From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Mikhail Zhilkin <csharper2005@gmail.com>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>,
NOGUCHI Hiroshi <drvlabo@gmail.com>,
INAGAKI Hiroshi <musashino.open@gmail.com>,
linux-kernel@vger.kernel.org, linux-mtd@lists.infradead.org,
Karim <Karimdplay@gmail.com>, M <x1@disroot.org>
Subject: Re: [PATCH v3 3/3] mtd: parsers: add support for Sercomm partitions
Date: Thu, 12 May 2022 17:27:20 +0200 [thread overview]
Message-ID: <20220512152720.244806-1-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20220503155140.2339899-1-csharper2005@gmail.com>
On Tue, 2022-05-03 at 15:51:40 UTC, Mikhail Zhilkin wrote:
> This adds an MTD partition parser for the Sercomm partition table that
> is used in some Beeline, Netgear and Sercomm routers.
>
> The Sercomm partition map table contains real partition offsets, which
> may differ from device to device depending on the number and location of
> bad blocks on NAND.
>
> This is essentially the same code as proposed by NOGUCHI Hiroshi:
> Link: https://github.com/openwrt/openwrt/pull/1318#issuecomment-420607394
>
> Signed-off-by: NOGUCHI Hiroshi <drvlabo@gmail.com>
> Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next, thanks.
Miquel
WARNING: multiple messages have this Message-ID (diff)
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Mikhail Zhilkin <csharper2005@gmail.com>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>,
NOGUCHI Hiroshi <drvlabo@gmail.com>,
INAGAKI Hiroshi <musashino.open@gmail.com>,
linux-kernel@vger.kernel.org, linux-mtd@lists.infradead.org,
Karim <Karimdplay@gmail.com>, M <x1@disroot.org>
Subject: Re: [PATCH v3 3/3] mtd: parsers: add support for Sercomm partitions
Date: Thu, 12 May 2022 17:27:20 +0200 [thread overview]
Message-ID: <20220512152720.244806-1-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20220503155140.2339899-1-csharper2005@gmail.com>
On Tue, 2022-05-03 at 15:51:40 UTC, Mikhail Zhilkin wrote:
> This adds an MTD partition parser for the Sercomm partition table that
> is used in some Beeline, Netgear and Sercomm routers.
>
> The Sercomm partition map table contains real partition offsets, which
> may differ from device to device depending on the number and location of
> bad blocks on NAND.
>
> This is essentially the same code as proposed by NOGUCHI Hiroshi:
> Link: https://github.com/openwrt/openwrt/pull/1318#issuecomment-420607394
>
> Signed-off-by: NOGUCHI Hiroshi <drvlabo@gmail.com>
> Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git mtd/next, thanks.
Miquel
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2022-05-12 15:27 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-03 15:42 [PATCH v3 0/3] mtd: parsers: add support for Sercomm partitions Mikhail Zhilkin
2022-05-03 15:42 ` Mikhail Zhilkin
2022-05-03 15:47 ` [PATCH v3 1/3] dt-bindings: Add Sercomm (Suzhou) Corporation vendor prefix Mikhail Zhilkin
2022-05-04 15:07 ` Krzysztof Kozlowski
2022-05-03 15:50 ` [PATCH v3 2/3] dt-bindings: mtd: partitions: Extend fixed-partitions binding Mikhail Zhilkin
2022-05-03 15:50 ` Mikhail Zhilkin
2022-05-04 15:07 ` Krzysztof Kozlowski
2022-05-04 15:07 ` Krzysztof Kozlowski
2022-05-12 15:27 ` Miquel Raynal
2022-05-12 15:27 ` Miquel Raynal
2022-05-13 14:12 ` Rob Herring
2022-05-13 14:12 ` Rob Herring
2022-05-16 8:21 ` Miquel Raynal
2022-05-16 8:21 ` Miquel Raynal
2022-05-16 15:34 ` Mikhail Zhilkin
2022-05-16 15:34 ` Mikhail Zhilkin
2022-05-16 15:39 ` Krzysztof Kozlowski
2022-05-16 15:39 ` Krzysztof Kozlowski
2022-05-03 15:51 ` [PATCH v3 3/3] mtd: parsers: add support for Sercomm partitions Mikhail Zhilkin
2022-05-03 15:51 ` Mikhail Zhilkin
2022-05-12 15:27 ` Miquel Raynal [this message]
2022-05-12 15:27 ` Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220512152720.244806-1-miquel.raynal@bootlin.com \
--to=miquel.raynal@bootlin.com \
--cc=Karimdplay@gmail.com \
--cc=csharper2005@gmail.com \
--cc=drvlabo@gmail.com \
--cc=hauke@hauke-m.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=musashino.open@gmail.com \
--cc=richard@nod.at \
--cc=vigneshr@ti.com \
--cc=x1@disroot.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.