[PATCH v3 00/28] clk: More clock rate fixes and tests

[PATCH v3 00/28] clk: More clock rate fixes and tests

[Maxime Ripard]

Hi,

Thanks to the feedback I got on the previous series, I found and fixed a
number of bugs in the clock framework and how it deals with rates,
especially when it comes to orphan clocks.

In order to make sure this doesn't pop up again as a regression, I've
extended the number of tests.

The first patch reintroduces the clk_set_rate_range call on clk_put, but
this time will only do so if there was a range set on that clock to
begin with. It should be less intrusive, and reduce the number of
potential side effects considerably.

We then have a fix for the qcom rcg2 issue that has been reported
recently, and two patches to address a regression with the RaspberryPi4.

All the other patches should be probably be flagged as fixes, but
they've never seem to have shown any real-world issues until now, and
they aren't all really trivial to backport either, so I'm not sure it's
worth it.

There's also some documentation improvements for recalc_rate and
clk_get_rate to hopefully make the documentation less ambiguous and
acknowledge that recalc_rate() returning 0 on error is fine.

Let me know what you think,
Maxime

Changes from v2:
  - Rebased on top of current next
  - Fixed locking issue in clk_get_rate_range

Changes from v1:
  - Rebased on top of next-20220428
  - Dropped the patch to prevent non-orphan clocks from registering if
    their recalc_rate hook returns 0
  - Added some patches to clarify the clk_get_rate and recalc_rate
    documentation
  - Dropped the patch to skip the range setup on an orphan clock that
    was introducing a regression on RaspberryPi3 when a monitor wasn't
    connected at boot
  - Added a patch to skip the rate clamping in clk_round_rate() when
    min_rate == max_rate == 0
  - Added a new set of functions to query the clk boundaries and fix a
    regression with the RaspberryPi4
  - Fixed all the drivers hand-crafting their clk_rate_request
  - Reworded the test suite descriptions
  - Reordered a few patches to ease the review
  - Reworded some commit logs to better explain the issues they address
  - Collected the Tested-by of Alexander and Marek
  - More tests

Maxime Ripard (28):
  clk: Drop the rate range on clk_put()
  clk: Skip clamping when rounding if there's no boundaries
  clk: Introduce clk_get_rate_range()
  drm/vc4: hdmi: Rework hdmi_enable_4kp60 detection
  clk: Mention that .recalc_rate can return 0 on error
  clk: Clarify clk_get_rate() expectations
  clk: tests: Add test suites description
  clk: tests: Add reference to the orphan mux bug report
  clk: tests: Add tests for uncached clock
  clk: tests: Add tests for single parent mux
  clk: tests: Add tests for mux with multiple parents
  clk: tests: Add some tests for orphan with multiple parents
  clk: Take into account uncached clocks in clk_set_rate_range()
  clk: Fix clk_get_parent() documentation
  clk: Set req_rate on reparenting
  clk: Change clk_core_init_rate_req prototype
  clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock()
    to its caller
  clk: Introduce clk_hw_init_rate_request()
  clk: Add our request boundaries in clk_core_init_rate_req
  clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock
  clk: Introduce clk_core_has_parent()
  clk: Stop forwarding clk_rate_requests to the parent
  clk: Zero the clk_rate_request structure
  clk: Test the clock pointer in clk_hw_get_name()
  clk: Introduce the clk_hw_get_rate_range function
  clk: qcom: clk-rcg2: Take clock boundaries into consideration for
    gfx3d
  clk: tests: Add some tests for clk_get_rate_range()
  clk: tests: Add missing test case for ranges

 drivers/clk/at91/clk-generated.c  |    4 +-
 drivers/clk/at91/clk-master.c     |    9 +-
 drivers/clk/at91/clk-peripheral.c |    4 +-
 drivers/clk/clk-composite.c       |    6 +-
 drivers/clk/clk-divider.c         |   20 +-
 drivers/clk/clk.c                 |  304 ++++--
 drivers/clk/clk_test.c            | 1465 ++++++++++++++++++++++++++++-
 drivers/clk/qcom/clk-rcg2.c       |    9 +
 drivers/gpu/drm/vc4/vc4_hdmi.c    |    2 +-
 include/linux/clk-provider.h      |   18 +-
 include/linux/clk.h               |   64 +-
 11 files changed, 1814 insertions(+), 91 deletions(-)

-- 
2.36.1

[PATCH v3 01/28] clk: Drop the rate range on clk_put()

[Maxime Ripard]

When clk_put() is called we don't make another clk_set_rate() call to
re-evaluate the rate boundaries. This is unlike clk_set_rate_range()
that evaluates the rate again each time it is called.

However, clk_put() is essentially equivalent to clk_set_rate_range()
since after clk_put() completes the consumer's boundaries shouldn't be
enforced anymore.

Let's add a call to clk_set_rate_range() in clk_put() to make sure those
rate boundaries are dropped and the clock provider drivers can react. In
order to be as non-intrusive as possible, we'll just make that call if
the clock had non-default boundaries.

Also add a few tests to make sure this case is covered.

Fixes: c80ac50cbb37 ("clk: Always set the rate on clk_set_range_rate")
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/clk.c      |  45 +++++++++++------
 drivers/clk/clk_test.c | 108 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 139 insertions(+), 14 deletions(-)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index f00d4c1158d7..2a32fa9f7618 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -2325,19 +2325,15 @@ int clk_set_rate_exclusive(struct clk *clk, unsigned long rate)
 }
 EXPORT_SYMBOL_GPL(clk_set_rate_exclusive);
 
-/**
- * clk_set_rate_range - set a rate range for a clock source
- * @clk: clock source
- * @min: desired minimum clock rate in Hz, inclusive
- * @max: desired maximum clock rate in Hz, inclusive
- *
- * Returns success (0) or negative errno.
- */
-int clk_set_rate_range(struct clk *clk, unsigned long min, unsigned long max)
+static int clk_set_rate_range_nolock(struct clk *clk,
+				     unsigned long min,
+				     unsigned long max)
 {
 	int ret = 0;
 	unsigned long old_min, old_max, rate;
 
+	lockdep_assert_held(&prepare_lock);
+
 	if (!clk)
 		return 0;
 
@@ -2350,8 +2346,6 @@ int clk_set_rate_range(struct clk *clk, unsigned long min, unsigned long max)
 		return -EINVAL;
 	}
 
-	clk_prepare_lock();
-
 	if (clk->exclusive_count)
 		clk_core_rate_unprotect(clk->core);
 
@@ -2395,6 +2389,28 @@ int clk_set_rate_range(struct clk *clk, unsigned long min, unsigned long max)
 	if (clk->exclusive_count)
 		clk_core_rate_protect(clk->core);
 
+	return ret;
+}
+
+/**
+ * clk_set_rate_range - set a rate range for a clock source
+ * @clk: clock source
+ * @min: desired minimum clock rate in Hz, inclusive
+ * @max: desired maximum clock rate in Hz, inclusive
+ *
+ * Return: 0 for success or negative errno on failure.
+ */
+int clk_set_rate_range(struct clk *clk, unsigned long min, unsigned long max)
+{
+	int ret;
+
+	if (!clk)
+		return 0;
+
+	clk_prepare_lock();
+
+	ret = clk_set_rate_range_nolock(clk, min, max);
+
 	clk_prepare_unlock();
 
 	return ret;
@@ -4396,9 +4412,10 @@ void __clk_put(struct clk *clk)
 	}
 
 	hlist_del(&clk->clks_node);
-	if (clk->min_rate > clk->core->req_rate ||
-	    clk->max_rate < clk->core->req_rate)
-		clk_core_set_rate_nolock(clk->core, clk->core->req_rate);
+
+	/* If we had any boundaries on that clock, let's drop them. */
+	if (clk->min_rate > 0 || clk->max_rate < ULONG_MAX)
+		clk_set_rate_range_nolock(clk, 0, ULONG_MAX);
 
 	owner = clk->core->owner;
 	kref_put(&clk->core->ref, __clk_release);
diff --git a/drivers/clk/clk_test.c b/drivers/clk/clk_test.c
index 6731a822f4e3..fd2339cc5898 100644
--- a/drivers/clk/clk_test.c
+++ b/drivers/clk/clk_test.c
@@ -760,9 +760,65 @@ static void clk_range_test_multiple_set_range_rate_maximized(struct kunit *test)
 	clk_put(user1);
 }
 
+/*
+ * Test that if we have several subsequent calls to
+ * clk_set_rate_range(), across multiple users, the core will reevaluate
+ * whether a new rate is needed, including when a user drop its clock.
+ *
+ * With clk_dummy_maximize_rate_ops, this means that the rate will
+ * trail along the maximum as it evolves.
+ */
+static void clk_range_test_multiple_set_range_rate_put_maximized(struct kunit *test)
+{
+	struct clk_dummy_context *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk;
+	struct clk *user1, *user2;
+	unsigned long rate;
+
+	user1 = clk_hw_get_clk(hw, NULL);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user1);
+
+	user2 = clk_hw_get_clk(hw, NULL);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user2);
+
+	KUNIT_ASSERT_EQ(test,
+			clk_set_rate(clk, DUMMY_CLOCK_RATE_2 + 1000),
+			0);
+
+	KUNIT_ASSERT_EQ(test,
+			clk_set_rate_range(user1,
+					   0,
+					   DUMMY_CLOCK_RATE_2),
+			0);
+
+	rate = clk_get_rate(clk);
+	KUNIT_ASSERT_GT(test, rate, 0);
+	KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2);
+
+	KUNIT_ASSERT_EQ(test,
+			clk_set_rate_range(user2,
+					   0,
+					   DUMMY_CLOCK_RATE_1),
+			0);
+
+	rate = clk_get_rate(clk);
+	KUNIT_ASSERT_GT(test, rate, 0);
+	KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
+
+	clk_put(user2);
+
+	rate = clk_get_rate(clk);
+	KUNIT_ASSERT_GT(test, rate, 0);
+	KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2);
+
+	clk_put(user1);
+}
+
 static struct kunit_case clk_range_maximize_test_cases[] = {
 	KUNIT_CASE(clk_range_test_set_range_rate_maximized),
 	KUNIT_CASE(clk_range_test_multiple_set_range_rate_maximized),
+	KUNIT_CASE(clk_range_test_multiple_set_range_rate_put_maximized),
 	{}
 };
 
@@ -877,9 +933,61 @@ static void clk_range_test_multiple_set_range_rate_minimized(struct kunit *test)
 	clk_put(user1);
 }
 
+/*
+ * Test that if we have several subsequent calls to
+ * clk_set_rate_range(), across multiple users, the core will reevaluate
+ * whether a new rate is needed, including when a user drop its clock.
+ *
+ * With clk_dummy_minimize_rate_ops, this means that the rate will
+ * trail along the minimum as it evolves.
+ */
+static void clk_range_test_multiple_set_range_rate_put_minimized(struct kunit *test)
+{
+	struct clk_dummy_context *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk;
+	struct clk *user1, *user2;
+	unsigned long rate;
+
+	user1 = clk_hw_get_clk(hw, NULL);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user1);
+
+	user2 = clk_hw_get_clk(hw, NULL);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user2);
+
+	KUNIT_ASSERT_EQ(test,
+			clk_set_rate_range(user1,
+					   DUMMY_CLOCK_RATE_1,
+					   ULONG_MAX),
+			0);
+
+	rate = clk_get_rate(clk);
+	KUNIT_ASSERT_GT(test, rate, 0);
+	KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
+
+	KUNIT_ASSERT_EQ(test,
+			clk_set_rate_range(user2,
+					   DUMMY_CLOCK_RATE_2,
+					   ULONG_MAX),
+			0);
+
+	rate = clk_get_rate(clk);
+	KUNIT_ASSERT_GT(test, rate, 0);
+	KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2);
+
+	clk_put(user2);
+
+	rate = clk_get_rate(clk);
+	KUNIT_ASSERT_GT(test, rate, 0);
+	KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
+
+	clk_put(user1);
+}
+
 static struct kunit_case clk_range_minimize_test_cases[] = {
 	KUNIT_CASE(clk_range_test_set_range_rate_minimized),
 	KUNIT_CASE(clk_range_test_multiple_set_range_rate_minimized),
+	KUNIT_CASE(clk_range_test_multiple_set_range_rate_put_minimized),
 	{}
 };
 
-- 
2.36.1

[PATCH v3 02/28] clk: Skip clamping when rounding if there's no boundaries

[Maxime Ripard]

Commit 948fb0969eae ("clk: Always clamp the rounded rate") recently
started to clamp the request rate in the clk_rate_request passed as an
argument of clk_core_determine_round_nolock() with the min_rate and
max_rate fields of that same request.

While the clk_rate_requests created by the framework itself always have
those fields set, some drivers will create it themselves and don't
always fill min_rate and max_rate.

In such a case, we end up clamping the rate with a minimum and maximum
of 0, thus always rounding the rate to 0.

Let's skip the clamping if both min_rate and max_rate are set to 0 and
complain so that it gets fixed.

Fixes: 948fb0969eae ("clk: Always clamp the rounded rate")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/clk.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 2a32fa9f7618..d46c00bbedea 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1341,7 +1341,19 @@ static int clk_core_determine_round_nolock(struct clk_core *core,
 	if (!core)
 		return 0;
 
-	req->rate = clamp(req->rate, req->min_rate, req->max_rate);
+	/*
+	 * Some clock providers hand-craft their clk_rate_requests and
+	 * might not fill min_rate and max_rate.
+	 *
+	 * If it's the case, clamping the rate is equivalent to setting
+	 * the rate to 0 which is bad. Skip the clamping but complain so
+	 * that it gets fixed, hopefully.
+	 */
+	if (!req->min_rate && !req->max_rate)
+		pr_warn("%s: %s: clk_rate_request has initialized min or max rate.\n",
+			__func__, core->name);
+	else
+		req->rate = clamp(req->rate, req->min_rate, req->max_rate);
 
 	/*
 	 * At this point, core protection will be disabled
-- 
2.36.1

[PATCH v3 03/28] clk: Introduce clk_get_rate_range()

[Maxime Ripard]

With the recent introduction of clock drivers that will force their
clock rate to either the minimum or maximum boundaries, it becomes
harder for clock users to discover either boundary of their clock.

Indeed, the best way to do that previously was to call clk_round_rate()
on either 0 or ULONG_MAX and count on the driver to clamp the rate to
the current boundary, but that won't work anymore.

Since any other alternative (calling clk_set_rate_range() and looking at
the returned value, calling clk_round_rate() still, or just doing
nothing) depends on how the driver will behaves, we actually are
punching a hole through the abstraction provided by the clock framework.

In order to avoid any abstraction violation, let's create a bunch of
accessors that will return the current minimum and maximum for a given
clock.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/clk.c   | 20 +++++++++++++++
 include/linux/clk.h | 59 +++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 79 insertions(+)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index d46c00bbedea..c9d7016550a2 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -2465,6 +2465,26 @@ int clk_set_max_rate(struct clk *clk, unsigned long rate)
 }
 EXPORT_SYMBOL_GPL(clk_set_max_rate);
 
+/**
+ * clk_get_rate_range - returns the clock rate range for a clock source
+ * @clk: clock source
+ * @min: Pointer to the variable that will hold the minimum
+ * @max: Pointer to the variable that will hold the maximum
+ *
+ * Fills the @min and @max variables with the minimum and maximum that
+ * the clock source can reach.
+ */
+void clk_get_rate_range(struct clk *clk, unsigned long *min, unsigned long *max)
+{
+	if (!clk || !min || !max)
+		return;
+
+	clk_prepare_lock();
+	clk_core_get_boundaries(clk->core, min, max);
+	clk_prepare_unlock();
+}
+EXPORT_SYMBOL_GPL(clk_get_rate_range);
+
 /**
  * clk_get_parent - return the parent of a clk
  * @clk: the clk whose parent gets returned
diff --git a/include/linux/clk.h b/include/linux/clk.h
index 39faa54efe88..1507d5147898 100644
--- a/include/linux/clk.h
+++ b/include/linux/clk.h
@@ -713,6 +713,17 @@ bool clk_has_parent(struct clk *clk, struct clk *parent);
  */
 int clk_set_rate_range(struct clk *clk, unsigned long min, unsigned long max);
 
+/**
+ * clk_get_rate_range - returns the clock rate range for a clock source
+ * @clk: clock source
+ * @min: Pointer to the variable that will hold the minimum
+ * @max: Pointer to the variable that will hold the maximum
+ *
+ * Fills the @min and @max variables with the minimum and maximum that
+ * the clock source can reach.
+ */
+void clk_get_rate_range(struct clk *clk, unsigned long *min, unsigned long *max);
+
 /**
  * clk_set_min_rate - set a minimum clock rate for a clock source
  * @clk: clock source
@@ -908,6 +919,16 @@ static inline int clk_set_rate_range(struct clk *clk, unsigned long min,
 	return 0;
 }
 
+static inline void clk_get_rate_range(struct clk *clk, unsigned long *min,
+				      unsigned long *max)
+{
+	if (!min || !max)
+		return;
+
+	*min = 0;
+	*max = ULONG_MAX;
+}
+
 static inline int clk_set_min_rate(struct clk *clk, unsigned long rate)
 {
 	return 0;
@@ -997,6 +1018,44 @@ static inline int clk_drop_range(struct clk *clk)
 	return clk_set_rate_range(clk, 0, ULONG_MAX);
 }
 
+/**
+ * clk_get_min_rate - returns the minimum clock rate for a clock source
+ * @clk: clock source
+ *
+ * Returns either the minimum clock rate in Hz that clock source can
+ * reach, or 0 on error.
+ */
+static inline unsigned long clk_get_min_rate(struct clk *clk)
+{
+	unsigned long min, max;
+
+	if (!clk)
+		return 0;
+
+	clk_get_rate_range(clk, &min, &max);
+
+	return min;
+}
+
+/**
+ * clk_get_max_rate - returns the maximum clock rate for a clock source
+ * @clk: clock source
+ *
+ * Returns either the maximum clock rate in Hz that clock source can
+ * reach, or 0 on error.
+ */
+static inline unsigned long clk_get_max_rate(struct clk *clk)
+{
+	unsigned long min, max;
+
+	if (!clk)
+		return 0;
+
+	clk_get_rate_range(clk, &min, &max);
+
+	return max;
+}
+
 /**
  * clk_get_optional - lookup and obtain a reference to an optional clock
  *		      producer.
-- 
2.36.1

[PATCH v3 04/28] drm/vc4: hdmi: Rework hdmi_enable_4kp60 detection

[Maxime Ripard]

In order to support higher HDMI frequencies, users have to set the
hdmi_enable_4kp60 parameter in their config.txt file.

We were detecting this so far by calling clk_round_rate() on the core
clock with the frequency we're supposed to run at when one of those
modes is enabled. Whether or not the parameter was enabled could then be
inferred by the returned rate since the maximum clock rate reported by
the firmware was one of the side effect of setting that parameter.

However, the recent clock rework we did changed what clk_round_rate()
was returning to always return the minimum allowed, and thus this test
wasn't reliable anymore.

Let's use the new clk_get_max_rate() function to reliably determine the
maximum rate allowed on that clock and fix the 4k@60Hz output.

Fixes: e9d6cea2af1c ("clk: bcm: rpi: Run some clocks at the minimum rate allowed")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 6aadb65eb640..962a1b9b1c4f 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -2891,7 +2891,7 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
 
 	if (variant->max_pixel_clock == 600000000) {
 		struct vc4_dev *vc4 = to_vc4_dev(drm);
-		long max_rate = clk_round_rate(vc4->hvs->core_clk, 550000000);
+		unsigned long max_rate = clk_get_max_rate(vc4->hvs->core_clk);
 
 		if (max_rate < 550000000)
 			vc4_hdmi->disable_4kp60 = true;
-- 
2.36.1

[PATCH v3 05/28] clk: Mention that .recalc_rate can return 0 on error

[Maxime Ripard]

Multiple platforms (amlogic, imx8) return 0 when the clock rate cannot
be determined properly by the recalc_rate hook. Mention in the
documentation that the framework is ok with that.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 include/linux/clk-provider.h | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index c10dc4c659e2..58e5baa49db0 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -118,8 +118,9 @@ struct clk_duty {
  *
  * @recalc_rate	Recalculate the rate of this clock, by querying hardware. The
  *		parent rate is an input parameter.  It is up to the caller to
- *		ensure that the prepare_mutex is held across this call.
- *		Returns the calculated rate.  Optional, but recommended - if
+ *		ensure that the prepare_mutex is held across this call. If the
+ *		driver cannot figure out a rate for this clock, it must return
+ *		0. Returns the calculated rate. Optional, but recommended - if
  *		this op is not set then clock rate will be initialized to 0.
  *
  * @round_rate:	Given a target rate as input, returns the closest rate actually
-- 
2.36.1

[PATCH v3 06/28] clk: Clarify clk_get_rate() expectations

[Maxime Ripard]

As shown by a number of clock users already, clk_get_rate() can be
called whether or not the clock is enabled.

Similarly, a number of clock drivers will return a rate of 0 whenever
the rate cannot be figured out.

Since it was a bit ambiguous before, let's make it clear in the
clk_get_rate() documentation.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/clk.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index c9d7016550a2..95be72f9373e 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1672,8 +1672,9 @@ static unsigned long clk_core_get_rate_recalc(struct clk_core *core)
  * @clk: the clk whose rate is being returned
  *
  * Simply returns the cached rate of the clk, unless CLK_GET_RATE_NOCACHE flag
- * is set, which means a recalc_rate will be issued.
- * If clk is NULL then returns 0.
+ * is set, which means a recalc_rate will be issued. Can be called regardless of
+ * the clock enabledness. If clk is NULL, or if an error occurred, then returns
+ * 0.
  */
 unsigned long clk_get_rate(struct clk *clk)
 {
-- 
2.36.1

[PATCH v3 07/28] clk: tests: Add test suites description

[Maxime Ripard]

We start to have a few test suites, and we'll add more, so it will get
pretty confusing to figure out what is supposed to be tested in what
suite.

Let's add some comments to explain what setup they create, and what we
should be testing in every suite.

Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/clk_test.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/drivers/clk/clk_test.c b/drivers/clk/clk_test.c
index fd2339cc5898..64ae7e210e78 100644
--- a/drivers/clk/clk_test.c
+++ b/drivers/clk/clk_test.c
@@ -250,6 +250,11 @@ static struct kunit_case clk_test_cases[] = {
 	{}
 };
 
+/*
+ * Test suite for a basic rate clock, without any parent.
+ *
+ * These tests exercise the rate API with simple scenarios
+ */
 static struct kunit_suite clk_test_suite = {
 	.name = "clk-test",
 	.init = clk_test_init,
@@ -336,6 +341,14 @@ static struct kunit_case clk_orphan_transparent_single_parent_mux_test_cases[] =
 	{}
 };
 
+/*
+ * Test suite for a basic mux clock with one parent. The parent is
+ * registered after its child. The clock will thus be an orphan when
+ * registered, but will no longer be when the tests run.
+ *
+ * These tests make sure a clock that used to be orphan has a sane,
+ * consistent, behaviour.
+ */
 static struct kunit_suite clk_orphan_transparent_single_parent_test_suite = {
 	.name = "clk-orphan-transparent-single-parent-test",
 	.init = clk_orphan_transparent_single_parent_mux_test_init,
@@ -645,6 +658,12 @@ static struct kunit_case clk_range_test_cases[] = {
 	{}
 };
 
+/*
+ * Test suite for a basic rate clock, without any parent.
+ *
+ * These tests exercise the rate range API: clk_set_rate_range(),
+ * clk_set_min_rate(), clk_set_max_rate(), clk_drop_range().
+ */
 static struct kunit_suite clk_range_test_suite = {
 	.name = "clk-range-test",
 	.init = clk_test_init,
@@ -822,6 +841,13 @@ static struct kunit_case clk_range_maximize_test_cases[] = {
 	{}
 };
 
+/*
+ * Test suite for a basic rate clock, without any parent.
+ *
+ * These tests exercise the rate range API: clk_set_rate_range(),
+ * clk_set_min_rate(), clk_set_max_rate(), clk_drop_range(), with a
+ * driver that will always try to run at the highest possible rate.
+ */
 static struct kunit_suite clk_range_maximize_test_suite = {
 	.name = "clk-range-maximize-test",
 	.init = clk_maximize_test_init,
@@ -991,6 +1017,13 @@ static struct kunit_case clk_range_minimize_test_cases[] = {
 	{}
 };
 
+/*
+ * Test suite for a basic rate clock, without any parent.
+ *
+ * These tests exercise the rate range API: clk_set_rate_range(),
+ * clk_set_min_rate(), clk_set_max_rate(), clk_drop_range(), with a
+ * driver that will always try to run at the lowest possible rate.
+ */
 static struct kunit_suite clk_range_minimize_test_suite = {
 	.name = "clk-range-minimize-test",
 	.init = clk_minimize_test_init,
-- 
2.36.1

[PATCH v3 08/28] clk: tests: Add reference to the orphan mux bug report

[Maxime Ripard]

Some more context might be useful for unit-tests covering a previously
reported bug, so let's add a link to the discussion for that bug.

Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/clk_test.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/clk/clk_test.c b/drivers/clk/clk_test.c
index 64ae7e210e78..be23c19813d0 100644
--- a/drivers/clk/clk_test.c
+++ b/drivers/clk/clk_test.c
@@ -314,6 +314,9 @@ static void clk_orphan_transparent_single_parent_mux_test_exit(struct kunit *tes
 /*
  * Test that a mux-only clock, with an initial rate within a range,
  * will still have the same rate after the range has been enforced.
+ *
+ * See:
+ * https://lore.kernel.org/linux-clk/7720158d-10a7-a17b-73a4-a8615c9c6d5c@collabora.com/
  */
 static void clk_test_orphan_transparent_parent_mux_set_range(struct kunit *test)
 {
-- 
2.36.1

[PATCH v3 09/28] clk: tests: Add tests for uncached clock

[Maxime Ripard]

The clock framework supports clocks that can have their rate changed
without the kernel knowing about it using the CLK_GET_RATE_NOCACHE flag.

As its name suggests, this flag turns off the rate caching in the clock
framework, reading out the rate from the hardware any time we need to
read it.

Let's add a couple of tests to make sure it works as intended.

Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/clk_test.c | 88 +++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 87 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/clk_test.c b/drivers/clk/clk_test.c
index be23c19813d0..429e96796c66 100644
--- a/drivers/clk/clk_test.c
+++ b/drivers/clk/clk_test.c
@@ -262,6 +262,91 @@ static struct kunit_suite clk_test_suite = {
 	.test_cases = clk_test_cases,
 };
 
+static int clk_uncached_test_init(struct kunit *test)
+{
+	struct clk_dummy_context *ctx;
+	int ret;
+
+	ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+	test->priv = ctx;
+
+	ctx->rate = DUMMY_CLOCK_INIT_RATE;
+	ctx->hw.init = CLK_HW_INIT_NO_PARENT("test-clk",
+					     &clk_dummy_rate_ops,
+					     CLK_GET_RATE_NOCACHE);
+
+	ret = clk_hw_register(NULL, &ctx->hw);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+/*
+ * Test that for an uncached clock, the clock framework doesn't cache
+ * the rate and clk_get_rate() will return the underlying clock rate
+ * even if it changed.
+ */
+static void clk_test_uncached_get_rate(struct kunit *test)
+{
+	struct clk_dummy_context *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk;
+	unsigned long rate;
+
+	rate = clk_get_rate(clk);
+	KUNIT_ASSERT_GT(test, rate, 0);
+	KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_INIT_RATE);
+
+	ctx->rate = DUMMY_CLOCK_RATE_1;
+	rate = clk_get_rate(clk);
+	KUNIT_ASSERT_GT(test, rate, 0);
+	KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
+}
+
+/*
+ * Test that for an uncached clock, clk_set_rate_range() will work
+ * properly if the rate hasn't changed.
+ */
+static void clk_test_uncached_set_range(struct kunit *test)
+{
+	struct clk_dummy_context *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk;
+	unsigned long rate;
+
+	KUNIT_ASSERT_EQ(test,
+			clk_set_rate_range(clk,
+					   DUMMY_CLOCK_RATE_1,
+					   DUMMY_CLOCK_RATE_2),
+			0);
+
+	rate = clk_get_rate(clk);
+	KUNIT_ASSERT_GT(test, rate, 0);
+	KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1);
+	KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2);
+}
+
+static struct kunit_case clk_uncached_test_cases[] = {
+	KUNIT_CASE(clk_test_uncached_get_rate),
+	KUNIT_CASE(clk_test_uncached_set_range),
+	{}
+};
+
+/*
+ * Test suite for a basic, uncached, rate clock, without any parent.
+ *
+ * These tests exercise the rate API with simple scenarios
+ */
+static struct kunit_suite clk_uncached_test_suite = {
+	.name = "clk-uncached-test",
+	.init = clk_uncached_test_init,
+	.exit = clk_test_exit,
+	.test_cases = clk_uncached_test_cases,
+};
+
 struct clk_single_parent_ctx {
 	struct clk_dummy_context parent_ctx;
 	struct clk_hw hw;
@@ -1039,6 +1124,7 @@ kunit_test_suites(
 	&clk_orphan_transparent_single_parent_test_suite,
 	&clk_range_test_suite,
 	&clk_range_maximize_test_suite,
-	&clk_range_minimize_test_suite
+	&clk_range_minimize_test_suite,
+	&clk_uncached_test_suite
 );
 MODULE_LICENSE("GPL v2");
-- 
2.36.1

[PATCH v3 10/28] clk: tests: Add tests for single parent mux

[Maxime Ripard]

We have a few tests for a mux with a single parent, testing the case
where it used to be orphan.

Let's leverage most of the code but register the clock properly to test
a few trivial things.

Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/clk_test.c | 186 +++++++++++++++++++++++++++++++++++++++--
 1 file changed, 177 insertions(+), 9 deletions(-)

diff --git a/drivers/clk/clk_test.c b/drivers/clk/clk_test.c
index 429e96796c66..87f581c2e1e1 100644
--- a/drivers/clk/clk_test.c
+++ b/drivers/clk/clk_test.c
@@ -352,6 +352,181 @@ struct clk_single_parent_ctx {
 	struct clk_hw hw;
 };
 
+static int clk_single_parent_mux_test_init(struct kunit *test)
+{
+	struct clk_single_parent_ctx *ctx;
+	int ret;
+
+	ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+	test->priv = ctx;
+
+	ctx->parent_ctx.rate = DUMMY_CLOCK_INIT_RATE;
+	ctx->parent_ctx.hw.init =
+		CLK_HW_INIT_NO_PARENT("parent-clk",
+				      &clk_dummy_rate_ops,
+				      0);
+
+	ret = clk_hw_register(NULL, &ctx->parent_ctx.hw);
+	if (ret)
+		return ret;
+
+	ctx->hw.init = CLK_HW_INIT("test-clk", "parent-clk",
+				   &clk_dummy_single_parent_ops,
+				   CLK_SET_RATE_PARENT);
+
+	ret = clk_hw_register(NULL, &ctx->hw);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static void
+clk_single_parent_mux_test_exit(struct kunit *test)
+{
+	struct clk_single_parent_ctx *ctx = test->priv;
+
+	clk_hw_unregister(&ctx->hw);
+	clk_hw_unregister(&ctx->parent_ctx.hw);
+}
+
+/*
+ * Test that for a clock with a single parent, clk_get_parent() actually
+ * returns the parent.
+ */
+static void
+clk_test_single_parent_mux_get_parent(struct kunit *test)
+{
+	struct clk_single_parent_ctx *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk;
+	struct clk *parent;
+
+	parent = clk_get_parent(clk);
+	KUNIT_EXPECT_TRUE(test, clk_is_match(parent, ctx->parent_ctx.hw.clk));
+}
+
+/*
+ * Test that for a clock that can't modify its rate and with a single
+ * parent, if we set disjoints range on the parent and then the child,
+ * the second will return an error.
+ *
+ * FIXME: clk_set_rate_range() only considers the current clock when
+ * evaluating whether ranges are disjoints and not the upstream clocks
+ * ranges.
+ */
+static void
+clk_test_single_parent_mux_set_range_disjoint_child_last(struct kunit *test)
+{
+	struct clk_single_parent_ctx *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk;
+	struct clk *parent;
+	int ret;
+
+	kunit_skip(test, "This needs to be fixed in the core.");
+
+	parent = clk_get_parent(clk);
+	KUNIT_ASSERT_PTR_NE(test, parent, NULL);
+
+	ret = clk_set_rate_range(parent, 1000, 2000);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	ret = clk_set_rate_range(clk, 3000, 4000);
+	KUNIT_EXPECT_LT(test, ret, 0);
+}
+
+/*
+ * Test that for a clock that can't modify its rate and with a single
+ * parent, if we set disjoints range on the child and then the parent,
+ * the second will return an error.
+ *
+ * FIXME: clk_set_rate_range() only considers the current clock when
+ * evaluating whether ranges are disjoints and not the downstream clocks
+ * ranges.
+ */
+static void
+clk_test_single_parent_mux_set_range_disjoint_parent_last(struct kunit *test)
+{
+	struct clk_single_parent_ctx *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk;
+	struct clk *parent;
+	int ret;
+
+	kunit_skip(test, "This needs to be fixed in the core.");
+
+	parent = clk_get_parent(clk);
+	KUNIT_ASSERT_PTR_NE(test, parent, NULL);
+
+	ret = clk_set_rate_range(clk, 1000, 2000);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	ret = clk_set_rate_range(parent, 3000, 4000);
+	KUNIT_EXPECT_LT(test, ret, 0);
+}
+
+/*
+ * Test that for a clock that can't modify its rate and with a single
+ * parent, if we set a range on the parent and a more restrictive one on
+ * the child, and then call clk_round_rate(), the boundaries of the
+ * two clocks are taken into account.
+ */
+static void
+clk_test_single_parent_mux_set_range_round_rate_child_smaller(struct kunit *test)
+{
+	struct clk_single_parent_ctx *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk;
+	struct clk *parent;
+	unsigned long rate;
+	int ret;
+
+	parent = clk_get_parent(clk);
+	KUNIT_ASSERT_PTR_NE(test, parent, NULL);
+
+	ret = clk_set_rate_range(parent, DUMMY_CLOCK_RATE_1, DUMMY_CLOCK_RATE_2);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	ret = clk_set_rate_range(clk, DUMMY_CLOCK_RATE_1 + 1000, DUMMY_CLOCK_RATE_2 - 1000);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_1 - 1000);
+	KUNIT_ASSERT_GT(test, rate, 0);
+	KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1 + 1000);
+	KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2 - 1000);
+
+	rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_2 + 1000);
+	KUNIT_ASSERT_GT(test, rate, 0);
+	KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1 + 1000);
+	KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2 - 1000);
+}
+
+static struct kunit_case clk_single_parent_mux_test_cases[] = {
+	KUNIT_CASE(clk_test_single_parent_mux_get_parent),
+	KUNIT_CASE(clk_test_single_parent_mux_set_range_disjoint_child_last),
+	KUNIT_CASE(clk_test_single_parent_mux_set_range_disjoint_parent_last),
+	KUNIT_CASE(clk_test_single_parent_mux_set_range_round_rate_child_smaller),
+	{}
+};
+
+/*
+ * Test suite for a basic mux clock with one parent, with
+ * CLK_SET_RATE_PARENT on the child.
+ *
+ * These tests exercise the consumer API and check that the state of the
+ * child and parent are sane and consistent.
+ */
+static struct kunit_suite
+clk_single_parent_mux_test_suite = {
+	.name = "clk-single-parent-mux-test",
+	.init = clk_single_parent_mux_test_init,
+	.exit = clk_single_parent_mux_test_exit,
+	.test_cases = clk_single_parent_mux_test_cases,
+};
+
 static int clk_orphan_transparent_single_parent_mux_test_init(struct kunit *test)
 {
 	struct clk_single_parent_ctx *ctx;
@@ -388,14 +563,6 @@ static int clk_orphan_transparent_single_parent_mux_test_init(struct kunit *test
 	return 0;
 }
 
-static void clk_orphan_transparent_single_parent_mux_test_exit(struct kunit *test)
-{
-	struct clk_single_parent_ctx *ctx = test->priv;
-
-	clk_hw_unregister(&ctx->hw);
-	clk_hw_unregister(&ctx->parent_ctx.hw);
-}
-
 /*
  * Test that a mux-only clock, with an initial rate within a range,
  * will still have the same rate after the range has been enforced.
@@ -440,7 +607,7 @@ static struct kunit_case clk_orphan_transparent_single_parent_mux_test_cases[] =
 static struct kunit_suite clk_orphan_transparent_single_parent_test_suite = {
 	.name = "clk-orphan-transparent-single-parent-test",
 	.init = clk_orphan_transparent_single_parent_mux_test_init,
-	.exit = clk_orphan_transparent_single_parent_mux_test_exit,
+	.exit = clk_single_parent_mux_test_exit,
 	.test_cases = clk_orphan_transparent_single_parent_mux_test_cases,
 };
 
@@ -1125,6 +1292,7 @@ kunit_test_suites(
 	&clk_range_test_suite,
 	&clk_range_maximize_test_suite,
 	&clk_range_minimize_test_suite,
+	&clk_single_parent_mux_test_suite,
 	&clk_uncached_test_suite
 );
 MODULE_LICENSE("GPL v2");
-- 
2.36.1

[PATCH v3 11/28] clk: tests: Add tests for mux with multiple parents

[Maxime Ripard]

We'll need to test a few corner cases that occur when we have a mux
clock whose default parent is missing.

For now, let's create the context structure and the trivial ops, along
with a test suite that just tests trivial things for now, without
considering the orphan case.

Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/clk_test.c | 119 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 119 insertions(+)

diff --git a/drivers/clk/clk_test.c b/drivers/clk/clk_test.c
index 87f581c2e1e1..26468fb24819 100644
--- a/drivers/clk/clk_test.c
+++ b/drivers/clk/clk_test.c
@@ -108,6 +108,39 @@ static const struct clk_ops clk_dummy_single_parent_ops = {
 	.get_parent = clk_dummy_single_get_parent,
 };
 
+struct clk_multiple_parent_ctx {
+	struct clk_dummy_context parents_ctx[2];
+	struct clk_hw hw;
+	u8 current_parent;
+};
+
+static int clk_multiple_parents_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct clk_multiple_parent_ctx *ctx =
+		container_of(hw, struct clk_multiple_parent_ctx, hw);
+
+	if (index >= clk_hw_get_num_parents(hw))
+		return -EINVAL;
+
+	ctx->current_parent = index;
+
+	return 0;
+}
+
+static u8 clk_multiple_parents_mux_get_parent(struct clk_hw *hw)
+{
+	struct clk_multiple_parent_ctx *ctx =
+		container_of(hw, struct clk_multiple_parent_ctx, hw);
+
+	return ctx->current_parent;
+}
+
+static const struct clk_ops clk_multiple_parents_mux_ops = {
+	.get_parent = clk_multiple_parents_mux_get_parent,
+	.set_parent = clk_multiple_parents_mux_set_parent,
+	.determine_rate = __clk_mux_determine_rate_closest,
+};
+
 static int clk_test_init_with_ops(struct kunit *test, const struct clk_ops *ops)
 {
 	struct clk_dummy_context *ctx;
@@ -347,6 +380,91 @@ static struct kunit_suite clk_uncached_test_suite = {
 	.test_cases = clk_uncached_test_cases,
 };
 
+static int
+clk_multiple_parents_mux_test_init(struct kunit *test)
+{
+	struct clk_multiple_parent_ctx *ctx;
+	const char *parents[2] = { "parent-0", "parent-1"};
+	int ret;
+
+	ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+	test->priv = ctx;
+
+	ctx->parents_ctx[0].hw.init = CLK_HW_INIT_NO_PARENT("parent-0",
+							    &clk_dummy_rate_ops,
+							    0);
+	ctx->parents_ctx[0].rate = DUMMY_CLOCK_RATE_1;
+	ret = clk_hw_register(NULL, &ctx->parents_ctx[0].hw);
+	if (ret)
+		return ret;
+
+	ctx->parents_ctx[1].hw.init = CLK_HW_INIT_NO_PARENT("parent-1",
+							    &clk_dummy_rate_ops,
+							    0);
+	ctx->parents_ctx[1].rate = DUMMY_CLOCK_RATE_2;
+	ret = clk_hw_register(NULL, &ctx->parents_ctx[1].hw);
+	if (ret)
+		return ret;
+
+	ctx->current_parent = 0;
+	ctx->hw.init = CLK_HW_INIT_PARENTS("test-mux", parents,
+					   &clk_multiple_parents_mux_ops,
+					   CLK_SET_RATE_PARENT);
+	ret = clk_hw_register(NULL, &ctx->hw);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static void
+clk_multiple_parents_mux_test_exit(struct kunit *test)
+{
+	struct clk_multiple_parent_ctx *ctx = test->priv;
+
+	clk_hw_unregister(&ctx->hw);
+	clk_hw_unregister(&ctx->parents_ctx[0].hw);
+	clk_hw_unregister(&ctx->parents_ctx[1].hw);
+}
+
+/*
+ * Test that for a clock with multiple parents, clk_get_parent()
+ * actually returns the current one.
+ */
+static void
+clk_test_multiple_parents_mux_get_parent(struct kunit *test)
+{
+	struct clk_multiple_parent_ctx *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk;
+	struct clk *parent;
+
+	parent = clk_get_parent(clk);
+	KUNIT_EXPECT_TRUE(test, clk_is_match(parent, ctx->parents_ctx[0].hw.clk));
+}
+
+static struct kunit_case clk_multiple_parents_mux_test_cases[] = {
+	KUNIT_CASE(clk_test_multiple_parents_mux_get_parent),
+	{}
+};
+
+/*
+ * Test suite for a basic mux clock with two parents, with
+ * CLK_SET_RATE_PARENT on the child.
+ *
+ * These tests exercise the consumer API and check that the state of the
+ * child and parents are sane and consistent.
+ */
+static struct kunit_suite
+clk_multiple_parents_mux_test_suite = {
+	.name = "clk-multiple-parents-mux-test",
+	.init = clk_multiple_parents_mux_test_init,
+	.exit = clk_multiple_parents_mux_test_exit,
+	.test_cases = clk_multiple_parents_mux_test_cases,
+};
+
 struct clk_single_parent_ctx {
 	struct clk_dummy_context parent_ctx;
 	struct clk_hw hw;
@@ -1288,6 +1406,7 @@ static struct kunit_suite clk_range_minimize_test_suite = {
 
 kunit_test_suites(
 	&clk_test_suite,
+	&clk_multiple_parents_mux_test_suite,
 	&clk_orphan_transparent_single_parent_test_suite,
 	&clk_range_test_suite,
 	&clk_range_maximize_test_suite,
-- 
2.36.1

[PATCH v3 12/28] clk: tests: Add some tests for orphan with multiple parents

[Maxime Ripard]

Let's leverage the dummy mux with multiple parents we have to create a
mux whose default parent will never be registered, and thus will always
be orphan by default.

We can then create some tests to make sure that the clock API behaves
properly in such a case, and that the transition to a non-orphan clock
when we change the parent is done properly.

Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/clk_test.c | 210 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 210 insertions(+)

diff --git a/drivers/clk/clk_test.c b/drivers/clk/clk_test.c
index 26468fb24819..8de6339f4f8d 100644
--- a/drivers/clk/clk_test.c
+++ b/drivers/clk/clk_test.c
@@ -465,6 +465,215 @@ clk_multiple_parents_mux_test_suite = {
 	.test_cases = clk_multiple_parents_mux_test_cases,
 };
 
+static int
+clk_orphan_transparent_multiple_parent_mux_test_init(struct kunit *test)
+{
+	struct clk_multiple_parent_ctx *ctx;
+	const char *parents[2] = { "missing-parent", "proper-parent"};
+	int ret;
+
+	ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+	test->priv = ctx;
+
+	ctx->parents_ctx[1].hw.init = CLK_HW_INIT_NO_PARENT("proper-parent",
+							    &clk_dummy_rate_ops,
+							    0);
+	ctx->parents_ctx[1].rate = DUMMY_CLOCK_INIT_RATE;
+	ret = clk_hw_register(NULL, &ctx->parents_ctx[1].hw);
+	if (ret)
+		return ret;
+
+	ctx->hw.init = CLK_HW_INIT_PARENTS("test-orphan-mux", parents,
+					   &clk_multiple_parents_mux_ops,
+					   CLK_SET_RATE_PARENT);
+	ret = clk_hw_register(NULL, &ctx->hw);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static void
+clk_orphan_transparent_multiple_parent_mux_test_exit(struct kunit *test)
+{
+	struct clk_multiple_parent_ctx *ctx = test->priv;
+
+	clk_hw_unregister(&ctx->hw);
+	clk_hw_unregister(&ctx->parents_ctx[1].hw);
+}
+
+/*
+ * Test that, for a mux whose current parent hasn't been registered yet,
+ * calling clk_set_parent() to a valid parent will properly update the
+ * mux parent and its orphan status.
+ */
+static void
+clk_test_orphan_transparent_multiple_parent_mux_set_parent(struct kunit *test)
+{
+	struct clk_multiple_parent_ctx *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk;
+	struct clk *parent, *new_parent;
+	int ret;
+
+	parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent);
+
+	ret = clk_set_parent(clk, parent);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	new_parent = clk_get_parent(clk);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent);
+	KUNIT_EXPECT_TRUE(test, clk_is_match(parent, new_parent));
+
+	clk_put(parent);
+}
+
+/*
+ * Test that, for a mux that started orphan but got switched to a valid
+ * parent, the rate of the mux and its new parent are consistent.
+ */
+static void
+clk_test_orphan_transparent_multiple_parent_mux_set_parent_get_rate(struct kunit *test)
+{
+	struct clk_multiple_parent_ctx *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk;
+	struct clk *parent;
+	unsigned long parent_rate, rate;
+	int ret;
+
+	parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent);
+
+	parent_rate = clk_get_rate(parent);
+	KUNIT_ASSERT_GT(test, parent_rate, 0);
+
+	ret = clk_set_parent(clk, parent);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	rate = clk_get_rate(clk);
+	KUNIT_ASSERT_GT(test, rate, 0);
+	KUNIT_EXPECT_EQ(test, parent_rate, rate);
+}
+
+/*
+ * Test that, for a mux that started orphan but got switched to a valid
+ * parent, calling clk_set_rate_range() will affect the parent state if
+ * its rate is out of range.
+ */
+static void
+clk_test_orphan_transparent_multiple_parent_mux_set_parent_set_range_modified(struct kunit *test)
+{
+	struct clk_multiple_parent_ctx *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk, *parent;
+	unsigned long rate;
+	int ret;
+
+	parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent);
+
+	ret = clk_set_parent(clk, parent);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	ret = clk_set_rate_range(clk, DUMMY_CLOCK_RATE_1, DUMMY_CLOCK_RATE_2);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	rate = clk_get_rate(clk);
+	KUNIT_ASSERT_GT(test, rate, 0);
+	KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1);
+	KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2);
+
+	clk_put(parent);
+}
+
+/*
+ * Test that, for a mux whose current parent hasn't been registered yet,
+ * calling clk_set_rate_range() will succeed, and will be taken into
+ * account when rounding a rate.
+ */
+static void
+clk_test_orphan_transparent_multiple_parent_mux_set_range_round_rate(struct kunit *test)
+{
+	struct clk_multiple_parent_ctx *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk;
+	unsigned long rate;
+	int ret;
+
+	ret = clk_set_rate_range(clk, DUMMY_CLOCK_RATE_1, DUMMY_CLOCK_RATE_2);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_1 - 1000);
+	KUNIT_ASSERT_GT(test, rate, 0);
+	KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1);
+	KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2);
+}
+
+/*
+ * Test that, for a mux that started orphan, was assigned and rate and
+ * then got switched to a valid parent, its rate is eventually within
+ * range.
+ *
+ * FIXME: Even though we update the rate as part of clk_set_parent(), we
+ * don't evaluate whether that new rate is within range and needs to be
+ * adjusted.
+ */
+static void
+clk_test_orphan_transparent_multiple_parent_mux_set_range_set_parent_get_rate(struct kunit *test)
+{
+	struct clk_multiple_parent_ctx *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk, *parent;
+	unsigned long rate;
+	int ret;
+
+	kunit_skip(test, "This needs to be fixed in the core.");
+
+	clk_hw_set_rate_range(hw, DUMMY_CLOCK_RATE_1, DUMMY_CLOCK_RATE_2);
+
+	parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent);
+
+	ret = clk_set_parent(clk, parent);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	rate = clk_get_rate(clk);
+	KUNIT_ASSERT_GT(test, rate, 0);
+	KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1);
+	KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2);
+
+	clk_put(parent);
+}
+
+static struct kunit_case clk_orphan_transparent_multiple_parent_mux_test_cases[] = {
+	KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_parent),
+	KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_parent_get_rate),
+	KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_parent_set_range_modified),
+	KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_range_round_rate),
+	KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_range_set_parent_get_rate),
+	{}
+};
+
+/*
+ * Test suite for a basic mux clock with two parents. The default parent
+ * isn't registered, only the second parent is. By default, the clock
+ * will thus be orphan.
+ *
+ * These tests exercise the behaviour of the consumer API when dealing
+ * with an orphan clock, and how we deal with the transition to a valid
+ * parent.
+ */
+static struct kunit_suite clk_orphan_transparent_multiple_parent_mux_test_suite = {
+	.name = "clk-orphan-transparent-multiple-parent-mux-test",
+	.init = clk_orphan_transparent_multiple_parent_mux_test_init,
+	.exit = clk_orphan_transparent_multiple_parent_mux_test_exit,
+	.test_cases = clk_orphan_transparent_multiple_parent_mux_test_cases,
+};
+
 struct clk_single_parent_ctx {
 	struct clk_dummy_context parent_ctx;
 	struct clk_hw hw;
@@ -1407,6 +1616,7 @@ static struct kunit_suite clk_range_minimize_test_suite = {
 kunit_test_suites(
 	&clk_test_suite,
 	&clk_multiple_parents_mux_test_suite,
+	&clk_orphan_transparent_multiple_parent_mux_test_suite,
 	&clk_orphan_transparent_single_parent_test_suite,
 	&clk_range_test_suite,
 	&clk_range_maximize_test_suite,
-- 
2.36.1

[PATCH v3 13/28] clk: Take into account uncached clocks in clk_set_rate_range()

[Maxime Ripard]

clk_set_rate_range() will use the last requested rate for the clock when
it calls into the driver set_rate hook.

However, if CLK_GET_RATE_NOCACHE is set on that clock, the last
requested rate might not be matching the current rate of the clock. In
such a case, let's read out the rate from the hardware and use that in
our set_rate instead.

Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/clk.c      |  6 +++++-
 drivers/clk/clk_test.c | 28 ++++++++++++++++++++++++++++
 2 files changed, 33 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 95be72f9373e..09849453047c 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -2373,6 +2373,10 @@ static int clk_set_rate_range_nolock(struct clk *clk,
 		goto out;
 	}
 
+	rate = clk->core->req_rate;
+	if (clk->core->flags & CLK_GET_RATE_NOCACHE)
+		rate = clk_core_get_rate_recalc(clk->core);
+
 	/*
 	 * Since the boundaries have been changed, let's give the
 	 * opportunity to the provider to adjust the clock rate based on
@@ -2390,7 +2394,7 @@ static int clk_set_rate_range_nolock(struct clk *clk,
 	 * - the determine_rate() callback does not really check for
 	 *   this corner case when determining the rate
 	 */
-	rate = clamp(clk->core->req_rate, min, max);
+	rate = clamp(rate, min, max);
 	ret = clk_core_set_rate_nolock(clk->core, rate);
 	if (ret) {
 		/* rollback the changes */
diff --git a/drivers/clk/clk_test.c b/drivers/clk/clk_test.c
index 8de6339f4f8d..9aa5b946f324 100644
--- a/drivers/clk/clk_test.c
+++ b/drivers/clk/clk_test.c
@@ -362,9 +362,37 @@ static void clk_test_uncached_set_range(struct kunit *test)
 	KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2);
 }
 
+/*
+ * Test that for an uncached clock, clk_set_rate_range() will work
+ * properly if the rate has changed in hardware.
+ *
+ * In this case, it means that if the rate wasn't initially in the range
+ * we're trying to set, but got changed at some point into the range
+ * without the kernel knowing about it, its rate shouldn't be affected.
+ */
+static void clk_test_uncached_updated_rate_set_range(struct kunit *test)
+{
+	struct clk_dummy_context *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk;
+	unsigned long rate;
+
+	ctx->rate = DUMMY_CLOCK_RATE_1 + 1000;
+	KUNIT_ASSERT_EQ(test,
+			clk_set_rate_range(clk,
+					   DUMMY_CLOCK_RATE_1,
+					   DUMMY_CLOCK_RATE_2),
+			0);
+
+	rate = clk_get_rate(clk);
+	KUNIT_ASSERT_GT(test, rate, 0);
+	KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1 + 1000);
+}
+
 static struct kunit_case clk_uncached_test_cases[] = {
 	KUNIT_CASE(clk_test_uncached_get_rate),
 	KUNIT_CASE(clk_test_uncached_set_range),
+	KUNIT_CASE(clk_test_uncached_updated_rate_set_range),
 	{}
 };
 
-- 
2.36.1

[PATCH v3 14/28] clk: Fix clk_get_parent() documentation

[Maxime Ripard]

The clk_get_parent() documentation in the header states that it will
return a valid pointer, or an error pointer on failure.

However, the documentation in the source file, and the code itself, will
return also return NULL if there isn't any parent for that clock. Let's
mention it.

An orphan clock should return NULL too, so let's add a test for it.

Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/clk_test.c | 17 +++++++++++++++++
 include/linux/clk.h    |  5 +++--
 2 files changed, 20 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/clk_test.c b/drivers/clk/clk_test.c
index 9aa5b946f324..c52098e463d3 100644
--- a/drivers/clk/clk_test.c
+++ b/drivers/clk/clk_test.c
@@ -532,6 +532,22 @@ clk_orphan_transparent_multiple_parent_mux_test_exit(struct kunit *test)
 	clk_hw_unregister(&ctx->parents_ctx[1].hw);
 }
 
+/*
+ * Test that, for a mux whose current parent hasn't been registered yet,
+ * clk_get_parent() will return NULL.
+ */
+static void
+clk_test_orphan_transparent_multiple_parent_mux_get_parent(struct kunit *test)
+{
+	struct clk_multiple_parent_ctx *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk;
+	struct clk *parent;
+
+	parent = clk_get_parent(clk);
+	KUNIT_EXPECT_PTR_EQ(test, parent, NULL);
+}
+
 /*
  * Test that, for a mux whose current parent hasn't been registered yet,
  * calling clk_set_parent() to a valid parent will properly update the
@@ -678,6 +694,7 @@ clk_test_orphan_transparent_multiple_parent_mux_set_range_set_parent_get_rate(st
 }
 
 static struct kunit_case clk_orphan_transparent_multiple_parent_mux_test_cases[] = {
+	KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_get_parent),
 	KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_parent),
 	KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_parent_get_rate),
 	KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_parent_set_range_modified),
diff --git a/include/linux/clk.h b/include/linux/clk.h
index 1507d5147898..39710b8453fa 100644
--- a/include/linux/clk.h
+++ b/include/linux/clk.h
@@ -755,8 +755,9 @@ int clk_set_parent(struct clk *clk, struct clk *parent);
  * clk_get_parent - get the parent clock source for this clock
  * @clk: clock source
  *
- * Returns struct clk corresponding to parent clock source, or
- * valid IS_ERR() condition containing errno.
+ * Returns struct clk corresponding to parent clock source, a NULL
+ * pointer if it doesn't have a parent, or a valid IS_ERR() condition
+ * containing errno.
  */
 struct clk *clk_get_parent(struct clk *clk);
 
-- 
2.36.1

[PATCH v3 15/28] clk: Set req_rate on reparenting

[Maxime Ripard]

If a non-rate clock started by default with a parent that never
registered, core->req_rate will be 0. The expectation is that whenever
the parent will be registered, req_rate will be updated with the new
value that has just been computed.

However, if that clock is a mux, clk_set_parent() can also make that
clock no longer orphan. In this case however, we never update req_rate.
Let's make sure it's the case for the newly unorphan clock and all its
children.

Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/clk.c      |  18 ++++
 drivers/clk/clk_test.c | 231 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 249 insertions(+)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 09849453047c..263c893d3b09 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1765,6 +1765,23 @@ static void clk_core_update_orphan_status(struct clk_core *core, bool is_orphan)
 		clk_core_update_orphan_status(child, is_orphan);
 }
 
+/*
+ * Update the orphan rate and req_rate of @core and all its children.
+ */
+static void clk_core_update_orphan_child_rates(struct clk_core *core)
+{
+	struct clk_core *child;
+	unsigned long parent_rate = 0;
+
+	if (core->parent)
+		parent_rate = core->parent->rate;
+
+	core->rate = core->req_rate = clk_recalc(core, parent_rate);
+
+	hlist_for_each_entry(child, &core->children, child_node)
+		clk_core_update_orphan_child_rates(child);
+}
+
 static void clk_reparent(struct clk_core *core, struct clk_core *new_parent)
 {
 	bool was_orphan = core->orphan;
@@ -1789,6 +1806,7 @@ static void clk_reparent(struct clk_core *core, struct clk_core *new_parent)
 	}
 
 	core->parent = new_parent;
+	clk_core_update_orphan_child_rates(core);
 }
 
 static struct clk_core *__clk_set_parent_before(struct clk_core *core,
diff --git a/drivers/clk/clk_test.c b/drivers/clk/clk_test.c
index c52098e463d3..4c71c6570021 100644
--- a/drivers/clk/clk_test.c
+++ b/drivers/clk/clk_test.c
@@ -575,6 +575,39 @@ clk_test_orphan_transparent_multiple_parent_mux_set_parent(struct kunit *test)
 	clk_put(parent);
 }
 
+/*
+ * Test that, for a mux that started orphan but got switched to a valid
+ * parent, calling clk_drop_range() on the mux won't affect the parent
+ * rate.
+ */
+static void
+clk_test_orphan_transparent_multiple_parent_mux_set_parent_drop_range(struct kunit *test)
+{
+	struct clk_multiple_parent_ctx *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk, *parent;
+	unsigned long parent_rate, new_parent_rate;
+	int ret;
+
+	parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent);
+
+	parent_rate = clk_get_rate(parent);
+	KUNIT_ASSERT_GT(test, parent_rate, 0);
+
+	ret = clk_set_parent(clk, parent);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	ret = clk_drop_range(clk);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	new_parent_rate = clk_get_rate(clk);
+	KUNIT_ASSERT_GT(test, new_parent_rate, 0);
+	KUNIT_EXPECT_EQ(test, parent_rate, new_parent_rate);
+
+	clk_put(parent);
+}
+
 /*
  * Test that, for a mux that started orphan but got switched to a valid
  * parent, the rate of the mux and its new parent are consistent.
@@ -603,6 +636,39 @@ clk_test_orphan_transparent_multiple_parent_mux_set_parent_get_rate(struct kunit
 	KUNIT_EXPECT_EQ(test, parent_rate, rate);
 }
 
+/*
+ * Test that, for a mux that started orphan but got switched to a valid
+ * parent, calling clk_put() on the mux won't affect the parent rate.
+ */
+static void
+clk_test_orphan_transparent_multiple_parent_mux_set_parent_put(struct kunit *test)
+{
+	struct clk_multiple_parent_ctx *ctx = test->priv;
+	struct clk *clk, *parent;
+	unsigned long parent_rate, new_parent_rate;
+	int ret;
+
+	parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent);
+
+	clk = clk_hw_get_clk(&ctx->hw, NULL);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, clk);
+
+	parent_rate = clk_get_rate(parent);
+	KUNIT_ASSERT_GT(test, parent_rate, 0);
+
+	ret = clk_set_parent(clk, parent);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	clk_put(clk);
+
+	new_parent_rate = clk_get_rate(parent);
+	KUNIT_ASSERT_GT(test, new_parent_rate, 0);
+	KUNIT_EXPECT_EQ(test, parent_rate, new_parent_rate);
+
+	clk_put(parent);
+}
+
 /*
  * Test that, for a mux that started orphan but got switched to a valid
  * parent, calling clk_set_rate_range() will affect the parent state if
@@ -634,6 +700,41 @@ clk_test_orphan_transparent_multiple_parent_mux_set_parent_set_range_modified(st
 	clk_put(parent);
 }
 
+/*
+ * Test that, for a mux that started orphan but got switched to a valid
+ * parent, calling clk_set_rate_range() won't affect the parent state if
+ * its rate is within range.
+ */
+static void
+clk_test_orphan_transparent_multiple_parent_mux_set_parent_set_range_untouched(struct kunit *test)
+{
+	struct clk_multiple_parent_ctx *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk, *parent;
+	unsigned long parent_rate, new_parent_rate;
+	int ret;
+
+	parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent);
+
+	parent_rate = clk_get_rate(parent);
+	KUNIT_ASSERT_GT(test, parent_rate, 0);
+
+	ret = clk_set_parent(clk, parent);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	ret = clk_set_rate_range(clk,
+				 DUMMY_CLOCK_INIT_RATE - 1000,
+				 DUMMY_CLOCK_INIT_RATE + 1000);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	new_parent_rate = clk_get_rate(parent);
+	KUNIT_ASSERT_GT(test, new_parent_rate, 0);
+	KUNIT_EXPECT_EQ(test, parent_rate, new_parent_rate);
+
+	clk_put(parent);
+}
+
 /*
  * Test that, for a mux whose current parent hasn't been registered yet,
  * calling clk_set_rate_range() will succeed, and will be taken into
@@ -696,8 +797,11 @@ clk_test_orphan_transparent_multiple_parent_mux_set_range_set_parent_get_rate(st
 static struct kunit_case clk_orphan_transparent_multiple_parent_mux_test_cases[] = {
 	KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_get_parent),
 	KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_parent),
+	KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_parent_drop_range),
 	KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_parent_get_rate),
+	KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_parent_put),
 	KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_parent_set_range_modified),
+	KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_parent_set_range_untouched),
 	KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_range_round_rate),
 	KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_range_set_parent_get_rate),
 	{}
@@ -983,6 +1087,132 @@ static struct kunit_suite clk_orphan_transparent_single_parent_test_suite = {
 	.test_cases = clk_orphan_transparent_single_parent_mux_test_cases,
 };
 
+struct clk_single_parent_two_lvl_ctx {
+	struct clk_dummy_context parent_parent_ctx;
+	struct clk_dummy_context parent_ctx;
+	struct clk_hw hw;
+};
+
+static int
+clk_orphan_two_level_root_last_test_init(struct kunit *test)
+{
+	struct clk_single_parent_two_lvl_ctx *ctx;
+	int ret;
+
+	ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+	test->priv = ctx;
+
+	ctx->parent_ctx.hw.init =
+		CLK_HW_INIT("intermediate-parent",
+			    "root-parent",
+			    &clk_dummy_single_parent_ops,
+			    CLK_SET_RATE_PARENT);
+	ret = clk_hw_register(NULL, &ctx->parent_ctx.hw);
+	if (ret)
+		return ret;
+
+	ctx->hw.init =
+		CLK_HW_INIT("test-clk", "intermediate-parent",
+			    &clk_dummy_single_parent_ops,
+			    CLK_SET_RATE_PARENT);
+	ret = clk_hw_register(NULL, &ctx->hw);
+	if (ret)
+		return ret;
+
+	ctx->parent_parent_ctx.rate = DUMMY_CLOCK_INIT_RATE;
+	ctx->parent_parent_ctx.hw.init =
+		CLK_HW_INIT_NO_PARENT("root-parent",
+				      &clk_dummy_rate_ops,
+				      0);
+	ret = clk_hw_register(NULL, &ctx->parent_parent_ctx.hw);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static void
+clk_orphan_two_level_root_last_test_exit(struct kunit *test)
+{
+	struct clk_single_parent_two_lvl_ctx *ctx = test->priv;
+
+	clk_hw_unregister(&ctx->hw);
+	clk_hw_unregister(&ctx->parent_ctx.hw);
+	clk_hw_unregister(&ctx->parent_parent_ctx.hw);
+}
+
+/*
+ * Test that, for a clock whose parent used to be orphan, clk_get_rate()
+ * will return the proper rate.
+ */
+static void
+clk_orphan_two_level_root_last_test_get_rate(struct kunit *test)
+{
+	struct clk_single_parent_two_lvl_ctx *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk;
+	unsigned long rate;
+
+	rate = clk_get_rate(clk);
+	KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_INIT_RATE);
+}
+
+/*
+ * Test that, for a clock whose parent used to be orphan,
+ * clk_set_rate_range() won't affect its rate if it is already within
+ * range.
+ *
+ * See (for Exynos 4210):
+ * https://lore.kernel.org/linux-clk/366a0232-bb4a-c357-6aa8-636e398e05eb@samsung.com/
+ */
+static void
+clk_orphan_two_level_root_last_test_set_range(struct kunit *test)
+{
+	struct clk_single_parent_two_lvl_ctx *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk;
+	unsigned long rate;
+	int ret;
+
+	ret = clk_set_rate_range(clk,
+				 DUMMY_CLOCK_INIT_RATE - 1000,
+				 DUMMY_CLOCK_INIT_RATE + 1000);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	rate = clk_get_rate(clk);
+	KUNIT_ASSERT_GT(test, rate, 0);
+	KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_INIT_RATE);
+}
+
+static struct kunit_case
+clk_orphan_two_level_root_last_test_cases[] = {
+	KUNIT_CASE(clk_orphan_two_level_root_last_test_get_rate),
+	KUNIT_CASE(clk_orphan_two_level_root_last_test_set_range),
+	{}
+};
+
+/*
+ * Test suite for a basic, transparent, clock with a parent that is also
+ * such a clock. The parent's parent is registered last, while the
+ * parent and its child are registered in that order. The intermediate
+ * and leaf clocks will thus be orphan when registered, but the leaf
+ * clock itself will always have its parent and will never be
+ * reparented. Indeed, it's only orphan because its parent is.
+ *
+ * These tests exercise the behaviour of the consumer API when dealing
+ * with an orphan clock, and how we deal with the transition to a valid
+ * parent.
+ */
+static struct kunit_suite
+clk_orphan_two_level_root_last_test_suite = {
+	.name = "clk-orphan-two-level-root-last-test",
+	.init = clk_orphan_two_level_root_last_test_init,
+	.exit = clk_orphan_two_level_root_last_test_exit,
+	.test_cases = clk_orphan_two_level_root_last_test_cases,
+};
+
 /*
  * Test that clk_set_rate_range won't return an error for a valid range
  * and that it will make sure the rate of the clock is within the
@@ -1663,6 +1893,7 @@ kunit_test_suites(
 	&clk_multiple_parents_mux_test_suite,
 	&clk_orphan_transparent_multiple_parent_mux_test_suite,
 	&clk_orphan_transparent_single_parent_test_suite,
+	&clk_orphan_two_level_root_last_test_suite,
 	&clk_range_test_suite,
 	&clk_range_maximize_test_suite,
 	&clk_range_minimize_test_suite,
-- 
2.36.1

[PATCH v3 16/28] clk: Change clk_core_init_rate_req prototype

[Maxime Ripard]

The expectation is that a clk_rate_request structure is supposed to be
initialized using clk_core_init_rate_req(), yet the rate we want to
request still needs to be set by hand.

Let's just pass the rate as a function argument so that callers don't
have any extra work to do.

Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/clk.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 263c893d3b09..ad8fca2bdf27 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1380,13 +1380,16 @@ static int clk_core_determine_round_nolock(struct clk_core *core,
 }
 
 static void clk_core_init_rate_req(struct clk_core * const core,
-				   struct clk_rate_request *req)
+				   struct clk_rate_request *req,
+				   unsigned long rate)
 {
 	struct clk_core *parent;
 
 	if (WARN_ON(!core || !req))
 		return;
 
+	req->rate = rate;
+
 	parent = core->parent;
 	if (parent) {
 		req->best_parent_hw = parent->hw;
@@ -1412,7 +1415,7 @@ static int clk_core_round_rate_nolock(struct clk_core *core,
 		return 0;
 	}
 
-	clk_core_init_rate_req(core, req);
+	clk_core_init_rate_req(core, req, req->rate);
 
 	if (clk_core_can_round(core))
 		return clk_core_determine_round_nolock(core, req);
@@ -2001,11 +2004,10 @@ static struct clk_core *clk_calc_new_rates(struct clk_core *core,
 	if (clk_core_can_round(core)) {
 		struct clk_rate_request req;
 
-		req.rate = rate;
 		req.min_rate = min_rate;
 		req.max_rate = max_rate;
 
-		clk_core_init_rate_req(core, &req);
+		clk_core_init_rate_req(core, &req, rate);
 
 		ret = clk_core_determine_round_nolock(core, &req);
 		if (ret < 0)
-- 
2.36.1

[PATCH v3 17/28] clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller

[Maxime Ripard]

The clk_rate_request structure is used internally as an argument for
the clk_core_determine_round_nolock() and clk_core_round_rate_nolock().

In both cases, the clk_core_init_rate_req() function is used to
initialize the clk_rate_request structure.

However, the expectation on who gets to call that function is
inconsistent between those two functions. Indeed,
clk_core_determine_round_nolock() will assume the structure is properly
initialized and will just use it.

On the other hand, clk_core_round_rate_nolock() will call
clk_core_init_rate_req() itself, expecting the caller to have filled
only a minimal set of parameters (rate, min_rate and max_rate).

If we ignore the calling convention inconsistency, this leads to a
second inconsistency for drivers:

   * If they get called by the framework through
     clk_core_round_rate_nolock(), the rate, min_rate and max_rate
     fields will be filled by the caller, and the best_parent_rate and
     best_parent_hw fields will get filled by clk_core_init_rate_req().

   * If they get called by a driver through __clk_determine_rate (and
     thus clk_core_round_rate_nolock), only best_parent_rate and
     best_parent_hw are being explicitly set by the framework. Even
     though we can reasonably expect rate to be set, only one of the 6
     in-tree users explicitly set min_rate and max_rate.

   * If they get called by the framework through
     clk_core_determine_round_nolock(), then we have two callpaths.
     Either it will be called by clk_core_round_rate_nolock() itself, or
     it will be called by clk_calc_new_rates(), which will properly
     initialize rate, min_rate, max_rate itself, and best_parent_rate
     and best_parent_hw through clk_core_init_rate_req().

Even though the first and third case seems equivalent, they aren't when
the clock has CLK_SET_RATE_PARENT. Indeed, in such a case
clk_core_round_rate_nolock() will call itself on the current parent
clock with the same clk_rate_request structure.

The clk_core_init_rate_req() function will then be called on the parent
clock, with the child clk_rate_request pointer and will fill the
best_parent_rate and best_parent_hw fields with the parent context.

When the whole recursion stops and the call returns, the initial caller
will end up with a clk_rate_request structure with some informations of
the child clock (rate, min_rate, max_rate) and some others of the last
clock up the tree whose child had CLK_SET_RATE_PARENT (best_parent_hw,
best_parent_rate).

In the most common case, best_parent_rate is going to be equal on all
the parent clocks so it's not a big deal. However, best_parent_hw is
going to point to a clock that never has been a valid parent for that
clock which is definitely confusing.

In order to fix the calling inconsistency, let's move the
clk_core_init_rate_req() calls to the callers, which will also help a
bit with the clk_core_round_rate_nolock() recursion.

Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/clk.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index ad8fca2bdf27..e5ebcfcfe4eb 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1415,8 +1415,6 @@ static int clk_core_round_rate_nolock(struct clk_core *core,
 		return 0;
 	}
 
-	clk_core_init_rate_req(core, req, req->rate);
-
 	if (clk_core_can_round(core))
 		return clk_core_determine_round_nolock(core, req);
 	else if (core->flags & CLK_SET_RATE_PARENT)
@@ -1464,8 +1462,8 @@ unsigned long clk_hw_round_rate(struct clk_hw *hw, unsigned long rate)
 	int ret;
 	struct clk_rate_request req;
 
+	clk_core_init_rate_req(hw->core, &req, rate);
 	clk_core_get_boundaries(hw->core, &req.min_rate, &req.max_rate);
-	req.rate = rate;
 
 	ret = clk_core_round_rate_nolock(hw->core, &req);
 	if (ret)
@@ -1497,8 +1495,8 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
 	if (clk->exclusive_count)
 		clk_core_rate_unprotect(clk->core);
 
+	clk_core_init_rate_req(clk->core, &req, rate);
 	clk_core_get_boundaries(clk->core, &req.min_rate, &req.max_rate);
-	req.rate = rate;
 
 	ret = clk_core_round_rate_nolock(clk->core, &req);
 
@@ -2206,8 +2204,8 @@ static unsigned long clk_core_req_round_rate_nolock(struct clk_core *core,
 	if (cnt < 0)
 		return cnt;
 
+	clk_core_init_rate_req(core, &req, req_rate);
 	clk_core_get_boundaries(core, &req.min_rate, &req.max_rate);
-	req.rate = req_rate;
 
 	ret = clk_core_round_rate_nolock(core, &req);
 
-- 
2.36.1

[PATCH v3 18/28] clk: Introduce clk_hw_init_rate_request()

[Maxime Ripard]

clk-divider instantiates clk_rate_request internally for its round_rate
implementations to share the code with its determine_rate
implementations.

However, it's missing a few fields (min_rate, max_rate) that would be
initialized properly if it was using clk_core_init_rate_req().

Let's create the clk_hw_init_rate_request() function for clock providers
to be able to share the code to instation clk_rate_requests with the
framework. This will also be useful for some tests introduced in later
patches.

Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/clk-divider.c    | 20 ++++++++++----------
 drivers/clk/clk.c            | 20 ++++++++++++++++++++
 include/linux/clk-provider.h |  6 ++++++
 3 files changed, 36 insertions(+), 10 deletions(-)

diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index f6b2bf558486..a2c2b5203b0a 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -386,13 +386,13 @@ long divider_round_rate_parent(struct clk_hw *hw, struct clk_hw *parent,
 			       const struct clk_div_table *table,
 			       u8 width, unsigned long flags)
 {
-	struct clk_rate_request req = {
-		.rate = rate,
-		.best_parent_rate = *prate,
-		.best_parent_hw = parent,
-	};
+	struct clk_rate_request req;
 	int ret;
 
+	clk_hw_init_rate_request(hw, &req, rate);
+	req.best_parent_rate = *prate;
+	req.best_parent_hw = parent;
+
 	ret = divider_determine_rate(hw, &req, table, width, flags);
 	if (ret)
 		return ret;
@@ -408,13 +408,13 @@ long divider_ro_round_rate_parent(struct clk_hw *hw, struct clk_hw *parent,
 				  const struct clk_div_table *table, u8 width,
 				  unsigned long flags, unsigned int val)
 {
-	struct clk_rate_request req = {
-		.rate = rate,
-		.best_parent_rate = *prate,
-		.best_parent_hw = parent,
-	};
+	struct clk_rate_request req;
 	int ret;
 
+	clk_hw_init_rate_request(hw, &req, rate);
+	req.best_parent_rate = *prate;
+	req.best_parent_hw = parent;
+
 	ret = divider_ro_determine_rate(hw, &req, table, width, flags, val);
 	if (ret)
 		return ret;
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index e5ebcfcfe4eb..8952c5c71af2 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1400,6 +1400,26 @@ static void clk_core_init_rate_req(struct clk_core * const core,
 	}
 }
 
+/**
+ * clk_hw_init_rate_request - Initializes a clk_rate_request
+ * @hw: the clk for which we want to submit a rate request
+ * @req: the clk_rate_request structure we want to initialise
+ * @rate: the rate which is to be requested
+ *
+ * Initializes a clk_rate_request structure to submit to
+ * __clk_determine_rate() or similar functions.
+ */
+void clk_hw_init_rate_request(const struct clk_hw *hw,
+			      struct clk_rate_request *req,
+			      unsigned long rate)
+{
+	if (WARN_ON(!hw || !req))
+		return;
+
+	clk_core_init_rate_req(hw->core, req, rate);
+}
+EXPORT_SYMBOL_GPL(clk_hw_init_rate_request);
+
 static bool clk_core_can_round(struct clk_core * const core)
 {
 	return core->ops->determine_rate || core->ops->round_rate;
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 58e5baa49db0..c8f25924fa05 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -42,6 +42,8 @@ struct dentry;
  * struct clk_rate_request - Structure encoding the clk constraints that
  * a clock user might require.
  *
+ * Should be initialized by calling clk_hw_init_rate_request().
+ *
  * @rate:		Requested clock rate. This field will be adjusted by
  *			clock drivers according to hardware capabilities.
  * @min_rate:		Minimum rate imposed by clk users.
@@ -60,6 +62,10 @@ struct clk_rate_request {
 	struct clk_hw *best_parent_hw;
 };
 
+void clk_hw_init_rate_request(const struct clk_hw *hw,
+			      struct clk_rate_request *req,
+			      unsigned long rate);
+
 /**
  * struct clk_duty - Struture encoding the duty cycle ratio of a clock
  *
-- 
2.36.1

[PATCH v3 19/28] clk: Add our request boundaries in clk_core_init_rate_req

[Maxime Ripard]

The expectation is that a new clk_rate_request is initialized through a
call to clk_core_init_rate_req().

However, at the moment it only fills the parent rate and clk_hw pointer,
but omits the other fields such as the clock rate boundaries.

Some users of that function will update them after calling it, but most
don't.

As we are passed the clk_core pointer, we have access to those
boundaries in clk_core_init_rate_req() however, so let's just fill it
there and remove it from the few callers that do it right.

Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/clk.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 8952c5c71af2..3a94d3e76f59 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1389,6 +1389,7 @@ static void clk_core_init_rate_req(struct clk_core * const core,
 		return;
 
 	req->rate = rate;
+	clk_core_get_boundaries(core, &req->min_rate, &req->max_rate);
 
 	parent = core->parent;
 	if (parent) {
@@ -1483,7 +1484,6 @@ unsigned long clk_hw_round_rate(struct clk_hw *hw, unsigned long rate)
 	struct clk_rate_request req;
 
 	clk_core_init_rate_req(hw->core, &req, rate);
-	clk_core_get_boundaries(hw->core, &req.min_rate, &req.max_rate);
 
 	ret = clk_core_round_rate_nolock(hw->core, &req);
 	if (ret)
@@ -1516,7 +1516,6 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
 		clk_core_rate_unprotect(clk->core);
 
 	clk_core_init_rate_req(clk->core, &req, rate);
-	clk_core_get_boundaries(clk->core, &req.min_rate, &req.max_rate);
 
 	ret = clk_core_round_rate_nolock(clk->core, &req);
 
@@ -2022,9 +2021,6 @@ static struct clk_core *clk_calc_new_rates(struct clk_core *core,
 	if (clk_core_can_round(core)) {
 		struct clk_rate_request req;
 
-		req.min_rate = min_rate;
-		req.max_rate = max_rate;
-
 		clk_core_init_rate_req(core, &req, rate);
 
 		ret = clk_core_determine_round_nolock(core, &req);
@@ -2225,7 +2221,6 @@ static unsigned long clk_core_req_round_rate_nolock(struct clk_core *core,
 		return cnt;
 
 	clk_core_init_rate_req(core, &req, req_rate);
-	clk_core_get_boundaries(core, &req.min_rate, &req.max_rate);
 
 	ret = clk_core_round_rate_nolock(core, &req);
 
-- 
2.36.1

[PATCH v3 20/28] clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock

[Maxime Ripard]

clk_mux_determine_rate_flags() will call into __clk_determine_rate()
with a clk_hw pointer, while it has access to the clk_core pointer
already.

This leads to back and forth between clk_hw and clk_core, while
__clk_determine_rate will only call clk_core_round_rate_nolock() with
the clk_core pointer it retrieved from the clk_hw.

Let's simplify things a bit by calling into clk_core_round_rate_nolock
directly.

Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/clk.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 3a94d3e76f59..1a217c21be48 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -536,6 +536,9 @@ static bool mux_is_better_rate(unsigned long rate, unsigned long now,
 	return now <= rate && now > best;
 }
 
+static int clk_core_round_rate_nolock(struct clk_core *core,
+				      struct clk_rate_request *req);
+
 int clk_mux_determine_rate_flags(struct clk_hw *hw,
 				 struct clk_rate_request *req,
 				 unsigned long flags)
@@ -549,8 +552,12 @@ int clk_mux_determine_rate_flags(struct clk_hw *hw,
 	if (core->flags & CLK_SET_RATE_NO_REPARENT) {
 		parent = core->parent;
 		if (core->flags & CLK_SET_RATE_PARENT) {
-			ret = __clk_determine_rate(parent ? parent->hw : NULL,
-						   &parent_req);
+			if (!parent) {
+				req->rate = 0;
+				return 0;
+			}
+
+			ret = clk_core_round_rate_nolock(parent, &parent_req);
 			if (ret)
 				return ret;
 
@@ -573,7 +580,7 @@ int clk_mux_determine_rate_flags(struct clk_hw *hw,
 
 		if (core->flags & CLK_SET_RATE_PARENT) {
 			parent_req = *req;
-			ret = __clk_determine_rate(parent->hw, &parent_req);
+			ret = clk_core_round_rate_nolock(parent, &parent_req);
 			if (ret)
 				continue;
 		} else {
-- 
2.36.1

[PATCH v3 21/28] clk: Introduce clk_core_has_parent()

[Maxime Ripard]

We will need to know if a clk_core pointer has a given parent in other
functions, so let's create a clk_core_has_parent() function that
clk_has_parent() will call into.

For good measure, let's add some unit tests as well to make sure it
works properly.

Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/clk.c      | 36 +++++++++++++++++++++---------------
 drivers/clk/clk_test.c | 32 ++++++++++++++++++++++++++++++++
 2 files changed, 53 insertions(+), 15 deletions(-)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 1a217c21be48..7754a5140a6b 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -539,6 +539,26 @@ static bool mux_is_better_rate(unsigned long rate, unsigned long now,
 static int clk_core_round_rate_nolock(struct clk_core *core,
 				      struct clk_rate_request *req);
 
+static bool clk_core_has_parent(struct clk_core *core, struct clk_core *parent)
+{
+	unsigned int i;
+
+	/* Optimize for the case where the parent is already the parent. */
+	if (core == parent)
+		return true;
+
+	for (i = 0; i < core->num_parents; i++) {
+		struct clk_core *tmp = clk_core_get_parent_by_index(core, i);
+		if (!tmp)
+			continue;
+
+		if (tmp == parent)
+			return true;
+	}
+
+	return false;
+}
+
 int clk_mux_determine_rate_flags(struct clk_hw *hw,
 				 struct clk_rate_request *req,
 				 unsigned long flags)
@@ -2590,25 +2610,11 @@ void clk_hw_reparent(struct clk_hw *hw, struct clk_hw *new_parent)
  */
 bool clk_has_parent(struct clk *clk, struct clk *parent)
 {
-	struct clk_core *core, *parent_core;
-	int i;
-
 	/* NULL clocks should be nops, so return success if either is NULL. */
 	if (!clk || !parent)
 		return true;
 
-	core = clk->core;
-	parent_core = parent->core;
-
-	/* Optimize for the case where the parent is already the parent. */
-	if (core->parent == parent_core)
-		return true;
-
-	for (i = 0; i < core->num_parents; i++)
-		if (!strcmp(core->parents[i].name, parent_core->name))
-			return true;
-
-	return false;
+	return clk_core_has_parent(clk->core, parent->core);
 }
 EXPORT_SYMBOL_GPL(clk_has_parent);
 
diff --git a/drivers/clk/clk_test.c b/drivers/clk/clk_test.c
index 4c71c6570021..7e1a231a5a6b 100644
--- a/drivers/clk/clk_test.c
+++ b/drivers/clk/clk_test.c
@@ -473,8 +473,24 @@ clk_test_multiple_parents_mux_get_parent(struct kunit *test)
 	KUNIT_EXPECT_TRUE(test, clk_is_match(parent, ctx->parents_ctx[0].hw.clk));
 }
 
+/*
+ * Test that for a clock with a multiple parents, clk_has_parent()
+ * actually reports all of them as parents.
+ */
+static void
+clk_test_multiple_parents_mux_has_parent(struct kunit *test)
+{
+	struct clk_multiple_parent_ctx *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk;
+
+	KUNIT_EXPECT_TRUE(test, clk_has_parent(clk, ctx->parents_ctx[0].hw.clk));
+	KUNIT_EXPECT_TRUE(test, clk_has_parent(clk, ctx->parents_ctx[1].hw.clk));
+}
+
 static struct kunit_case clk_multiple_parents_mux_test_cases[] = {
 	KUNIT_CASE(clk_test_multiple_parents_mux_get_parent),
+	KUNIT_CASE(clk_test_multiple_parents_mux_has_parent),
 	{}
 };
 
@@ -884,6 +900,21 @@ clk_test_single_parent_mux_get_parent(struct kunit *test)
 	KUNIT_EXPECT_TRUE(test, clk_is_match(parent, ctx->parent_ctx.hw.clk));
 }
 
+/*
+ * Test that for a clock with a single parent, clk_has_parent() actually
+ * reports it as a parent.
+ */
+static void
+clk_test_single_parent_mux_has_parent(struct kunit *test)
+{
+	struct clk_single_parent_ctx *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk;
+	struct clk *parent = ctx->parent_ctx.hw.clk;
+
+	KUNIT_EXPECT_TRUE(test, clk_has_parent(clk, parent));
+}
+
 /*
  * Test that for a clock that can't modify its rate and with a single
  * parent, if we set disjoints range on the parent and then the child,
@@ -982,6 +1013,7 @@ clk_test_single_parent_mux_set_range_round_rate_child_smaller(struct kunit *test
 
 static struct kunit_case clk_single_parent_mux_test_cases[] = {
 	KUNIT_CASE(clk_test_single_parent_mux_get_parent),
+	KUNIT_CASE(clk_test_single_parent_mux_has_parent),
 	KUNIT_CASE(clk_test_single_parent_mux_set_range_disjoint_child_last),
 	KUNIT_CASE(clk_test_single_parent_mux_set_range_disjoint_parent_last),
 	KUNIT_CASE(clk_test_single_parent_mux_set_range_round_rate_child_smaller),
-- 
2.36.1

[PATCH v3 22/28] clk: Stop forwarding clk_rate_requests to the parent

[Maxime Ripard]

If the clock cannot modify its rate and has CLK_SET_RATE_PARENT,
clk_mux_determine_rate_flags(), clk_core_round_rate_nolock() and a
number of drivers will forward the clk_rate_request to the parent clock.

clk_core_round_rate_nolock() will pass the pointer directly, which means
that we pass a clk_rate_request to the parent that has the rate,
min_rate and max_rate of the child, and the best_parent_rate and
best_parent_hw fields will be relative to the child as well, so will
point to our current clock and its rate. The most common case for
CLK_SET_RATE_PARENT is that the child and parent clock rates will be
equal, so the rate field isn't a worry, but the other fields are.

Similarly, if the parent clock driver ever modifies the best_parent_rate
or best_parent_hw, this will be applied to the child once the call to
clk_core_round_rate_nolock() is done. best_parent_hw is probably not
going to be a valid parent, and best_parent_rate might lead to a parent
rate change different to the one that was initially computed.

clk_mux_determine_rate_flags() and the affected drivers will copy the
request before forwarding it to the parents, so they won't be affected
by the latter issue, but the former is still going to be there and will
lead to erroneous data and context being passed to the various clock
drivers in the same sub-tree.

Let's create two new functions, clk_core_forward_rate_req() and
clk_hw_forward_rate_request() for the framework and the clock providers
that will copy a request from a child clock and update the context to
match the parent's. We also update the relevant call sites in the
framework and drivers to use that new function.

Let's also add a test to make sure we avoid regressions there.

Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/at91/clk-generated.c  |   4 +-
 drivers/clk/at91/clk-master.c     |   9 +-
 drivers/clk/at91/clk-peripheral.c |   4 +-
 drivers/clk/clk-composite.c       |   6 +-
 drivers/clk/clk.c                 |  84 ++++++++++++--
 drivers/clk/clk_test.c            | 176 ++++++++++++++++++++++++++++++
 include/linux/clk-provider.h      |   5 +
 7 files changed, 273 insertions(+), 15 deletions(-)

diff --git a/drivers/clk/at91/clk-generated.c b/drivers/clk/at91/clk-generated.c
index 23cc8297ec4c..178df87e429d 100644
--- a/drivers/clk/at91/clk-generated.c
+++ b/drivers/clk/at91/clk-generated.c
@@ -132,7 +132,6 @@ static int clk_generated_determine_rate(struct clk_hw *hw,
 {
 	struct clk_generated *gck = to_clk_generated(hw);
 	struct clk_hw *parent = NULL;
-	struct clk_rate_request req_parent = *req;
 	long best_rate = -EINVAL;
 	unsigned long min_rate, parent_rate;
 	int best_diff = -1;
@@ -188,6 +187,9 @@ static int clk_generated_determine_rate(struct clk_hw *hw,
 		goto end;
 
 	for (div = 1; div < GENERATED_MAX_DIV + 2; div++) {
+		struct clk_rate_request req_parent;
+
+		clk_hw_forward_rate_request(hw, parent, req, &req_parent);
 		req_parent.rate = req->rate * div;
 		if (__clk_determine_rate(parent, &req_parent))
 			continue;
diff --git a/drivers/clk/at91/clk-master.c b/drivers/clk/at91/clk-master.c
index 164e2959c7cf..b7cd1924de52 100644
--- a/drivers/clk/at91/clk-master.c
+++ b/drivers/clk/at91/clk-master.c
@@ -581,7 +581,6 @@ static int clk_sama7g5_master_determine_rate(struct clk_hw *hw,
 					     struct clk_rate_request *req)
 {
 	struct clk_master *master = to_clk_master(hw);
-	struct clk_rate_request req_parent = *req;
 	struct clk_hw *parent;
 	long best_rate = LONG_MIN, best_diff = LONG_MIN;
 	unsigned long parent_rate;
@@ -618,11 +617,15 @@ static int clk_sama7g5_master_determine_rate(struct clk_hw *hw,
 		goto end;
 
 	for (div = 0; div < MASTER_PRES_MAX + 1; div++) {
+		struct clk_rate_request req_parent;
+		unsigned long req_rate;
+
 		if (div == MASTER_PRES_MAX)
-			req_parent.rate = req->rate * 3;
+			req_rate = req->rate * 3;
 		else
-			req_parent.rate = req->rate << div;
+			req_rate = req->rate << div;
 
+		clk_hw_forward_rate_request(hw, req, parent, &req_parent, req_rate);
 		if (__clk_determine_rate(parent, &req_parent))
 			continue;
 
diff --git a/drivers/clk/at91/clk-peripheral.c b/drivers/clk/at91/clk-peripheral.c
index e14fa5ac734c..5104d4025484 100644
--- a/drivers/clk/at91/clk-peripheral.c
+++ b/drivers/clk/at91/clk-peripheral.c
@@ -269,7 +269,6 @@ static int clk_sam9x5_peripheral_determine_rate(struct clk_hw *hw,
 {
 	struct clk_sam9x5_peripheral *periph = to_clk_sam9x5_peripheral(hw);
 	struct clk_hw *parent = clk_hw_get_parent(hw);
-	struct clk_rate_request req_parent = *req;
 	unsigned long parent_rate = clk_hw_get_rate(parent);
 	unsigned long tmp_rate;
 	long best_rate = LONG_MIN;
@@ -302,8 +301,9 @@ static int clk_sam9x5_peripheral_determine_rate(struct clk_hw *hw,
 		goto end;
 
 	for (shift = 0; shift <= PERIPHERAL_MAX_SHIFT; shift++) {
-		req_parent.rate = req->rate << shift;
+		struct clk_rate_request req_parent;
 
+		clk_hw_forward_rate_request(hw, req, parent, &req_parent, req->rate << shift);
 		if (__clk_determine_rate(parent, &req_parent))
 			continue;
 
diff --git a/drivers/clk/clk-composite.c b/drivers/clk/clk-composite.c
index b9c5f904f535..edfa94641bbf 100644
--- a/drivers/clk/clk-composite.c
+++ b/drivers/clk/clk-composite.c
@@ -85,10 +85,11 @@ static int clk_composite_determine_rate(struct clk_hw *hw,
 		req->best_parent_hw = NULL;
 
 		if (clk_hw_get_flags(hw) & CLK_SET_RATE_NO_REPARENT) {
-			struct clk_rate_request tmp_req = *req;
+			struct clk_rate_request tmp_req;
 
 			parent = clk_hw_get_parent(mux_hw);
 
+			clk_hw_forward_rate_request(hw, req, parent, &tmp_req, req->rate);
 			ret = clk_composite_determine_rate_for_parent(rate_hw,
 								      &tmp_req,
 								      parent,
@@ -104,12 +105,13 @@ static int clk_composite_determine_rate(struct clk_hw *hw,
 		}
 
 		for (i = 0; i < clk_hw_get_num_parents(mux_hw); i++) {
-			struct clk_rate_request tmp_req = *req;
+			struct clk_rate_request tmp_req;
 
 			parent = clk_hw_get_parent_by_index(mux_hw, i);
 			if (!parent)
 				continue;
 
+			clk_hw_forward_rate_request(hw, req, parent, &tmp_req, req->rate);
 			ret = clk_composite_determine_rate_for_parent(rate_hw,
 								      &tmp_req,
 								      parent,
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 7754a5140a6b..75927377a2c2 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -536,6 +536,10 @@ static bool mux_is_better_rate(unsigned long rate, unsigned long now,
 	return now <= rate && now > best;
 }
 
+static void clk_core_init_rate_req(struct clk_core * const core,
+				   struct clk_rate_request *req,
+				   unsigned long rate);
+
 static int clk_core_round_rate_nolock(struct clk_core *core,
 				      struct clk_rate_request *req);
 
@@ -559,6 +563,25 @@ static bool clk_core_has_parent(struct clk_core *core, struct clk_core *parent)
 	return false;
 }
 
+static void
+clk_core_forward_rate_req(struct clk_core * const core,
+			  struct clk_rate_request * const old_req,
+			  struct clk_core * const parent,
+			  struct clk_rate_request *req,
+			  unsigned long parent_rate)
+{
+	if (WARN_ON(!clk_core_has_parent(core, parent)))
+		return;
+
+	clk_core_init_rate_req(parent, req, parent_rate);
+
+	if (req->min_rate < old_req->min_rate)
+		req->min_rate = old_req->min_rate;
+
+	if (req->max_rate > old_req->max_rate)
+		req->max_rate = old_req->max_rate;
+}
+
 int clk_mux_determine_rate_flags(struct clk_hw *hw,
 				 struct clk_rate_request *req,
 				 unsigned long flags)
@@ -566,17 +589,19 @@ int clk_mux_determine_rate_flags(struct clk_hw *hw,
 	struct clk_core *core = hw->core, *parent, *best_parent = NULL;
 	int i, num_parents, ret;
 	unsigned long best = 0;
-	struct clk_rate_request parent_req = *req;
 
 	/* if NO_REPARENT flag set, pass through to current parent */
 	if (core->flags & CLK_SET_RATE_NO_REPARENT) {
 		parent = core->parent;
 		if (core->flags & CLK_SET_RATE_PARENT) {
+			struct clk_rate_request parent_req;
+
 			if (!parent) {
 				req->rate = 0;
 				return 0;
 			}
 
+			clk_core_forward_rate_req(core, req, parent, &parent_req, req->rate);
 			ret = clk_core_round_rate_nolock(parent, &parent_req);
 			if (ret)
 				return ret;
@@ -594,23 +619,29 @@ int clk_mux_determine_rate_flags(struct clk_hw *hw,
 	/* find the parent that can provide the fastest rate <= rate */
 	num_parents = core->num_parents;
 	for (i = 0; i < num_parents; i++) {
+		unsigned long parent_rate;
+
 		parent = clk_core_get_parent_by_index(core, i);
 		if (!parent)
 			continue;
 
 		if (core->flags & CLK_SET_RATE_PARENT) {
-			parent_req = *req;
+			struct clk_rate_request parent_req;
+
+			clk_core_forward_rate_req(core, req, parent, &parent_req, req->rate);
 			ret = clk_core_round_rate_nolock(parent, &parent_req);
 			if (ret)
 				continue;
+
+			parent_rate = parent_req.rate;
 		} else {
-			parent_req.rate = clk_core_get_rate_nolock(parent);
+			parent_rate = clk_core_get_rate_nolock(parent);
 		}
 
-		if (mux_is_better_rate(req->rate, parent_req.rate,
+		if (mux_is_better_rate(req->rate, parent_rate,
 				       best, flags)) {
 			best_parent = parent;
-			best = parent_req.rate;
+			best = parent_rate;
 		}
 	}
 
@@ -1448,6 +1479,31 @@ void clk_hw_init_rate_request(const struct clk_hw *hw,
 }
 EXPORT_SYMBOL_GPL(clk_hw_init_rate_request);
 
+/**
+ * clk_hw_forward_rate_request - Forwards a clk_rate_request to a clock's parent
+ * @hw: the original clock that got the rate request
+ * @old_req: the original clk_rate_request structure we want to forward
+ * @parent: the clk we want to forward @old_req to
+ * @req: the clk_rate_request structure we want to initialise
+ * @parent_rate: The rate which is to be requested to @parent
+ *
+ * Initializes a clk_rate_request structure to submit to a clock parent
+ * in __clk_determine_rate() or similar functions.
+ */
+void clk_hw_forward_rate_request(const struct clk_hw *hw,
+				 const struct clk_rate_request *old_req,
+				 const struct clk_hw *parent,
+				 struct clk_rate_request *req,
+				 unsigned long parent_rate)
+{
+	if (WARN_ON(!hw || !old_req || !parent || !req))
+		return;
+
+	clk_core_forward_rate_req(hw->core, old_req,
+				  parent->core, req,
+				  parent_rate);
+}
+
 static bool clk_core_can_round(struct clk_core * const core)
 {
 	return core->ops->determine_rate || core->ops->round_rate;
@@ -1456,6 +1512,8 @@ static bool clk_core_can_round(struct clk_core * const core)
 static int clk_core_round_rate_nolock(struct clk_core *core,
 				      struct clk_rate_request *req)
 {
+	int ret;
+
 	lockdep_assert_held(&prepare_lock);
 
 	if (!core) {
@@ -1465,8 +1523,20 @@ static int clk_core_round_rate_nolock(struct clk_core *core,
 
 	if (clk_core_can_round(core))
 		return clk_core_determine_round_nolock(core, req);
-	else if (core->flags & CLK_SET_RATE_PARENT)
-		return clk_core_round_rate_nolock(core->parent, req);
+
+	if (core->flags & CLK_SET_RATE_PARENT) {
+		struct clk_rate_request parent_req;
+
+		clk_core_forward_rate_req(core, req, core->parent, &parent_req, req->rate);
+		ret = clk_core_round_rate_nolock(core->parent, &parent_req);
+		if (ret)
+			return ret;
+
+		req->best_parent_rate = parent_req.rate;
+		req->rate = parent_req.rate;
+
+		return 0;
+	}
 
 	req->rate = core->rate;
 	return 0;
diff --git a/drivers/clk/clk_test.c b/drivers/clk/clk_test.c
index 7e1a231a5a6b..865457b566d4 100644
--- a/drivers/clk/clk_test.c
+++ b/drivers/clk/clk_test.c
@@ -975,6 +975,34 @@ clk_test_single_parent_mux_set_range_disjoint_parent_last(struct kunit *test)
 	KUNIT_EXPECT_LT(test, ret, 0);
 }
 
+/*
+ * Test that for a clock that can't modify its rate and with a single
+ * parent, if we set a range on the parent and then call
+ * clk_round_rate(), the boundaries of the parent are taken into
+ * account.
+ */
+static void
+clk_test_single_parent_mux_set_range_round_rate_parent_only(struct kunit *test)
+{
+	struct clk_single_parent_ctx *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk;
+	struct clk *parent;
+	unsigned long rate;
+	int ret;
+
+	parent = clk_get_parent(clk);
+	KUNIT_ASSERT_PTR_NE(test, parent, NULL);
+
+	ret = clk_set_rate_range(parent, DUMMY_CLOCK_RATE_1, DUMMY_CLOCK_RATE_2);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_1 - 1000);
+	KUNIT_ASSERT_GT(test, rate, 0);
+	KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1);
+	KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2);
+}
+
 /*
  * Test that for a clock that can't modify its rate and with a single
  * parent, if we set a range on the parent and a more restrictive one on
@@ -1011,12 +1039,50 @@ clk_test_single_parent_mux_set_range_round_rate_child_smaller(struct kunit *test
 	KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2 - 1000);
 }
 
+/*
+ * Test that for a clock that can't modify its rate and with a single
+ * parent, if we set a range on the child and a more restrictive one on
+ * the parent, and then call clk_round_rate(), the boundaries of the
+ * two clocks are taken into account.
+ */
+static void
+clk_test_single_parent_mux_set_range_round_rate_parent_smaller(struct kunit *test)
+{
+	struct clk_single_parent_ctx *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk;
+	struct clk *parent;
+	unsigned long rate;
+	int ret;
+
+	parent = clk_get_parent(clk);
+	KUNIT_ASSERT_PTR_NE(test, parent, NULL);
+
+	ret = clk_set_rate_range(parent, DUMMY_CLOCK_RATE_1 + 1000, DUMMY_CLOCK_RATE_2 - 1000);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	ret = clk_set_rate_range(clk, DUMMY_CLOCK_RATE_1, DUMMY_CLOCK_RATE_2);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_1 - 1000);
+	KUNIT_ASSERT_GT(test, rate, 0);
+	KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1 + 1000);
+	KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2 - 1000);
+
+	rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_2 + 1000);
+	KUNIT_ASSERT_GT(test, rate, 0);
+	KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1 + 1000);
+	KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2 - 1000);
+}
+
 static struct kunit_case clk_single_parent_mux_test_cases[] = {
 	KUNIT_CASE(clk_test_single_parent_mux_get_parent),
 	KUNIT_CASE(clk_test_single_parent_mux_has_parent),
 	KUNIT_CASE(clk_test_single_parent_mux_set_range_disjoint_child_last),
 	KUNIT_CASE(clk_test_single_parent_mux_set_range_disjoint_parent_last),
 	KUNIT_CASE(clk_test_single_parent_mux_set_range_round_rate_child_smaller),
+	KUNIT_CASE(clk_test_single_parent_mux_set_range_round_rate_parent_only),
+	KUNIT_CASE(clk_test_single_parent_mux_set_range_round_rate_parent_smaller),
 	{}
 };
 
@@ -1920,7 +1986,117 @@ static struct kunit_suite clk_range_minimize_test_suite = {
 	.test_cases = clk_range_minimize_test_cases,
 };
 
+struct clk_leaf_mux_ctx {
+	struct clk_multiple_parent_ctx mux_ctx;
+	struct clk_hw hw;
+};
+
+static int
+clk_leaf_mux_set_rate_parent_test_init(struct kunit *test)
+{
+	struct clk_leaf_mux_ctx *ctx;
+	const char *top_parents[2] = { "parent-0", "parent-1" };
+	int ret;
+
+	ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+	test->priv = ctx;
+
+	ctx->mux_ctx.parents_ctx[0].hw.init = CLK_HW_INIT_NO_PARENT("parent-0",
+								    &clk_dummy_rate_ops,
+								    0);
+	ctx->mux_ctx.parents_ctx[0].rate = DUMMY_CLOCK_RATE_1;
+	ret = clk_hw_register(NULL, &ctx->mux_ctx.parents_ctx[0].hw);
+	if (ret)
+		return ret;
+
+	ctx->mux_ctx.parents_ctx[1].hw.init = CLK_HW_INIT_NO_PARENT("parent-1",
+								    &clk_dummy_rate_ops,
+								    0);
+	ctx->mux_ctx.parents_ctx[1].rate = DUMMY_CLOCK_RATE_2;
+	ret = clk_hw_register(NULL, &ctx->mux_ctx.parents_ctx[1].hw);
+	if (ret)
+		return ret;
+
+	ctx->mux_ctx.current_parent = 0;
+	ctx->mux_ctx.hw.init = CLK_HW_INIT_PARENTS("test-mux", top_parents,
+						   &clk_multiple_parents_mux_ops,
+						   0);
+	ret = clk_hw_register(NULL, &ctx->mux_ctx.hw);
+	if (ret)
+		return ret;
+
+	ctx->hw.init = CLK_HW_INIT_HW("test-clock", &ctx->mux_ctx.hw,
+				      &clk_dummy_single_parent_ops,
+				      CLK_SET_RATE_PARENT);
+	ret = clk_hw_register(NULL, &ctx->hw);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static void clk_leaf_mux_set_rate_parent_test_exit(struct kunit *test)
+{
+	struct clk_leaf_mux_ctx *ctx = test->priv;
+
+	clk_hw_unregister(&ctx->hw);
+	clk_hw_unregister(&ctx->mux_ctx.hw);
+	clk_hw_unregister(&ctx->mux_ctx.parents_ctx[0].hw);
+	clk_hw_unregister(&ctx->mux_ctx.parents_ctx[1].hw);
+}
+
+/*
+ * Test that, for a clock that will forward any rate request to its
+ * parent, the rate request structure returned by __clk_determine_rate
+ * is sane and will be what we expect.
+ */
+static void clk_leaf_mux_set_rate_parent_determine_rate(struct kunit *test)
+{
+	struct clk_leaf_mux_ctx *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk;
+	struct clk_rate_request req;
+	unsigned long rate;
+	int ret;
+
+	rate = clk_get_rate(clk);
+	KUNIT_ASSERT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
+
+	clk_hw_init_rate_request(hw, &req, DUMMY_CLOCK_RATE_2);
+
+	ret = __clk_determine_rate(hw, &req);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	KUNIT_EXPECT_EQ(test, req.rate, DUMMY_CLOCK_RATE_2);
+	KUNIT_EXPECT_EQ(test, req.best_parent_rate, DUMMY_CLOCK_RATE_2);
+	KUNIT_EXPECT_PTR_EQ(test, req.best_parent_hw, &ctx->mux_ctx.hw);
+}
+
+static struct kunit_case clk_leaf_mux_set_rate_parent_test_cases[] = {
+	KUNIT_CASE(clk_leaf_mux_set_rate_parent_determine_rate),
+	{}
+};
+
+/*
+ * Test suite for a clock whose parent is a mux with multiple parents.
+ * The leaf clock has CLK_SET_RATE_PARENT, and will forward rate
+ * requests to the mux, which will then select which parent is the best
+ * fit for a given rate.
+ *
+ * These tests exercise the behaviour of muxes, and the proper selection
+ * of parents.
+  */
+static struct kunit_suite clk_leaf_mux_set_rate_parent_test_suite = {
+	.name = "clk-leaf-mux-set-rate-parent",
+	.init = clk_leaf_mux_set_rate_parent_test_init,
+	.exit = clk_leaf_mux_set_rate_parent_test_exit,
+	.test_cases = clk_leaf_mux_set_rate_parent_test_cases,
+};
+
 kunit_test_suites(
+	&clk_leaf_mux_set_rate_parent_test_suite,
 	&clk_test_suite,
 	&clk_multiple_parents_mux_test_suite,
 	&clk_orphan_transparent_multiple_parent_mux_test_suite,
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index c8f25924fa05..7f4f34ff2b83 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -65,6 +65,11 @@ struct clk_rate_request {
 void clk_hw_init_rate_request(const struct clk_hw *hw,
 			      struct clk_rate_request *req,
 			      unsigned long rate);
+void clk_hw_forward_rate_request(const struct clk_hw *core,
+				 const struct clk_rate_request *old_req,
+				 const struct clk_hw *parent,
+				 struct clk_rate_request *req,
+				 unsigned long parent_rate);
 
 /**
  * struct clk_duty - Struture encoding the duty cycle ratio of a clock
-- 
2.36.1

[PATCH v3 23/28] clk: Zero the clk_rate_request structure

[Maxime Ripard]

In order to make sure we don't carry anything over from an already
existing clk_rate_request pointer we would pass to
clk_core_init_rate_req(), let's zero the entire structure before
initializing it.

Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/clk.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 75927377a2c2..d8441e7221be 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1446,6 +1446,8 @@ static void clk_core_init_rate_req(struct clk_core * const core,
 	if (WARN_ON(!core || !req))
 		return;
 
+	memset(req, 0, sizeof(*req));
+
 	req->rate = rate;
 	clk_core_get_boundaries(core, &req->min_rate, &req->max_rate);
 
-- 
2.36.1

[PATCH v3 24/28] clk: Test the clock pointer in clk_hw_get_name()

[Maxime Ripard]

Unlike __clk_get_name(), clk_hw_get_name() doesn't test wether passed
clk_hw pointer is NULL or not and dereferences it directly. This can
then lead to NULL pointer dereference.

Let's make sure the pointer isn't NULL before dereferencing it.

Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx8mp
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> # exynos4210, meson g12b
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/clk.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index d8441e7221be..597977c883ef 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -262,7 +262,7 @@ EXPORT_SYMBOL_GPL(__clk_get_name);
 
 const char *clk_hw_get_name(const struct clk_hw *hw)
 {
-	return hw->core->name;
+	return !hw ? NULL : hw->core->name;
 }
 EXPORT_SYMBOL_GPL(clk_hw_get_name);
 
-- 
2.36.1

[PATCH v3 25/28] clk: Introduce the clk_hw_get_rate_range function

[Maxime Ripard]

Some clock providers are hand-crafting their clk_rate_request, and need
to figure out the current boundaries of their clk_hw to fill it
properly.

Let's create such a function for clock providers.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/clk.c            | 16 ++++++++++++++++
 include/linux/clk-provider.h |  2 ++
 2 files changed, 18 insertions(+)

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 597977c883ef..312ee08b00ca 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -683,6 +683,22 @@ static void clk_core_get_boundaries(struct clk_core *core,
 		*max_rate = min(*max_rate, clk_user->max_rate);
 }
 
+/*
+ * clk_hw_get_rate_range() - returns the clock rate range for a hw clk
+ * @hw: the hw clk we want to get the range from
+ * @min_rate: pointer to the variable that will hold the minimum
+ * @max_rate: pointer to the variable that will hold the maximum
+ *
+ * Fills the @min_rate and @max_rate variables with the minimum and
+ * maximum that clock can reach.
+ */
+void clk_hw_get_rate_range(struct clk_hw *hw, unsigned long *min_rate,
+			   unsigned long *max_rate)
+{
+	clk_core_get_boundaries(hw->core, min_rate, max_rate);
+}
+EXPORT_SYMBOL_GPL(clk_hw_get_rate_range);
+
 static bool clk_core_check_boundaries(struct clk_core *core,
 				      unsigned long min_rate,
 				      unsigned long max_rate)
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index 7f4f34ff2b83..c0bcf72d5ecd 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -1235,6 +1235,8 @@ int clk_mux_determine_rate_flags(struct clk_hw *hw,
 				 struct clk_rate_request *req,
 				 unsigned long flags);
 void clk_hw_reparent(struct clk_hw *hw, struct clk_hw *new_parent);
+void clk_hw_get_rate_range(struct clk_hw *hw, unsigned long *min_rate,
+			   unsigned long *max_rate);
 void clk_hw_set_rate_range(struct clk_hw *hw, unsigned long min_rate,
 			   unsigned long max_rate);
 
-- 
2.36.1

[PATCH v3 26/28] clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d

[Maxime Ripard]

The gfx3d clock is hand-crafting its own clk_rate_request in
clk_gfx3d_determine_rate to pass to the parent of that clock.

However, since the clk_rate_request is zero'd at creation, it will have
a max_rate of 0 which will break any code depending on the clock
boundaries.

That includes the recent commit 948fb0969eae ("clk: Always clamp the
rounded rate") which will clamp the rate given to clk_round_rate() to
the current clock boundaries.

For the gfx3d clock, it means that since both the min_rate and max_rate
fields are set at zero, clk_round_rate() now always return 0.

Let's initialize the min_rate and max_rate fields properly for that
clock.

Fixes: 948fb0969eae ("clk: Always clamp the rounded rate")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/qcom/clk-rcg2.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c
index e9c357309fd9..523f9830321e 100644
--- a/drivers/clk/qcom/clk-rcg2.c
+++ b/drivers/clk/qcom/clk-rcg2.c
@@ -868,6 +868,15 @@ static int clk_gfx3d_determine_rate(struct clk_hw *hw,
 		req->best_parent_hw = p2;
 	}
 
+	clk_hw_get_rate_range(req->best_parent_hw,
+			      &parent_req.min_rate, &parent_req.max_rate);
+
+	if (req->min_rate > parent_req.min_rate)
+		parent_req.min_rate = req->min_rate;
+
+	if (req->max_rate < parent_req.max_rate)
+		parent_req.max_rate = req->max_rate;
+
 	ret = __clk_determine_rate(req->best_parent_hw, &parent_req);
 	if (ret)
 		return ret;
-- 
2.36.1

[PATCH v3 27/28] clk: tests: Add some tests for clk_get_rate_range()

[Maxime Ripard]

Let's introduce a bunch of unit tests to make sure the values returned
by clk_get_rate_range() are sane.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/clk_test.c | 182 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 182 insertions(+)

diff --git a/drivers/clk/clk_test.c b/drivers/clk/clk_test.c
index 865457b566d4..b4ae6eec7758 100644
--- a/drivers/clk/clk_test.c
+++ b/drivers/clk/clk_test.c
@@ -900,6 +900,109 @@ clk_test_single_parent_mux_get_parent(struct kunit *test)
 	KUNIT_EXPECT_TRUE(test, clk_is_match(parent, ctx->parent_ctx.hw.clk));
 }
 
+/*
+ * Test that for a clock with a single parent and CLK_SET_RATE_PARENT,
+ * if we set a range on both the child clock and its parent, with a
+ * smaller range on the child, the rate range returned by
+ * clk_get_rate_range() is aggregate of both ranges.
+ */
+static void
+clk_test_single_parent_mux_get_range_both_child_smaller(struct kunit *test)
+{
+	struct clk_single_parent_ctx *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk;
+	struct clk *parent;
+	unsigned long min, max;
+	int ret;
+
+	parent = clk_get_parent(clk);
+	KUNIT_ASSERT_PTR_NE(test, parent, NULL);
+
+	ret = clk_set_rate_range(parent, DUMMY_CLOCK_RATE_1, DUMMY_CLOCK_RATE_2);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	ret = clk_set_rate_range(clk,
+				 DUMMY_CLOCK_RATE_1 + 1000,
+				 DUMMY_CLOCK_RATE_2 - 1000);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	clk_get_rate_range(clk, &min, &max);
+	KUNIT_EXPECT_EQ(test, min, DUMMY_CLOCK_RATE_1 + 1000);
+	KUNIT_EXPECT_EQ(test, max, DUMMY_CLOCK_RATE_2 - 1000);
+}
+
+/*
+ * Test that for a clock with a single parent and CLK_SET_RATE_PARENT,
+ * if we set a range on both the child clock and its parent, with a
+ * smaller range on the parent, the rate range returned by
+ * clk_get_rate_range() is aggregate of both ranges.
+ *
+ * FIXME: clk_get_rate_range() (and clk_core_get_boundaries() in
+ * particular) doesn't take the parent range into account when the clock
+ * has CLK_SET_RATE_PARENT.
+ */
+static void
+clk_test_single_parent_mux_get_range_both_parent_smaller(struct kunit *test)
+{
+	struct clk_single_parent_ctx *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk;
+	struct clk *parent;
+	unsigned long min, max;
+	int ret;
+
+	kunit_skip(test, "This needs to be fixed in the core.");
+
+	parent = clk_get_parent(clk);
+	KUNIT_ASSERT_PTR_NE(test, parent, NULL);
+
+	ret = clk_set_rate_range(parent,
+				 DUMMY_CLOCK_RATE_1 + 1000,
+				 DUMMY_CLOCK_RATE_2 - 1000);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	ret = clk_set_rate_range(clk, DUMMY_CLOCK_RATE_1, DUMMY_CLOCK_RATE_2);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	clk_get_rate_range(clk, &min, &max);
+	KUNIT_EXPECT_EQ(test, min, DUMMY_CLOCK_RATE_1 + 1000);
+	KUNIT_EXPECT_EQ(test, min, DUMMY_CLOCK_RATE_2 - 1000);
+}
+
+/*
+ * Test that for a clock with a single parent and CLK_SET_RATE_PARENT,
+ * if we set a range on the parent clock only, the rate range returned
+ * by clk_get_rate_range() on the children clock matches the parent
+ * range.
+ *
+ * FIXME: clk_get_rate_range() (and clk_core_get_boundaries() in
+ * particular) doesn't take the parent range into account when the clock
+ * has CLK_SET_RATE_PARENT.
+ */
+static void
+clk_test_single_parent_mux_get_range_parent_only(struct kunit *test)
+{
+	struct clk_single_parent_ctx *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk;
+	struct clk *parent;
+	unsigned long min, max;
+	int ret;
+
+	kunit_skip(test, "This needs to be fixed in the core.");
+
+	parent = clk_get_parent(clk);
+	KUNIT_ASSERT_PTR_NE(test, parent, NULL);
+
+	ret = clk_set_rate_range(parent, DUMMY_CLOCK_RATE_1, DUMMY_CLOCK_RATE_2);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	clk_get_rate_range(clk, &min, &max);
+	KUNIT_EXPECT_EQ(test, min, DUMMY_CLOCK_RATE_1);
+	KUNIT_EXPECT_EQ(test, min, DUMMY_CLOCK_RATE_2);
+}
+
 /*
  * Test that for a clock with a single parent, clk_has_parent() actually
  * reports it as a parent.
@@ -1077,6 +1180,9 @@ clk_test_single_parent_mux_set_range_round_rate_parent_smaller(struct kunit *tes
 
 static struct kunit_case clk_single_parent_mux_test_cases[] = {
 	KUNIT_CASE(clk_test_single_parent_mux_get_parent),
+	KUNIT_CASE(clk_test_single_parent_mux_get_range_both_child_smaller),
+	KUNIT_CASE(clk_test_single_parent_mux_get_range_both_parent_smaller),
+	KUNIT_CASE(clk_test_single_parent_mux_get_range_parent_only),
 	KUNIT_CASE(clk_test_single_parent_mux_has_parent),
 	KUNIT_CASE(clk_test_single_parent_mux_set_range_disjoint_child_last),
 	KUNIT_CASE(clk_test_single_parent_mux_set_range_disjoint_parent_last),
@@ -1311,6 +1417,79 @@ clk_orphan_two_level_root_last_test_suite = {
 	.test_cases = clk_orphan_two_level_root_last_test_cases,
 };
 
+/*
+ * Test that clk_set_rate_range() and clk_get_rate_range() are
+ * consistent on a simple clock without any parent.
+ */
+static void clk_range_test_get_range(struct kunit *test)
+{
+	struct clk_dummy_context *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk;
+	unsigned long min, max;
+	int ret;
+
+	ret = clk_set_rate_range(clk, DUMMY_CLOCK_RATE_1, DUMMY_CLOCK_RATE_2);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	clk_get_rate_range(clk, &min, &max);
+	KUNIT_EXPECT_EQ(test, min, DUMMY_CLOCK_RATE_1);
+	KUNIT_EXPECT_EQ(test, max, DUMMY_CLOCK_RATE_2);
+}
+
+/*
+ * Test that, on a simple clock without any parent, if a rate range is
+ * set on a clk, it's properly reported by clk_get_rate_range() on all
+ * the clk structure of that clock.
+ */
+static void clk_range_test_get_range_multiple_clk(struct kunit *test)
+{
+	struct clk_dummy_context *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *user1, *user2;
+	unsigned long min, max;
+	int ret;
+
+	user1 = clk_hw_get_clk(hw, NULL);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user1);
+
+	user2 = clk_hw_get_clk(hw, NULL);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user2);
+
+	ret = clk_set_rate_range(user1,
+				 DUMMY_CLOCK_RATE_1,
+				 DUMMY_CLOCK_RATE_2);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	clk_get_rate_range(user2, &min, &max);
+	KUNIT_EXPECT_EQ(test, min, DUMMY_CLOCK_RATE_1);
+	KUNIT_EXPECT_EQ(test, max, DUMMY_CLOCK_RATE_2);
+}
+
+/*
+ * Test that, on a simple clock without any parent, if a rate range is
+ * set on struct clk_hw, it's properly reported by clk_get_rate_range().
+ */
+static void clk_range_test_get_range_with_hw(struct kunit *test)
+{
+	struct clk_dummy_context *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk;
+	unsigned long min, max;
+	int ret;
+
+	clk_hw_set_rate_range(hw, DUMMY_CLOCK_RATE_1, DUMMY_CLOCK_RATE_2);
+
+	ret = clk_set_rate_range(clk,
+				 DUMMY_CLOCK_RATE_1 + 1000,
+				 DUMMY_CLOCK_RATE_2 - 1000);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	clk_get_rate_range(clk, &min, &max);
+	KUNIT_EXPECT_EQ(test, min, DUMMY_CLOCK_RATE_1 + 1000);
+	KUNIT_EXPECT_EQ(test, max, DUMMY_CLOCK_RATE_2 - 1000);
+}
+
 /*
  * Test that clk_set_rate_range won't return an error for a valid range
  * and that it will make sure the rate of the clock is within the
@@ -1599,6 +1778,9 @@ static void clk_range_test_set_range_get_rate_lowered(struct kunit *test)
 }
 
 static struct kunit_case clk_range_test_cases[] = {
+	KUNIT_CASE(clk_range_test_get_range),
+	KUNIT_CASE(clk_range_test_get_range_with_hw),
+	KUNIT_CASE(clk_range_test_get_range_multiple_clk),
 	KUNIT_CASE(clk_range_test_set_range),
 	KUNIT_CASE(clk_range_test_set_range_invalid),
 	KUNIT_CASE(clk_range_test_multiple_disjoints_range),
-- 
2.36.1

[PATCH v3 28/28] clk: tests: Add missing test case for ranges

[Maxime Ripard]

Let's add a test on the rate range after a reparenting. This fails for
now, but it's worth having it to document the corner cases we don't
support yet.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/clk/clk_test.c | 52 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)

diff --git a/drivers/clk/clk_test.c b/drivers/clk/clk_test.c
index b4ae6eec7758..8226f2c6c8a3 100644
--- a/drivers/clk/clk_test.c
+++ b/drivers/clk/clk_test.c
@@ -488,9 +488,61 @@ clk_test_multiple_parents_mux_has_parent(struct kunit *test)
 	KUNIT_EXPECT_TRUE(test, clk_has_parent(clk, ctx->parents_ctx[1].hw.clk));
 }
 
+/*
+ * Test that for a clock with a multiple parents, if we set a range on
+ * that clock and the parent is changed, its rate after the reparenting
+ * is still within the range we asked for.
+ *
+ * FIXME: clk_set_parent() only does the reparenting but doesn't
+ * reevaluate whether the new clock rate is within its boundaries or
+ * not.
+ */
+static void
+clk_test_multiple_parents_mux_set_range_set_parent_get_rate(struct kunit *test)
+{
+	struct clk_multiple_parent_ctx *ctx = test->priv;
+	struct clk_hw *hw = &ctx->hw;
+	struct clk *clk = hw->clk;
+	struct clk *parent1, *parent2;
+	unsigned long rate;
+	int ret;
+
+	kunit_skip(test, "This needs to be fixed in the core.");
+
+	parent1 = clk_hw_get_clk(&ctx->parents_ctx[0].hw, NULL);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent1);
+	KUNIT_ASSERT_TRUE(test, clk_is_match(clk_get_parent(clk), parent1));
+
+	parent2 = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent2);
+
+	ret = clk_set_rate(parent1, DUMMY_CLOCK_RATE_1);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	ret = clk_set_rate(parent2, DUMMY_CLOCK_RATE_2);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	ret = clk_set_rate_range(clk,
+				 DUMMY_CLOCK_RATE_1 - 1000,
+				 DUMMY_CLOCK_RATE_1 + 1000);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	ret = clk_set_parent(clk, parent2);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	rate = clk_get_rate(clk);
+	KUNIT_ASSERT_GT(test, rate, 0);
+	KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1 - 1000);
+	KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_1 + 1000);
+
+	clk_put(parent2);
+	clk_put(parent1);
+}
+
 static struct kunit_case clk_multiple_parents_mux_test_cases[] = {
 	KUNIT_CASE(clk_test_multiple_parents_mux_get_parent),
 	KUNIT_CASE(clk_test_multiple_parents_mux_has_parent),
+	KUNIT_CASE(clk_test_multiple_parents_mux_set_range_set_parent_get_rate),
 	{}
 };
 
-- 
2.36.1

Re: [PATCH v3 00/28] clk: More clock rate fixes and tests

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 977 bytes --]

Hi Stephen, Mike,

On Wed, May 11, 2022 at 04:42:21PM +0200, Maxime Ripard wrote:
> Thanks to the feedback I got on the previous series, I found and fixed a
> number of bugs in the clock framework and how it deals with rates,
> especially when it comes to orphan clocks.
> 
> In order to make sure this doesn't pop up again as a regression, I've
> extended the number of tests.
> 
> The first patch reintroduces the clk_set_rate_range call on clk_put, but
> this time will only do so if there was a range set on that clock to
> begin with. It should be less intrusive, and reduce the number of
> potential side effects considerably.
> 
> We then have a fix for the qcom rcg2 issue that has been reported
> recently, and two patches to address a regression with the RaspberryPi4.

Those four patches are fixing regressions in 5.18. Even though the later
patches are also fixing some issues, the first four should have your
priority over the rest.

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v3 22/28] clk: Stop forwarding clk_rate_requests to the parent

[kernel test robot]

Hi Maxime,

I love your patch! Perhaps something to improve:

[auto build test WARNING on clk/clk-next]
[also build test WARNING on linus/master v5.18-rc6 next-20220511]
[cannot apply to anholt/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/intel-lab-lkp/linux/commits/Maxime-Ripard/clk-More-clock-rate-fixes-and-tests/20220511-224533
base:   https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-next
config: nios2-defconfig (https://download.01.org/0day-ci/archive/20220512/202205120358.R563eKPN-lkp@intel.com/config)
compiler: nios2-linux-gcc (GCC) 11.3.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/intel-lab-lkp/linux/commit/32af2a918274a92da86089672d5d7adba63dc0cf
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Maxime-Ripard/clk-More-clock-rate-fixes-and-tests/20220511-224533
        git checkout 32af2a918274a92da86089672d5d7adba63dc0cf
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.3.0 make.cross W=1 O=build_dir ARCH=nios2 SHELL=/bin/bash drivers/clk/

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

   drivers/clk/clk.c: In function 'clk_hw_forward_rate_request':
>> drivers/clk/clk.c:1502:45: warning: passing argument 2 of 'clk_core_forward_rate_req' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
    1502 |         clk_core_forward_rate_req(hw->core, old_req,
         |                                             ^~~~~~~
   drivers/clk/clk.c:568:59: note: expected 'struct clk_rate_request * const' but argument is of type 'const struct clk_rate_request *'
     568 |                           struct clk_rate_request * const old_req,
         |                           ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~


vim +1502 drivers/clk/clk.c

  1481	
  1482	/**
  1483	 * clk_hw_forward_rate_request - Forwards a clk_rate_request to a clock's parent
  1484	 * @hw: the original clock that got the rate request
  1485	 * @old_req: the original clk_rate_request structure we want to forward
  1486	 * @parent: the clk we want to forward @old_req to
  1487	 * @req: the clk_rate_request structure we want to initialise
  1488	 * @parent_rate: The rate which is to be requested to @parent
  1489	 *
  1490	 * Initializes a clk_rate_request structure to submit to a clock parent
  1491	 * in __clk_determine_rate() or similar functions.
  1492	 */
  1493	void clk_hw_forward_rate_request(const struct clk_hw *hw,
  1494					 const struct clk_rate_request *old_req,
  1495					 const struct clk_hw *parent,
  1496					 struct clk_rate_request *req,
  1497					 unsigned long parent_rate)
  1498	{
  1499		if (WARN_ON(!hw || !old_req || !parent || !req))
  1500			return;
  1501	
> 1502		clk_core_forward_rate_req(hw->core, old_req,
  1503					  parent->core, req,
  1504					  parent_rate);
  1505	}
  1506	

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp

Re: [PATCH v3 22/28] clk: Stop forwarding clk_rate_requests to the parent

[kernel test robot]

Hi Maxime,

I love your patch! Perhaps something to improve:

[auto build test WARNING on clk/clk-next]
[also build test WARNING on linus/master v5.18-rc6 next-20220511]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/intel-lab-lkp/linux/commits/Maxime-Ripard/clk-More-clock-rate-fixes-and-tests/20220511-224533
base:   https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-next
config: x86_64-randconfig-a013 (https://download.01.org/0day-ci/archive/20220512/202205120339.nHwf2vT1-lkp@intel.com/config)
compiler: gcc-11 (Debian 11.2.0-20) 11.2.0
reproduce (this is a W=1 build):
        # https://github.com/intel-lab-lkp/linux/commit/32af2a918274a92da86089672d5d7adba63dc0cf
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Maxime-Ripard/clk-More-clock-rate-fixes-and-tests/20220511-224533
        git checkout 32af2a918274a92da86089672d5d7adba63dc0cf
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        make W=1 O=build_dir ARCH=x86_64 SHELL=/bin/bash drivers/clk/

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

   drivers/clk/clk.c: In function 'clk_hw_forward_rate_request':
>> drivers/clk/clk.c:1502:45: warning: passing argument 2 of 'clk_core_forward_rate_req' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]
    1502 |         clk_core_forward_rate_req(hw->core, old_req,
         |                                             ^~~~~~~
   drivers/clk/clk.c:568:59: note: expected 'struct clk_rate_request * const' but argument is of type 'const struct clk_rate_request *'
     568 |                           struct clk_rate_request * const old_req,
         |                           ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~


vim +1502 drivers/clk/clk.c

  1481	
  1482	/**
  1483	 * clk_hw_forward_rate_request - Forwards a clk_rate_request to a clock's parent
  1484	 * @hw: the original clock that got the rate request
  1485	 * @old_req: the original clk_rate_request structure we want to forward
  1486	 * @parent: the clk we want to forward @old_req to
  1487	 * @req: the clk_rate_request structure we want to initialise
  1488	 * @parent_rate: The rate which is to be requested to @parent
  1489	 *
  1490	 * Initializes a clk_rate_request structure to submit to a clock parent
  1491	 * in __clk_determine_rate() or similar functions.
  1492	 */
  1493	void clk_hw_forward_rate_request(const struct clk_hw *hw,
  1494					 const struct clk_rate_request *old_req,
  1495					 const struct clk_hw *parent,
  1496					 struct clk_rate_request *req,
  1497					 unsigned long parent_rate)
  1498	{
  1499		if (WARN_ON(!hw || !old_req || !parent || !req))
  1500			return;
  1501	
> 1502		clk_core_forward_rate_req(hw->core, old_req,
  1503					  parent->core, req,
  1504					  parent_rate);
  1505	}
  1506	

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp

Re: [PATCH v3 22/28] clk: Stop forwarding clk_rate_requests to the parent

[kernel test robot]

Hi Maxime,

I love your patch! Perhaps something to improve:

[auto build test WARNING on clk/clk-next]
[also build test WARNING on linus/master v5.18-rc6 next-20220511]
[cannot apply to anholt/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/intel-lab-lkp/linux/commits/Maxime-Ripard/clk-More-clock-rate-fixes-and-tests/20220511-224533
base:   https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-next
config: x86_64-randconfig-s021-20220509 (https://download.01.org/0day-ci/archive/20220512/202205120459.Wey9QKrW-lkp@intel.com/config)
compiler: gcc-11 (Debian 11.2.0-20) 11.2.0
reproduce:
        # apt-get install sparse
        # sparse version: v0.6.4-dirty
        # https://github.com/intel-lab-lkp/linux/commit/32af2a918274a92da86089672d5d7adba63dc0cf
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Maxime-Ripard/clk-More-clock-rate-fixes-and-tests/20220511-224533
        git checkout 32af2a918274a92da86089672d5d7adba63dc0cf
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        make W=1 C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' O=build_dir ARCH=x86_64 SHELL=/bin/bash drivers/clk/

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>


sparse warnings: (new ones prefixed by >>)
>> drivers/clk/clk.c:1502:45: sparse: sparse: incorrect type in argument 2 (different modifiers) @@     expected struct clk_rate_request *const old_req @@     got struct clk_rate_request const *old_req @@
   drivers/clk/clk.c:1502:45: sparse:     expected struct clk_rate_request *const old_req
   drivers/clk/clk.c:1502:45: sparse:     got struct clk_rate_request const *old_req

vim +1502 drivers/clk/clk.c

  1481	
  1482	/**
  1483	 * clk_hw_forward_rate_request - Forwards a clk_rate_request to a clock's parent
  1484	 * @hw: the original clock that got the rate request
  1485	 * @old_req: the original clk_rate_request structure we want to forward
  1486	 * @parent: the clk we want to forward @old_req to
  1487	 * @req: the clk_rate_request structure we want to initialise
  1488	 * @parent_rate: The rate which is to be requested to @parent
  1489	 *
  1490	 * Initializes a clk_rate_request structure to submit to a clock parent
  1491	 * in __clk_determine_rate() or similar functions.
  1492	 */
  1493	void clk_hw_forward_rate_request(const struct clk_hw *hw,
  1494					 const struct clk_rate_request *old_req,
  1495					 const struct clk_hw *parent,
  1496					 struct clk_rate_request *req,
  1497					 unsigned long parent_rate)
  1498	{
  1499		if (WARN_ON(!hw || !old_req || !parent || !req))
  1500			return;
  1501	
> 1502		clk_core_forward_rate_req(hw->core, old_req,
  1503					  parent->core, req,
  1504					  parent_rate);
  1505	}
  1506	

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp

Re: [PATCH v3 22/28] clk: Stop forwarding clk_rate_requests to the parent

[kernel test robot]

Hi Maxime,

I love your patch! Yet something to improve:

[auto build test ERROR on clk/clk-next]
[also build test ERROR on linus/master v5.18-rc6 next-20220511]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/intel-lab-lkp/linux/commits/Maxime-Ripard/clk-More-clock-rate-fixes-and-tests/20220511-224533
base:   https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git clk-next
config: i386-randconfig-r006-20220509 (https://download.01.org/0day-ci/archive/20220512/202205120547.M8CYJHbN-lkp@intel.com/config)
compiler: clang version 15.0.0 (https://github.com/llvm/llvm-project 18dd123c56754edf62c7042dcf23185c3727610f)
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/intel-lab-lkp/linux/commit/32af2a918274a92da86089672d5d7adba63dc0cf
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Maxime-Ripard/clk-More-clock-rate-fixes-and-tests/20220511-224533
        git checkout 32af2a918274a92da86089672d5d7adba63dc0cf
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=i386 SHELL=/bin/bash

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

>> drivers/clk/clk.c:1502:38: error: passing 'const struct clk_rate_request *' to parameter of type 'struct clk_rate_request *' discards qualifiers [-Werror,-Wincompatible-pointer-types-discards-qualifiers]
           clk_core_forward_rate_req(hw->core, old_req,
                                               ^~~~~~~
   drivers/clk/clk.c:568:38: note: passing argument to parameter 'old_req' here
                             struct clk_rate_request * const old_req,
                                                             ^
   1 error generated.


vim +1502 drivers/clk/clk.c

  1481	
  1482	/**
  1483	 * clk_hw_forward_rate_request - Forwards a clk_rate_request to a clock's parent
  1484	 * @hw: the original clock that got the rate request
  1485	 * @old_req: the original clk_rate_request structure we want to forward
  1486	 * @parent: the clk we want to forward @old_req to
  1487	 * @req: the clk_rate_request structure we want to initialise
  1488	 * @parent_rate: The rate which is to be requested to @parent
  1489	 *
  1490	 * Initializes a clk_rate_request structure to submit to a clock parent
  1491	 * in __clk_determine_rate() or similar functions.
  1492	 */
  1493	void clk_hw_forward_rate_request(const struct clk_hw *hw,
  1494					 const struct clk_rate_request *old_req,
  1495					 const struct clk_hw *parent,
  1496					 struct clk_rate_request *req,
  1497					 unsigned long parent_rate)
  1498	{
  1499		if (WARN_ON(!hw || !old_req || !parent || !req))
  1500			return;
  1501	
> 1502		clk_core_forward_rate_req(hw->core, old_req,
  1503					  parent->core, req,
  1504					  parent_rate);
  1505	}
  1506	

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp

Re: [PATCH v3 00/28] clk: More clock rate fixes and tests

[Maxime Ripard]

Hi Stephen, Mike,

On Wed, May 11, 2022 at 04:48:30PM +0200, Maxime Ripard wrote:
> On Wed, May 11, 2022 at 04:42:21PM +0200, Maxime Ripard wrote:
> > Thanks to the feedback I got on the previous series, I found and fixed a
> > number of bugs in the clock framework and how it deals with rates,
> > especially when it comes to orphan clocks.
> > 
> > In order to make sure this doesn't pop up again as a regression, I've
> > extended the number of tests.
> > 
> > The first patch reintroduces the clk_set_rate_range call on clk_put, but
> > this time will only do so if there was a range set on that clock to
> > begin with. It should be less intrusive, and reduce the number of
> > potential side effects considerably.
> > 
> > We then have a fix for the qcom rcg2 issue that has been reported
> > recently, and two patches to address a regression with the RaspberryPi4.
> 
> Those four patches are fixing regressions in 5.18. Even though the later
> patches are also fixing some issues, the first four should have your
> priority over the rest.

Could we please move forward on this?

Maxime