* [v1 0/3] Add dtsi for sc7280 boards that using rt5682 codec
@ 2022-05-19 8:41 ` Judy Hsiao
0 siblings, 0 replies; 18+ messages in thread
From: Judy Hsiao @ 2022-05-19 8:41 UTC (permalink / raw)
To: Andy Gross
Cc: Bjorn Andersson, Rob Herring, Srini Kandagatla, dianders, mka,
cychiang, judyhsiao, tzungbi, swboyd, linux-arm-kernel,
linux-arm-msm, devicetree, linux-kernel, Judy Hsiao
Put sound node and lpass_cpu node settings for boards that use rt5682
codec in the sc7280-herobrine-audio-rt5682.dtsi as there are different
choices of headset codec for herobrine projects. Common audio setting
for the internal speaker is in sc7280-herobrine.dtsi.
Judy Hsiao (3):
arm64: dts: qcom: sc7280: Add drive strength property for secondary
MI2S
arm64: dts: qcom: sc7280: Add sc7280-herobrine-audio-rt5682.dtsi
arm64: dts: qcom: sc7280: include sc7280-herobrine-audio-rt5682.dtsi
in villager and herobrine-r1
.../qcom/sc7280-herobrine-audio-rt5682.dtsi | 121 ++++++++++++++++++
.../qcom/sc7280-herobrine-herobrine-r1.dts | 1 +
.../dts/qcom/sc7280-herobrine-villager-r0.dts | 1 +
.../arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 14 ++
4 files changed, 137 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi
--
2.36.1.124.g0e6072fb45-goog
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 18+ messages in thread* [v1 1/3] arm64: dts: qcom: sc7280: Add drive strength property for secondary MI2S
2022-05-19 8:41 ` Judy Hsiao
@ 2022-05-19 8:41 ` Judy Hsiao
-1 siblings, 0 replies; 18+ messages in thread
From: Judy Hsiao @ 2022-05-19 8:41 UTC (permalink / raw)
To: Andy Gross
Cc: Bjorn Andersson, Rob Herring, Srini Kandagatla, dianders, mka,
cychiang, judyhsiao, tzungbi, swboyd, linux-arm-kernel,
linux-arm-msm, devicetree, linux-kernel, Judy Hsiao
Add drive strength property for secondary MI2S on sc7280 based platforms
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
---
arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index 9cb1bc8ed6b5..6d8744e130b0 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -612,6 +612,20 @@ &dp_hot_plug_det {
bias-disable;
};
+&mi2s1_data0 {
+ drive-strength = <6>;
+ bias-disable;
+};
+
+&mi2s1_sclk {
+ drive-strength = <6>;
+ bias-disable;
+};
+
+&mi2s1_ws {
+ drive-strength = <6>;
+};
+
&pcie1_clkreq_n {
bias-pull-up;
drive-strength = <2>;
--
2.36.1.124.g0e6072fb45-goog
^ permalink raw reply related [flat|nested] 18+ messages in thread* [v1 1/3] arm64: dts: qcom: sc7280: Add drive strength property for secondary MI2S
@ 2022-05-19 8:41 ` Judy Hsiao
0 siblings, 0 replies; 18+ messages in thread
From: Judy Hsiao @ 2022-05-19 8:41 UTC (permalink / raw)
To: Andy Gross
Cc: Bjorn Andersson, Rob Herring, Srini Kandagatla, dianders, mka,
cychiang, judyhsiao, tzungbi, swboyd, linux-arm-kernel,
linux-arm-msm, devicetree, linux-kernel, Judy Hsiao
Add drive strength property for secondary MI2S on sc7280 based platforms
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
---
arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index 9cb1bc8ed6b5..6d8744e130b0 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -612,6 +612,20 @@ &dp_hot_plug_det {
bias-disable;
};
+&mi2s1_data0 {
+ drive-strength = <6>;
+ bias-disable;
+};
+
+&mi2s1_sclk {
+ drive-strength = <6>;
+ bias-disable;
+};
+
+&mi2s1_ws {
+ drive-strength = <6>;
+};
+
&pcie1_clkreq_n {
bias-pull-up;
drive-strength = <2>;
--
2.36.1.124.g0e6072fb45-goog
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 18+ messages in thread* Re: [v1 1/3] arm64: dts: qcom: sc7280: Add drive strength property for secondary MI2S
2022-05-19 8:41 ` Judy Hsiao
@ 2022-05-19 15:24 ` Matthias Kaehlcke
-1 siblings, 0 replies; 18+ messages in thread
From: Matthias Kaehlcke @ 2022-05-19 15:24 UTC (permalink / raw)
To: Judy Hsiao
Cc: Andy Gross, Bjorn Andersson, Rob Herring, Srini Kandagatla,
dianders, cychiang, judyhsiao, tzungbi, swboyd, linux-arm-kernel,
linux-arm-msm, devicetree, linux-kernel
On Thu, May 19, 2022 at 08:41:17AM +0000, Judy Hsiao wrote:
> Subject: arm64: dts: qcom: sc7280: Add drive strength property for secondary MI2S
>
> Add drive strength property for secondary MI2S on sc7280 based platforms
That's not an accurate description, this patch only adjust settings for
herobrine based boards. This should be reflected at list in the subject.
Besides setting the drive strengths this patch also disables the pulls
on some lines, so maybe better say something like "arm64: dts: qcom:
sc7280: herobrine: Add pinconf settings for mi2s1".
> Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
> ---
> arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
> index 9cb1bc8ed6b5..6d8744e130b0 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
> @@ -612,6 +612,20 @@ &dp_hot_plug_det {
> bias-disable;
> };
>
> +&mi2s1_data0 {
> + drive-strength = <6>;
> + bias-disable;
> +};
> +
> +&mi2s1_sclk {
> + drive-strength = <6>;
> + bias-disable;
> +};
> +
> +&mi2s1_ws {
> + drive-strength = <6>;
> +};
> +
> &pcie1_clkreq_n {
> bias-pull-up;
> drive-strength = <2>;
> --
> 2.36.1.124.g0e6072fb45-goog
>
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [v1 1/3] arm64: dts: qcom: sc7280: Add drive strength property for secondary MI2S
@ 2022-05-19 15:24 ` Matthias Kaehlcke
0 siblings, 0 replies; 18+ messages in thread
From: Matthias Kaehlcke @ 2022-05-19 15:24 UTC (permalink / raw)
To: Judy Hsiao
Cc: Andy Gross, Bjorn Andersson, Rob Herring, Srini Kandagatla,
dianders, cychiang, judyhsiao, tzungbi, swboyd, linux-arm-kernel,
linux-arm-msm, devicetree, linux-kernel
On Thu, May 19, 2022 at 08:41:17AM +0000, Judy Hsiao wrote:
> Subject: arm64: dts: qcom: sc7280: Add drive strength property for secondary MI2S
>
> Add drive strength property for secondary MI2S on sc7280 based platforms
That's not an accurate description, this patch only adjust settings for
herobrine based boards. This should be reflected at list in the subject.
Besides setting the drive strengths this patch also disables the pulls
on some lines, so maybe better say something like "arm64: dts: qcom:
sc7280: herobrine: Add pinconf settings for mi2s1".
> Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
> ---
> arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
> index 9cb1bc8ed6b5..6d8744e130b0 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
> @@ -612,6 +612,20 @@ &dp_hot_plug_det {
> bias-disable;
> };
>
> +&mi2s1_data0 {
> + drive-strength = <6>;
> + bias-disable;
> +};
> +
> +&mi2s1_sclk {
> + drive-strength = <6>;
> + bias-disable;
> +};
> +
> +&mi2s1_ws {
> + drive-strength = <6>;
> +};
> +
> &pcie1_clkreq_n {
> bias-pull-up;
> drive-strength = <2>;
> --
> 2.36.1.124.g0e6072fb45-goog
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [v1 1/3] arm64: dts: qcom: sc7280: Add drive strength property for secondary MI2S
2022-05-19 8:41 ` Judy Hsiao
@ 2022-05-20 2:53 ` kernel test robot
-1 siblings, 0 replies; 18+ messages in thread
From: kernel test robot @ 2022-05-20 2:53 UTC (permalink / raw)
To: Judy Hsiao, Andy Gross
Cc: kbuild-all, Bjorn Andersson, Rob Herring, Srini Kandagatla,
dianders, mka, cychiang, judyhsiao, tzungbi, swboyd,
linux-arm-kernel, linux-arm-msm, devicetree, linux-kernel,
Judy Hsiao
Hi Judy,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on soc/for-next]
[also build test ERROR on v5.18-rc7]
[cannot apply to robh/for-next arm/for-next arm64/for-next/core clk/clk-next kvmarm/next rockchip/for-next shawnguo/for-next keystone/next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/intel-lab-lkp/linux/commits/Judy-Hsiao/Add-dtsi-for-sc7280-boards-that-using-rt5682-codec/20220519-164227
base: https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git for-next
config: arm64-allyesconfig (https://download.01.org/0day-ci/archive/20220520/202205201035.VNGXOfUp-lkp@intel.com/config)
compiler: aarch64-linux-gcc (GCC) 11.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/b59ef0e3880c11efecbe61bebfe9352c76bf96f4
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Judy-Hsiao/Add-dtsi-for-sc7280-boards-that-using-rt5682-codec/20220519-164227
git checkout b59ef0e3880c11efecbe61bebfe9352c76bf96f4
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.3.0 make.cross W=1 O=build_dir ARCH=arm64 SHELL=/bin/bash
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
>> Error: arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi:615.1-13 Label or path mi2s1_data0 not found
>> Error: arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi:620.1-12 Label or path mi2s1_sclk not found
>> Error: arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi:625.1-10 Label or path mi2s1_ws not found
FATAL ERROR: Syntax error parsing input tree
--
0-DAY CI Kernel Test Service
https://01.org/lkp
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [v1 1/3] arm64: dts: qcom: sc7280: Add drive strength property for secondary MI2S
@ 2022-05-20 2:53 ` kernel test robot
0 siblings, 0 replies; 18+ messages in thread
From: kernel test robot @ 2022-05-20 2:53 UTC (permalink / raw)
To: Judy Hsiao, Andy Gross
Cc: kbuild-all, Bjorn Andersson, Rob Herring, Srini Kandagatla,
dianders, mka, cychiang, judyhsiao, tzungbi, swboyd,
linux-arm-kernel, linux-arm-msm, devicetree, linux-kernel,
Judy Hsiao
Hi Judy,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on soc/for-next]
[also build test ERROR on v5.18-rc7]
[cannot apply to robh/for-next arm/for-next arm64/for-next/core clk/clk-next kvmarm/next rockchip/for-next shawnguo/for-next keystone/next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/intel-lab-lkp/linux/commits/Judy-Hsiao/Add-dtsi-for-sc7280-boards-that-using-rt5682-codec/20220519-164227
base: https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git for-next
config: arm64-allyesconfig (https://download.01.org/0day-ci/archive/20220520/202205201035.VNGXOfUp-lkp@intel.com/config)
compiler: aarch64-linux-gcc (GCC) 11.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/b59ef0e3880c11efecbe61bebfe9352c76bf96f4
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Judy-Hsiao/Add-dtsi-for-sc7280-boards-that-using-rt5682-codec/20220519-164227
git checkout b59ef0e3880c11efecbe61bebfe9352c76bf96f4
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.3.0 make.cross W=1 O=build_dir ARCH=arm64 SHELL=/bin/bash
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
>> Error: arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi:615.1-13 Label or path mi2s1_data0 not found
>> Error: arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi:620.1-12 Label or path mi2s1_sclk not found
>> Error: arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi:625.1-10 Label or path mi2s1_ws not found
FATAL ERROR: Syntax error parsing input tree
--
0-DAY CI Kernel Test Service
https://01.org/lkp
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 18+ messages in thread
* [v1 2/3] arm64: dts: qcom: sc7280: Add sc7280-herobrine-audio-rt5682.dtsi
2022-05-19 8:41 ` Judy Hsiao
@ 2022-05-19 8:41 ` Judy Hsiao
-1 siblings, 0 replies; 18+ messages in thread
From: Judy Hsiao @ 2022-05-19 8:41 UTC (permalink / raw)
To: Andy Gross
Cc: Bjorn Andersson, Rob Herring, Srini Kandagatla, dianders, mka,
cychiang, judyhsiao, tzungbi, swboyd, linux-arm-kernel,
linux-arm-msm, devicetree, linux-kernel, Judy Hsiao
Audio dtsi for sc7280 boards that using rt5682 headset codec:
1. Add dt nodes for sound card which use I2S playback and record
through rt5682s and I2S playback through max98357a.
2. Enable lpass cpu node and add pin control and dai-links.
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
---
.../qcom/sc7280-herobrine-audio-rt5682.dtsi | 121 ++++++++++++++++++
1 file changed, 121 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi
new file mode 100644
index 000000000000..9e449817f6fd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ *
+ * This file defines the common audio settings for the child boards using rt5682 codec.
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/ {
+ /* BOARD-SPECIFIC TOP LEVEL NODES */
+ sound: sound {
+ compatible = "google,sc7280-herobrine";
+ model = "sc7280-rt5682-max98360a-1mic";
+
+ status = "okay";
+ audio-routing =
+ "Headphone Jack", "HPOL",
+ "Headphone Jack", "HPOR";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <0>;
+
+ dai-link@0 {
+ link-name = "MAX98360";
+ reg = <0>;
+
+ cpu {
+ sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+ };
+
+ codec {
+ sound-dai = <&max98360a>;
+ };
+ };
+
+ dai-link@1 {
+ link-name = "ALC5682";
+ reg = <1>;
+
+ cpu {
+ sound-dai = <&lpass_cpu MI2S_PRIMARY>;
+ };
+
+ codec {
+ sound-dai = <&alc5682 0 /* aif1 */>;
+ };
+ };
+ };
+};
+
+hp_i2c: &i2c2 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ alc5682: codec@1a {
+ compatible = "realtek,rt5682s";
+ reg = <0x1a>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hp_irq>;
+
+ #sound-dai-cells = <1>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <101 IRQ_TYPE_EDGE_BOTH>;
+
+ AVDD-supply = <&pp1800_alc5682>;
+ MICVDD-supply = <&pp3300_codec>;
+
+ realtek,dmic1-data-pin = <1>;
+ realtek,dmic1-clk-pin = <2>;
+ realtek,jd-src = <1>;
+ realtek,dmic-clk-rate-hz = <2048000>;
+ };
+};
+
+&lpass_cpu {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mi2s0_data0 &mi2s0_data1 &mi2s0_mclk &mi2s0_sclk &mi2s0_ws
+ &mi2s1_data0 &mi2s1_sclk &mi2s1_ws>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dai-link@0 {
+ reg = <MI2S_PRIMARY>;
+ qcom,playback-sd-lines = <1>;
+ qcom,capture-sd-lines = <0>;
+ };
+
+ dai-link@1 {
+ reg = <MI2S_SECONDARY>;
+ qcom,playback-sd-lines = <0>;
+ };
+};
+
+&mi2s0_data0 {
+ drive-strength = <6>;
+ bias-disable;
+};
+
+&mi2s0_data1 {
+ drive-strength = <6>;
+ bias-disable;
+};
+
+&mi2s0_mclk {
+ drive-strength = <6>;
+ bias-disable;
+};
+
+&mi2s0_sclk {
+ drive-strength = <6>;
+ bias-disable;
+};
+
+&mi2s0_ws {
+ drive-strength = <6>;
+};
--
2.36.1.124.g0e6072fb45-goog
^ permalink raw reply related [flat|nested] 18+ messages in thread* [v1 2/3] arm64: dts: qcom: sc7280: Add sc7280-herobrine-audio-rt5682.dtsi
@ 2022-05-19 8:41 ` Judy Hsiao
0 siblings, 0 replies; 18+ messages in thread
From: Judy Hsiao @ 2022-05-19 8:41 UTC (permalink / raw)
To: Andy Gross
Cc: Bjorn Andersson, Rob Herring, Srini Kandagatla, dianders, mka,
cychiang, judyhsiao, tzungbi, swboyd, linux-arm-kernel,
linux-arm-msm, devicetree, linux-kernel, Judy Hsiao
Audio dtsi for sc7280 boards that using rt5682 headset codec:
1. Add dt nodes for sound card which use I2S playback and record
through rt5682s and I2S playback through max98357a.
2. Enable lpass cpu node and add pin control and dai-links.
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
---
.../qcom/sc7280-herobrine-audio-rt5682.dtsi | 121 ++++++++++++++++++
1 file changed, 121 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi
new file mode 100644
index 000000000000..9e449817f6fd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ *
+ * This file defines the common audio settings for the child boards using rt5682 codec.
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/ {
+ /* BOARD-SPECIFIC TOP LEVEL NODES */
+ sound: sound {
+ compatible = "google,sc7280-herobrine";
+ model = "sc7280-rt5682-max98360a-1mic";
+
+ status = "okay";
+ audio-routing =
+ "Headphone Jack", "HPOL",
+ "Headphone Jack", "HPOR";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <0>;
+
+ dai-link@0 {
+ link-name = "MAX98360";
+ reg = <0>;
+
+ cpu {
+ sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+ };
+
+ codec {
+ sound-dai = <&max98360a>;
+ };
+ };
+
+ dai-link@1 {
+ link-name = "ALC5682";
+ reg = <1>;
+
+ cpu {
+ sound-dai = <&lpass_cpu MI2S_PRIMARY>;
+ };
+
+ codec {
+ sound-dai = <&alc5682 0 /* aif1 */>;
+ };
+ };
+ };
+};
+
+hp_i2c: &i2c2 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ alc5682: codec@1a {
+ compatible = "realtek,rt5682s";
+ reg = <0x1a>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hp_irq>;
+
+ #sound-dai-cells = <1>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <101 IRQ_TYPE_EDGE_BOTH>;
+
+ AVDD-supply = <&pp1800_alc5682>;
+ MICVDD-supply = <&pp3300_codec>;
+
+ realtek,dmic1-data-pin = <1>;
+ realtek,dmic1-clk-pin = <2>;
+ realtek,jd-src = <1>;
+ realtek,dmic-clk-rate-hz = <2048000>;
+ };
+};
+
+&lpass_cpu {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mi2s0_data0 &mi2s0_data1 &mi2s0_mclk &mi2s0_sclk &mi2s0_ws
+ &mi2s1_data0 &mi2s1_sclk &mi2s1_ws>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dai-link@0 {
+ reg = <MI2S_PRIMARY>;
+ qcom,playback-sd-lines = <1>;
+ qcom,capture-sd-lines = <0>;
+ };
+
+ dai-link@1 {
+ reg = <MI2S_SECONDARY>;
+ qcom,playback-sd-lines = <0>;
+ };
+};
+
+&mi2s0_data0 {
+ drive-strength = <6>;
+ bias-disable;
+};
+
+&mi2s0_data1 {
+ drive-strength = <6>;
+ bias-disable;
+};
+
+&mi2s0_mclk {
+ drive-strength = <6>;
+ bias-disable;
+};
+
+&mi2s0_sclk {
+ drive-strength = <6>;
+ bias-disable;
+};
+
+&mi2s0_ws {
+ drive-strength = <6>;
+};
--
2.36.1.124.g0e6072fb45-goog
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 18+ messages in thread* Re: [v1 2/3] arm64: dts: qcom: sc7280: Add sc7280-herobrine-audio-rt5682.dtsi
2022-05-19 8:41 ` Judy Hsiao
@ 2022-05-19 16:04 ` Matthias Kaehlcke
-1 siblings, 0 replies; 18+ messages in thread
From: Matthias Kaehlcke @ 2022-05-19 16:04 UTC (permalink / raw)
To: Judy Hsiao
Cc: Andy Gross, Bjorn Andersson, Rob Herring, Srini Kandagatla,
dianders, cychiang, judyhsiao, tzungbi, swboyd, linux-arm-kernel,
linux-arm-msm, devicetree, linux-kernel
On Thu, May 19, 2022 at 08:41:18AM +0000, Judy Hsiao wrote:
> Audio dtsi for sc7280 boards that using rt5682 headset codec:
> 1. Add dt nodes for sound card which use I2S playback and record
> through rt5682s and I2S playback through max98357a.
> 2. Enable lpass cpu node and add pin control and dai-links.
>
> Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
A general note: this series depends on others like "Add lpass pin
control support for audio on sc7280 based targets" [1] and "Add
soundcard support for sc7280 based platforms" [2]. This should be
mentioned somewhere, either in the cover letter or after '---'.
[1] https://patchwork.kernel.org/project/linux-arm-msm/list/?series=638776
[2] https://patchwork.kernel.org/project/linux-arm-msm/list/?series=638274
> ---
> .../qcom/sc7280-herobrine-audio-rt5682.dtsi | 121 ++++++++++++++++++
> 1 file changed, 121 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi
> new file mode 100644
> index 000000000000..9e449817f6fd
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi
> @@ -0,0 +1,121 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + *
> + * This file defines the common audio settings for the child boards using rt5682 codec.
> + *
> + * Copyright 2022 Google LLC.
> + */
> +
> +/ {
> + /* BOARD-SPECIFIC TOP LEVEL NODES */
> + sound: sound {
> + compatible = "google,sc7280-herobrine";
> + model = "sc7280-rt5682-max98360a-1mic";
> +
> + status = "okay";
> + audio-routing =
> + "Headphone Jack", "HPOL",
> + "Headphone Jack", "HPOR";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #sound-dai-cells = <0>;
Is 'sound-dai-cells' really needed here? The binding doesn't mention it and
the sound card isn't really a DAI.
> +
> + dai-link@0 {
> + link-name = "MAX98360";
> + reg = <0>;
Eventually the 'reg' property should be removed from the binding and DTs
([1], [2]), but for now it is needed to match the binding.
[1] https://patchwork.kernel.org/project/linux-arm-msm/patch/1649863277-31615-5-git-send-email-quic_srivasam@quicinc.com/
[2] https://patchwork.kernel.org/project/linux-arm-msm/patch/1650291252-30398-5-git-send-email-quic_srivasam@quicinc.com/
> +
> + cpu {
> + sound-dai = <&lpass_cpu MI2S_SECONDARY>;
> + };
> +
> + codec {
> + sound-dai = <&max98360a>;
> + };
> + };
> +
> + dai-link@1 {
> + link-name = "ALC5682";
> + reg = <1>;
> +
> + cpu {
> + sound-dai = <&lpass_cpu MI2S_PRIMARY>;
> + };
> +
> + codec {
> + sound-dai = <&alc5682 0 /* aif1 */>;
> + };
> + };
> + };
> +};
> +
> +hp_i2c: &i2c2 {
> + status = "okay";
> + clock-frequency = <400000>;
> +
> + alc5682: codec@1a {
> + compatible = "realtek,rt5682s";
> + reg = <0x1a>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hp_irq>;
> +
> + #sound-dai-cells = <1>;
> +
> + interrupt-parent = <&tlmm>;
> + interrupts = <101 IRQ_TYPE_EDGE_BOTH>;
> +
> + AVDD-supply = <&pp1800_alc5682>;
> + MICVDD-supply = <&pp3300_codec>;
The regulators are not mentioned in the binding, but the driver
expects them, so I guess this is fine (maybe the binding should
be updated in a separate patch?).
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [v1 2/3] arm64: dts: qcom: sc7280: Add sc7280-herobrine-audio-rt5682.dtsi
@ 2022-05-19 16:04 ` Matthias Kaehlcke
0 siblings, 0 replies; 18+ messages in thread
From: Matthias Kaehlcke @ 2022-05-19 16:04 UTC (permalink / raw)
To: Judy Hsiao
Cc: Andy Gross, Bjorn Andersson, Rob Herring, Srini Kandagatla,
dianders, cychiang, judyhsiao, tzungbi, swboyd, linux-arm-kernel,
linux-arm-msm, devicetree, linux-kernel
On Thu, May 19, 2022 at 08:41:18AM +0000, Judy Hsiao wrote:
> Audio dtsi for sc7280 boards that using rt5682 headset codec:
> 1. Add dt nodes for sound card which use I2S playback and record
> through rt5682s and I2S playback through max98357a.
> 2. Enable lpass cpu node and add pin control and dai-links.
>
> Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
A general note: this series depends on others like "Add lpass pin
control support for audio on sc7280 based targets" [1] and "Add
soundcard support for sc7280 based platforms" [2]. This should be
mentioned somewhere, either in the cover letter or after '---'.
[1] https://patchwork.kernel.org/project/linux-arm-msm/list/?series=638776
[2] https://patchwork.kernel.org/project/linux-arm-msm/list/?series=638274
> ---
> .../qcom/sc7280-herobrine-audio-rt5682.dtsi | 121 ++++++++++++++++++
> 1 file changed, 121 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi
> new file mode 100644
> index 000000000000..9e449817f6fd
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi
> @@ -0,0 +1,121 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + *
> + * This file defines the common audio settings for the child boards using rt5682 codec.
> + *
> + * Copyright 2022 Google LLC.
> + */
> +
> +/ {
> + /* BOARD-SPECIFIC TOP LEVEL NODES */
> + sound: sound {
> + compatible = "google,sc7280-herobrine";
> + model = "sc7280-rt5682-max98360a-1mic";
> +
> + status = "okay";
> + audio-routing =
> + "Headphone Jack", "HPOL",
> + "Headphone Jack", "HPOR";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #sound-dai-cells = <0>;
Is 'sound-dai-cells' really needed here? The binding doesn't mention it and
the sound card isn't really a DAI.
> +
> + dai-link@0 {
> + link-name = "MAX98360";
> + reg = <0>;
Eventually the 'reg' property should be removed from the binding and DTs
([1], [2]), but for now it is needed to match the binding.
[1] https://patchwork.kernel.org/project/linux-arm-msm/patch/1649863277-31615-5-git-send-email-quic_srivasam@quicinc.com/
[2] https://patchwork.kernel.org/project/linux-arm-msm/patch/1650291252-30398-5-git-send-email-quic_srivasam@quicinc.com/
> +
> + cpu {
> + sound-dai = <&lpass_cpu MI2S_SECONDARY>;
> + };
> +
> + codec {
> + sound-dai = <&max98360a>;
> + };
> + };
> +
> + dai-link@1 {
> + link-name = "ALC5682";
> + reg = <1>;
> +
> + cpu {
> + sound-dai = <&lpass_cpu MI2S_PRIMARY>;
> + };
> +
> + codec {
> + sound-dai = <&alc5682 0 /* aif1 */>;
> + };
> + };
> + };
> +};
> +
> +hp_i2c: &i2c2 {
> + status = "okay";
> + clock-frequency = <400000>;
> +
> + alc5682: codec@1a {
> + compatible = "realtek,rt5682s";
> + reg = <0x1a>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&hp_irq>;
> +
> + #sound-dai-cells = <1>;
> +
> + interrupt-parent = <&tlmm>;
> + interrupts = <101 IRQ_TYPE_EDGE_BOTH>;
> +
> + AVDD-supply = <&pp1800_alc5682>;
> + MICVDD-supply = <&pp3300_codec>;
The regulators are not mentioned in the binding, but the driver
expects them, so I guess this is fine (maybe the binding should
be updated in a separate patch?).
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 18+ messages in thread
* [v1 3/3] arm64: dts: qcom: sc7280: include sc7280-herobrine-audio-rt5682.dtsi in villager and herobrine-r1
2022-05-19 8:41 ` Judy Hsiao
@ 2022-05-19 8:41 ` Judy Hsiao
-1 siblings, 0 replies; 18+ messages in thread
From: Judy Hsiao @ 2022-05-19 8:41 UTC (permalink / raw)
To: Andy Gross
Cc: Bjorn Andersson, Rob Herring, Srini Kandagatla, dianders, mka,
cychiang, judyhsiao, tzungbi, swboyd, linux-arm-kernel,
linux-arm-msm, devicetree, linux-kernel, Judy Hsiao
Include sc7280-herobrine-audio-rt5682.dtsi in villager and herobrine-r1 as
these boards use rt5682 codec.
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
---
arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts | 1 +
arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts | 1 +
2 files changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
index b69ca09d9bfb..f68d28f8701b 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
@@ -8,6 +8,7 @@
/dts-v1/;
#include "sc7280-herobrine.dtsi"
+#include "sc7280-herobrine-audio-rt5682.dtsi"
/ {
model = "Google Herobrine (rev1+)";
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts
index d3d6ffad4eff..7a4acd3b9ee3 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts
@@ -8,6 +8,7 @@
/dts-v1/;
#include "sc7280-herobrine.dtsi"
+#include "sc7280-herobrine-audio-rt5682.dtsi"
/ {
model = "Google Villager (rev0+)";
--
2.36.1.124.g0e6072fb45-goog
^ permalink raw reply related [flat|nested] 18+ messages in thread* [v1 3/3] arm64: dts: qcom: sc7280: include sc7280-herobrine-audio-rt5682.dtsi in villager and herobrine-r1
@ 2022-05-19 8:41 ` Judy Hsiao
0 siblings, 0 replies; 18+ messages in thread
From: Judy Hsiao @ 2022-05-19 8:41 UTC (permalink / raw)
To: Andy Gross
Cc: Bjorn Andersson, Rob Herring, Srini Kandagatla, dianders, mka,
cychiang, judyhsiao, tzungbi, swboyd, linux-arm-kernel,
linux-arm-msm, devicetree, linux-kernel, Judy Hsiao
Include sc7280-herobrine-audio-rt5682.dtsi in villager and herobrine-r1 as
these boards use rt5682 codec.
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
---
arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts | 1 +
arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts | 1 +
2 files changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
index b69ca09d9bfb..f68d28f8701b 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
@@ -8,6 +8,7 @@
/dts-v1/;
#include "sc7280-herobrine.dtsi"
+#include "sc7280-herobrine-audio-rt5682.dtsi"
/ {
model = "Google Herobrine (rev1+)";
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts
index d3d6ffad4eff..7a4acd3b9ee3 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-villager-r0.dts
@@ -8,6 +8,7 @@
/dts-v1/;
#include "sc7280-herobrine.dtsi"
+#include "sc7280-herobrine-audio-rt5682.dtsi"
/ {
model = "Google Villager (rev0+)";
--
2.36.1.124.g0e6072fb45-goog
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 18+ messages in thread* Re: [v1 3/3] arm64: dts: qcom: sc7280: include sc7280-herobrine-audio-rt5682.dtsi in villager and herobrine-r1
2022-05-19 8:41 ` Judy Hsiao
@ 2022-05-19 16:07 ` Matthias Kaehlcke
-1 siblings, 0 replies; 18+ messages in thread
From: Matthias Kaehlcke @ 2022-05-19 16:07 UTC (permalink / raw)
To: Judy Hsiao
Cc: Andy Gross, Bjorn Andersson, Rob Herring, Srini Kandagatla,
dianders, cychiang, judyhsiao, tzungbi, swboyd, linux-arm-kernel,
linux-arm-msm, devicetree, linux-kernel
On Thu, May 19, 2022 at 08:41:19AM +0000, Judy Hsiao wrote:
> Include sc7280-herobrine-audio-rt5682.dtsi in villager and herobrine-r1 as
> these boards use rt5682 codec.
>
> Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [v1 3/3] arm64: dts: qcom: sc7280: include sc7280-herobrine-audio-rt5682.dtsi in villager and herobrine-r1
@ 2022-05-19 16:07 ` Matthias Kaehlcke
0 siblings, 0 replies; 18+ messages in thread
From: Matthias Kaehlcke @ 2022-05-19 16:07 UTC (permalink / raw)
To: Judy Hsiao
Cc: Andy Gross, Bjorn Andersson, Rob Herring, Srini Kandagatla,
dianders, cychiang, judyhsiao, tzungbi, swboyd, linux-arm-kernel,
linux-arm-msm, devicetree, linux-kernel
On Thu, May 19, 2022 at 08:41:19AM +0000, Judy Hsiao wrote:
> Include sc7280-herobrine-audio-rt5682.dtsi in villager and herobrine-r1 as
> these boards use rt5682 codec.
>
> Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [v1 3/3] arm64: dts: qcom: sc7280: include sc7280-herobrine-audio-rt5682.dtsi in villager and herobrine-r1
2022-05-19 8:41 ` Judy Hsiao
@ 2022-05-23 1:18 ` kernel test robot
-1 siblings, 0 replies; 18+ messages in thread
From: kernel test robot @ 2022-05-23 1:18 UTC (permalink / raw)
To: Judy Hsiao, Andy Gross
Cc: kbuild-all, Bjorn Andersson, Rob Herring, Srini Kandagatla,
dianders, mka, cychiang, judyhsiao, tzungbi, swboyd,
linux-arm-kernel, linux-arm-msm, devicetree, linux-kernel,
Judy Hsiao
Hi Judy,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on soc/for-next]
[cannot apply to robh/for-next arm/for-next arm64/for-next/core clk/clk-next kvmarm/next rockchip/for-next shawnguo/for-next keystone/next v5.18]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/intel-lab-lkp/linux/commits/Judy-Hsiao/Add-dtsi-for-sc7280-boards-that-using-rt5682-codec/20220519-164227
base: https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git for-next
config: arm64-allyesconfig (https://download.01.org/0day-ci/archive/20220523/202205230902.SjYN7dSW-lkp@intel.com/config)
compiler: aarch64-linux-gcc (GCC) 11.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/7d7f6f8d1383ed458da5ba18090dd7ce30e1c96b
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Judy-Hsiao/Add-dtsi-for-sc7280-boards-that-using-rt5682-codec/20220519-164227
git checkout 7d7f6f8d1383ed458da5ba18090dd7ce30e1c96b
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.3.0 make.cross W=1 O=build_dir ARCH=arm64 SHELL=/bin/bash
If you fix the issue, kindly add following tag where applicable
Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
Error: arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi:615.1-13 Label or path mi2s1_data0 not found
Error: arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi:620.1-12 Label or path mi2s1_sclk not found
Error: arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi:625.1-10 Label or path mi2s1_ws not found
>> Error: arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi:29.29-30 syntax error
FATAL ERROR: Unable to parse input tree
--
0-DAY CI Kernel Test Service
https://01.org/lkp
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [v1 3/3] arm64: dts: qcom: sc7280: include sc7280-herobrine-audio-rt5682.dtsi in villager and herobrine-r1
@ 2022-05-23 1:18 ` kernel test robot
0 siblings, 0 replies; 18+ messages in thread
From: kernel test robot @ 2022-05-23 1:18 UTC (permalink / raw)
To: Judy Hsiao, Andy Gross
Cc: kbuild-all, Bjorn Andersson, Rob Herring, Srini Kandagatla,
dianders, mka, cychiang, judyhsiao, tzungbi, swboyd,
linux-arm-kernel, linux-arm-msm, devicetree, linux-kernel,
Judy Hsiao
Hi Judy,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on soc/for-next]
[cannot apply to robh/for-next arm/for-next arm64/for-next/core clk/clk-next kvmarm/next rockchip/for-next shawnguo/for-next keystone/next v5.18]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/intel-lab-lkp/linux/commits/Judy-Hsiao/Add-dtsi-for-sc7280-boards-that-using-rt5682-codec/20220519-164227
base: https://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git for-next
config: arm64-allyesconfig (https://download.01.org/0day-ci/archive/20220523/202205230902.SjYN7dSW-lkp@intel.com/config)
compiler: aarch64-linux-gcc (GCC) 11.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/7d7f6f8d1383ed458da5ba18090dd7ce30e1c96b
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review Judy-Hsiao/Add-dtsi-for-sc7280-boards-that-using-rt5682-codec/20220519-164227
git checkout 7d7f6f8d1383ed458da5ba18090dd7ce30e1c96b
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.3.0 make.cross W=1 O=build_dir ARCH=arm64 SHELL=/bin/bash
If you fix the issue, kindly add following tag where applicable
Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
Error: arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi:615.1-13 Label or path mi2s1_data0 not found
Error: arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi:620.1-12 Label or path mi2s1_sclk not found
Error: arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi:625.1-10 Label or path mi2s1_ws not found
>> Error: arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi:29.29-30 syntax error
FATAL ERROR: Unable to parse input tree
--
0-DAY CI Kernel Test Service
https://01.org/lkp
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 18+ messages in thread