All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Jingoo Han <jingoohan1@gmail.com>,
	Gustavo Pimentel <gustavo.pimentel@synopsys.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	Stanimir Varbanov <svarbanov@mm-sol.com>,
	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Vinod Koul <vkoul@kernel.org>,
	linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org,
	devicetree@vger.kernel.org
Subject: [PATCH v7 4/7] PCI: dwc: Export several functions useful for MSI implentations
Date: Thu,  5 May 2022 16:54:04 +0300	[thread overview]
Message-ID: <20220505135407.1352382-5-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20220505135407.1352382-1-dmitry.baryshkov@linaro.org>

Supporting multiple MSI interrupts on Qualcomm hardware would benefit
from having these functions being exported rather than static. Note that
both designware and qcom driver can not be built as modules, so no need
to use EXPORT_SYMBOL here.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 .../pci/controller/dwc/pcie-designware-host.c | 62 ++++++++++++-------
 drivers/pci/controller/dwc/pcie-designware.h  | 11 ++++
 2 files changed, 49 insertions(+), 24 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index 92dcaeabe2bf..b09b7244a558 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -255,7 +255,39 @@ int dw_pcie_allocate_domains(struct pcie_port *pp)
 	return 0;
 }
 
-static void dw_pcie_free_msi(struct pcie_port *pp)
+int dw_pcie_allocate_msi(struct pcie_port *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	int ret;
+
+	ret = dw_pcie_allocate_domains(pp);
+	if (ret)
+		return ret;
+
+	if (pp->msi_irq > 0)
+		irq_set_chained_handler_and_data(pp->msi_irq,
+						 dw_chained_msi_isr,
+						 pp);
+
+	ret = dma_set_mask(pci->dev, DMA_BIT_MASK(32));
+	if (ret)
+		dev_warn(pci->dev, "Failed to set DMA mask to 32-bit. Devices with only 32-bit MSI support may not work properly\n");
+
+	pp->msi_data = dma_map_single_attrs(pci->dev, &pp->msi_msg,
+					    sizeof(pp->msi_msg),
+					    DMA_FROM_DEVICE,
+					    DMA_ATTR_SKIP_CPU_SYNC);
+	ret = dma_mapping_error(pci->dev, pp->msi_data);
+	if (ret) {
+		dev_err(pci->dev, "Failed to map MSI data\n");
+		pp->msi_data = 0;
+		return ret;
+	}
+
+	return 0;
+}
+
+void dw_pcie_free_msi(struct pcie_port *pp)
 {
 	if (pp->msi_irq > 0)
 		irq_set_chained_handler_and_data(pp->msi_irq, NULL, NULL);
@@ -357,6 +389,9 @@ int dw_pcie_host_init(struct pcie_port *pp)
 			return -EINVAL;
 		}
 
+		/* this can be overridden by msi_host_init() if necessary */
+		pp->msi_irq_chip = &dw_pci_msi_bottom_irq_chip;
+
 		if (pp->ops->msi_host_init) {
 			ret = pp->ops->msi_host_init(pp);
 			if (ret < 0)
@@ -377,30 +412,9 @@ int dw_pcie_host_init(struct pcie_port *pp)
 				}
 			}
 
-			pp->msi_irq_chip = &dw_pci_msi_bottom_irq_chip;
-
-			ret = dw_pcie_allocate_domains(pp);
-			if (ret)
+			ret = dw_pcie_allocate_msi(pp);
+			if (ret < 0)
 				return ret;
-
-			if (pp->msi_irq > 0)
-				irq_set_chained_handler_and_data(pp->msi_irq,
-							    dw_chained_msi_isr,
-							    pp);
-
-			ret = dma_set_mask(pci->dev, DMA_BIT_MASK(32));
-			if (ret)
-				dev_warn(pci->dev, "Failed to set DMA mask to 32-bit. Devices with only 32-bit MSI support may not work properly\n");
-
-			pp->msi_data = dma_map_single_attrs(pci->dev, &pp->msi_msg,
-						      sizeof(pp->msi_msg),
-						      DMA_FROM_DEVICE,
-						      DMA_ATTR_SKIP_CPU_SYNC);
-			if (dma_mapping_error(pci->dev, pp->msi_data)) {
-				dev_err(pci->dev, "Failed to map MSI data\n");
-				pp->msi_data = 0;
-				goto err_free_msi;
-			}
 		}
 	}
 
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index e1c48b71e0d2..f72447f15dc5 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -374,6 +374,8 @@ void dw_pcie_host_deinit(struct pcie_port *pp);
 int dw_pcie_allocate_domains(struct pcie_port *pp);
 void __iomem *dw_pcie_own_conf_map_bus(struct pci_bus *bus, unsigned int devfn,
 				       int where);
+int dw_pcie_allocate_msi(struct pcie_port *pp);
+void dw_pcie_free_msi(struct pcie_port *pp);
 #else
 static inline irqreturn_t dw_handle_msi_irq(struct pcie_port *pp)
 {
@@ -403,6 +405,15 @@ static inline void __iomem *dw_pcie_own_conf_map_bus(struct pci_bus *bus,
 {
 	return NULL;
 }
+
+static int dw_pcie_allocate_msi(struct pcie_port *pp)
+{
+	return -EINVAL;
+}
+
+static void dw_pcie_free_msi(struct pcie_port *pp)
+{
+}
 #endif
 
 #ifdef CONFIG_PCIE_DW_EP
-- 
2.35.1


  parent reply	other threads:[~2022-05-05 13:54 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-05 13:54 [PATCH v7 0/7] PCI: qcom: Fix higher MSI vectors handling Dmitry Baryshkov
2022-05-05 13:54 ` [PATCH v7 1/7] PCI: qcom: Revert "PCI: qcom: Add support for handling MSIs from 8 endpoints" Dmitry Baryshkov
2022-05-05 20:12   ` Rob Herring
2022-05-05 13:54 ` [PATCH v7 2/7] PCI: dwc: Correct msi_irq condition in dw_pcie_free_msi() Dmitry Baryshkov
2022-05-05 20:11   ` Rob Herring
2022-05-05 13:54 ` [PATCH v7 3/7] PCI: dwc: Add msi_host_deinit callback Dmitry Baryshkov
2022-05-05 13:54 ` Dmitry Baryshkov [this message]
2022-05-05 13:54 ` [PATCH v7 5/7] PCI: qcom: Handle MSIs routed to multiple GIC interrupts Dmitry Baryshkov
2022-05-05 21:26   ` Rob Herring
2022-05-06  7:40     ` Dmitry Baryshkov
2022-05-09 21:00       ` Rob Herring
2022-05-05 13:54 ` [PATCH v7 6/7] dt-bindings: PCI: qcom: Support additional MSI interrupts Dmitry Baryshkov
2022-05-05 21:30   ` Rob Herring
2022-05-11 14:50     ` Dmitry Baryshkov
2022-05-05 13:54 ` [PATCH v7 7/7] arm64: dts: qcom: sm8250: provide " Dmitry Baryshkov
2022-05-05 15:37 ` [PATCH v7 0/7] PCI: qcom: Fix higher MSI vectors handling Stanimir Varbanov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220505135407.1352382-5-dmitry.baryshkov@linaro.org \
    --to=dmitry.baryshkov@linaro.org \
    --cc=agross@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=jingoohan1@gmail.com \
    --cc=krzk@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=robh+dt@kernel.org \
    --cc=svarbanov@mm-sol.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.