fi'
+	flock -x $$@.lock -c '[ -f $$@ ] && exit 0; wget -O $$@.tmp $(MIRROR)$(1) || wget -O $$@.tmp $(2)$(1) || rm -f $$@.tmp; [ -f $$@.tmp ] || exit 1; if ([ -n "$(4)" ] && sed -n "s#^\([a-f0-9]\{64\}\)  \($(1)\)\$$$$#\1  $(DISTFILES_PATH)/\2.tmp#p" "$(4)" || echo "$(3)  $$@.tmp") | sha256sum -c -; then mv $$@.tmp $$@; else rm -f $$@.tmp; exit 71; fi'
 endef
 
-$(eval $(call tar_download,MUSL,musl,1.2.0,.tar.gz,https://musl.libc.org/releases/,c6de7b191139142d3f9a7b5b702c9cae1b5ee6e7f57e582da9328629408fd4e8))
 $(eval $(call tar_download,IPERF,iperf,3.7,.tar.gz,https://downloads.es.net/pub/iperf/,d846040224317caf2f75c843d309a950a7db23f9b44b94688ccbe557d6d1710c))
 $(eval $(call tar_download,BASH,bash,5.0,.tar.gz,https://ftp.gnu.org/gnu/bash/,b4a80f2ac66170b2913efbfb9f2594f1f76c7b1afd11f799e22035d63077fb4d))
 $(eval $(call tar_download,IPROUTE2,iproute2,5.6.0,.tar.xz,https://www.kernel.org/pub/linux/utils/net/iproute2/,1b5b0e25ce6e23da7526ea1da044e814ad85ba761b10dd29c2b027c056b04692))
@@ -50,28 +47,20 @@ $(eval $(call tar_download,NMAP,nmap,7.80,.tar.bz2,https://nmap.org/dist/,fcfa5a
 $(eval $(call tar_download,IPUTILS,iputils,s20190709,.tar.gz,https://github.com/iputils/iputils/archive/s20190709.tar.gz/#,a15720dd741d7538dd2645f9f516d193636ae4300ff7dbc8bfca757bf166490a))
 $(eval $(call tar_download,WIREGUARD_TOOLS,wireguard-tools,1.0.20200206,.tar.xz,https://git.zx2c4.com/wireguard-tools/snapshot/,f5207248c6a3c3e3bfc9ab30b91c1897b00802ed861e1f9faaed873366078c64))
 
-KERNEL_BUILD_PATH := $(BUILD_PATH)/kernel$(if $(findstring yes,$(DEBUG_KERNEL)),-debug)
-rwildcard=$(foreach d,$(wildcard $1*),$(call rwildcard,$d/,$2) $(filter $(subst *,%,$2),$d))
-WIREGUARD_SOURCES := $(call rwildcard,$(KERNEL_PATH)/drivers/net/wireguard/,*)
-
-export CFLAGS ?= -O3 -pipe
-export LDFLAGS ?=
-export CPPFLAGS := -I$(BUILD_PATH)/include
-
+export CFLAGS := -O3 -pipe
 ifeq ($(HOST_ARCH),$(ARCH))
-CROSS_COMPILE_FLAG := --host=$(CHOST)
 CFLAGS += -march=native
-STRIP := strip
-else
-$(info Cross compilation: building for $(CBUILD) using $(CHOST))
-CROSS_COMPILE_FLAG := --build=$(CBUILD) --host=$(CHOST)
-export CROSS_COMPILE=$(CBUILD)-
-STRIP := $(CBUILD)-strip
 endif
+export LDFLAGS :=
+export CPPFLAGS :=
+
+QEMU_VPORT_RESULT :=
 ifeq ($(ARCH),aarch64)
+CHOST := aarch64-linux-musl
 QEMU_ARCH := aarch64
 KERNEL_ARCH := arm64
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/arm64/boot/Image
+QEMU_VPORT_RESULT := virtio-serial-device
 ifeq ($(HOST_ARCH),$(ARCH))
 QEMU_MACHINE := -cpu host -machine virt,gic_version=host,accel=kvm
 else
@@ -79,9 +68,11 @@ QEMU_MACHINE := -cpu cortex-a53 -machine virt
 CFLAGS += -march=armv8-a -mtune=cortex-a53
 endif
 else ifeq ($(ARCH),aarch64_be)
+CHOST := aarch64_be-linux-musl
 QEMU_ARCH := aarch64
 KERNEL_ARCH := arm64
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/arm64/boot/Image
+QEMU_VPORT_RESULT := virtio-serial-device
 ifeq ($(HOST_ARCH),$(ARCH))
 QEMU_MACHINE := -cpu host -machine virt,gic_version=host,accel=kvm
 else
@@ -89,9 +80,11 @@ QEMU_MACHINE := -cpu cortex-a53 -machine virt
 CFLAGS += -march=armv8-a -mtune=cortex-a53
 endif
 else ifeq ($(ARCH),arm)
+CHOST := arm-linux-musleabi
 QEMU_ARCH := arm
 KERNEL_ARCH := arm
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/arm/boot/zImage
+QEMU_VPORT_RESULT := virtio-serial-device
 ifeq ($(HOST_ARCH),$(ARCH))
 QEMU_MACHINE := -cpu host -machine virt,gic_version=host,accel=kvm
 else
@@ -99,9 +92,11 @@ QEMU_MACHINE := -cpu cortex-a15 -machine virt
 CFLAGS += -march=armv7-a -mtune=cortex-a15 -mabi=aapcs-linux
 endif
 else ifeq ($(ARCH),armeb)
+CHOST := armeb-linux-musleabi
 QEMU_ARCH := arm
 KERNEL_ARCH := arm
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/arm/boot/zImage
+QEMU_VPORT_RESULT := virtio-serial-device
 ifeq ($(HOST_ARCH),$(ARCH))
 QEMU_MACHINE := -cpu host -machine virt,gic_version=host,accel=kvm
 else
@@ -110,6 +105,7 @@ CFLAGS += -march=armv7-a -mabi=aapcs-linux # We don't pass -mtune=cortex-a15 due
 LDFLAGS += -Wl,--be8
 endif
 else ifeq ($(ARCH),x86_64)
+CHOST := x86_64-linux-musl
 QEMU_ARCH := x86_64
 KERNEL_ARCH := x86_64
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/x86/boot/bzImage
@@ -120,6 +116,7 @@ QEMU_MACHINE := -cpu Skylake-Server -machine q35
 CFLAGS += -march=skylake-avx512
 endif
 else ifeq ($(ARCH),i686)
+CHOST := i686-linux-musl
 QEMU_ARCH := i386
 KERNEL_ARCH := x86
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/x86/boot/bzImage
@@ -130,6 +127,7 @@ QEMU_MACHINE := -cpu coreduo -machine q35
 CFLAGS += -march=prescott
 endif
 else ifeq ($(ARCH),mips64)
+CHOST := mips64-linux-musl
 QEMU_ARCH := mips64
 KERNEL_ARCH := mips
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
@@ -141,6 +139,7 @@ QEMU_MACHINE := -cpu MIPS64R2-generic -machine malta -smp 1
 CFLAGS += -march=mips64r2 -EB
 endif
 else ifeq ($(ARCH),mips64el)
+CHOST := mips64el-linux-musl
 QEMU_ARCH := mips64el
 KERNEL_ARCH := mips
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
@@ -152,6 +151,7 @@ QEMU_MACHINE := -cpu MIPS64R2-generic -machine malta -smp 1
 CFLAGS += -march=mips64r2 -EL
 endif
 else ifeq ($(ARCH),mips)
+CHOST := mips-linux-musl
 QEMU_ARCH := mips
 KERNEL_ARCH := mips
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
@@ -163,6 +163,7 @@ QEMU_MACHINE := -cpu 24Kf -machine malta -smp 1
 CFLAGS += -march=mips32r2 -EB
 endif
 else ifeq ($(ARCH),mipsel)
+CHOST := mipsel-linux-musl
 QEMU_ARCH := mipsel
 KERNEL_ARCH := mips
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
@@ -173,7 +174,18 @@ else
 QEMU_MACHINE := -cpu 24Kf -machine malta -smp 1
 CFLAGS += -march=mips32r2 -EL
 endif
+else ifeq ($(ARCH),powerpc64)
+CHOST := powerpc64-linux-musl
+QEMU_ARCH := ppc64
+KERNEL_ARCH := powerpc
+KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
+ifeq ($(HOST_ARCH),$(ARCH))
+QEMU_MACHINE := -cpu host,accel=kvm -machine pseries
+else
+QEMU_MACHINE := -machine pseries
+endif
 else ifeq ($(ARCH),powerpc64le)
+CHOST := powerpc64le-linux-musl
 QEMU_ARCH := ppc64
 KERNEL_ARCH := powerpc
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
@@ -182,8 +194,8 @@ QEMU_MACHINE := -cpu host,accel=kvm -machine pseries
 else
 QEMU_MACHINE := -machine pseries
 endif
-CFLAGS += -mcpu=powerpc64le -mlong-double-64
 else ifeq ($(ARCH),powerpc)
+CHOST := powerpc-linux-musl
 QEMU_ARCH := ppc
 KERNEL_ARCH := powerpc
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/powerpc/boot/uImage
@@ -192,26 +204,72 @@ QEMU_MACHINE := -cpu host,accel=kvm -machine ppce500
 else
 QEMU_MACHINE := -machine ppce500
 endif
-CFLAGS += -mcpu=powerpc -mlong-double-64 -msecure-plt
 else ifeq ($(ARCH),m68k)
+CHOST := m68k-linux-musl
 QEMU_ARCH := m68k
 KERNEL_ARCH := m68k
 KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/vmlinux
 KERNEL_CMDLINE := $(shell sed -n 's/CONFIG_CMDLINE=\(.*\)/\1/p' arch/m68k.config)
 ifeq ($(HOST_ARCH),$(ARCH))
-QEMU_MACHINE := -cpu host,accel=kvm -machine q800 -smp 1 -append $(KERNEL_CMDLINE)
+QEMU_MACHINE := -cpu host,accel=kvm -machine q800 -append $(KERNEL_CMDLINE)
 else
 QEMU_MACHINE := -machine q800 -smp 1 -append $(KERNEL_CMDLINE)
 endif
+else ifeq ($(ARCH),riscv64)
+CHOST := riscv64-linux-musl
+QEMU_ARCH := riscv64
+KERNEL_ARCH := riscv
+KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/riscv/boot/Image
+QEMU_VPORT_RESULT := virtio-serial-device
+ifeq ($(HOST_ARCH),$(ARCH))
+QEMU_MACHINE := -cpu host,accel=kvm -machine virt
+else
+QEMU_MACHINE := -cpu rv64 -machine virt
+endif
+else ifeq ($(ARCH),riscv32)
+CHOST := riscv32-linux-musl
+QEMU_ARCH := riscv32
+KERNEL_ARCH := riscv
+KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/riscv/boot/Image
+QEMU_VPORT_RESULT := virtio-serial-device
+ifeq ($(HOST_ARCH),$(ARCH))
+QEMU_MACHINE := -cpu host,accel=kvm -machine virt
+else
+QEMU_MACHINE := -cpu rv32 -machine virt
+endif
+else ifeq ($(ARCH),s390x)
+CHOST := s390x-linux-musl
+QEMU_ARCH := s390x
+KERNEL_ARCH := s390
+KERNEL_BZIMAGE := $(KERNEL_BUILD_PATH)/arch/s390/boot/bzImage
+KERNEL_CMDLINE := $(shell sed -n 's/CONFIG_CMDLINE=\(.*\)/\1/p' arch/s390x.config)
+QEMU_VPORT_RESULT := virtio-serial-ccw
+ifeq ($(HOST_ARCH),$(ARCH))
+QEMU_MACHINE := -cpu host,accel=kvm -machine s390-ccw-virtio -append $(KERNEL_CMDLINE)
 else
-$(error I only build: x86_64, i686, arm, armeb, aarch64, aarch64_be, mips, mipsel, mips64, mips64el, powerpc64le, powerpc, m68k)
+QEMU_MACHINE := -machine s390-ccw-virtio -append $(KERNEL_CMDLINE)
 endif
+else
+$(error I only build: x86_64, i686, arm, armeb, aarch64, aarch64_be, mips, mipsel, mips64, mips64el, powerpc64, powerpc64le, powerpc, m68k, riscv64, riscv32, s390x)
+endif
+
+TOOLCHAIN_FILENAME := $(CHOST)-cross.tgz
+TOOLCHAIN_TAR := $(DISTFILES_PATH)/$(TOOLCHAIN_FILENAME)
+TOOLCHAIN_PATH := $(BUILD_PATH)/$(CHOST)-cross
+TOOLCHAIN_DIR := https://download.wireguard.com/qemu-test/toolchains/20211123/
+$(eval $(call file_download,toolchain-sha256sums-20211123,$(TOOLCHAIN_DIR)SHA256SUMS#,83da033fd8c798df476c21d9612da2dfb896ec62fbed4ceec5eefc0e56b3f0c8))
+$(eval $(call file_download,$(TOOLCHAIN_FILENAME),$(TOOLCHAIN_DIR),,$(DISTFILES_PATH)/toolchain-sha256sums-20211123))
 
-REAL_CC := $(CBUILD)-gcc
-MUSL_CC := $(BUILD_PATH)/musl-gcc
-export CC := $(MUSL_CC)
-USERSPACE_DEPS := $(MUSL_CC) $(BUILD_PATH)/include/.installed $(BUILD_PATH)/include/linux/.installed
+STRIP := $(CHOST)-strip
+CROSS_COMPILE_FLAG := --build=$(CBUILD) --host=$(CHOST)
+$(info Building for $(CHOST) using $(CBUILD))
+export CROSS_COMPILE := $(CHOST)-
+export PATH := $(TOOLCHAIN_PATH)/bin:$(PATH)
+export CC := $(CHOST)-gcc
+
+USERSPACE_DEPS := $(TOOLCHAIN_PATH)/.installed $(TOOLCHAIN_PATH)/$(CHOST)/include/linux/.installed
 
+comma := ,
 build: $(KERNEL_BZIMAGE)
 qemu: $(KERNEL_BZIMAGE)
 	rm -f $(BUILD_PATH)/result
@@ -222,13 +280,14 @@ qemu: $(KERNEL_BZIMAGE)
 		$(QEMU_MACHINE) \
 		-m $$(grep -q CONFIG_DEBUG_KMEMLEAK=y $(KERNEL_BUILD_PATH)/.config && echo 1G || echo 256M) \
 		-serial stdio \
-		-serial file:$(BUILD_PATH)/result \
+		-chardev file,path=$(BUILD_PATH)/result,id=result \
+		$(if $(QEMU_VPORT_RESULT),-device $(QEMU_VPORT_RESULT) -device virtserialport$(comma)chardev=result,-serial chardev:result) \
 		-no-reboot \
 		-monitor none \
 		-kernel $<
 	grep -Fq success $(BUILD_PATH)/result
 
-$(BUILD_PATH)/init-cpio-spec.txt:
+$(BUILD_PATH)/init-cpio-spec.txt: $(TOOLCHAIN_PATH)/.installed $(BUILD_PATH)/init
 	mkdir -p $(BUILD_PATH)
 	echo "file /init $(BUILD_PATH)/init 755 0 0" > $@
 	echo "file /init.sh $(PWD)/../netns.sh 755 0 0" >> $@
@@ -246,10 +305,10 @@ $(BUILD_PATH)/init-cpio-spec.txt:
 	echo "slink /bin/iptables xtables-legacy-multi 777 0 0" >> $@
 	echo "slink /bin/ping6 ping 777 0 0" >> $@
 	echo "dir /lib 755 0 0" >> $@
-	echo "file /lib/libc.so $(MUSL_PATH)/lib/libc.so 755 0 0" >> $@
-	echo "slink /lib/ld-linux.so.1 libc.so 777 0 0" >> $@
+	echo "file /lib/libc.so $(TOOLCHAIN_PATH)/$(CHOST)/lib/libc.so 755 0 0" >> $@
+	echo "slink $$($(CHOST)-readelf -p .interp '$(BUILD_PATH)/init'| grep -o '/lib/.*') libc.so 777 0 0" >> $@
 
-$(KERNEL_BUILD_PATH)/.config: kernel.config arch/$(ARCH).config
+$(KERNEL_BUILD_PATH)/.config: $(TOOLCHAIN_PATH)/.installed kernel.config arch/$(ARCH).config
 	mkdir -p $(KERNEL_BUILD_PATH)
 	cp kernel.config $(KERNEL_BUILD_PATH)/minimal.config
 	printf 'CONFIG_NR_CPUS=$(NR_CPUS)\nCONFIG_INITRAMFS_SOURCE="$(BUILD_PATH)/init-cpio-spec.txt"\n' >> $(KERNEL_BUILD_PATH)/minimal.config
@@ -258,29 +317,20 @@ $(KERNEL_BUILD_PATH)/.config: kernel.config arch/$(ARCH).config
 	cd $(KERNEL_BUILD_PATH) && ARCH=$(KERNEL_ARCH) $(KERNEL_PATH)/scripts/kconfig/merge_config.sh -n $(KERNEL_BUILD_PATH)/.config $(KERNEL_BUILD_PATH)/minimal.config
 	$(if $(findstring yes,$(DEBUG_KERNEL)),cp debug.config $(KERNEL_BUILD_PATH) && cd $(KERNEL_BUILD_PATH) && ARCH=$(KERNEL_ARCH) $(KERNEL_PATH)/scripts/kconfig/merge_config.sh -n $(KERNEL_BUILD_PATH)/.config debug.config,)
 
-$(KERNEL_BZIMAGE): $(KERNEL_BUILD_PATH)/.config $(BUILD_PATH)/init-cpio-spec.txt $(MUSL_PATH)/lib/libc.so $(IPERF_PATH)/src/iperf3 $(IPUTILS_PATH)/ping $(BASH_PATH)/bash $(IPROUTE2_PATH)/misc/ss $(IPROUTE2_PATH)/ip/ip $(IPTABLES_PATH)/iptables/xtables-legacy-multi $(NMAP_PATH)/ncat/ncat $(WIREGUARD_TOOLS_PATH)/src/wg $(BUILD_PATH)/init ../netns.sh $(WIREGUARD_SOURCES)
+$(KERNEL_BZIMAGE): $(TOOLCHAIN_PATH)/.installed $(KERNEL_BUILD_PATH)/.config $(BUILD_PATH)/init-cpio-spec.txt $(IPERF_PATH)/src/iperf3 $(IPUTILS_PATH)/ping $(BASH_PATH)/bash $(IPROUTE2_PATH)/misc/ss $(IPROUTE2_PATH)/ip/ip $(IPTABLES_PATH)/iptables/xtables-legacy-multi $(NMAP_PATH)/ncat/ncat $(WIREGUARD_TOOLS_PATH)/src/wg $(BUILD_PATH)/init ../netns.sh $(WIREGUARD_SOURCES)
 	$(MAKE) -C $(KERNEL_PATH) O=$(KERNEL_BUILD_PATH) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(CROSS_COMPILE)
 
-$(BUILD_PATH)/include/linux/.installed: | $(KERNEL_BUILD_PATH)/.config
-	$(MAKE) -C $(KERNEL_PATH) O=$(KERNEL_BUILD_PATH) INSTALL_HDR_PATH=$(BUILD_PATH) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(CROSS_COMPILE) headers_install
+$(TOOLCHAIN_PATH)/$(CHOST)/include/linux/.installed: | $(KERNEL_BUILD_PATH)/.config $(TOOLCHAIN_PATH)/.installed
+	rm -rf $(TOOLCHAIN_PATH)/$(CHOST)/include/linux
+	$(MAKE) -C $(KERNEL_PATH) O=$(KERNEL_BUILD_PATH) INSTALL_HDR_PATH=$(TOOLCHAIN_PATH)/$(CHOST) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(CROSS_COMPILE) headers_install
 	touch $@
 
-$(MUSL_PATH)/lib/libc.so: $(MUSL_TAR)
+$(TOOLCHAIN_PATH)/.installed: $(TOOLCHAIN_TAR)
 	mkdir -p $(BUILD_PATH)
 	flock -s $<.lock tar -C $(BUILD_PATH) -xf $<
-	cd $(MUSL_PATH) && CC=$(REAL_CC) ./configure --prefix=/ --disable-static --build=$(CBUILD)
-	$(MAKE) -C $(MUSL_PATH)
-	$(STRIP) -s $@
-
-$(BUILD_PATH)/include/.installed: $(MUSL_PATH)/lib/libc.so
-	$(MAKE) -C $(MUSL_PATH) DESTDIR=$(BUILD_PATH) install-headers
+	$(STRIP) -s $(TOOLCHAIN_PATH)/$(CHOST)/lib/libc.so
 	touch $@
 
-$(MUSL_CC): $(MUSL_PATH)/lib/libc.so
-	sh $(MUSL_PATH)/tools/musl-gcc.specs.sh $(BUILD_PATH)/include $(MUSL_PATH)/lib /lib/ld-linux.so.1 > $(BUILD_PATH)/musl-gcc.specs
-	printf '#!/bin/sh\nexec "$(REAL_CC)" --specs="$(BUILD_PATH)/musl-gcc.specs" "$$@"\n' > $(BUILD_PATH)/musl-gcc
-	chmod +x $(BUILD_PATH)/musl-gcc
-
 $(IPERF_PATH)/.installed: $(IPERF_TAR)
 	mkdir -p $(BUILD_PATH)
 	flock -s $<.lock tar -C $(BUILD_PATH) -xf $<
@@ -289,6 +339,7 @@ $(IPERF_PATH)/.installed: $(IPERF_TAR)
 	touch $@
 
 $(IPERF_PATH)/src/iperf3: | $(IPERF_PATH)/.installed $(USERSPACE_DEPS)
+	cd $(IPERF_PATH) && autoreconf -fi
 	cd $(IPERF_PATH) && CFLAGS="$(CFLAGS) -D_GNU_SOURCE" ./configure --prefix=/ $(CROSS_COMPILE_FLAG) --enable-static --disable-shared --with-openssl=no
 	$(MAKE) -C $(IPERF_PATH)
 	$(STRIP) -s $@
@@ -304,7 +355,7 @@ $(WIREGUARD_TOOLS_PATH)/src/wg: | $(WIREGUARD_TOOLS_PATH)/.installed $(USERSPACE
 
 $(BUILD_PATH)/init: init.c | $(USERSPACE_DEPS)
 	mkdir -p $(BUILD_PATH)
-	$(MUSL_CC) -o $@ $(CFLAGS) $(LDFLAGS) -std=gnu11 $<
+	$(CC) -o $@ $(CFLAGS) $(LDFLAGS) -std=gnu11 $<
 	$(STRIP) -s $@
 
 $(IPUTILS_PATH)/.installed: $(IPUTILS_TAR)
diff --git a/tools/testing/selftests/wireguard/qemu/arch/aarch64.config b/tools/testing/selftests/wireguard/qemu/arch/aarch64.config
index 3d063bb247bb..e9ac41f6b3ae 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/aarch64.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/aarch64.config
@@ -1,5 +1,8 @@
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_VIRTIO_MENU=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_CONSOLE=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyAMA0 wg.success=ttyAMA1"
+CONFIG_CMDLINE="console=ttyAMA0 wg.success=vport0p1"
 CONFIG_FRAME_WARN=1280
diff --git a/tools/testing/selftests/wireguard/qemu/arch/aarch64_be.config b/tools/testing/selftests/wireguard/qemu/arch/aarch64_be.config
index dbdc7e406a7b..03609a203e8c 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/aarch64_be.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/aarch64_be.config
@@ -1,6 +1,9 @@
 CONFIG_CPU_BIG_ENDIAN=y
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_VIRTIO_MENU=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_CONSOLE=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyAMA0 wg.success=ttyAMA1"
+CONFIG_CMDLINE="console=ttyAMA0 wg.success=vport0p1"
 CONFIG_FRAME_WARN=1280
diff --git a/tools/testing/selftests/wireguard/qemu/arch/arm.config b/tools/testing/selftests/wireguard/qemu/arch/arm.config
index 148f49905418..c616124fdd59 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/arm.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/arm.config
@@ -4,6 +4,9 @@ CONFIG_ARCH_VIRT=y
 CONFIG_THUMB2_KERNEL=n
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_VIRTIO_MENU=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_CONSOLE=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyAMA0 wg.success=ttyAMA1"
+CONFIG_CMDLINE="console=ttyAMA0 wg.success=vport0p1"
 CONFIG_FRAME_WARN=1024
diff --git a/tools/testing/selftests/wireguard/qemu/arch/armeb.config b/tools/testing/selftests/wireguard/qemu/arch/armeb.config
index bd76b07d00a2..d3a40a974e16 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/armeb.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/armeb.config
@@ -4,7 +4,10 @@ CONFIG_ARCH_VIRT=y
 CONFIG_THUMB2_KERNEL=n
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_VIRTIO_MENU=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_CONSOLE=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyAMA0 wg.success=ttyAMA1"
+CONFIG_CMDLINE="console=ttyAMA0 wg.success=vport0p1"
 CONFIG_CPU_BIG_ENDIAN=y
 CONFIG_FRAME_WARN=1024
diff --git a/tools/testing/selftests/wireguard/qemu/arch/powerpc64.config b/tools/testing/selftests/wireguard/qemu/arch/powerpc64.config
new file mode 100644
index 000000000000..c19c7b519d8b
--- /dev/null
+++ b/tools/testing/selftests/wireguard/qemu/arch/powerpc64.config
@@ -0,0 +1,13 @@
+CONFIG_PPC64=y
+CONFIG_PPC_PSERIES=y
+CONFIG_ALTIVEC=y
+CONFIG_VSX=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
+CONFIG_PPC_RADIX_MMU=y
+CONFIG_HVC_CONSOLE=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=hvc0 wg.success=hvc1"
+CONFIG_SECTION_MISMATCH_WARN_ONLY=y
+CONFIG_FRAME_WARN=1280
+CONFIG_THREAD_SHIFT=14
diff --git a/tools/testing/selftests/wireguard/qemu/arch/riscv32.config b/tools/testing/selftests/wireguard/qemu/arch/riscv32.config
new file mode 100644
index 000000000000..ea53e78e923e
--- /dev/null
+++ b/tools/testing/selftests/wireguard/qemu/arch/riscv32.config
@@ -0,0 +1,12 @@
+CONFIG_ARCH_RV32I=y
+CONFIG_MMU=y
+CONFIG_FPU=y
+CONFIG_SOC_VIRT=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_VIRTIO_MENU=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_CMDLINE="console=ttyS0 wg.success=vport0p1"
+CONFIG_CMDLINE_FORCE=y
diff --git a/tools/testing/selftests/wireguard/qemu/arch/riscv64.config b/tools/testing/selftests/wireguard/qemu/arch/riscv64.config
new file mode 100644
index 000000000000..4a08d8c1d4af
--- /dev/null
+++ b/tools/testing/selftests/wireguard/qemu/arch/riscv64.config
@@ -0,0 +1,12 @@
+CONFIG_ARCH_RV64I=y
+CONFIG_MMU=y
+CONFIG_FPU=y
+CONFIG_SOC_VIRT=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_VIRTIO_MENU=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_CMDLINE="console=ttyS0 wg.success=vport0p1"
+CONFIG_CMDLINE_FORCE=y
diff --git a/tools/testing/selftests/wireguard/qemu/arch/s390x.config b/tools/testing/selftests/wireguard/qemu/arch/s390x.config
new file mode 100644
index 000000000000..274a44f4e49c
--- /dev/null
+++ b/tools/testing/selftests/wireguard/qemu/arch/s390x.config
@@ -0,0 +1,6 @@
+CONFIG_SCLP_VT220_TTY=y
+CONFIG_SCLP_VT220_CONSOLE=y
+CONFIG_VIRTIO_MENU=y
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_S390_GUEST=y
+CONFIG_CMDLINE="console=ttysclp0 wg.success=vport0p1"
-- 
2.35.1


^ permalink raw reply related	[flat|nested] 7+ messages in thread
* [PATCH net 4/6] wireguard: selftests: restore support for ccache
  2022-05-04 20:29 [PATCH net 0/6] wireguard patches for 5.18-rc6 Jason A. Donenfeld
                   ` (2 preceding siblings ...)
  2022-05-04 20:29 ` [PATCH net 3/6] wireguard: selftests: use newer toolchains to fill out architectures Jason A. Donenfeld
@ 2022-05-04 20:29 ` Jason A. Donenfeld
  2022-05-04 20:29 ` [PATCH net 5/6] wireguard: selftests: bump package deps Jason A. Donenfeld
  2022-05-04 20:29 ` [PATCH net 6/6] wireguard: selftests: set panic_on_warn=1 from cmdline Jason A. Donenfeld
  5 siblings, 0 replies; 7+ messages in thread
From: Jason A. Donenfeld @ 2022-05-04 20:29 UTC (permalink / raw)
  To: netdev, kuba; +Cc: Jason A. Donenfeld

When moving to non-system toolchains, we inadvertantly killed the
ability to use ccache. So instead, build ccache support into the test
harness directly.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
 .../selftests/wireguard/qemu/.gitignore        |  1 +
 .../testing/selftests/wireguard/qemu/Makefile  | 18 +++++++++++++++++-
 2 files changed, 18 insertions(+), 1 deletion(-)

diff --git a/tools/testing/selftests/wireguard/qemu/.gitignore b/tools/testing/selftests/wireguard/qemu/.gitignore
index bfa15e6feb2f..42ab9d72b37b 100644
--- a/tools/testing/selftests/wireguard/qemu/.gitignore
+++ b/tools/testing/selftests/wireguard/qemu/.gitignore
@@ -1,3 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
 build/
 distfiles/
+ccache/
diff --git a/tools/testing/selftests/wireguard/qemu/Makefile b/tools/testing/selftests/wireguard/qemu/Makefile
index 930f59c9e714..e121ef3878af 100644
--- a/tools/testing/selftests/wireguard/qemu/Makefile
+++ b/tools/testing/selftests/wireguard/qemu/Makefile
@@ -266,6 +266,13 @@ $(info Building for $(CHOST) using $(CBUILD))
 export CROSS_COMPILE := $(CHOST)-
 export PATH := $(TOOLCHAIN_PATH)/bin:$(PATH)
 export CC := $(CHOST)-gcc
+CCACHE_PATH := $(shell which ccache 2>/dev/null)
+ifneq ($(CCACHE_PATH),)
+export KBUILD_BUILD_TIMESTAMP := Fri Jun  5 15:58:00 CEST 2015
+export PATH := $(TOOLCHAIN_PATH)/bin/ccache:$(PATH)
+export CCACHE_SLOPPINESS := file_macro,time_macros
+export CCACHE_DIR ?= $(PWD)/ccache
+endif
 
 USERSPACE_DEPS := $(TOOLCHAIN_PATH)/.installed $(TOOLCHAIN_PATH)/$(CHOST)/include/linux/.installed
 
@@ -329,6 +336,10 @@ $(TOOLCHAIN_PATH)/.installed: $(TOOLCHAIN_TAR)
 	mkdir -p $(BUILD_PATH)
 	flock -s $<.lock tar -C $(BUILD_PATH) -xf $<
 	$(STRIP) -s $(TOOLCHAIN_PATH)/$(CHOST)/lib/libc.so
+ifneq ($(CCACHE_PATH),)
+	mkdir -p $(TOOLCHAIN_PATH)/bin/ccache
+	ln -s $(CCACHE_PATH) $(TOOLCHAIN_PATH)/bin/ccache/$(CC)
+endif
 	touch $@
 
 $(IPERF_PATH)/.installed: $(IPERF_TAR)
@@ -421,8 +432,13 @@ clean:
 distclean: clean
 	rm -rf $(DISTFILES_PATH)
 
+cacheclean: clean
+ifneq ($(CCACHE_DIR),)
+	rm -rf $(CCACHE_DIR)
+endif
+
 menuconfig: $(KERNEL_BUILD_PATH)/.config
 	$(MAKE) -C $(KERNEL_PATH) O=$(KERNEL_BUILD_PATH) ARCH=$(KERNEL_ARCH) CROSS_COMPILE=$(CROSS_COMPILE) menuconfig
 
-.PHONY: qemu build clean distclean menuconfig
+.PHONY: qemu build clean distclean cacheclean menuconfig
 .DELETE_ON_ERROR:
-- 
2.35.1


^ permalink raw reply related	[flat|nested] 7+ messages in thread
* [PATCH net 5/6] wireguard: selftests: bump package deps
  2022-05-04 20:29 [PATCH net 0/6] wireguard patches for 5.18-rc6 Jason A. Donenfeld
                   ` (3 preceding siblings ...)
  2022-05-04 20:29 ` [PATCH net 4/6] wireguard: selftests: restore support for ccache Jason A. Donenfeld
@ 2022-05-04 20:29 ` Jason A. Donenfeld
  2022-05-04 20:29 ` [PATCH net 6/6] wireguard: selftests: set panic_on_warn=1 from cmdline Jason A. Donenfeld
  5 siblings, 0 replies; 7+ messages in thread
From: Jason A. Donenfeld @ 2022-05-04 20:29 UTC (permalink / raw)
  To: netdev, kuba; +Cc: Jason A. Donenfeld

Use newer, more reliable package dependencies. These should hopefully
reduce flakes. However, we keep the old iputils package, as it
accumulated bugs after resulting in flakes on slow machines.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
 .../testing/selftests/wireguard/qemu/Makefile  | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/tools/testing/selftests/wireguard/qemu/Makefile b/tools/testing/selftests/wireguard/qemu/Makefile
index e121ef3878af..bca07b93eeb0 100644
--- a/tools/testing/selftests/wireguard/qemu/Makefile
+++ b/tools/testing/selftests/wireguard/qemu/Makefile
@@ -39,13 +39,13 @@ $(DISTFILES_PATH)/$(1): | $(4)
 	flock -x $$@.lock -c '[ -f $$@ ] && exit 0; wget -O $$@.tmp $(MIRROR)$(1) || wget -O $$@.tmp $(2)$(1) || rm -f $$@.tmp; [ -f $$@.tmp ] || exit 1; if ([ -n "$(4)" ] && sed -n "s#^\([a-f0-9]\{64\}\)  \($(1)\)\$$$$#\1  $(DISTFILES_PATH)/\2.tmp#p" "$(4)" || echo "$(3)  $$@.tmp") | sha256sum -c -; then mv $$@.tmp $$@; else rm -f $$@.tmp; exit 71; fi'
 endef
 
-$(eval $(call tar_download,IPERF,iperf,3.7,.tar.gz,https://downloads.es.net/pub/iperf/,d846040224317caf2f75c843d309a950a7db23f9b44b94688ccbe557d6d1710c))
-$(eval $(call tar_download,BASH,bash,5.0,.tar.gz,https://ftp.gnu.org/gnu/bash/,b4a80f2ac66170b2913efbfb9f2594f1f76c7b1afd11f799e22035d63077fb4d))
-$(eval $(call tar_download,IPROUTE2,iproute2,5.6.0,.tar.xz,https://www.kernel.org/pub/linux/utils/net/iproute2/,1b5b0e25ce6e23da7526ea1da044e814ad85ba761b10dd29c2b027c056b04692))
-$(eval $(call tar_download,IPTABLES,iptables,1.8.4,.tar.bz2,https://www.netfilter.org/projects/iptables/files/,993a3a5490a544c2cbf2ef15cf7e7ed21af1845baf228318d5c36ef8827e157c))
-$(eval $(call tar_download,NMAP,nmap,7.80,.tar.bz2,https://nmap.org/dist/,fcfa5a0e42099e12e4bf7a68ebe6fde05553383a682e816a7ec9256ab4773faa))
+$(eval $(call tar_download,IPERF,iperf,3.11,.tar.gz,https://downloads.es.net/pub/iperf/,de8cb409fad61a0574f4cb07eb19ce1159707403ac2dc01b5d175e91240b7e5f))
+$(eval $(call tar_download,BASH,bash,5.1.16,.tar.gz,https://ftp.gnu.org/gnu/bash/,5bac17218d3911834520dad13cd1f85ab944e1c09ae1aba55906be1f8192f558))
+$(eval $(call tar_download,IPROUTE2,iproute2,5.17.0,.tar.gz,https://www.kernel.org/pub/linux/utils/net/iproute2/,bda331d5c4606138892f23a565d78fca18919b4d508a0b7ca8391c2da2db68b9))
+$(eval $(call tar_download,IPTABLES,iptables,1.8.7,.tar.bz2,https://www.netfilter.org/projects/iptables/files/,c109c96bb04998cd44156622d36f8e04b140701ec60531a10668cfdff5e8d8f0))
+$(eval $(call tar_download,NMAP,nmap,7.92,.tgz,https://nmap.org/dist/,064183ea642dc4c12b1ab3b5358ce1cef7d2e7e11ffa2849f16d339f5b717117))
 $(eval $(call tar_download,IPUTILS,iputils,s20190709,.tar.gz,https://github.com/iputils/iputils/archive/s20190709.tar.gz/#,a15720dd741d7538dd2645f9f516d193636ae4300ff7dbc8bfca757bf166490a))
-$(eval $(call tar_download,WIREGUARD_TOOLS,wireguard-tools,1.0.20200206,.tar.xz,https://git.zx2c4.com/wireguard-tools/snapshot/,f5207248c6a3c3e3bfc9ab30b91c1897b00802ed861e1f9faaed873366078c64))
+$(eval $(call tar_download,WIREGUARD_TOOLS,wireguard-tools,1.0.20210914,.tar.xz,https://git.zx2c4.com/wireguard-tools/snapshot/,97ff31489217bb265b7ae850d3d0f335ab07d2652ba1feec88b734bc96bd05ac))
 
 export CFLAGS := -O3 -pipe
 ifeq ($(HOST_ARCH),$(ARCH))
@@ -385,15 +385,15 @@ $(BASH_PATH)/.installed: $(BASH_TAR)
 	touch $@
 
 $(BASH_PATH)/bash: | $(BASH_PATH)/.installed $(USERSPACE_DEPS)
-	cd $(BASH_PATH) && ./configure --prefix=/ $(CROSS_COMPILE_FLAG) --without-bash-malloc --disable-debugger --disable-help-builtin --disable-history --disable-multibyte --disable-progcomp --disable-readline --disable-mem-scramble
+	cd $(BASH_PATH) && ./configure --prefix=/ $(CROSS_COMPILE_FLAG) --without-bash-malloc --disable-debugger --disable-help-builtin --disable-history --disable-progcomp --disable-readline --disable-mem-scramble
 	$(MAKE) -C $(BASH_PATH)
 	$(STRIP) -s $@
 
 $(IPROUTE2_PATH)/.installed: $(IPROUTE2_TAR)
 	mkdir -p $(BUILD_PATH)
 	flock -s $<.lock tar -C $(BUILD_PATH) -xf $<
-	printf 'CC:=$(CC)\nPKG_CONFIG:=pkg-config\nTC_CONFIG_XT:=n\nTC_CONFIG_ATM:=n\nTC_CONFIG_IPSET:=n\nIP_CONFIG_SETNS:=y\nHAVE_ELF:=n\nHAVE_MNL:=n\nHAVE_BERKELEY_DB:=n\nHAVE_LATEX:=n\nHAVE_PDFLATEX:=n\nCFLAGS+=-DHAVE_SETNS\n' > $(IPROUTE2_PATH)/config.mk
-	printf 'lib: snapshot\n\t$$(MAKE) -C lib\nip/ip: lib\n\t$$(MAKE) -C ip ip\nmisc/ss: lib\n\t$$(MAKE) -C misc ss\n' >> $(IPROUTE2_PATH)/Makefile
+	printf 'CC:=$(CC)\nPKG_CONFIG:=pkg-config\nTC_CONFIG_XT:=n\nTC_CONFIG_ATM:=n\nTC_CONFIG_IPSET:=n\nIP_CONFIG_SETNS:=y\nHAVE_ELF:=n\nHAVE_MNL:=n\nHAVE_BERKELEY_DB:=n\nHAVE_LATEX:=n\nHAVE_PDFLATEX:=n\nCFLAGS+=-DHAVE_SETNS -DHAVE_HANDLE_AT\n' > $(IPROUTE2_PATH)/config.mk
+	printf 'libutil.a.done:\n\tflock -x $$@.lock $$(MAKE) -C lib\n\ttouch $$@\nip/ip: libutil.a.done\n\t$$(MAKE) -C ip ip\nmisc/ss: libutil.a.done\n\t$$(MAKE) -C misc ss\n' >> $(IPROUTE2_PATH)/Makefile
 	touch $@
 
 $(IPROUTE2_PATH)/ip/ip: | $(IPROUTE2_PATH)/.installed $(USERSPACE_DEPS)
-- 
2.35.1


^ permalink raw reply related	[flat|nested] 7+ messages in thread
* [PATCH net 6/6] wireguard: selftests: set panic_on_warn=1 from cmdline
  2022-05-04 20:29 [PATCH net 0/6] wireguard patches for 5.18-rc6 Jason A. Donenfeld
                   ` (4 preceding siblings ...)
  2022-05-04 20:29 ` [PATCH net 5/6] wireguard: selftests: bump package deps Jason A. Donenfeld
@ 2022-05-04 20:29 ` Jason A. Donenfeld
  5 siblings, 0 replies; 7+ messages in thread
From: Jason A. Donenfeld @ 2022-05-04 20:29 UTC (permalink / raw)
  To: netdev, kuba; +Cc: Jason A. Donenfeld

Rather than setting this once init is running, set panic_on_warn from
the kernel command line, so that it catches splats from WireGuard
initialization code and the various crypto selftests.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
---
 tools/testing/selftests/wireguard/qemu/arch/aarch64.config  | 2 +-
 .../testing/selftests/wireguard/qemu/arch/aarch64_be.config | 2 +-
 tools/testing/selftests/wireguard/qemu/arch/arm.config      | 2 +-
 tools/testing/selftests/wireguard/qemu/arch/armeb.config    | 2 +-
 tools/testing/selftests/wireguard/qemu/arch/i686.config     | 2 +-
 tools/testing/selftests/wireguard/qemu/arch/m68k.config     | 2 +-
 tools/testing/selftests/wireguard/qemu/arch/mips.config     | 2 +-
 tools/testing/selftests/wireguard/qemu/arch/mips64.config   | 2 +-
 tools/testing/selftests/wireguard/qemu/arch/mips64el.config | 2 +-
 tools/testing/selftests/wireguard/qemu/arch/mipsel.config   | 2 +-
 tools/testing/selftests/wireguard/qemu/arch/powerpc.config  | 2 +-
 .../testing/selftests/wireguard/qemu/arch/powerpc64.config  | 2 +-
 .../selftests/wireguard/qemu/arch/powerpc64le.config        | 2 +-
 tools/testing/selftests/wireguard/qemu/arch/riscv32.config  | 2 +-
 tools/testing/selftests/wireguard/qemu/arch/riscv64.config  | 2 +-
 tools/testing/selftests/wireguard/qemu/arch/s390x.config    | 2 +-
 tools/testing/selftests/wireguard/qemu/arch/x86_64.config   | 2 +-
 tools/testing/selftests/wireguard/qemu/init.c               | 6 ------
 18 files changed, 17 insertions(+), 23 deletions(-)

diff --git a/tools/testing/selftests/wireguard/qemu/arch/aarch64.config b/tools/testing/selftests/wireguard/qemu/arch/aarch64.config
index e9ac41f6b3ae..09016880ce03 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/aarch64.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/aarch64.config
@@ -4,5 +4,5 @@ CONFIG_VIRTIO_MENU=y
 CONFIG_VIRTIO_MMIO=y
 CONFIG_VIRTIO_CONSOLE=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyAMA0 wg.success=vport0p1"
+CONFIG_CMDLINE="console=ttyAMA0 wg.success=vport0p1 panic_on_warn=1"
 CONFIG_FRAME_WARN=1280
diff --git a/tools/testing/selftests/wireguard/qemu/arch/aarch64_be.config b/tools/testing/selftests/wireguard/qemu/arch/aarch64_be.config
index 03609a203e8c..19ff66e4c602 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/aarch64_be.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/aarch64_be.config
@@ -5,5 +5,5 @@ CONFIG_VIRTIO_MENU=y
 CONFIG_VIRTIO_MMIO=y
 CONFIG_VIRTIO_CONSOLE=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyAMA0 wg.success=vport0p1"
+CONFIG_CMDLINE="console=ttyAMA0 wg.success=vport0p1 panic_on_warn=1"
 CONFIG_FRAME_WARN=1280
diff --git a/tools/testing/selftests/wireguard/qemu/arch/arm.config b/tools/testing/selftests/wireguard/qemu/arch/arm.config
index c616124fdd59..fc7959bef9c2 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/arm.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/arm.config
@@ -8,5 +8,5 @@ CONFIG_VIRTIO_MENU=y
 CONFIG_VIRTIO_MMIO=y
 CONFIG_VIRTIO_CONSOLE=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyAMA0 wg.success=vport0p1"
+CONFIG_CMDLINE="console=ttyAMA0 wg.success=vport0p1 panic_on_warn=1"
 CONFIG_FRAME_WARN=1024
diff --git a/tools/testing/selftests/wireguard/qemu/arch/armeb.config b/tools/testing/selftests/wireguard/qemu/arch/armeb.config
index d3a40a974e16..f3066be81c19 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/armeb.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/armeb.config
@@ -8,6 +8,6 @@ CONFIG_VIRTIO_MENU=y
 CONFIG_VIRTIO_MMIO=y
 CONFIG_VIRTIO_CONSOLE=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyAMA0 wg.success=vport0p1"
+CONFIG_CMDLINE="console=ttyAMA0 wg.success=vport0p1 panic_on_warn=1"
 CONFIG_CPU_BIG_ENDIAN=y
 CONFIG_FRAME_WARN=1024
diff --git a/tools/testing/selftests/wireguard/qemu/arch/i686.config b/tools/testing/selftests/wireguard/qemu/arch/i686.config
index a9b4fe795048..6d90892a85a2 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/i686.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/i686.config
@@ -2,5 +2,5 @@ CONFIG_ACPI=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1"
+CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1"
 CONFIG_FRAME_WARN=1024
diff --git a/tools/testing/selftests/wireguard/qemu/arch/m68k.config b/tools/testing/selftests/wireguard/qemu/arch/m68k.config
index 62a15bdb877e..82c925e49beb 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/m68k.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/m68k.config
@@ -5,5 +5,5 @@ CONFIG_MAC=y
 CONFIG_SERIAL_PMACZILOG=y
 CONFIG_SERIAL_PMACZILOG_TTYS=y
 CONFIG_SERIAL_PMACZILOG_CONSOLE=y
-CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1"
+CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1"
 CONFIG_FRAME_WARN=1024
diff --git a/tools/testing/selftests/wireguard/qemu/arch/mips.config b/tools/testing/selftests/wireguard/qemu/arch/mips.config
index df71d6b95546..d7ec63c17b30 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/mips.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/mips.config
@@ -7,5 +7,5 @@ CONFIG_POWER_RESET_SYSCON=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1"
+CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1"
 CONFIG_FRAME_WARN=1024
diff --git a/tools/testing/selftests/wireguard/qemu/arch/mips64.config b/tools/testing/selftests/wireguard/qemu/arch/mips64.config
index 90c783f725c4..0994947e3392 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/mips64.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/mips64.config
@@ -10,5 +10,5 @@ CONFIG_POWER_RESET_SYSCON=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1"
+CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1"
 CONFIG_FRAME_WARN=1280
diff --git a/tools/testing/selftests/wireguard/qemu/arch/mips64el.config b/tools/testing/selftests/wireguard/qemu/arch/mips64el.config
index 435b0b43e00c..591184342f47 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/mips64el.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/mips64el.config
@@ -11,5 +11,5 @@ CONFIG_POWER_RESET_SYSCON=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1"
+CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1"
 CONFIG_FRAME_WARN=1280
diff --git a/tools/testing/selftests/wireguard/qemu/arch/mipsel.config b/tools/testing/selftests/wireguard/qemu/arch/mipsel.config
index 62bb50c4a85f..18a498293737 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/mipsel.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/mipsel.config
@@ -8,5 +8,5 @@ CONFIG_POWER_RESET_SYSCON=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1"
+CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1"
 CONFIG_FRAME_WARN=1024
diff --git a/tools/testing/selftests/wireguard/qemu/arch/powerpc.config b/tools/testing/selftests/wireguard/qemu/arch/powerpc.config
index 57957093b71b..5e04882e8e35 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/powerpc.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/powerpc.config
@@ -6,5 +6,5 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_MATH_EMULATION=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1"
+CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1"
 CONFIG_FRAME_WARN=1024
diff --git a/tools/testing/selftests/wireguard/qemu/arch/powerpc64.config b/tools/testing/selftests/wireguard/qemu/arch/powerpc64.config
index c19c7b519d8b..737194b7619e 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/powerpc64.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/powerpc64.config
@@ -7,7 +7,7 @@ CONFIG_PPC_RADIX_MMU=y
 CONFIG_HVC_CONSOLE=y
 CONFIG_CPU_BIG_ENDIAN=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=hvc0 wg.success=hvc1"
+CONFIG_CMDLINE="console=hvc0 wg.success=hvc1 panic_on_warn=1"
 CONFIG_SECTION_MISMATCH_WARN_ONLY=y
 CONFIG_FRAME_WARN=1280
 CONFIG_THREAD_SHIFT=14
diff --git a/tools/testing/selftests/wireguard/qemu/arch/powerpc64le.config b/tools/testing/selftests/wireguard/qemu/arch/powerpc64le.config
index f52f1e2bc7f6..8148b9d1220a 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/powerpc64le.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/powerpc64le.config
@@ -7,7 +7,7 @@ CONFIG_PPC_RADIX_MMU=y
 CONFIG_HVC_CONSOLE=y
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=hvc0 wg.success=hvc1"
+CONFIG_CMDLINE="console=hvc0 wg.success=hvc1 panic_on_warn=1"
 CONFIG_SECTION_MISMATCH_WARN_ONLY=y
 CONFIG_FRAME_WARN=1280
 CONFIG_THREAD_SHIFT=14
diff --git a/tools/testing/selftests/wireguard/qemu/arch/riscv32.config b/tools/testing/selftests/wireguard/qemu/arch/riscv32.config
index ea53e78e923e..0bd0e72d95d4 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/riscv32.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/riscv32.config
@@ -8,5 +8,5 @@ CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_VIRTIO_MENU=y
 CONFIG_VIRTIO_MMIO=y
 CONFIG_VIRTIO_CONSOLE=y
-CONFIG_CMDLINE="console=ttyS0 wg.success=vport0p1"
+CONFIG_CMDLINE="console=ttyS0 wg.success=vport0p1 panic_on_warn=1"
 CONFIG_CMDLINE_FORCE=y
diff --git a/tools/testing/selftests/wireguard/qemu/arch/riscv64.config b/tools/testing/selftests/wireguard/qemu/arch/riscv64.config
index 4a08d8c1d4af..dc266f3b1915 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/riscv64.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/riscv64.config
@@ -8,5 +8,5 @@ CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_VIRTIO_MENU=y
 CONFIG_VIRTIO_MMIO=y
 CONFIG_VIRTIO_CONSOLE=y
-CONFIG_CMDLINE="console=ttyS0 wg.success=vport0p1"
+CONFIG_CMDLINE="console=ttyS0 wg.success=vport0p1 panic_on_warn=1"
 CONFIG_CMDLINE_FORCE=y
diff --git a/tools/testing/selftests/wireguard/qemu/arch/s390x.config b/tools/testing/selftests/wireguard/qemu/arch/s390x.config
index 274a44f4e49c..a7b44dca0b0a 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/s390x.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/s390x.config
@@ -3,4 +3,4 @@ CONFIG_SCLP_VT220_CONSOLE=y
 CONFIG_VIRTIO_MENU=y
 CONFIG_VIRTIO_CONSOLE=y
 CONFIG_S390_GUEST=y
-CONFIG_CMDLINE="console=ttysclp0 wg.success=vport0p1"
+CONFIG_CMDLINE="console=ttysclp0 wg.success=vport0p1 panic_on_warn=1"
diff --git a/tools/testing/selftests/wireguard/qemu/arch/x86_64.config b/tools/testing/selftests/wireguard/qemu/arch/x86_64.config
index 45dd53a0d760..efa00693e08b 100644
--- a/tools/testing/selftests/wireguard/qemu/arch/x86_64.config
+++ b/tools/testing/selftests/wireguard/qemu/arch/x86_64.config
@@ -2,5 +2,5 @@ CONFIG_ACPI=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1"
+CONFIG_CMDLINE="console=ttyS0 wg.success=ttyS1 panic_on_warn=1"
 CONFIG_FRAME_WARN=1280
diff --git a/tools/testing/selftests/wireguard/qemu/init.c b/tools/testing/selftests/wireguard/qemu/init.c
index 0b45055d9de0..2a0f48fac925 100644
--- a/tools/testing/selftests/wireguard/qemu/init.c
+++ b/tools/testing/selftests/wireguard/qemu/init.c
@@ -110,12 +110,6 @@ static void enable_logging(void)
 			panic("write(exception-trace)");
 		close(fd);
 	}
-	fd = open("/proc/sys/kernel/panic_on_warn", O_WRONLY);
-	if (fd >= 0) {
-		if (write(fd, "1\n", 2) != 2)
-			panic("write(panic_on_warn)");
-		close(fd);
-	}
 }
 
 static void kmod_selftests(void)
-- 
2.35.1


^ permalink raw reply related	[flat|nested] 7+ messages in thread
end of thread, other threads:[~2022-05-04 20:30 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-05-04 20:29 [PATCH net 0/6] wireguard patches for 5.18-rc6 Jason A. Donenfeld
2022-05-04 20:29 ` [PATCH net 1/6] wireguard: selftests: make routing loop test non-fatal Jason A. Donenfeld
2022-05-04 20:29 ` [PATCH net 2/6] wireguard: selftests: limit parallelism to $(nproc) tests at once Jason A. Donenfeld
2022-05-04 20:29 ` [PATCH net 3/6] wireguard: selftests: use newer toolchains to fill out architectures Jason A. Donenfeld
2022-05-04 20:29 ` [PATCH net 4/6] wireguard: selftests: restore support for ccache Jason A. Donenfeld
2022-05-04 20:29 ` [PATCH net 5/6] wireguard: selftests: bump package deps Jason A. Donenfeld
2022-05-04 20:29 ` [PATCH net 6/6] wireguard: selftests: set panic_on_warn=1 from cmdline Jason A. Donenfeld

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.