From: Daniel Mack <daniel@zonque.org> To: broonie@kernel.org, ryan.lee.analog@gmail.com Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org, robh+dt@kernel.org, Daniel Mack <daniel@zonque.org> Subject: [PATCH 1/8] ASoC: dt-bindings: max98396: add voltage supplies Date: Fri, 24 Jun 2022 12:47:05 +0200 [thread overview] Message-ID: <20220624104712.1934484-2-daniel@zonque.org> (raw) In-Reply-To: <20220624104712.1934484-1-daniel@zonque.org> The device is supplied with 3 core voltages (DVVDIO, DVDD, AVDD), and PVDD and/or VBAT. Signed-off-by: Daniel Mack <daniel@zonque.org> --- .../bindings/sound/adi,max98396.yaml | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/adi,max98396.yaml b/Documentation/devicetree/bindings/sound/adi,max98396.yaml index ec4c10c2598a..a23ac8036e1c 100644 --- a/Documentation/devicetree/bindings/sound/adi,max98396.yaml +++ b/Documentation/devicetree/bindings/sound/adi,max98396.yaml @@ -24,6 +24,21 @@ properties: maxItems: 1 description: I2C address of the device. + avdd-supply: + description: A 1.8V supply that powers up the AVDD pin. + + dvdd-supply: + description: A 1.2V supply that powers up the DVDD pin. + + dvddio-supply: + description: A 1.2V or 1.8V supply that powers up the VDDIO pin. + + pvdd-supply: + description: A 3.0V to 20V supply that powers up the PVDD pin. + + vbat-supply: + description: A 3.3V to 5.5V supply that powers up the VBAT pin. + adi,vmon-slot-no: description: slot number of the voltage sense monitor $ref: "/schemas/types.yaml#/definitions/uint32" @@ -72,6 +87,10 @@ examples: max98396: amplifier@39 { compatible = "adi,max98396"; reg = <0x39>; + dvdd-supply = <®ulator_1v2>; + dvddio-supply = <®ulator_1v8>; + avdd-supply = <®ulator_1v8>; + pvdd-supply = <®ulator_pvdd>; adi,vmon-slot-no = <0>; adi,imon-slot-no = <1>; reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>; -- 2.36.1
WARNING: multiple messages have this Message-ID (diff)
From: Daniel Mack <daniel@zonque.org> To: broonie@kernel.org, ryan.lee.analog@gmail.com Cc: robh+dt@kernel.org, alsa-devel@alsa-project.org, devicetree@vger.kernel.org, Daniel Mack <daniel@zonque.org> Subject: [PATCH 1/8] ASoC: dt-bindings: max98396: add voltage supplies Date: Fri, 24 Jun 2022 12:47:05 +0200 [thread overview] Message-ID: <20220624104712.1934484-2-daniel@zonque.org> (raw) In-Reply-To: <20220624104712.1934484-1-daniel@zonque.org> The device is supplied with 3 core voltages (DVVDIO, DVDD, AVDD), and PVDD and/or VBAT. Signed-off-by: Daniel Mack <daniel@zonque.org> --- .../bindings/sound/adi,max98396.yaml | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/adi,max98396.yaml b/Documentation/devicetree/bindings/sound/adi,max98396.yaml index ec4c10c2598a..a23ac8036e1c 100644 --- a/Documentation/devicetree/bindings/sound/adi,max98396.yaml +++ b/Documentation/devicetree/bindings/sound/adi,max98396.yaml @@ -24,6 +24,21 @@ properties: maxItems: 1 description: I2C address of the device. + avdd-supply: + description: A 1.8V supply that powers up the AVDD pin. + + dvdd-supply: + description: A 1.2V supply that powers up the DVDD pin. + + dvddio-supply: + description: A 1.2V or 1.8V supply that powers up the VDDIO pin. + + pvdd-supply: + description: A 3.0V to 20V supply that powers up the PVDD pin. + + vbat-supply: + description: A 3.3V to 5.5V supply that powers up the VBAT pin. + adi,vmon-slot-no: description: slot number of the voltage sense monitor $ref: "/schemas/types.yaml#/definitions/uint32" @@ -72,6 +87,10 @@ examples: max98396: amplifier@39 { compatible = "adi,max98396"; reg = <0x39>; + dvdd-supply = <®ulator_1v2>; + dvddio-supply = <®ulator_1v8>; + avdd-supply = <®ulator_1v8>; + pvdd-supply = <®ulator_pvdd>; adi,vmon-slot-no = <0>; adi,imon-slot-no = <1>; reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>; -- 2.36.1
next prev parent reply other threads:[~2022-06-24 10:48 UTC|newest] Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-06-24 10:47 [PATCH 0/8] ASoC: max98396: Some assorted fixes and additions Daniel Mack 2022-06-24 10:47 ` Daniel Mack 2022-06-24 10:47 ` Daniel Mack [this message] 2022-06-24 10:47 ` [PATCH 1/8] ASoC: dt-bindings: max98396: add voltage supplies Daniel Mack 2022-06-24 10:47 ` [PATCH 2/8] ASoC: dt-bindings: max98396: Add #sound-dai-cells Daniel Mack 2022-06-24 10:47 ` Daniel Mack 2022-06-24 17:26 ` Rob Herring 2022-06-24 17:26 ` Rob Herring 2022-06-24 10:47 ` [PATCH 3/8] ASoC: dt-bindings: max98396: Document adi,bypass-slot-no Daniel Mack 2022-06-24 10:47 ` Daniel Mack 2022-06-24 12:42 ` Mark Brown 2022-06-24 12:42 ` Mark Brown 2022-06-24 10:47 ` [PATCH 4/8] ASoC: max98396: add voltage regulators Daniel Mack 2022-06-24 10:47 ` Daniel Mack 2022-06-24 10:47 ` [PATCH 5/8] ASoC: max98396: Improve some error prints Daniel Mack 2022-06-24 10:47 ` Daniel Mack 2022-06-24 10:47 ` [PATCH 6/8] ASoC: max98396: Fix register access for PCM format settings Daniel Mack 2022-06-24 10:47 ` Daniel Mack 2022-06-24 12:52 ` Mark Brown 2022-06-24 12:52 ` Mark Brown 2022-06-24 10:47 ` [PATCH 7/8] ASoC: max98396: Implement DSP speaker monitor Daniel Mack 2022-06-24 10:47 ` Daniel Mack 2022-06-24 10:47 ` [PATCH 8/8] ASoC: max98396: Fix TDM mode BSEL settings Daniel Mack 2022-06-24 10:47 ` Daniel Mack 2022-06-24 11:34 ` Daniel Mack 2022-06-24 11:34 ` Daniel Mack 2022-06-24 12:54 ` Mark Brown 2022-06-24 12:54 ` Mark Brown 2022-06-27 20:19 ` (subset) [PATCH 0/8] ASoC: max98396: Some assorted fixes and additions Mark Brown 2022-06-27 20:19 ` Mark Brown 2022-06-27 20:26 ` Daniel Mack 2022-06-27 20:26 ` Daniel Mack 2022-06-27 22:23 ` Mark Brown 2022-06-27 22:23 ` Mark Brown
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220624104712.1934484-2-daniel@zonque.org \ --to=daniel@zonque.org \ --cc=alsa-devel@alsa-project.org \ --cc=broonie@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=ryan.lee.analog@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.