All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
To: Geert Uytterhoeven <geert+renesas@glider.be>,
	Linus Walleij <linus.walleij@linaro.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Marc Zyngier <maz@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Bartosz Golaszewski <brgl@bgdev.pl>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	linux-gpio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
	devicetree@vger.kernel.org,
	Phil Edworthy <phil.edworthy@renesas.com>,
	Biju Das <biju.das.jz@bp.renesas.com>,
	Prabhakar <prabhakar.csengg@gmail.com>,
	Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Subject: [PATCH v3 5/5] pinctrl: renesas: pinctrl-rzg2l: Add IRQ domain to handle GPIO interrupt
Date: Wed, 11 May 2022 19:32:10 +0100	[thread overview]
Message-ID: <20220511183210.5248-6-prabhakar.mahadev-lad.rj@bp.renesas.com> (raw)
In-Reply-To: <20220511183210.5248-1-prabhakar.mahadev-lad.rj@bp.renesas.com>

Add IRQ domian to RZ/G2L pinctrl driver to handle GPIO interrupt.

GPIO0-GPIO122 pins can be used as IRQ lines but only 32 pins can be
used as IRQ lines at given time. Selection of pins as IRQ lines
is handled by IA55 (which is the IRQC block) which sits in between the
GPIO and GIC.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 drivers/pinctrl/renesas/pinctrl-rzg2l.c | 202 ++++++++++++++++++++++++
 1 file changed, 202 insertions(+)

diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index a48cac55152c..af2c739cdbaa 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -9,8 +9,10 @@
 #include <linux/clk.h>
 #include <linux/gpio/driver.h>
 #include <linux/io.h>
+#include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
+#include <linux/of_irq.h>
 #include <linux/pinctrl/pinconf-generic.h>
 #include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinctrl.h>
@@ -89,6 +91,7 @@
 #define PIN(n)			(0x0800 + 0x10 + (n))
 #define IOLH(n)			(0x1000 + (n) * 8)
 #define IEN(n)			(0x1800 + (n) * 8)
+#define ISEL(n)			(0x2c80 + (n) * 8)
 #define PWPR			(0x3014)
 #define SD_CH(n)		(0x3000 + (n) * 4)
 #define QSPI			(0x3008)
@@ -112,6 +115,10 @@
 #define RZG2L_PIN_ID_TO_PORT_OFFSET(id)	(RZG2L_PIN_ID_TO_PORT(id) + 0x10)
 #define RZG2L_PIN_ID_TO_PIN(id)		((id) % RZG2L_PINS_PER_PORT)
 
+#define RZG2L_TINT_MAX_INTERRUPT	32
+#define RZG2L_TINT_IRQ_START_INDEX	9
+#define RZG2L_PACK_HWIRQ(t, i)		(((t) << 16) | (i))
+
 struct rzg2l_dedicated_configs {
 	const char *name;
 	u32 config;
@@ -137,6 +144,9 @@ struct rzg2l_pinctrl {
 
 	struct gpio_chip		gpio_chip;
 	struct pinctrl_gpio_range	gpio_range;
+	DECLARE_BITMAP(tint_slot, RZG2L_TINT_MAX_INTERRUPT);
+	spinlock_t			bitmap_lock;
+	unsigned int			hwirq[RZG2L_TINT_MAX_INTERRUPT];
 
 	spinlock_t			lock;
 };
@@ -883,6 +893,8 @@ static int rzg2l_gpio_get(struct gpio_chip *chip, unsigned int offset)
 
 static void rzg2l_gpio_free(struct gpio_chip *chip, unsigned int offset)
 {
+	unsigned int virq;
+
 	pinctrl_gpio_free(chip->base + offset);
 
 	/*
@@ -890,6 +902,10 @@ static void rzg2l_gpio_free(struct gpio_chip *chip, unsigned int offset)
 	 * drive the GPIO pin as an output.
 	 */
 	rzg2l_gpio_direction_input(chip, offset);
+
+	virq = irq_find_mapping(chip->irq.domain, offset);
+	if (virq)
+		irq_dispose_mapping(virq);
 }
 
 static const char * const rzg2l_gpio_names[] = {
@@ -1104,14 +1120,190 @@ static struct {
 	}
 };
 
+static int rzg2l_gpio_get_gpioint(unsigned int virq)
+{
+	unsigned int gpioint;
+	unsigned int i;
+	u32 port, bit;
+
+	port = virq / 8;
+	bit = virq % 8;
+
+	if (port >= ARRAY_SIZE(rzg2l_gpio_configs) ||
+	    bit >= RZG2L_GPIO_PORT_GET_PINCNT(rzg2l_gpio_configs[port]))
+		return -EINVAL;
+
+	gpioint = bit;
+	for (i = 0; i < port; i++)
+		gpioint += RZG2L_GPIO_PORT_GET_PINCNT(rzg2l_gpio_configs[i]);
+
+	return gpioint;
+}
+
+static void rzg2l_gpio_irq_domain_free(struct irq_domain *domain, unsigned int virq,
+				       unsigned int nr_irqs)
+{
+	struct irq_data *d;
+
+	d = irq_domain_get_irq_data(domain, virq);
+	if (d) {
+		struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+		struct rzg2l_pinctrl *pctrl = container_of(gc, struct rzg2l_pinctrl, gpio_chip);
+		irq_hw_number_t hwirq = irqd_to_hwirq(d);
+		unsigned long flags;
+		unsigned int i;
+
+		for (i = 0; i < RZG2L_TINT_MAX_INTERRUPT; i++) {
+			if (pctrl->hwirq[i] == hwirq) {
+				spin_lock_irqsave(&pctrl->bitmap_lock, flags);
+				bitmap_release_region(pctrl->tint_slot, i, get_order(1));
+				spin_unlock_irqrestore(&pctrl->bitmap_lock, flags);
+				pctrl->hwirq[i] = 0;
+				break;
+			}
+		}
+	}
+	irq_domain_free_irqs_common(domain, virq, nr_irqs);
+}
+
+static void rzg2l_gpio_irq_disable(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct rzg2l_pinctrl *pctrl = container_of(gc, struct rzg2l_pinctrl, gpio_chip);
+	unsigned int hwirq = irqd_to_hwirq(d);
+	unsigned long flags;
+	void __iomem *addr;
+	u32 port;
+	u8 bit;
+
+	port = RZG2L_PIN_ID_TO_PORT(hwirq);
+	bit = RZG2L_PIN_ID_TO_PIN(hwirq);
+
+	addr = pctrl->base + ISEL(port);
+	if (bit >= 4) {
+		bit -= 4;
+		addr += 4;
+	}
+
+	spin_lock_irqsave(&pctrl->lock, flags);
+	writel(readl(addr) & ~BIT(bit * 8), addr);
+	spin_unlock_irqrestore(&pctrl->lock, flags);
+
+	irq_chip_disable_parent(d);
+}
+
+static void rzg2l_gpio_irq_enable(struct irq_data *d)
+{
+	struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+	struct rzg2l_pinctrl *pctrl = container_of(gc, struct rzg2l_pinctrl, gpio_chip);
+	unsigned int hwirq = irqd_to_hwirq(d);
+	unsigned long flags;
+	void __iomem *addr;
+	u32 port;
+	u8 bit;
+
+	port = RZG2L_PIN_ID_TO_PORT(hwirq);
+	bit = RZG2L_PIN_ID_TO_PIN(hwirq);
+
+	addr = pctrl->base + ISEL(port);
+	if (bit >= 4) {
+		bit -= 4;
+		addr += 4;
+	}
+
+	spin_lock_irqsave(&pctrl->lock, flags);
+	writel(readl(addr) | BIT(bit * 8), addr);
+	spin_unlock_irqrestore(&pctrl->lock, flags);
+
+	irq_chip_enable_parent(d);
+}
+
+static int rzg2l_gpio_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	return irq_chip_set_type_parent(d, type);
+}
+
+static void rzg2l_gpio_irqc_eoi(struct irq_data *d)
+{
+	irq_chip_eoi_parent(d);
+}
+
+static struct irq_chip rzg2l_gpio_irqchip = {
+	.name = "rzg2l-gpio",
+	.irq_disable = rzg2l_gpio_irq_disable,
+	.irq_enable = rzg2l_gpio_irq_enable,
+	.irq_mask = irq_chip_mask_parent,
+	.irq_unmask = irq_chip_unmask_parent,
+	.irq_set_type = rzg2l_gpio_irq_set_type,
+	.irq_eoi = rzg2l_gpio_irqc_eoi,
+};
+
+static int rzg2l_gpio_child_to_parent_hwirq(struct gpio_chip *gc,
+					    unsigned int child,
+					    unsigned int child_type,
+					    unsigned int *parent,
+					    unsigned int *parent_type)
+{
+	struct rzg2l_pinctrl *pctrl = gpiochip_get_data(gc);
+	unsigned long flags;
+	int gpioint, irq;
+
+	gpioint = rzg2l_gpio_get_gpioint(child);
+	if (gpioint < 0)
+		return gpioint;
+
+	spin_lock_irqsave(&pctrl->bitmap_lock, flags);
+	irq = bitmap_find_free_region(pctrl->tint_slot, RZG2L_TINT_MAX_INTERRUPT, get_order(1));
+	spin_unlock_irqrestore(&pctrl->bitmap_lock, flags);
+	if (irq < 0)
+		return -ENOSPC;
+	pctrl->hwirq[irq] = child;
+	irq += RZG2L_TINT_IRQ_START_INDEX;
+
+	/* All these interrupts are level high in the CPU */
+	*parent_type = IRQ_TYPE_LEVEL_HIGH;
+	*parent = RZG2L_PACK_HWIRQ(gpioint, irq);
+	return 0;
+}
+
+static void *rzg2l_gpio_populate_parent_fwspec(struct gpio_chip *chip,
+					       unsigned int parent_hwirq,
+					       unsigned int parent_type)
+{
+	struct irq_fwspec *fwspec;
+
+	fwspec = kzalloc(sizeof(*fwspec), GFP_KERNEL);
+	if (!fwspec)
+		return NULL;
+
+	fwspec->fwnode = chip->irq.parent_domain->fwnode;
+	fwspec->param_count = 2;
+	fwspec->param[0] = parent_hwirq;
+	fwspec->param[1] = parent_type;
+
+	return fwspec;
+}
+
 static int rzg2l_gpio_register(struct rzg2l_pinctrl *pctrl)
 {
 	struct device_node *np = pctrl->dev->of_node;
 	struct gpio_chip *chip = &pctrl->gpio_chip;
 	const char *name = dev_name(pctrl->dev);
+	struct irq_domain *parent_domain;
 	struct of_phandle_args of_args;
+	struct device_node *parent_np;
+	struct gpio_irq_chip *girq;
 	int ret;
 
+	parent_np = of_irq_find_parent(np);
+	if (!parent_np)
+		return -ENXIO;
+
+	parent_domain = irq_find_host(parent_np);
+	of_node_put(parent_np);
+	if (!parent_domain)
+		return -EPROBE_DEFER;
+
 	ret = of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, 0, &of_args);
 	if (ret) {
 		dev_err(pctrl->dev, "Unable to parse gpio-ranges\n");
@@ -1138,6 +1330,15 @@ static int rzg2l_gpio_register(struct rzg2l_pinctrl *pctrl)
 	chip->base = -1;
 	chip->ngpio = of_args.args[2];
 
+	girq = &chip->irq;
+	girq->chip = &rzg2l_gpio_irqchip;
+	girq->fwnode = of_node_to_fwnode(np);
+	girq->parent_domain = parent_domain;
+	girq->child_to_parent_hwirq = rzg2l_gpio_child_to_parent_hwirq;
+	girq->populate_parent_alloc_arg = rzg2l_gpio_populate_parent_fwspec;
+	girq->child_irq_domain_ops.free = rzg2l_gpio_irq_domain_free;
+	girq->ngirq = RZG2L_TINT_MAX_INTERRUPT;
+
 	pctrl->gpio_range.id = 0;
 	pctrl->gpio_range.pin_base = 0;
 	pctrl->gpio_range.base = 0;
@@ -1253,6 +1454,7 @@ static int rzg2l_pinctrl_probe(struct platform_device *pdev)
 	}
 
 	spin_lock_init(&pctrl->lock);
+	spin_lock_init(&pctrl->bitmap_lock);
 
 	platform_set_drvdata(pdev, pctrl);
 
-- 
2.25.1


  parent reply	other threads:[~2022-05-11 18:33 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-11 18:32 [PATCH v3 0/5] Renesas RZ/G2L IRQC support Lad Prabhakar
2022-05-11 18:32 ` [PATCH v3 1/5] dt-bindings: interrupt-controller: Add Renesas RZ/G2L Interrupt Controller Lad Prabhakar
2022-05-12  6:14   ` Biju Das
2022-05-12  6:43   ` Geert Uytterhoeven
2022-05-12 17:58     ` Lad, Prabhakar
2022-05-11 18:32 ` [PATCH v3 2/5] irqchip: Add RZ/G2L IA55 Interrupt Controller driver Lad Prabhakar
2022-05-11 19:25   ` Biju Das
2022-05-12 18:01     ` Lad, Prabhakar
2022-05-12  7:05   ` Geert Uytterhoeven
2022-05-12  7:23   ` Marc Zyngier
2022-05-12  7:26     ` Geert Uytterhoeven
2022-05-12 18:08     ` Lad, Prabhakar
2022-05-11 18:32 ` [PATCH v3 3/5] gpio: gpiolib: Allow free() callback to be overridden Lad Prabhakar
2022-05-12  7:06   ` Geert Uytterhoeven
2022-05-12 11:19   ` Marc Zyngier
2022-05-12 12:48     ` Lad, Prabhakar
2022-05-12 13:24       ` Marc Zyngier
2022-05-12 13:50         ` Lad, Prabhakar
2022-05-12 16:26           ` Marc Zyngier
2022-05-12 17:55             ` Lad, Prabhakar
2022-05-12 22:24               ` Marc Zyngier
2022-05-11 18:32 ` [PATCH v3 4/5] gpio: gpiolib: Add ngirq member to struct gpio_irq_chip Lad Prabhakar
2022-05-12  7:29   ` Geert Uytterhoeven
2022-05-18 18:30     ` Lad, Prabhakar
2022-05-13 20:47   ` Linus Walleij
2022-05-18 18:36     ` Lad, Prabhakar
2022-05-19 13:21       ` Linus Walleij
2022-05-11 18:32 ` Lad Prabhakar [this message]
2022-05-12  5:35   ` [PATCH v3 5/5] pinctrl: renesas: pinctrl-rzg2l: Add IRQ domain to handle GPIO interrupt Biju Das
2022-05-12 17:43     ` Lad, Prabhakar
2022-05-12 17:59       ` Biju Das
2022-05-13  6:12         ` Biju Das
2022-05-13 13:42           ` Lad, Prabhakar
2022-05-12  7:39   ` Geert Uytterhoeven
2022-05-12 17:36     ` Lad, Prabhakar
2022-05-13  6:53       ` Geert Uytterhoeven
2022-05-13 13:55         ` Lad, Prabhakar
2022-05-13 14:29           ` Geert Uytterhoeven
2022-05-13 18:13             ` Lad, Prabhakar
2022-05-15  5:13               ` Biju Das
     [not found]                 ` <87pmkfm0v3.wl-maz@kernel.org>
2022-05-16  7:20                   ` Biju Das
     [not found]                     ` <87pmkd6gda.wl-maz@kernel.org>
2022-05-16  8:33                       ` Biju Das
     [not found]                         ` <87o7zx6ckp.wl-maz@kernel.org>
2022-05-16  9:56                           ` Biju Das
2022-05-16  7:13               ` Geert Uytterhoeven
2022-05-18 19:04                 ` Lad, Prabhakar
2022-05-12 11:15   ` Marc Zyngier
2022-05-12 17:46     ` Lad, Prabhakar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220511183210.5248-6-prabhakar.mahadev-lad.rj@bp.renesas.com \
    --to=prabhakar.mahadev-lad.rj@bp.renesas.com \
    --cc=biju.das.jz@bp.renesas.com \
    --cc=brgl@bgdev.pl \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=phil.edworthy@renesas.com \
    --cc=prabhakar.csengg@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.