* [PATCH V2 00/16] imx: imx8m: clean up wdog code
@ 2022-05-05 11:05 Peng Fan (OSS)
2022-05-05 11:05 ` [PATCH V2 01/16] imx: imx8mn_evk: enable pinctrl_wdog in SPL Peng Fan (OSS)
` (15 more replies)
0 siblings, 16 replies; 26+ messages in thread
From: Peng Fan (OSS) @ 2022-05-05 11:05 UTC (permalink / raw)
To: sbabic, festevam; +Cc: u-boot, Peng Fan
From: Peng Fan <peng.fan@nxp.com>
V2:
Drop patch 6 in V1
Update commit log
Add R-b/T-b tag
Enable pinctrl wdog to clean up board level code
imx_watchdog.c already has function of set_wdog_reset, so after watchdog
driver enabled, no need that.
Note: I only have NXP EVK board, so please help test if possible.
Based on: https://patchwork.ozlabs.org/project/uboot/cover/20220505074341.24086-1-peng.fan@oss.nxp.com/
Peng Fan (16):
imx: imx8mn_evk: enable pinctrl_wdog in SPL
imx: imx8mm_evk: enable pinctrl_wdog in SPL
imx: imx8mp_evk: enable pinctrl_wdog in SPL
imx: imx8mm_beacon: enable pinctrl_wdog in SPL
imx: imx8mm-cl-iot-gate: enable pinctrl_wdog in SPL
imx: engicam-imx8mm: drop unused macro
imx: imx8mm-mx8menlo: drop unneeded watchdog settings
imx: imx8mm/n/p-venice: enable pinctrl_wdog in SPL
imx: imx8mn-beacon: enable pinctrl_wdog in SPL
imx: imx8mn_smm_s2: clean up board watchdog code
imx: imx8mn_var_som: clean up board watchdog code
imx: imx8mp_rsb7320a1: enable wdog driver model in SPL
imx: imx8mn-kontron-n801x: enable pinctrl_wdog in SPL
imx: phycore_imx8mm/p: clean up board watchdog code
imx: verdin-imx8mm/p: cleanup board watchdog code
imx: toradex/verdin-imx8mm/p: cleanup board watchdog code
arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi | 4 +++
arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi | 4 +++
arch/arm/dts/imx8mm-evk-u-boot.dtsi | 4 +++
arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi | 4 +++
arch/arm/dts/imx8mm-venice-u-boot.dtsi | 4 +++
arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi | 4 +++
arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi | 4 +++
arch/arm/dts/imx8mn-venice-u-boot.dtsi | 4 +++
arch/arm/dts/imx8mp-evk-u-boot.dtsi | 4 +++
arch/arm/dts/imx8mp-rsb3720-a1-u-boot.dtsi | 8 +++++
arch/arm/dts/imx8mp-venice-u-boot.dtsi | 4 +++
.../imx8mp_rsb3720a1/imx8mp_rsb3720a1.c | 12 --------
board/beacon/imx8mm/spl.c | 19 ------------
board/beacon/imx8mn/spl.c | 10 -------
board/bsh/imx8mn_smm_s2/spl.c | 11 -------
board/compulab/imx8mm-cl-iot-gate/spl.c | 19 ------------
board/engicam/imx8mm/spl.c | 2 --
board/freescale/imx8mm_evk/spl.c | 19 ------------
board/freescale/imx8mn_evk/spl.c | 19 ------------
board/freescale/imx8mp_evk/imx8mp_evk.c | 17 -----------
board/freescale/imx8mp_evk/spl.c | 2 --
board/gateworks/venice/spl.c | 30 -------------------
board/kontron/sl-mx8mm/spl.c | 18 -----------
board/menlo/mx8menlo/mx8menlo.c | 12 --------
board/phytec/phycore_imx8mm/spl.c | 19 ------------
board/phytec/phycore_imx8mp/spl.c | 19 ------------
board/toradex/verdin-imx8mm/spl.c | 11 -------
board/toradex/verdin-imx8mp/verdin-imx8mp.c | 11 -------
board/variscite/imx8mn_var_som/spl.c | 11 -------
configs/imx8mp_evk_defconfig | 1 -
30 files changed, 48 insertions(+), 262 deletions(-)
--
2.36.0
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH V2 01/16] imx: imx8mn_evk: enable pinctrl_wdog in SPL
2022-05-05 11:05 [PATCH V2 00/16] imx: imx8m: clean up wdog code Peng Fan (OSS)
@ 2022-05-05 11:05 ` Peng Fan (OSS)
2022-05-20 13:40 ` sbabic
2022-05-05 11:05 ` [PATCH V2 02/16] imx: imx8mm_evk: " Peng Fan (OSS)
` (14 subsequent siblings)
15 siblings, 1 reply; 26+ messages in thread
From: Peng Fan (OSS) @ 2022-05-05 11:05 UTC (permalink / raw)
To: sbabic, festevam, NXP i.MX U-Boot Team, Peng Fan; +Cc: u-boot
From: Peng Fan <peng.fan@nxp.com>
Mark pinctrl_wdog as u-boot,dm-spl to clean up board code,
The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi | 4 ++++
board/freescale/imx8mn_evk/spl.c | 19 -------------------
2 files changed, 4 insertions(+), 19 deletions(-)
diff --git a/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi b/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi
index 6f70722586d..4d0ecb07d4f 100644
--- a/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi
+++ b/arch/arm/dts/imx8mn-ddr4-evk-u-boot.dtsi
@@ -80,6 +80,10 @@
u-boot,dm-spl;
};
+&pinctrl_wdog {
+ u-boot,dm-spl;
+};
+
&gpio1 {
u-boot,dm-spl;
};
diff --git a/board/freescale/imx8mn_evk/spl.c b/board/freescale/imx8mn_evk/spl.c
index 63f335be3b0..3d9aa56d2c0 100644
--- a/board/freescale/imx8mn_evk/spl.c
+++ b/board/freescale/imx8mn_evk/spl.c
@@ -115,23 +115,6 @@ int board_fit_config_name_match(const char *name)
}
#endif
-#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
-
-static iomux_v3_cfg_t const wdog_pads[] = {
- IMX8MN_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
-};
-
-int board_early_init_f(void)
-{
- struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
-
- imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
-
- set_wdog_reset(wdog);
-
- return 0;
-}
-
void board_init_f(ulong dummy)
{
int ret;
@@ -140,8 +123,6 @@ void board_init_f(ulong dummy)
init_uart_clk(1);
- board_early_init_f();
-
timer_init();
/* Clear the BSS. */
--
2.36.0
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH V2 02/16] imx: imx8mm_evk: enable pinctrl_wdog in SPL
2022-05-05 11:05 [PATCH V2 00/16] imx: imx8m: clean up wdog code Peng Fan (OSS)
2022-05-05 11:05 ` [PATCH V2 01/16] imx: imx8mn_evk: enable pinctrl_wdog in SPL Peng Fan (OSS)
@ 2022-05-05 11:05 ` Peng Fan (OSS)
2022-05-20 13:41 ` sbabic
2022-05-05 11:05 ` [PATCH V2 03/16] imx: imx8mp_evk: " Peng Fan (OSS)
` (13 subsequent siblings)
15 siblings, 1 reply; 26+ messages in thread
From: Peng Fan (OSS) @ 2022-05-05 11:05 UTC (permalink / raw)
To: sbabic, festevam, NXP i.MX U-Boot Team, Peng Fan; +Cc: u-boot
From: Peng Fan <peng.fan@nxp.com>
Mark pinctrl_wdog as u-boot,dm-spl to clean up board code,
The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
arch/arm/dts/imx8mm-evk-u-boot.dtsi | 4 ++++
board/freescale/imx8mm_evk/spl.c | 19 -------------------
2 files changed, 4 insertions(+), 19 deletions(-)
diff --git a/arch/arm/dts/imx8mm-evk-u-boot.dtsi b/arch/arm/dts/imx8mm-evk-u-boot.dtsi
index 8861542ec58..e9fbf7b8021 100644
--- a/arch/arm/dts/imx8mm-evk-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-evk-u-boot.dtsi
@@ -121,6 +121,10 @@
u-boot,dm-spl;
};
+&pinctrl_wdog {
+ u-boot,dm-spl;
+};
+
&fec1 {
phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
};
diff --git a/board/freescale/imx8mm_evk/spl.c b/board/freescale/imx8mm_evk/spl.c
index 7eeec6c485a..ae2fb73fc51 100644
--- a/board/freescale/imx8mm_evk/spl.c
+++ b/board/freescale/imx8mm_evk/spl.c
@@ -72,23 +72,6 @@ int board_fit_config_name_match(const char *name)
}
#endif
-#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
-
-static iomux_v3_cfg_t const wdog_pads[] = {
- IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
-};
-
-int board_early_init_f(void)
-{
- struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
-
- imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
-
- set_wdog_reset(wdog);
-
- return 0;
-}
-
static int power_init_board(void)
{
struct udevice *dev;
@@ -135,8 +118,6 @@ void board_init_f(ulong dummy)
init_uart_clk(1);
- board_early_init_f();
-
timer_init();
/* Clear the BSS. */
--
2.36.0
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH V2 03/16] imx: imx8mp_evk: enable pinctrl_wdog in SPL
2022-05-05 11:05 [PATCH V2 00/16] imx: imx8m: clean up wdog code Peng Fan (OSS)
2022-05-05 11:05 ` [PATCH V2 01/16] imx: imx8mn_evk: enable pinctrl_wdog in SPL Peng Fan (OSS)
2022-05-05 11:05 ` [PATCH V2 02/16] imx: imx8mm_evk: " Peng Fan (OSS)
@ 2022-05-05 11:05 ` Peng Fan (OSS)
2022-05-20 13:42 ` sbabic
2022-05-05 11:06 ` [PATCH V2 04/16] imx: imx8mm_beacon: " Peng Fan (OSS)
` (12 subsequent siblings)
15 siblings, 1 reply; 26+ messages in thread
From: Peng Fan (OSS) @ 2022-05-05 11:05 UTC (permalink / raw)
To: sbabic, festevam, NXP i.MX U-Boot Team, Peng Fan; +Cc: u-boot
From: Peng Fan <peng.fan@nxp.com>
Mark pinctrl_wdog as u-boot,dm-spl to clean up board code,
The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
arch/arm/dts/imx8mp-evk-u-boot.dtsi | 4 ++++
board/freescale/imx8mp_evk/imx8mp_evk.c | 17 -----------------
board/freescale/imx8mp_evk/spl.c | 2 --
configs/imx8mp_evk_defconfig | 1 -
4 files changed, 4 insertions(+), 20 deletions(-)
diff --git a/arch/arm/dts/imx8mp-evk-u-boot.dtsi b/arch/arm/dts/imx8mp-evk-u-boot.dtsi
index 7aa908304aa..f43eb6238d0 100644
--- a/arch/arm/dts/imx8mp-evk-u-boot.dtsi
+++ b/arch/arm/dts/imx8mp-evk-u-boot.dtsi
@@ -43,6 +43,10 @@
u-boot,dm-spl;
};
+&pinctrl_wdog {
+ u-boot,dm-spl;
+};
+
&gpio1 {
u-boot,dm-spl;
};
diff --git a/board/freescale/imx8mp_evk/imx8mp_evk.c b/board/freescale/imx8mp_evk/imx8mp_evk.c
index fb6c61c39e7..8971a827df3 100644
--- a/board/freescale/imx8mp_evk/imx8mp_evk.c
+++ b/board/freescale/imx8mp_evk/imx8mp_evk.c
@@ -20,23 +20,6 @@
DECLARE_GLOBAL_DATA_PTR;
-#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
-
-static iomux_v3_cfg_t const wdog_pads[] = {
- MX8MP_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
-};
-
-int board_early_init_f(void)
-{
- struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
-
- imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
-
- set_wdog_reset(wdog);
-
- return 0;
-}
-
static void setup_fec(void)
{
struct iomuxc_gpr_base_regs *gpr =
diff --git a/board/freescale/imx8mp_evk/spl.c b/board/freescale/imx8mp_evk/spl.c
index 503a752ae98..a2732148f24 100644
--- a/board/freescale/imx8mp_evk/spl.c
+++ b/board/freescale/imx8mp_evk/spl.c
@@ -134,8 +134,6 @@ void board_init_f(ulong dummy)
init_uart_clk(1);
- board_early_init_f();
-
ret = spl_early_init();
if (ret) {
debug("spl_init() failed: %d\n", ret);
diff --git a/configs/imx8mp_evk_defconfig b/configs/imx8mp_evk_defconfig
index 081f7e08f8e..c3ffed85998 100644
--- a/configs/imx8mp_evk_defconfig
+++ b/configs/imx8mp_evk_defconfig
@@ -27,7 +27,6 @@ CONFIG_SPL_LOAD_FIT=y
# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_DEFAULT_FDT_FILE="imx8mp-evk.dtb"
-CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_BOOTROM_SUPPORT=y
--
2.36.0
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH V2 04/16] imx: imx8mm_beacon: enable pinctrl_wdog in SPL
2022-05-05 11:05 [PATCH V2 00/16] imx: imx8m: clean up wdog code Peng Fan (OSS)
` (2 preceding siblings ...)
2022-05-05 11:05 ` [PATCH V2 03/16] imx: imx8mp_evk: " Peng Fan (OSS)
@ 2022-05-05 11:06 ` Peng Fan (OSS)
2022-05-05 11:06 ` [PATCH V2 05/16] imx: imx8mm-cl-iot-gate: " Peng Fan (OSS)
` (11 subsequent siblings)
15 siblings, 0 replies; 26+ messages in thread
From: Peng Fan (OSS) @ 2022-05-05 11:06 UTC (permalink / raw)
To: sbabic, festevam, NXP i.MX U-Boot Team, Adam Ford; +Cc: u-boot, Peng Fan
From: Peng Fan <peng.fan@nxp.com>
Mark pinctrl_wdog as u-boot,dm-spl to clean up board code,
The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi | 4 ++++
board/beacon/imx8mm/spl.c | 19 -------------------
2 files changed, 4 insertions(+), 19 deletions(-)
diff --git a/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi b/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi
index e33e10ac129..c94b4ffa4c3 100644
--- a/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi
@@ -73,6 +73,10 @@
u-boot,dm-spl;
};
+&pinctrl_wdog {
+ u-boot,dm-spl;
+};
+
&uart2 {
u-boot,dm-spl;
};
diff --git a/board/beacon/imx8mm/spl.c b/board/beacon/imx8mm/spl.c
index f92b4c3ed0a..a93cc938784 100644
--- a/board/beacon/imx8mm/spl.c
+++ b/board/beacon/imx8mm/spl.c
@@ -59,23 +59,6 @@ int board_fit_config_name_match(const char *name)
}
#endif
-#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
-
-static iomux_v3_cfg_t const wdog_pads[] = {
- IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
-};
-
-int board_early_init_f(void)
-{
- struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
-
- imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
-
- set_wdog_reset(wdog);
-
- return 0;
-}
-
static int power_init_board(void)
{
struct udevice *dev;
@@ -116,8 +99,6 @@ void board_init_f(ulong dummy)
init_uart_clk(1);
- board_early_init_f();
-
timer_init();
/* Clear the BSS. */
--
2.36.0
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH V2 05/16] imx: imx8mm-cl-iot-gate: enable pinctrl_wdog in SPL
2022-05-05 11:05 [PATCH V2 00/16] imx: imx8m: clean up wdog code Peng Fan (OSS)
` (3 preceding siblings ...)
2022-05-05 11:06 ` [PATCH V2 04/16] imx: imx8mm_beacon: " Peng Fan (OSS)
@ 2022-05-05 11:06 ` Peng Fan (OSS)
2022-05-05 11:06 ` [PATCH V2 06/16] imx: engicam-imx8mm: drop unused macro Peng Fan (OSS)
` (10 subsequent siblings)
15 siblings, 0 replies; 26+ messages in thread
From: Peng Fan (OSS) @ 2022-05-05 11:06 UTC (permalink / raw)
To: sbabic, festevam, NXP i.MX U-Boot Team, Ying-Chun Liu (PaulLiu)
Cc: u-boot, Peng Fan
From: Peng Fan <peng.fan@nxp.com>
Mark pinctrl_wdog as u-boot,dm-spl to clean up board code,
The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi | 4 ++++
board/compulab/imx8mm-cl-iot-gate/spl.c | 19 -------------------
2 files changed, 4 insertions(+), 19 deletions(-)
diff --git a/arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi b/arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi
index 433b02cceee..a7044b63699 100644
--- a/arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi
@@ -84,6 +84,10 @@
u-boot,dm-spl;
};
+&pinctrl_wdog {
+ u-boot,dm-spl;
+};
+
&uart3 {
u-boot,dm-spl;
};
diff --git a/board/compulab/imx8mm-cl-iot-gate/spl.c b/board/compulab/imx8mm-cl-iot-gate/spl.c
index f183704c9d2..d2d20269ba0 100644
--- a/board/compulab/imx8mm-cl-iot-gate/spl.c
+++ b/board/compulab/imx8mm-cl-iot-gate/spl.c
@@ -83,23 +83,6 @@ int board_fit_config_name_match(const char *name)
}
#endif
-#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
-
-static iomux_v3_cfg_t const wdog_pads[] = {
- IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
-};
-
-int board_early_init_f(void)
-{
- struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
-
- imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
-
- set_wdog_reset(wdog);
-
- return 0;
-}
-
static int power_init_board(void)
{
struct udevice *dev;
@@ -141,8 +124,6 @@ void board_init_f(ulong dummy)
arch_cpu_init();
- board_early_init_f();
-
init_uart_clk(2);
timer_init();
--
2.36.0
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH V2 06/16] imx: engicam-imx8mm: drop unused macro
2022-05-05 11:05 [PATCH V2 00/16] imx: imx8m: clean up wdog code Peng Fan (OSS)
` (4 preceding siblings ...)
2022-05-05 11:06 ` [PATCH V2 05/16] imx: imx8mm-cl-iot-gate: " Peng Fan (OSS)
@ 2022-05-05 11:06 ` Peng Fan (OSS)
2022-05-05 11:06 ` [PATCH V2 07/16] imx: imx8mm-mx8menlo: drop unneeded watchdog settings Peng Fan (OSS)
` (9 subsequent siblings)
15 siblings, 0 replies; 26+ messages in thread
From: Peng Fan (OSS) @ 2022-05-05 11:06 UTC (permalink / raw)
To: sbabic, festevam, Jagan Teki, Matteo Lisi
Cc: u-boot, Peng Fan, Michael Trimarchi
From: Peng Fan <peng.fan@nxp.com>
Drop unused WDOG macro
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
---
board/engicam/imx8mm/spl.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/board/engicam/imx8mm/spl.c b/board/engicam/imx8mm/spl.c
index f75f2dc634c..1846134a492 100644
--- a/board/engicam/imx8mm/spl.c
+++ b/board/engicam/imx8mm/spl.c
@@ -54,8 +54,6 @@ int board_fit_config_name_match(const char *name)
}
#endif
-#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
-
int board_early_init_f(void)
{
return 0;
--
2.36.0
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH V2 07/16] imx: imx8mm-mx8menlo: drop unneeded watchdog settings
2022-05-05 11:05 [PATCH V2 00/16] imx: imx8m: clean up wdog code Peng Fan (OSS)
` (5 preceding siblings ...)
2022-05-05 11:06 ` [PATCH V2 06/16] imx: engicam-imx8mm: drop unused macro Peng Fan (OSS)
@ 2022-05-05 11:06 ` Peng Fan (OSS)
2022-05-05 12:23 ` Marek Vasut
2022-05-20 13:41 ` sbabic
2022-05-05 11:06 ` [PATCH V2 08/16] imx: imx8mm/n/p-venice: enable pinctrl_wdog in SPL Peng Fan (OSS)
` (8 subsequent siblings)
15 siblings, 2 replies; 26+ messages in thread
From: Peng Fan (OSS) @ 2022-05-05 11:06 UTC (permalink / raw)
To: sbabic, festevam, Marek Vasut, Olaf Mandel; +Cc: u-boot, Peng Fan
From: Peng Fan <peng.fan@nxp.com>
pinctrl_wdog as u-boot,dm-spl already marked in imx8mm-verdin-u-boot.dtsi,
The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
board/menlo/mx8menlo/mx8menlo.c | 12 ------------
1 file changed, 12 deletions(-)
diff --git a/board/menlo/mx8menlo/mx8menlo.c b/board/menlo/mx8menlo/mx8menlo.c
index 95ff95ad360..9d3708a3637 100644
--- a/board/menlo/mx8menlo/mx8menlo.c
+++ b/board/menlo/mx8menlo/mx8menlo.c
@@ -12,12 +12,6 @@
#include <asm/mach-imx/iomux-v3.h>
#include <spl.h>
-#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
-
-static iomux_v3_cfg_t const wdog_pads[] = {
- IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
-};
-
#define SNVS_BASE_ADDR 0x30370000
#define SNVS_LPSR 0x4c
#define SNVS_LPLVDR 0x64
@@ -35,12 +29,6 @@ static void setup_snvs(void)
void board_early_init(void)
{
- struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
-
- imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
-
- set_wdog_reset(wdog);
-
init_uart_clk(1);
setup_snvs();
--
2.36.0
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH V2 08/16] imx: imx8mm/n/p-venice: enable pinctrl_wdog in SPL
2022-05-05 11:05 [PATCH V2 00/16] imx: imx8m: clean up wdog code Peng Fan (OSS)
` (6 preceding siblings ...)
2022-05-05 11:06 ` [PATCH V2 07/16] imx: imx8mm-mx8menlo: drop unneeded watchdog settings Peng Fan (OSS)
@ 2022-05-05 11:06 ` Peng Fan (OSS)
2022-05-05 11:06 ` [PATCH V2 09/16] imx: imx8mn-beacon: " Peng Fan (OSS)
` (7 subsequent siblings)
15 siblings, 0 replies; 26+ messages in thread
From: Peng Fan (OSS) @ 2022-05-05 11:06 UTC (permalink / raw)
To: sbabic, festevam, NXP i.MX U-Boot Team, Tim Harvey; +Cc: u-boot, Peng Fan
From: Peng Fan <peng.fan@nxp.com>
Mark pinctrl_wdog as u-boot,dm-spl to clean up board code,
The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
arch/arm/dts/imx8mm-venice-u-boot.dtsi | 4 ++++
arch/arm/dts/imx8mn-venice-u-boot.dtsi | 4 ++++
arch/arm/dts/imx8mp-venice-u-boot.dtsi | 4 ++++
board/gateworks/venice/spl.c | 30 --------------------------
4 files changed, 12 insertions(+), 30 deletions(-)
diff --git a/arch/arm/dts/imx8mm-venice-u-boot.dtsi b/arch/arm/dts/imx8mm-venice-u-boot.dtsi
index c61c6de935f..68978a0413e 100644
--- a/arch/arm/dts/imx8mm-venice-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-venice-u-boot.dtsi
@@ -72,3 +72,7 @@
&wdog1 {
u-boot,dm-spl;
};
+
+&pinctrl_wdog {
+ u-boot,dm-spl;
+};
diff --git a/arch/arm/dts/imx8mn-venice-u-boot.dtsi b/arch/arm/dts/imx8mn-venice-u-boot.dtsi
index 4f23da35676..35819553879 100644
--- a/arch/arm/dts/imx8mn-venice-u-boot.dtsi
+++ b/arch/arm/dts/imx8mn-venice-u-boot.dtsi
@@ -110,6 +110,10 @@
u-boot,dm-spl;
};
+&pinctrl_wdog {
+ u-boot,dm-spl;
+};
+
&binman {
u-boot-spl-ddr {
align = <4>;
diff --git a/arch/arm/dts/imx8mp-venice-u-boot.dtsi b/arch/arm/dts/imx8mp-venice-u-boot.dtsi
index 37f3edc9817..96b9fa89cf4 100644
--- a/arch/arm/dts/imx8mp-venice-u-boot.dtsi
+++ b/arch/arm/dts/imx8mp-venice-u-boot.dtsi
@@ -72,3 +72,7 @@
&wdog1 {
u-boot,dm-spl;
};
+
+&pinctrl_wdog {
+ u-boot,dm-spl;
+};
diff --git a/board/gateworks/venice/spl.c b/board/gateworks/venice/spl.c
index af196e5b87c..4c0feb4381c 100644
--- a/board/gateworks/venice/spl.c
+++ b/board/gateworks/venice/spl.c
@@ -87,34 +87,6 @@ static void spl_dram_init(int size)
ddr_init(dram_timing);
}
-#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
-
-#ifdef CONFIG_IMX8MM
-static iomux_v3_cfg_t const wdog_pads[] = {
- IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
-};
-#elif CONFIG_IMX8MN
-static const iomux_v3_cfg_t wdog_pads[] = {
- IMX8MN_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
-};
-#elif CONFIG_IMX8MP
-static const iomux_v3_cfg_t wdog_pads[] = {
- MX8MP_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
-};
-
-#endif
-
-int board_early_init_f(void)
-{
- struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
-
- imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
-
- set_wdog_reset(wdog);
-
- return 0;
-}
-
/*
* Model specific PMIC adjustments necessary prior to DRAM init
*
@@ -254,8 +226,6 @@ void board_init_f(ulong dummy)
init_uart_clk(1);
- board_early_init_f();
-
timer_init();
/* Clear the BSS. */
--
2.36.0
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH V2 09/16] imx: imx8mn-beacon: enable pinctrl_wdog in SPL
2022-05-05 11:05 [PATCH V2 00/16] imx: imx8m: clean up wdog code Peng Fan (OSS)
` (7 preceding siblings ...)
2022-05-05 11:06 ` [PATCH V2 08/16] imx: imx8mm/n/p-venice: enable pinctrl_wdog in SPL Peng Fan (OSS)
@ 2022-05-05 11:06 ` Peng Fan (OSS)
2022-05-05 11:06 ` [PATCH V2 10/16] imx: imx8mn_smm_s2: clean up board watchdog code Peng Fan (OSS)
` (6 subsequent siblings)
15 siblings, 0 replies; 26+ messages in thread
From: Peng Fan (OSS) @ 2022-05-05 11:06 UTC (permalink / raw)
To: sbabic, festevam, NXP i.MX U-Boot Team, Adam Ford; +Cc: u-boot, Peng Fan
From: Peng Fan <peng.fan@nxp.com>
Mark pinctrl_wdog as u-boot,dm-spl to clean up board code,
The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi | 4 ++++
board/beacon/imx8mn/spl.c | 10 ----------
2 files changed, 4 insertions(+), 10 deletions(-)
diff --git a/arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi b/arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi
index 69fd69c8d02..eb1dd8debba 100644
--- a/arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi
+++ b/arch/arm/dts/imx8mn-beacon-kit-u-boot.dtsi
@@ -132,6 +132,10 @@
u-boot,dm-spl;
};
+&pinctrl_wdog {
+ u-boot,dm-spl;
+};
+
&binman {
u-boot-spl-ddr {
filename = "u-boot-spl-ddr.bin";
diff --git a/board/beacon/imx8mn/spl.c b/board/beacon/imx8mn/spl.c
index 4563446db19..029f71bc995 100644
--- a/board/beacon/imx8mn/spl.c
+++ b/board/beacon/imx8mn/spl.c
@@ -68,27 +68,17 @@ int board_fit_config_name_match(const char *name)
}
#endif
-#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
#define PWM1_PAD_CTRL (PAD_CTL_FSEL2 | PAD_CTL_DSE6)
static iomux_v3_cfg_t const pwm_pads[] = {
IMX8MN_PAD_GPIO1_IO01__PWM1_OUT | MUX_PAD_CTRL(PWM1_PAD_CTRL),
};
-static iomux_v3_cfg_t const wdog_pads[] = {
- IMX8MN_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
-};
-
int board_early_init_f(void)
{
- struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
-
/* Claiming pwm pins prevents LCD flicker during startup*/
imx_iomux_v3_setup_multiple_pads(pwm_pads, ARRAY_SIZE(pwm_pads));
- imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
- set_wdog_reset(wdog);
-
init_uart_clk(1);
return 0;
--
2.36.0
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH V2 10/16] imx: imx8mn_smm_s2: clean up board watchdog code
2022-05-05 11:05 [PATCH V2 00/16] imx: imx8m: clean up wdog code Peng Fan (OSS)
` (8 preceding siblings ...)
2022-05-05 11:06 ` [PATCH V2 09/16] imx: imx8mn-beacon: " Peng Fan (OSS)
@ 2022-05-05 11:06 ` Peng Fan (OSS)
2022-05-20 13:41 ` sbabic
2022-05-05 11:06 ` [PATCH V2 11/16] imx: imx8mn_var_som: " Peng Fan (OSS)
` (5 subsequent siblings)
15 siblings, 1 reply; 26+ messages in thread
From: Peng Fan (OSS) @ 2022-05-05 11:06 UTC (permalink / raw)
To: sbabic, festevam, Ariel D'Alessandro, Michael Trimarchi
Cc: u-boot, Peng Fan
From: Peng Fan <peng.fan@nxp.com>
pinctrl_wdog already marked u-boot,dm-spl, so clean up board code.
The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
---
board/bsh/imx8mn_smm_s2/spl.c | 11 -----------
1 file changed, 11 deletions(-)
diff --git a/board/bsh/imx8mn_smm_s2/spl.c b/board/bsh/imx8mn_smm_s2/spl.c
index 0f61acc6302..4ccee7c31a8 100644
--- a/board/bsh/imx8mn_smm_s2/spl.c
+++ b/board/bsh/imx8mn_smm_s2/spl.c
@@ -40,19 +40,8 @@ void spl_board_init(void)
puts("Failed to find clock node. Check device tree\n");
}
-#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
-
-static const iomux_v3_cfg_t wdog_pads[] = {
- IMX8MN_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
-};
-
int board_early_init_f(void)
{
- struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
-
- imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
- set_wdog_reset(wdog);
-
init_uart_clk(3);
if (IS_ENABLED(CONFIG_NAND_MXS)) {
--
2.36.0
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH V2 11/16] imx: imx8mn_var_som: clean up board watchdog code
2022-05-05 11:05 [PATCH V2 00/16] imx: imx8m: clean up wdog code Peng Fan (OSS)
` (9 preceding siblings ...)
2022-05-05 11:06 ` [PATCH V2 10/16] imx: imx8mn_smm_s2: clean up board watchdog code Peng Fan (OSS)
@ 2022-05-05 11:06 ` Peng Fan (OSS)
2022-05-05 11:06 ` [PATCH V2 12/16] imx: imx8mp_rsb7320a1: enable wdog driver model in SPL Peng Fan (OSS)
` (4 subsequent siblings)
15 siblings, 0 replies; 26+ messages in thread
From: Peng Fan (OSS) @ 2022-05-05 11:06 UTC (permalink / raw)
To: sbabic, festevam, Ariel D'Alessandro; +Cc: u-boot, Peng Fan
From: Peng Fan <peng.fan@nxp.com>
pinctrl_wdog already marked u-boot,dm-spl, so clean up board code.
The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
---
board/variscite/imx8mn_var_som/spl.c | 11 -----------
1 file changed, 11 deletions(-)
diff --git a/board/variscite/imx8mn_var_som/spl.c b/board/variscite/imx8mn_var_som/spl.c
index 1a8b64fc0a9..41e70505774 100644
--- a/board/variscite/imx8mn_var_som/spl.c
+++ b/board/variscite/imx8mn_var_som/spl.c
@@ -40,19 +40,8 @@ void spl_board_init(void)
puts("Failed to find clock node. Check device tree\n");
}
-#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
-
-static const iomux_v3_cfg_t wdog_pads[] = {
- IMX8MN_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
-};
-
int board_early_init_f(void)
{
- struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
-
- imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
- set_wdog_reset(wdog);
-
init_uart_clk(3);
return 0;
--
2.36.0
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH V2 12/16] imx: imx8mp_rsb7320a1: enable wdog driver model in SPL
2022-05-05 11:05 [PATCH V2 00/16] imx: imx8m: clean up wdog code Peng Fan (OSS)
` (10 preceding siblings ...)
2022-05-05 11:06 ` [PATCH V2 11/16] imx: imx8mn_var_som: " Peng Fan (OSS)
@ 2022-05-05 11:06 ` Peng Fan (OSS)
2022-05-05 11:06 ` [PATCH V2 13/16] imx: imx8mn-kontron-n801x: enable pinctrl_wdog " Peng Fan (OSS)
` (3 subsequent siblings)
15 siblings, 0 replies; 26+ messages in thread
From: Peng Fan (OSS) @ 2022-05-05 11:06 UTC (permalink / raw)
To: sbabic, festevam, NXP i.MX U-Boot Team, Ying-Chun Liu (PaulLiu)
Cc: u-boot, Peng Fan
From: Peng Fan <peng.fan@nxp.com>
Mark wdog1/pinctrl_wdog as u-boot,dm-spl to clean up board code,
The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
arch/arm/dts/imx8mp-rsb3720-a1-u-boot.dtsi | 8 ++++++++
board/advantech/imx8mp_rsb3720a1/imx8mp_rsb3720a1.c | 12 ------------
2 files changed, 8 insertions(+), 12 deletions(-)
diff --git a/arch/arm/dts/imx8mp-rsb3720-a1-u-boot.dtsi b/arch/arm/dts/imx8mp-rsb3720-a1-u-boot.dtsi
index 2848b24f655..4419967ee42 100644
--- a/arch/arm/dts/imx8mp-rsb3720-a1-u-boot.dtsi
+++ b/arch/arm/dts/imx8mp-rsb3720-a1-u-boot.dtsi
@@ -89,6 +89,14 @@
u-boot,dm-spl;
};
+&wdog1 {
+ u-boot,dm-spl;
+};
+
+&pinctrl_wdog {
+ u-boot,dm-spl;
+};
+
&pinctrl_i2c1 {
u-boot,dm-spl;
};
diff --git a/board/advantech/imx8mp_rsb3720a1/imx8mp_rsb3720a1.c b/board/advantech/imx8mp_rsb3720a1/imx8mp_rsb3720a1.c
index f129ebd429b..0a1b2c94161 100644
--- a/board/advantech/imx8mp_rsb3720a1/imx8mp_rsb3720a1.c
+++ b/board/advantech/imx8mp_rsb3720a1/imx8mp_rsb3720a1.c
@@ -28,12 +28,6 @@
DECLARE_GLOBAL_DATA_PTR;
-#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
-
-static const iomux_v3_cfg_t wdog_pads[] = {
- MX8MP_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
-};
-
#ifdef CONFIG_NAND_MXS
static void setup_gpmi_nand(void)
{
@@ -69,12 +63,6 @@ u8 num_image_type_guids = ARRAY_SIZE(fw_images);
int board_early_init_f(void)
{
- struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
-
- imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
-
- set_wdog_reset(wdog);
-
init_uart_clk(2);
return 0;
--
2.36.0
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH V2 13/16] imx: imx8mn-kontron-n801x: enable pinctrl_wdog in SPL
2022-05-05 11:05 [PATCH V2 00/16] imx: imx8m: clean up wdog code Peng Fan (OSS)
` (11 preceding siblings ...)
2022-05-05 11:06 ` [PATCH V2 12/16] imx: imx8mp_rsb7320a1: enable wdog driver model in SPL Peng Fan (OSS)
@ 2022-05-05 11:06 ` Peng Fan (OSS)
2022-05-05 11:06 ` [PATCH V2 14/16] imx: phycore_imx8mm/p: clean up board watchdog code Peng Fan (OSS)
` (2 subsequent siblings)
15 siblings, 0 replies; 26+ messages in thread
From: Peng Fan (OSS) @ 2022-05-05 11:06 UTC (permalink / raw)
To: sbabic, festevam, NXP i.MX U-Boot Team, Frieder Schrempf; +Cc: u-boot, Peng Fan
From: Peng Fan <peng.fan@nxp.com>
Mark pinctrl_wdog as u-boot,dm-spl to clean up board code,
The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi | 4 ++++
board/kontron/sl-mx8mm/spl.c | 18 ------------------
2 files changed, 4 insertions(+), 18 deletions(-)
diff --git a/arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi b/arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi
index 22d18e6f1cf..6882513f161 100644
--- a/arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-kontron-n801x-u-boot.dtsi
@@ -126,3 +126,7 @@
&wdog1 {
u-boot,dm-spl;
};
+
+&pinctrl_wdog {
+ u-boot,dm-spl;
+};
diff --git a/board/kontron/sl-mx8mm/spl.c b/board/kontron/sl-mx8mm/spl.c
index a58a75dc958..63361f1d2ab 100644
--- a/board/kontron/sl-mx8mm/spl.c
+++ b/board/kontron/sl-mx8mm/spl.c
@@ -32,7 +32,6 @@ enum {
#define GPIO_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
#define I2C_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE)
-#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
#define TOUCH_RESET_GPIO IMX_GPIO_NR(3, 23)
@@ -50,10 +49,6 @@ static iomux_v3_cfg_t const touch_gpio[] = {
IMX8MM_PAD_SAI5_RXD2_GPIO3_IO23 | MUX_PAD_CTRL(GPIO_PAD_CTRL)
};
-static iomux_v3_cfg_t const wdog_pads[] = {
- IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
-};
-
int spl_board_boot_device(enum boot_device boot_dev_spl)
{
switch (boot_dev_spl) {
@@ -216,17 +211,6 @@ void spl_board_init(void)
printf("Failed to find clock node. Check device tree\n");
}
-int board_early_init_f(void)
-{
- struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
-
- imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
-
- set_wdog_reset(wdog);
-
- return 0;
-}
-
static int power_init_board(void)
{
struct udevice *dev;
@@ -261,8 +245,6 @@ void board_init_f(ulong dummy)
init_uart_clk(2);
- board_early_init_f();
-
timer_init();
/* Clear the BSS. */
--
2.36.0
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH V2 14/16] imx: phycore_imx8mm/p: clean up board watchdog code
2022-05-05 11:05 [PATCH V2 00/16] imx: imx8m: clean up wdog code Peng Fan (OSS)
` (12 preceding siblings ...)
2022-05-05 11:06 ` [PATCH V2 13/16] imx: imx8mn-kontron-n801x: enable pinctrl_wdog " Peng Fan (OSS)
@ 2022-05-05 11:06 ` Peng Fan (OSS)
2022-05-05 11:06 ` [PATCH V2 15/16] imx: verdin-imx8mm/p: cleanup " Peng Fan (OSS)
2022-05-05 11:06 ` [PATCH V2 16/16] imx: toradex/verdin-imx8mm/p: " Peng Fan (OSS)
15 siblings, 0 replies; 26+ messages in thread
From: Peng Fan (OSS) @ 2022-05-05 11:06 UTC (permalink / raw)
To: sbabic, festevam, Teresa Remmet; +Cc: u-boot, Peng Fan
From: Peng Fan <peng.fan@nxp.com>
pinctrl_wdog already marked u-boot,dm-spl, so clean up board code.
The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Teresa Remmet <t.remmet@phytec.de>
---
board/phytec/phycore_imx8mm/spl.c | 19 -------------------
board/phytec/phycore_imx8mp/spl.c | 19 -------------------
2 files changed, 38 deletions(-)
diff --git a/board/phytec/phycore_imx8mm/spl.c b/board/phytec/phycore_imx8mm/spl.c
index 7f24a3affc8..d87ab6d4497 100644
--- a/board/phytec/phycore_imx8mm/spl.c
+++ b/board/phytec/phycore_imx8mm/spl.c
@@ -57,23 +57,6 @@ int board_fit_config_name_match(const char *name)
return 0;
}
-#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE)
-
-static iomux_v3_cfg_t const wdog_pads[] = {
- IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
-};
-
-int board_early_init_f(void)
-{
- struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
-
- imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
-
- set_wdog_reset(wdog);
-
- return 0;
-}
-
void board_init_f(ulong dummy)
{
int ret;
@@ -82,8 +65,6 @@ void board_init_f(ulong dummy)
init_uart_clk(2);
- board_early_init_f();
-
/* Clear the BSS. */
memset(__bss_start, 0, __bss_end - __bss_start);
diff --git a/board/phytec/phycore_imx8mp/spl.c b/board/phytec/phycore_imx8mp/spl.c
index 38a581bef57..faed6fc3b76 100644
--- a/board/phytec/phycore_imx8mp/spl.c
+++ b/board/phytec/phycore_imx8mp/spl.c
@@ -89,23 +89,6 @@ int board_fit_config_name_match(const char *name)
return 0;
}
-#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
-
-static iomux_v3_cfg_t const wdog_pads[] = {
- MX8MP_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
-};
-
-int board_early_init_f(void)
-{
- struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
-
- imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
-
- set_wdog_reset(wdog);
-
- return 0;
-}
-
void board_init_f(ulong dummy)
{
int ret;
@@ -114,8 +97,6 @@ void board_init_f(ulong dummy)
init_uart_clk(0);
- board_early_init_f();
-
ret = spl_early_init();
if (ret) {
debug("spl_early_init() failed: %d\n", ret);
--
2.36.0
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH V2 15/16] imx: verdin-imx8mm/p: cleanup board watchdog code
2022-05-05 11:05 [PATCH V2 00/16] imx: imx8m: clean up wdog code Peng Fan (OSS)
` (13 preceding siblings ...)
2022-05-05 11:06 ` [PATCH V2 14/16] imx: phycore_imx8mm/p: clean up board watchdog code Peng Fan (OSS)
@ 2022-05-05 11:06 ` Peng Fan (OSS)
2022-05-16 22:24 ` Marcel Ziswiler
2022-05-20 13:43 ` sbabic
2022-05-05 11:06 ` [PATCH V2 16/16] imx: toradex/verdin-imx8mm/p: " Peng Fan (OSS)
15 siblings, 2 replies; 26+ messages in thread
From: Peng Fan (OSS) @ 2022-05-05 11:06 UTC (permalink / raw)
To: sbabic, festevam, Marcel Ziswiler; +Cc: u-boot, Peng Fan
From: Peng Fan <peng.fan@nxp.com>
pinctrl_wdog already marked u-boot,dm-spl, so clean up board code.
The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
board/toradex/verdin-imx8mp/verdin-imx8mp.c | 11 -----------
1 file changed, 11 deletions(-)
diff --git a/board/toradex/verdin-imx8mp/verdin-imx8mp.c b/board/toradex/verdin-imx8mp/verdin-imx8mp.c
index 8334c9bb376..e3c1a1201da 100644
--- a/board/toradex/verdin-imx8mp/verdin-imx8mp.c
+++ b/board/toradex/verdin-imx8mp/verdin-imx8mp.c
@@ -24,7 +24,6 @@
DECLARE_GLOBAL_DATA_PTR;
#define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1)
-#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
/* Verdin UART_3, Console/Debug UART */
static const iomux_v3_cfg_t uart_pads[] = {
@@ -32,18 +31,8 @@ static const iomux_v3_cfg_t uart_pads[] = {
MX8MP_PAD_UART3_TXD__UART3_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
};
-static const iomux_v3_cfg_t wdog_pads[] = {
- MX8MP_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
-};
-
int board_early_init_f(void)
{
- struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
-
- imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
-
- set_wdog_reset(wdog);
-
imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
init_uart_clk(2);
--
2.36.0
^ permalink raw reply related [flat|nested] 26+ messages in thread
* [PATCH V2 16/16] imx: toradex/verdin-imx8mm/p: cleanup board watchdog code
2022-05-05 11:05 [PATCH V2 00/16] imx: imx8m: clean up wdog code Peng Fan (OSS)
` (14 preceding siblings ...)
2022-05-05 11:06 ` [PATCH V2 15/16] imx: verdin-imx8mm/p: cleanup " Peng Fan (OSS)
@ 2022-05-05 11:06 ` Peng Fan (OSS)
2022-05-20 13:41 ` sbabic
15 siblings, 1 reply; 26+ messages in thread
From: Peng Fan (OSS) @ 2022-05-05 11:06 UTC (permalink / raw)
To: sbabic, festevam, Marcel Ziswiler; +Cc: u-boot, Peng Fan
From: Peng Fan <peng.fan@nxp.com>
pinctrl_wdog already marked u-boot,dm-spl, so clean up board code.
The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
board/toradex/verdin-imx8mm/spl.c | 11 -----------
1 file changed, 11 deletions(-)
diff --git a/board/toradex/verdin-imx8mm/spl.c b/board/toradex/verdin-imx8mm/spl.c
index 1f3f38351ef..1f643129d98 100644
--- a/board/toradex/verdin-imx8mm/spl.c
+++ b/board/toradex/verdin-imx8mm/spl.c
@@ -75,7 +75,6 @@ int board_fit_config_name_match(const char *name)
#endif
#define UART_PAD_CTRL (PAD_CTL_PUE | PAD_CTL_PE | PAD_CTL_DSE4)
-#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
/* Verdin UART_3, Console/Debug UART */
static iomux_v3_cfg_t const uart_pads[] = {
@@ -83,20 +82,10 @@ static iomux_v3_cfg_t const uart_pads[] = {
IMX8MM_PAD_SAI2_RXC_UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
};
-static iomux_v3_cfg_t const wdog_pads[] = {
- IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
-};
-
__weak void board_early_init(void)
{
- struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
-
init_uart_clk(0);
- imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
-
- set_wdog_reset(wdog);
-
imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
}
--
2.36.0
^ permalink raw reply related [flat|nested] 26+ messages in thread
* Re: [PATCH V2 07/16] imx: imx8mm-mx8menlo: drop unneeded watchdog settings
2022-05-05 11:06 ` [PATCH V2 07/16] imx: imx8mm-mx8menlo: drop unneeded watchdog settings Peng Fan (OSS)
@ 2022-05-05 12:23 ` Marek Vasut
2022-05-20 13:41 ` sbabic
1 sibling, 0 replies; 26+ messages in thread
From: Marek Vasut @ 2022-05-05 12:23 UTC (permalink / raw)
To: Peng Fan (OSS), sbabic, festevam, Olaf Mandel; +Cc: u-boot, Peng Fan
On 5/5/22 13:06, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> pinctrl_wdog as u-boot,dm-spl already marked in imx8mm-verdin-u-boot.dtsi,
>
> The set_wdog_reset() function is not necessary as this is handled by
> the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
> being set.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Thanks
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: [PATCH V2 15/16] imx: verdin-imx8mm/p: cleanup board watchdog code
2022-05-05 11:06 ` [PATCH V2 15/16] imx: verdin-imx8mm/p: cleanup " Peng Fan (OSS)
@ 2022-05-16 22:24 ` Marcel Ziswiler
2022-05-20 13:43 ` sbabic
1 sibling, 0 replies; 26+ messages in thread
From: Marcel Ziswiler @ 2022-05-16 22:24 UTC (permalink / raw)
To: peng.fan, festevam, sbabic; +Cc: peng.fan, u-boot
Hi Peng
On Thu, 2022-05-05 at 19:06 +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
>
> pinctrl_wdog already marked u-boot,dm-spl, so clean up board code.
>
> The set_wdog_reset() function is not necessary as this is handled by
> the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
> being set.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
> board/toradex/verdin-imx8mp/verdin-imx8mp.c | 11 -----------
> 1 file changed, 11 deletions(-)
>
> diff --git a/board/toradex/verdin-imx8mp/verdin-imx8mp.c b/board/toradex/verdin-imx8mp/verdin-imx8mp.c
> index 8334c9bb376..e3c1a1201da 100644
> --- a/board/toradex/verdin-imx8mp/verdin-imx8mp.c
> +++ b/board/toradex/verdin-imx8mp/verdin-imx8mp.c
> @@ -24,7 +24,6 @@
> DECLARE_GLOBAL_DATA_PTR;
>
> #define UART_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_FSEL1)
> -#define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
>
> /* Verdin UART_3, Console/Debug UART */
> static const iomux_v3_cfg_t uart_pads[] = {
> @@ -32,18 +31,8 @@ static const iomux_v3_cfg_t uart_pads[] = {
> MX8MP_PAD_UART3_TXD__UART3_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
> };
>
> -static const iomux_v3_cfg_t wdog_pads[] = {
> - MX8MP_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
> -};
> -
> int board_early_init_f(void)
> {
> - struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
> -
> - imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
> -
> - set_wdog_reset(wdog);
> -
> imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
>
> init_uart_clk(2);
Unfortunately, this one won't apply anymore after the following hot-fix [1] and will require re-basing.
Sorry about that.
[1] https://patchwork.ozlabs.org/project/uboot/patch/20220516222145.959359-1-marcel@ziswiler.com/
Cheers
Marcel
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH V2 01/16] imx: imx8mn_evk: enable pinctrl_wdog in SPL
2022-05-05 11:05 ` [PATCH V2 01/16] imx: imx8mn_evk: enable pinctrl_wdog in SPL Peng Fan (OSS)
@ 2022-05-20 13:40 ` sbabic
0 siblings, 0 replies; 26+ messages in thread
From: sbabic @ 2022-05-20 13:40 UTC (permalink / raw)
To: Peng Fan (OSS), u-boot
> From: Peng Fan <peng.fan@nxp.com>
> Mark pinctrl_wdog as u-boot,dm-spl to clean up board code,
> The set_wdog_reset() function is not necessary as this is handled by
> the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
> being set.
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH V2 02/16] imx: imx8mm_evk: enable pinctrl_wdog in SPL
2022-05-05 11:05 ` [PATCH V2 02/16] imx: imx8mm_evk: " Peng Fan (OSS)
@ 2022-05-20 13:41 ` sbabic
0 siblings, 0 replies; 26+ messages in thread
From: sbabic @ 2022-05-20 13:41 UTC (permalink / raw)
To: Peng Fan (OSS), u-boot
> From: Peng Fan <peng.fan@nxp.com>
> Mark pinctrl_wdog as u-boot,dm-spl to clean up board code,
> The set_wdog_reset() function is not necessary as this is handled by
> the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
> being set.
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH V2 16/16] imx: toradex/verdin-imx8mm/p: cleanup board watchdog code
2022-05-05 11:06 ` [PATCH V2 16/16] imx: toradex/verdin-imx8mm/p: " Peng Fan (OSS)
@ 2022-05-20 13:41 ` sbabic
0 siblings, 0 replies; 26+ messages in thread
From: sbabic @ 2022-05-20 13:41 UTC (permalink / raw)
To: Peng Fan (OSS), u-boot
> From: Peng Fan <peng.fan@nxp.com>
> pinctrl_wdog already marked u-boot,dm-spl, so clean up board code.
> The set_wdog_reset() function is not necessary as this is handled by
> the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
> being set.
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH V2 10/16] imx: imx8mn_smm_s2: clean up board watchdog code
2022-05-05 11:06 ` [PATCH V2 10/16] imx: imx8mn_smm_s2: clean up board watchdog code Peng Fan (OSS)
@ 2022-05-20 13:41 ` sbabic
0 siblings, 0 replies; 26+ messages in thread
From: sbabic @ 2022-05-20 13:41 UTC (permalink / raw)
To: Peng Fan (OSS), u-boot
> From: Peng Fan <peng.fan@nxp.com>
> pinctrl_wdog already marked u-boot,dm-spl, so clean up board code.
> The set_wdog_reset() function is not necessary as this is handled by
> the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
> being set.
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> Tested-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH V2 07/16] imx: imx8mm-mx8menlo: drop unneeded watchdog settings
2022-05-05 11:06 ` [PATCH V2 07/16] imx: imx8mm-mx8menlo: drop unneeded watchdog settings Peng Fan (OSS)
2022-05-05 12:23 ` Marek Vasut
@ 2022-05-20 13:41 ` sbabic
1 sibling, 0 replies; 26+ messages in thread
From: sbabic @ 2022-05-20 13:41 UTC (permalink / raw)
To: Peng Fan (OSS), u-boot
> From: Peng Fan <peng.fan@nxp.com>
> pinctrl_wdog as u-boot,dm-spl already marked in imx8mm-verdin-u-boot.dtsi,
> The set_wdog_reset() function is not necessary as this is handled by
> the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
> being set.
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> Reviewed-by: Marek Vasut <marex@denx.de>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH V2 03/16] imx: imx8mp_evk: enable pinctrl_wdog in SPL
2022-05-05 11:05 ` [PATCH V2 03/16] imx: imx8mp_evk: " Peng Fan (OSS)
@ 2022-05-20 13:42 ` sbabic
0 siblings, 0 replies; 26+ messages in thread
From: sbabic @ 2022-05-20 13:42 UTC (permalink / raw)
To: Peng Fan (OSS), u-boot
> From: Peng Fan <peng.fan@nxp.com>
> Mark pinctrl_wdog as u-boot,dm-spl to clean up board code,
> The set_wdog_reset() function is not necessary as this is handled by
> the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
> being set.
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 26+ messages in thread
* [PATCH V2 15/16] imx: verdin-imx8mm/p: cleanup board watchdog code
2022-05-05 11:06 ` [PATCH V2 15/16] imx: verdin-imx8mm/p: cleanup " Peng Fan (OSS)
2022-05-16 22:24 ` Marcel Ziswiler
@ 2022-05-20 13:43 ` sbabic
1 sibling, 0 replies; 26+ messages in thread
From: sbabic @ 2022-05-20 13:43 UTC (permalink / raw)
To: Peng Fan (OSS), u-boot
> From: Peng Fan <peng.fan@nxp.com>
> pinctrl_wdog already marked u-boot,dm-spl, so clean up board code.
> The set_wdog_reset() function is not necessary as this is handled by
> the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
> being set.
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de
=====================================================================
^ permalink raw reply [flat|nested] 26+ messages in thread
end of thread, other threads:[~2022-05-20 13:53 UTC | newest]
Thread overview: 26+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-05-05 11:05 [PATCH V2 00/16] imx: imx8m: clean up wdog code Peng Fan (OSS)
2022-05-05 11:05 ` [PATCH V2 01/16] imx: imx8mn_evk: enable pinctrl_wdog in SPL Peng Fan (OSS)
2022-05-20 13:40 ` sbabic
2022-05-05 11:05 ` [PATCH V2 02/16] imx: imx8mm_evk: " Peng Fan (OSS)
2022-05-20 13:41 ` sbabic
2022-05-05 11:05 ` [PATCH V2 03/16] imx: imx8mp_evk: " Peng Fan (OSS)
2022-05-20 13:42 ` sbabic
2022-05-05 11:06 ` [PATCH V2 04/16] imx: imx8mm_beacon: " Peng Fan (OSS)
2022-05-05 11:06 ` [PATCH V2 05/16] imx: imx8mm-cl-iot-gate: " Peng Fan (OSS)
2022-05-05 11:06 ` [PATCH V2 06/16] imx: engicam-imx8mm: drop unused macro Peng Fan (OSS)
2022-05-05 11:06 ` [PATCH V2 07/16] imx: imx8mm-mx8menlo: drop unneeded watchdog settings Peng Fan (OSS)
2022-05-05 12:23 ` Marek Vasut
2022-05-20 13:41 ` sbabic
2022-05-05 11:06 ` [PATCH V2 08/16] imx: imx8mm/n/p-venice: enable pinctrl_wdog in SPL Peng Fan (OSS)
2022-05-05 11:06 ` [PATCH V2 09/16] imx: imx8mn-beacon: " Peng Fan (OSS)
2022-05-05 11:06 ` [PATCH V2 10/16] imx: imx8mn_smm_s2: clean up board watchdog code Peng Fan (OSS)
2022-05-20 13:41 ` sbabic
2022-05-05 11:06 ` [PATCH V2 11/16] imx: imx8mn_var_som: " Peng Fan (OSS)
2022-05-05 11:06 ` [PATCH V2 12/16] imx: imx8mp_rsb7320a1: enable wdog driver model in SPL Peng Fan (OSS)
2022-05-05 11:06 ` [PATCH V2 13/16] imx: imx8mn-kontron-n801x: enable pinctrl_wdog " Peng Fan (OSS)
2022-05-05 11:06 ` [PATCH V2 14/16] imx: phycore_imx8mm/p: clean up board watchdog code Peng Fan (OSS)
2022-05-05 11:06 ` [PATCH V2 15/16] imx: verdin-imx8mm/p: cleanup " Peng Fan (OSS)
2022-05-16 22:24 ` Marcel Ziswiler
2022-05-20 13:43 ` sbabic
2022-05-05 11:06 ` [PATCH V2 16/16] imx: toradex/verdin-imx8mm/p: " Peng Fan (OSS)
2022-05-20 13:41 ` sbabic
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.