From: Max Fierke <max@maxfierke.com> To: thierry.reding@gmail.com, sam@ravnborg.org, airlied@linux.ie, daniel@ffwll.ch, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Max Fierke <max@maxfierke.com> Subject: [PATCH 2/3] dt-bindings: display: Add bindings for ClockworkPi CWD686 Date: Wed, 1 Jun 2022 00:17:47 -0500 [thread overview] Message-ID: <20220601051748.1305450-3-max@maxfierke.com> (raw) In-Reply-To: <20220601051748.1305450-1-max@maxfierke.com> The CWD686 is a 6.86" IPS LCD panel used as the primary display in the ClockworkPi DevTerm portable (all cores) Signed-off-by: Max Fierke <max@maxfierke.com> --- .../display/panel/clockworkpi,cwd686.yaml | 60 +++++++++++++++++++ 1 file changed, 60 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml diff --git a/Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml b/Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml new file mode 100644 index 000000000000..935a33b9305f --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/clockworkpi,cwd686.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ClockworkPi CWD686 6.86" IPS LCD panel + +maintainers: + - Max Fierke <max@maxfierke.com> + +description: | + The ClockworkPi CWD686 is a 6.86" ICNL9707-based IPS LCD panel used within the + ClockworkPi DevTerm series of portable devices. The panel has a 480x1280 + resolution and uses 24 bit RGB per pixel. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: clockworkpi,cwd686 + + reg: + description: DSI virtual channel used by that screen + maxItems: 1 + + reset-gpios: true + rotation: true + backlight: true + +required: + - compatible + - reg + - backlight + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + backlight: backlight { + compatible = "gpio-backlight"; + gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; + }; + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "clockworkpi,cwd686"; + reg = <0>; + backlight = <&backlight>; + reset-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; + rotation = <90>; + }; + }; -- 2.36.1
WARNING: multiple messages have this Message-ID (diff)
From: Max Fierke <max@maxfierke.com> To: thierry.reding@gmail.com, sam@ravnborg.org, airlied@linux.ie, daniel@ffwll.ch, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org Cc: devicetree@vger.kernel.org, Max Fierke <max@maxfierke.com>, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org Subject: [PATCH 2/3] dt-bindings: display: Add bindings for ClockworkPi CWD686 Date: Wed, 1 Jun 2022 00:17:47 -0500 [thread overview] Message-ID: <20220601051748.1305450-3-max@maxfierke.com> (raw) In-Reply-To: <20220601051748.1305450-1-max@maxfierke.com> The CWD686 is a 6.86" IPS LCD panel used as the primary display in the ClockworkPi DevTerm portable (all cores) Signed-off-by: Max Fierke <max@maxfierke.com> --- .../display/panel/clockworkpi,cwd686.yaml | 60 +++++++++++++++++++ 1 file changed, 60 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml diff --git a/Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml b/Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml new file mode 100644 index 000000000000..935a33b9305f --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/clockworkpi,cwd686.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/clockworkpi,cwd686.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ClockworkPi CWD686 6.86" IPS LCD panel + +maintainers: + - Max Fierke <max@maxfierke.com> + +description: | + The ClockworkPi CWD686 is a 6.86" ICNL9707-based IPS LCD panel used within the + ClockworkPi DevTerm series of portable devices. The panel has a 480x1280 + resolution and uses 24 bit RGB per pixel. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: clockworkpi,cwd686 + + reg: + description: DSI virtual channel used by that screen + maxItems: 1 + + reset-gpios: true + rotation: true + backlight: true + +required: + - compatible + - reg + - backlight + - reset-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + backlight: backlight { + compatible = "gpio-backlight"; + gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; + }; + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "clockworkpi,cwd686"; + reg = <0>; + backlight = <&backlight>; + reset-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; + rotation = <90>; + }; + }; -- 2.36.1
next prev parent reply other threads:[~2022-06-01 5:18 UTC|newest] Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-06-01 5:17 [PATCH 0/3] Introduce ClockworkPi CWD686 DRM panel driver Max Fierke 2022-06-01 5:17 ` Max Fierke 2022-06-01 5:17 ` [PATCH 1/3] dt-bindings: vendor-prefixes: Add prefix for ClockworkPi Max Fierke 2022-06-01 5:17 ` Max Fierke 2022-06-01 7:46 ` Krzysztof Kozlowski 2022-06-01 7:46 ` Krzysztof Kozlowski 2022-06-01 5:17 ` Max Fierke [this message] 2022-06-01 5:17 ` [PATCH 2/3] dt-bindings: display: Add bindings for ClockworkPi CWD686 Max Fierke 2022-06-01 7:49 ` Krzysztof Kozlowski 2022-06-01 7:49 ` Krzysztof Kozlowski 2022-06-01 18:47 ` Rob Herring 2022-06-01 18:47 ` Rob Herring 2022-06-02 3:51 ` Max Fierke 2022-06-02 3:51 ` Max Fierke 2022-06-01 5:17 ` [PATCH 3/3] drm: panel: Add driver for ClockworkPi cwd686 panel Max Fierke 2022-06-01 5:17 ` Max Fierke 2022-06-24 20:57 ` Sam Ravnborg 2022-06-24 20:57 ` Sam Ravnborg
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220601051748.1305450-3-max@maxfierke.com \ --to=max@maxfierke.com \ --cc=airlied@linux.ie \ --cc=daniel@ffwll.ch \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-kernel@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=sam@ravnborg.org \ --cc=thierry.reding@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.