* [PATCH v5 0/4] add generic vDPA device support
@ 2022-05-12 6:20 Longpeng(Mike) via
2022-05-12 6:21 ` [PATCH v5 1/4] linux-headers: Update headers to Linux 5.18-rc6 Longpeng(Mike) via
` (3 more replies)
0 siblings, 4 replies; 11+ messages in thread
From: Longpeng(Mike) via @ 2022-05-12 6:20 UTC (permalink / raw)
To: stefanha, mst, jasowang, sgarzare
Cc: cohuck, pbonzini, arei.gonglei, yechuan, huangzhichao,
qemu-devel, longpeng2
From: Longpeng <longpeng2@huawei.com>
Hi guys,
With the generic vDPA device, QEMU won't need to touch the device
types any more, such like vfio.
We can use the generic vDPA device as follow:
-device vhost-vdpa-device-pci,vhostdev=/dev/vhost-vdpa-X
Or
-M microvm -m 512m -smp 2 -kernel ... -initrd ... -device \
vhost-vdpa-device,vhostdev=/dev/vhost-vdpa-x
I've done some simple tests on Huawei's offloading card (net, 0.95).
Changes v4 -> v5:
Patch 3:
- remove vhostfd [Jason]
- support virtio-mmio [Jason]
Changes v3 -> v4:
v3: https://www.mail-archive.com/qemu-devel@nongnu.org/msg877015.html
- reorganize the series [Stefano]
- fix some typos [Stefano]
- fix logical error in vhost_vdpa_device_realize [Stefano]
Changes v2 -> v3
Patch 4 & 5:
- only call vdpa ioctls in vdpa-dev.c [Stefano, Longpeng]
- s/VQS_NUM/VQS_COUNT [Stefano]
- check both vdpa_dev_fd and vdpa_dev [Stefano]
Patch 6:
- move all steps into vhost_vdpa_device_unrealize. [Stefano]
Changes RFC -> v2
Patch 1:
- rename 'pdev_id' to 'trans_devid' [Michael]
- only use transitional device id for the devices
listed in the spec [Michael]
- use macros to make the id_info table clearer [Longpeng]
- add some modern devices in the id_info table [Longpeng]
Patch 2:
- remove the GET_VECTORS_NUM command [Jason]
Patch 4:
- expose vdpa_dev_fd as a QOM preperty [Stefan]
- introduce vhost_vdpa_device_get_u32 as a common
function to make the code clearer [Stefan]
- fix the misleading description of 'dc->desc' [Stefano]
Patch 5:
- check returned number of virtqueues [Stefan]
Patch 6:
- init s->num_queues [Stefano]
- free s->dev.vqs [Stefano]
Longpeng (Mike) (4):
linux-headers: Update headers to Linux 5.18-rc6
virtio: get class_id and pci device id by the virtio id
vdpa: add vdpa-dev support
vdpa: add vdpa-dev-pci support
hw/virtio/Kconfig | 5 +
hw/virtio/meson.build | 2 +
hw/virtio/vdpa-dev-pci.c | 101 ++++++++++
hw/virtio/vdpa-dev.c | 377 +++++++++++++++++++++++++++++++++++
hw/virtio/virtio-pci.c | 77 +++++++
hw/virtio/virtio-pci.h | 5 +
include/hw/virtio/vdpa-dev.h | 43 ++++
linux-headers/linux/vhost.h | 7 +
8 files changed, 617 insertions(+)
create mode 100644 hw/virtio/vdpa-dev-pci.c
create mode 100644 hw/virtio/vdpa-dev.c
create mode 100644 include/hw/virtio/vdpa-dev.h
--
2.23.0
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v5 1/4] linux-headers: Update headers to Linux 5.18-rc6
2022-05-12 6:20 [PATCH v5 0/4] add generic vDPA device support Longpeng(Mike) via
@ 2022-05-12 6:21 ` Longpeng(Mike) via
2022-05-12 6:21 ` [PATCH v5 2/4] virtio: get class_id and pci device id by the virtio id Longpeng(Mike) via
` (2 subsequent siblings)
3 siblings, 0 replies; 11+ messages in thread
From: Longpeng(Mike) via @ 2022-05-12 6:21 UTC (permalink / raw)
To: stefanha, mst, jasowang, sgarzare
Cc: cohuck, pbonzini, arei.gonglei, yechuan, huangzhichao,
qemu-devel, longpeng2
From: Longpeng <longpeng2@huawei.com>
Update headers to 5.18-rc6. I need latest vhost changes.
Signed-off-by: Longpeng <longpeng2@huawei.com>
---
| 7 +++++++
1 file changed, 7 insertions(+)
--git a/linux-headers/linux/vhost.h b/linux-headers/linux/vhost.h
index c998860d7b..5d99e7c242 100644
--- a/linux-headers/linux/vhost.h
+++ b/linux-headers/linux/vhost.h
@@ -150,4 +150,11 @@
/* Get the valid iova range */
#define VHOST_VDPA_GET_IOVA_RANGE _IOR(VHOST_VIRTIO, 0x78, \
struct vhost_vdpa_iova_range)
+
+/* Get the config size */
+#define VHOST_VDPA_GET_CONFIG_SIZE _IOR(VHOST_VIRTIO, 0x79, __u32)
+
+/* Get the count of all virtqueues */
+#define VHOST_VDPA_GET_VQS_COUNT _IOR(VHOST_VIRTIO, 0x80, __u32)
+
#endif
--
2.23.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v5 2/4] virtio: get class_id and pci device id by the virtio id
2022-05-12 6:20 [PATCH v5 0/4] add generic vDPA device support Longpeng(Mike) via
2022-05-12 6:21 ` [PATCH v5 1/4] linux-headers: Update headers to Linux 5.18-rc6 Longpeng(Mike) via
@ 2022-05-12 6:21 ` Longpeng(Mike) via
2022-05-12 6:56 ` Michael S. Tsirkin
2022-05-12 6:21 ` [PATCH v5 3/4] vdpa: add vdpa-dev support Longpeng(Mike) via
2022-05-12 6:21 ` [PATCH v5 4/4] vdpa: add vdpa-dev-pci support Longpeng(Mike) via
3 siblings, 1 reply; 11+ messages in thread
From: Longpeng(Mike) via @ 2022-05-12 6:21 UTC (permalink / raw)
To: stefanha, mst, jasowang, sgarzare
Cc: cohuck, pbonzini, arei.gonglei, yechuan, huangzhichao,
qemu-devel, longpeng2
From: Longpeng <longpeng2@huawei.com>
Add helpers to get the "Transitional PCI Device ID" and "class_id"
of the device specified by the "Virtio Device ID".
These helpers will be used to build the generic vDPA device later.
Signed-off-by: Longpeng <longpeng2@huawei.com>
---
hw/virtio/virtio-pci.c | 77 ++++++++++++++++++++++++++++++++++++++++++
hw/virtio/virtio-pci.h | 5 +++
2 files changed, 82 insertions(+)
diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c
index 7cf1231c1c..fdfa205cee 100644
--- a/hw/virtio/virtio-pci.c
+++ b/hw/virtio/virtio-pci.c
@@ -19,6 +19,7 @@
#include "exec/memop.h"
#include "standard-headers/linux/virtio_pci.h"
+#include "standard-headers/linux/virtio_ids.h"
#include "hw/boards.h"
#include "hw/virtio/virtio.h"
#include "migration/qemu-file-types.h"
@@ -212,6 +213,79 @@ static int virtio_pci_load_queue(DeviceState *d, int n, QEMUFile *f)
return 0;
}
+typedef struct VirtIOPCIIDInfo {
+ /* virtio id */
+ uint16_t vdev_id;
+ /* pci device id for the transitional device */
+ uint16_t trans_devid;
+ uint16_t class_id;
+} VirtIOPCIIDInfo;
+
+#define VIRTIO_TRANS_DEV_ID_INFO(name, class) \
+ { \
+ .vdev_id = VIRTIO_ID_##name, \
+ .trans_devid = PCI_DEVICE_ID_VIRTIO_##name, \
+ .class_id = class, \
+ }
+
+#define VIRTIO_MODERN_DEV_ID_NFO(name, class) \
+ { \
+ .vdev_id = VIRTIO_ID_##name, \
+ .class_id = class, \
+ }
+
+static const VirtIOPCIIDInfo virtio_pci_id_info[] = {
+ /* Non-transitional devices */
+ VIRTIO_MODERN_DEV_ID_NFO(CRYPTO, PCI_CLASS_OTHERS),
+ VIRTIO_MODERN_DEV_ID_NFO(FS, PCI_CLASS_STORAGE_OTHER),
+ /* Transitional devices */
+ VIRTIO_TRANS_DEV_ID_INFO(NET, PCI_CLASS_NETWORK_ETHERNET),
+ VIRTIO_TRANS_DEV_ID_INFO(BLOCK, PCI_CLASS_STORAGE_SCSI),
+ VIRTIO_TRANS_DEV_ID_INFO(CONSOLE, PCI_CLASS_COMMUNICATION_OTHER),
+ VIRTIO_TRANS_DEV_ID_INFO(SCSI, PCI_CLASS_STORAGE_SCSI),
+ VIRTIO_TRANS_DEV_ID_INFO(9P, PCI_BASE_CLASS_NETWORK),
+ VIRTIO_TRANS_DEV_ID_INFO(BALLOON, PCI_CLASS_OTHERS),
+ VIRTIO_TRANS_DEV_ID_INFO(RNG, PCI_CLASS_OTHERS),
+};
+
+static const VirtIOPCIIDInfo *virtio_pci_get_id_info(uint16_t vdev_id)
+{
+ const VirtIOPCIIDInfo *info = NULL;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(virtio_pci_id_info); i++) {
+ if (virtio_pci_id_info[i].vdev_id == vdev_id) {
+ info = &virtio_pci_id_info[i];
+ break;
+ }
+ }
+
+ if (!info) {
+ /* The device id is invalid or not added to the id_info yet. */
+ error_report("Invalid virtio device(id %u)", vdev_id);
+ abort();
+ }
+
+ return info;
+}
+
+/*
+ * Get the Transitional Device ID for the specific device, return
+ * zero if the device is non-transitional.
+ */
+uint16_t virtio_pci_get_trans_devid(uint16_t device_id)
+{
+ return virtio_pci_get_id_info(device_id)->trans_devid;
+}
+
+/*
+ * Get the Class ID for the specific device.
+ */
+uint16_t virtio_pci_get_class_id(uint16_t device_id)
+{
+ return virtio_pci_get_id_info(device_id)->class_id;
+}
+
static bool virtio_pci_ioeventfd_enabled(DeviceState *d)
{
VirtIOPCIProxy *proxy = to_virtio_pci_proxy(d);
@@ -1675,6 +1749,9 @@ static void virtio_pci_device_plugged(DeviceState *d, Error **errp)
* is set to PCI_SUBVENDOR_ID_REDHAT_QUMRANET by default.
*/
pci_set_word(config + PCI_SUBSYSTEM_ID, virtio_bus_get_vdev_id(bus));
+ if (proxy->trans_devid) {
+ pci_config_set_device_id(config, proxy->trans_devid);
+ }
} else {
/* pure virtio-1.0 */
pci_set_word(config + PCI_VENDOR_ID,
diff --git a/hw/virtio/virtio-pci.h b/hw/virtio/virtio-pci.h
index 2446dcd9ae..f08665cd1b 100644
--- a/hw/virtio/virtio-pci.h
+++ b/hw/virtio/virtio-pci.h
@@ -146,6 +146,8 @@ struct VirtIOPCIProxy {
bool disable_modern;
bool ignore_backend_features;
OnOffAuto disable_legacy;
+ /* Transitional device id */
+ uint16_t trans_devid;
uint32_t class_code;
uint32_t nvectors;
uint32_t dfselect;
@@ -158,6 +160,9 @@ struct VirtIOPCIProxy {
VirtioBusState bus;
};
+uint16_t virtio_pci_get_trans_devid(uint16_t device_id);
+uint16_t virtio_pci_get_class_id(uint16_t device_id);
+
static inline bool virtio_pci_modern(VirtIOPCIProxy *proxy)
{
return !proxy->disable_modern;
--
2.23.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v5 3/4] vdpa: add vdpa-dev support
2022-05-12 6:20 [PATCH v5 0/4] add generic vDPA device support Longpeng(Mike) via
2022-05-12 6:21 ` [PATCH v5 1/4] linux-headers: Update headers to Linux 5.18-rc6 Longpeng(Mike) via
2022-05-12 6:21 ` [PATCH v5 2/4] virtio: get class_id and pci device id by the virtio id Longpeng(Mike) via
@ 2022-05-12 6:21 ` Longpeng(Mike) via
2022-05-12 14:36 ` Stefano Garzarella
2022-05-12 6:21 ` [PATCH v5 4/4] vdpa: add vdpa-dev-pci support Longpeng(Mike) via
3 siblings, 1 reply; 11+ messages in thread
From: Longpeng(Mike) via @ 2022-05-12 6:21 UTC (permalink / raw)
To: stefanha, mst, jasowang, sgarzare
Cc: cohuck, pbonzini, arei.gonglei, yechuan, huangzhichao,
qemu-devel, longpeng2
From: Longpeng <longpeng2@huawei.com>
Supports vdpa-dev, we can use the deivce directly:
-M microvm -m 512m -smp 2 -kernel ... -initrd ... -device \
vhost-vdpa-device,vhostdev=/dev/vhost-vdpa-x
Signed-off-by: Longpeng <longpeng2@huawei.com>
---
hw/virtio/Kconfig | 5 +
hw/virtio/meson.build | 1 +
hw/virtio/vdpa-dev.c | 377 +++++++++++++++++++++++++++++++++++
include/hw/virtio/vdpa-dev.h | 43 ++++
4 files changed, 426 insertions(+)
create mode 100644 hw/virtio/vdpa-dev.c
create mode 100644 include/hw/virtio/vdpa-dev.h
diff --git a/hw/virtio/Kconfig b/hw/virtio/Kconfig
index c144d42f9b..724eb58a32 100644
--- a/hw/virtio/Kconfig
+++ b/hw/virtio/Kconfig
@@ -68,3 +68,8 @@ config VHOST_USER_RNG
bool
default y
depends on VIRTIO && VHOST_USER
+
+config VHOST_VDPA_DEV
+ bool
+ default y
+ depends on VIRTIO && VHOST_VDPA && LINUX
diff --git a/hw/virtio/meson.build b/hw/virtio/meson.build
index 67dc77e00f..8f6f86db71 100644
--- a/hw/virtio/meson.build
+++ b/hw/virtio/meson.build
@@ -29,6 +29,7 @@ virtio_ss.add(when: 'CONFIG_VHOST_USER_I2C', if_true: files('vhost-user-i2c.c'))
virtio_ss.add(when: ['CONFIG_VIRTIO_PCI', 'CONFIG_VHOST_USER_I2C'], if_true: files('vhost-user-i2c-pci.c'))
virtio_ss.add(when: 'CONFIG_VHOST_USER_RNG', if_true: files('vhost-user-rng.c'))
virtio_ss.add(when: ['CONFIG_VHOST_USER_RNG', 'CONFIG_VIRTIO_PCI'], if_true: files('vhost-user-rng-pci.c'))
+virtio_ss.add(when: 'CONFIG_VHOST_VDPA_DEV', if_true: files('vdpa-dev.c'))
virtio_pci_ss = ss.source_set()
virtio_pci_ss.add(when: 'CONFIG_VHOST_VSOCK', if_true: files('vhost-vsock-pci.c'))
diff --git a/hw/virtio/vdpa-dev.c b/hw/virtio/vdpa-dev.c
new file mode 100644
index 0000000000..56597c881a
--- /dev/null
+++ b/hw/virtio/vdpa-dev.c
@@ -0,0 +1,377 @@
+/*
+ * Vhost Vdpa Device
+ *
+ * Copyright (c) Huawei Technologies Co., Ltd. 2022. All Rights Reserved.
+ *
+ * Authors:
+ * Longpeng <longpeng2@huawei.com>
+ *
+ * Largely based on the "vhost-user-blk-pci.c" and "vhost-user-blk.c" implemented by:
+ * Changpeng Liu <changpeng.liu@intel.com>
+ *
+ * This work is licensed under the terms of the GNU LGPL, version 2 or later.
+ * See the COPYING.LIB file in the top-level directory.
+ */
+#include "qemu/osdep.h"
+#include <sys/ioctl.h>
+#include <linux/vhost.h>
+#include "qapi/error.h"
+#include "qemu/error-report.h"
+#include "qemu/cutils.h"
+#include "hw/qdev-core.h"
+#include "hw/qdev-properties.h"
+#include "hw/qdev-properties-system.h"
+#include "hw/virtio/vhost.h"
+#include "hw/virtio/virtio.h"
+#include "hw/virtio/virtio-bus.h"
+#include "hw/virtio/virtio-access.h"
+#include "hw/virtio/vdpa-dev.h"
+#include "sysemu/sysemu.h"
+#include "sysemu/runstate.h"
+
+static void
+vhost_vdpa_device_dummy_handle_output(VirtIODevice *vdev, VirtQueue *vq)
+{
+ /* Nothing to do */
+}
+
+static uint32_t
+vhost_vdpa_device_get_u32(int fd, unsigned long int cmd, Error **errp)
+{
+ uint32_t val = (uint32_t)-1;
+
+ if (ioctl(fd, cmd, &val) < 0) {
+ error_setg(errp, "vhost-vdpa-device: cmd 0x%lx failed: %s",
+ cmd, strerror(errno));
+ }
+
+ return val;
+}
+
+static void vhost_vdpa_device_realize(DeviceState *dev, Error **errp)
+{
+ VirtIODevice *vdev = VIRTIO_DEVICE(dev);
+ VhostVdpaDevice *v = VHOST_VDPA_DEVICE(vdev);
+ uint16_t max_queue_size;
+ struct vhost_virtqueue *vqs;
+ int i, ret;
+
+ if (!v->vhostdev) {
+ error_setg(errp, "vhost-vdpa-device: vhostdev are missing");
+ return;
+ }
+
+ v->vhostfd = qemu_open(v->vhostdev, O_RDWR, errp);
+ if (*errp) {
+ return;
+ }
+ v->vdpa.device_fd = v->vhostfd;
+
+ v->vdev_id = vhost_vdpa_device_get_u32(v->vhostfd,
+ VHOST_VDPA_GET_DEVICE_ID, errp);
+ if (*errp) {
+ goto out;
+ }
+
+ max_queue_size = vhost_vdpa_device_get_u32(v->vhostfd,
+ VHOST_VDPA_GET_VRING_NUM, errp);
+ if (*errp) {
+ goto out;
+ }
+
+ if (v->queue_size > max_queue_size) {
+ error_setg(errp, "vhost-vdpa-device: invalid queue_size: %u (max:%u)",
+ v->queue_size, max_queue_size);
+ goto out;
+ } else if (!v->queue_size) {
+ v->queue_size = max_queue_size;
+ }
+
+ v->num_queues = vhost_vdpa_device_get_u32(v->vhostfd,
+ VHOST_VDPA_GET_VQS_COUNT, errp);
+ if (*errp) {
+ goto out;
+ }
+
+ if (!v->num_queues || v->num_queues > VIRTIO_QUEUE_MAX) {
+ error_setg(errp, "invalid number of virtqueues: %u (max:%u)",
+ v->num_queues, VIRTIO_QUEUE_MAX);
+ goto out;
+ }
+
+ v->dev.nvqs = v->num_queues;
+ vqs = g_new0(struct vhost_virtqueue, v->dev.nvqs);
+ v->dev.vqs = vqs;
+ v->dev.vq_index = 0;
+ v->dev.vq_index_end = v->dev.nvqs;
+ v->dev.backend_features = 0;
+ v->started = false;
+
+ ret = vhost_dev_init(&v->dev, &v->vdpa, VHOST_BACKEND_TYPE_VDPA, 0, NULL);
+ if (ret < 0) {
+ error_setg(errp, "vhost-vdpa-device: vhost initialization failed: %s",
+ strerror(-ret));
+ goto free_vqs;
+ }
+
+ v->config_size = vhost_vdpa_device_get_u32(v->vhostfd,
+ VHOST_VDPA_GET_CONFIG_SIZE, errp);
+ if (*errp) {
+ goto vhost_cleanup;
+ }
+
+ if (v->post_init && v->post_init(v, errp) < 0) {
+ goto free_virtio;
+ }
+
+ v->config = g_malloc0(v->config_size);
+
+ ret = vhost_dev_get_config(&v->dev, v->config, v->config_size, NULL);
+ if (ret < 0) {
+ error_setg(errp, "vhost-vdpa-device: get config failed");
+ goto free_config;
+ }
+
+ virtio_init(vdev, "vhost-vdpa", v->vdev_id, v->config_size);
+
+ v->virtqs = g_new0(VirtQueue *, v->dev.nvqs);
+ for (i = 0; i < v->dev.nvqs; i++) {
+ v->virtqs[i] = virtio_add_queue(vdev, v->queue_size,
+ vhost_vdpa_device_dummy_handle_output);
+ }
+
+ return;
+
+free_virtio:
+ for (i = 0; i < v->num_queues; i++) {
+ virtio_delete_queue(v->virtqs[i]);
+ }
+ g_free(v->virtqs);
+ virtio_cleanup(vdev);
+free_config:
+ g_free(v->config);
+vhost_cleanup:
+ vhost_dev_cleanup(&v->dev);
+free_vqs:
+ g_free(vqs);
+out:
+ qemu_close(v->vhostfd);
+ v->vhostfd = -1;
+}
+
+static void vhost_vdpa_device_unrealize(DeviceState *dev)
+{
+ VirtIODevice *vdev = VIRTIO_DEVICE(dev);
+ VhostVdpaDevice *s = VHOST_VDPA_DEVICE(vdev);
+ int i;
+
+ virtio_set_status(vdev, 0);
+
+ for (i = 0; i < s->num_queues; i++) {
+ virtio_delete_queue(s->virtqs[i]);
+ }
+ g_free(s->virtqs);
+ virtio_cleanup(vdev);
+
+ g_free(s->config);
+ g_free(s->dev.vqs);
+ vhost_dev_cleanup(&s->dev);
+ qemu_close(s->vhostfd);
+ s->vhostfd = -1;
+}
+
+static void
+vhost_vdpa_device_get_config(VirtIODevice *vdev, uint8_t *config)
+{
+ VhostVdpaDevice *s = VHOST_VDPA_DEVICE(vdev);
+
+ memcpy(config, s->config, s->config_size);
+}
+
+static void
+vhost_vdpa_device_set_config(VirtIODevice *vdev, const uint8_t *config)
+{
+ VhostVdpaDevice *s = VHOST_VDPA_DEVICE(vdev);
+ int ret;
+
+ ret = vhost_dev_set_config(&s->dev, s->config, 0, s->config_size,
+ VHOST_SET_CONFIG_TYPE_MASTER);
+ if (ret) {
+ error_report("set device config space failed");
+ return;
+ }
+}
+
+static uint64_t vhost_vdpa_device_get_features(VirtIODevice *vdev,
+ uint64_t features,
+ Error **errp)
+{
+ VhostVdpaDevice *s = VHOST_VDPA_DEVICE(vdev);
+ uint64_t backend_features = s->dev.features;
+
+ if (!virtio_has_feature(features, VIRTIO_F_IOMMU_PLATFORM)) {
+ virtio_clear_feature(&backend_features, VIRTIO_F_IOMMU_PLATFORM);
+ }
+
+ return backend_features;
+}
+
+static int vhost_vdpa_device_start(VirtIODevice *vdev, Error **errp)
+{
+ VhostVdpaDevice *s = VHOST_VDPA_DEVICE(vdev);
+ BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev)));
+ VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
+ int i, ret;
+
+ if (!k->set_guest_notifiers) {
+ error_setg(errp, "binding does not support guest notifiers");
+ return -ENOSYS;
+ }
+
+ ret = vhost_dev_enable_notifiers(&s->dev, vdev);
+ if (ret < 0) {
+ error_setg_errno(errp, -ret, "Error enabling host notifiers");
+ return ret;
+ }
+
+ ret = k->set_guest_notifiers(qbus->parent, s->dev.nvqs, true);
+ if (ret < 0) {
+ error_setg_errno(errp, -ret, "Error binding guest notifier");
+ goto err_host_notifiers;
+ }
+
+ s->dev.acked_features = vdev->guest_features;
+
+ ret = vhost_dev_start(&s->dev, vdev);
+ if (ret < 0) {
+ error_setg_errno(errp, -ret, "Error starting vhost");
+ goto err_guest_notifiers;
+ }
+ s->started = true;
+
+ /*
+ * guest_notifier_mask/pending not used yet, so just unmask
+ * everything here. virtio-pci will do the right thing by
+ * enabling/disabling irqfd.
+ */
+ for (i = 0; i < s->dev.nvqs; i++) {
+ vhost_virtqueue_mask(&s->dev, vdev, i, false);
+ }
+
+ return ret;
+
+err_guest_notifiers:
+ k->set_guest_notifiers(qbus->parent, s->dev.nvqs, false);
+err_host_notifiers:
+ vhost_dev_disable_notifiers(&s->dev, vdev);
+ return ret;
+}
+
+static void vhost_vdpa_device_stop(VirtIODevice *vdev)
+{
+ VhostVdpaDevice *s = VHOST_VDPA_DEVICE(vdev);
+ BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev)));
+ VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
+ int ret;
+
+ if (!s->started) {
+ return;
+ }
+ s->started = false;
+
+ if (!k->set_guest_notifiers) {
+ return;
+ }
+
+ vhost_dev_stop(&s->dev, vdev);
+
+ ret = k->set_guest_notifiers(qbus->parent, s->dev.nvqs, false);
+ if (ret < 0) {
+ error_report("vhost guest notifier cleanup failed: %d", ret);
+ return;
+ }
+
+ vhost_dev_disable_notifiers(&s->dev, vdev);
+}
+
+static void vhost_vdpa_device_set_status(VirtIODevice *vdev, uint8_t status)
+{
+ VhostVdpaDevice *s = VHOST_VDPA_DEVICE(vdev);
+ bool should_start = virtio_device_started(vdev, status);
+ Error *local_err = NULL;
+ int ret;
+
+ if (!vdev->vm_running) {
+ should_start = false;
+ }
+
+ if (s->started == should_start) {
+ return;
+ }
+
+ if (should_start) {
+ ret = vhost_vdpa_device_start(vdev, &local_err);
+ if (ret < 0) {
+ error_reportf_err(local_err, "vhost-vdpa-device: start failed: ");
+ }
+ } else {
+ vhost_vdpa_device_stop(vdev);
+ }
+}
+
+static Property vhost_vdpa_device_properties[] = {
+ DEFINE_PROP_STRING("vhostdev", VhostVdpaDevice, vhostdev),
+ DEFINE_PROP_UINT16("queue-size", VhostVdpaDevice, queue_size, 0),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static const VMStateDescription vmstate_vhost_vdpa_device = {
+ .name = "vhost-vdpa-device",
+ .unmigratable = 1,
+ .minimum_version_id = 1,
+ .version_id = 1,
+ .fields = (VMStateField[]) {
+ VMSTATE_VIRTIO_DEVICE,
+ VMSTATE_END_OF_LIST()
+ },
+};
+
+static void vhost_vdpa_device_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ VirtioDeviceClass *vdc = VIRTIO_DEVICE_CLASS(klass);
+
+ device_class_set_props(dc, vhost_vdpa_device_properties);
+ dc->desc = "VDPA-based generic device assignment";
+ dc->vmsd = &vmstate_vhost_vdpa_device;
+ set_bit(DEVICE_CATEGORY_MISC, dc->categories);
+ vdc->realize = vhost_vdpa_device_realize;
+ vdc->unrealize = vhost_vdpa_device_unrealize;
+ vdc->get_config = vhost_vdpa_device_get_config;
+ vdc->set_config = vhost_vdpa_device_set_config;
+ vdc->get_features = vhost_vdpa_device_get_features;
+ vdc->set_status = vhost_vdpa_device_set_status;
+}
+
+static void vhost_vdpa_device_instance_init(Object *obj)
+{
+ VhostVdpaDevice *s = VHOST_VDPA_DEVICE(obj);
+
+ device_add_bootindex_property(obj, &s->bootindex, "bootindex",
+ NULL, DEVICE(obj));
+}
+
+static const TypeInfo vhost_vdpa_device_info = {
+ .name = TYPE_VHOST_VDPA_DEVICE,
+ .parent = TYPE_VIRTIO_DEVICE,
+ .instance_size = sizeof(VhostVdpaDevice),
+ .class_init = vhost_vdpa_device_class_init,
+ .instance_init = vhost_vdpa_device_instance_init,
+};
+
+static void register_vhost_vdpa_device_type(void)
+{
+ type_register_static(&vhost_vdpa_device_info);
+}
+
+type_init(register_vhost_vdpa_device_type);
diff --git a/include/hw/virtio/vdpa-dev.h b/include/hw/virtio/vdpa-dev.h
new file mode 100644
index 0000000000..4dbf98195c
--- /dev/null
+++ b/include/hw/virtio/vdpa-dev.h
@@ -0,0 +1,43 @@
+/*
+ * Vhost Vdpa Device
+ *
+ * Copyright (c) Huawei Technologies Co., Ltd. 2022. All Rights Reserved.
+ *
+ * Authors:
+ * Longpeng <longpeng2@huawei.com>
+ *
+ * Largely based on the "vhost-user-blk.h" implemented by:
+ * Changpeng Liu <changpeng.liu@intel.com>
+ *
+ * This work is licensed under the terms of the GNU LGPL, version 2 or later.
+ * See the COPYING.LIB file in the top-level directory.
+ */
+#ifndef _VHOST_VDPA_DEVICE_H
+#define _VHOST_VDPA_DEVICE_H
+
+#include "hw/virtio/vhost.h"
+#include "hw/virtio/vhost-vdpa.h"
+#include "qom/object.h"
+
+
+#define TYPE_VHOST_VDPA_DEVICE "vhost-vdpa-device"
+OBJECT_DECLARE_SIMPLE_TYPE(VhostVdpaDevice, VHOST_VDPA_DEVICE)
+
+struct VhostVdpaDevice {
+ VirtIODevice parent_obj;
+ char *vhostdev;
+ int vhostfd;
+ int32_t bootindex;
+ uint32_t vdev_id;
+ uint32_t num_queues;
+ struct vhost_dev dev;
+ struct vhost_vdpa vdpa;
+ VirtQueue **virtqs;
+ uint8_t *config;
+ int config_size;
+ uint16_t queue_size;
+ bool started;
+ int (*post_init)(VhostVdpaDevice *v, Error **errp);
+};
+
+#endif
--
2.23.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v5 4/4] vdpa: add vdpa-dev-pci support
2022-05-12 6:20 [PATCH v5 0/4] add generic vDPA device support Longpeng(Mike) via
` (2 preceding siblings ...)
2022-05-12 6:21 ` [PATCH v5 3/4] vdpa: add vdpa-dev support Longpeng(Mike) via
@ 2022-05-12 6:21 ` Longpeng(Mike) via
2022-05-12 14:49 ` Stefano Garzarella
3 siblings, 1 reply; 11+ messages in thread
From: Longpeng(Mike) via @ 2022-05-12 6:21 UTC (permalink / raw)
To: stefanha, mst, jasowang, sgarzare
Cc: cohuck, pbonzini, arei.gonglei, yechuan, huangzhichao,
qemu-devel, longpeng2
From: Longpeng <longpeng2@huawei.com>
Supports vdpa-dev-pci, we can use the device as follow:
-device vhost-vdpa-device-pci,vhostdev=/dev/vhost-vdpa-X
Signed-off-by: Longpeng <longpeng2@huawei.com>
---
hw/virtio/meson.build | 1 +
hw/virtio/vdpa-dev-pci.c | 101 +++++++++++++++++++++++++++++++++++++++
2 files changed, 102 insertions(+)
create mode 100644 hw/virtio/vdpa-dev-pci.c
diff --git a/hw/virtio/meson.build b/hw/virtio/meson.build
index 8f6f86db71..c2da69616f 100644
--- a/hw/virtio/meson.build
+++ b/hw/virtio/meson.build
@@ -50,6 +50,7 @@ virtio_pci_ss.add(when: 'CONFIG_VIRTIO_SERIAL', if_true: files('virtio-serial-pc
virtio_pci_ss.add(when: 'CONFIG_VIRTIO_PMEM', if_true: files('virtio-pmem-pci.c'))
virtio_pci_ss.add(when: 'CONFIG_VIRTIO_IOMMU', if_true: files('virtio-iommu-pci.c'))
virtio_pci_ss.add(when: 'CONFIG_VIRTIO_MEM', if_true: files('virtio-mem-pci.c'))
+virtio_pci_ss.add(when: 'CONFIG_VHOST_VDPA_DEV', if_true: files('vdpa-dev-pci.c'))
virtio_ss.add_all(when: 'CONFIG_VIRTIO_PCI', if_true: virtio_pci_ss)
diff --git a/hw/virtio/vdpa-dev-pci.c b/hw/virtio/vdpa-dev-pci.c
new file mode 100644
index 0000000000..31bd17353a
--- /dev/null
+++ b/hw/virtio/vdpa-dev-pci.c
@@ -0,0 +1,101 @@
+/*
+ * Vhost Vdpa Device PCI Bindings
+ *
+ * Copyright (c) Huawei Technologies Co., Ltd. 2022. All Rights Reserved.
+ *
+ * Authors:
+ * Longpeng <longpeng2@huawei.com>
+ *
+ * Largely based on the "vhost-user-blk-pci.c" and "vhost-user-blk.c" implemented by:
+ * Changpeng Liu <changpeng.liu@intel.com>
+ *
+ * This work is licensed under the terms of the GNU LGPL, version 2 or later.
+ * See the COPYING.LIB file in the top-level directory.
+ */
+#include "qemu/osdep.h"
+#include <sys/ioctl.h>
+#include <linux/vhost.h>
+#include "hw/virtio/virtio.h"
+#include "hw/virtio/vdpa-dev.h"
+#include "hw/pci/pci.h"
+#include "hw/qdev-properties.h"
+#include "qapi/error.h"
+#include "qemu/error-report.h"
+#include "qemu/module.h"
+#include "virtio-pci.h"
+#include "qom/object.h"
+
+
+typedef struct VhostVdpaDevicePCI VhostVdpaDevicePCI;
+
+#define TYPE_VHOST_VDPA_DEVICE_PCI "vhost-vdpa-device-pci-base"
+DECLARE_INSTANCE_CHECKER(VhostVdpaDevicePCI, VHOST_VDPA_DEVICE_PCI,
+ TYPE_VHOST_VDPA_DEVICE_PCI)
+
+struct VhostVdpaDevicePCI {
+ VirtIOPCIProxy parent_obj;
+ VhostVdpaDevice vdev;
+};
+
+static void vhost_vdpa_device_pci_instance_init(Object *obj)
+{
+ VhostVdpaDevicePCI *dev = VHOST_VDPA_DEVICE_PCI(obj);
+
+ virtio_instance_init_common(obj, &dev->vdev, sizeof(dev->vdev),
+ TYPE_VHOST_VDPA_DEVICE);
+ object_property_add_alias(obj, "bootindex", OBJECT(&dev->vdev),
+ "bootindex");
+}
+
+static Property vhost_vdpa_device_pci_properties[] = {
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static int vhost_vdpa_device_pci_post_init(VhostVdpaDevice *v, Error **errp)
+{
+ VhostVdpaDevicePCI *dev = container_of(v, VhostVdpaDevicePCI, vdev);
+ VirtIOPCIProxy *vpci_dev = &dev->parent_obj;
+
+ vpci_dev->class_code = virtio_pci_get_class_id(v->vdev_id);
+ vpci_dev->trans_devid = virtio_pci_get_trans_devid(v->vdev_id);
+ /* one for config vector */
+ vpci_dev->nvectors = v->num_queues + 1;
+
+ return 0;
+}
+
+static void
+vhost_vdpa_device_pci_realize(VirtIOPCIProxy *vpci_dev, Error **errp)
+{
+ VhostVdpaDevicePCI *dev = VHOST_VDPA_DEVICE_PCI(vpci_dev);
+
+ dev->vdev.post_init = vhost_vdpa_device_pci_post_init;
+ qdev_realize(DEVICE(&dev->vdev), BUS(&vpci_dev->bus), errp);
+}
+
+static void vhost_vdpa_device_pci_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ VirtioPCIClass *k = VIRTIO_PCI_CLASS(klass);
+
+ set_bit(DEVICE_CATEGORY_MISC, dc->categories);
+ device_class_set_props(dc, vhost_vdpa_device_pci_properties);
+ k->realize = vhost_vdpa_device_pci_realize;
+}
+
+static const VirtioPCIDeviceTypeInfo vhost_vdpa_device_pci_info = {
+ .base_name = TYPE_VHOST_VDPA_DEVICE_PCI,
+ .generic_name = "vhost-vdpa-device-pci",
+ .transitional_name = "vhost-vdpa-device-pci-transitional",
+ .non_transitional_name = "vhost-vdpa-device-pci-non-transitional",
+ .instance_size = sizeof(VhostVdpaDevicePCI),
+ .instance_init = vhost_vdpa_device_pci_instance_init,
+ .class_init = vhost_vdpa_device_pci_class_init,
+};
+
+static void vhost_vdpa_device_pci_register(void)
+{
+ virtio_pci_types_register(&vhost_vdpa_device_pci_info);
+}
+
+type_init(vhost_vdpa_device_pci_register);
--
2.23.0
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH v5 2/4] virtio: get class_id and pci device id by the virtio id
2022-05-12 6:21 ` [PATCH v5 2/4] virtio: get class_id and pci device id by the virtio id Longpeng(Mike) via
@ 2022-05-12 6:56 ` Michael S. Tsirkin
2022-05-13 3:17 ` longpeng2--- via
0 siblings, 1 reply; 11+ messages in thread
From: Michael S. Tsirkin @ 2022-05-12 6:56 UTC (permalink / raw)
To: Longpeng(Mike)
Cc: stefanha, jasowang, sgarzare, cohuck, pbonzini, arei.gonglei,
yechuan, huangzhichao, qemu-devel
On Thu, May 12, 2022 at 02:21:01PM +0800, Longpeng(Mike) wrote:
> From: Longpeng <longpeng2@huawei.com>
>
> Add helpers to get the "Transitional PCI Device ID" and "class_id"
> of the device specified by the "Virtio Device ID".
>
> These helpers will be used to build the generic vDPA device later.
>
> Signed-off-by: Longpeng <longpeng2@huawei.com>
Except, the IDs in the current header a broken. I just fixed them
and they will be hopefully OK in the next version.
> ---
> hw/virtio/virtio-pci.c | 77 ++++++++++++++++++++++++++++++++++++++++++
> hw/virtio/virtio-pci.h | 5 +++
> 2 files changed, 82 insertions(+)
>
> diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c
> index 7cf1231c1c..fdfa205cee 100644
> --- a/hw/virtio/virtio-pci.c
> +++ b/hw/virtio/virtio-pci.c
> @@ -19,6 +19,7 @@
>
> #include "exec/memop.h"
> #include "standard-headers/linux/virtio_pci.h"
> +#include "standard-headers/linux/virtio_ids.h"
> #include "hw/boards.h"
> #include "hw/virtio/virtio.h"
> #include "migration/qemu-file-types.h"
> @@ -212,6 +213,79 @@ static int virtio_pci_load_queue(DeviceState *d, int n, QEMUFile *f)
> return 0;
> }
>
> +typedef struct VirtIOPCIIDInfo {
> + /* virtio id */
> + uint16_t vdev_id;
> + /* pci device id for the transitional device */
> + uint16_t trans_devid;
> + uint16_t class_id;
> +} VirtIOPCIIDInfo;
> +
> +#define VIRTIO_TRANS_DEV_ID_INFO(name, class) \
> + { \
> + .vdev_id = VIRTIO_ID_##name, \
> + .trans_devid = PCI_DEVICE_ID_VIRTIO_##name, \
> + .class_id = class, \
> + }
> +
> +#define VIRTIO_MODERN_DEV_ID_NFO(name, class) \
> + { \
> + .vdev_id = VIRTIO_ID_##name, \
> + .class_id = class, \
> + }
> +
No, I think I liked the original approach in the RFC better, even though
it duplicates a tiny bit of code.
This trick does not save a lot of typing and obscures the ID
use in case it's wrong (as was the case just recently).
> +static const VirtIOPCIIDInfo virtio_pci_id_info[] = {
> + /* Non-transitional devices */
> + VIRTIO_MODERN_DEV_ID_NFO(CRYPTO, PCI_CLASS_OTHERS),
> + VIRTIO_MODERN_DEV_ID_NFO(FS, PCI_CLASS_STORAGE_OTHER),
> + /* Transitional devices */
> + VIRTIO_TRANS_DEV_ID_INFO(NET, PCI_CLASS_NETWORK_ETHERNET),
> + VIRTIO_TRANS_DEV_ID_INFO(BLOCK, PCI_CLASS_STORAGE_SCSI),
> + VIRTIO_TRANS_DEV_ID_INFO(CONSOLE, PCI_CLASS_COMMUNICATION_OTHER),
> + VIRTIO_TRANS_DEV_ID_INFO(SCSI, PCI_CLASS_STORAGE_SCSI),
> + VIRTIO_TRANS_DEV_ID_INFO(9P, PCI_BASE_CLASS_NETWORK),
> + VIRTIO_TRANS_DEV_ID_INFO(BALLOON, PCI_CLASS_OTHERS),
> + VIRTIO_TRANS_DEV_ID_INFO(RNG, PCI_CLASS_OTHERS),
> +};
> +
> +static const VirtIOPCIIDInfo *virtio_pci_get_id_info(uint16_t vdev_id)
> +{
> + const VirtIOPCIIDInfo *info = NULL;
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(virtio_pci_id_info); i++) {
> + if (virtio_pci_id_info[i].vdev_id == vdev_id) {
> + info = &virtio_pci_id_info[i];
> + break;
> + }
> + }
> +
> + if (!info) {
> + /* The device id is invalid or not added to the id_info yet. */
> + error_report("Invalid virtio device(id %u)", vdev_id);
> + abort();
> + }
> +
> + return info;
> +}
> +
> +/*
> + * Get the Transitional Device ID for the specific device, return
> + * zero if the device is non-transitional.
> + */
> +uint16_t virtio_pci_get_trans_devid(uint16_t device_id)
> +{
> + return virtio_pci_get_id_info(device_id)->trans_devid;
> +}
> +
> +/*
> + * Get the Class ID for the specific device.
> + */
> +uint16_t virtio_pci_get_class_id(uint16_t device_id)
> +{
> + return virtio_pci_get_id_info(device_id)->class_id;
> +}
> +
> static bool virtio_pci_ioeventfd_enabled(DeviceState *d)
> {
> VirtIOPCIProxy *proxy = to_virtio_pci_proxy(d);
> @@ -1675,6 +1749,9 @@ static void virtio_pci_device_plugged(DeviceState *d, Error **errp)
> * is set to PCI_SUBVENDOR_ID_REDHAT_QUMRANET by default.
> */
> pci_set_word(config + PCI_SUBSYSTEM_ID, virtio_bus_get_vdev_id(bus));
> + if (proxy->trans_devid) {
> + pci_config_set_device_id(config, proxy->trans_devid);
> + }
> } else {
> /* pure virtio-1.0 */
> pci_set_word(config + PCI_VENDOR_ID,
> diff --git a/hw/virtio/virtio-pci.h b/hw/virtio/virtio-pci.h
> index 2446dcd9ae..f08665cd1b 100644
> --- a/hw/virtio/virtio-pci.h
> +++ b/hw/virtio/virtio-pci.h
> @@ -146,6 +146,8 @@ struct VirtIOPCIProxy {
> bool disable_modern;
> bool ignore_backend_features;
> OnOffAuto disable_legacy;
> + /* Transitional device id */
> + uint16_t trans_devid;
> uint32_t class_code;
> uint32_t nvectors;
> uint32_t dfselect;
> @@ -158,6 +160,9 @@ struct VirtIOPCIProxy {
> VirtioBusState bus;
> };
>
> +uint16_t virtio_pci_get_trans_devid(uint16_t device_id);
> +uint16_t virtio_pci_get_class_id(uint16_t device_id);
> +
> static inline bool virtio_pci_modern(VirtIOPCIProxy *proxy)
> {
> return !proxy->disable_modern;
> --
> 2.23.0
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v5 3/4] vdpa: add vdpa-dev support
2022-05-12 6:21 ` [PATCH v5 3/4] vdpa: add vdpa-dev support Longpeng(Mike) via
@ 2022-05-12 14:36 ` Stefano Garzarella
2022-05-13 2:17 ` longpeng2--- via
0 siblings, 1 reply; 11+ messages in thread
From: Stefano Garzarella @ 2022-05-12 14:36 UTC (permalink / raw)
To: Longpeng(Mike)
Cc: stefanha, mst, jasowang, cohuck, pbonzini, arei.gonglei, yechuan,
huangzhichao, qemu-devel
On Thu, May 12, 2022 at 02:21:02PM +0800, Longpeng(Mike) wrote:
>From: Longpeng <longpeng2@huawei.com>
>
>Supports vdpa-dev, we can use the deivce directly:
>
>-M microvm -m 512m -smp 2 -kernel ... -initrd ... -device \
>vhost-vdpa-device,vhostdev=/dev/vhost-vdpa-x
>
>Signed-off-by: Longpeng <longpeng2@huawei.com>
>---
> hw/virtio/Kconfig | 5 +
> hw/virtio/meson.build | 1 +
> hw/virtio/vdpa-dev.c | 377 +++++++++++++++++++++++++++++++++++
> include/hw/virtio/vdpa-dev.h | 43 ++++
> 4 files changed, 426 insertions(+)
> create mode 100644 hw/virtio/vdpa-dev.c
> create mode 100644 include/hw/virtio/vdpa-dev.h
>
>diff --git a/hw/virtio/Kconfig b/hw/virtio/Kconfig
>index c144d42f9b..724eb58a32 100644
>--- a/hw/virtio/Kconfig
>+++ b/hw/virtio/Kconfig
>@@ -68,3 +68,8 @@ config VHOST_USER_RNG
> bool
> default y
> depends on VIRTIO && VHOST_USER
>+
>+config VHOST_VDPA_DEV
>+ bool
>+ default y
>+ depends on VIRTIO && VHOST_VDPA && LINUX
>diff --git a/hw/virtio/meson.build b/hw/virtio/meson.build
>index 67dc77e00f..8f6f86db71 100644
>--- a/hw/virtio/meson.build
>+++ b/hw/virtio/meson.build
>@@ -29,6 +29,7 @@ virtio_ss.add(when: 'CONFIG_VHOST_USER_I2C', if_true: files('vhost-user-i2c.c'))
> virtio_ss.add(when: ['CONFIG_VIRTIO_PCI', 'CONFIG_VHOST_USER_I2C'], if_true: files('vhost-user-i2c-pci.c'))
> virtio_ss.add(when: 'CONFIG_VHOST_USER_RNG', if_true: files('vhost-user-rng.c'))
> virtio_ss.add(when: ['CONFIG_VHOST_USER_RNG', 'CONFIG_VIRTIO_PCI'], if_true: files('vhost-user-rng-pci.c'))
>+virtio_ss.add(when: 'CONFIG_VHOST_VDPA_DEV', if_true: files('vdpa-dev.c'))
>
> virtio_pci_ss = ss.source_set()
> virtio_pci_ss.add(when: 'CONFIG_VHOST_VSOCK', if_true: files('vhost-vsock-pci.c'))
>diff --git a/hw/virtio/vdpa-dev.c b/hw/virtio/vdpa-dev.c
>new file mode 100644
>index 0000000000..56597c881a
>--- /dev/null
>+++ b/hw/virtio/vdpa-dev.c
>@@ -0,0 +1,377 @@
>+/*
>+ * Vhost Vdpa Device
>+ *
>+ * Copyright (c) Huawei Technologies Co., Ltd. 2022. All Rights Reserved.
>+ *
>+ * Authors:
>+ * Longpeng <longpeng2@huawei.com>
>+ *
>+ * Largely based on the "vhost-user-blk-pci.c" and "vhost-user-blk.c" implemented by:
>+ * Changpeng Liu <changpeng.liu@intel.com>
>+ *
>+ * This work is licensed under the terms of the GNU LGPL, version 2 or later.
>+ * See the COPYING.LIB file in the top-level directory.
>+ */
>+#include "qemu/osdep.h"
>+#include <sys/ioctl.h>
>+#include <linux/vhost.h>
>+#include "qapi/error.h"
>+#include "qemu/error-report.h"
>+#include "qemu/cutils.h"
>+#include "hw/qdev-core.h"
>+#include "hw/qdev-properties.h"
>+#include "hw/qdev-properties-system.h"
>+#include "hw/virtio/vhost.h"
>+#include "hw/virtio/virtio.h"
>+#include "hw/virtio/virtio-bus.h"
>+#include "hw/virtio/virtio-access.h"
>+#include "hw/virtio/vdpa-dev.h"
>+#include "sysemu/sysemu.h"
>+#include "sysemu/runstate.h"
>+
>+static void
>+vhost_vdpa_device_dummy_handle_output(VirtIODevice *vdev, VirtQueue *vq)
>+{
>+ /* Nothing to do */
>+}
>+
>+static uint32_t
>+vhost_vdpa_device_get_u32(int fd, unsigned long int cmd, Error **errp)
>+{
>+ uint32_t val = (uint32_t)-1;
>+
>+ if (ioctl(fd, cmd, &val) < 0) {
>+ error_setg(errp, "vhost-vdpa-device: cmd 0x%lx failed: %s",
>+ cmd, strerror(errno));
>+ }
>+
>+ return val;
>+}
>+
>+static void vhost_vdpa_device_realize(DeviceState *dev, Error **errp)
>+{
>+ VirtIODevice *vdev = VIRTIO_DEVICE(dev);
>+ VhostVdpaDevice *v = VHOST_VDPA_DEVICE(vdev);
>+ uint16_t max_queue_size;
>+ struct vhost_virtqueue *vqs;
>+ int i, ret;
>+
>+ if (!v->vhostdev) {
>+ error_setg(errp, "vhost-vdpa-device: vhostdev are missing");
>+ return;
>+ }
>+
>+ v->vhostfd = qemu_open(v->vhostdev, O_RDWR, errp);
>+ if (*errp) {
>+ return;
>+ }
>+ v->vdpa.device_fd = v->vhostfd;
>+
>+ v->vdev_id = vhost_vdpa_device_get_u32(v->vhostfd,
>+ VHOST_VDPA_GET_DEVICE_ID, errp);
>+ if (*errp) {
>+ goto out;
>+ }
>+
>+ max_queue_size = vhost_vdpa_device_get_u32(v->vhostfd,
>+ VHOST_VDPA_GET_VRING_NUM, errp);
>+ if (*errp) {
>+ goto out;
>+ }
>+
>+ if (v->queue_size > max_queue_size) {
>+ error_setg(errp, "vhost-vdpa-device: invalid queue_size: %u (max:%u)",
>+ v->queue_size, max_queue_size);
>+ goto out;
>+ } else if (!v->queue_size) {
>+ v->queue_size = max_queue_size;
>+ }
>+
>+ v->num_queues = vhost_vdpa_device_get_u32(v->vhostfd,
>+ VHOST_VDPA_GET_VQS_COUNT, errp);
>+ if (*errp) {
>+ goto out;
>+ }
>+
>+ if (!v->num_queues || v->num_queues > VIRTIO_QUEUE_MAX) {
>+ error_setg(errp, "invalid number of virtqueues: %u (max:%u)",
>+ v->num_queues, VIRTIO_QUEUE_MAX);
>+ goto out;
>+ }
>+
>+ v->dev.nvqs = v->num_queues;
>+ vqs = g_new0(struct vhost_virtqueue, v->dev.nvqs);
>+ v->dev.vqs = vqs;
>+ v->dev.vq_index = 0;
>+ v->dev.vq_index_end = v->dev.nvqs;
>+ v->dev.backend_features = 0;
>+ v->started = false;
>+
>+ ret = vhost_dev_init(&v->dev, &v->vdpa, VHOST_BACKEND_TYPE_VDPA, 0, NULL);
>+ if (ret < 0) {
>+ error_setg(errp, "vhost-vdpa-device: vhost initialization failed: %s",
>+ strerror(-ret));
>+ goto free_vqs;
>+ }
>+
>+ v->config_size = vhost_vdpa_device_get_u32(v->vhostfd,
>+ VHOST_VDPA_GET_CONFIG_SIZE, errp);
>+ if (*errp) {
>+ goto vhost_cleanup;
>+ }
>+
>+ if (v->post_init && v->post_init(v, errp) < 0) {
>+ goto free_virtio;
This goto seems wrong.
Either we use the `vhost_cleanup` label or we move this block just
before return as it seems to me was in v3.
Out of curiosity, is there a reason for this change from v3 or was a
simple mistake as a consequence of patch reorganization?
Since I think v6 is needed, checkpatch has some warnings for exceeding
80 characters, maybe some of them can be easily fixed.
The rest LGTM, I think we are in a good shape :-)
Thanks,
Stefano
>+ }
>+
>+ v->config = g_malloc0(v->config_size);
>+
>+ ret = vhost_dev_get_config(&v->dev, v->config, v->config_size, NULL);
>+ if (ret < 0) {
>+ error_setg(errp, "vhost-vdpa-device: get config failed");
>+ goto free_config;
>+ }
>+
>+ virtio_init(vdev, "vhost-vdpa", v->vdev_id, v->config_size);
>+
>+ v->virtqs = g_new0(VirtQueue *, v->dev.nvqs);
>+ for (i = 0; i < v->dev.nvqs; i++) {
>+ v->virtqs[i] = virtio_add_queue(vdev, v->queue_size,
>+ vhost_vdpa_device_dummy_handle_output);
>+ }
>+
>+ return;
>+
>+free_virtio:
>+ for (i = 0; i < v->num_queues; i++) {
>+ virtio_delete_queue(v->virtqs[i]);
>+ }
>+ g_free(v->virtqs);
>+ virtio_cleanup(vdev);
>+free_config:
>+ g_free(v->config);
>+vhost_cleanup:
>+ vhost_dev_cleanup(&v->dev);
>+free_vqs:
>+ g_free(vqs);
>+out:
>+ qemu_close(v->vhostfd);
>+ v->vhostfd = -1;
>+}
>+
>+static void vhost_vdpa_device_unrealize(DeviceState *dev)
>+{
>+ VirtIODevice *vdev = VIRTIO_DEVICE(dev);
>+ VhostVdpaDevice *s = VHOST_VDPA_DEVICE(vdev);
>+ int i;
>+
>+ virtio_set_status(vdev, 0);
>+
>+ for (i = 0; i < s->num_queues; i++) {
>+ virtio_delete_queue(s->virtqs[i]);
>+ }
>+ g_free(s->virtqs);
>+ virtio_cleanup(vdev);
>+
>+ g_free(s->config);
>+ g_free(s->dev.vqs);
>+ vhost_dev_cleanup(&s->dev);
>+ qemu_close(s->vhostfd);
>+ s->vhostfd = -1;
>+}
>+
>+static void
>+vhost_vdpa_device_get_config(VirtIODevice *vdev, uint8_t *config)
>+{
>+ VhostVdpaDevice *s = VHOST_VDPA_DEVICE(vdev);
>+
>+ memcpy(config, s->config, s->config_size);
>+}
>+
>+static void
>+vhost_vdpa_device_set_config(VirtIODevice *vdev, const uint8_t *config)
>+{
>+ VhostVdpaDevice *s = VHOST_VDPA_DEVICE(vdev);
>+ int ret;
>+
>+ ret = vhost_dev_set_config(&s->dev, s->config, 0, s->config_size,
>+ VHOST_SET_CONFIG_TYPE_MASTER);
>+ if (ret) {
>+ error_report("set device config space failed");
>+ return;
>+ }
>+}
>+
>+static uint64_t vhost_vdpa_device_get_features(VirtIODevice *vdev,
>+ uint64_t features,
>+ Error **errp)
>+{
>+ VhostVdpaDevice *s = VHOST_VDPA_DEVICE(vdev);
>+ uint64_t backend_features = s->dev.features;
>+
>+ if (!virtio_has_feature(features, VIRTIO_F_IOMMU_PLATFORM)) {
>+ virtio_clear_feature(&backend_features, VIRTIO_F_IOMMU_PLATFORM);
>+ }
>+
>+ return backend_features;
>+}
>+
>+static int vhost_vdpa_device_start(VirtIODevice *vdev, Error **errp)
>+{
>+ VhostVdpaDevice *s = VHOST_VDPA_DEVICE(vdev);
>+ BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev)));
>+ VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
>+ int i, ret;
>+
>+ if (!k->set_guest_notifiers) {
>+ error_setg(errp, "binding does not support guest notifiers");
>+ return -ENOSYS;
>+ }
>+
>+ ret = vhost_dev_enable_notifiers(&s->dev, vdev);
>+ if (ret < 0) {
>+ error_setg_errno(errp, -ret, "Error enabling host notifiers");
>+ return ret;
>+ }
>+
>+ ret = k->set_guest_notifiers(qbus->parent, s->dev.nvqs, true);
>+ if (ret < 0) {
>+ error_setg_errno(errp, -ret, "Error binding guest notifier");
>+ goto err_host_notifiers;
>+ }
>+
>+ s->dev.acked_features = vdev->guest_features;
>+
>+ ret = vhost_dev_start(&s->dev, vdev);
>+ if (ret < 0) {
>+ error_setg_errno(errp, -ret, "Error starting vhost");
>+ goto err_guest_notifiers;
>+ }
>+ s->started = true;
>+
>+ /*
>+ * guest_notifier_mask/pending not used yet, so just unmask
>+ * everything here. virtio-pci will do the right thing by
>+ * enabling/disabling irqfd.
>+ */
>+ for (i = 0; i < s->dev.nvqs; i++) {
>+ vhost_virtqueue_mask(&s->dev, vdev, i, false);
>+ }
>+
>+ return ret;
>+
>+err_guest_notifiers:
>+ k->set_guest_notifiers(qbus->parent, s->dev.nvqs, false);
>+err_host_notifiers:
>+ vhost_dev_disable_notifiers(&s->dev, vdev);
>+ return ret;
>+}
>+
>+static void vhost_vdpa_device_stop(VirtIODevice *vdev)
>+{
>+ VhostVdpaDevice *s = VHOST_VDPA_DEVICE(vdev);
>+ BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev)));
>+ VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
>+ int ret;
>+
>+ if (!s->started) {
>+ return;
>+ }
>+ s->started = false;
>+
>+ if (!k->set_guest_notifiers) {
>+ return;
>+ }
>+
>+ vhost_dev_stop(&s->dev, vdev);
>+
>+ ret = k->set_guest_notifiers(qbus->parent, s->dev.nvqs, false);
>+ if (ret < 0) {
>+ error_report("vhost guest notifier cleanup failed: %d", ret);
>+ return;
>+ }
>+
>+ vhost_dev_disable_notifiers(&s->dev, vdev);
>+}
>+
>+static void vhost_vdpa_device_set_status(VirtIODevice *vdev, uint8_t status)
>+{
>+ VhostVdpaDevice *s = VHOST_VDPA_DEVICE(vdev);
>+ bool should_start = virtio_device_started(vdev, status);
>+ Error *local_err = NULL;
>+ int ret;
>+
>+ if (!vdev->vm_running) {
>+ should_start = false;
>+ }
>+
>+ if (s->started == should_start) {
>+ return;
>+ }
>+
>+ if (should_start) {
>+ ret = vhost_vdpa_device_start(vdev, &local_err);
>+ if (ret < 0) {
>+ error_reportf_err(local_err, "vhost-vdpa-device: start failed: ");
>+ }
>+ } else {
>+ vhost_vdpa_device_stop(vdev);
>+ }
>+}
>+
>+static Property vhost_vdpa_device_properties[] = {
>+ DEFINE_PROP_STRING("vhostdev", VhostVdpaDevice, vhostdev),
>+ DEFINE_PROP_UINT16("queue-size", VhostVdpaDevice, queue_size, 0),
>+ DEFINE_PROP_END_OF_LIST(),
>+};
>+
>+static const VMStateDescription vmstate_vhost_vdpa_device = {
>+ .name = "vhost-vdpa-device",
>+ .unmigratable = 1,
>+ .minimum_version_id = 1,
>+ .version_id = 1,
>+ .fields = (VMStateField[]) {
>+ VMSTATE_VIRTIO_DEVICE,
>+ VMSTATE_END_OF_LIST()
>+ },
>+};
>+
>+static void vhost_vdpa_device_class_init(ObjectClass *klass, void *data)
>+{
>+ DeviceClass *dc = DEVICE_CLASS(klass);
>+ VirtioDeviceClass *vdc = VIRTIO_DEVICE_CLASS(klass);
>+
>+ device_class_set_props(dc, vhost_vdpa_device_properties);
>+ dc->desc = "VDPA-based generic device assignment";
>+ dc->vmsd = &vmstate_vhost_vdpa_device;
>+ set_bit(DEVICE_CATEGORY_MISC, dc->categories);
>+ vdc->realize = vhost_vdpa_device_realize;
>+ vdc->unrealize = vhost_vdpa_device_unrealize;
>+ vdc->get_config = vhost_vdpa_device_get_config;
>+ vdc->set_config = vhost_vdpa_device_set_config;
>+ vdc->get_features = vhost_vdpa_device_get_features;
>+ vdc->set_status = vhost_vdpa_device_set_status;
>+}
>+
>+static void vhost_vdpa_device_instance_init(Object *obj)
>+{
>+ VhostVdpaDevice *s = VHOST_VDPA_DEVICE(obj);
>+
>+ device_add_bootindex_property(obj, &s->bootindex, "bootindex",
>+ NULL, DEVICE(obj));
>+}
>+
>+static const TypeInfo vhost_vdpa_device_info = {
>+ .name = TYPE_VHOST_VDPA_DEVICE,
>+ .parent = TYPE_VIRTIO_DEVICE,
>+ .instance_size = sizeof(VhostVdpaDevice),
>+ .class_init = vhost_vdpa_device_class_init,
>+ .instance_init = vhost_vdpa_device_instance_init,
>+};
>+
>+static void register_vhost_vdpa_device_type(void)
>+{
>+ type_register_static(&vhost_vdpa_device_info);
>+}
>+
>+type_init(register_vhost_vdpa_device_type);
>diff --git a/include/hw/virtio/vdpa-dev.h b/include/hw/virtio/vdpa-dev.h
>new file mode 100644
>index 0000000000..4dbf98195c
>--- /dev/null
>+++ b/include/hw/virtio/vdpa-dev.h
>@@ -0,0 +1,43 @@
>+/*
>+ * Vhost Vdpa Device
>+ *
>+ * Copyright (c) Huawei Technologies Co., Ltd. 2022. All Rights Reserved.
>+ *
>+ * Authors:
>+ * Longpeng <longpeng2@huawei.com>
>+ *
>+ * Largely based on the "vhost-user-blk.h" implemented by:
>+ * Changpeng Liu <changpeng.liu@intel.com>
>+ *
>+ * This work is licensed under the terms of the GNU LGPL, version 2 or later.
>+ * See the COPYING.LIB file in the top-level directory.
>+ */
>+#ifndef _VHOST_VDPA_DEVICE_H
>+#define _VHOST_VDPA_DEVICE_H
>+
>+#include "hw/virtio/vhost.h"
>+#include "hw/virtio/vhost-vdpa.h"
>+#include "qom/object.h"
>+
>+
>+#define TYPE_VHOST_VDPA_DEVICE "vhost-vdpa-device"
>+OBJECT_DECLARE_SIMPLE_TYPE(VhostVdpaDevice, VHOST_VDPA_DEVICE)
>+
>+struct VhostVdpaDevice {
>+ VirtIODevice parent_obj;
>+ char *vhostdev;
>+ int vhostfd;
>+ int32_t bootindex;
>+ uint32_t vdev_id;
>+ uint32_t num_queues;
>+ struct vhost_dev dev;
>+ struct vhost_vdpa vdpa;
>+ VirtQueue **virtqs;
>+ uint8_t *config;
>+ int config_size;
>+ uint16_t queue_size;
>+ bool started;
>+ int (*post_init)(VhostVdpaDevice *v, Error **errp);
>+};
>+
>+#endif
>--
>2.23.0
>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v5 4/4] vdpa: add vdpa-dev-pci support
2022-05-12 6:21 ` [PATCH v5 4/4] vdpa: add vdpa-dev-pci support Longpeng(Mike) via
@ 2022-05-12 14:49 ` Stefano Garzarella
0 siblings, 0 replies; 11+ messages in thread
From: Stefano Garzarella @ 2022-05-12 14:49 UTC (permalink / raw)
To: Longpeng(Mike)
Cc: stefanha, mst, jasowang, cohuck, pbonzini, arei.gonglei, yechuan,
huangzhichao, qemu-devel
On Thu, May 12, 2022 at 02:21:03PM +0800, Longpeng(Mike) wrote:
>From: Longpeng <longpeng2@huawei.com>
>
>Supports vdpa-dev-pci, we can use the device as follow:
>
>-device vhost-vdpa-device-pci,vhostdev=/dev/vhost-vdpa-X
>
>Signed-off-by: Longpeng <longpeng2@huawei.com>
>---
> hw/virtio/meson.build | 1 +
> hw/virtio/vdpa-dev-pci.c | 101 +++++++++++++++++++++++++++++++++++++++
> 2 files changed, 102 insertions(+)
> create mode 100644 hw/virtio/vdpa-dev-pci.c
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v5 3/4] vdpa: add vdpa-dev support
2022-05-12 14:36 ` Stefano Garzarella
@ 2022-05-13 2:17 ` longpeng2--- via
2022-05-13 6:34 ` Stefano Garzarella
0 siblings, 1 reply; 11+ messages in thread
From: longpeng2--- via @ 2022-05-13 2:17 UTC (permalink / raw)
To: Stefano Garzarella
Cc: stefanha, mst, jasowang, cohuck, pbonzini, arei.gonglei, yechuan,
huangzhichao, qemu-devel
在 2022/5/12 22:36, Stefano Garzarella 写道:
> On Thu, May 12, 2022 at 02:21:02PM +0800, Longpeng(Mike) wrote:
>> From: Longpeng <longpeng2@huawei.com>
>>
>> Supports vdpa-dev, we can use the deivce directly:
>>
>> -M microvm -m 512m -smp 2 -kernel ... -initrd ... -device \
>> vhost-vdpa-device,vhostdev=/dev/vhost-vdpa-x
>>
>> Signed-off-by: Longpeng <longpeng2@huawei.com>
>> ---
>> hw/virtio/Kconfig | 5 +
>> hw/virtio/meson.build | 1 +
>> hw/virtio/vdpa-dev.c | 377 +++++++++++++++++++++++++++++++++++
>> include/hw/virtio/vdpa-dev.h | 43 ++++
>> 4 files changed, 426 insertions(+)
>> create mode 100644 hw/virtio/vdpa-dev.c
>> create mode 100644 include/hw/virtio/vdpa-dev.h
>>
>> diff --git a/hw/virtio/Kconfig b/hw/virtio/Kconfig
>> index c144d42f9b..724eb58a32 100644
>> --- a/hw/virtio/Kconfig
>> +++ b/hw/virtio/Kconfig
>> @@ -68,3 +68,8 @@ config VHOST_USER_RNG
>> bool
>> default y
>> depends on VIRTIO && VHOST_USER
>> +
>> +config VHOST_VDPA_DEV
>> + bool
>> + default y
>> + depends on VIRTIO && VHOST_VDPA && LINUX
>> diff --git a/hw/virtio/meson.build b/hw/virtio/meson.build
>> index 67dc77e00f..8f6f86db71 100644
>> --- a/hw/virtio/meson.build
>> +++ b/hw/virtio/meson.build
>> @@ -29,6 +29,7 @@ virtio_ss.add(when: 'CONFIG_VHOST_USER_I2C',
>> if_true: files('vhost-user-i2c.c'))
>> virtio_ss.add(when: ['CONFIG_VIRTIO_PCI', 'CONFIG_VHOST_USER_I2C'],
>> if_true: files('vhost-user-i2c-pci.c'))
>> virtio_ss.add(when: 'CONFIG_VHOST_USER_RNG', if_true:
>> files('vhost-user-rng.c'))
>> virtio_ss.add(when: ['CONFIG_VHOST_USER_RNG', 'CONFIG_VIRTIO_PCI'],
>> if_true: files('vhost-user-rng-pci.c'))
>> +virtio_ss.add(when: 'CONFIG_VHOST_VDPA_DEV', if_true:
>> files('vdpa-dev.c'))
>>
>> virtio_pci_ss = ss.source_set()
>> virtio_pci_ss.add(when: 'CONFIG_VHOST_VSOCK', if_true:
>> files('vhost-vsock-pci.c'))
>> diff --git a/hw/virtio/vdpa-dev.c b/hw/virtio/vdpa-dev.c
>> new file mode 100644
>> index 0000000000..56597c881a
>> --- /dev/null
>> +++ b/hw/virtio/vdpa-dev.c
>> @@ -0,0 +1,377 @@
>> +/*
>> + * Vhost Vdpa Device
>> + *
>> + * Copyright (c) Huawei Technologies Co., Ltd. 2022. All Rights
>> Reserved.
>> + *
>> + * Authors:
>> + * Longpeng <longpeng2@huawei.com>
>> + *
>> + * Largely based on the "vhost-user-blk-pci.c" and "vhost-user-blk.c"
>> implemented by:
>> + * Changpeng Liu <changpeng.liu@intel.com>
>> + *
>> + * This work is licensed under the terms of the GNU LGPL, version 2
>> or later.
>> + * See the COPYING.LIB file in the top-level directory.
>> + */
>> +#include "qemu/osdep.h"
>> +#include <sys/ioctl.h>
>> +#include <linux/vhost.h>
>> +#include "qapi/error.h"
>> +#include "qemu/error-report.h"
>> +#include "qemu/cutils.h"
>> +#include "hw/qdev-core.h"
>> +#include "hw/qdev-properties.h"
>> +#include "hw/qdev-properties-system.h"
>> +#include "hw/virtio/vhost.h"
>> +#include "hw/virtio/virtio.h"
>> +#include "hw/virtio/virtio-bus.h"
>> +#include "hw/virtio/virtio-access.h"
>> +#include "hw/virtio/vdpa-dev.h"
>> +#include "sysemu/sysemu.h"
>> +#include "sysemu/runstate.h"
>> +
>> +static void
>> +vhost_vdpa_device_dummy_handle_output(VirtIODevice *vdev, VirtQueue *vq)
>> +{
>> + /* Nothing to do */
>> +}
>> +
>> +static uint32_t
>> +vhost_vdpa_device_get_u32(int fd, unsigned long int cmd, Error **errp)
>> +{
>> + uint32_t val = (uint32_t)-1;
>> +
>> + if (ioctl(fd, cmd, &val) < 0) {
>> + error_setg(errp, "vhost-vdpa-device: cmd 0x%lx failed: %s",
>> + cmd, strerror(errno));
>> + }
>> +
>> + return val;
>> +}
>> +
>> +static void vhost_vdpa_device_realize(DeviceState *dev, Error **errp)
>> +{
>> + VirtIODevice *vdev = VIRTIO_DEVICE(dev);
>> + VhostVdpaDevice *v = VHOST_VDPA_DEVICE(vdev);
>> + uint16_t max_queue_size;
>> + struct vhost_virtqueue *vqs;
>> + int i, ret;
>> +
>> + if (!v->vhostdev) {
>> + error_setg(errp, "vhost-vdpa-device: vhostdev are missing");
>> + return;
>> + }
>> +
>> + v->vhostfd = qemu_open(v->vhostdev, O_RDWR, errp);
>> + if (*errp) {
>> + return;
>> + }
>> + v->vdpa.device_fd = v->vhostfd;
>> +
>> + v->vdev_id = vhost_vdpa_device_get_u32(v->vhostfd,
>> + VHOST_VDPA_GET_DEVICE_ID,
>> errp);
>> + if (*errp) {
>> + goto out;
>> + }
>> +
>> + max_queue_size = vhost_vdpa_device_get_u32(v->vhostfd,
>> +
>> VHOST_VDPA_GET_VRING_NUM, errp);
>> + if (*errp) {
>> + goto out;
>> + }
>> +
>> + if (v->queue_size > max_queue_size) {
>> + error_setg(errp, "vhost-vdpa-device: invalid queue_size: %u
>> (max:%u)",
>> + v->queue_size, max_queue_size);
>> + goto out;
>> + } else if (!v->queue_size) {
>> + v->queue_size = max_queue_size;
>> + }
>> +
>> + v->num_queues = vhost_vdpa_device_get_u32(v->vhostfd,
>> +
>> VHOST_VDPA_GET_VQS_COUNT, errp);
>> + if (*errp) {
>> + goto out;
>> + }
>> +
>> + if (!v->num_queues || v->num_queues > VIRTIO_QUEUE_MAX) {
>> + error_setg(errp, "invalid number of virtqueues: %u (max:%u)",
>> + v->num_queues, VIRTIO_QUEUE_MAX);
>> + goto out;
>> + }
>> +
>> + v->dev.nvqs = v->num_queues;
>> + vqs = g_new0(struct vhost_virtqueue, v->dev.nvqs);
>> + v->dev.vqs = vqs;
>> + v->dev.vq_index = 0;
>> + v->dev.vq_index_end = v->dev.nvqs;
>> + v->dev.backend_features = 0;
>> + v->started = false;
>> +
>> + ret = vhost_dev_init(&v->dev, &v->vdpa, VHOST_BACKEND_TYPE_VDPA,
>> 0, NULL);
>> + if (ret < 0) {
>> + error_setg(errp, "vhost-vdpa-device: vhost initialization
>> failed: %s",
>> + strerror(-ret));
>> + goto free_vqs;
>> + }
>> +
>> + v->config_size = vhost_vdpa_device_get_u32(v->vhostfd,
>> +
>> VHOST_VDPA_GET_CONFIG_SIZE, errp);
>> + if (*errp) {
>> + goto vhost_cleanup;
>> + }
>> +
>> + if (v->post_init && v->post_init(v, errp) < 0) {
>> + goto free_virtio;
>
> This goto seems wrong.
>
> Either we use the `vhost_cleanup` label or we move this block just
> before return as it seems to me was in v3.
>
Good catch. We should use 'vhost_cleanup' label here.
> Out of curiosity, is there a reason for this change from v3 or was a
> simple mistake as a consequence of patch reorganization?
>
We should invoke .post_init() before calling virtio_init() which would
use the fields of VirtIOPCIProxy.
> Since I think v6 is needed, checkpatch has some warnings for exceeding
> 80 characters, maybe some of them can be easily fixed.
>
OK, I'll fix them.
> The rest LGTM, I think we are in a good shape :-)
>
> Thanks,
> Stefano
>
>> + }
>> +
>> + v->config = g_malloc0(v->config_size);
>> +
>> + ret = vhost_dev_get_config(&v->dev, v->config, v->config_size,
>> NULL);
>> + if (ret < 0) {
>> + error_setg(errp, "vhost-vdpa-device: get config failed");
>> + goto free_config;
>> + }
>> +
>> + virtio_init(vdev, "vhost-vdpa", v->vdev_id, v->config_size);
>> +
>> + v->virtqs = g_new0(VirtQueue *, v->dev.nvqs);
>> + for (i = 0; i < v->dev.nvqs; i++) {
>> + v->virtqs[i] = virtio_add_queue(vdev, v->queue_size,
>> +
>> vhost_vdpa_device_dummy_handle_output);
>> + }
>> +
>> + return;
>> +
>> +free_virtio:
>> + for (i = 0; i < v->num_queues; i++) {
>> + virtio_delete_queue(v->virtqs[i]);
>> + }
>> + g_free(v->virtqs);
>> + virtio_cleanup(vdev);
>> +free_config:
>> + g_free(v->config);
>> +vhost_cleanup:
>> + vhost_dev_cleanup(&v->dev);
>> +free_vqs:
>> + g_free(vqs);
>> +out:
>> + qemu_close(v->vhostfd);
>> + v->vhostfd = -1;
>> +}
>> +
>> +static void vhost_vdpa_device_unrealize(DeviceState *dev)
>> +{
>> + VirtIODevice *vdev = VIRTIO_DEVICE(dev);
>> + VhostVdpaDevice *s = VHOST_VDPA_DEVICE(vdev);
>> + int i;
>> +
>> + virtio_set_status(vdev, 0);
>> +
>> + for (i = 0; i < s->num_queues; i++) {
>> + virtio_delete_queue(s->virtqs[i]);
>> + }
>> + g_free(s->virtqs);
>> + virtio_cleanup(vdev);
>> +
>> + g_free(s->config);
>> + g_free(s->dev.vqs);
>> + vhost_dev_cleanup(&s->dev);
>> + qemu_close(s->vhostfd);
>> + s->vhostfd = -1;
>> +}
>> +
>> +static void
>> +vhost_vdpa_device_get_config(VirtIODevice *vdev, uint8_t *config)
>> +{
>> + VhostVdpaDevice *s = VHOST_VDPA_DEVICE(vdev);
>> +
>> + memcpy(config, s->config, s->config_size);
>> +}
>> +
>> +static void
>> +vhost_vdpa_device_set_config(VirtIODevice *vdev, const uint8_t *config)
>> +{
>> + VhostVdpaDevice *s = VHOST_VDPA_DEVICE(vdev);
>> + int ret;
>> +
>> + ret = vhost_dev_set_config(&s->dev, s->config, 0, s->config_size,
>> + VHOST_SET_CONFIG_TYPE_MASTER);
>> + if (ret) {
>> + error_report("set device config space failed");
>> + return;
>> + }
>> +}
>> +
>> +static uint64_t vhost_vdpa_device_get_features(VirtIODevice *vdev,
>> + uint64_t features,
>> + Error **errp)
>> +{
>> + VhostVdpaDevice *s = VHOST_VDPA_DEVICE(vdev);
>> + uint64_t backend_features = s->dev.features;
>> +
>> + if (!virtio_has_feature(features, VIRTIO_F_IOMMU_PLATFORM)) {
>> + virtio_clear_feature(&backend_features,
>> VIRTIO_F_IOMMU_PLATFORM);
>> + }
>> +
>> + return backend_features;
>> +}
>> +
>> +static int vhost_vdpa_device_start(VirtIODevice *vdev, Error **errp)
>> +{
>> + VhostVdpaDevice *s = VHOST_VDPA_DEVICE(vdev);
>> + BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev)));
>> + VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
>> + int i, ret;
>> +
>> + if (!k->set_guest_notifiers) {
>> + error_setg(errp, "binding does not support guest notifiers");
>> + return -ENOSYS;
>> + }
>> +
>> + ret = vhost_dev_enable_notifiers(&s->dev, vdev);
>> + if (ret < 0) {
>> + error_setg_errno(errp, -ret, "Error enabling host notifiers");
>> + return ret;
>> + }
>> +
>> + ret = k->set_guest_notifiers(qbus->parent, s->dev.nvqs, true);
>> + if (ret < 0) {
>> + error_setg_errno(errp, -ret, "Error binding guest notifier");
>> + goto err_host_notifiers;
>> + }
>> +
>> + s->dev.acked_features = vdev->guest_features;
>> +
>> + ret = vhost_dev_start(&s->dev, vdev);
>> + if (ret < 0) {
>> + error_setg_errno(errp, -ret, "Error starting vhost");
>> + goto err_guest_notifiers;
>> + }
>> + s->started = true;
>> +
>> + /*
>> + * guest_notifier_mask/pending not used yet, so just unmask
>> + * everything here. virtio-pci will do the right thing by
>> + * enabling/disabling irqfd.
>> + */
>> + for (i = 0; i < s->dev.nvqs; i++) {
>> + vhost_virtqueue_mask(&s->dev, vdev, i, false);
>> + }
>> +
>> + return ret;
>> +
>> +err_guest_notifiers:
>> + k->set_guest_notifiers(qbus->parent, s->dev.nvqs, false);
>> +err_host_notifiers:
>> + vhost_dev_disable_notifiers(&s->dev, vdev);
>> + return ret;
>> +}
>> +
>> +static void vhost_vdpa_device_stop(VirtIODevice *vdev)
>> +{
>> + VhostVdpaDevice *s = VHOST_VDPA_DEVICE(vdev);
>> + BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev)));
>> + VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
>> + int ret;
>> +
>> + if (!s->started) {
>> + return;
>> + }
>> + s->started = false;
>> +
>> + if (!k->set_guest_notifiers) {
>> + return;
>> + }
>> +
>> + vhost_dev_stop(&s->dev, vdev);
>> +
>> + ret = k->set_guest_notifiers(qbus->parent, s->dev.nvqs, false);
>> + if (ret < 0) {
>> + error_report("vhost guest notifier cleanup failed: %d", ret);
>> + return;
>> + }
>> +
>> + vhost_dev_disable_notifiers(&s->dev, vdev);
>> +}
>> +
>> +static void vhost_vdpa_device_set_status(VirtIODevice *vdev, uint8_t
>> status)
>> +{
>> + VhostVdpaDevice *s = VHOST_VDPA_DEVICE(vdev);
>> + bool should_start = virtio_device_started(vdev, status);
>> + Error *local_err = NULL;
>> + int ret;
>> +
>> + if (!vdev->vm_running) {
>> + should_start = false;
>> + }
>> +
>> + if (s->started == should_start) {
>> + return;
>> + }
>> +
>> + if (should_start) {
>> + ret = vhost_vdpa_device_start(vdev, &local_err);
>> + if (ret < 0) {
>> + error_reportf_err(local_err, "vhost-vdpa-device: start
>> failed: ");
>> + }
>> + } else {
>> + vhost_vdpa_device_stop(vdev);
>> + }
>> +}
>> +
>> +static Property vhost_vdpa_device_properties[] = {
>> + DEFINE_PROP_STRING("vhostdev", VhostVdpaDevice, vhostdev),
>> + DEFINE_PROP_UINT16("queue-size", VhostVdpaDevice, queue_size, 0),
>> + DEFINE_PROP_END_OF_LIST(),
>> +};
>> +
>> +static const VMStateDescription vmstate_vhost_vdpa_device = {
>> + .name = "vhost-vdpa-device",
>> + .unmigratable = 1,
>> + .minimum_version_id = 1,
>> + .version_id = 1,
>> + .fields = (VMStateField[]) {
>> + VMSTATE_VIRTIO_DEVICE,
>> + VMSTATE_END_OF_LIST()
>> + },
>> +};
>> +
>> +static void vhost_vdpa_device_class_init(ObjectClass *klass, void *data)
>> +{
>> + DeviceClass *dc = DEVICE_CLASS(klass);
>> + VirtioDeviceClass *vdc = VIRTIO_DEVICE_CLASS(klass);
>> +
>> + device_class_set_props(dc, vhost_vdpa_device_properties);
>> + dc->desc = "VDPA-based generic device assignment";
>> + dc->vmsd = &vmstate_vhost_vdpa_device;
>> + set_bit(DEVICE_CATEGORY_MISC, dc->categories);
>> + vdc->realize = vhost_vdpa_device_realize;
>> + vdc->unrealize = vhost_vdpa_device_unrealize;
>> + vdc->get_config = vhost_vdpa_device_get_config;
>> + vdc->set_config = vhost_vdpa_device_set_config;
>> + vdc->get_features = vhost_vdpa_device_get_features;
>> + vdc->set_status = vhost_vdpa_device_set_status;
>> +}
>> +
>> +static void vhost_vdpa_device_instance_init(Object *obj)
>> +{
>> + VhostVdpaDevice *s = VHOST_VDPA_DEVICE(obj);
>> +
>> + device_add_bootindex_property(obj, &s->bootindex, "bootindex",
>> + NULL, DEVICE(obj));
>> +}
>> +
>> +static const TypeInfo vhost_vdpa_device_info = {
>> + .name = TYPE_VHOST_VDPA_DEVICE,
>> + .parent = TYPE_VIRTIO_DEVICE,
>> + .instance_size = sizeof(VhostVdpaDevice),
>> + .class_init = vhost_vdpa_device_class_init,
>> + .instance_init = vhost_vdpa_device_instance_init,
>> +};
>> +
>> +static void register_vhost_vdpa_device_type(void)
>> +{
>> + type_register_static(&vhost_vdpa_device_info);
>> +}
>> +
>> +type_init(register_vhost_vdpa_device_type);
>> diff --git a/include/hw/virtio/vdpa-dev.h b/include/hw/virtio/vdpa-dev.h
>> new file mode 100644
>> index 0000000000..4dbf98195c
>> --- /dev/null
>> +++ b/include/hw/virtio/vdpa-dev.h
>> @@ -0,0 +1,43 @@
>> +/*
>> + * Vhost Vdpa Device
>> + *
>> + * Copyright (c) Huawei Technologies Co., Ltd. 2022. All Rights
>> Reserved.
>> + *
>> + * Authors:
>> + * Longpeng <longpeng2@huawei.com>
>> + *
>> + * Largely based on the "vhost-user-blk.h" implemented by:
>> + * Changpeng Liu <changpeng.liu@intel.com>
>> + *
>> + * This work is licensed under the terms of the GNU LGPL, version 2
>> or later.
>> + * See the COPYING.LIB file in the top-level directory.
>> + */
>> +#ifndef _VHOST_VDPA_DEVICE_H
>> +#define _VHOST_VDPA_DEVICE_H
>> +
>> +#include "hw/virtio/vhost.h"
>> +#include "hw/virtio/vhost-vdpa.h"
>> +#include "qom/object.h"
>> +
>> +
>> +#define TYPE_VHOST_VDPA_DEVICE "vhost-vdpa-device"
>> +OBJECT_DECLARE_SIMPLE_TYPE(VhostVdpaDevice, VHOST_VDPA_DEVICE)
>> +
>> +struct VhostVdpaDevice {
>> + VirtIODevice parent_obj;
>> + char *vhostdev;
>> + int vhostfd;
>> + int32_t bootindex;
>> + uint32_t vdev_id;
>> + uint32_t num_queues;
>> + struct vhost_dev dev;
>> + struct vhost_vdpa vdpa;
>> + VirtQueue **virtqs;
>> + uint8_t *config;
>> + int config_size;
>> + uint16_t queue_size;
>> + bool started;
>> + int (*post_init)(VhostVdpaDevice *v, Error **errp);
>> +};
>> +
>> +#endif
>> --
>> 2.23.0
>>
>
> .
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v5 2/4] virtio: get class_id and pci device id by the virtio id
2022-05-12 6:56 ` Michael S. Tsirkin
@ 2022-05-13 3:17 ` longpeng2--- via
0 siblings, 0 replies; 11+ messages in thread
From: longpeng2--- via @ 2022-05-13 3:17 UTC (permalink / raw)
To: Michael S. Tsirkin
Cc: stefanha, jasowang, sgarzare, cohuck, pbonzini, arei.gonglei,
yechuan, huangzhichao, qemu-devel
在 2022/5/12 14:56, Michael S. Tsirkin 写道:
> On Thu, May 12, 2022 at 02:21:01PM +0800, Longpeng(Mike) wrote:
>> From: Longpeng <longpeng2@huawei.com>
>>
>> Add helpers to get the "Transitional PCI Device ID" and "class_id"
>> of the device specified by the "Virtio Device ID".
>>
>> These helpers will be used to build the generic vDPA device later.
>>
>> Signed-off-by: Longpeng <longpeng2@huawei.com>
>
>
> Except, the IDs in the current header a broken. I just fixed them
> and they will be hopefully OK in the next version.
>
Do you mean this patch ?
```
virtio: fix virtio transitional ids
This commit fixes the transitional PCI device ID.
Fixes: d61914ea6ada ("virtio: update virtio id table, add transitional ids")
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Link: https://lore.kernel.org/r/20220510102723.87666-1-mie@igel.co.jp
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
```
Luckily, we use PCI_DEVICE_ID_VIRTIO_xxx instead of VIRTIO_TRANS_ID_xxx
here.
>> ---
>> hw/virtio/virtio-pci.c | 77 ++++++++++++++++++++++++++++++++++++++++++
>> hw/virtio/virtio-pci.h | 5 +++
>> 2 files changed, 82 insertions(+)
>>
>> diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c
>> index 7cf1231c1c..fdfa205cee 100644
>> --- a/hw/virtio/virtio-pci.c
>> +++ b/hw/virtio/virtio-pci.c
>> @@ -19,6 +19,7 @@
>>
>> #include "exec/memop.h"
>> #include "standard-headers/linux/virtio_pci.h"
>> +#include "standard-headers/linux/virtio_ids.h"
>> #include "hw/boards.h"
>> #include "hw/virtio/virtio.h"
>> #include "migration/qemu-file-types.h"
>> @@ -212,6 +213,79 @@ static int virtio_pci_load_queue(DeviceState *d, int n, QEMUFile *f)
>> return 0;
>> }
>>
>> +typedef struct VirtIOPCIIDInfo {
>> + /* virtio id */
>> + uint16_t vdev_id;
>> + /* pci device id for the transitional device */
>> + uint16_t trans_devid;
>> + uint16_t class_id;
>> +} VirtIOPCIIDInfo;
>> +
>> +#define VIRTIO_TRANS_DEV_ID_INFO(name, class) \
>> + { \
>> + .vdev_id = VIRTIO_ID_##name, \
>> + .trans_devid = PCI_DEVICE_ID_VIRTIO_##name, \
>> + .class_id = class, \
>> + }
>> +
>> +#define VIRTIO_MODERN_DEV_ID_NFO(name, class) \
>> + { \
>> + .vdev_id = VIRTIO_ID_##name, \
>> + .class_id = class, \
>> + }
>> +
>
> No, I think I liked the original approach in the RFC better, even though
> it duplicates a tiny bit of code.
> This trick does not save a lot of typing and obscures the ID
> use in case it's wrong (as was the case just recently).
>
OK, will do in v6.
Thanks.
>
>> +static const VirtIOPCIIDInfo virtio_pci_id_info[] = {
>> + /* Non-transitional devices */
>> + VIRTIO_MODERN_DEV_ID_NFO(CRYPTO, PCI_CLASS_OTHERS),
>> + VIRTIO_MODERN_DEV_ID_NFO(FS, PCI_CLASS_STORAGE_OTHER),
>> + /* Transitional devices */
>> + VIRTIO_TRANS_DEV_ID_INFO(NET, PCI_CLASS_NETWORK_ETHERNET),
>> + VIRTIO_TRANS_DEV_ID_INFO(BLOCK, PCI_CLASS_STORAGE_SCSI),
>> + VIRTIO_TRANS_DEV_ID_INFO(CONSOLE, PCI_CLASS_COMMUNICATION_OTHER),
>> + VIRTIO_TRANS_DEV_ID_INFO(SCSI, PCI_CLASS_STORAGE_SCSI),
>> + VIRTIO_TRANS_DEV_ID_INFO(9P, PCI_BASE_CLASS_NETWORK),
>> + VIRTIO_TRANS_DEV_ID_INFO(BALLOON, PCI_CLASS_OTHERS),
>> + VIRTIO_TRANS_DEV_ID_INFO(RNG, PCI_CLASS_OTHERS),
>> +};
>> +
>> +static const VirtIOPCIIDInfo *virtio_pci_get_id_info(uint16_t vdev_id)
>> +{
>> + const VirtIOPCIIDInfo *info = NULL;
>> + int i;
>> +
>> + for (i = 0; i < ARRAY_SIZE(virtio_pci_id_info); i++) {
>> + if (virtio_pci_id_info[i].vdev_id == vdev_id) {
>> + info = &virtio_pci_id_info[i];
>> + break;
>> + }
>> + }
>> +
>> + if (!info) {
>> + /* The device id is invalid or not added to the id_info yet. */
>> + error_report("Invalid virtio device(id %u)", vdev_id);
>> + abort();
>> + }
>> +
>> + return info;
>> +}
>> +
>> +/*
>> + * Get the Transitional Device ID for the specific device, return
>> + * zero if the device is non-transitional.
>> + */
>> +uint16_t virtio_pci_get_trans_devid(uint16_t device_id)
>> +{
>> + return virtio_pci_get_id_info(device_id)->trans_devid;
>> +}
>> +
>> +/*
>> + * Get the Class ID for the specific device.
>> + */
>> +uint16_t virtio_pci_get_class_id(uint16_t device_id)
>> +{
>> + return virtio_pci_get_id_info(device_id)->class_id;
>> +}
>> +
>> static bool virtio_pci_ioeventfd_enabled(DeviceState *d)
>> {
>> VirtIOPCIProxy *proxy = to_virtio_pci_proxy(d);
>> @@ -1675,6 +1749,9 @@ static void virtio_pci_device_plugged(DeviceState *d, Error **errp)
>> * is set to PCI_SUBVENDOR_ID_REDHAT_QUMRANET by default.
>> */
>> pci_set_word(config + PCI_SUBSYSTEM_ID, virtio_bus_get_vdev_id(bus));
>> + if (proxy->trans_devid) {
>> + pci_config_set_device_id(config, proxy->trans_devid);
>> + }
>> } else {
>> /* pure virtio-1.0 */
>> pci_set_word(config + PCI_VENDOR_ID,
>> diff --git a/hw/virtio/virtio-pci.h b/hw/virtio/virtio-pci.h
>> index 2446dcd9ae..f08665cd1b 100644
>> --- a/hw/virtio/virtio-pci.h
>> +++ b/hw/virtio/virtio-pci.h
>> @@ -146,6 +146,8 @@ struct VirtIOPCIProxy {
>> bool disable_modern;
>> bool ignore_backend_features;
>> OnOffAuto disable_legacy;
>> + /* Transitional device id */
>> + uint16_t trans_devid;
>> uint32_t class_code;
>> uint32_t nvectors;
>> uint32_t dfselect;
>> @@ -158,6 +160,9 @@ struct VirtIOPCIProxy {
>> VirtioBusState bus;
>> };
>>
>> +uint16_t virtio_pci_get_trans_devid(uint16_t device_id);
>> +uint16_t virtio_pci_get_class_id(uint16_t device_id);
>> +
>> static inline bool virtio_pci_modern(VirtIOPCIProxy *proxy)
>> {
>> return !proxy->disable_modern;
>> --
>> 2.23.0
>
>
> .
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v5 3/4] vdpa: add vdpa-dev support
2022-05-13 2:17 ` longpeng2--- via
@ 2022-05-13 6:34 ` Stefano Garzarella
0 siblings, 0 replies; 11+ messages in thread
From: Stefano Garzarella @ 2022-05-13 6:34 UTC (permalink / raw)
To: Longpeng (Mike, Cloud Infrastructure Service Product Dept.)
Cc: stefanha, mst, jasowang, cohuck, pbonzini, arei.gonglei, yechuan,
huangzhichao, qemu-devel
On Fri, May 13, 2022 at 10:17:41AM +0800, Longpeng (Mike, Cloud Infrastructure Service Product Dept.) wrote:
>
>
>在 2022/5/12 22:36, Stefano Garzarella 写道:
>>On Thu, May 12, 2022 at 02:21:02PM +0800, Longpeng(Mike) wrote:
>>>From: Longpeng <longpeng2@huawei.com>
>>>
>>>Supports vdpa-dev, we can use the deivce directly:
>>>
>>>-M microvm -m 512m -smp 2 -kernel ... -initrd ... -device \
>>>vhost-vdpa-device,vhostdev=/dev/vhost-vdpa-x
>>>
>>>Signed-off-by: Longpeng <longpeng2@huawei.com>
>>>---
>>>hw/virtio/Kconfig | 5 +
>>>hw/virtio/meson.build | 1 +
>>>hw/virtio/vdpa-dev.c | 377 +++++++++++++++++++++++++++++++++++
>>>include/hw/virtio/vdpa-dev.h | 43 ++++
>>>4 files changed, 426 insertions(+)
>>>create mode 100644 hw/virtio/vdpa-dev.c
>>>create mode 100644 include/hw/virtio/vdpa-dev.h
>>>
>>>diff --git a/hw/virtio/Kconfig b/hw/virtio/Kconfig
>>>index c144d42f9b..724eb58a32 100644
>>>--- a/hw/virtio/Kconfig
>>>+++ b/hw/virtio/Kconfig
>>>@@ -68,3 +68,8 @@ config VHOST_USER_RNG
>>> bool
>>> default y
>>> depends on VIRTIO && VHOST_USER
>>>+
>>>+config VHOST_VDPA_DEV
>>>+ bool
>>>+ default y
>>>+ depends on VIRTIO && VHOST_VDPA && LINUX
>>>diff --git a/hw/virtio/meson.build b/hw/virtio/meson.build
>>>index 67dc77e00f..8f6f86db71 100644
>>>--- a/hw/virtio/meson.build
>>>+++ b/hw/virtio/meson.build
>>>@@ -29,6 +29,7 @@ virtio_ss.add(when: 'CONFIG_VHOST_USER_I2C',
>>>if_true: files('vhost-user-i2c.c'))
>>>virtio_ss.add(when: ['CONFIG_VIRTIO_PCI',
>>>'CONFIG_VHOST_USER_I2C'], if_true: files('vhost-user-i2c-pci.c'))
>>>virtio_ss.add(when: 'CONFIG_VHOST_USER_RNG', if_true:
>>>files('vhost-user-rng.c'))
>>>virtio_ss.add(when: ['CONFIG_VHOST_USER_RNG',
>>>'CONFIG_VIRTIO_PCI'], if_true: files('vhost-user-rng-pci.c'))
>>>+virtio_ss.add(when: 'CONFIG_VHOST_VDPA_DEV', if_true:
>>>files('vdpa-dev.c'))
>>>
>>>virtio_pci_ss = ss.source_set()
>>>virtio_pci_ss.add(when: 'CONFIG_VHOST_VSOCK', if_true:
>>>files('vhost-vsock-pci.c'))
>>>diff --git a/hw/virtio/vdpa-dev.c b/hw/virtio/vdpa-dev.c
>>>new file mode 100644
>>>index 0000000000..56597c881a
>>>--- /dev/null
>>>+++ b/hw/virtio/vdpa-dev.c
>>>@@ -0,0 +1,377 @@
>>>+/*
>>>+ * Vhost Vdpa Device
>>>+ *
>>>+ * Copyright (c) Huawei Technologies Co., Ltd. 2022. All Rights
>>>Reserved.
>>>+ *
>>>+ * Authors:
>>>+ * Longpeng <longpeng2@huawei.com>
>>>+ *
>>>+ * Largely based on the "vhost-user-blk-pci.c" and
>>>"vhost-user-blk.c" implemented by:
>>>+ * Changpeng Liu <changpeng.liu@intel.com>
>>>+ *
>>>+ * This work is licensed under the terms of the GNU LGPL, version
>>>2 or later.
>>>+ * See the COPYING.LIB file in the top-level directory.
>>>+ */
>>>+#include "qemu/osdep.h"
>>>+#include <sys/ioctl.h>
>>>+#include <linux/vhost.h>
>>>+#include "qapi/error.h"
>>>+#include "qemu/error-report.h"
>>>+#include "qemu/cutils.h"
>>>+#include "hw/qdev-core.h"
>>>+#include "hw/qdev-properties.h"
>>>+#include "hw/qdev-properties-system.h"
>>>+#include "hw/virtio/vhost.h"
>>>+#include "hw/virtio/virtio.h"
>>>+#include "hw/virtio/virtio-bus.h"
>>>+#include "hw/virtio/virtio-access.h"
>>>+#include "hw/virtio/vdpa-dev.h"
>>>+#include "sysemu/sysemu.h"
>>>+#include "sysemu/runstate.h"
>>>+
>>>+static void
>>>+vhost_vdpa_device_dummy_handle_output(VirtIODevice *vdev, VirtQueue *vq)
>>>+{
>>>+ /* Nothing to do */
>>>+}
>>>+
>>>+static uint32_t
>>>+vhost_vdpa_device_get_u32(int fd, unsigned long int cmd, Error **errp)
>>>+{
>>>+ uint32_t val = (uint32_t)-1;
>>>+
>>>+ if (ioctl(fd, cmd, &val) < 0) {
>>>+ error_setg(errp, "vhost-vdpa-device: cmd 0x%lx failed: %s",
>>>+ cmd, strerror(errno));
>>>+ }
>>>+
>>>+ return val;
>>>+}
>>>+
>>>+static void vhost_vdpa_device_realize(DeviceState *dev, Error **errp)
>>>+{
>>>+ VirtIODevice *vdev = VIRTIO_DEVICE(dev);
>>>+ VhostVdpaDevice *v = VHOST_VDPA_DEVICE(vdev);
>>>+ uint16_t max_queue_size;
>>>+ struct vhost_virtqueue *vqs;
>>>+ int i, ret;
>>>+
>>>+ if (!v->vhostdev) {
>>>+ error_setg(errp, "vhost-vdpa-device: vhostdev are missing");
>>>+ return;
>>>+ }
>>>+
>>>+ v->vhostfd = qemu_open(v->vhostdev, O_RDWR, errp);
>>>+ if (*errp) {
>>>+ return;
>>>+ }
>>>+ v->vdpa.device_fd = v->vhostfd;
>>>+
>>>+ v->vdev_id = vhost_vdpa_device_get_u32(v->vhostfd,
>>>+
>>>VHOST_VDPA_GET_DEVICE_ID, errp);
>>>+ if (*errp) {
>>>+ goto out;
>>>+ }
>>>+
>>>+ max_queue_size = vhost_vdpa_device_get_u32(v->vhostfd,
>>>+
>>>VHOST_VDPA_GET_VRING_NUM, errp);
>>>+ if (*errp) {
>>>+ goto out;
>>>+ }
>>>+
>>>+ if (v->queue_size > max_queue_size) {
>>>+ error_setg(errp, "vhost-vdpa-device: invalid queue_size:
>>>%u (max:%u)",
>>>+ v->queue_size, max_queue_size);
>>>+ goto out;
>>>+ } else if (!v->queue_size) {
>>>+ v->queue_size = max_queue_size;
>>>+ }
>>>+
>>>+ v->num_queues = vhost_vdpa_device_get_u32(v->vhostfd,
>>>+
>>>VHOST_VDPA_GET_VQS_COUNT, errp);
>>>+ if (*errp) {
>>>+ goto out;
>>>+ }
>>>+
>>>+ if (!v->num_queues || v->num_queues > VIRTIO_QUEUE_MAX) {
>>>+ error_setg(errp, "invalid number of virtqueues: %u (max:%u)",
>>>+ v->num_queues, VIRTIO_QUEUE_MAX);
>>>+ goto out;
>>>+ }
>>>+
>>>+ v->dev.nvqs = v->num_queues;
>>>+ vqs = g_new0(struct vhost_virtqueue, v->dev.nvqs);
>>>+ v->dev.vqs = vqs;
>>>+ v->dev.vq_index = 0;
>>>+ v->dev.vq_index_end = v->dev.nvqs;
>>>+ v->dev.backend_features = 0;
>>>+ v->started = false;
>>>+
>>>+ ret = vhost_dev_init(&v->dev, &v->vdpa,
>>>VHOST_BACKEND_TYPE_VDPA, 0, NULL);
>>>+ if (ret < 0) {
>>>+ error_setg(errp, "vhost-vdpa-device: vhost initialization
>>>failed: %s",
>>>+ strerror(-ret));
>>>+ goto free_vqs;
>>>+ }
>>>+
>>>+ v->config_size = vhost_vdpa_device_get_u32(v->vhostfd,
>>>+
>>>VHOST_VDPA_GET_CONFIG_SIZE, errp);
>>>+ if (*errp) {
>>>+ goto vhost_cleanup;
>>>+ }
>>>+
>>>+ if (v->post_init && v->post_init(v, errp) < 0) {
>>>+ goto free_virtio;
>>
>>This goto seems wrong.
>>
>>Either we use the `vhost_cleanup` label or we move this block just
>>before return as it seems to me was in v3.
>>
>
>Good catch. We should use 'vhost_cleanup' label here.
Yep, so in that case we can remove the `free_virtio` label and the
related block.
>
>>Out of curiosity, is there a reason for this change from v3 or was a
>>simple mistake as a consequence of patch reorganization?
>>
>
>We should invoke .post_init() before calling virtio_init() which would
>use the fields of VirtIOPCIProxy.
Okay, so maybe a comment there would be helpful.
Thanks,
Stefano
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2022-05-13 7:23 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-05-12 6:20 [PATCH v5 0/4] add generic vDPA device support Longpeng(Mike) via
2022-05-12 6:21 ` [PATCH v5 1/4] linux-headers: Update headers to Linux 5.18-rc6 Longpeng(Mike) via
2022-05-12 6:21 ` [PATCH v5 2/4] virtio: get class_id and pci device id by the virtio id Longpeng(Mike) via
2022-05-12 6:56 ` Michael S. Tsirkin
2022-05-13 3:17 ` longpeng2--- via
2022-05-12 6:21 ` [PATCH v5 3/4] vdpa: add vdpa-dev support Longpeng(Mike) via
2022-05-12 14:36 ` Stefano Garzarella
2022-05-13 2:17 ` longpeng2--- via
2022-05-13 6:34 ` Stefano Garzarella
2022-05-12 6:21 ` [PATCH v5 4/4] vdpa: add vdpa-dev-pci support Longpeng(Mike) via
2022-05-12 14:49 ` Stefano Garzarella
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.