From: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> To: <ath11k@lists.infradead.org> Cc: <linux-wireless@vger.kernel.org>, Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Subject: [PATCH] ath11k: Init hw_params before setting up AHB resources Date: Tue, 17 May 2022 11:22:41 +0530 [thread overview] Message-ID: <20220517055241.15885-1-quic_mpubbise@quicinc.com> (raw) As part of adding the support of WCN6750 to ath11k, bus_params were moved to hw_params and this regressed the initialization of WCN6750. By the time AHB resources are setup for WCN6750, hw_params will not be initialized and therefore initialization for WCN6750 will fail. This is applicable only for WCN6750, no other device is impacted. Fix this by moving the initialization of hw_params before setting up AHB resources. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Fixes: 00402f49d26f ("ath11k: Add support for WCN6750 device") Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> --- drivers/net/wireless/ath/ath11k/ahb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath11k/ahb.c b/drivers/net/wireless/ath/ath11k/ahb.c index fa11807f48a9..d7d33d5cdfc5 100644 --- a/drivers/net/wireless/ath/ath11k/ahb.c +++ b/drivers/net/wireless/ath/ath11k/ahb.c @@ -976,11 +976,11 @@ static int ath11k_ahb_probe(struct platform_device *pdev) ab->hw_rev = hw_rev; platform_set_drvdata(pdev, ab); - ret = ath11k_ahb_setup_resources(ab); + ret = ath11k_core_pre_init(ab); if (ret) goto err_core_free; - ret = ath11k_core_pre_init(ab); + ret = ath11k_ahb_setup_resources(ab); if (ret) goto err_core_free; -- 2.35.1
WARNING: multiple messages have this Message-ID (diff)
From: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> To: <ath11k@lists.infradead.org> Cc: <linux-wireless@vger.kernel.org>, Manikanta Pubbisetty <quic_mpubbise@quicinc.com> Subject: [PATCH] ath11k: Init hw_params before setting up AHB resources Date: Tue, 17 May 2022 11:22:41 +0530 [thread overview] Message-ID: <20220517055241.15885-1-quic_mpubbise@quicinc.com> (raw) As part of adding the support of WCN6750 to ath11k, bus_params were moved to hw_params and this regressed the initialization of WCN6750. By the time AHB resources are setup for WCN6750, hw_params will not be initialized and therefore initialization for WCN6750 will fail. This is applicable only for WCN6750, no other device is impacted. Fix this by moving the initialization of hw_params before setting up AHB resources. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1 Fixes: 00402f49d26f ("ath11k: Add support for WCN6750 device") Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com> --- drivers/net/wireless/ath/ath11k/ahb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath11k/ahb.c b/drivers/net/wireless/ath/ath11k/ahb.c index fa11807f48a9..d7d33d5cdfc5 100644 --- a/drivers/net/wireless/ath/ath11k/ahb.c +++ b/drivers/net/wireless/ath/ath11k/ahb.c @@ -976,11 +976,11 @@ static int ath11k_ahb_probe(struct platform_device *pdev) ab->hw_rev = hw_rev; platform_set_drvdata(pdev, ab); - ret = ath11k_ahb_setup_resources(ab); + ret = ath11k_core_pre_init(ab); if (ret) goto err_core_free; - ret = ath11k_core_pre_init(ab); + ret = ath11k_ahb_setup_resources(ab); if (ret) goto err_core_free; -- 2.35.1 -- ath11k mailing list ath11k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath11k
next reply other threads:[~2022-05-17 5:53 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-05-17 5:52 Manikanta Pubbisetty [this message] 2022-05-17 5:52 ` [PATCH] ath11k: Init hw_params before setting up AHB resources Manikanta Pubbisetty 2022-05-22 12:30 ` Kalle Valo 2022-05-22 12:30 ` Kalle Valo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220517055241.15885-1-quic_mpubbise@quicinc.com \ --to=quic_mpubbise@quicinc.com \ --cc=ath11k@lists.infradead.org \ --cc=linux-wireless@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.