[PATCH] dt-bindings: input: use generic node names

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

Devicetree specification expects nodes to have generic names, if
possible, so replace custom ones with something generic.  For gpio-keys,
the more popular format is "key-xxx" instead of "xxx-key", so choose the
first one.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Cc: Andreas Kemnade <andreas@kemnade.info>
---
 .../devicetree/bindings/input/fsl,mpr121-touchkey.yaml        | 4 ++--
 Documentation/devicetree/bindings/input/gpio-keys.yaml        | 4 ++--
 Documentation/devicetree/bindings/input/iqs269a.yaml          | 2 +-
 Documentation/devicetree/bindings/input/iqs626a.yaml          | 2 +-
 .../devicetree/bindings/input/microchip,cap11xx.yaml          | 2 +-
 5 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml
index 878464f128dc..5139af287d3e 100644
--- a/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml
+++ b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml
@@ -57,7 +57,7 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
 
-        mpr121@5a {
+        touchkey@5a {
             compatible = "fsl,mpr121-touchkey";
             reg = <0x5a>;
             interrupt-parent = <&gpio1>;
@@ -77,7 +77,7 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
 
-        mpr121@5a {
+        touchkey@5a {
             compatible = "fsl,mpr121-touchkey";
             reg = <0x5a>;
             poll-interval = <20>;
diff --git a/Documentation/devicetree/bindings/input/gpio-keys.yaml b/Documentation/devicetree/bindings/input/gpio-keys.yaml
index 7fe1966ea28a..93f601c58984 100644
--- a/Documentation/devicetree/bindings/input/gpio-keys.yaml
+++ b/Documentation/devicetree/bindings/input/gpio-keys.yaml
@@ -127,13 +127,13 @@ examples:
         compatible = "gpio-keys";
         autorepeat;
 
-        up {
+        key-up {
             label = "GPIO Key UP";
             linux,code = <103>;
             gpios = <&gpio1 0 1>;
         };
 
-        down {
+        key-down {
             label = "GPIO Key DOWN";
             linux,code = <108>;
             interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
diff --git a/Documentation/devicetree/bindings/input/iqs269a.yaml b/Documentation/devicetree/bindings/input/iqs269a.yaml
index 9c154e5e1a91..d84d69f5455d 100644
--- a/Documentation/devicetree/bindings/input/iqs269a.yaml
+++ b/Documentation/devicetree/bindings/input/iqs269a.yaml
@@ -475,7 +475,7 @@ examples:
             #address-cells = <1>;
             #size-cells = <0>;
 
-            iqs269a@44 {
+            touch@44 {
                     #address-cells = <1>;
                     #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/input/iqs626a.yaml b/Documentation/devicetree/bindings/input/iqs626a.yaml
index 0cb736c541c9..dd727befe564 100644
--- a/Documentation/devicetree/bindings/input/iqs626a.yaml
+++ b/Documentation/devicetree/bindings/input/iqs626a.yaml
@@ -751,7 +751,7 @@ examples:
             #address-cells = <1>;
             #size-cells = <0>;
 
-            iqs626a@44 {
+            touch@44 {
                     #address-cells = <1>;
                     #size-cells = <0>;
 
diff --git a/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml b/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
index d5d6bced3148..96358b12f9b2 100644
--- a/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
+++ b/Documentation/devicetree/bindings/input/microchip,cap11xx.yaml
@@ -112,7 +112,7 @@ examples:
       #address-cells = <1>;
       #size-cells = <0>;
 
-      cap1188@28 {
+      touch@28 {
         compatible = "microchip,cap1188";
         interrupt-parent = <&gpio1>;
         interrupts = <0 0>;
-- 
2.34.1