[PATCH 1/2] dt-bindings: leds: lp50xx: correct reg/unit addresses in example

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Pavel Machek <pavel@ucw.cz>, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Dan Murphy <dmurphy@ti.com>,
	Jacek Anaszewski <jacek.anaszewski@gmail.com>,
	Sven Schwermer <sven.schwermer@disruptive-technologies.com>,
	linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
	Kyle Swenson <kyle.swenson@est.tech>
Subject: [PATCH 1/2] dt-bindings: leds: lp50xx: correct reg/unit addresses in example
Date: Wed, 18 May 2022 10:22:14 +0200	[thread overview]
Message-ID: <20220518082215.14358-1-krzysztof.kozlowski@linaro.org> (raw)

The multi-led node defined address/size cells, so it intended to have
children with unit addresses.

The second multi-led's reg property defined three LED indexes within one
reg item, which is not correct - these are three separate items.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Cc: Kyle Swenson <kyle.swenson@est.tech>
---
 .../devicetree/bindings/leds/leds-lp50xx.yaml | 22 ++++++++++++-------
 1 file changed, 14 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
index f12fe5b53f30..dc1ac905bb91 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
@@ -99,35 +99,41 @@ examples:
                color = <LED_COLOR_ID_RGB>;
                function = LED_FUNCTION_CHARGING;
 
-               led-0 {
+               led@0 {
+                   reg = <0x0>;
                    color = <LED_COLOR_ID_RED>;
                };
 
-               led-1 {
+               led@1 {
+                   reg = <0x1>;
                    color = <LED_COLOR_ID_GREEN>;
                };
 
-               led-2 {
+               led@2 {
+                   reg = <0x2>;
                    color = <LED_COLOR_ID_BLUE>;
                };
           };
 
           multi-led@2 {
             #address-cells = <1>;
-            #size-cells = <2>;
-            reg = <0x2 0x3 0x5>;
+            #size-cells = <0>;
+            reg = <0x3>, <0x4>, <0x5>;
             color = <LED_COLOR_ID_RGB>;
             function = LED_FUNCTION_STANDBY;
 
-            led-6 {
+            led@3 {
+              reg = <0x3>;
               color = <LED_COLOR_ID_RED>;
             };
 
-            led-7 {
+            led@4 {
+              reg = <0x4>;
               color = <LED_COLOR_ID_GREEN>;
             };
 
-            led-8 {
+            led@5 {
+              reg = <0x5>;
               color = <LED_COLOR_ID_BLUE>;
             };
          };
-- 
2.32.0

