From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Pavel Machek <pavel@ucw.cz>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Dan Murphy <dmurphy@ti.com>,
Jacek Anaszewski <jacek.anaszewski@gmail.com>,
Sven Schwermer <sven.schwermer@disruptive-technologies.com>,
linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Kyle Swenson <kyle.swenson@est.tech>
Subject: [PATCH 2/2] dt-bindings: leds: fix indentation in examples
Date: Wed, 18 May 2022 10:22:15 +0200 [thread overview]
Message-ID: <20220518082215.14358-2-krzysztof.kozlowski@linaro.org> (raw)
In-Reply-To: <20220518082215.14358-1-krzysztof.kozlowski@linaro.org>
The examples were mixing 4-space with 2- and 3-space indentations, so
correct them to use 4-space one. No functional change.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Cc: Kyle Swenson <kyle.swenson@est.tech>
---
.../devicetree/bindings/leds/leds-lp50xx.yaml | 110 ++++-----
.../devicetree/bindings/leds/leds-lp55xx.yaml | 222 +++++++++---------
.../bindings/leds/leds-pwm-multicolor.yaml | 36 +--
3 files changed, 184 insertions(+), 184 deletions(-)
diff --git a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
index dc1ac905bb91..986440ceab56 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
@@ -78,66 +78,66 @@ additionalProperties: false
examples:
- |
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/leds/common.h>
-
- i2c {
- #address-cells = <1>;
- #size-cells = <0>;
-
- led-controller@14 {
- compatible = "ti,lp5009";
- reg = <0x14>;
- #address-cells = <1>;
- #size-cells = <0>;
- enable-gpios = <&gpio1 16>;
-
- multi-led@1 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x1>;
- color = <LED_COLOR_ID_RGB>;
- function = LED_FUNCTION_CHARGING;
-
- led@0 {
- reg = <0x0>;
- color = <LED_COLOR_ID_RED>;
- };
-
- led@1 {
- reg = <0x1>;
- color = <LED_COLOR_ID_GREEN>;
- };
-
- led@2 {
- reg = <0x2>;
- color = <LED_COLOR_ID_BLUE>;
- };
- };
-
- multi-led@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x3>, <0x4>, <0x5>;
- color = <LED_COLOR_ID_RGB>;
- function = LED_FUNCTION_STANDBY;
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/leds/common.h>
- led@3 {
- reg = <0x3>;
- color = <LED_COLOR_ID_RED>;
- };
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
- led@4 {
- reg = <0x4>;
- color = <LED_COLOR_ID_GREEN>;
+ led-controller@14 {
+ compatible = "ti,lp5009";
+ reg = <0x14>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-gpios = <&gpio1 16>;
+
+ multi-led@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_CHARGING;
+
+ led@0 {
+ reg = <0x0>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <0x1>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@2 {
+ reg = <0x2>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
};
- led@5 {
- reg = <0x5>;
- color = <LED_COLOR_ID_BLUE>;
+ multi-led@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>, <0x4>, <0x5>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_STANDBY;
+
+ led@3 {
+ reg = <0x3>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@4 {
+ reg = <0x4>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@5 {
+ reg = <0x5>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
};
- };
- };
+ };
};
...
diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
index f552cd143d5b..7ec676e53851 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
@@ -108,119 +108,119 @@ additionalProperties: false
examples:
- |
- #include <dt-bindings/leds/common.h>
-
- i2c {
- #address-cells = <1>;
- #size-cells = <0>;
-
- led-controller@32 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "ti,lp8501";
- reg = <0x32>;
- clock-mode = /bits/ 8 <2>;
- pwr-sel = /bits/ 8 <3>; /* D1~9 connected to VOUT */
-
- led@0 {
- reg = <0>;
- chan-name = "d1";
- led-cur = /bits/ 8 <0x14>;
- max-cur = /bits/ 8 <0x20>;
- };
-
- led@1 {
- reg = <1>;
- chan-name = "d2";
- led-cur = /bits/ 8 <0x14>;
- max-cur = /bits/ 8 <0x20>;
- };
-
- led@2 {
- reg = <2>;
- chan-name = "d3";
- led-cur = /bits/ 8 <0x14>;
- max-cur = /bits/ 8 <0x20>;
- };
-
- led@3 {
- reg = <3>;
- chan-name = "d4";
- led-cur = /bits/ 8 <0x14>;
- max-cur = /bits/ 8 <0x20>;
- };
-
- led@4 {
- reg = <4>;
- chan-name = "d5";
- led-cur = /bits/ 8 <0x14>;
- max-cur = /bits/ 8 <0x20>;
- };
-
- led@5 {
- reg = <5>;
- chan-name = "d6";
- led-cur = /bits/ 8 <0x14>;
- max-cur = /bits/ 8 <0x20>;
- };
-
- led@6 {
- reg = <6>;
- chan-name = "d7";
- led-cur = /bits/ 8 <0x14>;
- max-cur = /bits/ 8 <0x20>;
- };
-
- led@7 {
- reg = <7>;
- chan-name = "d8";
- led-cur = /bits/ 8 <0x14>;
- max-cur = /bits/ 8 <0x20>;
- };
-
- led@8 {
- reg = <8>;
- chan-name = "d9";
- led-cur = /bits/ 8 <0x14>;
- max-cur = /bits/ 8 <0x20>;
- };
+ #include <dt-bindings/leds/common.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led-controller@32 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "ti,lp8501";
+ reg = <0x32>;
+ clock-mode = /bits/ 8 <2>;
+ pwr-sel = /bits/ 8 <3>; /* D1~9 connected to VOUT */
+
+ led@0 {
+ reg = <0>;
+ chan-name = "d1";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ led@1 {
+ reg = <1>;
+ chan-name = "d2";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ led@2 {
+ reg = <2>;
+ chan-name = "d3";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ led@3 {
+ reg = <3>;
+ chan-name = "d4";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ led@4 {
+ reg = <4>;
+ chan-name = "d5";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ led@5 {
+ reg = <5>;
+ chan-name = "d6";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ led@6 {
+ reg = <6>;
+ chan-name = "d7";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ led@7 {
+ reg = <7>;
+ chan-name = "d8";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ led@8 {
+ reg = <8>;
+ chan-name = "d9";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
};
- led-controller@33 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "national,lp5523";
- reg = <0x33>;
- clock-mode = /bits/ 8 <0>;
-
- multi-led@2 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x2>;
- color = <LED_COLOR_ID_RGB>;
- function = LED_FUNCTION_STANDBY;
- linux,default-trigger = "heartbeat";
-
- led@0 {
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- reg = <0x0>;
- color = <LED_COLOR_ID_GREEN>;
- };
-
- led@1 {
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- reg = <0x1>;
- color = <LED_COLOR_ID_BLUE>;
- };
-
- led@6 {
- led-cur = /bits/ 8 <50>;
- max-cur = /bits/ 8 <100>;
- reg = <0x6>;
- color = <LED_COLOR_ID_RED>;
- };
+ led-controller@33 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "national,lp5523";
+ reg = <0x33>;
+ clock-mode = /bits/ 8 <0>;
+
+ multi-led@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_STANDBY;
+ linux,default-trigger = "heartbeat";
+
+ led@0 {
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ reg = <0x0>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@1 {
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ reg = <0x1>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@6 {
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ reg = <0x6>;
+ color = <LED_COLOR_ID_RED>;
+ };
};
};
};
diff --git a/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
index 6625a528f727..fdaf04e03a8d 100644
--- a/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
@@ -55,24 +55,24 @@ examples:
compatible = "pwm-leds-multicolor";
multi-led {
- color = <LED_COLOR_ID_RGB>;
- function = LED_FUNCTION_INDICATOR;
- max-brightness = <65535>;
-
- led-red {
- pwms = <&pwm1 0 1000000>;
- color = <LED_COLOR_ID_RED>;
- };
-
- led-green {
- pwms = <&pwm2 0 1000000>;
- color = <LED_COLOR_ID_GREEN>;
- };
-
- led-blue {
- pwms = <&pwm3 0 1000000>;
- color = <LED_COLOR_ID_BLUE>;
- };
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_INDICATOR;
+ max-brightness = <65535>;
+
+ led-red {
+ pwms = <&pwm1 0 1000000>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led-green {
+ pwms = <&pwm2 0 1000000>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led-blue {
+ pwms = <&pwm3 0 1000000>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
};
};
--
2.32.0
next prev parent reply other threads:[~2022-05-18 8:22 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-18 8:22 [PATCH 1/2] dt-bindings: leds: lp50xx: correct reg/unit addresses in example Krzysztof Kozlowski
2022-05-18 8:22 ` Krzysztof Kozlowski [this message]
2022-05-23 21:35 ` Rob Herring
2022-05-24 6:36 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220518082215.14358-2-krzysztof.kozlowski@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dmurphy@ti.com \
--cc=jacek.anaszewski@gmail.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kyle.swenson@est.tech \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=robh+dt@kernel.org \
--cc=sven.schwermer@disruptive-technologies.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.