[PATCH AUTOSEL 5.15 01/19] hwmon: (f71882fg) Fix negative temperature

[PATCH AUTOSEL 5.15 01/19] hwmon: (f71882fg) Fix negative temperature

[Sasha Levin]

From: "Ji-Ze Hong (Peter Hong)" <hpeter@gmail.com>

[ Upstream commit 4aaaaf0f279836f06d3b9d0ffeec7a1e1a04ceef ]

All temperature of Fintek superio hwmonitor that using 1-byte reg will use
2's complement.

In show_temp()
	temp = data->temp[nr] * 1000;

When data->temp[nr] read as 255, it indicate -1C, but this code will report
255C to userspace. It'll be ok when change to:
	temp = ((s8)data->temp[nr]) * 1000;

Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
Link: https://lore.kernel.org/r/20220418090706.6339-1-hpeter+linux_kernel@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hwmon/f71882fg.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index 4dec793fd07d..94b35723ee7a 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -1577,8 +1577,9 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
 		temp *= 125;
 		if (sign)
 			temp -= 128000;
-	} else
-		temp = data->temp[nr] * 1000;
+	} else {
+		temp = ((s8)data->temp[nr]) * 1000;
+	}
 
 	return sprintf(buf, "%d\n", temp);
 }
-- 
2.35.1

[PATCH AUTOSEL 5.15 02/19] RDMA/irdma: Fix deadlock in irdma_cleanup_cm_core()

[Sasha Levin]

From: Duoming Zhou <duoming@zju.edu.cn>

[ Upstream commit 679ab61bf5f5f519377d812afb4fb93634782c74 ]

There is a deadlock in irdma_cleanup_cm_core(), which is shown below:

   (Thread 1)              |      (Thread 2)
                           | irdma_schedule_cm_timer()
irdma_cleanup_cm_core()    |  add_timer()
 spin_lock_irqsave() //(1) |  (wait a time)
 ...                       | irdma_cm_timer_tick()
 del_timer_sync()          |  spin_lock_irqsave() //(2)
 (wait timer to stop)      |  ...

We hold cm_core->ht_lock in position (1) of thread 1 and use
del_timer_sync() to wait timer to stop, but timer handler also need
cm_core->ht_lock in position (2) of thread 2.  As a result,
irdma_cleanup_cm_core() will block forever.

This patch removes the check of timer_pending() in
irdma_cleanup_cm_core(), because the del_timer_sync() function will just
return directly if there isn't a pending timer. As a result, the lock is
redundant, because there is no resource it could protect.

Link: https://lore.kernel.org/r/20220418153322.42524-1-duoming@zju.edu.cn
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/irdma/cm.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/drivers/infiniband/hw/irdma/cm.c b/drivers/infiniband/hw/irdma/cm.c
index 6dea0a49d171..41703c7ebca5 100644
--- a/drivers/infiniband/hw/irdma/cm.c
+++ b/drivers/infiniband/hw/irdma/cm.c
@@ -3244,15 +3244,10 @@ enum irdma_status_code irdma_setup_cm_core(struct irdma_device *iwdev,
  */
 void irdma_cleanup_cm_core(struct irdma_cm_core *cm_core)
 {
-	unsigned long flags;
-
 	if (!cm_core)
 		return;
 
-	spin_lock_irqsave(&cm_core->ht_lock, flags);
-	if (timer_pending(&cm_core->tcp_timer))
-		del_timer_sync(&cm_core->tcp_timer);
-	spin_unlock_irqrestore(&cm_core->ht_lock, flags);
+	del_timer_sync(&cm_core->tcp_timer);
 
 	destroy_workqueue(cm_core->event_wq);
 	cm_core->dev->ws_reset(&cm_core->iwdev->vsi);
-- 
2.35.1

[PATCH AUTOSEL 5.15 03/19] iommu: arm-smmu: disable large page mappings for Nvidia arm-smmu

[Sasha Levin]

From: Ashish Mhetre <amhetre@nvidia.com>

[ Upstream commit 4a25f2ea0e030b2fc852c4059a50181bfc5b2f57 ]

Tegra194 and Tegra234 SoCs have the erratum that causes walk cache
entries to not be invalidated correctly. The problem is that the walk
cache index generated for IOVA is not same across translation and
invalidation requests. This is leading to page faults when PMD entry is
released during unmap and populated with new PTE table during subsequent
map request. Disabling large page mappings avoids the release of PMD
entry and avoid translations seeing stale PMD entry in walk cache.
Fix this by limiting the page mappings to PAGE_SIZE for Tegra194 and
Tegra234 devices. This is recommended fix from Tegra hardware design
team.

Acked-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Krishna Reddy <vdumpa@nvidia.com>
Co-developed-by: Pritesh Raithatha <praithatha@nvidia.com>
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
Link: https://lore.kernel.org/r/20220421081504.24678-1-amhetre@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/arm/arm-smmu/arm-smmu-nvidia.c | 30 ++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-nvidia.c b/drivers/iommu/arm/arm-smmu/arm-smmu-nvidia.c
index 01e9b50b10a1..87bf522b9d2e 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-nvidia.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-nvidia.c
@@ -258,6 +258,34 @@ static void nvidia_smmu_probe_finalize(struct arm_smmu_device *smmu, struct devi
 			dev_name(dev), err);
 }
 
+static int nvidia_smmu_init_context(struct arm_smmu_domain *smmu_domain,
+				    struct io_pgtable_cfg *pgtbl_cfg,
+				    struct device *dev)
+{
+	struct arm_smmu_device *smmu = smmu_domain->smmu;
+	const struct device_node *np = smmu->dev->of_node;
+
+	/*
+	 * Tegra194 and Tegra234 SoCs have the erratum that causes walk cache
+	 * entries to not be invalidated correctly. The problem is that the walk
+	 * cache index generated for IOVA is not same across translation and
+	 * invalidation requests. This is leading to page faults when PMD entry
+	 * is released during unmap and populated with new PTE table during
+	 * subsequent map request. Disabling large page mappings avoids the
+	 * release of PMD entry and avoid translations seeing stale PMD entry in
+	 * walk cache.
+	 * Fix this by limiting the page mappings to PAGE_SIZE on Tegra194 and
+	 * Tegra234.
+	 */
+	if (of_device_is_compatible(np, "nvidia,tegra234-smmu") ||
+	    of_device_is_compatible(np, "nvidia,tegra194-smmu")) {
+		smmu->pgsize_bitmap = PAGE_SIZE;
+		pgtbl_cfg->pgsize_bitmap = smmu->pgsize_bitmap;
+	}
+
+	return 0;
+}
+
 static const struct arm_smmu_impl nvidia_smmu_impl = {
 	.read_reg = nvidia_smmu_read_reg,
 	.write_reg = nvidia_smmu_write_reg,
@@ -268,10 +296,12 @@ static const struct arm_smmu_impl nvidia_smmu_impl = {
 	.global_fault = nvidia_smmu_global_fault,
 	.context_fault = nvidia_smmu_context_fault,
 	.probe_finalize = nvidia_smmu_probe_finalize,
+	.init_context = nvidia_smmu_init_context,
 };
 
 static const struct arm_smmu_impl nvidia_smmu_single_impl = {
 	.probe_finalize = nvidia_smmu_probe_finalize,
+	.init_context = nvidia_smmu_init_context,
 };
 
 struct arm_smmu_device *nvidia_smmu_impl_init(struct arm_smmu_device *smmu)
-- 
2.35.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCH AUTOSEL 5.15 03/19] iommu: arm-smmu: disable large page mappings for Nvidia arm-smmu

[Sasha Levin]

From: Ashish Mhetre <amhetre@nvidia.com>

[ Upstream commit 4a25f2ea0e030b2fc852c4059a50181bfc5b2f57 ]

Tegra194 and Tegra234 SoCs have the erratum that causes walk cache
entries to not be invalidated correctly. The problem is that the walk
cache index generated for IOVA is not same across translation and
invalidation requests. This is leading to page faults when PMD entry is
released during unmap and populated with new PTE table during subsequent
map request. Disabling large page mappings avoids the release of PMD
entry and avoid translations seeing stale PMD entry in walk cache.
Fix this by limiting the page mappings to PAGE_SIZE for Tegra194 and
Tegra234 devices. This is recommended fix from Tegra hardware design
team.

Acked-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Krishna Reddy <vdumpa@nvidia.com>
Co-developed-by: Pritesh Raithatha <praithatha@nvidia.com>
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
Link: https://lore.kernel.org/r/20220421081504.24678-1-amhetre@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/arm/arm-smmu/arm-smmu-nvidia.c | 30 ++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-nvidia.c b/drivers/iommu/arm/arm-smmu/arm-smmu-nvidia.c
index 01e9b50b10a1..87bf522b9d2e 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-nvidia.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-nvidia.c
@@ -258,6 +258,34 @@ static void nvidia_smmu_probe_finalize(struct arm_smmu_device *smmu, struct devi
 			dev_name(dev), err);
 }
 
+static int nvidia_smmu_init_context(struct arm_smmu_domain *smmu_domain,
+				    struct io_pgtable_cfg *pgtbl_cfg,
+				    struct device *dev)
+{
+	struct arm_smmu_device *smmu = smmu_domain->smmu;
+	const struct device_node *np = smmu->dev->of_node;
+
+	/*
+	 * Tegra194 and Tegra234 SoCs have the erratum that causes walk cache
+	 * entries to not be invalidated correctly. The problem is that the walk
+	 * cache index generated for IOVA is not same across translation and
+	 * invalidation requests. This is leading to page faults when PMD entry
+	 * is released during unmap and populated with new PTE table during
+	 * subsequent map request. Disabling large page mappings avoids the
+	 * release of PMD entry and avoid translations seeing stale PMD entry in
+	 * walk cache.
+	 * Fix this by limiting the page mappings to PAGE_SIZE on Tegra194 and
+	 * Tegra234.
+	 */
+	if (of_device_is_compatible(np, "nvidia,tegra234-smmu") ||
+	    of_device_is_compatible(np, "nvidia,tegra194-smmu")) {
+		smmu->pgsize_bitmap = PAGE_SIZE;
+		pgtbl_cfg->pgsize_bitmap = smmu->pgsize_bitmap;
+	}
+
+	return 0;
+}
+
 static const struct arm_smmu_impl nvidia_smmu_impl = {
 	.read_reg = nvidia_smmu_read_reg,
 	.write_reg = nvidia_smmu_write_reg,
@@ -268,10 +296,12 @@ static const struct arm_smmu_impl nvidia_smmu_impl = {
 	.global_fault = nvidia_smmu_global_fault,
 	.context_fault = nvidia_smmu_context_fault,
 	.probe_finalize = nvidia_smmu_probe_finalize,
+	.init_context = nvidia_smmu_init_context,
 };
 
 static const struct arm_smmu_impl nvidia_smmu_single_impl = {
 	.probe_finalize = nvidia_smmu_probe_finalize,
+	.init_context = nvidia_smmu_init_context,
 };
 
 struct arm_smmu_device *nvidia_smmu_impl_init(struct arm_smmu_device *smmu)
-- 
2.35.1

[PATCH AUTOSEL 5.15 03/19] iommu: arm-smmu: disable large page mappings for Nvidia arm-smmu

[Sasha Levin]

From: Ashish Mhetre <amhetre@nvidia.com>

[ Upstream commit 4a25f2ea0e030b2fc852c4059a50181bfc5b2f57 ]

Tegra194 and Tegra234 SoCs have the erratum that causes walk cache
entries to not be invalidated correctly. The problem is that the walk
cache index generated for IOVA is not same across translation and
invalidation requests. This is leading to page faults when PMD entry is
released during unmap and populated with new PTE table during subsequent
map request. Disabling large page mappings avoids the release of PMD
entry and avoid translations seeing stale PMD entry in walk cache.
Fix this by limiting the page mappings to PAGE_SIZE for Tegra194 and
Tegra234 devices. This is recommended fix from Tegra hardware design
team.

Acked-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Krishna Reddy <vdumpa@nvidia.com>
Co-developed-by: Pritesh Raithatha <praithatha@nvidia.com>
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
Link: https://lore.kernel.org/r/20220421081504.24678-1-amhetre@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/arm/arm-smmu/arm-smmu-nvidia.c | 30 ++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-nvidia.c b/drivers/iommu/arm/arm-smmu/arm-smmu-nvidia.c
index 01e9b50b10a1..87bf522b9d2e 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-nvidia.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-nvidia.c
@@ -258,6 +258,34 @@ static void nvidia_smmu_probe_finalize(struct arm_smmu_device *smmu, struct devi
 			dev_name(dev), err);
 }
 
+static int nvidia_smmu_init_context(struct arm_smmu_domain *smmu_domain,
+				    struct io_pgtable_cfg *pgtbl_cfg,
+				    struct device *dev)
+{
+	struct arm_smmu_device *smmu = smmu_domain->smmu;
+	const struct device_node *np = smmu->dev->of_node;
+
+	/*
+	 * Tegra194 and Tegra234 SoCs have the erratum that causes walk cache
+	 * entries to not be invalidated correctly. The problem is that the walk
+	 * cache index generated for IOVA is not same across translation and
+	 * invalidation requests. This is leading to page faults when PMD entry
+	 * is released during unmap and populated with new PTE table during
+	 * subsequent map request. Disabling large page mappings avoids the
+	 * release of PMD entry and avoid translations seeing stale PMD entry in
+	 * walk cache.
+	 * Fix this by limiting the page mappings to PAGE_SIZE on Tegra194 and
+	 * Tegra234.
+	 */
+	if (of_device_is_compatible(np, "nvidia,tegra234-smmu") ||
+	    of_device_is_compatible(np, "nvidia,tegra194-smmu")) {
+		smmu->pgsize_bitmap = PAGE_SIZE;
+		pgtbl_cfg->pgsize_bitmap = smmu->pgsize_bitmap;
+	}
+
+	return 0;
+}
+
 static const struct arm_smmu_impl nvidia_smmu_impl = {
 	.read_reg = nvidia_smmu_read_reg,
 	.write_reg = nvidia_smmu_write_reg,
@@ -268,10 +296,12 @@ static const struct arm_smmu_impl nvidia_smmu_impl = {
 	.global_fault = nvidia_smmu_global_fault,
 	.context_fault = nvidia_smmu_context_fault,
 	.probe_finalize = nvidia_smmu_probe_finalize,
+	.init_context = nvidia_smmu_init_context,
 };
 
 static const struct arm_smmu_impl nvidia_smmu_single_impl = {
 	.probe_finalize = nvidia_smmu_probe_finalize,
+	.init_context = nvidia_smmu_init_context,
 };
 
 struct arm_smmu_device *nvidia_smmu_impl_init(struct arm_smmu_device *smmu)
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.15 04/19] ASoC: max98090: Reject invalid values in custom control put()

[Sasha Levin]

From: Mark Brown <broonie@kernel.org>

[ Upstream commit 2fbe467bcbfc760a08f08475eea6bbd4c2874319 ]

The max98090 driver has a custom put function for some controls which can
only be updated in certain circumstances which makes no effort to validate
that input is suitable for the control, allowing out of spec values to be
written to the hardware and presented to userspace. Fix this by returning
an error when invalid values are written.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220420193454.2647908-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/max98090.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c
index b45ec35cd63c..6d9261346842 100644
--- a/sound/soc/codecs/max98090.c
+++ b/sound/soc/codecs/max98090.c
@@ -413,6 +413,9 @@ static int max98090_put_enab_tlv(struct snd_kcontrol *kcontrol,
 
 	val = (val >> mc->shift) & mask;
 
+	if (sel < 0 || sel > mc->max)
+		return -EINVAL;
+
 	*select = sel;
 
 	/* Setting a volume is only valid if it is already On */
-- 
2.35.1

[PATCH AUTOSEL 5.15 04/19] ASoC: max98090: Reject invalid values in custom control put()

[Sasha Levin]

From: Mark Brown <broonie@kernel.org>

[ Upstream commit 2fbe467bcbfc760a08f08475eea6bbd4c2874319 ]

The max98090 driver has a custom put function for some controls which can
only be updated in certain circumstances which makes no effort to validate
that input is suitable for the control, allowing out of spec values to be
written to the hardware and presented to userspace. Fix this by returning
an error when invalid values are written.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220420193454.2647908-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/max98090.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c
index b45ec35cd63c..6d9261346842 100644
--- a/sound/soc/codecs/max98090.c
+++ b/sound/soc/codecs/max98090.c
@@ -413,6 +413,9 @@ static int max98090_put_enab_tlv(struct snd_kcontrol *kcontrol,
 
 	val = (val >> mc->shift) & mask;
 
+	if (sel < 0 || sel > mc->max)
+		return -EINVAL;
+
 	*select = sel;
 
 	/* Setting a volume is only valid if it is already On */
-- 
2.35.1

[PATCH AUTOSEL 5.15 05/19] ASoC: max98090: Generate notifications on changes for custom control

[Sasha Levin]

From: Mark Brown <broonie@kernel.org>

[ Upstream commit 13fcf676d9e102594effc686d98521ff5c90b925 ]

The max98090 driver has some custom controls which share a put() function
which returns 0 unconditionally, meaning that events are not generated
when the value changes. Fix that.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220420193454.2647908-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/max98090.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c
index 6d9261346842..62b41ca050a2 100644
--- a/sound/soc/codecs/max98090.c
+++ b/sound/soc/codecs/max98090.c
@@ -430,7 +430,7 @@ static int max98090_put_enab_tlv(struct snd_kcontrol *kcontrol,
 		mask << mc->shift,
 		sel << mc->shift);
 
-	return 0;
+	return *select != val;
 }
 
 static const char *max98090_perf_pwr_text[] =
-- 
2.35.1

[PATCH AUTOSEL 5.15 05/19] ASoC: max98090: Generate notifications on changes for custom control

[Sasha Levin]

From: Mark Brown <broonie@kernel.org>

[ Upstream commit 13fcf676d9e102594effc686d98521ff5c90b925 ]

The max98090 driver has some custom controls which share a put() function
which returns 0 unconditionally, meaning that events are not generated
when the value changes. Fix that.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220420193454.2647908-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/max98090.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c
index 6d9261346842..62b41ca050a2 100644
--- a/sound/soc/codecs/max98090.c
+++ b/sound/soc/codecs/max98090.c
@@ -430,7 +430,7 @@ static int max98090_put_enab_tlv(struct snd_kcontrol *kcontrol,
 		mask << mc->shift,
 		sel << mc->shift);
 
-	return 0;
+	return *select != val;
 }
 
 static const char *max98090_perf_pwr_text[] =
-- 
2.35.1

[PATCH AUTOSEL 5.15 06/19] ASoC: ops: Validate input values in snd_soc_put_volsw_range()

[Sasha Levin]

From: Mark Brown <broonie@kernel.org>

[ Upstream commit aa22125c57f9e577f0a667e4fa07fc3fa8ca1e60 ]

Check that values written via snd_soc_put_volsw_range() are
within the range advertised by the control, ensuring that we
don't write out of spec values to the hardware.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220423131239.3375261-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-ops.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/sound/soc/soc-ops.c b/sound/soc/soc-ops.c
index ee3782ecd7e3..bd88e56cacac 100644
--- a/sound/soc/soc-ops.c
+++ b/sound/soc/soc-ops.c
@@ -519,7 +519,15 @@ int snd_soc_put_volsw_range(struct snd_kcontrol *kcontrol,
 	unsigned int mask = (1 << fls(max)) - 1;
 	unsigned int invert = mc->invert;
 	unsigned int val, val_mask;
-	int err, ret;
+	int err, ret, tmp;
+
+	tmp = ucontrol->value.integer.value[0];
+	if (tmp < 0)
+		return -EINVAL;
+	if (mc->platform_max && tmp > mc->platform_max)
+		return -EINVAL;
+	if (tmp > mc->max - mc->min + 1)
+		return -EINVAL;
 
 	if (invert)
 		val = (max - ucontrol->value.integer.value[0]) & mask;
@@ -534,6 +542,14 @@ int snd_soc_put_volsw_range(struct snd_kcontrol *kcontrol,
 	ret = err;
 
 	if (snd_soc_volsw_is_stereo(mc)) {
+		tmp = ucontrol->value.integer.value[1];
+		if (tmp < 0)
+			return -EINVAL;
+		if (mc->platform_max && tmp > mc->platform_max)
+			return -EINVAL;
+		if (tmp > mc->max - mc->min + 1)
+			return -EINVAL;
+
 		if (invert)
 			val = (max - ucontrol->value.integer.value[1]) & mask;
 		else
-- 
2.35.1

[PATCH AUTOSEL 5.15 06/19] ASoC: ops: Validate input values in snd_soc_put_volsw_range()

[Sasha Levin]

From: Mark Brown <broonie@kernel.org>

[ Upstream commit aa22125c57f9e577f0a667e4fa07fc3fa8ca1e60 ]

Check that values written via snd_soc_put_volsw_range() are
within the range advertised by the control, ensuring that we
don't write out of spec values to the hardware.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220423131239.3375261-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-ops.c | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/sound/soc/soc-ops.c b/sound/soc/soc-ops.c
index ee3782ecd7e3..bd88e56cacac 100644
--- a/sound/soc/soc-ops.c
+++ b/sound/soc/soc-ops.c
@@ -519,7 +519,15 @@ int snd_soc_put_volsw_range(struct snd_kcontrol *kcontrol,
 	unsigned int mask = (1 << fls(max)) - 1;
 	unsigned int invert = mc->invert;
 	unsigned int val, val_mask;
-	int err, ret;
+	int err, ret, tmp;
+
+	tmp = ucontrol->value.integer.value[0];
+	if (tmp < 0)
+		return -EINVAL;
+	if (mc->platform_max && tmp > mc->platform_max)
+		return -EINVAL;
+	if (tmp > mc->max - mc->min + 1)
+		return -EINVAL;
 
 	if (invert)
 		val = (max - ucontrol->value.integer.value[0]) & mask;
@@ -534,6 +542,14 @@ int snd_soc_put_volsw_range(struct snd_kcontrol *kcontrol,
 	ret = err;
 
 	if (snd_soc_volsw_is_stereo(mc)) {
+		tmp = ucontrol->value.integer.value[1];
+		if (tmp < 0)
+			return -EINVAL;
+		if (mc->platform_max && tmp > mc->platform_max)
+			return -EINVAL;
+		if (tmp > mc->max - mc->min + 1)
+			return -EINVAL;
+
 		if (invert)
 			val = (max - ucontrol->value.integer.value[1]) & mask;
 		else
-- 
2.35.1

[PATCH AUTOSEL 5.15 07/19] s390: disable -Warray-bounds

[Sasha Levin]

From: Sven Schnelle <svens@linux.ibm.com>

[ Upstream commit 8b202ee218395319aec1ef44f72043e1fbaccdd6 ]

gcc-12 shows a lot of array bound warnings on s390. This is caused
by the S390_lowcore macro which uses a hardcoded address of 0.

Wrapping that with absolute_pointer() works, but gcc no longer knows
that a 12 bit displacement is sufficient to access lowcore. So it
emits instructions like 'lghi %r1,0; l %rx,xxx(%r1)' instead of a
single load/store instruction. As s390 stores variables often
read/written in lowcore, this is considered problematic. Therefore
disable -Warray-bounds on s390 for gcc-12 for the time being, until
there is a better solution.

Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Link: https://lore.kernel.org/r/yt9dzgkelelc.fsf@linux.ibm.com
Link: https://lore.kernel.org/r/20220422134308.1613610-1-svens@linux.ibm.com
Link: https://lore.kernel.org/r/20220425121742.3222133-1-svens@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/Makefile | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/s390/Makefile b/arch/s390/Makefile
index d4fd1426a822..c7b7a60f6405 100644
--- a/arch/s390/Makefile
+++ b/arch/s390/Makefile
@@ -32,6 +32,16 @@ KBUILD_CFLAGS_DECOMPRESSOR += -fno-stack-protector
 KBUILD_CFLAGS_DECOMPRESSOR += $(call cc-disable-warning, address-of-packed-member)
 KBUILD_CFLAGS_DECOMPRESSOR += $(if $(CONFIG_DEBUG_INFO),-g)
 KBUILD_CFLAGS_DECOMPRESSOR += $(if $(CONFIG_DEBUG_INFO_DWARF4), $(call cc-option, -gdwarf-4,))
+
+ifdef CONFIG_CC_IS_GCC
+	ifeq ($(call cc-ifversion, -ge, 1200, y), y)
+		ifeq ($(call cc-ifversion, -lt, 1300, y), y)
+			KBUILD_CFLAGS += $(call cc-disable-warning, array-bounds)
+			KBUILD_CFLAGS_DECOMPRESSOR += $(call cc-disable-warning, array-bounds)
+		endif
+	endif
+endif
+
 UTS_MACHINE	:= s390x
 STACK_SIZE	:= $(if $(CONFIG_KASAN),65536,16384)
 CHECKFLAGS	+= -D__s390__ -D__s390x__
-- 
2.35.1

[PATCH AUTOSEL 5.15 08/19] ASoC: SOF: Fix NULL pointer exception in sof_pci_probe callback

[Sasha Levin]

From: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>

[ Upstream commit c61711c1c95791850be48dd65a1d72eb34ba719f ]

We are accessing "desc->ops" in sof_pci_probe without checking "desc"
pointer. This results in NULL pointer exception if pci_id->driver_data
i.e desc pointer isn't defined in sof device probe:

BUG: kernel NULL pointer dereference, address: 0000000000000060
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:sof_pci_probe+0x1e/0x17f [snd_sof_pci]
Code: Unable to access opcode bytes at RIP 0xffffffffc043dff4.
RSP: 0018:ffffac4b03b9b8d8 EFLAGS: 00010246

Add NULL pointer check for sof_dev_desc pointer to avoid such exception.

Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220426183357.102155-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sof/sof-pci-dev.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/sound/soc/sof/sof-pci-dev.c b/sound/soc/sof/sof-pci-dev.c
index bc9e70765678..b773289c928d 100644
--- a/sound/soc/sof/sof-pci-dev.c
+++ b/sound/soc/sof/sof-pci-dev.c
@@ -129,6 +129,11 @@ int sof_pci_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
 
 	dev_dbg(&pci->dev, "PCI DSP detected");
 
+	if (!desc) {
+		dev_err(dev, "error: no matching PCI descriptor\n");
+		return -ENODEV;
+	}
+
 	if (!desc->ops) {
 		dev_err(dev, "error: no matching PCI descriptor ops\n");
 		return -ENODEV;
-- 
2.35.1

[PATCH AUTOSEL 5.15 08/19] ASoC: SOF: Fix NULL pointer exception in sof_pci_probe callback

[Sasha Levin]

From: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>

[ Upstream commit c61711c1c95791850be48dd65a1d72eb34ba719f ]

We are accessing "desc->ops" in sof_pci_probe without checking "desc"
pointer. This results in NULL pointer exception if pci_id->driver_data
i.e desc pointer isn't defined in sof device probe:

BUG: kernel NULL pointer dereference, address: 0000000000000060
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:sof_pci_probe+0x1e/0x17f [snd_sof_pci]
Code: Unable to access opcode bytes at RIP 0xffffffffc043dff4.
RSP: 0018:ffffac4b03b9b8d8 EFLAGS: 00010246

Add NULL pointer check for sof_dev_desc pointer to avoid such exception.

Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220426183357.102155-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sof/sof-pci-dev.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/sound/soc/sof/sof-pci-dev.c b/sound/soc/sof/sof-pci-dev.c
index bc9e70765678..b773289c928d 100644
--- a/sound/soc/sof/sof-pci-dev.c
+++ b/sound/soc/sof/sof-pci-dev.c
@@ -129,6 +129,11 @@ int sof_pci_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
 
 	dev_dbg(&pci->dev, "PCI DSP detected");
 
+	if (!desc) {
+		dev_err(dev, "error: no matching PCI descriptor\n");
+		return -ENODEV;
+	}
+
 	if (!desc->ops) {
 		dev_err(dev, "error: no matching PCI descriptor ops\n");
 		return -ENODEV;
-- 
2.35.1

[PATCH AUTOSEL 5.15 09/19] io_uring: assign non-fixed early for async work

[Sasha Levin]

From: Jens Axboe <axboe@kernel.dk>

[ Upstream commit a196c78b5443fc61af2c0490213b9d125482cbd1 ]

We defer file assignment to ensure that fixed files work with links
between a direct accept/open and the links that follow it. But this has
the side effect that normal file assignment is then not complete by the
time that request submission has been done.

For deferred execution, if the file is a regular file, assign it when
we do the async prep anyway.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/io_uring.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/fs/io_uring.c b/fs/io_uring.c
index 7aad4bde92e9..2f7ac8df9a0c 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -6506,7 +6506,12 @@ static int io_req_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe)
 
 static int io_req_prep_async(struct io_kiocb *req)
 {
-	if (!io_op_defs[req->opcode].needs_async_setup)
+	const struct io_op_def *def = &io_op_defs[req->opcode];
+
+	/* assign early for deferred execution for non-fixed file */
+	if (def->needs_file && !(req->flags & REQ_F_FIXED_FILE))
+		req->file = io_file_get_normal(req, req->fd);
+	if (!def->needs_async_setup)
 		return 0;
 	if (WARN_ON_ONCE(req->async_data))
 		return -EFAULT;
-- 
2.35.1

Re: [PATCH AUTOSEL 5.15 09/19] io_uring: assign non-fixed early for async work

[Jens Axboe]

On 5/10/22 9:44 AM, Sasha Levin wrote:
> From: Jens Axboe <axboe@kernel.dk>
> 
> [ Upstream commit a196c78b5443fc61af2c0490213b9d125482cbd1 ]
> 
> We defer file assignment to ensure that fixed files work with links
> between a direct accept/open and the links that follow it. But this has
> the side effect that normal file assignment is then not complete by the
> time that request submission has been done.
> 
> For deferred execution, if the file is a regular file, assign it when
> we do the async prep anyway.

This one should only go into 5.17-stable, not anything earlier.

-- 
Jens Axboe

[PATCH AUTOSEL 5.15 10/19] net: emaclite: Don't advertise 1000BASE-T and do auto negotiation

[Sasha Levin]

From: Shravya Kumbham <shravya.kumbham@xilinx.com>

[ Upstream commit b800528b97d0adc3a5ba42d78a8b0d3f07a31f44 ]

In xemaclite_open() function we are setting the max speed of
emaclite to 100Mb using phy_set_max_speed() function so,
there is no need to write the advertising registers to stop
giga-bit speed and the phy_start() function starts the
auto-negotiation so, there is no need to handle it separately
using advertising registers. Remove the phy_read and phy_write
of advertising registers in xemaclite_open() function.

Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/xilinx/xilinx_emaclite.c | 15 ---------------
 1 file changed, 15 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index 5524ac4fae80..cc15d4c53a12 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -925,8 +925,6 @@ static int xemaclite_open(struct net_device *dev)
 	xemaclite_disable_interrupts(lp);
 
 	if (lp->phy_node) {
-		u32 bmcr;
-
 		lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node,
 					     xemaclite_adjust_link, 0,
 					     PHY_INTERFACE_MODE_MII);
@@ -937,19 +935,6 @@ static int xemaclite_open(struct net_device *dev)
 
 		/* EmacLite doesn't support giga-bit speeds */
 		phy_set_max_speed(lp->phy_dev, SPEED_100);
-
-		/* Don't advertise 1000BASE-T Full/Half duplex speeds */
-		phy_write(lp->phy_dev, MII_CTRL1000, 0);
-
-		/* Advertise only 10 and 100mbps full/half duplex speeds */
-		phy_write(lp->phy_dev, MII_ADVERTISE, ADVERTISE_ALL |
-			  ADVERTISE_CSMA);
-
-		/* Restart auto negotiation */
-		bmcr = phy_read(lp->phy_dev, MII_BMCR);
-		bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
-		phy_write(lp->phy_dev, MII_BMCR, bmcr);
-
 		phy_start(lp->phy_dev);
 	}
 
-- 
2.35.1

[PATCH AUTOSEL 5.15 10/19] net: emaclite: Don't advertise 1000BASE-T and do auto negotiation

[Sasha Levin]

From: Shravya Kumbham <shravya.kumbham@xilinx.com>

[ Upstream commit b800528b97d0adc3a5ba42d78a8b0d3f07a31f44 ]

In xemaclite_open() function we are setting the max speed of
emaclite to 100Mb using phy_set_max_speed() function so,
there is no need to write the advertising registers to stop
giga-bit speed and the phy_start() function starts the
auto-negotiation so, there is no need to handle it separately
using advertising registers. Remove the phy_read and phy_write
of advertising registers in xemaclite_open() function.

Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/xilinx/xilinx_emaclite.c | 15 ---------------
 1 file changed, 15 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index 5524ac4fae80..cc15d4c53a12 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -925,8 +925,6 @@ static int xemaclite_open(struct net_device *dev)
 	xemaclite_disable_interrupts(lp);
 
 	if (lp->phy_node) {
-		u32 bmcr;
-
 		lp->phy_dev = of_phy_connect(lp->ndev, lp->phy_node,
 					     xemaclite_adjust_link, 0,
 					     PHY_INTERFACE_MODE_MII);
@@ -937,19 +935,6 @@ static int xemaclite_open(struct net_device *dev)
 
 		/* EmacLite doesn't support giga-bit speeds */
 		phy_set_max_speed(lp->phy_dev, SPEED_100);
-
-		/* Don't advertise 1000BASE-T Full/Half duplex speeds */
-		phy_write(lp->phy_dev, MII_CTRL1000, 0);
-
-		/* Advertise only 10 and 100mbps full/half duplex speeds */
-		phy_write(lp->phy_dev, MII_ADVERTISE, ADVERTISE_ALL |
-			  ADVERTISE_CSMA);
-
-		/* Restart auto negotiation */
-		bmcr = phy_read(lp->phy_dev, MII_BMCR);
-		bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
-		phy_write(lp->phy_dev, MII_BMCR, bmcr);
-
 		phy_start(lp->phy_dev);
 	}
 
-- 
2.35.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.15 11/19] net: sfp: Add tx-fault workaround for Huawei MA5671A SFP ONT

[Sasha Levin]

From: Matthew Hagan <mnhagan88@gmail.com>

[ Upstream commit 2069624dac19d62c558bb6468fe03678553ab01d ]

As noted elsewhere, various GPON SFP modules exhibit non-standard
TX-fault behaviour. In the tested case, the Huawei MA5671A, when used
in combination with a Marvell mv88e6085 switch, was found to
persistently assert TX-fault, resulting in the module being disabled.

This patch adds a quirk to ignore the SFP_F_TX_FAULT state, allowing the
module to function.

Change from v1: removal of erroneous return statment (Andrew Lunn)

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220502223315.1973376-1-mnhagan88@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/sfp.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index 4720b24ca51b..90dfefc1f5f8 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -250,6 +250,7 @@ struct sfp {
 	struct sfp_eeprom_id id;
 	unsigned int module_power_mW;
 	unsigned int module_t_start_up;
+	bool tx_fault_ignore;
 
 #if IS_ENABLED(CONFIG_HWMON)
 	struct sfp_diag diag;
@@ -1945,6 +1946,12 @@ static int sfp_sm_mod_probe(struct sfp *sfp, bool report)
 	else
 		sfp->module_t_start_up = T_START_UP;
 
+	if (!memcmp(id.base.vendor_name, "HUAWEI          ", 16) &&
+	    !memcmp(id.base.vendor_pn, "MA5671A         ", 16))
+		sfp->tx_fault_ignore = true;
+	else
+		sfp->tx_fault_ignore = false;
+
 	return 0;
 }
 
@@ -2397,7 +2404,10 @@ static void sfp_check_state(struct sfp *sfp)
 	mutex_lock(&sfp->st_mutex);
 	state = sfp_get_state(sfp);
 	changed = state ^ sfp->state;
-	changed &= SFP_F_PRESENT | SFP_F_LOS | SFP_F_TX_FAULT;
+	if (sfp->tx_fault_ignore)
+		changed &= SFP_F_PRESENT | SFP_F_LOS;
+	else
+		changed &= SFP_F_PRESENT | SFP_F_LOS | SFP_F_TX_FAULT;
 
 	for (i = 0; i < GPIO_MAX; i++)
 		if (changed & BIT(i))
-- 
2.35.1

[PATCH AUTOSEL 5.15 12/19] secure_seq: use the 64 bits of the siphash for port offset calculation

[Sasha Levin]

From: Willy Tarreau <w@1wt.eu>

[ Upstream commit b2d057560b8107c633b39aabe517ff9d93f285e3 ]

SipHash replaced MD5 in secure_ipv{4,6}_port_ephemeral() via commit
7cd23e5300c1 ("secure_seq: use SipHash in place of MD5"), but the output
remained truncated to 32-bit only. In order to exploit more bits from the
hash, let's make the functions return the full 64-bit of siphash_3u32().
We also make sure the port offset calculation in __inet_hash_connect()
remains done on 32-bit to avoid the need for div_u64_rem() and an extra
cost on 32-bit systems.

Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/inet_hashtables.h |  2 +-
 include/net/secure_seq.h      |  4 ++--
 net/core/secure_seq.c         |  4 ++--
 net/ipv4/inet_hashtables.c    | 10 ++++++----
 net/ipv6/inet6_hashtables.c   |  4 ++--
 5 files changed, 13 insertions(+), 11 deletions(-)

diff --git a/include/net/inet_hashtables.h b/include/net/inet_hashtables.h
index f72ec113ae56..98e1ec1a14f0 100644
--- a/include/net/inet_hashtables.h
+++ b/include/net/inet_hashtables.h
@@ -425,7 +425,7 @@ static inline void sk_rcv_saddr_set(struct sock *sk, __be32 addr)
 }
 
 int __inet_hash_connect(struct inet_timewait_death_row *death_row,
-			struct sock *sk, u32 port_offset,
+			struct sock *sk, u64 port_offset,
 			int (*check_established)(struct inet_timewait_death_row *,
 						 struct sock *, __u16,
 						 struct inet_timewait_sock **));
diff --git a/include/net/secure_seq.h b/include/net/secure_seq.h
index d7d2495f83c2..dac91aa38c5a 100644
--- a/include/net/secure_seq.h
+++ b/include/net/secure_seq.h
@@ -4,8 +4,8 @@
 
 #include <linux/types.h>
 
-u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport);
-u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
+u64 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport);
+u64 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
 			       __be16 dport);
 u32 secure_tcp_seq(__be32 saddr, __be32 daddr,
 		   __be16 sport, __be16 dport);
diff --git a/net/core/secure_seq.c b/net/core/secure_seq.c
index b5bc680d4755..444cce0184c3 100644
--- a/net/core/secure_seq.c
+++ b/net/core/secure_seq.c
@@ -94,7 +94,7 @@ u32 secure_tcpv6_seq(const __be32 *saddr, const __be32 *daddr,
 }
 EXPORT_SYMBOL(secure_tcpv6_seq);
 
-u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
+u64 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
 			       __be16 dport)
 {
 	const struct {
@@ -142,7 +142,7 @@ u32 secure_tcp_seq(__be32 saddr, __be32 daddr,
 }
 EXPORT_SYMBOL_GPL(secure_tcp_seq);
 
-u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport)
+u64 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport)
 {
 	net_secret_init();
 	return siphash_3u32((__force u32)saddr, (__force u32)daddr,
diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c
index 7bd1e10086f0..606a4220ebb9 100644
--- a/net/ipv4/inet_hashtables.c
+++ b/net/ipv4/inet_hashtables.c
@@ -504,7 +504,7 @@ static int __inet_check_established(struct inet_timewait_death_row *death_row,
 	return -EADDRNOTAVAIL;
 }
 
-static u32 inet_sk_port_offset(const struct sock *sk)
+static u64 inet_sk_port_offset(const struct sock *sk)
 {
 	const struct inet_sock *inet = inet_sk(sk);
 
@@ -734,7 +734,7 @@ EXPORT_SYMBOL_GPL(inet_unhash);
 static u32 table_perturb[1 << INET_TABLE_PERTURB_SHIFT];
 
 int __inet_hash_connect(struct inet_timewait_death_row *death_row,
-		struct sock *sk, u32 port_offset,
+		struct sock *sk, u64 port_offset,
 		int (*check_established)(struct inet_timewait_death_row *,
 			struct sock *, __u16, struct inet_timewait_sock **))
 {
@@ -777,7 +777,9 @@ int __inet_hash_connect(struct inet_timewait_death_row *death_row,
 	net_get_random_once(table_perturb, sizeof(table_perturb));
 	index = hash_32(port_offset, INET_TABLE_PERTURB_SHIFT);
 
-	offset = (READ_ONCE(table_perturb[index]) + port_offset) % remaining;
+	offset = READ_ONCE(table_perturb[index]) + port_offset;
+	offset %= remaining;
+
 	/* In first pass we try ports of @low parity.
 	 * inet_csk_get_port() does the opposite choice.
 	 */
@@ -859,7 +861,7 @@ int __inet_hash_connect(struct inet_timewait_death_row *death_row,
 int inet_hash_connect(struct inet_timewait_death_row *death_row,
 		      struct sock *sk)
 {
-	u32 port_offset = 0;
+	u64 port_offset = 0;
 
 	if (!inet_sk(sk)->inet_num)
 		port_offset = inet_sk_port_offset(sk);
diff --git a/net/ipv6/inet6_hashtables.c b/net/ipv6/inet6_hashtables.c
index 0a2e7f228391..40203255ed88 100644
--- a/net/ipv6/inet6_hashtables.c
+++ b/net/ipv6/inet6_hashtables.c
@@ -308,7 +308,7 @@ static int __inet6_check_established(struct inet_timewait_death_row *death_row,
 	return -EADDRNOTAVAIL;
 }
 
-static u32 inet6_sk_port_offset(const struct sock *sk)
+static u64 inet6_sk_port_offset(const struct sock *sk)
 {
 	const struct inet_sock *inet = inet_sk(sk);
 
@@ -320,7 +320,7 @@ static u32 inet6_sk_port_offset(const struct sock *sk)
 int inet6_hash_connect(struct inet_timewait_death_row *death_row,
 		       struct sock *sk)
 {
-	u32 port_offset = 0;
+	u64 port_offset = 0;
 
 	if (!inet_sk(sk)->inet_num)
 		port_offset = inet6_sk_port_offset(sk);
-- 
2.35.1

[PATCH AUTOSEL 5.15 13/19] tcp: use different parts of the port_offset for index and offset

[Sasha Levin]

From: Willy Tarreau <w@1wt.eu>

[ Upstream commit 9e9b70ae923baf2b5e8a0ea4fd0c8451801ac526 ]

Amit Klein suggests that we use different parts of port_offset for the
table's index and the port offset so that there is no direct relation
between them.

Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/inet_hashtables.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c
index 606a4220ebb9..81a33af8393d 100644
--- a/net/ipv4/inet_hashtables.c
+++ b/net/ipv4/inet_hashtables.c
@@ -777,7 +777,7 @@ int __inet_hash_connect(struct inet_timewait_death_row *death_row,
 	net_get_random_once(table_perturb, sizeof(table_perturb));
 	index = hash_32(port_offset, INET_TABLE_PERTURB_SHIFT);
 
-	offset = READ_ONCE(table_perturb[index]) + port_offset;
+	offset = READ_ONCE(table_perturb[index]) + (port_offset >> 32);
 	offset %= remaining;
 
 	/* In first pass we try ports of @low parity.
-- 
2.35.1

[PATCH AUTOSEL 5.15 14/19] tcp: resalt the secret every 10 seconds

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 4dfa9b438ee34caca4e6a4e5e961641807367f6f ]

In order to limit the ability for an observer to recognize the source
ports sequence used to contact a set of destinations, we should
periodically shuffle the secret. 10 seconds looks effective enough
without causing particular issues.

Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/secure_seq.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/net/core/secure_seq.c b/net/core/secure_seq.c
index 444cce0184c3..7131cd1fb2ad 100644
--- a/net/core/secure_seq.c
+++ b/net/core/secure_seq.c
@@ -22,6 +22,8 @@
 static siphash_key_t net_secret __read_mostly;
 static siphash_key_t ts_secret __read_mostly;
 
+#define EPHEMERAL_PORT_SHUFFLE_PERIOD (10 * HZ)
+
 static __always_inline void net_secret_init(void)
 {
 	net_get_random_once(&net_secret, sizeof(net_secret));
@@ -100,11 +102,13 @@ u64 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
 	const struct {
 		struct in6_addr saddr;
 		struct in6_addr daddr;
+		unsigned int timeseed;
 		__be16 dport;
 	} __aligned(SIPHASH_ALIGNMENT) combined = {
 		.saddr = *(struct in6_addr *)saddr,
 		.daddr = *(struct in6_addr *)daddr,
-		.dport = dport
+		.timeseed = jiffies / EPHEMERAL_PORT_SHUFFLE_PERIOD,
+		.dport = dport,
 	};
 	net_secret_init();
 	return siphash(&combined, offsetofend(typeof(combined), dport),
@@ -145,8 +149,10 @@ EXPORT_SYMBOL_GPL(secure_tcp_seq);
 u64 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport)
 {
 	net_secret_init();
-	return siphash_3u32((__force u32)saddr, (__force u32)daddr,
-			    (__force u16)dport, &net_secret);
+	return siphash_4u32((__force u32)saddr, (__force u32)daddr,
+			    (__force u16)dport,
+			    jiffies / EPHEMERAL_PORT_SHUFFLE_PERIOD,
+			    &net_secret);
 }
 EXPORT_SYMBOL_GPL(secure_ipv4_port_ephemeral);
 #endif
-- 
2.35.1

[PATCH AUTOSEL 5.15 15/19] tcp: add small random increments to the source port

[Sasha Levin]

From: Willy Tarreau <w@1wt.eu>

[ Upstream commit ca7af0402550f9a0b3316d5f1c30904e42ed257d ]

Here we're randomly adding between 0 and 7 random increments to the
selected source port in order to add some noise in the source port
selection that will make the next port less predictable.

With the default port range of 32768-60999 this means a worst case
reuse scenario of 14116/8=1764 connections between two consecutive
uses of the same port, with an average of 14116/4.5=3137. This code
was stressed at more than 800000 connections per second to a fixed
target with all connections closed by the client using RSTs (worst
condition) and only 2 connections failed among 13 billion, despite
the hash being reseeded every 10 seconds, indicating a perfectly
safe situation.

Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/inet_hashtables.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c
index 81a33af8393d..573a7e66ebc8 100644
--- a/net/ipv4/inet_hashtables.c
+++ b/net/ipv4/inet_hashtables.c
@@ -833,11 +833,12 @@ int __inet_hash_connect(struct inet_timewait_death_row *death_row,
 	return -EADDRNOTAVAIL;
 
 ok:
-	/* If our first attempt found a candidate, skip next candidate
-	 * in 1/16 of cases to add some noise.
+	/* Here we want to add a little bit of randomness to the next source
+	 * port that will be chosen. We use a max() with a random here so that
+	 * on low contention the randomness is maximal and on high contention
+	 * it may be inexistent.
 	 */
-	if (!i && !(prandom_u32() % 16))
-		i = 2;
+	i = max_t(int, i, (prandom_u32() & 7) * 2);
 	WRITE_ONCE(table_perturb[index], READ_ONCE(table_perturb[index]) + i + 2);
 
 	/* Head lock still held and bh's disabled */
-- 
2.35.1

[PATCH AUTOSEL 5.15 16/19] tcp: dynamically allocate the perturb table used by source ports

[Sasha Levin]

From: Willy Tarreau <w@1wt.eu>

[ Upstream commit e9261476184be1abd486c9434164b2acbe0ed6c2 ]

We'll need to further increase the size of this table and it's likely
that at some point its size will not be suitable anymore for a static
table. Let's allocate it on boot from inet_hashinfo2_init(), which is
called from tcp_init().

Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/inet_hashtables.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c
index 573a7e66ebc8..763395e30c77 100644
--- a/net/ipv4/inet_hashtables.c
+++ b/net/ipv4/inet_hashtables.c
@@ -731,7 +731,8 @@ EXPORT_SYMBOL_GPL(inet_unhash);
  * privacy, this only consumes 1 KB of kernel memory.
  */
 #define INET_TABLE_PERTURB_SHIFT 8
-static u32 table_perturb[1 << INET_TABLE_PERTURB_SHIFT];
+#define INET_TABLE_PERTURB_SIZE (1 << INET_TABLE_PERTURB_SHIFT)
+static u32 *table_perturb;
 
 int __inet_hash_connect(struct inet_timewait_death_row *death_row,
 		struct sock *sk, u64 port_offset,
@@ -774,7 +775,8 @@ int __inet_hash_connect(struct inet_timewait_death_row *death_row,
 	if (likely(remaining > 1))
 		remaining &= ~1U;
 
-	net_get_random_once(table_perturb, sizeof(table_perturb));
+	net_get_random_once(table_perturb,
+			    INET_TABLE_PERTURB_SIZE * sizeof(*table_perturb));
 	index = hash_32(port_offset, INET_TABLE_PERTURB_SHIFT);
 
 	offset = READ_ONCE(table_perturb[index]) + (port_offset >> 32);
@@ -912,6 +914,12 @@ void __init inet_hashinfo2_init(struct inet_hashinfo *h, const char *name,
 					    low_limit,
 					    high_limit);
 	init_hashinfo_lhash2(h);
+
+	/* this one is used for source ports of outgoing connections */
+	table_perturb = kmalloc_array(INET_TABLE_PERTURB_SIZE,
+				      sizeof(*table_perturb), GFP_KERNEL);
+	if (!table_perturb)
+		panic("TCP: failed to alloc table_perturb");
 }
 
 int inet_hashinfo2_init_mod(struct inet_hashinfo *h)
-- 
2.35.1

[PATCH AUTOSEL 5.15 17/19] tcp: increase source port perturb table to 2^16

[Sasha Levin]

From: Willy Tarreau <w@1wt.eu>

[ Upstream commit 4c2c8f03a5ab7cb04ec64724d7d176d00bcc91e5 ]

Moshe Kol, Amit Klein, and Yossi Gilad reported being able to accurately
identify a client by forcing it to emit only 40 times more connections
than there are entries in the table_perturb[] table. The previous two
improvements consisting in resalting the secret every 10s and adding
randomness to each port selection only slightly improved the situation,
and the current value of 2^8 was too small as it's not very difficult
to make a client emit 10k connections in less than 10 seconds.

Thus we're increasing the perturb table from 2^8 to 2^16 so that the
same precision now requires 2.6M connections, which is more difficult in
this time frame and harder to hide as a background activity. The impact
is that the table now uses 256 kB instead of 1 kB, which could mostly
affect devices making frequent outgoing connections. However such
components usually target a small set of destinations (load balancers,
database clients, perf assessment tools), and in practice only a few
entries will be visited, like before.

A live test at 1 million connections per second showed no performance
difference from the previous value.

Reported-by: Moshe Kol <moshe.kol@mail.huji.ac.il>
Reported-by: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Reported-by: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/inet_hashtables.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c
index 763395e30c77..f76e4ac1ba3a 100644
--- a/net/ipv4/inet_hashtables.c
+++ b/net/ipv4/inet_hashtables.c
@@ -726,11 +726,12 @@ EXPORT_SYMBOL_GPL(inet_unhash);
  * Note that we use 32bit integers (vs RFC 'short integers')
  * because 2^16 is not a multiple of num_ephemeral and this
  * property might be used by clever attacker.
- * RFC claims using TABLE_LENGTH=10 buckets gives an improvement,
- * we use 256 instead to really give more isolation and
- * privacy, this only consumes 1 KB of kernel memory.
+ * RFC claims using TABLE_LENGTH=10 buckets gives an improvement, though
+ * attacks were since demonstrated, thus we use 65536 instead to really
+ * give more isolation and privacy, at the expense of 256kB of kernel
+ * memory.
  */
-#define INET_TABLE_PERTURB_SHIFT 8
+#define INET_TABLE_PERTURB_SHIFT 16
 #define INET_TABLE_PERTURB_SIZE (1 << INET_TABLE_PERTURB_SHIFT)
 static u32 *table_perturb;
 
-- 
2.35.1

[PATCH AUTOSEL 5.15 18/19] tcp: drop the hash_32() part from the index calculation

[Sasha Levin]

From: Willy Tarreau <w@1wt.eu>

[ Upstream commit e8161345ddbb66e449abde10d2fdce93f867eba9 ]

In commit 190cc82489f4 ("tcp: change source port randomizarion at
connect() time"), the table_perturb[] array was introduced and an
index was taken from the port_offset via hash_32(). But it turns
out that hash_32() performs a multiplication while the input here
comes from the output of SipHash in secure_seq, that is well
distributed enough to avoid the need for yet another hash.

Suggested-by: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/inet_hashtables.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c
index f76e4ac1ba3a..ee9c587031b4 100644
--- a/net/ipv4/inet_hashtables.c
+++ b/net/ipv4/inet_hashtables.c
@@ -778,7 +778,7 @@ int __inet_hash_connect(struct inet_timewait_death_row *death_row,
 
 	net_get_random_once(table_perturb,
 			    INET_TABLE_PERTURB_SIZE * sizeof(*table_perturb));
-	index = hash_32(port_offset, INET_TABLE_PERTURB_SHIFT);
+	index = port_offset & (INET_TABLE_PERTURB_SIZE - 1);
 
 	offset = READ_ONCE(table_perturb[index]) + (port_offset >> 32);
 	offset %= remaining;
-- 
2.35.1

[PATCH AUTOSEL 5.15 19/19] Revert "parisc: Fix patch code locking and flushing"

[Sasha Levin]

From: Helge Deller <deller@gmx.de>

[ Upstream commit 6c800d7f55fcd78e17deae5ae4374d8e73482c13 ]

This reverts commit a9fe7fa7d874a536e0540469f314772c054a0323.

Leads to segfaults on 32bit kernel.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/parisc/kernel/patch.c | 25 ++++++++++++++-----------
 1 file changed, 14 insertions(+), 11 deletions(-)

diff --git a/arch/parisc/kernel/patch.c b/arch/parisc/kernel/patch.c
index e59574f65e64..80a0ab372802 100644
--- a/arch/parisc/kernel/patch.c
+++ b/arch/parisc/kernel/patch.c
@@ -40,7 +40,10 @@ static void __kprobes *patch_map(void *addr, int fixmap, unsigned long *flags,
 
 	*need_unmap = 1;
 	set_fixmap(fixmap, page_to_phys(page));
-	raw_spin_lock_irqsave(&patch_lock, *flags);
+	if (flags)
+		raw_spin_lock_irqsave(&patch_lock, *flags);
+	else
+		__acquire(&patch_lock);
 
 	return (void *) (__fix_to_virt(fixmap) + (uintaddr & ~PAGE_MASK));
 }
@@ -49,7 +52,10 @@ static void __kprobes patch_unmap(int fixmap, unsigned long *flags)
 {
 	clear_fixmap(fixmap);
 
-	raw_spin_unlock_irqrestore(&patch_lock, *flags);
+	if (flags)
+		raw_spin_unlock_irqrestore(&patch_lock, *flags);
+	else
+		__release(&patch_lock);
 }
 
 void __kprobes __patch_text_multiple(void *addr, u32 *insn, unsigned int len)
@@ -61,9 +67,8 @@ void __kprobes __patch_text_multiple(void *addr, u32 *insn, unsigned int len)
 	int mapped;
 
 	/* Make sure we don't have any aliases in cache */
-	flush_kernel_dcache_range_asm(start, end);
-	flush_kernel_icache_range_asm(start, end);
-	flush_tlb_kernel_range(start, end);
+	flush_kernel_vmap_range(addr, len);
+	flush_icache_range(start, end);
 
 	p = fixmap = patch_map(addr, FIX_TEXT_POKE0, &flags, &mapped);
 
@@ -76,10 +81,8 @@ void __kprobes __patch_text_multiple(void *addr, u32 *insn, unsigned int len)
 			 * We're crossing a page boundary, so
 			 * need to remap
 			 */
-			flush_kernel_dcache_range_asm((unsigned long)fixmap,
-						      (unsigned long)p);
-			flush_tlb_kernel_range((unsigned long)fixmap,
-					       (unsigned long)p);
+			flush_kernel_vmap_range((void *)fixmap,
+						(p-fixmap) * sizeof(*p));
 			if (mapped)
 				patch_unmap(FIX_TEXT_POKE0, &flags);
 			p = fixmap = patch_map(addr, FIX_TEXT_POKE0, &flags,
@@ -87,10 +90,10 @@ void __kprobes __patch_text_multiple(void *addr, u32 *insn, unsigned int len)
 		}
 	}
 
-	flush_kernel_dcache_range_asm((unsigned long)fixmap, (unsigned long)p);
-	flush_tlb_kernel_range((unsigned long)fixmap, (unsigned long)p);
+	flush_kernel_vmap_range((void *)fixmap, (p-fixmap) * sizeof(*p));
 	if (mapped)
 		patch_unmap(FIX_TEXT_POKE0, &flags);
+	flush_icache_range(start, end);
 }
 
 void __kprobes __patch_text(void *addr, u32 insn)
-- 
2.35.1