* [v2 0/3] Add dtsi for sc7280 herobrine boards that using rt5682 codec
@ 2022-05-20 16:07 ` Judy Hsiao
0 siblings, 0 replies; 6+ messages in thread
From: Judy Hsiao @ 2022-05-20 16:07 UTC (permalink / raw)
To: Andy Gross
Cc: Bjorn Andersson, Rob Herring, Srini Kandagatla, dianders, mka,
cychiang, judyhsiao, tzungbi, swboyd, linux-arm-kernel,
linux-arm-msm, devicetree, linux-kernel, Judy Hsiao
Put sound node and lpass_cpu node settings for boards that use rt5682
codec in the sc7280-herobrine-audio-rt5682.dtsi as there are different
choices of headset codec for herobrine projects. Common audio setting
for the internal speaker is in sc7280-herobrine.dtsi.
This series depends on:
"Add lpass pin control support for audio on sc7280 based targets" [1]
"Add soundcard support for sc7280 based platforms" [2]
[1] https://patchwork.kernel.org/project/linux-arm-msm/list/?series=638776
[2] https://patchwork.kernel.org/project/linux-arm-msm/list/?series=643589
Changes Since V1:
-- Remove sound-dai-cells in sound node.
-- Add dependency list.
-- Update patch subject.
Judy Hsiao (3):
arm64: dts: qcom: sc7280: herobrine: Add pinconf settings for mi2s1
arm64: dts: qcom: sc7280: Add sc7280-herobrine-audio-rt5682.dtsi
arm64: dts: qcom: sc7280: include sc7280-herobrine-audio-rt5682.dtsi
in villager and herobrine-r1
.../qcom/sc7280-herobrine-audio-rt5682.dtsi | 120 ++++++++++++++++++
.../qcom/sc7280-herobrine-herobrine-r1.dts | 1 +
.../dts/qcom/sc7280-herobrine-villager-r0.dts | 1 +
.../arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 14 ++
4 files changed, 136 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi
--
2.36.1.124.g0e6072fb45-goog
^ permalink raw reply [flat|nested] 6+ messages in thread
* [v2 0/3] Add dtsi for sc7280 herobrine boards that using rt5682 codec
@ 2022-05-20 16:07 ` Judy Hsiao
0 siblings, 0 replies; 6+ messages in thread
From: Judy Hsiao @ 2022-05-20 16:07 UTC (permalink / raw)
To: Andy Gross
Cc: Bjorn Andersson, Rob Herring, Srini Kandagatla, dianders, mka,
cychiang, judyhsiao, tzungbi, swboyd, linux-arm-kernel,
linux-arm-msm, devicetree, linux-kernel, Judy Hsiao
Put sound node and lpass_cpu node settings for boards that use rt5682
codec in the sc7280-herobrine-audio-rt5682.dtsi as there are different
choices of headset codec for herobrine projects. Common audio setting
for the internal speaker is in sc7280-herobrine.dtsi.
This series depends on:
"Add lpass pin control support for audio on sc7280 based targets" [1]
"Add soundcard support for sc7280 based platforms" [2]
[1] https://patchwork.kernel.org/project/linux-arm-msm/list/?series=638776
[2] https://patchwork.kernel.org/project/linux-arm-msm/list/?series=643589
Changes Since V1:
-- Remove sound-dai-cells in sound node.
-- Add dependency list.
-- Update patch subject.
Judy Hsiao (3):
arm64: dts: qcom: sc7280: herobrine: Add pinconf settings for mi2s1
arm64: dts: qcom: sc7280: Add sc7280-herobrine-audio-rt5682.dtsi
arm64: dts: qcom: sc7280: include sc7280-herobrine-audio-rt5682.dtsi
in villager and herobrine-r1
.../qcom/sc7280-herobrine-audio-rt5682.dtsi | 120 ++++++++++++++++++
.../qcom/sc7280-herobrine-herobrine-r1.dts | 1 +
.../dts/qcom/sc7280-herobrine-villager-r0.dts | 1 +
.../arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 14 ++
4 files changed, 136 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi
--
2.36.1.124.g0e6072fb45-goog
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread
* [v2 1/3] arm64: dts: qcom: sc7280: herobrine: Add pinconf settings for mi2s1
2022-05-20 16:07 ` Judy Hsiao
@ 2022-05-20 16:07 ` Judy Hsiao
-1 siblings, 0 replies; 6+ messages in thread
From: Judy Hsiao @ 2022-05-20 16:07 UTC (permalink / raw)
To: Andy Gross
Cc: Bjorn Andersson, Rob Herring, Srini Kandagatla, dianders, mka,
cychiang, judyhsiao, tzungbi, swboyd, linux-arm-kernel,
linux-arm-msm, devicetree, linux-kernel, Judy Hsiao
1. Add drive strength property for mi2s1 on sc7280 based platforms.
2. Disbale the pull-up mi2s1_data0, mi2s1_sclk.
Change-Id: Ie227da1076a4343b88b331a937169745fe91902c
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
---
arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index 9cb1bc8ed6b5..6d8744e130b0 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -612,6 +612,20 @@ &dp_hot_plug_det {
bias-disable;
};
+&mi2s1_data0 {
+ drive-strength = <6>;
+ bias-disable;
+};
+
+&mi2s1_sclk {
+ drive-strength = <6>;
+ bias-disable;
+};
+
+&mi2s1_ws {
+ drive-strength = <6>;
+};
+
&pcie1_clkreq_n {
bias-pull-up;
drive-strength = <2>;
--
2.36.1.124.g0e6072fb45-goog
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [v2 1/3] arm64: dts: qcom: sc7280: herobrine: Add pinconf settings for mi2s1
@ 2022-05-20 16:07 ` Judy Hsiao
0 siblings, 0 replies; 6+ messages in thread
From: Judy Hsiao @ 2022-05-20 16:07 UTC (permalink / raw)
To: Andy Gross
Cc: Bjorn Andersson, Rob Herring, Srini Kandagatla, dianders, mka,
cychiang, judyhsiao, tzungbi, swboyd, linux-arm-kernel,
linux-arm-msm, devicetree, linux-kernel, Judy Hsiao
1. Add drive strength property for mi2s1 on sc7280 based platforms.
2. Disbale the pull-up mi2s1_data0, mi2s1_sclk.
Change-Id: Ie227da1076a4343b88b331a937169745fe91902c
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
---
arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index 9cb1bc8ed6b5..6d8744e130b0 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -612,6 +612,20 @@ &dp_hot_plug_det {
bias-disable;
};
+&mi2s1_data0 {
+ drive-strength = <6>;
+ bias-disable;
+};
+
+&mi2s1_sclk {
+ drive-strength = <6>;
+ bias-disable;
+};
+
+&mi2s1_ws {
+ drive-strength = <6>;
+};
+
&pcie1_clkreq_n {
bias-pull-up;
drive-strength = <2>;
--
2.36.1.124.g0e6072fb45-goog
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [v2 0/3] Add dtsi for sc7280 herobrine boards that using rt5682 codec
@ 2022-05-20 16:10 ` Judy Hsiao
0 siblings, 0 replies; 6+ messages in thread
From: Judy Hsiao @ 2022-05-20 16:10 UTC (permalink / raw)
To: Andy Gross
Cc: Bjorn Andersson, Rob Herring, Srini Kandagatla, dianders, mka,
cychiang, judyhsiao, tzungbi, swboyd, linux-arm-kernel,
linux-arm-msm, devicetree, linux-kernel, Judy Hsiao
Put sound node and lpass_cpu node settings for boards that use rt5682
codec in the sc7280-herobrine-audio-rt5682.dtsi as there are different
choices of headset codec for herobrine projects. Common audio setting
for the internal speaker is in sc7280-herobrine.dtsi.
This series depends on:
"Add lpass pin control support for audio on sc7280 based targets" [1]
"Add soundcard support for sc7280 based platforms" [2]
[1] https://patchwork.kernel.org/project/linux-arm-msm/list/?series=638776
[2] https://patchwork.kernel.org/project/linux-arm-msm/list/?series=643589
Changes Since V1:
-- Remove sound-dai-cells in sound node.
-- Add dependency list.
-- Update patch subject.
Judy Hsiao (3):
arm64: dts: qcom: sc7280: herobrine: Add pinconf settings for mi2s1
arm64: dts: qcom: sc7280: Add sc7280-herobrine-audio-rt5682.dtsi
arm64: dts: qcom: sc7280: include sc7280-herobrine-audio-rt5682.dtsi
in villager and herobrine-r1
.../qcom/sc7280-herobrine-audio-rt5682.dtsi | 120 ++++++++++++++++++
.../qcom/sc7280-herobrine-herobrine-r1.dts | 1 +
.../dts/qcom/sc7280-herobrine-villager-r0.dts | 1 +
.../arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 14 ++
4 files changed, 136 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi
--
2.36.1.124.g0e6072fb45-goog
^ permalink raw reply [flat|nested] 6+ messages in thread
* [v2 0/3] Add dtsi for sc7280 herobrine boards that using rt5682 codec
@ 2022-05-20 16:10 ` Judy Hsiao
0 siblings, 0 replies; 6+ messages in thread
From: Judy Hsiao @ 2022-05-20 16:10 UTC (permalink / raw)
To: Andy Gross
Cc: Bjorn Andersson, Rob Herring, Srini Kandagatla, dianders, mka,
cychiang, judyhsiao, tzungbi, swboyd, linux-arm-kernel,
linux-arm-msm, devicetree, linux-kernel, Judy Hsiao
Put sound node and lpass_cpu node settings for boards that use rt5682
codec in the sc7280-herobrine-audio-rt5682.dtsi as there are different
choices of headset codec for herobrine projects. Common audio setting
for the internal speaker is in sc7280-herobrine.dtsi.
This series depends on:
"Add lpass pin control support for audio on sc7280 based targets" [1]
"Add soundcard support for sc7280 based platforms" [2]
[1] https://patchwork.kernel.org/project/linux-arm-msm/list/?series=638776
[2] https://patchwork.kernel.org/project/linux-arm-msm/list/?series=643589
Changes Since V1:
-- Remove sound-dai-cells in sound node.
-- Add dependency list.
-- Update patch subject.
Judy Hsiao (3):
arm64: dts: qcom: sc7280: herobrine: Add pinconf settings for mi2s1
arm64: dts: qcom: sc7280: Add sc7280-herobrine-audio-rt5682.dtsi
arm64: dts: qcom: sc7280: include sc7280-herobrine-audio-rt5682.dtsi
in villager and herobrine-r1
.../qcom/sc7280-herobrine-audio-rt5682.dtsi | 120 ++++++++++++++++++
.../qcom/sc7280-herobrine-herobrine-r1.dts | 1 +
.../dts/qcom/sc7280-herobrine-villager-r0.dts | 1 +
.../arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 14 ++
4 files changed, 136 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi
--
2.36.1.124.g0e6072fb45-goog
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-05-20 16:11 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-05-20 16:07 [v2 0/3] Add dtsi for sc7280 herobrine boards that using rt5682 codec Judy Hsiao
2022-05-20 16:07 ` Judy Hsiao
2022-05-20 16:07 ` [v2 1/3] arm64: dts: qcom: sc7280: herobrine: Add pinconf settings for mi2s1 Judy Hsiao
2022-05-20 16:07 ` Judy Hsiao
2022-05-20 16:10 [v2 0/3] Add dtsi for sc7280 herobrine boards that using rt5682 codec Judy Hsiao
2022-05-20 16:10 ` Judy Hsiao
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.