[PATCH v7 0/8] PCI: qcom: Rework pipe_clk/pipe_clk_src handling

[PATCH v7 0/8] PCI: qcom: Rework pipe_clk/pipe_clk_src handling

[Dmitry Baryshkov]

PCIe pipe clk (and some other clocks) must be parked to the "safe"
source (bi_tcxo) when corresponding GDSC is turned off and on again.
Currently this is handcoded in the PCIe driver by reparenting the
gcc_pipe_N_clk_src clock.

Instead of doing it manually, follow the approach used by
clk_rcg2_shared_ops and implement this parking in the enable() and
disable() clock operations for respective pipe clocks.

Changes since v7:
 - Brought back the struct clk_regmap_phy_mux (Johan)
 - Fixed includes (Stephen)

Changes since v6:
 - Switched the ops to use GENMASK/FIELD_GET/FIELD_PUT (Stephen),
 - As all pipe/symbol clock source clocks have the same register (and
   parents) layout, hardcode all the values. If the need arises, this
   can be changed later (Stephen),
 - Fixed commit messages and comments (suggested by Johan),
 - Added revert for the clk_regmap_mux_safe that have been already
   picked up by Bjorn.

Changes since v5:
 - Rename the clock to clk-regmap-phy-mux and the enable/disable values
   to phy_src_val and ref_src_val respectively (as recommended by
   Johan).

Changes since v4:
 - Renamed the clock to clk-regmap-pipe-src,
 - Added mention of PCIe2 PHY to the commit message,
 - Expanded commit messages to mention additional pipe clock details.

Changes since v3:
 - Replaced the clock multiplexer implementation with branch-like clock.

Changes since v2:
 - Added is_enabled() callback
 - Added default parent to the pipe clock configuration

Changes since v1:
 - Rebased on top of [1].
 - Removed erroneous Fixes tag from the patch 4.

Changes since RFC:
 - Rework clk-regmap-mux fields. Specify safe parent as P_* value rather
   than specifying the register value directly
 - Expand commit message to the first patch to specially mention that
   it is required only on newer generations of Qualcomm chipsets.

Dmitry Baryshkov (6):
  PCI: qcom: Remove unnecessary pipe_clk handling
  clk: qcom: regmap: add PHY clock source implementation
  clk: qcom: gcc-sm8450: use new clk_regmap_phy_mux_ops for PCIe pipe
    clocks
  clk: qcom: gcc-sc7280: use new clk_regmap_phy_mux_ops for PCIe pipe
    clocks
  Revert "clk: qcom: regmap-mux: add pipe clk implementation"
  PCI: qcom: Drop manual pipe_clk_src handling

Dmitry Baryshkov (8):
  Revert "clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for
    PCIe pipe clocks"
  Revert "clk: qcom: gcc-sc7280: use new clk_regmap_mux_safe_ops for
    PCIe pipe clocks"
  Revert "clk: qcom: regmap-mux: add pipe clk implementation"
  clk: qcom: regmap: add PHY clock source implementation
  clk: qcom: gcc-sm8450: use new clk_regmap_phy_mux_ops for PCIe pipe
    clocks
  clk: qcom: gcc-sc7280: use new clk_regmap_phy_mux_ops for PCIe pipe
    clocks
  PCI: qcom: Remove unnecessary pipe_clk handling
  PCI: qcom: Drop manual pipe_clk_src handling

 drivers/clk/qcom/Makefile              |  1 +
 drivers/clk/qcom/clk-regmap-mux.c      | 78 -------------------------
 drivers/clk/qcom/clk-regmap-mux.h      |  3 -
 drivers/clk/qcom/clk-regmap-phy-mux.c  | 62 ++++++++++++++++++++
 drivers/clk/qcom/clk-regmap-phy-mux.h  | 33 +++++++++++
 drivers/clk/qcom/gcc-sc7280.c          | 49 +++++-----------
 drivers/clk/qcom/gcc-sm8450.c          | 51 +++++-----------
 drivers/pci/controller/dwc/pcie-qcom.c | 81 +-------------------------
 8 files changed, 125 insertions(+), 233 deletions(-)
 create mode 100644 drivers/clk/qcom/clk-regmap-phy-mux.c
 create mode 100644 drivers/clk/qcom/clk-regmap-phy-mux.h

-- 
2.35.1

[PATCH v7 1/8] Revert "clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for PCIe pipe clocks"

[Dmitry Baryshkov]

Johan Hovold has pointed out that there are several deficiencies and a
race condition in the regmap_mux_safe ops that were merged. Revert the
commit that switches gcc-sm8450 driver to use regmap_mux_safe.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/clk/qcom/gcc-sm8450.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/qcom/gcc-sm8450.c b/drivers/clk/qcom/gcc-sm8450.c
index fb6decd3df49..593a195467ff 100644
--- a/drivers/clk/qcom/gcc-sm8450.c
+++ b/drivers/clk/qcom/gcc-sm8450.c
@@ -243,14 +243,13 @@ static struct clk_regmap_mux gcc_pcie_0_pipe_clk_src = {
 	.reg = 0x7b060,
 	.shift = 0,
 	.width = 2,
-	.safe_src_parent = P_BI_TCXO,
 	.parent_map = gcc_parent_map_4,
 	.clkr = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_pcie_0_pipe_clk_src",
 			.parent_data = gcc_parent_data_4,
 			.num_parents = ARRAY_SIZE(gcc_parent_data_4),
-			.ops = &clk_regmap_mux_safe_ops,
+			.ops = &clk_regmap_mux_closest_ops,
 		},
 	},
 };
@@ -274,14 +273,13 @@ static struct clk_regmap_mux gcc_pcie_1_pipe_clk_src = {
 	.reg = 0x9d064,
 	.shift = 0,
 	.width = 2,
-	.safe_src_parent = P_BI_TCXO,
 	.parent_map = gcc_parent_map_6,
 	.clkr = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_pcie_1_pipe_clk_src",
 			.parent_data = gcc_parent_data_6,
 			.num_parents = ARRAY_SIZE(gcc_parent_data_6),
-			.ops = &clk_regmap_mux_safe_ops,
+			.ops = &clk_regmap_mux_closest_ops,
 		},
 	},
 };
-- 
2.35.1

[PATCH v7 2/8] Revert "clk: qcom: gcc-sc7280: use new clk_regmap_mux_safe_ops for PCIe pipe clocks"

[Dmitry Baryshkov]

Johan Hovold has pointed out that there are several deficiencies and a
race condition in the regmap_mux_safe ops that were merged. Revert the
commit that switches gcc-sc7280 driver to use regmap_mux_safe.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/clk/qcom/gcc-sc7280.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/qcom/gcc-sc7280.c b/drivers/clk/qcom/gcc-sc7280.c
index dafbbc8f3bf4..423627d49719 100644
--- a/drivers/clk/qcom/gcc-sc7280.c
+++ b/drivers/clk/qcom/gcc-sc7280.c
@@ -373,14 +373,13 @@ static struct clk_regmap_mux gcc_pcie_0_pipe_clk_src = {
 	.reg = 0x6b054,
 	.shift = 0,
 	.width = 2,
-	.safe_src_parent = P_BI_TCXO,
 	.parent_map = gcc_parent_map_6,
 	.clkr = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_pcie_0_pipe_clk_src",
 			.parent_data = gcc_parent_data_6,
 			.num_parents = ARRAY_SIZE(gcc_parent_data_6),
-			.ops = &clk_regmap_mux_safe_ops,
+			.ops = &clk_regmap_mux_closest_ops,
 		},
 	},
 };
@@ -389,14 +388,13 @@ static struct clk_regmap_mux gcc_pcie_1_pipe_clk_src = {
 	.reg = 0x8d054,
 	.shift = 0,
 	.width = 2,
-	.safe_src_parent = P_BI_TCXO,
 	.parent_map = gcc_parent_map_7,
 	.clkr = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_pcie_1_pipe_clk_src",
 			.parent_data = gcc_parent_data_7,
 			.num_parents = ARRAY_SIZE(gcc_parent_data_7),
-			.ops = &clk_regmap_mux_safe_ops,
+			.ops = &clk_regmap_mux_closest_ops,
 		},
 	},
 };
-- 
2.35.1

[PATCH v7 3/8] Revert "clk: qcom: regmap-mux: add pipe clk implementation"

[Dmitry Baryshkov]

Johan Hovold has pointed out that there are several deficiencies and a
race condition in the regmap_mux_safe ops that were merged. Pipe clocks
has been updated to use newer and simpler clk_regmap_phy_mux_ops. Drop
the regmap-mux-safe clock ops now.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/clk/qcom/clk-regmap-mux.c | 78 -------------------------------
 drivers/clk/qcom/clk-regmap-mux.h |  3 --
 2 files changed, 81 deletions(-)

diff --git a/drivers/clk/qcom/clk-regmap-mux.c b/drivers/clk/qcom/clk-regmap-mux.c
index c39ee783ee83..45d9cca28064 100644
--- a/drivers/clk/qcom/clk-regmap-mux.c
+++ b/drivers/clk/qcom/clk-regmap-mux.c
@@ -49,87 +49,9 @@ static int mux_set_parent(struct clk_hw *hw, u8 index)
 	return regmap_update_bits(clkr->regmap, mux->reg, mask, val);
 }
 
-static u8 mux_safe_get_parent(struct clk_hw *hw)
-{
-	struct clk_regmap_mux *mux = to_clk_regmap_mux(hw);
-	unsigned int val;
-
-	if (clk_hw_is_enabled(hw))
-		return mux_get_parent(hw);
-
-	val = mux->stored_parent_cfg;
-
-	if (mux->parent_map)
-		return qcom_find_cfg_index(hw, mux->parent_map, val);
-
-	return val;
-}
-
-static int mux_safe_set_parent(struct clk_hw *hw, u8 index)
-{
-	struct clk_regmap_mux *mux = to_clk_regmap_mux(hw);
-
-	if (clk_hw_is_enabled(hw))
-		return mux_set_parent(hw, index);
-
-	if (mux->parent_map)
-		index = mux->parent_map[index].cfg;
-
-	mux->stored_parent_cfg = index;
-
-	return 0;
-}
-
-static void mux_safe_disable(struct clk_hw *hw)
-{
-	struct clk_regmap_mux *mux = to_clk_regmap_mux(hw);
-	struct clk_regmap *clkr = to_clk_regmap(hw);
-	unsigned int mask = GENMASK(mux->width + mux->shift - 1, mux->shift);
-	unsigned int val;
-
-	regmap_read(clkr->regmap, mux->reg, &val);
-
-	mux->stored_parent_cfg = (val & mask) >> mux->shift;
-
-	val = mux->safe_src_parent;
-	if (mux->parent_map) {
-		int index = qcom_find_src_index(hw, mux->parent_map, val);
-
-		if (WARN_ON(index < 0))
-			return;
-
-		val = mux->parent_map[index].cfg;
-	}
-	val <<= mux->shift;
-
-	regmap_update_bits(clkr->regmap, mux->reg, mask, val);
-}
-
-static int mux_safe_enable(struct clk_hw *hw)
-{
-	struct clk_regmap_mux *mux = to_clk_regmap_mux(hw);
-	struct clk_regmap *clkr = to_clk_regmap(hw);
-	unsigned int mask = GENMASK(mux->width + mux->shift - 1, mux->shift);
-	unsigned int val;
-
-	val = mux->stored_parent_cfg;
-	val <<= mux->shift;
-
-	return regmap_update_bits(clkr->regmap, mux->reg, mask, val);
-}
-
 const struct clk_ops clk_regmap_mux_closest_ops = {
 	.get_parent = mux_get_parent,
 	.set_parent = mux_set_parent,
 	.determine_rate = __clk_mux_determine_rate_closest,
 };
 EXPORT_SYMBOL_GPL(clk_regmap_mux_closest_ops);
-
-const struct clk_ops clk_regmap_mux_safe_ops = {
-	.enable = mux_safe_enable,
-	.disable = mux_safe_disable,
-	.get_parent = mux_safe_get_parent,
-	.set_parent = mux_safe_set_parent,
-	.determine_rate = __clk_mux_determine_rate_closest,
-};
-EXPORT_SYMBOL_GPL(clk_regmap_mux_safe_ops);
diff --git a/drivers/clk/qcom/clk-regmap-mux.h b/drivers/clk/qcom/clk-regmap-mux.h
index f86c674ce139..db6f4cdd9586 100644
--- a/drivers/clk/qcom/clk-regmap-mux.h
+++ b/drivers/clk/qcom/clk-regmap-mux.h
@@ -14,13 +14,10 @@ struct clk_regmap_mux {
 	u32			reg;
 	u32			shift;
 	u32			width;
-	u8			safe_src_parent;
-	u8			stored_parent_cfg;
 	const struct parent_map	*parent_map;
 	struct clk_regmap	clkr;
 };
 
 extern const struct clk_ops clk_regmap_mux_closest_ops;
-extern const struct clk_ops clk_regmap_mux_safe_ops;
 
 #endif
-- 
2.35.1

[PATCH v7 4/8] clk: qcom: regmap: add PHY clock source implementation

[Dmitry Baryshkov]

On recent Qualcomm platforms the QMP PIPE clocks feed into a set of
muxes which must be parked to the "safe" source (bi_tcxo) when
corresponding GDSC is turned off and on again. Currently this is
handcoded in the PCIe driver by reparenting the gcc_pipe_N_clk_src
clock. However the same code sequence should be applied in the
pcie-qcom endpoint, USB3 and UFS drivers.

Rather than copying this sequence over and over again, follow the
example of clk_rcg2_shared_ops and implement this parking in the
enable() and disable() clock operations. Supplement the regmap-mux with
the new clk_regmap_phy_mux type, which implements such multiplexers
as a simple gate clocks.

This is possible since each of these multiplexers has just two clock
sources: one coming from the PHY and a reference (XO) one.  If the clock
is running off the from-PHY source, report it as enabled. Report it as
disabled otherwise (if it uses reference source).

This way the PHY will disable the pipe clock before turning off the
GDSC, which in turn would lead to disabling corresponding pipe_clk_src
(and thus it being parked to a safe, reference clock source). And vice
versa, after enabling the GDSC the PHY will enable the pipe clock, which
would cause pipe_clk_src to be switched from a safe source to the
working one.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/clk/qcom/Makefile             |  1 +
 drivers/clk/qcom/clk-regmap-phy-mux.c | 62 +++++++++++++++++++++++++++
 drivers/clk/qcom/clk-regmap-phy-mux.h | 33 ++++++++++++++
 3 files changed, 96 insertions(+)
 create mode 100644 drivers/clk/qcom/clk-regmap-phy-mux.c
 create mode 100644 drivers/clk/qcom/clk-regmap-phy-mux.h

diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 36789f5233ef..08594230c1c1 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -11,6 +11,7 @@ clk-qcom-y += clk-branch.o
 clk-qcom-y += clk-regmap-divider.o
 clk-qcom-y += clk-regmap-mux.o
 clk-qcom-y += clk-regmap-mux-div.o
+clk-qcom-y += clk-regmap-phy-mux.o
 clk-qcom-$(CONFIG_KRAIT_CLOCKS) += clk-krait.o
 clk-qcom-y += clk-hfpll.o
 clk-qcom-y += reset.o
diff --git a/drivers/clk/qcom/clk-regmap-phy-mux.c b/drivers/clk/qcom/clk-regmap-phy-mux.c
new file mode 100644
index 000000000000..a1adc075b471
--- /dev/null
+++ b/drivers/clk/qcom/clk-regmap-phy-mux.c
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, Linaro Ltd.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/bitops.h>
+#include <linux/regmap.h>
+#include <linux/export.h>
+
+#include "clk-regmap.h"
+#include "clk-regmap-phy-mux.h"
+
+#define PHY_MUX_MASK		GENMASK(1, 0)
+#define PHY_MUX_PHY_SRC		0
+#define PHY_MUX_REF_SRC		2
+
+static inline struct clk_regmap_phy_mux *to_clk_regmap_phy_mux(struct clk_regmap *clkr)
+{
+	return container_of(clkr, struct clk_regmap_phy_mux, clkr);
+}
+
+static int phy_mux_is_enabled(struct clk_hw *hw)
+{
+	struct clk_regmap *clkr = to_clk_regmap(hw);
+	struct clk_regmap_phy_mux *phy_mux = to_clk_regmap_phy_mux(clkr);
+	unsigned int val;
+
+	regmap_read(clkr->regmap, phy_mux->reg, &val);
+	val = FIELD_GET(PHY_MUX_MASK, val);
+
+	WARN_ON(val != PHY_MUX_PHY_SRC && val != PHY_MUX_REF_SRC);
+
+	return val == PHY_MUX_PHY_SRC;
+}
+
+static int phy_mux_enable(struct clk_hw *hw)
+{
+	struct clk_regmap *clkr = to_clk_regmap(hw);
+	struct clk_regmap_phy_mux *phy_mux = to_clk_regmap_phy_mux(clkr);
+
+	return regmap_update_bits(clkr->regmap, phy_mux->reg,
+				  PHY_MUX_MASK,
+				  FIELD_PREP(PHY_MUX_MASK, PHY_MUX_PHY_SRC));
+}
+
+static void phy_mux_disable(struct clk_hw *hw)
+{
+	struct clk_regmap *clkr = to_clk_regmap(hw);
+	struct clk_regmap_phy_mux *phy_mux = to_clk_regmap_phy_mux(clkr);
+
+	regmap_update_bits(clkr->regmap, phy_mux->reg,
+			   PHY_MUX_MASK,
+			   FIELD_PREP(PHY_MUX_MASK, PHY_MUX_REF_SRC));
+}
+
+const struct clk_ops clk_regmap_phy_mux_ops = {
+	.enable = phy_mux_enable,
+	.disable = phy_mux_disable,
+	.is_enabled = phy_mux_is_enabled,
+};
+EXPORT_SYMBOL_GPL(clk_regmap_phy_mux_ops);
diff --git a/drivers/clk/qcom/clk-regmap-phy-mux.h b/drivers/clk/qcom/clk-regmap-phy-mux.h
new file mode 100644
index 000000000000..614dd384695c
--- /dev/null
+++ b/drivers/clk/qcom/clk-regmap-phy-mux.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2022, Linaro Ltd.
+ */
+
+#ifndef __QCOM_CLK_REGMAP_PHY_MUX_H__
+#define __QCOM_CLK_REGMAP_PHY_MUX_H__
+
+#include "clk-regmap.h"
+
+/*
+ * A clock implementation for PHY pipe and symbols clock muxes.
+ *
+ * If the clock is running off the from-PHY source, report it as enabled.
+ * Report it as disabled otherwise (if it uses reference source).
+ *
+ * This way the PHY will disable the pipe clock before turning off the GDSC,
+ * which in turn would lead to disabling corresponding pipe_clk_src (and thus
+ * it being parked to a safe, reference clock source). And vice versa, after
+ * enabling the GDSC the PHY will enable the pipe clock, which would cause
+ * pipe_clk_src to be switched from a safe source to the working one.
+ *
+ * For some platforms this should be used for the UFS symbol_clk_src clocks
+ * too.
+ */
+struct clk_regmap_phy_mux {
+	u32			reg;
+	struct clk_regmap	clkr;
+};
+
+extern const struct clk_ops clk_regmap_phy_mux_ops;
+
+#endif
-- 
2.35.1

[PATCH v7 5/8] clk: qcom: gcc-sm8450: use new clk_regmap_phy_mux_ops for PCIe pipe clocks

[Dmitry Baryshkov]

Use newly defined clk_regmap_phy_mux_ops for PCIe pipe clocks to let
the clock framework automatically park the clock when the clock is
switched off and restore the parent when the clock is switched on.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/clk/qcom/gcc-sm8450.c | 49 ++++++++++-------------------------
 1 file changed, 13 insertions(+), 36 deletions(-)

diff --git a/drivers/clk/qcom/gcc-sm8450.c b/drivers/clk/qcom/gcc-sm8450.c
index 593a195467ff..666efa5ff978 100644
--- a/drivers/clk/qcom/gcc-sm8450.c
+++ b/drivers/clk/qcom/gcc-sm8450.c
@@ -17,6 +17,7 @@
 #include "clk-regmap.h"
 #include "clk-regmap-divider.h"
 #include "clk-regmap-mux.h"
+#include "clk-regmap-phy-mux.h"
 #include "gdsc.h"
 #include "reset.h"
 
@@ -26,9 +27,7 @@ enum {
 	P_GCC_GPLL0_OUT_MAIN,
 	P_GCC_GPLL4_OUT_MAIN,
 	P_GCC_GPLL9_OUT_MAIN,
-	P_PCIE_0_PIPE_CLK,
 	P_PCIE_1_PHY_AUX_CLK,
-	P_PCIE_1_PIPE_CLK,
 	P_SLEEP_CLK,
 	P_UFS_PHY_RX_SYMBOL_0_CLK,
 	P_UFS_PHY_RX_SYMBOL_1_CLK,
@@ -153,16 +152,6 @@ static const struct clk_parent_data gcc_parent_data_3[] = {
 	{ .fw_name = "bi_tcxo" },
 };
 
-static const struct parent_map gcc_parent_map_4[] = {
-	{ P_PCIE_0_PIPE_CLK, 0 },
-	{ P_BI_TCXO, 2 },
-};
-
-static const struct clk_parent_data gcc_parent_data_4[] = {
-	{ .fw_name = "pcie_0_pipe_clk", },
-	{ .fw_name = "bi_tcxo", },
-};
-
 static const struct parent_map gcc_parent_map_5[] = {
 	{ P_PCIE_1_PHY_AUX_CLK, 0 },
 	{ P_BI_TCXO, 2 },
@@ -173,16 +162,6 @@ static const struct clk_parent_data gcc_parent_data_5[] = {
 	{ .fw_name = "bi_tcxo" },
 };
 
-static const struct parent_map gcc_parent_map_6[] = {
-	{ P_PCIE_1_PIPE_CLK, 0 },
-	{ P_BI_TCXO, 2 },
-};
-
-static const struct clk_parent_data gcc_parent_data_6[] = {
-	{ .fw_name = "pcie_1_pipe_clk" },
-	{ .fw_name = "bi_tcxo" },
-};
-
 static const struct parent_map gcc_parent_map_7[] = {
 	{ P_BI_TCXO, 0 },
 	{ P_GCC_GPLL0_OUT_MAIN, 1 },
@@ -239,17 +218,16 @@ static const struct clk_parent_data gcc_parent_data_11[] = {
 	{ .fw_name = "bi_tcxo" },
 };
 
-static struct clk_regmap_mux gcc_pcie_0_pipe_clk_src = {
+static struct clk_regmap_phy_mux gcc_pcie_0_pipe_clk_src = {
 	.reg = 0x7b060,
-	.shift = 0,
-	.width = 2,
-	.parent_map = gcc_parent_map_4,
 	.clkr = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_pcie_0_pipe_clk_src",
-			.parent_data = gcc_parent_data_4,
-			.num_parents = ARRAY_SIZE(gcc_parent_data_4),
-			.ops = &clk_regmap_mux_closest_ops,
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "pcie_0_pipe_clk",
+			},
+			.num_parents = 1,
+			.ops = &clk_regmap_phy_mux_ops,
 		},
 	},
 };
@@ -269,17 +247,16 @@ static struct clk_regmap_mux gcc_pcie_1_phy_aux_clk_src = {
 	},
 };
 
-static struct clk_regmap_mux gcc_pcie_1_pipe_clk_src = {
+static struct clk_regmap_phy_mux gcc_pcie_1_pipe_clk_src = {
 	.reg = 0x9d064,
-	.shift = 0,
-	.width = 2,
-	.parent_map = gcc_parent_map_6,
 	.clkr = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_pcie_1_pipe_clk_src",
-			.parent_data = gcc_parent_data_6,
-			.num_parents = ARRAY_SIZE(gcc_parent_data_6),
-			.ops = &clk_regmap_mux_closest_ops,
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "pcie_1_pipe_clk",
+			},
+			.num_parents = 1,
+			.ops = &clk_regmap_phy_mux_ops,
 		},
 	},
 };
-- 
2.35.1

[PATCH v7 6/8] clk: qcom: gcc-sc7280: use new clk_regmap_phy_mux_ops for PCIe pipe clocks

[Dmitry Baryshkov]

Use newly defined clk_regmap_phy_mux_ops for PCIe pipe clocks to let
the clock framework automatically park the clock when the clock is
switched off and restore the parent when the clock is switched on.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/clk/qcom/gcc-sc7280.c | 47 ++++++++++-------------------------
 1 file changed, 13 insertions(+), 34 deletions(-)

diff --git a/drivers/clk/qcom/gcc-sc7280.c b/drivers/clk/qcom/gcc-sc7280.c
index 423627d49719..45a98b01d0f7 100644
--- a/drivers/clk/qcom/gcc-sc7280.c
+++ b/drivers/clk/qcom/gcc-sc7280.c
@@ -17,6 +17,7 @@
 #include "clk-rcg.h"
 #include "clk-regmap-divider.h"
 #include "clk-regmap-mux.h"
+#include "clk-regmap-phy-mux.h"
 #include "common.h"
 #include "gdsc.h"
 #include "reset.h"
@@ -255,26 +256,6 @@ static const struct clk_parent_data gcc_parent_data_5[] = {
 	{ .hw = &gcc_gpll0_out_even.clkr.hw },
 };
 
-static const struct parent_map gcc_parent_map_6[] = {
-	{ P_PCIE_0_PIPE_CLK, 0 },
-	{ P_BI_TCXO, 2 },
-};
-
-static const struct clk_parent_data gcc_parent_data_6[] = {
-	{ .fw_name = "pcie_0_pipe_clk", .name = "pcie_0_pipe_clk" },
-	{ .fw_name = "bi_tcxo" },
-};
-
-static const struct parent_map gcc_parent_map_7[] = {
-	{ P_PCIE_1_PIPE_CLK, 0 },
-	{ P_BI_TCXO, 2 },
-};
-
-static const struct clk_parent_data gcc_parent_data_7[] = {
-	{ .fw_name = "pcie_1_pipe_clk", .name = "pcie_1_pipe_clk" },
-	{ .fw_name = "bi_tcxo" },
-};
-
 static const struct parent_map gcc_parent_map_8[] = {
 	{ P_BI_TCXO, 0 },
 	{ P_GCC_GPLL0_OUT_MAIN, 1 },
@@ -369,32 +350,30 @@ static const struct clk_parent_data gcc_parent_data_15[] = {
 	{ .hw = &gcc_mss_gpll0_main_div_clk_src.clkr.hw },
 };
 
-static struct clk_regmap_mux gcc_pcie_0_pipe_clk_src = {
+static struct clk_regmap_phy_mux gcc_pcie_0_pipe_clk_src = {
 	.reg = 0x6b054,
-	.shift = 0,
-	.width = 2,
-	.parent_map = gcc_parent_map_6,
 	.clkr = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_pcie_0_pipe_clk_src",
-			.parent_data = gcc_parent_data_6,
-			.num_parents = ARRAY_SIZE(gcc_parent_data_6),
-			.ops = &clk_regmap_mux_closest_ops,
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "pcie_0_pipe_clk",
+			},
+			.num_parents = 1,
+			.ops = &clk_regmap_phy_mux_ops,
 		},
 	},
 };
 
-static struct clk_regmap_mux gcc_pcie_1_pipe_clk_src = {
+static struct clk_regmap_phy_mux gcc_pcie_1_pipe_clk_src = {
 	.reg = 0x8d054,
-	.shift = 0,
-	.width = 2,
-	.parent_map = gcc_parent_map_7,
 	.clkr = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_pcie_1_pipe_clk_src",
-			.parent_data = gcc_parent_data_7,
-			.num_parents = ARRAY_SIZE(gcc_parent_data_7),
-			.ops = &clk_regmap_mux_closest_ops,
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "pcie_1_pipe_clk",
+			},
+			.num_parents = 1,
+			.ops = &clk_regmap_phy_mux_ops,
 		},
 	},
 };
-- 
2.35.1

[PATCH v7 7/8] PCI: qcom: Remove unnecessary pipe_clk handling

[Dmitry Baryshkov]

PCIe PHY drivers (both QMP and PCIe2) already do clk_prepare_enable() /
clk_prepare_disable() pipe_clk. Remove extra calls to enable/disable
this clock from the PCIe driver, so that the PHY driver can manage the
clock on its own.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 44 ++------------------------
 1 file changed, 3 insertions(+), 41 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 9055bb20777e..91e58edc7ea9 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -128,7 +128,6 @@ struct qcom_pcie_resources_2_3_2 {
 	struct clk *master_clk;
 	struct clk *slave_clk;
 	struct clk *cfg_clk;
-	struct clk *pipe_clk;
 	struct regulator_bulk_data supplies[QCOM_PCIE_2_3_2_MAX_SUPPLY];
 };
 
@@ -165,7 +164,6 @@ struct qcom_pcie_resources_2_7_0 {
 	int num_clks;
 	struct regulator_bulk_data supplies[2];
 	struct reset_control *pci_reset;
-	struct clk *pipe_clk;
 	struct clk *pipe_clk_src;
 	struct clk *phy_pipe_clk;
 	struct clk *ref_clk_src;
@@ -597,8 +595,7 @@ static int qcom_pcie_get_resources_2_3_2(struct qcom_pcie *pcie)
 	if (IS_ERR(res->slave_clk))
 		return PTR_ERR(res->slave_clk);
 
-	res->pipe_clk = devm_clk_get(dev, "pipe");
-	return PTR_ERR_OR_ZERO(res->pipe_clk);
+	return 0;
 }
 
 static void qcom_pcie_deinit_2_3_2(struct qcom_pcie *pcie)
@@ -613,13 +610,6 @@ static void qcom_pcie_deinit_2_3_2(struct qcom_pcie *pcie)
 	regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
 }
 
-static void qcom_pcie_post_deinit_2_3_2(struct qcom_pcie *pcie)
-{
-	struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
-
-	clk_disable_unprepare(res->pipe_clk);
-}
-
 static int qcom_pcie_init_2_3_2(struct qcom_pcie *pcie)
 {
 	struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
@@ -694,22 +684,6 @@ static int qcom_pcie_init_2_3_2(struct qcom_pcie *pcie)
 	return ret;
 }
 
-static int qcom_pcie_post_init_2_3_2(struct qcom_pcie *pcie)
-{
-	struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
-	struct dw_pcie *pci = pcie->pci;
-	struct device *dev = pci->dev;
-	int ret;
-
-	ret = clk_prepare_enable(res->pipe_clk);
-	if (ret) {
-		dev_err(dev, "cannot prepare/enable pipe clock\n");
-		return ret;
-	}
-
-	return 0;
-}
-
 static int qcom_pcie_get_resources_2_4_0(struct qcom_pcie *pcie)
 {
 	struct qcom_pcie_resources_2_4_0 *res = &pcie->res.v2_4_0;
@@ -1198,8 +1172,7 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
 			return PTR_ERR(res->ref_clk_src);
 	}
 
-	res->pipe_clk = devm_clk_get(dev, "pipe");
-	return PTR_ERR_OR_ZERO(res->pipe_clk);
+	return 0;
 }
 
 static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
@@ -1292,14 +1265,7 @@ static int qcom_pcie_post_init_2_7_0(struct qcom_pcie *pcie)
 	if (pcie->cfg->pipe_clk_need_muxing)
 		clk_set_parent(res->pipe_clk_src, res->phy_pipe_clk);
 
-	return clk_prepare_enable(res->pipe_clk);
-}
-
-static void qcom_pcie_post_deinit_2_7_0(struct qcom_pcie *pcie)
-{
-	struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
-
-	clk_disable_unprepare(res->pipe_clk);
+	return 0;
 }
 
 static int qcom_pcie_link_up(struct dw_pcie *pci)
@@ -1449,9 +1415,7 @@ static const struct qcom_pcie_ops ops_1_0_0 = {
 static const struct qcom_pcie_ops ops_2_3_2 = {
 	.get_resources = qcom_pcie_get_resources_2_3_2,
 	.init = qcom_pcie_init_2_3_2,
-	.post_init = qcom_pcie_post_init_2_3_2,
 	.deinit = qcom_pcie_deinit_2_3_2,
-	.post_deinit = qcom_pcie_post_deinit_2_3_2,
 	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
 };
 
@@ -1478,7 +1442,6 @@ static const struct qcom_pcie_ops ops_2_7_0 = {
 	.deinit = qcom_pcie_deinit_2_7_0,
 	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
 	.post_init = qcom_pcie_post_init_2_7_0,
-	.post_deinit = qcom_pcie_post_deinit_2_7_0,
 };
 
 /* Qcom IP rev.: 1.9.0 */
@@ -1488,7 +1451,6 @@ static const struct qcom_pcie_ops ops_1_9_0 = {
 	.deinit = qcom_pcie_deinit_2_7_0,
 	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
 	.post_init = qcom_pcie_post_init_2_7_0,
-	.post_deinit = qcom_pcie_post_deinit_2_7_0,
 	.config_sid = qcom_pcie_config_sid_sm8250,
 };
 
-- 
2.35.1

[PATCH v7 8/8] PCI: qcom: Drop manual pipe_clk_src handling

[Dmitry Baryshkov]

Manual reparenting of pipe_clk_src is being replaced with the parking of
the clock with clk_disable()/clk_enable() in the phy driver. Drop
redundant code switching of the pipe clock between the PHY clock source
and the safe bi_tcxo.

Cc: Prasad Malisetty <quic_pmaliset@quicinc.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 39 +-------------------------
 1 file changed, 1 insertion(+), 38 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 91e58edc7ea9..e83085e1bf4b 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -164,9 +164,6 @@ struct qcom_pcie_resources_2_7_0 {
 	int num_clks;
 	struct regulator_bulk_data supplies[2];
 	struct reset_control *pci_reset;
-	struct clk *pipe_clk_src;
-	struct clk *phy_pipe_clk;
-	struct clk *ref_clk_src;
 };
 
 union qcom_pcie_resources {
@@ -192,7 +189,6 @@ struct qcom_pcie_ops {
 
 struct qcom_pcie_cfg {
 	const struct qcom_pcie_ops *ops;
-	unsigned int pipe_clk_need_muxing:1;
 	unsigned int has_tbu_clk:1;
 	unsigned int has_ddrss_sf_tbu_clk:1;
 	unsigned int has_aggre0_clk:1;
@@ -1158,20 +1154,6 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
 	if (ret < 0)
 		return ret;
 
-	if (pcie->cfg->pipe_clk_need_muxing) {
-		res->pipe_clk_src = devm_clk_get(dev, "pipe_mux");
-		if (IS_ERR(res->pipe_clk_src))
-			return PTR_ERR(res->pipe_clk_src);
-
-		res->phy_pipe_clk = devm_clk_get(dev, "phy_pipe");
-		if (IS_ERR(res->phy_pipe_clk))
-			return PTR_ERR(res->phy_pipe_clk);
-
-		res->ref_clk_src = devm_clk_get(dev, "ref");
-		if (IS_ERR(res->ref_clk_src))
-			return PTR_ERR(res->ref_clk_src);
-	}
-
 	return 0;
 }
 
@@ -1189,10 +1171,6 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
 		return ret;
 	}
 
-	/* Set TCXO as clock source for pcie_pipe_clk_src */
-	if (pcie->cfg->pipe_clk_need_muxing)
-		clk_set_parent(res->pipe_clk_src, res->ref_clk_src);
-
 	ret = clk_bulk_prepare_enable(res->num_clks, res->clks);
 	if (ret < 0)
 		goto err_disable_regulators;
@@ -1254,18 +1232,8 @@ static void qcom_pcie_deinit_2_7_0(struct qcom_pcie *pcie)
 	struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
 
 	clk_bulk_disable_unprepare(res->num_clks, res->clks);
-	regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
-}
 
-static int qcom_pcie_post_init_2_7_0(struct qcom_pcie *pcie)
-{
-	struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
-
-	/* Set pipe clock as clock source for pcie_pipe_clk_src */
-	if (pcie->cfg->pipe_clk_need_muxing)
-		clk_set_parent(res->pipe_clk_src, res->phy_pipe_clk);
-
-	return 0;
+	regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
 }
 
 static int qcom_pcie_link_up(struct dw_pcie *pci)
@@ -1441,7 +1409,6 @@ static const struct qcom_pcie_ops ops_2_7_0 = {
 	.init = qcom_pcie_init_2_7_0,
 	.deinit = qcom_pcie_deinit_2_7_0,
 	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
-	.post_init = qcom_pcie_post_init_2_7_0,
 };
 
 /* Qcom IP rev.: 1.9.0 */
@@ -1450,7 +1417,6 @@ static const struct qcom_pcie_ops ops_1_9_0 = {
 	.init = qcom_pcie_init_2_7_0,
 	.deinit = qcom_pcie_deinit_2_7_0,
 	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
-	.post_init = qcom_pcie_post_init_2_7_0,
 	.config_sid = qcom_pcie_config_sid_sm8250,
 };
 
@@ -1488,7 +1454,6 @@ static const struct qcom_pcie_cfg sm8250_cfg = {
 static const struct qcom_pcie_cfg sm8450_pcie0_cfg = {
 	.ops = &ops_1_9_0,
 	.has_ddrss_sf_tbu_clk = true,
-	.pipe_clk_need_muxing = true,
 	.has_aggre0_clk = true,
 	.has_aggre1_clk = true,
 };
@@ -1496,14 +1461,12 @@ static const struct qcom_pcie_cfg sm8450_pcie0_cfg = {
 static const struct qcom_pcie_cfg sm8450_pcie1_cfg = {
 	.ops = &ops_1_9_0,
 	.has_ddrss_sf_tbu_clk = true,
-	.pipe_clk_need_muxing = true,
 	.has_aggre1_clk = true,
 };
 
 static const struct qcom_pcie_cfg sc7280_cfg = {
 	.ops = &ops_1_9_0,
 	.has_tbu_clk = true,
-	.pipe_clk_need_muxing = true,
 };
 
 static const struct qcom_pcie_cfg sc8180x_cfg = {
-- 
2.35.1

Re: [PATCH v7 8/8] PCI: qcom: Drop manual pipe_clk_src handling

[Johan Hovold]

On Sat, May 21, 2022 at 03:53:43AM +0300, Dmitry Baryshkov wrote:
> Manual reparenting of pipe_clk_src is being replaced with the parking of
> the clock with clk_disable()/clk_enable() in the phy driver. Drop
> redundant code switching of the pipe clock between the PHY clock source
> and the safe bi_tcxo.
> 
> Cc: Prasad Malisetty <quic_pmaliset@quicinc.com>
> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

You forgot to add my Reviewed-by and Tested-by yet again.

Johan

Re: [PATCH v7 0/8] PCI: qcom: Rework pipe_clk/pipe_clk_src handling

[Johan Hovold]

On Sat, May 21, 2022 at 03:53:35AM +0300, Dmitry Baryshkov wrote:
> PCIe pipe clk (and some other clocks) must be parked to the "safe"
> source (bi_tcxo) when corresponding GDSC is turned off and on again.
> Currently this is handcoded in the PCIe driver by reparenting the
> gcc_pipe_N_clk_src clock.
> 
> Instead of doing it manually, follow the approach used by
> clk_rcg2_shared_ops and implement this parking in the enable() and
> disable() clock operations for respective pipe clocks.
> 
> Changes since v7:
>  - Brought back the struct clk_regmap_phy_mux (Johan)
>  - Fixed includes (Stephen)

So this is v8, but Subject still reads v7.

It looks like you also dropped the CLK_SET_RATE_PARENT flags in this
version.

For the series:

Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Reviewed-by: Johan Hovold <johan+linaro@kernel.org>

Johan

Re: [PATCH v7 0/8] PCI: qcom: Rework pipe_clk/pipe_clk_src handling

[Dmitry Baryshkov]

On 23/05/2022 11:54, Johan Hovold wrote:
> On Sat, May 21, 2022 at 03:53:35AM +0300, Dmitry Baryshkov wrote:
>> PCIe pipe clk (and some other clocks) must be parked to the "safe"
>> source (bi_tcxo) when corresponding GDSC is turned off and on again.
>> Currently this is handcoded in the PCIe driver by reparenting the
>> gcc_pipe_N_clk_src clock.
>>
>> Instead of doing it manually, follow the approach used by
>> clk_rcg2_shared_ops and implement this parking in the enable() and
>> disable() clock operations for respective pipe clocks.
>>
>> Changes since v7:
>>   - Brought back the struct clk_regmap_phy_mux (Johan)
>>   - Fixed includes (Stephen)
> 
> So this is v8, but Subject still reads v7.
> 
> It looks like you also dropped the CLK_SET_RATE_PARENT flags in this
> version.

Yes. It was not there originally. And I don't think we really set the 
rate for the pipe clock (and support setting it for the phy's pipe output).

> 
> For the series:
> 
> Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
> Tested-by: Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
> 
> Johan


-- 
With best wishes
Dmitry