From: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
To: Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Mark Brown <broonie@kernel.org>
Cc: <alsa-devel@alsa-project.org>, <patches@opensource.cirrus.com>,
<linux-kernel@vger.kernel.org>,
Stefan Binding <sbinding@opensource.cirrus.com>
Subject: [PATCH v2 05/26] ALSA: hda: cs35l41: Enable GPIO2 Interrupt for CLSA0100 laptops
Date: Mon, 9 May 2022 22:46:42 +0100 [thread overview]
Message-ID: <20220509214703.4482-6-vitalyr@opensource.cirrus.com> (raw)
In-Reply-To: <20220509214703.4482-1-vitalyr@opensource.cirrus.com>
From: Stefan Binding <sbinding@opensource.cirrus.com>
CLSA0100 Laptop does not contain configuration inside ACPI,
instead the hardware configuration needs to be hardcoded.
Hardcode GPIO2 Interrupt in the driver for CSLA0100.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
---
sound/pci/hda/cs35l41_hda.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/sound/pci/hda/cs35l41_hda.c b/sound/pci/hda/cs35l41_hda.c
index bd52e0c2c772..2608bf4a6851 100644
--- a/sound/pci/hda/cs35l41_hda.c
+++ b/sound/pci/hda/cs35l41_hda.c
@@ -412,6 +412,8 @@ static int cs35l41_hda_read_acpi(struct cs35l41_hda *cs35l41, const char *hid, i
cs35l41->hw_cfg.spk_pos = cs35l41->index;
cs35l41->reset_gpio = gpiod_get_index(physdev, NULL, 0, GPIOD_OUT_HIGH);
cs35l41->hw_cfg.bst_type = CS35L41_EXT_BOOST_NO_VSPK_SWITCH;
+ hw_cfg->gpio2.func = CS35L41_GPIO2_INT_OPEN_DRAIN;
+ hw_cfg->gpio2.valid = true;
cs35l41->hw_cfg.valid = true;
put_device(physdev);
--
2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
To: Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Mark Brown <broonie@kernel.org>
Cc: patches@opensource.cirrus.com, alsa-devel@alsa-project.org,
linux-kernel@vger.kernel.org,
Stefan Binding <sbinding@opensource.cirrus.com>
Subject: [PATCH v2 05/26] ALSA: hda: cs35l41: Enable GPIO2 Interrupt for CLSA0100 laptops
Date: Mon, 9 May 2022 22:46:42 +0100 [thread overview]
Message-ID: <20220509214703.4482-6-vitalyr@opensource.cirrus.com> (raw)
In-Reply-To: <20220509214703.4482-1-vitalyr@opensource.cirrus.com>
From: Stefan Binding <sbinding@opensource.cirrus.com>
CLSA0100 Laptop does not contain configuration inside ACPI,
instead the hardware configuration needs to be hardcoded.
Hardcode GPIO2 Interrupt in the driver for CSLA0100.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
---
sound/pci/hda/cs35l41_hda.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/sound/pci/hda/cs35l41_hda.c b/sound/pci/hda/cs35l41_hda.c
index bd52e0c2c772..2608bf4a6851 100644
--- a/sound/pci/hda/cs35l41_hda.c
+++ b/sound/pci/hda/cs35l41_hda.c
@@ -412,6 +412,8 @@ static int cs35l41_hda_read_acpi(struct cs35l41_hda *cs35l41, const char *hid, i
cs35l41->hw_cfg.spk_pos = cs35l41->index;
cs35l41->reset_gpio = gpiod_get_index(physdev, NULL, 0, GPIOD_OUT_HIGH);
cs35l41->hw_cfg.bst_type = CS35L41_EXT_BOOST_NO_VSPK_SWITCH;
+ hw_cfg->gpio2.func = CS35L41_GPIO2_INT_OPEN_DRAIN;
+ hw_cfg->gpio2.valid = true;
cs35l41->hw_cfg.valid = true;
put_device(physdev);
--
2.34.1
next prev parent reply other threads:[~2022-05-09 21:47 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-09 21:46 [PATCH v2 00/26] *ALSA: hda: cirrus: Add initial DSP support and firmware loading Vitaly Rodionov
2022-05-09 21:46 ` Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 01/26] ALSA: hda: cs35l41: Fix error in spi cs35l41 hda driver name Vitaly Rodionov
2022-05-09 21:46 ` Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 02/26] ALSA: hda: cs35l41: Set Speaker Position for CLSA0100 Laptop Vitaly Rodionov
2022-05-09 21:46 ` Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 03/26] ALSA: hda: cs35l41: Remove Set Channel Map api from binding Vitaly Rodionov
2022-05-09 21:46 ` Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 04/26] ALSA: hda: cs35l41: Add Support for Interrupts Vitaly Rodionov
2022-05-09 21:46 ` Vitaly Rodionov
2022-05-09 21:46 ` Vitaly Rodionov [this message]
2022-05-09 21:46 ` [PATCH v2 05/26] ALSA: hda: cs35l41: Enable GPIO2 Interrupt for CLSA0100 laptops Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 06/26] ASoC: cs35l41: Move cs35l41_set_cspl_mbox_cmd to shared code Vitaly Rodionov
2022-05-09 21:46 ` Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 07/26] ASoC: cs35l41: Move cs35l41 fs errata into " Vitaly Rodionov
2022-05-09 21:46 ` Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 08/26] ASoC: cs35l41: Move cs_dsp config struct " Vitaly Rodionov
2022-05-09 21:46 ` Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 09/26] ALSA: hda: cs35l41: Add Amp Name based on channel and index Vitaly Rodionov
2022-05-09 21:46 ` Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 10/26] ALSA: hda: hda_cs_dsp_ctl: Add Library to support CS_DSP ALSA controls Vitaly Rodionov
2022-05-09 21:46 ` Vitaly Rodionov
2022-05-11 13:49 ` Takashi Iwai
2022-05-11 13:49 ` Takashi Iwai
2022-05-11 13:57 ` Charles Keepax
2022-05-11 13:57 ` Charles Keepax
2022-05-11 14:02 ` Charles Keepax
2022-05-11 14:02 ` Charles Keepax
2022-05-09 21:46 ` [PATCH v2 11/26] ALSA: hda: hda_cs_dsp_ctl: Add apis to write the controls directly Vitaly Rodionov
2022-05-09 21:46 ` Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 12/26] ALSA: hda: cs35l41: Save codec object inside component struct Vitaly Rodionov
2022-05-09 21:46 ` Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 13/26] ALSA: hda: cs35l41: Add initial DSP support and firmware loading Vitaly Rodionov
2022-05-09 21:46 ` Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 14/26] ALSA: hda: cs35l41: Save Subsystem ID inside CS35L41 Driver Vitaly Rodionov
2022-05-09 21:46 ` Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 15/26] ALSA: hda: cs35l41: Support reading subsystem id from ACPI Vitaly Rodionov
2022-05-09 21:46 ` Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 16/26] ALSA: hda: cs35l41: Support multiple load paths for firmware Vitaly Rodionov
2022-05-09 21:46 ` Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 17/26] ALSA: hda: cs35l41: Support Speaker ID for laptops Vitaly Rodionov
2022-05-09 21:46 ` Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 18/26] ASoC: cs35l41: Move cs35l41 exit hibernate function into shared code Vitaly Rodionov
2022-05-09 21:46 ` Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 19/26] ASoC: cs35l41: Do not print error when waking from hibernation Vitaly Rodionov
2022-05-09 21:46 ` Vitaly Rodionov
2022-05-10 8:54 ` Charles Keepax
2022-05-10 8:54 ` Charles Keepax
2022-05-09 21:46 ` [PATCH v2 20/26] ASoC: cs35l41: Add common cs35l41 enter hibernate function Vitaly Rodionov
2022-05-09 21:46 ` Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 21/26] ALSA: hda: cs35l41: Support Hibernation during Suspend Vitaly Rodionov
2022-05-09 21:46 ` Vitaly Rodionov
2022-05-09 21:46 ` [PATCH v2 22/26] ALSA: hda: cs35l41: Read Speaker Calibration data from UEFI variables Vitaly Rodionov
2022-05-09 21:46 ` Vitaly Rodionov
2022-05-11 13:57 ` Takashi Iwai
2022-05-11 13:57 ` Takashi Iwai
2022-05-09 21:47 ` [PATCH v2 23/26] ALSA: hda: hda_cs_dsp_ctl: Add fw id strings Vitaly Rodionov
2022-05-09 21:47 ` Vitaly Rodionov
2022-05-09 21:47 ` [PATCH v2 24/26] ALSA: hda: cs35l41: Add defaulted values into dsp bypass config sequence Vitaly Rodionov
2022-05-09 21:47 ` Vitaly Rodionov
2022-05-09 21:47 ` [PATCH v2 25/26] ALSA: hda: cs35l41: Support Firmware switching and reloading Vitaly Rodionov
2022-05-09 21:47 ` Vitaly Rodionov
2022-05-09 21:47 ` [PATCH v2 26/26] ALSA: hda: cs35l41: Add kernel config to disable firmware autoload Vitaly Rodionov
2022-05-09 21:47 ` Vitaly Rodionov
2022-05-11 13:59 ` Takashi Iwai
2022-05-11 13:59 ` Takashi Iwai
2022-05-16 7:58 ` [PATCH v2 00/26] *ALSA: hda: cirrus: Add initial DSP support and firmware loading Takashi Iwai
2022-05-16 7:58 ` Takashi Iwai
2022-06-07 10:54 ` (subset) " Mark Brown
2022-06-07 10:54 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220509214703.4482-6-vitalyr@opensource.cirrus.com \
--to=vitalyr@opensource.cirrus.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
--cc=perex@perex.cz \
--cc=sbinding@opensource.cirrus.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.