* [PATCH] ARM: dts: aspeed: ast2600-evb: Update I2C devices
@ 2022-06-23 9:47 ` Joel Stanley
0 siblings, 0 replies; 6+ messages in thread
From: Joel Stanley @ 2022-06-23 9:47 UTC (permalink / raw)
To: Ryan Chen, devicetree, linux-arm-kernel, linux-aspeed
Cc: Cédric Le Goater
The AST2600A3 EVB has the following I2C devices:
- ADT7490 at 0x2e
- EEPROM at 0xa0
- LM75 at 0x9a
The bus these devices appear on can be configured by jumpers. The device
tree is configured with the buses given by the default jumper settings.
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-ast2600-evb.dts | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
index 5a6063bd4508..9da70b873ab6 100644
--- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
@@ -207,11 +207,6 @@ &uart5 {
&i2c0 {
status = "okay";
-
- temp@2e {
- compatible = "adi,adt7490";
- reg = <0x2e>;
- };
};
&i2c1 {
@@ -240,10 +235,26 @@ &i2c6 {
&i2c7 {
status = "okay";
+
+ temp@2e {
+ compatible = "adi,adt7490";
+ reg = <0x2e>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c08";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
};
&i2c8 {
status = "okay";
+
+ lm75@4d {
+ compatible = "national,lm75";
+ reg = <0x4d>;
+ };
};
&i2c9 {
--
2.35.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH] ARM: dts: aspeed: ast2600-evb: Update I2C devices
@ 2022-06-23 9:47 ` Joel Stanley
0 siblings, 0 replies; 6+ messages in thread
From: Joel Stanley @ 2022-06-23 9:47 UTC (permalink / raw)
To: Ryan Chen, devicetree, linux-arm-kernel, linux-aspeed
Cc: Cédric Le Goater
The AST2600A3 EVB has the following I2C devices:
- ADT7490 at 0x2e
- EEPROM at 0xa0
- LM75 at 0x9a
The bus these devices appear on can be configured by jumpers. The device
tree is configured with the buses given by the default jumper settings.
Signed-off-by: Joel Stanley <joel@jms.id.au>
---
arch/arm/boot/dts/aspeed-ast2600-evb.dts | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
index 5a6063bd4508..9da70b873ab6 100644
--- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
@@ -207,11 +207,6 @@ &uart5 {
&i2c0 {
status = "okay";
-
- temp@2e {
- compatible = "adi,adt7490";
- reg = <0x2e>;
- };
};
&i2c1 {
@@ -240,10 +235,26 @@ &i2c6 {
&i2c7 {
status = "okay";
+
+ temp@2e {
+ compatible = "adi,adt7490";
+ reg = <0x2e>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c08";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
};
&i2c8 {
status = "okay";
+
+ lm75@4d {
+ compatible = "national,lm75";
+ reg = <0x4d>;
+ };
};
&i2c9 {
--
2.35.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] ARM: dts: aspeed: ast2600-evb: Update I2C devices
2022-06-23 9:47 ` Joel Stanley
@ 2022-06-24 6:06 ` Cédric Le Goater
-1 siblings, 0 replies; 6+ messages in thread
From: Cédric Le Goater @ 2022-06-24 6:06 UTC (permalink / raw)
To: Joel Stanley, Ryan Chen, devicetree, linux-arm-kernel, linux-aspeed
On 6/23/22 11:47, Joel Stanley wrote:
> The AST2600A3 EVB has the following I2C devices:
>
> - ADT7490 at 0x2e
> - EEPROM at 0xa0
> - LM75 at 0x9a
>
> The bus these devices appear on can be configured by jumpers. The device
> tree is configured with the buses given by the default jumper settings.
>
> Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Thanks,
C.
> ---
> arch/arm/boot/dts/aspeed-ast2600-evb.dts | 21 ++++++++++++++++-----
> 1 file changed, 16 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
> index 5a6063bd4508..9da70b873ab6 100644
> --- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts
> +++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
> @@ -207,11 +207,6 @@ &uart5 {
>
> &i2c0 {
> status = "okay";
> -
> - temp@2e {
> - compatible = "adi,adt7490";
> - reg = <0x2e>;
> - };
> };
>
> &i2c1 {
> @@ -240,10 +235,26 @@ &i2c6 {
>
> &i2c7 {
> status = "okay";
> +
> + temp@2e {
> + compatible = "adi,adt7490";
> + reg = <0x2e>;
> + };
> +
> + eeprom@50 {
> + compatible = "atmel,24c08";
> + reg = <0x50>;
> + pagesize = <16>;
> + };
> };
>
> &i2c8 {
> status = "okay";
> +
> + lm75@4d {
> + compatible = "national,lm75";
> + reg = <0x4d>;
> + };
> };
>
> &i2c9 {
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] ARM: dts: aspeed: ast2600-evb: Update I2C devices
@ 2022-06-24 6:06 ` Cédric Le Goater
0 siblings, 0 replies; 6+ messages in thread
From: Cédric Le Goater @ 2022-06-24 6:06 UTC (permalink / raw)
To: Joel Stanley, Ryan Chen, devicetree, linux-arm-kernel, linux-aspeed
On 6/23/22 11:47, Joel Stanley wrote:
> The AST2600A3 EVB has the following I2C devices:
>
> - ADT7490 at 0x2e
> - EEPROM at 0xa0
> - LM75 at 0x9a
>
> The bus these devices appear on can be configured by jumpers. The device
> tree is configured with the buses given by the default jumper settings.
>
> Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Thanks,
C.
> ---
> arch/arm/boot/dts/aspeed-ast2600-evb.dts | 21 ++++++++++++++++-----
> 1 file changed, 16 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
> index 5a6063bd4508..9da70b873ab6 100644
> --- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts
> +++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
> @@ -207,11 +207,6 @@ &uart5 {
>
> &i2c0 {
> status = "okay";
> -
> - temp@2e {
> - compatible = "adi,adt7490";
> - reg = <0x2e>;
> - };
> };
>
> &i2c1 {
> @@ -240,10 +235,26 @@ &i2c6 {
>
> &i2c7 {
> status = "okay";
> +
> + temp@2e {
> + compatible = "adi,adt7490";
> + reg = <0x2e>;
> + };
> +
> + eeprom@50 {
> + compatible = "atmel,24c08";
> + reg = <0x50>;
> + pagesize = <16>;
> + };
> };
>
> &i2c8 {
> status = "okay";
> +
> + lm75@4d {
> + compatible = "national,lm75";
> + reg = <0x4d>;
> + };
> };
>
> &i2c9 {
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: [PATCH] ARM: dts: aspeed: ast2600-evb: Update I2C devices
2022-06-24 6:06 ` Cédric Le Goater
@ 2022-06-25 2:02 ` Ryan Chen
-1 siblings, 0 replies; 6+ messages in thread
From: Ryan Chen @ 2022-06-25 2:02 UTC (permalink / raw)
To: Cédric Le Goater, Joel Stanley, devicetree,
linux-arm-kernel, linux-aspeed
Ryan
> -----Original Message-----
> From: Cédric Le Goater <clg@kaod.org>
> Sent: Friday, June 24, 2022 2:06 PM
> To: Joel Stanley <joel@jms.id.au>; Ryan Chen <ryan_chen@aspeedtech.com>;
> devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> linux-aspeed@lists.ozlabs.org
> Subject: Re: [PATCH] ARM: dts: aspeed: ast2600-evb: Update I2C devices
>
> On 6/23/22 11:47, Joel Stanley wrote:
> > The AST2600A3 EVB has the following I2C devices:
> >
> > - ADT7490 at 0x2e
> > - EEPROM at 0xa0
> > - LM75 at 0x9a
> >
> > The bus these devices appear on can be configured by jumpers. The
> > device tree is configured with the buses given by the default jumper settings.
> >
> > Signed-off-by: Joel Stanley <joel@jms.id.au>
>
> Reviewed-by: Cédric Le Goater <clg@kaod.org>
>
Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>
>
> C.
>
> > ---
> > arch/arm/boot/dts/aspeed-ast2600-evb.dts | 21 ++++++++++++++++-----
> > 1 file changed, 16 insertions(+), 5 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts
> > b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
> > index 5a6063bd4508..9da70b873ab6 100644
> > --- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts
> > +++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
> > @@ -207,11 +207,6 @@ &uart5 {
> >
> > &i2c0 {
> > status = "okay";
> > -
> > - temp@2e {
> > - compatible = "adi,adt7490";
> > - reg = <0x2e>;
> > - };
> > };
> >
> > &i2c1 {
> > @@ -240,10 +235,26 @@ &i2c6 {
> >
> > &i2c7 {
> > status = "okay";
> > +
> > + temp@2e {
> > + compatible = "adi,adt7490";
> > + reg = <0x2e>;
> > + };
> > +
> > + eeprom@50 {
> > + compatible = "atmel,24c08";
> > + reg = <0x50>;
> > + pagesize = <16>;
> > + };
> > };
> >
> > &i2c8 {
> > status = "okay";
> > +
> > + lm75@4d {
> > + compatible = "national,lm75";
> > + reg = <0x4d>;
> > + };
> > };
> >
> > &i2c9 {
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: [PATCH] ARM: dts: aspeed: ast2600-evb: Update I2C devices
@ 2022-06-25 2:02 ` Ryan Chen
0 siblings, 0 replies; 6+ messages in thread
From: Ryan Chen @ 2022-06-25 2:02 UTC (permalink / raw)
To: Cédric Le Goater, Joel Stanley, devicetree,
linux-arm-kernel, linux-aspeed
Ryan
> -----Original Message-----
> From: Cédric Le Goater <clg@kaod.org>
> Sent: Friday, June 24, 2022 2:06 PM
> To: Joel Stanley <joel@jms.id.au>; Ryan Chen <ryan_chen@aspeedtech.com>;
> devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> linux-aspeed@lists.ozlabs.org
> Subject: Re: [PATCH] ARM: dts: aspeed: ast2600-evb: Update I2C devices
>
> On 6/23/22 11:47, Joel Stanley wrote:
> > The AST2600A3 EVB has the following I2C devices:
> >
> > - ADT7490 at 0x2e
> > - EEPROM at 0xa0
> > - LM75 at 0x9a
> >
> > The bus these devices appear on can be configured by jumpers. The
> > device tree is configured with the buses given by the default jumper settings.
> >
> > Signed-off-by: Joel Stanley <joel@jms.id.au>
>
> Reviewed-by: Cédric Le Goater <clg@kaod.org>
>
Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>
>
> C.
>
> > ---
> > arch/arm/boot/dts/aspeed-ast2600-evb.dts | 21 ++++++++++++++++-----
> > 1 file changed, 16 insertions(+), 5 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts
> > b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
> > index 5a6063bd4508..9da70b873ab6 100644
> > --- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts
> > +++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
> > @@ -207,11 +207,6 @@ &uart5 {
> >
> > &i2c0 {
> > status = "okay";
> > -
> > - temp@2e {
> > - compatible = "adi,adt7490";
> > - reg = <0x2e>;
> > - };
> > };
> >
> > &i2c1 {
> > @@ -240,10 +235,26 @@ &i2c6 {
> >
> > &i2c7 {
> > status = "okay";
> > +
> > + temp@2e {
> > + compatible = "adi,adt7490";
> > + reg = <0x2e>;
> > + };
> > +
> > + eeprom@50 {
> > + compatible = "atmel,24c08";
> > + reg = <0x50>;
> > + pagesize = <16>;
> > + };
> > };
> >
> > &i2c8 {
> > status = "okay";
> > +
> > + lm75@4d {
> > + compatible = "national,lm75";
> > + reg = <0x4d>;
> > + };
> > };
> >
> > &i2c9 {
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-06-25 6:38 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-06-23 9:47 [PATCH] ARM: dts: aspeed: ast2600-evb: Update I2C devices Joel Stanley
2022-06-23 9:47 ` Joel Stanley
2022-06-24 6:06 ` Cédric Le Goater
2022-06-24 6:06 ` Cédric Le Goater
2022-06-25 2:02 ` Ryan Chen
2022-06-25 2:02 ` Ryan Chen
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.