[PATCH v7 25/28] media: ov5640: Restrict sizes to mbus code

[Jacopo Mondi <jacopo@jmondi.org>]

The ov5640 driver supports different sizes for different mbus_codes.
In particular:

- 8bpp modes: high resolution sizes (>= 1280x720)
- 16bpp modes: all sizes
- 24bpp modes: low resolutions sizes (< 1280x720)

Restrict the frame sizes enumerations to the above constraints.

While at it, make sure the fse->mbus_code parameter is valid, and return
-EINVAL if it's not.

Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/i2c/ov5640.c | 20 +++++++++++++++++---
 1 file changed, 17 insertions(+), 3 deletions(-)

diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index a1c00e7781d5..125ada9ae5fc 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -3474,14 +3474,28 @@ static int ov5640_enum_frame_size(struct v4l2_subdev *sd,
 				  struct v4l2_subdev_state *sd_state,
 				  struct v4l2_subdev_frame_size_enum *fse)
 {
+	u32 bpp = ov5640_code_to_bpp(fse->code);
+	unsigned int index = fse->index;
+
 	if (fse->pad != 0)
 		return -EINVAL;
-	if (fse->index >= OV5640_NUM_MODES)
+	if (!bpp)
+		return -EINVAL;
+
+	/* Only low-resolution modes are supported for 24bpp formats. */
+	if (bpp == 24 && index >= OV5640_MODE_720P_1280_720)
+		return -EINVAL;
+
+	/* FIXME: Low resolution modes don't work in 8bpp formats. */
+	if (bpp == 8)
+		index += OV5640_MODE_720P_1280_720;
+
+	if (index >= OV5640_NUM_MODES)
 		return -EINVAL;
 
-	fse->min_width = ov5640_mode_data[fse->index].width;
+	fse->min_width = ov5640_mode_data[index].width;
 	fse->max_width = fse->min_width;
-	fse->min_height = ov5640_mode_data[fse->index].height;
+	fse->min_height = ov5640_mode_data[index].height;
 	fse->max_height = fse->min_height;
 
 	return 0;
-- 
2.35.1