All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tom Rini <trini@konsulko.com>
To: u-boot@lists.denx.de
Subject: [PATCH 14/20] Convert CONFIG_SYS_SPL_ARGS_ADDR to Kconfig
Date: Sun, 29 May 2022 12:55:15 -0400	[thread overview]
Message-ID: <20220529165521.912054-14-trini@konsulko.com> (raw)
In-Reply-To: <20220529165521.912054-1-trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_SYS_SPL_ARGS_ADDR

In doing so, we also consistently use this variable for SPL_OS_BOOT and
not CONFIG_SYS_FDT_BASE in some cases.

Signed-off-by: Tom Rini <trini@konsulko.com>
---
 common/spl/Kconfig                                        | 8 ++++++++
 common/spl/spl_nor.c                                      | 4 ++--
 common/spl/spl_xip.c                                      | 2 +-
 configs/am3517_evm_defconfig                              | 1 +
 ...avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig | 1 +
 configs/devkit8000_defconfig                              | 1 +
 configs/display5_defconfig                                | 1 +
 configs/display5_factory_defconfig                        | 1 +
 configs/gwventana_emmc_defconfig                          | 1 +
 configs/gwventana_gw5904_defconfig                        | 1 +
 configs/gwventana_nand_defconfig                          | 1 +
 configs/igep00x0_defconfig                                | 1 +
 configs/imx28_xea_defconfig                               | 1 +
 configs/imx28_xea_sb_defconfig                            | 1 -
 configs/imx6dl_mamoj_defconfig                            | 1 +
 configs/imx6q_logic_defconfig                             | 1 +
 configs/imx6qdl_icore_mipi_defconfig                      | 1 +
 configs/imx6qdl_icore_mmc_defconfig                       | 1 +
 configs/imx6qdl_icore_rqs_defconfig                       | 1 +
 configs/ls1046ardb_qspi_spl_defconfig                     | 1 +
 configs/mccmon6_nor_defconfig                             | 1 +
 configs/microblaze-generic_defconfig                      | 1 +
 configs/omap35_logic_defconfig                            | 1 +
 configs/omap35_logic_somlv_defconfig                      | 1 +
 configs/omap3_logic_defconfig                             | 1 +
 configs/omap3_logic_somlv_defconfig                       | 1 +
 configs/riotboard_defconfig                               | 1 +
 configs/stm32746g-eval_spl_defconfig                      | 1 +
 configs/stm32f746-disco_spl_defconfig                     | 1 +
 configs/stm32f769-disco_spl_defconfig                     | 1 +
 configs/syzygy_hub_defconfig                              | 1 +
 configs/vyasa-rk3288_defconfig                            | 1 +
 configs/xilinx_zynq_virt_defconfig                        | 1 +
 configs/xilinx_zynqmp_virt_defconfig                      | 1 +
 include/configs/am43xx_evm.h                              | 2 --
 include/configs/brppt1.h                                  | 2 --
 include/configs/cm_t43.h                                  | 1 -
 include/configs/devkit8000.h                              | 3 ---
 include/configs/display5.h                                | 1 -
 include/configs/embestmx6boards.h                         | 1 -
 include/configs/gw_ventana.h                              | 1 -
 include/configs/imx6-engicam.h                            | 2 --
 include/configs/imx6_logic.h                              | 1 -
 include/configs/imx6dl-mamoj.h                            | 1 -
 include/configs/ls1043ardb.h                              | 1 -
 include/configs/ls1046ardb.h                              | 1 -
 include/configs/mccmon6.h                                 | 1 -
 include/configs/microblaze-generic.h                      | 7 -------
 include/configs/mt7629.h                                  | 1 -
 include/configs/mx6sabreauto.h                            | 2 --
 include/configs/mx6sabresd.h                              | 1 -
 include/configs/pico-imx6.h                               | 1 -
 include/configs/pico-imx6ul.h                             | 1 -
 include/configs/pico-imx7d.h                              | 1 -
 include/configs/sama5d3_xplained.h                        | 1 -
 include/configs/stm32f746-disco.h                         | 4 ----
 include/configs/ti_am335x_common.h                        | 2 --
 include/configs/ti_omap3_common.h                         | 2 --
 include/configs/ti_omap4_common.h                         | 2 --
 include/configs/ti_omap5_common.h                         | 3 ---
 include/configs/trats.h                                   | 1 -
 include/configs/vyasa-rk3288.h                            | 1 -
 include/configs/xea.h                                     | 2 --
 include/configs/xilinx_zynqmp.h                           | 1 -
 include/configs/zynq-common.h                             | 1 -
 65 files changed, 41 insertions(+), 56 deletions(-)

diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index dfbda1befb58..71b2600df586 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -1188,6 +1188,14 @@ config SPL_OS_BOOT
 	  Enable booting directly to an OS from SPL.
 	  for more info read doc/README.falcon
 
+config SYS_SPL_ARGS_ADDR
+	hex "Address in memory to load 'args' file for Falcon Mode to"
+	depends on SPL_OS_BOOT
+	default 0x88000000 if ARCH_OMAP2PLUS
+	help
+	  Address in memory where the 'args' file, typically a device tree
+	  will be loaded in to memory.
+
 if SPL_OS_BOOT
 config SYS_OS_BASE
 	hex "addr, where OS is found"
diff --git a/common/spl/spl_nor.c b/common/spl/spl_nor.c
index 067a2d42bbf8..7986e930d28b 100644
--- a/common/spl/spl_nor.c
+++ b/common/spl/spl_nor.c
@@ -74,8 +74,8 @@ static int spl_nor_load_image(struct spl_image_info *spl_image,
 			       (void *)(CONFIG_SYS_OS_BASE +
 					sizeof(struct image_header)),
 			       spl_image->size);
-#ifdef CONFIG_SYS_FDT_BASE
-			spl_image->arg = (void *)CONFIG_SYS_FDT_BASE;
+#ifdef CONFIG_SYS_SPL_ARGS_ADDR
+			spl_image->arg = (void *)CONFIG_SYS_SPL_ARGS_ADDR;
 #endif
 
 			return 0;
diff --git a/common/spl/spl_xip.c b/common/spl/spl_xip.c
index 33863fe7d454..e9a40b0ec797 100644
--- a/common/spl/spl_xip.c
+++ b/common/spl/spl_xip.c
@@ -14,7 +14,7 @@ static int spl_xip(struct spl_image_info *spl_image,
 {
 #if CONFIG_IS_ENABLED(OS_BOOT)
 	if (!spl_start_uboot()) {
-		spl_image->arg = (void *)CONFIG_SYS_FDT_BASE;
+		spl_image->arg = (void *)CONFIG_SYS_SPL_ARGS_ADDR;
 		spl_image->name = "Linux";
 		spl_image->os = IH_OS_LINUX;
 		spl_image->load_addr = CONFIG_SYS_LOAD_ADDR;
diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig
index 03fc4fba8f56..05ee3570fc93 100644
--- a/configs/am3517_evm_defconfig
+++ b/configs/am3517_evm_defconfig
@@ -31,6 +31,7 @@ CONFIG_SPL_NAND_ECC=y
 CONFIG_SPL_NAND_SIMPLE=y
 CONFIG_SPL_NAND_BASE=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0x84000000
 CONFIG_SPL_FALCON_BOOT_MMCSD=y
 CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700
 # CONFIG_SPL_POWER is not set
diff --git a/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig b/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig
index 7f4c804c957b..450b2830e56a 100644
--- a/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig
+++ b/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig
@@ -41,6 +41,7 @@ CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000
 CONFIG_SPL_FS_LOAD_KERNEL_NAME="atf-uboot.ub"
 CONFIG_SPL_FS_LOAD_ARGS_NAME="u-boot.bin"
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0x8000000
 CONFIG_SYS_MAXARGS=64
 CONFIG_SYS_PBSIZE=2073
 CONFIG_CMD_MEMTEST=y
diff --git a/configs/devkit8000_defconfig b/configs/devkit8000_defconfig
index 08c053b4f155..dc07c146bdb2 100644
--- a/configs/devkit8000_defconfig
+++ b/configs/devkit8000_defconfig
@@ -22,6 +22,7 @@ CONFIG_SPL_NAND_ECC=y
 CONFIG_SPL_NAND_SIMPLE=y
 CONFIG_SPL_NAND_BASE=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0x80000100
 CONFIG_SPL_FALCON_BOOT_MMCSD=y
 CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x500
 CONFIG_SYS_MAXARGS=64
diff --git a/configs/display5_defconfig b/configs/display5_defconfig
index 6e74f68f400b..646372c10a3a 100644
--- a/configs/display5_defconfig
+++ b/configs/display5_defconfig
@@ -44,6 +44,7 @@ CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_SAVEENV=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0x18000000
 CONFIG_SPL_FALCON_BOOT_MMCSD=y
 CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x100
 CONFIG_SPL_SPI_LOAD=y
diff --git a/configs/display5_factory_defconfig b/configs/display5_factory_defconfig
index eab9c7c1e867..245122843bce 100644
--- a/configs/display5_factory_defconfig
+++ b/configs/display5_factory_defconfig
@@ -39,6 +39,7 @@ CONFIG_SYS_SPL_MALLOC=y
 CONFIG_SPL_DMA=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0x18000000
 CONFIG_SPL_FALCON_BOOT_MMCSD=y
 CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x100
 CONFIG_SPL_SPI_LOAD=y
diff --git a/configs/gwventana_emmc_defconfig b/configs/gwventana_emmc_defconfig
index ef2ee77c3dc5..a96ed26292a1 100644
--- a/configs/gwventana_emmc_defconfig
+++ b/configs/gwventana_emmc_defconfig
@@ -46,6 +46,7 @@ CONFIG_SPL_FIT_IMAGE_TINY=y
 CONFIG_SPL_DMA=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0x18000000
 CONFIG_SPL_FALCON_BOOT_MMCSD=y
 CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000
 CONFIG_SPL_POWER=y
diff --git a/configs/gwventana_gw5904_defconfig b/configs/gwventana_gw5904_defconfig
index a736b81ad9a6..85bbed23ebc8 100644
--- a/configs/gwventana_gw5904_defconfig
+++ b/configs/gwventana_gw5904_defconfig
@@ -46,6 +46,7 @@ CONFIG_SPL_FIT_IMAGE_TINY=y
 CONFIG_SPL_DMA=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0x18000000
 CONFIG_SPL_FALCON_BOOT_MMCSD=y
 CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000
 CONFIG_SPL_POWER=y
diff --git a/configs/gwventana_nand_defconfig b/configs/gwventana_nand_defconfig
index 5372476f0450..200ecf4a0f93 100644
--- a/configs/gwventana_nand_defconfig
+++ b/configs/gwventana_nand_defconfig
@@ -47,6 +47,7 @@ CONFIG_SPL_DMA=y
 CONFIG_SPL_I2C=y
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0x18000000
 CONFIG_SPL_FALCON_BOOT_MMCSD=y
 CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000
 CONFIG_SPL_POWER=y
diff --git a/configs/igep00x0_defconfig b/configs/igep00x0_defconfig
index b1162e7cdb8d..96f2f9df8160 100644
--- a/configs/igep00x0_defconfig
+++ b/configs/igep00x0_defconfig
@@ -41,6 +41,7 @@ CONFIG_SPL_UBI_LOAD_KERNEL_ID=3
 CONFIG_SPL_UBI_LOAD_ARGS_ID=4
 CONFIG_SPL_ONENAND_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0x84000000
 CONFIG_SPL_FALCON_BOOT_MMCSD=y
 CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700
 CONFIG_SYS_MAXARGS=64
diff --git a/configs/imx28_xea_defconfig b/configs/imx28_xea_defconfig
index f460a01e8cef..37233bafad95 100644
--- a/configs/imx28_xea_defconfig
+++ b/configs/imx28_xea_defconfig
@@ -45,6 +45,7 @@ CONFIG_SPL_DMA=y
 CONFIG_SPL_MMC_TINY=y
 CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0x44000000
 CONFIG_SPL_FALCON_BOOT_MMCSD=y
 CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x800
 CONFIG_SPL_SPI_LOAD=y
diff --git a/configs/imx28_xea_sb_defconfig b/configs/imx28_xea_sb_defconfig
index bad232ceec55..ad478c469bc1 100644
--- a/configs/imx28_xea_sb_defconfig
+++ b/configs/imx28_xea_sb_defconfig
@@ -33,7 +33,6 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0
 CONFIG_SUPPORT_EMMC_BOOT_OVERRIDE_PART_CONFIG=y
 CONFIG_SPL_DMA=y
 CONFIG_SPL_DM_SPI_FLASH=y
-CONFIG_SPL_OS_BOOT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_MAXARGS=32
 CONFIG_CMD_SPL=y
diff --git a/configs/imx6dl_mamoj_defconfig b/configs/imx6dl_mamoj_defconfig
index 7e6e3bb4a3f3..a52ce458f2b3 100644
--- a/configs/imx6dl_mamoj_defconfig
+++ b/configs/imx6dl_mamoj_defconfig
@@ -19,6 +19,7 @@ CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_SYS_SPL_MALLOC=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0x13000000
 CONFIG_SPL_FALCON_BOOT_MMCSD=y
 CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000
 CONFIG_SYS_MAXARGS=32
diff --git a/configs/imx6q_logic_defconfig b/configs/imx6q_logic_defconfig
index 4e665ba42bfd..cc7a6f0aa097 100644
--- a/configs/imx6q_logic_defconfig
+++ b/configs/imx6q_logic_defconfig
@@ -34,6 +34,7 @@ CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img"
 CONFIG_SPL_I2C=y
 CONFIG_SPL_NAND_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0x18000000
 CONFIG_SPL_FALCON_BOOT_MMCSD=y
 CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000
 CONFIG_SPL_USB_HOST=y
diff --git a/configs/imx6qdl_icore_mipi_defconfig b/configs/imx6qdl_icore_mipi_defconfig
index 754537044a30..929d31722b72 100644
--- a/configs/imx6qdl_icore_mipi_defconfig
+++ b/configs/imx6qdl_icore_mipi_defconfig
@@ -35,6 +35,7 @@ CONFIG_BOOTCOMMAND="run $modeboot"
 CONFIG_SPL_RAW_IMAGE_SUPPORT=y
 CONFIG_SYS_SPL_MALLOC=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0x18000000
 CONFIG_SPL_FALCON_BOOT_MMCSD=y
 CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000
 CONFIG_SPL_WATCHDOG=y
diff --git a/configs/imx6qdl_icore_mmc_defconfig b/configs/imx6qdl_icore_mmc_defconfig
index 4e9fadd699a5..3465e1915c2a 100644
--- a/configs/imx6qdl_icore_mmc_defconfig
+++ b/configs/imx6qdl_icore_mmc_defconfig
@@ -38,6 +38,7 @@ CONFIG_BOOTCOMMAND="run $modeboot"
 CONFIG_SPL_RAW_IMAGE_SUPPORT=y
 CONFIG_SYS_SPL_MALLOC=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0x18000000
 CONFIG_SPL_FALCON_BOOT_MMCSD=y
 CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000
 CONFIG_SPL_WATCHDOG=y
diff --git a/configs/imx6qdl_icore_rqs_defconfig b/configs/imx6qdl_icore_rqs_defconfig
index d87a47700cde..b2ca3ee1b650 100644
--- a/configs/imx6qdl_icore_rqs_defconfig
+++ b/configs/imx6qdl_icore_rqs_defconfig
@@ -32,6 +32,7 @@ CONFIG_BOOTCOMMAND="run $modeboot"
 CONFIG_SPL_RAW_IMAGE_SUPPORT=y
 CONFIG_SYS_SPL_MALLOC=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0x18000000
 CONFIG_SPL_FALCON_BOOT_MMCSD=y
 CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000
 CONFIG_SPL_WATCHDOG=y
diff --git a/configs/ls1046ardb_qspi_spl_defconfig b/configs/ls1046ardb_qspi_spl_defconfig
index 2f6b546a2600..799d460f2bd4 100644
--- a/configs/ls1046ardb_qspi_spl_defconfig
+++ b/configs/ls1046ardb_qspi_spl_defconfig
@@ -56,6 +56,7 @@ CONFIG_SPL_I2C=y
 CONFIG_SPL_MPC8XXX_INIT_DDR=y
 CONFIG_SPL_NOR_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0x90000000
 CONFIG_SYS_OS_BASE=0x40980000
 CONFIG_SPL_WATCHDOG=y
 CONFIG_SPL_TARGET="spl/u-boot-spl.pbl"
diff --git a/configs/mccmon6_nor_defconfig b/configs/mccmon6_nor_defconfig
index 1214163af392..80b59cbb053b 100644
--- a/configs/mccmon6_nor_defconfig
+++ b/configs/mccmon6_nor_defconfig
@@ -29,6 +29,7 @@ CONFIG_SPL_FIT_IMAGE_TINY=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_NOR_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0x18000000
 CONFIG_SYS_OS_BASE=0x8180000
 CONFIG_SYS_MAXARGS=32
 CONFIG_SYS_PBSIZE=532
diff --git a/configs/microblaze-generic_defconfig b/configs/microblaze-generic_defconfig
index 86bda86b72f2..8ece12630fb2 100644
--- a/configs/microblaze-generic_defconfig
+++ b/configs/microblaze-generic_defconfig
@@ -32,6 +32,7 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_STACK=0x100000
 CONFIG_SPL_NOR_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0x2a000000
 CONFIG_SYS_OS_BASE=0x2c060000
 CONFIG_SYS_PROMPT="U-Boot-mONStR> "
 CONFIG_SYS_MAXARGS=15
diff --git a/configs/omap35_logic_defconfig b/configs/omap35_logic_defconfig
index e5fcba8caf17..6efc50fdf5e9 100644
--- a/configs/omap35_logic_defconfig
+++ b/configs/omap35_logic_defconfig
@@ -35,6 +35,7 @@ CONFIG_SPL_NAND_ECC=y
 CONFIG_SPL_NAND_SIMPLE=y
 CONFIG_SPL_NAND_BASE=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0x84000000
 CONFIG_SPL_FALCON_BOOT_MMCSD=y
 CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700
 CONFIG_SYS_PROMPT="OMAP Logic # "
diff --git a/configs/omap35_logic_somlv_defconfig b/configs/omap35_logic_somlv_defconfig
index 45aee91b3722..3ea4d7a724ef 100644
--- a/configs/omap35_logic_somlv_defconfig
+++ b/configs/omap35_logic_somlv_defconfig
@@ -36,6 +36,7 @@ CONFIG_SPL_NAND_ECC=y
 CONFIG_SPL_NAND_SIMPLE=y
 CONFIG_SPL_NAND_BASE=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0x84000000
 CONFIG_SPL_FALCON_BOOT_MMCSD=y
 CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700
 # CONFIG_SPL_POWER is not set
diff --git a/configs/omap3_logic_defconfig b/configs/omap3_logic_defconfig
index 9b2a8064449c..5c7d30d66ed0 100644
--- a/configs/omap3_logic_defconfig
+++ b/configs/omap3_logic_defconfig
@@ -34,6 +34,7 @@ CONFIG_SPL_NAND_ECC=y
 CONFIG_SPL_NAND_SIMPLE=y
 CONFIG_SPL_NAND_BASE=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0x84000000
 CONFIG_SPL_FALCON_BOOT_MMCSD=y
 CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700
 CONFIG_SYS_PROMPT="OMAP Logic # "
diff --git a/configs/omap3_logic_somlv_defconfig b/configs/omap3_logic_somlv_defconfig
index ee36800d6471..9961e005a07a 100644
--- a/configs/omap3_logic_somlv_defconfig
+++ b/configs/omap3_logic_somlv_defconfig
@@ -36,6 +36,7 @@ CONFIG_SPL_NAND_ECC=y
 CONFIG_SPL_NAND_SIMPLE=y
 CONFIG_SPL_NAND_BASE=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0x84000000
 CONFIG_SPL_FALCON_BOOT_MMCSD=y
 CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700
 # CONFIG_SPL_POWER is not set
diff --git a/configs/riotboard_defconfig b/configs/riotboard_defconfig
index 8fe264d75435..924254cbb978 100644
--- a/configs/riotboard_defconfig
+++ b/configs/riotboard_defconfig
@@ -33,6 +33,7 @@ CONFIG_SPL_FS_EXT4=y
 CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img"
 CONFIG_SPL_FS_LOAD_ARGS_NAME="imx6dl-riotboard.dtb"
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0x13000000
 CONFIG_SPL_FALCON_BOOT_MMCSD=y
 CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x0
 CONFIG_SYS_MAXARGS=32
diff --git a/configs/stm32746g-eval_spl_defconfig b/configs/stm32746g-eval_spl_defconfig
index 989bc7af3015..55e44f863c1c 100644
--- a/configs/stm32746g-eval_spl_defconfig
+++ b/configs/stm32746g-eval_spl_defconfig
@@ -34,6 +34,7 @@ CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_MTD_SUPPORT=y
 CONFIG_SPL_XIP_SUPPORT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0x81c0000
 CONFIG_SPL_DM_RESET=y
 CONFIG_SYS_PROMPT="U-Boot > "
 CONFIG_SYS_PBSIZE=1050
diff --git a/configs/stm32f746-disco_spl_defconfig b/configs/stm32f746-disco_spl_defconfig
index 3aaf7d351218..c174984b939d 100644
--- a/configs/stm32f746-disco_spl_defconfig
+++ b/configs/stm32f746-disco_spl_defconfig
@@ -34,6 +34,7 @@ CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_MTD_SUPPORT=y
 CONFIG_SPL_XIP_SUPPORT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0x81c0000
 CONFIG_SPL_DM_RESET=y
 CONFIG_SYS_PROMPT="U-Boot > "
 CONFIG_SYS_PBSIZE=1050
diff --git a/configs/stm32f769-disco_spl_defconfig b/configs/stm32f769-disco_spl_defconfig
index 55ac1174af6a..a5dc89c80273 100644
--- a/configs/stm32f769-disco_spl_defconfig
+++ b/configs/stm32f769-disco_spl_defconfig
@@ -33,6 +33,7 @@ CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_MTD_SUPPORT=y
 CONFIG_SPL_XIP_SUPPORT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0x81c0000
 CONFIG_SPL_DM_RESET=y
 CONFIG_SYS_PROMPT="U-Boot > "
 CONFIG_SYS_PBSIZE=1050
diff --git a/configs/syzygy_hub_defconfig b/configs/syzygy_hub_defconfig
index 0baf6dd886ac..d632cb86a258 100644
--- a/configs/syzygy_hub_defconfig
+++ b/configs/syzygy_hub_defconfig
@@ -36,6 +36,7 @@ CONFIG_SYS_SPL_MALLOC=y
 CONFIG_SYS_SPL_MALLOC_SIZE=0x2000000
 CONFIG_SPL_FS_LOAD_ARGS_NAME="system.dtb"
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0x10000000
 CONFIG_SPL_FALCON_BOOT_MMCSD=y
 CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x0
 CONFIG_SYS_MAXARGS=32
diff --git a/configs/vyasa-rk3288_defconfig b/configs/vyasa-rk3288_defconfig
index 27c704f8a225..9ae73816246a 100644
--- a/configs/vyasa-rk3288_defconfig
+++ b/configs/vyasa-rk3288_defconfig
@@ -29,6 +29,7 @@ CONFIG_SPL_STACK=0xff718000
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0xffe5000
 CONFIG_SPL_FALCON_BOOT_MMCSD=y
 CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x8800
 CONFIG_CMD_SPL=y
diff --git a/configs/xilinx_zynq_virt_defconfig b/configs/xilinx_zynq_virt_defconfig
index a5cee103cb34..92ef35c64751 100644
--- a/configs/xilinx_zynq_virt_defconfig
+++ b/configs/xilinx_zynq_virt_defconfig
@@ -41,6 +41,7 @@ CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
 CONFIG_SPL_FS_LOAD_ARGS_NAME="system.dtb"
 CONFIG_SPL_FPGA=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0x10000000
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000
 CONFIG_SYS_MAXARGS=32
diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig
index 0ac75f6572f4..7f0ed8bc2250 100644
--- a/configs/xilinx_zynqmp_virt_defconfig
+++ b/configs/xilinx_zynqmp_virt_defconfig
@@ -46,6 +46,7 @@ CONFIG_SPL_FS_LOAD_KERNEL_NAME="atf-uboot.ub"
 CONFIG_SPL_FS_LOAD_ARGS_NAME="u-boot.bin"
 CONFIG_SPL_FPGA=y
 CONFIG_SPL_OS_BOOT=y
+CONFIG_SYS_SPL_ARGS_ADDR=0x8000000
 CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_SPI_LOAD=y
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 5057441f7506..bce035531ce6 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -27,8 +27,6 @@
 #define CONFIG_POWER_TPS62362
 
 /* SPL defines. */
-#define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + \
-					 (128 << 20))
 
 /* Enabling L2 Cache */
 #define CONFIG_SYS_L2_PL310
diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h
index 769b3f073acc..b98d4ab68ad2 100644
--- a/include/configs/brppt1.h
+++ b/include/configs/brppt1.h
@@ -29,8 +29,6 @@
  */
 
 #ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_SYS_SPL_ARGS_ADDR		0x80F80000
-
 /* RAW SD card / eMMC */
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x80	/* address 0x10000 */
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	0x80	/* 64KiB */
diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h
index eb015e1b20f2..ec1355b8a320 100644
--- a/include/configs/cm_t43.h
+++ b/include/configs/cm_t43.h
@@ -76,7 +76,6 @@
 		"bootz ${loadaddr} - ${fdtaddr}\0"
 
 /* SPL defines. */
-#define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + (128 << 20))
 #define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
 
 /* EEPROM */
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 340c9d0d4a30..2a3daea9f253 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -124,7 +124,4 @@
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x8   /* address 0x1000 */
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	8     /* 4KB */
 
-#undef CONFIG_SYS_SPL_ARGS_ADDR
-#define CONFIG_SYS_SPL_ARGS_ADDR        (PHYS_SDRAM_1 + 0x100)
-
 #endif /* __CONFIG_H */
diff --git a/include/configs/display5.h b/include/configs/display5.h
index d7fbfbd702e1..420b0c9f6e43 100644
--- a/include/configs/display5.h
+++ b/include/configs/display5.h
@@ -10,7 +10,6 @@
 #include "mx6_common.h"
 
 /* Falcon Mode */
-#define CONFIG_SYS_SPL_ARGS_ADDR	0x18000000
 
 /* Falcon Mode - MMC support */
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x3F00
diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h
index 21b436bdb4cd..3023d0e0b25b 100644
--- a/include/configs/embestmx6boards.h
+++ b/include/configs/embestmx6boards.h
@@ -53,7 +53,6 @@
 #ifdef CONFIG_SPL
 #include "imx6_spl.h"
 /* RiOTboard */
-#define CONFIG_SYS_SPL_ARGS_ADDR 0x13000000
 
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR  0 /* offset 69KB */
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0 /* offset 69KB */
diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
index cc6909774ed1..2e6b9523f45b 100644
--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -10,7 +10,6 @@
 /* Location in NAND to read U-Boot from */
 
 /* Falcon Mode */
-#define CONFIG_SYS_SPL_ARGS_ADDR	0x18000000
 
 /* Falcon Mode - NAND support: args@17MB kernel@18MB */
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	(18 * SZ_1M)
diff --git a/include/configs/imx6-engicam.h b/include/configs/imx6-engicam.h
index 2a794db4dffd..4a1eae1d8b9b 100644
--- a/include/configs/imx6-engicam.h
+++ b/include/configs/imx6-engicam.h
@@ -135,8 +135,6 @@
 
 /* Falcon Mode */
 #ifdef CONFIG_SPL_OS_BOOT
-# define CONFIG_SYS_SPL_ARGS_ADDR	0x18000000
-
 /* MMC support: args@1MB kernel@2MB */
 # define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR		0x800   /* 1MB */
 # define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS		(CONFIG_CMD_SPL_WRITE_SIZE / 512)
diff --git a/include/configs/imx6_logic.h b/include/configs/imx6_logic.h
index a8d691586c95..324016a53b24 100644
--- a/include/configs/imx6_logic.h
+++ b/include/configs/imx6_logic.h
@@ -130,7 +130,6 @@
 #endif
 
 /* Falcon Mode */
-#define CONFIG_SYS_SPL_ARGS_ADDR       0x18000000
 
 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR  0x800   /* 1MB */
diff --git a/include/configs/imx6dl-mamoj.h b/include/configs/imx6dl-mamoj.h
index 437893238991..00c30d4d5026 100644
--- a/include/configs/imx6dl-mamoj.h
+++ b/include/configs/imx6dl-mamoj.h
@@ -51,7 +51,6 @@
 #define CONFIG_USB_MAX_CONTROLLER_COUNT		2
 
 /* Falcon */
-#define CONFIG_SYS_SPL_ARGS_ADDR	0x13000000
 
 /* MMC support: args@1MB kernel@2MB */
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR		0x800   /* 1MB */
diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index 16815f4fb00a..bf8738f22a72 100644
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -20,7 +20,6 @@
 #endif
 
 #ifdef CONFIG_SD_BOOT
-#define CONFIG_SYS_SPL_ARGS_ADDR	0x90000000
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x500
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	30
 #endif
diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h
index ff76e6945673..4ad62b43f8c9 100644
--- a/include/configs/ls1046ardb.h
+++ b/include/configs/ls1046ardb.h
@@ -20,7 +20,6 @@
 
 #if defined(CONFIG_QSPI_BOOT)
 #define CONFIG_SYS_UBOOT_BASE		0x40100000
-#define CONFIG_SYS_SPL_ARGS_ADDR	0x90000000
 #endif
 
 #define CONFIG_SYS_NAND_BASE		0x7e800000
diff --git a/include/configs/mccmon6.h b/include/configs/mccmon6.h
index ea7823de5a7d..2bbbdfa51f84 100644
--- a/include/configs/mccmon6.h
+++ b/include/configs/mccmon6.h
@@ -12,7 +12,6 @@
 #include "imx6_spl.h"
 
 #define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + 0x80000)
-#define CONFIG_SYS_SPL_ARGS_ADDR	0x18000000
 
 /*
  * Below defines are set but NOT really used since we by
diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index 389da112b939..2adc1f6d86b8 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -115,13 +115,6 @@
 
 #define CONFIG_SYS_UBOOT_BASE		CONFIG_SYS_TEXT_BASE
 
-/* for booting directly linux */
-#define CONFIG_SYS_FDT_BASE		(CONFIG_SYS_TEXT_BASE + \
-					0x40000)
-
-#define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_TEXT_BASE + \
-					 0x1000000)
-
 /* SP location before relocation, must use scratch RAM */
 /* BRAM start */
 #define CONFIG_SYS_INIT_RAM_ADDR	0x0
diff --git a/include/configs/mt7629.h b/include/configs/mt7629.h
index 246836a077b9..87e2251777cb 100644
--- a/include/configs/mt7629.h
+++ b/include/configs/mt7629.h
@@ -27,7 +27,6 @@
 /* SPL -> Uboot */
 
 /* UBoot -> Kernel */
-#define CONFIG_SYS_SPL_ARGS_ADDR	0x40000000
 
 /* DRAM */
 #define CONFIG_SYS_SDRAM_BASE		0x40000000
diff --git a/include/configs/mx6sabreauto.h b/include/configs/mx6sabreauto.h
index 00ca50a4e647..04f8a16fde98 100644
--- a/include/configs/mx6sabreauto.h
+++ b/include/configs/mx6sabreauto.h
@@ -28,8 +28,6 @@
 
 /* Falcon Mode */
 #ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_SYS_SPL_ARGS_ADDR       0x18000000
-
 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR  0x800   /* 1MB */
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h
index c78ddc42568c..436254027006 100644
--- a/include/configs/mx6sabresd.h
+++ b/include/configs/mx6sabresd.h
@@ -18,7 +18,6 @@
 #include "mx6sabre_common.h"
 
 /* Falcon Mode */
-#define CONFIG_SYS_SPL_ARGS_ADDR       0x18000000
 
 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR  0x800   /* 1MB */
diff --git a/include/configs/pico-imx6.h b/include/configs/pico-imx6.h
index 4910c80e3250..571a233c302d 100644
--- a/include/configs/pico-imx6.h
+++ b/include/configs/pico-imx6.h
@@ -14,7 +14,6 @@
 
 #ifdef CONFIG_SPL_OS_BOOT
 /* Falcon Mode */
-#define CONFIG_SYS_SPL_ARGS_ADDR   0x18000000
 
 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR  0x800   /* 1MB */
diff --git a/include/configs/pico-imx6ul.h b/include/configs/pico-imx6ul.h
index eef148419034..3e0cedadc32d 100644
--- a/include/configs/pico-imx6ul.h
+++ b/include/configs/pico-imx6ul.h
@@ -16,7 +16,6 @@
 
 #ifdef CONFIG_SPL_OS_BOOT
 /* Falcon Mode */
-#define CONFIG_SYS_SPL_ARGS_ADDR   0x88000000
 
 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR  0x800   /* 1MB */
diff --git a/include/configs/pico-imx7d.h b/include/configs/pico-imx7d.h
index 482238b41948..a293dca64212 100644
--- a/include/configs/pico-imx7d.h
+++ b/include/configs/pico-imx7d.h
@@ -14,7 +14,6 @@
 
 #ifdef CONFIG_SPL_OS_BOOT
 /* Falcon Mode */
-#define CONFIG_SYS_SPL_ARGS_ADDR	0x88000000
 
 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR  0x800   /* 1MB */
diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h
index b4590a2ea912..073520bd5e5f 100644
--- a/include/configs/sama5d3_xplained.h
+++ b/include/configs/sama5d3_xplained.h
@@ -57,7 +57,6 @@
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x100  /* 128 KiB */
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	(CONFIG_CMD_SPL_WRITE_SIZE / 512)
 /* U-Boot proper stored by default at 0x200 (256 KiB) */
-#define CONFIG_SYS_SPL_ARGS_ADDR		0x22000000
 
 /* Falcon boot support on FAT on MMC */
 
diff --git a/include/configs/stm32f746-disco.h b/include/configs/stm32f746-disco.h
index 80db425bb7ce..05ac900f3c31 100644
--- a/include/configs/stm32f746-disco.h
+++ b/include/configs/stm32f746-disco.h
@@ -43,10 +43,6 @@
 #define CONFIG_SYS_UBOOT_BASE		(CONFIG_SYS_FLASH_BASE + \
 					 CONFIG_SPL_PAD_TO)
 
-/* DT blob (fdt) address */
-#define CONFIG_SYS_FDT_BASE		(CONFIG_SYS_FLASH_BASE + \
-					0x1C0000)
-
 /* For splashcreen */
 
 #endif /* __CONFIG_H */
diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h
index f8bd5558e56a..5d5df6b10191 100644
--- a/include/configs/ti_am335x_common.h
+++ b/include/configs/ti_am335x_common.h
@@ -32,8 +32,6 @@
  * supports X-MODEM loading via UART, and we leverage this and then use
  * Y-MODEM to load u-boot.img, when booted over UART.
  */
-#define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + \
-					 (128 << 20))
 
 /* Enable the watchdog inside of SPL */
 
diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h
index 3d7cb175faa6..725a5a62f525 100644
--- a/include/configs/ti_omap3_common.h
+++ b/include/configs/ti_omap3_common.h
@@ -55,8 +55,6 @@
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)
 
 /* SPL */
-#define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + \
-					 (64 << 20))
 
 #ifdef CONFIG_MTD_RAW_NAND
 #define CONFIG_SYS_NAND_BASE		0x30000000
diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h
index b5ccfdcc6d46..5d8c45af2fa0 100644
--- a/include/configs/ti_omap4_common.h
+++ b/include/configs/ti_omap4_common.h
@@ -113,8 +113,6 @@
  * SPL is overlapped with public stack and breaking non HS devices to boot.
  * So moving TEXT_BASE down to non-HS limit.
  */
-#define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + \
-					 (128 << 20))
 
 #ifdef CONFIG_SPL_BUILD
 /* No need for i2c in SPL mode as we will use SRI2C for PMIC access on OMAP4 */
diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h
index 714a1c55c7fb..f7f17d0f502c 100644
--- a/include/configs/ti_omap5_common.h
+++ b/include/configs/ti_omap5_common.h
@@ -305,7 +305,4 @@
  */
 #endif
 
-#define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + \
-					 (128 << 20))
-
 #endif /* __CONFIG_TI_OMAP5_COMMON_H */
diff --git a/include/configs/trats.h b/include/configs/trats.h
index 6ed1c79c89e0..db33560f0db4 100644
--- a/include/configs/trats.h
+++ b/include/configs/trats.h
@@ -127,7 +127,6 @@
 	"fdtaddr=40800000\0" \
 
 /* Falcon mode definitions */
-#define CONFIG_SYS_SPL_ARGS_ADDR        CONFIG_SYS_SDRAM_BASE + 0x100
 
 /* GPT */
 
diff --git a/include/configs/vyasa-rk3288.h b/include/configs/vyasa-rk3288.h
index fb76e5544ac3..d0e017f44821 100644
--- a/include/configs/vyasa-rk3288.h
+++ b/include/configs/vyasa-rk3288.h
@@ -22,7 +22,6 @@
 
 #ifndef CONFIG_TPL_BUILD
 /* Falcon Mode */
-#define CONFIG_SYS_SPL_ARGS_ADDR	0x0ffe5000
 
 /* Falcon Mode - MMC support: args@16MB kernel@17MB */
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR		0x8000	/* 16MB */
diff --git a/include/configs/xea.h b/include/configs/xea.h
index 07419f0afbbc..b82e6605f823 100644
--- a/include/configs/xea.h
+++ b/include/configs/xea.h
@@ -16,8 +16,6 @@
 
 /* SPL */
 
-#define CONFIG_SYS_SPL_ARGS_ADDR	0x44000000
-
 #define CONFIG_SYS_SPI_KERNEL_OFFS	SZ_1M
 #define CONFIG_SYS_SPI_ARGS_OFFS	SZ_512K
 #define CONFIG_SYS_SPI_ARGS_SIZE	SZ_32K
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 846c49f28e63..d8d9a555338b 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -206,7 +206,6 @@
 #endif
 
 /* u-boot is like dtb */
-#define CONFIG_SYS_SPL_ARGS_ADDR	0x8000000
 
 /* ATF is my kernel image */
 
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index b2b95b710ef4..4d8d44c25d83 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -210,7 +210,6 @@
 #define CONFIG_SYS_MMC_MAX_DEVICE	1
 
 /* Address in RAM where the parameters must be copied by SPL. */
-#define CONFIG_SYS_SPL_ARGS_ADDR	0x10000000
 
 /* Not using MMC raw mode - just for compilation purpose */
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0
-- 
2.25.1


  parent reply	other threads:[~2022-05-29 16:58 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-29 16:55 [PATCH 01/20] Convert CONFIG_SPL_STACK to Kconfig Tom Rini
2022-05-29 16:55 ` [PATCH 02/20] imx6: Update CONFIG_SPL_STACK defaults in Kconfig Tom Rini
2022-05-29 16:55 ` [PATCH 03/20] imx7: " Tom Rini
2022-05-29 16:55 ` [PATCH 04/20] Convert CONFIG_TPL_NAND_INIT to Kconfig Tom Rini
2022-05-29 16:55 ` [PATCH 05/20] Convert CONFIG_SPL_RELOC_TEXT_BASE et al " Tom Rini
2022-05-29 16:55 ` [PATCH 06/20] Convert CONFIG_SPL_BSS_START_ADDR " Tom Rini
2022-05-29 16:55 ` [PATCH 07/20] Convert CONFIG_SYS_SPL_MALLOC_SIZE et al " Tom Rini
2022-05-29 16:55 ` [PATCH 08/20] Remove CONFIG_SYS_SPL_LEN largely Tom Rini
2022-05-29 16:55 ` [PATCH 09/20] etamin: Remove CONFIG_SPL_CMT defines Tom Rini
2022-05-29 16:55 ` [PATCH 10/20] Convert CONFIG_SPL_GD_ADDR to Kconfig Tom Rini
2022-05-29 16:55 ` [PATCH 11/20] Drop CONFIG_SPL_SPI_FLASH_MINIMAL Tom Rini
2022-05-29 16:55 ` [PATCH 12/20] Remove CONFIG_SPL_STACK_SIZE Tom Rini
2022-05-29 16:55 ` [PATCH 13/20] Convert CONFIG_SPL_TARGET to Kconfig Tom Rini
2022-05-29 16:55 ` Tom Rini [this message]
2022-05-29 16:55 ` [PATCH 15/20] ax25-ae350: Move CONFIG_SYS_FDT_BASE " Tom Rini
     [not found]   ` <HK0PR03MB29945ABCCE6928CEB0BA22A5C1DD9@HK0PR03MB2994.apcprd03.prod.outlook.com>
2022-06-02  1:14     ` Rick Chen
2022-05-29 16:55 ` [PATCH 16/20] Drop CONFIG_SPL_SIZE Tom Rini
2022-05-29 16:55 ` [PATCH 17/20] spl: Remove CONFIG_SPL_START_S_PATH and rework the logic behind it Tom Rini
2022-05-29 16:55 ` [PATCH 18/20] Convert CONFIG_SYS_NAND_SPL_KERNEL_OFFS to Kconfig Tom Rini
2022-05-29 16:55 ` [PATCH 19/20] Convert CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR et al " Tom Rini
2022-05-29 16:55 ` [PATCH 20/20] riotboard, syzygy_hub: Disable SPL_FALCON_BOOT_MMCSD Tom Rini
2022-06-06 21:36 ` [PATCH 01/20] Convert CONFIG_SPL_STACK to Kconfig Tom Rini
2024-01-23  3:53 ` Kever Yang
2024-01-23 17:58   ` Tom Rini
2024-01-24  1:15     ` Kever Yang
2024-01-24  1:34       ` Tom Rini
2024-01-24  7:50         ` Kever Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220529165521.912054-14-trini@konsulko.com \
    --to=trini@konsulko.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.