[PATCH v10 0/5] PCI: qcom: Rework pipe_clk/pipe_clk_src handling

[PATCH v10 0/5] PCI: qcom: Rework pipe_clk/pipe_clk_src handling

[Dmitry Baryshkov]

PCIe pipe clk (and some other clocks) must be parked to the "safe"
source (bi_tcxo) when corresponding GDSC is turned off and on again.
Currently this is handcoded in the PCIe driver by reparenting the
gcc_pipe_N_clk_src clock.

Instead of doing it manually, follow the approach used by
clk_rcg2_shared_ops and implement this parking in the enable() and
disable() clock operations for respective pipe clocks.

Changes since v9:
 - Respin fixing Tested-by tags, no code changes

Changes since v8:
 - Readded .name to changed entries in gcc-sc7280 driver to restore
   compatibility with older DTS,
 - Rebased on top of linux-next, dropping reverts,
 - Verified to include all R-b tags (excuse me, Johan, I missed them
   in the previous iteration).

Changes since v7:
 - Brought back the struct clk_regmap_phy_mux (Johan)
 - Fixed includes (Stephen)
 - Dropped CLK_SET_RATE_PARENT flags from changed pipe clocks, they are
   not set in the current code and they are useless as the PHY's clock
   has fixed rate.

Changes since v6:
 - Switched the ops to use GENMASK/FIELD_GET/FIELD_PUT (Stephen),
 - As all pipe/symbol clock source clocks have the same register (and
   parents) layout, hardcode all the values. If the need arises, this
   can be changed later (Stephen),
 - Fixed commit messages and comments (suggested by Johan),
 - Added revert for the clk_regmap_mux_safe that have been already
   picked up by Bjorn.

Changes since v5:
 - Rename the clock to clk-regmap-phy-mux and the enable/disable values
   to phy_src_val and ref_src_val respectively (as recommended by
   Johan).

Changes since v4:
 - Renamed the clock to clk-regmap-pipe-src,
 - Added mention of PCIe2 PHY to the commit message,
 - Expanded commit messages to mention additional pipe clock details.

Changes since v3:
 - Replaced the clock multiplexer implementation with branch-like clock.

Changes since v2:
 - Added is_enabled() callback
 - Added default parent to the pipe clock configuration

Changes since v1:
 - Rebased on top of [1].
 - Removed erroneous Fixes tag from the patch 4.

Changes since RFC:
 - Rework clk-regmap-mux fields. Specify safe parent as P_* value rather
   than specifying the register value directly
 - Expand commit message to the first patch to specially mention that
   it is required only on newer generations of Qualcomm chipsets.

Dmitry Baryshkov (5):
  clk: qcom: regmap: add PHY clock source implementation
  clk: qcom: gcc-sm8450: use new clk_regmap_phy_mux_ops for PCIe pipe
    clocks
  clk: qcom: gcc-sc7280: use new clk_regmap_phy_mux_ops for PCIe pipe
    clocks
  PCI: qcom: Remove unnecessary pipe_clk handling
  PCI: qcom: Drop manual pipe_clk_src handling


Dmitry Baryshkov (5):
  clk: qcom: regmap: add PHY clock source implementation
  clk: qcom: gcc-sm8450: use new clk_regmap_phy_mux_ops for PCIe pipe
    clocks
  clk: qcom: gcc-sc7280: use new clk_regmap_phy_mux_ops for PCIe pipe
    clocks
  PCI: qcom: Remove unnecessary pipe_clk handling
  PCI: qcom: Drop manual pipe_clk_src handling

 drivers/clk/qcom/Makefile              |  1 +
 drivers/clk/qcom/clk-regmap-phy-mux.c  | 62 ++++++++++++++++++++
 drivers/clk/qcom/clk-regmap-phy-mux.h  | 33 +++++++++++
 drivers/clk/qcom/gcc-sc7280.c          | 47 +++++----------
 drivers/clk/qcom/gcc-sm8450.c          | 49 +++++-----------
 drivers/pci/controller/dwc/pcie-qcom.c | 81 +-------------------------
 6 files changed, 125 insertions(+), 148 deletions(-)
 create mode 100644 drivers/clk/qcom/clk-regmap-phy-mux.c
 create mode 100644 drivers/clk/qcom/clk-regmap-phy-mux.h

-- 
2.35.1

[PATCH v10 1/5] clk: qcom: regmap: add PHY clock source implementation

[Dmitry Baryshkov]

On recent Qualcomm platforms the QMP PIPE clocks feed into a set of
muxes which must be parked to the "safe" source (bi_tcxo) when
corresponding GDSC is turned off and on again. Currently this is
handcoded in the PCIe driver by reparenting the gcc_pipe_N_clk_src
clock. However the same code sequence should be applied in the
pcie-qcom endpoint, USB3 and UFS drivers.

Rather than copying this sequence over and over again, follow the
example of clk_rcg2_shared_ops and implement this parking in the
enable() and disable() clock operations. Supplement the regmap-mux with
the new clk_regmap_phy_mux type, which implements such multiplexers
as a simple gate clocks.

This is possible since each of these multiplexers has just two clock
sources: one coming from the PHY and a reference (XO) one.  If the clock
is running off the from-PHY source, report it as enabled. Report it as
disabled otherwise (if it uses reference source).

This way the PHY will disable the pipe clock before turning off the
GDSC, which in turn would lead to disabling corresponding pipe_clk_src
(and thus it being parked to a safe, reference clock source). And vice
versa, after enabling the GDSC the PHY will enable the pipe clock, which
would cause pipe_clk_src to be switched from a safe source to the
working one.

Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/clk/qcom/Makefile             |  1 +
 drivers/clk/qcom/clk-regmap-phy-mux.c | 62 +++++++++++++++++++++++++++
 drivers/clk/qcom/clk-regmap-phy-mux.h | 33 ++++++++++++++
 3 files changed, 96 insertions(+)
 create mode 100644 drivers/clk/qcom/clk-regmap-phy-mux.c
 create mode 100644 drivers/clk/qcom/clk-regmap-phy-mux.h

diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 36789f5233ef..08594230c1c1 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -11,6 +11,7 @@ clk-qcom-y += clk-branch.o
 clk-qcom-y += clk-regmap-divider.o
 clk-qcom-y += clk-regmap-mux.o
 clk-qcom-y += clk-regmap-mux-div.o
+clk-qcom-y += clk-regmap-phy-mux.o
 clk-qcom-$(CONFIG_KRAIT_CLOCKS) += clk-krait.o
 clk-qcom-y += clk-hfpll.o
 clk-qcom-y += reset.o
diff --git a/drivers/clk/qcom/clk-regmap-phy-mux.c b/drivers/clk/qcom/clk-regmap-phy-mux.c
new file mode 100644
index 000000000000..a1adc075b471
--- /dev/null
+++ b/drivers/clk/qcom/clk-regmap-phy-mux.c
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, Linaro Ltd.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/bitops.h>
+#include <linux/regmap.h>
+#include <linux/export.h>
+
+#include "clk-regmap.h"
+#include "clk-regmap-phy-mux.h"
+
+#define PHY_MUX_MASK		GENMASK(1, 0)
+#define PHY_MUX_PHY_SRC		0
+#define PHY_MUX_REF_SRC		2
+
+static inline struct clk_regmap_phy_mux *to_clk_regmap_phy_mux(struct clk_regmap *clkr)
+{
+	return container_of(clkr, struct clk_regmap_phy_mux, clkr);
+}
+
+static int phy_mux_is_enabled(struct clk_hw *hw)
+{
+	struct clk_regmap *clkr = to_clk_regmap(hw);
+	struct clk_regmap_phy_mux *phy_mux = to_clk_regmap_phy_mux(clkr);
+	unsigned int val;
+
+	regmap_read(clkr->regmap, phy_mux->reg, &val);
+	val = FIELD_GET(PHY_MUX_MASK, val);
+
+	WARN_ON(val != PHY_MUX_PHY_SRC && val != PHY_MUX_REF_SRC);
+
+	return val == PHY_MUX_PHY_SRC;
+}
+
+static int phy_mux_enable(struct clk_hw *hw)
+{
+	struct clk_regmap *clkr = to_clk_regmap(hw);
+	struct clk_regmap_phy_mux *phy_mux = to_clk_regmap_phy_mux(clkr);
+
+	return regmap_update_bits(clkr->regmap, phy_mux->reg,
+				  PHY_MUX_MASK,
+				  FIELD_PREP(PHY_MUX_MASK, PHY_MUX_PHY_SRC));
+}
+
+static void phy_mux_disable(struct clk_hw *hw)
+{
+	struct clk_regmap *clkr = to_clk_regmap(hw);
+	struct clk_regmap_phy_mux *phy_mux = to_clk_regmap_phy_mux(clkr);
+
+	regmap_update_bits(clkr->regmap, phy_mux->reg,
+			   PHY_MUX_MASK,
+			   FIELD_PREP(PHY_MUX_MASK, PHY_MUX_REF_SRC));
+}
+
+const struct clk_ops clk_regmap_phy_mux_ops = {
+	.enable = phy_mux_enable,
+	.disable = phy_mux_disable,
+	.is_enabled = phy_mux_is_enabled,
+};
+EXPORT_SYMBOL_GPL(clk_regmap_phy_mux_ops);
diff --git a/drivers/clk/qcom/clk-regmap-phy-mux.h b/drivers/clk/qcom/clk-regmap-phy-mux.h
new file mode 100644
index 000000000000..614dd384695c
--- /dev/null
+++ b/drivers/clk/qcom/clk-regmap-phy-mux.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2022, Linaro Ltd.
+ */
+
+#ifndef __QCOM_CLK_REGMAP_PHY_MUX_H__
+#define __QCOM_CLK_REGMAP_PHY_MUX_H__
+
+#include "clk-regmap.h"
+
+/*
+ * A clock implementation for PHY pipe and symbols clock muxes.
+ *
+ * If the clock is running off the from-PHY source, report it as enabled.
+ * Report it as disabled otherwise (if it uses reference source).
+ *
+ * This way the PHY will disable the pipe clock before turning off the GDSC,
+ * which in turn would lead to disabling corresponding pipe_clk_src (and thus
+ * it being parked to a safe, reference clock source). And vice versa, after
+ * enabling the GDSC the PHY will enable the pipe clock, which would cause
+ * pipe_clk_src to be switched from a safe source to the working one.
+ *
+ * For some platforms this should be used for the UFS symbol_clk_src clocks
+ * too.
+ */
+struct clk_regmap_phy_mux {
+	u32			reg;
+	struct clk_regmap	clkr;
+};
+
+extern const struct clk_ops clk_regmap_phy_mux_ops;
+
+#endif
-- 
2.35.1

Re: [PATCH v10 1/5] clk: qcom: regmap: add PHY clock source implementation

[kernel test robot]

Hi Dmitry,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on v5.18]
[also build test ERROR on next-20220603]
[cannot apply to clk/clk-next helgaas-pci/next agross-msm/qcom/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/intel-lab-lkp/linux/commits/Dmitry-Baryshkov/PCI-qcom-Rework-pipe_clk-pipe_clk_src-handling/20220605-164136
base:    4b0986a3613c92f4ec1bdc7f60ec66fea135991f
config: mips-randconfig-r005-20220605 (https://download.01.org/0day-ci/archive/20220605/202206052344.Lkv2vI5x-lkp@intel.com/config)
compiler: clang version 15.0.0 (https://github.com/llvm/llvm-project 416a5080d89066029f9889dc23f94de47c2fa895)
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # install mips cross compiling tool for clang build
        # apt-get install binutils-mips-linux-gnu
        # https://github.com/intel-lab-lkp/linux/commit/4fbc2ca1313223feb409121fa1028557f72a310b
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Dmitry-Baryshkov/PCI-qcom-Rework-pipe_clk-pipe_clk_src-handling/20220605-164136
        git checkout 4fbc2ca1313223feb409121fa1028557f72a310b
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=mips SHELL=/bin/bash drivers/clk/qcom/

If you fix the issue, kindly add following tag where applicable
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

>> drivers/clk/qcom/clk-regmap-phy-mux.c:30:8: error: call to undeclared function 'FIELD_GET'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
           val = FIELD_GET(PHY_MUX_MASK, val);
                 ^
>> drivers/clk/qcom/clk-regmap-phy-mux.c:44:7: error: call to undeclared function 'FIELD_PREP'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
                                     FIELD_PREP(PHY_MUX_MASK, PHY_MUX_PHY_SRC));
                                     ^
   drivers/clk/qcom/clk-regmap-phy-mux.c:54:7: error: call to undeclared function 'FIELD_PREP'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
                              FIELD_PREP(PHY_MUX_MASK, PHY_MUX_REF_SRC));
                              ^
   3 errors generated.


vim +/FIELD_GET +30 drivers/clk/qcom/clk-regmap-phy-mux.c

    22	
    23	static int phy_mux_is_enabled(struct clk_hw *hw)
    24	{
    25		struct clk_regmap *clkr = to_clk_regmap(hw);
    26		struct clk_regmap_phy_mux *phy_mux = to_clk_regmap_phy_mux(clkr);
    27		unsigned int val;
    28	
    29		regmap_read(clkr->regmap, phy_mux->reg, &val);
  > 30		val = FIELD_GET(PHY_MUX_MASK, val);
    31	
    32		WARN_ON(val != PHY_MUX_PHY_SRC && val != PHY_MUX_REF_SRC);
    33	
    34		return val == PHY_MUX_PHY_SRC;
    35	}
    36	
    37	static int phy_mux_enable(struct clk_hw *hw)
    38	{
    39		struct clk_regmap *clkr = to_clk_regmap(hw);
    40		struct clk_regmap_phy_mux *phy_mux = to_clk_regmap_phy_mux(clkr);
    41	
    42		return regmap_update_bits(clkr->regmap, phy_mux->reg,
    43					  PHY_MUX_MASK,
  > 44					  FIELD_PREP(PHY_MUX_MASK, PHY_MUX_PHY_SRC));
    45	}
    46	

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp

Re: [PATCH v10 1/5] clk: qcom: regmap: add PHY clock source implementation

[Johan Hovold]

On Fri, Jun 03, 2022 at 11:44:50AM +0300, Dmitry Baryshkov wrote:
> On recent Qualcomm platforms the QMP PIPE clocks feed into a set of
> muxes which must be parked to the "safe" source (bi_tcxo) when
> corresponding GDSC is turned off and on again. Currently this is
> handcoded in the PCIe driver by reparenting the gcc_pipe_N_clk_src
> clock. However the same code sequence should be applied in the
> pcie-qcom endpoint, USB3 and UFS drivers.
> 
> Rather than copying this sequence over and over again, follow the
> example of clk_rcg2_shared_ops and implement this parking in the
> enable() and disable() clock operations. Supplement the regmap-mux with
> the new clk_regmap_phy_mux type, which implements such multiplexers
> as a simple gate clocks.
> 
> This is possible since each of these multiplexers has just two clock
> sources: one coming from the PHY and a reference (XO) one.  If the clock
> is running off the from-PHY source, report it as enabled. Report it as
> disabled otherwise (if it uses reference source).
> 
> This way the PHY will disable the pipe clock before turning off the
> GDSC, which in turn would lead to disabling corresponding pipe_clk_src
> (and thus it being parked to a safe, reference clock source). And vice
> versa, after enabling the GDSC the PHY will enable the pipe clock, which
> would cause pipe_clk_src to be switched from a safe source to the
> working one.
> 
> Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
> Tested-by: Johan Hovold <johan+linaro@kernel.org>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>  drivers/clk/qcom/Makefile             |  1 +
>  drivers/clk/qcom/clk-regmap-phy-mux.c | 62 +++++++++++++++++++++++++++
>  drivers/clk/qcom/clk-regmap-phy-mux.h | 33 ++++++++++++++
>  3 files changed, 96 insertions(+)
>  create mode 100644 drivers/clk/qcom/clk-regmap-phy-mux.c
>  create mode 100644 drivers/clk/qcom/clk-regmap-phy-mux.h
> 
> diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
> index 36789f5233ef..08594230c1c1 100644
> --- a/drivers/clk/qcom/Makefile
> +++ b/drivers/clk/qcom/Makefile
> @@ -11,6 +11,7 @@ clk-qcom-y += clk-branch.o
>  clk-qcom-y += clk-regmap-divider.o
>  clk-qcom-y += clk-regmap-mux.o
>  clk-qcom-y += clk-regmap-mux-div.o
> +clk-qcom-y += clk-regmap-phy-mux.o
>  clk-qcom-$(CONFIG_KRAIT_CLOCKS) += clk-krait.o
>  clk-qcom-y += clk-hfpll.o
>  clk-qcom-y += reset.o
> diff --git a/drivers/clk/qcom/clk-regmap-phy-mux.c b/drivers/clk/qcom/clk-regmap-phy-mux.c
> new file mode 100644
> index 000000000000..a1adc075b471
> --- /dev/null
> +++ b/drivers/clk/qcom/clk-regmap-phy-mux.c
> @@ -0,0 +1,62 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2022, Linaro Ltd.
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/bitops.h>
> +#include <linux/regmap.h>
> +#include <linux/export.h>
> +
> +#include "clk-regmap.h"
> +#include "clk-regmap-phy-mux.h"
> +
> +#define PHY_MUX_MASK		GENMASK(1, 0)
> +#define PHY_MUX_PHY_SRC		0
> +#define PHY_MUX_REF_SRC		2
> +
> +static inline struct clk_regmap_phy_mux *to_clk_regmap_phy_mux(struct clk_regmap *clkr)
> +{
> +	return container_of(clkr, struct clk_regmap_phy_mux, clkr);
> +}
> +
> +static int phy_mux_is_enabled(struct clk_hw *hw)
> +{
> +	struct clk_regmap *clkr = to_clk_regmap(hw);
> +	struct clk_regmap_phy_mux *phy_mux = to_clk_regmap_phy_mux(clkr);
> +	unsigned int val;
> +
> +	regmap_read(clkr->regmap, phy_mux->reg, &val);
> +	val = FIELD_GET(PHY_MUX_MASK, val);

As reported by the build bot, you need to include linux/bitfield.h
explicitly for the FIELD macros.

Johan

[PATCH v10 2/5] clk: qcom: gcc-sm8450: use new clk_regmap_phy_mux_ops for PCIe pipe clocks

[Dmitry Baryshkov]

Use newly defined clk_regmap_phy_mux_ops for PCIe pipe clocks to let
the clock framework automatically park the clock when the clock is
switched off and restore the parent when the clock is switched on.

Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/clk/qcom/gcc-sm8450.c | 49 ++++++++++-------------------------
 1 file changed, 13 insertions(+), 36 deletions(-)

diff --git a/drivers/clk/qcom/gcc-sm8450.c b/drivers/clk/qcom/gcc-sm8450.c
index 593a195467ff..666efa5ff978 100644
--- a/drivers/clk/qcom/gcc-sm8450.c
+++ b/drivers/clk/qcom/gcc-sm8450.c
@@ -17,6 +17,7 @@
 #include "clk-regmap.h"
 #include "clk-regmap-divider.h"
 #include "clk-regmap-mux.h"
+#include "clk-regmap-phy-mux.h"
 #include "gdsc.h"
 #include "reset.h"
 
@@ -26,9 +27,7 @@ enum {
 	P_GCC_GPLL0_OUT_MAIN,
 	P_GCC_GPLL4_OUT_MAIN,
 	P_GCC_GPLL9_OUT_MAIN,
-	P_PCIE_0_PIPE_CLK,
 	P_PCIE_1_PHY_AUX_CLK,
-	P_PCIE_1_PIPE_CLK,
 	P_SLEEP_CLK,
 	P_UFS_PHY_RX_SYMBOL_0_CLK,
 	P_UFS_PHY_RX_SYMBOL_1_CLK,
@@ -153,16 +152,6 @@ static const struct clk_parent_data gcc_parent_data_3[] = {
 	{ .fw_name = "bi_tcxo" },
 };
 
-static const struct parent_map gcc_parent_map_4[] = {
-	{ P_PCIE_0_PIPE_CLK, 0 },
-	{ P_BI_TCXO, 2 },
-};
-
-static const struct clk_parent_data gcc_parent_data_4[] = {
-	{ .fw_name = "pcie_0_pipe_clk", },
-	{ .fw_name = "bi_tcxo", },
-};
-
 static const struct parent_map gcc_parent_map_5[] = {
 	{ P_PCIE_1_PHY_AUX_CLK, 0 },
 	{ P_BI_TCXO, 2 },
@@ -173,16 +162,6 @@ static const struct clk_parent_data gcc_parent_data_5[] = {
 	{ .fw_name = "bi_tcxo" },
 };
 
-static const struct parent_map gcc_parent_map_6[] = {
-	{ P_PCIE_1_PIPE_CLK, 0 },
-	{ P_BI_TCXO, 2 },
-};
-
-static const struct clk_parent_data gcc_parent_data_6[] = {
-	{ .fw_name = "pcie_1_pipe_clk" },
-	{ .fw_name = "bi_tcxo" },
-};
-
 static const struct parent_map gcc_parent_map_7[] = {
 	{ P_BI_TCXO, 0 },
 	{ P_GCC_GPLL0_OUT_MAIN, 1 },
@@ -239,17 +218,16 @@ static const struct clk_parent_data gcc_parent_data_11[] = {
 	{ .fw_name = "bi_tcxo" },
 };
 
-static struct clk_regmap_mux gcc_pcie_0_pipe_clk_src = {
+static struct clk_regmap_phy_mux gcc_pcie_0_pipe_clk_src = {
 	.reg = 0x7b060,
-	.shift = 0,
-	.width = 2,
-	.parent_map = gcc_parent_map_4,
 	.clkr = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_pcie_0_pipe_clk_src",
-			.parent_data = gcc_parent_data_4,
-			.num_parents = ARRAY_SIZE(gcc_parent_data_4),
-			.ops = &clk_regmap_mux_closest_ops,
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "pcie_0_pipe_clk",
+			},
+			.num_parents = 1,
+			.ops = &clk_regmap_phy_mux_ops,
 		},
 	},
 };
@@ -269,17 +247,16 @@ static struct clk_regmap_mux gcc_pcie_1_phy_aux_clk_src = {
 	},
 };
 
-static struct clk_regmap_mux gcc_pcie_1_pipe_clk_src = {
+static struct clk_regmap_phy_mux gcc_pcie_1_pipe_clk_src = {
 	.reg = 0x9d064,
-	.shift = 0,
-	.width = 2,
-	.parent_map = gcc_parent_map_6,
 	.clkr = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_pcie_1_pipe_clk_src",
-			.parent_data = gcc_parent_data_6,
-			.num_parents = ARRAY_SIZE(gcc_parent_data_6),
-			.ops = &clk_regmap_mux_closest_ops,
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "pcie_1_pipe_clk",
+			},
+			.num_parents = 1,
+			.ops = &clk_regmap_phy_mux_ops,
 		},
 	},
 };
-- 
2.35.1

[PATCH v10 3/5] clk: qcom: gcc-sc7280: use new clk_regmap_phy_mux_ops for PCIe pipe clocks

[Dmitry Baryshkov]

Use newly defined clk_regmap_phy_mux_ops for PCIe pipe clocks to let
the clock framework automatically park the clock when the clock is
switched off and restore the parent when the clock is switched on.

Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/clk/qcom/gcc-sc7280.c | 47 ++++++++++-------------------------
 1 file changed, 13 insertions(+), 34 deletions(-)

diff --git a/drivers/clk/qcom/gcc-sc7280.c b/drivers/clk/qcom/gcc-sc7280.c
index 423627d49719..5a853497d211 100644
--- a/drivers/clk/qcom/gcc-sc7280.c
+++ b/drivers/clk/qcom/gcc-sc7280.c
@@ -17,6 +17,7 @@
 #include "clk-rcg.h"
 #include "clk-regmap-divider.h"
 #include "clk-regmap-mux.h"
+#include "clk-regmap-phy-mux.h"
 #include "common.h"
 #include "gdsc.h"
 #include "reset.h"
@@ -255,26 +256,6 @@ static const struct clk_parent_data gcc_parent_data_5[] = {
 	{ .hw = &gcc_gpll0_out_even.clkr.hw },
 };
 
-static const struct parent_map gcc_parent_map_6[] = {
-	{ P_PCIE_0_PIPE_CLK, 0 },
-	{ P_BI_TCXO, 2 },
-};
-
-static const struct clk_parent_data gcc_parent_data_6[] = {
-	{ .fw_name = "pcie_0_pipe_clk", .name = "pcie_0_pipe_clk" },
-	{ .fw_name = "bi_tcxo" },
-};
-
-static const struct parent_map gcc_parent_map_7[] = {
-	{ P_PCIE_1_PIPE_CLK, 0 },
-	{ P_BI_TCXO, 2 },
-};
-
-static const struct clk_parent_data gcc_parent_data_7[] = {
-	{ .fw_name = "pcie_1_pipe_clk", .name = "pcie_1_pipe_clk" },
-	{ .fw_name = "bi_tcxo" },
-};
-
 static const struct parent_map gcc_parent_map_8[] = {
 	{ P_BI_TCXO, 0 },
 	{ P_GCC_GPLL0_OUT_MAIN, 1 },
@@ -369,32 +350,30 @@ static const struct clk_parent_data gcc_parent_data_15[] = {
 	{ .hw = &gcc_mss_gpll0_main_div_clk_src.clkr.hw },
 };
 
-static struct clk_regmap_mux gcc_pcie_0_pipe_clk_src = {
+static struct clk_regmap_phy_mux gcc_pcie_0_pipe_clk_src = {
 	.reg = 0x6b054,
-	.shift = 0,
-	.width = 2,
-	.parent_map = gcc_parent_map_6,
 	.clkr = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_pcie_0_pipe_clk_src",
-			.parent_data = gcc_parent_data_6,
-			.num_parents = ARRAY_SIZE(gcc_parent_data_6),
-			.ops = &clk_regmap_mux_closest_ops,
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "pcie_0_pipe_clk", .name = "pcie_0_pipe_clk",
+			},
+			.num_parents = 1,
+			.ops = &clk_regmap_phy_mux_ops,
 		},
 	},
 };
 
-static struct clk_regmap_mux gcc_pcie_1_pipe_clk_src = {
+static struct clk_regmap_phy_mux gcc_pcie_1_pipe_clk_src = {
 	.reg = 0x8d054,
-	.shift = 0,
-	.width = 2,
-	.parent_map = gcc_parent_map_7,
 	.clkr = {
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_pcie_1_pipe_clk_src",
-			.parent_data = gcc_parent_data_7,
-			.num_parents = ARRAY_SIZE(gcc_parent_data_7),
-			.ops = &clk_regmap_mux_closest_ops,
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "pcie_1_pipe_clk", .name = "pcie_1_pipe_clk",
+			},
+			.num_parents = 1,
+			.ops = &clk_regmap_phy_mux_ops,
 		},
 	},
 };
-- 
2.35.1

Re: [PATCH v10 3/5] clk: qcom: gcc-sc7280: use new clk_regmap_phy_mux_ops for PCIe pipe clocks

[Johan Hovold]

On Fri, Jun 03, 2022 at 11:44:52AM +0300, Dmitry Baryshkov wrote:
> Use newly defined clk_regmap_phy_mux_ops for PCIe pipe clocks to let
> the clock framework automatically park the clock when the clock is
> switched off and restore the parent when the clock is switched on.
> 
> Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>  drivers/clk/qcom/gcc-sc7280.c | 47 ++++++++++-------------------------
>  1 file changed, 13 insertions(+), 34 deletions(-)
> 
> diff --git a/drivers/clk/qcom/gcc-sc7280.c b/drivers/clk/qcom/gcc-sc7280.c
> index 423627d49719..5a853497d211 100644
> --- a/drivers/clk/qcom/gcc-sc7280.c
> +++ b/drivers/clk/qcom/gcc-sc7280.c
> @@ -17,6 +17,7 @@
>  #include "clk-rcg.h"
>  #include "clk-regmap-divider.h"
>  #include "clk-regmap-mux.h"
> +#include "clk-regmap-phy-mux.h"
>  #include "common.h"
>  #include "gdsc.h"
>  #include "reset.h"
> @@ -255,26 +256,6 @@ static const struct clk_parent_data gcc_parent_data_5[] = {
>  	{ .hw = &gcc_gpll0_out_even.clkr.hw },
>  };
>  
> -static const struct parent_map gcc_parent_map_6[] = {
> -	{ P_PCIE_0_PIPE_CLK, 0 },
> -	{ P_BI_TCXO, 2 },
> -};
> -
> -static const struct clk_parent_data gcc_parent_data_6[] = {
> -	{ .fw_name = "pcie_0_pipe_clk", .name = "pcie_0_pipe_clk" },
> -	{ .fw_name = "bi_tcxo" },
> -};
> -
> -static const struct parent_map gcc_parent_map_7[] = {
> -	{ P_PCIE_1_PIPE_CLK, 0 },
> -	{ P_BI_TCXO, 2 },
> -};
> -
> -static const struct clk_parent_data gcc_parent_data_7[] = {
> -	{ .fw_name = "pcie_1_pipe_clk", .name = "pcie_1_pipe_clk" },
> -	{ .fw_name = "bi_tcxo" },
> -};
> -
>  static const struct parent_map gcc_parent_map_8[] = {
>  	{ P_BI_TCXO, 0 },
>  	{ P_GCC_GPLL0_OUT_MAIN, 1 },
> @@ -369,32 +350,30 @@ static const struct clk_parent_data gcc_parent_data_15[] = {
>  	{ .hw = &gcc_mss_gpll0_main_div_clk_src.clkr.hw },
>  };
>  
> -static struct clk_regmap_mux gcc_pcie_0_pipe_clk_src = {
> +static struct clk_regmap_phy_mux gcc_pcie_0_pipe_clk_src = {
>  	.reg = 0x6b054,
> -	.shift = 0,
> -	.width = 2,
> -	.parent_map = gcc_parent_map_6,
>  	.clkr = {
>  		.hw.init = &(struct clk_init_data){
>  			.name = "gcc_pcie_0_pipe_clk_src",
> -			.parent_data = gcc_parent_data_6,
> -			.num_parents = ARRAY_SIZE(gcc_parent_data_6),
> -			.ops = &clk_regmap_mux_closest_ops,
> +			.parent_data = &(const struct clk_parent_data){
> +				.fw_name = "pcie_0_pipe_clk", .name = "pcie_0_pipe_clk",

No need to initialise fw_name and name on the same line here.

> +			},
> +			.num_parents = 1,
> +			.ops = &clk_regmap_phy_mux_ops,
>  		},
>  	},
>  };
>  
> -static struct clk_regmap_mux gcc_pcie_1_pipe_clk_src = {
> +static struct clk_regmap_phy_mux gcc_pcie_1_pipe_clk_src = {
>  	.reg = 0x8d054,
> -	.shift = 0,
> -	.width = 2,
> -	.parent_map = gcc_parent_map_7,
>  	.clkr = {
>  		.hw.init = &(struct clk_init_data){
>  			.name = "gcc_pcie_1_pipe_clk_src",
> -			.parent_data = gcc_parent_data_7,
> -			.num_parents = ARRAY_SIZE(gcc_parent_data_7),
> -			.ops = &clk_regmap_mux_closest_ops,
> +			.parent_data = &(const struct clk_parent_data){
> +				.fw_name = "pcie_1_pipe_clk", .name = "pcie_1_pipe_clk",

Same here.

> +			},
> +			.num_parents = 1,
> +			.ops = &clk_regmap_phy_mux_ops,
>  		},
>  	},
>  };

Johan

[PATCH v10 4/5] PCI: qcom: Remove unnecessary pipe_clk handling

[Dmitry Baryshkov]

PCIe PHY drivers (both QMP and PCIe2) already do clk_prepare_enable() /
clk_prepare_disable() pipe_clk. Remove extra calls to enable/disable
this clock from the PCIe driver, so that the PHY driver can manage the
clock on its own.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 44 ++------------------------
 1 file changed, 3 insertions(+), 41 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 2ea13750b492..8c1073452196 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -128,7 +128,6 @@ struct qcom_pcie_resources_2_3_2 {
 	struct clk *master_clk;
 	struct clk *slave_clk;
 	struct clk *cfg_clk;
-	struct clk *pipe_clk;
 	struct regulator_bulk_data supplies[QCOM_PCIE_2_3_2_MAX_SUPPLY];
 };
 
@@ -165,7 +164,6 @@ struct qcom_pcie_resources_2_7_0 {
 	int num_clks;
 	struct regulator_bulk_data supplies[2];
 	struct reset_control *pci_reset;
-	struct clk *pipe_clk;
 	struct clk *pipe_clk_src;
 	struct clk *phy_pipe_clk;
 	struct clk *ref_clk_src;
@@ -597,8 +595,7 @@ static int qcom_pcie_get_resources_2_3_2(struct qcom_pcie *pcie)
 	if (IS_ERR(res->slave_clk))
 		return PTR_ERR(res->slave_clk);
 
-	res->pipe_clk = devm_clk_get(dev, "pipe");
-	return PTR_ERR_OR_ZERO(res->pipe_clk);
+	return 0;
 }
 
 static void qcom_pcie_deinit_2_3_2(struct qcom_pcie *pcie)
@@ -613,13 +610,6 @@ static void qcom_pcie_deinit_2_3_2(struct qcom_pcie *pcie)
 	regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
 }
 
-static void qcom_pcie_post_deinit_2_3_2(struct qcom_pcie *pcie)
-{
-	struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
-
-	clk_disable_unprepare(res->pipe_clk);
-}
-
 static int qcom_pcie_init_2_3_2(struct qcom_pcie *pcie)
 {
 	struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
@@ -694,22 +684,6 @@ static int qcom_pcie_init_2_3_2(struct qcom_pcie *pcie)
 	return ret;
 }
 
-static int qcom_pcie_post_init_2_3_2(struct qcom_pcie *pcie)
-{
-	struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
-	struct dw_pcie *pci = pcie->pci;
-	struct device *dev = pci->dev;
-	int ret;
-
-	ret = clk_prepare_enable(res->pipe_clk);
-	if (ret) {
-		dev_err(dev, "cannot prepare/enable pipe clock\n");
-		return ret;
-	}
-
-	return 0;
-}
-
 static int qcom_pcie_get_resources_2_4_0(struct qcom_pcie *pcie)
 {
 	struct qcom_pcie_resources_2_4_0 *res = &pcie->res.v2_4_0;
@@ -1198,8 +1172,7 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
 			return PTR_ERR(res->ref_clk_src);
 	}
 
-	res->pipe_clk = devm_clk_get(dev, "pipe");
-	return PTR_ERR_OR_ZERO(res->pipe_clk);
+	return 0;
 }
 
 static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
@@ -1292,14 +1265,7 @@ static int qcom_pcie_post_init_2_7_0(struct qcom_pcie *pcie)
 	if (pcie->cfg->pipe_clk_need_muxing)
 		clk_set_parent(res->pipe_clk_src, res->phy_pipe_clk);
 
-	return clk_prepare_enable(res->pipe_clk);
-}
-
-static void qcom_pcie_post_deinit_2_7_0(struct qcom_pcie *pcie)
-{
-	struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
-
-	clk_disable_unprepare(res->pipe_clk);
+	return 0;
 }
 
 static int qcom_pcie_link_up(struct dw_pcie *pci)
@@ -1449,9 +1415,7 @@ static const struct qcom_pcie_ops ops_1_0_0 = {
 static const struct qcom_pcie_ops ops_2_3_2 = {
 	.get_resources = qcom_pcie_get_resources_2_3_2,
 	.init = qcom_pcie_init_2_3_2,
-	.post_init = qcom_pcie_post_init_2_3_2,
 	.deinit = qcom_pcie_deinit_2_3_2,
-	.post_deinit = qcom_pcie_post_deinit_2_3_2,
 	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
 };
 
@@ -1478,7 +1442,6 @@ static const struct qcom_pcie_ops ops_2_7_0 = {
 	.deinit = qcom_pcie_deinit_2_7_0,
 	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
 	.post_init = qcom_pcie_post_init_2_7_0,
-	.post_deinit = qcom_pcie_post_deinit_2_7_0,
 };
 
 /* Qcom IP rev.: 1.9.0 */
@@ -1488,7 +1451,6 @@ static const struct qcom_pcie_ops ops_1_9_0 = {
 	.deinit = qcom_pcie_deinit_2_7_0,
 	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
 	.post_init = qcom_pcie_post_init_2_7_0,
-	.post_deinit = qcom_pcie_post_deinit_2_7_0,
 	.config_sid = qcom_pcie_config_sid_sm8250,
 };
 
-- 
2.35.1

[PATCH v10 5/5] PCI: qcom: Drop manual pipe_clk_src handling

[Dmitry Baryshkov]

Manual reparenting of pipe_clk_src is being replaced with the parking of
the clock with clk_disable()/clk_enable() in the phy driver. Drop
redundant code switching of the pipe clock between the PHY clock source
and the safe bi_tcxo.

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 39 +-------------------------
 1 file changed, 1 insertion(+), 38 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 8c1073452196..9a95ecf5a688 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -164,9 +164,6 @@ struct qcom_pcie_resources_2_7_0 {
 	int num_clks;
 	struct regulator_bulk_data supplies[2];
 	struct reset_control *pci_reset;
-	struct clk *pipe_clk_src;
-	struct clk *phy_pipe_clk;
-	struct clk *ref_clk_src;
 };
 
 union qcom_pcie_resources {
@@ -192,7 +189,6 @@ struct qcom_pcie_ops {
 
 struct qcom_pcie_cfg {
 	const struct qcom_pcie_ops *ops;
-	unsigned int pipe_clk_need_muxing:1;
 	unsigned int has_tbu_clk:1;
 	unsigned int has_ddrss_sf_tbu_clk:1;
 	unsigned int has_aggre0_clk:1;
@@ -1158,20 +1154,6 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
 	if (ret < 0)
 		return ret;
 
-	if (pcie->cfg->pipe_clk_need_muxing) {
-		res->pipe_clk_src = devm_clk_get(dev, "pipe_mux");
-		if (IS_ERR(res->pipe_clk_src))
-			return PTR_ERR(res->pipe_clk_src);
-
-		res->phy_pipe_clk = devm_clk_get(dev, "phy_pipe");
-		if (IS_ERR(res->phy_pipe_clk))
-			return PTR_ERR(res->phy_pipe_clk);
-
-		res->ref_clk_src = devm_clk_get(dev, "ref");
-		if (IS_ERR(res->ref_clk_src))
-			return PTR_ERR(res->ref_clk_src);
-	}
-
 	return 0;
 }
 
@@ -1189,10 +1171,6 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
 		return ret;
 	}
 
-	/* Set TCXO as clock source for pcie_pipe_clk_src */
-	if (pcie->cfg->pipe_clk_need_muxing)
-		clk_set_parent(res->pipe_clk_src, res->ref_clk_src);
-
 	ret = clk_bulk_prepare_enable(res->num_clks, res->clks);
 	if (ret < 0)
 		goto err_disable_regulators;
@@ -1254,18 +1232,8 @@ static void qcom_pcie_deinit_2_7_0(struct qcom_pcie *pcie)
 	struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
 
 	clk_bulk_disable_unprepare(res->num_clks, res->clks);
-	regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
-}
 
-static int qcom_pcie_post_init_2_7_0(struct qcom_pcie *pcie)
-{
-	struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
-
-	/* Set pipe clock as clock source for pcie_pipe_clk_src */
-	if (pcie->cfg->pipe_clk_need_muxing)
-		clk_set_parent(res->pipe_clk_src, res->phy_pipe_clk);
-
-	return 0;
+	regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
 }
 
 static int qcom_pcie_link_up(struct dw_pcie *pci)
@@ -1441,7 +1409,6 @@ static const struct qcom_pcie_ops ops_2_7_0 = {
 	.init = qcom_pcie_init_2_7_0,
 	.deinit = qcom_pcie_deinit_2_7_0,
 	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
-	.post_init = qcom_pcie_post_init_2_7_0,
 };
 
 /* Qcom IP rev.: 1.9.0 */
@@ -1450,7 +1417,6 @@ static const struct qcom_pcie_ops ops_1_9_0 = {
 	.init = qcom_pcie_init_2_7_0,
 	.deinit = qcom_pcie_deinit_2_7_0,
 	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
-	.post_init = qcom_pcie_post_init_2_7_0,
 	.config_sid = qcom_pcie_config_sid_sm8250,
 };
 
@@ -1495,7 +1461,6 @@ static const struct qcom_pcie_cfg sm8250_cfg = {
 static const struct qcom_pcie_cfg sm8450_pcie0_cfg = {
 	.ops = &ops_1_9_0,
 	.has_ddrss_sf_tbu_clk = true,
-	.pipe_clk_need_muxing = true,
 	.has_aggre0_clk = true,
 	.has_aggre1_clk = true,
 };
@@ -1503,14 +1468,12 @@ static const struct qcom_pcie_cfg sm8450_pcie0_cfg = {
 static const struct qcom_pcie_cfg sm8450_pcie1_cfg = {
 	.ops = &ops_1_9_0,
 	.has_ddrss_sf_tbu_clk = true,
-	.pipe_clk_need_muxing = true,
 	.has_aggre1_clk = true,
 };
 
 static const struct qcom_pcie_cfg sc7280_cfg = {
 	.ops = &ops_1_9_0,
 	.has_tbu_clk = true,
-	.pipe_clk_need_muxing = true,
 };
 
 static const struct qcom_pcie_cfg sc8180x_cfg = {
-- 
2.35.1